Makefile.in   [plain text]

# Makefile.in generated by automake 1.12.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2012 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# we traditionally installed software in bindir, while it should have gone
# in sbindir.  Now that we offer a choice, look in the "other" installation
# subdir to warn folks if there is another version there.




VPATH = @srcdir@
am__make_dryrun = \
  { \
    am__dry=no; \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
      *) \
        for am__flg in $$MAKEFLAGS; do \
          case $$am__flg in \
            *=*|--*) ;; \
            *n*) am__dry=yes; break;; \
          esac; \
        done;; \
    esac; \
    test $$am__dry = yes; \
  }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
EXTRA_PROGRAMS = sntp$(EXEEXT)
@BUILD_LIBEVENT_TRUE@am__append_1 = libevent
@BUILD_LIBEVENT_FALSE@am__append_2 = "--enable-local-libevent"
@NEED_LIBOPTS_TRUE@am__append_3 = libopts
@BUILD_SNTP_TRUE@am__append_4 = tests
DIST_COMMON = $(am__configure_deps) $(noinst_HEADERS) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/config.h.in $(top_srcdir)/bincheck.mf \
	$(top_srcdir)/check-libntp.mf $(top_srcdir)/check-libopts.mf \
	$(top_srcdir)/configure $(top_srcdir)/depsver.mf \
	$(top_srcdir)/includes.mf \
	$(top_srcdir)/libevent/build-aux/ar-lib \
	$(top_srcdir)/libevent/build-aux/compile \
	$(top_srcdir)/libevent/build-aux/config.guess \
	$(top_srcdir)/libevent/build-aux/config.sub \
	$(top_srcdir)/libevent/build-aux/depcomp \
	$(top_srcdir)/libevent/build-aux/install-sh \
	$(top_srcdir)/libevent/build-aux/ltmain.sh \
	$(top_srcdir)/libevent/build-aux/missing \
	libevent/build-aux/ar-lib libevent/build-aux/compile \
	libevent/build-aux/config.guess libevent/build-aux/config.sub \
	libevent/build-aux/depcomp libevent/build-aux/install-sh \
	libevent/build-aux/ltmain.sh libevent/build-aux/missing \
	libevent/build-aux/ylwrap
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/libopts/m4/libopts.m4 \
	$(top_srcdir)/libopts/m4/stdnoreturn.m4 \
	$(top_srcdir)/m4/hms_search_lib.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/ntp_cacheversion.m4 \
	$(top_srcdir)/m4/ntp_compiler.m4 \
	$(top_srcdir)/m4/ntp_crosscompile.m4 \
	$(top_srcdir)/m4/ntp_debug.m4 $(top_srcdir)/m4/ntp_dir_sep.m4 \
	$(top_srcdir)/m4/ntp_facilitynames.m4 \
	$(top_srcdir)/m4/ntp_googletest.m4 \
	$(top_srcdir)/m4/ntp_ipv6.m4 $(top_srcdir)/m4/ntp_lib_m.m4 \
	$(top_srcdir)/m4/ntp_libevent.m4 \
	$(top_srcdir)/m4/ntp_libntp.m4 \
	$(top_srcdir)/m4/ntp_lineeditlibs.m4 \
	$(top_srcdir)/m4/ntp_locinfo.m4 \
	$(top_srcdir)/m4/ntp_openssl.m4 \
	$(top_srcdir)/m4/ntp_pkg_config.m4 \
	$(top_srcdir)/m4/ntp_prog_cc.m4 $(top_srcdir)/m4/ntp_sntp.m4 \
	$(top_srcdir)/m4/ntp_sysexits.m4 \
	$(top_srcdir)/m4/ntp_unitytest.m4 \
	$(top_srcdir)/m4/ntp_ver_suffix.m4 \
	$(top_srcdir)/m4/openldap-thread-check.m4 \
	$(top_srcdir)/m4/openldap.m4 $(top_srcdir)/m4/os_cflags.m4 \
	$(top_srcdir)/m4/snprintf.m4 \
	$(top_srcdir)/m4/sntp_problemtests.m4 \
