""" Please make sure you read the README file COMPLETELY BEFORE reading anything below.
It is very critical that you read coding guidelines in Section E in README file.
"""
from xnu import *
import sys
import shlex
from utils import *
import xnudefines
from process import *
@lldb_command('memstats')
def Memstats(cmd_args=None):
""" Prints out a summary of various memory statistics. In particular vm_page_wire_count should be greater than 2K or you are under memory pressure.
"""
try:
print "memorystatus_level: {: >10d}".format(kern.globals.memorystatus_level)
except ValueError:
pass
try:
print "memorystatus_available_pages: {: >10d}".format(kern.globals.memorystatus_available_pages)
except ValueError:
pass
print "vm_page_throttled_count: {: >10d}".format(kern.globals.vm_page_throttled_count)
print "vm_page_active_count: {: >10d}".format(kern.globals.vm_page_active_count)
print "vm_page_inactive_count: {: >10d}".format(kern.globals.vm_page_inactive_count)
print "vm_page_wire_count: {: >10d}".format(kern.globals.vm_page_wire_count)
print "vm_page_free_count: {: >10d}".format(kern.globals.vm_page_free_count)
print "vm_page_purgeable_count: {: >10d}".format(kern.globals.vm_page_purgeable_count)
print "vm_page_inactive_target: {: >10d}".format(kern.globals.vm_page_inactive_target)
print "vm_page_free_target: {: >10d}".format(kern.globals.vm_page_free_target)
print "inuse_ptepages_count: {: >10d}".format(kern.globals.inuse_ptepages_count)
print "vm_page_free_reserved: {: >10d}".format(kern.globals.vm_page_free_reserved)
@xnudebug_test('test_memstats')
def TestMemstats(kernel_target, config, lldb_obj, isConnected ):
""" Test the functionality of memstats command
returns
- False on failure
- True on success
"""
if not isConnected:
print "Target is not connected. Cannot test memstats"
return False
res = lldb.SBCommandReturnObject()
lldb_obj.debugger.GetCommandInterpreter().HandleCommand("memstats", res)
result = res.GetOutput()
if result.split(":")[1].strip().find('None') == -1 :
return True
else:
return False
def CalculateLedgerPeak(phys_footprint_entry):
""" Internal function to calculate ledger peak value for the given phys footprint entry
params: phys_footprint_entry - value representing struct ledger_entry *
return: value - representing the ledger peak for the given phys footprint entry
"""
now = kern.globals.sched_tick / 20
ledger_peak = phys_footprint_entry.le_credit - phys_footprint_entry.le_debit
if (now - phys_footprint_entry._le.le_peaks[0].le_time <= 1) and (phys_footprint_entry._le.le_peaks[0].le_max > ledger_peak):
ledger_peak = phys_footprint_entry._le.le_peaks[0].le_max
if (now - phys_footprint_entry._le.le_peaks[1].le_time <= 1) and (phys_footprint_entry._le.le_peaks[1].le_max > ledger_peak):
ledger_peak = phys_footprint_entry._le.le_peaks[1].le_max
return ledger_peak
@header("{: >8s} {: >22s} {: >22s} {: >11s} {: >11s} {: >12s} {: >10s} {: >13s} {: ^10s} {: >8s} {: <20s}\n".format(
'pid', 'effective priority', 'requested priority', 'state', 'user_data', 'physical', 'iokit', 'footprint',
'spike', 'limit', 'command'))
def GetMemoryStatusNode(proc_val):
""" Internal function to get memorystatus information from the given proc
params: proc - value representing struct proc *
return: str - formatted output information for proc object
"""
out_str = ''
task_val = Cast(proc_val.task, 'task *')
task_ledgerp = task_val.ledger
task_physmem_footprint_ledger_entry = task_ledgerp.l_entries[kern.globals.task_ledgers.phys_mem]
task_iokit_footprint_ledger_entry = task_ledgerp.l_entries[kern.globals.task_ledgers.iokit_mapped]
task_phys_footprint_ledger_entry = task_ledgerp.l_entries[kern.globals.task_ledgers.phys_footprint]
page_size = kern.globals.page_size
phys_mem_footprint = (task_physmem_footprint_ledger_entry.le_credit - task_physmem_footprint_ledger_entry.le_debit) / page_size
iokit_footprint = (task_iokit_footprint_ledger_entry.le_credit - task_iokit_footprint_ledger_entry.le_debit) / page_size
phys_footprint = (task_phys_footprint_ledger_entry.le_credit - task_phys_footprint_ledger_entry.le_debit) / page_size
phys_footprint_limit = task_phys_footprint_ledger_entry.le_limit / page_size
ledger_peak = CalculateLedgerPeak(task_phys_footprint_ledger_entry)
phys_footprint_spike = ledger_peak / page_size
format_string = '{0: >8d} {1: >22d} {2: >22d} {3: #011x} {4: #011x} {5: >12d} {6: >10d} {7: >13d}'
out_str += format_string.format(proc_val.p_pid, proc_val.p_memstat_effectivepriority,
proc_val.p_memstat_requestedpriority, proc_val.p_memstat_state, proc_val.p_memstat_userdata,
phys_mem_footprint, iokit_footprint, phys_footprint)
if phys_footprint != phys_footprint_spike:
out_str += "{: ^12d}".format(phys_footprint_spike)
else:
out_str += "{: ^12s}".format('-')
out_str += "{: 8d} {: <20s}\n".format(phys_footprint_limit, proc_val.p_comm)
return out_str
@lldb_command('showmemorystatus')
def ShowMemoryStatus(cmd_args=None):
""" Routine to display each entry in jetsam list with a summary of pressure statistics
Usage: showmemorystatus
"""
bucket_index = 0
bucket_count = 20
print GetMemoryStatusNode.header
print "{: >91s} {: >10s} {: >13s} {: ^10s} {: >8s}\n".format("(pages)", "(pages)", "(pages)",
"(pages)", "(pages)")
while bucket_index < bucket_count:
current_bucket = kern.globals.memstat_bucket[bucket_index]
current_list = current_bucket.list
current_proc = Cast(current_list.tqh_first, 'proc *')
while unsigned(current_proc) != 0:
print GetMemoryStatusNode(current_proc)
current_proc = current_proc.p_memstat_list.tqe_next
bucket_index += 1
print "\n\n"
Memstats()
@lldb_type_summary(['zone','zone_t'])
@header("{:^18s} {:>10s} {:>10s} {:>10s} {:>10s} {:>10s} {:>10s} {:>10s}({:>6s} {:>6s} {:>6s}) {:^15s} {:<20s}".format(
'ZONE', 'TOT_SZ', 'PAGE_COUNT', 'ALLOC_ELTS', 'FREE_ELTS', 'FREE_SZ', 'ELT_SZ', 'ALLOC', 'ELTS', 'PGS', 'WASTE', 'FLAGS', 'NAME'))
def GetZoneSummary(zone):
""" Summarize a zone with important information. See help zprint for description of each field
params:
zone: value - obj representing a zone in kernel
returns:
str - summary of the zone
"""
out_string = ""
format_string = '{:#018x} {:10d} {:10d} {:10d} {:10d} {:10d} {:10d} {:10d} {:6d} {:6d} {:6d} {markings} {name:s} '
pagesize = kern.globals.page_size
free_elements = zone.countfree
free_size = free_elements * zone.elem_size
alloc_pages = zone.alloc_size / pagesize
if zone.use_page_list :
metadata_size = sizeof('struct zone_page_metadata')
metadata_offset = metadata_size
if ((metadata_size % zone.elem_size) != 0) :
metadata_offset += zone.elem_size - (metadata_size % zone.elem_size)
alloc_count = ((pagesize - metadata_offset) / zone.elem_size) * alloc_pages
alloc_waste = metadata_offset * alloc_pages
else :
alloc_count = zone.alloc_size / zone.elem_size
alloc_waste = zone.alloc_size % zone.elem_size
marks = [
["collectable", "C"],
["expandable", "X"],
["noencrypt", "$"],
["caller_acct", "@"],
["exhaustible", "H"],
["allows_foreign", "F"],
["async_prio_refill", "R"],
["no_callout", "O"],
["zleak_on", "L"],
["doing_alloc_without_vm_priv", "A"],
["doing_alloc_with_vm_priv", "S"],
["waiting", "W"],
["doing_gc", "G"],
["use_page_list", "P"]
]
if kern.arch == 'x86_64':
marks.append(["gzalloc_exempt", "M"])
marks.append(["alignment_required", "N"])
markings=""
for mark in marks:
if zone.__getattr__(mark[0]) :
markings+=mark[1]
else:
markings+=" "
out_string += format_string.format(zone, zone.cur_size, zone.page_count,
zone.count, free_elements, free_size,
zone.elem_size, zone.alloc_size, alloc_count,
alloc_pages, alloc_waste, name = zone.zone_name, markings=markings)
if zone.exhaustible :
out_string += "(max: {:d})".format(zone.max_size)
return out_string
@lldb_command('zprint')
def Zprint(cmd_args=None):
""" Routine to print a summary listing of all the kernel zones
All columns are printed in decimal
Legend:
C - collectable
X - expandable
$ - not encrypted during hibernation
@ - allocs and frees are accounted to caller process for KPRVT
H - exhaustible
F - allows foreign memory (memory not allocated from zone_map)
M - gzalloc will avoid monitoring this zone
R - will be refilled when below low water mark
O - does not allow refill callout to fill zone on noblock allocation
N - zone requires alignment (avoids padding this zone for debugging)
A - currently trying to allocate more backing memory from kernel_memory_allocate without VM priv
S - currently trying to allocate more backing memory from kernel_memory_allocate with VM priv
W - another thread is waiting for more memory
L - zone is being monitored by zleaks
G - currently running GC
P - uses zone_page_metadata
"""
global kern
print GetZoneSummary.header
for zval in kern.zones:
print GetZoneSummary(zval)
@xnudebug_test('test_zprint')
def TestZprint(kernel_target, config, lldb_obj, isConnected ):
""" Test the functionality of zprint command
returns
- False on failure
- True on success
"""
if not isConnected:
print "Target is not connected. Cannot test memstats"
return False
res = lldb.SBCommandReturnObject()
lldb_obj.debugger.GetCommandInterpreter().HandleCommand("zprint", res)
result = res.GetOutput()
if len(result.split("\n")) > 2:
return True
else:
return False
def ShowZfreeListHeader(zone):
""" Helper routine to print a header for zone freelist.
(Since the freelist does not have a custom type, this is not defined as a Type Summary).
params:
zone:zone_t - Zone object to print header info
returns:
None
"""
scaled_factor = (unsigned(kern.globals.zp_factor) +
(unsigned(zone.elem_size) >> unsigned(kern.globals.zp_scale)))
out_str = ""
out_str += "{0: <9s} {1: <12s} {2: <18s} {3: <18s} {4: <6s}\n".format('ELEM_SIZE', 'COUNT', 'NCOOKIE', 'PCOOKIE', 'FACTOR')
out_str += "{0: <9d} {1: <12d} 0x{2:0>16x} 0x{3:0>16x} {4: <2d}/{5: <2d}\n\n".format(
zone.elem_size, zone.count, kern.globals.zp_nopoison_cookie, kern.globals.zp_poisoned_cookie, zone.zp_count, scaled_factor)
out_str += "{0: <7s} {1: <18s} {2: <18s} {3: <18s} {4: <18s} {5: <18s} {6: <14s}\n".format(
'NUM', 'ELEM', 'NEXT', 'BACKUP', '^ NCOOKIE', '^ PCOOKIE', 'POISON (PREV)')
print out_str
def ShowZfreeListChain(zone, zfirst, zlimit):
""" Helper routine to print a zone free list chain
params:
zone: zone_t - Zone object
zfirst: void * - A pointer to the first element of the free list chain
zlimit: int - Limit for the number of elements to be printed by showzfreelist
returns:
None
"""
current = Cast(zfirst, 'void *')
while ShowZfreeList.elts_found < zlimit:
ShowZfreeList.elts_found += 1
znext = dereference(Cast(current, 'vm_offset_t *'))
backup_ptr = kern.GetValueFromAddress((unsigned(Cast(current, 'vm_offset_t')) + unsigned(zone.elem_size) - sizeof('vm_offset_t')), 'vm_offset_t *')
backup_val = dereference(backup_ptr)
n_unobfuscated = (unsigned(backup_val) ^ unsigned(kern.globals.zp_nopoison_cookie))
p_unobfuscated = (unsigned(backup_val) ^ unsigned(kern.globals.zp_poisoned_cookie))
poison_str = ''
if p_unobfuscated == unsigned(znext):
poison_str = "P ({0: <d})".format(ShowZfreeList.elts_found - ShowZfreeList.last_poisoned)
ShowZfreeList.last_poisoned = ShowZfreeList.elts_found
else:
if n_unobfuscated != unsigned(znext):
poison_str = "INVALID"
print "{0: <7d} 0x{1:0>16x} 0x{2:0>16x} 0x{3:0>16x} 0x{4:0>16x} 0x{5:0>16x} {6: <14s}\n".format(
ShowZfreeList.elts_found, unsigned(current), unsigned(znext), unsigned(backup_val), n_unobfuscated, p_unobfuscated, poison_str)
if unsigned(znext) == 0:
break
current = Cast(znext, 'void *')
@static_var('elts_found',0)
@static_var('last_poisoned',0)
@lldb_command('showzfreelist')
def ShowZfreeList(cmd_args=None):
""" Walk the freelist for a zone, printing out the primary and backup next pointers, the poisoning cookies, and the poisoning status of each element.
Usage: showzfreelist <zone> [iterations]
Will walk up to 50 elements by default, pass a limit in 'iterations' to override.
"""
if not cmd_args:
print ShowZfreeList.__doc__
return
ShowZfreeList.elts_found = 0
ShowZfreeList.last_poisoned = 0
zone = kern.GetValueFromAddress(cmd_args[0], 'struct zone *')
zlimit = 50
if len(cmd_args) >= 2:
zlimit = ArgumentStringToInt(cmd_args[1])
ShowZfreeListHeader(zone)
if unsigned(zone.use_page_list) == 1:
if unsigned(zone.allows_foreign) == 1:
for free_page_meta in IterateQueue(zone.pages.any_free_foreign, 'struct zone_page_metadata *', 'pages'):
if ShowZfreeList.elts_found == zlimit:
break
zfirst = Cast(free_page_meta.elements, 'void *')
if unsigned(zfirst) != 0:
ShowZfreeListChain(zone, zfirst, zlimit)
for free_page_meta in IterateQueue(zone.pages.intermediate, 'struct zone_page_metadata *', 'pages'):
if ShowZfreeList.elts_found == zlimit:
break
zfirst = Cast(free_page_meta.elements, 'void *')
if unsigned(zfirst) != 0:
ShowZfreeListChain(zone, zfirst, zlimit)
for free_page_meta in IterateQueue(zone.pages.all_free, 'struct zone_page_metadata *', 'pages'):
if ShowZfreeList.elts_found == zlimit:
break
zfirst = Cast(free_page_meta.elements, 'void *')
if unsigned(zfirst) != 0:
ShowZfreeListChain(zone, zfirst, zlimit)
else:
zfirst = Cast(zone.free_elements, 'void *')
if unsigned(zfirst) != 0:
ShowZfreeListChain(zone, zfirst, zlimit)
if ShowZfreeList.elts_found == zlimit:
print "Stopped at {0: <d} elements!".format(zlimit)
else:
print "Found {0: <d} elements!".format(ShowZfreeList.elts_found)
@lldb_command('zstack')
def Zstack(cmd_args=None):
""" Zone leak debugging: Print the stack trace of log element at <index>. If a <count> is supplied, it prints <count> log elements starting at <index>.
Usage: zstack <index> [<count>]
The suggested usage is to look at indexes below zcurrent and look for common stack traces.
