######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
#
# This version of terminfo.src is distributed with ncurses and is maintained
# by Thomas E. Dickey (TD).
#
# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
# $Revision: 1.341 $
# $Date: 2008/10/12 23:03:54 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
# stopped updates several years ago); we have decided to not change the header
# unless there is also a change in content.
#
# To further muddy the waters, it is noted that changes to this file as part of
# maintenance of ncurses (since 1996) are generally conceded to be copyright
# under the ncurses MIT-style license. That was the effect of the agreement
# which the principal authors of ncurses made in 1998. However, since much of
# the file itself is of unknown authorship (and the disclaimer below makes it
# obvious that Raymond cannot or will not convey rights over those parts),
# there is no explicit copyright notice on the file itself.
#
# It would also be a nuisance to split the file into unknown/known authorship
# and move pieces as they are maintained, since many of the maintenance changes
# have been small corrections to Raymond's translations to/from termcap format,
# correcting the data but not the accompanying annotations.
#
# In any case, note that almost half of this file is not data but annotations
# which reflect creative effort. Furthermore, the structure of entries to
# reuse common chunks also is creative (and subject to copyright). Finally,
# some portions of the data are derivative work under a compatible MIT-style
# license from xterm.
#
#------------------------------------------------------------------------------
# Version 10.2.1
# terminfo syntax
#
# Eric S. Raymond (current maintainer)
# John Kunze, Berkeley
# Craig Leres, Berkeley
#
# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
# address is no longer valid. The latest version can always be found at
# <http://www.tuxedo.org/terminfo>.
#
# PURPOSE OF THIS FILE:
#
# This file describes the capabilities of various character-cell terminals,
# as needed by software such as screen-oriented editors.
#
# Other terminfo and termcap files exist, supported by various OS vendors
# or as relics of various older versions of UNIX. This one is the longest
# and most comprehensive one in existence. It subsumes not only the entirety
# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
# termcap file, but also large numbers of vendor-maintained termcap and
# terminfo entries more complete and carefully tested than those in historical
# termcap/terminfo versions.
#
# Pointers to related resources (including the ncurses distribution) may
# be found at <http://www.tuxedo.org/terminfo>.
#
# INTERNATIONALIZATION:
#
# This file uses only the US-ASCII character set (no ISO8859 characters).
#
# This file assumes a US-ASCII character set. If you need to fix this, start
# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
# for your character set. \E(A and \E)A enables the British character set
# with the pound sign at position 2/3.
#
# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
# C1 characters are considered the first-byte set of the Japanese encodings,
# so \E)0 should be avoided in <enacs> and initialization strings.
#
# FILE FORMAT:
#
# The version you are looking at may be in any of three formats: master
# (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
# which by the format given in the header above.
#
# The master format is accepted and generated by the terminfo tools in the
# ncurses suite; it differs from stock (System V-compatible) terminfo only
# in that it admits a group of capabilities (prefixed `OT') equivalent to
# various obsolete termcap capabilities. You can, thus, convert from master
# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
# you have ncurses `tic -I' is nicer (among other things, it automatically
# outputs entries in a canonical form).
#
# The termcap version is generated automatically from the master version
# using tic -C. This filtering leaves in the OT capabilities under their
# original termcap names. All translated entries fit within the 1023-byte
# string-table limit of archaic termcap libraries except where explicitly
# noted below. Note that the termcap translation assumes that your termcap
# library can handle multiple tc capabilities in an entry. 4.4BSD has this
# capability. Older versions of GNU termcap, through 1.3, do not.
#
# For details on these formats, see terminfo(5) in the ncurses distribution,
# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
# curses has been declared obsolete by the caretakers of the 4.4BSD sources
# as of June 1995; they are encouraging everyone to migrate to ncurses.
#
# Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
# no entry in this file has embedded comments. This is so source translation
# to termcap only has to carry over leading comments. Also, no name field
# contains embedded whitespace (such whitespace confuses rdist).
#
# Further note: older versions of this file were often installed with an editor
# script (reorder) that moved the most common terminal types to the front of
# the file. This should no longer be necessary, as the file is now ordered
# roughly by type frequency with ANSI/VT100 and other common types up front.
#
# Some information has been merged in from terminfo files distributed by
# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
# comes from vendors who maintain official terminfos for their hardware
# (notably DEC and Wyse).
#
# A detailed change history is included at the end of this file.
#
# FILE ORGANIZATION:
#
# Comments in this file begin with # - they cannot appear in the middle
# of a terminfo/termcap entry (this feature had to be sacrificed in order
# to allow standard terminfo and termcap syntax to be generated cleanly from
# the master format). Individual capabilities are commented out by
# placing a period between the colon and the capability name.
#
# The file is divided up into major sections (headed by lines beginning with
# the string "########") and minor sections (beginning with "####"); do
#
# grep "^####" <file> | more
#
# to see a listing of section headings. The intent of the divisions is
# (a) to make it easier to find things, and (b) to order the database so
# that important and frequently-encountered terminal types are near the
# front (so that you'll get reasonable search efficiency from a linear
# search of the termcap form even if you don't use reorder). Minor sections
# usually correspond to manufacturers or standard terminal classes.
# Parenthesized words following manufacturer names are type prefixes or
# product line names used by that manufacturers.
#
# HOW TO READ THE ENTRIES:
#
# The first name in an entry is the canonical name for the model or
# type, last entry is a verbose description. Others are mnemonic synonyms for
# the terminal.
#
# Terminal names look like <manufacturer> <model> - <modes/options>
# The part to the left of the dash, if a dash is present, describes the
# particular hardware of the terminal. The part to the right may be used
# for flags indicating special ROMs, extra memory, particular terminal modes,
# or user preferences.
#
# All names should be in lower case, for consistency in typing.
#
# The following are conventionally used suffixes:
# -2p Has two pages of memory. Likewise 4p, 8p, etc.
# -am Enable auto-margin.
# -m Monochrome. Suppress color support
# -mc Magic-cookie. Some terminals (notably older Wyses) can
# only support one attribute without magic-cookie lossage.
# Their base entry is usually paired with another that
# uses magic cookies to support multiple attributes.
# -nam No auto-margin - suppress <am> capability
# -nl No labels - suppress soft labels
# -ns No status line - suppress status line
# -rv Terminal in reverse video mode (black on white)
# -s Enable status line.
# -vb Use visible bell (<flash>) rather than <bel>.
# -w Wide - in 132 column mode.
# If a name has multiple suffixes and one is a line height, that one should
# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
#
# Entries with embedded plus signs are designed to be included through use/tc
# capabilities, not used as standalone entries.
#
# To avoid search clashes, some older all-numeric names for terminals have
# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
# All primary names of terminals now have alphanumeric prefixes.
#
# Comments marked "esr" are mostly results of applying the termcap-compiler
# code packaged with ncurses and contemplating the resulting error messages.
# In many cases, these indicated obvious fixes to syntax garbled by the
# composers. In a few cases, I was able to deduce corrected forms for garbled
# capabilities by looking at context. All the information in the original
# entries is preserved in the comments.
#
# In the comments, terminfo capability names are bracketed with <> (angle
# brackets). Termcap capability names are bracketed with :: (colons).
#
# INTERPRETATION OF USER CAPABILITIES
#
# The System V Release 4 and XPG4 terminfo format defines ten string
# capabilities for use by applications, <u0>...<u9>. In this file, we use
# certain of these capabilities to describe functions which are not covered
# by terminfo. The mapping is as follows:
#
# u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
# u8 terminal answerback description
# u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
# u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
#
# The terminal enquire string <u9> should elicit an answerback response
# from the terminal. Common values for <u9> will be ^E (on older ASCII
# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
#
# The cursor position request (<u7>) string should elicit a cursor position
# report. A typical value (for VT100 terminals) is \E[6n.
#
# The terminal answerback description (u8) must consist of an expected
# answerback string. The string may contain the following scanf(3)-like
# escapes:
#
# %c Accept any character
# %[...] Accept any number of characters in the given set
#
# The cursor position report (<u6>) string must contain two scanf(3)-style
# %d format elements. The first of these must correspond to the Y coordinate
# and the second to the %d. If the string contains the sequence %i, it is
# taken as an instruction to decrement each value after reading it (this is
# the inverse sense from the cup string). The typical CPR value is
# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
#
# These capabilities are used by tack(1m), the terminfo action checker
# (distributed with ncurses 5.0).
#
# TABSET FILES
#
# All the entries in this file have been edited to assume that the tabset
# files directory is /usr/share/tabset, in conformance with the File Hierarchy
# Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
#
# No curses package we know of actually uses these files. If their location
# is an issue, you will have to hand-patch the file locations before compiling
# this file.
#
# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
#
# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
# character-cell terminals are increasingly replaced by X displays, much of
# this file is becoming a historical document (this is part of the reason for
# the new organization, which puts ANSI types, xterm, Unix consoles,
# and vt100 up front in confidence that this will catch 95% of new hardware).
#
# For the terminal types still alive, I'd like to have manufacturer's
# contact data (Internet address and/or snail-mail + phone).
#
# I'm also interested in enriching the comments so that the latter portions of
# the file do in fact become a potted history of VDT technology as seen by
# UNIX hackers. Ideally, I'd like the headers for each manufacturer to
# include its live/dead/out-of-the-business status, and for as many
# terminal types as possible to be tagged with information like years
# of heaviest use, popularity, and interesting features.
#
# I'm especially interested in identifying the obscure entries listed under
# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
# wisdom about them gets lost. If you know a lot about obscure old terminals,
# please go to the terminfo resource page, grab the UFO file (ufo.ti), and
# eyeball it for things you can identify and describe.
#
# If you have been around long enough to contribute, please read the file
# with this in mind and send me your annotations.
#
# COPYRIGHTS AND OTHER DELUSIONS
#
# The BSD ancestor of this file had a standard Regents of the University of
# California copyright with dates from 1980 to 1993.
#
# Some information has been merged in from a terminfo file SCO distributes.
# It has an obnoxious boilerplate copyright which I'm ignoring because they
# took so much of the content from the ancestral BSD versions of this file
# and didn't attribute it, thereby violating the BSD Regents' copyright.
#
# Not that anyone should care. However many valid functions copyrights may
# serve, putting one on a termcap/terminfo file with hundreds of anonymous
# contributors makes about as much sense as copyrighting a wall-full of
# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
#
# This file deliberately has no copyright. It belongs to no one and everyone.
# If you claim you own it, you will merely succeed in looking like a fool.
# Use it as you like. Use it at your own risk. Copy and redistribute freely.
# There are no guarantees anywhere. Svaha!
#
######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
#
# This section describes terminal classes and brands that are still
# quite common.
#
#### Specials
#
# Special "terminals". These are used to label tty lines when you don't
# know what kind of terminal is on it. The characteristics of an unknown
# terminal are the lowest common denominator - they look about like a ti 700.
#
dumb|80-column dumb tty,
am,
cols#80,
bel=^G, cr=^M, cud1=^J, ind=^J,
unknown|unknown terminal type,
gn, use=dumb,
lpr|printer|line printer,
OTbs, hc, os,
cols#132, lines#66,
bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
glasstty|classic glass tty interpreting ASCII control characters,
OTbs, am,
cols#80,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
kcud1=^J, nel=^M^J, .kbs=^H,
vanilla|dumb tty,
OTbs,
bel=^G, cr=^M, cud1=^J, ind=^J,
# This is almost the same as "dumb", but with no prespecified width.
# DEL and ^C are hardcoded to act as kill characters.
# ^D acts as a line break (just like newline).
# It also interprets
# \033];xxx\007
# for compatibility with xterm -TD
9term|Plan9 terminal emulator for X,
am,
OTnl=^J, bel=^G, cud1=^J,
#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
#
# See the end-of-file comment for more on these.
#
# ANSI capabilities are broken up into pieces, so that a terminal
# implementing some ANSI subset can use many of them.
ansi+local1,
cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
ansi+local,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, use=ansi+local1,
ansi+tabs,
cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g,
ansi+inittabs,
it#8, use=ansi+tabs,
ansi+erase,
clear=\E[H\E[J, ed=\E[J, el=\E[K,
ansi+rca,
hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
ansi+cup,
cup=\E[%i%p1%d;%p2%dH, home=\E[H,
ansi+rep,
rep=%p1%c\E[%p2%{1}%-%db,
ansi+idl1,
dl1=\E[M, il1=\E[L,
ansi+idl,
dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
ansi+idc,
dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
ansi+arrows,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
khome=\E[H,
ansi+sgr|ansi graphic renditions,
blink=\E[5m, invis=\E[8m, rev=\E[7m,
sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E[0m,
ansi+sgrso|ansi standout only,
rmso=\E[m, smso=\E[7m,
ansi+sgrul|ansi underline only,
rmul=\E[m, smul=\E[4m,
ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
bold=\E[1m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
dim=\E[2m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
ansi+pp|ansi printer port,
mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
ansi+csr|ansi scroll-region plus cursor save & restore,
csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
# The IBM PC alternate character set. Plug this into any Intel console entry.
# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
# ROM graphics for control characters such as the diamond, up- and down-arrow.
# This works with the System V, Linux, and BSDI consoles. It's a safe bet this
# will work with any Intel console, they all seem to have inherited \E[11m
# from the ANSI.SYS de-facto standard.
klone+acs|alternate character set for ansi.sys displays,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
rmacs=\E[10m, smacs=\E[11m,
# Highlight controls corresponding to the ANSI.SYS standard. Most
# console drivers for Intel boxes obey these. Makes the same assumption
# about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
klone+sgr|attribute control for ansi.sys displays,
blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
rmso=\E[m, rmul=\E[m,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
use=klone+acs,
# Most Intel boxes do not treat "invis" (invisible) text.
klone+sgr8|attribute control for ansi.sys displays,
invis=\E[8m,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
use=klone+sgr,
# Highlight controls corresponding to the ANSI.SYS standard. *All*
# console drivers for Intel boxes obey these. Does not assume \E[11m will
# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
# diamond and arrow characters under curses.
klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
rmul=\E[m,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
use=klone+acs,
# KOI8-R (RFC1489) acs (alternate character set)
# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
rmacs=\E[10m, smacs=\E[11m,
# ANSI.SYS color control. The setab/setaf caps depend on the coincidence
# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
# but equivalent strings that don't rely on that coincidence:
# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
# They match a subset of ECMA-48.
klone+color|color control for ansi.sys and ISO6429-compatible displays,
colors#8, ncv#3, pairs#64,
op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
# This is better than klone+color, it doesn't assume white-on-black as the
# default color pair, but many `ANSI' terminals don't grok the <op> cap.
ecma+color|color control for ECMA-48-compatible terminals,
AX,
colors#8, ncv#3, pairs#64,
op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
# Attribute control for ECMA-48-compatible terminals
ecma+sgr|attribute capabilities for true ECMA-48 terminals,
rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
# For comparison, here are all the capabilities implied by the Intel
# Binary Compatibility Standard (level 2) that fit within terminfo.
# For more detail on this rather pathetic standard, see the comments
# near the end of this file.
ibcs2|Intel Binary Compatibility Standard prescriptions,
cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB,
cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
#### ANSI/ECMA-48 terminals and terminal emulators
#
# See near the end of this file for details on ANSI conformance.
# Don't mess with these entries! Lots of other entries depend on them!
#
# This section lists entries in a least-capable to most-capable order.
# if you're in doubt about what `ANSI' matches yours, try them in that
# order and back off from the first that breaks.
# ansi-mr is for ANSI terminals with ONLY relative cursor addressing
# and more than one page of memory. It uses local motions instead of
# direct cursor addressing, and makes almost no assumptions. It does
# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
ansi-mr|mem rel cup ansi,
am, xon,
cols#80, lines#24, use=vanilla, use=ansi+erase,
use=ansi+local1,
# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
# beware of screen size problems and memory relative cursor addressing.
ansi-mini|any ansi terminal with pessimistic assumptions,
am, xon,
cols#80, lines#24, use=vanilla, use=ansi+cup,
use=ansi+erase,
# ansi-mtabs adds relative addressing and minimal tab support
ansi-mtabs|any ansi terminal with pessimistic assumptions,
it#8,
ht=^I, use=ansi+local1, use=ansi-mini,
# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
#
# The following is an entry for the full ANSI 3.64 (1977). It lacks
# padding, but most terminals using the standard are "fast" enough
# not to require any -- even at 9600 bps. If you encounter problems,
# try including the padding specifications.
#
# Note: the :as: and :ae: specifications are not implemented here, for
# the available termcap documentation does not make clear WHICH alternate
# character set to specify. ANSI 3.64 seems to make allowances for several.
# Please make the appropriate adjustments to fit your needs -- that is
# if you will be using alternate character sets.
#
# There are very few terminals running the full ANSI 3.64 standard,
# so I could only test this entry on one verified terminal (Visual 102).
# I would appreciate the results on other terminals sent to me.
#
# Please report comments, changes, and problems to:
#
# U.S. MAIL: Hugh Hansard
# Box: 22830
# Emory University
# Atlanta, GA. 30322.
#
# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
#
# (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
ansi77|ansi 3.64 standard 1977 version,
OTbs, am, mir,
cols#80, it#8, lines#24,
bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
# Procomm and some other ANSI emulations don't recognize all of the ANSI-
# standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
# <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
# 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
# to confuse many emulators. On the other hand, we can count on these programs
# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
# ANSI.SYS influence.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
OTbs, am, mir, msgr,
cols#80, it#8, lines#24,
bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g,
use=klone+sgr-dumb,
pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
lines#25, use=pcansi-m,
pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
lines#33, use=pcansi-m,
pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
lines#43, use=pcansi-m,
# The color versions. All PC emulators do color...
pcansi|ibm-pc terminal programs claiming to be ansi,
use=klone+color, use=pcansi-m,
pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
lines#25, use=pcansi,
pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
lines#33, use=pcansi,
pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
lines#43, use=pcansi,
# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
# If you want pound signs rather than dollars, replace `B' with `A'
# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
mc5i,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g,
vpa=\E[%i%p1%dd, use=pcansi-m,
ansi+enq|ncurses extension for ANSI ENQ,
u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
u9=\E[c,
# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
# standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
ansi|ansi/pc-term compatible with color,
use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
# ansi-generic is a vanilla ANSI terminal. This is assumed to implement
# all the normal ANSI stuff with no extensions. It assumes
# insert/delete line/char is there, so it won't work with
# vt100 clones. It assumes video attributes for bold, blink,
# underline, and reverse, which won't matter much if the terminal
# can't do some of those. Padding is assumed to be zero, which
# shouldn't hurt since xon/xoff is assumed.
ansi-generic|generic ansi standard terminal,
am, xon,
cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
use=ansi+rca, use=ansi+erase, use=ansi+tabs,
use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
use=ansi+sgrbold, use=ansi+arrows,
#### DOS ANSI.SYS variants
#
# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
# documentation (except for the keyboard key reassignment feature, which
# doesn't fit the <pfkey> model well). The klone+acs sequences were valid
# though undocumented. The <pfkey> capability is untested but should work for
# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
OTbs, am, mir, msgr, xon,
cols#80, lines#25,
clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u,
rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
u7=\E[6n, use=klone+color, use=klone+sgr8,
ansi.sys|ANSI.SYS 3.1 and later versions,
el=\E[K, use=ansi.sys-old,
#
# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
# This should only be used when the terminal emulator cannot redefine the keys.
# Since redefining keys with ansi.sys also affects PC-DOS programs, the key
# definitions must be restored. If the terminal emulator is quit while in vi
# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
# (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
# does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
# Note that <kcub1> is always BS, because PC-dos can tolerate this change.
# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
# Consequently the End keypad key could not be set (it is relatively safe and
# actually useful because it sends ^@ O, which beeps and opens a line above).
ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
use=ansi.sys,
#
# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
use=ansi.sys,
#
# See ansi.sysk and nansi.sys above.
nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
use=ansi.sysk,
#### ANSI console types
#
#### BeOS
#
# BeOS entry for Terminal program Seems to be almost ANSI
beterm|BeOS Terminal,
am, eo, mir, msgr, xenl, xon,
colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
vpa=\E[%i%p1%dd,
#### Linux consoles
#
# This entry is good for the 1.2.13 or later version of the Linux console.
#
# ***************************************************************************
# * *
# * WARNING: *
# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
# * character. Here are the keymap replacement lines that will set this up: *
# * *
# keycode 15 = Tab Tab
# alt keycode 15 = Meta_Tab
# shift keycode 15 = F26
# string F26 ="\033[Z"
# * *
# * This has to use a key slot which is unfortunate (any unused one will *
# * do, F26 is the higher-numbered one). The change ought to be built *
# * into the kernel tables. *
# * *
# ***************************************************************************
#
# All linux kernels since 1.2.13 (at least) set the screen size
# themselves; this entry assumes that capability.
#
linux-basic|linux console,
am, bce, eo, mir, msgr, xenl, xon,
it#8, ncv#18,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
use=ecma+color,
linux-m|Linux console no color,
colors@, pairs@,
setab@, setaf@, setb@, setf@, use=linux,
# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
# and it matters, turn off <ccc>. The %02x escape used to implement this is
# not supposedly back-portable to older SV curses (although it has worked fine
# on Solaris for several years) and not supported in ncurses versions before
# 1.9.9.
linux-c-nc|linux console with color-change,
ccc,
initc=\E]P%p1%x%p2%{256}%*%{1000}%/%02x%p3%{256}%*%{1000}%/%02x%p4%{256}%*%{1000}%/%02x,
oc=\E]R, use=linux-basic,
# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
linux-c|linux console 1.3.6+ for older ncurses,
ccc,
initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
oc=\E]R, use=linux-basic,
# The 2.2.x kernels add a private mode that sets the cursor type; use that to
# get a block cursor for cvvis.
# reported by Frank Heckenbach <frank@g-n-u.de>.
linux|linux console,
civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
cvvis=\E[?25h\E[?8c, use=linux-c-nc,
# Subject: linux 2.6.26 vt back_color_erase
# Changes to the Linux console driver broke bce model as reported in
# https://bugzilla.novell.com/show_bug.cgi?id=418613
# apparently from
# http://lkml.org/lkml/2008/4/26/305
# http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
linux2.6.26|linux console w/o bce,
bce@, use=linux,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
linux-nic|linux with ich/ich1 suppressed for non-curses programs,
ich@, ich1@, use=linux,
# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
linux-koi8|linux with koi8 alternate character set,
acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
use=linux, use=klone+koi8acs,
# Another entry for KOI8-r with Qing Long's acsc.
# (which one better complies with the standard?)
linux-koi8r|linux with koi8-r alternate character set,
use=linux, use=klone+koi8acs,
# Entry for the latin1 and latin2 fonts
linux-lat|linux with latin1 or latin2 alternate character set,
acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
use=linux,
# This uses graphics from VT codeset instead of from cp437.
# reason: cp437 (aka "straight to font") is not functional under luit.
# from: Andrey V Lukyanov <land@long.yar.ru>.
linux-vt|linux console using VT codes for graphics,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
smpch@, use=linux,
# This is based on the Linux console (relies on the console to perform some
# of the functionality), but does not recognize as many control sequences.
# The program comes bundled with an old (circa 1998) copy of the Linux
# console terminfo. It recognizes some non-ANSI/VT100 sequences such as
# \E* move cursor to home, as as \E[H
# \E,X same as \E(X
# \EE move cursor to beginning of row
# \E[y,xf same as \E[y,xH
#
# Note: The status-line support is buggy (dsl does not work).
kon|kon2|jfbterm|Kanji ON Linux console,
ccc@, hs,
civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
use=linux,
#### Mach
#
# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
mach|Mach Console,
am, km,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
smso=\E[7m, smul=\E[4m,
mach-bold|Mach Console with bold instead of underline,
rmul=\E[0m, smul=\E[1m, use=mach,
mach-color|Mach Console with ANSI color,
colors#8, pairs#64,
dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
# From: Marcus Brinkmann
# http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
#
# Comments in the original are summarized here:
#
# hurd uses 8-bit characters (km).
#
# Although it doesn't do XON/XOFF, we don't want padding characters (xon).
#
# Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
# have the eat_newline_glitch. It doesn't support setting or removing tab
# stops (hts/tbc).
#
# hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
# one byte instead three.
#
# <ich1> is not included because hurd has insert mode.
#
# hurd doesn't use ^J for scrolling, because this could put things into the
# scrollback buffer.
#
# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
# This is a GNU extension.
#
# The original has commented-out ncv, but is restored here.
#
# Reading the source, RIS resets cnorm, but not xmous.
hurd|The GNU Hurd console server,
am, bce, bw, eo, km, mir, msgr, xon,
colors#8, it#8, ncv#18, pairs#64,
acsc=++\,\,--..00ii``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
gsbom=\E[>1h,
#### OSF Unix
#
# OSF/1 1.1 Snapshot 2
pmcons|pmconsole|PMAX console,
am,
cols#128, lines#57,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
# SCO console and SOS-Syscons console for 386bsd
# (scoansi: had unknown capabilities
# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
# on the <smacs>=\E[12m -- esr)
#
# klone+sgr-dumb is an error since the acsc does not match -TD
#
# In this description based on SCO's keyboard(HW) manpage list of default
# function key values:
# F13-F24 are shifted F1-F12
# F25-F36 are control F1-F12
# F37-F48 are shift+control F1-F12
#
# hpa/vpa work in the console, but not in scoterm:
# hpa=\E[%p1%dG,
# vpa=\E[%p1%dd,
#
# SCO's terminfo uses
# kLFT=\E[d,
# kRIT=\E[c,
# which do not work (console or scoterm).
#
# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
scoansi-old|SCO Extended ANSI standard crt (5.0.5),
OTbs, am, bce, eo, xon,
colors#8, cols#80, it#8, lines#25, pairs#64,
acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
scoansi-new|SCO Extended ANSI standard crt (5.0.6),
km,
civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
use=scoansi-old,
# make this easy to change...
scoansi|SCO Extended ANSI standard crt,
use=scoansi-old,
# This actually describes the generic SVr4 display driver for Intel boxes.
# The <dim=\E[2m> isn't documented and therefore may not be reliable.
# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
att6386|at386|386at|AT&T WGS 6386 console,
am, bw, eo, xon,
cols#80, it#8, lines#25,
acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
sc=\E7,
sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
tbc=\E[2g, vpa=\E[%i%p1%dd, use=klone+color,
# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
pc6300plus|AT&T 6300 plus,
OTbs, am, xon,
cols#80, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# From: Benjamin C. W. Sittler <bsittler@nmt.edu>
#
# I have a UNIX PC which I use as a terminal attached to my Linux PC.
# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
# is broken. All the special key sequences are broken, making it unusable
# with Emacs. The problem stems from the following:
#
# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
# keypad!), loadable fonts, and strange highlighting modes ("dithered"
# half-intensity, "smeared" bold, and real strike-out, for example.) It also
# uses resizable terminal windows, but the bundled terminal program always
# uses an 80x24 window (and doesn't support seem to support a 132-column
# mode.)
#
# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
# library which was a superset of SVr3.5 curses (called tam, for "terminal
# access method".) tam includes support for real, overlapping windows,
# onscreen function key labels, and bitmap graphics. But since the primary
# user interface on the UNIX PC was a GUI program (ua, for "user
# assistant",) and remote administration was considered important for the
# machine, tam also supported VT100-compatible terminals attached to the
# serial port or used across the StarLan network. To simulate the extra keys
# not present on a VT100, users could press ESC and a two-letter sequence,
# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
# however, were not the same as those sent by the actual Undo key. The
# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
# (If you're interested in adding some of the tam calls to ncurses, btw, I
# have the full documentation and several programs which use tam. It also
# used an extended terminfo format to describe key sequences, special
# highlighting modes, etc.)
#
# KEYS: This means that ncurses would quite painful on the UNIX PC, since
# there are two sequences for every key-modifier combination (local keyboard
# sequence and remote "VT100" sequence.) But I doubt many people are trying
# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
# seem to have been built from the manual describing the VT100 sequences.
# This means it doesn't work for a real live UNIX PC.
#
# FONTS: The UNIX PC also has a strange interpretation of "alternate
# character set". Rather than the VT100 graphics you might expect, it allows
# up to 8 custom fonts to be loaded at any given time. This means that
# programs expecting VT100 graphics will usually be disappointed. For this
# reason I have disabled the smacs/rmacs sequences, but they could easily be
# re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
# manpage), should you wish to do so:
#
# SGR10 - Select font 0 - ESC [ 10 m or SO
# SGR11 - Select font 1 - ESC [ 11 m or SI
# SGR12 - Select font 2 - ESC [ 12 m
# ... (etc.)
# SGR17 - Select font 7 - ESC [ 17 m
#
# Graphics for line drawing are not reliably found at *any* character
# location because the UNIX PC has dynamically reloadable fonts. I use font
# 0 for regular text and font 1 for italics, but this is by no means
# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
#
# MISC: The cursor visible/cursor invisible sequences were swapped in the
# distributed terminfo.
#
# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
# the UNIX PC terminfo entry. The modified version works great with Lynx,
# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
# attached by serial cable. In Emacs, even the Undo key works, and many
# applications can now use the F1-F8 keys.
#
# esr's notes:
# Terminfo entry for the AT&T Unix PC 7300
# from escape(7) in Unix PC 7300 Manual.
# Somewhat similar to a vt100-am (but different enough
# to redo this from scratch.)
#
# /***************************************************************
# *
# * FONT LOADING PROGRAM FOR THE UNIX PC
# *
# * This routine loads a font defined in the file ALTFONT
# * into font memory slot #1. Once the font has been loaded,
# * it can be used as an alternative character set.
# *
# * The call to ioctl with the argument WIOCLFONT is the key
# * to this routine. For more information, see window(7) in
# * the PC 7300 documentation.
# ***************************************************************/
# #include <string.h> /* needed for strcpy call */
# #include <sys/window.h> /* needed for ioctl call */
# #define FNSIZE 60 /* font name size */
# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
# /*
# * The file /usr/lib/wfont/special.8.ft comes with the
# * standard PC software. It defines a graphics character set
# * similar to that of the Teletype 5425 terminal. To view
# * this or other fonts in /usr/lib/wfont, use the command
# * cfont <filename>. For further information on fonts see
# * cfont(1) in the PC 7300 documentation.
# */
#
# struct altfdata /* structure for alt font data */
# {
# short altf_slot; /* memory slot number */
# char altf_name[FNSIZE]; /* font name (file name) */
# };
# ldfont()
# {
# int wd; /* window in which altfont will be */
# struct altfdata altf;
# altf.altf_slot=1;
# strcpy(altf.altf_name,ALTFONT);
# for (wd =1; wd < 12; wd++) {
# ioctl(wd, WIOCLFONT,&altf);
# }
# }
#
# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
# they're confirmed by the man page for the System V display---esr)
#
att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
am, xon,
cols#80, it#8, lines#24,
bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
smul=\E[4m,
# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
# for the application keypad mode. We have added iris-ansi-ap rather than
# change the original to keypad mode.
#
# (iris-ansi: added rmam/smam based on init string -- esr)
#
# This entry, and those derived from it, is used in xwsh (also known as
# winterm). Some capabilities that do not fit into the terminfo model
# include the shift- and control-functionkeys:
#
# F1-F12 generate different codes when shift or control modifiers are used.
# For example:
# F1 \E[001q
# shift F1 \E[013q
# control-F1 \E[025q
#
# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
# \EOP to \EOS. The shifted and control modifiers still do the same thing.
#
# The cursor keys also have different codes:
# control-up \E[162q
# control-down \E[165q
# control-left \E[159q
# control-right \E[168q
#
# shift-up \E[161q
# shift-down \E[164q
# shift-left \E[158q
# shift-right \E[167q
#
# control-tab \[072q
#
iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
am,
cols#80, it#8, lines#40,
bel=^G, bold=\E[1m, clear=\E[H\E[2J,
cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
tbc=\E[3g,
iris-ansi-ap|IRIS ANSI in application-keypad mode,
is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
# (T.Dickey 98/1/24)
iris-color|xwsh|IRIX ANSI with color,
ncv#33,
csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
rmul=\E[24m, rs1=\Ec,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sitm=\E[3m, use=vt100+enq, use=klone+color,
use=iris-ansi-ap,
# The following is a version of the ibm-pc entry distributed with PC/IX,
# (Interactive Systems' System 3 for the Big Blue), modified by Richard
# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
# (the former is untrue, and the latter failed under UCB/man); standout and
# underline modes have been added. Note: this entry describes the "native"
# capabilities of the PC monochrome display, without ANY emulation; most
# communications packages (but NOT PC/IX connect) do some kind of emulation.
pcix|PC/IX console,
am, bw, eo,
cols#80, lines#24,
clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
smul=\E[4m,
# (ibmpcx: this entry used to be known as ibmx.
# It formerly included the following extension capabilities:
# :GC=b:GL=v:GR=t:RT=^J:\
# :GH=\E[196g:GV=\E[179g:\
# :GU=\E[193g:GD=\E[194g:\
# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
# what was there before. -- esr)
ibmpcx|xenix|ibmx|IBM PC xenix console display,
OTbs, am, msgr,
cols#80, lines#25,
clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
kpp=\E[Z, use=klone+acs, use=klone+sgr8,
#### QNX
#
# QNX 4.0 Console
# Michael's original version of this entry had <am@>, <smcup=\Ei>,
# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
# right corner without triggering a scroll. The ncurses terminfo library can
# handle this case with the <ich1> capability, and prefers <am> for better
# optimization. Bug: The <op> capability resets attributes.
# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
qnx|qnx4|qnx console,
daisy, km, mir, msgr, xhpa, xt,
colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
kDL=\377\366, kEND=\377\301, kEOL=\377\311,
kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
kclo=\377\343, kclr=\377\341, kcmd=\377\245,
kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
kext=\377\270, kf1=\377\201, kf10=\377\212,
kf11=\377\256, kf12=\377\257, kf13=\377\213,
kf14=\377\214, kf15=\377\215, kf16=\377\216,
kf17=\377\217, kf18=\377\220, kf19=\377\221,
kf2=\377\202, kf20=\377\222, kf21=\377\223,
kf22=\377\224, kf23=\377\333, kf24=\377\334,
kf25=\377\225, kf26=\377\226, kf27=\377\227,
kf28=\377\230, kf29=\377\231, kf3=\377\203,
kf30=\377\232, kf31=\377\233, kf32=\377\234,
kf33=\377\235, kf34=\377\236, kf35=\377\276,
kf36=\377\277, kf37=\377\321, kf38=\377\322,
kf39=\377\323, kf4=\377\204, kf40=\377\324,
kf41=\377\325, kf42=\377\326, kf43=\377\327,
kf44=\377\330, kf45=\377\331, kf46=\377\332,
kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
khlp=\377\350, khome=\377\240, khts=\377\342,
kich1=\377\253, kil1=\377\273, kind=\377\261,
kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
knp=\377\252, knxt=\377\312, kopn=\377\357,
kopt=\377\353, kpp=\377\242, kprt=\377\255,
kprv=\377\302, krdo=\377\336, kref=\377\354,
kres=\377\360, krfr=\377\347, kri=\377\271,
krmir=\377\313, krpl=\377\362, krst=\377\352,
ksav=\377\361, kslt=\377\247, kspd=\377\335,
ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
smso=\E(, smul=\E[,
#
#
qnxt|qnxt4|QNX4 terminal,
crxm, use=qnx4,
#
qnxm|QNX4 with mouse events,
maddr#1,
chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
smicm=\E/>2h, use=qnx4,
#
qnxw|QNX4 windows,
xvpa, use=qnxm,
#
# Monochrome QNX4 terminal or console. Setting this terminal type will
# allow an application running on a color console to behave as if it
# were a monochrome terminal. Output will be through stdout instead of
# console writes because the term routines will recognize that the
# terminal name starts with 'qnxt'.
#
qnxtmono|Monochrome QNX4 terminal or console,
colors@, pairs@,
scp@, use=qnx4,
# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
# (esr: commented out <scp> and <rmcup> to avoid warnings.)
# (TD: derive from original qnx4 entry)
qnxt2|qnx 2.15 serial terminal,
am,
civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
# QNX ANSI terminal definition
qansi-g|QNX ANSI,
am, eslok, hs, xon,
colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
smul=\E[4m, tbc=\E[2g,
tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
#
qansi|QNX ansi with console writes,
daisy, xhpa, use=qansi-g,
#
qansi-t|QNX ansi without console writes,
crxm, use=qansi,
#
qansi-m|QNX ansi with mouse,
maddr#1,
chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
smicm=\E[>2h, use=qansi,
#
qansi-w|QNX ansi for windows,
xvpa, use=qansi-m,
#### NetBSD consoles
#
# pcvt termcap database entries (corresponding to release 3.31)
# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
#
# (For the terminfo master file, I translated these into terminfo syntax.
# Then I dropped all the pseudo-HP entries. we don't want and can't use
# the :Xs: flag. Then I split :is: into a size-independent <is1> and a
# size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
# NOTE: <ich1> has been taken out of this entry. for reference, it should
# be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
pcvtXX|pcvt vt200 emulator (DEC VT220),
am, km, mir, msgr, xenl,
it#8, vt#3,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
# 50 lines entries; 80 columns
pcvt25|dec vt220 emulation with 25 lines,
cols#80, lines#25,
is2=\E[1;25r\E[25;1H, use=pcvtXX,
pcvt28|dec vt220 emulation with 28 lines,
cols#80, lines#28,
is2=\E[1;28r\E[28;1H, use=pcvtXX,
pcvt35|dec vt220 emulation with 35 lines,
cols#80, lines#35,
is2=\E[1;35r\E[35;1H, use=pcvtXX,
pcvt40|dec vt220 emulation with 40 lines,
cols#80, lines#40,
is2=\E[1;40r\E[40;1H, use=pcvtXX,
pcvt43|dec vt220 emulation with 43 lines,
cols#80, lines#43,
is2=\E[1;43r\E[43;1H, use=pcvtXX,
pcvt50|dec vt220 emulation with 50 lines,
cols#80, lines#50,
is2=\E[1;50r\E[50;1H, use=pcvtXX,
# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
# 50 lines entries; 132 columns
pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
cols#132, lines#25,
is2=\E[1;25r\E[25;1H, use=pcvtXX,
pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
cols#132, lines#28,
is2=\E[1;28r\E[28;1H, use=pcvtXX,
pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
cols#132, lines#35,
is2=\E[1;35r\E[35;1H, use=pcvtXX,
pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
cols#132, lines#40,
is2=\E[1;40r\E[40;1H, use=pcvtXX,
pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
cols#132, lines#43,
is2=\E[1;43r\E[43;1H, use=pcvtXX,
pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
cols#132, lines#50,
is2=\E[1;50r\E[50;1H, use=pcvtXX,
# OpenBSD implements a color variation
pcvt25-color|dec vt220 emulation with 25 lines and color,
cols#80, lines#25,
is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
use=ecma+color,
# Terminfo entries to enable the use of the ncurses library in colour on a
# NetBSD-arm32 console (only tested on a RiscPC).
# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
# modified codes for setf/setb to setaf/setab, then to klone+color, corrected
# typo in invis - TD
arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
am, bce, msgr, xenl, xon,
cols#80, it#8, lines#30,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
use=klone+color,
arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
cols#132, lines#50, use=arm100,
# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
# manufactured by Sharp for the Japenese market.
# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
x68k|x68k-ite|NetBSD/x68k ITE,
cols#96, lines#32,
kclr=\E[9~, khlp=\E[28~, use=vt220,
# <tv@pobox.com>:
# Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
#
# (still unfinished, but good enough so far.)
ofcons|DNARD OpenFirmware console,
bw,
cols#80, lines#30,
bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
rmso=\2330m, rmul=\2330m,
sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
sgr0=\2330m,
# NetBSD "wscons" emulator in vt220 mode.
# This entry is based on the NetBSD termcap entry, correcting the ncv value.
# The emulator renders underlined text in red. Colors are otherwise usable.
#
# Testing the emulator and reading the source code (NetBSD 2.0), it appears
# that "vt220" is inaccurate. There are a few vt220-features, but most of the
# vt220 screens in vttest do not work with this emulator. For instance, it
# identifies itself (primary DA response) as a vt220 with selective erase. But
# the selective erase feature does not work. The secondary response is copied
# from Kermit's emulation of vt220, does not correspond to actual vt220. At
# the level of detail in a termcap, it is a passable emulator, since ECH does
# work. Don't use it on a VMS system -TD
wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
bce, msgr,
colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, khome=\E[7~, op=\E[m, setab=\E[4%p1%dm,
setaf=\E[3%p1%dm, use=vt220,
wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
km, use=wsvt25,
# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
# DECstation/pmax.
rcons|BSD rasterconsole,
use=sun-il,
# Color version of above. Color currently only provided by NetBSD.
rcons-color|BSD rasterconsole with ANSI color,
bce,
colors#8, pairs#64,
op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
# mgterm -- MGL/MGL2, MobileGear Graphic Library
# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
# -- compare with cons25w
mgterm,
OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
colors#8, cols#80, it#8, lines#18, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
#### FreeBSD console entries
#
# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
# Andrey Chernov maintains the FreeBSD termcap distributions.
#
# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
# or comment out the :cb: capability in the console entry.
#
# Alexander Lukyanov reports:
# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
# Now el1 clears not only to the line beginning, but also a large chunk
# of previous line. But there is another bug - ech does not work at all.
#
# for syscons
# common entry without semigraphics
# Bug: The <op> capability resets attributes.
# Bug? The ech and el1 attributes appear to move the cursor in some cases; for
# instance el1 does if the cursor is moved to the right margin first. Removed
# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
#
# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
# Note that this disables standout with color.
#
# The emulator sends difference strings based on shift- and control-keys,
# like scoansi:
# F13-F24 are shifted F1-F12
# F25-F36 are control F1-F12
# F37-F48 are shift+control F1-F12
cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
am, bce, bw, eo, msgr, npc,
colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
use=cons25w,
cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
colors@, pairs@,
bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
smul=\E[4m, use=cons25,
cons30|ansi80x30|freebsd console (30-line ansi mode),
lines#30, use=cons25,
cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
lines#30, use=cons25-m,
cons43|ansi80x43|freebsd console (43-line ansi mode),
lines#43, use=cons25,
cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
lines#43, use=cons25-m,
cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
lines#50, use=cons25,
cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
lines#50, use=cons25-m,
cons60|ansi80x60|freebsd console (60-line ansi mode),
lines#60, use=cons25,
cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
lines#60, use=cons25-m,
cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
use=cons25w,
cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
colors@, pairs@,
op@, rmul=\E[m, setab@, setaf@,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
smul=\E[4m, use=cons25r,
cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
lines#50, use=cons25r,
cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
lines#50, use=cons25r-m,
cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
lines#60, use=cons25r,
cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
lines#60, use=cons25r-m,
# ISO 8859-1 FreeBSD console
cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
use=cons25w,
cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
colors@, pairs@,
bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
smul=\E[4m, use=cons25l1,
cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
lines#50, use=cons25l1,
cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
lines#50, use=cons25l1-m,
cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
lines#60, use=cons25l1,
cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
lines#60, use=cons25l1-m,
#### 386BSD and BSD/OS Consoles
#
# This was the original 386BSD console entry (I think).
# Some places it's named oldpc3|oldibmpc3.
# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
origpc3|origibmpc3|IBM PC 386BSD Console,
OTbs, am, bw, eo, xon,
cols#80, lines#25,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
OTbs, km,
lines#25,
bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
# Note, the emulator supports many of the additional console features
# listed in the iBCS2 (e.g. character-set selection) though not all
# are described here. This entry really ought to be upgraded.
# Also note, the console will also work with fewer lines after doing
# "stty rows NN", e.g. to use 24 lines.
# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
# Bug: The <op> capability resets attributes.
bsdos-pc|IBM PC BSD/OS Console,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
