#ifndef VIM__H
# define VIM__H
#include "protodef.h"
#if defined(WIN32) || defined(_WIN32)
# define MSWIN
#endif
#ifdef MSWIN
# include <io.h>
#endif
#ifdef HAVE_CONFIG_H // GNU autoconf (or something else) was here
# include "auto/config.h"
# define HAVE_PATHDEF
# if (VIM_SIZEOF_INT == 0)
# error configure did not run properly. Check auto/config.log.
# endif
# if (defined(__linux__) && !defined(__ANDROID__)) || defined(__CYGWIN__)
# ifndef _XOPEN_SOURCE
# define _XOPEN_SOURCE 700
# endif
# endif
# include <limits.h>
# if defined(__CYGWIN32__) && defined(HAVE_FCHDIR)
# undef HAVE_FCHDIR
# endif
# define UINT32_TYPEDEF uint32_t
#endif
#if !defined(UINT32_TYPEDEF)
# if defined(uint32_t) // this doesn't catch typedefs, unfortunately
# define UINT32_TYPEDEF uint32_t
# else
# define UINT32_TYPEDEF unsigned int
# endif
#endif
#ifdef __TANDEM
# ifndef _TANDEM_SOURCE
# define _TANDEM_SOURCE
# endif
# include <floss.h>
# define ROOT_UID 65535
# define OLDXAW
# if (_TANDEM_ARCH_ == 2 && __H_Series_RVU >= 621)
# define SA_ONSTACK_COMPATIBILITY
# endif
#else
# define ROOT_UID 0
#endif
#if defined(MACOS_X_DARWIN) && !defined(MACOS_X)
# define MACOS_X
#endif
#if defined(MACOS_X) && !defined(HAVE_CONFIG_H)
# define UNIX
# define FEAT_GUI_MAC
#endif
#if defined(FEAT_GUI_MOTIF) \
|| defined(FEAT_GUI_GTK) \
|| defined(FEAT_GUI_ATHENA) \
|| defined(FEAT_GUI_HAIKU) \
|| defined(FEAT_GUI_MAC) \
|| defined(FEAT_GUI_MSWIN) \
|| defined(FEAT_GUI_PHOTON)
# define FEAT_GUI_ENABLED // also defined with NO_X11_INCLUDES
# if !defined(FEAT_GUI) && !defined(NO_X11_INCLUDES)
# define FEAT_GUI
# endif
#endif
#ifdef FEAT_GUI
# if defined(FEAT_DIRECTX)
# define FEAT_RENDER_OPTIONS
# endif
#endif
#ifdef MSWIN
# define VIM_SIZEOF_INT 4
#endif
#ifdef AMIGA
# ifndef FEAT_GUI_GTK // avoid problems when generating prototypes
# ifdef __GNUC__
# define VIM_SIZEOF_INT 4
# else
# define VIM_SIZEOF_INT 2
# endif
# endif
#endif
#if defined(MACOS_X) && !defined(HAVE_CONFIG_H)
# define VIM_SIZEOF_INT __SIZEOF_INT__
#endif
#if VIM_SIZEOF_INT < 4 && !defined(PROTO)
# error Vim only works with 32 bit int or larger
#endif
#include "feature.h"
#if defined(MACOS_X_DARWIN)
# if defined(FEAT_SMALL) && !defined(FEAT_CLIPBOARD)
# define FEAT_CLIPBOARD
# endif
#endif
#if defined(HAVE_X11) && defined(WANT_X11)
# define FEAT_X11
#endif
#ifdef NO_X11_INCLUDES
# ifdef FEAT_X11
# undef FEAT_X11
# endif
# ifdef FEAT_GUI_X11
# undef FEAT_GUI_X11
# endif
# ifdef FEAT_XCLIPBOARD
# undef FEAT_XCLIPBOARD
# endif
# ifdef FEAT_GUI_MOTIF
# undef FEAT_GUI_MOTIF
# endif
# ifdef FEAT_GUI_ATHENA
# undef FEAT_GUI_ATHENA
# endif
# ifdef FEAT_GUI_GTK
# undef FEAT_GUI_GTK
# endif
# ifdef FEAT_BEVAL_TIP
# undef FEAT_BEVAL_TIP
# endif
# ifdef FEAT_XIM
# undef FEAT_XIM
# endif
# ifdef FEAT_CLIENTSERVER
# undef FEAT_CLIENTSERVER
# endif
#endif
#if defined(MACOS_X_DARWIN)
# define MACOS_CONVERT
#endif
#ifndef VIMPACKAGE
# define VIMPACKAGE "vim"
#endif
#ifdef AZTEC_C
# include <functions.h>
#endif
#ifdef SASC
# include <clib/exec_protos.h>
#endif
#ifdef _DCC
# include <clib/exec_protos.h>
#endif
#ifdef __HAIKU__
# include "os_haiku.h"
# define __ARGS(x) x
#endif
#if (defined(UNIX) || defined(VMS)) \
&& (!defined(MACOS_X) || defined(HAVE_CONFIG_H))
# include "os_unix.h" // bring lots of system header files
#endif
#if defined(HAVE_ATTRIBUTE_UNUSED) || defined(__MINGW32__)
# if !defined(UNUSED)
# define UNUSED __attribute__((unused))
# endif
#else
# define UNUSED
#endif
#if defined(__sun)
# define SUN_SYSTEM
#endif
#if !defined(__cplusplus) && defined(UNIX) \
&& !defined(MACOS_X) // MACOS_X doesn't yet support osdef.h
# include "auto/osdef.h" // bring missing declarations in
#endif
#ifdef AMIGA
# include "os_amiga.h"
#endif
#ifdef MSWIN
# include "os_win32.h"
#endif
#ifdef __MINT__
# include "os_mint.h"
#endif
#if defined(MACOS_X)
# include "os_mac.h"
#endif
#ifdef __QNX__
# include "os_qnx.h"
#endif
#ifdef X_LOCALE
# include <X11/Xlocale.h>
#else
# ifdef HAVE_LOCALE_H
# include <locale.h>
# endif
#endif
#ifndef MAXPATHL
# ifdef MAXPATHLEN
# define MAXPATHL MAXPATHLEN
# else
# define MAXPATHL 256
# endif
#endif
#ifdef BACKSLASH_IN_FILENAME
# define PATH_ESC_CHARS ((char_u *)" \t\n*?[{`%#'\"|!<")
#else
# ifdef VMS
# define PATH_ESC_CHARS ((char_u *)" \t\n*?{`\\%#'\"|!")
# define SHELL_ESC_CHARS ((char_u *)" \t\n*?{`\\%#'|!()&")
# else
# define PATH_ESC_CHARS ((char_u *)" \t\n*?[{`$\\%#'\"|!<")
# define SHELL_ESC_CHARS ((char_u *)" \t\n*?[{`$\\%#'\"|!<>();&")
# endif
#endif
#define NUMBUFLEN 65
#define STR2NR_BIN 0x01
#define STR2NR_OCT 0x02
#define STR2NR_HEX 0x04
#define STR2NR_ALL (STR2NR_BIN + STR2NR_OCT + STR2NR_HEX)
#define STR2NR_NO_OCT (STR2NR_BIN + STR2NR_HEX)
#define STR2NR_FORCE 0x80 // only when ONE of the above is used
#define STR2NR_QUOTE 0x10 // ignore embedded single quotes
typedef unsigned char char_u;
typedef unsigned short short_u;
typedef unsigned int int_u;
#ifdef _WIN64
typedef unsigned __int64 long_u;
typedef __int64 long_i;
# define SCANF_HEX_LONG_U "%llx"
# define SCANF_DECIMAL_LONG_U "%llu"
# define PRINTF_HEX_LONG_U "0x%llx"
#else
# if !defined(_MSC_VER) || (_MSC_VER < 1300)
# define __w64
# endif
typedef unsigned long __w64 long_u;
typedef long __w64 long_i;
# define SCANF_HEX_LONG_U "%lx"
# define SCANF_DECIMAL_LONG_U "%lu"
# define PRINTF_HEX_LONG_U "0x%lx"
#endif
#define PRINTF_DECIMAL_LONG_U SCANF_DECIMAL_LONG_U
#if defined(SIZEOF_OFF_T) && (SIZEOF_OFF_T > VIM_SIZEOF_LONG)
# define LONG_LONG_OFF_T
#endif
#if (defined(_MSC_VER) && (_MSC_VER >= 1300)) || defined(__MINGW32__)
typedef __int64 off_T;
# ifdef __MINGW32__
# define vim_lseek lseek64
# define vim_fseek fseeko64
# define vim_ftell ftello64
# else
# define vim_lseek _lseeki64
# define vim_fseek _fseeki64
# define vim_ftell _ftelli64
# endif
#else
# ifdef PROTO
typedef long off_T;
# else
typedef off_t off_T;
# endif
# ifdef HAVE_FSEEKO
# define vim_lseek lseek
# define vim_ftell ftello
# define vim_fseek fseeko
# else
# define vim_lseek lseek
# define vim_ftell ftell
# define vim_fseek(a, b, c) fseek(a, (long)b, c)
# endif
#endif
typedef char_u schar_T;
typedef unsigned short sattr_T;
#define MAX_TYPENR 65535
typedef unsigned int u8char_T;
#ifndef UNIX // For Unix this is included in os_unix.h
# include <stdio.h>
# include <ctype.h>
#endif
#include "ascii.h"
#include "keymap.h"
#include "term.h"
#include "macros.h"
#ifdef LATTICE
# include <sys/types.h>
# include <sys/stat.h>
#endif
#ifdef _DCC
# include <sys/stat.h>
#endif
#if defined(MSWIN)
# include <sys/stat.h>
#endif
#if defined(HAVE_ERRNO_H) || defined(MSWIN)
# include <errno.h>
#endif
#ifndef UNIX
# ifdef HAVE_STRING_H
# include <string.h>
# endif
# if defined(HAVE_STRINGS_H) && !defined(NO_STRINGS_WITH_STRING_H)
# include <strings.h>
# endif
# ifdef HAVE_STAT_H
# include <stat.h>
# endif
# ifdef HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif // NON-UNIX
#include <assert.h>
#ifdef HAVE_STDINT_H
# include <stdint.h>
#endif
#ifdef HAVE_INTTYPES_H
# include <inttypes.h>
#endif
#ifdef HAVE_WCTYPE_H
# include <wctype.h>
#endif
#include <stdarg.h>
#include <stddef.h>
#if defined(HAVE_SYS_SELECT_H) && \
(!defined(HAVE_SYS_TIME_H) || defined(SYS_SELECT_WITH_SYS_TIME))
# include <sys/select.h>
#endif
#ifndef HAVE_SELECT
# ifdef HAVE_SYS_POLL_H
# include <sys/poll.h>
# elif defined(MSWIN)
# define HAVE_SELECT
# else
# ifdef HAVE_POLL_H
# include <poll.h>
# endif
# endif
#endif
#ifdef DYNAMIC_IME
# ifndef FEAT_MBYTE_IME
# define FEAT_MBYTE_IME
# endif
#endif
#ifdef DYNAMIC_GETTEXT
# ifndef FEAT_GETTEXT
# define FEAT_GETTEXT
# endif
extern char *(*dyn_libintl_gettext)(const char *msgid);
extern char *(*dyn_libintl_ngettext)(const char *msgid, const char *msgid_plural, unsigned long n);
extern char *(*dyn_libintl_bindtextdomain)(const char *domainname, const char *dirname);
extern char *(*dyn_libintl_bind_textdomain_codeset)(const char *domainname, const char *codeset);
extern char *(*dyn_libintl_textdomain)(const char *domainname);
extern int (*dyn_libintl_wputenv)(const wchar_t *envstring);
#endif
#ifdef FEAT_GETTEXT
