/* * ntp.h - NTP definitions for the masses */ #ifndef NTP_H #define NTP_H #include "ntp_types.h" #include <math.h> /* * How to get signed characters. On machines where signed char works, * use it. On machines where signed char doesn't work, char had better * be signed. */ #ifdef NEED_S_CHAR_TYPEDEF # if SIZEOF_SIGNED_CHAR typedef signed char s_char; # else typedef char s_char; # endif /* XXX: Why is this sequent bit INSIDE this test? */ # ifdef sequent # undef SO_RCVBUF # undef SO_SNDBUF # endif #endif #ifndef TRUE # define TRUE 1 #endif /* TRUE */ #ifndef FALSE # define FALSE 0 #endif /* FALSE */ /* * NTP protocol parameters. See section 3.2.6 of the specification. */ #define NTP_VERSION ((u_char)4) /* current version number */ #define NTP_OLDVERSION ((u_char)1) /* oldest credible version */ #define NTP_PORT 123 /* included for sake of non-unix machines */ #define NTP_MAXSTRATUM ((u_char)15) /* max stratum, infinity a la Bellman-Ford */ #define NTP_MAXAGE 86400 /* one day in seconds */ #define NTP_UNREACH 16 /* poll interval backoff count */ #define NTP_MINDPOLL 6 /* log2 default min poll interval (64 s) */ #define NTP_MAXDPOLL 10 /* log2 default max poll interval (~17 m) */ #define NTP_MINPOLL 4 /* log2 min poll interval (16 s) */ #define NTP_MAXPOLL 17 /* log2 max poll interval (~4.5 h) */ #define NTP_MINCLOCK 3 /* minimum survivors */ #define NTP_CANCLOCK 6 /* minimum candidates */ #define NTP_MAXCLOCK 10 /* maximum candidates */ #define NTP_WINDOW 8 /* reachability register size */ #define NTP_SHIFT 8 /* 8 suitable for crystal time base */ #define NTP_MAXKEY 65535 /* maximum authentication key number */ #define NTP_MAXSESSION 100 /* maximum entries on session key list */ #define NTP_AUTOMAX 12 /* log2 default max session key lifetime */ #define KEY_REVOKE 16 /* log2 default key revoke timeout */ #define NTP_FWEIGHT .5 /* clock filter weight */ #define NTP_SWEIGHT .75 /* select weight */ #define CLOCK_SGATE 10. /* popcorn spike gate */ #define BURST_INTERVAL1 4 /* first interburst interval (log2) */ #define BURST_INTERVAL2 1 /* succeeding interburst intervals (log2) */ /* * Operations for jitter (variance) calculations (these use doubles). * Note that we carefully separate the jitter component from the dispersion * component (frequency error plus precision). The frequency error * component is computed as CLOCK_PHI times the difference between the epoch * of the time measurement and the reference time. The precision componen * is computed as the square root of the mean of the squares of a zero- * mean, uniform distribution of unit maximum amplitude. Whether this * makes statistical sense may be arguable. */ #define SQUARE(x) ((x) * (x)) #define SQRT(x) (sqrt(x)) #define DIFF(x, y) (SQUARE((x) - (y))) #define LOGTOD(a) ((a) < 0 ? 1. / (1L << -(a)) : \ 1L << (int)(a)) /* log2 to double */ #define UNIVAR(x) (SQUARE(.28867513 * LOGTOD(x))) /* std uniform distr */ #define ULOGTOD(a) (1L << (int)(a)) /* ulog2 to double */ #define MAXDISPERSE 16. /* max dispersion (square) */ #define MINDISPERSE .01 /* min dispersion */ #define MAXDISTANCE 1. /* max root distance */ /* * Loop filter parameters. See section 5.1 of the specification. * * Note that these are appropriate for a crystal time base. If your * system clock is line frequency controlled you should read the * specification for appropriate modifications. */ #define CLOCK_PHI 15e-6 /* max frequency