use=bsdos-pc-nobold,
bsdos-pc-nobold|BSD/OS PC console w/o bold,
use=klone+color, use=bsdos-pc-m,
bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
OTbs, am, eo, km, xon,
cols#80, it#8, lines#25,
bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
use=klone+sgr8,
# Old names for BSD/OS PC console used in releases before 4.1.
pc3|BSD/OS on the PC Console,
use=bsdos-pc-nobold,
ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
use=bsdos-pc,
# BSD/OS on the SPARC
bsdos-sparc|Sun SPARC BSD/OS Console,
use=sun,
# BSD/OS on the PowerPC
bsdos-ppc|PowerPC BSD/OS Console,
use=bsdos-pc,
#### DEC VT52
# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
#
# Actually (TD pointed this out at the time the acsc string was added):
# vt52 shouldn't define full acsc since most of the cells don't match.
# see vt100 manual page A-31. This is the list that does match:
# f degree
# g plus/minus
# h right-arrow
# k down-arrow
# m scan-1
# o scan-3
# q scan-5
# s scan-7
# The line-drawing happens to work in several terminal emulators, but should
# not be used as a guide to the capabilities of the vt52. Note in particular
# that vt52 does not support line-drawing characters (the scan-X values refer
# to a crude plotting feature) -TD
vt52|dec vt52,
OTbs,
cols#80, it#8, lines#24,
acsc=ffgghhompoqqss.k, bel=^G, clear=\EH\EJ, cr=^M,
cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
#### DEC VT100 and compatibles
#
# DEC terminals from the vt100 forward are collected here. Older DEC terminals
# and micro consoles can be found in the `obsolete' section. More details on
# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
# found near the end of this file.
#
# Except where noted, these entries are DEC's official terminfos.
# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
# Engineering for more information. Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
# In October 1995 DEC sold its terminals business, including the VT and Dorio
# line and trademark, to SunRiver Data Systems. SunRiver has since changed
# its name to Boundless Technologies; see http://www.boundless.com.
#
# NOTE: Any VT100 emulation, whether in hardware or software, almost
# certainly includes what DEC called the `Level 1 editing extension' codes;
# only the very oldest VT100s lacked these and there probably aren't any of
# those left alive. To capture these, use one of the VT102 entries.
#
# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
# since the cursor is left in a different position while in the
# weird state (concept at beginning of next line, vt100 at end
# of this line) so all versions of vi before 3.7 don't handle
# <xenl> right on vt100. The correct way to handle <xenl> is when
# you output the char in column 80, immediately output CR LF
# and then assume you are in column 1 of the next line. If <xenl>
# is on, am should be on too.
#
# I assume you have smooth scroll off or are at a slow enough baud
# rate that it doesn't matter (1200? or less). Also this assumes
# that you set auto-nl to "on", if you set it off use vt100-nam
# below.
#
# The padding requirements listed here are guesses. It is strongly
# recommended that xon/xoff be enabled, as this is assumed here.
#
# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
# tab settings are in non-volatile memory and don't need to be
# reset upon login. Also setting the number of columns glitches
# the screen annoyingly. You can type "reset" to get them set.
#
# The VT100 series terminals have cursor ("arrows") keys which can operate
# in two different modes: Cursor Mode and Application Mode. Cursor Mode
# is the reset state, and is assumed to be the normal state. Application
# Mode is the "set" state. In Cursor Mode, the cursor keys transmit
# "Esc [ {code}" sequences, conforming to ANSI standards. In Application
# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
# was provided primarily as an aid to the porting of VT52 applications. It is
# assumed that the cursor keys are normally in Cursor Mode, and expected that
# applications such as vi will always transmit the <smkx> string. Therefore,
# the definitions for the cursor keys are made to match what the terminal
# transmits after the <smkx> string is transmitted. If the <smkx> string
# is a null string or is not defined, then cursor keys are assumed to be in
# "Cursor Mode", and the cursor keys definitions should match that assumption,
# else the application may fail. It is also expected that applications will
# always transmit the <rmkx> string to the terminal before they exit.
#
# The VT100 series terminals have an auxiliary keypad, commonly referred to as
# the "Numeric Keypad", because it is a cluster of numeric and function keys.
# The Numeric Keypad which can operate in two different modes: Numeric Mode and
# Application Mode. Numeric Mode is the reset state, and is assumed to be
# the normal state. Application Mode is the "set" state. In Numeric Mode,
# the numeric and punctuation keys transmit ASCII 7-bit characters, and the
# Enter key transmits the same as the Return key (Note: the Return key
# can be configured to send either LF (\015) or CR LF). In Application Mode,
# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
# always send the same "Esc O {code}" sequences. It is assumed that the keypad
# is normally in Numeric Mode. If an application requires that the keypad be
# in Application Mode then it is expected that the user, or the application,
# will set the TERM environment variable to point to a terminfo entry which has
# defined the <smkx> string to include the codes that switch the keypad into
# Application Mode, and the terminfo entry will also define function key
# fields to match the Application Mode control codes. If the <smkx> string
# is a null string or is not defined, then the keypad is assumed to be in
# Numeric Mode. If the <smkx> string switches the keypad into Application
# Mode, it is expected that the <rmkx> string will contain the control codes
# necessary to reset the keypad to "Normal" mode, and it is also expected that
# applications which transmit the <smkx> string will also always transmit the
# <rmkx> string to the terminal before they exit.
#
# Here's a diagram of the VT100 keypad keys with their bindings.
# The top line is the name of the key (some DEC keyboards have the keys
# labelled somewhat differently, like GOLD instead of PF1, but this is
# the most "official" name). The second line is the escape sequence it
# generates in Application Keypad mode (where "$" means the ESC
# character). The third line contains two items, first the mapping of
# the key in terminfo, and then in termcap.
# _______________________________________
# | PF1 | PF2 | PF3 | PF4 |
# | $OP | $OQ | $OR | $OS |
# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
# | 7 8 9 - |
# | $Ow | $Ox | $Oy | $Om |
# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
# | 4 | 5 | 6 | , |
# | $Ot | $Ou | $Ov | $Ol |
# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
# | 1 | 2 | 3 | |
# | $Oq | $Or | $Os | enter |
# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
# | 0 | . | |
# | $Op | $On | |
# |___kc1_______K4____|_kc3__K5_|_kent_@8_|
#
# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
# terminfo guidelines. That is a compromise used to assign the remaining
# keys on the keypad to kf5-kf0, used on older systems with legacy termcap
# support:
vt100+keypad|dec vt100 numeric keypad no fkeys,
ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
vt100+pfkeys|dec vt100 numeric keypad,
kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
use=vt100+keypad,
vt100+fnkeys|dec vt100 numeric keypad,
kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
kf9=\EOw, use=vt100+pfkeys,
#
# A better adaptation to modern keyboards such as the PC's, which have a dozen
# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
# use the 5-key arrangement to model the arrow keys as suggested in the
# terminfo guidelines:
# _______________________________________
# | PF1 | PF2 | PF3 | PF4 |
# | $OP | $OQ | $OR | $OS |
# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
# | 7 8 9 - |
# | $Ow | $Ox | $Oy | $Om |
# |_ka1__K1_|_________|_ka3__K3_|_________|
# | 4 | 5 | 6 | , |
# | $Ot | $Ou | $Ov | $Ol |
# |_________|_kb2__K2_|_________|_________|
# | 1 | 2 | 3 | |
# | $Oq | $Or | $Os | enter |
# |_kc1__K4_|_________|_kc3__K5_| $OM |
# | 0 | . | |
# | $Op | $On | |
# |___________________|_________|_kent_@8_|
#
vt220+keypad|dec vt220 numeric keypad,
ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
kb3=\EOv, kc2=\EOr,
#
vt100+enq|ncurses extension for vt100-style ENQ,
u8=\E[?1;2c, use=ansi+enq,
vt102+enq|ncurses extension for vt102-style ENQ,
u8=\E[?6c, use=ansi+enq,
#
# And here, for those of you with orphaned VT100s lacking documentation, is
# a description of the soft switches invoked when you do `Set Up'.
#
# Scroll 0-Jump Shifted 3 0-#
# | 1-Smooth | 1-British pound sign
# | Autorepeat 0-Off | Wrap Around 0-Off
# | | 1-On | | 1-On
# | | Screen 0-Dark Bkg | | New Line 0-Off
# | | | 1-Light Bkg | | | 1-On
# | | | Cursor 0-Underline | | | Interlace 0-Off
# | | | | 1-Block | | | | 1-On
# | | | | | | | |
# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
# | | | | | | | |
# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
# | | | 1-On | | | 1-50 Hz
# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
# | | 1-ANSI | | 1-8 Bits
# | Keyclick 0-Off | Parity 0-Off
# | 1-On | 1-On
# Margin Bell 0-Off Parity Sense 0-Odd
# 1-On 1-Even
#
# The following SET-UP modes are assumed for normal operation:
# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
# WRAP_AROUND_ON JUMP_SCROLL_OFF
# Other SET-UP modes may be set for operator convenience or communication
# requirements; I recommend
# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
# Unless you have a graphics add-on such as Digital Engineering's VT640
# (and even then, whenever it can be arranged!) you should set
# INTERLACE_OFF
#
# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
vt100|vt100-am|dec vt100 (w/advanced video),
OTbs, am, mc5i, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
use=vt100+fnkeys,
vt100nam|vt100-nam|vt100 no automargins,
am@, xenl@, use=vt100-am,
vt100-vb|dec vt100 (w/advanced video) & no beep,
bel@, flash=\E[?5h\E[?5l, use=vt100,
# Ordinary vt100 in 132 column ("wide") mode.
vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
cols#132, lines#24,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
cols#132, lines#14, vt@,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
# vt100 with no advanced video.
vt100-nav|vt100 without advanced video option,
xmc#1,
blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
smul@, use=vt100,
vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
cols#132, lines#14, use=vt100-nav,
# vt100 with one of the 24 lines used as a status line.
# We put the status line on the top.
vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
eslok, hs,
lines#23,
clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
# Status line at bottom.
# Clearing the screen will clobber status line.
vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
eslok, hs,
lines#23,
dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
# Most of the `vt100' emulators out there actually emulate a vt102
# This entry (or vt102-nsgr) is probably the right thing to use for
# these.
vt102|dec vt102,
dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
use=vt100,
vt102-w|dec vt102 in wide mode,
cols#132,
rs3=\E[?3h, use=vt102,
# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
# fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
# string in the canonical vt100 entry above leaves the screen littered
# with little snowflake or star characters (IBM PC ROM character \017 = ^O)
# after highlight turnoffs. This entry should fix that, and even leave
# ACS support working, at the cost of making multiple-highlight changes
# slightly more expensive.
# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
sgr@, sgr0=\E[m, use=vt102,
# VT125 Graphics CRT. Clear screen also erases graphics
# Some vt125's came configured with vt102 support.
vt125|vt125 graphics terminal,
mir,
clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
# This isn't a DEC entry, it came from University of Wisconsin.
# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
vt131|dec vt131,
OTbs, am, xenl,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
rmul=\E[m$<2/>,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2/>, smul=\E[4m$<2/>,
# vt132 - like vt100 but slower and has ins/del line and such.
# I'm told that <smir>/<rmir> are backwards in the terminal from the
# manual and from the ANSI standard, this describes the actual
# terminal. I've never actually used a vt132 myself, so this
# is untested.
#
vt132|DEC vt132,
xenl,
dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
# This vt220 description maps F5--F9 to the second block of function keys
# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
# PF1--PF4 are used as F1--F4.
#
vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
OTbs, OTpt, am, mir, xenl, xon,
cols#80, lines#24, vt#3,
OTnl=^J,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
# A much better description of the VT200/220; used to be vt220-8
# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
# designation to accommodate bug in pcvt -TD
vt220|vt200|dec vt220,
OTbs, am, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i,
mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
rmul=\E[24m, rs1=\E[?3l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m, tbc=\E[3g,
vt220-w|vt200-w|DEC vt220 in wide mode,
cols#132,
rs3=\E[?3h, use=vt220,
vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
OTbs, am, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
ich=\233%p1%d@, if=/usr/share/tabset/vt100,
il=\233%p1%dL, il1=\233L, ind=\ED,
is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B,
rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m,
rs1=\233?3l, sc=\E7,
sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
smso=\2337m, smul=\2334m, tbc=\2333g,
# vt220d:
# This vt220 description regards F6--F10 as the second block of function keys
# at the top of the keyboard. This mapping follows the description given
# in the VT220 Programmer Reference Manual and agrees with the labeling
# on some terminals that emulate the vt220. There is no support for an F5.
# See vt220 for an alternate mapping.
#
vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
am@,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
# (not an official DEC entry!)
# The problem with real vt220 terminals is they don't send escapes when in
# in vt220 mode. This can be gotten around two ways. 1> don't send
# escapes or 2> put the vt220 into vt100 mode and use all the nifty
# features of vt100 advanced video which it then has.
#
# This entry takes the view of putting a vt220 into vt100 mode so
# you can use the escape key in emacs and everything else which needs it.
#
# You probably don't want to use this on a VMS machine since VMS will think
# it has a vt220 and will get fouled up coming out of emacs
#
# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
vt200-js|vt220-js|dec vt200 series with jump scroll,
am,
cols#80,
bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
il1=\E[L, ind=\ED,
is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
# This was DEC's vt320. Use the purpose-built one below instead
#vt320|DEC VT320 in vt100 emulation mode,
# use=vt220,
# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
#
vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
am@,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
# These entries are not DEC's official ones, they were purpose-built for the
# VT320. Here are the designer's notes:
# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
# khome is Home on a PC kbd. Actually 'FIND' on a VT.
# Things that use <knxt> usually use tab anyways... and things that don't use
# tab usually use <knxt> instead...
# kprv is same as tab - Backtab is useless...
# I left out <sgr> because of its RIDICULOUS complexity,
# and the resulting fact that it causes the termcap translation of the entry
# to SMASH the 1k-barrier...
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
# (vt320: uncommented <fsl> --esr)
vt320|vt300|dec vt320 7 bit terminal,
am, eslok, hs, mir, msgr, xenl,
cols#80, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
il1=\E[L, ind=\ED,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i,
mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
am@,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
use=vt320,
# We have to init 132-col mode, not 80-col mode.
vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
cols#132, wsl#132,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
use=vt320,
vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
am@,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
use=vt320-w,
# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
# which are pretty much a superset of the VT320. They have the
# host writable status line, yet another different DRCS matrix size,
# and such, but they add the DEC Technical character set, Multiple text
# pages, selectable length pages, and the like. The difference between
# the vt330 and vt340 is that the latter has only 2 planes and a monochrome
# monitor, the former has 4 planes and a color monitor. These terminals
# support VT131 and ANSI block mode, but as with much of these things,
# termcap/terminfo doesn't deal with these features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
# arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap or terminfo entry,
#
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt340: string capability "sb=\E[M" corrected to "sr";
# also, added <rmam>/<smam> based on the init string -- esr)
vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
il1=\E[L, ind=\ED,
is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m, rs1=\E[?3l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[2$~\E[1$}\E[1;%dH,
# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
# (originally written with vt420 as its primary name, and usable for it).
#
# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
# text pages and long text pages with selectable length of the vt340, along
# with left and right margins, rectangular area text copy, fill, and erase
# operations, selected region character attribute change operations,
# page memory and rectangle checksums, insert/delete column, reception
# macros, and other features too numerous to remember right now. TERMCAP
# can only take advantage of a few of these added features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
# arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap entry,
#
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
# also, added <rmam>/<smam> based on the init string -- esr)
vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[2$~\E[1$}\E[1;%dH,
# (vt420: I removed <kf0>, it collided with <kf10>. I also restored
# a missing <sc> -- esr)
vt420|DEC VT420,
am, mir, xenl, xon,
cols#80, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smkx=\E=, smso=\E[7m, smul=\E[4m,
# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
# takes two parameters, the key and the string. Translating the key is
# straightforward (keys 1-5 are not defined on real terminals, though some
# emulators define these):
#
# if (key < 16) then value = key;
# else if (key < 21) then value = key + 1;
# else if (key < 25) then value = key + 2;
# else if (key < 27) then value = key + 3;
# else if (key < 30) then value = key + 4;
# else value = key + 5;
#
# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
# There's no provision in terminfo for emitting a string in this format, so the
# application has to know it.
#
vt420pc|DEC VT420 w/PC keyboard,
kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[H,
pctrm=USR_TERM\:vt420pcdos\:,
pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
use=vt420,
vt420pcdos|DEC VT420 w/PC for DOS Merge,
lines#25,
dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
pctrm@,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
use=vt420,
vt510|DEC VT510,
use=vt420,
vt510pc|DEC VT510 w/PC keyboard,
use=vt420pc,
vt510pcdos|DEC VT510 w/PC for DOS Merge,
use=vt420pcdos,
# VT520/VT525
#
# The VT520 is a monochrome text terminal capable of managing up to
# four independent sessions in the terminal. It has multiple ANSI
# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
#
# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
# [Alt]/[Print Screen] depending upon which keyboard and which
# terminal mode is being used. If Set-Up has been disabled or
# assigned to an unknown key, Set-Up may be entered by pressing
# [F3] as the first key after power up, regardless of keyboard type.
# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
vt520|DEC VT520,
am, mir, xenl, xon,
cols#80, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~,
pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
# (vt525: I added <rmam>/<smam> based on the init string;
# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
vt525|DEC VT525,
am, mir, xenl, xon,
cols#80, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~,
pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
#### VT100 emulations
#
# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
# to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
# that this works best with a stock vt100 entry.
dec-vt100|EWAN telnet's vt100 emulation,
use=vt100,
# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
dec-vt220|DOS tnvt200 terminal emulator,
am@, use=vt220,
# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
# anyone who needs PC VT340 emulation. (or anything below that level, for
# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
# RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
# I can send the address if requested.
# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
z340|zstem vt340 terminal emulator 132col 42line,
lines#42,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
use=vt320-w,
z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
am@,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
use=z340,
# CRT is shareware. It implements some xterm features, including mouse.
crt|crt-vt220|CRT 2.3 emulating VT220,
bce, msgr,
ncv@,
hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
# PuTTY 0.55 (released 3 August 2004)
# http://www.chiark.greenend.org.uk/~sgtatham/putty/
#
# Comparing with 0.51, vttest is much better (only a few problems with the
# cursor position reports and wrapping).
#
# PuTTY 0.51 (released 14 December 2000)
#
# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
# well as SCO and Atari, color palettes from Linux console). Reading the code,
# it is intended to be VT102 plus selected features. By default, it sets $TERM
# to xterm, which is incorrect, since several features are misimplemented:
#
# Alt+key always sends ESC+key, so 'km' capability is removed.
#
# Control responses, wrapping and tabs are buggy, failing a couple of
# screens in vttest.
#
# xterm mouse support is not implemented (unrelease version may).
#
# Several features such as backspace/delete are optional; this entry documents
# the default behavior -TD
putty|PuTTY terminal emulator,
am, bce, bw, ccc, hs, mir, msgr, xenl, xon,
colors#8, it#8, ncv#22, pairs#64,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
dch=\E[%p1%dP, dch1=\E[P,
dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX,
ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
indn=\E[%p1%dS,
initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
kb2=\E[G, kbs=\177, kcan=^C, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
rmso=\E[27m, rmul=\E[24m,
rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq,
vt100-putty|Reset PuTTY to pure vt100,
rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
use=vt100,
# palette is hardcoded...
putty-256color|PuTTY 0.58 with xterm 256-colors,
initc@, use=xterm+256color, use=putty,
# One of the keyboard selections is "VT100+".
# pterm (the X11 port) uses shifted F1-F10 as F11-F20
putty-vt100|VT100+ keyboard layout,
kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
kf9=\EOX, use=putty,
# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
# (communication program) which supports:
#
# - Serial port connections.
# - TCP/IP (telnet) connections.
# - VT100 emulation, and selected VT200/300 emulation.
# - TEK4010 emulation.
# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
# Quick-VAN).
# - Scripts using the "Tera Term Language".
# - Japanese and Russian character sets.
#
# The program does not come with terminfo or termcap entries. However, the
# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
# vt52 or doublesize character support; blinking is done with color). Besides
# the HPA, VPA extensions it also implements CPL and CNL.
#
# All of the function keys can be remapped. This description shows the default
# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
# is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
# kfnd Insert
# kslt Delete
# kich1 Home
# kdch1 PageUp
# kpp End
# knp PageDown
#
# ANSI colors are implemented, but cannot be combined with video attributes
# except for reverse.
#
# No fonts are supplied with the program, so the acsc string is chosen to
# correspond with the default Microsoft terminal font.
#
# Tera Term recognizes some xterm sequences, including those for setting and
# retrieving the window title, and for setting the window size (i.e., using
# "resize -s"), though it does not pass SIGWINCH to the application if the
# user resizes the window with the mouse.
teraterm2.3|Tera Term Pro,
km, xon@,
ncv#43, vt@,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
use=klone+color, use=vt100,
# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
# to choose a Windows OEM font).
#
# Testing with tack:
# - it does not have xenl (suppress that)
# - underline seems to work with color (modify ncv).
# Testing with vttest:
# - wrapping differs from vt100 (menu 1).
# - it recognizes xterm's X10 and normal mouse tracking, but none of the
# other flavors.
# - it recognizes the dtterm window controls for reporting size in
# characters and pixels.
# - it passes SIGWINCH.
teraterm4.59|Tera Term Pro,
bce, xenl@,
ncv#41,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
kmous=\E[M, use=teraterm2.3,
teraterm|Tera Term,
use=teraterm4.59,
# Tested with WinNT 4.0, the telnet application assumes the screensize is
# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
#
# Other notes:
# a) Fails tack's cup (cursor-addressing) test, though cup works well enough
# for casual (occasional) use. Also fails several of the vttest screens,
# but that is not unusual for vt100 "emulators".
# b) Does not implement vt100 keypad
# c) Recognizes a subset of vt52 controls.
ms-vt100|MS telnet imitating dec vt100,
lines#25,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
# Tested with Windows 2000, the telnet application runs in a console window,
# also using 'Terminal' font.
#
# Other notes:
# a) This version has no function keys or numeric keypad. Unlike the older
# version, the numeric keypad is entirely ignored.
# b) The program sets $TERM to "ansi", which of course is inaccurate.
ms-vt100-color|vtnt|windows 2000 ansi (sic),
bce,
dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
use=ms-vt100,
# Based on comments from Federico Bianchi:
#
# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
# scheme for PF keys.
#
# and PuTTY wishlist:
#
# The modifiers are represented as the codes listed above, prefixed to
# the normal sequences. If the modifier is pressed alone, its sequence
# is transmitted twice in succession. If multiple modifiers apply,
# they're transmitted in the order shift, control, alt.
#
# Shift \E^S
# Alt \E^A,
# Ctrl \E^C,
ms-vt100+|vt100+|windows XP vt100+ (sic),
kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
knp=\E/, kpp=\E?, use=ms-vt100-color,
ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
use=ms-vt100+,
# a minimal subset of a vt100 (compare with "news-unk).
tt|tkterm|Don Libes' tk text widget terminal emulator,
clear=\E[H\E[J, cr=^M, cuf1=\E[C, cup=\E[%p1%d;%p2%dH,
cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rmso=\E[m,
smso=\E[7m,
#### X terminal emulators
#
# You can add the following line to your .Xdefaults to change the terminal type
# set by the xterms you start up to my-xterm:
#
# *termName: my-xterm
#
# System administrators can change the default entry for xterm instances
# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
# case, xterm will detect and reject an invalid terminal type, falling back
# to the default of xterm.
#
# X10/6.6 11/7/86, minus alternate screen, plus (csr)
# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
# as these seem not to work -- esr)
x10term|vs100-x10|xterm terminal emulator (X10 window system),
OTbs, am, km, mir, msgr, xenl, xon,
cols#80, it#8, lines#65,
bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
smso=\E[7m, smul=\E[4m,
# Compatible with the R5 xterm
# (from the XFree86 3.2 distribution, <blink=@> removed)
# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
# corrected typos in rs2 string - TD
# added u6-u9 -TD
xterm-r5|xterm R5 version,
OTbs, am, km, msgr, xenl,
cols#80, it#8, lines#24,
bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
rmul=\E[m,
rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
sc=\E7,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, use=vt100+enq,
# Compatible with the R6 xterm
# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
# added khome/kend, hts based on the R6 xterm code - TD
# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
# for compatibility with other emulators).
xterm-r6|xterm-old|xterm X11R6 version,
OTbs, am, km, mir, msgr, xenl,
cols#80, it#8, lines#24,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
il1=\E[L, ind=^J,
is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
use=vt100+enq,
# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
# The name has been changed and some aliases have been removed.
xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
OTbs, am, bce, km, mir, msgr, xenl,
cols#80, it#8, lines#24, ncv@,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J,
is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
rmso=\E[27m, rmul=\E[24m, rs1=^O,
rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
use=ecma+color, use=vt220+keypad,
# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
# codes for F1-F4 except while in VT220 mode.
xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
# This version was released in XFree86 3.3.3 (November 1998).
# Besides providing printer support, it exploits a new feature that allows
# xterm to use terminfo-based descriptions with the titeInhibit resource.
# -- the distribution contained incorrect khome/kend values -TD
xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
mc5i,
blink=\E[5m, ich1@, invis=\E[8m,
is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
# This version was released in XFree86 4.0.
xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
npc,
kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
smcup=\E[?1049h, use=xterm-xf86-v333,
# This version was released in XFree86 4.3.
xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
kbeg@,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
use=xterm-xf86-v40,
# This version was released in XFree86 4.4.
xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
rin=\E[%p1%dT, use=xterm-xf86-v43,
xterm-xfree86|xterm terminal emulator (XFree86),
use=xterm-xf86-v44,
# This version reflects the current xterm features.
xterm-new|modern xterm terminal emulator,
npc,
indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H,
kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kb2=\EOE,
kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kend=\EOF, kent=\EOM, khome=\EOH, kich1=\E[2~, kmous=\E[M,
knp=\E[6~, kpp=\E[5~, rin=\E[%p1%dT, use=xterm+pcfkeys,
use=xterm-basic,
#
# This fragment describes as much of XFree86 xterm's "pc-style" function
# keys as will fit into terminfo's 60 function keys.
# From ctlseqs.ms:
# Code Modifiers
# ---------------------------------
# 2 Shift
# 3 Alt
# 4 Shift + Alt
# 5 Control
# 6 Shift + Control
# 7 Alt + Control
# 8 Shift + Alt + Control
# ---------------------------------
# The meta key may also be used as a modifier in this scheme, adding another
# bit to the parameter.
xterm+pcfkeys|fragment for PC-style fkeys,
use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
use=xterm+pce2,
#
xterm+noapp|fragment with cursor keys in normal mode,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
khome=\E[H,
xterm+app|fragment with cursor keys in application mode,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
khome=\EOH,
#
# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
# and revised in patch #167 (2002/8/24). Some other terminal emulators copied
# the earlier scheme, as noted in the "use=" clauses in this file.
#
# The original assignments from patch #94 for cursor-keys had some technical
# issues:
#
# A parameter for a function-key to represent a modifier is just more
# bits. But for a cursor-key it may change the behavior of the
# application. For instance, emacs decodes the first parameter of a
# cursor-key as a repeat count.
#
# A parameterized string should (really) not begin with SS3 (\EO).
# Rather, CSI (\E[) should be used.
#
# For these reasons, the original assignments were deprecated. For
# compatibility reasons, they are still available as a setting of xterm's
# modifyCursorKeys resource. These fragments list the modified cursor-keys
# that might apply to xterm+pcfkeys with different values of that resource.
xterm+pcc3|fragment with modifyCursorKeys:3,
kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
kUP7=\E[>1;7A,
xterm+pcc2|fragment with modifyCursorKeys:2,
kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
xterm+pcc1|fragment with modifyCursorKeys:1,
kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
xterm+pcc0|fragment with modifyCursorKeys:0,
kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
#
# Here are corresponding fragments from xterm patch #216:
#
xterm+pcf0|fragment with modifyFunctionKeys:0,
kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
#
xterm+pcf2|fragment with modifyFunctionKeys:2,
kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~,
#
# Chunks from xterm #230:
xterm+pce2|fragment with modifyCursorKeys:2,
kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
use=xterm+edit,
xterm+edit|fragment for 6-key editing-keypad,
kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
use=xterm+pc+edit,
xterm+pc+edit|fragment for pc-style editing keypad,
kend=\E[4~, khome=\E[1~,
xterm+vt+edit|fragment for vt220-style editing keypad,
kfnd=\E[1~, kslt=\E[4~,
#
# Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
# Alternatively, the same scheme with old-style function keys as in xterm-r6
# is shown here (because that is used in mrxvt and mlterm):
xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
kf63=\E[13;4~, use=xterm+pcf2,
#
# This chunk is used for building the VT220/Sun/PC keyboard variants.
xterm-basic|modern xterm terminal emulator - common,
OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H,
kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
# In retrospect, something like xterm-r6 was intended here -TD
xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
# This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
xterm-16color|xterm with 16 colors like aixterm,
use=ibm+16color, use=xterm-new,
# This is a compile-time feature of XFree86 xterm beginning with
# patch #111 (1999/7/10) -TD
xterm+256color|xterm 256-color feature,
ccc,
colors#256, pairs#32767,
initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
setb@, setf@,
# This is a compile-time feature of XFree86 xterm beginning with
# patch #115 (1999/9/18) -TD
#
# Note that the escape sequences used are the same as for 256-colors - xterm
# has a different table of default color resource values. If built for
# 256-colors, it can still handle an 88-color palette by using the initc
# capability.
#
# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
# which support the xterm+256color feature support the associated initc
# capability. So it is cancelled in the entries which use this and/or the
# xterm+256color block.
#
# The default color palette for the 256- and 88-colors are different. A
# given executable will have one palette (perhaps compiled-in). If the program
# supports xterm's control sequence, it can be programmed using initc.
xterm+88color|xterm 88-color feature,
colors#88, pairs#7744, use=xterm+256color,
# These variants of XFree86 3.9.16 xterm are built as a configure option.
xterm-256color|xterm with 256 colors,
use=xterm+256color, use=xterm-new,
xterm-88color|xterm with 88 colors,
use=xterm+88color, use=xterm-256color,
# These two are used to demonstrate the any-event mouse support, i.e., by
# using an extended name "XM" which tells ncurses to put the terminal into
# a special mode when initializing the xterm mouse.
xterm-1002|testing xterm-mouse,
XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
xterm-1003|testing xterm-mouse,
XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
# This is another variant, for XFree86 4.0 xterm (T.Dickey)
# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
# To use it, your decTerminalID resource must be set to 200 or above.
#
# HTS \E H \210
# RI \E M \215
# SS3 \E O \217
# CSI \E [ \233
#
xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
civis=\233?25l, clear=\233H\2332J,
cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
flash=\233?5h$<100/>\233?5l, home=\233H,
hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
rs1=\Ec,
rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
xterm-hp|xterm with hpterm function keys,
kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
knp=\ES, kpp=\ET, use=xterm-basic,
xterm-sco|xterm with SCO function keys,
kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
use=xterm-basic,
# The xterm-new description has all of the features, but is not completely
# compatible with vt220. If you are using a Sun or PC keyboard, set the
# sunKeyboard resource to true:
# + maps the editing keypad
# + interprets control-function-key as a second array of keys, so a
# 12-fkey keyboard can support vt220's 20-fkeys.
# + maps numeric keypad "+" to ",".
# + uses DEC-style control sequences for the application keypad.
#
xterm-vt220|xterm emulating vt220,
kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
use=xterm+app, use=xterm+edit, use=xterm-basic,
use=vt220+keypad,
xterm-vt52|xterm emulating dec vt52,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
xterm-noapp|xterm with cursor keys in normal mode,
rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
use=xterm,
xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
lines#24, use=xterm-old,
# This is xterm for ncurses.
xterm|xterm terminal emulator (X Window System),
use=xterm-new,
# These entries allow access to the X titlebar and icon name as a status line.
# Note that twm (and possibly window managers descended from it such as tvtwm,
# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
# with it.
xterm+sl|access X title line and icon name,
hs,
wsl#40,
dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
xterm+sl-twm|access X title line (pacify twm-descended window managers),
hs,
wsl#40,
dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
#
# The following xterm variants don't depend on your base version
#
# xterm with bold instead of underline
xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
smso=\E[7m, smul=\E[1m, use=xterm-old,
# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
# (kterm should not invoke DEC Graphics as the alternate character set
# -- Kenji Rikitake)
# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
# -- MATSUMOTO Shoji)
# kterm implements acsc via built-in table of X Drawable's
kterm|kterm kanji terminal emulator (X window system),
eslok, hs,
ncv@,
acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
kterm-color|kterm-co|kterm with ANSI colors,
ncv@, use=kterm, use=ecma+color,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
ich@, ich1@, use=xterm,
# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
xterm1|xterm terminal emulator ignoring the alternate screen buffer,
rmcup@, smcup@, use=xterm,
# This describes the capabilities of color_xterm, an xterm variant from
# before ECMA-64 color support was folded into the main-line xterm release.
# This entry is straight from color_xterm's maintainer.
# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
# The README's with the distribution also say that it supports SGR 21, 24, 25
# and 27, but they are not present in the terminfo or termcap.
color_xterm|cx|cx100|color_xterm color terminal emulator for X,
OTbs, am, km, mir, msgr, xenl,
cols#80, it#8, lines#65, ncv@,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m,
rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
smul=\E[4m, use=ecma+color, use=vt220+keypad,
# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
# that each of those implements the home, end, delete keys differently.
#
# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
# colors; note that this is not compatible with the 5.2 version.
# csw (2002-05-15): make xterm-color primary instead of nxterm, to
# match XFree86's xterm.terminfo usage and prevent circular links
xterm-color|nxterm|generic color xterm,
ncv@,
op=\E[m, use=xterm-r6, use=klone+color,
# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
gnome-rh62|Gnome terminal,
bce,
kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
use=xterm-color,
# GNOME Terminal 1.4.0.4 (Redhat 7.2)
#
# This implements a subset of vt102 with a random selection of features from
# other terminals such as color and function-keys.
#
# shift-f1 to shift-f10 are f11 to f20
#
# NumLock changes the application keypad to approximate vt100 keypad, except
# that there is no escape sequence matching comma (,).
#
# Other defects observed:
# vt100 LNM mode is not implemented.
# vt100 80/132 column mode is not implemented.
# vt100 DECALN is not implemented.
# vt100 DECSCNM mode is not implemented, so flash does not work.
# vt100 TBC (tab reset) is not implemented.
# xterm alternate screen controls do not restore cursor position properly
# it hangs in tack after running function-keys test.
gnome-rh72|GNOME Terminal,
bce, km@,
civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
# GNOME Terminal 2.0.1 (Redhat 8.0)
#
# Documentation now claims it implements vt220 (which is demonstrably false).
# However, it does implement ECH, which is a vt220 feature. And there are
# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
# more of its bugs using vttest.
#
# However, note that bce and msgr are broken in this release. Tabs (tbc and
# hts) are broken as well. Sometimes flash (as in xterm-new) works.
#
# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
# operations. Shift-tab generates a distinct sequence so it can be argued
# that it implements kcbt.
gnome-rh80|GNOME Terminal,
bce@, msgr@,
ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
# GNOME Terminal 2.2.1 (Redhat 9.0)
#
# bce and msgr are repaired.
gnome-rh90|GNOME Terminal,
bce, msgr,
hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
use=gnome-rh80,
# GNOME Terminal 2.14.2 (Fedora Core 5)
# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
gnome-fc5|GNOME Terminal,
rs1=\Ec,
rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
# GNOME Terminal 2.18.1 (2007 snapshot)
#
# For any "recent" version of gnome-terminal, it is futile to attempt to
# support modifiers on cursor- and keypad keys because the program usually
# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
# of the keys (which more/less correspond to the termcap values), and will
# interpret those according to the $TERM value, but others not in the
# terminfo according to some constantly changing set of hacker guidelines -TD
gnome-2007|GNOME Terminal snapshot 2.18.1,
use=xterm+pcc2, use=gnome-fc5,
# GNOME Terminal 2.22.3 (2008 snapshot)
#
# In vttest, it claims to be a vt220 with national replacement character-sets,
# but aside from the identifier string, implements only a small fraction of
# vt220's behavior, which will make it less usable on a VMS system (unclear
# what the intent of the developer is, since the NRC feature exposed in vttest
# by this change does not work).
gnome-2008|GNOME Terminal snapshot 2.22.3,
use=gnome+pcfkeys, use=gnome-2007,
# GNOME terminal may automatically use the contents of the "xterm" terminfo to
# supply key information which is not built into the program. With 2.22.3,
# this list is built into the program (which addresses the inadvertant use of
# random terminfo data, though using a set of values which does not correspond
# to any that xterm produces - still not solving the problem that GNOME
# terminal hardcodes the $TERM variable as "xterm").
#
# terminfo modifier code keys
# kf13-kf24 shift 2 F1 to F12
# kf25-kf36 control 5 F1 to F12
# kf37-kf48 shift/control 6 F1 to F12
# kf49-kf60 alt 3 F1 to F12
# kf61-kf63 shift-alt 4 F1 to F3
#
# The parameters with \EO (SS3) are technically an error, since SS3 should have
# no parameters. This appears to be rote copying based on xterm+pcc0.
gnome+pcfkeys|gnome variation on xterm+pcfkeys,
kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
use=xterm+pcfkeys,
gnome|GNOME Terminal,
use=gnome-2008,
# palette is hardcoded...
gnome-256color|GNOME Terminal with xterm 256-colors,
initc@, use=xterm+256color, use=gnome,
# XFCE Terminal 0.2.5.4beta2
#
# This is based on some of the same source code, e.g., the VTE library, as
# gnome-terminal, but has fewer features, fails more screens in vttest.
# Since most of the terminfo-related behavior is due to the VTE library,
# the terminfo is the same as gnome-terminal.
xfce|Xfce Terminal,
use=gnome,
# Multi-Gnome-Terminal 1.6.2
#
# This does not use VTE, and does have different behavior (compare xfce and
# gnome).
mgt|Multi GNOME Terminal,
indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
# or not is debatable).
kvt|KDE terminal,
bce, km@,
kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
# Konsole 1.0.1
# (formerly known as kvt)
#
# This program hardcodes $TERM to 'xterm', which is not accurate. However, to
# simplify this entry (and point out why konsole isn't xterm), we base this on
# xterm-r6. The default keyboard appears to be 'linux'.
#
# Notes:
# a) konsole implements several features from XFree86 xterm, though none of
# that is documented - except of course in its source code - apparently
# because its implementors are unaccustomed to reading documentation - as
# evidenced by the sparse and poorly edited documentation distributed with
# konsole. Some features such as the 1049 private mode are recognized but
# incorrectly implemented as a duplicate of the 47 private mode.
# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
# sends PC-style escapes rather than vt100.
# c) fails vttest menu 3 (Test of character sets) because it does not properly
# parse some control sequences. Also fails vttest Primary Device Attributes
# by sending a bogus code (in the source it says it's supposed to be a
# vt220, which is doubly incorrect because it does not implement vt220
# control sequences except for a few special cases). Treat it as a
# mildly-broken vt102.
#
# Update for konsole 1.3.2:
# The 1049 private mode works (but see the other xterm screens in vttest).
# Primary Device Attributes now returns the code for a vt100 with advanced
# video option. Perhaps that's intended to be a "mildly-broken vt102".
#
# Updated for konsole 1.6.4:
# add konsole-solaris
#
# Updated for konsole 1.6.6:
# add control-key modifiers for function-keys, etc.
#
# vttest menu 1 shows that both konsole and gnome terminal do wrapping
# different from xterm (and vt100's). They have the same behavior in this
# detail, but it is unclear which copies the other.
konsole-base|KDE console window,
bce, km@, npc,
bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@,
kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
rmso=\E[27m, rmul=\E[24m,
rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
use=ecma+color, use=xterm-r6,
konsole-linux|KDE console window with linux keyboard,
kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
use=konsole-base,
konsole-solaris|KDE console window with Solaris keyboard,
kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
# than testing the code.
konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
kend=\E[4~, khome=\E[1~, use=konsole-vt100,
# The value for kbs reflects local customization rather than the settings used
# for XFree86 xterm.
konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
use=konsole-vt100,
# Konsole does not implement shifted cursor-keys.
konsole+pcfkeys|konsole subset of xterm+pcfkeys,
kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
use=xterm+pcf0,
# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
# it is still useful for deriving the other entries.
konsole-vt100|KDE console window with vt100 (sic) keyboard,
kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[H, use=konsole-base,
konsole-vt420pc|KDE console window with vt420 pc keyboard,
kbs=^H, kdch1=\177, use=konsole-vt100,
konsole-16color|klone of xterm-16color,
ncv#32, use=ibm+16color, use=konsole,
# make a default entry for konsole
konsole|KDE console window,
use=konsole-xf4x,
# palette is hardcoded...
konsole-256color|KDE console window with xterm 256-colors,
initc@, use=xterm+256color, use=konsole,
# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
#
# It is nominally a vt102 emulator, with features borrowed from rxvt and
# xterm.
#
# The function keys are numbered based on shift/control/alt modifiers, except
# that the control-modifier itself is used to spawn a new copy of mlterm (the
# "-P" option). So control/F1 to control/F12 may not be usable, depending on
# how it is configured.
#
# kf1 to kf12 \E[11~ to \E[24~
# shift kf1 to kf12 \E[11;2~ to \E[24;2~
# alt kf1 to kf12 \E[11;3~ to \E[24;3~
# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
#
mlterm|multi lingual terminal emulator,
am, eslok, km, mc5i, mir, msgr, npc, xenl,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
# The insert/delete/home/end keys do not respond to modifiers because mlterm
# looks in its termcap to decide which string to send. If it used terminfo
# (when available), it could use the extended names introduced for xterm.
mlterm+pcfkeys|fragment for PC-style fkeys,
kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
# Notes:
# rxvt 2.21b uses
# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
# but some applications don't work with that.
# It also has an AIX extension
# box2=lqkxjmwuvtn,
# and
# ech=\E[%p1%dX,
# but the latter does not work correctly.
#
# The distributed terminfo says it implements hpa and vpa, but they are not
# implemented correctly, using relative rather than absolute positioning.
#
# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
# Since rxvt is not really compatible with xterm, it should be configured as
# "rxvt" or "rxvt-color".
#
# removed dch/dch1 because they are inconsistent with bce/ech -TD
# remove km as per tack test -TD
rxvt-basic|rxvt terminal base (X Window System),
OTbs, am, bce, eo, mir, msgr, xenl, xon,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
ind=^J, is1=\E[?47l\E=\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
rmul=\E[24m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
s0ds=\E(B, s1ds=\E(0, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
use=rxvt+pcfkeys, use=vt220+keypad,
# Key Codes from rxvt reference:
#
# Note: Shift + F1-F10 generates F11-F20
#
# For the keypad, use Shift to temporarily override Application-Keypad
# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
# is off, escape sequences toggle Application-Keypad setting.
# Also note that values of Home, End, Delete may have been compiled
# differently on your system.
#
# Normal Shift Control Ctrl+Shift
# Tab ^I ESC [ Z ^I ESC [ Z
# BackSpace ^H ^? ^? ^?
# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
#
# Application
# Up ESC [ A ESC [ a ESC O a ESC O A
# Down ESC [ B ESC [ b ESC O b ESC O B
# Right ESC [ C ESC [ c ESC O c ESC O C
# Left ESC [ D ESC [ d ESC O d ESC O D
# KP_Enter ^M ESC O M
# KP_F1 ESC O P ESC O P
# KP_F2 ESC O Q ESC O Q
# KP_F3 ESC O R ESC O R
# KP_F4 ESC O S ESC O S
# XK_KP_Multiply * ESC O j
# XK_KP_Add + ESC O k
# XK_KP_Separator , ESC O l
# XK_KP_Subtract - ESC O m
# XK_KP_Decimal . ESC O n
# XK_KP_Divide / ESC O o
# XK_KP_0 0 ESC O p
# XK_KP_1 1 ESC O q
# XK_KP_2 2 ESC O r
# XK_KP_3 3 ESC O s
# XK_KP_4 4 ESC O t
# XK_KP_5 5 ESC O u
# XK_KP_6 6 ESC O v
# XK_KP_7 7 ESC O w
# XK_KP_8 8 ESC O x
# XK_KP_9 9 ESC O y
#
# The source-code for rxvt actually defines mappings for F21-F35, using
# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
# are rare, so this entry uses the shift- and control-modifiers as in
# xterm+pcfkeys to define keys past F12.
#
# kIC is normally not used, since rxvt performs a paste for that (shifted
# insert), unless private mode 35 is set.
#
# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
rxvt+pcfkeys|fragment for PC-style fkeys,
kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb,
kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@,
kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^,
kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc,
kUP=\E[a, kUP5=\EOa,
rxvt|rxvt terminal emulator (X Window System),
ncv@,
hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
rxvt-color|rxvt terminal emulator (X Window System),
use=rxvt,
rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
use=xterm+256color, use=rxvt,
rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
use=xterm+88color, use=rxvt,
rxvt-xpm|rxvt terminal emulator (X Window System),
use=rxvt,
rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
use=rxvt,
rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
use=rxvt-cygwin,
# This variant is supposed to work with rxvt 2.7.7 when compiled with
# NO_BRIGHTCOLOR defined. rxvt needs more work...
rxvt-16color|xterm with 16 colors like aixterm,
ncv#32, use=ibm+16color, use=rxvt,
# mrxvt 0.5.3
#
# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
# makes its function-keys different from other flavors of rxvt -TD
mrxvt|multitabbed rxvt,
use=xterm+pcc2, use=xterm+r6f2, use=rxvt,
# From: Michael Jennings <mej@valinux.com>
#
# Eterm 0.9.3
#
# removed kf0 which conflicts with kf10 -TD
# remove cvvis which conflicts with cnorm -TD
# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
# but does otherwise follow the rxvt+pcfkeys model -TD
# remove nonworking flash -TD
# remove km as per tack test -TD
Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
am, bce, bw, eo, mc5i, mir, msgr, xenl, xon,
btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\E[?47l\E>\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
rmso=\E[27m, rmul=\E[24m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
use=ecma+color,
Eterm-256color|Eterm with xterm 256-colors,
use=xterm+256color, use=Eterm,
Eterm-88color|Eterm with 88 colors,
use=xterm+88color, use=Eterm,
# Based on rxvt 2.4.8, it has a few differences in key bindings
aterm|AfterStep terminal,
kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
# xiterm 0.5-5.2
# This is not based on xterm's source...
# vttest shows several problems with keyboard, cursor-movements.
# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
xiterm|internationalized terminal emulator for X,
km@,
kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
# These (xtermc and xtermm) are distributed with Solaris. They refer to a
# variant of xterm which is apparently no longer supported, but are interesting
# because they illustrate SVr4 curses mouse controls - T.Dickey
xtermm|xterm terminal emulator (monocrome),
OTbs, am, km, mir, msgr, xenl,
btns#3, cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
xtermc|xterm terminal emulator (color),
colors#8, ncv#7, pairs#64,
op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
use=xtermm,
# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
# Here's a termcap entry I've been using for xterm_color, which comes
# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
# color stuff, I also have a status line defined as the window manager
# title bar. [I have translated it to terminfo -- ESR]
xterm-pcolor|xterm with color used for highlights and status line,
bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
# chars look like --esr)
hpterm|X-hpterm|hp X11 terminal emulator,
am, da, db, mir, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
rmul=\E&d@,
sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# HPUX 11 provides a color version.
hpterm-color|HP X11 terminal emulator with color,
ccc,
colors#64, pairs#8,
home=\E&a0y0C,
initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
# This entry describes an xterm with Sun-style function keys enabled
# via the X resource setting "xterm*sunFunctionKeys:true"
# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
# because we want it to be seen as <kcpy>.
# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
# with their Sun keyboard labels instead.
# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
xterm-sun|xterm with sunFunctionKeys true,
kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
use=xterm-basic,
xterms-sun|small (80x24) xterm with sunFunctionKeys true,
cols#80, lines#24, use=xterm-sun,
# This is for the extensible terminal emulator on the X11R6 contrib tape.
# It corresponds to emu's internal emulation:
# emu -term emu
# emu's default sets TERM to "xterm", but that doesn't work well -TD
# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
# fixes: add civis, cnorm, sgr -TD
emu|emu native mode,
am, bce, mir, msgr, xon,
colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\ED,
cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
setaf=\Er%i%p1%d;,
sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
# vt220 Terminfo entry for the Emu emulation, corresponds to
# emu -term vt220
# with NumLock set (to make the keypad transmit kf0-kf9).
# fixes: add am, xenl, corrected sgr0 -TD
emu-220|Emu-220 (vt200-7bit mode),
am, xenl, xon,
cols#80, it#8, lines#24, vt#200,
acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
# indicate that it emulates more than one terminal, but incompletely.
#
# This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
# It is based on vt102's entry, with some subtle differences, but also
# has status line
# supports ANSI colors (except for 'op' string)
# apparently implements alternate screen like xterm
# does not use padding, of course.
mvterm|vv100|SwitchTerm aka mvTERM,
am, eslok, hs, km, mir, msgr, xenl,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
rmul=\E[m,
rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
### MTERM
#
# This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
#
# "mterm -type ansi" sets $TERM to "ansi"
mterm-ansi|ANSI emulation,
am, bw, mir, msgr,
it#8,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
rmul=\E[24m,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
vpa=\E[%i%p1%dd,
# mterm normally sets $TERM to "mterm"
mterm|mouse-sun|Der Mouse term,
am, bw, mir,
it#8,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
rmir=^O, rmso=^T, smir=^Q, smso=^V,
# "mterm -type decansi" sets $TERM to "decansi"
#
# note: kdch1, kfnd, kslt are in the source code, but do not work -TD
decansi|ANSI emulation with DEC compatibility hacks,
am, mir, msgr, xenl,
colors#8, it#8, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
u7=\E[6n, vpa=\E[%i%p1%dd,
#### MGR
#
# MGR is a Bell Labs window system lighter-weight than X.
# These entries describe MGR's xterm-equivalent.
# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
#
mgr|Bellcore MGR (non X) window system terminal emulation,
am, km,
bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
smul=\E4n,
mgr-sun|Mgr window with Sun keyboard,
ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
mgr-linux|Mgr window with Linux keyboard,
ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
#
# Columbus UNIX virtual terminal. This terminal also appears in
# UNIX 4.0 and successors as line discipline 1 (?), but is
# undocumented and does not really work quite right.
cbunix|cb unix virtual terminal,
OTbs, am, da, db,
cols#80, lines#24, lm#0,
bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
smso=\Ea^D, smul=\Ea^A,
# (vremote: removed obsolete ":nl@:" -- esr)
vremote|virtual remote terminal,
am@,
cols#79, use=cbunix,
pty|4bsd pseudo teletype,
cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
smso=\Ea$, smul=\Ea!, use=cbunix,
# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
eterm|gnu emacs term.el terminal emulation,
am, mir, xenl,
cols#80, lines#24,
bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
smul=\E[4m,
# Entries for use by the `screen' program by Juergen Weigert,
# Michael Schroeder, Oliver Laumann. The screen and
# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
# come from University of Wisconsin and may be older.
# (screen: added <cnorm> on ANSI model -- esr)
#
# 'screen' defines extensions to termcap. Some are used in its terminal
# description:
# G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
# AX (bool) Does understand ANSI set default fg/bg color
# (\E[39m / \E[49m).
# S0 (str) Switch charset 'G0' to the specified charset.
# E0 (str) Switch charset 'G0' back to standard charset.
#
# tested with screen 3.09.08
screen|VT 100/ANSI X3.64 virtual terminal,
OTbs, OTpt, am, km, mir, msgr, xenl, G0,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
S0=\E(%p1%c, use=ecma+color,
# The bce and status-line entries are from screen 3.9.13 (and require some
# changes to .screenrc).
screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
bce, use=screen,
screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
# ======================================================================
# Entries for GNU Screen with 16 colors.
# Those variations permit to benefit from 16 colors palette, and from
# bold font and blink attribute separated from bright colors. But they
# are less portable than the generic "screen" 8 color entries: Their
# usage makes real sense only if the terminals you attach and reattach
# do all support 16 color palette.
screen-16color|GNU Screen with 16 colors,
use=ibm+16color, use=screen,
screen-16color-s|GNU Screen with 16 colors and status line,
use=ibm+16color, use=screen-s,
screen-16color-bce|GNU Screen with 16 colors and BCE,
use=ibm+16color, use=screen-bce,
screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
bce, use=ibm+16color, use=screen-s,
# ======================================================================
# Entries for GNU Screen 4.02 with --enable-colors256.
screen-256color|GNU Screen with 256 colors,
ccc@,
initc@, use=xterm+256color, use=screen,
screen-256color-s|GNU Screen with 256 colors and status line,
ccc@,
initc@, use=xterm+256color, use=screen-s,
screen-256color-bce|GNU Screen with 256 colors and BCE,
ccc@,
initc@, use=xterm+256color, use=screen-bce,
screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
bce, ccc@,
initc@, use=xterm+256color, use=screen-s,
# ======================================================================
# Read the fine manpage:
# When screen tries to figure out a terminal name for
# itself, it first looks for an entry named "screen.<term>",
# where <term> is the contents of your $TERM variable. If
# no such entry exists, screen tries "screen" (or "screen-w"
# if the terminal is wide (132 cols or more)). If even this
# entry cannot be found, "vt100" is used as a substitute.
#
# Notwithstanding the manpage, screen uses its own notion of the termcap
# and some keys from "screen.<term>" are ignored. Here is an entry which
# covers those (tested with screen 4.00.02) -TD
screen+fkeys|function-keys according to screen,
kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
khome=\E[1~, kslt@,
#
# Here are a few customized entries which are useful -TD
#
# Notes:
# (a) screen does not support invis.
# (b) screen's implementation of bw is incorrect according to tack.
# (c) screen appears to hardcode the strings for khome/kend, making it
# necessary to override the "use=" clause's values (screen+fkeys).
# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
# which is NOT the same as the terminfo screen.<term>.
# (e) when screen finds one of these customized entries, it sets $TERM to
# match. Hence, no "screen.xterm" entry is provided, since that would
# create heartburn for people running remote xterm's.
#
# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
# since the default translations override the built-in keycode
# translation. They are suppressed here to show what is tested by tack.
screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
bce@, bw,
invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
use=screen+fkeys, use=xterm-new,
# xterm-r6 does not really support khome/kend unless it is propped up by
# the translations resource.
screen.xterm-r6|screen customized for X11R6 xterm,
bw, use=screen+fkeys, use=xterm-r6,
# Color applications running in screen and TeraTerm do not play well together
# on Solaris because Sun's curses implementation gets confused.
screen.teraterm|disable ncv in teraterm,
ncv#127,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
use=screen+fkeys, use=screen,
# Other terminals
screen.rxvt|screen in rxvt,
bw,
cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
# fix the backspace key
screen.linux|screen in linux console,
bw,
kbs=\177, kcbt@, use=screen+fkeys, use=screen,
screen.mlterm|screen in mlterm,
use=screen+fkeys, use=mlterm,
screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
cols#132, use=screen,
screen2|old VT 100/ANSI X3.64 virtual terminal,
cols#80, it#8, lines#24,
cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
smso=\E[3m, smul=\E[4m, tbc=\E[3g,
# (screen3: removed unknown ":xv:LP:G0:" -- esr)
screen3|older VT 100/ANSI X3.64 virtual terminal,
km, mir, msgr,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
smul=\E[4m, tbc=\E[3g,
# Francesco Potorti <F.Potorti@cnuce.cnr.it>:
# NCSA telnet is one of the most used telnet clients for the Macintosh. It has
# been maintained until recently by the National Center for Supercomputer
# Applications, and it is feature rich, stable and free. It can be downloaded
# from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
# xterm+sl, and the docs at NCSA. It works well.
#
# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
# The terminal options should be set as follows:
# Xterm sequences ON
# use VT wrap mode ON
# use Emacs arrow keys OFF
# CTRL-COMND is Emacs meta ON
# 8 bit mode ON
# answerback string: "ncsa-vt220-8"
# setup keys: all disabled
#
# Application mode is not used.
#
# Other special mappings:
# Apple VT220
# HELP Find
# HOME Insert here
# PAGEUP Remove
# DEL Select
# END Prev Screen
# PAGEDOWN Next Screen
#
# Though it supports ANSI color, NCSA Telnet uses color to represent blinking
# text.
#
# The status-line manipulation is a mapping of the xterm-compatible control
# sequences for setting the window-title. So you must use tsl and fsl in
# pairs, since the latter ends the string that is loaded to the window-title.
ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
am, hs, km, mir, msgr, xenl,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m,
rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
u8=\E[?62;1;6c, use=ansi+enq,
ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
use=ncsa-m, use=klone+color,
ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
hs@,
dsl@, fsl@, tsl@, use=ncsa,
ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
hs@,
dsl@, fsl@, tsl@, use=ncsa-m,
# alternate -TD:
# The documented function-key mapping refers to the Apple Extended Keyboard
# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
# some keyboards and many applications require these as F1-F4.
#
ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, use=ncsa,
#### Pilot Pro Palm-Top
#
# Termcap for Top Gun Telnet and SSH on the Palm Pilot.
# http://www.ai/~iang/TGssh/
pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
OTbs, am, xenl,
cols#39, lines#16,
bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
rmso=\EB, smso=\Eb,
# From: Federico Bianchi <bianchi@www.arte.unipi.it>
# These entries are for the Embeddable Linux Kernel System (ELKS)
# project - an heavily stripped down Linux to be run on 16 bit
# boxes or, eventually, to be used in embedded systems - and have been
# adapted from the stock ELKS termcap. The project itself looks stalled,
# and the latest improvements I know of date back to March 2000.
#
# To cope with the ELKS dumb console I added an "elks-glasstty" entry;
# as an added bonus, this deals with all the capabilities common to
# both VT52 and ANSI (or, eventually, "special") modes.
elks-glasstty|ELKS glass-TTY capabilities,
OTbs, am,
cols#80, it#8, lines#25,
bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
nel=^M^J,
elks-vt52|ELKS vt52 console,
clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
home=\EH, use=elks-glasstty,
elks-ansi|ELKS ANSI console,
clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
rmso=\E[m, smso=\E[7m, use=elks-glasstty,
# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
# instead of VT52, but the "elks" entry still refers to the latter.
elks|default ELKS console,
use=elks-vt52,
# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
# one but in screen size
sibo|ELKS SIBO console,
cols#61, it#8, lines#20, use=elks-vt52,
######## COMMERCIAL WORKSTATION CONSOLES
#
#### Alpha consoles
#
# This is from the OSF/1 Release 1.0 termcap file
pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
am, xon,
cols#80, lines#25,
bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
#### Sun consoles
#
# :is1: resets scrolling region in case a previous user had used "tset vt100"
oldsun|Sun Microsystems Workstation console,
OTbs, am, km, mir, msgr,
cols#80, it#8, lines#34,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
rmso=\E[m, sgr0=\E[m, smso=\E[7m,
# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
sun-il|Sun Microsystems console with working insert-line,
am, km, msgr,
cols#80, lines#34,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z,
kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s,
sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m,
u8=\E[1t, u9=\E[11t,
# On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
# flake out on the last line. Unfortunately, without them the terminal has no
# way to scroll.
sun-cgsix|sun-ss5|Sun SparcStation 5 console,
il@, il1@, use=sun-il,
# If you are using an SS5, change the sun definition to use sun-ss5.
sun|sun1|sun2|Sun Microsystems Inc. workstation console,
use=sun-il,
# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
sun-s|Sun Microsystems Workstation window with status line,
hs,
dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
hs,
dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
sun-48|Sun 48-line window,
cols#80, lines#48, use=sun,
sun-34|Sun 34-line window,
cols#80, lines#34, use=sun,
sun-24|Sun 24-line window,
cols#80, lines#24, use=sun,
sun-17|Sun 17-line window,
cols#80, lines#17, use=sun,
sun-12|Sun 12-line window,
cols#80, lines#12, use=sun,
sun-1|Sun 1-line window for sysline,
eslok, hs,
cols#80, lines#1,
dsl=^L, fsl=\E[K, tsl=^M, use=sun,
sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
ich1@, rmir@, smir@, use=sun,
sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
lines#35,
rmcup=\E[>4h, smcup=\E[>4l, use=sun,
sun-type4|Sun Workstation console with type 4 keyboard,
kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
kcuu1=\E[215z, use=sun-il,
# Most of the current references to sun-color are from users wondering why this
# is the default on install. Details from reading the wscons manpage, adding
# cub, etc., here (rather than in the base sun-il entry) since it is not clear
# when those were added -TD
sun-color|Sun Microsystems Workstation console with color support (IA systems),
colors#8, pairs#64,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, home=\E[H, op=\E[m\E[p, setab=\E[4%p1%dm,
setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
use=sun,
#### Iris consoles
#
# (wsiris: this had extension capabilities
# :HS=\E7F2:HE=\E7F7:\
# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
# See the note on Iris extensions near the end of this file.
# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
# <flash> from BRL -- esr)
wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
OTbs, OTnc, OTpt, am,
OTkn#3, cols#80, it#8, lines#40,
OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
smul=\E7R2\E9P,
#### NeWS consoles
#
# Console terminal windows under the NeWS (Sun's Display Postscript windowing
# environment). Note: these have nothing to do with Sony's News workstation
# line.
#
# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
psterm|psterm-basic|NeWS psterm-80x34,
OTbs, am, hs, km, ul,
cols#80, it#8, lines#34,
blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
tsl=\EOl,
psterm-96x48|NeWS psterm 96x48,
cols#96, lines#48, use=psterm,
psterm-90x28|NeWS psterm 90x28,
cols#90, lines#28, use=psterm,
psterm-80x24|NeWS psterm 80x24,
cols#80, lines#24, use=psterm,
# This is a faster termcap for psterm. Warning: if you use this termcap,
# some control characters you type will do strange things to the screen.
# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
psterm-fast|NeWS psterm fast version (flaky ctrl chars),
OTbs, am, hs, km, ul,
cols#80, it#8, lines#34,
blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
smso=^Oo, smul=^Ou, tsl=^Ol,
#### NeXT consoles
#
# Use `glasstty' for the Workspace application
#
# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
next|NeXT console,
am, xt,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
nextshell|NeXT Shell application,
am,
cols#80,
bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
kcud1=^J, nel=^M^J,
#### Sony NEWS workstations
#
# (news-unk: this had :KB=news: -- esr)
news-unk|SONY NEWS vt100 emulator common entry,
OTbs, OTpt, am, xenl,
cols#80,
OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I,
if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
#
# (news-29: this had :TY=ascii: --esr)
news-29,
lines#29, use=news-unk,
# (news-29-euc: this had :TY=euc: --esr)
news-29-euc,
use=news-29,
# (news-29-sjis: this had :TY=sjis: --esr)
news-29-sjis,
use=news-29,
#
# (news-33: this had :TY=ascii: --esr)
news-33,
lines#33, use=news-unk,
# (news-33-euc: this had :TY=euc: --esr)
news-33-euc,
use=news-33,
# (news-33-sjis: this had :TY=sjis: --esr)
news-33-sjis,
use=news-33,
#
# (news-42: this had :TY=ascii: --esr)
news-42,
lines#42, use=news-unk,
# (news-42-euc: this had :TY=euc: --esr)
news-42-euc,
use=news-42,
# (news-42-sjis: this had :TY=sjis: --esr)
news-42-sjis,
use=news-42,
#
# NEWS-OS old termcap entry
#
# (news-old-unk: this had :KB=news:TY=sjis: --esr)
news-old-unk|SONY NEWS vt100 emulator common entry,
OTbs, OTpt, am, xenl,
cols#80, vt#3,
OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
#
# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
OTbs,
lines#40,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
use=news-old-unk,
#
# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
lines#42,
is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
use=news-old-unk,
#
# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
OTbs,
lines#40,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
use=news-old-unk,
#
# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
OTbs,
lines#31,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
use=news-old-unk,
#
# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
# also the alias vt100-bm.
nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
OTbs,
lines#33,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
use=news-old-unk,
#
# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
OTbs,
lines#31,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
use=news-old-unk,
#
# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
news28|sony vt100 emulator 28 lines,
OTbs,
lines#28,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
use=news-old-unk,
#
# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
news29|news28-a|sony vt100 emulator 29 lines,
lines#29,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
use=news-old-unk,
#
# (news511: this had :TY=sjis: --esr)
nwp511|nwp-511|nwp-511 vt100,
OTbs, OTpt, am, xenl,
cols#80, lines#24,
clear=\E[;H\E[2J$<20/>, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
ed=\E[J$<30/>, el=\E[K$<3/>,
flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
smso=\E[7m$<2/>, smul=\E[4m$<2/>,
# (news517: this had :TY=sjis:. --esr)
nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
eslok, hs,
cols#80, lines#30,
OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
tsl=\E[1$}\E[;%df, use=vt200,
# (news517-w: this had :TY=sjis:. --esr)
nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
eslok, hs,
cols#132, lines#50,
OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
tsl=\E[1$}\E[;%df, use=vt200,
#### Common Desktop Environment
#
# This ships with Sun's CDE in Solaris 2.5
# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
dtterm|CDE desktop terminal,
am, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, lm#0, ncv@,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