# ifdef DYNAMIC_GETTEXT
# define _(x) (*dyn_libintl_gettext)((char *)(x))
# define NGETTEXT(x, xs, n) (*dyn_libintl_ngettext)((char *)(x), (char *)(xs), (n))
# define N_(x) x
# define bindtextdomain(domain, dir) (*dyn_libintl_bindtextdomain)((domain), (dir))
# define bind_textdomain_codeset(domain, codeset) (*dyn_libintl_bind_textdomain_codeset)((domain), (codeset))
# if !defined(HAVE_BIND_TEXTDOMAIN_CODESET)
# define HAVE_BIND_TEXTDOMAIN_CODESET 1
# endif
# define textdomain(domain) (*dyn_libintl_textdomain)(domain)
# define libintl_wputenv(envstring) (*dyn_libintl_wputenv)(envstring)
# else
# include <libintl.h>
# define _(x) gettext((char *)(x))
# define NGETTEXT(x, xs, n) ngettext((x), (xs), (n))
# ifdef gettext_noop
# define N_(x) gettext_noop(x)
# else
# define N_(x) x
# endif
# endif
#else
# define _(x) ((char *)(x))
# define NGETTEXT(x, xs, n) (((n) == 1) ? (char *)(x) : (char *)(xs))
# define N_(x) x
# ifdef bindtextdomain
# undef bindtextdomain
# endif
# define bindtextdomain(x, y) // empty
# ifdef bind_textdomain_codeset
# undef bind_textdomain_codeset
# endif
# define bind_textdomain_codeset(x, y) // empty
# ifdef textdomain
# undef textdomain
# endif
# define textdomain(x) // empty
#endif
#define VALID_NO_UPDATE 5 // no new changes, keep the command line if
#define VALID 10 // buffer not changed, or changes marked
#define INVERTED 20 // redisplay inverted part that changed
#define INVERTED_ALL 25 // redisplay whole inverted part
#define REDRAW_TOP 30 // display first w_upd_rows screen lines
#define SOME_VALID 35 // like NOT_VALID but may scroll
#define NOT_VALID 40 // buffer needs complete redraw
#define CLEAR 50 // screen messed up, clear it
#define SLF_RIGHTLEFT 1
#define SLF_POPUP 2
#define MB_FILLER_CHAR '<' // character used when a double-width character
#define VALID_WROW 0x01 // w_wrow (window row) is valid
#define VALID_WCOL 0x02 // w_wcol (window col) is valid
#define VALID_VIRTCOL 0x04 // w_virtcol (file col) is valid
#define VALID_CHEIGHT 0x08 // w_cline_height and w_cline_folded valid
#define VALID_CROW 0x10 // w_cline_row is valid
#define VALID_BOTLINE 0x20 // w_botine and w_empty_rows are valid
#define VALID_BOTLINE_AP 0x40 // w_botine is approximated
#define VALID_TOPLINE 0x80 // w_topline is valid (for cursor position)
#define POPF_IS_POPUP 0x01 // this is a popup window
#define POPF_HIDDEN 0x02 // popup is not displayed
#define POPF_CURSORLINE 0x04 // popup is highlighting at the cursorline
#define POPF_ON_CMDLINE 0x08 // popup overlaps command line
#define POPF_DRAG 0x10 // popup can be moved by dragging
#define POPF_RESIZE 0x20 // popup can be resized by dragging
#define POPF_MAPPING 0x40 // mapping keys
#define POPF_INFO 0x80 // used for info of popup menu
#define POPF_INFO_MENU 0x100 // align info popup with popup menu
#define POPF_POSINVERT 0x200 // vertical position can be inverted
#define POPUP_HANDLED_1 0x01 // used by mouse_find_win()
#define POPUP_HANDLED_2 0x02 // used by popup_do_filter()
#define POPUP_HANDLED_3 0x04 // used by popup_check_cursor_pos()
#define POPUP_HANDLED_4 0x08 // used by may_update_popup_mask()
#define POPUP_HANDLED_5 0x10 // used by update_popups()
#define HL_NORMAL 0x00
#define HL_INVERSE 0x01
#define HL_BOLD 0x02
#define HL_ITALIC 0x04
#define HL_UNDERLINE 0x08
#define HL_UNDERCURL 0x10
#define HL_STANDOUT 0x20
#define HL_NOCOMBINE 0x40
#define HL_STRIKETHROUGH 0x80
#define HL_ALL 0xff
#define MSG_HIST 0x1000
#define NORMAL 0x01 // Normal mode, command expected
#define VISUAL 0x02 // Visual mode - use get_real_state()
#define OP_PENDING 0x04 // Normal mode, operator is pending - use
#define CMDLINE 0x08 // Editing command line
#define INSERT 0x10 // Insert mode
#define LANGMAP 0x20 // Language mapping, can be combined with
#define REPLACE_FLAG 0x40 // Replace mode flag
#define REPLACE (REPLACE_FLAG + INSERT)
#define VREPLACE_FLAG 0x80 // Virtual-replace mode flag
#define VREPLACE (REPLACE_FLAG + VREPLACE_FLAG + INSERT)
#define LREPLACE (REPLACE_FLAG + LANGMAP)
#define NORMAL_BUSY (0x100 + NORMAL) // Normal mode, busy with a command
#define HITRETURN (0x200 + NORMAL) // waiting for return or command
#define ASKMORE 0x300 // Asking if you want --more--
#define SETWSIZE 0x400 // window size has changed
#define ABBREV 0x500 // abbreviation instead of mapping
#define EXTERNCMD 0x600 // executing an external command
#define SHOWMATCH (0x700 + INSERT) // show matching paren
#define CONFIRM 0x800 // ":confirm" prompt
#define SELECTMODE 0x1000 // Select mode, only for mappings
#define TERMINAL 0x2000 // Terminal mode
#define MODE_ALL 0xffff
#define MAP_ALL_MODES (0x3f | SELECTMODE | TERMINAL)
#define FORWARD 1
#define BACKWARD (-1)
#define FORWARD_FILE 3
#define BACKWARD_FILE (-3)
#if !(defined(OK) && (OK == 1))
# define OK 1
#endif
#define FAIL 0
#define NOTDONE 2 // not OK or FAIL but skipped
#define BF_RECOVERED 0x01 // buffer has been recovered
#define BF_CHECK_RO 0x02 // need to check readonly when loading file
#define BF_NEVERLOADED 0x04 // file has never been loaded into buffer,
#define BF_NOTEDITED 0x08 // Set when file name is changed after
#define BF_NEW 0x10 // file didn't exist when editing started
#define BF_NEW_W 0x20 // Warned for BF_NEW and file created
#define BF_READERR 0x40 // got errors while reading the file
#define BF_DUMMY 0x80 // dummy buffer, only used internally
#define BF_PRESERVED 0x100 // ":preserve" was used
#define BF_SYN_SET 0x200 // 'syntax' option was set
#define BF_NO_SEA 0x400 // no swap_exists_action (ATTENTION prompt)
#define BF_WRITE_MASK (BF_NOTEDITED + BF_NEW + BF_READERR)
#define EXPAND_UNSUCCESSFUL (-2)
#define EXPAND_OK (-1)
#define EXPAND_NOTHING 0
#define EXPAND_COMMANDS 1
#define EXPAND_FILES 2
#define EXPAND_DIRECTORIES 3
#define EXPAND_SETTINGS 4
#define EXPAND_BOOL_SETTINGS 5
#define EXPAND_TAGS 6
#define EXPAND_OLD_SETTING 7
#define EXPAND_HELP 8
#define EXPAND_BUFFERS 9
#define EXPAND_EVENTS 10
#define EXPAND_MENUS 11
#define EXPAND_SYNTAX 12
#define EXPAND_HIGHLIGHT 13
#define EXPAND_AUGROUP 14
#define EXPAND_USER_VARS 15
#define EXPAND_MAPPINGS 16
#define EXPAND_TAGS_LISTFILES 17
#define EXPAND_FUNCTIONS 18
#define EXPAND_USER_FUNC 19
#define EXPAND_EXPRESSION 20
#define EXPAND_MENUNAMES 21
#define EXPAND_USER_COMMANDS 22
#define EXPAND_USER_CMD_FLAGS 23
#define EXPAND_USER_NARGS 24
#define EXPAND_USER_COMPLETE 25
#define EXPAND_ENV_VARS 26
#define EXPAND_LANGUAGE 27
#define EXPAND_COLORS 28
#define EXPAND_COMPILER 29
#define EXPAND_USER_DEFINED 30
#define EXPAND_USER_LIST 31
#define EXPAND_SHELLCMD 32
#define EXPAND_CSCOPE 33
#define EXPAND_SIGN 34
#define EXPAND_PROFILE 35
#define EXPAND_BEHAVE 36
#define EXPAND_FILETYPE 37
#define EXPAND_FILES_IN_PATH 38
#define EXPAND_OWNSYNTAX 39
#define EXPAND_LOCALES 40
#define EXPAND_HISTORY 41
#define EXPAND_USER 42
#define EXPAND_SYNTIME 43
#define EXPAND_USER_ADDR_TYPE 44
#define EXPAND_PACKADD 45
#define EXPAND_MESSAGES 46
#define EXPAND_MAPCLEAR 47
#define EXPAND_ARGLIST 48
#define EXPAND_DIFF_BUFFERS 49
#define EXMODE_NORMAL 1
#define EXMODE_VIM 2
#define WILD_FREE 1
#define WILD_EXPAND_FREE 2
#define WILD_EXPAND_KEEP 3
#define WILD_NEXT 4
#define WILD_PREV 5
#define WILD_ALL 6
#define WILD_LONGEST 7
#define WILD_ALL_KEEP 8
#define WILD_LIST_NOTFOUND 0x01
#define WILD_HOME_REPLACE 0x02
#define WILD_USE_NL 0x04
#define WILD_NO_BEEP 0x08
#define WILD_ADD_SLASH 0x10
#define WILD_KEEP_ALL 0x20
#define WILD_SILENT 0x40
#define WILD_ESCAPE 0x80
#define WILD_ICASE 0x100
#define WILD_ALLLINKS 0x200
#define WILD_IGNORE_COMPLETESLASH 0x400
#define WILD_NOERROR 0x800 // sets EW_NOERROR
#define WILD_BUFLASTUSED 0x1000
#define BUF_DIFF_FILTER 0x2000
#define EW_DIR 0x01 // include directory names
#define EW_FILE 0x02 // include file names
#define EW_NOTFOUND 0x04 // include not found names
#define EW_ADDSLASH 0x08 // append slash to directory name
#define EW_KEEPALL 0x10 // keep all matches
#define EW_SILENT 0x20 // don't print "1 returned" from shell
#define EW_EXEC 0x40 // executable files
#define EW_PATH 0x80 // search in 'path' too
#define EW_ICASE 0x100 // ignore case
#define EW_NOERROR 0x200 // no error for bad regexp
#define EW_NOTWILD 0x400 // add match with literal name if exists
#define EW_KEEPDOLLAR 0x800 // do not escape $, $var is expanded
#define EW_ALLLINKS 0x1000 // also links not pointing to existing file
#define EW_SHELLCMD 0x2000 // called from expand_shellcmd(), don't check
#define EW_DODOT 0x4000 // also files starting with a dot
#define EW_EMPTYOK 0x8000 // no matches is not an error
#define EW_NOTENV 0x10000 // do not expand environment variables
#define FINDFILE_FILE 0 // only files
#define FINDFILE_DIR 1 // only directories
#define FINDFILE_BOTH 2 // files and directories
#define W_ENDCOL(wp) (wp->w_wincol + wp->w_width)