wander */ #define EVENT_TIMEOUT 0 /* one second, that is */ /* * The interface structure is used to hold the addresses and socket * numbers of each of the interfaces we are using. */ struct interface { int fd; /* socket this is opened on */ int bfd; /* socket for receiving broadcasts */ struct sockaddr_in sin; /* interface address */ struct sockaddr_in bcast; /* broadcast address */ struct sockaddr_in mask; /* interface mask */ char name[8]; /* name of interface */ int flags; /* interface flags */ int last_ttl; /* last TTL specified */ volatile long received; /* number of incoming packets */ long sent; /* number of outgoing packets */ long notsent; /* number of send failures */ }; /* * Flags for interfaces */ #define INT_BROADCAST 1 /* can broadcast out this interface */ #define INT_BCASTOPEN 2 /* broadcast socket is open */ #define INT_LOOPBACK 4 /* the loopback interface */ #define INT_MULTICAST 8 /* multicasting enabled */ /* * Define flasher bits (tests 1 through 8 in packet procedure) * These reveal the state at the last grumble from the peer and are * most handy for diagnosing problems, even if not strictly a state * variable in the spec. These are recorded in the peer structure. */ #define TEST1 0x0001 /* duplicate packet received */ #define TEST2 0x0002 /* bogus packet received */ #define TEST3 0x0004 /* protocol unsynchronized */ #define TEST4 0x0008 /* peer delay/dispersion bounds check */ #define TEST5 0x0010 /* peer authentication failed */ #define TEST6 0x0020 /* peer clock unsynchronized */ #define TEST7 0x0040 /* peer stratum out of bounds */ #define TEST8 0x0080 /* root delay/dispersion bounds check */ #define TEST9 0x0100 /* peer not authenticated */ #define TEST10 0x0200 /* access denied */ /* * The peer structure. Holds state information relating to the guys * we are peering with. Most of this stuff is from section 3.2 of the * spec. */ struct peer { struct peer *next; struct peer *ass_next; /* link pointer in associd hash */ struct sockaddr_in srcadr; /* address of remote host */ struct interface *dstadr; /* pointer to address on local host */ struct refclockproc *procptr; /* pointer to reference clock stuff */ u_char leap; /* leap indicator */ u_char hmode; /* association mode with this peer */ u_char pmode; /* peer's association mode */ u_char stratum; /* stratum of remote peer */ s_char precision; /* peer's clock precision */ u_char ppoll; /* peer poll interval */ u_char hpoll; /* local host poll interval */ u_char minpoll; /* min local host poll interval */ u_char maxpoll; /* max local host poll interval */ u_char burst; /* packets remaining in burst */ u_char version; /* version number */ u_int flags; /* peer flags */ u_char cast_flags; /* flags MDF_?CAST */ u_int flash; /* protocol error tally bits */ u_char refclktype; /* reference clock type */ u_char refclkunit; /* reference clock unit number */ u_char sstclktype; /* clock type for system status word */ u_int32 refid; /* peer reference ID */ l_fp reftime; /* update epoch */ u_long keyid; /* current key ID */ u_long pkeyid; /* previous key ID (autokey) */ u_long *keylist; /* session key identifier list */ int keynumber; /* session key identifier number */ u_short associd; /* association ID, a unique integer */ u_char ttl; /* time to live (multicast) */ /* **Start of clear-to-zero area.