# -*- text -*-
##
## dialup.conf -- Oracle configuration for default schema (schema.sql)
##
## $Id$
#######################################################################
# Query config: Username
#######################################################################
# This is the username that will get substituted, escaped, and added
# as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below
# everywhere a username substitution is needed so you you can be sure
# the username passed from the client is escaped properly.
#
# Uncomment the next line, if you want the sql_user_name to mean:
#
# Use Stripped-User-Name, if it's there.
# Else use User-Name, if it's there,
# Else use hard-coded string "DEFAULT" as the user name.
#sql_user_name = "%{Stripped-User-Name:-%{User-Name:-DEFAULT}}"
#
sql_user_name = "%{User-Name}"
#######################################################################
# Default profile
#######################################################################
# This is the default profile. It is found in SQL by group membership.
# That means that this profile must be a member of at least one group
# which will contain the corresponding check and reply items.
# This profile will be queried in the authorize section for every user.
# The point is to assign all users a default profile without having to
# manually add each one to a group that will contain the profile.
# The SQL module will also honor the User-Profile attribute. This
# attribute can be set anywhere in the authorize section (ie the users
# file). It is found exactly as the default profile is found.
# If it is set then it will *overwrite* the default profile setting.
# The idea is to select profiles based on checks on the incoming packets,
# not on user group membership. For example:
# -- users file --
# DEFAULT Service-Type == Outbound-User, User-Profile := "outbound"
# DEFAULT Service-Type == Framed-User, User-Profile := "framed"
#
# By default the default_user_profile is not set
#
#default_user_profile = "DEFAULT"
#
# Determines if we will query the default_user_profile or the User-Profile
# if the user is not found. If the profile is found then we consider the user
# found. By default this is set to 'no'.
#
#query_on_not_found = no
#######################################################################
# NAS Query
#######################################################################
# This query retrieves the radius clients
#
# 0. Row ID (currently unused)
# 1. Name (or IP address)
# 2. Shortname
# 3. Type
# 4. Secret
# 5. Virtual server
#######################################################################
nas_query = "SELECT id, nasname, shortname, type, secret, server FROM ${nas_table}"