#ifdef FEAT_MENU
# define W_WINROW(wp) (wp->w_winrow + wp->w_winbar_height)
#else
# define W_WINROW(wp) (wp->w_winrow)
#endif
#define FIND_ANY 1
#define FIND_DEFINE 2
#define CHECK_PATH 3
#define ACTION_SHOW 1
#define ACTION_GOTO 2
#define ACTION_SPLIT 3
#define ACTION_SHOW_ALL 4
#define ACTION_EXPAND 5
#ifdef FEAT_SYN_HL
# define SST_MIN_ENTRIES 150 // minimal size for state stack array
# define SST_MAX_ENTRIES 1000 // maximal size for state stack array
# define SST_FIX_STATES 7 // size of sst_stack[].
# define SST_DIST 16 // normal distance between entries
# define SST_INVALID (synstate_T *)-1 // invalid syn_state pointer
# define HL_CONTAINED 0x01 // not used on toplevel
# define HL_TRANSP 0x02 // has no highlighting
# define HL_ONELINE 0x04 // match within one line only
# define HL_HAS_EOL 0x08 // end pattern that matches with $
# define HL_SYNC_HERE 0x10 // sync point after this item (syncing only)
# define HL_SYNC_THERE 0x20 // sync point at current line (syncing only)
# define HL_MATCH 0x40 // use match ID instead of item ID
# define HL_SKIPNL 0x80 // nextgroup can skip newlines
# define HL_SKIPWHITE 0x100 // nextgroup can skip white space
# define HL_SKIPEMPTY 0x200 // nextgroup can skip empty lines
# define HL_KEEPEND 0x400 // end match always kept
# define HL_EXCLUDENL 0x800 // exclude NL from match
# define HL_DISPLAY 0x1000 // only used for displaying, not syncing
# define HL_FOLD 0x2000 // define fold
# define HL_EXTEND 0x4000 // ignore a keepend
# define HL_MATCHCONT 0x8000 // match continued from previous line
# define HL_TRANS_CONT 0x10000 // transparent item without contains arg
# define HL_CONCEAL 0x20000 // can be concealed
# define HL_CONCEALENDS 0x40000 // can be concealed
#endif
#define SEARCH_REV 0x01 // go in reverse of previous dir.
#define SEARCH_ECHO 0x02 // echo the search command and handle options
#define SEARCH_MSG 0x0c // give messages (yes, it's not 0x04)
#define SEARCH_NFMSG 0x08 // give all messages except not found
#define SEARCH_OPT 0x10 // interpret optional flags
#define SEARCH_HIS 0x20 // put search pattern in history
#define SEARCH_END 0x40 // put cursor at end of match
#define SEARCH_NOOF 0x80 // don't add offset to position
#define SEARCH_START 0x100 // start search without col offset
#define SEARCH_MARK 0x200 // set previous context mark
#define SEARCH_KEEP 0x400 // keep previous search pattern
#define SEARCH_PEEK 0x800 // peek for typed char, cancel search
#define SEARCH_COL 0x1000 // start at specified column instead of zero
#define FIND_IDENT 1 // find identifier (word)
#define FIND_STRING 2 // find any string (WORD)
#define FIND_EVAL 4 // include "->", "[]" and "."
#define FIND_NOERROR 8 // no error when no word found
#define FNAME_MESS 1 // give error message
#define FNAME_EXP 2 // expand to path
#define FNAME_HYP 4 // check for hypertext link
#define FNAME_INCL 8 // apply 'includeexpr'
#define FNAME_REL 16 // ".." and "./" are relative to the (current)
#define FNAME_UNESC 32 // remove backslashes used for escaping
#define GETF_SETMARK 0x01 // set pcmark before jumping
#define GETF_ALT 0x02 // jumping to alternate file (not buf num)
#define GETF_SWITCH 0x04 // respect 'switchbuf' settings when jumping
#define GETFILE_ERROR 1 // normal error
#define GETFILE_NOT_WRITTEN 2 // "not written" error
#define GETFILE_SAME_FILE 0 // success, same file
#define GETFILE_OPEN_OTHER -1 // success, opened another file
#define GETFILE_UNUSED 8
#define GETFILE_SUCCESS(x) ((x) <= 0)
#define BLN_CURBUF 1 // may re-use curbuf for new buffer
#define BLN_LISTED 2 // put new buffer in buffer list
#define BLN_DUMMY 4 // allocating dummy buffer
#define BLN_NEW 8 // create a new buffer
#define BLN_NOOPT 16 // don't copy options to existing buffer
#define BLN_DUMMY_OK 32 // also find an existing dummy buffer
#define BLN_REUSE 64 // may re-use number from buf_reuse
#define KEY_OPEN_FORW 0x101
#define KEY_OPEN_BACK 0x102
#define KEY_COMPLETE 0x103 // end of completion
#define REMAP_YES 0 // allow remapping
#define REMAP_NONE -1 // no remapping
#define REMAP_SCRIPT -2 // remap script-local mappings only
#define REMAP_SKIP -3 // no remapping for first char
#define SHELL_FILTER 1 // filtering text
#define SHELL_EXPAND 2 // expanding wildcards
#define SHELL_COOKED 4 // set term to cooked mode
#define SHELL_DOOUT 8 // redirecting output
#define SHELL_SILENT 16 // don't print error returned by command
#define SHELL_READ 32 // read lines and insert into buffer
#define SHELL_WRITE 64 // write lines from buffer
#define NODE_NORMAL 0 // file or directory, check with mch_isdir()
#define NODE_WRITABLE 1 // something we can write to (character
#define NODE_OTHER 2 // non-writable thing (e.g., block device)
#define READ_NEW 0x01 // read a file into a new buffer
#define READ_FILTER 0x02 // read filter output
#define READ_STDIN 0x04 // read from stdin
#define READ_BUFFER 0x08 // read from curbuf (converting stdin)
#define READ_DUMMY 0x10 // reading into a dummy buffer
#define READ_KEEP_UNDO 0x20 // keep undo info
#define READ_FIFO 0x40 // read from fifo or socket
#define INDENT_SET 1 // set indent
#define INDENT_INC 2 // increase indent
#define INDENT_DEC 3 // decrease indent
#define FM_BACKWARD 0x01 // search backwards
#define FM_FORWARD 0x02 // search forwards
#define FM_BLOCKSTOP 0x04 // stop at start/end of block
#define FM_SKIPCOMM 0x08 // skip comments
#define DOBUF_GOTO 0 // go to specified buffer
#define DOBUF_SPLIT 1 // split window and go to specified buffer
#define DOBUF_UNLOAD 2 // unload specified buffer(s)
#define DOBUF_DEL 3 // delete specified buffer(s) from buflist
#define DOBUF_WIPE 4 // delete specified buffer(s) really
#define DOBUF_WIPE_REUSE 5 // like DOBUF_WIPE an keep number for reuse
#define DOBUF_CURRENT 0 // "count" buffer from current buffer
#define DOBUF_FIRST 1 // "count" buffer from first buffer
#define DOBUF_LAST 2 // "count" buffer from last buffer
#define DOBUF_MOD 3 // "count" mod. buffer from current buffer
#define RE_SEARCH 0 // save/use pat in/from search_pattern
#define RE_SUBST 1 // save/use pat in/from subst_pattern
#define RE_BOTH 2 // save pat in both patterns
#define RE_LAST 2 // use last used pattern if "pat" is NULL
#define RE_MAGIC 1 // 'magic' option
#define RE_STRING 2 // match in string instead of buffer text
#define RE_STRICT 4 // don't allow [abc] without ]
#define RE_AUTO 8 // automatic engine selection
#ifdef FEAT_SYN_HL
# define REX_SET 1 // to allow \z\(...\),
# define REX_USE 2 // to allow \z\1 et al.
# define REX_ALL (REX_SET | REX_USE)
#endif
#define FPC_SAME 1 // both exist and are the same file.
#define FPC_DIFF 2 // both exist and are different files.
#define FPC_NOTX 4 // both don't exist.
#define FPC_DIFFX 6 // one of them doesn't exist.
#define FPC_SAMEX 7 // both don't exist and file names are same.