	$(top_srcdir)/m4/version.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
LIBRARIES = $(noinst_LIBRARIES)
ARFLAGS = cru
AM_V_AR = $(am__v_AR_@AM_V@)
am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
am__v_AR_0 = @echo "  AR      " $@;
am__v_AR_1 = 
libsntp_a_AR = $(AR) $(ARFLAGS)
libsntp_a_LIBADD =
am__objects_1 =
am_libsntp_a_OBJECTS = crypto.$(OBJEXT) kod_management.$(OBJEXT) \
	log.$(OBJEXT) main.$(OBJEXT) networking.$(OBJEXT) \
	sntp-opts.$(OBJEXT) utilities.$(OBJEXT) $(am__objects_1)
libsntp_a_OBJECTS = $(am_libsntp_a_OBJECTS)
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libexecdir)" \
	"$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" \
	"$(DESTDIR)$(man8dir)" "$(DESTDIR)$(htmldir)"
PROGRAMS = $(bin_PROGRAMS) $(libexec_PROGRAMS) $(sbin_PROGRAMS)
am_sntp_OBJECTS = sntp.$(OBJEXT) $(am__objects_1)
sntp_OBJECTS = $(am_sntp_OBJECTS)
sntp_LDADD = $(LDADD)
am__DEPENDENCIES_1 =
sntp_DEPENDENCIES = version.o libsntp.a $(am__DEPENDENCIES_1) \
	$(am__DEPENDENCIES_1) ../libntp/libntp.a $(am__DEPENDENCIES_1) \
	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
	$(am__DEPENDENCIES_1)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/libevent/build-aux/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
SOURCES = $(libsntp_a_SOURCES) $(sntp_SOURCES)
DIST_SOURCES = $(libsntp_a_SOURCES) $(sntp_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
man1dir = $(mandir)/man1
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man1_MANS) $(man8_MANS) $(man_MANS)
DATA = $(html_DATA) $(noinst_DATA)
HEADERS = $(noinst_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	cscope distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = include scripts unity libevent libopts tests
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_THREAD = @BUILD_THREAD@
CALC_TICKADJ_DB = @CALC_TICKADJ_DB@
CALC_TICKADJ_DL = @CALC_TICKADJ_DL@
CALC_TICKADJ_DS = @CALC_TICKADJ_DS@
CALC_TICKADJ_MS = @CALC_TICKADJ_MS@
CALC_TICKADJ_NI = @CALC_TICKADJ_NI@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CFLAGS_LIBEVENT = @CFLAGS_LIBEVENT@
CFLAGS_NTP = @CFLAGS_NTP@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPPFLAGS_LIBEVENT = @CPPFLAGS_LIBEVENT@
CPPFLAGS_NTP = @CPPFLAGS_NTP@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EDITLINE_LIBS = @EDITLINE_LIBS@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
GTEST_CONFIG = @GTEST_CONFIG@
GTEST_CPPFLAGS = @GTEST_CPPFLAGS@
GTEST_CXXFLAGS = @GTEST_CXXFLAGS@
GTEST_LDFLAGS = @GTEST_LDFLAGS@
GTEST_LIBS = @GTEST_LIBS@
HAVE_INLINE = @HAVE_INLINE@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDADD_LIBEVENT = @LDADD_LIBEVENT@
LDADD_LIBNTP = @LDADD_LIBNTP@
LDADD_LIBUTIL = @LDADD_LIBUTIL@
LDADD_NTP = @LDADD_NTP@
LDFLAGS = @LDFLAGS@
LDFLAGS_NTP = @LDFLAGS_NTP@
LIBISC_PTHREADS_NOTHREADS = @LIBISC_PTHREADS_NOTHREADS@
LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBOPTS_CFLAGS = @LIBOPTS_CFLAGS@
LIBOPTS_DIR = @LIBOPTS_DIR@
LIBOPTS_LDADD = @LIBOPTS_LDADD@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBTOOL_DEPS = @LIBTOOL_DEPS@