*** */ /* Everything that is cleared to zero goes below here */ u_char valid; /* valid counter */ #define clear_to_zero valid double estbdelay; /* broadcast offset */ u_char status; /* peer status */ u_char pollsw; /* what it says */ u_char reach; /* reachability, NTP_WINDOW bits */ u_char unreach; /* unreachable count */ u_short filter_nextpt; /* index into filter shift register */ double filter_delay[NTP_SHIFT]; /* delay part of shift register */ double filter_offset[NTP_SHIFT]; /* offset part of shift register */ double filter_disp[NTP_SHIFT]; /* dispersion part of shift register */ u_long filter_epoch[NTP_SHIFT]; /* epoch part of shift register */ u_char filter_order[NTP_SHIFT]; /* we keep the filter sorted here */ l_fp org; /* originate time stamp */ l_fp rec; /* receive time stamp */ l_fp xmt; /* transmit time stamp */ double offset; /* peer clock offset */ double delay; /* peer roundtrip delay */ double variance; /* peer variance (jitter) */ double disp; /* peer dispersion */ double rootdelay; /* roundtrip delay to primary clock */ double rootdispersion; /* dispersion to primary clock */ u_long epoch; /* reference epoch */ /* ***End of clear-to-zero area.*** */ /* Everything that is cleared to zero goes above here */ u_long update; /* receive epoch */ #define end_clear_to_zero update u_long outdate; /* send time last packet */ u_long nextdate; /* send time next packet */ u_long nextaction; /* peer local activity timeout (refclocks mainly) */ void (*action) P((struct peer *));/* action timeout function */ /* * statistic counters */ u_long timereset; /* time stat counters were reset */ u_long sent; /* number of updates sent */ u_long received; /* number of frames received */ u_long timereceived; /* last time a frame received */ u_long timereachable; /* last reachable/unreachable event */ u_long processed; /* processed by the protocol */ u_long badauth; /* bad credentials detected */ u_long bogusorg; /* rejected due to bogus origin */ u_long oldpkt; /* rejected as duplicate packet */ u_long seldisptoolarge; /* too much dispersion for selection */ u_long selbroken; /* broken NTP detected in selection */ u_long seltooold; /* too long since sync in selection */ u_char last_event; /* set to code for last peer error */ u_char num_events; /* num. of events which have occurred */ }; /* * Values for peer.leap, sys_leap */ #define LEAP_NOWARNING 0x0 /* normal, no leap second warning */ #define LEAP_ADDSECOND 0x1 /* last minute of day has 61 seconds */ #define LEAP_DELSECOND 0x2 /* last minute of day has 59 seconds */ #define LEAP_NOTINSYNC 0x3 /* overload, clock is free running */ /* * Values for peer.mode */ #define MODE_UNSPEC 0 /* unspecified (probably old NTP version) */ #define MODE_ACTIVE 1 /* symmetric active */ #define MODE_PASSIVE 2 /* symmetric passive */ #define MODE_CLIENT 3 /* client mode */ #define MODE_SERVER 4 /* server mode */ #define MODE_BROADCAST 5 /* broadcast mode */ #define MODE_CONTROL 6 /* control mode packet */ #define MODE_PRIVATE 7 /* implementation defined function */ #define MODE_BCLIENT 8 /* a pseudo mode, used internally */ #define MODE_MCLIENT 9 /* multicast mode, used internally */ /* * Values for peer.stratum, sys_stratum */ #define STRATUM_REFCLOCK ((u_char)0) /* stratum claimed by primary clock */ #define STRATUM_PRIMARY ((u_char)1) /* host has a primary clock */ #define STRATUM_INFIN ((u_char)NTP_MAXSTRATUM) /* infinity a la Bellman-Ford */ /* A stratum of 0 in the packet is mapped to 16 internally */ #define