#define ECMD_HIDE 0x01 // don't free the current buffer
#define ECMD_SET_HELP 0x02 // set b_help flag of (new) buffer before
#define ECMD_OLDBUF 0x04 // use existing buffer if it exists
#define ECMD_FORCEIT 0x08 // ! used in Ex command
#define ECMD_ADDBUF 0x10 // don't edit, just add to buffer list
#define ECMD_LASTL (linenr_T)0 // use last position in loaded file
#define ECMD_LAST (linenr_T)-1 // use last position in all files
#define ECMD_ONE (linenr_T)1 // use first line
#define DOCMD_VERBOSE 0x01 // included command in error message
#define DOCMD_NOWAIT 0x02 // don't call wait_return() and friends
#define DOCMD_REPEAT 0x04 // repeat exec. until getline() returns NULL
#define DOCMD_KEYTYPED 0x08 // don't reset KeyTyped
#define DOCMD_EXCRESET 0x10 // reset exception environment (for debugging)
#define DOCMD_KEEPLINE 0x20 // keep typed line for repeating with "."
#define BL_WHITE 1 // cursor on first non-white in the line
#define BL_SOL 2 // use 'sol' option
#define BL_FIX 4 // don't leave cursor on a NUL
#define MFS_ALL 1 // also sync blocks with negative numbers
#define MFS_STOP 2 // stop syncing when a character is available
#define MFS_FLUSH 4 // flushed file to disk
#define MFS_ZERO 8 // only write block 0
#define BCO_ENTER 1 // going to enter the buffer
#define BCO_ALWAYS 2 // always copy the options
#define BCO_NOHELP 4 // don't touch the help related options
#define PUT_FIXINDENT 1 // make indent look nice
#define PUT_CURSEND 2 // leave cursor after end of new text
#define PUT_CURSLINE 4 // leave cursor on last line of new text
#define PUT_LINE 8 // put register as lines
#define PUT_LINE_SPLIT 16 // split line for linewise register
#define PUT_LINE_FORWARD 32 // put linewise register below Visual sel.
#define SIN_CHANGED 1 // call changed_bytes() when line changed
#define SIN_INSERT 2 // insert indent before existing text
#define SIN_UNDO 4 // save line for undo before changing it
#define INSCHAR_FORMAT 1 // force formatting
#define INSCHAR_DO_COM 2 // format comments
#define INSCHAR_CTRLV 4 // char typed just after CTRL-V
#define INSCHAR_NO_FEX 8 // don't use 'formatexpr'
#define INSCHAR_COM_LIST 16 // format comments with list/2nd line indent
#define OPENLINE_DELSPACES 1 // delete spaces after cursor
#define OPENLINE_DO_COM 2 // format comments
#define OPENLINE_KEEPTRAIL 4 // keep trailing spaces
#define OPENLINE_MARKFIX 8 // fix mark positions
#define OPENLINE_COM_LIST 16 // format comments with list/2nd line indent
#define HIST_CMD 0 // colon commands
#define HIST_SEARCH 1 // search commands
#define HIST_EXPR 2 // expressions (from entering = register)
#define HIST_INPUT 3 // input() lines
#define HIST_DEBUG 4 // debug commands
#define HIST_COUNT 5 // number of history tables
#define BARTYPE_VERSION 1
#define BARTYPE_HISTORY 2
#define BARTYPE_REGISTER 3
#define BARTYPE_MARK 4
#define VIMINFO_VERSION 4
#define VIMINFO_VERSION_WITH_HISTORY 2
#define VIMINFO_VERSION_WITH_REGISTERS 3
#define VIMINFO_VERSION_WITH_MARKS 4
#define DT_TAG 1 // jump to newer position or same tag again
#define DT_POP 2 // jump to older position
#define DT_NEXT 3 // jump to next match of same tag
#define DT_PREV 4 // jump to previous match of same tag
#define DT_FIRST 5 // jump to first match of same tag
#define DT_LAST 6 // jump to first match of same tag
#define DT_SELECT 7 // jump to selection from list
#define DT_HELP 8 // like DT_TAG, but no wildcards
#define DT_JUMP 9 // jump to new tag or selection from list
#define DT_CSCOPE 10 // cscope find command (like tjump)
#define DT_LTAG 11 // tag using location list
#define DT_FREE 99 // free cached matches
#define TAG_HELP 1 // only search for help tags
#define TAG_NAMES 2 // only return name of tag
#define TAG_REGEXP 4 // use tag pattern as regexp
#define TAG_NOIC 8 // don't always ignore case
#ifdef FEAT_CSCOPE
# define TAG_CSCOPE 16 // cscope tag
#endif
#define TAG_VERBOSE 32 // message verbosity
#define TAG_INS_COMP 64 // Currently doing insert completion
#define TAG_KEEP_LANG 128 // keep current language
#define TAG_NO_TAGFUNC 256 // do not use 'tagfunc'
#define TAG_MANY 300 // When finding many tags (for completion),
#define VIM_GENERIC 0
#define VIM_ERROR 1
#define VIM_WARNING 2
#define VIM_INFO 3
#define VIM_QUESTION 4
#define VIM_LAST_TYPE 4 // sentinel value
#define VIM_YES 2
#define VIM_NO 3
#define VIM_CANCEL 4
#define VIM_ALL 5
#define VIM_DISCARDALL 6
#define WSP_ROOM 1 // require enough room
#define WSP_VERT 2 // split vertically
#define WSP_TOP 4 // window at top-left of shell
#define WSP_BOT 8 // window at bottom-right of shell
#define WSP_HELP 16 // creating the help window
#define WSP_BELOW 32 // put new window below/right
#define WSP_ABOVE 64 // put new window above/left
#define WSP_NEWLOC 128 // don't copy location list
#define RESIZE_VERT 1 // resize vertically
#define RESIZE_HOR 2 // resize horizontally
#define RESIZE_BOTH 15 // resize in both directions
#define CCGD_AW 1 // do autowrite if buffer was changed
#define CCGD_MULTWIN 2 // check also when several wins for the buf
#define CCGD_FORCEIT 4 // ! used
#define CCGD_ALLBUF 8 // may write all buffers
#define CCGD_EXCMD 16 // may suggest using !
#define OPT_FREE 0x01 // free old value if it was allocated
#define OPT_GLOBAL 0x02 // use global value
#define OPT_LOCAL 0x04 // use local value
#define OPT_MODELINE 0x08 // option in modeline
#define OPT_WINONLY 0x10 // only set window-local options
#define OPT_NOWIN 0x20 // don't set window-local options
#define OPT_ONECOLUMN 0x40 // list options one per line
#define DLG_BUTTON_SEP '\n'
#define DLG_HOTKEY_CHAR '&'
#define NO_SCREEN 2 // no screen updating yet
#define NO_BUFFERS 1 // not all buffers loaded yet
#define SEA_NONE 0 // don't use dialog
#define SEA_DIALOG 1 // use dialog when possible
#define SEA_QUIT 2 // quit editing the file
#define SEA_RECOVER 3 // recover the file
#define MIN_SWAP_PAGE_SIZE 1048
#define MAX_SWAP_PAGE_SIZE 50000
#define SID_MODELINE -1 // when using a modeline
#define SID_CMDARG -2 // for "--cmd" argument
#define SID_CARG -3 // for "-c" argument
#define SID_ENV -4 // for sourcing environment variable
#define SID_ERROR -5 // option was reset because of an error
#define SID_NONE -6 // don't set scriptID
enum auto_event
{
EVENT_BUFADD = 0, EVENT_BUFDELETE, EVENT_BUFENTER, EVENT_BUFFILEPOST, EVENT_BUFFILEPRE, EVENT_BUFHIDDEN, EVENT_BUFLEAVE, EVENT_BUFNEW, EVENT_BUFNEWFILE, EVENT_BUFREADCMD, EVENT_BUFREADPOST, EVENT_BUFREADPRE, EVENT_BUFUNLOAD, EVENT_BUFWINENTER, EVENT_BUFWINLEAVE, EVENT_BUFWIPEOUT, EVENT_BUFWRITECMD, EVENT_BUFWRITEPOST, EVENT_BUFWRITEPRE, EVENT_CMDLINECHANGED, EVENT_CMDLINEENTER, EVENT_CMDLINELEAVE, EVENT_CMDUNDEFINED, EVENT_CMDWINENTER, EVENT_CMDWINLEAVE, EVENT_COLORSCHEME, EVENT_COLORSCHEMEPRE, EVENT_COMPLETECHANGED, EVENT_COMPLETEDONE, EVENT_COMPLETEDONEPRE, EVENT_CURSORHOLD, EVENT_CURSORHOLDI, EVENT_CURSORMOVED, EVENT_CURSORMOVEDI, EVENT_DIFFUPDATED, EVENT_DIRCHANGED, EVENT_ENCODINGCHANGED, EVENT_EXITPRE, EVENT_FILEAPPENDCMD, EVENT_FILEAPPENDPOST, EVENT_FILEAPPENDPRE, EVENT_FILECHANGEDRO, EVENT_FILECHANGEDSHELL, EVENT_FILECHANGEDSHELLPOST, EVENT_FILEREADCMD, EVENT_FILEREADPOST, EVENT_FILEREADPRE, EVENT_FILETYPE, EVENT_FILEWRITECMD, EVENT_FILEWRITEPOST, EVENT_FILEWRITEPRE, EVENT_FILTERREADPOST, EVENT_FILTERREADPRE, EVENT_FILTERWRITEPOST, EVENT_FILTERWRITEPRE, EVENT_FOCUSGAINED, EVENT_FOCUSLOST, EVENT_FUNCUNDEFINED, EVENT_GUIENTER, EVENT_GUIFAILED, EVENT_INSERTCHANGE, EVENT_INSERTCHARPRE, EVENT_INSERTENTER, EVENT_INSERTLEAVE, EVENT_MENUPOPUP, EVENT_OPTIONSET, EVENT_QUICKFIXCMDPOST, EVENT_QUICKFIXCMDPRE, EVENT_QUITPRE, EVENT_REMOTEREPLY, EVENT_SAFESTATE, EVENT_SAFESTATEAGAIN, EVENT_SESSIONLOADPOST, EVENT_SHELLCMDPOST, EVENT_SHELLFILTERPOST, EVENT_SOURCECMD, EVENT_SOURCEPRE, EVENT_SOURCEPOST, EVENT_SPELLFILEMISSING, EVENT_STDINREADPOST, EVENT_STDINREADPRE, EVENT_SWAPEXISTS, EVENT_SYNTAX, EVENT_TABCLOSED, EVENT_TABENTER, EVENT_TABLEAVE, EVENT_TABNEW, EVENT_TERMCHANGED, EVENT_TERMINALOPEN, EVENT_TERMINALWINOPEN, EVENT_TERMRESPONSE, EVENT_TEXTCHANGED, EVENT_TEXTCHANGEDI, EVENT_TEXTCHANGEDP, EVENT_TEXTYANKPOST, EVENT_USER, EVENT_VIMENTER, EVENT_VIMLEAVE, EVENT_VIMLEAVEPRE, EVENT_VIMRESIZED, EVENT_WINENTER, EVENT_WINLEAVE, EVENT_WINNEW,
NUM_EVENTS };
typedef enum auto_event event_T;
typedef enum
{
HLF_8 = 0 , HLF_EOB , HLF_AT , HLF_D , HLF_E , HLF_H , HLF_I , HLF_L , HLF_M , HLF_CM , HLF_N , HLF_LNA , HLF_LNB , HLF_CLN , HLF_R , HLF_S , HLF_SNC , HLF_C , HLF_T , HLF_V , HLF_VNC , HLF_W , HLF_WM , HLF_FL , HLF_FC , HLF_ADD , HLF_CHD , HLF_DED , HLF_TXD , HLF_CONCEAL , HLF_SC , HLF_SPB , HLF_SPC , HLF_SPR , HLF_SPL , HLF_PNI , HLF_PSI , HLF_PSB , HLF_PST , HLF_TP , HLF_TPS , HLF_TPF , HLF_CUC , HLF_CUL , HLF_MC , HLF_QFL , HLF_ST , HLF_STNC , HLF_COUNT } hlf_T;