sc=\E7,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
#### Non-Unix Consoles
#
### EMX termcap.dat compatibility modes
#
# Keypad: Home=\0G Up=\0H PrPag=\0I
# ka1,kh kcuu1 kpp,ka3
#
# Left=\0K 5=\0L Right=\0M
# kcub1 kb2 kcuf1
#
# End=\0O Down=\0P NxPag=\0Q
# kc1,kend kcud1 kc3,knp
#
# Ins=\0R Del=\0S
# kich1 kdch1
#
# On keyboard with 12 function keys,
# shifted f-keys: F13-F24
# control f-keys: F25-F36
# alt f-keys: F37-F48
# The shift/control/alt keys do not modify each other, but alt overrides both,
# and control overrides shift.
#
# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
# no_color_video to inform the application that standout(1), underline(2)
# reverse(4) and invisible(64) don't work with color.
emx-base|DOS special keys,
bce, bw,
it#8, ncv#71,
bel=^G, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
use=ansi.sys,
# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
# a Unix-style environment used on OS/2. (Note that the suffix makes some
# names longer than 14 characters, the nominal maximum).
#
# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
ansi-emx|ANSI.SYS color,
am, bce, eo, mir, msgr, xon,
colors#8, cols#80, it#8, lines#25, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
u9=\E[c, use=emx-base,
# nice colors for Emacs (white on blue, mode line white on cyan)
ansi-color-2-emx|ANSI.SYS color 2,
clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
smul=\E[1;36;44m, use=ansi-emx,
# nice colors for Emacs (white on black, mode line black on cyan)
ansi-color-3-emx|ANSI.SYS color 3,
clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
smul=\E[0;36;40m, use=ansi-emx,
mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
am,
cols#80, it#8, lines#24,
clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
sgr0=\E[0m,
# Use this for cygwin32 (tested with beta 19.1)
# underline is colored bright magenta
# shifted kf1-kf12 are kf11-kf22
cygwinB19|ansi emulation for cygwin32,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
use=ansi.sys,
# Use this for cygwin (tested with version 1.1.0).
# I've combined pcansi and linux. Some values of course were different and
# I've indicated which of these were and which I used.
# Cheers, earnie_boyd@yahoo.com
# several changes based on running with tack and comparing with older entry -TD
# more changes from csw:
# add cbt [backtab]
# remove eo [erase overstrike with blank]
# change clear was \E[H\E[J now \E[2J (faster?)
# remove cols
# remove lines
# remove ncv#3 [colors collide with highlights, bitmask] not applicable
# to MSDOS box?
# add cub [cursor back param]
# add cuf [cursor forward param]
# add cuu [cursor up param]
# add cud [cursor down param]
# add hs [has status line]
# add fsl [return from status line]
# add tsl [go to status line]
# add smacs [Start alt charset] (not sure if this works)
# add rmacs [End alt charset] (ditto)
# add smcup [enter_ca_mode] (save console; thanks Corinna)
# add rmcup [exit_ca_mode] (restore console; thanks Corinna)
# add kb2 [center of keypad]
# add u8 [user string 8] \E[?6c
# add el [clear to end of line] \E[K
# Notes:
# cnorm [make cursor normal] not implemented
# flash [flash] not implemented
# blink [blink] not implemented very usefully in cygwin? \E[5m
# dim [dim] not implemented very usefully in cygwin? \E[2m
# cub1 [cursor back 1] typically \E[D, but ^H is faster?
# kNXT [shifted next key] not implemented
# kPRV [shifted prev key] not implemented
# khome [home key] really is \E[1~ NOT \E[H
# tbc [clear tab stops] not implemented
# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
# smpch [Start PC charset] is \E[11m, same as smacs
# rmpch [End PC charset] is \E[10m, same as rmacs
# mir [move in insert mode] fails in tack?
# bce [back color erase] causes problems with change background color?
# cvvis [make cursor very visible] causes a stackdump when testing with
# testcurs using the output option? \E[?25h\E[?8c
# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
# ech [erase characters param] broken \E[%p1%dX
# kcbt [back-tab key] not implemented in cygwin? \E[Z
#
# 2005/11/12 -TD
# Remove cbt since it does not work in current cygwin
# Add 'mir' and 'in' flags based on tack
cygwin|ansi emulation for Cygwin,
am, hs, mir, msgr, xon,
colors#8, it#8, pairs#64,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
vpa=\E[%i%p1%dd, use=vt102+enq,
# I've supplied this so that you can help test new values and add other
# features. Cheers, earnie_boyd@yahoo.com.
#
# Some features are from pcansi. The op value is from linux. Function-keys
# are from linux. These have been tested not to cause problems. xenl was in
# this list, but DOES cause problems so it has been removed
cygwinDBG|Debug Version for Cygwin,
am, eo, mir, msgr, xon,
colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
smul=\E[4m, tbc=\E[2g, vpa=\E[%i%p1%dd, use=vt102+enq,
# Key definitions:
# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
# encodings used by other x86 environments. All others are invented for DJGPP.
# Oddly enough, while several combinations of modifiers are tabulated, there is
# none for shifted cursor keys.
#
# F1 \E[[A
# F2 \E[[B
# F3 \E[[C
# F4 \E[[D
# F5 \E[[E
# F6 \E[17~
# F7 \E[18~
# F8 \E[19~
# F9 \E[20~
# F10 \E[21~
# F11 \E[23~
# F12 \E[24~
#
# Delete \E[3~
# Down Arrow \E[B
# End \E[4~
# Home \E[1~
# Insert \E[2~
# Left Arrow \E[D
# Page Down \E[6~
# Page Up \E[5~
# Right Arrow \E[C
# Up Arrow \E[A
#
# Shift-F1 \E[25~
# Shift-F2 \E[26~
# Shift-F3 \E[27~
# Shift-F4 \E[28~
# Shift-F5 \E[29~
# Shift-F6 \E[30~
# Shift-F7 \E[31~
# Shift-F8 \E[32~
# Shift-F9 \E[33~
# Shift-F10 \E[34~
# Shift-F11 \E[35~
# Shift-F12 \E[36~
#
# Ctrl-F1 \E[47~
# Ctrl-F2 \E[48~
# Ctrl-F3 \E[49~
# Ctrl-F4 \E[50~
# Ctrl-F5 \E[51~
# Ctrl-F6 \E[52~
# Ctrl-F7 \E[53~
# Ctrl-F8 \E[54~
# Ctrl-F9 \E[55~
# Ctrl-F10 \E[56~
# Ctrl-F11 \E[57~
# Ctrl-F12 \E[58~
#
# Ctrl-Delete \E[43~
# Ctrl-Down Arrow \E[38~
# Ctrl-End \E[44~
# Ctrl-Home \E[41~
# Ctrl-Insert \E[42~
# Ctrl-Left Arrow \E[39~
# Ctrl-Page Down \E[46~
# Ctrl-Page Up \E[45~
# Ctrl-Right Arrow \E[40~
# Ctrl-Up Arrow \E[37~
#
# Alt-F1 \E[59~
# Alt-F2 \E[60~
# Alt-F3 \E[61~
# Alt-F4 \E[62~
# Alt-F5 \E[63~
# Alt-F6 \E[64~
# Alt-F7 \E[65~
# Alt-F8 \E[66~
# Alt-F9 \E[67~
# Alt-F10 \E[68~
# Alt-F11 \E[79~
# Alt-F12 \E[80~
#
# Alt-Delete \E[65~
# Alt-Down Arrow \E[60~
# Alt-End \E[66~
# Alt-Home \E[41~
# Alt-Insert \E[64~
# Alt-Left Arrow \E[61~
# Alt-Page Down \E[68~
# Alt-Page Up \E[67~
# Alt-Right Arrow \E[62~
# Alt-Up Arrow \E[59~
#
# Also:
# Alt-A \E[82~
# Alt-B \E[82~
# Alt-C \E[83~
# Alt-D \E[84~
# Alt-E \E[85~
# Alt-F \E[86~
# Alt-G \E[87~
# Alt-H \E[88~
# Alt-I \E[89~
# Alt-J \E[90~
# Alt-K \E[91~
# Alt-L \E[92~
# Alt-M \E[93~
# Alt-N \E[94~
# Alt-O \E[95~
# Alt-P \E[96~
# Alt-Q \E[97~
# Alt-R \E[98~
# Alt-S \E[99~
# Alt-T \E[100~
# Alt-U \E[101~
# Alt-V \E[102~
# Alt-W \E[103~
# Alt-X \E[104~
# Alt-Y \E[105~
# Alt-Z \E[106~
djgpp|ansi emulation for DJGPP alpha,
am, bce, msgr, xhp, xon, xt,
colors#8, it#8, pairs#64,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
djgpp203|Entry for DJGPP 2.03,
OTbs, am,
cols#80, it#8, lines#25,
bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
kcud1=^J, nel=^M^J,
djgpp204|Entry for DJGPP 2.04,
OTbs, am, AX,
colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
# This is tested using U/Win's telnet. Scrolling is omitted because it is
# buggy. Another odd bug appears when displaying "~" in alternate character
# set (the emulator spits out error messages). Compare with att6386 -TD
uwin|U/Win 3.2 console,
am, eo, in, msgr, xenl, xon,
colors#8, it#8, ncv#58, pairs#64,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
# This entry fits the Windows NT console when the _POSIX_TERM environment
# variable is set to 'on'. While the Windows NT POSIX console is seldom used,
# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
# systems is not, and (surprise!) they match very well.
#
# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
# are the installation instructions a pile of mind-numbing bureaucratese,
# but the termcap entry is actually broken and unusable as given; the :do:
# capability is misspelled "d".
#
# To use this, you need to a bunch of environment variables:
#
# SET _POSIX_TERM=on
# SET TERM=ansi
# SET TERMCAP=location of termcap file in POSIX file format
# which is case-sensitive.
# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
# SET TMP=//C/TEMP
#
# Important note: setting the TMP environment variable in POSIX style renders
# it incompatible with a lot of other applications, including Visual C++. So
# you should have a separate command window just for vi. All the other
# variables may be permanently set in the Control Panel\System applet.
#
# You can find out more about the restrictions of this facility at
# <http://www.nentug.org/unix-to-nt/ntposix.htm>.
#
# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
am, bw, msgr,
cols#80, it#8, lines#25,
bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
# From: jew@venus.sunquest.com
# Date: 19 Feb 93 23:41:07 GMT
# Here's a combination of ansi and vt100 termcap
# entries that works nearly perfectly for me
# (Gateway 2000 Handbook and Microsoft Works 3.0):
pcmw|PC running Microsoft Works,
am, xenl,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
tbc=\E[3g$<2/>,
# From: Federico Bianchi
# This is the entry for the OpenNT terminal.
# The ntconsole name is for backward compatability.
# This is for OpenNT 2.0 and later.
# Later OpenNT was renamed to Interix.
#
# Presently it is distributed by Microsoft as Services For Unix (SFU).
# The 3.5 beta contains ncurses 4.2 (that is header files and executables,
# the documentation dates from 1.9.9e) -TD
interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
am, bw, msgr,
colors#8, cols#80, lines#25, ncv#3, pairs#64,
acsc=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\,\021+^P0\333p\304r\304y\363z\362{\343|\330}\234,
bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[1m, smul=\E[4m,
opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
lines#35, use=opennt,
opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
lines#50, use=opennt,
opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
lines#60, use=opennt,
opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
lines#100, use=opennt,
# OpenNT wide terminals
opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
cols#125, use=opennt,
opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
lines#35, use=opennt-w,
opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
lines#50, use=opennt-w,
opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
lines#60, use=opennt-w,
opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
cols#132, use=opennt,
# OpenNT terminals with no smcup/rmcup (names match termcap entries)
interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
rmcup@, smcup@, use=opennt,
opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
lines#35, use=opennt-nti,
opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
lines#50, use=opennt-nti,
opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
lines#60, use=opennt-nti,
opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
lines#100, use=opennt-nti,
######## COMMON TERMINAL TYPES
#
# This section describes terminal classes and maker brands that are still
# quite common, but have proprietary command sets not blessed by ANSI.
#
#### Altos
#
# Altos made a moderately successful line of UNIX boxes. In 1990 they were
# bought out by Acer, a major Taiwanese manufacturer of PC-clones.
# Acer has a web site at http://www.acer.com.
#
# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
# His comments suggest they were shipped with the system.
#
# (altos2: had extension capabilities
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
# :HL=^AP\r:SP=\E[i:\
# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
# Comparison with the k* capabilities makes it obvious that the c* things are
# shift keys. I have renamed them to keys 32 and up accordingly. Also,
# :sr: was given as a boolean-- esr)
altos2|alt2|altos-2|altos II,
cols#80, it#8, lines#24, xmc#0,
clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smam=\E[?7h, smso=\E[7m, smul=\E[4m,
# (altos3: had extension capabilities
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
# :HL=^AP\r:SP=\E[i:\
# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
altos4|alt4|altos-4|altos IV,
use=wy50,
# (altos7: had extension capabilities:
# :GG#0:GI=\EH8:GF=\EH7:\
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# Comparison with the k* capabilities makes it obvious that the c* things are
# shift keys. I have renamed them to keys 32 and up accordingly. I have
# also made this entry relative to adm12 in order to give it an <sgr>. The
# <invis> imported by use=adm+sgr may work, let me know. -- esr)
altos7|alt7|altos VII,
am, mir,
cols#80, lines#24, xmc#0,
acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
ind=^J, invis=\EG1,
is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
rmir=\Er, smir=\Eq, use=adm+sgr,
altos7pc|alt7pc|altos PC VII,
kend=\ET, use=altos7,
#### Hewlett-Packard (hp)
#
# Hewlett-Packard
# 8000 Foothills Blvd
# Roseville, CA 95747
# Vox: 1-(916)-785-4363 (Technical response line for VDTs)
# 1-(800)-633-3600 (General customer support)
#
#
# As of March 1998, HP no longer has any terminals in production.
# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
# supported (they still have parts). So are the 2392a and 2394a.
# See the WORKSTATION CONSOLES section for the 700s.
#
# Generic HP terminal - this should (hopefully) work on any HP terminal.
hpgeneric|hp|hewlett-packard generic terminal,
OTbs, OTpt, am, da, db, mir, xhp,
cols#80, lines#24, lm#0, vt#6,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
vpa=\E&a%p1%dY,
hp110|hewlett-packard model 110 portable,
lines#16, use=hpgeneric,
hp+pfk+cr|hp function keys with CR,
kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
hp+pfk-cr|hp function keys w/o CR,
kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
kf8=\Ew,
# The hp2621s use the same keys for the arrows and function keys,
# but not separate escape sequences. These definitions allow the
# user to use those keys as arrow keys rather than as function
# keys.
hp+pfk+arrows|hp alternate arrow definitions,
kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
kll=\Eq\r, kri=\Es\r,
hp+arrows|hp arrow definitions,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
kind=\ES, kll=\EF, kri=\ET,
# Generic stuff from the HP 262x series
#
hp262x|HP 262x terminals,
xhp,
blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
# Note: no <home> on HPs since that homes to top of memory, not screen.
# Due to severe 2621 braindamage, the only way to get the arrow keys to
# transmit anything at all is to turn on the function key labels
# with <smkx>, and even then the user has to hold down shift!
# The default 2621 turns off the labels except when it has to to
# enable the function keys. If your installation prefers labels
# on all the time, or off all the time (at the "expense" of the
# function keys), use 2621-nl or 2621-wl.
#
# Note: there are newer ROMs for 2621's that allow you to set
# strap A so the regular arrow keys xmit \EA, etc, as with the
# 2645. However, even with this strap set, the terminal stops
# xmitting if you reset it, until you unset and reset the strap!
# Since there is no way to set/unset the strap with an escape
# sequence, we don't use it in the default.
# If you like, you can use 2621-ba (brain-damaged arrow keys).
hp2621-ba|2621 w/new rom and strap A set,
rmkx@, smkx@, use=hp+arrows, use=hp2621,
# hp2621 with function labels. Most of the time they are off,
# but inside vi, the function key labels appear. You have to
# hold down shift to get them to xmit.
hp2621|hp2621a|2621|2621a|hp2621-wl|2621-wl|hp 2621 w/labels,
is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
hp2621-fl|hp 2621,
xhp@, xon,
pb#19200,
cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
use=hp+pfk+cr, use=hpgeneric,
# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
hp2621p|hp 2621 with printer,
mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
hp2621p-a|hp2621p with fn as arrows,
use=hp+pfk+arrows, use=hp2621p,
# hp2621 with k45 keyboard
hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
# 2621 using all 48 lines of memory, only 24 visible at any time.
hp2621-48|48 line 2621,
lines#48,
cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
use=hp2621,
# 2621 with no labels ever. Also prevents vi delays on escape.
hp2621-nl|hp 2621 with no labels,
kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
use=hp2621-fl,
# Needed for UCB ARPAVAX console, since lsi-11 expands tabs
# (wrong).
#
hp2621-nt|hp 2621 w/no tabs,
ht@, use=hp2621,
# Hp 2624 B with 4 or 10 pages of memory.
#
# Some assumptions are made with this entry. These settings are
# NOT set up by the initialization strings.
#
# Port Configuration
# RecvPace=Xon/Xoff
# XmitPace=Xon/Xoff
# StripNulDel=Yes
#
# Terminal Configuration
# InhHndShk=Yes
# InhDC2=Yes
# XmitFnctn(A)=No
# InhEolWrp=No
#
# Note: the 2624 DOES have a true <home>, believe it or not!
#
# The 2624 has an "error line" to which messages can be sent.
# This is CLOSE to what is expected for a "status line". However,
# after a message is sent to the "error line", the next carriage
# return is EATEN and the "error line" is turned back off again!
# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
#
# This entry supports emacs (and any other program that uses raw
# mode) at 4800 baud and less. I couldn't get the padding right
# for 9600.
#
# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
da, db,
lm#96,
flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
use=hp+labels, use=scrhp,
# This hp2626 entry does not use any of the fancy windowing stuff
# of the 2626.
#
# Indeed, terminfo does not yet handle such stuff. Since changing
# any window clears memory, it is probably not possible to use
# this for screen opt.
#
# ed is incredibly slow most of the time - I am guessing at the
# exact padding. Since the terminal uses xoff/xon this is intended
# only for cost computation, so that the terminal will prefer el
# or even dl1 which is probably faster!
#
# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
# extra slow on the last line of the window.
#
# The padding probably should be changed.
#
hp2626|hp2626a|hp2626p|hp 2626,
da, db,
lm#0, pb#19200,
ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
use=hp+labels, use=scrhp,
# This entry is for sysline. It allocates a 23 line window with
# a 115 line workspace for regular use, and a 1 line window for
# the status line.
#
# This assumes port 2 is being used.
# Turn off horizontal line, Create ws #1 with 115 lines,
# Create ws #2 with 1 line, Create window #1 lines 1-23,
# Create window #2 lines 24-24, Attach cursor to workspace #1.
# Note that this clears the tabs so it must be done by tset before
# it sets the tabs.
#
hp2626-s|hp 2626 using only 23 lines,
eslok, hs,
lines#23,
fsl=\E&d@\E&w7f2p1I\E&w4f1I,
is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
# Force terminal back to 24 lines after being 23.
hp2626-ns|hp 2626 using all 24 lines,
is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
use=hp2626,
# Various entries useful for small windows on 2626.
hp2626-12|hewlett-packard 2626 12 lines,
lines#12, use=hp2626,
hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
cols#40, lines#12, use=hp2626,
hp2626-x40|hewlett-packard 2626 40 columns,
cols#40, use=hp2626,
hp2626-12-s|hewlett-packard 2626 11 lines plus status,
lines#11, use=hp2626-s,
#
# hp2627 color tubes from University of Wisconsin
#
hp2627a-rev|hp 2627 with reverse video colors,
cr=^M, cud1=^J, ht=^I, ind=^J,
is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
smul=\E&dD\E&v1S, use=hp2621-nl,
hp2627a|hp 2627 color terminal with no labels,
cr=^M, cud1=^J, ht=^I, ind=^J,
is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
use=hp2621-nl,
hp2627c|hp 2627 color (cyan) terminal with no labels,
cr=^M, cud1=^J, ht=^I, ind=^J,
is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
# hp2640a doesn't have the Y cursor addressing feature, and C is
# memory relative instead of screen relative, as we need.
#
hp2640a|hp 2640a,
cup@, rmkx@, smkx@, use=hp2645,
hp2640b|hp2644a|hp 264x series,
rmkx@, smkx@, use=hp2645,
# (hp2641a: removed unknown :gu: -- esr)
hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
am, da, db, mir, xhp,
cols#80, lines#24,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
if=/usr/share/tabset/std, il1=\EL, ind=^J,
is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
vpa=\E&a%p1%2dY,
# This terminal should be used at 4800 baud or less. It needs padding for
# plain characters at 9600, I guessed at an appropriate cr delay. It really
# wants ^E/^F handshaking, but that doesn't work well even if you write
# software to support it.
hp2645|hp45|HP 2645 series,
pb#9600,
blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
rmkx=\E&s0A,
sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
# You should use this terminal at 4800 baud or less.
hp2648|hp2648a|HP 2648a graphics terminal,
clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
dch1=\EP$<7>, ip=$<5>, use=hp2645,
# The HP 150 terminal is a fairly vanilla HP terminal, with the
# clreol standout problem. It also has graphics capabilities and
# a touch screen, which we don't describe here.
hp150|hewlett packard Model 150,
OTbs, use=hp2622,
# HP 2382a terminals, "the little ones." They don't have any
# alternate character set support and sending out ^N/^O will
# leave the screen blank.
hp2382a|hp2382|hewlett packard 2382a,
da, db,
lh#1, lm#48,
acsc@,
pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
rmacs@,
sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
hp2621-a|hp2621a-a|hp2621 with fn as arrows,
use=hp+pfk+arrows, use=hp2621-fl,
# newer hewlett packard terminals
newhpkeyboard|generic entry for HP extended keyboard,
kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
use=hp+pfk-cr,
newhp|generic entry for new hewlett packard terminals,
am, bw, mir, xhp, xon,
cols#80, lines#24, pb#4800,
acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
tbc=\E3, use=newhpkeyboard,
memhp|memory relative addressing for new HP ttys,
vt#6,
clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
scrhp|screen relative addressing for new HP ttys,
clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
# (hp+labels: added label values from a BRL termcap -- esr)
hp+labels|"standard" label info for new HP ttys,
lh#2, lw#8, nlab#8,
lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
rmln=\E&j@, smln=\E&jB,
hp+printer|"standard" printer info for HP ttys,
ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
# The new hp2621b is kind of a cross between the old 2621 and the
# new 262x series of machines. It has dip-switched options.
# The firmware has a bug in it such that if you give it a null
# length label, the following character is eaten!
hp2621b|hp 2621b with old style keyboard,
lh#1, lm#48, lw#8, nlab#8,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
kind=\ET, kll=\EF, kri=\ES,
pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
smln=\E&jB, use=hp2621,
hp2621b-p|hp 2621b with printer,
use=hp+printer, use=hp2621b,
# hp2621b - new 2621b with new extended keyboard
# these are closer to the new 26xx series than the other 2621b
hp2621b-kx|hp 2621b with extended keyboard,
use=newhpkeyboard, use=hp2621b,
hp2621b-kx-p|hp 2621b with new keyboard & printer,
use=hp+printer, use=hp2621b-kx,
# Some assumptions are made in the following entries.
# These settings are NOT set up by the initialization strings.
#
# Port Configuration
# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
#
# Terminal Configuration
# InhHndShk(G)=Yes InhDC2(H)=Yes
# XmitFnctn(A)=No InhEolWrp=No
#
#
# Hp 2622a & hp2623a display and graphics terminals
#
hp2622|hp2622a|hp 2622,
da, db,
lm#0, pb#19200,
is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
# The 2623 is a 2622 with extra graphics hardware.
hp2623|hp2623a|hp 2623,
use=hp2622,
hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
use=hp+printer, use=hp2624,
# The hewlett packard B can have an optional extra 6 pages of memory.
hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
lm#240, use=hp2624,
hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
lm#240, use=hp2624b-p,
# Color manipulations for HP terminals
hp+color|hp with colors,
ccc,
colors#16, ncv#17, pairs#7,
initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
op=\E&v0S, scp=\E&v%p1%dS,
# <is2> sets the screen to be 80 columns wide
hp2397a|hp2397|hewlett packard 2397A color terminal,
is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
# HP 700/44 Setup parameters:
# Terminal Mode HP-PCterm
# Inhibit Auto Wrap NO
# Status Line Host Writable
# PC Character Set YES
# Twenty-Five Line Mode YES
# XON/XOFF @128 or 64 (sc)
# Keycode Mode NO or YES (sc)
# Backspace Key BS or BS/DEL
#
# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
# \E\\? does not turn off keycode mode
# <smsc> sets alternate start/stop; keycode on
hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
am, eo, xenl, xon,
cols#80, lines#25,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
ind=^J,
is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
kpp=\E[5~, rmam=\E[?7l,
rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
smul=\E[4m, xoffc=g, xonc=e,
#
# (hp2392: copied <rmir> here from hpex -- esr)
hp2392|239x series,
cols#80,
cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
use=hpsub,
hpsub|hp terminals -- capability subset,
am, da, db, mir, xhp, xon,
lines#24,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
# hpex:
# May be used for most 24 x 80 hp terminals,
# but has no padding added, so may allow runover in some terminals at high
# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
# hp98x5 terminal emulators or hp98x6 consoles.
# Adds xy-cursor addressing, vertical cursor addressing, home,
# last line, and underline capabilities.
#
# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
# moved <rmir> here from hpsub -- esr)
hpex|hp extended capabilites,
cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
hp2|hpex2|hewlett-packard extended capabilities newer version,
am, da, db, mir, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# HP 236 console
# From: <ddavis@ic.berkeley.edu>
hp236|hp236 internal terminal emulator,
OTbs, am,
cols#80, lines#24,
clear=\EF, cnorm=\EDE, cub1=^H,
cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
sgr0=\ECI, smso=\EBI,
# This works on a hp300 console running Utah 4.3 BSD
# From: Craig Leres <leres@okeeffe.berkeley.edu>
hp300h|HP Catseye console,
OTbs, am, da, db, mir, xhp,
cols#128, lines#51, lm#0, xmc#0,
bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
vpa=\E&a%p1%dY,
# From: Greg Couch <gregc@ernie.berkeley.edu>
hp9837|hp98720|hp98721|HP 9000/300 workstations,
OTbs, am, da, db, mir, xhp,
cols#128, it#8, lines#46, lm#0,
bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
tbc=\E3, vpa=\E&a%p1%dY,
# HP 9845 desktop computer from BRL
# (hp9845: removed unknown capability :gu: -- esr)
hp9845|HP 9845,
OTbs, am, da, db, eo, mir, xhp,
cols#80, lines#21,
OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY,
cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@,
smir=\EQ, smso=\E&dB,
# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
hp98550|hp98550a|HP 9000 Series 300 color console,
OTbs, am, da, db, mir, xhp,
cols#128, it#8, lines#49, lm#0,
acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# From: Victor Duchovni <vic@fine.princeton.edu>
# (hp700-wy: removed obsolete ":nl=^J:";
# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
hp700-wy|HP700/41 emulating wyse30,
OTbs, am, bw, mir, msgr,
cols#80, it#8, lines#24, xmc#1,
cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
hp70092|hp70092a|HP 700/92,
am, da, db, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
bobcat|sbobcat|HP 9000 model 300 console,
am, da, db, mir, xhp,
cols#128, it#8, lines#47, xmc#0,
cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
gator-t|HP 9000 model 237 emulating extra-tall AAA,
lines#94, use=gator,
gator|HP 9000 model 237 emulating AAA,
bw, km, mir, ul,
cols#128, it#8, lines#47,
bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
gator-52|HP 9000 model 237 emulating VT52,
cols#128, lines#47, use=vt52,
gator-52t|HP 9000 model 237 emulating extra-tall VT52,
lines#94, use=gator-52,
#### Honeywell-Bull
#
# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
#
# Honeywell Bull terminal. Its cursor and function keys send single
# control characters and it has standout/underline glitch. Most programs
# do not like these features/bugs. Visual bell is realized by flashing the
# "keyboard locked" LED.
dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
cols#80, lines#25,
clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
dku7003|Honeywell Bull DKU 7003 all features described,
msgr,
xmc#1,
blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
use=dku7003-dumb,
#### Lear-Siegler (adm)
#
# These guys are long since out of the terminals business, but
# in 1995 many current terminals still have an adm type as one of their
# emulations (usually their stupidest, and usually labeled adm3, though
# these `adm3' emulations normally have adm3a+ capabilities).
#
# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
# was being held to ground would trigger a send of the top line on the screen.
# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
# for clearing up this point.)
adm1a|adm1|lsi adm1a,
am,
cols#80, lines#24,
bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
ind=^J,
adm2|lsi adm2,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
# (adm3: removed obsolete ":ma=^K^P:" -- esr)
adm3|lsi adm3,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
# The following ADM-3A switch settings are assumed for normal operation:
# SPACE U/L_DISP CLR_SCRN 24_LINE
# CUR_CTL LC_EN AUTO_NL FDX
# Other switches may be set for operator convenience or communication
# requirements. I recommend
# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
# ETX_OFF EOT_OFF
# Most of these terminals required an option ROM to support lower case display.
# Open the case and look at the motherboard; if you see an open 24-pin DIP
# socket, you may be out of luck.
#
# (adm3a: some capabilities merged in from BRl entry -- esr)
adm3a|lsi adm3a,
OTbs, am,
cols#80, lines#24,
OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, rs2=^N,
adm3a+|adm3a plus,
kbs=^H, use=adm3a,
# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
adm5|lsi adm5,
xmc#1,
bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
rmso=\EG, smso=\EG, use=adm3a+,
# A lot of terminals other than adm11s use these. Wherever you see
# use=adm+sgr with some of its capabilities disabled, try the
# disabled ones. They may well work but not have been documented or
# expressed in the using entry. We'd like to cook up an <sgr> but the
# <rmacs>/<smacs> sequences of the using entries vary too much.
adm+sgr|adm style highlight capabilities,
invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
smso=\EG4, smul=\EG8,
# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
# be ^Z, according to his entry.
# (adm11: <smul>=\EG4 was obviously erroneous because it also said
# <rev>=\EG4. Looking at other ADMs confirms this -- esr)
adm11|LSI ADM-11,
OTbs, am, hs,
OTkn#8, cols#80, lines#24,
OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
use=adm+sgr,
# From: Andrew Scott Beals <bandy@lll-crg.ARPA>
# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
# via BRL. That entry asserted <xmc#1>, but I've left that out because
# neither earlier nor later ADMSs have it -- esr)
#
# You will need to get into the supervisor setup before you can set
# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
# see a lot more setup options.
#
# While in supervisor setup you can also use following codes:
#
# Ctrl-P Personality character selections (configure for example what
# arrow keys send, if I recall correctly)
# Ctrl-T tabs 1-80 use left&right to move and up to set and
# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
# Ctrl-B Binary setup (probably not needed. I think that everything can
# be set using normal setup)
# Ctrl-A Answerback mode (enter answerback message)
# Ctrl-U User friendly mode (normal setup)
# Ctrl-D Defaults entire setup and function keys from EPROM tables
# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
# Ctrl-R Reads both setup and functions keys from NVM.
# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
#
# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
# RTS/CTS used nowadays with virtually every modem and computer. 19200
# bps works fine with hardware flow control.
#
# The following null-modem cable should fix this and enable you to use
# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
# set ADM-12+ for DTR handshaking from supervisor setup.
#
# PC Serial ADM-12+
# -------- -------
# 2 - 3
# 3 - 2
# 4 - 5
# 5 - 20
# 6,8 - 4
# 7 - 7
# 20 - 6,8
#
adm12|lsi adm12,
OTbs, OTpt, am, mir,
OTug#1, cols#80, it#8, lines#24,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
use=adm+sgr,
# (adm20: removed obsolete ":kn#7:" -- esr)
adm20|lear siegler adm20,
OTbs, am,
cols#80, it#8, lines#24,
bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
sgr0=\E(, smso=\E),
adm21|lear siegler adm21,
xmc#1,
bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
use=adm3a,
# (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
# removed bogus-looking \200 from before <cup>. -- esr)
adm22|lsi adm22,
OTbs, am,
cols#80, lines#24,
bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
# ADM 31 DIP Switches
#
# This information comes from two versions of the manual for the
# Lear-Siegler ADM 31.
#
# Main board:
# rear of case
# +-||||-------------------------------------+
# + S1S2 ||S +
# + ||3 +
# + +
# + ||S +
# + ||4 +
# + +
# + +
# + +
# + +
# + +
# +-+ +-+
# + +
# + S5 S6 S7 +
# + == == == +
# +----------------------------------------------+
# front of case (keyboard)
#
# S1 - Data Rate - Modem
# S2 - Data Rate - Printer
# ------------------------
# Data Rate Setting
# -------------------
# 50 0 0 0 0
# 75 1 0 0 0
# 110 0 1 0 0
# 134.5 1 1 0 0
# 150 0 0 1 0
# 300 1 0 1 0
# 600 0 1 1 0
# 1200 1 1 1 0
# 1800 0 0 0 1
# 2000 1 0 0 1
# 2400 0 1 0 1
# 3600 1 1 0 1
# 4800 0 0 1 1
# 7200 1 0 1 1
# 9600 0 1 1 1
# x 1 1 1 1
#
# S3 - Interface/Printer/Attributes
# ---------------------------------
# Printer Busy Control
# sw1 sw2 sw3
# ---------------
# off off off Busy not active, CD disabled
# off off on Busy not active, CD enabled
# off on off Busy active on J5-20, CD disabled
# on off off Busy active on J5-19, CD disabled - Factory Set.
# on off on Busy active on J5-19, CD enabled
#
# sw4 Used in conjuction with S4 for comm interface control - Fact 0
#
# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
#
# sw6 ON enables printer BUSY active LOW - Factory Setting
# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
#
# sw7 ON - steady cursor - Factory Setting
# OFF - blinking cursor
#
# sw8 ON causes selected attribute character to be displayed
# OFF causes SPACE to be displayed instead - Factory Setting
#
# S4 - Interface
# --------------
# Modem Interface
# S3 S4 S4 S4 S4
# sw4 sw1 sw2 sw3 sw4
# ---------------------------
# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
# Current Loop disabled - Factory Setting
# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
# disabled
# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
# Current Loop Disabled
#
# sw5 ON disables dot stretching mode - Factory Setting
# OFF enables dot stretching mode
# sw6 ON enables blanking function
# OFF enables underline function - Factory Setting
# sw7 ON causes NULLS to be displayed as NULLS
# OFF causes NULLS to be displayed as SPACES - Factory Setting
#
# S5 - Word Structure
# -------------------
# sw1 ON enables BREAK key - Factory Setting
# OFF disables BREAK key
# sw2 ON selects 50Hz monitor refresh rate
# OFF selects 60Hz monitor refresh rate - Factory Setting
#
# Modem Port Selection
# sw3 sw4 sw5
# ---------------
# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
#
# sw6 ON sends bit 8 a 1 (mark)
# OFF sends bit 8 as 0 (space) - Factory Setting
# sw7 ON selects Block Mode
# OFF selects Conversation Mode - Factory Setting
# sw8 ON selects Full Duplex operation
# OFF selects Half Duplex operation - Factory Setting
#
# S6 - Printer
# ------------
# sw1, sw2, sw6, sw7 Reserved - Factory 0
#
# Printer Port Selection
# same as Modem above, bit 8 (when 8 DATA bits) is always = 0
#
# sw8 ON enables Printer Port
# OFF disables Printer Port - Factory Setting
#
# S7 - Polling Address
# --------------------
# sw1-7 Establish ASCII character which designates terminal polling address
# ON = logic 0
# OFF = logic 1 - Factory Setting
# sw8 ON enables Polling Option
# OFF disables Polling Option - Factory Setting
#
#
# On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
#
# This adm31 entry uses underline as the standout mode.
# If the adm31 gives you trouble with standout mode, check the DIP switch in
# position 6, bank @c11, 25% from back end of the circuit board. Should be
# OFF. If there is no such switch, you have an old adm31 and must use oadm31.
# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
adm31|lsi adm31 with sw6 set for underline mode,
OTbs, am, mir,
cols#80, lines#24,
bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
adm31-old|o31|old adm31,
rmul@, smso=\EG4, smul@, use=adm31,
# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
adm36|LSI ADM36,
OTbs, OTpt,
OTkn#4,
if=/usr/share/tabset/vt100,
is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
use=vt100,
# (adm42: removed obsolete ":ma=^K^P:" -- esr)
adm42|lsi adm42,
OTbs, am,
cols#80, lines#24,
bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
smir=\Eq, smul@, use=adm+sgr,
# The following termcap for the Lear Siegler ADM-42 leaves the
# "system line" at the bottom of the screen blank (for those who
# find it distracting otherwise)
adm42-ns|lsi adm-42 with no system line,
cbt=\EI\EF \011, clear=\E;\EF \011,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
smir=\Eq\EF \011, use=adm42,
# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
# The insert mode of this terminal is commented out because it's broken for our
# purposes in that it will shift the position of every character on the page,
# not just the cursor line!
# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
adm1178|1178|lsi adm1178,
am,
cols#80, lines#24, xmc#1,
bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
sgr0=\E), smso=\EG4, smul=\EG1,
#### Prime
#
# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
# Prime merged with ComputerVision in the late 1980s; you can reach them at:
#
# ComputerVision Services
# 500 Old Connecticut Path
# Framingham, Mass.
#
# Standout mode is dim reverse-video.
pt100|pt200|wren|fenix|prime pt100/pt200,
am, bw, mir, msgr,
cols#80, it#8, lines#24,
cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
sgr0=\E[m,
smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
cols#132,
cup=\E[%i%p1%d;%p2%dH, use=pt100,
pt250|Prime PT250,
rmso@, smso@, use=pt100,
pt250w|Prime PT250 in 132-column mode,
rmso@, smso@, use=pt100w,
#### Qume (qvt)
#
# Qume, Inc.
# 3475-A North 1st Street
# San Jose CA 95134
# Vox: (800)-457-4447
# Fax: (408)-473-1510
# Net: josed@techsupp.wyse.com (Jose D'Oliveira)
#
# Qume was bought by Wyse, but still (as of early 1995) has its own support
# group and production division.
#
# Discontinued Qume models:
#
# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
# built to replace them, and a qvt119+ which was a 101+ with available wide
# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
# and an ANSI-compatible qvt203 that replaced it. Qume started producing
# ANSI-compatible terminals with the qvt323 and qvt61.
#
# Current Qume models (as of February 1995):
#
# All current Qume terminals have ANSI-compatible operation modes.
# Qume is still producing the qvt62, which features emulations for other
# popular lines such as ADDS, and dual-host capabilities. The qvt82 is
# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
# with many emulations including Wyse370, Wyse 325, etc. Their newest
# model is the qvt520, which is vt420-compatible.
#
# There are some ancient printing Qume terminals under `Daisy Wheel Printers'
#
# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
# setup mode. Shift-s should be a configuration save to NVRAM.
qvt101|qvt108|qume qvt 101 and QVT 108,
xmc#1, use=qvt101+,
# This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
# file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
# What seems to be going on here is that this entry was designed so that
# the normal highlight is bold and standout is dim plus something else
# (reverse-video maybe? But then, are there two <rev> sequences?)
qvt101+|qvt101p|qume qvt 101 PLUS product,
am, bw, hs, ul,
cols#80, lines#24, xmc#0,
bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
qvt102|qume qvt 102,
cnorm=\E., use=qvt101,
# (qvt103: added <rmam>/<smam> based on init string -- esr)
qvt103|qume qvt 103,
am, xenl, xon,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
qvt103-w|qume qvt103 132 cols,
cols#132, lines#24,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
am, hs, mir, msgr,
cols#80, lines#24, xmc#0,
bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
lines#25, use=qvt119+,
qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
cols#132,
is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
lines#25, use=qvt119+,
qvt203|qvt203+|qume qvt 203 Plus,
dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
cols#132, lines#24,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
#
# Since a command is present for enabling 25 data lines,
# a specific terminfo entry may be generated for the 203.
# If one is desired for the QVT 119 PLUS then 25 lines must
# be selected in the status line (setup line 9).
#
qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
cols#80, lines#25,
is2=\E[=40h\E[?3l, use=qvt203,
qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
cols#132, lines#25,
rs2=\E[?3h\E[=40h, use=qvt203,
#### Televideo (tvi)
#
# TeleVideo
# 550 East Brokaw Road
# PO Box 49048 95161
# San Jose CA 95112
# Vox: (408)-954-8333
# Fax: (408)-954-0623
#
#
# These require incredible amounts of padding.
#
# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
# Televideo terminals are ANSI and PC-ANSI compatible.
tvi803|televideo 803,
clear=\E*$<10>, use=tvi950,
# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
# Switch settings are:
#
# S1 1 2 3 4
# D D D D 9600
# D D D U 50
# D D U D 75
# D D U U 110
# D U D D 135
# D U D U 150
# D U U D 300
# D U U U 600
# U D D D 1200
# U D D U 1800
# U D U D 2400
# U D U U 3600
# U U D D 4800
# U U D U 7200
# U U U D 9600
# U U U U 19200
#
# S1 5 6 7 8
# U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
# U D X U 7N2
# U U D D 7O1
# U U D U 7O2
# U U U D 7E1
# U U U U 7E2
# D D X D 8N1
# D D X U 8N2
# D U D D 8O1
# D U U U 8E2
#
# S1 9 Autowrap
# U on
# D off
#
# S1 10 CR/LF
# U do CR/LF when CR received
# D do CR when CR received
#
# S2 1 Mode
# U block
# D conversational
#
# S2 2 Duplex
# U half
# D full
#
# S2 3 Hertz
# U 50
# D 60
#
# S2 4 Edit mode
# U local
# D duplex
#
# S2 5 Cursor type
# U underline
# D block
#
# S2 6 Cursor down key
# U send ^J
# D send ^V
#
# S2 7 Screen colour
# U green on black
# D black on green
#
# S2 8 DSR status (pin 6)
# U disconnected
# D connected
#
# S2 9 DCD status (pin 8)
# U disconnected
# D duplex
#
# S2 10 DTR status (pin 20)
# U disconnected
# D duplex
# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
tvi910|televideo model 910,
OTbs, am, msgr,
cols#80, it#8, lines#24, xmc#1,
bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
vpa=\E[%p1%{32}%+%c, use=adm+sgr,
# From: Alan R. Rogers <rogers%albany@csnet-relay>
# as subsequently hacked over by someone at SCO
# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
#
# Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
#
# S1 1 2 3 4:
# D D D D 9600 D D D U 50 D D U D 75 D D U U 110
# D U D D 135 D U D U 150 D U U D 300 D U U U 600
# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
#
# S1 5 6 7 8:
# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
# D U D D 8O1 D U U U 8E2
#
# S1 9 Autowrap (U = on, D = off)
# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
# S2 1 Mode (U = block, D = conversational)
# S2 2 Duplex (U = half, D = full)
# S2 3 Hertz (U = 50, D = 60)
# S2 4 Edit mode (U = local, D = duplex)
# S2 5 Cursor type (U = underline, D = block)
# S2 6 Cursor down key (U = send ^J, D = send ^V)
# S2 7 Screen colour (U = green on black, D = black on green)
# S2 8 DSR status (pin 6) (U = disconnected, D = connected)
# S2 9 DCD status (pin 8) (U = disconnected, D = connected)
# S2 10 DTR status (pin 20) (U = disconnected, D = connected)
#
tvi910+|televideo 910+,
dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
ll=\E=7\s, use=tvi910,
# (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
# <khome> from BRL entry -- esr)
tvi912|tvi914|tvi920|old televideo 912/914/920,
OTbs, OTpt, am, msgr,
cols#80, it#8, lines#24, xmc#1,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