The stack trace that occurs the most is probably the cause of the leak. Find the pc of the
function calling into zalloc and use the countpcs command to find out how often that pc occurs in the log.
The pc occuring in a high percentage of records is most likely the source of the leak.
The findoldest command is also useful for leak debugging since it identifies the oldest record
in the log, which may indicate the leaker.
"""
if not cmd_args:
print Zstack.__doc__
return
if int(kern.globals.log_records) == 0:
print "Zone logging not enabled. Add 'zlog=<zone name>' to boot-args."
return
if int(kern.globals.zlog_btlog) == 0:
print "Zone logging enabled, but zone has not been initialized yet."
return
count = 1
if len(cmd_args) >= 2:
count = ArgumentStringToInt(cmd_args[1])
zstack_index = unsigned(cmd_args[0])
while count and (zstack_index != 0xffffff):
zstack_record_offset = zstack_index * unsigned(kern.globals.zlog_btlog.btrecord_size)
zstack_record = kern.GetValueFromAddress(unsigned(kern.globals.zlog_btlog.btrecords) + zstack_record_offset, 'btlog_record_t *')
ShowZStackRecord(zstack_record, zstack_index)
zstack_index = zstack_record.next
count -= 1
@lldb_command('findoldest')
def FindOldest(cmd_args=None):
""" Zone leak debugging: find and print the oldest record in the log.
Once it prints a stack trace, find the pc of the caller above all the zalloc, kalloc and
IOKit layers. Then use the countpcs command to see how often this caller has allocated
memory. A caller with a high percentage of records in the log is probably the leaker.
"""
if int(kern.globals.log_records) == 0:
print FindOldest.__doc__
return
if int(kern.globals.zlog_btlog) == 0:
print "Zone logging enabled, but zone has not been initialized yet."
return
index = kern.globals.zlog_btlog.head
if unsigned(index) != 0xffffff:
print "Oldest record is at log index: {0: <d}".format(index)
Zstack([index])
else:
print "No Records Present"
@lldb_command('countpcs')
def Countpcs(cmd_args=None):
""" Zone leak debugging: search the log and print a count of all log entries that contain the given <pc>
in the stack trace.
Usage: countpcs <pc>
This is useful for verifying a suspected <pc> as being the source of
the leak. If a high percentage of the log entries contain the given <pc>, then it's most
likely the source of the leak. Note that this command can take several minutes to run.
"""
if not cmd_args:
print Countpcs.__doc__
return
if int(kern.globals.log_records) == 0:
print "Zone logging not enabled. Add 'zlog=<zone name>' to boot-args."
return
if int(kern.globals.zlog_btlog) == 0:
print "Zone logging enabled, but zone has not been initialized yet."
return
cpcs_index = unsigned(kern.globals.zlog_btlog.head)
target_pc = unsigned(kern.GetValueFromAddress(cmd_args[0], 'void *'))
found = 0
depth = unsigned(kern.globals.zlog_btlog.btrecord_btdepth)
while cpcs_index != 0xffffff:
cpcs_record_offset = cpcs_index * unsigned(kern.globals.zlog_btlog.btrecord_size)
cpcs_record = kern.GetValueFromAddress(unsigned(kern.globals.zlog_btlog.btrecords) + cpcs_record_offset, 'btlog_record_t *')
frame = 0
while frame < depth:
frame_pc = unsigned(cpcs_record.bt[frame])
if frame_pc == target_pc:
found += 1
break
frame += 1
cpcs_index = cpcs_record.next
print "Occured {0: <d} times in log ({1: <d}{2: <s} of records)".format(found, (found * 100)/unsigned(kern.globals.zlog_btlog.activecount), '%')
@lldb_command('findelem')
def FindElem(cmd_args=None):
""" Zone corruption debugging: search the log and print out the stack traces for all log entries that
refer to the given zone element.
Usage: findelem <elem addr>
When the kernel panics due to a corrupted zone element, get the
element address and use this command. This will show you the stack traces of all logged zalloc and
zfree operations which tells you who touched the element in the recent past. This also makes
double-frees readily apparent.
"""
if not cmd_args:
print FindElem.__doc__
return
if int(kern.globals.log_records) == 0:
print "Zone logging not enabled. Add 'zlog=<zone name>' to boot-args."
return
if int(kern.globals.zlog_btlog) == 0:
print "Zone logging enabled, but zone has not been initialized yet."
return
target_element = unsigned(kern.GetValueFromAddress(cmd_args[0], 'void *'))
index = unsigned(kern.globals.zlog_btlog.head)
prev_op = -1
while index != 0xffffff:
findelem_record_offset = index * unsigned(kern.globals.zlog_btlog.btrecord_size)
findelem_record = kern.GetValueFromAddress(unsigned(kern.globals.zlog_btlog.btrecords) + findelem_record_offset, 'btlog_record_t *')
if unsigned(findelem_record.element) == target_element:
Zstack([index])
if int(findelem_record.operation) == prev_op:
print "{0: <s} DOUBLE OP! {1: <s}".format(('*' * 8), ('*' * 8))
prev_op = int(findelem_record.operation)
index = findelem_record.next
@lldb_command('btlog_find', "AS")
def BtlogFind(cmd_args=None, cmd_options={}):
""" Search the btlog_t for entries corresponding to the given element.
Use -A flag to print all entries.
Use -S flag to summarize the count of records
Usage: btlog_find <btlog_t> <element>
Usage: btlog_find <btlog_t> -A
Note: Backtraces will be in chronological order, with oldest entries aged out in FIFO order as needed.
"""
if not cmd_args:
raise ArgumentError("Need a btlog_t parameter")
btlog = kern.GetValueFromAddress(cmd_args[0], 'btlog_t *')
printall = False
summarize = False
summary_cache = {}
target_elem = 0xffffffff
if "-A" in cmd_options:
printall = True
else:
if not printall and len(cmd_args) < 2:
raise ArgumentError("<element> is missing in args. Need a search pointer.")
target_elem = unsigned(kern.GetValueFromAddress(cmd_args[1], 'void *'))
if "-S" in cmd_options:
summarize = True
index = unsigned(btlog.head)
progress = 0
record_size = unsigned(btlog.btrecord_size)
try:
while index != 0xffffff:
record_offset = index * record_size
record = kern.GetValueFromAddress(unsigned(btlog.btrecords) + record_offset, 'btlog_record_t *')
if printall or unsigned(record.element) == target_elem:
_s = '{0: <s} {2: <#0x} OP {1: <d} {3: <s}'.format(('-' * 8), record.operation, unsigned(record.element), ('-' * 8))
_s += GetBtlogBacktrace(btlog.btrecord_btdepth, record)
if summarize:
if _s not in summary_cache:
summary_cache[_s] = 1
else:
summary_cache[_s] += 1
else :
print _s
index = record.next
progress += 1
if (progress % 1000) == 0: print '{0: <d} entries searched!\n'.format(progress)
except ValueError, e:
pass
if summarize:
print "=================== SUMMARY =================="
for (k,v) in summary_cache.iteritems():
print "Count: %d %s \n " % (v, k)
return
@lldb_command('showzalloc')
def ShowZalloc(cmd_args=None):
""" Prints a zallocation from the zallocations array based off its index and prints the associated symbolicated backtrace.
Usage: showzalloc <index>
"""
if not cmd_args:
print ShowZalloc.__doc__
return
if unsigned(kern.globals.zallocations) == 0:
print "zallocations array not initialized!"
return
zallocation = kern.globals.zallocations[ArgumentStringToInt(cmd_args[0])]
print zallocation
ShowZTrace([str(int(zallocation.za_trace_index))])
@lldb_command('showztrace')
def ShowZTrace(cmd_args=None):
""" Prints the backtrace from the ztraces array at index
Usage: showztrace <trace index>
"""
if not cmd_args:
print ShowZTrace.__doc__
return
if unsigned(kern.globals.ztraces) == 0:
print "ztraces array not initialized!"
return
ztrace_addr = kern.globals.ztraces[ArgumentStringToInt(cmd_args[0])]
print ztrace_addr
ShowZstackTraceHelper(ztrace_addr.zt_stack, ztrace_addr.zt_depth)
@lldb_command('showztraceaddr')
def ShowZTraceAddr(cmd_args=None):
""" Prints the struct ztrace passed in.
Usage: showztraceaddr <trace address>
"""
if not cmd_args:
print ShowZTraceAddr.__doc__
return
ztrace_ptr = kern.GetValueFromAddress(cmd_args[0], 'struct ztrace *')
print dereference(ztrace_ptr)
ShowZstackTraceHelper(ztrace_ptr.zt_stack, ztrace_ptr.zt_depth)
@lldb_command('showzstacktrace')
def ShowZstackTrace(cmd_args=None):
""" Routine to print a stacktrace stored by OSBacktrace.
Usage: showzstacktrace <saved stacktrace> [size]
size is optional, defaults to 15.
"""
if not cmd_args:
print ShowZstackTrace.__doc__
return
void_ptr_type = gettype('void *')
void_double_ptr_type = void_ptr_type.GetPointerType()
trace = kern.GetValueFromAddress(cmd_args[0], void_double_ptr_type)
trace_size = 15
if len(cmd_args) >= 2:
trace_size = ArgumentStringToInt(cmd_args[1])
ShowZstackTraceHelper(trace, trace_size)
def ShowZstackTraceHelper(stack, depth):
""" Helper routine for printing a zstack.
params:
stack: void *[] - An array of pointers representing the Zstack
depth: int - The depth of the ztrace stack
returns:
None
"""
trace_current = 0
while trace_current < depth:
trace_addr = stack[trace_current]
symbol_arr = kern.SymbolicateFromAddress(unsigned(trace_addr))
if symbol_arr:
symbol_str = str(symbol_arr[0].addr)
else:
symbol_str = ''
print '{0: <#x} {1: <s}'.format(trace_addr, symbol_str)
trace_current += 1
@lldb_command('showtopztrace')
def ShowTopZtrace(cmd_args=None):
""" Shows the ztrace with the biggest size.
(According to top_ztrace, not by iterating through the hash table)
"""
top_trace = kern.globals.top_ztrace
print 'Index: {0: <d}'.format((unsigned(top_trace) - unsigned(kern.globals.ztraces)) / sizeof('struct ztrace'))
print dereference(top_trace)
ShowZstackTraceHelper(top_trace.zt_stack, top_trace.zt_depth)
@lldb_command('showzallocs')
def ShowZallocs(cmd_args=None):
""" Prints all allocations in the zallocations table
"""
if unsigned(kern.globals.zallocations) == 0:
print "zallocations array not initialized!"
return
print '{0: <5s} {1: <18s} {2: <5s} {3: <15s}'.format('INDEX','ADDRESS','TRACE','SIZE')
current_index = 0
max_zallocation = unsigned(kern.globals.zleak_alloc_buckets)
allocation_count = 0
while current_index < max_zallocation:
current_zalloc = kern.globals.zallocations[current_index]
if int(current_zalloc.za_element) != 0:
print '{0: <5d} {1: <#018x} {2: <5d} {3: <15d}'.format(current_index, current_zalloc.za_element, current_zalloc.za_trace_index, unsigned(current_zalloc.za_size))
allocation_count += 1
current_index += 1
print 'Total Allocations: {0: <d}'.format(allocation_count)
@lldb_command('showzallocsfortrace')
def ShowZallocsForTrace(cmd_args=None):
""" Prints all allocations pointing to the passed in trace's index into ztraces by looking through zallocations table
Usage: showzallocsfortrace <trace index>
"""
if not cmd_args:
print ShowZallocsForTrace.__doc__
return
print '{0: <5s} {1: <18s} {2: <15s}'.format('INDEX','ADDRESS','SIZE')
target_index = ArgumentStringToInt(cmd_args[0])
current_index = 0
max_zallocation = unsigned(kern.globals.zleak_alloc_buckets)
allocation_count = 0
while current_index < max_zallocation:
current_zalloc = kern.globals.zallocations[current_index]
if unsigned(current_zalloc.za_element) != 0 and (unsigned(current_zalloc.za_trace_index) == unsigned(target_index)):
print '{0: <5d} {1: <#018x} {2: <6d}'.format(current_index, current_zalloc.za_element, current_zalloc.za_size)
allocation_count += 1
current_index += 1
print 'Total Allocations: {0: <d}'.format(allocation_count)
@lldb_command('showztraces')
def ShowZTraces(cmd_args=None):
""" Prints all traces with size > 0
"""
ShowZTracesAbove([0])
@lldb_command('showztracesabove')
def ShowZTracesAbove(cmd_args=None):
""" Prints all traces with size greater than X
Usage: showztracesabove <size>
"""
if not cmd_args:
print ShowZTracesAbove.__doc__
return
print '{0: <5s} {1: <6s}'.format('INDEX','SIZE')
current_index = 0
ztrace_count = 0
max_ztrace = unsigned(kern.globals.zleak_trace_buckets)
while current_index < max_ztrace:
ztrace_current = kern.globals.ztraces[current_index]
if ztrace_current.zt_size > unsigned(cmd_args[0]):
print '{0: <5d} {1: <6d}'.format(current_index, int(ztrace_current.zt_size))
ztrace_count += 1
current_index += 1
print 'Total traces: {0: <d}'.format(ztrace_count)
@lldb_command('showztracehistogram')
def ShowZtraceHistogram(cmd_args=None):
""" Prints the histogram of the ztrace table
"""
print '{0: <5s} {1: <9s} {2: <10s}'.format('INDEX','HIT_COUNT','COLLISIONS')
current_index = 0
ztrace_count = 0
max_ztrace = unsigned(kern.globals.zleak_trace_buckets)
while current_index < max_ztrace:
ztrace_current = kern.globals.ztraces[current_index]
if ztrace_current.zt_hit_count != 0:
print '{0: <5d} {1: <9d} {2: <10d}'.format(current_index, ztrace_current.zt_hit_count, ztrace_current.zt_collisions)
ztrace_count += 1
current_index += 1
print 'Total traces: {0: <d}'.format(ztrace_count)
@lldb_command('showzallochistogram')
def ShowZallocHistogram(cmd_args=None):
""" Prints the histogram for the zalloc table
"""
print '{0: <5s} {1: <9s}'.format('INDEX','HIT_COUNT')
current_index = 0
zallocation_count = 0
max_ztrace = unsigned(kern.globals.zleak_alloc_buckets)
while current_index < max_ztrace:
zallocation_current = kern.globals.zallocations[current_index]
if zallocation_current.za_hit_count != 0:
print '{0: <5d} {1: <9d}'.format(current_index, zallocation_current.za_hit_count)
zallocation_count += 1
current_index += 1
print 'Total Allocations: {0: <d}'.format(zallocation_count)
@lldb_command('showzstats')
def ShowZstats(cmd_args=None):
""" Prints the zone leak detection stats
"""
print 'z_alloc_collisions: {0: <d}, z_trace_collisions: {1: <d}'.format(unsigned(kern.globals.z_alloc_collisions), unsigned(kern.globals.z_trace_collisions))
print 'z_alloc_overwrites: {0: <d}, z_trace_overwrites: {1: <d}'.format(unsigned(kern.globals.z_alloc_overwrites), unsigned(kern.globals.z_trace_overwrites))
print 'z_alloc_recorded: {0: <d}, z_trace_recorded: {1: <d}'.format(unsigned(kern.globals.z_alloc_recorded), unsigned(kern.globals.z_trace_recorded))
def GetBtlogBacktrace(depth, zstack_record):
""" Helper routine for getting a BT Log record backtrace stack.
params:
depth:int - The depth of the zstack record
zstack_record:btlog_record_t * - A BTLog record
returns:
str - string with backtrace in it.