#define HL_FLAGS {'8', '~', '@', 'd', 'e', 'h', 'i', 'l', 'm', 'M', \
'n', 'a', 'b', 'N', 'r', 's', 'S', 'c', 't', 'v', 'V', \
'w', 'W', 'f', 'F', 'A', 'C', 'D', 'T', '-', '>', \
'B', 'P', 'R', 'L', \
'+', '=', 'x', 'X', '*', '#', '_', '!', '.', 'o', 'q', \
'z', 'Z'}
#ifndef TRUE
# define FALSE 0 // note: this is an int, not a long!
# define TRUE 1
#endif
#define MAYBE 2 // sometimes used for a variant on TRUE
#ifndef UINT32_T
typedef UINT32_TYPEDEF UINT32_T;
#endif
#define OP_NOP 0 // no pending operation
#define OP_DELETE 1 // "d" delete operator
#define OP_YANK 2 // "y" yank operator
#define OP_CHANGE 3 // "c" change operator
#define OP_LSHIFT 4 // "<" left shift operator
#define OP_RSHIFT 5 // ">" right shift operator
#define OP_FILTER 6 // "!" filter operator
#define OP_TILDE 7 // "g~" switch case operator
#define OP_INDENT 8 // "=" indent operator
#define OP_FORMAT 9 // "gq" format operator
#define OP_COLON 10 // ":" colon operator
#define OP_UPPER 11 // "gU" make upper case operator
#define OP_LOWER 12 // "gu" make lower case operator
#define OP_JOIN 13 // "J" join operator, only for Visual mode
#define OP_JOIN_NS 14 // "gJ" join operator, only for Visual mode
#define OP_ROT13 15 // "g?" rot-13 encoding
#define OP_REPLACE 16 // "r" replace chars, only for Visual mode
#define OP_INSERT 17 // "I" Insert column, only for Visual mode
#define OP_APPEND 18 // "A" Append column, only for Visual mode
#define OP_FOLD 19 // "zf" define a fold
#define OP_FOLDOPEN 20 // "zo" open folds
#define OP_FOLDOPENREC 21 // "zO" open folds recursively
#define OP_FOLDCLOSE 22 // "zc" close folds
#define OP_FOLDCLOSEREC 23 // "zC" close folds recursively
#define OP_FOLDDEL 24 // "zd" delete folds
#define OP_FOLDDELREC 25 // "zD" delete folds recursively
#define OP_FORMAT2 26 // "gw" format operator, keeps cursor pos
#define OP_FUNCTION 27 // "g@" call 'operatorfunc'
#define OP_NR_ADD 28 // "<C-A>" Add to the number or alphabetic
#define OP_NR_SUB 29 // "<C-X>" Subtract from the number or
#define MCHAR 0 // character-wise movement/register
#define MLINE 1 // line-wise movement/register
#define MBLOCK 2 // block-wise register
#define MAUTO 0xff // Decide between MLINE/MCHAR
#define MIN_COLUMNS 12 // minimal columns for screen
#define MIN_LINES 2 // minimal lines for screen
#define STATUS_HEIGHT 1 // height of a status line under a window
#ifdef FEAT_MENU // height of a status line under a window
# define WINBAR_HEIGHT(wp) (wp)->w_winbar_height
# define VISIBLE_HEIGHT(wp) ((wp)->w_height + (wp)->w_winbar_height)
#else
# define WINBAR_HEIGHT(wp) 0
# define VISIBLE_HEIGHT(wp) (wp)->w_height
#endif
#define QF_WINHEIGHT 10 // default height for quickfix window
#ifndef CMDBUFFSIZE
# define CMDBUFFSIZE 256 // size of the command processing buffer
#endif
#define LSIZE 512 // max. size of a line in the tags file
#define IOSIZE (1024+1) // file i/o and sprintf buffer size
#define DIALOG_MSG_SIZE 1000 // buffer size for dialog_msg()
#define MSG_BUF_LEN 480 // length of buffer for small messages
#define MSG_BUF_CLEN (MSG_BUF_LEN / 6) // cell length (worst case: utf-8
#define FOLD_TEXT_LEN 51 // buffer size for get_foldtext()
#define TBUFSZ 2048 // buffer size for termcap entry
#define MAXMAPLEN 50
#define UNDO_HASH_SIZE 32
#ifdef HAVE_FCNTL_H
# include <fcntl.h>
#endif
#ifdef BINARY_FILE_IO
# define WRITEBIN "wb" // no CR-LF translation
# define READBIN "rb"
# define APPENDBIN "ab"
#else
# define WRITEBIN "w"
# define READBIN "r"
# define APPENDBIN "a"
#endif
#if defined(__CYGWIN32__)
# define O_EXTRA O_BINARY
#else
# define O_EXTRA 0
#endif
#ifndef O_NOFOLLOW
# define O_NOFOLLOW 0
#endif
#ifndef W_OK
# define W_OK 2 // for systems that don't have W_OK in unistd.h
#endif
#ifndef R_OK
# define R_OK 4 // for systems that don't have R_OK in unistd.h
#endif
#define ALLOC_ONE(type) (type *)alloc(sizeof(type))
#define ALLOC_MULT(type, count) (type *)alloc(sizeof(type) * (count))
#define ALLOC_CLEAR_ONE(type) (type *)alloc_clear(sizeof(type))
#define ALLOC_CLEAR_MULT(type, count) (type *)alloc_clear(sizeof(type) * (count))
#define LALLOC_CLEAR_ONE(type) (type *)lalloc_clear(sizeof(type), FALSE)
#define LALLOC_CLEAR_MULT(type, count) (type *)lalloc_clear(sizeof(type) * (count), FALSE)
#define LALLOC_MULT(type, count) (type *)lalloc(sizeof(type) * (count), FALSE)
#ifdef HAVE_MEMSET
# define vim_memset(ptr, c, size) memset((ptr), (c), (size))
#else
void *vim_memset(void *, int, size_t);
#endif
#define CLEAR_FIELD(field) vim_memset(&(field), 0, sizeof(field))
#define CLEAR_POINTER(ptr) vim_memset((ptr), 0, sizeof(*(ptr)))
#define STRLEN(s) strlen((char *)(s))
#define STRCPY(d, s) strcpy((char *)(d), (char *)(s))
#define STRNCPY(d, s, n) strncpy((char *)(d), (char *)(s), (size_t)(n))
#define STRCMP(d, s) strcmp((char *)(d), (char *)(s))
#define STRNCMP(d, s, n) strncmp((char *)(d), (char *)(s), (size_t)(n))
#ifdef HAVE_STRCASECMP
# define STRICMP(d, s) strcasecmp((char *)(d), (char *)(s))
#else
# ifdef HAVE_STRICMP
# define STRICMP(d, s) stricmp((char *)(d), (char *)(s))
# else
# define STRICMP(d, s) vim_stricmp((char *)(d), (char *)(s))
# endif
#endif
#define STRMOVE(d, s) mch_memmove((d), (s), STRLEN(s) + 1)
#ifdef HAVE_STRNCASECMP
# define STRNICMP(d, s, n) strncasecmp((char *)(d), (char *)(s), (size_t)(n))
#else
# ifdef HAVE_STRNICMP
# define STRNICMP(d, s, n) strnicmp((char *)(d), (char *)(s), (size_t)(n))
# else
# define STRNICMP(d, s, n) vim_strnicmp((char *)(d), (char *)(s), (size_t)(n))
# endif
#endif
# define MB_STRICMP(d, s) mb_strnicmp((char_u *)(d), (char_u *)(s), (int)MAXCOL)
# define MB_STRNICMP(d, s, n) mb_strnicmp((char_u *)(d), (char_u *)(s), (int)(n))
#define STRCAT(d, s) strcat((char *)(d), (char *)(s))
#define STRNCAT(d, s, n) strncat((char *)(d), (char *)(s), (size_t)(n))
#ifdef HAVE_STRPBRK
# define vim_strpbrk(s, cs) (char_u *)strpbrk((char *)(s), (char *)(cs))
#endif
#define OUT_STR(s) out_str((char_u *)(s))
#define OUT_STR_NF(s) out_str_nf((char_u *)(s))
#ifdef FEAT_GUI
# ifdef FEAT_TERMGUICOLORS
# define GUI_FUNCTION(f) (gui.in_use ? gui_##f : termgui_##f)
# define GUI_FUNCTION2(f, pixel) (gui.in_use \
? ((pixel) != INVALCOLOR \
? gui_##f((pixel)) \
: INVALCOLOR) \
: termgui_##f((pixel)))
# define USE_24BIT (gui.in_use || p_tgc)
# else
# define GUI_FUNCTION(f) gui_##f
# define GUI_FUNCTION2(f,pixel) ((pixel) != INVALCOLOR \
? gui_##f((pixel)) \
: INVALCOLOR)
# define USE_24BIT gui.in_use
# endif
#else
# ifdef FEAT_TERMGUICOLORS
# define GUI_FUNCTION(f) termgui_##f
# define GUI_FUNCTION2(f, pixel) termgui_##f((pixel))
# define USE_24BIT p_tgc
# endif
#endif
#ifdef FEAT_TERMGUICOLORS
# define IS_CTERM (t_colors > 1 || p_tgc)
#else
# define IS_CTERM (t_colors > 1)
#endif
#ifdef GUI_FUNCTION
# define GUI_MCH_GET_RGB GUI_FUNCTION(mch_get_rgb)
# define GUI_MCH_GET_RGB2(pixel) GUI_FUNCTION2(mch_get_rgb, (pixel))
# define GUI_MCH_GET_COLOR GUI_FUNCTION(mch_get_color)
# define GUI_GET_COLOR GUI_FUNCTION(get_color)
#endif
#ifdef HAVE_STRERROR
# define PERROR(msg) (void)semsg("%s: %s", (char *)msg, strerror(errno))
#else
# define PERROR(msg) do_perror(msg)
#endif
typedef long linenr_T; typedef int colnr_T; typedef unsigned short disptick_T;
#ifdef __MVS__
# define MAXCOL (0x3fffffffL) // maximum column number, 30 bits
# define MAXLNUM (0x3fffffffL) // maximum (invalid) line number
#else
# define MAXCOL INT_MAX // maximum column number
# define MAXLNUM LONG_MAX // maximum (invalid) line number
#endif
#define SHOWCMD_COLS 10 // columns needed by shown command
#define STL_MAX_ITEM 80 // max nr of %<flag> in statusline
typedef void *vim_acl_T;
#ifndef mch_memmove