LIB_SYSLOG = @LIB_SYSLOG@
LIPO = @LIPO@
LN_S = @LN_S@
LTHREAD_LIBS = @LTHREAD_LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MANTAGFMT = @MANTAGFMT@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
NTPDATE_DB = @NTPDATE_DB@
NTPDATE_DL = @NTPDATE_DL@
NTPDATE_DS = @NTPDATE_DS@
NTPDATE_MS = @NTPDATE_MS@
NTPDATE_NI = @NTPDATE_NI@
NTPDC_DB = @NTPDC_DB@
NTPDC_DL = @NTPDC_DL@
NTPDC_DS = @NTPDC_DS@
NTPDC_MS = @NTPDC_MS@
NTPDC_NI = @NTPDC_NI@
NTPDSIM_DB = @NTPDSIM_DB@
NTPDSIM_DL = @NTPDSIM_DL@
NTPDSIM_DS = @NTPDSIM_DS@
NTPDSIM_MS = @NTPDSIM_MS@
NTPDSIM_NI = @NTPDSIM_NI@
NTPD_DB = @NTPD_DB@
NTPD_DL = @NTPD_DL@
NTPD_DS = @NTPD_DS@
NTPD_MS = @NTPD_MS@
NTPD_NI = @NTPD_NI@
NTPQ_DB = @NTPQ_DB@
NTPQ_DL = @NTPQ_DL@
NTPQ_DS = @NTPQ_DS@
NTPQ_MS = @NTPQ_MS@
NTPQ_NI = @NTPQ_NI@
NTPSNMPD_DB = @NTPSNMPD_DB@
NTPSNMPD_DL = @NTPSNMPD_DL@
NTPSNMPD_DS = @NTPSNMPD_DS@
NTPSNMPD_MS = @NTPSNMPD_MS@
NTPSNMPD_NI = @NTPSNMPD_NI@
NTPSWEEP_DB = @NTPSWEEP_DB@
NTPSWEEP_DL = @NTPSWEEP_DL@
NTPSWEEP_DS = @NTPSWEEP_DS@
NTPSWEEP_MS = @NTPSWEEP_MS@
NTPSWEEP_NI = @NTPSWEEP_NI@
NTPTIME_DB = @NTPTIME_DB@
NTPTIME_DL = @NTPTIME_DL@
NTPTIME_DS = @NTPTIME_DS@
NTPTIME_MS = @NTPTIME_MS@
NTPTIME_NI = @NTPTIME_NI@
NTPTRACE_DB = @NTPTRACE_DB@
NTPTRACE_DL = @NTPTRACE_DL@
NTPTRACE_DS = @NTPTRACE_DS@
NTPTRACE_MS = @NTPTRACE_MS@
NTPTRACE_NI = @NTPTRACE_NI@
NTP_FORCE_LIBEVENT_DIST = @NTP_FORCE_LIBEVENT_DIST@
NTP_KEYGEN_DB = @NTP_KEYGEN_DB@
NTP_KEYGEN_DL = @NTP_KEYGEN_DL@
NTP_KEYGEN_DS = @NTP_KEYGEN_DS@
NTP_KEYGEN_MS = @NTP_KEYGEN_MS@
NTP_KEYGEN_NI = @NTP_KEYGEN_NI@
NTP_WAIT_DB = @NTP_WAIT_DB@
NTP_WAIT_DL = @NTP_WAIT_DL@
NTP_WAIT_DS = @NTP_WAIT_DS@
NTP_WAIT_MS = @NTP_WAIT_MS@
NTP_WAIT_NI = @NTP_WAIT_NI@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_RUBY = @PATH_RUBY@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
POSIX_SHELL = @POSIX_SHELL@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SNTP = @SNTP@
SNTP_DB = @SNTP_DB@
SNTP_DL = @SNTP_DL@
SNTP_DS = @SNTP_DS@
SNTP_MS = @SNTP_MS@
SNTP_NI = @SNTP_NI@
STDNORETURN_H = @STDNORETURN_H@
STRIP = @STRIP@
TICKADJ_DB = @TICKADJ_DB@
TICKADJ_DL = @TICKADJ_DL@
TICKADJ_DS = @TICKADJ_DS@
TICKADJ_MS = @TICKADJ_MS@
TICKADJ_NI = @TICKADJ_NI@
TIMETRIM_DB = @TIMETRIM_DB@
TIMETRIM_DL = @TIMETRIM_DL@
TIMETRIM_DS = @TIMETRIM_DS@
TIMETRIM_MS = @TIMETRIM_MS@
TIMETRIM_NI = @TIMETRIM_NI@
UPDATE_LEAP_DB = @UPDATE_LEAP_DB@
UPDATE_LEAP_DL = @UPDATE_LEAP_DL@
UPDATE_LEAP_DS = @UPDATE_LEAP_DS@
UPDATE_LEAP_MS = @UPDATE_LEAP_MS@
UPDATE_LEAP_NI = @UPDATE_LEAP_NI@
VERSION = @VERSION@
VER_SUFFIX = @VER_SUFFIX@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I m4 -I libevent/m4 -I libopts/m4
NULL = 
AM_CFLAGS = $(CFLAGS_NTP)
AM_CPPFLAGS = $(SNTP_INCS) $(LIBOPTS_CFLAGS) $(CPPFLAGS_LIBEVENT) \
	$(CPPFLAGS_NTP)
AM_LDFLAGS = $(LDFLAGS_NTP)
LDADD = version.o libsntp.a $(LIBOPTS_LDADD) $(LDADD_LIBEVENT) \
	../libntp/libntp.a $(LDADD_LIBNTP) $(LIBM) $(PTHREAD_LIBS) \
	$(LDADD_NTP)
run_ag = cd $(srcdir) &&	env PATH="$(abs_builddir):$(PATH)" AUTOGEN_DNE_DATE=-D	\
		autogen -L include -L ag-tpl --writable