"""
out_str = ''
frame = 0
if not zstack_record:
return "Zstack record none!"
depth_val = unsigned(depth)
while frame < depth_val:
frame_pc = zstack_record.bt[frame]
if not frame_pc or int(frame_pc) == 0:
break
symbol_arr = kern.SymbolicateFromAddress(frame_pc)
if symbol_arr:
symbol_str = str(symbol_arr[0].addr)
else:
symbol_str = ''
out_str += "{0: <#0x} <{1: <s}>\n".format(frame_pc, symbol_str)
frame += 1
return out_str
def ShowZStackRecord(zstack_record, zstack_index):
""" Helper routine for printing a single zstack record
params:
zstack_record:btlog_record_t * - A BTLog record
zstack_index:int - Index for the record in the BTLog table
returns:
None
"""
out_str = ('-' * 8)
if zstack_record.operation == 1:
out_str += "ALLOC "
else:
out_str += "FREE "
out_str += "{0: <#0x} : Index {1: <d} {2: <s}\n".format(zstack_record.element, zstack_index, ('-' * 8))
print out_str
print GetBtlogBacktrace(kern.globals.zlog_btlog.btrecord_btdepth, zstack_record)
@lldb_command('showioalloc')
def ShowIOAllocations(cmd_args=None):
""" Show some accounting of memory allocated by IOKit allocators. See ioalloccount man page for details.
Routine to display a summary of memory accounting allocated by IOKit allocators.
"""
print "Instance allocation = {0: <#0x} = {1: d}K".format(kern.globals.debug_ivars_size, (kern.globals.debug_ivars_size / 1024))
print "Container allocation = {0: <#0x} = {1: d}K".format(kern.globals.debug_container_malloc_size, (kern.globals.debug_container_malloc_size / 1024))
print "IOMalloc allocation = {0: <#0x} = {1: d}K".format(kern.globals.debug_iomalloc_size, (kern.globals.debug_iomalloc_size / 1024))
print "Container allocation = {0: <#0x} = {1: d}K".format(kern.globals.debug_iomallocpageable_size, (kern.globals.debug_iomallocpageable_size / 1024))
@lldb_command('showselectmem', "S:")
def ShowSelectMem(cmd_args=None, cmd_options={}):
""" Show memory cached by threads on calls to select.
usage: showselectmem [-v]
-v : print each thread's memory
(one line per thread with non-zero select memory)
-S {addr} : Find the thread whose thread-local select set
matches the given address
"""
verbose = False
opt_wqs = 0
if config['verbosity'] > vHUMAN:
verbose = True
if "-S" in cmd_options:
opt_wqs = unsigned(kern.GetValueFromAddress(cmd_options["-S"], 'uint64_t *'))
if opt_wqs == 0:
raise ArgumentError("Invalid waitq set address: {:s}".format(cmd_options["-S"]))
selmem = 0
if verbose:
print "{:18s} {:10s} {:s}".format('Task', 'Thread ID', 'Select Mem (bytes)')
for t in kern.tasks:
for th in IterateQueue(t.threads, 'thread *', 'task_threads'):
uth = Cast(th.uthread, 'uthread *');
wqs = 0
if hasattr(uth, 'uu_allocsize'): thmem = uth.uu_allocsize
wqs = uth.uu_wqset
elif hasattr(uth, 'uu_wqstate_sz'): thmem = uth.uu_wqstate_sz
wqs = uth.uu_wqset
else:
print "What kind of uthread is this?!"
return
if opt_wqs and opt_wqs == unsigned(wqs):
print "FOUND: {:#x} in thread: {:#x} ({:#x})".format(opt_wqs, unsigned(th), unsigned(th.thread_id))
if verbose and thmem > 0:
print "{:<#18x} {:<#10x} {:d}".format(unsigned(t), unsigned(th.thread_id), thmem)
selmem += thmem
print '-'*40
print "Total: {:d} bytes ({:d} kbytes)".format(selmem, selmem/1024)
@lldb_command('showtaskvme', "PS")
def ShowTaskVmeHelper(cmd_args=None, cmd_options={}):
""" Display a summary list of the specified vm_map's entries
Usage: showtaskvme <task address> (ex. showtaskvme 0x00ataskptr00 )
Use -S flag to show VM object shadow chains
Use -P flag to show pager info (mapped file, compressed pages, ...)
"""
show_pager_info = False
show_all_shadows = False
if "-P" in cmd_options:
show_pager_info = True
if "-S" in cmd_options:
show_all_shadows = True
task = kern.GetValueFromAddress(cmd_args[0], 'task *')
ShowTaskVMEntries(task, show_pager_info, show_all_shadows)
@lldb_command('showallvme', "PS")
def ShowAllVME(cmd_args=None, cmd_options={}):
""" Routine to print a summary listing of all the vm map entries
Go Through each task in system and show the vm memory regions
Use -S flag to show VM object shadow chains
Use -P flag to show pager info (mapped file, compressed pages, ...)
"""
show_pager_info = False
show_all_shadows = False
if "-P" in cmd_options:
show_pager_info = True
if "-S" in cmd_options:
show_all_shadows = True
for task in kern.tasks:
ShowTaskVMEntries(task, show_pager_info, show_all_shadows)
@lldb_command('showallvm')
def ShowAllVM(cmd_args=None):
""" Routine to print a summary listing of all the vm maps
"""
for task in kern.tasks:
print GetTaskSummary.header + ' ' + GetProcSummary.header
print GetTaskSummary(task) + ' ' + GetProcSummary(Cast(task.bsd_info, 'proc *'))
print GetVMMapSummary.header
print GetVMMapSummary(task.map)
@lldb_command("showtaskvm")
def ShowTaskVM(cmd_args=None):
""" Display info about the specified task's vm_map
syntax: (lldb) showtaskvm <task_ptr>
"""
if not cmd_args:
print ShowTaskVM.__doc__
return False
task = kern.GetValueFromAddress(cmd_args[0], 'task *')
if not task:
print "Unknown arguments."
return False
print GetTaskSummary.header + ' ' + GetProcSummary.header
print GetTaskSummary(task) + ' ' + GetProcSummary(Cast(task.bsd_info, 'proc *'))
print GetVMMapSummary.header
print GetVMMapSummary(task.map)
return True
@lldb_command('showallvmstats')
def ShowAllVMStats(cmd_args=None):
""" Print a summary of vm statistics in a table format
"""
page_size = kern.globals.page_size
vmstats = lambda:None
vmstats.wired_count = 0
vmstats.resident_count = 0
vmstats.resident_max = 0
vmstats.internal = 0
vmstats.external = 0
vmstats.reusable = 0
vmstats.compressed = 0
vmstats.compressed_peak = 0
vmstats.compressed_lifetime = 0
vmstats.error = ''
hdr_format = "{0: >10s} {1: <20s} {2: >6s} {3: >10s} {4: >10s} {5: >10s} {6: >10s} {7: >10s} {8: >10s} {9: >10s} {10: >10s} {11: >10s} {12: >10s} {13: >10s} {14:}"
print hdr_format.format('pid', 'command', '#ents', 'wired', 'vsize', 'rsize', 'NEW RSIZE', 'max rsize', 'internal', 'external', 'reusable', 'compressed', 'compressed', 'compressed', '')
print hdr_format.format('', '', '', '(pages)', '(pages)', '(pages)', '(pages)', '(pages)', '(pages)', '(pages)', '(pages)', '(current)', '(peak)', '(lifetime)', '')
entry_format = "{p.p_pid: >10d} {p.p_comm: <20s} {m.hdr.nentries: >6d} {s.wired_count: >10d} {vsize: >10d} {s.resident_count: >10d} {s.new_resident_count: >10d} {s.resident_max: >10d} {s.internal: >10d} {s.external: >10d} {s.reusable: >10d} {s.compressed: >10d} {s.compressed_peak: >10d} {s.compressed_lifetime: >10d} {s.error}"
for task in kern.tasks:
proc = Cast(task.bsd_info, 'proc *')
vmmap = Cast(task.map, '_vm_map *')
vmstats.error = ''
vmstats.wired_count = vmmap.pmap.stats.wired_count;
vmstats.resident_count = unsigned(vmmap.pmap.stats.resident_count);
vmstats.resident_max = vmmap.pmap.stats.resident_max;
vmstats.internal = unsigned(vmmap.pmap.stats.internal);
vmstats.external = unsigned(vmmap.pmap.stats.external);
vmstats.reusable = unsigned(vmmap.pmap.stats.reusable);
vmstats.compressed = unsigned(vmmap.pmap.stats.compressed);
vmstats.compressed_peak = unsigned(vmmap.pmap.stats.compressed_peak);
vmstats.compressed_lifetime = unsigned(vmmap.pmap.stats.compressed_lifetime);
vmstats.new_resident_count = vmstats.internal + vmstats.external
if vmstats.internal < 0:
vmstats.error += '*'
if vmstats.external < 0:
vmstats.error += '*'
if vmstats.reusable < 0:
vmstats.error += '*'
if vmstats.compressed < 0:
vmstats.error += '*'
if vmstats.compressed_peak < 0:
vmstats.error += '*'
if vmstats.compressed_lifetime < 0:
vmstats.error += '*'
if vmstats.new_resident_count +vmstats.reusable != vmstats.resident_count:
vmstats.error += '*'
print entry_format.format(p=proc, m=vmmap, vsize=(unsigned(vmmap.size) / page_size), t=task, s=vmstats)
def ShowTaskVMEntries(task, show_pager_info, show_all_shadows):
""" Routine to print out a summary listing of all the entries in a vm_map
params:
task - core.value : a object of type 'task *'
returns:
None
"""
print "vm_map entries for task " + hex(task)
print GetTaskSummary.header
print GetTaskSummary(task)
if not task.map:
print "Task {0: <#020x} has map = 0x0"
return None
print GetVMMapSummary.header
print GetVMMapSummary(task.map)
vme_list_head = task.map.hdr.links
vme_ptr_type = GetType('vm_map_entry *')
print GetVMEntrySummary.header
for vme in IterateQueue(vme_list_head, vme_ptr_type, "links"):
print GetVMEntrySummary(vme, show_pager_info, show_all_shadows)
return None
@lldb_command("showmap")
def ShowMap(cmd_args=None):
""" Routine to print out info about the specified vm_map
usage: showmap <vm_map>
"""
if cmd_args == None or len(cmd_args) < 1:
print "Invalid argument.", ShowMap.__doc__
return
map_val = kern.GetValueFromAddress(cmd_args[0], 'vm_map_t')
print GetVMMapSummary.header
print GetVMMapSummary(map_val)
@lldb_command("showmapvme")
def ShowMapVME(cmd_args=None):
"""Routine to print out info about the specified vm_map and its vm entries
usage: showmapvme <vm_map>
"""
if cmd_args == None or len(cmd_args) < 1:
print "Invalid argument.", ShowMap.__doc__
return
map_val = kern.GetValueFromAddress(cmd_args[0], 'vm_map_t')
print GetVMMapSummary.header
print GetVMMapSummary(map_val)
vme_list_head = map_val.hdr.links
vme_ptr_type = GetType('vm_map_entry *')
print GetVMEntrySummary.header
for vme in IterateQueue(vme_list_head, vme_ptr_type, "links"):
print GetVMEntrySummary(vme)
return None
@lldb_type_summary(['_vm_map *', 'vm_map_t'])
@header("{0: <20s} {1: <20s} {2: <20s} {3: >5s} {4: >5s} {5: <20s} {6: <20s}".format("vm_map", "pmap", "vm_size", "#ents", "rpage", "hint", "first_free"))
def GetVMMapSummary(vmmap):
""" Display interesting bits from vm_map struct """
out_string = ""
format_string = "{0: <#020x} {1: <#020x} {2: <#020x} {3: >5d} {4: >5d} {5: <#020x} {6: <#020x}"
vm_size = uint64_t(vmmap.size).value
resident_pages = 0
if vmmap.pmap != 0: resident_pages = int(vmmap.pmap.stats.resident_count)
out_string += format_string.format(vmmap, vmmap.pmap, vm_size, vmmap.hdr.nentries, resident_pages, vmmap.hint, vmmap.first_free)
return out_string
@lldb_type_summary(['vm_map_entry'])
@header("{0: <20s} {1: <20s} {2: <5s} {3: >7s} {4: <20s} {5: <20s}".format("entry", "start", "prot", "#page", "object", "offset"))
def GetVMEntrySummary(vme):
""" Display vm entry specific information. """
page_size = kern.globals.page_size
out_string = ""
format_string = "{0: <#020x} {1: <#20x} {2: <1x}{3: <1x}{4: <3s} {5: >7d} {6: <#020x} {7: <#020x}"
vme_protection = int(vme.protection)
vme_max_protection = int(vme.max_protection)
vme_extra_info_str ="SC-Ds"[int(vme.inheritance)]
if int(vme.is_sub_map) != 0 :
vme_extra_info_str +="s"
elif int(vme.needs_copy) != 0 :
vme_extra_info_str +="n"
num_pages = (unsigned(vme.links.end) - unsigned(vme.links.start)) / page_size
out_string += format_string.format(vme, vme.links.start, vme_protection, vme_max_protection, vme_extra_info_str, num_pages, vme.vme_object.vmo_object, vme.vme_offset)
return out_string
@lldb_command('showmapwired')
def ShowMapWired(cmd_args=None):
""" Routine to print out a summary listing of all the entries with wired pages in a vm_map
"""
if cmd_args == None or len(cmd_args) < 1:
print "Invalid argument", ShowMapWired.__doc__
return
map_val = kern.GetValueFromAddress(cmd_args[0], 'vm_map_t')
@lldb_type_summary(['kmod_info_t *'])
@header("{0: <20s} {1: <20s} {2: <20s} {3: >3s} {4: >5s} {5: >20s} {6: <30s}".format('kmod_info', 'address', 'size', 'id', 'refs', 'version', 'name'))
def GetKextSummary(kmod):
""" returns a string representation of kext information
"""
out_string = ""
format_string = "{0: <#020x} {1: <#020x} {2: <#020x} {3: >3d} {4: >5d} {5: >20s} {6: <30s}"
out_string += format_string.format(kmod, kmod.address, kmod.size, kmod.id, kmod.reference_count, kmod.version, kmod.name)
return out_string
@lldb_type_summary(['uuid_t'])
@header("")
def GetUUIDSummary(uuid):
""" returns a string representation like CA50DA4C-CA10-3246-B8DC-93542489AA26
"""
arr = Cast(addressof(uuid), 'uint8_t *')
data = []
for i in range(16):
data.append(int(arr[i]))
return "{a[0]:02X}{a[1]:02X}{a[2]:02X}{a[3]:02X}-{a[4]:02X}{a[5]:02X}-{a[6]:02X}{a[7]:02X}-{a[8]:02X}{a[9]:02X}-{a[10]:02X}{a[11]:02X}{a[12]:02X}{a[13]:02X}{a[14]:02X}{a[15]:02X}".format(a=data)
@lldb_command('showallkmods')
def ShowAllKexts(cmd_args=None):
"""Display a summary listing of all loaded kexts (alias: showallkmods)
"""
kmod_val = kern.globals.kmod
print "{: <36s} ".format("UUID") + GetKextSummary.header
kextuuidinfo = GetKextLoadInformation()
for kval in IterateLinkedList(kmod_val, 'next'):
uuid = "........-....-....-....-............"
kaddr = unsigned(kval.address)
for l in kextuuidinfo :
if kaddr == int(l[1],16):
uuid = l[0]
break
print uuid + " " + GetKextSummary(kval)
def GetKextLoadInformation(addr=0):
""" Extract the kext uuid and load address information from the kernel data structure.
params:
addr - int - optional integer that is the address to search for.
returns:
[] - array with each entry of format ( 'UUID', 'Hex Load Address')
"""
baseaddr = unsigned(kern.globals.gLoadedKextSummaries) + 0x10
summaries_begin = kern.GetValueFromAddress(baseaddr, 'OSKextLoadedKextSummary *')
total_summaries = int(kern.globals.gLoadedKextSummaries.numSummaries)
kext_version = int(kern.globals.gLoadedKextSummaries.version)
entry_size = 64 + 16 + 8 + 8 + 8 + 4 + 4
if kext_version >= 2 :
entry_size = int(kern.globals.gLoadedKextSummaries.entry_size)
retval = []
for i in range(total_summaries):
tmpaddress = unsigned(summaries_begin) + (i * entry_size)
current_kext = kern.GetValueFromAddress(tmpaddress, 'OSKextLoadedKextSummary *')
if addr != 0 :
if addr == unsigned(current_kext.address):
retval.append((GetUUIDSummary(current_kext.uuid) , hex(current_kext.address), str(current_kext.name) ))
else:
retval.append((GetUUIDSummary(current_kext.uuid) , hex(current_kext.address), str(current_kext.name) ))
return retval
lldb_alias('showallkexts', 'showallkmods')
def GetOSKextVersion(version_num):
""" returns a string of format 1.2.3x from the version_num
params: version_num - int
return: str
"""
if version_num == -1 :
return "invalid"
(MAJ_MULT, MIN_MULT, REV_MULT,STAGE_MULT) = (100000000, 1000000, 10000, 1000)
version = version_num
vers_major = version / MAJ_MULT
version = version - (vers_major * MAJ_MULT)
vers_minor = version / MIN_MULT
version = version - (vers_minor * MIN_MULT)
vers_revision = version / REV_MULT
version = version - (vers_revision * REV_MULT)
vers_stage = version / STAGE_MULT
version = version - (vers_stage * STAGE_MULT)
vers_stage_level = version
out_str = "%d.%d" % (vers_major, vers_minor)
if vers_revision > 0: out_str += ".%d" % vers_revision
if vers_stage == 1 : out_str += "d%d" % vers_stage_level
if vers_stage == 3 : out_str += "a%d" % vers_stage_level
if vers_stage == 5 : out_str += "b%d" % vers_stage_level
if vers_stage == 6 : out_str += "fc%d" % vers_stage_level
return out_str
@lldb_command('showallknownkmods')
def ShowAllKnownKexts(cmd_args=None):
""" Display a summary listing of all kexts known in the system.