# define mch_memmove(to, from, len) memmove((char*)(to), (char*)(from), (size_t)(len))
#endif
#define fnamecmp(x, y) vim_fnamecmp((char_u *)(x), (char_u *)(y))
#define fnamencmp(x, y, n) vim_fnamencmp((char_u *)(x), (char_u *)(y), (size_t)(n))
#if defined(UNIX) || defined(FEAT_GUI) || defined(VMS) \
|| defined(FEAT_CLIENTSERVER)
# define USE_INPUT_BUF
#endif
#ifndef EINTR
# define read_eintr(fd, buf, count) vim_read((fd), (buf), (count))
# define write_eintr(fd, buf, count) vim_write((fd), (buf), (count))
#endif
#ifdef MSWIN
# define vim_read(fd, buf, count) read((fd), (char *)(buf), (unsigned int)(count))
# define vim_write(fd, buf, count) write((fd), (char *)(buf), (unsigned int)(count))
#else
# define vim_read(fd, buf, count) read((fd), (char *)(buf), (size_t) (count))
# define vim_write(fd, buf, count) write((fd), (char *)(buf), (size_t) (count))
#endif
#define HL_ATTR(n) highlight_attr[(int)(n)]
#define TERM_STR(n) term_strings[(int)(n)]
#ifndef EXTERN
# define EXTERN extern
# define INIT(x)
# define INIT2(a, b)
# define INIT3(a, b, c)
# define INIT4(a, b, c, d)
# define INIT5(a, b, c, d, e)
# define INIT6(a, b, c, d, e, f)
#else
# ifndef INIT
# define INIT(x) x
# define INIT2(a, b) = {a, b}
# define INIT3(a, b, c) = {a, b, c}
# define INIT4(a, b, c, d) = {a, b, c, d}
# define INIT5(a, b, c, d, e) = {a, b, c, d, e}
# define INIT6(a, b, c, d, e, f) = {a, b, c, d, e, f}
# define DO_INIT
# endif
#endif
#define MAX_MCO 6 // maximum value for 'maxcombine'
#define MB_MAXBYTES 21
#if (defined(FEAT_PROFILE) || defined(FEAT_RELTIME)) && !defined(PROTO)
# ifdef MSWIN
typedef LARGE_INTEGER proftime_T;
# else
typedef struct timeval proftime_T;
# endif
#else
typedef int proftime_T; #endif
#ifdef PROTO
typedef long time_T;
#else
# ifdef MSWIN
typedef __time64_t time_T;
# else
typedef time_t time_T;
# endif
#endif
#ifdef _WIN64
typedef __int64 sock_T;
#else
typedef int sock_T;
#endif
#include "option.h" // options and default values
#include "beval.h" // BalloonEval
#include "structs.h" // defines many structures
#include "alloc.h"
#define PROF_NONE 0 // profiling not started
#define PROF_YES 1 // profiling busy
#define PROF_PAUSED 2 // profiling paused
#define MOUSE_LEFT 0x00
#define MOUSE_MIDDLE 0x01
#define MOUSE_RIGHT 0x02
#define MOUSE_RELEASE 0x03
#define MOUSE_SHIFT 0x04
#define MOUSE_ALT 0x08
#define MOUSE_CTRL 0x10
#define MOUSE_4 0x100 // scroll wheel down
#define MOUSE_5 0x200 // scroll wheel up
#define MOUSE_X1 0x300 // Mouse-button X1 (6th)
#define MOUSE_X2 0x400 // Mouse-button X2
#define MOUSE_6 0x500 // scroll wheel left
#define MOUSE_7 0x600 // scroll wheel right
#define MOUSE_DRAG_XTERM 0x40
#define MOUSE_DRAG (0x40 | MOUSE_RELEASE)
#define MOUSEWHEEL_LOW 0x60
#define MOUSE_CLICK_MASK 0x03
#define NUM_MOUSE_CLICKS(code) \
(((unsigned)((code) & 0xC0) >> 6) + 1)
#define SET_NUM_MOUSE_CLICKS(code, num) \
(code) = ((code) & 0x3f) | ((((num) - 1) & 3) << 6)
#define MOUSE_COLOFF 10000
#define IN_UNKNOWN 0
#define IN_BUFFER 1
#define IN_STATUS_LINE 2 // on status or command line
#define IN_SEP_LINE 4 // on vertical separator line
#define IN_OTHER_WIN 8 // in other window but can't go there
#define CURSOR_MOVED 0x100
#define MOUSE_FOLD_CLOSE 0x200 // clicked on '-' in fold column
#define MOUSE_FOLD_OPEN 0x400 // clicked on '+' in fold column
#define MOUSE_WINBAR 0x800 // in window toolbar
#define MOUSE_FOCUS 0x01 // need to stay in this window
#define MOUSE_MAY_VIS 0x02 // may start Visual mode
#define MOUSE_DID_MOVE 0x04 // only act when mouse has moved
#define MOUSE_SETPOS 0x08 // only set current mouse position
#define MOUSE_MAY_STOP_VIS 0x10 // may stop Visual mode
#define MOUSE_RELEASED 0x20 // button was released
#if defined(UNIX) && defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H)
# define CHECK_DOUBLE_CLICK 1 // Checking for double clicks ourselves.
#endif
#define VALID_PATH 1
#define VALID_HEAD 2
#define VV_COUNT 0
#define VV_COUNT1 1
#define VV_PREVCOUNT 2
#define VV_ERRMSG 3
#define VV_WARNINGMSG 4
#define VV_STATUSMSG 5
#define VV_SHELL_ERROR 6
#define VV_THIS_SESSION 7
#define VV_VERSION 8
#define VV_LNUM 9
#define VV_TERMRESPONSE 10
#define VV_FNAME 11
#define VV_LANG 12
#define VV_LC_TIME 13
#define VV_CTYPE 14
#define VV_CC_FROM 15
#define VV_CC_TO 16
#define VV_FNAME_IN 17
#define VV_FNAME_OUT 18
#define VV_FNAME_NEW 19
#define VV_FNAME_DIFF 20
#define VV_CMDARG 21
#define VV_FOLDSTART 22
#define VV_FOLDEND 23
#define VV_FOLDDASHES 24
#define VV_FOLDLEVEL 25
#define VV_PROGNAME 26
#define VV_SEND_SERVER 27
#define VV_DYING 28
#define VV_EXCEPTION 29
#define VV_THROWPOINT 30
#define VV_REG 31
#define VV_CMDBANG 32
#define VV_INSERTMODE 33
#define VV_VAL 34
#define VV_KEY 35
#define VV_PROFILING 36
#define VV_FCS_REASON 37
#define VV_FCS_CHOICE 38
#define VV_BEVAL_BUFNR 39
#define VV_BEVAL_WINNR 40
#define VV_BEVAL_WINID 41
#define VV_BEVAL_LNUM 42
#define VV_BEVAL_COL 43
#define VV_BEVAL_TEXT 44
#define VV_SCROLLSTART 45
#define VV_SWAPNAME 46
#define VV_SWAPCHOICE 47
#define VV_SWAPCOMMAND 48
#define VV_CHAR 49
#define VV_MOUSE_WIN 50
#define VV_MOUSE_WINID 51
#define VV_MOUSE_LNUM 52
#define VV_MOUSE_COL 53
#define VV_OP 54
#define VV_SEARCHFORWARD 55
#define VV_HLSEARCH 56
#define VV_OLDFILES 57
#define VV_WINDOWID 58
#define VV_PROGPATH 59
#define VV_COMPLETED_ITEM 60
#define VV_OPTION_NEW 61
#define VV_OPTION_OLD 62
#define VV_OPTION_OLDLOCAL 63
#define VV_OPTION_OLDGLOBAL 64
#define VV_OPTION_COMMAND 65
#define VV_OPTION_TYPE 66
#define VV_ERRORS 67
#define VV_FALSE 68
#define VV_TRUE 69
#define VV_NONE 70
#define VV_NULL 71
#define VV_NUMBERSIZE 72
#define VV_VIM_DID_ENTER 73
#define VV_TESTING 74
#define VV_TYPE_NUMBER 75
#define VV_TYPE_STRING 76
#define VV_TYPE_FUNC 77
#define VV_TYPE_LIST 78
#define VV_TYPE_DICT 79
#define VV_TYPE_FLOAT 80
#define VV_TYPE_BOOL 81
#define VV_TYPE_NONE 82
#define VV_TYPE_JOB 83
#define VV_TYPE_CHANNEL 84
#define VV_TYPE_BLOB 85
#define VV_TERMRFGRESP 86
#define VV_TERMRBGRESP 87
#define VV_TERMU7RESP 88
#define VV_TERMSTYLERESP 89
#define VV_TERMBLINKRESP 90
#define VV_EVENT 91
#define VV_VERSIONLONG 92
#define VV_ECHOSPACE 93
#define VV_ARGV 94
#define VV_LEN 95 // number of v: vars
#define VVAL_FALSE 0L // VAR_BOOL
#define VVAL_TRUE 1L // VAR_BOOL
#define VVAL_NONE 2L // VAR_SPECIAL
#define VVAL_NULL 3L // VAR_SPECIAL
#define VAR_TYPE_NUMBER 0
#define VAR_TYPE_STRING 1
#define VAR_TYPE_FUNC 2
#define VAR_TYPE_LIST 3
#define VAR_TYPE_DICT 4
#define VAR_TYPE_FLOAT 5
#define VAR_TYPE_BOOL 6
#define VAR_TYPE_NONE 7
#define VAR_TYPE_JOB 8
#define VAR_TYPE_CHANNEL 9
#define VAR_TYPE_BLOB 10
#define DICT_MAXNEST 100 // maximum nesting of lists and dicts
#ifdef FEAT_CLIPBOARD
# define VIM_ATOM_NAME "_VIM_TEXT"
# define VIMENC_ATOM_NAME "_VIMENC_TEXT"
# define SELECT_CLEARED 0
# define SELECT_IN_PROGRESS 1
# define SELECT_DONE 2
# define SELECT_MODE_CHAR 0
# define SELECT_MODE_WORD 1
# define SELECT_MODE_LINE 2
# ifdef FEAT_GUI_MSWIN
# ifdef FEAT_OLE
# define WM_OLE (WM_APP+0)
# endif
# endif
typedef struct
{
int available; int owned; pos_T start; pos_T end; int vmode;
short_u origin_row;
short_u origin_start_col;
short_u origin_end_col;
short_u word_start_col;
short_u word_end_col;
#ifdef FEAT_PROP_POPUP
short_u min_col;
short_u max_col;
short_u min_row;
short_u max_row;
#endif
pos_T prev; short_u state; short_u mode;
# if defined(FEAT_GUI_X11) || defined(FEAT_XCLIPBOARD)
Atom sel_atom; # endif
# ifdef FEAT_GUI_GTK
GdkAtom gtk_sel_atom; # endif
# if defined(MSWIN) || defined(FEAT_CYGWIN_WIN32_CLIPBOARD)
int_u format; int_u format_raw; # endif
# ifdef FEAT_GUI_HAIKU
# endif
} Clipboard_T;