std_def_list = \
	$(srcdir)/include/debug-opt.def			\
	$(srcdir)/include/autogen-version.def 		\
	$(srcdir)/include/copyright.def 		\
	$(srcdir)/include/homerc.def 			\
	$(srcdir)/include/ntp.lic 			\
	$(srcdir)/include/version.def			\
	$(NULL)

bin_PROGRAMS = @SNTP_DB@
libexec_PROGRAMS = @SNTP_DL@
sbin_PROGRAMS = @SNTP_DS@
SUBDIRS = include scripts unity $(am__append_1) $(am__append_3) \
	$(am__append_4)
DIST_FAIL = $(am__append_2)
@BUILD_SNTP_TRUE@noinst_LIBRARIES = libsntp.a
libsntp_a_SOURCES = \
	crypto.c		\
	kod_management.c	\
	log.c			\
	main.c			\
	networking.c		\
	sntp-opts.c		\
	utilities.c		\
	$(NULL)

sntp_SOURCES = \
	sntp.c		\
	$(NULL)

noinst_HEADERS = \
	crypto.h		\
	data_formats.h		\
	kod_management.h	\
	log.h			\
	main.h			\
	networking.h		\
	sntp-opts.h		\
	utilities.h		\
	$(NULL)

DISTCLEANFILES = \
	.version			\
	version.c			\
	config.log			\
	$(man_MANS)			\
	$(NULL)

EXTRA_DIST = \
	$(srcdir)/COPYRIGHT		\
	ag-tpl				\
	deps-ver			\
	invoke-sntp.menu		\
	invoke-sntp.texi		\
	@NTP_FORCE_LIBEVENT_DIST@	\
	libpkgver 			\
	loc				\
	sntp-opts.def			\
	sntp.1sntpman			\
	sntp.1sntpmdoc			\
	sntp.man.in			\
	sntp.mdoc.in			\
	sntp.html			\
	sntp.texi			\
	unity/auto			\
	$(srcdir)/scm-rev		\
	$(srcdir)/m4/version.m4		\
	$(NULL)

BUILT_SOURCES = $(srcdir)/COPYRIGHT libtool $(srcdir)/sntp-opts.c \
	$(srcdir)/sntp-opts.h check-scm-rev \
	$(srcdir)/include/version.def $(srcdir)/m4/version.m4 \
	$(srcdir)/include/version.texi $(NULL) check-libntp \
	check-libopts .deps-ver
CLEANFILES = built-sources-only check-COPYRIGHT-submake $(NULL) \
	check-libntp check-libopts .deps-ver
man1_MANS = 
man8_MANS = 
man_MANS = sntp.$(SNTP_MS)
html_DATA = \
	$(srcdir)/sntp.html		\
	$(NULL)

noinst_DATA = \
	$(srcdir)/invoke-sntp.menu	\
	$(srcdir)/invoke-sntp.texi	\
	$(srcdir)/sntp.man.in		\
	$(srcdir)/sntp.mdoc.in		\
	$(NULL)