This is particularly useful to find if some kext was unloaded before this crash'ed state.
"""
kext_count = int(kern.globals.sKextsByID.count)
index = 0
kext_dictionary = kern.globals.sKextsByID.dictionary
print "%d kexts in sKextsByID:" % kext_count
print "{0: <20s} {1: <20s} {2: >5s} {3: >20s} {4: <30s}".format('OSKEXT *', 'load_addr', 'id', 'version', 'name')
format_string = "{0: <#020x} {1: <20s} {2: >5s} {3: >20s} {4: <30s}"
while index < kext_count:
kext_dict = GetObjectAtIndexFromArray(kext_dictionary, index)
kext_name = str(kext_dict.key.string)
osk = Cast(kext_dict.value, 'OSKext *')
if int(osk.flags.loaded) :
load_addr = "{0: <#020x}".format(osk.kmod_info)
id = "{0: >5d}".format(osk.loadTag)
else:
load_addr = "------"
id = "--"
version_num = unsigned(osk.version)
version = GetOSKextVersion(version_num)
print format_string.format(osk, load_addr, id, version, kext_name)
index += 1
return
@lldb_command('showkmodaddr')
def ShowKmodAddr(cmd_args=[]):
""" Given an address, print the offset and name for the kmod containing it
Syntax: (lldb) showkmodaddr <addr>
"""
if len(cmd_args) < 1:
raise ArgumentError("Insufficient arguments")
addr = ArgumentStringToInt(cmd_args[0])
kmod_val = kern.globals.kmod
for kval in IterateLinkedList(kmod_val, 'next'):
if addr >= unsigned(kval.address) and addr <= (unsigned(kval.address) + unsigned(kval.size)):
print GetKextSummary.header
print GetKextSummary(kval) + " offset = {0: #0x}".format((addr - unsigned(kval.address)))
return True
return False
@lldb_command('addkext','AF:N:')
def AddKextSyms(cmd_args=[], cmd_options={}):
""" Add kext symbols into lldb.
This command finds symbols for a uuid and load the required executable
Usage:
addkext <uuid> : Load one kext based on uuid. eg. (lldb)addkext 4DD2344C0-4A81-3EAB-BDCF-FEAFED9EB73E
addkext -F <abs/path/to/executable> <load_address> : Load kext executable at specified load address
addkext -N <name> : Load one kext that matches the name provided. eg. (lldb) addkext -N corecrypto
addkext -N <name> -A: Load all kext that matches the name provided. eg. to load all kext with Apple in name do (lldb) addkext -N Apple -A
addkext all : Will load all the kext symbols - SLOW
"""
if "-F" in cmd_options:
exec_path = cmd_options["-F"]
exec_full_path = ResolveFSPath(exec_path)
if not os.path.exists(exec_full_path):
raise ArgumentError("Unable to resolve {:s}".format(exec_path))
if not os.path.isfile(exec_full_path):
raise ArgumentError("Path is {:s} not a filepath. \nPlease check that path points to executable.\
\nFor ex. path/to/Symbols/IOUSBFamily.kext/Contents/PlugIns/AppleUSBHub.kext/Contents/MacOS/AppleUSBHub.\
\nNote: LLDB does not support adding kext based on directory paths like gdb used to.".format(exec_path))
if not os.access(exec_full_path, os.X_OK):
raise ArgumentError("Path is {:s} not an executable file".format(exec_path))
slide_value = None
if cmd_args:
slide_value = cmd_args[0]
debuglog("loading slide value from user input %s" % cmd_args[0])
filespec = lldb.SBFileSpec(exec_full_path, False)
print "target modules add %s" % exec_full_path
print lldb_run_command("target modules add %s" % exec_full_path)
loaded_module = LazyTarget.GetTarget().FindModule(filespec)
if loaded_module.IsValid():
uuid_str = loaded_module.GetUUIDString()
debuglog("added module %s with uuid %s" % (exec_full_path, uuid_str))
if slide_value is None:
all_kexts_info = GetKextLoadInformation()
for k in all_kexts_info:
debuglog(k[0])
if k[0].lower() == uuid_str.lower():
slide_value = k[1]
debuglog("found the slide %s for uuid %s" % (k[1], k[0]))
if slide_value is None:
raise ArgumentError("Unable to find load address for module described at %s " % exec_full_path)
load_cmd = "target modules load --file %s --slide %s" % (exec_full_path, str(slide_value))
print load_cmd
print lldb_run_command(load_cmd)
kern.symbolicator = None
return True
all_kexts_info = GetKextLoadInformation()
if "-N" in cmd_options:
kext_name = cmd_options["-N"]
kext_name_matches = GetLongestMatchOption(kext_name, [str(x[2]) for x in all_kexts_info], True)
if len(kext_name_matches) != 1 and "-A" not in cmd_options:
print "Ambiguous match for name: {:s}".format(kext_name)
if len(kext_name_matches) > 0:
print "Options are:\n\t" + "\n\t".join(kext_name_matches)
return
debuglog("matched the kext to name %s and uuid %s" % (kext_name_matches[0], kext_name))
for cur_knm in kext_name_matches:
for x in all_kexts_info:
if cur_knm == x[2]:
cur_uuid = x[0].lower()
print "Fetching dSYM for {:s}".format(cur_uuid)
info = dsymForUUID(cur_uuid)
if info and 'DBGSymbolRichExecutable' in info:
print "Adding dSYM ({0:s}) for {1:s}".format(cur_uuid, info['DBGSymbolRichExecutable'])
addDSYM(cur_uuid, info)
loadDSYM(cur_uuid, int(x[1],16))
else:
print "Failed to get symbol info for {:s}".format(cur_uuid)
break
kern.symbolicator = None
return
if len(cmd_args) < 1:
raise ArgumentError("No arguments specified.")
uuid = cmd_args[0].lower()
load_all_kexts = False
if uuid == "all":
load_all_kexts = True
if not load_all_kexts and len(uuid_regex.findall(uuid)) == 0:
raise ArgumentError("Unknown argument {:s}".format(uuid))
for k_info in all_kexts_info:
cur_uuid = k_info[0].lower()
if load_all_kexts or (uuid == cur_uuid):
print "Fetching dSYM for %s" % cur_uuid
info = dsymForUUID(cur_uuid)
if info and 'DBGSymbolRichExecutable' in info:
print "Adding dSYM (%s) for %s" % (cur_uuid, info['DBGSymbolRichExecutable'])
addDSYM(cur_uuid, info)
loadDSYM(cur_uuid, int(k_info[1],16))
else:
print "Failed to get symbol info for %s" % cur_uuid
kern.symbolicator = None
return True
lldb_alias('showkmod', 'showkmodaddr')
lldb_alias('showkext', 'showkmodaddr')
lldb_alias('showkextaddr', 'showkmodaddr')
@lldb_type_summary(['mount *'])
@header("{0: <20s} {1: <20s} {2: <20s} {3: <12s} {4: <12s} {5: <12s} {6: >6s} {7: <30s} {8: <35s} {9: <30s}".format('volume(mp)', 'mnt_data', 'mnt_devvp', 'flag', 'kern_flag', 'lflag', 'type', 'mnton', 'mntfrom', 'iosched supported'))
def GetMountSummary(mount):
""" Display a summary of mount on the system
"""
out_string = ("{mnt: <#020x} {mnt.mnt_data: <#020x} {mnt.mnt_devvp: <#020x} {mnt.mnt_flag: <#012x} " +
"{mnt.mnt_kern_flag: <#012x} {mnt.mnt_lflag: <#012x} {vfs.f_fstypename: >6s} " +
"{vfs.f_mntonname: <30s} {vfs.f_mntfromname: <35s} {iomode: <30s}").format(mnt=mount, vfs=mount.mnt_vfsstat, iomode=('Yes' if (mount.mnt_ioflags & 0x4) else 'No'))
return out_string
@lldb_command('showallmounts')
def ShowAllMounts(cmd_args=None):
""" Print all mount points
"""
mntlist = kern.globals.mountlist
print GetMountSummary.header
for mnt in IterateTAILQ_HEAD(mntlist, 'mnt_list'):
print GetMountSummary(mnt)
return
lldb_alias('ShowAllVols', 'showallmounts')
@lldb_command('systemlog')
def ShowSystemLog(cmd_args=None):
""" Display the kernel's printf ring buffer """
msgbufp = kern.globals.msgbufp
msg_size = int(msgbufp.msg_size)
msg_bufx = int(msgbufp.msg_bufx)
msg_bufr = int(msgbufp.msg_bufr)
msg_bufc = msgbufp.msg_bufc
msg_bufc_data = msg_bufc.GetSBValue().GetPointeeData(0, msg_size)
line = ''
err = lldb.SBError()
for i in range(msg_bufx, msg_size) + range(0, msg_bufx) :
err.Clear()
cbyte = msg_bufc_data.GetUnsignedInt8(err, i)
if not err.Success() :
raise ValueError("Failed to read character at offset " + str(i) + ": " + err.GetCString())
c = chr(cbyte)
if c == '\0' :
continue
elif c == '\n' :
print line
line = ''
else :
line += c
if len(line) > 0 :
print line
return
@static_var('output','')
def _GetVnodePathName(vnode, vnodename):
""" Internal function to get vnode path string from vnode structure.
params:
vnode - core.value
vnodename - str
returns Nothing. The output will be stored in the static variable.
"""
if not vnode:
return
if int(vnode.v_flag) & 0x1 and int(hex(vnode.v_mount), 16) !=0:
if int(vnode.v_mount.mnt_vnodecovered):
_GetVnodePathName(vnode.v_mount.mnt_vnodecovered, str(vnode.v_mount.mnt_vnodecovered.v_name) )
else:
_GetVnodePathName(vnode.v_parent, str(vnode.v_parent.v_name))
_GetVnodePathName.output += "/%s" % vnodename
def GetVnodePath(vnode):
""" Get string representation of the vnode
params: vnodeval - value representing vnode * in the kernel
return: str - of format /path/to/something
"""
out_str = ''
if vnode:
if (int(vnode.v_flag) & 0x000001) and int(hex(vnode.v_mount), 16) != 0 and (int(vnode.v_mount.mnt_flag) & 0x00004000) :
out_str += "/"
else:
_GetVnodePathName.output = ''
if abs(vnode.v_name) != 0:
_GetVnodePathName(vnode, str(vnode.v_name))
out_str += _GetVnodePathName.output
else:
out_str += 'v_name = NULL'
_GetVnodePathName.output = ''
return out_str
@lldb_command('showvnodepath')
def ShowVnodePath(cmd_args=None):
""" Prints the path for a vnode
usage: showvnodepath <vnode>
"""
if cmd_args != None and len(cmd_args) > 0 :
vnode_val = kern.GetValueFromAddress(cmd_args[0], 'vnode *')
if vnode_val:
print GetVnodePath(vnode_val)
return
def GetVnodeDevInfo(vnode):
""" Internal function to get information from the device type vnodes
params: vnode - value representing struct vnode *
return: str - formatted output information for block and char vnode types passed as param
"""
vnodedev_output = ""
vblk_type = GetEnumValue('vtype::VBLK')
vchr_type = GetEnumValue('vtype::VCHR')
if (vnode.v_type == vblk_type) or (vnode.v_type == vchr_type):
devnode = Cast(vnode.v_data, 'devnode_t *')
devnode_dev = devnode.dn_typeinfo.dev
devnode_major = (devnode_dev >> 24) & 0xff
devnode_minor = devnode_dev & 0x00ffffff
vnodedev_output += "Device Info:\n\t vnode:\t\t{:#x}".format(vnode)
vnodedev_output += "\n\t type:\t\t"
if (vnode.v_type == vblk_type):
vnodedev_output += "VBLK"
if (vnode.v_type == vchr_type):
vnodedev_output += "VCHR"
vnodedev_output += "\n\t name:\t\t{:<s}".format(vnode.v_name)
vnodedev_output += "\n\t major, minor:\t{:d},{:d}".format(devnode_major, devnode_minor)
vnodedev_output += "\n\t mode\t\t0{:o}".format(unsigned(devnode.dn_mode))
vnodedev_output += "\n\t owner (u,g):\t{:d} {:d}".format(devnode.dn_uid, devnode.dn_gid)
vnodedev_output += "\nDevice Specific Information:\t"
if (vnode.v_type == vblk_type):
vnodedev_output += "Sorry, I do not know how to decode block devices yet!"
vnodedev_output += "\nMaybe you can write me!"
if (vnode.v_type == vchr_type):
if (devnode_major > 42) or (devnode_major < 0):
vnodedev_output += "Invalid major #\n"
elif (devnode_major == 0):
vnodedev_output += "Console mux device\n"
elif (devnode_major == 2):
vnodedev_output += "Current tty alias\n"
elif (devnode_major == 3):
vnodedev_output += "NULL device\n"
elif (devnode_major == 4):
vnodedev_output += "Old pty slave\n"
elif (devnode_major == 5):
vnodedev_output += "Old pty master\n"
elif (devnode_major == 6):
vnodedev_output += "Kernel log\n"
elif (devnode_major == 12):
vnodedev_output += "Memory devices\n"
elif unsigned(kern.globals.cdevsw[devnode_major].d_open) == unsigned(kern.GetLoadAddressForSymbol('ptmx_open')):
vnodedev_output += "Cloning pty master not done\n"
elif unsigned(kern.globals.cdevsw[devnode_major].d_open) == unsigned(kern.GetLoadAddressForSymbol('ptsd_open')):
vnodedev_output += "Cloning pty slave not done\n"
else:
vnodedev_output += "RESERVED SLOT\n"
else:
vnodedev_output += "{:#x} is not a device".format(vnode)
return vnodedev_output
@lldb_command('showvnodedev')
def ShowVnodeDev(cmd_args=None):
""" Routine to display details of all vnodes of block and character device types
Usage: showvnodedev <address of vnode>
"""
if not cmd_args:
print "No arguments passed"
print ShowVnodeDev.__doc__
return False
vnode_val = kern.GetValueFromAddress(cmd_args[0], 'vnode *')
if not vnode_val:
print "unknown arguments:", str(cmd_args)
return False
print GetVnodeDevInfo(vnode_val)
def GetVnodeLock(lockf):
""" Internal function to get information from the given advisory lock
params: lockf - value representing v_lockf member in struct vnode *
return: str - formatted output information for the advisory lock
"""
vnode_lock_output = ''
lockf_flags = lockf.lf_flags
lockf_type = lockf.lf_type
if lockf_flags & 0x20:
vnode_lock_output += ("{: <8s}").format('flock')
if lockf_flags & 0x40:
vnode_lock_output += ("{: <8s}").format('posix')
if lockf_flags & 0x80:
vnode_lock_output += ("{: <8s}").format('prov')
if lockf_flags & 0x10:
vnode_lock_output += ("{: <4s}").format('W')
if lockf_flags & 0x400:
vnode_lock_output += ("{: <8s}").format('ofd')
else:
vnode_lock_output += ("{: <4s}").format('.')