tbc=\E3,
# We got some new tvi912c terminals that act really weird on the regular
# termcap, so one of our gurus worked this up. Seems that cursor
# addressing is broken.
tvi912cc|tvi912 at cowell college,
cup@, use=tvi912c,
# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
# From: Benjamin C. W. Sittler
#
# Someone has put a scanned copy of the manual online at:
# http://vt100.net/televideo/912b-om/
#
# These terminals were produced ca. 1979, and had a 12" monochrome
# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
# ASCII, and were generally similar to adm3a but with attributes
# (including some with magic cookies), fancy half-duplex mode, and
# different bugs.
#
# Some operations reqire truly incredible amounts of padding. The
# insert_line (<il1>) and delete_line (<dl1>) operations in particular
# are so slow as to be nearly unusable.
#
# There may or may not have been a separate, earlier series of 912/920
# terminals (without the "B" and "C" suffix); I have never seen one,
# and the manual only describes the "B" and "C" series. The 912 and 920
# are quite distinct from the 914 and 924, which were much nicer non-
# magic-cookie terminals similar to the 950.
#
# This is a new description for the following TeleVideo terminals,
# distinguished chiefly by their keyboards:
#
# TVI-912B - very odd layout, no function keys (84 keys)
# TVI-920B - typewriter layout, no function keys (103 keys)
# TVI-912C - very odd layout, function keys F1-F11 (82 keys)
# TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
#
# To choose a setting for the TERM variable, start with the model:
#
# Model || base name
# ----------||-----------
# TVI-912B || tvi912b
# TVI-912C || tvi912c
# TVI-920B || tvi920b
# TVI-920C || tvi920c
#
# Then add a suffix from the following table describing installed options
# and how you'd like to use the terminal:
#
# Use Video | Second | Visual | Magic | Page || feature
# Attributes | Page | Bell | Cookies | Print || suffix
# ------------|--------|--------|---------|-------||---------
# No | No | N/A | N/A | No || -unk
# No | No | N/A | N/A | Yes || -p
# No | Yes | No | N/A | No || -2p-unk
# No | Yes | No | N/A | Yes || -2p-p
# No | Yes | Yes | N/A | No || -vb-unk
# No | Yes | Yes | N/A | Yes || -vb-p
# Yes | No | N/A | No | N/A ||
# Yes | No | N/A | Yes | N/A || -mc
# Yes | Yes | No | No | N/A || -2p
# Yes | Yes | No | Yes | N/A || -2p-mc
# Yes | Yes | Yes | No | N/A || -vb
# Yes | Yes | Yes | Yes | N/A || -vb-mc
#
# So e.g. a model 920 C with second page memory option, visual bell
# and no magic cookies would be tvi920c-vb; a model 912 B without the
# second page memory option and using magic cookies would be
# tvi912b-mc
#
# PADDING
#
# At 9600 baud, the terminal is prone to overflow its input buffer
# during complex operations (insert/delete
# character/line/screen/page), and it does not signal this over the
# RS232 cable. The typical symptom of an overrun is that the terminal
# starts beeping, and output becomes garbled.
#
# The padding delays in this terminfo were derived using tack(1)
# running on a Linux box connected to a TVI-920C with a later-model
# (A49C1-style) ROM running at 9600 baud, so your mileage may
# vary. The numbers below seem to give the terminal enough time so
# that it doesn't overflow its input buffer and start losing
# characters.
#
# KEYS
#
# If you want to use the FUNCT key on a tvi912[bc], use the
# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
# the following table (these also work on the 920 series):
#
# Unshifted Function Keys:
#
# Key | capname|| Equivalent
# -----|--------||------------
# F1 | <kf1> || FUNCT + @
# F2 | <kf2> || FUNCT + A
# F3 | <kf3> || FUNCT + B
# F4 | <kf4> || FUNCT + C
# F5 | <kf5> || FUNCT + D
# F6 | <kf6> || FUNCT + E
# F7 | <kf7> || FUNCT + F
# F8 | <kf8> || FUNCT + G
# F9 | <kf9> || FUNCT + H
# F10 | <kf10> || FUNCT + I
# F11 | <kf11> || FUNCT + J
#
# Shifted Function Keys:
#
# SHIFT + Key | capname|| Equivalent
# -------------|--------||------------
# SHIFT + F1 | <kf12> || FUNCT + `
# SHIFT + F2 | <kf13> || FUNCT + a
# SHIFT + F3 | <kf14> || FUNCT + b
# SHIFT + F4 | <kf15> || FUNCT + c
# SHIFT + F5 | <kf16> || FUNCT + d
# SHIFT + F6 | <kf17> || FUNCT + e
# SHIFT + F7 | <kf18> || FUNCT + f
# SHIFT + F8 | <kf19> || FUNCT + g
# SHIFT + F9 | <kf20> || FUNCT + h
# SHIFT + F10 | <kf21> || FUNCT + i
# SHIFT + F11 | <kf22> || FUNCT + j
#
# PORTS AND SWITCH SETTINGS
#
# Here are the switch settings for the TVI-912B/TVI-920B and
# TVI-912C/TVI-920C:
#
# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
# 2: 9600 3: 4800 4: 2400 5: 1200
# 6: 600 7: 300 8: 150 9: 75
# 10: 110
#
# S2 UART/Terminal options:
# Up Down
# 1: Not used Not allowed
# 2: Alternate character set Standard character set
# 3: Full duplex Half duplex
# 4: 50 Hz refresh 60 Hz refresh
# 5: No parity Send parity
# 6: 2 stop bits 1 stop bit
# 7: 8 data bits 7 data bits
# 8: Not used Not allowed on Rev E or lower
# 9: Even parity Odd parity
# 10: Steady cursor Blinking cursor
# (On Rev E or lower, use W25 instead of switch 10.)
#
# S5 UART/Terminal options:
# Open Closed
# 1: P3-6 Not connected DSR received on P3-6
# 2: P3-8 Not connected DCD received on P3-8
#
# 3 Open, 4 Open: P3-20 Not connected
# 3 Open, 4 Closed: DTR on when terminal is on
# 3 Closed, 4 Open: DTR is connected to RTS
# 3 Closed, 4 Closed: Not allowed
#
# 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
# all data transmitted out of the modem port (P3) will also be
# transmitted out of the printer port (P4).
#
# 6 Open, 7 Open: Not allowed
# 6 Open, 7 Closed: 20ma current loop input
# 6 Closed, 7 Open: RS232 input
# 6 Closed, 7 Closed: Not allowed
#
# Jumper options:
# If the jumper is installed, the effect will occur (the next time the terminal
# is switched on).
#
# S4/W31: Enables automatic LF upon receipt of CR from
# remote or keyboard.
# S4/W32: Enables transmission of EOT at the end of Send. If not
# installed, a carriage return is sent.
# S4/W33: Disables automatic carriage return in column 80.
# S4/W34: Selects Page Print Mode as initial condition. If not
# installed, Extension Mode is selected.
#
# NON-STANDARD CAPABILITIES
#
# Sending <u9> or <u7> returns a cursor position report in the format
# YX\r, where Y and X are as in <cup>. This format is described in
# <u8> and <u6>, but it's not clear how one should write an
# appropriate scanf string, since we need to subtract %' ' from the
# character after reading it. The <u9> capability is used by tack(1)
# to synchronize during padding tests, and seems to work for that
# purpose.
#
# This description also includes the obsolete termcap capabilities
# has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
#
# FEATURES NOT YET DESCRIBED IN THIS TERMINFO
#
# The FUNCT modifier actually works with every normal key by sending
# ^AX\r, where X is the sequence normally sent by that key. This is a
# sort of meta key not currently describable in terminfo.
#
# There are quite a few other keys (especially on the 920 models,) but
# they are for the most part only useful in block mode.
#
# These terminals have lots of forms manipulation features, mainly
# useful in block mode, including "clear X to nulls" (vs. "clear X to
# spaces"; nulls are sentinels for "send X" operations); "send X"
# operations for uploading all or part of the screen; and block-mode
# editing keys (they don't send escape sequences, but manipulate video
# memory directly). Block mode is used for local editing, and protect
# mode (in conjunction with the "write protect" attribute,
# a.k.a. half-intensity outside of protect mode) is used to control
# which parts of the screen are edited/sent/printed (by <mc0>).
#
# There are at least two major families of ROM, "early" and
# A49B1/A49C1; the major difference seems to be that the latter ROMs
# support a few extra escape sequences for manipulating the off-screen
# memory page, and for sending whole pages back to the host (mainly
# useful in block mode.) The descriptions in this file don't use any
# of those sequences: set cursor position including page (\E-PYX,
# where P is \s for page 0 and ! for page 1 [actually only the LSB of
# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
# as in <cup>); read cursor position (\E/), which is analogous to <u9>
# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
# are as in <cup>, and some "send page" features mainly useful for
# forms manipulation.
#
# The keyboard enable (\E") and disable (\E#) sequences are unused,
# except that a terminal reset (<is2>) enables the keyboard.
#
# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
# enabled in <is2>, but auto-flip is very jarring so we don't use it.
#
# BUGS
#
# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
# sequences (I infer that in some TeleVideo terminal they may invert
# and uninvert the display) so the <flash> sequence given here is a
# cheesy page-flip instead.
#
# The back_tab (<cbt>) sequence (\EI) doesn't work according to
# tack(1), so it is not included in the descriptions below.
#
# It's not clear whether auto_left_margin (<bw>) flag should be set
# for these terminals; tack says yes, so it is set here, but this
# differs from other descriptions I've seen.
#
# Extension print mode (<mc5>) echoes all characters to the printer
# port [in addition to displaying them] except for the page print mode
# sequence (<mc4>); this is a slight violation of the terminfo
# definition for <mc5> but I don't expect it to cause problems. We
# reset to page print mode in <rs1> since it may have been enabled
# accidentally.
#
# The descriptions with plus signs (+) are building blocks.
tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
OTbs, OTpt, am, bw,
cols#80, it#8, lines#24,
bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
u7=\E?, u8=%c%c\r, u9=\E?,
# This isn't included in the basic capabilities because it is
# typically unusable in combination with the full range of video
# attributes, since the magic cookie attributes turn into ASCII
# control characters, and the half-intensity ("protected") attribute
# converts all affected characters to spaces.
tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
mc0=\EP,
# This uses half-intensity mode (<dim>) for standout (<smso>), and
# exposes no other attributes (half-intensity is the only attribute
# that does not generate a magic cookie.)
tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
msgr,
dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
smso=\E),
# Full magic-cookie attribute support, with half-intensity reverse
# video for standout. Note that we add a space in the <dim> sequence
# to give a consistent magic-cookie count. Also note that <sgr> uses
# backspacing (in the TVI-supported order) to apply all requested
# attributes with only a single magic cookie.
tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
xmc#1,
blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
rmul=\Em,
sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
# This uses the second page memory option to save & restore screen
# contents. If your terminal is missing the option, this description
# should still work, but that has not been tested.
tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
# This simulates flashing by briefly toggling to the other page
# (kludge!)
tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
bel=\EK$<100>\EK, use=tvi912b+2p,
# Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r,
# Combinations of the basic building blocks
tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
use=tvi912b+2p, use=tvi912b-unk,
tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
use=tvi912b+vb, use=tvi912b-unk,
tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
use=tvi912b+printer, use=tvi912b-unk,
tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
use=tvi912b+dim, use=tvi912b-unk,
tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
use=tvi912b+mc, use=tvi912b-unk,
tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
use=tvi920b+fn, use=tvi912b-unk,
tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
use=tvi912b-unk,
tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
use=tvi912b-unk,
tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
use=tvi912b-unk,
tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
use=tvi912b-unk,
tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
use=tvi912b-unk,
tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
use=tvi912b-unk,
tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
# Televideo 921 and variants
# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
# (tvi921: removed :ko=bt: before translation, I see no backtab cap;
# also added empty <acsc> to suppress tic warning -- esr)
tvi921|televideo model 921 with sysline same as page & real vi function,
OTbs, OTpt, am, hs, xenl, xhp,
cols#80, lines#24, xmc#0,
acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
# without the beeper
# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
# also added empty <acsc> to suppress tic warning -- esr)
tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
am, hs, xenl, xhp,
cols#80, lines#24, xmc#0,
acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
dl1=\ER$<2*/>, il1=\EE$<2*/>,
is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
kil1=\EE$<2*/>, use=tvi92B,
# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
# in from a BSD termcap file because it looks like they do something the
# old ones skip -- esr)
tvi924|televideo tvi924,
am, bw, hs, in, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80, xmc#0,
bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
use=adm+sgr,
# TVI925 DIP switches. In each of these, D = Down and U = Up,
#
# Here are the settings for the external (baud) switches (S1):
#
# Position Baud
# 7 8 9 10 [Printer]
# 1 2 3 4 [Main RS232]
# -----------------------------------------------------
# D D D D 9600
# D D D U 50
# D D U D 75
# D D U U 110
# D U D D 135
# D U D U 150
# D U U D 300
# D U U U 600
# U D D D 1200
# U D D U 1800
# U D U D 2400
# U D U U 3600
# U U D D 4800
# U U D U 7200
# U U U D 9600
# U U U U 19200
#
#
# Settings for word length and stop-bits (S1)
#
# Position Description
# 5 6
# ---------------------------
# U - 7-bit word
# D - 8-bit word
# - U 2 stop bits
# - D 1 stop bit
#
#
# S2 (external) settings
#
# Position Up Dn Description
# --------------------------------------------
# 1 X Local edit
# X Duplex edit (transmit editing keys)
# --------------------------------------------
# 2 X 912/920 emulation
# X 925
# --------------------------------------------
# 3 X
# 4 X No parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Odd parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Even parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Mark parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Space parity
# 5 X
# --------------------------------------------
# 6 X White on black display
# X Black on white display
# --------------------------------------------
# 7 X Half Duplex
# 8 X
# --------------------------------------------
# 7 X Full Duplex
# 8 X
# --------------------------------------------
# 7 X Block mode
# 8 X
# --------------------------------------------
# 9 X 50 Hz
# X 60 Hz
# --------------------------------------------
# 10 X CR/LF (Auto LF)
# X CR only
#
# S3 (internal switch) settings:
#
# Position Up Dn Description
# --------------------------------------------
# 1 X Keyclick off
# X Keyclick on
# --------------------------------------------
# 2 X English
# 3 X
# --------------------------------------------
# 2 X German
# 3 X
# --------------------------------------------
# 2 X French
# 3 X
# --------------------------------------------
# 2 X Spanish
# 3 X
# --------------------------------------------
# 4 X Blinking block cursor
# 5 X
# --------------------------------------------
# 4 X Blinking underline cursor
# 5 X
# --------------------------------------------
# 4 X Steady block cursor
# 5 X
# --------------------------------------------
# 4 X Steady underline cursor
# 5 X
# --------------------------------------------
# 6 X Screen blanking timer (ON)
# X Screen blanking timer (OFF)
# --------------------------------------------
# 7 X Page attributes
# X Line attributes
# --------------------------------------------
# 8 X DCD disconnected
# X DCD connected
# --------------------------------------------
# 9 X DSR disconnected
# X DSR connected
# --------------------------------------------
# 10 X DTR Disconnected
# X DTR connected
# --------------------------------------------
#
# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
tvi925|televideo 925,
OTbs, am, bw, hs, ul,
cols#80, lines#24, xmc#1,
bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
tsl=\Eh\Ef, use=adm+sgr,
# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
# to avoid "magic cookie" standout glitch:
tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
xmc@,
kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
# for additional capabilities,
# The following tvi descriptions from B:pjphar and virus!mike
# is for all 950s. It sets the following attributes:
# full duplex (\EDF) write protect off (\E()
# conversation mode (\EC) graphics mode off (\E%)
# white on black (\Ed) auto page flip off (\Ew)
# turn off status line (\Eg) clear status line (\Ef\r)
# normal video (\E0) monitor mode off (\EX or \Eu)
# edit mode (\Er) load blank char to space (\Ee\040)
# line edit mode (\EO) enable buffer control (^O)
# protect mode off (\E\047) duplex edit keys (\El)
# program unshifted send key to send line all (\E016)
# program shifted send key to send line unprotected (\E004)
# set the following to nulls:
# field delimiter (\Ex0\200\200)
# line delimiter (\Ex1\200\200)
# start-protected field delimiter (\Ex2\200\200)
# end-protected field delimiter (\Ex3\200\200)
# set end of text delimiter to carriage return/null (\Ex4\r\200)
#
# TVI 950 Switch Setting Reference Charts
#
# TABLE 1:
#
# S1 1 2 3 4 5 6 7 8 9 10
# +-----------------------+-----+-----+-----------------------+
# | Computer Baud Rate |Data |Stop | Printer Baud Rate |
# | |Bits |Bits | |
# +------+-----------------------+-----+-----+-----------------------+
# | Up | See | 7 | 2 | See |
# +------+-----------------------+-----+-----+-----------------------+
# | Down | TABLE 2 | 8 | 1 | TABLE 2 |
# +------+-----------------------+-----+-----+-----------------------+
#
#
# S2 1 2 3 4 5 6 7 8 9 10
# +-----+-----+-----------------+-----+-----------+-----+-----+
# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
# | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
#
# TABLE 2:
#
# +-----------+-----+-----+-----+-----+-----------+
# | Display | 1 | 2 | 3 | 4 | Baud |
# +-----------+-----+-----+-----+-----+ |
# | Printer | 7 | 8 | 9 | 10 | Rate |
# +-----------+-----+-----+-----+-----+-----------+
# | D | D | D | D | 9600 |
# | U | D | D | D | 50 |
# | D | U | D | D | 75 |
# | U | U | D | D | 110 |
# | D | D | U | D | 135 |
# | U | D | U | D | 150 |
# | D | U | U | D | 300 |
# | U | U | U | D | 600 |
# | D | D | D | U | 1200 |
# | U | D | D | U | 1800 |
# | D | U | D | U | 2400 |
# | U | U | D | U | 3600 |
# | D | D | U | U | 4800 |
# | U | D | U | U | 7200 |
# | D | U | U | U | 9600 |
# | U | U | U | U | 19200 |
# +-----+-----+-----+-----+-----------+
#
# TABLE 3:
# +-----+-----+-----+-----------+
# | 3 | 4 | 5 | Parity |
# +-----+-----+-----+-----------+
# | X | X | D | None |
# | D | D | U | Odd |
# | D | U | U | Even |
# | U | D | U | Mark |
# | U | U | U | Space |
# +-----+-----+-----+-----------+
# X = don't care
#
# CHART:
# +-----+-----+-----------------+
# | 7 | 8 | Communication |
# +-----+-----+-----------------+
# | D | D | Half Duplex |
# | D | U | Full Duplex |
# | U | D | Block |
# | U | U | Local |
# +-----+-----+-----------------+
#
# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
# should be present and all tvi native modes use the same string for this.
# Finally, note that BSD has cud1=^V. -- esr)
tvi950|televideo 950,
OTbs, am, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, xmc#1,
acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
invis@,
is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
use=adm+sgr,
#
# is for 950 with two pages adds the following:
# set 48 line page (\E\\2)
# place cursor at page 0, line 24, column 1 (\E-07 )
# set local (no send) edit keys (\Ek)
#
# two page 950 adds the following:
# when entering ex, set 24 line page (\E\\1)
# when exiting ex, reset 48 line page (\E\\2)
# place cursor at 0,24,1 (\E-07 )
# set duplex (send) edit keys (\El) when entering vi
# set local (no send) edit keys (\Ek) when exiting vi
#
tvi950-2p|televideo950 w/2 pages,
is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
smkx=\El, use=tvi950,
#
# is for 950 with four pages adds the following:
# set 96 line page (\E\\3)
# place cursor at page 0, line 24, column 1 (\E-07 )
#
# four page 950 adds the following:
# when entering ex, set 24 line page (\E\\1)
# when exiting ex, reset 96 line page (\E\\3)
# place cursor at 0,24,1 (\E-07 )
#
tvi950-4p|televideo950 w/4 pages,
is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
smkx=\El, use=tvi950,
#
# <is2> for reverse video 950 changes the following:
# set reverse video (\Ed)
#
# set vb accordingly (\Ed ...delay... \Eb)
#
tvi950-rv|televideo950 rev video,
flash=\Ed$<200/>\Eb,
is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
use=tvi950,
# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
tvi950-rv-2p|televideo950 rev video w/2 pages,
flash=\Ed$<200/>\Eb,
is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
smkx=\El, use=tvi950,
# tvi950-rv uses the appropriate entries from 950-4p and 950-rv
tvi950-rv-4p|televideo950 rev video w/4 pages,
flash=\Ed$<200/>\Eb,
is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
smkx=\El, use=tvi950,
# From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
# the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
# the :ko: string had :cl: in it, which means that one of the original
# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
# the 950 has. Finally, corrected the <kel> string to match the 950 and what
# ko implies -- esr)
# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
# also work.
tvi955|televideo 955,
OTbs, mc5i, msgr@,
it#8, xmc@,
acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
rmam=\E[=7l, rmxon=^N,
rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
use=tvi950,
tvi955-w|955-w|televideo955 w/132 cols,
cols#132,
is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
# use half-intensity as normal mode, full intensity as <bold>
tvi955-hb|955-hb|televideo955 half-bright,
bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
sgr0=\EG0\E[=5h, use=tvi955,
# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
# it does to the function keys. I deduced <rmam>/<smam>.
# also added empty <acsc> to suppress tic warning, -- esr)
tvi970|televideo 970,
OTbs, OTpt, am, da, db, mir, msgr,
cols#80, it#8, lines#24,
acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
smul=\E[4m, vpa=\E[%i%p1%dd,
tvi970-vb|televideo 970 with visual bell,
flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
use=tvi970,
tvi970-2p|televideo 970 with using 2 pages of memory,
rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
use=tvi970,
# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
# per line (rather than 40), Esc K chooses the normal character set. Not sure
# padding is needed, but adapted from the tvi920c termcap. The <smso> and
# <smul> strings are klutzy, but at least use no screen space.
# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
# its absence means <smam>=\Ev isn't safe to use. -- esr)
# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
tvipt|televideo personal terminal,
OTbs, am,
cols#80, lines#24,
cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
tvi9065|televideo 9065,
am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
wnum#0, wsl#30,
acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
ip=$<3>,
is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
pfkey=\E|%p1%{48}%+%c3%p2%s\031,
pfloc=\E|%p1%{48}%+%c2%p2%s\031,
pfx=\E|%p1%{48}%+%c1%p2%s\031,
pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
rep=\E[%p2%db%p1%c, rev=\EG4,
rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
#### Visual (vi)
#
# In September 1993, Visual Technology of Westboro, Massachusetts,
# merged with White Pine Software of Nashua, New Hampshire.
#
# White Pine Software may be contacted at +1 603/886-9050.
# Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
#
# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
# Recently I hacked together the following termcap for Visual
# Technology's Visual 50 terminal. It's a slight modification of
# the vt52 termcap.
# It's intended to run when the Visual 50 is in vt52 emulation mode
# (I know what you're thinking; if it's emulating a vt52, then why
# another termcap? Well, it turns out that the Visual 50 can handle
# <dl1> and db(?) among other things, which the vt52 can't)
# The termcap works OK for the most part. The only problem is on
# character inserts. The whole line gets painfully redrawn for each
# character typed. Any suggestions?
# Beau's entry is combined with the vi50 entry from University of Wisconsin.
# Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
# disguise; <kf7>-<kf9> are really l1-l3.
vi50|visual 50,
OTbs, OTpt, am, da, db, msgr,
cols#80, it#8, lines#24,
OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
# this one was BSD & SCO's vi50
vi50adm|visual 50 in adm3a mode,
am, msgr,
cols#80, it#8, lines#24,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
rmso=\ET, smso=\EU,
# From: Jeff Siegal <jbs@quiotix.com>
vi55|Visual 55,
OTbs, am, mir, msgr,
cols#80, it#8, lines#24,
clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
smir=\Ea, smso=\EU,
# Visual 200 from BRL
# The following switch settings are assumed for normal operation:
# FULL_DUPLEX SCROLL CR
# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
# Other switches may be set for operator convenience or communication
# requirements.
# Character insertion is kludged in order to get around the "beep" misfeature.
# (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
# and <dl1> strings, but we seem to get along fine without them.
vi200|visual 200,
OTbs, OTpt, am, mir, msgr,
OTkn#10, cols#80, it#8, lines#24,
acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
rmacs=\EG, rmkx=\E>, rmso=\E3,
rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
smkx=\E=, smso=\E4, tbc=\Eg,
# The older Visuals didn't come with function keys. This entry uses
# <smkx> and <rmkx> so that the keypad keys can be used as function keys.
# If your version of vi doesn't support function keys you may want
# to use vi200-f.
vi200-f|visual 200 no function keys,
is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
use=vi200,
vi200-rv|visual 200 reverse video,
cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
# the function keys are programmable but we don't reprogram them to their
# default values with <is2> because programming them is very verbose. maybe
# an initialization file should be made for the 300 and they could be stuck
# in it.
# (vi300: added <rmam>/<smam> based on init string -- esr)
vi300|visual 300 ansi x3.64,
am, bw, mir, xenl,
cols#80, lines#24,
bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
il1=\E[L, ind=^J,
is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
smso=\E[1m, smul=\E[4m,
# some of the vi300s have older firmware that has the command
# sequence for setting editing extent reversed.
vi300-old|visual 300 with old firmware (set edit extent reversed),
is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
use=vi300,
# Visual 500 prototype entry from University of Wisconsin.
# The best place to look for the escape sequences is page A1-1 of the
# Visual 500 manual. The initialization sequence given here may be
# overkill, but it does leave out some of the initializations which can
# be done with the menus in set-up mode.
# The :xp: line below is so that emacs can understand the padding requirements
# of this slow terminal. :xp: is 10 time the padding factor.
# (vi500: removed unknown :xp#4: termcap;
# also added empty <acsc> to suppress tic warning -- esr)
vi500|visual 500,
am, mir, msgr,
cols#80, it#8, lines#33,
acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
ind=^J,
is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
# The visual 550 is a visual 300 with tektronix graphics,
# and with 33 lines. clear screen is modified here to
# also clear the graphics.
vi550|visual 550 ansi x3.64,
lines#33,
clear=\030\E[H\E[2J, use=vi300,
vi603|visual603|visual 603,
hs, mir,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
use=vt100,
#### Wyse (wy)
#
# Wyse Technology
# 3471 North First Street
# San Jose, CA 95134
# Vox: (408)-473-1200
# Fax: (408) 473-1222
# Web: http://www.wyse.com
#
# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
# obvious address, <http://www.wyse.com>. They keep terminfo entries at
# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
#
# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
# They now own the Qume and Amdek brands, too. So these are the people to
# talk with about all Link, Qume, and Amdek terminals.
#
# These entries include a few small fixes.
# I canceled the bel capacities in the vb entries.
# I made two trivial syntax fixes in the wyse30 entry.
# I made some entries relative to adm+sgr.
#
#
# Note: The wyse75, wyse85, and wyse99 have been discontinued.
# Although the Wyse 30 can support more than one attribute
# it requires magic cookies to do so. Many applications do not
# function well with magic cookies. The following terminfo uses
# the protect mode to support one attribute (dim) without cookies.
# If more than one attribute is needed then the wy30-mc terminfo
# should be used.
#
wy30|wyse30|Wyse 30,
am, bw, hs, mc5i, mir, msgr, xon,
cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
smso=\E`7\E), tbc=\E0, tsl=\EF,
#
# This terminal description uses the non-hidden attribute mode
# (with magic cookie).
#
# (wy30-mc: added <smcup> to suppress tic warning --esr)
wy30-mc|wyse30-mc|wyse 30 with magic cookies,
msgr@,
ma@, xmc#1,
blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
rmcup=\EG0, rmso=\EG0,
sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
smso=\EG4, use=wy30, use=adm+sgr,
# The mandatory pause used by <flash> does not work with
# older versions of terminfo. If you see this effect then
# unset xon and delete the / from the delay.
# i.e. change $<100/> to $<100>
wy30-vb|wyse30-vb|wyse 30 visible bell,
bel@, use=wy30,
#
# The Wyse 50 can support one attribute (e.g. Dim, Inverse,
# Normal) without magic cookies by using the protect mode.
# The following description uses this feature, but when more
# than one attribute is put on the screen at once, all attributes
# will be changed to be the same as the last attribute given.
# The Wyse 50 can support more attributes when used with magic
# cookies. The wy50-mc terminal description uses magic cookies
# to correctly handle multiple attributes on a screen.
#
wy50|wyse50|Wyse 50,
am, bw, hs, mc5i, mir, msgr, xon,
cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
pfx=\Ez%p1%{63}%+%c%p2%s\177,
pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
smso=\E`6\E), tbc=\E0, tsl=\EF,
#
# This terminal description uses the non-hidden attribute mode
# (with magic cookie).
#
# The mandatory pause used by flash does not work with some
# older versions of terminfo. If you see this effect then
# unset <xon> and delete the / from the delay.
# i.e. change $<100/> to $<100>
# (wy50-mc: added <smcup> to suppress tic warning --esr)
wy50-mc|wyse50-mc|wyse 50 with magic cookies,
msgr@,
ma@, xmc#1,
blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
smso=\EGt, use=wy50, use=adm+sgr,
wy50-vb|wyse50-vb|wyse 50 visible bell,
bel@, use=wy50,
wy50-w|wyse50-w|wyse 50 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
use=wy50,
wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
bel@, use=wy50-w,
#
# The Wyse 350 is a Wyse 50 with color.
# Unfortunately this means that it has magic cookies.
# The color attributes are designed to overlap the reverse, dim and
# underline attributes. This is nice for monochrome applications
# because you can make underline stuff green (or any other color)
# but for true color applications it's not so hot because you cannot
# mix color with reverse, dim or underline.
# To further complicate things one of the attributes must be
# black (either the foreground or the background). In reverse video
# the background changes color with black letters. In normal video
# the foreground changes colors on a black background.
# This terminfo uses some of the more advanced features of curses
# to display both color and blink. In the final analysis I am not
# sure that the wy350 runs better with this terminfo than it does
# with the wy50 terminfo (with user adjusted colors).
#
# The mandatory pause used by flash does not work with
# older versions of terminfo. If you see this effect then
# unset xon and delete the / from the delay.
# i.e. change $<100/> to $<100>
#
# Bug: The <op> capability resets attributes.
wy350|wyse350|Wyse 350,
am, bw, hs, mc5i, mir, xon,
colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
wsl#45, xmc#1,
acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
pfx=\Ez%p1%{63}%+%c%p2%s\177,
pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
wy350-vb|wyse350-vb|wyse 350 visible bell,
bel@, use=wy350,
wy350-w|wyse350-w|wyse 350 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
use=wy350,
wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
bel@, use=wy350-w,
#
# This terminfo description is untested.
# The wyse100 emulates an adm31, so the adm31 entry should work.
#
wy100|wyse 100,
hs, mir,
cols#80, lines#24, xmc#1,
bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
#
# The Wyse 120/150 has most of the features of the Wyse 60.
# This terminal does not need padding up to 9600 baud!
# <msgr> should be set but the clear screen fails when in
# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
# then set <msgr>.
#
wy120|wyse120|wy150|wyse150|Wyse 120/150,
am, bw, hs, km, mc5i, mir, msgr, xon,
cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
pfx=\EZ1%p1%{63}%+%c%p2%s\177,
pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
rs3=\EwG\Ee($<100>,
sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
tbc=\E0, tsl=\EF, use=adm+sgr,
#
wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
rs2=\E`;$<70>, use=wy120,
#
wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy120,
#
wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
#
wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
bel@, use=wy120,
#
wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
bel@, use=wy120-w,
#
# The Wyse 60 is like the Wyse 50 but with more padding.
# The reset strings are slow and the pad times very depending
# on other parameters such as font loading. I have tried
# to follow the following outline:
#
# <rs1> -> set personality
# <rs2> -> set number of columns
# <rs3> -> set number of lines
# <is1> -> select the proper font
# <is2> -> do the initialization
# <is3> -> set up display memory (2 pages)
#
# The Wyse 60's that have vt100 emulation are slower than the
# older Wyse 60's. This change happened mid-1987.
# The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
#
# The meta key is only half right. This terminal will return the
# high order bit set when you hit CTRL-function_key
#
# It may be useful to assign two function keys with the
# values \E=(\s look at old data in page 1
# \E=W, look at bottom of page 1
# where \s is a space ( ).
#
# Note:
# The Wyse 60 runs faster when the XON/XOFF
# handshake is turned off.
#
# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
wy60|wyse60|Wyse 60,
am, bw, hs, km, mc5i, mir, msgr,
cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
ip=$<3>, is1=\EcB0\EcC1,
is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
pfx=\EZ1%p1%{63}%+%c%p2%s\177,
pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
tbc=\E0, tsl=\EF, use=adm+sgr,
#
wy60-w|wyse60-w|wyse 60 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
rs2=\EeF$<150>\E`;$<150>, use=wy60,
#
wy60-25|wyse60-25|wyse 60 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy60,
wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
#
wy60-42|wyse60-42|wyse 60 80-column 42-lines,
lines#42,
clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
cols#132, lw#7, nlab#16, wsl#97,
clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
#
wy60-43|wyse60-43|wyse 60 80-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy60-42,
wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy60-42-w,
#
wy60-vb|wyse60-vb|Wyse 60 visible bell,
bel@, use=wy60,
wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
bel@, use=wy60-w,
# The Wyse-99GT looks at lot like the Wyse 60 except that it
# does not have the 42/43 line mode. In the Wyse-60 the "lines"
# setup parameter controls the number of lines on the screen.
# For the Wyse 99GT the "lines" setup parameter controls the
# number of lines in a page. The screen can display 25 lines max.
# The Wyse-99GT also has personalities for the VT220 and
# Tektronix 4014. But this has no bearing on the native mode.
#
# (msgr) should be set but the clear screen fails when in
# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
# then set msgr, else use msgr@.
#
# u0 -> enter Tektronix mode
# u1 -> exit Tektronix mode
#
wy99gt|wyse99gt|Wyse 99gt,
msgr@,
clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
u0=\E~>\E8, u1=\E[42h, use=wy60,
#
wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
cols#132, lw#7, nlab#16, wsl#97,
clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
use=wy99gt,
#
wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
#
wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs2=\E`;$<150>, use=wy99gt-w,
#
wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
bel@, use=wy99gt,
#
wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
bel@, use=wy99gt-w,
# Can't set tabs! Other bugs (ANSI mode only):
# - can't redefine function keys (anyway, key redefinition in ANSI mode
# is too much complex to be described);
# - meta key can't be described (the terminal forgets it when reset);
# The xon-xoff handshaking can't be disabled while in ansi personality, so
# emacs can't work at speed greater than 9600 baud. No padding is needed at
# this speed.
# dch1 has been commented out because it causes annoying glittering when
# vi deletes one character at the beginning of a line with tabs in it.
# dch makes sysgen(1M) have a horrible behaviour when deleting
# a screen and makes screen(1) behave badly, so it is disabled too. The nice
# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
# not, so smir and rmir are commented out as well.
# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
am, km, mc5i, mir, msgr, xenl,
cols#80, it#8, lines#25, vt#3,
acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
il1=\E[L, ind=\n$<1>, invis=\E[8m,
is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
# This is the american terminal. Here tabs work fine.
# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
# This terminal (firmware version 02) has a lot of bugs:
# - can't set tabs;
# - other bugs in ANSI modes (see above).
# This description disables handshaking when using cup. This is because
# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
# cannot be used at speeds greater than 9600 baud, because at greater
# speeds handshaking is needed even for character sending. If you use
# DTR handshaking, you can use even greater speeds.
# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
am, bw, hs, km, mc5i, mir, msgr, xon,
cols#80, it#8, lines#25, wsl#46,
acsc='x+y.wi~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
ind=^J, invis=\EG3,
is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
# This is the american terminal. Here tabs work.
# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
hts=\E1, tbc=\E0, use=wy99f,
#
# The Wyse 160 is combination of the WY-60 and the WY-99gt.
# The reset strings are slow and the pad times very depending
# on other parameters such as font loading. I have tried
# to follow the following outline:
#
# <rs1> -> set personality
# <rs2> -> set number of columns
# <rs3> -> set number of lines
# <is1> -> select the proper font
# <is2> -> do the initialization
# <is3> -> set up display memory (2 pages)
#
# The display memory may be used for either text or graphics.
# When "Display Memory = Shared" the terminal will have more pages
# but garbage may be left on the screen when you switch from
# graphics to text. If "Display Memory = Unshared" then the
# text area will be only one page long.
#
# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
wy160|wyse160|Wyse 160,
am, bw, hs, km, mc5i, mir, msgr,
cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
pfx=\EZ1%p1%{63}%+%c%p2%s\177,
pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
tbc=\E0, tsl=\EF, use=adm+sgr,
#
wy160-w|wyse160-w|wyse 160 132-column,
cols#132, lw#7, nlab#16, wsl#90,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
rs2=\EeF$<150>\E`;$<150>, use=wy160,
#
wy160-25|wyse160-25|wyse 160 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy160,
wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
#
wy160-42|wyse160-42|wyse 160 80-column 42-lines,
lines#42,
clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
rs3=\Ee*$<150>, use=wy160,
wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
cols#132, lw#7, nlab#16, wsl#90,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
#
wy160-43|wyse160-43|wyse 160 80-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy160-42,
wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy160-42-w,
#
wy160-vb|wyse160-vb|Wyse 160 visible bell,
bel@, use=wy160,
wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
bel@, use=wy160-w,
#
# The Wyse 75 is a vt100 lookalike without advanced video.
#
# The Wyse 75 can support one attribute (e.g. Dim, Inverse,
# Underline) without magic cookies. The following description
# uses this capability, but when more than one attribute is
# put on the screen at once, all attributes will be changed
# to be the same as the last attribute given.
# The Wyse 75 can support more attributes when used with magic
# cookies. The wy75-mc terminal description uses magic cookies
# to correctly handle multiple attributes on a screen.
#
wy75|wyse75|wyse 75,
am, hs, mc5i, mir, msgr, xenl, xon,
cols#80, lines#24, ma#1, pb#1201, wsl#78,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
ind=\n$<2>, ip=$<1>,
is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
sc=\E7,
sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
#
# This terminal description uses the non-hidden attribute mode
# (with magic cookie).
#
wy75-mc|wyse75-mc|wyse 75 with magic cookies,
msgr@,
ma@, xmc#1,
blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
use=wy75,
wy75-vb|wyse75-vb|wyse 75 with visible bell,
pb@,
bel@, use=wy75,
wy75-w|wyse75-w|wyse 75 in 132 column mode,
cols#132, wsl#130,
rs2=\E[35h\E[?3h$<80>, use=wy75,
wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
pb@,
bel@, use=wy75-w,
#
# Wyse 85 emulating a vt220 7 bit mode.
# 24 line screen with status line.
#
# The vt220 mode permits more function keys but it wipes out
# the escape key. I strongly recommend that <f11> be set to
# escape (esc).
# The terminal may have to be set for 8 data bits and 2 stop
# bits for the arrow keys to work.
# The Wyse 85 runs faster with XON/XOFF enabled. Also the
# <dch> and <ich> work best when XON/XOFF is set. <ich> and
# <dch> leave trash on the screen when used without XON/XOFF.
#
wy85|wyse85|wyse 85,
am, hs, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
rs3=\E[?5l, sc=\E7,
sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
#
# Wyse 85 with visual bell.
wy85-vb|wyse85-vb|wyse 85 with visible bell,
bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
#
# Wyse 85 in 132-column mode.
wy85-w|wyse85-w|wyse 85 in 132-column mode,
cols#132, wsl#132,
rs2=\E[35h\E[?3h$<70>, use=wy85,
#
# Wyse 85 in 132-column mode with visual bell.
wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
bel@, use=wy85-w,
# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
# This copes with an apparent firmware bug in the wy85. He writes:
# "What I did was change leave the terminal cursor keys set to Normal
# (instead of application), and change \E[ to \233 for all the keys in
# terminfo. At one point, I found some reference indicating that this
# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
# me), but I can't find that and the server under my bookmark to "Wyse
# Technical" isn't responding. So there's the question of wether the wy85
# terminfo should reflect the manufactuer's intended behaviour of the terminal
# or the actual."
wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
am, hs, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
rs3=\E[?5l, sc=\E7,
sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[40h\E7\E[25;%i%p1%dH,
#
# Wyse 185 emulating a vt320 7 bit mode.
#
# This terminal always displays 25 lines. These lines may be used
# as 24 data lines and a terminal status line (top or bottom) or
# 25 data lines. The 48 and 50 line modes change the page size
# and not the number of lines on the screen.
#
# The Compose Character key can be used as a meta key if changed
# by set-up.
#
wy185|wyse185|wyse 185,
am, hs, km, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
el=\E[K, el1=\E[1K, enacs=\E)0,
flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
use=vt220+keypad,
#
# Wyse 185 with 24 data lines and top status (terminal status)
wy185-24|wyse185-24|wyse 185 with 24 data lines,
hs@,
dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
use=wy185,
#
# Wyse 185 with visual bell.
wy185-vb|wyse185-vb|wyse 185+flash,
bel@, use=wy185,
#
# Wyse 185 in 132-column mode.
wy185-w|wyse185-w|wyse 185 in 132-column mode,
cols#132, wsl#132,
dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
#
# Wyse 185 in 132-column mode with visual bell.
wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
bel@, use=wy185-w,
# wy325 terminfo entries
# Done by Joe H. Davis 3-9-92
# lines 25 columns 80
#
wy325|wyse325|Wyse epc,
am, bw, hs, mc5i, mir,
cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
mc0=\EP, mc4=^T, mc5=\Ed#,
pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
pfx=\EZ1%p1%{63}%+%c%p2%s\177,
pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
rs3=\EwG\Ee($<100>,
sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
tsl=\EF, use=adm+sgr,
#
# lines 24 columns 80 vb
#
wy325-vb|wyse325-vb|wyse-325 with visual bell,
bel@, use=wy325,
#
# lines 24 columns 132
#
wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
rs2=\E`;$<70>, use=wy325,
#
# lines 25 columns 80
#
wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325,
#
# lines 25 columns 132
#
wy325-25w|wyse325-25w|wy325 132 columns,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
# lines 25 columns 132 vb
#
wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
bel@, use=wy325-w,
#
# lines 42 columns 80
#
wy325-42|wyse325-42|wyse-325 42 lines,
lh@, lines#42, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325,
#
# lines 42 columns 132
#
wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
lh@, lines#42, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
# lines 42 columns 132 vb
#
wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
bel@, use=wy325-w,
#
# lines 43 columns 80
#
wy325-43|wyse325-43|wyse-325 43 lines,
lh@, lines#43, lw@, nlab@,
pln@, use=wy325,
#
# lines 43 columns 132
#
wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
# lines 43 columns 132 vb
#
wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
bel@, use=wy325-w,
# Wyse 370 -- 24 line screen with status line.
#
# The terminal may have to be set for 8 data bits and 2 stop
# bits for the arrow keys to work.
#
# If you change keyboards the terminal will send different
# escape sequences.
# The following definition is for the basic terminal without
# function keys.
#
# <u0> -> enter Tektronix 4010/4014 mode
# <u1> -> exit Tektronix 4010/4014 mode
# <u2> -> enter ASCII mode (from any ANSI mode)
# <u3> -> exit ASCII mode (goto native ANSI mode)
# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
# <u5> -> exit Tek 4207 mode (goto native ANSI mode)
#
# Bug: The <op> capability resets attributes.
wy370-nk|wyse 370 without function keys,
am, ccc, hs, mc5i, mir, msgr, xenl, xon,
colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
ind=\n$<2>,
initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
mc5=\E[5i,
oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
#
# Function key set for the ASCII (wy-50 compatible) keyboard
# This is the default 370.
#
wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
knp=\E[U, kpp=\E[V, use=wy370-nk,
#
# Function key set for the VT-320 (and wy85) compatible keyboard
#
wy370-105k|Wyse 370 with 105 key keyboard,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
use=wy370-nk, use=vt220+keypad,
#
# Function key set for the PC compatible keyboard
#
wy370-EPC|Wyse 370 with 102 key keyboard,
kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
#
# Wyse 370 with visual bell.
wy370-vb|Wyse 370 with visible bell,
bel@, use=wy370,
#
# Wyse 370 in 132-column mode.
wy370-w|Wyse 370 in 132-column mode,
cols#132, wsl#132,
rs2=\E[35h\E[?3h$<70>, use=wy370,
#
# Wyse 370 in 132-column mode with visual bell.
wy370-wvb|Wyse 370 with visible bell 132-columns,
flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
wy370-rv|Wyse 370 reverse video,
rs3=\E[32h\E[?5h, use=wy370,
#
# Wyse 99gt Tektronix 4010/4014 emulator,
#
wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
am, os,
cols#74, lines#35,
bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
cuu1=^K, ff=^L,
hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
home=^]7`x @\037,
hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
#
# Wyse 160 Tektronix 4010/4014 emulator,
#
wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
home=^]8`g @\037, use=wy99gt-tek,
#
# Wyse 370 Tektronix 4010/4014 emulator,
#
wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
am, os,
cols#80, lines#36,
bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
cuu1=^K, ff=^L,
hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
home=^]8g @\037,
hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
# Vendor-supplied Wyse entries end here.
#
#TITLE: TERMINFO ENTRY WY520
#DATE: 8/5/93
# The WY520 terminfo is based on the WY285 entry published on the WYSE
# BBS with the addition of more function keys and special keys.
#
# rs1 -> set personality
# rs2 -> set number of columns
# rs3 -> set number of lines
# is1 -> select the proper font
# is2 -> do the initialization
# is3 -> If this string is empty then rs3 gets sent.
#
# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
# - The BS key is programmed to generate BS in smcup since
# is2 doesn't seem to work.
# - Remove and shift/Remove: delete a character
# - Insert : enter insert mode
# - Find : delete to end of file
# - Select : clear a line
# - F11, F12, F13: send default sequences (not ESC, BS, LF)
# - F14 : Home key
# - Bottom status line (host writable line) is used.
# - smkx,rmkx are removed because this would put the numeric
# keypad in Dec application mode which doesn't seem to work
# with SCO applications.
#
wy520|wyse520|wyse 520,
am, hs, km, mc5i, mir, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
vpa=\E[%i%p1%dd, use=vt220+keypad,
#
# Wyse 520 with 24 data lines and status (terminal status)
wy520-24|wyse520-24|wyse 520 with 24 data lines,
hs@,
dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
use=wy520,
#
# Wyse 520 with visual bell.
wy520-vb|wyse520-vb|wyse 520 with visible bell,
flash=\E[30h\E\,\E[30l$<100>, use=wy520,
#
# Wyse 520 in 132-column mode.
wy520-w|wyse520-w|wyse 520 in 132-column mode,
cols#132, wsl#132,
dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
#
# Wyse 520 in 132-column mode with visual bell.
wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
#
#
# Wyse 520 emulating a vt420 7 bit mode.
# The DEL key is programmed to generate BS in is2.
# With EPC keyboard.
# - 'End' key will clear till end of line on EPC keyboard
# - Shift/End : ignored.
# - Insert : enter insert mode.
# - Delete : delete a character (have to change interrupt character
# to CTRL-C: stty intr '^c') for it to work since the
# Delete key sends 7FH.
wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
use=wy520,
#
# Wyse 520 with 24 data lines and status (terminal status)
# with EPC keyboard.
wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
hs@,
dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
use=wy520-epc,
#
# Wyse 520 with visual bell.
wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
#
# Wyse 520 in 132-column mode.
wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
cols#132, wsl#132,
dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
#
# Wyse 520 in 132-column mode with visual bell.
wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
#
# Wyse 520 in 80-column, 36 lines
wy520-36|wyse520-36|wyse 520 with 36 data lines,
hs@,
lines#36,
dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
use=wy520,
#
# Wyse 520 in 80-column, 48 lines
wy520-48|wyse520-48|wyse 520 with 48 data lines,
hs@,
lines#48,
dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
use=wy520,
#
# Wyse 520 in 132-column, 36 lines
wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
use=wy520-36,
#
# Wyse 520 in 132-column, 48 lines
wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
use=wy520-48,
#
#
# Wyse 520 in 80-column, 36 lines with EPC keyboard
wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
hs@,
lines#36,
dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
use=wy520-epc,
#
# Wyse 520 in 80-column, 48 lines with EPC keyboard
wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
hs@,
lines#48,
dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
use=wy520-epc,
#
# Wyse 520 in 132-column, 36 lines with EPC keyboard
wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
use=wy520-36pc,
#
# Wyse 520 in 132-column, 48 lines with EPC keyboard
wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
use=wy520-48pc,
# From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
# file and we don't know what <hts> is -- esr)
wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
OTbs, am,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
smul=^N,
wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
use=wy75,
# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
wy100q|Wyse 100 for Quotron,
OTbs,
cols#80, lines#24, xmc#1,
cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
#### Kermit terminal emulations
#
# Obsolete Kermit versions may be listed in the section describing obsolete
# non-ANSI terminal emulators later in the file.
#
# KERMIT standard all versions.
# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
# From: greg small <gts@populi.berkeley.edu> 9-25-84
kermit|standard kermit,
OTbs,
cols#80, lines#24,
clear=\EE, cub1=^H, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
kermit-am|standard kermit plus auto-margin,
am,
is2=K1 Standard Kermit plus Automatic Margins\n,
use=kermit,
# IBMPC Kermit 1.2.
# Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
# line).
# From: greg small <gts@populi.berkeley.edu> 8-30-84
pckermit|pckermit12|UCB IBMPC Kermit 1.2,
am,
lines#25,
clear=\EH\EJ, ed@, el@,
is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
# IBMPC Kermit 1.20
# Cannot use line 25, now acts funny like ansi special scrolling region.
# Initialization must escape from that region by cursor position to line 24.
# Cannot use character insert because 1.20 goes crazy if insert at col 80.
# Does not use :am: because autowrap is lost when kermit dropped and restarted.
# From: greg small <gts@populi.berkeley.edu> 12-19-84
pckermit120|UCB IBMPC Kermit 1.20,
it#8, lines#24,
cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
il1=\EL,
is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
# MS-DOS Kermit 2.27 for the IBMPC
# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
# Cannot use line 25, now acts funny like ansi special scrolling region.
# Initialization must escape from that region by cursor position to line 24.
# Does not use am: because autowrap is lost when kermit dropped and restarted.
# Reverse video for standout like H19.
# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
# From: greg small <gts@populi.berkeley.edu> 3-17-85
msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
OTbs, am@,
cols#80, it#8, lines#24,
clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
home=\EH, ht=^I, il1=\EL,
is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
# MS-DOS Kermit 2.27 with automatic margins
# From: greg small <gts@populi.berkeley.edu> 3-17-85
msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
am,
cvvis=\EO\Eq\EG\EvK5,
is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
use=msk227,
# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
# Automatic margins now default. Use ansi <sgr> for highlights.
# Define function keys.
# (msk22714: removed obsolete ":kn#10:" -- esr)
# From: greg small <gts@populi.berkeley.edu> 3-17-85
msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
am,
bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
# This was designed for a VT320 emulator, but it is probably a good start
# at support for the VT320 itself.
# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
vt320-k3|MS-Kermit 3.00's vt320 emulation,
am, eslok, hs, km, mir, msgr, xenl,
cols#80, it#8, lines#49, pb#9600, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
vt320-k311|dec vt320 series as defined by kermit 3.11,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
######## NON-ANSI TERMINAL EMULATIONS
#
#### Avatar
#
# These entries attempt to describe Avatar, a terminal emulation used with
# MS-DOS bulletin-board systems. It was designed to give ANSI-like
# capabilities, but with cheaper (shorter) control sequences. Messy design,
# excessively dependent on PC idiosyncracies, but apparently rather popular
# in the BBS world.
#
# No color support. Avatar doesn't fit either of the Tektronix or HP color
# models that terminfo knows about. An Avatar color attribute is the
# low 7 bits of the IBM-PC display-memory attribute. Bletch.
#
# I wrote these entries while looking at the Avatar spec. I don't have
# the facilities to test them. Let me know if they work, or don't.
#
# Avatar escapes not used by these entries (because maybe you're smarter
# and more motivated than I am and can figure out how to wrap terminfo
# around some of them, and because they are weird enough to be funny):
# level 0:
# ^L -- clear window/reset current attribute to default
# ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
#
# bit: 6 5 4 3 2 1 0
# | | | | |
# +---+---+ | +---+---+
# | | |
# | | foreground color
# | foreground intensity
# background color
# level 0+:
# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
# (^V^L and ^V^M set the current attribute as a side-effect.)
# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
# in the pattern, <c> the number of times the pattern
# should be repeated. If either value is 0, no-op.
# The pattern can contain Avatar console codes,
# including other ^V ^Y patterns.
# level 1:
# ^V^O -- clockwise mode on; turn print direction right each time you
# hit a window edge (yes, really). Turned off by CR
# ^V^P -- no-op
# ^V^Q%c -- query the driver
# ^V^R -- driver reset
# ^V^S -- Sound tone (PC-specific)
# ^V^T -- change highlight at current cursor poition to %c
# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
# -- define window
#
# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
# tell ncurses that the corresponding highlights exist; it should use <sgr>,
# which is the only method that will actually work for multiple highlights.)
#
# Update by TD - 2004: half of this was inconsistent. Found documentation
# and repaired most of the damage. sgr0 is probably incorrect, but the
# available documentation gives no clues for a workable string.
avatar0|avatar terminal emulator level 0,
am, bce, msgr,
cols#80, it#8, lines#25,
blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
rmacs@, rs2=^L,
sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
use=klone+acs,
# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
avatar0+|avatar terminal emulator level 0+,
dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
avatar|avatar1|avatar terminal emulator level 1,
civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
#### RBcomm
#
# RBComm is a lean and mean terminal emulator written by the Interrupt List
# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
# '90s), especially in the BBS world, and still has some loyal users due to
# its very small memory footprint and to a cute macro language.
rbcomm|IBM PC with RBcomm and EMACS keybindings,
am, bw, mir, msgr, xenl,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^C, cuf1=^B,
cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
rbcomm-nam|IBM PC with RBcomm without autowrap,
am@,
bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
rbcomm-w|IBM PC with RBcomm in 132 column mode,
cols#132,
bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
######## LCD DISPLAYS
#
#### Matrix Orbital
# from: Eric Z. Ayers (eric@ale.org)
#
# Matrix Orbital 20x4 LCD display
# Command Character is 0xFE (decimal 254, octal 376)
#
# On this device, cursor addressability isn't possible. The LCD expects:
# 0xfe G <col> <row>
# for cup: %p1 == row and %p2 is column
#
# This line:
# cup=\376G%p2%c%p1%c
# LOOKS like it will work, but sometimes only one of the two numbers is sent.
# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
#
# Alas, there is no cursor upline capability on this display.
#
# These entries add some 'sanity stuff' to the clear function. That is, it
# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
# and turns off the cursor blinking and stuff like that.
#
# NOTE: calling 'beep' turns on the backlight (bell)
# NOTE: calling 'flash' turns it on and back off (visual bell)
#
MtxOrb|Generic Matrix Orbital LCD display,
bel=\376B^A, clear=\376X\376C\376R\376K\376T,
cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
flash=\376B\001$<200>\376F, home=\376H,
MtxOrb204|20x4 Matrix Orbital LCD display,
cols#20, lines#4, use=MtxOrb,
MtxOrb162|16x2 Matrix Orbital LCD display,
cols#16, lines#2, use=MtxOrb,
# The end
######## OLDER TERMINAL TYPES
#
# This section is devoted to older commercial terminal brands that are now
# discontinued, but known to be still in use or represented by emulations.
#
#### AT&T (att, tty)
#
# This section also includes Teletype-branded VDTs.
#
# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
# Boundless Technologies); for details, see the header comment on the ADDS
# section.
#
# These are AT&T's official terminfo entries. All-caps aliases have been
# removed.
#
att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
am, eo, mir, msgr, xon,
cols#80, it#8, lines#24,
bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
smso=\E[7m,
att2350|AT&T 2350 Video Information Terminal 80 column mode,
mc0@, mc4@, mc5@, use=att2300,
# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
# Seems upward compatible with vt100, plus ins/del line/char.
# On sgr, the protection parameter is ignored.
# No check is made to make sure that only 3 parameters are output.
# standout= reverse + half-intensity = 3 | 5.
# bold= reverse + underline = 2 | 3.
# note that half-bright blinking doesn't look different from normal blinking.
# NOTE:you must program the function keys first, label second!
# (att4410: a BSD entry has been seen with the following capabilities:
# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
am, hs, mir, msgr, xon,
cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
ll=\E[24H, nel=^M^J,
pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
tsl=\E7\E[25;%p1%{1}%+%dH,
att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
cols#132, wsl#132,
is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
OTbs,
pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
use=att5410v1,
att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
cols#132, wsl#132,
is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
# 5410 in terms of a vt100
# (v5410: added <rmam>/<smam> based on init string -- esr)
v5410|att5410 in terms of a vt100,
am, mir, msgr, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
use=vt100+fnkeys,
#
# Teletype Model 5420 -- A souped up 5410, with multiple windows,
# even! the 5420 has three modes: scroll, window or page mode
# this terminfo should work in scroll or window mode, but doesn't
# take advantage of any of the differences between them.
#
# Has memory below (2 lines!)
# 3 pages of memory (plus some spare)
# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
# <hpa>, <hts> would work for these, but these work in both scroll and window
# mode... Unset insert character so insert mode works
# <is1> sets 80 column mode,
# <is2> escape sequence:
# 1) turn off all fonts
# 2) function keys off, keyboard lock off, control display off,
# insert mode off, erasure mode off,
# 3) full duplex, monitor mode off, send graphics off, nl on lf off
# 4) reset origin mode
# 5) set line wraparound
# 6) exit erasure mode, positional attribute mode, and erasure extent mode
# 7) clear margins
# 8) program ENTER to transmit ^J,
# We use \212 to program the ^J because a bare ^J will get translated by
# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
# 1 2 3 4 5 6 7 8
# <is3> set screen color to black,
# No representation in terminfo for the delete word key: kdw1=\Ed
# Key capabilities assume the power-up send sequence...
# This <rmcup> is not strictly necessary, but it helps maximize
# memory usefulness: <rmcup=\Ez>,
# Alternate sgr0: <sgr0=\E[m\EW^O>,
# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
# smkx programs the SYS PF keys to send a set sequence.
# It also sets up labels f1, f2, ..., f8, and sends edit keys.
# This string causes them to send the strings <kf1>-<kf8>
# when pressed in SYS PF mode.
# (att4415: I added <rmam>/<smam> based on the init string -- esr)
att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
OTbs, db, mir, xon,
lh#2, lm#78, lw#8, nlab#8, wsl#55,
cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
flash=\E[?5h$<200>\E[?5l, home=\E[x,
hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
use=att4410,
att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
cols#132, lm#54, wsl#97,
is1=\E[?3h$<100>, use=att4415,
att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
cols#132, lm#54, wsl#97,
flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
use=att4415,
# Note that this mode permits programming USER PF KEYS and labels
# However, when you program user pf labels you have to reselect
# user pf keys to make them appear!
att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
use=att4415,
att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
use=att4415-rv,
att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
use=att4415-w,
att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
use=att4415-w-rv,
att5420_2|AT&T 5420 model 2 80 cols,
am, db, hs, mir, msgr, xon,
cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
invis=\E[8m,
is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
att5420_2-w|AT&T 5420 model 2 in 132 column mode,
cols#132,
is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
use=att5420_2,
att4418|att5418|AT&T 5418 80 cols,
am, xon,
cols#80, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
att4418-w|att5418-w|AT&T 5418 132 cols,
cols#132,
is1=\E[?3h, use=att5418,
att4420|tty4420|teletype 4420,
OTbs, da, db, eo, msgr, ul, xon,
cols#80, lines#24, lm#72,
bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
# The following is a terminfo entry for the Teletype 4424
# asynchronous keyboard-display terminal. It supports
# the vi editor. The terminal must be set up as follows,
#
# HIGHLIGHT DEFINITION 3-TONE
# DISPLAY FUNCTION GROUP III
#
# The second entry below provides limited (a la adm3a)
# operation under GROUP II.
#
# This must be used with DISPLAY FUNCTION GROUP I or III
# and HIGHLIGHT DEFINITION 3-TONE
# The terminal has either bold or blink, depending on options
#
# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
att4424|tty4424|teletype 4424,
OTbs, am, xon,
cols#80, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
rmul=\EZ,
sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
tbc=\EF,
att4424-1|tty4424-1|teletype 4424 in display function group I,
kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
use=att4424,
# This entry is not one of AT&T's official ones, it was translated from the
# 4.4BSD termcap file. The highlight strings are different from att4424.
# I have no idea why this is -- older firmware version, maybe?
# The following two lines are the comment originally attached to the entry:
# This entry appears to avoid the top line - I have no idea why.
# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
att4424m|tty4424m|teletype 4424M,
am, da, db, mir,
cols#80, it#8, lines#23,
bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smso=\E[7m, smul=\E[4m,
# The Teletype 5425 is really version 2 of the Teletype 5420. It
# is quite similar, except for some minor differences. No page
# mode, for example, so all of the <cup> sequences used above have
# to change back to what's being used for the 5410. Many of the
# option settings have changed their numbering as well.
#
# This has been tested on a preliminary model.
#
# (att5425: added <rmam>/<smam> based on the init string -- esr)
att5425|tty5425|att4425|AT&T 4425/5425,
am, da, db, hs, mir, msgr, xenl, xon,
cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
invis=\E[8m, is1=\E<\E[?3l$<100>,
is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
nel=^M^J,
pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
vpa=\E[%p1%{1}%+%dd,
att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
cols#132, lm#54, wsl#97,
is1=\E[?3h$<100>, use=tty5425,
# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
# I also added <rmam>/<smam> -- esr)
att4426|tty4426|teletype 4426S,
am, da, db, xon,
cols#80, lines#24, lm#48,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%p1%dd,