STRATUM_PKT_UNSPEC ((u_char)0) /* unspecified in packet */ #define STRATUM_UNSPEC ((u_char)(NTP_MAXSTRATUM+(u_char)1)) /* unspecified */ /* * Values for peer.flags */ #define FLAG_CONFIG 0x1 /* association was configured */ #define FLAG_AUTHENABLE 0x2 /* this guy needs authentication */ #define FLAG_MCAST1 0x4 /* multicast client/server mode */ #define FLAG_MCAST2 0x8 /* multicast client mode */ #define FLAG_AUTHENTIC 0x10 /* last message was authentic */ #define FLAG_REFCLOCK 0x20 /* this is actually a reference clock */ #define FLAG_SYSPEER 0x40 /* this is one of the selected peers */ #define FLAG_PREFER 0x80 /* this is the preferred peer */ #define FLAG_BURST 0x100 /* burst mode */ #define FLAG_SKEY 0x200 /* autokey authentication */ /* * Definitions for the clear() routine. We use memset() to clear * the parts of the peer structure which go to zero. These are * used to calculate the start address and length of the area. */ #define CLEAR_TO_ZERO(p) ((char *)&((p)->clear_to_zero)) #define END_CLEAR_TO_ZERO(p) ((char *)&((p)->end_clear_to_zero)) #define LEN_CLEAR_TO_ZERO (END_CLEAR_TO_ZERO((struct peer *)0) \ - CLEAR_TO_ZERO((struct peer *)0)) /* * Reference clock identifiers (for pps signal) */ #define PPSREFID (u_int32)"PPS " /* used when pps controls stratum>1 */ /* * Reference clock types. Added as necessary. */ #define REFCLK_NONE 0 /* unknown or missing */ #define REFCLK_LOCALCLOCK 1 /* external (e.g., lockclock) */ #define REFCLK_GPS_TRAK 2 /* TRAK 8810 GPS Receiver */ #define REFCLK_WWV_PST 3 /* PST/Traconex 1020 WWV/H */ #define REFCLK_WWVB_SPECTRACOM 4 /* Spectracom 8170/Netclock WWVB */ #define REFCLK_TRUETIME 5 /* TrueTime (generic) Receivers */ #define REFCLK_IRIG_AUDIO 6 /* IRIG-B audio decoder */ #define REFCLK_CHU 7 /* scratchbuilt CHU (Canada) */ #define REFCLK_PARSE 8 /* generic driver (usually DCF77,GPS,MSF) */ #define REFCLK_GPS_MX4200 9 /* Magnavox MX4200 GPS */ #define REFCLK_GPS_AS2201 10 /* Austron 2201A GPS */ #define REFCLK_GPS_ARBITER 11 /* Arbiter 1088A/B/ GPS */ #define REFCLK_IRIG_TPRO 12 /* KSI/Odetics TPRO-S IRIG */ #define REFCLK_ATOM_LEITCH 13 /* Leitch CSD 5300 Master Clock */ #define REFCLK_MSF_EES 14 /* EES M201 MSF Receiver */ #define REFCLK_GPSTM_TRUE 15 /* OLD TrueTime GPS/TM-TMD Receiver */ #define REFCLK_IRIG_BANCOMM 16 /* Bancomm GPS/IRIG Interface */ #define REFCLK_GPS_DATUM 17 /* Datum Programmable Time System */ #define REFCLK_NIST_ACTS 18 /* NIST Auto Computer Time Service */ #define REFCLK_WWV_HEATH 19 /* Heath GC1000 WWV/WWVH Receiver */ #define REFCLK_GPS_NMEA 20 /* NMEA based GPS clock */ #define REFCLK_GPS_VME 21 /* TrueTime GPS-VME Interface */ #define REFCLK_ATOM_PPS 22 /* 1-PPS Clock Discipline */ #define REFCLK_PTB_ACTS 23 /* PTB Auto Computer Time Service */ #define REFCLK_USNO 24 /* Naval Observatory dialup */ #define REFCLK_GPS_HP 26 /* HP 58503A Time/Frequency Receiver */ #define REFCLK_ARCRON_MSF 27 /* ARCRON MSF radio clock. */ #define REFCLK_SHM 28 /* clock attached thru shared memory */ #define REFCLK_PALISADE 29 /* Trimble Navigation Palisade GPS */ #define REFCLK_ONCORE 30 /* Motorola UT Oncore GPS */ #define REFCLK_GPS_JUPITER 31 /* Rockwell Jupiter GPS receiver */ #define REFCLK_CHRONOLOG 32 /* Chrono-log K WWVB receiver */ #define REFCLK_DUMBCLOCK 33 /* Dumb localtime clock */ #define REFCLK_MAX 33 /* Grow as needed... */ /* * We tell reference clocks from real peers by giving the