if lockf_flags & 0x40:
lockf_proc = Cast(lockf.lf_id, 'proc *')
vnode_lock_output += ("PID {: <18d}").format(lockf_proc.p_pid)
else:
vnode_lock_output += ("ID {: <#019x}").format(int(lockf.lf_id))
if lockf_type == 1:
vnode_lock_output += ("{: <12s}").format('shared')
else:
if lockf_type == 3:
vnode_lock_output += ("{: <12s}").format('exclusive')
else:
if lockf_type == 2:
vnode_lock_output += ("{: <12s}").format('unlock')
else:
vnode_lock_output += ("{: <12s}").format('unknown')
vnode_lock_output += ("{: #018x} ..").format(lockf.lf_start)
vnode_lock_output += ("{: #018x}\n").format(lockf.lf_end)
return vnode_lock_output
@header("{0: <3s} {1: <7s} {2: <3s} {3: <21s} {4: <11s} {5: ^19s} {6: ^17s}".format('*', 'type', 'W', 'held by', 'lock type', 'start', 'end'))
def GetVnodeLocksSummary(vnode):
""" Internal function to get summary of advisory locks for the given vnode
params: vnode - value representing the vnode object
return: str - formatted output information for the summary of advisory locks
"""
out_str = ''
if vnode:
lockf_list = vnode.v_lockf
for lockf_itr in IterateLinkedList(lockf_list, 'lf_next'):
out_str += ("{: <4s}").format('H')
out_str += GetVnodeLock(lockf_itr)
lockf_blocker = lockf_itr.lf_blkhd.tqh_first
while lockf_blocker:
out_str += ("{: <4s}").format('>')
out_str += GetVnodeLock(lockf_blocker)
lockf_blocker = lockf_blocker.lf_block.tqe_next
return out_str
@lldb_command('showvnodelocks')
def ShowVnodeLocks(cmd_args=None):
""" Routine to display list of advisory record locks for the given vnode address
Usage: showvnodelocks <address of vnode>
"""
if not cmd_args:
print "No arguments passed"
print ShowVnodeLocks.__doc__
return False
vnode_val = kern.GetValueFromAddress(cmd_args[0], 'vnode *')
if not vnode_val:
print "unknown arguments:", str(cmd_args)
return False
print GetVnodeLocksSummary.header
print GetVnodeLocksSummary(vnode_val)
@lldb_command('showproclocks')
def ShowProcLocks(cmd_args=None):
""" Routine to display list of advisory record locks for the given process
Usage: showproclocks <address of proc>
"""
if not cmd_args:
print "No arguments passed"
print ShowProcLocks.__doc__
return False
proc = kern.GetValueFromAddress(cmd_args[0], 'proc *')
if not proc:
print "unknown arguments:", str(cmd_args)
return False
out_str = ''
proc_filedesc = proc.p_fd
fd_lastfile = proc_filedesc.fd_lastfile
fd_ofiles = proc_filedesc.fd_ofiles
count = 0
seen = 0
while count <= fd_lastfile:
if fd_ofiles[count]:
fglob = fd_ofiles[count].f_fglob
fo_type = fglob.fg_ops.fo_type
if fo_type == 1:
fg_data = fglob.fg_data
fg_vnode = Cast(fg_data, 'vnode *')
name = fg_vnode.v_name
lockf_itr = fg_vnode.v_lockf
if lockf_itr:
if not seen:
print GetVnodeLocksSummary.header
seen = seen + 1
out_str += ("\n( fd {:d}, name ").format(count)
if not name:
out_str += "(null) )\n"
else:
out_str += "{:s} )\n".format(name)
print out_str
print GetVnodeLocksSummary(fg_vnode)
count = count + 1
print "\n{0: d} total locks for {1: #018x}".format(seen, proc)
@lldb_type_summary(['vnode_t', 'vnode *'])
@header("{0: <20s} {1: >8s} {2: >8s} {3: <20s} {4: <6s} {5: <20s} {6: <6s} {7: <6s} {8: <35s}".format('vnode', 'usecount', 'iocount', 'v_data', 'vtype', 'parent', 'mapped', 'cs_version', 'name'))
def GetVnodeSummary(vnode):
""" Get a summary of important information out of vnode
"""
out_str = ''
format_string = "{0: <#020x} {1: >8d} {2: >8d} {3: <#020x} {4: <6s} {5: <#020x} {6: <6s} {7: <6s} {8: <35s}"
usecount = int(vnode.v_usecount)
iocount = int(vnode.v_iocount)
v_data_ptr = int(hex(vnode.v_data), 16)
vtype = int(vnode.v_type)
vtype_str = "%d" % vtype
vnode_types = ['VNON', 'VREG', 'VDIR', 'VBLK', 'VCHR', 'VLNK', 'VSOCK', 'VFIFO', 'VBAD', 'VSTR', 'VCPLX'] if vtype >= 0 and vtype < len(vnode_types):
vtype_str = vnode_types[vtype]
parent_ptr = int(hex(vnode.v_parent), 16)
name_ptr = int(hex(vnode.v_name), 16)
name =""
if name_ptr != 0:
name = str(vnode.v_name)
elif int(vnode.v_tag) == 16 :
cnode = Cast(vnode.v_data, 'cnode *')
name = "hfs: %s" % str( Cast(cnode.c_desc.cd_nameptr, 'char *'))
mapped = '-'
csblob_version = '-'
if (vtype == 1) and (vnode.v_un.vu_ubcinfo != 0):
csblob_version = '{: <6d}'.format(vnode.v_un.vu_ubcinfo.cs_add_gen)
if (vnode.v_un.vu_ubcinfo.ui_flags & 0x8) != 0:
mapped = '1'
else:
mapped = '0'
out_str += format_string.format(vnode, usecount, iocount, v_data_ptr, vtype_str, parent_ptr, mapped, csblob_version, name)
return out_str
@lldb_command('showallvnodes')
def ShowAllVnodes(cmd_args=None):
""" Display info about all vnodes
"""
mntlist = kern.globals.mountlist
print GetVnodeSummary.header
for mntval in IterateTAILQ_HEAD(mntlist, 'mnt_list'):
for vnodeval in IterateTAILQ_HEAD(mntval.mnt_vnodelist, 'v_mntvnodes'):
print GetVnodeSummary(vnodeval)
return
@lldb_command('showvnode')
def ShowVnode(cmd_args=None):
""" Display info about one vnode
usage: showvnode <vnode>
"""
if cmd_args == None or len(cmd_args) < 1:
print "Please provide valid vnode argument. Type help showvnode for help."
return
vnodeval = kern.GetValueFromAddress(cmd_args[0],'vnode *')
print GetVnodeSummary.header
print GetVnodeSummary(vnodeval)
@lldb_command('showvolvnodes')
def ShowVolVnodes(cmd_args=None):
""" Display info about all vnodes of a given mount_t
"""
if cmd_args == None or len(cmd_args) < 1:
print "Please provide a valide mount_t argument. Try 'help showvolvnodes' for help"
return
mntval = kern.GetValueFromAddress(cmd_args[0], 'mount_t')
print GetVnodeSummary.header
for vnodeval in IterateTAILQ_HEAD(mntval.mnt_vnodelist, 'v_mntvnodes'):
print GetVnodeSummary(vnodeval)
return
@lldb_command('showvolbusyvnodes')
def ShowVolBusyVnodes(cmd_args=None):
""" Display info about busy (iocount!=0) vnodes of a given mount_t
"""
if cmd_args == None or len(cmd_args) < 1:
print "Please provide a valide mount_t argument. Try 'help showvolbusyvnodes' for help"
return
mntval = kern.GetValueFromAddress(cmd_args[0], 'mount_t')
print GetVnodeSummary.header
for vnodeval in IterateTAILQ_HEAD(mntval.mnt_vnodelist, 'v_mntvnodes'):
if int(vnodeval.v_iocount) != 0:
print GetVnodeSummary(vnodeval)
@lldb_command('showallbusyvnodes')
def ShowAllBusyVnodes(cmd_args=None):
""" Display info about all busy (iocount!=0) vnodes
"""
mntlistval = kern.globals.mountlist
for mntval in IterateTAILQ_HEAD(mntlistval, 'mnt_list'):
ShowVolBusyVnodes([hex(mntval)])
@lldb_command('print_vnode')
def PrintVnode(cmd_args=None):
""" Prints out the fields of a vnode struct
Usage: print_vnode <vnode>
"""
if not cmd_args:
print "Please provide valid vnode argument. Type help print_vnode for help."
return
ShowVnode(cmd_args)
@lldb_command('showworkqvnodes')
def ShowWorkqVnodes(cmd_args=None):
""" Print the vnode worker list
Usage: showworkqvnodes <struct mount *>
"""
if not cmd_args:
print "Please provide valid mount argument. Type help showworkqvnodes for help."
return
mp = kern.GetValueFromAddress(cmd_args[0], 'mount *')
vp = Cast(mp.mnt_workerqueue.tqh_first, 'vnode *')
print GetVnodeSummary.header
while int(vp) != 0:
print GetVnodeSummary(vp)
vp = vp.v_mntvnodes.tqe_next
@lldb_command('shownewvnodes')
def ShowNewVnodes(cmd_args=None):
""" Print the new vnode list
Usage: shownewvnodes <struct mount *>
"""
if not cmd_args:
print "Please provide valid mount argument. Type help shownewvnodes for help."
return
mp = kern.GetValueFromAddress(cmd_args[0], 'mount *')
vp = Cast(mp.mnt_newvnodes.tqh_first, 'vnode *')
print GetVnodeSummary.header
while int(vp) != 0:
print GetVnodeSummary(vp)
vp = vp.v_mntvnodes.tqe_next
@lldb_command('showprocvnodes')
def ShowProcVnodes(cmd_args=None):
""" Routine to print out all the open fds which are vnodes in a process
Usage: showprocvnodes <proc *>
"""
if not cmd_args:
print "Please provide valid proc argument. Type help showprocvnodes for help."
return
procptr = kern.GetValueFromAddress(cmd_args[0], 'proc *')
fdptr = Cast(procptr.p_fd, 'filedesc *')
if int(fdptr.fd_cdir) != 0:
print '{0: <25s}\n{1: <s}\n{2: <s}'.format('Current Working Directory:', GetVnodeSummary.header, GetVnodeSummary(fdptr.fd_cdir))
if int(fdptr.fd_rdir) != 0:
print '{0: <25s}\n{1: <s}\n{2: <s}'.format('Current Root Directory:', GetVnodeSummary.header, GetVnodeSummary(fdptr.fd_rdir))
count = 0
print '\n' + '{0: <5s} {1: <7s}'.format('fd', 'flags') + GetVnodeSummary.header
fpptr = Cast(fdptr.fd_ofiles, 'fileproc *')
while count < fdptr.fd_nfiles:
fpp = dereference(fpptr)
fproc = Cast(fpp, 'fileproc *')
if int(fproc) != 0:
fglob = dereference(fproc).f_fglob
flags = ""
if (int(fglob) != 0) and (int(fglob.fg_ops.fo_type) == 1):
if (fdptr.fd_ofileflags[count] & 1): flags += 'E'
if (fdptr.fd_ofileflags[count] & 2): flags += 'F'
if (fdptr.fd_ofileflags[count] & 4): flags += 'R'
if (fdptr.fd_ofileflags[count] & 8): flags += 'C'
print '{0: <5d} {1: <7s}'.format(count, flags) + GetVnodeSummary(Cast(fglob.fg_data, 'vnode *'))
count += 1
fpptr = kern.GetValueFromAddress(int(fpptr) + kern.ptrsize,'fileproc *')
@lldb_command('showallprocvnodes')
def ShowAllProcVnodes(cmd_args=None):
""" Routine to print out all the open fds which are vnodes
"""
procptr = Cast(kern.globals.allproc.lh_first, 'proc *')
while procptr and int(procptr) != 0:
print '{:<s}'.format("=" * 106)
print GetProcInfo(procptr)
ShowProcVnodes([int(procptr)])
procptr = procptr.p_list.le_next
@xnudebug_test('test_vnode')
def TestShowAllVnodes(kernel_target, config, lldb_obj, isConnected ):
""" Test the functionality of vnode related commands
returns
- False on failure
- True on success
"""
if not isConnected:
print "Target is not connected. Cannot test memstats"
return False
res = lldb.SBCommandReturnObject()
lldb_obj.debugger.GetCommandInterpreter().HandleCommand("showallvnodes", res)
result = res.GetOutput()
if len(result.split("\n")) > 2 and result.find('VREG') != -1 and len(result.splitlines()[2].split()) > 5:
return True
else:
return False
@lldb_type_summary(['_lck_grp_ *'])
def GetMutexEntry(mtxg):
""" Summarize a mutex group entry with important information.
params:
mtxg: value - obj representing a mutex group in kernel
returns:
out_string - summary of the mutex group
"""
out_string = ""
if kern.ptrsize == 8:
format_string = '{0:#018x} {1:10d} {2:10d} {3:10d} {4:10d} {5: <30s} '
else:
format_string = '{0:#010x} {1:10d} {2:10d} {3:10d} {4:10d} {5: <30s} '
if mtxg.lck_grp_mtxcnt:
out_string += format_string.format(mtxg, mtxg.lck_grp_mtxcnt,mtxg.lck_grp_stat.lck_grp_mtx_stat.lck_grp_mtx_util_cnt,
mtxg.lck_grp_stat.lck_grp_mtx_stat.lck_grp_mtx_miss_cnt,
mtxg.lck_grp_stat.lck_grp_mtx_stat.lck_grp_mtx_wait_cnt, mtxg.lck_grp_name)
return out_string
@lldb_command('showallmtx')
def ShowAllMtx(cmd_args=None):
""" Routine to print a summary listing of all mutexes
"""
if kern.ptrsize == 8:
hdr_format = '{:<18s} {:>10s} {:>10s} {:>10s} {:>10s} {:<30s} '
else:
hdr_format = '{:<10s} {:>10s} {:>10s} {:>10s} {:>10s} {:<30s} '
print hdr_format.format('LCK GROUP', 'CNT', 'UTIL', 'MISS', 'WAIT', 'NAME')
mtxgrp_queue_head = kern.globals.lck_grp_queue
mtxgrp_ptr_type = GetType('_lck_grp_ *')
for mtxgrp_ptr in IterateQueue(mtxgrp_queue_head, mtxgrp_ptr_type, "lck_grp_link"):
print GetMutexEntry(mtxgrp_ptr)
return
@lldb_type_summary(['_lck_grp_ *'])
def GetRWLEntry(rwlg):
""" Summarize a reader writer lock group with important information.
params:
rwlg: value - obj representing a reader writer lock group in kernel
returns:
out_string - summary of the reader writer lock group
"""
out_string = ""
if kern.ptrsize == 8:
format_string = '{0:#018x} {1:10d} {2:10d} {3:10d} {4:10d} {5: <30s} '
else:
format_string = '{0:#010x} {1:10d} {2:10d} {3:10d} {4:10d} {5: <30s} '
if rwlg.lck_grp_rwcnt:
out_string += format_string.format(rwlg, rwlg.lck_grp_rwcnt,rwlg.lck_grp_stat.lck_grp_rw_stat.lck_grp_rw_util_cnt,
rwlg.lck_grp_stat.lck_grp_rw_stat.lck_grp_rw_miss_cnt,
rwlg.lck_grp_stat.lck_grp_rw_stat.lck_grp_rw_wait_cnt, rwlg.lck_grp_name)
return out_string
@lldb_type_summary(['lck_mtx_t *'])
@header("===== Mutex Lock Summary =====")
def GetMutexLockSummary(mtx):
""" Summarize mutex lock with important information.
params:
mtx: value - obj representing a mutex lock in kernel
returns:
out_str - summary of the mutex lock
"""
if not mtx:
return "Invalid lock value: 0x0"
if kern.arch == "x86_64":
out_str = "Lock Type\t\t: MUTEX\n"
mtxd = mtx.lck_mtx_sw.lck_mtxd
out_str += "Owner Thread\t\t: {:#x}\n".format(mtxd.lck_mtxd_owner)
cmd_str = "p/d ((lck_mtx_t*){:#x})->lck_mtx_sw.lck_mtxd.".format(mtx)
cmd_out = lldb_run_command(cmd_str + "lck_mtxd_waiters")
out_str += "Number of Waiters\t: {:s}\n".format(cmd_out.split()[-1])
cmd_out = lldb_run_command(cmd_str + "lck_mtxd_ilocked")
out_str += "ILocked\t\t\t: {:s}\n".format(cmd_out.split()[-1])
cmd_out = lldb_run_command(cmd_str + "lck_mtxd_mlocked")
out_str += "MLocked\t\t\t: {:s}\n".format(cmd_out.split()[-1])
cmd_out = lldb_run_command(cmd_str + "lck_mtxd_promoted")
out_str += "Promoted\t\t: {:s}\n".format(cmd_out.split()[-1])
cmd_out = lldb_run_command(cmd_str + "lck_mtxd_spin")
out_str += "Spin\t\t\t: {:s}\n".format(cmd_out.split()[-1])
return out_str
out_str = "Lock Type\t\t: MUTEX\n"
out_str += "Owner Thread\t\t: {:#x}\n".format(mtx.lck_mtx_hdr.lck_mtxd_data & ~0x3)
out_str += "Number of Waiters\t: {:d}\n".format(mtx.lck_mtx_sw.lck_mtxd.lck_mtxd_waiters)
out_str += "Flags\t\t\t: "
if mtx.lck_mtx_hdr.lck_mtxd_data & 0x1:
out_str += "[Interlock Locked] "
if mtx.lck_mtx_hdr.lck_mtxd_data & 0x2:
out_str += "[Wait Flag]"
if (mtx.lck_mtx_hdr.lck_mtxd_data & 0x3) == 0:
out_str += "None"
return out_str
@lldb_type_summary(['lck_spin_t *'])
@header("===== SpinLock Summary =====")
def GetSpinLockSummary(spinlock):
""" Summarize spinlock with important information.
params:
spinlock: value - obj representing a spinlock in kernel
returns:
out_str - summary of the spinlock
"""
if not spinlock:
return "Invalid lock value: 0x0"
out_str = "Lock Type\t\t: SPINLOCK\n"
if kern.arch == "x86_64":
out_str += "Interlock\t\t: {:#x}\n".format(spinlock.interlock)
return out_str
out_str += "Owner Thread\t\t: {:#x}\n".format(spinlock.lck_spin_data & ~0x3)
out_str += "Flags\t\t\t: "
if spinlock.lck_spin_data & 0x1:
out_str += "[Interlock Locked] "
if spinlock.lck_spin_data & 0x2:
out_str += "[Wait Flag]"
if (spinlock.lck_spin_data & 0x3) == 0:
out_str += "None"
return out_str
@lldb_command('showlock', 'MS')
def ShowLock(cmd_args=None, cmd_options={}):
""" Show info about a lock - its state and owner thread details
Usage: showlock <address of a lock>
-M : to consider <addr> as lck_mtx_t
-S : to consider <addr> as lck_spin_t
"""
if not cmd_args:
raise ArgumentError("Please specify the address of the lock whose info you want to view.")
return
summary_str = ""
lock = kern.GetValueFromAddress(cmd_args[0], 'uintptr_t*')
if kern.arch == "x86_64" and lock:
if "-M" in cmd_options:
lock_mtx = Cast(lock, 'lck_mtx_t *')
summary_str = GetMutexLockSummary(lock_mtx)
elif "-S" in cmd_options:
lock_spin = Cast(lock, 'lck_spin_t *')
summary_str = GetSpinLockSummary(lock_spin)
else:
summary_str = "Please specify supported lock option(-M/-S)"
print summary_str
return
if lock:
lock_mtx = Cast(lock, 'lck_mtx_t*')
if lock_mtx.lck_mtx_type == 0x22:
summary_str = GetMutexLockSummary(lock_mtx)
lock_spin = Cast(lock, 'lck_spin_t*')
if lock_spin.lck_spin_type == 0x11:
summary_str = GetSpinLockSummary(lock_spin)
if summary_str == "":
summary_str = "Lock Type\t\t: INVALID LOCK"
print summary_str
@lldb_command('showallrwlck')
def ShowAllRWLck(cmd_args=None):
""" Routine to print a summary listing of all read/writer locks
"""
if kern.ptrsize == 8:
hdr_format = '{:<18s} {:>10s} {:>10s} {:>10s} {:>10s} {:<30s} '
else:
hdr_format = '{:<10s} {:>10s} {:>10s} {:>10s} {:>10s} {:<30s} '
print hdr_format.format('LCK GROUP', 'CNT', 'UTIL', 'MISS', 'WAIT', 'NAME')
rwlgrp_queue_head = kern.globals.lck_grp_queue
rwlgrp_ptr_type = GetType('_lck_grp_ *')
for rwlgrp_ptr in IterateQueue(rwlgrp_queue_head, rwlgrp_ptr_type, "lck_grp_link"):
print GetRWLEntry(rwlgrp_ptr)
return
@lldb_command('showbootermemorymap')
def ShowBooterMemoryMap(cmd_args=None):
""" Prints out the phys memory map from kernelBootArgs
Supported only on x86_64
"""
if kern.arch == 'x86_64':
voffset = unsigned(0xFFFFFF8000000000)
else:
print "showbootermemorymap not supported on this architecture"
return
out_string = ""
memtype_dict = {
0: 'Reserved',
1: 'LoaderCode',
2: 'LoaderData',
3: 'BS_code',
4: 'BS_data',
5: 'RT_code',
6: 'RT_data',
7: 'Convention',
8: 'Unusable',
9: 'ACPI_recl',
10: 'ACPI_NVS',
11: 'MemMapIO',
12: 'MemPortIO',
13: 'PAL_code'
}
boot_args = kern.globals.kernelBootArgs
msize = boot_args.MemoryMapDescriptorSize
mcount = (boot_args.MemoryMapSize) / unsigned(msize)
out_string += "{0: <12s} {1: <19s} {2: <19s} {3: <19s} {4: <10s}\n".format("Type", "Physical Start", "Number of Pages", "Virtual Start", "Attributes")
i = 0
while i < mcount:
mptr = kern.GetValueFromAddress(unsigned(boot_args.MemoryMap) + voffset + unsigned(i*msize), 'EfiMemoryRange *')
mtype = unsigned(mptr.Type)
if mtype in memtype_dict:
out_string += "{0: <12s}".format(memtype_dict[mtype])
else:
out_string += "{0: <12s}".format("UNKNOWN")
if mptr.VirtualStart == 0:
out_string += "{0: #019x} {1: #019x} {2: <19s} {3: #019x}\n".format(mptr.PhysicalStart, mptr.NumberOfPages, ' '*19, mptr.Attribute)
else:
out_string += "{0: #019x} {1: #019x} {2: #019x} {3: #019x}\n".format(mptr.PhysicalStart, mptr.NumberOfPages, mptr.VirtualStart, mptr.Attribute)
i = i + 1
print out_string
@lldb_command('show_all_purgeable_objects')
def ShowAllPurgeableVmObjects(cmd_args=None):
""" Routine to print a summary listing of all the purgeable vm objects
"""
print "\n-------------------- VOLATILE OBJECTS --------------------\n"
ShowAllPurgeableVolatileVmObjects()
print "\n-------------------- NON-VOLATILE OBJECTS --------------------\n"
ShowAllPurgeableNonVolatileVmObjects()
@lldb_command('show_all_purgeable_nonvolatile_objects')
def ShowAllPurgeableNonVolatileVmObjects(cmd_args=None):
""" Routine to print a summary listing of all the vm objects in
the purgeable_nonvolatile_queue
"""
nonvolatile_total = lambda:None
nonvolatile_total.objects = 0
nonvolatile_total.vsize = 0
nonvolatile_total.rsize = 0
nonvolatile_total.wsize = 0
nonvolatile_total.csize = 0
nonvolatile_total.disowned_objects = 0
nonvolatile_total.disowned_vsize = 0
nonvolatile_total.disowned_rsize = 0
nonvolatile_total.disowned_wsize = 0
nonvolatile_total.disowned_csize = 0
queue_len = kern.globals.purgeable_nonvolatile_count
queue_head = kern.globals.purgeable_nonvolatile_queue
print 'purgeable_nonvolatile_queue:{:#018x} purgeable_volatile_count:{:d}\n'.format(kern.GetLoadAddressForSymbol('purgeable_nonvolatile_queue'),queue_len)
print 'N:non-volatile V:volatile E:empty D:deny\n'
print '{:>6s} {:<6s} {:18s} {:1s} {:>6s} {:>16s} {:>10s} {:>10s} {:>10s} {:18s} {:>6s} {:<20s}\n'.format("#","#","object","P","refcnt","size (pages)","resid","wired","compressed","owner","pid","process")
idx = 0
for object in IterateQueue(queue_head, 'struct vm_object *', 'objq'):
idx += 1
ShowPurgeableNonVolatileVmObject(object, idx, queue_len, nonvolatile_total)
print "disowned objects:{:<10d} [ virtual:{:<10d} resident:{:<10d} wired:{:<10d} compressed:{:<10d} ]\n".format(nonvolatile_total.disowned_objects, nonvolatile_total.disowned_vsize, nonvolatile_total.disowned_rsize, nonvolatile_total.disowned_wsize, nonvolatile_total.disowned_csize)
print " all objects:{:<10d} [ virtual:{:<10d} resident:{:<10d} wired:{:<10d} compressed:{:<10d} ]\n".format(nonvolatile_total.objects, nonvolatile_total.vsize, nonvolatile_total.rsize, nonvolatile_total.wsize, nonvolatile_total.csize)
def ShowPurgeableNonVolatileVmObject(object, idx, queue_len, nonvolatile_total):
""" Routine to print out a summary a VM object in purgeable_nonvolatile_queue
params:
object - core.value : a object of type 'struct vm_object *'
returns:
None
"""
page_size = kern.globals.page_size
if object.purgable == 0:
purgable = "N"
elif object.purgable == 1:
purgable = "V"
elif object.purgable == 2:
purgable = "E"
elif object.purgable == 3:
purgable = "D"
else:
purgable = "?"
if object.pager == 0:
compressed_count = 0
else:
compressor_pager = Cast(object.pager, 'compressor_pager *')
compressed_count = compressor_pager.cpgr_num_slots_occupied
print "{:>6d}/{:<6d} {:#018x} {:1s} {:>6d} {:>16d} {:>10d} {:>10d} {:>10d} {:#018x} {:>6d} {:<20s}\n".format(idx,queue_len,object,purgable,object.ref_count,object.vo_un1.vou_size/page_size,object.resident_page_count,object.wired_page_count,compressed_count, object.vo_un2.vou_purgeable_owner,GetProcPIDForTask(object.vo_un2.vou_purgeable_owner),GetProcNameForTask(object.vo_un2.vou_purgeable_owner))
nonvolatile_total.objects += 1
nonvolatile_total.vsize += object.vo_un1.vou_size/page_size
nonvolatile_total.rsize += object.resident_page_count
nonvolatile_total.wsize += object.wired_page_count
nonvolatile_total.csize += compressed_count
if object.vo_un2.vou_purgeable_owner == 0:
nonvolatile_total.disowned_objects += 1
nonvolatile_total.disowned_vsize += object.vo_un1.vou_size/page_size
nonvolatile_total.disowned_rsize += object.resident_page_count
nonvolatile_total.disowned_wsize += object.wired_page_count
nonvolatile_total.disowned_csize += compressed_count
@lldb_command('show_all_purgeable_volatile_objects')
def ShowAllPurgeableVolatileVmObjects(cmd_args=None):
""" Routine to print a summary listing of all the vm objects in
the purgeable queues
"""
volatile_total = lambda:None
volatile_total.objects = 0
volatile_total.vsize = 0
volatile_total.rsize = 0
volatile_total.wsize = 0
volatile_total.csize = 0
volatile_total.disowned_objects = 0
volatile_total.disowned_vsize = 0
volatile_total.disowned_rsize = 0
volatile_total.disowned_wsize = 0
volatile_total.disowned_csize = 0
purgeable_queues = kern.globals.purgeable_queues
print "---------- OBSOLETE\n"
ShowPurgeableQueue(purgeable_queues[0], volatile_total)
print "\n\n---------- FIFO\n"
ShowPurgeableQueue(purgeable_queues[1], volatile_total)
print "\n\n---------- LIFO\n"
ShowPurgeableQueue(purgeable_queues[2], volatile_total)
print "disowned objects:{:<10d} [ virtual:{:<10d} resident:{:<10d} wired:{:<10d} compressed:{:<10d} ]\n".format(volatile_total.disowned_objects, volatile_total.disowned_vsize, volatile_total.disowned_rsize, volatile_total.disowned_wsize, volatile_total.disowned_csize)
print " all objects:{:<10d} [ virtual:{:<10d} resident:{:<10d} wired:{:<10d} compressed:{:<10d} ]\n".format(volatile_total.objects, volatile_total.vsize, volatile_total.rsize, volatile_total.wsize, volatile_total.csize)
purgeable_count = kern.globals.vm_page_purgeable_count
purgeable_wired_count = kern.globals.vm_page_purgeable_wired_count
if purgeable_count != volatile_total.rsize or purgeable_wired_count != volatile_total.wsize:
mismatch = "<--------- MISMATCH\n"
else:
mismatch = ""
print "vm_page_purgeable_count: resident:{:<10d} wired:{:<10d} {:s}\n".format(purgeable_count, purgeable_wired_count, mismatch)
def ShowPurgeableQueue(qhead, volatile_total):
print "----- GROUP 0\n"
ShowPurgeableGroup(qhead.objq[0], volatile_total)
print "----- GROUP 1\n"
ShowPurgeableGroup(qhead.objq[1], volatile_total)
print "----- GROUP 2\n"
ShowPurgeableGroup(qhead.objq[2], volatile_total)
print "----- GROUP 3\n"
ShowPurgeableGroup(qhead.objq[3], volatile_total)
print "----- GROUP 4\n"
ShowPurgeableGroup(qhead.objq[4], volatile_total)
print "----- GROUP 5\n"
ShowPurgeableGroup(qhead.objq[5], volatile_total)
print "----- GROUP 6\n"
ShowPurgeableGroup(qhead.objq[6], volatile_total)
print "----- GROUP 7\n"
ShowPurgeableGroup(qhead.objq[7], volatile_total)
def ShowPurgeableGroup(qhead, volatile_total):
idx = 0
for object in IterateQueue(qhead, 'struct vm_object *', 'objq'):
if idx == 0:
print "{:>6s} {:18s} {:1s} {:>6s} {:>16s} {:>10s} {:>10s} {:>10s} {:18s} {:>6s} {:<20s}\n".format("#","object","P","refcnt","size (pages)","resid","wired","compressed","owner","pid","process")
idx += 1
ShowPurgeableVolatileVmObject(object, idx, volatile_total)
def ShowPurgeableVolatileVmObject(object, idx, volatile_total):
""" Routine to print out a summary a VM object in a purgeable queue
params:
object - core.value : a object of type 'struct vm_object *'
returns:
None
"""
page_size = kern.globals.page_size
if object.purgable == 0:
purgable = "N"
elif object.purgable == 1:
purgable = "V"
elif object.purgable == 2:
purgable = "E"
elif object.purgable == 3:
purgable = "D"
else:
purgable = "?"