#######################################################################
# Authorization Queries
#######################################################################
# These queries compare the check items for the user
# in ${authcheck_table} and setup the reply items in
# ${authreply_table}. You can use any query/tables
# you want, but the return data for each row MUST
# be in the following order:
#
# 0. Row ID (currently unused)
# 1. UserName/GroupName
# 2. Item Attr Name
# 3. Item Attr Value
# 4. Item Attr Operation
#######################################################################
#
# WARNING: Oracle is case sensitive
#
# The main difference between MySQL and Oracle queries is the date format.
# You must use the TO_DATE function to transform the radius date format to
# the Oracle date format, and put NULL otherwise '0' in a void date field.
#
#######################################################################
authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM ${authcheck_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM ${authreply_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.op FROM ${groupcheck_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id"
authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.op FROM ${groupreply_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id"
#######################################################################
# Accounting Queries
#######################################################################
# accounting_onoff_query - query for Accounting On/Off packets
# accounting_update_query - query for Accounting update packets
# accounting_update_query_alt - query for Accounting update packets
# (alternate in case first query fails)
# accounting_start_query - query for Accounting start packets
# accounting_start_query_alt - query for Accounting start packets
# (alternate in case first query fails)
# accounting_stop_query - query for Accounting stop packets
# accounting_stop_query_alt - query for Accounting start packets
# (alternate in case first query doesn't
# affect any existing rows in the table)
#######################################################################
accounting_onoff_query = "UPDATE ${acct_table1} SET AcctStopTime=TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctSessionTime=round((TO_DATE('%S','yyyy-mm-dd hh24:mi:ss')-TO_DATE(TO_CHAR(acctstarttime, 'yyyy-mm-dd hh24:mi:ss'),'yyyy-mm-dd hh24:mi:ss'))*86400), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time:-0} WHERE AcctStopTime IS NULL AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStartTime <= TO_DATE('%S','yyyy-mm-dd hh24:mi:ss')"
accounting_update_query = "UPDATE ${acct_table1} \
SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', ''), \
AcctSessionTime = '%{Acct-Session-Time}', \
AcctInputOctets = '%{Acct-Input-Octets}' + ('%{%{Acct-Input-Gigawords}:-0}' * 4294967296), \
AcctOutputOctets = '%{Acct-Output-Octets}' + ('%{%{Acct-Output-Gigawords}:-0}' * 4294967296) \
WHERE \
AcctSessionId = '%{Acct-Session-Id}' AND \
UserName = '%{SQL-User-Name}' AND \
NASIPAddress= '%{NAS-IP-Address}' AND \
AcctStopTime IS NULL"
accounting_update_query_alt = "INSERT into ${acct_table1} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey) \
VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', \
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', \
'%{NAS-Port-Type}', NULL, '%{Acct-Session-Time}', '%{Acct-Authentic}', '', \
'%{Acct-Input-Octets}' + ('%{%{Acct-Input-Gigawords}:-0}' * 4294967296), \
'%{Acct-Output-Octets}' + ('%{%{Acct-Output-Gigawords}:-0}' * 4294967296), \
'%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', \
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = "INSERT into ${acct_table1} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, XAscendSessionSvrKey) \
VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = "UPDATE ${acct_table1} SET AcctStartTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctStartDelay = '%{Acct-Delay-Time:-0}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
accounting_stop_query = "UPDATE ${acct_table2} \
SET AcctStopTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), \
AcctSessionTime = '%{Acct-Session-Time}', \
AcctInputOctets = '%{Acct-Input-Octets}' + ('%{%{Acct-Input-Gigawords}:-0}' * 4294967296), \
AcctOutputOctets = '%{Acct-Output-Octets}' + ('%{%{Acct-Output-Gigawords}:-0}' * 4294967296), \
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time:-0}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
# Optional Query - pnixon
#accounting_stop_query =3D "UPDATE ${acct_table2} SET AcctStopTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctSessionTime = (substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+7,2) + substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+4,2)*60 + substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+1,2)*3600 + trunc(to_number(substr((sysdate-acctstarttime),1,instr(sysdate-acctstarttime,' '))))*86400), AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId =3D '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"
accounting_stop_query_alt = "INSERT into ${acct_table2} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) \
VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', \
'%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', NULL, TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), \
'%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', \
'%{Acct-Input-Octets}' + ('%{%{Acct-Input-Gigawords}:-0}' * 4294967296), \
'%{Acct-Output-Octets}' + ('%{%{Acct-Output-Gigawords}:-0}' * 4294967296), \
'%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', \
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time:-0}')"
#######################################################################
# Simultaneous Use Checking Queries
#######################################################################
# simul_count_query - query for the number of current connections
# - If this is not defined, no simultaneouls use checking
# - will be performed by this module instance
# simul_verify_query - query to return details of current connections for verification
# - Leave blank or commented out to disable verification step
# - Note that the returned field order should not be changed.
#######################################################################
# Uncomment simul_count_query to enable simultaneous use checking
# simul_count_query = "SELECT COUNT(*) FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL"
simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL"
#######################################################################
# Group Membership Queries
#######################################################################
# group_membership_query - Check user group membership
#######################################################################
group_membership_query = "SELECT GroupName FROM ${usergroup_table} WHERE UserName='%{SQL-User-Name}'"
# Authentication Logging Queries
#######################################################################
# postauth_query - Insert some info after authentication
#######################################################################
postauth_query = "INSERT INTO ${postauth_table} \
(username, pass, reply, authdate) \
VALUES ( \
'%{User-Name}', \
'%{%{User-Password}:-%{Chap-Password}}', \
'%{reply:Packet-Type}', TO_TIMESTAMP('%S','YYYY-MM-DDHH24:MI:SS'))"