if_arp.h   [plain text]


/*
 * Copyright (c) 2000 Apple Computer, Inc. All rights reserved.
 *
 * @APPLE_LICENSE_HEADER_START@
 * 
 * The contents of this file constitute Original Code as defined in and
 * are subject to the Apple Public Source License Version 1.1 (the
 * "License").  You may not use this file except in compliance with the
 * License.  Please obtain a copy of the License at
 * http://www.apple.com/publicsource and read it before using this file.
 * 
 * This Original Code and all software distributed under the License are
 * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER
 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.  Please see the
 * License for the specific language governing rights and limitations
 * under the License.
 * 
 * @APPLE_LICENSE_HEADER_END@
 */
/*
 * Copyright (c) 1986, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)if_arp.h	8.1 (Berkeley) 6/10/93
 * $FreeBSD: src/sys/net/if_arp.h,v 1.14.2.1 2000/07/11 20:46:55 archie Exp $
 */

#ifndef _NET_IF_ARP_H_
#define	_NET_IF_ARP_H_
#include <sys/appleapiopts.h>
#include <netinet/in.h>

/*
 * Address Resolution Protocol.
 *
 * See RFC 826 for protocol description.  ARP packets are variable
 * in size; the arphdr structure defines the fixed-length portion.
 * Protocol type values are the same as those for 10 Mb/s Ethernet.
 * It is followed by the variable-sized fields ar_sha, arp_spa,
 * arp_tha and arp_tpa in that order, according to the lengths
 * specified.  Field names used correspond to RFC 826.
 */
struct	arphdr {
	u_short	ar_hrd;		/* format of hardware address */
#define ARPHRD_ETHER 	1	/* ethernet hardware format */
#define ARPHRD_IEEE802	6	/* token-ring hardware format */
#define ARPHRD_FRELAY 	15	/* frame relay hardware format */
	u_short	ar_pro;		/* format of protocol address */
	u_char	ar_hln;		/* length of hardware address */
	u_char	ar_pln;		/* length of protocol address */
	u_short	ar_op;		/* one of: */
#define	ARPOP_REQUEST	1	/* request to resolve address */
#define	ARPOP_REPLY	2	/* response to previous request */
#define	ARPOP_REVREQUEST 3	/* request protocol address given hardware */
#define	ARPOP_REVREPLY	4	/* response giving protocol address */
#define ARPOP_INVREQUEST 8 	/* request to identify peer */
#define ARPOP_INVREPLY	9	/* response identifying peer */
/*
 * The remaining fields are variable in size,
 * according to the sizes above.
 */
#ifdef COMMENT_ONLY
	u_char	ar_sha[];	/* sender hardware address */
	u_char	ar_spa[];	/* sender protocol address */
	u_char	ar_tha[];	/* target hardware address */
	u_char	ar_tpa[];	/* target protocol address */
#endif
};

/*
 * ARP ioctl request
 */
struct arpreq {
	struct	sockaddr arp_pa;		/* protocol address */
	struct	sockaddr arp_ha;		/* hardware address */
	int	arp_flags;			/* flags */
};
/*  arp_flags and at_flags field values */
#define	ATF_INUSE	0x01	/* entry in use */
#define ATF_COM		0x02	/* completed entry (enaddr valid) */
#define	ATF_PERM	0x04	/* permanent entry */
#define	ATF_PUBL	0x08	/* publish entry (respond for other host) */
#define	ATF_USETRAILERS	0x10	/* has requested trailers */

#ifdef __APPLE_API_UNSTABLE

#ifdef __APPLE__
/*
 * Ethernet multicast address structure.  There is one of these for each
 * multicast address or range of multicast addresses that we are supposed
 * to listen to on a particular interface.  They are kept in a linked list,
 * rooted in the interface's arpcom structure.  (This really has nothing to
 * do with ARP, or with the Internet address family, but this appears to be
 * the minimally-disrupting place to put it.)
 */
struct ether_multi {
	u_char	enm_addrlo[6];		/* low  or only address of range */
	u_char	enm_addrhi[6];		/* high or only address of range */
	struct	arpcom *enm_ac;		/* back pointer to arpcom */
	u_int	enm_refcount;		/* no. claims to this addr/range */
	struct	ether_multi *enm_next;	/* ptr to next ether_multi */
};

/*
 * Structure used by macros below to remember position when stepping through
 * all of the ether_multi records.
 */
struct ether_multistep {
	struct ether_multi  *e_enm;
};
#endif /* __APPLE__ */

#ifdef KERNEL
/*
 * Structure shared between the ethernet driver modules and
 * the address resolution code.  For example, each ec_softc or il_softc
 * begins with this structure.
 */
struct	arpcom {
	/*
	 * The ifnet struct _must_ be at the head of this structure.
	 */
	struct 	ifnet ac_if;		/* network-visible interface */
	u_char	ac_enaddr[6];		/* ethernet hardware address */
#ifdef __APPLE__
	struct	in_addr ac_ipaddr;	/* copy of ip address- XXX */
	struct	ether_multi *ac_multiaddrs; /* list of ether multicast addrs */
#endif
	int	ac_multicnt;		/* length of ac_multiaddrs list */
#ifndef __APPLE__
	void	*ac_netgraph;		/* ng_ether(4) netgraph node info */
#endif
};


#endif
#endif /* __APPLE_API_UNSTABLE */

#endif /* !_NET_IF_ARP_H_ */