SNTP_INCS = -I$(top_srcdir)/../include \
	-I$(top_srcdir)/../lib/isc/include \
	-I$(top_srcdir)/../lib/isc/$(LIBISC_PTHREADS_NOTHREADS)/include \
	-I$(top_srcdir)/../lib/isc/unix/include
all: $(BUILT_SOURCES) config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/bincheck.mf $(top_srcdir)/check-libntp.mf $(top_srcdir)/check-libopts.mf $(top_srcdir)/depsver.mf $(top_srcdir)/includes.mf $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/bincheck.mf $(top_srcdir)/check-libntp.mf $(top_srcdir)/check-libopts.mf $(top_srcdir)/depsver.mf $(top_srcdir)/includes.mf:

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@if test ! -f $@; then rm -f stamp-h1; else :; fi
	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in:  $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1

clean-noinstLIBRARIES:
	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
libsntp.a: $(libsntp_a_OBJECTS) $(libsntp_a_DEPENDENCIES) $(EXTRA_libsntp_a_DEPENDENCIES) 
	$(AM_V_at)-rm -f libsntp.a
	$(AM_V_AR)$(libsntp_a_AR) libsntp.a $(libsntp_a_OBJECTS) $(libsntp_a_LIBADD)
	$(AM_V_at)$(RANLIB) libsntp.a
install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
	fi; \
	for p in $$list; do echo "$$p $$p"; done | \
	sed 's/$(EXEEXT)$$//' | \
	while read p p1; do if test -f $$p || test -f $$p1; \
	  then echo "$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
	sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
	    else { print "f", $$3 "/" $$4, $$1; } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	    test -z "$$files" || { \
	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	    } \
	; done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' `; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files

clean-binPROGRAMS:
	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list
install-libexecPROGRAMS: $(libexec_PROGRAMS)
	@$(NORMAL_INSTALL)
	@list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(libexecdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(libexecdir)" || exit 1; \
	fi; \
	for p in $$list; do echo "$$p $$p"; done | \
	sed 's/$(EXEEXT)$$//' | \
	while read p p1; do if test -f $$p || test -f $$p1; \
	  then echo "$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
	sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
	    else { print "f", $$3 "/" $$4, $$1; } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	    test -z "$$files" || { \
	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \
	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \
	    } \
	; done

uninstall-libexecPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' `; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(libexecdir)" && rm -f $$files

clean-libexecPROGRAMS:
	@list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list
install-sbinPROGRAMS: $(sbin_PROGRAMS)
	@$(NORMAL_INSTALL)
	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
	fi; \
	for p in $$list; do echo "$$p $$p"; done | \
	sed 's/$(EXEEXT)$$//' | \
	while read p p1; do if test -f $$p || test -f $$p1; \
	  then echo "$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
	sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
	    else { print "f", $$3 "/" $$4, $$1; } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	    test -z "$$files" || { \
	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
	    } \
	; done

uninstall-sbinPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' `; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(sbindir)" && rm -f $$files

clean-sbinPROGRAMS:
	@list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list
sntp$(EXEEXT): $(sntp_OBJECTS) $(sntp_DEPENDENCIES) $(EXTRA_sntp_DEPENDENCIES) 
	@rm -f sntp$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(sntp_OBJECTS) $(sntp_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/kod_management.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/log.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/networking.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sntp-opts.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sntp.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utilities.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1='$(man1_MANS)'; \
	list2='$(man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-man8: $(man8_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1='$(man8_MANS)'; \
	list2='$(man_MANS)'; \
	test -n "$(man8dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.8[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
	done; }

uninstall-man8:
	@$(NORMAL_UNINSTALL)
	@list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.8[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
install-htmlDATA: $(html_DATA)
	@$(NORMAL_INSTALL)
	@list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done

uninstall-htmlDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(htmldir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done
cscopelist-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)

clean-cscope:
	-rm -f cscope.files

cscope.files: clean-cscope cscopelist-recursive cscopelist

cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS) $(LISP)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically 'make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(LIBRARIES) $(PROGRAMS) $(MANS) $(DATA) $(HEADERS) \
		config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(htmldir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive

clean-am: clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \
	clean-libtool clean-noinstLIBRARIES clean-sbinPROGRAMS \
	mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-hdr distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-data-local install-htmlDATA install-man