reference * clocks an address of the form 127.127.t.u, where t is the type and * u is the unit number. We define some of this here since we will need * some sanity checks to make sure this address isn't interpretted as * that of a normal peer. */ #define REFCLOCK_ADDR 0x7f7f0000 /* 127.127.0.0 */ #define REFCLOCK_MASK 0xffff0000 /* 255.255.0.0 */ #define ISREFCLOCKADR(srcadr) ((SRCADR(srcadr) & REFCLOCK_MASK) \ == REFCLOCK_ADDR) /* * Macro for checking for invalid addresses. This is really, really * gross, but is needed so no one configures a host on net 127 now that * we're encouraging it the the configuration file. */ #define LOOPBACKADR 0x7f000001 #define LOOPNETMASK 0xff000000 #define ISBADADR(srcadr) (((SRCADR(srcadr) & LOOPNETMASK) \ == (LOOPBACKADR & LOOPNETMASK)) \ && (SRCADR(srcadr) != LOOPBACKADR)) /* * Utilities for manipulating addresses and port numbers */ #define NSRCADR(src) ((src)->sin_addr.s_addr) /* address in net byte order */ #define NSRCPORT(src) ((src)->sin_port) /* port in net byte order */ #define SRCADR(src) (ntohl(NSRCADR((src)))) /* address in host byte order */ #define SRCPORT(src) (ntohs(NSRCPORT((src)))) /* host port */ /* * NTP packet format. The mac field is optional. It isn't really * an l_fp either, but for now declaring it that way is convenient. * See Appendix A in the specification. * * Note that all u_fp and l_fp values arrive in network byte order * and must be converted (except the mac, which isn't, really). */ struct pkt { u_char li_vn_mode; /* contains leap indicator, version and mode */ u_char stratum; /* peer's stratum */ u_char ppoll; /* the peer polling interval */ s_char precision; /* peer clock precision */ u_fp rootdelay; /* distance to primary clock */ u_fp rootdispersion; /* clock dispersion */ u_int32 refid; /* reference clock ID */ l_fp reftime; /* time peer clock was last updated */ l_fp org; /* originate time stamp */ l_fp rec; /* receive time stamp */ l_fp xmt; /* transmit time stamp */ #define MIN_MAC_LEN (sizeof(u_int32) + 8) /* DES */ #define MAX_MAC_LEN (sizeof(u_int32) + 16) /* MD5 */ /* * The length of the packet less MAC must be a multiple of 64 * bits. For normal private-key cryptography, the cryptosum * covers only the raw NTP header. For autokey cryptography, * the heade is incresed by 64 bits to contain the field length * and private value. */ u_int32 keyid1; /* key identifier 1 */ u_int32 keyid2; /* key identifier 2 */ u_int32 keyid3; /* key identifier 3 */ u_char mac[MAX_MAC_LEN]; /* mac */ }; /* * Packets can come in two flavours, one with a mac and one without. */ #define LEN_PKT_NOMAC (sizeof(struct pkt) - MAX_MAC_LEN - 3 * sizeof(u_int32)) /* * Minimum size of packet with a MAC: has to include at least a key number. */ #define LEN_PKT_MAC (LEN_PKT_NOMAC + sizeof(u_int32)) /* * Stuff for extracting things from li_vn_mode */ #define PKT_MODE(li_vn_mode) ((u_char)((li_vn_mode) & 0x7)) #define PKT_VERSION(li_vn_mode) ((u_char)(((li_vn_mode) >> 3) & 0x7)) #define PKT_LEAP(li_vn_mode) ((u_char)(((li_vn_mode) >> 6) & 0x3)) /* * Stuff for putting things back into li_vn_mode */ #define PKT_LI_VN_MODE(li, vn, md) \ ((u_char)((((li) << 6) & 0xc0) | (((vn) << 3) & 0x38) | ((md) & 0x7))) /* * Dealing with stratum. 0 gets mapped to 16 incoming, and back to 0 * on output. */ #define PKT_TO_STRATUM(s) ((u_char)(((s) == (STRATUM_PKT_UNSPEC)) ?\ (STRATUM_UNSPEC) : (s))) #define STRATUM_TO_PKT(s) ((u_char)(((s) == (STRATUM_UNSPEC)) ?