# Terminfo entry for the AT&T 510 A Personal Terminal
# Function keys 9 - 16 are available only after the
# screen labeled (soft keys/action blocks) are labeled. Function key
# 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
#
# This entry is based on one done by Ernie Rice at Summit, NJ and
# changed by Anne Gallup, Skokie, IL, ttrdc!anne
att510a|bct510a|AT&T 510A Personal Terminal,
am, mir, msgr, xenl, xon,
cols#80, lh#2, lines#24, lw#7, nlab#8,
acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
# Terminfo entry for the AT&T 510 D Personal Terminal
# Function keys 9 through 16 are accessed by bringing up the
# system blocks.
# Function key 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
#
# There are problems with soft key labeling. These are due to
# strangenesses in the native terminal that are impossible to
# describe in a terminfo.
att510d|bct510d|AT&T 510D Personal Terminal,
am, da, db, mir, msgr, xenl, xon,
cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
pln=\E[%p1%dp%p2%:-16s, rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
rs2=\E[5;0|, sc=\E7,
sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
att500|att513|AT&T 513 using page mode,
am, chts, mir, msgr, xenl, xon,
cols#80, lh#2, lines#24, lw#8, nlab#8,
acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
indn=\E[%p1%dE, invis=\E[8m,
is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
nel=\EE,
pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
pln=\E[%p1%dp%p2%:-16s, rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
rmul=\E[m,
rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
rs2=\E[5;0|, sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smir=\E[4h,
smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
# 01-07-88
# printer must be set to EMUL ANSI to accept ESC codes
# <cuu1> stops at top margin
# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
# and alt font ascii,wrap on,tabs cleared
# <is2> disables newline on LF,Emphasized off
# The <u0> capability sets form length
att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
xhpa, xvpa,
bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
orhi#100, orl#12, orvi#72,
cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
cr=^M,
csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
rshm=\E[m,
scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
u0=\E[%p1%dt, vpa=\E[%p1%dd,
# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
# The following SET-UP modes are assumed for normal operation:
# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
# Other SET-UP modes may be set for operator convenience or communication
# requirements. This termcap description is for the Resident Terminal Mode.
# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# The BRL entry also said: UNSAFE :ll=\E[70H:
att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
am, xon,
cols#88, it#8, lines#70, vt#3,
bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
rs1=\Ec, sc=\E7,
# 5620 terminfo (2.0 or later ROMS with char attributes)
# The following SET-UP modes are assumed for normal operation:
# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
# Other SET-UP modes may be set for operator convenience or communication
# requirements. This termcap description is for Resident Terminal Mode. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# assumptions: <ind> (scroll forward one line) is only done at screen bottom
# Be aware that older versions of the dmd have a firmware bug that affects
# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
# <msgr> is from an otherwise inferior BRL for this terminal. That entry
# also has <ll>=\E[70H commented out and marked unsafe.
# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
OTbs, am, msgr, npc, xon,
cols#88, it#8, lines#70,
bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
lines#24, use=att5620,
att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
lines#34, use=att5620,
# 5620 layer running the "S" system's downloaded graphics handler:
att5620-s|tty5620-s|layer|vitty|5620 S layer,
OTbs, OTpt, am,
cols#80, it#8, lines#72,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
kll=\E[70;1H,
# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
#
# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
att605|AT&T 605 80 column 102key keyboard,
am, eo, xon,
cols#80, lines#24, lw#8, nlab#8, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
il1=\E[L, ind=^J, invis=\E[8m,
is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
tsl=\E7\E[25;%i%p1%dx,
att605-pc|ATT 605 in pc term mode,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
xonc=e, use=att605,
att605-w|AT&T 605-w 132 column 102 key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
use=att605,
# (att610: I added <rmam>/<smam> based on the init string. I also
# added <indn> and <rin> because the BSD file says the att615s have them,
# and the 615 is like a 610 with a big keyboard, and most of their other
# smart terminals support the same sequence -- esr)
att610|AT&T 610; 80 column; 98key keyboard,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
indn=\E[%p1%dS, invis=\E[8m,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
nel=\EE,
pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
att610-w|AT&T 610; 132 column; 98key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
use=att610,
att610-103k|AT&T 610; 80 column; 103key keyboard,
kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
att610-103k-w|AT&T 610; 132 column; 103key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
use=att610-103k,
att615|AT&T 615; 80 column; 98key keyboard,
kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
att615-w|AT&T 615; 132 column; 98key keyboard,
kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
att615-103k|AT&T 615; 80 column; 103key keyboard,
kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
att615-103k-w|AT&T 615; 132 column; 103key keyboard,
kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
# (att620: I added <rmam>/<smam> based on the init string and
# <rin>/<indn> from a BSD termcap -- esr)
att620|AT&T 620; 80 column; 98key keyboard,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
indn=\E[%p1%dS, invis=\E[8m,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
rs2=\Ec\E[?3l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
tsl=\E7\E[25;%i%p1%dx,
att620-w|AT&T 620; 132 column; 98key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
use=att620,
att620-103k|AT&T 620; 80 column; 103key keyboard,
kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
att620-103k-w|AT&T 620; 132 column; 103key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
use=att620-103k,
# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
# The following SETUP modes are assumed for normal operation:
# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
# Font_Size=Large Non-Layers_Window_Cols=80
# Non-Layers_Window_Rows=60
# Other SETUP modes may be set for operator convenience or communication
# requirements. Some capabilities assume a printer attached to the Aux EIA
# port. This termcap description is for the Fixed Non-Layers Window. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
att630|AT&T 630 windowing terminal,
OTbs, am, da, db, mir, msgr, npc, xon,
cols#80, it#8, lines#60, lm#0,
bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
rmul=\E[m, rs2=\Ec, sc=\E7,
sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
lines#24, use=att630,
# This is the att700 entry for 700 native emulation of the AT&T 700
# terminal. Comments are relative to changes from the 605V2 entry and
# att730 on which the entry is based. Comments show the terminfo
# capability name, termcap name, and description.
#
# Here is what's going onm in the init string:
# ESC [ 50;4| set 700 native mode (really is 605)
# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
# ESC [ 53;0| set GenFlow to Xon/Xoff
# ESC [ 8 ;0| set CR on NL
# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
# ESC [ ? 4 l jump scroll
# ESC [ ? 5 l/h video: normal (l); reverse (h)
# ESC [ ?13 l Labels on
# ESC [ ?15 l parity check = no
# ESC [ 13 l monitor mode off
# ESC [ 20 l LF on NL (not CRLF on NL)
# ESC [ ? 7 h autowrap on
# ESC [ 12 h local echo off
# ESC ( B GO = ASCII
# ESC ) 0 G1 = Special Char & Line Drawing
# ESC [ ? 31 l Set 7 bit controls
#
# Note: Most terminals, especially the 600 family use Reverse Video for
# standout mode. DEC also uses reverse video. The VT100 uses bold in addition
# Assume we should stay with reverse video for 70.. However, the 605V2 exits
# standout mode with \E[m (all normal attributes). The 730 entry simply
# exits reverse video which would leave other current attributes intact. It
# was assumed the 730 entry to be more correct so rmso has changed. The
# 605V2 has no sequences to turn individual attributes off, thus its setting
# and the rmso/smso settings from the 730.
#
# Note: For the same reason as above in rmso I changed exit under-score mode
# to specifically turn off underscore, rather than return to all normal
# attributes
#
# Note: The following pkey_xmit is taken from the 605V2 which contained the
# capability as pfxl. It was changed here to pfx since pfxl
# will only compile successfully with Unix 4.0 tic. Also note that pfx only
# allows strings to be parameters and label values must be programmed as
# constant strings. Supposedly the pfxl of Version 4.0 allows both labels
# and strings to be parameters. The 605V2 pfx entry should be examined later
# in this regard. For reference the 730 pfxl entry is shown here for comparison
# 730 pfx entry:
# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
#
# (for 4.0 tic)
# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
#
# (for <4.0 tic)
# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
#
# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
#
# Port1 Interface
#
# modular 10 pin Connector
# Left side Right side
# Pin 1 2 3 4 5 6 7 8 9 10
#
# Key (notch) at bottom
#
# Pin 1 DSR
# 3 DCD
# 4 DTR
# 5 Sig Ground
# 6 RD
# 7 SD
# 8 CTS
# 9 RTS
# 10 Frame Ground
#
# The manual is 189 pages and is loaded with details about the escape codes,
# etc..... Available from AT&T CIC 800-432-6600...
# ask for Document number 999-300-660..
#
att700|AT&T 700 24x80 column display w/102key keyboard,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
tsl=\E7\E[99;%i%p1%dx,
# This entry was modified 3/13/90 by JWE.
# fixes include additions of <enacs>, correcting <rep>, and modification
# of <kHOM>. (See comments below)
# att730 has status line of 80 chars
# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
# the <kf25> and up keys are used for shifted system Fkeys
# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
# and 122 key keyboards, the 730's translation is \E[2J. For consistency
# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
# 102, 102+1, or 122 key keyboards
# kHOM=\E[2J,
# (att730: I added <rmam>/<smam> based on the init string -- esr)
att730|AT&T 730 windowing terminal,
am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
ind=\ED, invis=\E[8m,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
lines#41, use=att730,
att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
lines#24, use=att730,
att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
flash=\E[?5l$<200>\E[?5h,
is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
use=att730,
att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
lines#41, use=att730r,
att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
lines#24, use=att730r,
# The following represents the screen layout along with the associated
# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
# not appear on the screen but are shown to reference the bezel buttons.
# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
# position relative to the screen.
#
#
#
# +----------------------------------------------------------------+
# | |
# XXXX | kf0 kf24 | XXXX
# | |
# | |
# XXXX | kf1 kf23 | XXXX
# | |
# | |
# XXXX | kf2 kf22 | XXXX
# | |
# | |
# XXXX | kf3 kf21 | XXXX
# | |
# | |
# XXXX | kf4 kf20 | XXXX
# | |
# | |
# XXXX | kf5 kf19 | XXXX
# | |
# | |
# XXXX | kf6 kf18 | XXXX
# | |
# | |
# XXXX | | XXXX
# | |
# | |
# +----------------------------------------------------------------+
#
# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
#
# Note: XXXX represents the screen buttons
# CMD REDRAW
#
# MAIL
#
# version 1 note:
# The character string sent by key 'kf26' may be user programmable
# to send either \E[16s, or \E[26s.
# The character string sent by key 'krfr' may be user programmable
# to send either \E[17s, or \E[27s.
#
# Depression of the "CMD" key sends \E! (kcmd)
# Depression of the "MAIL" key sends \E[26s (kf26)
# "REDRAW" same as "REFRESH" (krfr)
#
# "kf" functions adds carriage return to output string if terminal is in
# 'new line' mode.
#
# The following are functions not covered in the table above:
#
# Set keyboard character (SKC): \EPn1;Pn2w
# Pn1= 0 Back Space key
# Pn1= 1 Break key
# Pn2= Program char (hex)
#
# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
# Pn1= Window number (1-39)
# Pn2-Pn5= Y;X;Y;X coordinates
#
# Screen Selection (SSL): \E[Pnu
# Pn= Window number
#
# Set Terminal Modes (SM): \E[Pnh
# Pn= 3 Graphics mode
# Pn= > Cursor blink
# Pn= < Enter new line mode
# Pn= = Enter reverse insert/replace mode
# Pn= ? Enter no scroll mode
#
# Reset Terminal Mode (RM): \E[Pnl
# Pn= 3 Exit graphics mode
# Pn= > Exit cursor blink
# Pn= < Exit new line mode
# Pn= = Exit reverse insert/replace mode
# Pn= ? Exit no scroll mode
#
# Screen Status Report (SSR): \E[Pnp
# Pn= 0 Request current window number
# Pn= 1 Request current window dimensions
#
# Device Status Report (DSR): \E[6n Request cursor position
#
# Call Status Report (CSR): \E[Pnv
# Pn= 0 Call failed
# Pn= 1 Call successful
#
# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
# Pn1= Button number to be loaded
# Pn2= Character count of "string"
# Pn3= Key mode being loaded:
# 0= Unshifted
# 1= Shifted
# 2= Control
# String= Text string (15 chars max)
#
# Screen Number Report (SNR): \E[Pnp
# Pn= Screen number
#
# Screen Dimension Report (SDR): \E[Pn1;Pn2r
# Pn1= Number of rows available in window
# Pn2= Number of columns available in window
#
# Cursor Position Report (CPR): \E[Pn1;Pn2R
# Pn1= "Y" Position of cursor
# Pn2= "X" Position of cursor
#
# Request Answer Back (RAB): \E[c
#
# Answer Back Response (ABR): \E[?;*;30;VSV
# *= 0 No printer available
# *= 2 Printer available
# V= Software version number
# SV= Software sub version number
# (printer-available field not documented in v1)
#
# Screen Alignment Aid: \En
#
# Bell (lower pitch): \E[x
#
# Dial Phone Number: \EPdstring\
# string= Phone number to be dialed
#
# Set Phone Labels: \EPpstring\
# string= Label for phone buttons
#
# Set Clock: \EPchour;minute;second\
#
# Position Clock: \EPsY;X\
# Y= "Y" coordinate
# X= "X" coordinate
#
# Delete Clock: \Epr\
#
# Programming The Function Buttons: \EPfPn;string\
# Pn= Button number (00-06, 18-24)
# (kf00-kf06, kf18-kf24)
# string= Text to sent on button depression
#
# The following in version 2 only:
#
# Request For Local Directory Data: \EPp12;\
#
# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
#
# Request for Local Directory Data in print format: \EPp13;\
#
# Enable 'Prt on Line' mode: \022 (DC2)
#
# Disable 'Prt on Line' mode: \024 (DC4)
#
# 05-Aug-86:
# The following Terminfo entry describes functions which are supported by
# the AT&T 5430/pt505 terminal software version 2 and later.
att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
am, xon,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
# The following Terminfo entry describes functions which are supported by
# the AT&T 5430/pt505 terminal software version 1.
att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
lines#24,
mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
lines#22, use=att505,
#
#### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
# This cut mark helps make life less painful for people running ncurses tic
# on machines with relatively little RAM. The file can be broken in half here
# cleanly and compiled in sections -- no `use' references cross this cut
# going forward.
#
#### Ampex (Dialogue)
#
# Yes, these are the same people who are better-known for making audio- and
# videotape. I'm told they are located in Redwood City, CA.
#
# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
# (ampex80: some capabilities merged in from SCO's entry -- esr)
ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
OTbs, am, bw, ul,
cols#80, it#8, lines#24,
bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
smso=\Ej, smul=\El, tbc=\E3,
# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
ampex175|ampex d175,
am,
cols#80, lines#24,
bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
# No backspace key in the main QWERTY cluster. Fortunately, it has a
# NEWLINE/PAGE key just above RETURN that sends a strange single-character
# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
# mode), this key can be used as the erase key; I find I like this. Because
# some people and some systems may not, there is another termcap ("ampex175")
# that suppresses this little eccentricity by omitting the relevant capability.
ampex175-b|ampex d175 using left arrow for erase,
kbs=^_, use=ampex175,
# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
# (ampex210: removed obsolete ":kn#10:" -- esr)
ampex210|a210|ampex a210,
OTbs, am, hs, xenl,
cols#80, it#8, lines#24, xmc#1,
cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
if=/usr/share/tabset/std, il1=\EE, invis@,
is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
# and moved the padding to be *after* the caps -- esr)
ampex219|ampex-219|amp219|Ampex with Automargins,
hs, xenl,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
ampex219w|ampex-219w|amp219w|Ampex 132 cols,
cols#132, lines#24,
bel=^G, cr=^M, cud1=^J, ind=^J,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
ampex232|ampex-232|Ampex Model 232,
am,
cols#80, lines#24, xmc#1,
cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
kf9=^AI\r, khome=^^, use=adm+sgr,
# (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
ampex232w|Ampex Model 232 / 132 columns,
cols#132, lines#24,
is2=\E\034Eg\El, use=ampex232,
#### Ann Arbor (aa)
#
# Ann Arbor made dream terminals for hackers -- large screen sizes and huge
# numbers of function keys. At least some used monitors in portrait mode,
# allowing up to 76-character screen heights! They were reachable at:
#
# Ann Arbor Terminals
# 6175 Jackson Road
# Ann Arbor, MI 48103
# (313)-663-8000
#
# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
# can't be found on the Web; I fear they're long dead. R.I.P.
#
# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
# Highly modified 6/22 by Mike O'Brien.
# split out into several for the various screen sizes by dave-yost@rand
# Modifications made 3/82 by Mark Horton
# Modified by Tom Quarles at UCB for greater efficiency and more diversity
# status line moved to top of screen, <flash> removed 5/82
# Some unknown person at SCO then hacked the init strings to make them more
# efficient.
#
# assumes the following setup:
# A menu: 0000 1010 0001 0000
# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
# C menu: 56 66 0 0 9600 0110 1100
# D menu: 0110 1001 1 0
#
# Briefly, the settings are for the following modes:
# (values are for bit set/clear with * indicating our preference
# and the value used to test these termcaps)
# Note that many of these settings are irrelevent to the terminfo
# and are just set to the default mode of the terminal as shipped
# by the factory.
#
# A menu: 0000 1010 0001 0000
# Block/underline cursor*
# blinking/nonblinking cursor*
# key click/no key click*
# bell/no bell at column 72*
#
# key pad is cursor control*/key pad is numeric
# return and line feed/return for <cr> key *
# repeat after .5 sec*/no repeat
# repeat at 25/15 chars per sec. *
#
# hold data until pause pressed/process data unless pause pressed*
# slow scroll/no slow scroll*
# Hold in area/don't hold in area*
# functions keys have default*/function keys disabled on powerup
#
# show/don't show position of cursor during page transmit*
# unused
# unused
# unused
#
# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
# Baud rate (9600*)
#
# 2 bits of parity - 00=odd,01=even*,10=space,11=mark
# 1 stop bit*/2 stop bits
# parity error detection off*/on
#
# keyboard local/on line*
# half/full duplex*
# disable/do not disable keyboard after data transmission*
#
# transmit entire page/stop transmission at cursor*
# transfer/do not transfer protected characters*
# transmit all characters/transmit only selected characters*
# transmit all selected areas/transmit only 1 selected area*
#
# transmit/do not transmit line separators to host*
# transmit/do not transmit page tab stops tabs to host*
# transmit/do not transmit column tab stop tabs to host*
# transmit/do not transmit graphics control (underline,inverse..)*
#
# enable*/disable auto XON/XOFF control
# require/do not require receipt of a DC1 from host after each LF*
# pause key acts as a meta key/pause key is pause*
# unused
#
# unused
# unused
# unused
# unused
#
# XON character (17*)
# XOFF character (19*)
#
# C menu: 56 66 0 0 9600 0110 1100
# number of lines to print data on (printer) (56*)
#
# number of lines on a sheet of paper (printer) (66*)
#
# left margin (printer) (0*)
#
# number of pad chars on new line to printer (0*)
#
# printer baud rate (9600*)
#
# printer parity: 00=odd,01=even*,10=space,11=mark
# printer stop bits: 2*/1
# print/do not print guarded areas*
#
# new line is: 01=LF,10=CR,11=CRLF*
# unused
# unused
#
# D menu: 0110 1001 1 0
# LF is newline/LF is down one line, same column*
# wrap to preceding line if move left from col 1*/don't wrap
# wrap to next line if move right from col 80*/don't wrap
# backspace is/is not destructive*
#
# display*/ignore DEL character
# display will not/will scroll*
# page/column tab stops*
# erase everything*/erase unprotected only
#
# editing extent: 0=display,1=line*,2=field,3=area
#
# unused
#
annarbor4080|aa4080|ann arbor 4080,
OTbs, am,
cols#80, lines#40,
bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
# Strange Ann Arbor terminal from BRL
aas1901|Ann Arbor K4080 w/S1901 mod,
am,
cols#80, lines#40,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
nel=^M^J,
# If you're using the GNU termcap library, add
# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
# to these capabilities. This is the nonstandard GNU termcap scrolling
# capability, arguments are:
# 1. Total number of lines on the screen.
# 2. Number of lines above desired scroll region.
# 3. Number of lines below (outside of) desired scroll region.
# 4. Total number of lines on the screen, the same as the first parameter.
# The generic Ann Arbor entry is the only one that uses this.
aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
OTbs, am, km, mc5i, mir, xon,
cols#80, it#8,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
sgr0=\E[m,
smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
vpa=\E[%p1%{1}%+%dd,
aaa+rv|ann arbor ambassador in reverse video,
blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
rs1=\E[H\E[7m\E[J$<156>,
sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
# Ambassador with the DEC option, for partial vt100 compatibility.
aaa+dec|ann arbor ambassador in dec vt100 mode,
acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
smacs=^O,
aaa-18|ann arbor ambassador/18 lines,
lines#18,
is2=\E7\E[60;0;0;18p\E8,
rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
use=aaa+unk,
aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
use=aaa+rv, use=aaa-18,
aaa-20|ann arbor ambassador/20 lines,
lines#20,
is2=\E7\E[60;0;0;20p\E8,
rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
use=aaa+unk,
aaa-22|ann arbor ambassador/22 lines,
lines#22,
is2=\E7\E[60;0;0;22p\E8,
rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
use=aaa+unk,
aaa-24|ann arbor ambassador/24 lines,
lines#24,
is2=\E7\E[60;0;0;24p\E8,
rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
use=aaa+unk,
aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
use=aaa+rv, use=aaa-24,
aaa-26|ann arbor ambassador/26 lines,
lines#26,
is2=\E7\E[60;0;0;26p\E8,
rmcup=\E[60;0;0;26p\E[26;1H\E[K,
smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
aaa-28|ann arbor ambassador/28 lines,
lines#28,
is2=\E7\E[60;0;0;28p\E8,
rmcup=\E[60;0;0;28p\E[28;1H\E[K,
smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
eslok, hs,
lines#29,
dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
rmcup=\E[60;1;0;30p\E[29;1H\E[K,
smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
use=aaa+rv, use=aaa-30-s,
aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
rmcup=\E[60;1;0;30p\E[59;1H\E[K,
smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
rmcup=\E[60;1;0;30p\E[59;1H\E[K,
smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
lines#30,
is2=\E7\E[60;0;0;30p\E8,
rmcup=\E[60;0;0;30p\E[30;1H\E[K,
smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
use=aaa+rv, use=aaa-30,
aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
use=aaa-30,
aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
use=aaa+rv, use=aaa-30,
aaa-36|ann arbor ambassador/36 lines,
lines#36,
is2=\E7\E[60;0;0;36p\E8,
rmcup=\E[60;0;0;36p\E[36;1H\E[K,
smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
use=aaa+rv, use=aaa-36,
aaa-40|ann arbor ambassador/40 lines,
lines#40,
is2=\E7\E[60;0;0;40p\E8,
rmcup=\E[60;0;0;40p\E[40;1H\E[K,
smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
use=aaa+rv, use=aaa-40,
aaa-48|ann arbor ambassador/48 lines,
lines#48,
is2=\E7\E[60;0;0;48p\E8,
rmcup=\E[60;0;0;48p\E[48;1H\E[K,
smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
use=aaa+rv, use=aaa-48,
aaa-60-s|ann arbor ambassador/59 lines+status,
eslok, hs,
lines#59,
dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
use=aaa+rv, use=aaa-60-s,
aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
use=aaa+dec, use=aaa+rv, use=aaa-60-s,
aaa-60|ann arbor ambassador/60 lines,
lines#60,
is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
use=aaa+unk,
aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
use=aaa+rv, use=aaa-60,
aaa-db|ann arbor ambassador 30/destructive backspace,
OTbs@,
cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
lines#33,
flash=\E[>59h$<100>\E[>59l,
is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
guru+rv|guru changes for reverse video,
flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
use=guru+rv, use=guru-33,
guru+s|guru status line,
eslok, hs,
dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
tsl=\E[>51h\E[1;%p1%dH\E[2K,
guru-nctxt|guru with no saved context,
smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
guru-s|guru-33-s|ann arbor guru/33 lines+status,
lines#32,
is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
guru-24|ann arbor guru 24 lines,
cols#80, lines#24,
is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
use=guru+unk,
guru-44|ann arbor guru 44 lines,
cols#97, lines#44,
is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
use=guru+unk,
guru-44-s|ann arbor guru/44 lines+status,
lines#43,
is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
guru-76|guru with 76 lines by 89 cols,
cols#89, lines#76,
is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
use=guru+unk,
guru-76-s|ann arbor guru/76 lines+status,
cols#89, lines#75,
is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
guru-76-lp|guru-lp|guru with page bigger than line printer,
cols#134, lines#76,
is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
use=guru+unk,
guru-76-w|guru 76 lines by 178 cols,
cols#178, lines#76,
is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
use=guru+unk,
guru-76-w-s|ann arbor guru/76 lines+status+wide,
cols#178, lines#75,
is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
cols#178, lines#76,
is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
use=guru+unk,
aaa-rv-unk|ann arbor unknown type,
lh#0, lw#0, nlab#0,
blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
rs1=\E[H\E[7m\E[J,
sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
#### Applied Digital Data Systems (adds)
#
# ADDS itself is long gone. ADDS was bought by NCR, and the same group made
# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
# terminals was merged again. Then AT&T sold the terminal business to
# SunRiver, which later changed its name to Boundless Technologies. The
# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
# as of early 1995) are at:
#
# Boundless Technologies
# 100 Marcus Boulevard
# Hauppauge, NY 11788-3762
# Vox: (800)-231-5445
# Fax: (516)-342-7378
# Web: http://boundless.com
#
# Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
# In 1995 Boundless acquired DEC's terminals business.
#
# Regent: lowest common denominator, works on all regents.
# (regent: renamed ":bc:" to ":le:" -- esr)
regent|Adds Regent Series,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
home=\EY\s\s, ind=^J, ll=^A,
# Regent 100 has a bug where if computer sends escape when user is holding
# down shift key it gets confused, so we avoid escape.
regent100|Adds Regent 100,
xmc#1,
bel=^G,
cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
regent20|Adds Regent 20,
bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
use=regent,
regent25|Adds Regent 25,
bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
use=regent20,
regent40|Adds Regent 40,
xmc#1,
bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
smul=\E0`, use=regent25,
regent40+|Adds Regent 40+,
is2=\EB, use=regent40,
regent60|regent200|Adds Regent 60,
dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
use=regent40+,
# From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
# (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
viewpoint|addsviewpoint|adds viewpoint,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
# Some viewpoints have bad ROMs that foo up on ^O
screwpoint|adds viewpoint with ^O bug,
cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
# The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
# underline=01100000, rev=01010000, blink=01000010,dim=01000001,
# invis=01000100 and %c is the logical or of desired attributes.
# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
#
# Update by TD - 2004:
# Adapted from
# http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
#
# COMMANDS ASCII CODE
#
# Address, Absolute ESC,=,row,column
# Beep BEL
# Aux Port Enable ESC,@
# Aux Port Disable ESC,A
# Backspace BS
# Cursor back BS
# Cursor down LF
# Cursor forward FF
# Cursor home RS
# Cursor up VT
# Cursor supress ETB
# Cursor enable CAN
# Erase to end of line ESC,T
# Erase to end of page ESC,Y
# Erase screen SUB
# Keyboard lock SI
# Keyboard unlock SO
# Read current cursor position ESC,?
# Set Attribute ESC,0,x (see below for values of x)
# Tag bit reset ESC,(
# Tag bit set ESC,)
# Transparent Print on ESC,3
# Transparent Print off ESC,4
#
#
# ATTRIBUTES
#
# Normal @ 0100
# Half Intensity A 0101
# Blinking B 0102
# Half Intensity Blinking C 0103
# Reverse Video P 0120
# Reverse Video Half Intensity Q 0121
# Reverse Video Blinking R 0122
# Reverse Video Half Intensity
# Blinking S 0123
# Underlined ` 0140
# Underlined Half Intensity a 0141
# Underlined Blinking b 0142
# Underlined Half Intensity
# Blinking c 0143
# Video suppress D 0104
vp3a+|viewpoint3a+|adds viewpoint 3a+,
am, bw,
cols#80, it#8, lines#24,
blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
nel=^M^J, rev=\E0P\E), rmso=\E(,
sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
vp60|viewpoint60|addsvp60|adds viewpoint60,
use=regent40,
#
# adds viewpoint 90 - from cornell
# Note: emacs sends ei occasionally to insure the terminal is out of
# insert mode. This unfortunately puts the viewpoint90 IN insert
# mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
# - :ei=:im=: must be present in the termcap translation.)
# - <xhp> indicates glitch that attributes stick to location
# - <msgr> means it's safe to move in standout mode
# - <clear=\EG\Ek>: clears screen and visual attributes without affecting
# the status line
# Function key and label capabilities merged in from SCO.
vp90|viewpoint90|adds viewpoint 90,
OTbs, bw, msgr, xhp,
cols#80, lines#24,
clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
# Note: if return acts weird on a980, check internal switch #2
# on the top chip on the CONTROL pc board.
adds980|a980|adds consul 980,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
#### C. Itoh Electronics
#
# As of 1995 these people no longer make terminals (they're still in the
# printer business). Their terminals were all clones of the DEC VT series.
# They're located in Orange County, CA.
#
# CIT 80 - vt-52 emulator, the termcap has been modified to remove
# the delay times and do an auto tab set rather than the indirect
# file used in vt100.
cit80|cit-80|citoh 80,
OTbs, am,
cols#80, lines#24,
clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
cit101|citc|C.itoh fast vt100,
OTbs, am, xenl,
cols#80, lines#24,
bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U,
dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m,
# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
# The following termcap entry was created from the Callan cd100 entry. The
# last two lines (with the capabilities in caps) are used by RM-cobol to allow
# full selection of combinations of reverse video, underline, and blink.
# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
cit101e|C. Itoh CIT-101e,
OTbs, OTpt, am, mir, msgr,
cols#80, it#8, lines#24,
acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J,
el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
smkx=\E=, smso=\E[7m, smul=\E[4m,
# From: David S. Lawyer, June 1997:
# The CIT 101-e was made in Japan in 1983-4 and imported by CIE
# Terminals in Irvine, CA. It was part of CITOH Electronics. In the
# late 1980's CIT Terminals went out of business.
# There is no need to use the initialization string is=... (by invoking
# tset or setterm etc.) provided that the terminal has been manually set
# up (and the setup saved with ^S) to be compatible with this termcap. To be
# compatible it should be in ANSI mode (not VT52). A set-up that
# works is to set all the manually setable stuff to factory defaults
# by pressing ^D in set-up mode. Then increse the brighness with the
# up-arrow key since the factory default will likely be dim on an old
# terminal. Then change any options you want (provided that they are
# compatible with the termcap). For my terminal I set: Screen
# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
# on. I also set up mine for parity (but you may not need it). Then
# save the setup with ^S.
# (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
cit101e-rv|Citoh CIT-101e (sets reverse video),
am, eo, mir, msgr, xenl, xon,
cols#80, it#8, lines#24,
OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
u7=\E[6n, u8=\E[?6c, u9=\E[c,
cit101e-n|CIT-101e w/o am,
am@,
cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
use=cit101e,
cit101e-132|CIT-101e with 132 cols,
cols#132,
kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
cit101e-n132|CIT-101e with 132 cols w/o am,
am@,
cols#132,
cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
use=cit101e,
# CIE Terminals CIT-500 from BRL
# The following SET-UP modes are assumed for normal operation:
# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
# Other SET-UP modes may be set for operator convenience or communication
# requirements.
# Hardware tabs are assumed to be set every 8 columns; they can be set up
# by the "reset", "tset", or "tabs" utilities. No delays are specified; use
# "stty ixon -ixany" to enable DC3/DC1 flow control!
# (cit500: I added <rmam>/<smam> based on the init string -- esr)
cit500|CIE Terminals CIT-500,
OTbs, OTpt, mir, msgr, xon,
OTkn#10, cols#80, it#8, lines#64, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
rmso=\E[m, rmul=\E[m,
rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# C. Itoh printers begin here
citoh|ci8510|8510|c.itoh 8510a,
cols#80, it#8,
bold=\E!, cub1@,
is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
smul=\EX, use=lpr,
citoh-pica|citoh in pica,
is1=\EN, use=citoh,
citoh-elite|citoh in elite,
cols#96,
is1=\EE,
is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
use=citoh,
citoh-comp|citoh in compressed,
cols#136,
is1=\EQ,
is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
use=citoh,
# citoh has infinite cols because we don't want lp ever inserting \n\t**.
citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
cols#32767,
is1=\EP, use=citoh,
citoh-6lpi|citoh in 6 lines per inch mode,
is3=\EA, use=citoh,
citoh-8lpi|citoh in 8 lines per inch mode,
lines#88,
is3=\EB, use=citoh,
#### Control Data (cdc)
#
cdc456|cdc 456 terminal,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
el=^V, home=^Y, il1=\EL, ind=^J,
# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
cdc721|CDC Viking,
OTbs, am,
cols#80, lines#24,
clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
kcuu1=^W, khome=^Y,
cdc721ll|CDC Vikingll,
OTbs, am,
cols#132, lines#24,
clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
kcuu1=^W, khome=^Y,
# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
cdc752|CDC 752,
OTbs, am, bw, xhp,
cols#80, lines#24,
bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
# CDC 756
# The following switch/key settings are assumed for normal operation:
# 96 chars SCROLL FULL duplex not BLOCK
# Other switches may be set according to communication requirements.
# Insert/delete-character cannot be used, as the whole display is affected.
# "so" & "se" are commented out until jove handles "sg" correctly.
cdc756|CDC 756,
OTbs, am, bw,
OTkn#10, cols#80, lines#24,
bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
rs1=\031\030\002\003\017,
#
# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
#
# Part of the long initialization string defines the "DOWN" key to the left
# of the tab key to send an ESC. The real ESC key is positioned way out
# in right field.
#
# The termcap won't work in 132 column mode due to the way it it moves the
# cursor. Termcap doesn't have the capability (as far as I could tell) to
# handle the 721 in 132 column mode.
#
# (cdc721: changed :ri: to :sr: -- esr)
cdc721-esc|Control Data 721,
OTbs, OTpt, am, bw, msgr, xon,
OTkn#10, cols#80, it#8, lines#30,
bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
smso=^^D, smul=^\, tbc=^^^RY,
#### Getronics
#
# Getronics is a Dutch electronics company that at one time was called
# `Geveke' and made async terminals; but (according to the company itself!)
# they've lost all their documentation on the command set. The hardware
# documentation suggests the terminals were actually manufactured by a
# Taiwanese electronics company named Cal-Comp. There are known
# to have been at least two models, the 33 and the 50.
#
# The 50 seems to be a top end vt220 clone, with the addition of a higher
# screen resolution, a larger screen, at least 1 page of memory above and
# below the screen, apparently pages of memory right and left of the screen
# which can be panned, and about 75 function keys (15 function keys x normal,
# shift, control, func A, func B). It also has more setup possibilities than
# the vt220. The monitor case is dated November 1978 and the keyboard case is
# May 1982.
#
# The vt100 emulation works as is. The entry below describes the rather
# non-conformant (but more featureful) ANSI mode.
#
# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
visa50|geveke visa 50 terminal in ansi 80 character mode,
bw, mir, msgr,
cols#80, lines#25,
acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
lf3=A insert line, lf4=A delete line, lf5=A clear,
lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%i%p1%dd,
#### Human Designed Systems (Concept)
#
# Human Designed Systems
# 400 Fehley Drive
# King of Prussia, PA 19406
# Vox: (610)-277-8300
# Fax: (610)-275-5739
# Net: support@hds.com
#
# John Martin <john@hds.com> is their termcap expert. They're mostly out of
# the character-terminal business now (1995) and making X terminals. In
# particular, the whole `Concept' line described here was discontinued long
# ago.
#
# From: <vax135!hpk> Sat Jun 27 07:41:20 1981
# Extensive changes to c108 by arpavax:eric Feb 1982
# Some unknown person at SCO then translated it to terminfo.
#
# There seem to be a number of different versions of the C108 PROMS
# (with bug fixes in its Z-80 program).
#
# The first one that we had would lock out the keyboard of you
# sent lots of short lines (like /usr/dict/words) at 9600 baud.
# Try that on your C108 and see if it sends a ^S when you type it.
# If so, you have an old version of the PROMs.
#
# You should configure the C108 to send ^S/^Q before running this.
# It is much faster (at 9600 baud) than the c100 because the delays
# are not fixed.
# new status line display entries for c108-8p:
# <is3> - init str #3 - setup term for status display -
# set programmer mode, select window 2, define window at last
# line of memory, set bkgnd stat mesg there, select window 0.
#
# <tsl> - to status line - select window 2, home cursor, erase to
# end-of-window, 1/2 bright on, goto(line#0, col#?)
#
# <fsl> - from status line - 1/2 bright off, select window 0
#
# <dsl> - disable status display - set bkgnd status mesg with
# illegal window #
#
# There are probably more function keys that should be added but
# I don't know what they are.
#
# No delays needed on c108 because of ^S/^Q handshaking
#
c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
c108-4p|concept108-4p|concept 108 w/4 pages,
OTbs, eslok, hs, xon,
pb@,
acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
ind=^J, is1=\EK\E!\E F,
is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
smcup=\EU\Ev 8p\Ep\r\E\025,
tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
use=c108-rv-4p,
c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
use=c108-4p,
c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
cols#132,
is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
# Concept 100:
# These have only window relative cursor addressing, not screen
# relative. To get it to work right here, smcup/rmcup (which
# were invented for the concept) lock you into a one page
# window for screen style programs.
#
# To get out of the one page window, we use a clever trick:
# we set the window size to zero ("\Ev " in rmcup) which the
# terminal recognizes as an error and resets the window to all
# of memory.
#
# This trick works on c100 but does not on c108, sigh.
#
# Some tty drivers use cr3 for concept, others use nl3, hence
# the delays on cr and ind below. This padding is only needed at
# 9600 baud and up. One or the other is commented out depending on
# local conventions.
#
# 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
# less than 6 but more than 2 will work.
#
# Note: can't use function keys f7-f10 because they are
# indistinguishable from arrow keys (!), also, del char and
# clear eol use xon/xoff so they probably won't work very well.
#
# Also note that we don't define insrt/del char/delline/eop/send
# because they don't transmit unless we reset them - I figured
# it was a bad idea to clobber their definitions.
#
# The <mc5> sequence changes the escape character to ^^ so that
# escapes will be passed through to the printer. Only trouble
# is that ^^ won't be - ^^ was chosen to be unlikely.
# Unfortunately, if you're sending raster bits through to be
# plotted, any character you choose will be likely, so we lose.
#
# \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
# cannot be # in is2 because it will hang a c100 with no printer
# if sent twice.
c100|concept100|concept|c104|c100-4p|hds concept 100,
OTbs, am, eo, mir, ul, xenl,
cols#80, lines#24, pb#9600, vt#8,
bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
cub1=^H, cud1=^J, cuf1=\E=,
cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
is1=\EK,
is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
rmso=\Ed, rmul=\Eg, sgr0=\EN@,
smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
smso=\ED, smul=\EG,
c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
smso=\EE, use=c100,
oc100|oconcept|c100-1p|old 1 page concept 100,
in,
is3@, use=c100,
# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
# Lots of notes, originally inline, but ncurses doesn't grok that.
#
# am: not available in power on mode, but turned on with \E[=107;207h in
# is2=. Also, \E=124l in is2= could have been used to prevent needing
# to specify xenl:, but that would have rendered the last space on the
# last line useless.
# bw: Not available in power on mode, but turned on with \E[=107;207h in
# is2=.
# clear: Could be done with \E[2J alone, except that vi (and probably most
# other programs) assume that this also homes the cursor.
# dsl: Go to window 2, go to the beginning of the line, use a line feed to
# scroll the window, and go back to window 1.
# is2: the string may cause a warning to be issued by tic that it
# found a very long line and that it suspects that a comma is missing
# somewhere. This warning can be ignored (unless it comes up more than
# once). The initialization string contains the following commands:
#
# [Setup mode items changed from factory defaults:]
# \E)0 set alternate character set to
# graphics
# ^O set character set to default
# [In case it wasn't]
# \E[m turn off all attributes
# [In case they weren't off]
# \E[=107; cursor wrap and
# 207h character wrap on
# \E[90;3u set Fkey definitions to "transmit"
# defaults
# \E[92;3u set cursor key definitions to
# "transmit" defaults
# \E[43;1u set shift F13 to transmit...
# \177\E$P\177
# \E[44;1u set shift F14 to transmit...
# \177\E$Q\177
# \E[45;1u set shift F15 to transmit...
# \177\E$R\177
# \E[46;1u set shift F16 to transmit...
# \177\E$S\177
# \E[200;1u set shift up to transmit...
# \177\E$A\177
# \E[201;1u set shift down to transmit...
# \177\E$B\177
# \E[202;1u set shift right to transmit...
# \177\E$C\177
# \E[203;1u set shift left to transmit...
# \177\E$D\177
# \E[204;1u set shift home to transmit...
# \177\E$H\177
# \E[212;1u set backtab to transmit...
# \177\E$I\177
# \E[213;1u set shift backspace to transmit...
# \177\E$^H\177
# \E[214;1u set shift del to transmit...
# "\E$\177"
# [Necessary items not mentioned in setup mode:]
# \E[2!w move to window 2
# \E[25;25w define window as line 25 of memory
# \E[!w move to window 1
# \E[2*w show current line of window 2 as
# status line
# \E[2+x set meta key to use high bit
# \E[;3+} move underline to bottom of character
#
# All Fkeys are set to their default transmit definitions with \E[90;3u
# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
# setting MUST be redefined or deactivated, because the default is
# contained in almost all of this terminal's Fkey strings! If for some
# reason "quit" cannot be altered, the Fkeys can, but it would be
# necessary to change ^| to ^] in all of these definitions, and add
# \E[2;029!t to is2.
# lines: is set to 24 because this terminal refuses to treat the 25th
# line normally.
# ll: Not available in power on mode, but turned on with \E[=107;207h in
# is2=.
# lm: Pointless, given that this definition locks a single screen of
# memory into view, but what the hey...
# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
# other attributes alone), but some programs expect this to turn off
# everything.
# rmul: Could use \E[4!{ to turn off only underline (leaving any other
# attributes alone), but some programs expect this to turn off
# everything.
# sgr: Attributes are set on this terminal with the string \E[ followed by
# a list of attribute code numbers (in decimal, separated by
# semicolons), followed by the character m. The attribute code
# numbers are:
# 1 for bold;
# 2 for dim (which is ignored in power on mode);
# 4 for underline;
# 5 for blinking;
# 7 for inverse;
# 8 for not displayable; and
# =99 for protected (except that there are strange side
# effects to protected characters which make them inadvisable).
# The mapping of terminfo parameters to attributes is as follows:
# %p1 (standout) = bold and inverse together;
# %p2 (underline) = underline;
# %p3 (reverse) = inverse;
# %p4 (blink) = blinking;
# %p5 (dim) is ignored;
# %p6 (bold) = bold;
# %p7 (invisible) = not displayable;
# %p8 (protected) is ignored; and
# %p9 (alt char set) = alt char set.
# The code to do this is:
# \E[0 OUTPUT \E[0
# %?%p1%p6%O IF (standout; bold) OR
# %t;1 THEN OUTPUT ;1
# %; ENDIF
# %?%p2 IF underline
# %t;4 THEN OUTPUT ;4
# %; ENDIF
# %?%p4 IF blink
# %t;5 THEN OUTPUT ;5
# %; ENDIF
# %?%p1%p3%O IF (standout; reverse) OR
# %t;7 THEN OUTPUT ;7
# %; ENDIF
# %?%p7 IF invisible
# %t;8 THEN OUTPUT ;8
# %; ENDIF
# m OUTPUT m
# %?%p9 IF altcharset
# %t^N THEN OUTPUT ^N
# %e^O ELSE OUTPUT ^O
# %; ENDIF
# sgr0: Everything is turned off (including alternate character set), since
# there is no way of knowing what it is that the program wants turned
# off.
# smul: The "underline" attribute is reconfigurable to an overline or
# strikethru, or (as done with \E[;3+} in is2=), to a line at the true
# bottom of the character cell. This was done to allow for more readable
# underlined characters, and to be able to distinguish between an
# underlined space, an underscore, and an underlined underscore.
# xenl: Terminal can be configured to not need this, but this "glitch"
# behavior is actually preferable with autowrap terminals.
#
# Parameters kf31= thru kf53= actually contain the strings sent by the shifted
# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
# string modifies the 'O' in kf43 to kf46 to a '$'.
#
# kcbt was originally ^I but redefined in is2=.
# kHOM was \E[H originally but redefined in is2=, as were a number of
# other keys.
# kDC was originally \177 but redefined in is2=.
#
# kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
# tsl: Go to window 2, then do an hpa=.
#
#------- flash=\E[8;3!}^G\E[3;3!}
#------- flash=\E[?5h$<100>\E[?5l
# There are two ways to flash the screen, both of which have their drawbacks.
# The first is to set the bell mode to video, transmit a bell character, and
# set the bell mode back - but to what? There is no way of knowing what the
# user's old bell setting was before we messed with it. Worse, the command to
# set the bell mode also sets the key click volume, and there is no way to say
# "leave that alone", or to know what it's set to, either.
# The second way to do a flash is to set the screen to inverse video, pad for a
# tenth of a second, and set it back - but like before, there's no way to know
# that the screen wasn't ALREADY in inverse video, or that the user may prefer
# it that way. The point is moot anyway, since vi (and probably other
# programs) assume that by defining flash=, you want the computer to use it
# INSTEAD of bel=, rather than as a secondary type of signal.
#
#------- cvvis=\E[+{
# The is the power on setting, which is also as visible as the cursor
# gets.
#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
# Windowing is possible, but not defined here because it is also used to
# emulate status line functions. Allowing a program to set a window could
# clobber the status line or render it unusable. There is additional memory,
# but screen scroll functions are destructive and do not make use of it.
#
#------- dim= Not available in power on mode.
# You have a choice of defining low intensity characters as "half bright" and
# high intensity as "normal", or defining low as "normal" and high as "bold".
# No matter which you choose, only one of either "half bright" or "bold" is
# available at any time, so taking the time to override the default is
# pointless.
#
#------- prot=\E[=0;99m
# Not defined, because it appears to have some strange side effects.
#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
# Available, but making them available to programs is inadvisable.
# The code to do this is:
# %?%p1%{24}%< IF ((key; 24) <;
# %p1%{30}%> ((key; 30) >;
# %p1%{54}%< (key; 54) <
# %A ) AND
# %O ) OR
# [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
# %t\E[ THEN OUTPUT \E[
# %p1%d OUTPUT (key) as decimal
# [next line applies to pfx only]
# ;1 OUTPUT ;1
# u OUTPUT u
# \177 OUTPUT \177
# %p2%s OUTPUT (string) as string
# \177 OUTPUT \177
# [DEL chosen as delimiter, but could be any character]
# [implied: ELSE do nothing]
# %; ENDIF
#
#------- rs2=
# Not defined since anything it might do could be done faster and easier with
# either Meta-Shift-Reset or the main power switch.
#
#------- smkx=\E[1!z
#------- rmkx=\E[!z
# These sequences apply to the cursor and setup keys only, not to the
# numeric keypad. But it doesn't matter anyway, since making these
# available to programs is inadvisable.
# For the key definitions below, all sequences beginning with \E$ are
# custom and programmed into the terminal via is2. \E$ also has no
# meaning to any other terminal.
#
#------- cmdch=\E[;%p1%d!t
# Available, but making it available to programs is inadvisable.
#------- smxon=\E[1*q
# Available, but making it available to programs is inadvisable.
# Terminal will send XON/XOFF on buffer overflow.
#------- rmxon=\E[*q
# Available, but making it available to programs is inadvisable.
# Terminal will not notify on buffer overflow.
#------- smm=\E[2+x
#------- rmm=\E[+x
# Available, but making them available to programs is inadvisable.
#
# Printing:
# It's not made clear in the manuals, but based on other ansi/vt type
# terminals, it's a good guess that this terminal is capable of both
# "transparent print" (which doesn't copy data to the screen, and
# therefore needs mc5i: specified to say so) and "auxilliary print"
# (which does duplicate printed data on the screen, in which case mc4=
# and mc5= should use the \E[?4i and \E[?5i strings instead).
hds200|Human Designed Systems HDS200,
am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, lm#0,
acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
invis=\E[0;8m,
is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
rmul=\E[m\017, sc=\E7,
sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
vpa=\E[%i%p1%dd,
# <ht> through <el> included to specify padding needed in raw mode.
# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
avt-ns|concept avt no status line,
OTbs, am, eo, mir, ul, xenl, xon,
cols#80, it#8, lines#24, lm#192,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
sc=\E7,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
tbc=\E[2g, vpa=\E[%p1%{1}%+%dd,
avt-rv-ns|concept avt in reverse video mode/no status line,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
use=avt-ns,
avt-w-ns|concept avt in 132 column mode/no status line,
is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
use=avt-ns,
avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
smcup=\E[H\E[1;24;1;132w, use=avt-ns,
# Concept AVT with status line. We get the status line using the
# "Background status line" feature of the terminal. We swipe the
# first line of memory in window 2 for the status line, keeping
# 191 lines of memory and 24 screen lines for regular use.
# The first line is used instead of the last so that this works
# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
# assumes an 8 page AVT but lm isn't currently used anywhere.)
#
avt+s|concept avt status line changes,
eslok, hs,
lm#191,
dsl=\E[0*w, fsl=\E[1;1!w,
is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
tsl=\E[2;1!w\E[;%p1%dH\E[2K,
avt|avt-s|concept-avt|avt w/80 columns,
use=avt+s, use=avt-ns,
avt-rv|avt-rv-s|avt reverse video w/sl,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
use=avt+s, use=avt-ns,
avt-w|avt-w-s|concept avt 132 cols+status,
is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
use=avt+s, use=avt-ns,
avt-w-rv|avt-w-rv-s|avt wide+status+rv,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