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-binPROGRAMS install-libexecPROGRAMS \
	install-sbinPROGRAMS
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man: install-man1 install-man8

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binPROGRAMS uninstall-htmlDATA \
	uninstall-libexecPROGRAMS uninstall-man uninstall-sbinPROGRAMS

uninstall-man: uninstall-man1 uninstall-man8

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
	cscopelist-recursive ctags-recursive install install-am \
	install-exec-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am am--refresh check check-am clean clean-binPROGRAMS \
	clean-cscope clean-generic clean-libexecPROGRAMS clean-libtool \
	clean-noinstLIBRARIES clean-sbinPROGRAMS cscope cscopelist \
	cscopelist-recursive ctags ctags-recursive dist dist-all \
	dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ dist-xz \
	dist-zip distcheck distclean distclean-compile \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-binPROGRAMS install-data install-data-am \
	install-data-local install-dvi install-dvi-am install-exec \
	install-exec-am install-exec-hook install-html install-html-am \
	install-htmlDATA install-info install-info-am \
	install-libexecPROGRAMS install-man install-man1 install-man8 \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-sbinPROGRAMS install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am \
	uninstall-binPROGRAMS uninstall-htmlDATA \
	uninstall-libexecPROGRAMS uninstall-man uninstall-man1 \
	uninstall-man8 uninstall-sbinPROGRAMS


install-data-local: install-html

FRC:
	@: do-nothing action to prevent default SCCS get
	@: FRC "force" depends on nothing and is not a file, so is
	@: always out-of-date causing targets which depend on it to
	@: similarly always be outdated causing their rules to fire
	@: each time they or a dependent is built.

$(PROGRAMS): version.o

version.c: $(sntp_OBJECTS) ../libntp/libntp.a Makefile $(srcdir)/scm-rev
	env CSET=`cat $(srcdir)/scm-rev` $(top_builddir)/../scripts/build/mkver sntp

version.o: version.c
	env CCACHE_DISABLE=1 $(COMPILE) -c version.c -o version.o

check-autogen-version.def: FRC
	@cd $(srcdir)							\
	&& test -r ../include/autogen-version.def			\
	&& ( if cmp -s ../include/autogen-version.def autogen-version.def; \
	   then : ;							\
	   else cp ../include/autogen-version.def autogen-version.def;	 \
		echo "Installing new sntp/autogen-version.def file";	\
	   fi )

$(srcdir)/autogen-version.def:
	$(MAKE) $(AM_MAKEFLAGS) check-autogen-version.def

built-sources-only: $(BUILT_SOURCES)
	@: do-nothing action to avoid default SCCS get

check-scm-rev: $(srcdir)/scm-rev
	@: do-nothing

$(srcdir)/scm-rev:
	-test -r $(srcdir)/../SCCS/s.ChangeSet &&		\
	    (bk version) >/dev/null 2>&1 &&			\
	    cd $(srcdir)/.. &&					\
	    x=`bk -R prs -hr+ -nd:I: ChangeSet` &&		\
	    y=`cat sntp/scm-rev 2>/dev/null` || true &&		\
	    case "$$x" in ''|$$y) ;; *) echo $$x > sntp/scm-rev ;; esac

$(srcdir)/m4/version.m4: $(srcdir)/../packageinfo.sh
	TEMPDIR=`pwd` && export TEMPDIR && cd $(srcdir) && \
	../scripts/build/genver m4/version.m4

$(srcdir)/include/version.def: $(srcdir)/../packageinfo.sh
	TEMPDIR=`pwd` && export TEMPDIR && cd $(srcdir) && \
	../scripts/build/genver include/version.def

