# -*- text -*- ## ## dialup.conf -- Oracle configuration for default schema (schema.sql) ## ## $Id$ ####################################################################### # Query config: Username ####################################################################### # This is the username that will get substituted, escaped, and added # as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below # everywhere a username substitution is needed so you you can be sure # the username passed from the client is escaped properly. # # Uncomment the next line, if you want the sql_user_name to mean: # # Use Stripped-User-Name, if it's there. # Else use User-Name, if it's there, # Else use hard-coded string "DEFAULT" as the user name. #sql_user_name = "%{Stripped-User-Name:-%{User-Name:-DEFAULT}}" # sql_user_name = "%{User-Name}" ####################################################################### # Default profile ####################################################################### # This is the default profile. It is found in SQL by group membership. # That means that this profile must be a member of at least one group # which will contain the corresponding check and reply items. # This profile will be queried in the authorize section for every user. # The point is to assign all users a default profile without having to # manually add each one to a group that will contain the profile. # The SQL module will also honor the User-Profile attribute. This # attribute can be set anywhere in the authorize section (ie the users # file). It is found exactly as the default profile is found. # If it is set then it will *overwrite* the default profile setting. # The idea is to select profiles based on checks on the incoming packets, # not on user group membership. For example: # -- users file -- # DEFAULT Service-Type == Outbound-User, User-Profile := "outbound" # DEFAULT Service-Type == Framed-User, User-Profile := "framed" # # By default the default_user_profile is not set # #default_user_profile = "DEFAULT" # # Determines if we will query the default_user_profile or the User-Profile # if the user is not found. If the profile is found then we consider the user # found. By default this is set to 'no'. # #query_on_not_found = no ####################################################################### # NAS Query ####################################################################### # This query retrieves the radius clients # # 0. Row ID (currently unused) # 1. Name (or IP address) # 2. Shortname # 3. Type # 4. Secret # 5. Virtual server ####################################################################### nas_query = "SELECT id, nasname, shortname, type, secret, server FROM ${nas_table}" ####################################################################### # Authorization Queries ####################################################################### # These queries compare the check items for the user # in ${authcheck_table} and setup the reply items in # ${authreply_table}. You can use any query/tables # you want, but the return data for each row MUST # be in the following order: # # 0. Row ID (currently unused) # 1. UserName/GroupName # 2. Item Attr Name # 3. Item Attr Value # 4. Item Attr Operation ####################################################################### # # WARNING: Oracle is case sensitive # # The main difference between MySQL and Oracle queries is the date format. # You must use the TO_DATE function to transform the radius date format to # the Oracle date format, and put NULL otherwise '0' in a void date field. # ####################################################################### authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM ${authcheck_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM ${authreply_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.op FROM ${groupcheck_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id" authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.op FROM ${groupreply_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id" ####################################################################### # Accounting Queries ####################################################################### # accounting_onoff_query - query for Accounting On/Off packets # accounting_update_query - query for Accounting update packets # accounting_update_query_alt - query for Accounting update packets # (alternate in case first query fails) # accounting_start_query - query for Accounting start packets # accounting_start_query_alt - query for Accounting start packets # (alternate in case first query fails) # accounting_stop_query - query for Accounting stop packets # accounting_stop_query_alt - query for Accounting start packets # (alternate in case first query doesn't # affect any existing rows in the table) ####################################################################### accounting_onoff_query = "UPDATE ${acct_table1} SET AcctStopTime=TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctSessionTime=round((TO_DATE('%S','yyyy-mm-dd hh24:mi:ss')-TO_DATE(TO_CHAR(acctstarttime, 'yyyy-mm-dd hh24:mi:ss'),'yyyy-mm-dd hh24:mi:ss'))*86400), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time:-0} WHERE AcctStopTime IS NULL AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStartTime <= TO_DATE('%S','yyyy-mm-dd hh24:mi:ss')" accounting_update_query = "UPDATE ${acct_table1} \ SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', ''), \ AcctSessionTime = '%{Acct-Session-Time}', \ AcctInputOctets = '%{Acct-Input-Octets}' + ('%{%{Acct-Input-Gigawords}:-0}' * 4294967296), \ AcctOutputOctets = '%{Acct-Output-Octets}' + ('%{%{Acct-Output-Gigawords}:-0}' * 4294967296) \ WHERE \ AcctSessionId = '%{Acct-Session-Id}' AND \ UserName = '%{SQL-User-Name}' AND \ NASIPAddress= '%{NAS-IP-Address}' AND \ AcctStopTime IS NULL" accounting_update_query_alt = "INSERT into ${acct_table1} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey) \ VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', \ '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', \ '%{NAS-Port-Type}', NULL, '%{Acct-Session-Time}', '%{Acct-Authentic}', '', \ '%{Acct-Input-Octets}' + ('%{%{Acct-Input-Gigawords}:-0}' * 4294967296), \ '%{Acct-Output-Octets}' + ('%{%{Acct-Output-Gigawords}:-0}' * 4294967296), \ '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', \ '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = "INSERT into ${acct_table1} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, XAscendSessionSvrKey) \ VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = "UPDATE ${acct_table1} SET AcctStartTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctStartDelay = '%{Acct-Delay-Time:-0}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL" accounting_stop_query = "UPDATE ${acct_table2} \ SET AcctStopTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), \ AcctSessionTime = '%{Acct-Session-Time}', \ AcctInputOctets = '%{Acct-Input-Octets}' + ('%{%{Acct-Input-Gigawords}:-0}' * 4294967296), \ AcctOutputOctets = '%{Acct-Output-Octets}' + ('%{%{Acct-Output-Gigawords}:-0}' * 4294967296), \ AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time:-0}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL" # Optional Query - pnixon #accounting_stop_query =3D "UPDATE ${acct_table2} SET AcctStopTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctSessionTime = (substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+7,2) + substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+4,2)*60 + substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+1,2)*3600 + trunc(to_number(substr((sysdate-acctstarttime),1,instr(sysdate-acctstarttime,' '))))*86400), AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId =3D '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL" accounting_stop_query_alt = "INSERT into ${acct_table2} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) \ VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', \ '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', NULL, TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), \ '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', \ '%{Acct-Input-Octets}' + ('%{%{Acct-Input-Gigawords}:-0}' * 4294967296), \ '%{Acct-Output-Octets}' + ('%{%{Acct-Output-Gigawords}:-0}' * 4294967296), \ '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', \ '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time:-0}')" ####################################################################### # Simultaneous Use Checking Queries ####################################################################### # simul_count_query - query for the number of current connections # - If this is not defined, no simultaneouls use checking # - will be performed by this module instance # simul_verify_query - query to return details of current connections for verification # - Leave blank or commented out to disable verification step # - Note that the returned field order should not be changed. ####################################################################### # Uncomment simul_count_query to enable simultaneous use checking # simul_count_query = "SELECT COUNT(*) FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL" simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL" ####################################################################### # Group Membership Queries ####################################################################### # group_membership_query - Check user group membership ####################################################################### group_membership_query = "SELECT GroupName FROM ${usergroup_table} WHERE UserName='%{SQL-User-Name}'" # Authentication Logging Queries ####################################################################### # postauth_query - Insert some info after authentication ####################################################################### postauth_query = "INSERT INTO ${postauth_table} \ (username, pass, reply, authdate) \ VALUES ( \ '%{User-Name}', \ '%{%{User-Password}:-%{Chap-Password}}', \ '%{reply:Packet-Type}', TO_TIMESTAMP('%S','YYYY-MM-DDHH24:MI:SS'))"