if object.pager == 0:
compressed_count = 0
else:
compressor_pager = Cast(object.pager, 'compressor_pager *')
compressed_count = compressor_pager.cpgr_num_slots_occupied
print "{:>6d} {:#018x} {:1s} {:>6d} {:>16d} {:>10d} {:>10d} {:>10d} {:#018x} {:>6d} {:<20s}\n".format(idx,object,purgable,object.ref_count,object.vo_un1.vou_size/page_size,object.resident_page_count,object.wired_page_count,compressed_count, object.vo_un2.vou_purgeable_owner,GetProcPIDForTask(object.vo_un2.vou_purgeable_owner),GetProcNameForTask(object.vo_un2.vou_purgeable_owner))
volatile_total.objects += 1
volatile_total.vsize += object.vo_un1.vou_size/page_size
volatile_total.rsize += object.resident_page_count
volatile_total.wsize += object.wired_page_count
volatile_total.csize += compressed_count
if object.vo_un2.vou_purgeable_owner == 0:
volatile_total.disowned_objects += 1
volatile_total.disowned_vsize += object.vo_un1.vou_size/page_size
volatile_total.disowned_rsize += object.resident_page_count
volatile_total.disowned_wsize += object.wired_page_count
volatile_total.disowned_csize += compressed_count
def GetCompressedPagesForObject(obj):
"""Stuff
"""
pager = Cast(obj.pager, 'compressor_pager_t')
return pager.cpgr_num_slots_occupied
def ShowTaskVMEntries(task, show_pager_info, show_all_shadows):
""" Routine to print out a summary listing of all the entries in a vm_map
params:
task - core.value : a object of type 'task *'
returns:
None
"""
print "vm_map entries for task " + hex(task)
print GetTaskSummary.header
print GetTaskSummary(task)
if not task.map:
print "Task {0: <#020x} has map = 0x0"
return None
showmapvme(task.map, show_pager_info, show_all_shadows)
@lldb_command("showmapvme", "PS")
def ShowMapVME(cmd_args=None, cmd_options={}):
"""Routine to print out info about the specified vm_map and its vm entries
usage: showmapvme <vm_map>
Use -S flag to show VM object shadow chains
Use -P flag to show pager info (mapped file, compressed pages, ...)
"""
if cmd_args == None or len(cmd_args) < 1:
print "Invalid argument.", ShowMap.__doc__
return
show_pager_info = False
show_all_shadows = False
if "-P" in cmd_options:
show_pager_info = True
if "-S" in cmd_options:
show_all_shadows = True
map = kern.GetValueFromAddress(cmd_args[0], 'vm_map_t')
showmapvme(map, show_pager_info, show_all_shadows)
def showmapvme(map, show_pager_info, show_all_shadows):
page_size = kern.globals.page_size
vnode_pager_ops = kern.globals.vnode_pager_ops
vnode_pager_ops_addr = unsigned(addressof(vnode_pager_ops))
rsize = 0
if map.pmap != 0:
rsize = int(map.pmap.stats.resident_count)
print "{:<18s} {:<18s} {:<18s} {:>10s} {:>18s} {:>18s}:{:<18s}".format("vm_map","pmap","size","#ents","rsize","start","end")
print "{:#018x} {:#018x} {:#018x} {:>10d} {:>18d} {:#018x}:{:#018x}".format(map,map.pmap,unsigned(map.size),map.hdr.nentries,rsize,map.hdr.links.start,map.hdr.links.end)
vme_list_head = map.hdr.links
vme_ptr_type = GetType('vm_map_entry *')
print "{:<18s} {:>18s}:{:<18s} {:>10s} {:<8s} {:<10s} {:<18s} {:<18s}".format("entry","start","end","#pgs","tag.kmod","prot&flags","object","offset")
last_end = unsigned(map.hdr.links.start)
for vme in IterateQueue(vme_list_head, vme_ptr_type, "links"):
if unsigned(vme.links.start) != last_end:
print "{:18s} {:#018x}:{:#018x} {:>10d}".format("------------------",last_end,vme.links.start,(unsigned(vme.links.start) - last_end)/page_size)
last_end = unsigned(vme.links.end)
size = unsigned(vme.links.end) - unsigned(vme.links.start)
object = vme.vme_object.vmo_object
if object == 0:
object_str = "{:<#018x}".format(object)
elif vme.is_sub_map:
if object == kern.globals.bufferhdr_map:
object_str = "BUFFERHDR_MAP"
elif object == kern.globals.mb_map:
object_str = "MB_MAP"
elif object == kern.globals.bsd_pageable_map:
object_str = "BSD_PAGEABLE_MAP"
elif object == kern.globals.ipc_kernel_map:
object_str = "IPC_KERNEL_MAP"
elif object == kern.globals.ipc_kernel_copy_map:
object_str = "IPC_KERNEL_COPY_MAP"
elif object == kern.globals.kalloc_map:
object_str = "KALLOC_MAP"
elif object == kern.globals.zone_map:
object_str = "ZONE_MAP"
elif hasattr(kern.globals, 'gzalloc_map') and object == kern.globals.gzalloc_map:
object_str = "GZALLOC_MAP"
elif hasattr(kern.globals, 'g_kext_map') and object == kern.globals.g_kext_map:
object_str = "G_KEXT_MAP"
elif hasattr(kern.globals, 'vector_upl_submap') and object == kern.globals.vector_upl_submap:
object_str = "VECTOR_UPL_SUBMAP"
else:
object_str = "submap:{:<#018x}".format(object)
else:
if object == kern.globals.kernel_object:
object_str = "KERNEL_OBJECT"
elif object == kern.globals.vm_submap_object:
object_str = "VM_SUBMAP_OBJECT"
elif object == kern.globals.compressor_object:
object_str = "COMPRESSOR_OBJECT"
else:
object_str = "{:<#018x}".format(object)
offset = unsigned(vme.vme_offset) & ~0xFFF
tag = unsigned(vme.vme_offset & 0xFFF)
vme_flags = ""
if vme.is_sub_map:
vme_flags += "s"
if vme.needs_copy:
vme_flags += "n"
if vme.is_sub_map and vme.use_pmap:
vme_flags += "p"
tagstr = ""
if map.pmap == kern.globals.kernel_pmap:
xsite = Cast(kern.globals.vm_allocation_sites[tag],'OSKextAccount *')
if xsite and xsite.site.flags & 2:
tagstr = ".{:<3d}".format(xsite.loadTag)
print "{:#018x} {:#018x}:{:#018x} {:>10d} {:>3d}{:<4s} {:1d}{:1d}{:<8s} {:<18s} {:<#18x}".format(vme,vme.links.start,vme.links.end,(unsigned(vme.links.end)-unsigned(vme.links.start))/page_size,tag,tagstr,vme.protection,vme.max_protection,vme_flags,object_str,offset)
if (show_pager_info or show_all_shadows) and vme.is_sub_map == 0 and vme.vme_object.vmo_object != 0:
object = vme.vme_object.vmo_object
else:
object = 0
depth = 0
while object != 0:
depth += 1
if show_all_shadows == False and depth != 1 and object.shadow != 0:
offset += unsigned(object.vo_un2.vou_shadow_offset)
object = object.shadow
continue
if object.copy_strategy == 0:
copy_strategy="N"
elif object.copy_strategy == 2:
copy_strategy="D"
elif object.copy_strategy == 4:
copy_strategy="S"
else:
copy_strategy=str(object.copy_strategy)
if object.internal:
internal = "internal"
else:
internal = "external"
pager_string = ""
pager = object.pager
if show_pager_info and pager != 0:
if object.internal:
pager_string = "-> compressed:{:d}".format(GetCompressedPagesForObject(object))
elif unsigned(pager.mo_pager_ops) == vnode_pager_ops_addr:
vnode_pager = Cast(pager,'vnode_pager *')
pager_string = "-> " + GetVnodePath(vnode_pager.vnode_handle)
else:
pager_string = "-> {:s}:{:#018x}".format(pager.mo_pager_ops.memory_object_pager_name, pager.mo_pager_ops)
print "{:>18d} {:#018x}:{:#018x} {:#018x} ref:{:<6d} ts:{:1d} strat:{:1s} {:s} ({:d} {:d} {:d}) {:s}".format(depth,offset,offset+size,object,object.ref_count,object.true_share,copy_strategy,internal,unsigned(object.vo_un1.vou_size)/page_size,object.resident_page_count,object.wired_page_count,pager_string)
offset += unsigned(object.vo_un2.vou_shadow_offset)
object = object.shadow
if unsigned(map.hdr.links.end) > last_end:
print "{:18s} {:#018x}:{:#018x} {:>10d}".format("------------------",last_end,map.hdr.links.end,(unsigned(map.hdr.links.end) - last_end)/page_size)
return None
def CountMapTags(map, tagcounts, slow):
page_size = unsigned(kern.globals.page_size)
vme_list_head = map.hdr.links
vme_ptr_type = GetType('vm_map_entry *')
for vme in IterateQueue(vme_list_head, vme_ptr_type, "links"):
object = vme.vme_object.vmo_object
tag = vme.vme_offset & 0xFFF
if object == kern.globals.kernel_object:
count = 0
if not slow:
count = unsigned(vme.links.end - vme.links.start) / page_size
else:
addr = unsigned(vme.links.start)
while addr < unsigned(vme.links.end):
hash_id = _calc_vm_page_hash(object, addr)
page_list = kern.globals.vm_page_buckets[hash_id].page_list
page = _vm_page_unpack_ptr(page_list)
while (page != 0):
vmpage = kern.GetValueFromAddress(page, 'vm_page_t')
if (addr == unsigned(vmpage.offset)) and (object == vmpage.object):
if (not vmpage.local) and (vmpage.wire_count > 0):
count += 1
break
page = _vm_page_unpack_ptr(vmpage.next_m)
addr += page_size
tagcounts[tag] += count
elif vme.is_sub_map:
CountMapTags(Cast(object,'vm_map_t'), tagcounts, slow)
return None
def CountWiredObject(object, tagcounts):
tagcounts[unsigned(object.wire_tag)] += object.wired_page_count
return None
def CountWiredPurgeableGroup(qhead, tagcounts):
for object in IterateQueue(qhead, 'struct vm_object *', 'objq'):
CountWiredObject(object, tagcounts)
return None
def CountWiredPurgeableQueue(qhead, tagcounts):
CountWiredPurgeableGroup(qhead.objq[0], tagcounts)
CountWiredPurgeableGroup(qhead.objq[1], tagcounts)
CountWiredPurgeableGroup(qhead.objq[2], tagcounts)
CountWiredPurgeableGroup(qhead.objq[3], tagcounts)
CountWiredPurgeableGroup(qhead.objq[4], tagcounts)
CountWiredPurgeableGroup(qhead.objq[5], tagcounts)
CountWiredPurgeableGroup(qhead.objq[6], tagcounts)
CountWiredPurgeableGroup(qhead.objq[7], tagcounts)
def GetKmodIDName(kmod_id):
kmod_val = kern.globals.kmod
for kmod in IterateLinkedList(kmod_val, 'next'):
if (kmod.id == kmod_id):
return "{:<50s}".format(kmod.name)
return "??"
def GetVMKernName(tag):
if 1 == tag:
return "VM_KERN_MEMORY_OSFMK"
elif 2 == tag:
return "VM_KERN_MEMORY_BSD"
elif 3 == tag:
return "VM_KERN_MEMORY_IOKIT"
elif 4 == tag:
return "VM_KERN_MEMORY_LIBKERN"
elif 5 == tag:
return "VM_KERN_MEMORY_OSKEXT"
elif 6 == tag:
return "VM_KERN_MEMORY_KEXT"
elif 7 == tag:
return "VM_KERN_MEMORY_IPC"
elif 8 == tag:
return "VM_KERN_MEMORY_STACK"
elif 9 == tag:
return "VM_KERN_MEMORY_CPU"
elif 10 == tag:
return "VM_KERN_MEMORY_PMAP"
elif 11 == tag:
return "VM_KERN_MEMORY_PTE"
elif 12 == tag:
return "VM_KERN_MEMORY_ZONE"
elif 13 == tag:
return "VM_KERN_MEMORY_KALLOC"
elif 14 == tag:
return "VM_KERN_MEMORY_COMPRESSOR"
elif 15 == tag:
return "VM_KERN_MEMORY_COMPRESSED_DATA"
elif 16 == tag:
return "VM_KERN_MEMORY_PHANTOM_CACHE"
elif 17 == tag:
return "VM_KERN_MEMORY_WAITQ"
elif 18 == tag:
return "VM_KERN_MEMORY_DIAG"
elif 19 == tag:
return "VM_KERN_MEMORY_LOG"
elif 20 == tag:
return "VM_KERN_MEMORY_FILE"
elif 21 == tag:
return "VM_KERN_MEMORY_MBUF"
elif 22 == tag:
return "VM_KERN_MEMORY_UBC"
elif 23 == tag:
return "VM_KERN_MEMORY_SECURITY"
elif 24 == tag:
return "VM_KERN_MEMORY_MLOCK"
return "??"
@lldb_command("showvmtags", "S")
def showvmtags(cmd_args=None, cmd_options={}):
"""Routine to print out info about kernel wired page allocations
usage: showvmtags
iterates kernel map and vm objects totaling allocations by tag.
usage: showvmtags -S
also iterates kernel object pages individually - slow.