$(srcdir)/include/version.texi: $(srcdir)/../packageinfo.sh
	TEMPDIR=`pwd` && export TEMPDIR && cd $(srcdir) && \
	../scripts/build/genver include/version.texi

$(srcdir)/../COPYRIGHT:
	cd .. && $(MAKE) $(AM_MAKEFLAGS) COPYRIGHT-please

check-COPYRIGHT-submake: $(srcdir)/../COPYRIGHT
	@cmp -s $(srcdir)/../COPYRIGHT $(srcdir)/COPYRIGHT	\
	 || { cp $(srcdir)/../COPYRIGHT $(srcdir)		\
	      && echo 'updated sntp/COPYRIGHT installed' ;}
	@echo 'submake avoided if this file is newer than parent COPYRIGHT' > $@

check-COPYRIGHT: FRC
	[ ! -r $(srcdir)/../COPYRIGHT ]					\
	|| [ check-COPYRIGHT-submake -nt $(srcdir)/../COPYRIGHT ]	\
	|| $(MAKE) $(AM_MAKEFLAGS) check-COPYRIGHT-submake

$(srcdir)/COPYRIGHT: check-COPYRIGHT
	@: do-nothing action to prevent any default

$(srcdir)/sntp-opts.h: $(srcdir)/sntp-opts.c
	@: do-nothing action to avoid default SCCS get, .h built with .c

$(srcdir)/sntp-opts.c: $(srcdir)/sntp-opts.def $(std_def_list)
	$(run_ag) sntp-opts.def

###

$(srcdir)/sntp.1sntpman: $(srcdir)/sntp-opts.def $(std_def_list)
	$(run_ag) -DMAN_SECTION=1sntpman -Tagman-cmd.tpl sntp-opts.def

$(srcdir)/sntp.man.in: $(srcdir)/sntp.1sntpman $(srcdir)/scripts/mansec2subst.sed
	sed -f $(srcdir)/scripts/mansec2subst.sed $(srcdir)/sntp.1sntpman > $(srcdir)/sntp.man.in+
	mv $(srcdir)/sntp.man.in+ $(srcdir)/sntp.man.in

###

$(srcdir)/sntp.1sntpmdoc: $(srcdir)/sntp-opts.def $(std_def_list)
	$(run_ag) -DMAN_SECTION=1sntpmdoc -Tagmdoc-cmd.tpl sntp-opts.def

$(srcdir)/sntp.mdoc.in: $(srcdir)/sntp.1sntpmdoc $(srcdir)/scripts/mansec2subst.sed
	sed -f $(srcdir)/scripts/mansec2subst.sed $(srcdir)/sntp.1sntpmdoc > $(srcdir)/sntp.mdoc.in+
	mv $(srcdir)/sntp.mdoc.in+ $(srcdir)/sntp.mdoc.in

###

sntp.$(SNTP_MS): $(srcdir)/sntp.$(MANTAGFMT).in $(top_builddir)/config.status
	$(top_builddir)/config.status --file=sntp.$(SNTP_MS)+:$(srcdir)/sntp.$(MANTAGFMT).in
	mv sntp.$(SNTP_MS)+ sntp.$(SNTP_MS)

###

$(srcdir)/invoke-sntp.menu: $(srcdir)/invoke-sntp.texi
	@: do-nothing action to avoid default SCCS get, .menu built with .texi

$(srcdir)/invoke-sntp.texi: $(srcdir)/sntp-opts.def $(std_def_list)
	$(run_ag) -Tagtexi-cmd.tpl -DLEVEL=section sntp-opts.def
	$(top_srcdir)/../scripts/build/check--help $@

$(srcdir)/sntp.html: $(srcdir)/invoke-sntp.menu $(srcdir)/invoke-sntp.texi $(srcdir)/sntp.texi $(srcdir)/include/version.texi
	cd $(srcdir) && ( makeinfo --force --html --no-split -o sntp.html sntp.texi || true )

libtool: $(LIBTOOL_DEPS)
	./config.status --recheck

# HMS: libevent/ is a target if it's in EXTRA_DIST via NTP_FORCE_LIBEVENT_DIST.
# Note that libevent/ is already in DIST_SUBDIRS (implicit in Makefile.am
# but explicit in Makefile.in).  This check doesn't help with distclean.
libevent: distdir-pre-check