\ (STRATUM_PKT_UNSPEC) : (s))) /* * Event codes. Used for reporting errors/events to the control module */ #define PEER_EVENT 0x80 /* this is a peer event */ #define EVNT_UNSPEC 0 #define EVNT_SYSRESTART 1 #define EVNT_SYSFAULT 2 #define EVNT_SYNCCHG 3 #define EVNT_PEERSTCHG 4 #define EVNT_CLOCKRESET 5 #define EVNT_BADDATETIM 6 #define EVNT_CLOCKEXCPT 7 #define EVNT_PEERIPERR (1|PEER_EVENT) #define EVNT_PEERAUTH (2|PEER_EVENT) #define EVNT_UNREACH (3|PEER_EVENT) #define EVNT_REACH (4|PEER_EVENT) #define EVNT_PEERCLOCK (5|PEER_EVENT) /* * Clock event codes */ #define CEVNT_NOMINAL 0 #define CEVNT_TIMEOUT 1 #define CEVNT_BADREPLY 2 #define CEVNT_FAULT 3 #define CEVNT_PROP 4 #define CEVNT_BADDATE 5 #define CEVNT_BADTIME 6 #define CEVNT_MAX CEVNT_BADTIME /* * Very misplaced value. Default port through which we send traps. */ #define TRAPPORT 18447 /* * To speed lookups, peers are hashed by the low order bits of the remote * IP address. These definitions relate to that. */ #define HASH_SIZE 32 #define HASH_MASK (HASH_SIZE-1) #define HASH_ADDR(src) ((SRCADR((src))^(SRCADR((src))>>8)) & HASH_MASK) /* * How we randomize polls. The poll interval is a power of two. * We chose a random value which is between 1/4 and 3/4 of the * poll interval we would normally use and which is an even multiple * of the EVENT_TIMEOUT. The random number routine, given an argument * spread value of n, returns an integer between 0 and (1<<n)-1. This * is shifted by EVENT_TIMEOUT and added to the base value. */ #if defined(HAVE_MRAND48) #define RANDOM (mrand48()) #define SRANDOM(x) (srand48(x)) #elif defined(HAVE_RANDOM) #define RANDOM (random()) #define SRANDOM(x) (srandom(x)) #else #define RANDOM (0) #define SRANDOM(x) (0) #endif #define RANDPOLL(x) ((1 << (x)) - 1 + (RANDOM & 0x3)) #define RANDOM_SPREAD(poll) ((poll) - (EVENT_TIMEOUT+1)) #define RANDOM_POLL(poll, rval) ((((rval)+1)<<EVENT_TIMEOUT) + (1<<((poll)-2))) /* * min, min3 and max. Makes it easier to transliterate the spec without * thinking about it. */ #define min(a,b) (((a) < (b)) ? (a) : (b)) #define max(a,b) (((a) > (b)) ? (a) : (b)) #define min3(a,b,c) min(min((a),(b)), (c)) /* * Configuration items. These are for the protocol module (proto_config()) */ #define PROTO_BROADCLIENT 1 #define PROTO_PRECISION 2 /* (not used) */ #define PROTO_AUTHENTICATE 3 #define PROTO_BROADDELAY 4 #define PROTO_AUTHDELAY 5 /* (not used) */ #define PROTO_MULTICAST_ADD 6 #define PROTO_MULTICAST_DEL 7 #define PROTO_NTP 8 #define PROTO_KERNEL 9 #define PROTO_MONITOR 10 #define PROTO_FILEGEN 11 /* * Configuration items for the loop filter */ #define LOOP_DRIFTINIT 1 /* set initial frequency offset */ #define LOOP_DRIFTCOMP 2 /* set frequency offset */ #define LOOP_PPSDELAY 3 /* set pps delay */ #define LOOP_PPSBAUD 4 /* set pps baud rate */ /* * Configuration items for the stats printer */ #define STATS_FREQ_FILE 1 /* configure drift file */ #define STATS_STATSDIR 2 /* directory prefix for stats files */ #define STATS_PID_FILE 3 /* configure ntpd PID file */ #define MJD_1970 40587 /* MJD for 1 Jan 1970 */ /* * Default parameters. We use these in the absence of something better. */ #define DEFBROADDELAY 4e-3 /* default broadcast offset */ #define INADDR_NTP 0xe0000101 /* NTP multicast address 224.0.1.1 */ /* * Structure used optionally for monitoring when this is turned on. */ struct mon_data { struct mon_data *hash_next; /* next structure in hash list */ struct mon_data *mru_next; /* next structure in MRU list */ struct mon_data *mru_prev; /* previous structure in MRU list */ struct mon_data *fifo_next; /* next structure in FIFO list */ struct mon_data *fifo_prev; /* previous structure in FIFO list */ u_long lastdrop; /* last time dropped due to RES_LIMIT*/ u_long lasttime; /* last time data updated */ u_long firsttime; /* time structure initialized */ u_long count; /* count we have seen */ u_int32 rmtadr; /* address of remote host */ struct interface *interface; /* interface on which this arrived */ u_short rmtport; /* remote port last came from */ u_char mode; /* mode of incoming packet */ u_char version; /* version of incoming packet */ u_char cast_flags; /* flags MDF_?CAST */ }; #define MDF_UCAST 0x1 /* unicast packet */ #define MDF_MCAST 0x2 /* multicast packet */ #define MDF_BCAST 0x4 /* broadcast packet */ #define MDF_LCAST 0x8 /* local packet */ #define MDF_ACAST 0x10 /* manycast packet */ /* * Values used with mon_enabled to indicate reason for enabling monitoring */ #define MON_OFF 0x00 /* no monitoring */ #define MON_ON 0x01 /* monitoring explicitly enabled */ #define MON_RES 0x02 /* implicit monitoring for RES_LIMITED */ /* * Structure used for restrictlist entries */ struct restrictlist { struct restrictlist *next; /* link to next entry */ u_int32 addr; /* host address (host byte order) */ u_int32 mask; /* mask for address (host byte order) */ u_long count; /* number of packets matched */ u_short flags; /* accesslist flags */ u_short mflags; /* match flags */ }; /* * Access flags */ #define RES_IGNORE 0x1 /* ignore if matched */ #define RES_DONTSERVE 0x2 /* don't give him any time */ #define RES_DONTTRUST 0x4 /* don't trust if matched */ #define RES_NOQUERY 0x8 /* don't allow queries if matched */ #define RES_NOMODIFY 0x10 /* don't allow him to modify server */ #define RES_NOPEER 0x20 /* don't allocate memory resources */ #define RES_NOTRAP 0x40 /* don't allow him to set traps */ #define RES_LPTRAP 0x80 /* traps set by him are low priority */ #define RES_LIMITED 0x100 /* limit per net number of clients */ #define RES_ALLFLAGS \ (RES_IGNORE|RES_DONTSERVE|RES_DONTTRUST|RES_NOQUERY\ |RES_NOMODIFY|RES_NOPEER|RES_NOTRAP|RES_LPTRAP|RES_LIMITED) /* * Match flags */ #define RESM_INTERFACE 0x1 /* this is an interface */ #define RESM_NTPONLY 0x2 /* match ntp port only */ /* * Restriction configuration ops */ #define RESTRICT_FLAGS 1 /* add flags to restrict entry */ #define RESTRICT_UNFLAG 2 /* remove flags from restrict entry */ #define RESTRICT_REMOVE 3 /* remove a restrict entry */ /* * Experimental alternate selection algorithm identifiers */ #define SELECT_1 1 #define SELECT_2 2 #define SELECT_3 3 #define SELECT_4 4 #define SELECT_5 5 /* * Endpoint structure for the select algorithm */ struct endpoint { double val; /* offset of endpoint */ int type; /* interval entry/exit */ }; /* * Defines for association matching */ #define AM_MODES 10 /* total number of modes */ #define NO_PEER 0 /* action when no peer is found */ /* * Association matching AM[] return codes */ #define AM_ERR -1 #define AM_NOMATCH 0 #define AM_PROCPKT 1 #define AM_FXMIT 2 #define AM_MANYCAST 3 #define AM_NEWPASS 4 #define AM_NEWBCL 5 #define AM_POSSBCL 6 /* NetInfo configuration locations */ #ifdef HAVE_NETINFO #define NETINFO_CONFIG_DIR "/config/ntp" #endif #endif /* NTP_H */