/* * Copyright (c) 2004-2007 Apple Inc. All rights reserved. * * @APPLE_OSREFERENCE_LICENSE_HEADER_START@ * * This file contains Original Code and/or Modifications of Original Code * as defined in and that are subject to the Apple Public Source License * Version 2.0 (the 'License'). You may not use this file except in * compliance with the License. The rights granted to you under the License * may not be used to create, or enable the creation or redistribution of, * unlawful or unlicensed copies of an Apple operating system, or to * circumvent, violate, or enable the circumvention or violation of, any * terms of an Apple operating system software license agreement. * * Please obtain a copy of the License at * http://www.opensource.apple.com/apsl/ and read it before using this file. * * The Original Code and all software distributed under the License are * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. * Please see the License for the specific language governing rights and * limitations under the License. * * @APPLE_OSREFERENCE_LICENSE_HEADER_END@ */ /* * NOTICE: This file was modified by SPARTA, Inc. in 2005 to introduce * support for mandatory and extensible security protections. This notice * is included in support of clause 2.2 (b) of the Apple Public License, * Version 2.0. */ /* * Kernel Authorization framework: Management of process/thread credentials * and identity information. */ #include <sys/param.h> /* XXX trim includes */ #include <sys/acct.h> #include <sys/systm.h> #include <sys/ucred.h> #include <sys/proc_internal.h> #include <sys/user.h> #include <sys/timeb.h> #include <sys/times.h> #include <sys/malloc.h> #include <sys/kauth.h> #include <sys/kernel.h> #include <bsm/audit_kernel.h> #include <sys/mount.h> #include <sys/sysproto.h> #include <mach/message.h> #include <mach/host_security.h> #include <libkern/OSAtomic.h> #include <kern/task.h> #include <kern/lock.h> #ifdef MACH_ASSERT # undef MACH_ASSERT #endif #define MACH_ASSERT 1 /* XXX so bogus */ #include <kern/assert.h> #if CONFIG_MACF #include <security/mac.h> #include <security/mac_framework.h> #endif #define CRED_DIAGNOSTIC 0 # define NULLCRED_CHECK(_c) do {if (!IS_VALID_CRED(_c)) panic("%s: bad credential %p", __FUNCTION__,_c);} while(0) /* * Credential debugging; we can track entry into a function that might * change a credential, and we can track actual credential changes that * result. * * Note: Does *NOT* currently include per-thread credential changes */ #if DEBUG_CRED #define DEBUG_CRED_ENTER printf #define DEBUG_CRED_CHANGE printf extern void kauth_cred_print(kauth_cred_t cred); #include <libkern/OSDebug.h> /* needed for get_backtrace( ) */ int is_target_cred( kauth_cred_t the_cred ); void get_backtrace( void ); static int sysctl_dump_creds( __unused struct sysctl_oid *oidp, __unused void *arg1, __unused int arg2, struct sysctl_req *req ); static int sysctl_dump_cred_backtraces( __unused struct sysctl_oid *oidp, __unused void *arg1, __unused int arg2, struct sysctl_req *req ); #define MAX_STACK_DEPTH 8 struct cred_backtrace { int depth; void * stack[ MAX_STACK_DEPTH ]; }; typedef struct cred_backtrace cred_backtrace; #define MAX_CRED_BUFFER_SLOTS 200 struct cred_debug_buffer { int next_slot; cred_backtrace stack_buffer[ MAX_CRED_BUFFER_SLOTS ]; }; typedef struct cred_debug_buffer cred_debug_buffer; cred_debug_buffer * cred_debug_buf_p = NULL; #else /* !DEBUG_CRED */ #define DEBUG_CRED_ENTER(fmt, ...) do {} while (0) #define DEBUG_CRED_CHANGE(fmt, ...) do {} while (0) #endif /* !DEBUG_CRED */ /* * Interface to external identity resolver. * * The architecture of the interface is simple; the external resolver calls * in to get work, then calls back with completed work. It also calls us * to let us know that it's (re)started, so that we can resubmit work if it * times out. */ static lck_mtx_t *kauth_resolver_mtx; #define KAUTH_RESOLVER_LOCK() lck_mtx_lock(kauth_resolver_mtx); #define KAUTH_RESOLVER_UNLOCK() lck_mtx_unlock(kauth_resolver_mtx); static volatile pid_t kauth_resolver_identity; static int kauth_resolver_registered; static uint32_t kauth_resolver_sequence; struct kauth_resolver_work { TAILQ_ENTRY(kauth_resolver_work) kr_link; struct kauth_identity_extlookup kr_work; uint32_t kr_seqno; int kr_refs; int kr_flags; #define KAUTH_REQUEST_UNSUBMITTED (1<<0) #define KAUTH_REQUEST_SUBMITTED (1<<1) #define KAUTH_REQUEST_DONE (1<<2) int kr_result; }; TAILQ_HEAD(kauth_resolver_unsubmitted_head, kauth_resolver_work) kauth_resolver_unsubmitted; TAILQ_HEAD(kauth_resolver_submitted_head, kauth_resolver_work) kauth_resolver_submitted; TAILQ_HEAD(kauth_resolver_done_head, kauth_resolver_work) kauth_resolver_done; static int kauth_resolver_submit(struct kauth_identity_extlookup *lkp); static int kauth_resolver_complete(user_addr_t message); static int kauth_resolver_getwork(user_addr_t message); static int kauth_resolver_getwork2(user_addr_t message); static const int kauth_cred_primes[KAUTH_CRED_PRIMES_COUNT] = KAUTH_CRED_PRIMES; static int kauth_cred_primes_index = 0; static int kauth_cred_table_size = 0; TAILQ_HEAD(kauth_cred_entry_head, ucred); static struct kauth_cred_entry_head * kauth_cred_table_anchor = NULL; #define KAUTH_CRED_HASH_DEBUG 0 static int kauth_cred_add(kauth_cred_t new_cred); static void kauth_cred_remove(kauth_cred_t cred); static inline u_long kauth_cred_hash(const uint8_t *datap, int data_len, u_long start_key); static u_long kauth_cred_get_hashkey(kauth_cred_t cred); static kauth_cred_t kauth_cred_update(kauth_cred_t old_cred, kauth_cred_t new_cred, boolean_t retain_auditinfo); static void kauth_cred_unref_hashlocked(kauth_cred_t *credp); #if KAUTH_CRED_HASH_DEBUG static int kauth_cred_count = 0; static void kauth_cred_hash_print(void); static void kauth_cred_print(kauth_cred_t cred); #endif /* * kauth_resolver_init * * Description: Initialize the daemon side of the credential identity resolver * * Parameters: (void) * * Returns: (void) * * Notes: Intialize the credential identity resolver for use; the * credential identity resolver is the KPI used by the user * space credential identity resolver daemon to communicate * with the kernel via the identitysvc() system call.. * * This is how membership in more than 16 groups (1 effective * and 15 supplementary) is supported, and also how UID's, * UUID's, and so on, are translated to/from POSIX credential * values. * * The credential identity resolver operates by attempting to * determine identity first from the credential, then from * the kernel credential identity cache, and finally by * enqueueing a request to a user space daemon. * * This function is called from kauth_init() in the file * kern_authorization.c. */ void kauth_resolver_init(void) { TAILQ_INIT(&kauth_resolver_unsubmitted); TAILQ_INIT(&kauth_resolver_submitted); TAILQ_INIT(&kauth_resolver_done); kauth_resolver_sequence = 31337; kauth_resolver_mtx = lck_mtx_alloc_init(kauth_lck_grp, 0/*LCK_ATTR_NULL*/); } /* * kauth_resolver_submit * * Description: Submit an external credential identity resolution request to * the user space daemon. * * Parameters: lkp A pointer to an external * lookup request * * Returns: 0 Success * EWOULDBLOCK No resolver registered * EINTR Operation interrupted (e.g. by * a signal) * ENOMEM Could not allocate work item * ??? An error from the user space * daemon * * Notes: Allocate a work queue entry, submit the work and wait for * the operation to either complete or time out. Outstanding * operations may also be cancelled. */ static int kauth_resolver_submit(struct kauth_identity_extlookup *lkp) { struct kauth_resolver_work *workp, *killp; struct timespec ts; int error, shouldfree; /* no point actually blocking if the resolver isn't up yet */ if (kauth_resolver_identity == 0) { /* * We've already waited an initial 30 seconds with no result. * Sleep on a stack address so no one wakes us before timeout; * we sleep a half a second in case we are a high priority * process, so that memberd doesn't starve while we are in a * tight loop between user and kernel, eating all the CPU. */ error = tsleep(&ts, PZERO | PCATCH, "kr_submit", hz/2); if (kauth_resolver_identity == 0) { /* * if things haven't changed while we were asleep, * tell the caller we couldn't get an authoritative * answer. */ return(EWOULDBLOCK); } } MALLOC(workp, struct kauth_resolver_work *, sizeof(*workp), M_KAUTH, M_WAITOK); if (workp == NULL) return(ENOMEM); workp->kr_work = *lkp; workp->kr_refs = 1; workp->kr_flags = KAUTH_REQUEST_UNSUBMITTED; workp->kr_result = 0; /* * We insert the request onto the unsubmitted queue, the call in from * the resolver will it to the submitted thread when appropriate. */ KAUTH_RESOLVER_LOCK(); workp->kr_seqno = workp->kr_work.el_seqno = kauth_resolver_sequence++; workp->kr_work.el_result = KAUTH_EXTLOOKUP_INPROG; /* * XXX As an optimisation, we could check the queue for identical * XXX items and coalesce them */ TAILQ_INSERT_TAIL(&kauth_resolver_unsubmitted, workp, kr_link); wakeup_one((caddr_t)&kauth_resolver_unsubmitted); for (;;) { /* we could compute a better timeout here */ ts.tv_sec = 30; ts.tv_nsec = 0; error = msleep(workp, kauth_resolver_mtx, PCATCH, "kr_submit", &ts); /* request has been completed? */ if ((error == 0) && (workp->kr_flags & KAUTH_REQUEST_DONE)) break; /* woken because the resolver has died? */ if (kauth_resolver_identity == 0) { error = EIO; break; } /* an error? */ if (error != 0) break; } /* if the request was processed, copy the result */ if (error == 0) *lkp = workp->kr_work; /* * If the request timed out and was never collected, the resolver * is dead and probably not coming back anytime soon. In this * case we revert to no-resolver behaviour, and punt all the other * sleeping requests to clear the backlog. */ if ((error == EWOULDBLOCK) && (workp->kr_flags & KAUTH_REQUEST_UNSUBMITTED)) { KAUTH_DEBUG("RESOLVER - request timed out without being collected for processing, resolver dead"); kauth_resolver_identity = 0; /* kill all the other requestes that are waiting as well */ TAILQ_FOREACH(killp, &kauth_resolver_submitted, kr_link) wakeup(killp); TAILQ_FOREACH(killp, &kauth_resolver_unsubmitted, kr_link) wakeup(killp); } /* * drop our reference on the work item, and note whether we should * free it or not */ if (--workp->kr_refs <= 0) { /* work out which list we have to remove it from */ if (workp->kr_flags & KAUTH_REQUEST_DONE) { TAILQ_REMOVE(&kauth_resolver_done, workp, kr_link); } else if (workp->kr_flags & KAUTH_REQUEST_SUBMITTED) { TAILQ_REMOVE(&kauth_resolver_submitted, workp, kr_link); } else if (workp->kr_flags & KAUTH_REQUEST_UNSUBMITTED) { TAILQ_REMOVE(&kauth_resolver_unsubmitted, workp, kr_link); } else { KAUTH_DEBUG("RESOLVER - completed request has no valid queue"); } shouldfree = 1; } else { /* someone else still has a reference on this request */ shouldfree = 0; } /* collect request result */ if (error == 0) error = workp->kr_result; KAUTH_RESOLVER_UNLOCK(); /* * If we dropped the last reference, free the request. */ if (shouldfree) FREE(workp, M_KAUTH); KAUTH_DEBUG("RESOLVER - returning %d", error); return(error); } /* * identitysvc * * Description: System call interface for the external identity resolver. * * Parameters: uap->message Message from daemon to kernel * * Returns: 0 Successfully became resolver * EPERM Not the resolver process * kauth_authorize_generic:EPERM Not root user * kauth_resolver_complete:EIO * kauth_resolver_complete:EFAULT * kauth_resolver_getwork:EINTR * kauth_resolver_getwork:EFAULT * * Notes: This system call blocks until there is work enqueued, at * which time the kernel wakes it up, and a message from the * kernel is copied out to the identity resolution daemon, which * proceed to attempt to resolve it. When the resolution has * completed (successfully or not), the daemon called back into * this system call to give the result to the kernel, and wait * for the next request. */ int identitysvc(__unused struct proc *p, struct identitysvc_args *uap, __unused register_t *retval) { int opcode = uap->opcode; user_addr_t message = uap->message; struct kauth_resolver_work *workp; int error; pid_t new_id; /* * New server registering itself. */ if (opcode == KAUTH_EXTLOOKUP_REGISTER) { new_id = current_proc()->p_pid; if ((error = kauth_authorize_generic(kauth_cred_get(), KAUTH_GENERIC_ISSUSER)) != 0) { KAUTH_DEBUG("RESOLVER - pid %d refused permission to become identity resolver", new_id); return(error); } KAUTH_RESOLVER_LOCK(); if (kauth_resolver_identity != new_id) { KAUTH_DEBUG("RESOLVER - new resolver %d taking over from old %d", new_id, kauth_resolver_identity); /* * We have a new server, so assume that all the old requests have been lost. */ while ((workp = TAILQ_LAST(&kauth_resolver_submitted, kauth_resolver_submitted_head)) != NULL) { TAILQ_REMOVE(&kauth_resolver_submitted, workp, kr_link); workp->kr_flags &= ~KAUTH_REQUEST_SUBMITTED; workp->kr_flags |= KAUTH_REQUEST_UNSUBMITTED; TAILQ_INSERT_HEAD(&kauth_resolver_unsubmitted, workp, kr_link); } kauth_resolver_identity = new_id; kauth_resolver_registered = 1; wakeup(&kauth_resolver_unsubmitted); } KAUTH_RESOLVER_UNLOCK(); return(0); } /* * Beyond this point, we must be the resolver process. */ if (current_proc()->p_pid != kauth_resolver_identity) { KAUTH_DEBUG("RESOLVER - call from bogus resolver %d\n", current_proc()->p_pid); return(EPERM); } /* * Got a result returning? */ if (opcode & KAUTH_EXTLOOKUP_RESULT) { if ((error = kauth_resolver_complete(message)) != 0) return(error); } /* * Caller wants to take more work? */ if (opcode & KAUTH_EXTLOOKUP_WORKER) { if ((error = kauth_resolver_getwork(message)) != 0) return(error); } return(0); } /* * kauth_resolver_getwork_continue * * Description: Continuation for kauth_resolver_getwork * * Parameters: result Error code or 0 for the sleep * that got us to this function * * Returns: 0 Success * EINTR Interrupted (e.g. by signal) * kauth_resolver_getwork2:EFAULT * * Notes: See kauth_resolver_getwork(0 and kauth_resolver_getwork2() for * more information. */ static int kauth_resolver_getwork_continue(int result) { thread_t thread; struct uthread *ut; user_addr_t message; if (result) { KAUTH_RESOLVER_UNLOCK(); return(result); } /* * If we lost a race with another thread/memberd restarting, then we * need to go back to sleep to look for more work. If it was memberd * restarting, then the msleep0() will error out here, as our thread * will already be "dead". */ if (TAILQ_FIRST(&kauth_resolver_unsubmitted) == NULL) { int error; error = msleep0(&kauth_resolver_unsubmitted, kauth_resolver_mtx, PCATCH, "GRGetWork", 0, kauth_resolver_getwork_continue); KAUTH_RESOLVER_UNLOCK(); return(error); } thread = current_thread(); ut = get_bsdthread_info(thread); message = ut->uu_kauth.message; return(kauth_resolver_getwork2(message)); } /* * kauth_resolver_getwork2 * * Decription: Common utility function to copy out a identity resolver work * item from the kernel to user space as part of the user space * identity resolver requesting work. * * Parameters: message message to user space * * Returns: 0 Success * EFAULT Bad user space message address * * Notes: This common function exists to permit the use of continuations * in the identity resoultion process. This frees up the stack * while we are waiting for the user space resolver to complete * a request. This is specifically used so that our per thread * cost can be small, and we will therefore be willing to run a * larger number of threads in the user space identity resolver. */ static int kauth_resolver_getwork2(user_addr_t message) { struct kauth_resolver_work *workp; int error; /* * Note: We depend on the caller protecting us from a NULL work item * queue, since we must have the kauth resolver lock on entry to this * function. */ workp = TAILQ_FIRST(&kauth_resolver_unsubmitted); if ((error = copyout(&workp->kr_work, message, sizeof(workp->kr_work))) != 0) { KAUTH_DEBUG("RESOLVER - error submitting work to resolve"); goto out; } TAILQ_REMOVE(&kauth_resolver_unsubmitted, workp, kr_link); workp->kr_flags &= ~KAUTH_REQUEST_UNSUBMITTED; workp->kr_flags |= KAUTH_REQUEST_SUBMITTED; TAILQ_INSERT_TAIL(&kauth_resolver_submitted, workp, kr_link); out: KAUTH_RESOLVER_UNLOCK(); return(error); } /* * kauth_resolver_getwork * * Description: Get a work item from the enqueued requests from the kernel and * give it to the user space daemon. * * Parameters: message message to user space * * Returns: 0 Success * EINTR Interrupted (e.g. by signal) * kauth_resolver_getwork2:EFAULT * * Notes: This function blocks in a continuation if there are no work * items available for processing at the time the user space * identity resolution daemon makes a request for work. This * permits a large number of threads to be used by the daemon, * without using a lot of wired kernel memory when there are no * acctual request outstanding. */ static int kauth_resolver_getwork(user_addr_t message) { struct kauth_resolver_work *workp; int error; KAUTH_RESOLVER_LOCK(); error = 0; while ((workp = TAILQ_FIRST(&kauth_resolver_unsubmitted)) == NULL) { thread_t thread = current_thread(); struct uthread *ut = get_bsdthread_info(thread); ut->uu_kauth.message = message; error = msleep0(&kauth_resolver_unsubmitted, kauth_resolver_mtx, PCATCH, "GRGetWork", 0, kauth_resolver_getwork_continue); KAUTH_RESOLVER_UNLOCK(); return(error); } return kauth_resolver_getwork2(message); } /* * kauth_resolver_complete * * Description: Return a result from userspace. * * Parameters: message message from user space * * Returns: 0 Success * EIO The resolver is dead * copyin:EFAULT Bad message from user space */ static int kauth_resolver_complete(user_addr_t message) { struct kauth_identity_extlookup extl; struct kauth_resolver_work *workp; int error, result; if ((error = copyin(message, &extl, sizeof(extl))) != 0) { KAUTH_DEBUG("RESOLVER - error getting completed work\n"); return(error); } KAUTH_RESOLVER_LOCK(); error = 0; result = 0; switch (extl.el_result) { case KAUTH_EXTLOOKUP_INPROG: { static int once = 0; /* XXX this should go away once memberd is updated */ if (!once) { printf("kauth_resolver: memberd is not setting valid result codes (assuming always successful)\n"); once = 1; } } /* FALLTHROUGH */ case KAUTH_EXTLOOKUP_SUCCESS: break; case KAUTH_EXTLOOKUP_FATAL: /* fatal error means the resolver is dead */ KAUTH_DEBUG("RESOLVER - resolver %d died, waiting for a new one", kauth_resolver_identity); kauth_resolver_identity = 0; /* XXX should we terminate all outstanding requests? */ error = EIO; break; case KAUTH_EXTLOOKUP_BADRQ: KAUTH_DEBUG("RESOLVER - resolver reported invalid request %d", extl.el_seqno); result = EINVAL; break; case KAUTH_EXTLOOKUP_FAILURE: KAUTH_DEBUG("RESOLVER - resolver reported transient failure for request %d", extl.el_seqno); result = EIO; break; default: KAUTH_DEBUG("RESOLVER - resolver returned unexpected status %d", extl.el_result); result = EIO; break; } /* * In the case of a fatal error, we assume that the resolver will restart * quickly and re-collect all of the outstanding requests. Thus, we don't * complete the request which returned the fatal error status. */ if (extl.el_result != KAUTH_EXTLOOKUP_FATAL) { /* scan our list for this request */ TAILQ_FOREACH(workp, &kauth_resolver_submitted, kr_link) { /* found it? */ if (workp->kr_seqno == extl.el_seqno) { /* copy result */ workp->kr_work = extl; /* move onto completed list and wake up requester(s) */ TAILQ_REMOVE(&kauth_resolver_submitted, workp, kr_link); workp->kr_flags &= ~KAUTH_REQUEST_SUBMITTED; workp->kr_flags |= KAUTH_REQUEST_DONE; workp->kr_result = result; TAILQ_INSERT_TAIL(&kauth_resolver_done, workp, kr_link); wakeup(workp); break; } } } /* * Note that it's OK for us not to find anything; if the request has * timed out the work record will be gone. */ KAUTH_RESOLVER_UNLOCK(); return(error); } /* * Identity cache. */ struct kauth_identity { TAILQ_ENTRY(kauth_identity) ki_link; int ki_valid; #define KI_VALID_UID (1<<0) /* UID and GID are mutually exclusive */ #define KI_VALID_GID (1<<1) #define KI_VALID_GUID (1<<2) #define KI_VALID_NTSID (1<<3) uid_t ki_uid; gid_t ki_gid; guid_t ki_guid; ntsid_t ki_ntsid; /* * Expiry times are the earliest time at which we will disregard the cached state and go to * userland. Before then if the valid bit is set, we will return the cached value. If it's * not set, we will not go to userland to resolve, just assume that there is no answer * available. */ time_t ki_guid_expiry; time_t ki_ntsid_expiry; }; static TAILQ_HEAD(kauth_identity_head, kauth_identity) kauth_identities; #define KAUTH_IDENTITY_CACHEMAX 100 /* XXX sizing? */ static int kauth_identity_count; static lck_mtx_t *kauth_identity_mtx; #define KAUTH_IDENTITY_LOCK() lck_mtx_lock(kauth_identity_mtx); #define KAUTH_IDENTITY_UNLOCK() lck_mtx_unlock(kauth_identity_mtx); static struct kauth_identity *kauth_identity_alloc(uid_t uid, gid_t gid, guid_t *guidp, time_t guid_expiry, ntsid_t *ntsidp, time_t ntsid_expiry); static void kauth_identity_register_and_free(struct kauth_identity *kip); static void kauth_identity_updatecache(struct kauth_identity_extlookup *elp, struct kauth_identity *kip); static void kauth_identity_lru(struct kauth_identity *kip); static int kauth_identity_guid_expired(struct kauth_identity *kip); static int kauth_identity_ntsid_expired(struct kauth_identity *kip); static int kauth_identity_find_uid(uid_t uid, struct kauth_identity *kir); static int kauth_identity_find_gid(gid_t gid, struct kauth_identity *kir); static int kauth_identity_find_guid(guid_t *guidp, struct kauth_identity *kir); static int kauth_identity_find_ntsid(ntsid_t *ntsid, struct kauth_identity *kir); /* * kauth_identity_init * * Description: Initialize the kernel side of the credential identity resolver * * Parameters: (void) * * Returns: (void) * * Notes: Intialize the credential identity resolver for use; the * credential identity resolver is the KPI used to communicate * with a user space credential identity resolver daemon. * * This function is called from kauth_init() in the file * kern_authorization.c. */ void kauth_identity_init(void) { TAILQ_INIT(&kauth_identities); kauth_identity_mtx = lck_mtx_alloc_init(kauth_lck_grp, 0/*LCK_ATTR_NULL*/); } /* * kauth_identity_alloc * * Description: Allocate and fill out a kauth_identity structure for * translation between {UID|GID}/GUID/NTSID * * Parameters: uid * * Returns: NULL Insufficient memory to satisfy * the request * !NULL A pointer to the applocated * structure, filled in * * Notes: It is illegal to translate between UID and GID; any given UUID * or NTSID can oly refer to an NTSIDE or UUID (respectively), * and *either* a UID *or* a GID, but not both. */ static struct kauth_identity * kauth_identity_alloc(uid_t uid, gid_t gid, guid_t *guidp, time_t guid_expiry, ntsid_t *ntsidp, time_t ntsid_expiry) { struct kauth_identity *kip; /* get and fill in a new identity */ MALLOC(kip, struct kauth_identity *, sizeof(*kip), M_KAUTH, M_WAITOK | M_ZERO); if (kip != NULL) { if (gid != KAUTH_GID_NONE) { kip->ki_gid = gid; kip->ki_valid = KI_VALID_GID; } if (uid != KAUTH_UID_NONE) { if (kip->ki_valid & KI_VALID_GID) panic("can't allocate kauth identity with both uid and gid"); kip->ki_uid = uid; kip->ki_valid = KI_VALID_UID; } if (guidp != NULL) { kip->ki_guid = *guidp; kip->ki_valid |= KI_VALID_GUID; } kip->ki_guid_expiry = guid_expiry; if (ntsidp != NULL) { kip->ki_ntsid = *ntsidp; kip->ki_valid |= KI_VALID_NTSID; } kip->ki_ntsid_expiry = ntsid_expiry; } return(kip); } /* * kauth_identity_register_and_free * * Description: Register an association between identity tokens. The passed * 'kip' is freed by this function. * * Parameters: kip Pointer to kauth_identity * structure to register * * Returns: (void) * * Notes: The memory pointer to by 'kip' is assumed to have been * previously allocated via kauth_identity_alloc(). */ static void kauth_identity_register_and_free(struct kauth_identity *kip) { struct kauth_identity *ip; /* * We search the cache for the UID listed in the incoming association. * If we already have an entry, the new information is merged. */ ip = NULL; KAUTH_IDENTITY_LOCK(); if (kip->ki_valid & KI_VALID_UID) { if (kip->ki_valid & KI_VALID_GID) panic("kauth_identity: can't insert record with both UID and GID as key"); TAILQ_FOREACH(ip, &kauth_identities, ki_link) if ((ip->ki_valid & KI_VALID_UID) && (ip->ki_uid == kip->ki_uid)) break; } else if (kip->ki_valid & KI_VALID_GID) { TAILQ_FOREACH(ip, &kauth_identities, ki_link) if ((ip->ki_valid & KI_VALID_GID) && (ip->ki_gid == kip->ki_gid)) break; } else { panic("kauth_identity: can't insert record without UID or GID as key"); } if (ip != NULL) { /* we already have an entry, merge/overwrite */ if (kip->ki_valid & KI_VALID_GUID) { ip->ki_guid = kip->ki_guid; ip->ki_valid |= KI_VALID_GUID; } ip->ki_guid_expiry = kip->ki_guid_expiry; if (kip->ki_valid & KI_VALID_NTSID) { ip->ki_ntsid = kip->ki_ntsid; ip->ki_valid |= KI_VALID_NTSID; } ip->ki_ntsid_expiry = kip->ki_ntsid_expiry; /* and discard the incoming identity */ FREE(kip, M_KAUTH); ip = NULL; } else { /* don't have any information on this identity, so just add it */ TAILQ_INSERT_HEAD(&kauth_identities, kip, ki_link); if (++kauth_identity_count > KAUTH_IDENTITY_CACHEMAX) { ip = TAILQ_LAST(&kauth_identities, kauth_identity_head); TAILQ_REMOVE(&kauth_identities, ip, ki_link); kauth_identity_count--; } } KAUTH_IDENTITY_UNLOCK(); /* have to drop lock before freeing expired entry */ if (ip != NULL) FREE(ip, M_KAUTH); } /* * kauth_identity_updatecache * * Description: Given a lookup result, add any associations that we don't * currently have. * * Parameters: elp External lookup result from * user space daemon to kernel * rkip pointer to returned kauth * identity, or NULL * * Returns: (void) * * Implicit returns: * *rkip Modified (if non-NULL) */ static void kauth_identity_updatecache(struct kauth_identity_extlookup *elp, struct kauth_identity *rkip) { struct timeval tv; struct kauth_identity *kip; microuptime(&tv); /* user identity? */ if (elp->el_flags & KAUTH_EXTLOOKUP_VALID_UID) { KAUTH_IDENTITY_LOCK(); TAILQ_FOREACH(kip, &kauth_identities, ki_link) { /* matching record */ if ((kip->ki_valid & KI_VALID_UID) && (kip->ki_uid == elp->el_uid)) { if (elp->el_flags & KAUTH_EXTLOOKUP_VALID_UGUID) { kip->ki_guid = elp->el_uguid; kip->ki_valid |= KI_VALID_GUID; } kip->ki_guid_expiry = tv.tv_sec + elp->el_uguid_valid; if (elp->el_flags & KAUTH_EXTLOOKUP_VALID_USID) { kip->ki_ntsid = elp->el_usid; kip->ki_valid |= KI_VALID_NTSID; } kip->ki_ntsid_expiry = tv.tv_sec + elp->el_usid_valid; kauth_identity_lru(kip); if (rkip != NULL) *rkip = *kip; KAUTH_DEBUG("CACHE - refreshed %d is " K_UUID_FMT, kip->ki_uid, K_UUID_ARG(kip->ki_guid)); break; } } KAUTH_IDENTITY_UNLOCK(); /* not found in cache, add new record */ if (kip == NULL) { kip = kauth_identity_alloc(elp->el_uid, KAUTH_GID_NONE, (elp->el_flags & KAUTH_EXTLOOKUP_VALID_UGUID) ? &elp->el_uguid : NULL, tv.tv_sec + elp->el_uguid_valid, (elp->el_flags & KAUTH_EXTLOOKUP_VALID_USID) ? &elp->el_usid : NULL, tv.tv_sec + elp->el_usid_valid); if (kip != NULL) { if (rkip != NULL) *rkip = *kip; KAUTH_DEBUG("CACHE - learned %d is " K_UUID_FMT, kip->ki_uid, K_UUID_ARG(kip->ki_guid)); kauth_identity_register_and_free(kip); } } } /* group identity? */ if (elp->el_flags & KAUTH_EXTLOOKUP_VALID_GID) { KAUTH_IDENTITY_LOCK(); TAILQ_FOREACH(kip, &kauth_identities, ki_link) { /* matching record */ if ((kip->ki_valid & KI_VALID_GID) && (kip->ki_gid == elp->el_gid)) { if (elp->el_flags & KAUTH_EXTLOOKUP_VALID_GGUID) { kip->ki_guid = elp->el_gguid; kip->ki_valid |= KI_VALID_GUID; } kip->ki_guid_expiry = tv.tv_sec + elp->el_gguid_valid; if (elp->el_flags & KAUTH_EXTLOOKUP_VALID_GSID) { kip->ki_ntsid = elp->el_gsid; kip->ki_valid |= KI_VALID_NTSID; } kip->ki_ntsid_expiry = tv.tv_sec + elp->el_gsid_valid; kauth_identity_lru(kip); if (rkip != NULL) *rkip = *kip; KAUTH_DEBUG("CACHE - refreshed %d is " K_UUID_FMT, kip->ki_uid, K_UUID_ARG(kip->ki_guid)); break; } } KAUTH_IDENTITY_UNLOCK(); /* not found in cache, add new record */ if (kip == NULL) { kip = kauth_identity_alloc(KAUTH_UID_NONE, elp->el_gid, (elp->el_flags & KAUTH_EXTLOOKUP_VALID_GGUID) ? &elp->el_gguid : NULL, tv.tv_sec + elp->el_gguid_valid, (elp->el_flags & KAUTH_EXTLOOKUP_VALID_GSID) ? &elp->el_gsid : NULL, tv.tv_sec + elp->el_gsid_valid); if (kip != NULL) { if (rkip != NULL) *rkip = *kip; KAUTH_DEBUG("CACHE - learned %d is " K_UUID_FMT, kip->ki_uid, K_UUID_ARG(kip->ki_guid)); kauth_identity_register_and_free(kip); } } } } /* * kauth_identity_lru * * Description: Promote the entry to the head of the LRU, assumes the cache * is locked. * * Parameters: kip kauth identity to move to the * head of the LRU list, if it's * not already there * * Returns: (void) * * Notes: This is called even if the entry has expired; typically an * expired entry that's been looked up is about to be revalidated, * and having it closer to the head of the LRU means finding it * quickly again when the revalidation comes through. */ static void kauth_identity_lru(struct kauth_identity *kip) { if (kip != TAILQ_FIRST(&kauth_identities)) { TAILQ_REMOVE(&kauth_identities, kip, ki_link); TAILQ_INSERT_HEAD(&kauth_identities, kip, ki_link); } } /* * kauth_identity_guid_expired * * Description: Handle lazy expiration of GUID translations. * * Parameters: kip kauth identity to check for * GUID expiration * * Returns: 1 Expired * 0 Not expired */ static int kauth_identity_guid_expired(struct kauth_identity *kip) { struct timeval tv; microuptime(&tv); KAUTH_DEBUG("CACHE - GUID expires @ %d now %d", kip->ki_guid_expiry, tv.tv_sec); return((kip->ki_guid_expiry <= tv.tv_sec) ? 