# HMS: Stops the build for gmake or pmake
distdir-pre-check:
	case "$(DIST_FAIL)" in	\
	 '')  ;;		\
	 *) $(error re-run configure adding $(DIST_FAIL) if you want to make a distribution.);	\
	    echo "re-run configure adding $(DIST_FAIL) if you want to make a distribution.";	\
	    exit 1 ;;		\
	esac

install-exec-hook:
	@test -z "${bin_PROGRAMS}${bin_SCRIPTS}"		\
	|| for i in ${bin_PROGRAMS} ${bin_SCRIPTS} " "; do	\
	   test ! -f ${sbindir}/$$i				\
		|| echo "*** $$i is also in ${sbindir}!";	\
	done
	@test -z "${sbin_PROGRAMS}${asbin_SCRIPTS}"		\
	|| for i in ${sbin_PROGRAMS} ${sbin_SCRIPTS} " "; do	\
	   test ! -f ${bindir}/$$i				\
		|| echo "*** $$i is also in ${bindir}!";	\
	done

#

check-libntp: ../libntp/libntp.a
	@echo stamp > $@

../libntp/libntp.a:
	cd ../libntp && $(MAKE) $(AM_MAKEFLAGS) libntp.a

check-libopts: libopts/libopts.la
	@echo stamp > $@

libopts/libopts.la:
	-cd libopts && $(MAKE) $(AM_MAKEFLAGS) libopts.la
$(DEPDIR)/deps-ver: $(top_srcdir)/deps-ver
	@[ -f $@ ] ||							\
		cp $(top_srcdir)/deps-ver $@
	@[ -w $@ ] ||							\
		chmod ug+w $@
	@cmp $(top_srcdir)/deps-ver $@ > /dev/null || (			\
		$(MAKE) $(AM_MAKEFLAGS) clean &&					\
		echo -n "Prior $(subdir)/$(DEPDIR) version " &&		\
		cat $@ &&						\
		rm -rf $(DEPDIR) &&					\
		mkdir $(DEPDIR) && 					\
		case "$(top_builddir)" in				\
		 .)							\
		    ./config.status Makefile depfiles			\
		    ;;							\
		 *)							\
		    cd "$(top_builddir)" &&				\
		    ./config.status $(subdir)/Makefile depfiles &&	\
		    cd $(subdir)					\
		    ;;							\
		esac &&							\
		echo -n "Cleaned $(subdir)/$(DEPDIR) version " &&	\
		cat $(top_srcdir)/deps-ver				\
	)
	cp $(top_srcdir)/deps-ver $@

.deps-ver: $(top_srcdir)/deps-ver
	@[ ! -d $(DEPDIR) ] || $(MAKE) $(AM_MAKEFLAGS) $(DEPDIR)/deps-ver
	@touch $@

#
# depsver.mf	included in Makefile.am for directories with .deps
#
# When building in the same directory with sources that change over
# time, such as when tracking using bk, the .deps files can become
# stale with respect to moved, deleted, or superceded headers.  Most
# commonly, this would exhibit as make reporting a failure to make a
# header file which is no longer in the location given.  To address
# this issue, we use a deps-ver file which is updated with each change
# that breaks old .deps files.  A copy of deps-ver is made into
# $(DEPDIR) if not already present.  If $(DEPDIR)/deps-ver is present
# with different contents than deps-ver, we make clean to ensure all
# .o files built before the incompatible change are rebuilt along with
# their updated .deps files, then remove $(DEPDIR) and recreate it as
# empty stubs.
#
# It is normal when configured with --disable-dependency-tracking for
# the DEPDIR to not have been created.  For this reason, we use the
# intermediate target .deps-ver, which invokes make recursively if
# DEPDIR exists.
#
# If you modify depsver.mf, please make the changes to the master
# copy, the one in sntp is copied by the bootstrap script from it.
#
# This comment block follows rather than leads the related code so that
# it stays with it in the generated Makefile.in and Makefile.
#

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: