# -*- mode: makefile;-*-
#
# Copyright (C) 1999-2012 Apple Inc. All rights reserved.
#
# MakeInc.kernel augments the single-architecture
# recursive build system with rules specific
# to assembling and linking a kernel.
#
#
# Validate configuration options
#
ifeq ($(filter $(CURRENT_ARCH_CONFIG),$(SUPPORTED_ARCH_CONFIGS)),)
$(error Unsupported CURRENT_ARCH_CONFIG $(CURRENT_ARCH_CONFIG))
endif
ifeq ($(filter $(CURRENT_KERNEL_CONFIG),$(SUPPORTED_KERNEL_CONFIGS)),)
$(error Unsupported CURRENT_KERNEL_CONFIG $(CURRENT_KERNEL_CONFIG))
endif
ifeq ($(filter $(CURRENT_MACHINE_CONFIG),$(SUPPORTED_$(CURRENT_ARCH_CONFIG)_MACHINE_CONFIGS)),)
$(error Unsupported CURRENT_MACHINE_CONFIG $(CURRENT_MACHINE_CONFIG))
endif
ifeq ($(filter $(PLATFORM),$(SUPPORTED_PLATFORMS)),)
$(error Unsupported PLATFORM $(PLATFORM))
endif
STATIC_KMODS = $(SRCROOT)/kmods.a
#
# Rules for the highly parallel "build" phase, where each build configuration
# writes into their own $(TARGET) independent of other build configs
#
# There are 3 primary build outputs:
# 1) $(KERNEL_FILE_NAME).unstripped (raw linked kernel, unstripped)
# 2) $(KERNEL_FILE_NAME) (stripped kernel, with optional CTF data)
# 3) $(KERNEL_FILE_NAME).dSYM (dSYM)
#
do_build_all:: do_build_kernel
.PHONY: do_build_kernel
do_build_kernel: $(TARGET)/$(KERNEL_FILE_NAME) $(TARGET)/$(KERNEL_FILE_NAME).unstripped
@:
ifeq ($(BUILD_DSYM),1)
do_build_all:: do_build_kernel_dSYM
endif
.PHONY: do_build_kernel_dSYM
do_build_kernel_dSYM: $(TARGET)/$(KERNEL_FILE_NAME).dSYM
@:
.LDFLAGS: ALWAYS
$(_v)$(REPLACECONTENTS) $@ $(LD) $(LDFLAGS_KERNEL) $(LD_KERNEL_LIBS)
.CFLAGS: ALWAYS
$(_v)$(REPLACECONTENTS) $@ $(KCC) $(CFLAGS) $(INCFLAGS)
$(TARGET)/$(KERNEL_FILE_NAME): $(TARGET)/$(KERNEL_FILE_NAME).unstripped
@echo STRIP $(@F)
$(_v)$(STRIP) $(STRIP_FLAGS) $< -o $@
$(_v)$(RM) $@.ctfdata
ifeq ($(DO_CTFMERGE),1)
@echo CTFMERGE $(@F)
$(_v)$(FIND) $(TARGET)/ -name \*.ctf -size +0 | \
$(XARGS) $(CTFMERGE) -l xnu -o $@ -Z $@.ctfdata || true
endif
$(_v)if [ -s $@.ctfdata ]; then \
echo CTFINSERT $(@F); \
$(CTFINSERT) $@ $(ARCH_FLAGS_$(CURRENT_ARCH_CONFIG)) \
$@.ctfdata -o $@; \
fi;
$(_v)$(LN) $(call function_convert_build_config_to_objdir,$(CURRENT_BUILD_CONFIG))/$(KERNEL_FILE_NAME) $(OBJROOT)/$(KERNEL_FILE_NAME)
$(TARGET)/$(KERNEL_FILE_NAME).dSYM: $(TARGET)/$(KERNEL_FILE_NAME).unstripped
$(_v)echo DSYMUTIL $(@F)
$(_v)$(DSYMUTIL) $(DSYMUTIL_FLAGS) $< -o $@
$(_v)$(MV) $@/$(DSYMDWARFDIR)/$(KERNEL_FILE_NAME).unstripped $@/$(DSYMDWARFDIR)/$(KERNEL_FILE_NAME)
$(_v)$(TOUCH) $@