1 : 0); } /* * kauth_identity_ntsid_expired * * Description: Handle lazy expiration of NTSID translations. * * Parameters: kip kauth identity to check for * NTSID expiration * * Returns: 1 Expired * 0 Not expired */ static int kauth_identity_ntsid_expired(struct kauth_identity *kip) { struct timeval tv; microuptime(&tv); KAUTH_DEBUG("CACHE - NTSID expires @ %d now %d", kip->ki_ntsid_expiry, tv.tv_sec); return((kip->ki_ntsid_expiry <= tv.tv_sec) ? 1 : 0); } /* * kauth_identity_find_uid * * Description: Search for an entry by UID * * Parameters: uid UID to find * kir Pointer to return area * * Returns: 0 Found * ENOENT Not found * * Implicit returns: * *klr Modified, if found */ static int kauth_identity_find_uid(uid_t uid, struct kauth_identity *kir) { struct kauth_identity *kip; KAUTH_IDENTITY_LOCK(); TAILQ_FOREACH(kip, &kauth_identities, ki_link) { if ((kip->ki_valid & KI_VALID_UID) && (uid == kip->ki_uid)) { kauth_identity_lru(kip); /* Copy via structure assignment */ *kir = *kip; break; } } KAUTH_IDENTITY_UNLOCK(); return((kip == NULL) ? ENOENT : 0); } /* * kauth_identity_find_uid * * Description: Search for an entry by GID * * Parameters: gid GID to find * kir Pointer to return area * * Returns: 0 Found * ENOENT Not found * * Implicit returns: * *klr Modified, if found */ static int kauth_identity_find_gid(uid_t gid, struct kauth_identity *kir) { struct kauth_identity *kip; KAUTH_IDENTITY_LOCK(); TAILQ_FOREACH(kip, &kauth_identities, ki_link) { if ((kip->ki_valid & KI_VALID_GID) && (gid == kip->ki_gid)) { kauth_identity_lru(kip); /* Copy via structure assignment */ *kir = *kip; break; } } KAUTH_IDENTITY_UNLOCK(); return((kip == NULL) ? ENOENT : 0); } /* * kauth_identity_find_guid * * Description: Search for an entry by GUID * * Parameters: guidp Pointer to GUID to find * kir Pointer to return area * * Returns: 0 Found * ENOENT Not found * * Implicit returns: * *klr Modified, if found * * Note: The association may be expired, in which case the caller * may elect to call out to userland to revalidate. */ static int kauth_identity_find_guid(guid_t *guidp, struct kauth_identity *kir) { struct kauth_identity *kip; KAUTH_IDENTITY_LOCK(); TAILQ_FOREACH(kip, &kauth_identities, ki_link) { if ((kip->ki_valid & KI_VALID_GUID) && (kauth_guid_equal(guidp, &kip->ki_guid))) { kauth_identity_lru(kip); /* Copy via structure assignment */ *kir = *kip; break; } } KAUTH_IDENTITY_UNLOCK(); return((kip == NULL) ? ENOENT : 0); } /* * kauth_identity_find_ntsid * * Description: Search for an entry by NTSID * * Parameters: ntsid Pointer to NTSID to find * kir Pointer to return area * * Returns: 0 Found * ENOENT Not found * * Implicit returns: * *klr Modified, if found * * Note: The association may be expired, in which case the caller * may elect to call out to userland to revalidate. */ static int kauth_identity_find_ntsid(ntsid_t *ntsid, struct kauth_identity *kir) { struct kauth_identity *kip; KAUTH_IDENTITY_LOCK(); TAILQ_FOREACH(kip, &kauth_identities, ki_link) { if ((kip->ki_valid & KI_VALID_NTSID) && (kauth_ntsid_equal(ntsid, &kip->ki_ntsid))) { kauth_identity_lru(kip); /* Copy via structure assignment */ *kir = *kip; break; } } KAUTH_IDENTITY_UNLOCK(); return((kip == NULL) ? ENOENT : 0); } /* * GUID handling. */ guid_t kauth_null_guid; /* * kauth_guid_equal * * Description: Determine the equality of two GUIDs * * Parameters: guid1 Pointer to first GUID * guid2 Pointer to second GUID * * Returns: 0 If GUIDs are inequal * !0 If GUIDs are equal */ int kauth_guid_equal(guid_t *guid1, guid_t *guid2) { return(bcmp(guid1, guid2, sizeof(*guid1)) == 0); } /* * kauth_wellknown_guid * * Description: Determine if a GUID is a well-known GUID * * Parameters: guid Pointer to GUID to check * * Returns: KAUTH_WKG_NOT Not a wel known GUID * KAUTH_WKG_EVERYBODY "Everybody" * KAUTH_WKG_NOBODY "Nobody" * KAUTH_WKG_OWNER "Other" * KAUTH_WKG_GROUP "Group" */ int kauth_wellknown_guid(guid_t *guid) { static char fingerprint[] = {0xab, 0xcd, 0xef, 0xab, 0xcd, 0xef, 0xab, 0xcd, 0xef, 0xab, 0xcd, 0xef}; int code; /* * All WKGs begin with the same 12 bytes. */ if (bcmp((void *)guid, fingerprint, 12) == 0) { /* * The final 4 bytes are our code (in network byte order). */ code = OSSwapHostToBigInt32(*(u_int32_t *)&guid->g_guid[12]); switch(code) { case 0x0000000c: return(KAUTH_WKG_EVERYBODY); case 0xfffffffe: return(KAUTH_WKG_NOBODY); case 0x0000000a: return(KAUTH_WKG_OWNER); case 0x00000010: return(KAUTH_WKG_GROUP); } } return(KAUTH_WKG_NOT); } /* * kauth_ntsid_equal * * Description: Determine the equality of two NTSIDs (NT Security Identifiers) * * Paramters: sid1 Pointer to first NTSID * sid2 Pointer to second NTSID * * Returns: 0 If GUIDs are inequal * !0 If GUIDs are equal */ int kauth_ntsid_equal(ntsid_t *sid1, ntsid_t *sid2) { /* check sizes for equality, also sanity-check size while we're at it */ if ((KAUTH_NTSID_SIZE(sid1) == KAUTH_NTSID_SIZE(sid2)) && (KAUTH_NTSID_SIZE(sid1) <= sizeof(*sid1)) && bcmp(sid1, sid2, KAUTH_NTSID_SIZE(sid1)) == 0) return(1); return(0); } /* * Identity KPI * * We support four tokens representing identity: * - Credential reference * - UID * - GUID * - NT security identifier * * Of these, the UID is the ubiquitous identifier; cross-referencing should * be done using it. */ static int kauth_cred_cache_lookup(int from, int to, void *src, void *dst); /* * kauth_cred_change_egid * * Description: Set EGID by changing the first element of cr_groups for the * passed credential; if the new EGID exists in the list of * groups already, then rotate the old EGID into its position, * otherwise replace it * * Parameters: cred Pointer to the credential to modify * new_egid The new EGID to set * * Returns: 0 The egid did not displace a member of * the supplementary group list * 1 The egid being set displaced a member * of the supplementary groups list * * Note: Utility function; internal use only because of locking. * * This function operates on the credential passed; the caller * must operate either on a newly allocated credential (one for * which there is no hash cache reference and no externally * visible pointer reference), or a template credential. */ static int kauth_cred_change_egid(kauth_cred_t cred, gid_t new_egid) { int i; int displaced = 1; #if radar_4600026 int is_member; #endif /* radar_4600026 */ gid_t old_egid = cred->cr_groups[0]; /* Ignoring the first entry, scan for a match for the new egid */ for (i = 1; i < cred->cr_ngroups; i++) { /* * If we find a match, swap them so we don't lose overall * group information */ if (cred->cr_groups[i] == new_egid) { cred->cr_groups[i] = old_egid; DEBUG_CRED_CHANGE("kauth_cred_change_egid: unset displaced\n"); displaced = 0; break; } } #if radar_4600026 #error Fix radar 4600026 first!!! /* This is correct for memberd behaviour, but incorrect for POSIX; to address this, we would need to automatically opt-out any SUID/SGID binary, and force it to use initgroups to opt back in. We take the approach of considering it opt'ed out in any group of 16 displacement instead, since it's a much more conservative approach (i.e. less likely to cause things to break). */ /* * If we displaced a member of the supplementary groups list of the * credential, and we have not opted out of memberd, then if memberd * says that the credential is a member of the group, then it has not * actually been displaced. * * NB: This is typically a cold code path. */ if (displaced && !(cred->cr_flags & CRF_NOMEMBERD) && kauth_cred_ismember_gid(cred, new_egid, &is_member) == 0 && is_member) { displaced = 0; DEBUG_CRED_CHANGE("kauth_cred_change_egid: reset displaced\n"); } #endif /* radar_4600026 */ /* set the new EGID into the old spot */ cred->cr_groups[0] = new_egid; return (displaced); } /* * kauth_cred_getuid * * Description: Fetch UID from credential * * Parameters: cred Credential to examine * * Returns: (uid_t) UID associated with credential */ uid_t kauth_cred_getuid(kauth_cred_t cred) { NULLCRED_CHECK(cred); return(cred->cr_uid); } /* * kauth_cred_getgid * * Description: Fetch GID from credential * * Parameters: cred Credential to examine * * Returns: (gid_t) GID associated with credential */ uid_t kauth_cred_getgid(kauth_cred_t cred) { NULLCRED_CHECK(cred); return(cred->cr_gid); } /* * kauth_cred_guid2uid * * Description: Fetch UID from GUID * * Parameters: guidp Pointer to GUID to examine * uidp Pointer to buffer for UID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *uidp Modified, if successful */ int kauth_cred_guid2uid(guid_t *guidp, uid_t *uidp) { return(kauth_cred_cache_lookup(KI_VALID_GUID, KI_VALID_UID, guidp, uidp)); } /* * kauth_cred_guid2gid * * Description: Fetch GID from GUID * * Parameters: guidp Pointer to GUID to examine * gidp Pointer to buffer for GID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *gidp Modified, if successful */ int kauth_cred_guid2gid(guid_t *guidp, gid_t *gidp) { return(kauth_cred_cache_lookup(KI_VALID_GUID, KI_VALID_GID, guidp, gidp)); } /* * kauth_cred_ntsid2uid * * Description: Fetch UID from NTSID * * Parameters: sidp Pointer to NTSID to examine * uidp Pointer to buffer for UID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *uidp Modified, if successful */ int kauth_cred_ntsid2uid(ntsid_t *sidp, uid_t *uidp) { return(kauth_cred_cache_lookup(KI_VALID_NTSID, KI_VALID_UID, sidp, uidp)); } /* * kauth_cred_ntsid2gid * * Description: Fetch GID from NTSID * * Parameters: sidp Pointer to NTSID to examine * gidp Pointer to buffer for GID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *gidp Modified, if successful */ int kauth_cred_ntsid2gid(ntsid_t *sidp, gid_t *gidp) { return(kauth_cred_cache_lookup(KI_VALID_NTSID, KI_VALID_GID, sidp, gidp)); } /* * kauth_cred_ntsid2guid * * Description: Fetch GUID from NTSID * * Parameters: sidp Pointer to NTSID to examine * guidp Pointer to buffer for GUID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *guidp Modified, if successful */ int kauth_cred_ntsid2guid(ntsid_t *sidp, guid_t *guidp) { return(kauth_cred_cache_lookup(KI_VALID_NTSID, KI_VALID_GUID, sidp, guidp)); } /* * kauth_cred_uid2guid * * Description: Fetch GUID from UID * * Parameters: uid UID to examine * guidp Pointer to buffer for GUID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *guidp Modified, if successful */ int kauth_cred_uid2guid(uid_t uid, guid_t *guidp) { return(kauth_cred_cache_lookup(KI_VALID_UID, KI_VALID_GUID, &uid, guidp)); } /* * kauth_cred_getguid * * Description: Fetch GUID from credential * * Parameters: cred Credential to examine * guidp Pointer to buffer for GUID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *guidp Modified, if successful */ int kauth_cred_getguid(kauth_cred_t cred, guid_t *guidp) { NULLCRED_CHECK(cred); return(kauth_cred_uid2guid(kauth_cred_getuid(cred), guidp)); } /* * kauth_cred_getguid * * Description: Fetch GUID from GID * * Parameters: gid GID to examine * guidp Pointer to buffer for GUID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *guidp Modified, if successful */ int kauth_cred_gid2guid(gid_t gid, guid_t *guidp) { return(kauth_cred_cache_lookup(KI_VALID_GID, KI_VALID_GUID, &gid, guidp)); } /* * kauth_cred_uid2ntsid * * Description: Fetch NTSID from UID * * Parameters: uid UID to examine * sidp Pointer to buffer for NTSID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *sidp Modified, if successful */ int kauth_cred_uid2ntsid(uid_t uid, ntsid_t *sidp) { return(kauth_cred_cache_lookup(KI_VALID_UID, KI_VALID_NTSID, &uid, sidp)); } /* * kauth_cred_getntsid * * Description: Fetch NTSID from credential * * Parameters: cred Credential to examine * sidp Pointer to buffer for NTSID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *sidp Modified, if successful */ int kauth_cred_getntsid(kauth_cred_t cred, ntsid_t *sidp) { NULLCRED_CHECK(cred); return(kauth_cred_uid2ntsid(kauth_cred_getuid(cred), sidp)); } /* * kauth_cred_gid2ntsid * * Description: Fetch NTSID from GID * * Parameters: gid GID to examine * sidp Pointer to buffer for NTSID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *sidp Modified, if successful */ int kauth_cred_gid2ntsid(gid_t gid, ntsid_t *sidp) { return(kauth_cred_cache_lookup(KI_VALID_GID, KI_VALID_NTSID, &gid, sidp)); } /* * kauth_cred_guid2ntsid * * Description: Fetch NTSID from GUID * * Parameters: guidp Pointer to GUID to examine * sidp Pointer to buffer for NTSID * * Returns: 0 Success * kauth_cred_cache_lookup:EINVAL * * Implicit returns: * *sidp Modified, if successful */ int kauth_cred_guid2ntsid(guid_t *guidp, ntsid_t *sidp) { return(kauth_cred_cache_lookup(KI_VALID_GUID, KI_VALID_NTSID, guidp, sidp)); } /* * kauth_cred_cache_lookup * * Description: Lookup a translation in the cache; if one is not found, and * the attempt was not fatal, submit the request to the resolver * instead, and wait for it to complete or be aborted. * * Parameters: from Identity information we have * to Identity information we want * src Pointer to buffer containing * the source identity * dst Pointer to buffer to receive * the target identity * * Returns: 0 Success * EINVAL Unknown source identity type */ static int kauth_cred_cache_lookup(int from, int to, void *src, void *dst) { struct kauth_identity ki; struct kauth_identity_extlookup el; int error; int (* expired)(struct kauth_identity *kip); KAUTH_DEBUG("CACHE - translate %d to %d", from, to); /* * Look for an existing cache entry for this association. * If the entry has not expired, return the cached information. */ ki.ki_valid = 0; switch(from) { case KI_VALID_UID: error = kauth_identity_find_uid(*(uid_t *)src, &ki); break; case