#else
typedef int Clipboard_T; #endif
#if (defined(_MSC_VER) && (_MSC_VER >= 1300)) || defined(__MINGW32__)
# define HAVE_STAT64
typedef struct _stat64 stat_T;
#else
typedef struct stat stat_T;
#endif
#if defined(__GNUC__) && !defined(__MINGW32__)
# define USE_PRINTF_FORMAT_ATTRIBUTE
#endif
typedef enum
{
ASSERT_EQUAL,
ASSERT_NOTEQUAL,
ASSERT_MATCH,
ASSERT_NOTMATCH,
ASSERT_OTHER
} assert_type_T;
typedef enum {
PASTE_INSERT, PASTE_CMDLINE, PASTE_EX, PASTE_ONE_CHAR } paste_mode_T;
typedef enum {
FLUSH_MINIMAL,
FLUSH_TYPEAHEAD, FLUSH_INPUT } flush_buffers_T;
typedef enum {
USEPOPUP_NONE,
USEPOPUP_NORMAL, USEPOPUP_HIDDEN } use_popup_T;
#define LET_IS_CONST 1 // ":const"
#define LET_NO_COMMAND 2 // "var = expr" without ":let" or ":const"
#include "ex_cmds.h" // Ex command defines
#include "spell.h" // spell checking stuff
#include "proto.h" // function prototypes
#if !defined(MSWIN) && !defined(FEAT_GUI_X11) && !defined(FEAT_GUI_HAIKU) \
&& !defined(FEAT_GUI_GTK) && !defined(FEAT_GUI_MAC) && !defined(PROTO)
# define mch_errmsg(str) fprintf(stderr, "%s", (str))
# define display_errors() fflush(stderr)
# define mch_msg(str) printf("%s", (str))
#else
# define USE_MCH_ERRMSG
#endif
# if defined(FEAT_EVAL) \
&& (!defined(FEAT_GUI_MSWIN) \
|| !(defined(FEAT_MBYTE_IME) || defined(GLOBAL_IME))) \
&& !(defined(FEAT_GUI_MAC) && defined(MACOS_CONVERT))
# define IME_WITHOUT_XIM
#endif
#if defined(FEAT_XIM) \
|| defined(IME_WITHOUT_XIM) \
|| (defined(FEAT_GUI_MSWIN) \
&& (defined(FEAT_MBYTE_IME) || defined(GLOBAL_IME))) \
|| defined(FEAT_GUI_MAC)
# define HAVE_INPUT_METHOD
#endif
#ifndef FEAT_LINEBREAK
# define number_width(x) 7
#endif
#if !defined(MSWIN) && !defined(VMS)
# define mch_open(n, m, p) open((n), (m), (p))
# define mch_fopen(n, p) fopen((n), (p))
#endif
#include "globals.h" // global variables and messages
#if defined(FEAT_GUI_DIALOG) && !defined(FEAT_CON_DIALOG)
# define do_dialog gui_mch_dialog
#endif
#ifdef FEAT_BROWSE
# ifdef BACKSLASH_IN_FILENAME
# define BROWSE_FILTER_MACROS \
(char_u *)N_("Vim macro files (*.vim)\t*.vim\nAll Files (*.*)\t*.*\n")
# define BROWSE_FILTER_ALL_FILES (char_u *)N_("All Files (*.*)\t*.*\n")
# define BROWSE_FILTER_DEFAULT \
(char_u *)N_("All Files (*.*)\t*.*\nC source (*.c, *.h)\t*.c;*.h\nC++ source (*.cpp, *.hpp)\t*.cpp;*.hpp\nVB code (*.bas, *.frm)\t*.bas;*.frm\nVim files (*.vim, _vimrc, _gvimrc)\t*.vim;_vimrc;_gvimrc\n")
# else
# define BROWSE_FILTER_MACROS \
(char_u *)N_("Vim macro files (*.vim)\t*.vim\nAll Files (*)\t*\n")
# define BROWSE_FILTER_ALL_FILES (char_u *)N_("All Files (*)\t*\n")
# define BROWSE_FILTER_DEFAULT \
(char_u *)N_("All Files (*)\t*\nC source (*.c, *.h)\t*.c;*.h\nC++ source (*.cpp, *.hpp)\t*.cpp;*.hpp\nVim files (*.vim, _vimrc, _gvimrc)\t*.vim;_vimrc;_gvimrc\n")
# endif
# define BROWSE_SAVE 1 // flag for do_browse()
# define BROWSE_DIR 2 // flag for do_browse()
#endif
#ifdef _MSC_VER
#pragma warning(disable : 4312)
#pragma warning(disable : 4131)
#pragma warning(disable : 4244)
#pragma warning(disable : 4306)
#pragma warning(disable : 4100)
#pragma warning(disable : 4057)
#pragma warning(disable : 4127)
#pragma warning(disable : 4706)
#endif
#if defined(MEM_PROFILE)
# define vim_realloc(ptr, size) mem_realloc((ptr), (size))
#else
# define vim_realloc(ptr, size) realloc((ptr), (size))
#endif
#define MB_BYTE2LEN(b) mb_bytelen_tab[b]
#define MB_BYTE2LEN_CHECK(b) (((b) < 0 || (b) > 255) ? 1 : mb_bytelen_tab[b])
#define ENC_8BIT 0x01
#define ENC_DBCS 0x02
#define ENC_UNICODE 0x04
#define ENC_ENDIAN_B 0x10 // Unicode: Big endian
#define ENC_ENDIAN_L 0x20 // Unicode: Little endian
#define ENC_2BYTE 0x40 // Unicode: UCS-2
#define ENC_4BYTE 0x80 // Unicode: UCS-4
#define ENC_2WORD 0x100 // Unicode: UTF-16
#define ENC_LATIN1 0x200 // Latin1
#define ENC_LATIN9 0x400 // Latin9
#define ENC_MACROMAN 0x800 // Mac Roman (not Macro Man! :-)
#ifdef USE_ICONV
# ifndef EILSEQ
# define EILSEQ 123
# endif
# ifdef DYNAMIC_ICONV
# define ICONV_ERRNO (*iconv_errno())
# define ICONV_E2BIG 7
# define ICONV_EINVAL 22
# define ICONV_EILSEQ 42
# else
# define ICONV_ERRNO errno
# define ICONV_E2BIG E2BIG
# define ICONV_EINVAL EINVAL
# define ICONV_EILSEQ EILSEQ
# endif
#endif
#define SIGN_BYTE 1 // byte value used where sign is displayed;
#ifdef FEAT_NETBEANS_INTG
# define MULTISIGN_BYTE 2 // byte value used where sign is displayed if
#endif
#if defined(FEAT_GUI) && defined(FEAT_XCLIPBOARD)
# ifdef FEAT_GUI_GTK
# define X_DISPLAY ((gui.in_use) ? gui_mch_get_display() : xterm_dpy)
# else
# define X_DISPLAY (gui.in_use ? gui.dpy : xterm_dpy)
# endif
#else
# ifdef FEAT_GUI
# ifdef FEAT_GUI_GTK
# define X_DISPLAY ((gui.in_use) ? gui_mch_get_display() : (Display *)NULL)
# else
# define X_DISPLAY gui.dpy
# endif
# else
# define X_DISPLAY xterm_dpy
# endif
#endif
#if defined(FEAT_BROWSE) && defined(GTK_CHECK_VERSION)
# if GTK_CHECK_VERSION(2,4,0)
# define USE_FILE_CHOOSER
# endif
#endif
#ifdef FEAT_GUI_GTK
# if !GTK_CHECK_VERSION(2,14,0)
# define gtk_widget_get_window(wid) ((wid)->window)
# define gtk_plug_get_socket_window(wid) ((wid)->socket_window)
# define gtk_selection_data_get_data(sel) ((sel)->data)
# define gtk_selection_data_get_data_type(sel) ((sel)->type)
# define gtk_selection_data_get_format(sel) ((sel)->format)
# define gtk_selection_data_get_length(sel) ((sel)->length)
# define gtk_adjustment_set_lower(adj, low) \
do { (adj)->lower = low; } while (0)
# define gtk_adjustment_set_upper(adj, up) \
do { (adj)->upper = up; } while (0)
# define gtk_adjustment_set_page_size(adj, size) \
do { (adj)->page_size = size; } while (0)
# define gtk_adjustment_set_page_increment(adj, inc) \
do { (adj)->page_increment = inc; } while (0)
# define gtk_adjustment_set_step_increment(adj, inc) \
do { (adj)->step_increment = inc; } while (0)
# endif
# if !GTK_CHECK_VERSION(2,16,0)
# define gtk_selection_data_get_selection(sel) ((sel)->selection)
# endif
# if !GTK_CHECK_VERSION(2,18,0)
# define gtk_widget_get_allocation(wid, alloc) \
do { *(alloc) = (wid)->allocation; } while (0)
# define gtk_widget_set_allocation(wid, alloc) \
do { (wid)->allocation = *(alloc); } while (0)
# define gtk_widget_get_has_window(wid) !GTK_WIDGET_NO_WINDOW(wid)
# define gtk_widget_get_sensitive(wid) GTK_WIDGET_SENSITIVE(wid)
# define gtk_widget_get_visible(wid) GTK_WIDGET_VISIBLE(wid)
# define gtk_widget_has_focus(wid) GTK_WIDGET_HAS_FOCUS(wid)
# define gtk_widget_set_window(wid, win) \
do { (wid)->window = (win); } while (0)
# define gtk_widget_set_can_default(wid, can) \
do { if (can) { GTK_WIDGET_SET_FLAGS(wid, GTK_CAN_DEFAULT); } \
else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_CAN_DEFAULT); } } while (0)
# define gtk_widget_set_can_focus(wid, can) \
do { if (can) { GTK_WIDGET_SET_FLAGS(wid, GTK_CAN_FOCUS); } \
else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_CAN_FOCUS); } } while (0)
# define gtk_widget_set_visible(wid, vis) \
do { if (vis) { gtk_widget_show(wid); } \
else { gtk_widget_hide(wid); } } while (0)
# endif
# if !GTK_CHECK_VERSION(2,20,0)
# define gtk_widget_get_mapped(wid) GTK_WIDGET_MAPPED(wid)
# define gtk_widget_get_realized(wid) GTK_WIDGET_REALIZED(wid)
# define gtk_widget_set_mapped(wid, map) \
do { if (map) { GTK_WIDGET_SET_FLAGS(wid, GTK_MAPPED); } \
else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_MAPPED); } } while (0)
# define gtk_widget_set_realized(wid, rea) \
do { if (rea) { GTK_WIDGET_SET_FLAGS(wid, GTK_REALIZED); } \
else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_REALIZED); } } while (0)
# endif
#endif
#ifndef FEAT_NETBEANS_INTG
# undef NBDEBUG
#endif
#ifdef NBDEBUG // Netbeans debugging.