$(TARGET)/$(KERNEL_FILE_NAME).unstripped: $(addprefix $(TARGET)/,$(foreach component,$(COMPONENT_LIST),$(component)/$(CURRENT_KERNEL_CONFIG)/$(component).filelist)) lastkernelconstructor.o $(SRCROOT)/config/version.c $(SRCROOT)/config/MasterVersion .LDFLAGS $(filter %/MakeInc.kernel,$(MAKEFILE_LIST))
$(_v)${MAKE} -f $(firstword $(MAKEFILE_LIST)) version.o
@echo LD $(@F)
$(_v)$(CAT) $(filter %.filelist,$+) < /dev/null > link.filelist
$(_v)$(LD) $(LDFLAGS_KERNEL) -filelist link.filelist version.o $(filter %.o,$+) -o $@ $(LD_KERNEL_LIBS)
-include version.d
version.o: .CFLAGS $(filter %/MakeInc.kernel,$(MAKEFILE_LIST))
version.o: $(OBJPATH)/version.c
${C_RULE_0}
${C_RULE_1A}$<
${C_RULE_2}
${C_RULE_4}
# Always recreate version.sh
$(OBJPATH)/version.c: $(SRCROOT)/config/version.c $(NEWVERS) $(SRCROOT)/config/MasterVersion ALWAYS
$(_v)$(CP) $< $@
$(_v)$(NEWVERS) $(OBJPATH)/version.c > /dev/null;
-include lastkernelconstructor.d
lastkernelconstructor.o: .CFLAGS $(filter %/MakeInc.kernel,$(MAKEFILE_LIST))
lastkernelconstructor.o: $(SRCROOT)/libsa/lastkernelconstructor.c
${C_RULE_0}
${C_RULE_1A}$< $(CFLAGS_NOLTO_FLAG)
${C_RULE_2}
${C_RULE_3}
${C_RULE_4}
$(_v)$(SEG_HACK) -s __DATA -n __LAST -o $@__ $@
$(_v)$(MV) $@__ $@
#
# Install rules. Each build config is classified as "primary" (the first
# config for an architecture) or "non-primary". Primary build configs
# have the semantic of competing to *combine* single-architecture
# files into a multi-architecture output in the DSTROOT, like
# $(DSTROOT)/$(KERNEL_FILE_NAME), and consequently each primary build config
# has its install target run serially with respect to other primary
# build configs. Non-primary build configs will never compete for
# files in the DSTROOT or SYMROOT, and can be installed in parallel
# with other non-primary configs (and even primary configs)
#
do_build_install_primary:: do_install_machine_specific_kernel
ifeq ($(BUILD_DSYM),1)
do_build_install_primary:: do_install_machine_specific_kernel_dSYM
endif
do_build_install_non_primary:: do_install_machine_specific_kernel
ifeq ($(BUILD_DSYM),1)
do_build_install_non_primary:: do_install_machine_specific_kernel_dSYM
endif
ifeq ($(BUILD_DSYM),1)
ifeq ($(INSTALL_KERNEL_SYM_TO_KDK),1)
do_build_install_primary:: do_install_machine_specific_KDK_dSYM
do_build_install_non_primary:: do_install_machine_specific_KDK_dSYM
endif
endif
ifeq ($(INSTALL_XNU_DEBUG_FILES),1)
do_build_install_primary:: do_install_xnu_debug_files
endif
.PHONY: do_install_xnu_debug_files
do_install_xnu_debug_files: $(DSTROOT)/$(DEVELOPER_EXTRAS_DIR)/README.DEBUG-kernel.txt
@:
#
# If the timestamp indicates the DSTROOT kernel is out of
# date, start over. Normal dependencies don't work because we can have
# ( BUILDA, BUILDB, INSTALLB, INSTALLA ) in which case at INSTALLA time
# the timestamps would $(DSTROOT)/$(KERNEL_FILE_NAME) is not out of date compared
# to BUILDA. So we maintain a separate file at the time make(1)
# was run and use it to determine what actions to take
#
$(DSTROOT)/$(INSTALL_KERNEL_DIR)/$(KERNEL_FILE_NAME): $(TARGET)/$(KERNEL_FILE_NAME) ALWAYS
$(_v)$(MKDIR) $(dir $@)
$(_v)if [ $(OBJROOT)/.mach_kernel.timestamp -nt $@ ]; then \
echo INSTALL $(@F) "($(CURRENT_ARCH_CONFIG_LC) $(CURRENT_MACHINE_CONFIG_LC))"; \
$(INSTALL) $(EXEC_INSTALL_FLAGS) $< $@; \
cmdstatus=$$?; \
else \
echo INSTALL $(@F) "($(CURRENT_ARCH_CONFIG_LC) $(CURRENT_MACHINE_CONFIG_LC))"; \
$(LIPO) -create $@ $< -output $@; \
cmdstatus=$$?; \
fi; \
exit $$cmdstatus
$(SYMROOT)/$(KERNEL_FILE_NAME): $(TARGET)/$(KERNEL_FILE_NAME).unstripped ALWAYS
$(_v)$(MKDIR) $(dir $@)
$(_v)if [ $(OBJROOT)/.mach_kernel.timestamp -nt $@ ]; then \
echo INSTALLSYM $(@F) "($(CURRENT_ARCH_CONFIG_LC))"; \
$(INSTALL) $(EXEC_INSTALL_FLAGS) $< $@; \
cmdstatus=$$?; \
else \
echo INSTALLSYM $(@F) "($(CURRENT_ARCH_CONFIG_LC))"; \
$(LIPO) -create $@ $< -output $@; \
cmdstatus=$$?; \
fi; \
exit $$cmdstatus
$(SYMROOT)/$(KERNEL_FILE_NAME).dSYM/$(DSYMLLDBMACROSDIR)/lldbmacros $(DSTROOT)/$(INSTALL_KERNEL_SYM_DIR)/$(KERNEL_FILE_NAME).dSYM/$(DSYMLLDBMACROSDIR)/lldbmacros: $(TARGET)/$(KERNEL_FILE_NAME).dSYM/$(DSYMLLDBMACROSDIR)/lldbmacros
$(_v)$(MKDIR) $(dir $@)
@echo INSTALLMACROS $(@F) "($(CURRENT_ARCH_CONFIG_LC))"
$(_v)$(CP) -r $< $(dir $@)
$(_v)$(TOUCH) $@
$(SYMROOT)/$(KERNEL_FILE_NAME).dSYM/$(DSYMLLDBMACROSDIR)/$(KERNEL_LLDBBOOTSTRAP_NAME) $(DSTROOT)/$(INSTALL_KERNEL_SYM_DIR)/$(KERNEL_FILE_NAME).dSYM/$(DSYMLLDBMACROSDIR)/$(KERNEL_LLDBBOOTSTRAP_NAME): $(TARGET)/$(KERNEL_FILE_NAME).dSYM/$(DSYMLLDBMACROSDIR)/$(KERNEL_LLDBBOOTSTRAP_NAME)
$(_v)$(MKDIR) $(dir $@)
@echo INSTALLMACROS $(@F) "($(CURRENT_ARCH_CONFIG_LC))"
$(_v)$(INSTALL) $(INSTALL_FLAGS) $< $@
$(DSTROOT)/$(DEVELOPER_EXTRAS_DIR)/README.DEBUG-kernel.txt: $(SRCROOT)/config/README.DEBUG-kernel.txt
$(_v)$(MKDIR) $(dir $@)
@echo INSTALL $(@F)
$(_v)$(INSTALL) $(INSTALL_FLAGS) $< $@
$(SYMROOT)/$(KERNEL_FILE_NAME).dSYM/$(DSYMINFODIR)/Info.plist $(DSTROOT)/$(INSTALL_KERNEL_SYM_DIR)/$(KERNEL_FILE_NAME).dSYM/$(DSYMINFODIR)/Info.plist: $(TARGET)/$(KERNEL_FILE_NAME).dSYM/$(DSYMINFODIR)/Info.plist
$(_v)$(MKDIR) $(dir $@)
@echo INSTALLSYM dSYM $(@F) "($(CURRENT_ARCH_CONFIG_LC))"
$(_v)$(INSTALL) $(INSTALL_FLAGS) $< $@
$(SYMROOT)/$(KERNEL_FILE_NAME).dSYM/$(DSYMDWARFDIR)/$(KERNEL_FILE_NAME) $(DSTROOT)/$(INSTALL_KERNEL_SYM_DIR)/$(KERNEL_FILE_NAME).dSYM/$(DSYMDWARFDIR)/$(KERNEL_FILE_NAME): $(TARGET)/$(KERNEL_FILE_NAME).dSYM/$(DSYMDWARFDIR)/$(KERNEL_FILE_NAME) ALWAYS
$(_v)$(MKDIR) $(dir $@)
$(_v)if [ $(OBJROOT)/.mach_kernel.timestamp -nt $@ ]; then \
echo INSTALLSYM dSYM $(@F).dSYM "($(CURRENT_ARCH_CONFIG_LC))"; \
$(INSTALL) $(EXEC_INSTALL_FLAGS) $< $@; \
cmdstatus=$$?; \
else \
echo INSTALLSYM dSYM $(@F).dSYM "($(CURRENT_ARCH_CONFIG_LC))"; \
$(LIPO) -create $@ $< -output $@; \
cmdstatus=$$?; \
fi; \
exit $$cmdstatus
.PHONY: do_install_machine_specific_kernel do_install_machine_specific_kernel_dSYM
do_install_machine_specific_kernel: $(DSTROOT)/$(INSTALL_KERNEL_DIR)/$(KERNEL_FILE_NAME) \
$(SYMROOT)/$(KERNEL_FILE_NAME)
@:
do_install_machine_specific_kernel_dSYM: \
$(SYMROOT)/$(KERNEL_FILE_NAME).dSYM/$(DSYMINFODIR)/Info.plist \
$(SYMROOT)/$(KERNEL_FILE_NAME).dSYM/$(DSYMLLDBMACROSDIR)/lldbmacros \
$(SYMROOT)/$(KERNEL_FILE_NAME).dSYM/$(DSYMLLDBMACROSDIR)/$(KERNEL_LLDBBOOTSTRAP_NAME) \
$(SYMROOT)/$(KERNEL_FILE_NAME).dSYM/$(DSYMDWARFDIR)/$(KERNEL_FILE_NAME)
@:
.PHONY: do_install_machine_specific_KDK_dSYM
do_install_machine_specific_KDK_dSYM: \
$(DSTROOT)/$(INSTALL_KERNEL_SYM_DIR)/$(KERNEL_FILE_NAME).dSYM/$(DSYMINFODIR)/Info.plist \
$(DSTROOT)/$(INSTALL_KERNEL_SYM_DIR)/$(KERNEL_FILE_NAME).dSYM/$(DSYMLLDBMACROSDIR)/lldbmacros \
$(DSTROOT)/$(INSTALL_KERNEL_SYM_DIR)/$(KERNEL_FILE_NAME).dSYM/$(DSYMLLDBMACROSDIR)/$(KERNEL_LLDBBOOTSTRAP_NAME) \
$(DSTROOT)/$(INSTALL_KERNEL_SYM_DIR)/$(KERNEL_FILE_NAME).dSYM/$(DSYMDWARFDIR)/$(KERNEL_FILE_NAME)
@:
# The $(RM) is needed so that the $(LN) doesn't dereference an existing
# symlink during incremental builds and create a new symlink inside
# the target of the existing symlink
do_installhdrs_mi:: $(DSTROOT)/$(KRESDIR)/Info.plist
$(_v)$(MKDIR) $(DSTROOT)/$(KINCFRAME)
$(_v)$(MKDIR) $(DSTROOT)/$(KPINCDIR)
$(_v)$(MKDIR) $(DSTROOT)/$(KRESDIR)
$(_v)$(RM) $(DSTROOT)/$(KINCFRAME)/Versions/Current
$(_v)$(LN) $(KINCVERS) $(DSTROOT)/$(KINCFRAME)/Versions/Current
$(_v)$(RM) $(DSTROOT)/$(KINCFRAME)/Headers
$(_v)$(LN) Versions/Current/Headers \
$(DSTROOT)/$(KINCFRAME)/Headers
$(_v)$(RM) $(DSTROOT)/$(KINCFRAME)/PrivateHeaders
$(_v)$(LN) Versions/Current/PrivateHeaders \
$(DSTROOT)/$(KINCFRAME)/PrivateHeaders
$(_v)$(RM) $(DSTROOT)/$(KINCFRAME)/Resources
$(_v)$(LN) Versions/Current/Resources \
$(DSTROOT)/$(KINCFRAME)/Resources
$(DSTROOT)/$(KRESDIR)/Info.plist: $(SOURCE)/EXTERNAL_HEADERS/Info.plist
$(_v)$(MKDIR) $(DSTROOT)/$(KRESDIR)
$(_v)$(INSTALL) $(DATA_INSTALL_FLAGS) $< $@
$(_v)$(NEWVERS) $@ $(_vstdout)
ifeq ($(USE_BINARY_PLIST),1)
$(_v)$(PLUTIL) -convert binary1 -o $@ $@
endif
print_exports:
$(_v)printenv | sort