"""
slow = False
if "-S" in cmd_options:
slow = True
page_size = unsigned(kern.globals.page_size)
tagcounts = []
for tag in range(256):
tagcounts.append(0)
queue_head = kern.globals.vm_objects_wired
for object in IterateQueue(queue_head, 'struct vm_object *', 'objq'):
CountWiredObject(object, tagcounts)
queue_head = kern.globals.purgeable_nonvolatile_queue
for object in IterateQueue(queue_head, 'struct vm_object *', 'objq'):
CountWiredObject(object, tagcounts)
purgeable_queues = kern.globals.purgeable_queues
CountWiredPurgeableQueue(purgeable_queues[0], tagcounts)
CountWiredPurgeableQueue(purgeable_queues[1], tagcounts)
CountWiredPurgeableQueue(purgeable_queues[2], tagcounts)
CountMapTags(kern.globals.kernel_map, tagcounts, slow)
total = 0
print " {:<8s} {:>7s} {:<50s}".format("tag.kmod","size","name")
for tag in range(256):
if tagcounts[tag]:
total += tagcounts[tag]
tagstr = ""
sitestr = ""
if (tag <= 24):
sitestr = GetVMKernName(tag)
else:
site = kern.globals.vm_allocation_sites[tag]
if site:
if site.flags & 2:
xsite = Cast(site,'OSKextAccount *')
tagstr = ".{:<3d}".format(xsite.loadTag)
sitestr = GetKmodIDName(xsite.loadTag)
else:
sitestr = kern.Symbolicate(site)
print " {:>3d}{:<4s} {:>7d}K {:<50s}".format(tag,tagstr,tagcounts[tag]*page_size / 1024,sitestr)
print "Total: {:>7d}K".format(total*page_size / 1024)
return None
def FindVMEntriesForVnode(task, vn):
""" returns an array of vme that have the vnode set to defined vnode
each entry in array is of format (vme, start_addr, end_address, protection)
"""
retval = []
vmmap = task.map
pmap = vmmap.pmap
pager_ops_addr = unsigned(addressof(kern.globals.vnode_pager_ops))
debuglog("pager_ops_addr %s" % hex(pager_ops_addr))
if unsigned(pmap) == 0:
return retval
vme_list_head = vmmap.hdr.links
vme_ptr_type = gettype('vm_map_entry *')
for vme in IterateQueue(vme_list_head, vme_ptr_type, 'links'):
if unsigned(vme.is_sub_map) == 0 and unsigned(vme.vme_object.vmo_object) != 0:
obj = vme.vme_object.vmo_object
else:
continue
while obj != 0:
if obj.pager != 0:
if obj.internal:
pass
else:
vn_pager = Cast(obj.pager, 'vnode_pager *')
if unsigned(vn_pager.pager_ops) == pager_ops_addr and unsigned(vn_pager.vnode_handle) == unsigned(vn):
retval.append((vme, unsigned(vme.links.start), unsigned(vme.links.end), unsigned(vme.protection)))
obj = obj.shadow
return retval
@lldb_command('showtaskloadinfo')
def ShowTaskLoadInfo(cmd_args=None, cmd_options={}):
""" Print the load address and uuid for the process
Usage: (lldb)showtaskloadinfo <task_t>
"""
if not cmd_args:
raise ArgumentError("Insufficient arguments")
t = kern.GetValueFromAddress(cmd_args[0], 'struct task *')
print_format = "0x{0:x} - 0x{1:x} {2: <50s} (??? - ???) <{3: <36s}> {4: <50s}"
p = Cast(t.bsd_info, 'struct proc *')
uuid = p.p_uuid
uuid_out_string = "{a[0]:02X}{a[1]:02X}{a[2]:02X}{a[3]:02X}-{a[4]:02X}{a[5]:02X}-{a[6]:02X}{a[7]:02X}-{a[8]:02X}{a[9]:02X}-{a[10]:02X}{a[11]:02X}{a[12]:02X}{a[13]:02X}{a[14]:02X}{a[15]:02X}".format(a=uuid)
filepath = GetVnodePath(p.p_textvp)
libname = filepath.split('/')[-1]
mappings = FindVMEntriesForVnode(t, p.p_textvp)
load_addr = 0
end_addr = 0
for m in mappings:
if m[3] == 5:
load_addr = m[1]
end_addr = m[2]
print print_format.format(load_addr, end_addr, libname, uuid_out_string, filepath)
return None
@header("{0: <20s} {1: <20s} {2: <20s}".format("vm_page_t", "offset", "object"))
@lldb_command('vmpagelookup')
def VMPageLookup(cmd_args=None):
""" Print the pages in the page bucket corresponding to the provided object and offset.
Usage: (lldb)vmpagelookup <vm_object_t> <vm_offset_t>
"""
if cmd_args == None or len(cmd_args) < 2:
raise ArgumentError("Please specify an object and offset.")
format_string = "{0: <#020x} {1: <#020x} {2: <#020x}\n"
obj = kern.GetValueFromAddress(cmd_args[0],'unsigned long long')
off = kern.GetValueFromAddress(cmd_args[1],'unsigned long long')
hash_id = _calc_vm_page_hash(obj, off)
page_list = kern.globals.vm_page_buckets[hash_id].page_list
print("hash_id: 0x%x page_list: 0x%x\n" % (unsigned(hash_id), unsigned(page_list)))
print VMPageLookup.header
page = _vm_page_unpack_ptr(page_list)
while (page != 0) :
pg_t = kern.GetValueFromAddress(page, 'vm_page_t')
print format_string.format(page, pg_t.offset, pg_t.object)
page = _vm_page_unpack_ptr(pg_t.next_m)
def _vm_page_unpack_ptr(page):
if kern.ptrsize == 4 :
return page
if page == 0 :
return page
min_addr = kern.globals.vm_min_kernel_and_kext_address
return ((page << 6) + min_addr)
@lldb_command('calcvmpagehash')
def CalcVMPageHash(cmd_args=None):
""" Get the page bucket corresponding to the provided object and offset.
Usage: (lldb)calcvmpagehash <vm_object_t> <vm_offset_t>
"""
if cmd_args == None or len(cmd_args) < 2:
raise ArgumentError("Please specify an object and offset.")
obj = kern.GetValueFromAddress(cmd_args[0],'unsigned long long')
off = kern.GetValueFromAddress(cmd_args[1],'unsigned long long')
hash_id = _calc_vm_page_hash(obj, off)
print("hash_id: 0x%x page_list: 0x%x\n" % (unsigned(hash_id), unsigned(kern.globals.vm_page_buckets[hash_id].page_list)))
return None
def _calc_vm_page_hash(obj, off):
bucket_hash = (int) (kern.globals.vm_page_bucket_hash)
hash_mask = (int) (kern.globals.vm_page_hash_mask)
one = (obj * bucket_hash) & 0xFFFFFFFF
two = off >> unsigned(kern.globals.page_shift)
three = two ^ bucket_hash
four = one + three
hash_id = four & hash_mask
return hash_id
@header("{0: <10s} of {1: <10s} {2: <20s} {3: <20s} {4: <20s} {5: <10s} {6: <5s}\t {7: <28s}\t{8: <50s}".format("index", "total", "vm_page_t", "offset", "next", "phys_page", "wire#", "first bitfield", "second bitfield"))
@lldb_command('vmobjectwalkpages', 'SBNQP:')
def VMObjectWalkPages(cmd_args=None, cmd_options={}):
""" Print the resident pages contained in the provided object. If a vm_page_t is provided as well, we
specifically look for this page, highlighting it in the output or noting if it was not found. For
each page, we confirm that it points to the object. We also keep track of the number of pages we
see and compare this to the object's resident page count field.
Usage:
vmobjectwalkpages <vm_object_t> : Walk and print all the pages for a given object (up to 4K pages by default)
vmobjectwalkpages <vm_object_t> -B : Walk and print all the pages for a given object (up to 4K pages by default), traversing the memq backwards
vmobjectwalkpages <vm_object_t> -N : Walk and print all the pages for a given object, ignore the page limit
vmobjectwalkpages <vm_object_t> -Q : Walk all pages for a given object, looking for known signs of corruption (i.e. inactive and active both being set for a page)
vmobjectwalkpages <vm_object_t> -P <vm_page_t> : Walk all the pages for a given object, annotate the specified page in the output with ***
vmobjectwalkpages <vm_object_t> -P <vm_page_t> -S : Walk all the pages for a given object, stopping when we find the specified page
"""
if (cmd_args == None or len(cmd_args) < 1):
raise ArgumentError("Please specify at minimum a vm_object_t and optionally a vm_page_t")
out_string = ""
obj = kern.GetValueFromAddress(cmd_args[0], 'vm_object_t')
page = 0
if "-P" in cmd_options:
page = kern.GetValueFromAddress(cmd_options['-P'], 'vm_page_t')
stop = 0
if "-S" in cmd_options:
if page == 0:
raise ArgumentError("-S can only be passed when a page is specified with -P")
stop = 1
walk_backwards = False
if "-B" in cmd_options:
walk_backwards = True
quiet_mode = False
if "-Q" in cmd_options:
quiet_mode = True
if not quiet_mode:
print VMObjectWalkPages.header
format_string = "{0: <#10d} of {1: <#10d} {2: <#020x} {3: <#020x} {4: <#020x} {5: <#010x} {6: <#05d}\t"
first_bitfield_format_string = "{0: <#1d}:{1: <#1d}:{2: <#1d}:{3: <#1d}:{4: <#1d}:{5: <#1d}:{6: <#1d}:"
first_bitfield_format_string += "{7: <#1d}:{8: <#1d}:{9: <#1d}:{10: <#1d}:{11: <#1d}:{12: <#1d}"
second_bitfield_format_string = first_bitfield_format_string
second_bitfield_format_string += ":{13: <#1d}:{14: <#1d}:{15: <#1d}:{16: <#1d}:{17: <#1d}:{18: <#1d}:{19: <#1d}:"
second_bitfield_format_string += "{20: <#1d}:{21: <#1d}:{22: <#1d}:{23: <#1d}:{24: <#1d}:{25: <#1d}:{26: <#1d}\n"
first_bitfield_format_string += "\t"
limit = 4096 ignore_limit = 0
if "-N" in cmd_options:
ignore_limit = 1
page_count = 0
res_page_count = unsigned(obj.resident_page_count)
page_found = False
pages_seen = set()
for vmp in IterateQueue(obj.memq, "vm_page_t", "listq", walk_backwards):
page_count += 1
out_string = ""
if (page != 0 and not(page_found) and vmp == page):
out_string += "******"
page_found = True
if page != 0 or quiet_mode:
if (page_count % 1000) == 0:
print "traversed %d pages ...\n" % (page_count)
else:
out_string += format_string.format(page_count, res_page_count, vmp, vmp.offset, vmp.listq.next, vmp.phys_page, vmp.wire_count)
out_string += first_bitfield_format_string.format(vmp.active, vmp.inactive, vmp.clean_queue, vmp.local, vmp.speculative,
vmp.throttled, vmp.free, vmp.pageout_queue, vmp.laundry, vmp.reference,
vmp.gobbled, vmp.private, vmp.no_cache)
out_string += second_bitfield_format_string.format(vmp.busy, vmp.wanted, vmp.tabled, vmp.hashed, vmp.fictitious, vmp.clustered,
vmp.clustered, vmp.pmapped, vmp.xpmapped, vmp.wpmapped, vmp.pageout, vmp.absent,
vmp.error, vmp.dirty, vmp.cleaning, vmp.precious, vmp.precious, vmp.overwriting,
vmp.restart, vmp.unusual, vmp.encrypted, vmp.encrypted, vmp.encrypted_cleaning,
vmp.cs_validated, vmp.cs_tainted, vmp.cs_nx, vmp.reusable, vmp.lopage, vmp.slid, vmp.compressor,
vmp.written_by_kernel)
if (vmp in pages_seen):
print out_string + "cycle detected! we've seen vm_page_t: " + "{0: <#020x}".format(unsigned(vmp)) + " twice. stopping...\n"
return
if (vmp.object != obj):
print out_string + " vm_page_t: " + "{0: <#020x}".format(unsigned(vmp)) + " points to different vm_object_t: " + "{0: <#020x}".format(unsigned(vmp.object))
return
if (not vmp.local) and (vmp.wire_count > 0):
if (vmp.active or vmp.inactive or vmp.speculative or vmp.throttled or vmp.pageout_queue):
print out_string + " wired page with wrong page queue attributes\n"
print "vm_page_t: " + "{0: <#020x}".format(unsigned(vmp)) + " active: %d inactive: %d speculative: %d throttled %d pageout_queue: %d\n" % (vmp.active,
vmp.inactive, vmp.speculative, vmp.throttled, vmp.pageout_queue)
print "stopping...\n"
return
if ((vmp.free + vmp.active + vmp.inactive + vmp.speculative + vmp.throttled + vmp.pageout_queue) > 1):
print out_string + " more than one pageout queue bit set active\n"
print "vm_page_t: " + "{0: <#020x}".format(unsigned(vmp)) + " free: %d active: %d inactive: %d speculative: %d throttled: %d pageout_queue: %d\n" % (vmp.free,
vmp.active, vmp.inactive, vmp.speculative, vmp.throttled, vmp.pageout_queue)
print "stopping...\n"
return
if ((vmp.__unused_pageq_bits != 0) or (vmp.__unused_object_bits != 0)):
print out_string + " unused bits not zero for vm_page_t: " + "{0: <#020x}".format(unsigned(vmp)) + " unused__pageq_bits: %d unused_object_bits : %d\n" % (vmp.__unused_pageq_bits,
vmp.__unused_object_bits)
print "stopping...\n"
return
pages_seen.add(vmp)
if False:
hash_id = _calc_vm_page_hash(obj, vmp.offset)
hash_page_list = kern.globals.vm_page_buckets[hash_id].page_list
hash_page = _vm_page_unpack_ptr(hash_page_list)
hash_page_t = 0
while (hash_page != 0):
hash_page_t = kern.GetValueFromAddress(hash_page, 'vm_page_t')
if hash_page_t == vmp:
break
hash_page = _vm_page_unpack_ptr(hash_page_t.next_m)
if (unsigned(vmp) != unsigned(hash_page_t)):
print out_string + "unable to find page: " + "{0: <#020x}".format(unsigned(vmp)) + " from object in kernel page bucket list\n"
print lldb_run_command("vm_page_info %s 0x%x" % (cmd_args[0], unsigned(vmp.offset)))
return
if (page_count >= limit and not(ignore_limit)):
print out_string + "Limit reached (%d pages), stopping..." % (limit)
return
print out_string
if page_found and stop:
print("Object reports resident page count of: %d we stopped after traversing %d and finding the requested page.\n" % (unsigned(obj.res_page_count), unsigned(page_count)))
return
if (page != 0):
print("page found? : %s\n" % page_found)
print("Object reports resident page count of %d, we saw %d pages when we walked the resident list.\n" % (unsigned(obj.resident_page_count), unsigned(page_count)))
@lldb_command("show_all_apple_protect_pagers")
def ShowAllAppleProtectPagers(cmd_args=None):
"""Routine to print all apple_protect pagers
usage: show_all_apple_protect_pagers
"""
print "{:>3s} {:<3s} {:<18s} {:>5s} {:>5s} {:>6s} {:<18s} {:<18s} {:<18s} {:<18s} {:<18s} {:<18s}\n".format("#", "#", "pager", "refs", "ready", "mapped", "mo_control", "object", "offset", "crypto_offset", "crypto_start", "crypto_end")
qhead = kern.globals.apple_protect_pager_queue
qtype = GetType('apple_protect_pager *')
qcnt = kern.globals.apple_protect_pager_count
idx = 0
for pager in IterateQueue(qhead, qtype, "pager_queue"):
idx = idx + 1
show_apple_protect_pager(pager, qcnt, idx)
@lldb_command("show_apple_protect_pager")
def ShowAppleProtectPager(cmd_args=None):
"""Routine to print out info about an apple_protect pager
usage: show_apple_protect_pager <pager>
"""
if cmd_args == None or len(cmd_args) < 1:
print "Invalid argument.", ShowMap.__doc__
return
pager = kern.GetValueFromAddress(cmd_ars[0], 'apple_protect_pager_t')
show_apple_protect_pager(pager, 1, 1)
def show_apple_protect_pager(pager, qcnt, idx):
object = pager.backing_object
shadow = object.shadow
while shadow != 0:
object = shadow
shadow = object.shadow
vnode_pager = Cast(object.pager,'vnode_pager *')
filename = GetVnodePath(vnode_pager.vnode_handle)
print "{:>3}/{:<3d} {:#018x} {:>5d} {:>5d} {:>6d} {:#018x} {:#018x} {:#018x} {:#018x} {:#018x} {:#018x}\n\tcrypt_info:{:#018x} <decrypt:{:#018x} end:{:#018x} ops:{:#018x} refs:{:<d}>\n\tvnode:{:#018x} {:s}\n".format(idx, qcnt, pager, pager.ref_count, pager.is_ready, pager.is_mapped, pager.pager_control, pager.backing_object, pager.backing_offset, pager.crypto_backing_offset, pager.crypto_start, pager.crypto_end, pager.crypt_info, pager.crypt_info.page_decrypt, pager.crypt_info.crypt_end, pager.crypt_info.crypt_ops, pager.crypt_info.crypt_refcnt, vnode_pager.vnode_handle, filename)