# include "nbdebug.h"
#else
# define nbdebug(a)
#endif
#ifdef IN_PERL_FILE
# undef NORMAL
# undef STRLEN
# undef FF
# undef OP_DELETE
# undef OP_JOIN
# ifdef MAX
# undef MAX
# endif
# ifdef MIN
# undef MIN
# endif
# ifdef _
# undef _
# endif
# ifdef DEBUG
# undef DEBUG
# endif
# ifdef _DEBUG
# undef _DEBUG
# endif
# ifdef instr
# undef instr
# endif
# if (defined(MACOS_X) && !defined(MAC_OS_X_VERSION_10_6)) \
&& defined(bool) && !defined(FEAT_PERL)
# undef bool
# endif
#endif
#define SIGNAL_BLOCK -1
#define SIGNAL_UNBLOCK -2
#if !defined(UNIX) && !defined(VMS)
# define vim_handle_signal(x) 0
#endif
#define VGR_GLOBAL 1
#define VGR_NOJUMP 2
#define BAD_REPLACE '?' // replace it with '?' (default)
#define BAD_KEEP -1 // leave it
#define BAD_DROP -2 // erase it
#define DOSO_NONE 0
#define DOSO_VIMRC 1 // loading vimrc file
#define DOSO_GVIMRC 2 // loading gvimrc file
#define VIF_WANT_INFO 1 // load non-mark info
#define VIF_WANT_MARKS 2 // load file marks
#define VIF_FORCEIT 4 // overwrite info already read
#define VIF_GET_OLDFILES 8 // load v:oldfiles
#define BFA_DEL 1 // buffer is going to be deleted
#define BFA_WIPE 2 // buffer is going to be wiped out
#define BFA_KEEP_UNDO 4 // do not free undo information
#define BFA_IGNORE_ABORT 8 // do not abort for aborting()
#define MSCR_DOWN 0 // DOWN must be FALSE
#define MSCR_UP 1
#define MSCR_LEFT -1
#define MSCR_RIGHT -2
#define KEYLEN_PART_KEY -1 // keylen value for incomplete key-code
#define KEYLEN_PART_MAP -2 // keylen value for incomplete mapping
#define KEYLEN_REMOVED 9999 // keylen value for removed sequence
#define FILEINFO_OK 0
#define FILEINFO_ENC_FAIL 1 // enc_to_utf16() failed
#define FILEINFO_READ_FAIL 2 // CreateFile() failed
#define FILEINFO_INFO_FAIL 3 // GetFileInformationByHandle() failed
#define SOPT_BOOL 0x01 // Boolean option
#define SOPT_NUM 0x02 // Number option
#define SOPT_STRING 0x04 // String option
#define SOPT_GLOBAL 0x08 // Option has global value
#define SOPT_WIN 0x10 // Option has window-local value
#define SOPT_BUF 0x20 // Option has buffer-local value
#define SOPT_UNSET 0x40 // Option does not have local value set
#define SREQ_GLOBAL 0 // Request global option
#define SREQ_WIN 1 // Request window-local option
#define SREQ_BUF 2 // Request buffer-local option
#define GREG_NO_EXPR 1 // Do not allow expression register
#define GREG_EXPR_SRC 2 // Return expression itself for "=" register
#define GREG_LIST 4 // Return list
#define AUTOLOAD_CHAR '#'
#ifdef FEAT_JOB_CHANNEL
# define MAX_OPEN_CHANNELS 10
#else
# define MAX_OPEN_CHANNELS 0
#endif
#if defined(MSWIN)
# define MAX_NAMED_PIPE_SIZE 65535
#endif
#define JSON_JS 1 // use JS instead of JSON
#define JSON_NO_NONE 2 // v:none item not allowed
#define JSON_NL 4 // append a NL
#define DIP_ALL 0x01 // all matches, not just the first one
#define DIP_DIR 0x02 // find directories instead of files.
#define DIP_ERR 0x04 // give an error message when none found.
#define DIP_START 0x08 // also use "start" directory in 'packpath'
#define DIP_OPT 0x10 // also use "opt" directory in 'packpath'
#define DIP_NORTP 0x20 // do not use 'runtimepath'
#define DIP_NOAFTER 0x40 // skip "after" directories
#define DIP_AFTER 0x80 // only use "after" directories
#define LOWEST_WIN_ID 1000
#define COPYID_INC 2
#define COPYID_MASK (~0x1)
#define TFN_INT 1 // internal function name OK
#define TFN_QUIET 2 // no error messages
#define TFN_NO_AUTOLOAD 4 // do not use script autoloading
#define TFN_NO_DEREF 8 // do not dereference a Funcref
#define TFN_READ_ONLY 16 // will not change the var
#define GLV_QUIET TFN_QUIET // no error messages
#define GLV_NO_AUTOLOAD TFN_NO_AUTOLOAD // do not use script autoloading
#define GLV_READ_ONLY TFN_READ_ONLY // will not change the var
#define DO_NOT_FREE_CNT 99999 // refcount for dict or list that should not
#define FCERR_UNKNOWN 0
#define FCERR_TOOMANY 1
#define FCERR_TOOFEW 2
#define FCERR_SCRIPT 3
#define FCERR_DICT 4
#define FCERR_NONE 5
#define FCERR_OTHER 6
#define FCERR_DELETED 7
#define FCERR_NOTMETHOD 8 // function cannot be used as a method
#define FLEN_FIXED 40
#define FNE_INCL_BR 1 // include [] in name
#define FNE_CHECK_START 2 // check name starts with valid character
#if (defined(SUN_SYSTEM) || defined(BSD) || defined(__FreeBSD_kernel__)) \
&& (defined(S_ISCHR) || defined(S_IFCHR))
# define OPEN_CHR_FILES
#endif
#ifndef S_ISDIR
# ifdef S_IFDIR
# define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
# else
# define S_ISDIR(m) 0
# endif
#endif
#ifndef S_ISREG
# ifdef S_IFREG
# define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
# else
# define S_ISREG(m) 0
# endif
#endif
#ifndef S_ISBLK
# ifdef S_IFBLK
# define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK)
# else
# define S_ISBLK(m) 0
# endif
#endif
#ifndef S_ISSOCK
# ifdef S_IFSOCK
# define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK)
# else
# define S_ISSOCK(m) 0
# endif
#endif
#ifndef S_ISFIFO
# ifdef S_IFIFO
# define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO)
# else
# define S_ISFIFO(m) 0
# endif
#endif
#ifndef S_ISCHR
# ifdef S_IFCHR
# define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR)
# else
# define S_ISCHR(m) 0
# endif
#endif
#ifndef S_ISLNK
# ifdef S_IFLNK
# define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK)
# else
# define S_ISLNK(m) 0
# endif
#endif
#if defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H)
# define ELAPSED_TIMEVAL
# define ELAPSED_INIT(v) gettimeofday(&v, NULL)
# define ELAPSED_FUNC(v) elapsed(&v)
typedef struct timeval elapsed_T;
long elapsed(struct timeval *start_tv);
#elif defined(MSWIN)
# define ELAPSED_TICKCOUNT
# define ELAPSED_INIT(v) v = GetTickCount()
# define ELAPSED_FUNC(v) elapsed(v)
# ifdef PROTO
typedef int DWORD;
# endif
typedef DWORD elapsed_T;
# ifndef PROTO
long elapsed(DWORD start_tick);
# endif
#endif
#define REPLACE_CR_NCHAR -1
#define REPLACE_NL_NCHAR -2
#define TERM_START_NOJOB 1
#define TERM_START_FORCEIT 2
#define TERM_START_SYSTEM 4
#define SAVE_RESTORE_TITLE 1
#define SAVE_RESTORE_ICON 2
#define SAVE_RESTORE_BOTH (SAVE_RESTORE_TITLE | SAVE_RESTORE_ICON)
#define APC_SAVE_FOR_UNDO 1 // call u_savesub() before making changes
#define APC_SUBSTITUTE 2 // text is replaced, not inserted
#define CLIP_ZINDEX 32000
#define REPTERM_FROM_PART 1
#define REPTERM_DO_LT 2
#define REPTERM_SPECIAL 4
#define REPTERM_NO_SIMPLIFY 8
#define EVAL_EVALUATE 1 // when missing don't actually evaluate
#define EVAL_CONSTANT 2 // when not a constant return FAIL
#endif // VIM__H