KI_VALID_GID: error = kauth_identity_find_gid(*(gid_t *)src, &ki); break; case KI_VALID_GUID: error = kauth_identity_find_guid((guid_t *)src, &ki); break; case KI_VALID_NTSID: error = kauth_identity_find_ntsid((ntsid_t *)src, &ki); break; default: return(EINVAL); } /* lookup failure or error */ if (error != 0) { /* any other error is fatal */ if (error != ENOENT) { /* XXX bogus check - this is not possible */ KAUTH_DEBUG("CACHE - cache search error %d", error); return(error); } } else { /* do we have a translation? */ if (ki.ki_valid & to) { /* found a valid cached entry, check expiry */ switch(to) { case KI_VALID_GUID: expired = kauth_identity_guid_expired; break; case KI_VALID_NTSID: expired = kauth_identity_ntsid_expired; break; default: switch(from) { case KI_VALID_GUID: expired = kauth_identity_guid_expired; break; case KI_VALID_NTSID: expired = kauth_identity_ntsid_expired; break; default: expired = NULL; } } KAUTH_DEBUG("CACHE - found matching entry with valid %d", ki.ki_valid); /* * If no expiry function, or not expired, we have found * a hit. */ if (!expired) { KAUTH_DEBUG("CACHE - no expiry function"); goto found; } if (!expired(&ki)) { KAUTH_DEBUG("CACHE - entry valid, unexpired"); goto found; } /* * We leave ki_valid set here; it contains a * translation but the TTL has expired. If we can't * get a result from the resolver, we will use it as * a better-than nothing alternative. */ KAUTH_DEBUG("CACHE - expired entry found"); } } /* * We failed to find a cache entry; call the resolver. * * Note: We ask for as much data as we can get. */ switch(from) { case KI_VALID_UID: el.el_flags = KAUTH_EXTLOOKUP_VALID_UID; el.el_uid = *(uid_t *)src; break; case KI_VALID_GID: el.el_flags = KAUTH_EXTLOOKUP_VALID_GID; el.el_gid = *(gid_t *)src; break; case KI_VALID_GUID: el.el_flags = KAUTH_EXTLOOKUP_VALID_UGUID | KAUTH_EXTLOOKUP_VALID_GGUID; el.el_uguid = *(guid_t *)src; el.el_gguid = *(guid_t *)src; break; case KI_VALID_NTSID: el.el_flags = KAUTH_EXTLOOKUP_VALID_USID | KAUTH_EXTLOOKUP_VALID_GSID; el.el_usid = *(ntsid_t *)src; el.el_gsid = *(ntsid_t *)src; break; default: return(EINVAL); } /* * Here we ask for everything all at once, to avoid having to work * out what we really want now, or might want soon. * * Asking for SID translations when we don't know we need them right * now is going to cause excess work to be done if we're connected * to a network that thinks it can translate them. This list needs * to get smaller/smarter. */ el.el_flags |= KAUTH_EXTLOOKUP_WANT_UID | KAUTH_EXTLOOKUP_WANT_GID | KAUTH_EXTLOOKUP_WANT_UGUID | KAUTH_EXTLOOKUP_WANT_GGUID | KAUTH_EXTLOOKUP_WANT_USID | KAUTH_EXTLOOKUP_WANT_GSID; KAUTH_DEBUG("CACHE - calling resolver for %x", el.el_flags); error = kauth_resolver_submit(&el); KAUTH_DEBUG("CACHE - resolver returned %d", error); /* was the lookup successful? */ if (error == 0) { /* * Save the results from the lookup - may have other * information even if we didn't get a guid. */ kauth_identity_updatecache(&el, &ki); } /* * Check to see if we have a valid result. */ if (!error && !(ki.ki_valid & to)) error = ENOENT; if (error) return(error); found: switch(to) { case KI_VALID_UID: *(uid_t *)dst = ki.ki_uid; break; case KI_VALID_GID: *(gid_t *)dst = ki.ki_gid; break; case KI_VALID_GUID: *(guid_t *)dst = ki.ki_guid; break; case KI_VALID_NTSID: *(ntsid_t *)dst = ki.ki_ntsid; break; default: return(EINVAL); } KAUTH_DEBUG("CACHE - returned successfully"); return(0); } /* * Group membership cache. * * XXX the linked-list implementation here needs to be optimized. */ struct kauth_group_membership { TAILQ_ENTRY(kauth_group_membership) gm_link; uid_t gm_uid; /* the identity whose membership we're recording */ gid_t gm_gid; /* group of which they are a member */ time_t gm_expiry; /* TTL for the membership */ int gm_flags; #define KAUTH_GROUP_ISMEMBER (1<<0) }; TAILQ_HEAD(kauth_groups_head, kauth_group_membership) kauth_groups; #define KAUTH_GROUPS_CACHEMAX 100 /* XXX sizing? */ static int kauth_groups_count; static lck_mtx_t *kauth_groups_mtx; #define KAUTH_GROUPS_LOCK() lck_mtx_lock(kauth_groups_mtx); #define KAUTH_GROUPS_UNLOCK() lck_mtx_unlock(kauth_groups_mtx); static int kauth_groups_expired(struct kauth_group_membership *gm); static void kauth_groups_lru(struct kauth_group_membership *gm); static void kauth_groups_updatecache(struct kauth_identity_extlookup *el); /* * kauth_groups_init * * Description: Initialize the groups cache * * Parameters: (void) * * Returns: (void) * * Notes: Intialize the groups cache for use; the group cache is used * to avoid unnecessary calls out to user space. * * This function is called from kauth_init() in the file * kern_authorization.c. */ void kauth_groups_init(void) { TAILQ_INIT(&kauth_groups); kauth_groups_mtx = lck_mtx_alloc_init(kauth_lck_grp, 0/*LCK_ATTR_NULL*/); } /* * kauth_groups_expired * * Description: Handle lazy expiration of group membership cache entries * * Parameters: gm group membership entry to * check for expiration * * Returns: 1 Expired * 0 Not expired */ static int kauth_groups_expired(struct kauth_group_membership *gm) { struct timeval tv; microuptime(&tv); return((gm->gm_expiry <= tv.tv_sec) ? 1 : 0); } /* * kauth_groups_lru * * Description: Promote the entry to the head of the LRU, assumes the cache * is locked. * * Parameters: kip group membership entry to move * to the head of the LRU list, * if it's not already there * * Returns: (void) * * Notes: This is called even if the entry has expired; typically an * expired entry that's been looked up is about to be revalidated, * and having it closer to the head of the LRU means finding it * quickly again when the revalidation comes through. */ static void kauth_groups_lru(struct kauth_group_membership *gm) { if (gm != TAILQ_FIRST(&kauth_groups)) { TAILQ_REMOVE(&kauth_groups, gm, gm_link); TAILQ_INSERT_HEAD(&kauth_groups, gm, gm_link); } } /* * kauth_groups_updatecache * * Description: Given a lookup result, add any group cache associations that * we don't currently have. * * Parameters: elp External lookup result from * user space daemon to kernel * rkip pointer to returned kauth * identity, or NULL * * Returns: (void) */ static void kauth_groups_updatecache(struct kauth_identity_extlookup *el) { struct kauth_group_membership *gm; struct timeval tv; /* need a valid response if we are to cache anything */ if ((el->el_flags & (KAUTH_EXTLOOKUP_VALID_UID | KAUTH_EXTLOOKUP_VALID_GID | KAUTH_EXTLOOKUP_VALID_MEMBERSHIP)) != (KAUTH_EXTLOOKUP_VALID_UID | KAUTH_EXTLOOKUP_VALID_GID | KAUTH_EXTLOOKUP_VALID_MEMBERSHIP)) return; microuptime(&tv); /* * Search for an existing record for this association before inserting * a new one; if we find one, update it instead of creating a new one */ KAUTH_GROUPS_LOCK(); TAILQ_FOREACH(gm, &kauth_groups, gm_link) { if ((el->el_uid == gm->gm_uid) && (el->el_gid == gm->gm_gid)) { if (el->el_flags & KAUTH_EXTLOOKUP_ISMEMBER) { gm->gm_flags |= KAUTH_GROUP_ISMEMBER; } else { gm->gm_flags &= ~KAUTH_GROUP_ISMEMBER; } gm->gm_expiry = el->el_member_valid + tv.tv_sec; kauth_groups_lru(gm); break; } } KAUTH_GROUPS_UNLOCK(); /* if we found an entry to update, stop here */ if (gm != NULL) return; /* allocate a new record */ MALLOC(gm, struct kauth_group_membership *, sizeof(*gm), M_KAUTH, M_WAITOK); if (gm != NULL) { gm->gm_uid = el->el_uid; gm->gm_gid = el->el_gid; if (el->el_flags & KAUTH_EXTLOOKUP_ISMEMBER) { gm->gm_flags |= KAUTH_GROUP_ISMEMBER; } else { gm->gm_flags &= ~KAUTH_GROUP_ISMEMBER; } gm->gm_expiry = el->el_member_valid + tv.tv_sec; } /* * Insert the new entry. Note that it's possible to race ourselves * here and end up with duplicate entries in the list. Wasteful, but * harmless since the first into the list will never be looked up, * and thus will eventually just fall off the end. */ KAUTH_GROUPS_LOCK(); TAILQ_INSERT_HEAD(&kauth_groups, gm, gm_link); if (kauth_groups_count++ > KAUTH_GROUPS_CACHEMAX) { gm = TAILQ_LAST(&kauth_groups, kauth_groups_head); TAILQ_REMOVE(&kauth_groups, gm, gm_link); kauth_groups_count--; } else { gm = NULL; } KAUTH_GROUPS_UNLOCK(); /* free expired cache entry */ if (gm != NULL) FREE(gm, M_KAUTH); } /* * Group membership KPI */ /* * kauth_cred_ismember_gid * * Description: Given a credential and a GID, determine if the GID is a member * of one of the supplementary groups associated with the given * credential * * Parameters: cred Credential to check in * gid GID to check for membership * resultp Pointer to int to contain the * result of the call * * Returns: 0 Success * ENOENT Could not proform lookup * kauth_resolver_submit:EWOULDBLOCK * kauth_resolver_submit:EINTR * kauth_resolver_submit:ENOMEM * kauth_resolver_submit:??? Unlikely error from user space * * Implicit returns: * *resultp (modified) 1 Is member * 0 Is not member * * Notes: This function guarantees not to modify resultp when returning * an error. * * This function effectively checkes the EGID as well, since the * EGID is cr_groups[0] as an implementation detail. */ int kauth_cred_ismember_gid(kauth_cred_t cred, gid_t gid, int *resultp) { struct kauth_group_membership *gm; struct kauth_identity_extlookup el; int i, error; /* * Check the per-credential list of override groups. * * We can conditionalise this on cred->cr_gmuid == KAUTH_UID_NONE since * the cache should be used for that case. */ for (i = 0; i < cred->cr_ngroups; i++) { if (gid == cred->cr_groups[i]) { *resultp = 1; return(0); } } /* * If we don't have a UID for group membership checks, the in-cred list * was authoritative and we can stop here. */ if (cred->cr_gmuid == KAUTH_UID_NONE) { *resultp = 0; return(0); } /* * If the resolver hasn't checked in yet, we are early in the boot * phase and the local group list is complete and authoritative. */ if (!kauth_resolver_registered) { *resultp = 0; return(0); } /* TODO: */ /* XXX check supplementary groups */ /* XXX check whiteout groups */ /* XXX nesting of supplementary/whiteout groups? */ /* * Check the group cache. */ KAUTH_GROUPS_LOCK(); TAILQ_FOREACH(gm, &kauth_groups, gm_link) { if ((gm->gm_uid == cred->cr_gmuid) && (gm->gm_gid == gid) && !kauth_groups_expired(gm)) { kauth_groups_lru(gm); break; } } /* did we find a membership entry? */ if (gm != NULL) *resultp = (gm->gm_flags & KAUTH_GROUP_ISMEMBER) ? 1 : 0; KAUTH_GROUPS_UNLOCK(); /* if we did, we can return now */ if (gm != NULL) return(0); /* nothing in the cache, need to go to userland */ el.el_flags = KAUTH_EXTLOOKUP_VALID_UID | KAUTH_EXTLOOKUP_VALID_GID | KAUTH_EXTLOOKUP_WANT_MEMBERSHIP; el.el_uid = cred->cr_gmuid; el.el_gid = gid; el.el_member_valid = 0; /* XXX set by resolver? */ error = kauth_resolver_submit(&el); if (error != 0) return(error); /* save the results from the lookup */ kauth_groups_updatecache(&el); /* if we successfully ascertained membership, report */ if (el.el_flags & KAUTH_EXTLOOKUP_VALID_MEMBERSHIP) { *resultp = (el.el_flags & KAUTH_EXTLOOKUP_ISMEMBER) ? 1 : 0; return(0); } return(ENOENT); } /* * kauth_cred_ismember_guid * * Description: Determine whether the supplied credential is a member of the * group nominated by GUID. * * Parameters: cred Credential to check in * guidp Pointer to GUID whose group * we are testing for membership * resultp Pointer to int to contain the * result of the call * * Returns: 0 Success * kauth_cred_guid2gid:EINVAL * kauth_cred_ismember_gid:ENOENT * kauth_cred_ismember_gid:EWOULDBLOCK * kauth_cred_ismember_gid:EINTR * kauth_cred_ismember_gid:ENOMEM * kauth_cred_ismember_gid:??? Unlikely error from user space * * Implicit returns: * *resultp (modified) 1 Is member * 0 Is not member */ int kauth_cred_ismember_guid(kauth_cred_t cred, guid_t *guidp, int *resultp) { gid_t gid; int error, wkg; error = 0; wkg = kauth_wellknown_guid(guidp); switch(wkg) { case KAUTH_WKG_NOBODY: *resultp = 0; break; case KAUTH_WKG_EVERYBODY: *resultp = 1; break; default: /* translate guid to gid */ if ((error = kauth_cred_guid2gid(guidp, &gid)) != 0) { /* * If we have no guid -> gid translation, it's not a group and * thus the cred can't be a member. */ if (error == ENOENT) { *resultp = 0; error = 0; } } else { error = kauth_cred_ismember_gid(cred, gid, resultp); } } return(error); } /* * kauth_cred_gid_subset * * Description: Given two credentials, determine if all GIDs associated with * the first are also associated with the second * * Parameters: cred1 Credential to check for * cred2 Credential to check in * resultp Pointer to int to contain the * result of the call * * Returns: 0 Success * non-zero See kauth_cred_ismember_gid for * error codes * * Implicit returns: * *resultp (modified) 1 Is subset * 0 Is not subset * * Notes: This function guarantees not to modify resultp when returning * an error. */ int kauth_cred_gid_subset(kauth_cred_t cred1, kauth_cred_t cred2, int *resultp) { int i, err, res = 1; gid_t gid; /* First, check the local list of groups */ for (i = 0; i < cred1->cr_ngroups; i++) { gid = cred1->cr_groups[i]; if ((err = kauth_cred_ismember_gid(cred2, gid, &res)) != 0) { return err; } if (!res && gid != cred2->cr_rgid && gid != cred2->cr_svgid) { *resultp = 0; return 0; } } /* Check real gid */ if ((err = kauth_cred_ismember_gid(cred2, cred1->cr_rgid, &res)) != 0) { return err; } if (!res && cred1->cr_rgid != cred2->cr_rgid && cred1->cr_rgid != cred2->cr_svgid) { *resultp = 0; return 0; } /* Finally, check saved gid */ if ((err = kauth_cred_ismember_gid(cred2, cred1->cr_svgid, &res)) != 0){ return err; } if (!res && cred1->cr_svgid != cred2->cr_rgid && cred1->cr_svgid != cred2->cr_svgid) { *resultp = 0; return 0; } *resultp = 1; return 0; } /* * kauth_cred_issuser * * Description: Fast replacement for issuser() * * Parameters: cred Credential to check for super * user privileges * * Returns: 0 Not super user * !0 Is super user * * Notes: This function uses a magic number which is not a manifest * constant; this is bad practice. */ int kauth_cred_issuser(kauth_cred_t cred) { return(cred->cr_uid == 0); } /* * Credential KPI */ /* lock protecting credential hash table */ static lck_mtx_t *kauth_cred_hash_mtx; #define KAUTH_CRED_HASH_LOCK() lck_mtx_lock(kauth_cred_hash_mtx); #define KAUTH_CRED_HASH_UNLOCK() lck_mtx_unlock(kauth_cred_hash_mtx); #if KAUTH_CRED_HASH_DEBUG #define KAUTH_CRED_HASH_LOCK_ASSERT() _mutex_assert(kauth_cred_hash_mtx, MA_OWNED) #else /* !KAUTH_CRED_HASH_DEBUG */ #define KAUTH_CRED_HASH_LOCK_ASSERT() #endif /* !KAUTH_CRED_HASH_DEBUG */ /* * kauth_cred_init * * Description: Initialize the credential hash cache * * Parameters: (void) * * Returns: (void) * * Notes: Intialize the credential hash cache for use; the credential * hash cache is used convert duplicate credentials into a * single reference counted credential in order to save wired * kernel memory. In practice, this generally means a desktop * system runs with a few tens of credentials, instead of one * per process, one per thread, one per vnode cache entry, and * so on. This generally results in savings of 200K or more * (potentially much more on server systems). * * The hash cache internally has a reference on the credential * for itself as a means of avoiding a reclaim race for a * credential in the process of having it's last non-hash * reference released. This would otherwise result in the * possibility of a freed credential that was still in uses due * a race. This use is protected by the KAUTH_CRED_HASH_LOCK. * * On final release, the hash reference is droped, and the * credential is freed back to the system. * * This function is called from kauth_init() in the file * kern_authorization.c. */ void kauth_cred_init(void) { int i; kauth_cred_hash_mtx = lck_mtx_alloc_init(kauth_lck_grp, 0/*LCK_ATTR_NULL*/); kauth_cred_table_size = kauth_cred_primes[kauth_cred_primes_index]; /*allocate credential hash table */ MALLOC(kauth_cred_table_anchor, struct kauth_cred_entry_head *, (sizeof(struct kauth_cred_entry_head) * kauth_cred_table_size), M_KAUTH, M_WAITOK | M_ZERO); if (kauth_cred_table_anchor == NULL) panic("startup: kauth_cred_init"); for (i = 0; i < kauth_cred_table_size; i++) { TAILQ_INIT(&kauth_cred_table_anchor[i]); } } /* * kauth_getuid * * Description: Get the current thread's effective UID. * * Parameters: (void) * * Returns: (uid_t) The effective UID of the * current thread */ uid_t kauth_getuid(void) { return(kauth_cred_get()->cr_uid); } /* * kauth_getruid * * Description: Get the current thread's real UID. * * Parameters: (void) * * Returns: (uid_t) The real UID of the current * thread */ uid_t kauth_getruid(void) { return(kauth_cred_get()->cr_ruid); } /* * kauth_getgid * * Description: Get the current thread's effective GID. * * Parameters: (void) * * Returns: (gid_t) The effective GID of the * current thread */ gid_t kauth_getgid(void) { return(kauth_cred_get()->cr_groups[0]); } /* * kauth_getgid * * Description: Get the current thread's real GID. * * Parameters: (void) * * Returns: (gid_t) The real GID of the current * thread */ gid_t kauth_getrgid(void) { return(kauth_cred_get()->cr_rgid); } /* * kauth_cred_get * * Description: Returns a pointer to the current thread's credential * * Parameters: (void) * * Returns: (kauth_cred_t) Pointer to the current thread's * credential * * Notes: This function does not take a reference; because of this, the * caller MUST NOT do anything that would let the thread's * credential change while using the returned value, without * first explicitly taking their own reference. * * If a caller intends to take a reference on the resulting * credential pointer from calling this function, it is strongly * recommended that the caller use kauth_cred_get_with_ref() * instead, to protect against any future changes to the cred * locking protocols; such changes could otherwise potentially * introduce race windows in the callers code. */ kauth_cred_t kauth_cred_get(void) { struct proc *p; struct uthread *uthread; uthread = get_bsdthread_info(current_thread()); /* sanity */ if (uthread == NULL) panic("thread wants credential but has no BSD thread info"); /* * We can lazy-bind credentials to threads, as long as their processes * have them. * * XXX If we later inline this function, the code in this block * XXX should probably be called out in a function. */ if (uthread->uu_ucred == NOCRED) { if ((p = (proc_t) get_bsdtask_info(get_threadtask(current_thread()))) == NULL) panic("thread wants credential but has no BSD process"); uthread->uu_ucred = kauth_cred_proc_ref(p); } return(uthread->uu_ucred); } /* * kauth_cred_uthread_update * * Description: Given a uthread, a proc, and whether or not the proc is locked, * late-bind the uthread cred to the proc cred. * * Parameters: uthread_t The uthread to update * proc_t The process to update to * * Returns: (void) * * Notes: This code is common code called from system call or trap entry * in the case that the process thread may have been changed * since the last time the thread entered the kernel. It is * generally only called with the current uthread and process as * parameters. */ void kauth_cred_uthread_update(uthread_t uthread, proc_t proc) { if (uthread->uu_ucred != proc->p_ucred && (uthread->uu_flag & UT_SETUID) == 0) { kauth_cred_t old = uthread->uu_ucred; uthread->uu_ucred = kauth_cred_proc_ref(proc); if (IS_VALID_CRED(old)) kauth_cred_unref(&old); } } /* * kauth_cred_get_with_ref * * Description: Takes a reference on the current thread's credential, and then * returns a pointer to it to the caller. * * Parameters: (void) * * Returns: (kauth_cred_t) Pointer to the current thread's * newly referenced credential * * Notes: This function takes a reference on the credential before * returning it to the caller. * * It is the responsibility of the calling code to release this * reference when the credential is no longer in use. * * Since the returned reference may be a persistent reference * (e.g. one cached in another data structure with a lifetime * longer than the calling function), this release may be delayed * until such time as the persistent reference is to be destroyed. * An example of this would be the per vnode credential cache used * to accelerate lookup operations. */ kauth_cred_t kauth_cred_get_with_ref(void) { struct proc *procp; struct uthread *uthread; uthread = get_bsdthread_info(current_thread()); /* sanity checks */ if (uthread == NULL) panic("%s - thread wants credential but has no BSD thread info", __FUNCTION__); if ((procp = (proc_t) get_bsdtask_info(get_threadtask(current_thread()))) == NULL) panic("%s - thread wants credential but has no BSD process", __FUNCTION__); /* * We can lazy-bind credentials to threads, as long as their processes * have them. * * XXX If we later inline this function, the code in this block * XXX should probably be called out in a function. */ if (uthread->uu_ucred == NOCRED) { /* take reference for new cred in thread */ uthread->uu_ucred = kauth_cred_proc_ref(procp); } /* take a reference for our caller */ kauth_cred_ref(uthread->uu_ucred); return(uthread->uu_ucred); } /* * kauth_cred_proc_ref * * Description: Takes a reference on the current process's credential, and * then returns a pointer to it to the caller. * * Parameters: procp Process whose credential we * intend to take a reference on * * Returns: (kauth_cred_t) Pointer to the process's * newly referenced credential * * Locks: PROC_LOCK is held before taking the reference and released * after the refeence is taken to protect the p_ucred field of * the process referred to by procp. * * Notes: This function takes a reference on the credential before * returning it to the caller. * * It is the responsibility of the calling code to release this * reference when the credential is no longer in use. * * Since the returned reference may be a persistent reference * (e.g. one cached in another data structure with a lifetime * longer than the calling function), this release may be delayed * until such time as the persistent reference is to be destroyed. * An example of this would be the per vnode credential cache used * to accelerate lookup operations. */ kauth_cred_t kauth_cred_proc_ref(proc_t procp) { kauth_cred_t cred; proc_lock(procp); cred = proc_ucred(procp); kauth_cred_ref(cred); proc_unlock(procp); return(cred); } /* * kauth_cred_alloc * * Description: Allocate a new credential * * Parameters: (void) * * Returns: !NULL Newly allocated credential * NULL Insufficient memory * * Notes: The newly allocated credential is zero'ed as part of the * allocation process, with the exception of the reference * count, which is set to 1 to indicate a single reference * held by the caller. * * Since newly allocated credentials have no external pointers * referencing them, prior to making them visible in an externally * visible pointer (e.g. by adding them to the credential hash * cache) is the only legal time in which an existing credential * can be safely iinitialized or modified directly. * * After initialization, the caller is expected to call the * function kauth_cred_add() to add the credential to the hash * cache, after which time it's frozen and becomes publically * visible. * * The release protocol depends on kauth_hash_add() being called * before kauth_cred_rele() (there is a diagnostic panic which * will trigger if this protocol is not observed). * * XXX: This function really ought to be static, rather than being * exported as KPI, since a failure of kauth_cred_add() can only * be handled by an explicit free of the credential; such frees * depend on knowlegdge of the allocation method used, which is * permitted to change between kernel revisions. * * XXX: In the insufficient resource case, this code panic's rather * than returning a NULL pointer; the code that calls this * function needs to be audited before this can be changed. */ kauth_cred_t kauth_cred_alloc(void) { kauth_cred_t newcred; MALLOC_ZONE(newcred, kauth_cred_t, sizeof(*newcred), M_CRED, M_WAITOK); if (newcred != 0) { bzero(newcred, sizeof(*newcred)); newcred->cr_ref = 1; /* must do this, or cred has same group membership as uid 0 */ newcred->cr_gmuid = KAUTH_UID_NONE; #if CRED_DIAGNOSTIC } else { panic("kauth_cred_alloc: couldn't allocate credential"); #endif } #if KAUTH_CRED_HASH_DEBUG kauth_cred_count++; #endif #if CONFIG_MACF mac_cred_label_init(newcred); #endif return(newcred); } /* * kauth_cred_create * * Description: Look to see if we already have a known credential in the hash * cache; if one is found, bump the reference count and return * it. If there are no credentials that match the given * credential, then allocate a new credential. * * Parameters: cred Template for credential to * be created * * Returns: (kauth_cred_t) The credential that was found * in the hash or created * NULL kauth_cred_add() failed, or * there was not an egid specified * * Notes: The gmuid is hard-defaulted to the UID specified. Since we * maintain this field, we can't expect callers to know how it * needs to be set. Callers should be prepared for this field * to be overwritten. * * XXX: This code will tight-loop if memory for a new credential is * persistently unavailable; this is perhaps not the wisest way * to handle this condition, but current callers do not expect * a failure. */ kauth_cred_t kauth_cred_create(kauth_cred_t cred) { kauth_cred_t found_cred, new_cred = NULL; KAUTH_CRED_HASH_LOCK_ASSERT(); if (cred->cr_flags & CRF_NOMEMBERD) cred->cr_gmuid = KAUTH_UID_NONE; else cred->cr_gmuid = cred->cr_uid; /* Caller *must* specify at least the egid in cr_groups[0] */ if (cred->cr_ngroups < 1) return(NULL); for (;;) { KAUTH_CRED_HASH_LOCK(); found_cred = kauth_cred_find(cred); if (found_cred != NULL) { /* * Found an existing credential so we'll bump * reference count and return */ kauth_cred_ref(found_cred); KAUTH_CRED_HASH_UNLOCK(); return(found_cred); } KAUTH_CRED_HASH_UNLOCK(); /* * No existing credential found. Create one and add it to * our hash table. */ new_cred = kauth_cred_alloc(); if (new_cred != NULL) { int err; new_cred->cr_uid = cred->cr_uid; new_cred->cr_ruid = cred->cr_ruid; new_cred->cr_svuid = cred->cr_svuid; new_cred->cr_rgid = cred->cr_rgid; new_cred->cr_svgid = cred->cr_svgid; new_cred->cr_gmuid = cred->cr_gmuid; new_cred->cr_ngroups = cred->cr_ngroups; bcopy(&cred->cr_groups[0], &new_cred->cr_groups[0], sizeof(new_cred->cr_groups)); new_cred->cr_flags = cred->cr_flags; KAUTH_CRED_HASH_LOCK(); err = kauth_cred_add(new_cred); KAUTH_CRED_HASH_UNLOCK(); /* Retry if kauth_cred_add returns non zero value */ if (err == 0) break; #if CONFIG_MACF mac_cred_label_destroy(new_cred); #endif FREE_ZONE(new_cred, sizeof(*new_cred), M_CRED); new_cred = NULL; } } return(new_cred); } /* * kauth_cred_setresuid * * Description: Update the given credential using the UID arguments. The given * UIDs are used to set the effective UID, real UID, saved UID, * and GMUID (used for group membership checking). * * Parameters: cred The original credential * ruid The new real UID * euid The new effective UID * svuid The new saved UID * gmuid KAUTH_UID_NONE -or- the new * group membership UID * * Returns: (kauth_cred_t) The updated credential * * Note: gmuid is different in that a KAUTH_UID_NONE is a valid * setting, so if you don't want it to change, pass it the * previous value, explicitly. * * IMPORTANT: This function is implemented via kauth_cred_update(), which, * if it returns a credential other than the one it is passed, * will have dropped the reference on the passed credential. All * callers should be aware of this, and treat this function as an * unref + ref, potentially on different credentials. * * Because of this, the caller is expected to take its own * reference on the credential passed as the first parameter, * and be prepared to release the reference on the credential * that is returned to them, if it is not intended to be a * persistent reference. */ kauth_cred_t kauth_cred_setresuid(kauth_cred_t cred, uid_t ruid, uid_t euid, uid_t svuid, uid_t gmuid) { struct ucred temp_cred; NULLCRED_CHECK(cred); /* * We don't need to do anything if the UIDs we are changing are * already the same as the UIDs passed in */ if ((euid == KAUTH_UID_NONE || cred->cr_uid == euid) && (ruid == KAUTH_UID_NONE || cred->cr_ruid == ruid) && (svuid == KAUTH_UID_NONE || cred->cr_svuid == svuid) && (cred->cr_gmuid == gmuid)) { /* no change needed */ return(cred); } /* * Look up in cred hash table to see if we have a matching credential * with the new values; this is done by calling kauth_cred_update(). */ bcopy(cred, &temp_cred, sizeof(temp_cred)); if (euid != KAUTH_UID_NONE) { temp_cred.cr_uid = euid; } if (ruid != KAUTH_UID_NONE) { temp_cred.cr_ruid = ruid; } if (svuid != KAUTH_UID_NONE) { temp_cred.cr_svuid = svuid; } /* * If we are setting the gmuid to KAUTH_UID_NONE, then we want to * opt out of participation in external group resolution, unless we * unless we explicitly opt back in later. */ if ((temp_cred.cr_gmuid = gmuid) == KAUTH_UID_NONE) { temp_cred.cr_flags |= CRF_NOMEMBERD; } return(kauth_cred_update(cred, &temp_cred, TRUE)); } /* * kauth_cred_setresgid * * Description: Update the given credential using the GID arguments. The given * GIDs are used to set the effective GID, real GID, and saved * GID. * * Parameters: cred The original credential * rgid The new real GID * egid The new effective GID * svgid The new saved GID * * Returns: (kauth_cred_t) The updated credential * * IMPORTANT: This function is implemented via kauth_cred_update(), which, * if it returns a credential other than the one it is passed, * will have dropped the reference on the passed credential. All * callers should be aware of this, and treat this function as an * unref + ref, potentially on different credentials. * * Because of this, the caller is expected to take its own * reference on the credential passed as the first parameter, * and be prepared to release the reference on the credential * that is returned to them, if it is not intended to be a * persistent reference. */ kauth_cred_t kauth_cred_setresgid(kauth_cred_t cred, gid_t rgid, gid_t egid, gid_t svgid) { struct ucred temp_cred; NULLCRED_CHECK(cred); DEBUG_CRED_ENTER("kauth_cred_setresgid %p %d %d %d\n", cred, rgid, egid, svgid); /* * We don't need to do anything if the given GID are already the * same as the GIDs in the credential. */ if (cred->cr_groups[0] == egid && cred->cr_rgid == rgid && cred->cr_svgid == svgid) { /* no change needed */ return(cred); } /* * Look up in cred hash table to see if we have a matching credential * with the new values; this is done by calling kauth_cred_update(). */ bcopy(cred, &temp_cred, sizeof(temp_cred)); if (egid != KAUTH_GID_NONE) { /* displacing a supplementary group opts us out of memberd */ if (kauth_cred_change_egid(&temp_cred, egid)) { DEBUG_CRED_CHANGE("displaced!\n"); temp_cred.cr_flags |= CRF_NOMEMBERD; temp_cred.cr_gmuid = KAUTH_UID_NONE; } else { DEBUG_CRED_CHANGE("not displaced\n"); } } if (rgid != KAUTH_GID_NONE) { temp_cred.cr_rgid = rgid; } if (svgid != KAUTH_GID_NONE) { temp_cred.cr_svgid = svgid; } return(kauth_cred_update(cred, &temp_cred, TRUE)); } /* * Update the given credential with the given groups. We only allocate a new * credential when the given gid actually results in changes to the existing * credential. * The gmuid argument supplies a new uid (or KAUTH_UID_NONE to opt out) * which will be used for group membership checking. */ /* * kauth_cred_setgroups * * Description: Update the given credential using the provide supplementary * group list and group membership UID * * Parameters: cred The original credential * groups Pointer to gid_t array which * contains the new group list * groupcount The cound of valid groups which * are contained in 'groups' * gmuid KAUTH_UID_NONE -or- the new * group membership UID * * Returns: (kauth_cred_t) The updated credential * * Note: gmuid is different in that a KAUTH_UID_NONE is a valid * setting, so if you don't want it to change, pass it the * previous value, explicitly. * * IMPORTANT: This function is implemented via kauth_cred_update(), which, * if it returns a credential other than the one it is passed, * will have dropped the reference on the passed credential. All * callers should be aware of this, and treat this function as an * unref + ref, potentially on different credentials. * * Because of this, the caller is expected to take its own * reference on the credential passed as the first parameter, * and be prepared to release the reference on the credential * that is returned to them, if it is not intended to be a * persistent reference. * * XXX: Changes are determined in ordinal order - if the caller pasess * in the same groups list that is already present in the * credential, but the members are in a different order, even if * the EGID is not modified (i.e. cr_groups[0] is the same), it * is considered a modification to the credential, and a new * credential is created. * * This should perhaps be better optimized, but it is considered * to be the caller's problem. */ kauth_cred_t kauth_cred_setgroups(kauth_cred_t cred, gid_t *groups, int groupcount, uid_t gmuid) { int i; struct ucred temp_cred; NULLCRED_CHECK(cred); /* * We don't need to do anything if the given list of groups does not * change. */ if ((cred->cr_gmuid == gmuid) && (cred->cr_ngroups == groupcount)) { for (i = 0; i < groupcount; i++) { if (cred->cr_groups[i] != groups[i]) break; } if (i == groupcount) { /* no change needed */ return(cred); } } /* * Look up in cred hash table to see if we have a matching credential * with new values. If we are setting or clearing the gmuid, then * update the cr_flags, since clearing it is sticky. This permits an * opt-out of memberd processing using setgroups(), and an opt-in * using initgroups(). This is required for POSIX conformance. */ bcopy(cred, &temp_cred, sizeof(temp_cred)); temp_cred.cr_ngroups = groupcount; bcopy(groups, temp_cred.cr_groups, sizeof(temp_cred.cr_groups)); temp_cred.cr_gmuid = gmuid; if (gmuid == KAUTH_UID_NONE) temp_cred.cr_flags |= CRF_NOMEMBERD; else temp_cred.cr_flags &= ~CRF_NOMEMBERD; return(kauth_cred_update(cred, &temp_cred, TRUE)); } /* * kauth_cred_setuidgid * * Description: Update the given credential using the UID and GID arguments. * The given UID is used to set the effective UID, real UID, and * saved UID. The given GID is used to set the effective GID, * real GID, and saved GID. * * Parameters: cred The original credential * uid The new UID to use * gid The new GID to use * * Returns: (kauth_cred_t) The updated credential * * Notes: We set the gmuid to uid if the credential we are inheriting * from has not opted out of memberd participation; otherwise * we set it to KAUTH_UID_NONE * * This code is only ever called from the per-thread credential * code path in the "set per thread credential" case; and in * posix_spawn() in the case that the POSIX_SPAWN_RESETIDS * flag is set. * * IMPORTANT: This function is implemented via kauth_cred_update(), which, * if it returns a credential other than the one it is passed, * will have dropped the reference on the passed credential. All * callers should be aware of this, and treat this function as an * unref + ref, potentially on different credentials. * * Because of this, the caller is expected to take its own * reference on the credential passed as the first parameter, * and be prepared to release the reference on the credential * that is returned to them, if it is not intended to be a * persistent reference. */ kauth_cred_t kauth_cred_setuidgid(kauth_cred_t cred, uid_t uid, gid_t gid) { struct ucred temp_cred; NULLCRED_CHECK(cred); /* * We don't need to do anything if the effective, real and saved * user IDs are already the same as the user ID passed into us. */ if (cred->cr_uid == uid && cred->cr_ruid == uid && cred->cr_svuid == uid && cred->cr_groups[0] == gid && cred->cr_rgid == gid && cred->cr_svgid == gid) { /* no change needed */ return(cred); } /* * Look up in cred hash table to see if we have a matching credential * with the new values. */ bzero(&temp_cred, sizeof(temp_cred)); temp_cred.cr_uid = uid; temp_cred.cr_ruid = uid; temp_cred.cr_svuid = uid; /* inherit the opt-out of memberd */ if (cred->cr_flags & CRF_NOMEMBERD) { temp_cred.cr_gmuid = KAUTH_UID_NONE; temp_cred.cr_flags |= CRF_NOMEMBERD; } else { temp_cred.cr_gmuid = uid; temp_cred.cr_flags &= ~CRF_NOMEMBERD; } temp_cred.cr_ngroups = 1; /* displacing a supplementary group opts us out of memberd */ if (kauth_cred_change_egid(&temp_cred, gid)) { temp_cred.cr_gmuid = KAUTH_UID_NONE; temp_cred.cr_flags |= CRF_NOMEMBERD; } temp_cred.cr_rgid = gid; temp_cred.cr_svgid = gid; #if CONFIG_MACF temp_cred.cr_label = cred->cr_label; #endif return(kauth_cred_update(cred, &temp_cred, TRUE)); } /* * kauth_cred_setsvuidgid * * Description: Function used by execve to set the saved uid and gid values * for suid/sgid programs * * Parameters: cred The credential to update * uid The saved uid to set * gid The saved gid to set * * Returns: (kauth_cred_t) The updated credential * * IMPORTANT: This function is implemented via kauth_cred_update(), which, * if it returns a credential other than the one it is passed, * will have dropped the reference on the passed credential. All * callers should be aware of this, and treat this function as an * unref + ref, potentially on different credentials. * * Because of this, the caller is expected to take its own * reference on the credential passed as the first parameter, * and be prepared to release the reference on the credential * that is returned to them, if it is not intended to be a * persistent reference. */ kauth_cred_t kauth_cred_setsvuidgid(kauth_cred_t cred, uid_t uid, gid_t gid) { struct ucred temp_cred; NULLCRED_CHECK(cred); DEBUG_CRED_ENTER("kauth_cred_setsvuidgid: %p u%d->%d g%d->%d\n", cred, cred->cr_svuid, uid, cred->cr_svgid, gid); /* * We don't need to do anything if the effective, real and saved * uids are already the same as the uid provided. This check is * likely insufficient. */ if (cred->cr_svuid == uid && cred->cr_svgid == gid) { /* no change needed */ return(cred); } DEBUG_CRED_CHANGE("kauth_cred_setsvuidgid: cred change\n"); /* look up in cred hash table to see if we have a matching credential * with new values. */ bcopy(cred, &temp_cred, sizeof(temp_cred)); temp_cred.cr_svuid = uid; temp_cred.cr_svgid = gid; return(kauth_cred_update(cred, &temp_cred, TRUE)); } /* * kauth_cred_setauditinfo * * Description: Update the given credential using the given auditinfo_t. * * Parameters: cred The original credential * auditinfo_p Pointer to ne audit information * * Returns: (kauth_cred_t) The updated credential * * IMPORTANT: This function is implemented via kauth_cred_update(), which, * if it returns a credential other than the one it is passed, * will have dropped the reference on the passed credential. All * callers should be aware of this, and treat this function as an * unref + ref, potentially on different credentials. * * Because of this, the caller is expected to take its own * reference on the credential passed as the first parameter, * and be prepared to release the reference on the credential * that is returned to them, if it is not intended to be a * persistent reference. */ kauth_cred_t kauth_cred_setauditinfo(kauth_cred_t cred, auditinfo_t *auditinfo_p) { struct ucred temp_cred; NULLCRED_CHECK(cred); /* * We don't need to do anything if the audit info is already the * same as the audit info in the credential provided. */ if (bcmp(&cred->cr_au, auditinfo_p, sizeof(cred->cr_au)) == 0) { /* no change needed */ return(cred); } bcopy(cred, &temp_cred, sizeof(temp_cred)); bcopy(auditinfo_p, &temp_cred.cr_au, sizeof(temp_cred.cr_au)); return(kauth_cred_update(cred, &temp_cred, FALSE)); } #if CONFIG_MACF /* * kauth_cred_label_update * * Description: Update the MAC label associated with a credential * * Parameters: cred The original credential * label The MAC label to set * * Returns: (kauth_cred_t) The updated credential * * IMPORTANT: This function is implemented via kauth_cred_update(), which, * if it returns a credential other than the one it is passed, * will have dropped the reference on the passed credential. All * callers should be aware of this, and treat this function as an * unref + ref, potentially on different credentials. * * Because of this, the caller is expected to take its own * reference on the credential passed as the first parameter, * and be prepared to release the reference on the credential * that is returned to them, if it is not intended to be a * persistent reference. */ kauth_cred_t kauth_cred_label_update(kauth_cred_t cred, struct label *label) { kauth_cred_t newcred; struct ucred temp_cred; bcopy(cred, &temp_cred, sizeof(temp_cred)); mac_cred_label_init(&temp_cred); mac_cred_label_associate(cred, &temp_cred); mac_cred_label_update(&temp_cred, label); newcred = kauth_cred_update(cred, &temp_cred, TRUE); mac_cred_label_destroy(&temp_cred); return (newcred); } /* * kauth_cred_label_update_execve * * Description: Update the MAC label associated with a credential as * part of exec * * Parameters: cred The original credential * vp The exec vnode * scriptl The script MAC label * execl The executable MAC label * disjointp Pointer to flag to set if old * and returned credentials are * disjoint * * Returns: (kauth_cred_t) The updated credential * * Implicit returns: * *disjointp Set to 1 for disjoint creds * * IMPORTANT: This function is implemented via kauth_cred_update(), which, * if it returns a credential other than the one it is passed, * will have dropped the reference on the passed credential. All * callers should be aware of this, and treat this function as an * unref + ref, potentially on different credentials. * * Because of this, the caller is expected to take its own * reference on the credential passed as the first parameter, * and be prepared to release the reference on the credential * that is returned to them, if it is not intended to be a * persistent reference. */ static kauth_cred_t kauth_cred_label_update_execve(kauth_cred_t cred, vfs_context_t ctx, struct vnode *vp, struct label *scriptl, struct label *execl, int *disjointp) { kauth_cred_t newcred; struct ucred temp_cred; bcopy(cred, &temp_cred, sizeof(temp_cred)); mac_cred_label_init(&temp_cred); mac_cred_label_associate(cred, &temp_cred); *disjointp = mac_cred_label_update_execve(ctx, &temp_cred, vp, scriptl, execl); newcred = kauth_cred_update(cred, &temp_cred, TRUE); mac_cred_label_destroy(&temp_cred); return (newcred); } /* * kauth_proc_label_update * * Description: Update the label inside the credential associated with the process. * * Parameters: p The process to modify * label The label to place in the process credential * * Notes: The credential associated with the process may change as a result * of this call. The caller should not assume the process reference to * the old credential still exists. */ int kauth_proc_label_update(struct proc *p, struct label *label) { kauth_cred_t my_cred, my_new_cred; my_cred = kauth_cred_proc_ref(p); DEBUG_CRED_ENTER("kauth_proc_label_update: %p\n", my_cred); /* get current credential and take a reference while we muck with it */ for (;;) { /* * Set the credential with new info. If there is no change, * we get back the same credential we passed in; if there is * a change, we drop the reference on the credential we * passed in. The subsequent compare is safe, because it is * a pointer compare rather than a contents compare. */ my_new_cred = kauth_cred_label_update(my_cred, label); if (my_cred != my_new_cred) { DEBUG_CRED_CHANGE("kauth_proc_setlabel_unlocked CH(%d): %p/0x%08x -> %p/0x%08x\n", p->p_pid, my_cred, my_cred->cr_flags, my_new_cred, my_new_cred->cr_flags); proc_lock(p); /* * We need to protect for a race where another thread * also changed the credential after we took our * reference. If p_ucred has changed then we should * restart this again with the new cred. */ if (p->p_ucred != my_cred) { proc_unlock(p); kauth_cred_unref(&my_new_cred); my_cred = kauth_cred_proc_ref(p); /* try again */ continue; } p->p_ucred = my_new_cred; mac_proc_set_enforce(p, MAC_ALL_ENFORCE); proc_unlock(p); } break; } /* Drop old proc reference or our extra reference */ kauth_cred_unref(&my_cred); return (0); } /* * kauth_proc_label_update_execve * * Description: Update the label inside the credential associated with the * process as part of a transitioning execve. The label will * be updated by the policies as part of this processing, not * provided up front. * * Parameters: p The process to modify * ctx The context of the exec * vp The vnode being exec'ed * scriptl The script MAC label * execl The executable MAC label * * Returns: 0 Label update did not make credential * disjoint * 1 Label update caused credential to be * disjoint * * Notes: The credential associated with the process WILL change as a * result of this call. The caller should not assume the process * reference to the old credential still exists. */ int kauth_proc_label_update_execve(struct proc *p, vfs_context_t ctx, struct vnode *vp, struct label *scriptl, struct label *execl) { kauth_cred_t my_cred, my_new_cred; int disjoint = 0; my_cred = kauth_cred_proc_ref(p); DEBUG_CRED_ENTER("kauth_proc_label_update_execve: %p\n", my_cred); /* get current credential and take a reference while we muck with it */ for (;;) { /* * Set the credential with new info. If there is no change, * we get back the same credential we passed in; if there is * a change, we drop the reference on the credential we * passed in. The subsequent compare is safe, because it is * a pointer compare rather than a contents compare. */ my_new_cred = kauth_cred_label_update_execve(my_cred, ctx, vp, scriptl, execl, &disjoint); if (my_cred != my_new_cred) { DEBUG_CRED_CHANGE("kauth_proc_label_update_execve_unlocked CH(%d): %p/0x%08x -> %p/0x%08x\n", p->p_pid, my_cred, my_cred->cr_flags, my_new_cred, my_new_cred->cr_flags); proc_lock(p); /* * We need to protect for a race where another thread * also changed the credential after we took our * reference. If p_ucred has changed then we should * restart this again with the new cred. */ if (p->p_ucred != my_cred) { proc_unlock(p); kauth_cred_unref(&my_new_cred); my_cred = kauth_cred_proc_ref(p); /* try again */ continue; } p->p_ucred = my_new_cred; mac_proc_set_enforce(p, MAC_ALL_ENFORCE); proc_unlock(p); } break; } /* Drop old proc reference or our extra reference */ kauth_cred_unref(&my_cred); return (disjoint); } #if 1 /* * for temporary binary compatibility */ kauth_cred_t kauth_cred_setlabel(kauth_cred_t cred, struct label *label); kauth_cred_t kauth_cred_setlabel(kauth_cred_t cred, struct label *label) { return kauth_cred_label_update(cred, label); } int kauth_proc_setlabel(struct proc *p, struct label *label); int kauth_proc_setlabel(struct proc *p, struct label *label) { return kauth_proc_label_update(p, label); } #endif #else /* this is a temp hack to cover us when MACF is not built in a kernel configuration. * Since we cannot build our export lists based on the kernel configuration we need * to define a stub. */ kauth_cred_t kauth_cred_label_update(__unused kauth_cred_t cred, __unused void *label) { return(NULL); } int kauth_proc_label_update(__unused struct proc *p, __unused void *label) { return (0); } #if 1 /* * for temporary binary compatibility */ kauth_cred_t kauth_cred_setlabel(kauth_cred_t cred, void *label); kauth_cred_t kauth_cred_setlabel(__unused kauth_cred_t cred, __unused void *label) { return NULL; } int kauth_proc_setlabel(struct proc *p, void *label); int kauth_proc_setlabel(__unused struct proc *p, __unused void *label) { return (0); } #endif #endif /* * kauth_cred_ref * * Description: Add a reference to the passed credential * * Parameters: cred The credential to reference * * Returns: (void) * * Notes: This function adds a reference to the provided credential; * the existing reference on the credential is assumed to be * held stable over this operation by taking the appropriate * lock to protect the pointer from which it is being referenced, * if necessary (e.g. the proc lock is held over the call if the * credential being referenced is from p_ucred, the vnode lock * if from the per vnode name cache cred cache, and so on). * * This is safe from the kauth_cred_unref() path, since an atomic * add is used, and the unref path specifically checks to see that * the value has not been changed to add a reference between the * time the credential is unreferenced by another pointer and the * time it is unreferenced from the cred hash cache. */ void kauth_cred_ref(kauth_cred_t cred) { int old_value; NULLCRED_CHECK(cred); // XXX SInt32 not safe for an LP64 kernel old_value = OSAddAtomic(1, (SInt32 *)&cred->cr_ref); if (old_value < 1) panic("kauth_cred_ref: trying to take a reference on a cred with no references"); #if 0 // use this to watch a specific credential if ( is_target_cred( cred ) != 0 ) { get_backtrace( ); } #endif return; } /* * kauth_cred_unref_hashlocked * * Description: release a credential reference; when the last reference is * released, the credential will be freed. * * Parameters: credp Pointer to address containing * credential to be freed * * Returns: (void) * * Implicit returns: * *credp Set to NOCRED * * Notes: This function assumes the credential hash lock is held. * * This function is internal use only, since the hash lock is * scoped to this compilation unit. * * This function destroys the contents of the pointer passed by * the caller to prevent the caller accidently attempting to * release a given reference twice in error. * * The last reference is considered to be released when a release * of a credential of a reference count of 2 occurs; this is an * intended effect, to take into accout the reference held by * the credential hash, which is released at the same time. */ static void kauth_cred_unref_hashlocked(kauth_cred_t *credp) { int old_value; KAUTH_CRED_HASH_LOCK_ASSERT(); NULLCRED_CHECK(*credp); // XXX SInt32 not safe for an LP64 kernel old_value = OSAddAtomic(-1, (SInt32 *)&(*credp)->cr_ref); #if DIAGNOSTIC if (old_value == 0) panic("%s:0x%08x kauth_cred_unref_hashlocked: dropping a reference on a cred with no references", current_proc()->p_comm, *credp); if (old_value == 1) panic("%s:0x%08x kauth_cred_unref_hashlocked: dropping a reference on a cred with no hash entry", current_proc()->p_comm, *credp); #endif #if 0 // use this to watch a specific credential if ( is_target_cred( *credp ) != 0 ) { get_backtrace( ); } #endif /* * If the old_value is 2, then we have just released the last external * reference to this credential */ if (old_value < 3) { /* The last absolute reference is our credential hash table */ kauth_cred_remove(*credp); } *credp = NOCRED; } /* * kauth_cred_unref * * Description: Release a credential reference while holding the credential * hash lock; when the last reference is released, the credential * will be freed. * * Parameters: credp Pointer to address containing * credential to be freed * * Returns: (void) * * Implicit returns: * *credp Set to NOCRED * * Notes: See kauth_cred_unref_hashlocked() for more information. * */ void kauth_cred_unref(kauth_cred_t *credp) { KAUTH_CRED_HASH_LOCK(); kauth_cred_unref_hashlocked(credp); KAUTH_CRED_HASH_UNLOCK(); } /* * kauth_cred_rele * * Description: release a credential reference; when the last reference is * released, the credential will be freed * * Parameters: cred Credential to release * * Returns: (void) * * DEPRECATED: This interface is obsolete due to a failure to clear out the * clear the pointer in the caller to avoid multiple releases of * the same credential. The currently recommended interface is * kauth_cred_unref(). */ void kauth_cred_rele(kauth_cred_t cred) { kauth_cred_unref(&cred); } /* * kauth_cred_dup * * Description: Duplicate a credential via alloc and copy; the new credential * has only it's own * * Parameters: cred The credential to duplicate * * Returns: (kauth_cred_t) The duplicate credential * * Notes: The typical value to calling this routine is if you are going * to modify an existing credential, and expect to need a new one * from the hash cache. * * This should probably not be used in the majority of cases; * if you are using it instead of kauth_cred_create(), you are * likely making a mistake. * * The newly allocated credential is copied as part of the * allocation process, with the exception of the reference * count, which is set to 1 to indicate a single reference * held by the caller. * * Since newly allocated credentials have no external pointers * referencing them, prior to making them visible in an externally * visible pointer (e.g. by adding them to the credential hash * cache) is the only legal time in which an existing credential * can be safely iinitialized or modified directly. * * After initialization, the caller is expected to call the * function kauth_cred_add() to add the credential to the hash * cache, after which time it's frozen and becomes publically * visible. * * The release protocol depends on kauth_hash_add() being called * before kauth_cred_rele() (there is a diagnostic panic which * will trigger if this protocol is not observed). * */ kauth_cred_t kauth_cred_dup(kauth_cred_t cred) { kauth_cred_t newcred; #if CONFIG_MACF struct label *temp_label; #endif #if CRED_DIAGNOSTIC if (cred == NOCRED || cred == FSCRED) panic("kauth_cred_dup: bad credential"); #endif newcred = kauth_cred_alloc(); if (newcred != NULL) { #if CONFIG_MACF temp_label = newcred->cr_label; #endif bcopy(cred, newcred, sizeof(*newcred)); #if CONFIG_MACF newcred->cr_label = temp_label; mac_cred_label_associate(cred, newcred); #endif newcred->cr_ref = 1; } return(newcred); } /* * kauth_cred_copy_real * * Description: Returns a credential based on the passed credential but which * reflects the real rather than effective UID and GID. * * Parameters: cred The credential from which to * derive the new credential * * Returns: (kauth_cred_t) The copied credential * * IMPORTANT: This function DOES NOT utilize kauth_cred_update(); as a * result, the caller is responsible for dropping BOTH the * additional reference on the passed cred (if any), and the * credential returned by this function. The drop should be * via the satnadr kauth_cred_unref() KPI. */ kauth_cred_t kauth_cred_copy_real(kauth_cred_t cred) { kauth_cred_t newcred = NULL, found_cred; struct ucred temp_cred; /* if the credential is already 'real', just take a reference */ if ((cred->cr_ruid == cred->cr_uid) && (cred->cr_rgid == cred->cr_gid)) { kauth_cred_ref(cred); return(cred); } /* * Look up in cred hash table to see if we have a matching credential * with the new values. */ bcopy(cred, &temp_cred, sizeof(temp_cred)); temp_cred.cr_uid = cred->cr_ruid; /* displacing a supplementary group opts us out of memberd */ if (kauth_cred_change_egid(&temp_cred, cred->cr_rgid)) { temp_cred.cr_flags |= CRF_NOMEMBERD; temp_cred.cr_gmuid = KAUTH_UID_NONE; } /* * If the cred is not opted out, make sure we are using the r/euid * for group checks */ if (temp_cred.cr_gmuid != KAUTH_UID_NONE) temp_cred.cr_gmuid = cred->cr_ruid; for (;;) { int err; KAUTH_CRED_HASH_LOCK(); found_cred = kauth_cred_find(&temp_cred); if (found_cred == cred) { /* same cred so just bail */ KAUTH_CRED_HASH_UNLOCK(); return(cred); } if (found_cred != NULL) { /* * Found a match so we bump reference count on new * one. We leave the old one alone. */ kauth_cred_ref(found_cred); KAUTH_CRED_HASH_UNLOCK(); return(found_cred); } /* * Must allocate a new credential, copy in old credential * data and update the real user and group IDs. */ newcred = kauth_cred_dup(&temp_cred); err = kauth_cred_add(newcred); KAUTH_CRED_HASH_UNLOCK(); /* Retry if kauth_cred_add() fails */ if (err == 0) break; #if CONFIG_MACF mac_cred_label_destroy(newcred); #endif FREE_ZONE(newcred, sizeof(*newcred), M_CRED); newcred = NULL; } return(newcred); } /* * kauth_cred_update * * Description: Common code to update a credential * * Parameters: old_cred Reference counted credential * to update * model_cred Non-reference counted model * credential to apply to the * credential to be updated * retain_auditinfo Flag as to whether or not the * audit information should be * copied from the old_cred into * the model_cred * * Returns: (kauth_cred_t) The updated credential * * IMPORTANT: This function will potentially return a credential other than * the one it is passed, and if so, it will have dropped the * reference on the passed credential. All callers should be * aware of this, and treat this function as an unref + ref, * potentially on different credentials. * * Because of this, the caller is expected to take its own * reference on the credential passed as the first parameter, * and be prepared to release the reference on the credential * that is returned to them, if it is not intended to be a * persistent reference. */ static kauth_cred_t kauth_cred_update(kauth_cred_t old_cred, kauth_cred_t model_cred, boolean_t retain_auditinfo) { kauth_cred_t found_cred, new_cred = NULL; /* * Make sure we carry the auditinfo forward to the new credential * unless we are actually updating the auditinfo. */ if (retain_auditinfo) bcopy(&old_cred->cr_au, &model_cred->cr_au, sizeof(model_cred->cr_au)); for (;;) { int err; KAUTH_CRED_HASH_LOCK(); found_cred = kauth_cred_find(model_cred); if (found_cred == old_cred) { /* same cred so just bail */ KAUTH_CRED_HASH_UNLOCK(); return(old_cred); } if (found_cred != NULL) { DEBUG_CRED_CHANGE("kauth_cred_update(cache hit): %p -> %p\n", old_cred, found_cred); /* * Found a match so we bump reference count on new * one and decrement reference count on the old one. */ kauth_cred_ref(found_cred); kauth_cred_unref_hashlocked(&old_cred); KAUTH_CRED_HASH_UNLOCK(); return(found_cred); } /* * Must allocate a new credential using the model. also * adds the new credential to the credential hash table. */ new_cred = kauth_cred_dup(model_cred); err = kauth_cred_add(new_cred); KAUTH_CRED_HASH_UNLOCK(); /* retry if kauth_cred_add returns non zero value */ if (err == 0) break; #if CONFIG_MACF mac_cred_label_destroy(new_cred); #endif FREE_ZONE(new_cred, sizeof(*new_cred), M_CRED); new_cred = NULL; } DEBUG_CRED_CHANGE("kauth_cred_update(cache miss): %p -> %p\n", old_cred, new_cred); kauth_cred_unref(&old_cred); return(new_cred); } /* * kauth_cred_add * * Description: Add the given credential to our credential hash table and * take an additional reference to account for our use of the * credential in the hash table * * Parameters: new_cred Credential to insert into cred * hash cache * * Returns: 0 Success * -1 Hash insertion failed: caller * should retry * * Locks: Caller is expected to hold KAUTH_CRED_HASH_LOCK * * Notes: The 'new_cred' MUST NOT already be in the cred hash cache */ static int kauth_cred_add(kauth_cred_t new_cred) { u_long hash_key; KAUTH_CRED_HASH_LOCK_ASSERT(); hash_key = kauth_cred_get_hashkey(new_cred); hash_key %= kauth_cred_table_size; /* race fix - there is a window where another matching credential * could have been inserted between the time this one was created and we * got the hash lock. If we find a match return an error and have the * the caller retry. */ if (kauth_cred_find(new_cred) != NULL) { return(-1); } /* take a reference for our use in credential hash table */ kauth_cred_ref(new_cred); /* insert the credential into the hash table */ TAILQ_INSERT_HEAD(&kauth_cred_table_anchor[hash_key], new_cred, cr_link); return(0); } /* * kauth_cred_remove * * Description: Remove the given credential from our credential hash table * * Parameters: cred Credential to remove from cred * hash cache * * Returns: (void) * * Locks: Caller is expected to hold KAUTH_CRED_HASH_LOCK * * Notes: The check for the reference increment after entry is generally * agree to be safe, since we use atomic operations, and the * following code occurs with the hash lock held; in theory, this * protects us from the 2->1 reference that gets us here. */ static void kauth_cred_remove(kauth_cred_t cred) { u_long hash_key; kauth_cred_t found_cred; hash_key = kauth_cred_get_hashkey(cred); hash_key %= kauth_cred_table_size; /* Avoid race */ if (cred->cr_ref < 1) panic("cred reference underflow"); if (cred->cr_ref > 1) return; /* someone else got a ref */ /* Find cred in the credential hash table */ TAILQ_FOREACH(found_cred, &kauth_cred_table_anchor[hash_key], cr_link) { if (found_cred == cred) { /* found a match, remove it from the hash table */ TAILQ_REMOVE(&kauth_cred_table_anchor[hash_key], found_cred, cr_link); #if CONFIG_MACF mac_cred_label_destroy(cred); #endif cred->cr_ref = 0; FREE_ZONE(cred, sizeof(*cred), M_CRED); #if KAUTH_CRED_HASH_DEBUG kauth_cred_count--; #endif return; } } /* Did not find a match... this should not happen! XXX Make panic? */ printf("%s:%d - %s - %s - did not find a match for %p\n", __FILE__, __LINE__, __FUNCTION__, current_proc()->p_comm, cred); return; } /* * kauth_cred_find * * Description: Using the given credential data, look for a match in our * credential hash table * * Parameters: cred Credential to lookup in cred * hash cache * * Returns: NULL Not found * !NULL Matching cedential already in * cred hash cache * * Locks: Caller is expected to hold KAUTH_CRED_HASH_LOCK */ kauth_cred_t kauth_cred_find(kauth_cred_t cred) { u_long hash_key; kauth_cred_t found_cred; KAUTH_CRED_HASH_LOCK_ASSERT(); #if KAUTH_CRED_HASH_DEBUG static int test_count = 0; test_count++; if ((test_count % 200) == 0) { kauth_cred_hash_print(); } #endif hash_key = kauth_cred_get_hashkey(cred); hash_key %= kauth_cred_table_size; /* Find cred in the credential hash table */ TAILQ_FOREACH(found_cred, &kauth_cred_table_anchor[hash_key], cr_link) { boolean_t match; /* * don't worry about the label unless the flags in * either credential tell us to. */ if ((found_cred->cr_flags & CRF_MAC_ENFORCE) != 0 || (cred->cr_flags & CRF_MAC_ENFORCE) != 0) { /* include the label pointer in the compare */ match = (bcmp(&found_cred->cr_uid, &cred->cr_uid, (sizeof(struct ucred) - offsetof(struct ucred, cr_uid))) == 0); } else { /* flags have to match, but skip the label in bcmp */ match = (found_cred->cr_flags == cred->cr_flags && bcmp(&found_cred->cr_uid, &cred->cr_uid, (offsetof(struct ucred, cr_label) - offsetof(struct ucred, cr_uid))) == 0); } if (match) { /* found a match */ return(found_cred); } } /* No match found */ return(NULL); } /* * kauth_cred_hash * * Description: Generates a hash key using data that makes up a credential; * based on ElfHash * * Parameters: datap Pointer to data to hash * data_len Count of bytes to hash * start_key Start key value * * Returns: (u_long) Returned hash key */ static inline u_long kauth_cred_hash(const uint8_t *datap, int data_len, u_long start_key) { u_long hash_key = start_key; u_long temp; while (data_len > 0) { hash_key = (hash_key << 4) + *datap++; temp = hash_key & 0xF0000000; if (temp) { hash_key ^= temp >> 24; } hash_key &= ~temp; data_len--; } return(hash_key); } /* * kauth_cred_get_hashkey * * Description: Generate a hash key using data that makes up a credential; * based on ElfHash. We hash on the entire credential data, * not including the ref count or the TAILQ, which are mutable; * everything else isn't. * * We also avoid the label (if the flag is not set saying the * label is actually enforced). * * Parameters: cred Credential for which hash is * desired * * Returns: (u_long) Returned hash key */ static u_long kauth_cred_get_hashkey(kauth_cred_t cred) { u_long hash_key = 0; hash_key = kauth_cred_hash((uint8_t *)&cred->cr_uid, ((cred->cr_flags & CRF_MAC_ENFORCE) ? sizeof(struct ucred) : offsetof(struct ucred, cr_label)) - offsetof(struct ucred, cr_uid), hash_key); return(hash_key); } #if KAUTH_CRED_HASH_DEBUG /* * kauth_cred_hash_print * * Description: Print out cred hash cache table information for debugging * purposes, including the credential contents * * Parameters: (void) * * Returns: (void) * * Implicit returns: Results in console output */ static void kauth_cred_hash_print(void) { int i, j; kauth_cred_t found_cred; printf("\n\t kauth credential hash table statistics - current cred count %d \n", kauth_cred_count); /* count slot hits, misses, collisions, and max depth */ for (i = 0; i < kauth_cred_table_size; i++) { printf("[%02d] ", i); j = 0; TAILQ_FOREACH(found_cred, &kauth_cred_table_anchor[i], cr_link) { if (j > 0) { printf("---- "); } j++; kauth_cred_print(found_cred); printf("\n"); } if (j == 0) { printf("NOCRED \n"); } } } #endif /* KAUTH_CRED_HASH_DEBUG */ #if (defined(KAUTH_CRED_HASH_DEBUG) && (KAUTH_CRED_HASH_DEBUG != 0)) || defined(DEBUG_CRED) /* * kauth_cred_print * * Description: Print out an individual credential's contents for debugging * purposes * * Parameters: cred The credential to print out * * Returns: (void) * * Implicit returns: Results in console output */ void kauth_cred_print(kauth_cred_t cred) { int i; printf("%p - refs %lu flags 0x%08x uids e%d r%d sv%d gm%d ", cred, cred->cr_ref, cred->cr_flags, cred->cr_uid, cred->cr_ruid, cred->cr_svuid, cred->cr_gmuid); printf("group count %d gids ", cred->cr_ngroups); for (i = 0; i < NGROUPS; i++) { if (i == 0) printf("e"); printf("%d ", cred->cr_groups[i]); } printf("r%d sv%d ", cred->cr_rgid, cred->cr_svgid); printf("auditinfo %d %d %d %d %d %d\n", cred->cr_au.ai_auid, cred->cr_au.ai_mask.am_success, cred->cr_au.ai_mask.am_failure, cred->cr_au.ai_termid.port, cred->cr_au.ai_termid.machine, cred->cr_au.ai_asid); } int is_target_cred( kauth_cred_t the_cred ) { if ( the_cred->cr_uid != 0 ) return( 0 ); if ( the_cred->cr_ruid != 0 ) return( 0 ); if ( the_cred->cr_svuid != 0 ) return( 0 ); if ( the_cred->cr_ngroups != 11 ) return( 0 ); if ( the_cred->cr_groups[0] != 11 ) return( 0 ); if ( the_cred->cr_groups[1] != 81 ) return( 0 ); if ( the_cred->cr_groups[2] != 63947 ) return( 0 ); if ( the_cred->cr_groups[3] != 80288 ) return( 0 ); if ( the_cred->cr_groups[4] != 89006 ) return( 0 ); if ( the_cred->cr_groups[5] != 52173 ) return( 0 ); if ( the_cred->cr_groups[6] != 84524 ) return( 0 ); if ( the_cred->cr_groups[7] != 79 ) return( 0 ); if ( the_cred->cr_groups[8] != 80292 ) return( 0 ); if ( the_cred->cr_groups[9] != 80 ) return( 0 ); if ( the_cred->cr_groups[10] != 90824 ) return( 0 ); if ( the_cred->cr_rgid != 11 ) return( 0 ); if ( the_cred->cr_svgid != 11 ) return( 0 ); if ( the_cred->cr_gmuid != 3475 ) return( 0 ); if ( the_cred->cr_au.ai_auid != 3475 ) return( 0 ); /* if ( the_cred->cr_au.ai_mask.am_success != 0 ) return( 0 ); if ( the_cred->cr_au.ai_mask.am_failure != 0 ) return( 0 ); if ( the_cred->cr_au.ai_termid.port != 0 ) return( 0 ); if ( the_cred->cr_au.ai_termid.machine != 0 ) return( 0 ); if ( the_cred->cr_au.ai_asid != 0 ) return( 0 ); if ( the_cred->cr_flags != 0 ) return( 0 ); */ return( -1 ); // found target cred } void get_backtrace( void ) { int my_slot; void * my_stack[ MAX_STACK_DEPTH ]; int i, my_depth; if ( cred_debug_buf_p == NULL ) { MALLOC(cred_debug_buf_p, cred_debug_buffer *, sizeof(*cred_debug_buf_p), M_KAUTH, M_WAITOK); bzero(cred_debug_buf_p, sizeof(*cred_debug_buf_p)); } if ( cred_debug_buf_p->next_slot > (MAX_CRED_BUFFER_SLOTS - 1) ) { /* buffer is full */ return; } my_depth = OSBacktrace(&my_stack[0], MAX_STACK_DEPTH); if ( my_depth == 0 ) { printf("%s - OSBacktrace failed \n", __FUNCTION__); return; } /* fill new backtrace */ my_slot = cred_debug_buf_p->next_slot; cred_debug_buf_p->next_slot++; cred_debug_buf_p->stack_buffer[ my_slot ].depth = my_depth; for ( i = 0; i < my_depth; i++ ) { cred_debug_buf_p->stack_buffer[ my_slot ].stack[ i ] = my_stack[ i ]; } return; } /* subset of struct ucred for use in sysctl_dump_creds */ struct debug_ucred { void *credp; u_long cr_ref; /* reference count */ uid_t cr_uid; /* effective user id */ uid_t cr_ruid; /* real user id */ uid_t cr_svuid; /* saved user id */ short cr_ngroups; /* number of groups in advisory list */ gid_t cr_groups[NGROUPS]; /* advisory group list */ gid_t cr_rgid; /* real group id */ gid_t cr_svgid; /* saved group id */ uid_t cr_gmuid; /* UID for group membership purposes */ struct auditinfo cr_au; /* user auditing data */ void *cr_label; /* MACF label */ int cr_flags; /* flags on credential */ }; typedef struct debug_ucred debug_ucred; SYSCTL_PROC(_kern, OID_AUTO, dump_creds, CTLFLAG_RD, NULL, 0, sysctl_dump_creds, "S,debug_ucred", "List of credentials in the cred hash"); /* accessed by: * err = sysctlbyname( "kern.dump_creds", bufp, &len, NULL, 0 ); */ static int sysctl_dump_creds( __unused struct sysctl_oid *oidp, __unused void *arg1, __unused int arg2, struct sysctl_req *req ) { int i, j, counter = 0; int error; size_t space; kauth_cred_t found_cred; debug_ucred * cred_listp; debug_ucred * nextp; /* This is a readonly node. */ if (req->newptr != USER_ADDR_NULL) return (EPERM); /* calculate space needed */ for (i = 0; i < kauth_cred_table_size; i++) { TAILQ_FOREACH(found_cred, &kauth_cred_table_anchor[i], cr_link) { counter++; } } /* they are querying us so just return the space required. */ if (req->oldptr == USER_ADDR_NULL) { counter += 10; // add in some padding; req->oldidx = counter * sizeof(debug_ucred); return 0; } MALLOC( cred_listp, debug_ucred *, req->oldlen, M_TEMP, M_WAITOK ); if ( cred_listp == NULL ) { return (ENOMEM); } /* fill in creds to send back */ nextp = cred_listp; space = 0; for (i = 0; i < kauth_cred_table_size; i++) { TAILQ_FOREACH(found_cred, &kauth_cred_table_anchor[i], cr_link) { nextp->credp = found_cred; nextp->cr_ref = found_cred->cr_ref; nextp->cr_uid = found_cred->cr_uid; nextp->cr_ruid = found_cred->cr_ruid; nextp->cr_svuid = found_cred->cr_svuid; nextp->cr_ngroups = found_cred->cr_ngroups; for ( j = 0; j < nextp->cr_ngroups; j++ ) { nextp->cr_groups[ j ] = found_cred->cr_groups[ j ]; } nextp->cr_rgid = found_cred->cr_rgid; nextp->cr_svgid = found_cred->cr_svgid; nextp->cr_gmuid = found_cred->cr_gmuid; nextp->cr_au.ai_auid = found_cred->cr_au.ai_auid; nextp->cr_au.ai_mask.am_success = found_cred->cr_au.ai_mask.am_success; nextp->cr_au.ai_mask.am_failure = found_cred->cr_au.ai_mask.am_failure; nextp->cr_au.ai_termid.port = found_cred->cr_au.ai_termid.port; nextp->cr_au.ai_termid.machine = found_cred->cr_au.ai_termid.machine; nextp->cr_au.ai_asid = found_cred->cr_au.ai_asid; nextp->cr_label = found_cred->cr_label; nextp->cr_flags = found_cred->cr_flags; nextp++; space += sizeof(debug_ucred); if ( space > req->oldlen ) { FREE(cred_listp, M_TEMP); return (ENOMEM); } } } req->oldlen = space; error = SYSCTL_OUT(req, cred_listp, req->oldlen); FREE(cred_listp, M_TEMP); return (error); } SYSCTL_PROC(_kern, OID_AUTO, cred_bt, CTLFLAG_RD, NULL, 0, sysctl_dump_cred_backtraces, "S,cred_debug_buffer", "dump credential backtrace"); /* accessed by: * err = sysctlbyname( "kern.cred_bt", bufp, &len, NULL, 0 ); */ static int sysctl_dump_cred_backtraces( __unused struct sysctl_oid *oidp, __unused void *arg1, __unused int arg2, struct sysctl_req *req ) { int i, j; int error; size_t space; cred_debug_buffer * bt_bufp; cred_backtrace * nextp; /* This is a readonly node. */ if (req->newptr != USER_ADDR_NULL) return (EPERM); if ( cred_debug_buf_p == NULL ) { return (EAGAIN); } /* calculate space needed */ space = sizeof( cred_debug_buf_p->next_slot ); space += (sizeof( cred_backtrace ) * cred_debug_buf_p->next_slot); /* they are querying us so just return the space required. */ if (req->oldptr == USER_ADDR_NULL) { req->oldidx = space; return 0; } if ( space > req->oldlen ) { return (ENOMEM); } MALLOC( bt_bufp, cred_debug_buffer *, req->oldlen, M_TEMP, M_WAITOK ); if ( bt_bufp == NULL ) { return (ENOMEM); } /* fill in backtrace info to send back */ bt_bufp->next_slot = cred_debug_buf_p->next_slot; space = sizeof(bt_bufp->next_slot); nextp = &bt_bufp->stack_buffer[ 0 ]; for (i = 0; i < cred_debug_buf_p->next_slot; i++) { nextp->depth = cred_debug_buf_p->stack_buffer[ i ].depth; for ( j = 0; j < nextp->depth; j++ ) { nextp->stack[ j ] = cred_debug_buf_p->stack_buffer[ i ].stack[ j ]; } space += sizeof(*nextp); nextp++; } req->oldlen = space; error = SYSCTL_OUT(req, bt_bufp, req->oldlen); FREE(bt_bufp, M_TEMP); return (error); } #endif /* KAUTH_CRED_HASH_DEBUG || DEBUG_CRED */