#### Contel Business Systems.
#
# Contel c300 and c320 terminals.
contel300|contel320|c300|Contel Business Systems C-300 or C-320,
am, in, xon,
cols#80, lines#24, xmc#1,
bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
# Contel c301 and c321 terminals.
contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
use=contel300,
#### Data General (dg)
#
# According to James Carlson <carlson@xylogics.com> writing in January 1995,
# the terminals group at Data General was shut down in 1991; all these
# terminals have thus been discontinued.
#
# DG terminals have function keys that respond to the SHIFT and CTRL keys,
# e.g., SHIFT-F1 generates a different code from F1. To number the keys
# sequentially, first the unmodified key codes are listed as F1 through F15.
# Then their SHIFT versions are listed as F16 through F30, their CTRL versions
# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
# F46 through F60. This is done in the private "includes" below whose names
# start with "dgkeys+".
#
# DG terminals generally support 8 bit characters. For each of these terminals
# two descriptions are supplied:
# 1) A default description for 8 bits/character communications, which
# uses the default DG international character set and keyboard codes.
# 2) A description with suffix "-7b" for 7 bits/character communications.
# This description must use the NON-DEFAULT native keyboard language.
# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
# Ctrl/Shift fdkeys (kf34-kf44).
dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
kf11=\233011z, kf12=\233012z, kf13=\233013z,
kf14=\233014z, kf15=\233000z, kf16=\233101z,
kf17=\233102z, kf18=\233103z, kf19=\233104z,
kf2=\233002z, kf20=\233105z, kf21=\233106z,
kf22=\233107z, kf23=\233108z, kf24=\233109z,
kf25=\233110z, kf26=\233111z, kf27=\233112z,
kf28=\233113z, kf29=\233114z, kf3=\233003z,
kf30=\233100z, kf31=\233201z, kf32=\233202z,
kf33=\233203z, kf34=\233204z, kf35=\233205z,
kf36=\233206z, kf37=\233207z, kf38=\233208z,
kf39=\233209z, kf4=\233004z, kf40=\233210z,
kf41=\233211z, kf42=\233212z, kf43=\233213z,
kf44=\233214z, kf45=\233200z, kf46=\233301z,
kf47=\233302z, kf48=\233303z, kf49=\233304z,
kf5=\233005z, kf50=\233305z, kf51=\233306z,
kf52=\233307z, kf53=\233308z, kf54=\233309z,
kf55=\233310z, kf56=\233311z, kf57=\233312z,
kf58=\233313z, kf59=\233314z, kf6=\233006z,
kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
khome=\233H, kprt=\233i,
dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
kf9=\E[009z, khome=\E[H, kprt=\E[i,
dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
kf8=^^x, kf9=^^y, khome=^H,
dgkeys+15|Private entry describing 15 DG mode special keys,
kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
kf9=^^y,
# Data General color terminals use the "Tektronix" color model. The total
# number of colors varies with the terminal model, as does support for
# attributes used in conjunction with color.
# Removed u7, u8 definitions since they conflict with tack:
# Preserve user-defined colors in at least some cases.
# u7=^^Fh,
# Default is ACM mode.
# u8=^^F}20^^Fi^^F}21,
#
dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
bce,
colors#16, ncv#53, pairs#256,
op=\036Ad\036Bd,
setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
dg+fixed|Fixed color info for DG D430C terminals in DG mode,
use=dgunix+fixed,
# Video attributes are coordinated using static variables set by "sgr", then
# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
# (D=dim, U=underline, B=blink, R=reverse.)
dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
bce,
colors#8, ncv#16, pairs#64,
op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
dg+color|Color info for Data General D470C terminals in ANSI mode,
colors#16, ncv#53, pairs#256,
setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
use=dg+color8,
dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
bce,
colors#8, ncv#16, pairs#64,
op=\036Ad\036Bd,
setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
dgmode+color|Color info for Data General D470C terminals in DG mode,
colors#16, pairs#256,
setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
use=dgmode+color8,
dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
bce, ccc,
colors#52, ncv#53, pairs#26,
initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X,
oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
scp=\036RG2%p1%02X,
# Colors are in the order: normal, reverse, dim, dim + reverse.
dg+ccc|Configurable color info for DG D430C terminals in DG mode,
bce, ccc,
colors#52, ncv#53, pairs#26,
initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
# The generic DG terminal type (an 8-bit-clean subset of the 6053)
# Initialization string 1 sets:
# ^R - vertical scrolling enabled
# ^C - blinking enabled
dg-generic|Generic Data General terminal in DG mode,
am, bw, msgr, xon,
cols#80, lines#24,
bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
smul=^T, use=dgkeys+11,
# According to the 4.4BSD termcap file, the dg200 <cup> should be the
# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
# maybe they were originally nuls (which would fit).
dg200|data general dasher 200,
OTbs, am, bw,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
smso=^^D, smul=^T,
# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
dg210|dg-ansi|Data General 210/211,
am,
cols#80, lines#24,
OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m,
smul=\E[4;m,
# From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
# courtesy of Carlos Rucalde of Vantage Software, Inc.
# (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
# I suspect the d200 function keys actually work on the dg211, check it out.)
dg211|Data General d211,
cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
# dg450 from Cornell (not official)
dg450|dg6134|data general 6134,
cub1@, cuf1=^X, use=dg200,
# Not official...
# Note: lesser Dasher terminals will not work with vi because vi insists upon
# having a command to move straight down from any position on the bottom line
# and scroll the screen up, or a direct vertical scroll command. The 460 and
# above have both, the D210/211, for instance, has neither. We must use ANSI
# mode rather than DG mode because standard UNIX tty drivers assume that ^H is
# backspace on all terminals. This is not so in DG mode.
# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
# grounds that there is no matching ":ml:"
# fixed garbled ":k9=\E[00\:z:" capability -- esr)
dg460-ansi|Data General Dasher 460 in ANSI-mode,
OTbs, am, msgr, ul,
cols#80, it#8, lines#24,
OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
smul=\E[4m,
# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
# Data General 605x
# Ought to work for a Model 6242, Type D210 as well as a 605x.
# Note that the cursor-down key transmits ^Z. Job control users, beware!
# This also matches a posted description of something called a `Dasher 100'
# so there's a dg100 alias here.
# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
dg6053-old|dg100|data general 6053,
OTbs, am, bw, ul,
cols#80, lines#24,
OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
smul=^T,
# (Some performance can be gained over the generic DG terminal type)
dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
xon@,
home=^P\0\0, ll=^P\0^W, use=dg-generic,
# Like 6053, but adds reverse video and more keypad and function keys.
d200|d200-dg|Data General DASHER D200,
bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
use=dg6053,
# DASHER D210 series terminals in ANSI mode.
# Reverse video, no insert/delete character/line, 7 bits/character only.
#
# Initialization string 1 sets:
# <0 - scrolling enabled
# <1 - blink enabled
# <4 - print characters regardless of attributes
d210|d214|Data General DASHER D210 series,
am, bw, msgr, xon,
cols#80, lines#24,
bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m,
sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
# DASHER D210 series terminals in DG mode.
# Like D200, but adds clear to end-of-screen and needs XON/XOFF.
d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
xon,
ed=^^FF, use=d200-dg,
# DASHER D211 series terminals in ANSI mode.
# Like the D210, but with 8-bit characters and local printer support.
#
# Initialization string 2 sets:
# \E[2;1;1;1v
# 2;1 - 8 bit operations
# 1;1 - 8 bit (international) keyboard language
# \E(B - default primary character set (U.S. ASCII)
# \E)4 - default secondary character set (international)
# ^O - primary character set
#
d211|d215|Data General DASHER D211 series,
km,
is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
use=d210,
# Initialization string 2 sets:
# \E[2;0;1;0v
# 2;0 - 7 bit operations
# 1;0 - 7 bit (native) keyboard language
# \E(0 - default character set (the keyboard native language)
# ^O - primary character set
d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
km@,
is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
# Like the D210 series, but adds support for 8-bit characters.
#
# Reset string 2 sets:
# ^^N - secondary character set
# ^^FS0> - 8 bit international character set
# ^^O - primary character set
# ^^FS00 - default character set (matching the native keyboard language)
#
d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
km,
rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
use=d211-dg,
# Enhanced DG mode with changes to be more UNIX compatible.
d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
mc5i,
it#8,
acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
rs2=\036N\036FS0E\036O\036FS00,
sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
lines#25,
is3=\036Fz2, use=d216+,
d217-unix|Data General DASHER D217 in DG-UNIX mode,
use=d216-unix,
d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
use=d216-unix-25,
# DASHER D220 color terminal in ANSI mode.
# Like the D470C but with fewer colors and screen editing features.
#
# Initialization string 1 sets:
# \E[<0;<1;<4l
# <0 - scrolling enabled
# <1 - blink enabled
# <4 - print characters regardless of attributes
# \E[m - all attributes off
# Reset string 1 sets:
# \Ec - initial mode defaults (RIS)
#
d220|Data General DASHER D220,
mc5i@,
dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
use=dg+color8, use=d470c,
d220-7b|Data General DASHER D220 in 7 bit mode,
mc5i@,
dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
use=dg+color8, use=d470c-7b,
# Initialization string 3 sets:
# - default cursor (solid rectangle)
# Reset string 2 sets:
# ^^N - secondary character set
# ^^FS0> - 8 bit international character set
# ^^O - primary character set
# ^^FS00 - default character set (matching the native keyboard language)
#
d220-dg|Data General DASHER D220 color terminal in DG mode,
mc5i@,
dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
use=d470c-dg,
# DASHER D230C color terminal in ANSI mode.
# Like the D220 but with minor ANSI compatibility improvements.
#
d230c|d230|Data General DASHER D230C,
blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
smul=\E[4;50m, use=dgkeys+7b, use=d220,
d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
use=d220-dg,
# DASHER D400/D450 series terminals.
# These add intelligent features like insert/delete to the D200 series.
#
# Initialization string 2 sets:
# ^^FQ2 - default cursor (solid rectangle)
# ^^FW - character protection disabled
# ^^FJ - normal (80 column) mode
# ^^F\^ - horizontal scrolling enabled (for alignment)
# ^^FX004? - margins at columns 0 and 79
# ^^F] - horizontal scrolling disabled
# ^^O - primary character set
# ^^FS00 - default character set (the keyboard native language)
# - (should reset scrolling regions, but that glitches the screen)
# Reset string 1 sets:
# ^^FA - all terminal defaults except scroll rate
# Reset string 2 sets:
# ^^F] - horizontal scrolling disabled
# ^^FT0 - jump scrolling
#
d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
mc5i,
acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
ich1=^^J, il1=^^FH,
is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
rs1=^^FA, rs2=\036F]\036FT0,
sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
sgr0=\017\025\035\036E\036O, smacs=^^N,
vpa=\020\177%p1%c, use=d210-dg,
# DASHER D410/D460 series terminals in ANSI mode.
# These add a large number of intelligent terminal features.
#
# Initialization string 1 sets:
# \E[<0;<1;<2;<4l
# <0 - scrolling enabled
# <1 - blink enabled
# <2 - horizontal scrolling enabled (for alignment)
# <4 - print characters regardless of attributes
# \E[5;0v - normal (80 column) mode
# \E[1;1;80w - margins at columns 1 and 80
# \E[1;6;<2h
# 1 - print all characters even if protected
# 6 - character protection disabled
# <2 - horizontal scrolling disabled
# - (should reset scrolling regions, but that glitches the screen)
#
# Initialization string 2 sets:
# \E[3;2;2;1;1;1v
# 3;2 - default cursor (solid rectangle)
# 2;1 - 8 bit operations
# 1;1 - international keyboard language
# \E(B - default primary character set (U.S. ASCII)
# \E)4 - default secondary character set (international)
# ^O - primary character set
#
# Reset string 1 sets:
# \Ec - initial mode defaults (RIS)
# \E[<2h - horizontal scrolling disabled
#
# Reset string 2 sets:
# \E[4;0;2;1;1;1v
# 4;0 - jump scrolling
# 2;1 - 8 bit operations
# 1;1 - 8 bit (international) keyboard language
# \E(B - default primary character set (U.S. ASCII)
# \E)4 - default secondary character set (international)
#
d410|d411|d460|d461|Data General DASHER D410/D460 series,
mc5i,
acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
rs2=\E[4;0;2;1;1;1v\E(B\E)4,
sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;,
sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
# Initialization string 2 sets:
# \E[3;2;2;0;1;0v
# 3;2 - default cursor (solid rectangle)
# 2;0 - 7 bit operations
# 1;0 - 7 bit (native) keyboard language
# \E(0 - default character set (the keyboard native language)
# ^O - primary character set
#
# Reset string 2 sets:
# \E[4;0;2;0;1;0v
# 4;0 - jump scrolling
# 2;0 - 7 bit operations
# 1;0 - 7 bit (native) keyboard language
# \E(0 - default character set (the keyboard native language)
#
d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
km@,
enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
rs2=\E[4;0;2;0;1;0v\E(0,
sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
km,
enacs@, rmacs=\036FS00,
sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
use=d400-dg,
# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
#
# Initialization string 1 sets:
# \E[<0;<1;<2;<4l
# <0 - scrolling enabled
# <1 - blink enabled
# <2 - horizontal scrolling enabled (for alignment)
# <4 - print characters regardless of attributes
# \E[5;1v - compressed (135 column) mode
# \E[1;1;126 - margins at columns 1 and 126
# \E[1;6;<2h
# 1 - print all characters even if protected
# 6 - character protection disabled
# <2 - horizontal scrolling disabled
# - (should reset scrolling regions, but that glitches the screen)
#
# Reset string 1 sets:
# \Ec - initial mode defaults (RIS)
# \E[5;1v - compressed (135 column) mode
# \E[1;1;126w - margins at columns 1 and 126
# \E[<2h - horizontal scrolling disabled
#
d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
cols#126,
is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
cols#126,
is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
use=d410-dg,
# These add intelligent features like scrolling regions.
d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
vpa=\036FPFF%p1%2.2X,
wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
use=d216+,
d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
cols#132,
is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
rs2=\036P@1\036FK\036FX0083,
wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
use=d412-unix,
d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
lines#25,
is3=\036Fz2,
wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
use=d462+,
d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
eslok, hs,
clear=\036FG\036PH, fsl=\036F}01\022,
is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
tsl=\036F}00\036FP%p1%2.2X18\036PG,
wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
use=d462+,
# Relative cursor motions are confined to the current window,
# which is not what the scrolling region specification expects.
# Thus, relative vertical cursor positioning must be deleted.
d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
cud1@, cuu1@, ll@, use=d462+,
d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
use=d412-unix,
d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
use=d412-unix-w,
d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
use=d412-unix-25,
d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
use=d412-unix-s,
d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
use=d412-unix-sr,
d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
use=d413-unix,
d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
use=d413-unix-w,
d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
use=d413-unix-25,
d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
use=d413-unix-s,
d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
use=d413-unix-sr,
d430c-dg|d430-dg|Data General D430C in DG mode,
use=d413-dg, use=dg+fixed,
d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
use=d413-dg, use=dg+ccc,
d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
use=d413-unix, use=dgunix+fixed,
d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
use=d413-unix-w, use=dgunix+fixed,
d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
use=d413-unix-25, use=dgunix+fixed,
d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
use=d413-unix-s, use=dgunix+fixed,
d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
use=d413-unix-sr, use=dgunix+fixed,
d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
use=d413-unix, use=dgunix+ccc,
d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
use=d413-unix-w, use=dgunix+ccc,
d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
use=d413-unix-25, use=dgunix+ccc,
d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
use=d413-unix-s, use=dgunix+ccc,
d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
use=d413-unix-sr, use=dgunix+ccc,
# DASHER D470C color terminal in ANSI mode.
# Like the D460 but with 16 colors and without a compressed mode.
#
# Initialization string 1 sets:
# \E[<0;<1;<2;<4l
# <0 - scrolling enabled
# <1 - blink enabled
# <2 - horizontal scrolling enabled (for alignment)
# <4 - print characters regardless of attributes
# \E[1;1;80w - margins at columns 1 and 80
# \E[1;6;<2h
# 1 - print all characters even if protected
# 6 - character protection disabled
# <2 - horizontal scrolling disabled
# - (should reset scrolling regions, but that glitches the screen)
#
d470c|d470|Data General DASHER D470C,
is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
use=dg+color, use=d460,
d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;,
use=dg+color, use=d460-7b,
# Initialization string 2 sets:
# ^^FQ2 - default cursor (solid rectangle)
# ^^FW - character protection disabled
# ^^F\^ - horizontal scrolling enabled (for alignment)
# ^^FX004? - margins at columns 0 and 79
# ^^F] - horizontal scrolling disabled
# ^^O - primary character set
# ^^FS00 - default character set (the keyboard native language)
# - (should reset scrolling regions, but that glitches the screen)
#
d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
use=dgmode+color, use=d460-dg,
# DASHER D555 terminal in ANSI mode.
# Like a D411, but has an integrated phone.
d555|Data General DASHER D555,
use=d411,
d555-7b|Data General DASHER D555 in 7-bit mode,
use=d411-7b,
d555-w|Data General DASHER D555 in wide mode,
use=d411-w,
d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
use=d411-7b-w,
d555-dg|Data General DASHER D555 series in DG mode,
use=d411-dg,
# DASHER D577 terminal in ANSI mode.
# Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
d577|Data General DASHER D577,
use=d411,
d577-7b|Data General DASHER D577 in 7-bit mode,
use=d411-7b,
d577-w|Data General DASHER D577 in wide mode,
use=d411-w,
d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
use=d411-7b-w,
d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
use=d411-dg,
# DASHER D578 terminal.
# Like a D577, but without compressed mode; like a D470C in this respect.
#
# Initialization string 1 sets:
# \E[<0;<1;<2;<4l
# <0 - scrolling enabled
# <1 - blink enabled
# <2 - horizontal scrolling enabled (for alignment)
# <4 - print characters regardless of attributes
# \E[1;1;80w - margins at columns 1 and 80
# \E[1;6;<2h
# 1 - print all characters even if protected
# 6 - character protection disabled
# <2 - horizontal scrolling disabled
# - (should reset scrolling regions, but that glitches the screen)
#
d578|Data General DASHER D578,
is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
d578-7b|Data General DASHER D578 in 7-bit mode,
is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
#### Datamedia (dm)
#
# Datamedia was headquartered in Nashua, New Hampshire until it went
# out of business in 1993, but the ID plates on the terminals referred
# to the factory in Pennsauken, NJ. The factory was sold to a PCB board
# manufacturer which threw out all information about the terminals.
#
cs10|colorscan|Datamedia Color Scan 10,
msgr,
cols#80, lines#24,
bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smso=\E[7m, smul=\E[4m,
cs10-w|Datamedia Color Scan 10 with 132 columns,
cols#132,
cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
dm1520|dm1521|datamedia 1520,
OTbs, am, xenl,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
khome=^Y,
# dm2500: this terminal has both <ich> and <smir>. Applications using
# termcap/terminfo directly (rather than through ncurses) might be confused.
dm2500|datamedia2500|datamedia 2500,
OTbs, OTnc,
cols#80, lines#24,
bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
dch1=\020\010\030\035$<10*>,
dl1=\020\032\030\035$<10*>, el=^W, home=^B,
ich1=\020\034\030\035$<10*>,
il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
smdc=^P, smir=^P, smso=^N,
# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
# also, has a meta-key.
# From: <goldberger@su-csli.arpa>
# (dmchat: ":MT:" changed to ":km:" -- esr)
dmchat|dmchat version of datamedia 2500,
km,
dl1=\020\032\030\035$<2/>,
il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
# (dm3025: ":MT:" changed to ":km:" -- esr)
dm3025|datamedia 3025a,
OTbs, km,
cols#80, it#8, lines#24,
bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
smir=\EP, smso=\EO1,
dm3045|datamedia 3045a,
OTbs, am, eo, km@, ul, xenl,
dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
use=dm3025,
# Datamedia DT80 soft switches:
# 1 0=Jump 1=Smooth
# Autorepeat 0=off 1=on
# Screen 0=Dark 1=light
# Cursor 0=u/l 1=block
#
# 2 Margin Bell 0=off 1=on
# Keyclick 0=off 1=on
# Ansi/VT52 0=VT52 1=Ansi
# Xon/Xoff 0=Off 1=On
#
# 3 Shift3 0=Hash 1=UK Pound
# Wrap 0=Off 1=On
# Newline 0=Off 1=On
# Interlace 0=Off 1=On
#
# 4 Parity 0=Odd 1=Even
# Parity 0=Off 1=On
# Bits/Char 0=7 1=8
# Power 0=60Hz 1=50Hz
#
# 5 Line Interface 0=EIA 1=Loop
# Aux Interface 0=EIA 1=Loop
# Local Copy 0=Off 1=On
# Spare
#
# 6 Aux Parity 0=Odd 1=Even
# Aux Parity 0=Off 1=On
# Aux Bits/Char 0=7 1=8
# CRT Saver 0=Off 1=On
# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
dm80|dmdt80|dt80|datamedia dt80/1,
clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
use=vt100,
# except in 132 column mode, where it needs a little padding.
# This is still less padding than the vt100, and you can always turn on
# the ^S/^Q handshaking, so you can use vt100 flavors for things like
# reverse video.
dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
cols#132,
clear=\E[H\E[2J$<50/>, cud1=^J,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
dt80-sas|Datamedia DT803/DTX for SAS usage,
am, bw,
cols#80, lines#24,
acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
bel=^G, clear=^L, cr=^M,
csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
cub1=^H, cud1=\EB, cuf1=^\,
cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
smso=\E$2\004, tbc=\E'0,
# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
# These aren't end-all Excel termcaps; but do insert/delete char/line
# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
# The naming convention has been bent somewhat, with the use of E? (where
# E is for 'Excel') as # a name. This was done to distinguish the entries
# from the other Datamedias in use here, and yet to associate a model of
# the Excel terminals with the regular datamedia terminals that share
# major characteristics.
excel62|excel64|datamedia Excel 62,
dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
use=dt80,
excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
use=dt80w,
excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
smir=\E[4h, use=dt80,
#### Falco
#
# Falco Data Products
# 440 Potrero Avenue
# Sunnyvale, CA 940864-196
# Vox: (800)-325-2648
# Fax: (408)-745-7860
# Net: techsup@charm.sys.falco.com
#
# Current Falco models as of 1995 are generally ANSI-compatible and support
# emulations of DEC VT-series, Wyse, and Televideo types.
#
# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
# This terminal was released around 1983 and was discontinued long ago.
# The standout and underline highlights are the same.
falco|ts1|ts-1|falco ts-1,
OTbs, am,
cols#80, it#8, lines#24,
bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
smir=\Eq, smso=\Eg1, smul=\Eg1,
falco-p|ts1p|ts-1p|falco ts-1 with paging option,
OTbs, am, da, db, mir, msgr, ul,
cols#80, it#8, lines#24,
bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
smso=\Eg4, smul=\Eg1,
# (ts100: I added <rmam>/<smam> based on the init string -- esr)
ts100|ts100-sp|falco ts100-sp,
am, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
use=vt100+fnkeys,
ts100-ctxt|falco ts-100 saving context,
rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
#### Florida Computer Graphics
#
# Florida Computer Graphics Beacon System, using terminal emulator program
# "host.com", as provided by FCG. This description is for an early release
# of the "host" program. Known bug: <ed> clears the whole screen, so it's
# commented out.
# From: David Bryant <cbosg!djb> 1/7/83
beacon|FCG Beacon System,
am, da, db,
cols#80, lines#32,
bel=\ESTART\r\E37\r\EEND\r$<1>,
blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
cub1=^H, cud1=^J, cuf1=\EV,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
rmul=\ESTART\r\E60\,0\r\EEND\r,
sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
smul=\ESTART\r\E60\,1\r\EEND\r,
#### Fluke
#
# The f1720a differences from ANSI: no auto margin, destructive
# tabs, # of lines, funny highlighting and underlining
f1720|f1720a|fluke 1720A,
xt,
cols#80, lines#16, xmc#1,
bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smso=\E[7m, smul=\E[4m,
#### Liberty Electronics (Freedom)
#
# Liberty Electronics
# 48089 Fremont Blvd
# Fremont CA 94538
# Vox: (510)-623-6000
# Fax: (510)-623-7021
# From: <faletti@berkeley.edu>
# (f100: added empty <acsc> to suppress a tic warning;
# made this relative to adm+sgr -- note that <invis> isn't
# known to work for f100 but does on the f110. --esr)
f100|freedom|freedom100|freedom model 100,
OTbs, am, bw, hs, mir, msgr, xon,
cols#80, lines#24,
acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
vpa=\E[%p1%{32}%+%c, use=adm+sgr,
f100-rv|freedom-rv|freedom 100 in reverse video,
flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
# The f110 and f200 have problems with vi(1). They use the ^V
# code for the down cursor key. When kcud1 is defined in terminfo
# as ^V, the Control Character Quoting capability (^V in insert mode)
# is lost! It cannot be remapped in vi because it is necessary to enter
# a ^V to to quote the ^V that is being remapped!!!
#
# f110/f200 users will have to decide whether
# to lose the down cursor key or the quoting capability. We will opt
# initially for leaving the quoting capability out, since use of VI
# is not generally applicable to most interactive applications
# (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
f110|freedom110|Liberty Freedom 110,
bw@, eslok,
it#8, wsl#80,
blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
smso=\EG<, tsl=\Ef, use=f100,
f110-14|Liberty Freedom 110 14inch,
dch1@, use=f110,
f110-w|Liberty Freedom 110 - 132 cols,
cols#132, use=f110,
f110-14w|Liberty Freedom 110 14in/132 cols,
cols#132,
dch1@, use=f110,
# (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
f200|freedom200|Liberty Freedom 200,
OTbs, am, eslok, hs, mir, msgr, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
clear=^Z, cnorm=\E.1, cr=^M,
csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
flash=\Eo$<200/>\En, fsl=^M, home=^^,
hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
f200-w|Liberty Freedom 200 - 132 cols,
cols#132, use=f200,
# The f200 has the ability to reprogram the down cursor key. The key is
# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
# so powering the terminal off and on will not cause the change to be lost.
f200vi|Liberty Freedom 200 for vi,
flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
f200vi-w|Liberty Freedom 200 - 132 cols for vi,
cols#132, use=f200vi,
#### GraphOn (go)
#
# Graphon Corporation
# 544 Division Street
# Campbell, CA 95008
# Vox: (408)-370-4080
# Fax: (408)-370-5047
# Net: troy@graphon.com (Troy Morrison)
#
#
# The go140 and go225 have been discontinued. GraphOn now makes X terminals,
# including one odd hybrid that starts out life on power-up as a character
# terminal, than can be switched to X graphics mode (driven over the serial
# line) by an escape sequence. No info on this beast yet.
# (go140: I added <rmam>/<smam> based on the init string -- esr)
go140|graphon go-140,
OTbs,
cols#80, it#8, lines#24,
clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J$<10/>, el=\E[K, ht=^I,
if=/usr/share/tabset/vt100, il1=\E[L,
is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
go140w|graphon go-140 in 132 column mode,
am,
cols#132,
is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
use=go140,
# Hacked up vt200 termcap to handle GO-225/VT220
# From: <edm@nwnexus.WA.COM>
# (go225: I added <rmam>/<smam> based on the init string -- esr)
go225|go-225|Graphon 225,
OTbs, am, mir, xenl,
cols#80, it#8, lines#25, vt#3,
blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
#### Harris (Beehive)
#
# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
# Their terminal group is ancient history now (1995) though the parent
# company is still in business.
#
# Beehive documentation is undated and marked Preliminary and has no figures
# so we must have early Superbee2 (Model 600, according to phone conversation
# with mfr.). It has proved reliable except for some missing padding
# (notably after \EK and <nl> at bottom of screen).
#
# The key idea is that AEP mode is poison for <cup> & that US's in
# the local memory should be avoided like the plague. That means
# that the 2048 character local buffer is used as 25 lines of 80
# characters, period. No scrolling local memory, folks. It also
# appears that we cannot use naked INS LINE feature since it uses
# US. The sbi fakes <il1> with an 80-space insert that may be too
# slow at low speeds; also spaces get converted to \040 which is
# too long for some programs (not vi). DEL LINE is ok but slow.
#
# The <nl> string is designed for last line of screen ONLY; cup to
# 25th line corrects the motion inherent in scrolling to Page 1.
#
# There is one understood bug. It is that the screen appears to
# pop to a new (blank) page after a <nel>, or leave a half-line
# ellipsis to a quad that is the extra 48 memory locations. The
# data received is dumped into memory but not displayed. Not to
# worry if <cup> is being used; the lines not displayed will be,
# whenever the cursor is moved up there. Since <cup> is addressed
# relative to MEMORY of window, nothing is lost; but beware of
# relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
# therefore, is setenv MORE -c .
#
# WARNING: Not all features tested.
#
# Timings are assembled from 3 sources. Some timings may reflect
# SB2/Model 300 that were used if more conservative.
# Tested on a Model 600 at 1200 and 9600 bd.
#
# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
# placed on the keyboard and useless because of AEP, is made
# into a backspace key. In use ESC must be pressed twice (to send)
# and sending ^C must be prefixed by ESC to avoid that weird
# transmit mode associated with ENTER key.
#
# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
# the screen, then it has dropped into ENTER mode; hit
# RESET--ONLINE--!tset.
#
# As delivered this machine has a FATAL feature that will throw
# it into that strange transmit state (SPOW) if the space bar is
# hit after a CR is received, but before receiving a LF (or a
# few others).
#
# The circuits MUST be modified to eliminate the SPOW latch.
# This is done by strapping on chip A46 of the I/O board; cut
# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
# chip. This mod has been checked out on a Mod 600 of Superbee II.
# With this modification absurdly high timings on cr are
# unnecessary.
#
# NOTE WELL that the rear panel switch should be set to CR/LF,
# not AEP!
#
sb1|beehive superbee,
OTbs, am, bw, da, db, mir, ul, xsb,
cols#80, lines#25, xmc#1,
bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
smso=\E_1, smul=\E_0, tbc=\E3,
sbi|superbee|beehive superbee at Indiana U.,
xsb,
cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
use=sb1,
# Alternate (older) description of Superbee - f1=escape, f2=^C.
# Note: there are at least 3 kinds of superbees in the world. The sb1
# holds onto escapes and botches ^C's. The sb2 is the best of the 3.
# The sb3 puts garbage on the bottom of the screen when you scroll with
# the switch in the back set to CRLF instead of AEP. This description
# is tested on the sb2 but should work on all with either switch setting.
# The f1/f2 business is for the sb1 and the <xsb> can be taken out for
# the other two if you want to try to hit that tiny escape key.
# This description is tricky: being able to use cup depends on there being
# 2048 bytes of memory and the hairy <nl> string.
superbee-xsb|beehive super bee,
am, da, db, xsb,
cols#80, it#8, lines#25,
clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
home=\EH, ht=^I, hts=\E1,
ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
# This loses on lines > 80 chars long, use at your own risk
superbeeic|super bee with insert char,
ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
sb2|sb3|fixed superbee,
xsb@, use=superbee,
#### Beehive Medical Electronics
#
# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
# Regarding your question though; Beehive terminals weren't made by Harris.
# They were made by Beehive Medical Electronics in Utah. They went out of
# business in the early '80s.
#
# (OK, then, I don't know why a couple of these say "harris beehive".)
#
# Reports are that most of these Beehive entries (except superbee) have not
# been tested and do not work right. <rmso> is a trouble spot. Be warned.
# (bee: <ich1> was empty, which is obviously bogus -- esr)
beehive|bee|harris beehive,
OTbs, am, mir,
cols#80, lines#24,
cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
smir=\EQ, smso=\EdP, smul=\Ed`,
# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
# good grief - does this entry make :sg:/:ug: when it doesn't have to?
# look at those spaces in <rmso>/<smso>. Seems strange to me...
# (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
# really care, cook up one using ^F -- esr)
beehive3|bh3m|beehiveIIIm|harris beehive 3m,
OTbs, am,
cols#80, it#8, lines#20,
bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
beehive4|bh4|beehive 4,
am,
cols#80, lines#24,
bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
# There was an early Australian kit-built computer called a "Microbee".
# It's not clear whether this is for one of those or for a relative
# of the Beehive.
microb|microbee|micro bee series,
OTbs, am,
cols#80, it#8, lines#24,
bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
# 8675, 8686, and bee from Cyrus Rahman
# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
ha8675|harris 8675,
is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
kf8=\177, kf9=\Ee, use=bee,
# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
# in :is: -- esr)
ha8686|harris 8686,
is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
use=bee,
#### Hazeltine
#
# Hazeltine appears to be out of the terminal business as of 1995. These
# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
# Harris. They have a hazeltine.com domain (but no web page there ) and can
# be reached at:
#
# Hazeltine
# 450 East Pulaski Road
# Greenlawn, New York 11740
#
# As late as 1993, manuals for the terminal product line could still be
# purchased from:
#
# TRW Customer Service Division
# 15 Law Drive
# P.O. Box 2076
# Fairfield, NJ 07007-2078
#
# They're now (1998) a subsidiary of General Electric, operating under the
# marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
# at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
#
# Since <cuf1> is blank, when you want to erase something you
# are out of luck. You will have to do ^L's a lot to
# redraw the screen. h1000 is untested. It doesn't work in
# vi - this terminal is too dumb for even vi. (The code is
# there but it isn't debugged for this case.)
hz1000|hazeltine 1000,
OTbs,
cols#80, lines#12,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
ind=^J,
# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
hz1420|hazeltine 1420,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
smso=\E^_,
# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
# freakout with out-of-range args and tn3270. No hz since it needs to
# receive tildes.
hz1500|hazeltine 1500,
OTbs, am, hz,
cols#80, lines#24,
bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
# h1510 assumed to be in sane escape mode. Else use h1500.
# (h1510: early versions of this entry apparently had "<rmso=\E^_>,
# <smso=\E^Y>, but these caps were commented out in 8.3; also,
# removed incorrect and overridden ":do=^J:" -- esr)
hz1510|hazeltine 1510,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
el=\E^O, il1=\E^Z, ind=^J,
# Hazeltine 1520
# The following switch settings are assumed for normal operation:
# FULL CR U/L_CASE ESCAPE
# FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
# Other switches may be set for operator convenience or communication
# requirements.
hz1520|Hazeltine 1520,
OTbs, am, bw, msgr,
cols#80, lines#24,
bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
# This version works with the escape switch off
# (h1520: removed incorrect and overridden ":do=^J:" -- esr)
hz1520-noesc|hazeltine 1520,
am, hz,
cols#80, lines#24,
bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
# Note: the h1552 appears to be the first Hazeltine terminal which
# is not braindamaged. It has tildes and backprimes and everything!
# Be sure the auto lf/cr switch is set to cr.
hz1552|hazeltine 1552,
OTbs,
cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
lf2=red, lf3=green, use=vt52,
hz1552-rv|hazeltine 1552 reverse video,
cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
# Note: h2000 won't work well because of a clash between upper case and ~'s.
hz2000|hazeltine 2000,
OTbs, OTnc, am,
cols#74, lines#27,
bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
il1=~\032$<6>, ind=^J, pad=\177,
# Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
# I tested this termcap entry for the Hazeltine Esprit with vi. It seems
# to work ok. There is one problem though if one types a lot of garbage
# characters very fast vi seems not able to keep up and hangs while trying
# to insert. That's in insert mode while trying to insert in the middle of
# a line. It might be because the Esprit doesn't have insert char and delete
# char as a built in function. Vi has to delete to end of line and then
# redraw the rest of the line.
esprit|Hazeltine Esprit I,
OTbs, am, bw,
cols#80, lines#24,
bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
esprit-am|hazeltine esprit auto-margin,
am, use=esprit,
# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
# Vi it seems always wants to send a control J for "do" and it turned out
# that the terminal would work somewhat if the auto LF/CR was turned off.
# (hmod1: removed :dn=~^K: -- esr)
hmod1|Hazeltine Modular 1,
OTbs, am, hz,
cols#80, lines#24,
bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
#
# Hazeltine Executive 80 Model 30 (1554?)
# from Will Martin <control@ALMSA-1.ARPA> via BRL
# Like VT100, except for different "am" behavior.
hazel|exec80|h80|he80|Hazeltine Executive 80,
OTbs, OTpt, am,
cols#80, it#8, lines#24, vt#3,
OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
smul=\E[4m$<2/>,
#### IBM
#
ibm327x|line mode IBM 3270 style,
gn,
clear=^M^J, el=^M, home=^M,
ibm3101|i3101|IBM 3101-10,
OTbs, am, xon,
cols#80, lines#24,
bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
ibm3151|IBM 3151 display,
is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
# removed kend, knp, kpp -TD
ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
OTbs, am, mir, msgr,
cols#80, it#8, lines#24,
acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
rmso=\E4@, rmul=\E4@,
sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
ibm3161-C|IBM 3161-C NLS terminal using cartridge,
rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
ibm3162|IBM 3162 display,
blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
use=ibm3161-C,
# This really should not use setab/setaf, but it is clear that the
# original terminfo does not toggle red/blue colors as in setb/setf.
ibm3164|i3164|IBM 3164,
msgr,
colors#8, pairs#64,
op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
setab=\E4 %p1%{64}%+%c,
setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
smcup=\E!9/N\E>B, use=ibm3161,
ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
am, bw, msgr, xon,
cols#80, it#8, lines#25,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
rmso=\E[m, rmul=\E[m, rs2=\Ec,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
ibmaed|IBM Experimental display,
OTbs, am, eo, msgr,
cols#80, it#8, lines#52,
clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
rmso=\E0, sgr0=\E0, smso=\E0,
ibm-apl|apl|IBM apl terminal simulator,
lines#25, use=dm1520,
# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
ibmmono|IBM workstation monochrome,
eslok, hs,
bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
use=ibm3101,
ibmega|IBM Enhanced Color Display,
cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
nel=^M^J, use=ibmmono,
# This color scheme is assumed in some recent IBM terminal descriptions
# (green on black, emulated on a 16-color terminal).
ibm+color|IBM color definitions,
colors#8, ncv#3, pairs#64,
op=\E[32m\E[40m,
setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
ibm+16color|IBM aixterm color definitions,
colors#16, pairs#256,
setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
ibm5154|IBM 5154 Color display,
colors#8, ncv@, pairs#64,
bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
use=ibm+color,
ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
use=ibmmono,
ibmvga-c|IBM VGA display color termcap,
cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
nel=^M^J, use=ibmega-c,
ibmvga|IBM VGA display,
cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
nel=^M^J, use=ibmega,
# ibmapa* and ibmmono entries come from ACIS 4.3 distribution
rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
lines#32,
dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
ibm6155|IBM 6155 Black & White display,
blink@, bold@, use=ibm5151,
# Advanced Monochrome (6153) and Color (6154) Graphics Display:
ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
lines#31,
dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
lines#31,
dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
use=ibmega-c,
ibm6154|IBM 6154 Color displays,
blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
sgr0=\E[0;10m, use=ibm5154,
ibm6153|IBM 6153 Black & White display,
blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
sgr0=\E[0;10m, use=ibm5151,
ibm6153-90|IBM 6153 Black & White display,
cols#90, lines#36,
blink@, bold@, use=ibm5151,
ibm6153-40|IBM 6153 Black & White display,
cols#40, lines#12, use=ibm6153-90,
ibm8512|ibm8513|IBM color VGA Terminal,
am, mir, msgr,
cols#80, it#8, lines#25,
acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
rmir=\E[4l, rmso=\E[m, rmul=\E[m,
rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
use=ibm8503,
hft-c|HFT with Color,
colors#8, pairs#64,
acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
use=ibm5151, use=ibm+color,
hft-c-old|HFT with Color PC850,
colors#8, pairs#64,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
use=ibm+color,
hft-old|AIWS High Function Terminal,
am, xon,
cols#80, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
ibm-system1|system1|ibm system/1 computer,
am, xt,
cols#80, lines#24,
bel=^G, clear=^Z, cub1=^H, cuf1=^\,
cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
ind=^J,
# lft-pc850 : IBM Low Function Terminal Device
# lft "supports" underline, bold, and blink in the sense that the lft code
# sets all the right bits. HOWEVER, depending upon the adapter, these
# attributes may or may not be supported by the device driver.
lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
am, bw, msgr, xon,
cols#80, it#8, lines#25,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
tbc=\E[3g,
ibm5081|hft|IBM Megapel Color display,
acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
eslok, hs,
lines#33,
dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
use=ibmega-c,
ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
use=hft-c,
ibm8514|IBM 8514/a color VGA display,
eslok, hs,
dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
ibm8514-c|IBM 8514 color display with standout and underline,
eslok, hs,
lines#41,
cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
use=ibmega-c,
#
# AIX entries. IBM ships these with AIX 3.2.5.
# -- added rc, sc based on manpage -TD
# Note that we could use ibm+16color, but that is not how IBM defines this one.
aixterm|IBM Aixterm Terminal Emulator,
eslok, hs,
acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
eslok, hs,
acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
eslok, hs,
bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
tsl=\E[?%p1%dT, use=ibm6153,
jaixterm|IBM Kanji Aixterm Terminal Eemulator,
acsc@, use=aixterm,
jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
acsc@, use=aixterm-m,
# This flavor is adapted from xterm, in turn from aixterm documentation -TD
aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
use=ibm+16color, use=aixterm,
#### Infoton/General Terminal Corp.
#
# gt100 sounds like something DEC would come out with. Let's hope they don't.
i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
OTbs, am,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
ind=^J, rmso=\Ea, smso=\Eb,
i400|infoton 400,
OTbs, am,
cols#80, lines#25,
bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
# (addrinfo: removed obsolete ":bc=^Z:" -- esr)
addrinfo,
am,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
infoton,
am,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
ed=^K, ind=^J, ll=^H^\,
# The ICL6402 was actually the Kokusai Display System 6402.
# The 6404 was the KDS7372 (color version of the 6402).
#
# ICL6404 control codes follow:
#
#code function
#~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#ctrl-A set SOM position at cursor position
#ctrl-G Bell
#ctrl-H Backspace
#ctrl-I Horiz tab
#ctrl-J Linefeed
#ctrl-K Cursor up
#ctrl-L Cursor right
#ctrl-M Carriage return
#ctrl-N Disable xon/xoff to host
#ctrl-O Enable xon/xoff to host
#ctrl-R Enable bidirectional mode
#ctrl-T Disable bidirectional mode
#ctrl-V Cursor down
#ctrl-Z Clear unprotected data to insert char
#ctrl-^ Cursor home
#ctrl-_ Newline
#
#ESC lead-in char for multiple character command
#
#ESC space R execute power on sequence
#ESC ! p1 p2 define scroll region:
# p1 = scroll top line: 20h - 37h
# p1 = scroll bottom line: 20h - 37h
#ESC " unlock keyboard
#ESC # lock keyboard
#ESC $ Semi-graphics mode on
#ESC % Semi-graphics mode off
#ESC & protect mode on
#ESC ' protect mode off
#ESC ( write protect mode off (full intensity)
#ESC ) write protect mode on (half intensity)
#
#ESC * clear screen
#ESC + clear unprotected data to insert char
#ESC , clear unprotected data to half intensity spaces
#ESC - p1 p2 p3 p4 address cursor to page, row, column:
# p1 = page number 0 - 3
# p2 = row 20h - 7fh
# p3 = column (lo) 20h - 7fh
# p4 = column (hi) 20h - 21h (only 132 col)
#ESC . p1 set cursor style:
# p1 = 0 invisible cursor
# p1 = 1 block blinking cursor
# p1 = 2 block steady cursor
# p1 = 3 underline blinking cursor
# p1 = 4 underline steady cursor
#ESC / transmit cursor location (page, row, column)
#ESC 0 p1 p2 p3 p4 program edit key:
# p1 = edit key code: '@'-'S', '`'-'s'
# p2 p3 p4 = program data (3 bytes)
#
#ESC 1 set tab
#ESC 2 clear tab at cursor
#ESC 3 clear all tabs
#ESC 4 send unprotect line to cursor
#ESC 5 send unprotect page to cursor
#ESC 6 send line to cursor
#ESC 7 send page to cursor
#ESC 8 n set scroll mode:
# n = 0 set jump scroll
# n = 1 set smooth scroll
#ESC 9 n control display:
# n = 0 display off
# n = 1 display on
#ESC : clear unprotected data to null
#ESC ; clear unprotected data to insert char
#
#ESC < keyclick on
#ESC = p1 p2 address cursor to row, column
# p1 = row 20h - 7fh
# p2 = column (lo) 20h - 7fh
# p3 = column (hi) 20h - 21h (only 132 col)
#ESC > keyclick off
#ESC ? transmit cursor location (row, column)
#
#ESC @ copy print mode on
#ESC A copy print mode off
#ESC B block mode on
#ESC C block mode off (conversation mode)
#ESC D F set full duplex
#ESC D H set half duplex
#ESC E line insert
#ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
# 0 = black, 1 = red, 2 = green, 3 = yellow
# 4 = blue, 5 = magenta, 6 = cyan, 7 = white
#ESC G n set serial field attribute (n = 30h - 3Fh)
#ESC H n full graphics mode:
# n = 0 exit full graphics mode
# n = 1 enter full graphics mode
#ESC I back tab
#ESC J back page
#ESC K forward page
#
#ESC L unformatted page print
#ESC M L move window left (132 col mode only)
#ESC M R move window right (132 col mode only)
#ESC N set page edit (clear line edit)
#ESC O set line edit (clear page edit)
#ESC P formatted page print
#ESC Q character insert
#ESC R line delete
#ESC S send message unprotected only
#ESC T erase line to insert char
#ESC U set monitor mode (see ESC X, ESC u)
#
#ESC V n select video attribute mode:
# n = 0 serial field attribute mode
# n = 1 parallel character attribute mode
#ESC V 2 n define line attribute:
# n = 0 single width single height
# n = 1 single width double height
# n = 2 double width single height
# n = 3 double width double height
#ESC V 3 n select character font:
# n = 0 system font
# n = 1 user defined font
#ESC V 4 n select screen mode:
# n = 0 page screen mode
# n = 1 virtual screen mode
#ESC V 5 n control mouse mode:
# n = 0 disable mouse
# n = 1 enable sample mode
# n = 2 send mouse information
# n = 3 enable request mode
#ESC W character delete
#ESC X clear monitor mode (see ESC U, ESC u)
#ESC Y erase page to insert char
#
#ESC Z n send user/status line:
# n = 0 send user line
# n = 1 send status line
# n = 2 send terminal ID
#ESC [ p1 p2 p3 set character attribute (parallel char mode):
# p1: 0 = normal
# 1 = blank
# 2 = blink
# 3 = blink blank (= blank)
# 4 = reverse
# 5 = reverse blank
# 6 = reverse blink
# 7 = reverse blink blank (= reverse blank)
# 8 = underline
# 9 = underline blank
# : = underline blink
# ; = underline blink blank
# < = reverse underline
# = = reverse underline blank
# > = reverse underline blink
# ? = reverse underline blink blank
# p2, p3: f/grnd, b/grnd colour
# (see ESC F for colours)
# use ZZ for mono, eg.
# ESC [ 0 Z Z for normal
# ESC [ 4 Z Z for inverse etc.
#
#ESC \ n set page size:
# n = 1 24 lines/page
# n = 2 48 lines/page
# n = 3 72 lines/page
# n = 4 96 lines/page
#ESC ] n set Wordstar mode:
# n = 0 normal (KDS7372) mode
# n = 1 Wordstar mode
#
#ESC b set foreground colour screen
#
#ESC c n enter self-test mode:
# n = 0 exit self test mode
# n = 1 ROM test
# n = 2 RAM test
# n = 3 NVRAM test
# n = 4 screen display test
# n = 5 main/printer port test
# n = 6 mouse port test
# n = 7 graphics board test
# n = 8 graphics memory test
# n = 9 display all 'E'
# n = : display all 'H'
#ESC d set background colour screen
#
#ESC e n program insert char (n = insert char)
#ESC f text CR load user status line with 'text'
#
#ESC g display user status line on 25th line
#ESC h display system status line on 25th line
#ESC i tab
#ESC j reverse linefeed
#ESC k n duplex/local edit mode:
# n = 0 duplex edit mode
# n = 1 local edit mode
#ESC l n select virtual screen:
# n = 0 screen 1
# n = 1 screen 2
#ESC m save current config to NVRAM
#ESC n p1 select display screen:
# p1 = 0 screen 1
# p1 = 1 screen 2
# p1 = 2 screen 3
# p1 = 3 screen 4
#ESC o p1 p2 set characters/line and attribute:
# p1 = 0 80 chars/line
#
#ESC o p1 p2 set characters/line and attribute:
# p1 = 0 80 chars/line
# p1 = 1 132 chars/line
# p2 = 0 single width single height
# p2 = 1 single width double height
# p2 = 2 double width single height
# p2 = 3 double width double height
#
#ESC q insert mode on
#ESC r edit mode on
#ESC s send message all
#ESC t erase line to null
#ESC u clear monitor mode (see ESC U, ESC X)
#ESC v autopage mode on
#ESC w autopage mode off
#ESC x p1 p2 p3 define delimiter code...
#ESC y erase page to null
#
#ESC z 2 p1 p2 p3 p4 draw quadrangle:
# p1 = starting row
# p2 = starting column
# p3 = end row
# p4 = end column
#
#ESC { p1 p2 p3 p4 configure main port
# (baud, stop bits, parity, word length)
#
#ESC | p1 p2 text Ctrl-Y program function key with 'text':
# p1 = function key code:
# '1' - ';' normal f1- f11
# '<' - 'F' shifted f1 - f11
# p2 = program mode:
# 1 = FDX
# 2 = LOC
# 3 = HDX
# Ctrl-Y = terminator
# (use Ctrl-P to escape ^P, ^Y )
#
#ESC } p1 p2 p3 p4 configure printer port
# (baud, stop bits, parity, word length)
#ESC ~ send system status
#
# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
#
# Entry is by esr going solely on above information and is UNTESTED.
# This actually looks a lot like a Televideo 9xx.
# This entry uses page 0 and is monochrome; I'm not brave enough to try
# to make color work without a test terminal. The <am> capability is a guess.
# The initialization string sets conversation mode, blinking underline cursor,
# full duplex, parallel attribute mode, display user status line, white
# foreground, black background, normal highlight.
#
icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
OTbs, am, hs,
cols#80, lines#24,
bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
cnorm=\E.3, cr=^M,
csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
hts=\E1, il1=\EE, invis=\E[1ZZ,
is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
rs2=\Eo1, use=icl6404,
#### Interactive Systems Corp
#
# ISC used to sell OEMed and customized hardware to support ISC UNIX.
# ISC UNIX still exists in 1995, but ISC itself is no more; they got
# bought out by Sun.
#
# From: <cithep!eric> Wed Sep 16 08:06:44 1981
# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
# ":le=^_:" later overridden -- esr)
intext|Interactive Systems Corporation modified owl 1200,
OTbs, am,
cols#80, it#8, lines#24, xmc#1,
bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
smso=^V$\,,
intext2|intextii|INTERACTIVE modified owl 1251,
am, bw, ul,
cols#80, lines#24, xmc#0,
bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J, el=\E[K,
flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
smul=\E[18 D,
#### Kimtron (abm, kt)
#
# Kimtron seems to be history, but as March 1998 these people are still
# offering repair services for Kimtron equipment:
#
# Com/Pair Monitor Service
# 1105 N. Cliff Ave.
# Sioux Falls, South Dakota 57103
#
# WATS voice: 1-800/398-4946
# POTS fax: +1 605/338-8709
# POTS voice: +1 605/338-9650
# Email: <compair@sd.cybernex.net>
# Internet/Web: <http://www.com-pair.com>
#
# Kimtron entries include (undocumented) codes for: enter dim mode,
# enter bold mode, enter reverse mode, turn off all attributes.
#
# Kimtron ABM 85 added by Dual Systems
# (abm85: removed duplicated ":kd=^J:" -- esr)
abm85|Kimtron ABM 85,
OTbs, am, bw, msgr,
cols#80, it#8, lines#24, xmc#1,
cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\Ey, el=\Et, ht=^I,
if=/usr/share/tabset/stdcrt, il1=\EE,
is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
# Kimtron ABM 85H added by Dual Systems.
# Some notes about the abm85h entries:
# 1) there are several firmware revs of 85H in the world. Use abm85h-old for
# firmware revs prior to SP51
# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
# abm85e entry if it is in tvi920 emulation mode. They are incompatible
# in some places and NOT software settable i.e., <is2> can't fix it)
# 3) In 85h mode, the arrow keys and special functions transmit when
# the terminal is in dup-edit, and work only locally in local-edit.
# Vi won't swallow `del char' for instance, but <smcup> turns on
# dup-edit anyway so that the arrow keys will work right. If the
# arrow keys don't work the way you like, change <smcup>, <rmcup>, and
# <is2>. Note that 920E mode does not have software commands to toggle
# between dup and local edit, so you get whatever was set last on the
# terminal.
# 4) <flash> attribute is nice, but seems too slow to work correctly
# (\Eb<pad>\Ed)
# 5) Make sure `hidden' attributes are selected. If `embedded' attributes
# are selected, the <xmc@> entry should be removed.
# 6) auto new-line should be on (selectable from setup mode only)
#
# From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
abm85h|Kimtron ABM 85H native mode,
hs,
xmc@,
bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
fsl=^M, invis@,
is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
use=abm85,
abm85e|Kimtron ABM 85H in 920E mode,
xmc@,
bel=^G, dim=\E), flash@,
is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
xmc@,
bel=^G, dim=\E),
is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
# From: <malman@bbn-vax.arpa>
# (kt7: removed obsolete :ma=^V^J^L :" -- esr)
kt7|kimtron model kt-7,
OTbs, am,
cols#80, it#8, lines#24,
cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
# other kt7 entry and the adjacent key capabilities). Removed EE which is
# identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
# but we can't figure out what.
kt7ix|kimtron model kt-7 or 70 in IX mode,
am, bw,
cols#80, it#8, lines#25,
acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
#### Microdata/MDIS
#
# This was a line of terminals made by McDonnell-Douglas Information Systems.
# These entries come direct from MDIS documentation. I have edited them only
# to move primary names of the form p[0-9] * to aliases, and to comment out
# <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
# also removed the change history; the last version indicates this is
# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
#
# McDonnell Information Systems Terminal Family History
# =========================================
#
# Prism-1, Prism-2 and P99:
# Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
#
# Prism-4 and Prism-5:
# Slightly less ancient range of Microdata terminals. Follow-on from
# Prism-2, but with many enhancements. P5 has eight display pages.
#
# Prism-6:
# A special terminal for use with library systems, primarily in Germany.
# Limited numbers. Similar functionality to P5 (except attributes?).
#
# Prism-7, Prism-8 and Prism-9:
# More recent range of MDIS terminals, in which P7 and P8
# replace the P4 & P5, with added functionality, and P9 is the flagship.
# The P9 has two emulation modes - P8 and ANSI - and includes a
# large number of the DEC VT220 control sequences. Both
# P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
#
# Prism-12 and Prism-14:
# Latest range, functionally very similar to the P9. The P14 has a
# black-on-white overscanning screen.
#
# The terminfo definitions given here are:
#
# p2 - Prism-2 (or Prism-1 or P99).
#
# p4 - Prism-4 (and older P7s & P8s).
# p5 - Prism-5 (or Prism-6).
#
# p7 - Prism-7.
# p8 - Prism-8 (in national or multinational mode).
# p8-w - 132 column version of p8.
# p9 - Prism-9 in ANSI mode.
# p9-w - 132 column version of p9.
# p9-8 - Prism-9 in Prism-8 emulation mode.
# p9-8-w - As p9-8, but with 132 columns.
#
# p12 - Prism-12 in ANSI mode.
# p12-w - 132 column version of p12.
# p12-m - Prism-12 in MDC emulation mode.
# p12-m-w - As p12-m, but with 132 columns.
# p14 - Prism-14 in ANSI mode.
# p14-w - 132 column version of p14.
# p14-m - Prism-14 in MDC emulation mode.
# p14-m-w - As p14-m, but with 132 columns.
#
# p2: Prism-2
# -----------
#
# Includes Prism-1 and basic P99 without SP or MP loaded.
# The simplest form of Prism-type terminal.
# Basic cursor movement and clearing operations only.
# No video attributes.
# Notes:
# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
# value up, followed by backspace.
#
prism2|MDC Prism-2,
am, bw, msgr,
cols#80, lines#24,
bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
cuu1=^Z, ed=\EJ, el=\EK, home=^A,
hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
# p4: Prism-4
# -----------
#
# Includes early versions of P7 & P8.
# Basic family definition for most Prisms (except P2 and P9 ANSI).
# Notes:
# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
# value up, followed by backspace.
# Cursor key definitions removed because they interfere with vi and csh keys.
#
prism4|p4|P4|MDC Prism-4,
am, bw, hs, mc5i, msgr,
cols#80, lines#24, wsl#72, xmc#1,
bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
fsl=^]\345, home=^A,
hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
rev=^CD, rmso=^C\s, rmul=^C\s,
sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
vpa=\013%p1%{32}%+%c,
# p5: Prism-5
# -----------
#
# Same definition as p4. Includes Prism-6 (not tested!).
# Does not use any multi-page features.
#
prism5|p5|P5|MDC Prism-5,
use=p4,
# p7: Prism-7
# -----------
#
# Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
# Notes:
# Use p4 for very early models of P7.
# Rev-index removed; can't send nulls to terminal in 8-bit modes.
#
prism7|p7|P7|MDC Prism-7,
cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
# p8: Prism-8
# -----------
#
# Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
# Supports national and multinational character sets.
# Notes:
# Alternate char set operations only work in multinational mode.
# Use p4 for very early models of P8.
# Rev-index removed; can't send nulls to terminal in 8-bit modes.
# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
#
prism8|p8|P8|MDC Prism-8,
cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
vpa=\E[%i%p1%dd, use=p4,
# p8-w: Prism-8 in 132 column mode
# --------------------------------
#
# 'Wide' version of p8.
# Notes:
# Rev-index removed; can't send nulls to terminal in 8-bit modes.
#
prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
cols#132,
is2=\E[<12h\E[<14h, use=p8,
# p9: Prism-9 in ANSI mode
# -------------------------
#
# The "flagship" model of this generation of terminals.
# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
# Notes:
# Tabs only reset by "reset". Otherwise assumes default (8 cols).
# Fixes to deal with terminal firmware bugs:
# . 'ri' uses insert-line since rev index doesn't always
# . 'sgr0' has extra '0' since esc[m fails
# . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
# Not covered in the current definition:
# . Labels
# . Programming Fn keys
# . Graphic characters (defaults correctly to vt100)
# . Padding values (sets xon)
# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
#
prism9|p9|P9|MDC Prism-9 in ANSII mode,
am, bw, hs, mc5i, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3, wsl#72,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
sc=\E[%y,
sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
tbc=\E[2g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
# p9-w: Prism-9 in 132 column mode
# --------------------------------
#
# 'Wide' version of p9.
#
prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
cols#132,
is2=\E[&p\E[<12l\E F\E[<14h,
rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
# p9-8: Prism-9 in P8 mode
# ------------------------
#
# P9 terminal in P8 emulation mode.
# Similar to p8 definition.
# Insertion and deletion operations possible.
#
prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
# p9-8-w: Prism-9 in P8 and 132 column modes
# ------------------------------------------
#
# P9 terminal in P8 emulation mode and 132 column mode.
#
prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
# p12: Prism-12 in ANSI mode
# ---------------------------
#
# See p9 definition.
#
prism12|p12|P12|MDC Prism-12 in ANSI mode,
use=p9,
# p12-w: Prism-12 in 132 column mode
# ----------------------------------
#
# 'Wide' version of p12.
#
prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
use=p9-w,
# p12-m: Prism-12 in MDC emulation mode
# -------------------------------------
#
# P12 terminal in MDC emulation mode.
# Similar to p8 definition.
# Insertion and deletion operations possible.
#
prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
use=p9-8,
# p12-m-w: Prism-12 in MDC emulation and 132 column modes
# -------------------------------------------------------
#
# P12 terminal in MDC emulation mode and 132 column mode.
#
prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
use=p9-8-w,
# p14: Prism-14 in ANSII mode
# ---------------------------
#
# See p9 definition.
#
prism14|p14|P14|MDC Prism-14 in ANSII mode,
use=p9,
# p14-w: Prism-14 in 132 column mode
# ----------------------------------
#
# 'Wide' version of p14.
#
prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
use=p9-w,
# p14-m: Prism-14 in MDC emulation mode
# -------------------------------------
#
# P14 terminal in MDC emulation mode.
# Similar to p8 definition.
# Insertion and deletion operations possible.
#
prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
use=p9-8,
# p14-m-w: Prism-14 in MDC emulation and 132 column modes
# -------------------------------------------------------
#
# P14 terminal in MDC emulation mode and 132 column mode.
#
prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
use=p9-8-w,
# End of McDonnell Information Systems Prism definitions
# These things were popular in the Pick database community at one time
# From: George Land <georgeland@aol.com> 24 Sep 1996
p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
am, bw, hs, mir,
cols#80, lines#24, ma#1, wsl#78, xmc#1,
bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
smul=^C0,
#### Microterm (act, mime)
#
# The mime1 entries refer to the Microterm Mime I or Mime II.
# The default mime is assumed to be in enhanced act iv mode.
#
# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
# freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
# <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
# since Sytek insists ^S means xoff.
# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
act4|microterm|microterm act iv,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
kcuu1=^Z,
# The padding on :sr: and :ta: for act5 and mime is a guess and not final.
# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
act5|microterm5|microterm act v,
kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
use=act4,
# Mimes using brightness for standout. Half bright is really dim unless
# you turn up the brightness so far that lines show up on the screen.
mime-fb|full bright mime1,
is2=^S\E, rmso=^S, smso=^Y, use=mime,
mime-hb|half bright mime1,
is2=^Y\E, rmso=^Y, smso=^S, use=mime,
# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
# the more plausible ":do=^J:" -- esr)
# uc was at one time disabled to get around a curses bug, be wary of it
mime|mime1|mime2|mimei|mimeii|microterm mime1,
OTbs, am,
cols#80, it#8, lines#24, vt#9,
bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
# These termcaps (for mime2a) put the terminal in low intensity mode
# since high intensity mode is so obnoxious.
mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
smir=\EE, smso=\E\:, smul=\E6,
# This is the preferred mode (but ^X can't be used as a kill character)
mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
OTbs,
cols#80, it#8, lines#24,
bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
rmul=\E5, smir=^O, smso=\E8, smul=\E4,
# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
mime3a|mime1 emulating 3a,
am@,
kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
mime3ax|mime-3ax|mime1 emulating enhanced 3a,
it#8,
dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
use=mime3a,
# Wed Mar 9 18:53:21 1983
# We run our terminals at 2400 baud, so there might be some timing problems at
# higher speeds. The major improvements in this model are the terminal now
# scrolls down and insert mode works without redrawing the rest of the line
# to the right of the cursor. This is done with a bit of a kludge using the
# exit graphics mode to get out of insert, but it does not appear to hurt
# anything when using vi at least. If you have some users using act4s with
# programs that use curses and graphics mode this could be a problem.
mime314|mm314|mime 314,
am,
cols#80, lines#24,
clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
# Microterm mime 340 from University of Wisconsin
mm340|mime340|mime 340,
cols#80, lines#24,
clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
# This came from University of Wisconsin marked "astro termcap for jooss".
# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
# also added <rmam>/<smam> based on the init string -- esr)
mt4520-rv|micro-term 4520 reverse video,
am, hs, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
tbc=\E[g, tsl=\E[25;1H,
# Fri Aug 5 08:11:57 1983
# This entry works for the ergo 4000 with the following setups:
# ansi,wraparound,newline disabled, xon/xoff disabled in both
# setup a & c.
#
# WARNING!!! There are multiple versions of ERGO 4000 microcode
# Be advised that very early versions DO NOT WORK RIGHT !!
# Microterm does have a ROM exchange program- use it or lose big
# (ergo400: added <rmam>/<smam> based on the init string -- esr)
ergo4000|microterm ergo 4000,
da, db, msgr,
cols#80, lines#66,
bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
smso=\E[7m$<20>,
#### NCR
#
# NCR's terminal group was merged with AT&T's when AT&T bought the company.
# For what happened to that group, see the ADDS section.
#
# There is an NCR4103 terminal that's just a re-badged Wyse-50.
#
# The following vendor-supplied termcaps were captured from the Boundless
# Technologies site, 8 March 1998. I removed all-upper-case names that were
# identical, except for case, to lower-case ones. I also uncommented the acsc
# capabilities.X
#
# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC vt200/300 with color capabilities added.
ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
use=ncr260vt300an,
# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC vt200/300 with color capabilities added.
ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
use=ncr260vt300wan,
# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC vt200/300 with color capabilities added.
ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
use=ncr260vt300pp,
# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
# DEC vt200/300 with color capabilities added.
ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
use=ncr260vt300wpp,
# This definition for ViewPoint supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
# attributes can be removed.
# Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
ncr260vppp|NCR 2900_260 viewpoint,
am, bw, hs, km, mc5i, mir, msgr, xon,
cols#80, lines#24, nlab#32, xmc#1,
acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
cols#132,
cup=\Ea%i%p1%dR%p2%dC$<30>,
is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
use=ncr260vppp,
ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
am, hs, mir, msgr, xenl, xon,
cols#80, lines#24, nlab#32,
acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
invis=\E[8m,
is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
cols#132,
cup=\E[%i%p1%d;%p2%dH$<30>,
is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
use=ncr260vt100an,
ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
smkx=\E=, use=ncr260vt100an,
ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
cols#132,
cup=\E[%i%p1%d;%p2%dH$<30>,
is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
use=ncr260vt100pp,
ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
am, hs, mir, msgr, xenl, xon,
cols#80, lines#24, nlab#32,
acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
use=vt220+keypad,
ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
cols#132,
cup=\E[%i%p1%d;%p2%dH$<30>,
is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
use=ncr260vt200an,
ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
use=ncr260vt200an,
ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
cols#132,
cup=\E[%i%p1%d;%p2%dH$<30>,
is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
use=ncr260vt200pp,
ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
am, hs, mir, msgr, xenl, xon,
cols#80, lines#24, nlab#32,
acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m,
rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
use=vt220+keypad,
ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
cols#132,
cup=\E[%i%p1%d;%p2%dH$<30>,
is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
use=ncr260vt300an,
ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
use=ncr260vt300an,
NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
cols#132,
cup=\E[%i%p1%d;%p2%dH$<30>,
is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
use=ncr260vt300pp,
# This terminfo file contains color capabilities for the Wyse325 emulation of
# the NCR 2900/260C color terminal. Because of the structure of the command
# (escape sequence) used to set color attributes, one of the fore/background
# colors must be preset to a given value. I have set the background color to
# black. The user can change this setup by altering the last section of the
# 'setf' definition. The escape sequence to set color attributes is
# ESC d y <foreground_color> <background_color> 1
# In addition, the background color can be changed through the desk accessories.
# The capablitiy 'op' sets colors to green on black (default combination).
#
# NOTE: The NCR Unix System Administrator's Shell will not function properly
# if the 'pairs' capability is defined. Un-Comment the 'pairs'
# capability and recompile if you wish to have it included.
#
ncr260wy325pp|NCR 2900_260 wyse 325,
am, bw, hs, km, mc5i, mir, msgr, xon,
colors#16, cols#80, lines#24, ncv#33, nlab#32,
acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
setb=\s,
setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
tsl=\EF,
ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
cols#132,
cup=\Ea%i%p1%dR%p2%dC$<30>,
is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
use=ncr260wy325pp,
# This definition for Wyse 350 supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
# attributes can be removed.
# Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
# In addition, color capabilities have been added to this file. The drawback,
# however, is that the background color has to be black. The foreground colors
# are numbered 0 through 15.
#
# NOTE: The NCR Unix System Administrator's Shell does not function properly
# with the 'pairs' capability defined as below. If you wish to
# have it included, Un-comment it and recompile (using 'tic').
#
ncr260wy350pp|NCR 2900_260 wyse 350,
am, bw, hs, km, mc5i, mir, msgr, xon,
colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
mc0=\EP$<10>, mc4=^T, mc5=^R,
mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
setb=\s,
setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
tsl=\EF,
ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
cols#132,
cup=\Ea%i%p1%dR%p2%dC$<30>,
is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
use=ncr260wy350pp,
# This definition for Wyse 50+ supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
# attributes can be removed.
# Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
# (ncr260wy50+pp: originally contained commented-out
# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
ncr260wy50+pp|NCR 2900_260 wyse 50+,
am, bw, hs, km, mc5i, mir, msgr, xon,
cols#80, lines#24, nlab#32, xmc#1,
acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
invis=\EG1,
is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
mc0=\EP$<10>, mc4=^T, mc5=^R,
mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
cols#132,
cup=\Ea%i%p1%dR%p2%dC$<30>,
is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
use=ncr260wy50+pp,
ncr260wy60pp|NCR 2900_260 wyse 60,
am, bw, hs, km, mc5i, mir, msgr, xon,
cols#80, lines#24, nlab#32,
acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
invis=\EG1,
is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
tsl=\EF,
ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
cols#132,
cup=\Ea%i%p1%dR%p2%dC$<30>,
is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
use=ncr260wy60pp,
ncr160vppp|NCR 2900_160 viewpoint,
use=ncr260vppp,
ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
use=ncr260vpwpp,
ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
use=ncr260vt100an,
ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
use=ncr260vt100pp,
ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
use=ncr260vt100wan,
ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
use=ncr260vt100wpp,
ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
use=ncr260vt200an,
ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
use=ncr260vt200pp,
ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
use=ncr260vt200wan,
ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
use=ncr260vt200wpp,
ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
use=ncr260vt300an,
ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
use=ncr260vt300pp,
ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
use=ncr260vt300wan,
ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
use=ncr260vt300wpp,
ncr160wy50+pp|NCR 2900_160 wyse 50+,
use=ncr260wy50+pp,
ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
use=ncr260wy50+wpp,
ncr160wy60pp|NCR 2900_160 wyse 60,
use=ncr260wy60pp,
ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
use=ncr260wy60wpp,
ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
am, hs, mc5i, mir, msgr, xon,
cols#80, it#8, lines#24, nlab#32,
acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
clear=\E[2J\E[1;1H$<300>, cr=^M,
csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
ind=\ED,
is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
tsl=\E[>+1$<70>,
ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
cols#132,
is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
use=ncrvt100an,
#
# Vendor-supplied NCR termcaps end here
# NCR7900 DIP switches:
#
# Switch A:
# 1-4 - Baud Rate
# 5 - Parity (Odd/Even)
# 6 - Don't Send or Do Send Spaces
# 7 - Parity Enable
# 8 - Stop Bits (One/Two)
#
# Switch B:
# 1 - Upper/Lower Shift
# 2 - Typewriter Shift
# 3 - Half Duplex / Full Duplex
# 4 - Light/Dark Background
# 5-6 - Carriage Return Without / With Line Feed
# 7 - Extended Mode
# 8 - Suppress Keyboard Display
#
# Switch C:
# 1 - End of line entry disabled/enabled
# 2 - Conversational mode / (Local?) Mode
# 3 - Control characters displayed / not displayed
# 4 - (2-wire?) / 4-wire communications
# 5 - RTS on and off for each character
# 6 - (50Hz?) / 60 Hz
# 7 - Exit after level zero diagnostics
# 8 - RS-232 interface
#
# Switch D:
# 1 - Reverse Channel (yes / no)
# 2 - Manual answer (no / yes)
# 3-4 - Cursor appearance
# 5 - Communication Rate
# 6 - Enable / Disable EXT turnoff
# 7 - Enable / Disable CR turnoff
# 8 - Enable / Disable backspace
#
# Since each attribute parameter is 0 or 1, we shift each attribute (standout,
# reverse, blink, dim, and underline) the appropriate number of bits (by
# multiplying the 0 or 1 by a correct factor to shift) so the bias character,
# '@' is (effectively) "or"ed with each attribute to generate the proper third
# character in the <ESC>0 sequence. The <sgr> string implements the following
# equation:
#
# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
#
# Where: P1 <==> Standout attribute parameter
# P2 <==> Underline attribute parameter
# P3 <==> Reverse attribute parameter
# P4 <==> Blink attribute parameter
# P5 <==> Dim attribute parameter
# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
ncr7900i|ncr7900|ncr 7900 model 1,
am, bw, ul,
cols#80, lines#24, xmc#1,
bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
rmul=\E0@,
sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
sgr0=\E0@, smso=\E0Q, smul=\E0`,
ncr7900iv|ncr 7900 model 4,
am, bw, eslok, hs,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
# Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
# The user can enter a CTRL-B to get out of this locked state.
# In <hpa>, we want to output the character given by the formula:
# ((col / 10) * 16) + (col % 10) where "col" is "p1"
ncr7901|ncr 7901 model,
am, bw, ul,
cols#80, lines#24,
bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
cub1=^H, cud1=^J, cuf1=^F,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
ed=\Ek, el=\EK,
hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
vpa=\013%p1%{64}%+%c,
# Newbury Data Recording Limited (Newbury Data)
#
# Have been manufacturing and reselling various peripherals for a long time
# They don't make terminals anymore, but are still in business (in 2007).
# Their e-mail address is at ndsales@newburydata.co.uk
# and their post address is:
#
# Newbury Data Recording Ltd,
# Premier Park, Road One,
# Winsford, Cheshire, CW7 3PT
#
# Their technical support is still good, they sent me for free a printed copy
# of the 9500 user manual and I got it just 1 week after I first contacted them
# (in 2005)!
# NDR 9500
# Manufactured in the early/mid eighties, behaves almost the same as a
# Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
# keep the same keyboard layout), add an optional 25-line mode, replace the DIP
# switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
# 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
# recognized: if you type in "ESC !", the next (third) character is not
# echoed, showing that the terminal was actually waiting for a parameter!
ndr9500|nd9500|Newbury Data 9500,
am, bw, hs, mc5i, mir, msgr, ul, xon,
cols#80, lines#24, wsl#79,
acsc=qKnImAjDwNuLtMvOlBkCxJ, bel=^G, cbt=\EI, civis=\E.0,
clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
pfloc=\E|%{48}%p1%+%c2%p2\031,
pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
sgr=\E%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
ndr9500-nl|NDR 9500 with no status line,
hs@,
wsl@,
dsl@, fsl@, tsl@, use=ndr9500,
ndr9500-25|NDR 9500 with 25th line enabled,
lines#25, use=ndr9500,
ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
lines#25, use=ndr9500-nl,
ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
msgr@,
xmc#1,
blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
lines#25, use=ndr9500-mc,
ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
hs@,
wsl@,
dsl@, fsl@, tsl@, use=ndr9500-mc,
ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
lines#25, use=ndr9500-mc-nl,
#### Perkin-Elmer (Owl)
#
# These are official terminfo entries from within Perkin-Elmer.
#
bantam|pe550|pe6100|perkin elmer 550,
OTbs,
cols#80, lines#24,
bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
fox|pe1100|perkin elmer 1100,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
owl|pe1200|perkin elmer 1200,
OTbs, am, in,
cols#80, lines#24,
bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
pe1251|pe6300|pe6312|perkin elmer 1251,
am,
cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
# (pe7000m: this had
# rmul=\E!\0, smul=\E!\040,
# which is probably wrong, it collides with kf0
pe7000m|perkin elmer 7000 series monochrome monitor,
am,
cols#80, lines#24,
bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
ed=\EJ, el=\EI, home=\EH, ind=^J,
is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
ll=\ES7\s, ri=\ER,
pe7000c|perkin elmer 7000 series colour monitor,
is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
#### Sperry Univac
#
# Sperry Univac has merged with Burroughs to form Unisys.
#
# This entry is for the Sperry UTS30 terminal running the TTY
# utility under control of CP/M Plus 1R1. The functionality
# provided is comparable to the DEC vt100.
# (uts30: I added <rmam>/<smam> based on the init string -- esr)
uts30|sperry uts30 with cp/m@1R1,
am, bw, hs,
cols#80, lines#24, wsl#40,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
smul=\E[4m, tsl=\E], uc=\EPB,
#### Tandem
#
# Tandem builds these things for use with its line of fault-tolerant
# transaction-processing computers. They aren't generally available
# on the merchant market, and so are fairly uncommon.
#
tandem6510|adm3a repackaged by Tandem,
use=adm3a,
# A funny series of terminal that TANDEM uses. The actual model numbers
# have a fourth digit after 653 that designates minor variants. These are
# natively block-mode and rather ugly, but they have a character mode which
# this doubtless(?) exploits. There is a 6520 that is slightly dumber.
# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
# removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
tandem653|t653x|Tandem 653x multipage terminal,
OTbs, am, da, db, hs,
cols#80, lines#24, wsl#64, xmc#1,
clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
#### Tandy/Radio Shack
#
# Tandy has a line of VDTs distinct from its microcomputers.
#
dmterm|deskmate terminal,
am, bw,
cols#80, lines#24,
bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
use=adm+sgr,
dt100|dt-100|Tandy DT-100 terminal,
xon,
cols#80, lines#24, xmc#1,
acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
cols#132, use=dt100,
dt110|Tandy DT-110 emulating ansi,
xon,
cols#80, lines#24,
acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C,
cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P,
dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smacs=^N, smso=\E[7m, smul=\E[4m,
pt210|TRS-80 PT-210 printing terminal,
hc, os,
cols#80,
bel=^G, cr=^M, cud1=^J, ind=^J,
#### Tektronix (tek)
#
# Tektronix tubes are graphics terminals. Most of them use modified
# oscilloscope technology incorporating a long-persistence green phosphor,
# and support vector graphics on a main screen with an attached "dialogue
# area" for interactive text.
#
tek|tek4012|tektronix 4012,
OTbs, os,
cols#75, lines#35,
bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
ff=\014$<1000>, is2=\E^O,
# (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
tek4013|tektronix 4013,
acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
tek4014|tektronix 4014,
cols#81, lines#38,
is2=\E\017\E9, use=tek4012,
# (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
tek4015|tektronix 4015,
acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
tek4014-sm|tektronix 4014 in small font,
cols#121, lines#58,
is2=\E\017\E\:, use=tek4014,
# (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
tek4015-sm|tektronix 4015 in small font,
acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
#
# You need to have "stty nl2" in effect. Some versions of tset(1) know
# how to set it for you.
#
# It's got the Magic Cookie problem around stand-out mode. If you can't
# live with Magic Cookie, remove the :so: and :se: fields and do without
# reverse video. If you like reverse video stand-out mode but don't want
# it to flash, change the letter 'H' to 'P' in the :so: field.
tek4023|tektronix 4023,
OTbs, am,
OTdN#4, cols#80, lines#24, vt#4, xmc#1,
OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
rmso=^_@, smso=^_P,
# It is recommended that you run the 4025 at 4800 baud or less;
# various bugs in the terminal appear at 9600. It wedges at the
# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
# on keyboard don't work. You have to hit BREAK twice to get
# one break at any speed - this is a documented feature.
# Can't use cursor motion because it's memory relative, and
# because it only works in the workspace, not the monitor.
# Same for home. Likewise, standout only works in the workspace.
#
# <el> was commented out since vi and rogue seem to work better
# simulating it with lots of spaces!
#
# <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
# and didn't seem necessary.
#
tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
OTbs, am, da, db,
cols#80, it#8, lines#34, lm#0,
bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
ind=^F^J,
is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
tek4025-17|tek 4025 17 line window,
lines#17, use=tek4025,
tek4025-17-ws|tek 4025 17 line window in workspace,
is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
smso=\037att e\r, use=tek4025-17,
tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
# Tektronix 4025a
# From: Doug Gwyn <gwyn@brl-smoke.ARPA>
# The following status modes are assumed for normal operation (replace the
# initial "!" by whatever the current command character is):
# !COM 29 # NOTE: changes command character to GS (^])
# ^]DUP
# ^]ECH R
# ^]EOL
# ^]RSS T
# ^]SNO N
# ^]STO 9 17 25 33 41 49 57 65 73
# Other modes may be set according to communication requirements.
# If the command character is inadvertently changed, termcap can't restore it.
# Insert-character cannot be made to work on both top and bottom rows.
# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
# There also seems to be a problem with vertical motion, perhaps involving
# delete/insert-line, following a typed carriage return. This terminal sucks.
# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
# work any more. -- esr)
tek4025a|Tektronix 4025A,
OTbs, OTpt, am, bw, da, db, xon,
cols#80, it#8, lines#34,
bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
tbc=\035sto;,
# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
# Here's the command file that I use to get rogue to work on the 4025.
# It should work with any program using the old curses (e.g. it better
# not try to scroll, or cursor addressing won't work. Also, you can't
# see the cursor.)
# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
tek4025-cr|tek 4025 for curses and rogue,
OTbs, am,
cols#80, it#8, lines#33,
clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
rmcup=\037wor 0, smcup=\037wor 33h,
# next two lines commented out since curses only allows 128 chars, sigh.
# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
tek4025ex|4025ex|4027ex|tek 4025 w/!,
is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
tek4105|tektronix 4105,
OTbs, am, mir, msgr, ul, xenl, xt,
cols#79, it#8, lines#29,
acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
smul=\E[=5;<2m, tbc=\E[1g,
# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
tek4105-30|4015 emulating 30 line vt100,
am, mir, msgr, xenl, xon,
cols#80, it#8, lines#30, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
use=vt100+fnkeys,
# Tektronix 4105 from BRL
# The following setup modes are assumed for normal operation:
# CODE ansi CRLF no DABUFFER 141
# DAENABLE yes DALINES 30 DAMODE replace
# DAVISIBILITY yes ECHO no EDITMARGINS 1 30
# FLAGGING input INSERTREPLACE replace LFCR no
# ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
# SELECTCHARSET G1 0 TABS -2
# Other setup modes may be set for operator convenience or communication
# requirements; I recommend
# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
# GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
# PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
# XMTDELAY 0
# and factory color maps. After setting these modes, save them with NVSAVE. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# "IC" cannot be used in combination with "im" & "ei".
# "tek4105a" is just a guess:
tek4105a|Tektronix 4105,
OTbs, OTpt, msgr, xon,
OTkn#8, cols#80, it#8, lines#30, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
#
# Tektronix 4106/4107/4109 from BRL
# The following setup modes are assumed for normal operation:
# CODE ansi COLUMNMODE 80 CRLF no
# DABUFFER 141 DAENABLE yes DALINES 32
# DAMODE replace DAVISIBILITY yes ECHO no
# EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
# LFCR no LOCKKEYBOARD no ORIGINMODE relative
# PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
# TABS -2
# Other setup modes may be set for operator convenience or communication
# requirements; I recommend
# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
# GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
# PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
# XMTDELAY 0
# and factory color maps. After setting these modes, save them with NVSAVE. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# "IC" cannot be used in combination with "im" & "ei".
tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
msgr, xon,
cols#80, it#8, lines#32, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
tek4107|tek4109|tektronix terminals 4107 4109,
OTbs, am, mir, msgr, ul, xenl, xt,
cols#79, it#8, lines#29,
bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0,
sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
smul=\E%!1\E[4m$<2>\E%!0,
# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
# see the note attached to tek4207.
tek4207-s|Tektronix 4207 with sysline but no memory,
eslok, hs,
dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
is2=\E7\E[?6l\E[2K\E[?6h\E8,
tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
# The 4110 series may be a wonderful graphics series, but they make the 4025
# look good for screen editing. In the dialog area, you can't move the cursor
# off the bottom line. Out of the dialog area, ^K moves it up, but there
# is no way to scroll.
#
# Note that there is a floppy for free from Tek that makes the
# 4112 emulate the vt52 (use the vt52 termcap). There is also
# an expected enhancement that will use ANSI standard sequences.
#
# 4112 in non-dialog area pretending to scroll. It really wraps
# but vi is said to work (more or less) in this mode.
#
# 'vi' works reasonably well with this entry.
#
otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
am,
cols#80, lines#34,
bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
# The 4112 with the ANSI compatibility enhancement
tek4112|tek4114|tektronix 4110 series,
OTbs, am, db,
cols#80, lines#34,
cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M,
ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
tek4112-nd|4112 not in dialog area,
OTns,
cuu1=^K, use=tek4112,
tek4112-5|4112 in 5 line dialog area,
lines#5, use=tek4112,
# (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
# removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
# Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
# previously \0410 and \0411 sequences...I don't *think* they were supposed
# to be 4-digit octal -- esr)
tek4113|tektronix 4113 color graphics with 5 line dialog area,
OTbs, am, da, eo,
cols#80, lines#5,
clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
lines#34,
is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
# :vb: needs enough delay to let you see the background color being toggled.
tek4113-nd|tektronix 4113 color graphics with no dialog area,
OTbs, am, eo,
cols#80, it#8, lines#34,
clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
cvvis=\ELZ\EKA0,
flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
# This entry is from Tek. Inc. (Brian Biehl)
# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
otek4115|Tektronix 4115,
OTbs, am, da, db, eo,
cols#80, it#8, lines#34,
cbt=\E[Z, clear=\E[H\E[2J,
cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
il1=\E[L,
is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
kbs=^H, ri=\EM, rmam=\E[?7l,
rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
smul=\E[4m,
tek4115|newer tektronix 4115 entry with more ANSI capabilities,
am, xon,
cols#80, lines#34,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
rmso=\E[m, rmul=\E[m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
vpa=\E[%p1%{1}%+%dd,
# The tek4125 emulates a vt100 incorrectly - the scrolling region
# command is ignored. The following entry replaces <csr> with the needed
# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
# chokes on; and adds a lot of initialization for the tek dialog area.
# Note that this entry uses all 34 lines and sets the cursor color to green.
# Steve Jacobson 8/85
# (tek4125: there were two "\!"s in the is that I replaced with "\E!";
# commented out, <smir>=\E1 because there's no <rmir> -- esr)
tek4125|tektronix 4125,
lines#34,
csr@, dl1=\E[1M, il1=\E[1L,
is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rc@, sc@, smkx=\E=, use=vt100,
# From: <jcoker@ucbic>
# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
# supplied another, less capable 4107 entry. So we'll use that for 4107 and
# note that if jcoker wasn't confused you may be able to use this one.
# I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
tek4207|Tektronix 4207 graphics terminal with memory,
am, bw, mir, msgr, ul, xenl,
cols#80, it#8, lines#32,
blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
rev=\E[7m, ri=\E[T,
rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
smul=\E[4m, tbc=\E[1g,
# From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
# (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
# Tab had been given as \E2I,that must be the tab-set capability -- esr)
tek4404|tektronix 4404,
OTbs,
cols#80, it#8, lines#32,
blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
# Some unknown person wrote:
# I added the is string - straight Unix has ESC ; in the login
# string which sets a ct8500 into monitor mode (aka 4025 snoopy
# mode). The is string here cleans up a few things (but not
# everything).
ct8500|tektronix ct8500,
am, bw, da, db,
cols#80, lines#25,
bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
# Tektronix 4205 terminal.
#
# am is not defined because the wrap around occurs not when the char.
# is placed in the 80'th column, but when we are attempting to type
# the 81'st character on the line. (esr: hmm, this is like the vt100
# version of xenl, perhaps am + xenl would work!)
#
# Bold, dim, and standout are simulated by colors and thus not allowed
# with colors. The tektronix color table is mapped into the RGB color
# table by setf/setb. All colors are reset to factory specifications by oc.
# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
# interval then maps into pre-defined value.
tek4205|tektronix 4205,
ccc, mir, msgr,
colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
kf7=\ES,
oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
smul=\E[4m, tbc=\E[1g,
#### Teletype (tty)
#
# These are the hardcopy Teletypes from before AT&T bought the company,
# clattering electromechanical dinosaurs in Bakelite cases that printed on
# pulpy yellow roll paper. If you remember these you go back a ways.
# Teletype-branded VDTs are listed in the AT&T section.
#
# The earliest UNIXes were designed to use these clunkers; nroff and a few
# other programs still default to emitting codes for the Model 37.
#
tty33|tty35|model 33 or 35 teletype,
hc, os, xon,
cols#72,
bel=^G, cr=^M, cud1=^J, ind=^J,
tty37|model 37 teletype,
OTbs, hc, os, xon,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
ind=^J,
# There are known to be at least three flavors of the tty40, all seem more
# like IBM half duplex forms fillers than ASCII terminals. They have lots of
# awful braindamage, such as printing a visible newline indicator after each
# newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
# braindamaged but has hope and is described here. The 40-4 is a 3270
# lookalike and beyond hope. The terminal has visible bell but I don't know
# it - it's null here to prevent it from showing the BL character.
# There is an \EG in <nl> because of a bug in old vi (if stty says you have
# a "newline" style terminal (-crmode) vi figures all it needs is nl
# to get crlf, even if <cr> is not ^M.)
# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
OTbs, xon,
cols#80, lines#24,
clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
tty43|model 43 teletype,
OTbs, am, hc, os, xon,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
#### Tymshare
#
# You can add <is2=\E<> to put this 40-column mode, though I can't
# for the life of me think why anyone would want to.
scanset|sc410|sc415|Tymshare Scan Set,
am, bw, msgr,
cols#80, lines#24,
acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
#### Volker-Craig (vc)
#
# If you saw a Byte Magazine cover with a terminal on it during the early
# 1980s, it was probably one of these. Carl Helmers liked them because
# they could crank 19.2 and were cheap (that is, he liked them until he tried
# to program one...)
#
# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
# every other linefeed.
vc303|vc103|vc203|volker-craig 303,
OTbs, OTns, am,
cols#80, lines#24,
bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
kcuu1=^N, ll=\017$<1>W,
vc303a|vc403a|volker-craig 303a,
clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
vc404|volker-craig 404,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
vc404-s|volker-craig 404 w/standout mode,
cud1=^J, rmso=^O, smso=^N, use=vc404,
# From: <wolfgang@cs.sfu.ca>
# (vc414: merged in cup/dl1/home from an old vc414h-noxon)
vc414|vc414h|Volker-Craig 414H in sane escape mode.,
OTbs, am,
cols#80, lines#24,
clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
rmso=\E^_, smso=\E^Y,
vc415|volker-craig 415,
clear=^L, use=vc404,
######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
#
#### IBM PC and clones
#
# The pcplot IBM-PC terminal emulation program is really messed up. It is
# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
# doesn't support scrolling regions, ignores add line commands, and ignores
# delete line commands. Consequently, the resulting behavior looks like a
# crude adm3a-type terminal.
# Steve Jacobson 8/85
pcplot|pc-plot terminal emulation program,
xenl@,
csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
# I've found that my KayPro II, running MDM730, continues to emulate an
# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
# system the following termcap entry works well:
# I have noticed a couple of minor glitches, but nothing I can't work
# around. (I added two capabilities from the BRL entry -- esr)
kaypro|kaypro2|kaypro II,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
# From IBM, Thu May 5 19:35:27 1983
# (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
OTbs, am,
cols#80, lines#24,
bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
OTbs, am, bw, eo, hs, km, msgr, ul,
cols#80, it#8, lines#24,
acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
sgr0=\E[m, smso=\E[7m, smul=\E[4m,
#### Apple II
#
# Apple II firmware console first, then various 80-column cards and
# terminal emulators. For two cents I'd toss all these in the UFO file
# along with the 40-column apple entries.
#
# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
# 'it#8' tells UNIX that you have tabs every 8 columns. This is a
# function of TIC, not the firmware.
# The clear key on a IIgs will do something like clear-screen,
# depending on what you're in.
appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
OTbs, am, bw, eo, msgr,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
smso=^O,
# Apple //e with 80-column card, entry from BRL
# The modem interface is permitted to discard LF (maybe DC1), otherwise
# passing characters to the 80-column firmware via COUT (PR#3 assumed).
# Auto-wrap does not work right due to newline scrolling delay, which also
# requires that you set "stty cr2".
# Note: Cursor addressing is only available via the Pascal V1.1 entry,
# not via the BASIC PR#3 hook. All this nonsense can be avoided only by
# using a terminal emulation program instead of the built-in firmware.
apple2e|Apple //e,
bw, msgr,
cols#80, lines#24,
bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
smso=^O,
# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
# 4.20, with incoming and outgoing terminals both on 0, emulation On.
apple2e-p|Apple //e via Pascal,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
kcud1=^J, use=apple2e,
# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
# Enable DC3/DC1 flow control with "stty ixon -ixany".
apple-ae|ASCII Express,
OTbs, am, bw, msgr, nxon, xon,
cols#80, it#8, lines#24,
bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
smso=^O,
appleII|apple ii plus,
OTbs, am,
cols#80, it#8, lines#24,
clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
smso=^O,
# Originally by Gary Ford 21NOV83
# From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
apple-80|apple II with smarterm 80 col,
OTbs, am, bw,
cols#80, lines#24,
cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
ed=\013$<10*/>, el=\035$<10/>, home=^Y,
apple-soroc|apple emulating soroc 120,
am,
cols#80, lines#24,
bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
# From Peter Harrison, Computer Graphics Lab, San Francisco
# ucbvax!ucsfmis!harrison .....uucp
# ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
# "These two work. If you don't have the inverse video chip for the
# Apple with videx then remove the :so: and :se: fields."
# (apple-videx: this used to be called DaleApple -- esr)
apple-videx|Apple with videx videoterm 80 column board with inverse video,
OTbs, am, xenl,
cols#80, it#8, lines#24,
clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
rmso=^Z2, sgr0=^Z2, smso=^Z3,
# My system [for reference] : Apple ][+, 64K, Ultraterm display card,
# Apple Cat ][ 212 modem, + more all
# controlled by ASCII Express: Pro.
# From Dave Shaver <isucs1!shaver>
apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
OTbs, am, eo, xt,
cols#80, lines#24,
acsc=, clear=^L, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
flash=^W35^W06, home=^Y,
is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
rmso=^N, smso=^O,
apple-uterm|Ultraterm for Apple micros,
OTbs, am, eo, xt,
cols#80, lines#24,
acsc=, clear=^L, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
# from trwrba!bwong (Bradley W. Wong):
#
# This entry assumes that you are using an apple with the UCSD Pascal
# language card. SYSTEM.MISCINFO is assumed to be the same as that
# supplied with the standard apple except that screenwidth should be set
# using SETUP to 80 columns. Note that the right arrow in not mapped in
# this termcap entry. This is because that key, on the Apple, transmits
# a ^U and would thus preempt the more useful "up" function of vi.
#
# HMH 2/23/81
apple80p|80-column apple with Pascal card,
am, bw,
cols#80, lines#24,
clear=^Y^L, cuf1=^\\:,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, kcub1=^H,
#
# Apple II+ equipped with Videx 80 column card
#
# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
# manually converted by D A Gwyn
#
# DO NOT use any terminal emulation with this data base, it works directly
# with the Videx card. This has been tested with vi 1200 baud and works fine.
#
# This works great for vi, except I've noticed in pre-R2, ^U will scroll back
# 1 screen, while in R2 ^U doesn't.
# For inverse alternate character set add:
# <smacs>=^O:<rmacs>=^N:
# (apple-v: added it#8 -- esr)
apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
am, xenl,
cols#80, it#8, lines#24,
bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
khome=^Y, rmso=^Z2, smso=^Z3,
apple-videx3|vapple|Apple II with 80 col card,
OTbs, am,
cols#80, lines#24,
clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
aepro|Apple II+ running ASCII Express Pro--vt52,
OTbs,
cols#80, lines#24,
clear=\014$<300/>, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, home=\EH,
# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
apple-vm80|ap-vm80|apple with viewmax-80,
OTbs,
cols#80, lines#24,
clear=\014$<300/>, cuf1=^\\:,
cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
ed=\013$<300/>, el=^], home=\031$<200/>,
#### Apple Lisa & Macintosh
#
# (lisa: changed <cvvis> to <cnorm> -- esr)
lisa|apple lisa console display (black on white),
OTbs, am, eo, msgr,
cols#88, it#8, lines#32,
acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
liswb|apple lisa console display (white on black),
is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
smso=\E[m, smul=\E[4m, use=lisa,
# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
# <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
#
# These entries assume that the 'Auto Wraparound' is enabled.
# Xon-Xoff flow control should also be enabled.
#
# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
# settings are in non-volatile memory and don't need to be reset upon login.
# Also setting the number of columns glitches the screen annoyingly.
# You can type "reset" to get them set.
#
lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
OTbs, OTpt, am, xenl, xon,
OTkn#4, cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g,
# Lisaterm in 132 column ("wide") mode.
lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
cols#132,
kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
# Although MacTerminal has insert/delete line, it is commented out here
# since it is much faster and cleaner to use the "lock scrolling region"
# method of inserting and deleting lines due to the MacTerminal implementation.
# Also, the "Insert/delete ch" strings have an extra character appended to them
# due to a bug in MacTerminal V1.1. Blink is disabled since it is not
# supported by MacTerminal.
mac|macintosh|Macintosh with MacTerminal,
xenl,
OTdN#30,
blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
# Lisaterm in 132 column ("wide") mode.
mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
cols#132, use=mac,
# The AppKit Terminal.app descriptions all have names beginning with
# "nsterm". Note that the statusline (-s) versions use the window
# titlebar as a phony status line, and may produce warnings during
# compilation as a result ("tsl uses 0 parameters, expected 1".) Ignore
# these warnings, or even ignore these entries entirely. Apps which
# need to position the cursor or do other fancy stuff inside the status
# line won't work with these entries. They're primarily useful for
# programs like Pine which provide simple notifications in the status
# line. Please note that non-ASCII characters don't work right in the
# status line, since Terminal.app incorrectly interprets their Unicode
# codepoints as MacRoman codepoints.
#
# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
# "nsterm" to comply with the name length and case conventions and
# limitations of various software packages [notably Solaris terminfo
# and UNIX.] A single Apple_Terminal alias is retained for
# backwards-compatbility.
#
# * Added function key support (F1-F4). These only work in Terminal.app
# version 51, hopefully the capabilities won't cause problems for people
# using version 41.
#
# * Added "full color" (-c) entries which support the 16-color mode in
# version 51.
#
# * By default, version 51 uses UTF-8 encoding with broken altcharset
# support, so "ASCII" (-7) entries without altcharset support were
# added.
# nsterm - AppKit Terminal.app
#
# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
# Terminal.app. It is a partial VT100 emulation with some xterm-like
# extensions. This terminfo was written to describe versions 41
# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
# version 10.1) of Terminal.app.
#
# Terminal.app runs under the Mac OS X Quartz windowing system (and
# other AppKit-supported windowing systems.) On the Mac OS X machine I
# use, the executable for Terminal.app is:
# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
#
# If you're looking for a description of the full-screen system
# console which runs under Apple's Darwin operating system on PowerPC
# platforms, see the "xnuppc" entry instead.
#
# There were no function keys in version 41. In version 51, there are
# four working function keys (F1, F2, F3 and F4.) The function keys
# are included in all of these entries.
#
# It does not support mouse pointer position reporting. Under some
# circumstances the cursor can be positioned using option-click; this
# works by comparing the cursor position and the selected position,
# and simulating enough cursor-key presses to move the cursor to the
# selected position. This technique fails in all but the simplest
# applications.
#
# It provides partial ANSI color support (background colors interacted
# badly with bold in version 41, though, as reflected in :ncv:.) The
# monochrome (-m) entries are useful if you've disabled color support
# or use a monochrome monitor. The full color (-c) entries are useful
# in version 51, which doesn't exhibit the background color bug. They
# also enable an xterm-compatible 16-color mode.
#
# The configurable titlebar is set using xterm-compatible sequences;
# it is used as a status bar in the statusline (-s) entries. Its width
# depends on font sizes and window sizes, but 50 characters seems to
# be the default for an 80x24 window.
#
# The MacRoman character encoding is used for some of the alternate
# characters in the "MacRoman" entries; the "ASCII" (-7) entries
# disable alternate character set support entirely, and the "VT100"
# (-acs) entries rely instead on Terminal.app's own buggy VT100
# graphics emulation, which seems to think the character encoding is
# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
# are useful in Terminal.app version 51, which supports UTF-8 and
# other ASCII-compatible character encodings but does not correctly
# implement VT100 graphics; once VT100 graphics are correctly
# implemented in Terminal.app, the "VT100" (-acs) entries should be
# usable in any ASCII-compatible character encoding [except perhaps
# in UTF-8, where some experts argue for disallowing alternate
# characters entirely.]
#
# Terminal.app reports "vt100" as the terminal type, but exports
# several environment variables which may aid detection in a shell
# profile (i.e. .profile or .login):
#
# TERM=vt100
# TERM_PROGRAM=Apple_Terminal
# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
#
# For example, the following Bourne shell script would detect the
# correct terminal type:
#
# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
# then
# export TERM
# if [ :"$TERM_PROGRAM_VERSION" = :41 ]
# then
# TERM="nsterm"
# else
# TERM="nsterm-c-7"
# fi
# fi
#
# In a C shell derivative, this would be accomplished by:
#
# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
# setenv TERM "nsterm"
# else
# setenv TERM "nsterm-c-7"
# endif
# endif
# endif
# The '+' entries are building blocks
nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
am, bw, msgr, xenl, xon,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
enacs=\E(B\E)0, rmacs=^O,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
smacs=^N, use=nsterm+7,
nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
acsc=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366\,\334.\377,
enacs=\E(B\E)0, rmacs=^O,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
smacs=^N, use=nsterm+7,
nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
hs,
wsl#50,
dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
op=\E[0m, use=ibm+16color,
nsterm+c41|AppKit Terminal.app v41 color support,
colors#8, ncv#37, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
# These are different combinations of the building blocks
# ASCII charset (-7)
nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
use=nsterm+7,
nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
use=nsterm+s, use=nsterm+7,
nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
use=nsterm+c41, use=nsterm+7,
nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
use=nsterm+c, use=nsterm+7,
nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
use=nsterm+s, use=nsterm+c41, use=nsterm+7,
nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
use=nsterm+s, use=nsterm+c, use=nsterm+7,
# VT100 alternate-charset (-acs)
nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
use=nsterm+acs,
nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
use=nsterm+s, use=nsterm+acs,
nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
use=nsterm+c41, use=nsterm+acs,
nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
use=nsterm+c, use=nsterm+acs,
nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
use=nsterm+s, use=nsterm+c, use=nsterm+acs,
# MacRoman charset
nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
use=nsterm+mac,
nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
use=nsterm+s, use=nsterm+mac,
nsterm|Apple_Terminal|AppKit Terminal.app v41+ w/MacRoman charset (color),
use=nsterm+c41, use=nsterm+mac,
nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
use=nsterm+c, use=nsterm+mac,
nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
use=nsterm+s, use=nsterm+c, use=nsterm+mac,
# This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
# and D P Schreber comparing to nsterm-c-s-acs.
#
# D P Schreber notes that $TERM can be set in Terminal.app, e.g.,
# defaults write com.apple.Terminal TermCapString nsterm-c-s-acs
# and that it is not set in Terminal's preferences dialog.
nsterm-16color|AppKit Terminal.app v100.1.8 with MacOS X 10.3.9,
kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
knp=\E[6~, kpp=\E[5~, use=nsterm-c-s-acs,
# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
#
# On PowerPC platforms, Apple's Darwin operating system uses a
# full-screen system console derived from a NetBSD framebuffer
# console. It is an ANSI-style terminal, and is not really VT-100
# compatible.
#
# Under Mac OS X, this is the system console driver used while in
# single-user mode [reachable by holding down Command-S during the
# boot process] and when logged in using console mode [reachable by
# typing ">console" at the graphical login prompt.]
#
# If you're looking for a description of the Terminal.app terminal
# emulator which runs under the Mac OS X Quartz windowing system (and
# other AppKit-supported windowing systems,) see the "nsterm"
# entry instead.
#
# NOTE: Under Mac OS X version 10.1, the default login window does not
# prompt for user name, instead requiring an icon to be selected from
# a list of known users. Since the special ">console" login is not in
# this list, you must make one of two changes in the Login Window
# panel of the Login section of System Prefs to make the special
# ">console" login accessible. The first option is to enable 'Show
# "Other User" in list for network users', which will add a special
# "Other..." icon to the graphical login panel. Selecting "Other..."
# will present the regular graphical login prompt. The second option
# is to change the 'Display Login Window as:' setting to 'Name and
# password entry fields', which replaces the login panel with a
# graphical login prompt.
#
# There are no function keys, at least not in Darwin 1.3.
#
# It has no mouse support.
#
# It has full ANSI color support, and color combines correctly with
# all three supported attributes: bold, inverse-video and underline.
# However, bold colored text is almost unreadable (bolding is
# accomplished using shifting and or-ing, and looks smeared) so bold
# has been excluded from the list of color-compatible attributes
# [using (ncv)]. The monochrome entry (-m) is useful if you use a
# monochrome monitor.
#
# There is one serious bug with this terminal emulation's color
# support: repositioning the cursor onto a cell with non-matching
# colors obliterates that cell's contents, replacing it with a blank
# and displaying a colored cursor in the "current" colors. There is
# no complete workaround at present [other than using the monochrome
# (-m) entries,] but removing the (msgr) capability seemed to help.
#
# The "standout" chosen was simple reverse-video, although a colorful
# standout might be more aesthetically pleasing. Similarly, the bold
# chosen is the terminal's own smeared bold, although a simple
# color-change might be more readable. The color-bold (-b) entries
# uses magenta colored text for bolding instead. The fancy color (-f
# and -f2) entries use color for bold, standout and underlined text
# (underlined text is still underlined, though.)
#
# Apparently the terminal emulator does support a VT-100-style
# alternate character set, but all the alternate character set
# positions have been left blank in the font. For this reason, no
# alternate character set capabilities have been included in this
# description. The console driver appears to be ASCII-only, so (enacs)
# has been excluded [although the VT-100 sequence does work.]
#
# The default Mac OS X and Darwin installation reports "vt100" as the
# terminal type, and exports no helpful environment variables. To fix
# this, change the "console" entry in /etc/ttys from "vt100" to
# "xnuppc-WxH", where W and H are the character dimensions of your
# console (see below.)
#
# The font used by the terminal emulator is apparently one originally
# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
# file includes descriptions for the following geometries:
#
# Pixels Characters Entry Name (append -m for monochrome)
# -------------------------------------------------------------------
# 640x400 80x25 xnuppc-80x25
# 640x480 80x30 xnuppc-80x30
# 720x480 90x30 xnuppc-90x30
# 800x600 100x37 xnuppc-100x37
# 896x600 112x37 xnuppc-112x37
# 1024x640 128x40 xnuppc-128x40
# 1024x768 128x48 xnuppc-128x48
# 1152x768 144x48 xnuppc-144x48
# 1280x1024 160x64 xnuppc-160x64
# 1600x1024 200x64 xnuppc-200x64
# 1600x1200 200x75 xnuppc-200x75
# 2048x1536 256x96 xnuppc-256x96
#
# The basic "xnuppc" entry includes no size information, and the
# emulator includes no reporting capability, so you'll be at the mercy
# of the TTY device (which reports incorrectly on my hardware.) The
# color-bold entries do not include size information.
# The '+' entries are building blocks
xnuppc+basic|Darwin PowerPC Console basic capabilities,
am, bce, mir, xenl,
it#8,
bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
xnuppc+c|Darwin PowerPC Console ANSI color support,
colors#8, ncv#32, pairs#64,
op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
xnuppc+b|Darwin PowerPC Console color-bold support,
ncv#32,
bold=\E[35m,
sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
use=xnuppc+basic,
xnuppc+f|Darwin PowerPC Console fancy color support,
ncv#35,
sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
ncv#35,
bold=\E[33m,
sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
# Building blocks for specific screen sizes
xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
cols#80, lines#25,
xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
cols#80, lines#30,
xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
cols#90, lines#30,
xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
cols#100, lines#37,
xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
cols#112, lines#37,
xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
cols#128, lines#40,
xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
cols#128, lines#48,
xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
cols#144, lines#48,
xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
cols#160, lines#64,
xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
cols#200, lines#64,
xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
cols#200, lines#75,
xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
cols#256, lines#96,
# These are different combinations of the building blocks
xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
use=xnuppc+basic,
xnuppc|darwin|Darwin PowerPC Console (color),
use=xnuppc+c, use=xnuppc+basic,
xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
use=xnuppc+b,
xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
use=xnuppc+b, use=xnuppc+c,
xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
use=xnuppc+f,
xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
use=xnuppc+f, use=xnuppc+c,
xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
use=xnuppc+f2,
xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
use=xnuppc+f2, use=xnuppc+c,
# Combinations for specific screen sizes
xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
use=xnuppc+80x25, use=xnuppc+basic,
xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
use=xnuppc+80x30, use=xnuppc+basic,
xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
use=xnuppc+90x30, use=xnuppc+basic,
xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
use=xnuppc+100x37, use=xnuppc+basic,
xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
use=xnuppc+112x37, use=xnuppc+basic,
xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
use=xnuppc+128x40, use=xnuppc+basic,
xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
use=xnuppc+128x48, use=xnuppc+basic,
xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
use=xnuppc+144x48, use=xnuppc+basic,
xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
use=xnuppc+160x64, use=xnuppc+basic,
xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
use=xnuppc+200x64, use=xnuppc+basic,
xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
use=xnuppc+200x75, use=xnuppc+basic,
xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
use=xnuppc+256x96, use=xnuppc+basic,
xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
#### Radio Shack/Tandy
#
# (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
# I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
# From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
OTbs, am,
cols#80, it#8, lines#24,
bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
# (trs2: removed obsolete ":nl=^_:" -- esr)
trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
OTbs, am, msgr,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
# From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
# (This had extension capabilities
# :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
# :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
# I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
trs16|trs-80 model 16 console,
OTbs, am,
cols#80, it#8, lines#24,
acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
smacs=\ERG, smso=\ERD,
#### Atari ST
#
# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
atari|atari st,
OTbs, am,
cols#80, it#8, lines#25,
clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
lines#49,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
use=vt220,
# MiNT VT52 emulation. 80 columns, 25 rows.
# MiNT is Now TOS, the operating system which comes with all Ataris now
# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
st52|Atari ST with VT52 emulation,
am, km,
cols#80, lines#25,
bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
smcup=\Ee, smso=\Ep,
#### Commodore Business Machines
#
# Formerly located in West Chester, PA; went spectacularly bust in 1994
# after years of shaky engineering and egregious mismanagement. Made one
# really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
# C-128, VIC-20). The C-64 is said to have been the most popular machine
# ever (most units sold); they can still be found gathering dust in closets
# everywhere.
#
# From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
# Added a few more entries, converted caret-type control sequence (^x) entries
# to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
# Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
#
# :as:, :ae: Support for alternate character sets.
# :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
# :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
# This one appears to fix a problem I always had with a line ending
# at 'width+1' (I think) followed by a blank line in vi. The blank
# line tended to disappear and reappear depending on how the screen
# was refreshed. Note that this is probably needed only if you use
# something like a Dnet Fterm with the window sized to some peculiar
# dimension larger than 80 columns.
# :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
# (amiga: removed obsolete :kn#10:,
# also added empty <acsc> to suppress a warning --esr)
amiga|Amiga ANSI,
OTbs, am, bw, xenl,
cols#80, lines#24,
acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
# (amiga: added empty <acsc> to suppress a warning.
# I'm told this entry screws up badly with AS225, the Amiga
# TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
amiga-h|Hans Verkuil's Amiga ANSI,
OTbs, bw, msgr,
cols#80, lines#24,
acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
smso=\2337m, smul=\2334m,
# From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
#
# Pavel Fedin added
# Home Shift+Left
# End Shift+Right
# PgUp Shift+Up
# PgDn Shift+Down
amiga-8bit|Amiga ANSI using 8-bit controls,
acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
kpp=\233T, ri=\215, rin@, use=amiga-h,
# From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
# requires use of appropriate preferences settings.
amiga-vnc|Amiga using VNC console (black on light gray),
am, da, db, msgr, ndscr,
btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
indn=\E[%p1%dS, invis=\E8m,
is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
smso=\E[1m, smul=\E[4m,
# MorphOS on Genesi Pegasos
# By Pavel Fedin <sonic_amiga@rambler.ru>
morphos,
acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
ri=\215, rin@, use=amiga-h,
# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
# I'm trying to write a termcap for a commodore b-128, and I'm
# having a little trouble. I've had to map most of my control characters
# to something that unix will accept (my delete-char is a ctrl-t, etc),
# and create some functions (like cm), but thats life.
# The problem is with the arrow keys - right, and up work fine, but
# left deletes the previous character and down I just can't figure out.
# Jove knows what I want, but I don't know what it's sending to me (it
# isn't thats bound to next-line in jove).
# Anybody got any ideas? Here's my termcap.
# DAG -- I changed his "^n" entries to "\n"; see if that works.
#
commodore|b-128|Commodore B-128 micro,
am, bw,
OTdN#20, cols#80, lines#24, pb#150,
OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
smir=,
#### North Star
#
# North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
northstar|North Star Advantage,
OTbs,
cols#80, lines#24,
clear=\004$<200/>,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
el=\016$<200/>, home=\034\032$<200/>,
#### Osborne
#
# Thu Jul 7 03:55:16 1983
#
# As an aside, be careful; it may sound like an anomaly on the
# Osborne, but with the 80-column upgrade, it's too easy to
# enter lines >80 columns!
#
# I've already had several comments...
# The Osborne-1 with the 80-col option is capable of being
# 52, 80, or 104 characters wide; default to 80 for compatibility
# with most systems.
#
# The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
osborne-w|osborne1-w|osborne I in 104-column mode,
msgr, ul, xt,
cols#104, lines#24,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
# Osborne I from ptsfa!rhc (Robert Cohen) via BRL
osborne|osborne1|osborne I in 80-column mode,
OTbs, am, mir, msgr, ul, xhp,
OTdB#4, cols#80, lines#24,
clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
#
# Osborne Executive definition from BRL
# Similar to tvi920
# Added by David Milligan and Tom Smith (SMU)
osexec|Osborne executive,
OTbs, am,
OTug#1, cols#80, lines#24, xmc#1,
OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
smul=\El, tbc=\E3,
#### Console types for obsolete UNIX clones
#
# Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
# machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
# were commercial, Minix an educational tool sold in conjunction with a book.
# Memory-segmentation limits and a strong tendency to look like V7 long after
# it was obsolete made all three pretty lame. Venix croaked early. Coherent
# and Minix were ported to 32-bit Intel boxes, only to be run over by a
# steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
# Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
# are also, I'm told, Minix ports that ran on Amiga and Atari machines and
# even as single processes under SunOS and the Macintosh OS.
#
# This is the entry provided with minix 1.7.4, with bogus :ri: removed.
minix|minix console (v1.7),
am, xenl,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S,
kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM,
rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
minix-old|minix console (v1.5),
xon,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
# The linewrap option can be specified by editing /usr/include/minix/config.h
# before recompiling the minix 1.5 kernel.
minix-old-am|minix console with linewrap,
am, use=minix-old,
pc-minix|minix console on an Intel box,
use=klone+acs, use=minix,
# According to the Coherent 2.3 manual, the PC console is similar
# to a z19. The differences seem to be (1) 25 lines, (2) no status
# line, (3) standout is broken, (4) ins/del line is broken, (5)
# has blinking and bold.
pc-coherent|pcz19|coherent|IBM PC console running Coherent,
am, mir,
cols#80, it#8, lines#25,
bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
# According to the Venix 1.1 manual, the PC console is similar
# to a DEC vt52. Differences seem to be (1) arrow keys send
# different strings, (2) enhanced standout, (3) added insert/delete line.
# Note in particular that it doesn't have automatic margins.
# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
# not described here because this derives from an old termcap entry.
pc-venix|venix|IBM PC console running Venix,
cols#80, it#8, lines#25,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
#### Miscellaneous microcomputer consoles
#
# If you know anything more about any of these, please tell me.
#
# The MAI Basic Four computer was obsolete at the end of the 1980s.
# It may be used as a terminal by putting it in "line" mode as seen on
# one of the status lines.
# Initialization is similar to CIT80. <is2> will set ANSI mode for you.
# Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
# wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
# used \ED instead.
# From: bf347@lafn.org (David Lawyer), 28 Jun 1997
mai|basic4|MAI Basic Four in ansi mode,
am, da, db, mir, msgr,
cols#82, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
smir=\E[4h, smso=\E[7m, smul=\E[4m,
# basis from Peter Harrison, Computer Graphics Lab, San Francisco
# ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
#
# On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
# The Basis 108 was a Apple II clone, manufactured by the "Basis
# Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
# about 1,5 km from where I live, but doesn't build own computers any
# more). A Basis 108 featured a really heavy (cast aluminium?) case, was
# equipped with one or two 5.25" disk drives, had a monochrome and colour
# video output for a TV set or a dedicated monitor and several slots for
# Apple II cards. Basis 108 were quite popular at german schools before
# the advent of the IBM PC. They run, for example, the UCSD Pascal
# development system (which I used even in 1993 to program the steering
# and data recording for our school's experimental solar panel :), Apple DOS
# or CP/M.
# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
basis|BASIS108 computer with terminal translation table active,
clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
smso=\E(, use=adm3a,
# luna's BMC terminal emulator
luna|luna68k|LUNA68K Bitmap console,
cols#88, lines#46, use=ansi-mini,
megatek|pegasus workstation terminal emulator,
am, os,
cols#83, lines#60,
# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
# interface (pre-Macintosh by several years) that went nowhere.
xerox820|x820|Xerox 820,
am,
cols#80, lines#24,
bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
home=^^, ind=^J,
#### Videotex and teletext
#
# \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
# \E[?3l 80 columns
# \E[?4l scrolling on
# \E[12h local echo off
# \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
# \E)0 G1 DEC set (line graphics)
#
# From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
OTbs, eslok, hs, xenl,
cols#80, it#8, lines#24, wsl#72, xmc#0,
acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
u6=\E[%i%d;%dR, u7=\E[6n,
# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
#
minitel1|minitel 1,
am, bw, eslok, hs, hz, msgr,
colors#8, cols#40, lines#24, pairs#8,
acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
enacs=^Y, fsl=^J, home=^^, ind=^J,
is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
# is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
minitel1b|minitel 1-bistandard (in 40cols mode),
mir,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
# <rmkx> posait des problemes (logout en sortant de vi).
minitel1b-80|minitel 1-bistandard (standard teleinformatique),
am@, bw@, hz@,
colors@, cols#80, it#8, pairs@,
blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
######## OBSOLETE VDT TYPES
#
# These terminals are *long* dead -- these entries are retained for
# historical interest only.
#### Amtek Business Machines
#
# (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
# but these caps were commented out in 8.3; also, removed overridden
# ":do=^J:" -- esr)
abm80|amtek business machines 80,
OTbs, am, bw,
cols#80, lines#24,
cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
#### Bell Labs blit terminals
#
# These were AT&T's official entries. The 5620 FAQ maintained by
# David Breneman <daveb@dgtl.com> has this to say:
#
# Actually, in the beginning was the Jerq, and the Jerq was white with a
# green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
# was good. But lo, upon the horizon loomed a mighty management-type person
# (known now only by the initials VP) who said, the mighty Jerq must stay
# alone, and could not go forth into the world. So Locanthi and Pike put the
# Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
# world. And the Jerq lived the rest of its days in research, but never
# strayed from those paths.
#
# In all seriousness, the Blit was originally known as the Jerq, but when
# it started to be shown outside of the halls of the Bell Labs Research
# organization, the management powers that be decided that the name could
# not remain. So it was renamed to be Blit. This was in late 1981.
#
# (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
# 730, and 730+.)
#
blit|jerq|blit running teletype rom,
am, eo, ul, xon,
cols#87, it#8, lines#72,
bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
# (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
cbblit|fixterm|blit running columbus code,
cols#88,
ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
smul=\EU", use=blit,
oblit|ojerq|first version of blit rom,
am, da, db, eo, mir, ul, xon,
cols#88, it#8, lines#72,
bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
smir=\EQ,
#### Bolt, Beranek & Newman (bbn)
#
# The BitGraph was a product of the now-defunct BBN Computer Corporation.
# The parent company, best known as the architects of the Internet, is
# still around.
#
# Jeff DelPapa <dp@world.std.com> writes:
# The bitgraph was a large white box that contained a monochrome bitmap
# display, and a 68000 to run it. You could download code and run it on
# the cpu, it had 128kb (I think) of memory. I used one in the late
# 70's, sure beat a vt100. It had one strange feature tho -- it used
# the cpu to bitblt pixels to scroll, it took longer than the refresh
# rate, and looked like a rubber sheet stretching, then snapping
# upwards. It had everything the early mac had, except a floppy drive a
# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
# Beranek and Neuman) sold at most a few hundred of them to the real
# world. DOD may have bought more...
#
# Entries for the BitGraph terminals. The problem
# with scrolling in vi can only be fixed by getting BBN to put
# smarter scroll logic in the terminal or changing vi or padding
# scrolls with about 500 ms delay.
#
# I always thought the problem was related to the terminal
# counting newlines in its input buffer before scrolling and
# then moving the screen that much. Then vi comes along and
# paints lines in on the bottom line of the screen, so you get
# this big white gap.
bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
use=bg2.0,
bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
use=bg2.0,
bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
OTbs, xenl,
cols#85, lines#64,
bel=^G, clear=\E[H\E[J$<150>, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
sgr0=\E[m, smkx=\E=, smso=\E[7m,
bg1.25rv|bbn bitgraph 1.25 (reverse video),
flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
use=bg1.25,
bg1.25nv|bbn bitgraph 1.25 (normal video),
flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
use=bg1.25,
# (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
bg1.25|bbn bitgraph 1.25,
cols#85, lines#64,
bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
smso=\E[7m,
#### Bull (bq, dku, vip)
#
# (Adapted for terminfo; AIX extension capabilities translated -- esr)
#============================================#
# BULL QUESTAR 210 `SDP' terminals emulation #
#============================================#
#
# Description written by R.K.Saunders (Bull Transac)
#
# Modifications written by F. Girard (Bull MTS)
# 19-05-87 V02.00.01
# 17-12-87 V02.00.02
# 15-09-89 V02.00.05
#
# Typical technical selections F1 (modes SDP/ROLL):
# -------------------------------------------------------
# | 01 02 03 04 05 06 07 08 09 10 |
# | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
# | |
# | 11 12 13 14 15 16 17 18 19 20 |
# | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
# | |
# | 21 22 23 24 25 26 27 28 29 30 |
# | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
# | |
# | 31 32 33 34 35 36 37 38 39 40 |
# | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
# -------------------------------------------------------
# Typical firmware identification F5 "etat 6":
# P287.02.04b (AZERTY)
# P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
# P298.03.03 (monochrome) or P374.03.02 (colour)
#
# SM SDP mode (VIP command): ^[[?=h
# RIS (erases screen): ^[c
# DMI disable keyboard: ^[`
# SM double rendition mode: ^[[?>h
# RM solicited status mode: ^[[5l
# RM character mode: ^[[>l
# RM echoplex mode: ^[[12l
# RM column tab mode: ^[[18l
# RM forbid SS2 keyboard mode: ^[[?<l
# SM scroll mode: ^[[=h
# FCF enable XON/XOFF: ^[P1s^[\
# MTL select end msg character: ^[[^Wp
# EMI enable keyboard: ^[b
# RIS retour etat initial: ^[c
# enable FC keypad: ^[[?<h,
# MPW map status line window: ^[PY99:98^[\
# SCP select status line: ^[[0;98v
# ED erase entire partition: ^[[2J
# SCP select main partition: ^[[v
# SM character insertion mode: ^[[4h
# RM character replacement mode: ^[[4l
# COO cursor on: ^[[r
# COO cursor off: ^[[1r
# SGR dim (turquoise) rev attr: ^[[2;7m
# SGR Data normal attr: ^[[m
# SO Line-graphic mode ON: ^N
# SI Line-graphic mode OFF: ^O
# MC start routing to printer: ^[[5i
# MC stop routing to printer: ^M^[[4i
#
# This entry covers the following terminals:
# dku7102, tws2102, and tws models 2105 to 2112
tws-generic|dku7102|Bull Questar tws terminals,
am, eslok, hs, mir, msgr, xenl, xhp@, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
il1=\E[L, ind=^J, invis=\E[0;8m,
is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g,
tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
use=tws-generic,
tws2103|xdku|BULL Questar tws2103,
ht=^I, use=tws-generic,
tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
ht=^I, use=tws2102-sna,
dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
clear=\E[2J\E[H, cup@, dl@, dl1@,
dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
use=tws-generic,
dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
#=========================================================#
# BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
#=========================================================#
#
# Description written by J. Staerck (BULL SA)
# Copyright (c) 1989 BULL SA
#---------------------------------------------------------------------------
# This entry is used for terminals with vt320 emulation mode
# and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
# 7 bit Control Characters,
# 80 columns screen.
# Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
# They are used in string capabilities with vt220-320 emulation mode.
# In the following DEC definitions, two kinds of terminfo databases are
# provided :
# 1. the first with Command Sequence Introducer starting with escape
# sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
# 2. the second with Command Sequence Introducer starting with escape
# sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
# Soft Terminal Reset esc [ ! p
# RIS (erases screen): esc c
# DECKPNM numeric keypad mode: esc >
# DECKPAM applic. keypad mode: esc =
# DECSTBM Scrolling region: esc [ r
# SCS select G0 = US: esc ( B
# SCS select G1 = line-graphic: esc ) 0
# Select 7-bit C1 controls: esc sp F
# Select 8-bit C1 controls: esc sp G
# Select cursor home: esc [ H
# Select erase screen: esc [ J
# SM KAM lock keyboard: esc [ 2 h
# RM KAM unlock keyboard: esc [ 2 l
# SM SRM local echo off: esc [ 1 2 h
# RM SRM local echo on: esc [ 1 2 l
# SM LNM New line : esc [ 2 0 h
# RM LNM return = CR only: esc [ 2 0 l
# SM DECCKM cursor keys mode: esc [ ? 1 h
# RM DECCKM appli. keys mode: esc [ ? 1 l
# SM DECANM ANSI mode on: esc [ ? 2 h
# RM DECANM ANSI mode off: esc [ ? 2 l
# SM DECCOLM 132-column screen: esc [ ? 3 h
# RM DECCOLM 80-column screen: esc [ ? 3 l
# SM DECSCLM Smooth scroll: esc [ ? 4 h
# RM DECSCLM Jump scroll: esc [ ? 4 l
# SM DECSCNM screen light backgr. esc [ ? 5 h
# RM DECSCNM screen dark backgr. esc [ ? 5 l
# SM DECOM move within margins: esc [ ? 6 h
# RM DECOM move outside margins: esc [ ? 6 l
# SM DECAWM auto right margin: esc [ ? 7 h
# RM DECAWM auto right margin: esc [ ? 7 l
# SM DECARM auto repeat: esc [ ? 8 h
# RM DECARM auto repeat: esc [ ? 8 l
# DECSASD Select active main: esc [ 0 $ }
# DECSASD Select active status: esc [ 1 $ }
# DECSSDT Select status none: esc [ 0 $ ~
# DECSSDT Select status indic.: esc [ 1 $ ~
# DECSSDT Select status host-wr: esc [ 2 $ ~
# SM DECTCEM Visible cursor: esc [ ? 2 5 h
# RM DECTCEM Invisible cursor: esc [ ? 2 5 l
# SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
# RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
# SM DECNKM numeric keypad mode: esc [ ? 6 6 h
# RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
# SM DECKBUM clavier informatique esc [ ? 6 8 h
# RM DECKBUM clavier bureautique: esc [ ? 6 8 l
# DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
# DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
# Char. and Line attributes: esc [ Ps ... Ps m
# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
#
# This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
bq300|Bull vt320 ISO Latin 1 80 columns terminal,
am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is1=\E[63;1"p\E[2h,
is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
bq300-rv|Bull vt320 reverse 80 columns,
flash=\E[?5l$<50>\E[?5h,
is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
use=bq300,
bq300-w|Bull vt320 132 columns,
cols#132, wsl#132,
is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
rs2=\E[?3h, use=bq300,
bq300-w-rv|Bull vt320 reverse mode 132 columns,
cols#132, wsl#132,
flash=\E[?5l$<50>\E[?5h,
is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
rs2=\E[?3h, use=bq300,
# This entry is used for terminals with vt320 emulation mode
# and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
# 8 bit Control Characters, (CSI coded as x9B for ESC [)
# 80 columns screen.
# Soft Terminal Reset csi ! p
# RIS (erases screen): esc c
# DECKPNM numeric keypad mode: esc >
# DECKPAM applic. keypad mode: esc =
# DECSTBM Scrolling region: esc [ r
# SCS select G0 = US: esc ( B
# SCS select G1 = line-graphic: esc ) 0
# Select 7-bit C1 controls: esc sp F
# Select 8-bit C1 controls: esc sp G
# Select cursor home: csi H
# Select erase screen: csi J
# SM KAM lock keyboard: csi 2 h
# RM KAM unlock keyboard: csi 2 l
# SM SRM local echo off: csi 1 2 h
# RM SRM local echo on: csi 1 2 l
# SM LNM New line : csi 2 0 h
# RM LNM return = CR only: csi 2 0 l
# SM DECCKM cursor keys mode: csi ? 1 h
# RM DECCKM appli. keys mode: csi ? 1 l
# SM DECANM ANSI mode on: csi ? 2 h
# RM DECANM ANSI mode off: csi ? 2 l
# SM DECCOLM 132-column screen: csi ? 3 h
# RM DECCOLM 80-column screen: csi ? 3 l
# SM DECSCLM Smooth scroll: csi ? 4 h
# RM DECSCLM Jump scroll: csi ? 4 l
# SM DECSCNM screen light backgr. csi ? 5 h
# RM DECSCNM screen dark backgr. csi ? 5 l
# SM DECOM move within margins: csi ? 6 h
# RM DECOM move outside margins: csi ? 6 l
# SM DECAWM auto right margin: csi ? 7 h
# RM DECAWM auto right margin: csi ? 7 l
# SM DECARM auto repeat: csi ? 8 h
# RM DECARM auto repeat: csi ? 8 l
# DECSASD Select active main: csi 0 $ }
# DECSASD Select active status: csi 1 $ }
# DECSSDT Select status none: csi 0 $ ~
# DECSSDT Select status indic.: csi 1 $ ~
# DECSSDT Select status host-wr: csi 2 $ ~
# SM DECTCEM Visible cursor: csi ? 2 5 h
# RM DECTCEM Invisible cursor: csi ? 2 5 l
# SM DECNCRM 7 bits NCR set: csi ? 4 2 h
# RM DECNCRM Multi or ISO latin: csi ? 4 2 l
# DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
# or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
# DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
# Char. and Line attributes: csi Ps ... Ps m
# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
# (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
bq300-8|Bull vt320 full 8 bits 80 columns,
am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
clear=\233H\233J, cnorm=\233?25h, cr=^M,
csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB,
cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA,
dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM,
dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
el=\233K, el1=\2331K, enacs=\E(B\E)0,
flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED,
is1=\E[63;2"p\E[2h,
is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
flash=\233?5l$<50>\233?5h,
is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
use=bq300-8,
bq300-8w|Bull vt320 8-bit 132 columns,
cols#132, wsl#132,
is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
rs2=\233?3h, use=bq300-8,
bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
cols#132, wsl#132,
flash=\233?5l$<50>\233?5h,
is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
rs2=\233?3h, use=bq300-8,
# This entry is used for terminals with vt320 emulation mode
# a 102 keys keyboard (PC scancode !) and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
# 7 bit Control Characters,
# 80 columns screen.
bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
flash=\E[?5l$<50>\E[?5h,
is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
use=bq300-pc,
bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
cols#132, wsl#132,
is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
rs2=\E[?3h, use=bq300-pc,
bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
cols#132, wsl#132,
flash=\E[?5l$<50>\E[?5h,
is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
rs2=\E[?3h, use=bq300-pc,
# 8 bit ISO Latin Character Set (ISO 8859-1),
# 8 bit Control Characters,
# 80 columns screen.
bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
flash=\E[?5l$<50>\E[?5h,
is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
use=bq300-8-pc,
bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
cols#132, wsl#132,
is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
rs2=\E[?3h, use=bq300-8-pc,
bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
cols#132, wsl#132,
flash=\E[?5l$<50>\E[?5h,
is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
rs2=\E[?3h, use=bq300-8-pc,
#======================================================#
# BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
#======================================================#
# normal mode, 8 bits, 80 columns terminal.
# RES reset : ^[e
# RIS reset initial state: ^[c
# BLE bell enable ^[h
# BLD bell disable ^[g
# CAMS char. attr. mode set ^[[D
# CAMR char. attr. mode reset ^[[G
# CLR clear ^[`
# KBU keyboard unlock (set) ^[[W
# KBL keyboard lock (reset) ^[[X
# CM character mode (async.) ^[k
# NEP non echoplex mode (by host) ^[l
# EP echoplex mode (by host) ^[m
# IM insert mode set ^[[I
# IM insert mode reset ^[[J
# RMS roll mode set ^[r
# RMR roll mode reset ^[q
# SM78 set mode vip7800 ^[[1q
# SD scroll up (72 lines) ^[[0s
# SD scroll down (72 lines) ^[[1s
# RBM block mode reset ^[[E
# SLS status line set ^[w
# SLR status line reset ^[v
# SLL status line lock ^[O
# LGS Line-graphic mode set ^[G
# LGR Line-graphic mode reset ^[F
# TBC tab clear (at cursor pos.) ^[[g
# TBI tab initialize ^[[N
# TBS tab set (at cursor pos.) ^[p
# PDS print data space ^[[0p
# PHD print host data ^[[3p
# PDT print data terminator ^[[<p
# PRES print adapter reset ^[[2p
# SSPR multi-part. reset ^[[<>u
# SSP0 partition 0 set ^[[00u
# SSP1 partition n format 1 ^[[PnPnSTRINGu
# SSP2 partition n format 2 ^[[PnPnSTRINGu
# SSP3 partition n format 3 ^[[PnPnu
# ATR attribute (visual)
# blink : ^[sB
# dim : ^[sL
# hide (blank) : ^[sH
# restore : ^[sR
# inverse video : ^[sI
# prot. : ^[sP
# underline : ^[s_
# reset : ^{
#
# This covers the vip7800 and BQ3155-vip7800
vip|Bull Questar 3155-7800,
am, eslok, hs, km, mc5i, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3, wsl#80,
acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
is2=\E[00u\E[<>001001024080024080u\E[01u,
is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
smul=\Es_, tbc=\E[N, tsl=\Ew,
# normal screen, 8 bits, 132 columns terminal.
vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
cols#132, wsl#132,
is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
lines#72,
is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
cols#132, lines#72, wsl#132,
is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
#### Chromatics
#
# I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
# that is smaller than the screen, and puts up a warning message
# outside the window. Te erases the warning message, puts the
# window back to be the whole screen, and puts the cursor at just
# below the small window. I defined <cnorm> and <civis> to really turn
# the cursor on and off, but I have taken this out since I don't
# like the cursor being turned off when vi exits.
cg7900|chromatics|chromatics 7900,
am,
cols#80, lines#40,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
rmso=\001C1\,\001c2\,,
smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
#### Computer Automation
#
ca22851|computer automation 22851,
am,
cols#80, lines#24,
bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
#### Cybernex
#
# This entry has correct padding and the undocumented "ri" capability
cyb83|xl83|cybernex xl-83,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
cyb110|mdl110|cybernex mdl-110,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
ht=\011$<43>, ich1=\016A\035$<3.5>,
il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
#### Datapoint
#
# Datapoint is gone. They used to be headquartered in Texas.
# They created ARCnet, an Ethernet competitor that flourished for a while
# in the early 1980s before 3COM got wise and cut its prices. The service
# side of Datapoint still lives (1995) in the form of Intelogic Trace.
#
dp3360|datapoint|datapoint 3360,
OTbs, am,
cols#82, lines#25,
bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
ed=^_, el=^^, home=^], ind=^J,
# From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
# The Datapoint 8242 Workstation was sold at least between 1985
# and 1989. To make the terminal work with this entry, press
# CONTROL-INT-INT to take the terminal off-line, and type (opt).
# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
# CR/LF off. Use control-shift-[] as escape key, control-I as tab,
# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
# fact unusable because the strings sent by the terminal conflict
# with other keys).
# The terminal is capable of displaying "box draw" characters.
# For each graphic character you must send 2 ESC's (\E\E) followed
# by a control character as follows:
# character meaning
# ========= =======
# ctrl-E top tee
# ctrl-F right tee
# ctrl-G bottom tee
# ctrl-H left tee
# ctrl-I cross
# ctrl-J top left corner
# ctrl-K top right corner
# ctrl-L bottom left corner
# ctrl-M bottom right corner
# ctrl-N horizontal line
# ctrl-O vertical line
# Unfortunately this cannot be fitted into the termcap/terminfo
# description scheme.
dp8242|datapoint 8242,
msgr,
cols#80, lines#25,
bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
cr=^M, cub1=^H, cud1=^J,
cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
home=^U, ht=^I, il1=\E^T, ind=^C,
is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
smso=\E^E, smul=\E^F,
wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
#### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
#
# These entries are DEC's official terminfos for its older terminals.
# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
# Engineering for more information. Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
gt40|dec gt40,
OTbs, os,
cols#72, lines#30,
bel=^G, cr=^M, cub1=^H, cud1=^J,
gt42|dec gt42,
OTbs, os,
cols#72, lines#40,
bel=^G, cr=^M, cub1=^H, cud1=^J,
vt50|dec vt50,
OTbs,
cols#80, lines#12,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
vt50h|dec vt50h,
OTbs,
cols#80, lines#12,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, ht=^I, ind=^J, ri=\EI,
# (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
vt61|vt-61|vt61.5|dec vt61,
cols#80, lines#24,
bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
ri=\E$<20>I,
# The gigi does standout with red!
# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
gigi|vk100|dec gigi graphics terminal,
OTbs, am, xenl,
cols#84, lines#24,
bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
el=\E[K, ht=^I, ind=^J,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
smul=\E[4m,
# DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
# a PC differentiated from the IBM clones. It was a total, ludicrous,
# grossly-overpriced failure (among other things, DEC's OS didn't include
# a format program, so you had to buy pre-formatted floppies from DEC at
# a hefty premium!).
pro350|decpro|dec pro console,
OTbs,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
dw1|decwriter I,
OTbs, hc, os,
cols#72,
bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
dw2|decwriter|dw|decwriter II,
OTbs, hc, os,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
# \E(B Use U.S. character set (otherwise # => british pound !)
# \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
# \E[w 10 char/in pitch
# \E[1;132 full width horizontal margins
# \E[2g clear all tab stops
# \E[z 6 lines/in
# \E[66t 66 lines/page (for \f)
# \E[1;66r full vertical page can be printed
# \E[4g clear vertical tab stops
# \E> disable alternate keypad mode (so it transmits numbers!)
# \E[%i%p1%du set tab stop at column %d (origin == 1)
# (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
# a tab stop)
#
# The dw3 does standout with wide characters.
#
dw3|la120|decwriter III,
OTbs, hc, os,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
dw4|decwriter IV,
OTbs, am, hc, os,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
# These aren't official
ln03|dec ln03 laser printer,
hc,
cols#80, lines#66,
bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
smul=\E[4m,
ln03-w|dec ln03 laser printer 132 cols,
cols#132,
bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
kcud1=^J, nel=^M^J, use=ln03,
#### Delta Data (dd)
#
# Untested. The cup sequence is hairy enough that it probably needs work.
# The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
# There are BSD-derived termcap entries floating around for this puppy
# that are *certainly* wrong.
delta|dd5000|delta data 5000,
OTbs, am,
cols#80, lines#27,
bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
#### Digital Data Research (ddr)
#
# (ddr: I added <rmam>/<smam> based on the init string -- esr)
ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
OTbs, am, xenl,
cols#80, it#8, lines#24, vt#3,
blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m$<2/>,
#### Evans & Sutherland
#
# Jon Leech <leech@cs.unc.edu> tells us:
# The ps300 was the Evans & Sutherland Picture System 300, a high
# performance 3D vector graphics system with a bunch of specialized hardware.
# Approximate date of release was 1982 (early 80s, anyway), and it had several
# evolutions including (limited) color versions such as the PS330C. PS300s
# were effectively obsolete by the late 80s, replaced by raster graphics
# systems, although specialized applications like molecular modelling
# hung onto them for a while longer. AFAIK all E&S vector graphics systems
# are out of production, though of course E&S is very much alive (in 1996).
# (ps300: changed ":pt@:" to "it@" -- esr)
#
ps300|Picture System 300,
xt,
it@,
rmso@, rmul@, smso@, smul@, use=vt100,
#### General Electric (ge)
#
terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
OTbs, hc, os,
cols#120,
bel=^G, cr=^M, cud1=^J, ind=^J,
#### Heathkit/Zenith
#
# Here is a description of the H19 DIP switches:
#
# S401
# 0-3 = baud rate as follows:
#
# 3 2 1 0
# --- --- --- ---
# 0 0 1 1 300 baud
# 0 1 0 1 1200 baud
# 1 0 0 0 2400 baud
# 1 0 1 0 4800 baud
# 1 1 0 0 9600 baud
# 1 1 0 1 19.2K baud
#
# 4 = parity (0 = no parity)
# 5 = even parity (0 = odd parity)
# 6 = stick parity (0 = normal parity)
# 7 = full duplex (0 = half duplex)
#
# S402
# 0 = block cursor (0 = underscore cursor)
# 1 = no key click (0 = keyclick)
# 2 = wrap at end of line (0 = no wrap)
# 3 = auto LF on CR (0 = no LF on CR)
# 4 = auto CR on LF (0 = no CR on LF)
# 5 = ANSI mode (0 = VT52 mode)
# 6 = keypad shifted (0 = keypad unshifted)
# 7 = 50Hz refresh (1 = 60Hz refresh)
#
# Factory Default settings are as follows:
# 7 6 5 4 3 2 1 0
# S401 1 0 0 0 1 1 0 0
# S402 0 0 0 0 0 0 0 0
# (h19: I added <rmam>/<smam> based on the init string;
# also added empty <acsc> to suppress a tic warning -- esr)
h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
OTbs, am, mir, msgr,
cols#80, it#8, lines#24,
acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
h19-bs|heathkit w/keypad shifted,
rmkx=\Eu, smkx=\Et, use=h19-b,
h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
rmkx=\Eu, smkx=\Et, use=h19-u,
# (h19: merged in <ip> from BSDI hp19-e entry>;
# also added empty <acsc> to suppress a tic warning --esr)
# From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
# Tim tells us that:
# I have an old Zenith-19 terminal at home that still gets a lot of use.
# This terminal suffers from the same famous insert-mode padding lossage
# that has been acknowledged for the Z29 terminal. Emacs is nearly
# unusable on this box, since even a half-scroll up or down the window
# causes flaming terminal death.
#
# On the Z19, the only way I have found around this problem is to remove
# the :al: and :dl: entries entirely. No amount of extra padding will
# help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
# makes Emacs a little slower, but it remains in the land of the living.
# Big win.
h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
OTbs, am, eslok, hs, mir, msgr,
cols#80, it#8, lines#24,
acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{, bel=^G,
clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
h19-u|heathkit with underscore cursor,
cnorm@, cvvis@, use=h19-b,
h19-g|h19g|heathkit w/block cursor,
cnorm=\Ex4, cvvis@, use=h19-b,
alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
lines#60,
dl1=\EM, il1=\EL, use=h19,
# The major problem with the Z29 is that it requires more padding than the Z19.
#
# The problem with declaring an H19 to be synonymous with a Z29 is that
# it needs more padding. It especially loses if a program attempts
# to put the Z29 into insert mode and insert text at 9600 baud. It
# even loses worse if the program attempts to insert tabs at 9600
# baud. Adding padding to text that is inserted loses because in
# order to make the Z29 not die, one must add so much padding that
# whenever the program tries to use insert mode, the effective
# rate is about 110 baud.
#
# What program would want to put the terminal into insert mode
# and shove stuff at it at 9600 baud you ask?
#
# Emacs. Emacs seems to want to do the mathematically optimal
# thing in doing a redisplay rather than the practical thing.
# When it is about to output a line on top of a line that is
# already on the screen, instead of just killing to the end of
# the line and outputting the new line, it compares the old line
# and the new line and if there are any similarities, it
# constructs the new line by deleting the text on the old line
# on the terminal that is already there and then inserting new
# text into the line to transform it into the new line that is
# to be displayed. The Z29 does not react kindly to this.
#
# But don't cry for too long.... There is a solution. You can make
# a termcap entry for the Z29 that says the Z29 has no insert mode.
# Then Emacs cannot use it. "Oh, no, but now inserting into a
# line will be really slow", you say. Well there is a sort of a
# solution to that too. There is an insert character option on
# the Z29 that will insert one character. Unfortunately, it
# involves putting the terminal into ansi mode, inserting the
# character, and changing it back to H19 mode. All this takes 12
# characters. Pretty expensive to insert one character, but it
# works. Either Emacs doesn't try to use its inserting hack when
# it's only given an insert character ability or the Z29 doesn't
# require padding with this (the former is probably more likely,
# but I haven't checked it out).
# (z29: added empty <acsc> to suppress a tic warning, merged in
# status line capabilities from BRL entry --esr)
z29|zenith29|z29b|zenith z29b,
OTbs, OTpt, am, eslok, hs, mir, msgr,
OTkn#10, cols#80, lines#24,
OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
# z29 in ansi mode. Assumes that the cursor is in the correct state, and that
# the world is stable. <rs1> causes the terminal to be reset to the state
# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
# cursor, bc -> block cursor.
# From: Mike Meyers
# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
# looks vt100-compatible -- esr)
z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
OTbs, OTpt, am, eslok, hs, mir, msgr,
OTkn#10, cols#80, it#8, lines#24,
OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
rmso=\E[m, rmul=\E[m,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
use=z29a,
z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
use=z29a,
z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
use=z29a,
# From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
am, eslok, hs, mc5i, mir, msgr, xon,
cols#80, lines#24,
acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[s\E[>1h\E[25;%i%p1%dH,
# From: Brad Brahms <Brahms@USC-ECLC>
z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
OTbs, OTpt, mir, msgr,
OTkn#10, cols#80, it#8, lines#24,
acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{,
clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
smir=\E@, smso=\Ep,
p19|h19-b with il1/dl1,
dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
# (ztx: removed duplicate :sr: -- esr)
ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
OTbs, am, eslok, hs,
cols#80, it#8, lines#24,
clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
#### IMS International (ims)
#
# There was a company called IMS International located in Carson City,
# Nevada, that flourished from the mid-70s to mid-80s. They made S-100
# bus/Z80 hardware and a line of terminals called Ultimas.
#
# From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
ims950-b|bare ims950 no init string,
is2@, use=ims950,
# (ims950: removed obsolete ":ko@:" -- esr)
ims950|ims televideo 950 emulation,
xenl@,
flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
# (ims950-rv: removed obsolete ":ko@:" -- esr)
ims950-rv|ims tvi950 rev video,
xenl@,
flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
ims-ansi|ultima2|ultimaII|IMS Ultima II,
OTbs, am,
cols#80, it#8, lines#24,
clear=\E[H\E[2J, cub1=^H, cud1=\ED,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
ht=^I, if=/usr/share/tabset/vt100,
is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
smul=\E[4m,
#### Intertec Data Systems
#
# I think this company is long dead as of 1995. They made an early CP/M
# micro called the "Intertec Superbrain" that was moderately popular,
# then sank out of sight.
#
superbrain|intertec superbrain,
OTbs, am, bw,
cols#80, lines#24,
OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
# and the reverse is actually true. Try it. -- esr)
intertube|intertec|Intertec InterTube,
OTbs, am,
cols#80, lines#25,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
ind=^J, rmso=\E0@, smso=\E0P,
# The intertube 2 has the "full duplex" problem like the tek 4025: if you
# are typing and a command comes in, the keystrokes you type get interspersed
# with the command and it messes up
intertube2|intertec data systems intertube 2,
OTbs,
cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
ll=^K^X\r, vpa=\013%p1%c, use=intertube,
#### Ithaca Intersystems
#
# This company made S100-bus personal computers long ago in the pre-IBM-PC
# past. They used to be reachable at:
#
# Ithaca Intersystems
# 1650 Hanshaw Road
# Ithaca, New York 14850
#
# However, the outfit went bankrupt years ago.
#
# The Graphos III was a color graphics terminal from Ithaca Intersystems.
# These entries were written (originally in termcap syntax) by Brian Yandell
# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
# University of Wisconsin.
# (graphos: removed obsolete and syntactically incorrect :kn=4:,
# removed <if=/usr/share/tabset/init.graphos> and
# <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
graphos|graphos III,
am, mir,
cols#80, it#8, lines#24,
clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
smir=\E[4h, smso=\E[7m,
graphos-30|graphos III with 30 lines,
lines#30,
cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
#### Modgraph
#
# These people used to be reachable at:
#
# Modgraph, Inc
# 1393 Main Street,
# Waltham, MA 02154
# Vox: (617)-890-5796.
#
# However, if you call that number today you'll get an insurance company.
# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
# 26 Feb 1997 that says:
#
# Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
# for ~7 years. Modgraph still in business. Products are rugged laptop and
# portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
# panel-mount etc). I can be emailed at sonfour@aol.com
#
# Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
# dated 1984. According to the manual, it featured Tek 4010/4014
# graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
#
modgraph|mod24|modgraph terminal emulating vt100,
xenl@,
cols#80, lines#24,
cvvis=\E\^9;0s\E\^7;1s,
is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
rf@, ri=\EM\E[K$<5/>, use=vt100,
# The GX-1000 manual is dated 1984. This looks rather like a VT-52.
modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
am, da, db,
cols#80, it#8, lines#24,
clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>,
ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
ri=\EI$<5/>,
#
# Modgraph from Nancy L. Cider <nancyc@brl-tbd>
# BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
# If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
# mark and using delete-to-killbuffer work correctly. However, we would
# like normal mode of operation to be using a Modgraph with 48 line setting.
# If we set TERM=mod (which is a valid entry in termcap with 48 lines)
# the setting mark and delete-to-killbuffer results in the deletion of only
# the line the mark is set on.
# We've discovered that the delete-to-killbuffer works correctly
# with TERM=mod and screen set to 80x48 but it's not obvious. Only
# the first line disappears but a ctrl-l shows that it did work
# correctly.
modgraph48|mod|Modgraph w/48 lines,
OTbs, OTpt, am, xenl,
cols#80, it#8, lines#48, vt#3,
OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
smso=\E[7m, smul=\E[4m,
#### Morrow Designs
#
# This was George Morrow's company. They started in the late 1970s making
# S100-bus machines. They used to be reachable at:
#
# Morrow
# 600 McCormick St.
# San Leandro, CA 94577
#
# but they're long gone now (1995).
#
# The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
# Jeff's specimen was dated June 1984.
# From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
mt70|mt-70|Morrow MD-70; native Morrow mode,
am, mir, msgr, xon,
cols#80, it#8, lines#24,
acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
smul=\EG1, tbc=\E0, use=adm+sgr,
#### Motorola
#
# Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
# (Seth H Zirin)
ex155|Motorola Exorterm 155,
OTbs, am, bw,
OTkn#5, OTug#1, cols#80, lines#24,
cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED,
cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU,
home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
#### Omron
#
# This company is still around in 1995, manufacturing point-of-sale systems.
omron|Omron 8025AG,
OTbs, am, da, db,
cols#80, lines#24,
bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
#### Ramtek
#
# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
# were competition for things like the Tektronics 4025.
#
# Ramtek 6221 from BRL, probably by Doug Gwyn
# The following SET-UP modes are assumed for normal operation:
# UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
# NEWLINE_OFF 80_COLUMNS
# Other SET-UP modes may be set for operator convenience or communication
# requirements; I recommend
# SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
# Hardware tabs are assumed to be every 8 columns; they can be set up by the
# "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
# Note that the Control-E key is useless on this brain-damaged terminal. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
rt6221|Ramtek 6221 80x24,
OTbs, OTpt, msgr, xon,
OTkn#4, cols#80, it#8, lines#24, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
rmso=\E[m, rmul=\E[m,
rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
rt6221-w|Ramtek 6221 160x48,
cols#160, lines#48,
ll=\E[48;1H, use=rt6221,
#### RCA
#
# RCA VP3301 or VP3501
rca|rca vp3301/vp3501,
OTbs,
cols#40, lines#24,
clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
#### Selanar
#
# Selanar HiREZ-100 from BRL, probably by Doug Gwyn
# The following SET-UP modes are assumed for normal operation:
# SET_DEFAULT_TABS 48_LINES 80_COLUMNS
# ONLINE ANSI CURSOR_VISIBLE
# VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
# LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
# CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
# For use with graphics software, all graphics modes should be set to factory
# default. Other SET-UP modes may be set for operator convenience or
# communication requirements. No delays are specified; use "stty ixon -ixany"
# to enable DC3/DC1 flow control!
# I commented out the scrolling capabilities since they are too slow.
hirez100|Selanar HiREZ-100,
OTbs, OTpt, mir, msgr, xon,
OTkn#4, cols#80, it#8, lines#48, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
hirez100-w|Selanar HiREZ-100 in 132-column mode,
cols#132, use=hirez100,
#### Signetics
#
# From University of Wisconsin
vsc|Signetics Vsc Video driver by RMC,
am, msgr,
cols#80, it#8, lines#26,
clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
#### Soroc
#
# Alan Frisbie <frisbie@flying-disk.com> writes:
#
# As you may recall, the Soroc logo consisted of their name,
# with the letter "S" superimposed over an odd design. This
# consisted of a circle with a slightly smaller 15 degree (approx.)
# wedge with rounded corners inside it. The color was sort of
# a metallic gold/yellow.
#
# If I had been more of a beer drinker it might have been obvious
# to me, but it took a clue from their service department to make
# me exclaim, "Of course!" The circular object was the top of
# a beer can (the old removable pop-top style) and "Soroc" was an
# anagram for "Coors".
#
# I can just imagine the founders of the company sitting around
# one evening, tossing back a few and trying to decide what to
# call their new company and what to use for a logo.
#
# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
soroc120|iq120|soroc|soroc iq120,
clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, use=adm3a,
soroc140|iq140|soroc iq140,
OTbs, am, mir,
cols#80, lines#24,
bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
#### Southwest Technical Products
#
# These guys made an early personal micro called the M6800.
# The ct82 was probably its console terminal.
#
# (swtp: removed obsolete ":bc=^D:" -- esr)
swtp|ct82|southwest technical products ct82,
am,
cols#82, lines#20,
bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
#### Synertek
#
# Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
#
# Synertek used to make ICs, various 6502-based single-board process
# control and hobbyist computers, and assorted peripherals including a
# series of small inexpensive terminals (I think they were one of the
# first to have a "terminal-on-a-keyboard", where the terminal itself
# was only slightly larger than the keyboard).
#
# They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
# was a 40x24 terminal that could connect to a standard TV through a
# video modulator. The KTM-2/80 was the 80-column version (the 2/40
# could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
# I have a KTM-2/80 still in working order. The KTM-2s had fully
# socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
# ROM and 2 ROMs as character generators. They were incredibly simple,
# and I've never had any problems with mine (witness the fact that mine
# was made in 1981 and is still working great... I've blown the video
# output transistor a couple of times, but it's a 2N2222 :-)
#
# The KTM-3 (which is what is listed in the terminfo file) was their
# attempt at putting a KTM-2 in a box (and some models came with a
# CRT). It wasn't much different from the KTM-2 hardware-wise, but the
# control and escape sequences are very different. The KTM-3 was always
# real broken, at least according to the folks I've talked to about it.
#
# The padding in the entry is probably off--these terminals were very
# slow (it takes like 100ms for the KTM-2 to clear the screen...) And
# anyone with any sanity replaced the ROMs with something that provided
# a reasonable subset of VT100 functionality, since the usual ROMs were
# obviously very primitive... oh, you could get an upgraded ROM from
# Synertek for some incredible amount of money, but what hacker with an
# EPROM burner would do that? :)
#
# Sorry I don't have any contact info; I believe they were located in
# Sunnyvale, and I'm fairly sure they are still manufacturing ICs
# (they've gone to ASICs and FPGAs), but I doubt they're in the computer
# business these days.
#
# Tested, seems to work fine with vi.
synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
am,
cols#80, lines#24,
clear=^Z, cub1=^H, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
#### Tab Office Products
#
# TAB Products Co. - Palo Alto, California
# Electronic Office Products,
# 1451 California Avenue 94304
#
# I think they're out of business.
#
# The tab 132 uses xon/xoff, so no padding needed.
# <smkx>/<rmkx> have nothing to do with arrow keys.
# <is2> sets 80 col mode, normal video, autowrap on (for <am>).
# Seems to be no way to get rid of status line.
# The manual for this puppy was dated June 1981. It claims to be VT52-
# compatible but looks more vt100-like.
tab132|tab|tab132-15|tab 132/15,
da, db,
OTdN@, cols#80, lines#24, lm#96,
cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
tab132-w|tab132 in wide mode,
cols#132,
is2=\E[?7h\E[?3h\E[?5l, use=tab132,
tab132-rv|tab132 in reverse-video mode,
is2=\E[?7h\E[?3l\E[?5h, use=tab132,
tab132-w-rv|tab132 in reverse-video/wide mode,
is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
#### Teleray
#
# Research Incorporated
# 6425 Flying Cloud Drive
# Eden Prairie, MN 55344
# Vox: (612)-941-3300
#
# The Teleray terminals were all discontinued in 1992-93. RI still services
# and repairs these beasts, but no longer manufactures them. The Teleray
# people believe that all the types listed below are very rare now (1995).
# There was a newer line of Telerays (Model 7, Model 20, Model 30, and
# Model 100) that were ANSI-compatible.
#
# Note two things called "teleray". Reorder should move the common one
# to the front if you have either. A dumb teleray with the cursor stuck
# on the bottom and no obvious model number is probably a 3700.
#
t3700|dumb teleray 3700,
OTbs,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
t3800|teleray 3800 series,
OTbs,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
home=\EH, ht=^I, ind=^J, ll=\EY7\s,
t1061|teleray|teleray 1061,
OTbs, am, km, xhp, xt,
cols#80, it#8, lines#24, xmc#1,
bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
tbc=\EG,
t1061f|teleray 1061 with fast PROMs,
dl1=\EM, il1=\EL, ip@, use=t1061,
# "Teleray Arpa Special", officially designated as
# "Teleray Arpa network model 10" with "Special feature 720".
# This is the new (1981) fast microcode updating the older "arpa" proms
# (which gave meta-key and programmable-fxn keys). 720 is much much faster,
# converts the keypad to programmable function keys, and has other goodies.
# Standout mode is still broken (magic cookie, etc) so is suppressed as no
# programs handle such lossage properly.
# Note: this is NOT the old termcap's "t1061f with fast proms."
# From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
# (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
t10|teleray 10 special,
OTbs, km, xhp, xt,
cols#80, it#8, lines#24, xmc#2,
clear=\Ej$<30/>, cub1=^H, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
smul=\ERH,
# teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
# back/forth words. Put the function keys (f1-f10) where they can be
# found, and turn off the other magic keys along the top row, except
# for line/local. Do the magic appropriate to make the page shifts work.
# Also toggle ^S/^Q for those of us who use Emacs.
t16|teleray 16,
am, da, db, mir, xhp, xt,
cols#80, lines#24,
bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
#### Texas Instruments (ti)
#
# The Silent 700 was so called because it was built around a quiet thermal
# printer. It was portable, equipped with an acoustic coupler, and pretty
# neat for its day.
ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
OTbs, hc, os,
cols#80,
bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
#
# Texas Instruments 916 VDT 7 bit control mode
#
ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
da, db, in, msgr,
cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
use=vt220,
#
# Texas Instruments 916 VDT 8 bit control mode
#
ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
#
# Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
#
ti916-132|Texas Instruments 916 VDT vt220 132 column,
cols#132, use=ti916,
#
# Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
#
ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
cols#132, use=ti916-8,
ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
OTbs, am, xon,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
am, xon,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
cols#132, use=ti924,
ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
cols#132, use=ti924-8,
ti931|Texas Instruments 931 VDT,
OTbs, am, xon,
cols#80, lines#24,
bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
sgr0=\E4@, smso=\E4A, smul=\E4D,
ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
csr@, ind=\E[1S, ri=\E[1T, use=ti924,
# (ti926-8: I corrected this from the broken SCO entry -- esr)
ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
csr@, ind=\2331S, ri=\2331T, use=ti924-8,
ti_ansi|basic entry for ti928,
am, bce, eo, xenl, xon,
colors#8, cols#80, it#8, lines#25, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
smso=\E[7m, smul=\E[4m,
#
# 928 VDT 7 bit control mode
#
ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
#
# 928 VDT 8 bit control mode
#
ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
kpp=\233T, kprt=\23335~, use=ti_ansi,
#### Zentec (zen)
#
# (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
# had just <smso>=\EG6 which I think means standout was supposed to be
# dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
# <invis> might work-- esr)
zen30|z30|zentec 30,
OTbs, am, mir, ul,
cols#80, lines#24,
bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
smul@, use=adm+sgr,
# (zen50: this had extension capabilities
# :BS=^U:CL=^V:CR=^B:
# UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
# which were also in the original entry -- esr)
# (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
zen50|z50|zentec zephyr,
OTbs, am,
cols#80, lines#24, xmc#1,
clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
rmul@, smul@, use=adm+sgr,
# CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
OTbs, am, bw,
cols#80, lines#24,
blink=\EM", clear=\EH\EJ, cnorm=\EP,
csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
smso=\EM$, smul=\EM0,
######## OBSOLETE UNIX CONSOLES
#
#### Apollo consoles
#
# Apollo got bought by Hewlett-Packard. The Apollo workstations are
# labeled HP700s now.
#
# From: Gary Darland <goodmanc@garnet.berkeley.edu>
apollo|apollo console,
OTbs, am, mir,
cols#88, lines#53,
clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
smso=\ES, smul=\EU, vpa=\EO+\s,
# We don't know whether or not the apollo guys replicated DEC's firmware bug
# in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
# both these capabilities.
apollo_15P|apollo 15 inch display,
rmir@, smir@, use=vt132,
apollo_19L|apollo 19 inch display,
rmir@, smir@, use=vt132,
apollo_color|apollo color display,
rmir@, smir@, use=vt132,
#### Convergent Technology
#
# Burroughs bought Convergent shortly before it merged with Univac.
# CTOS is (I believe) dead. Probably the aws is too (this entry dates
# from 1991 or earlier).
#
# Convergent AWS workstation from Gould/SEL UTX/32 via BRL
# (aws: removed unknown :dn=^K: -- esr)
aws|Convergent Technologies AWS workstation under UTX and Xenix,
am,
OTug#0, cols#80, lines#28, xmc#0,
OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
vpa=\EV%p1%c,
awsc|Convergent Technologies AWS workstation under CTOS,
am,
OTug#0, cols#80, lines#24, xmc#0,
OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
smul=\EAC,
#### DEC consoles
#
# The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
# The digital uVax II's had a graphic display called a qdss. It was
# supposed to be a high performance graphic accelerator, but it was
# late to market and barely appeared before faster dumb frame buffers
# appeared. I have only used this display while running X11. However,
# during bootup, it was in text mode, and probably had a terminal emulator
# within it. And that is what your termcap entry is for. In graphics
# mode the screen size is 1024x864 pixels.
qdss|qdcons|qdss glass tty,
OTbs, am,
cols#128, lines#57,
clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%c%p2%c, cuu1=^K,
#### Fortune Systems consoles
#
# Fortune made a line of 68K-based UNIX boxes that were pretty nifty
# in their day; I (esr) used one myself for a year or so around 1984.
# They had no graphics, though, and couldn't compete against Suns and
# the like. R.I.P.
#
# From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
# (This had extension capabilities
# :rv=\EH:re=\EI:rg=0:GG=0:\
# :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
# :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
# :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
# It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
# ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
# to force both magic cookie glitches off. Once upon a time, I
# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
# function keys; thus the "Al" value for HM was certainly an error. I renamed
# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
# names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
fos|fortune|Fortune system,
OTbs, am, bw,
cols#80, lines#25,
acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
smso=^\H`, smul=^\HP,
#### Masscomp consoles
#
# Masscomp has gone out of business. Their product line was purchased by
# comany in Georgia (US) called "XS International", parts and service may
# still be available through them.
#
# (masscomp: ":MT:" changed to ":km:"; -- esr)
masscomp|masscomp workstation console,
OTbs, km, mir,
cols#80, it#8, lines#24,
clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
masscomp1|masscomp large screen version 1,
cols#104, lines#36, use=masscomp,
masscomp2|masscomp large screen version 2,
cols#64, lines#21, use=masscomp,
######## OTHER OBSOLETE TYPES
#
# These terminals are *long* dead -- these entries are retained for
# historical interest only.
#
#### Obsolete non-ANSI software emulations
#
# CTRM terminal emulator
# 1. underlining is not allowed with colors: first, is is simulated by
# black on white, second, it disables background color manipulations.
# 2. BLINKING, REVERSE and BOLD are allowed with colors,
# so we have to save their status in the static registers A, B and H
# respectively, to be able to restore them when color changes
# (because any color change turns off ALL attributes)
# 3. <bold> and <rev> sequences alternate modes,
# rather than simply entering them. Thus we have to check the
# static register B and H to determine the status, before sending the
# escape sequence.
# 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
# and then reset colors
# 5. implementation of the protect mode would badly penalize the performance.
# we would have to use \E&bn sequence to turn off colors (as well as all
# other attributes), and keep the status of protect mode in yet another
# static variable. If someone really needs this mode, they would have to
# create another terminfo entry.
# 6. original color-pair is white on black.
# store the information about colors into static registers
# 7. set foreground color. it performs the following steps.
# 1) turn off all attributes
# 2) turn on the background and video attributes that have been turned
# on before (this information is stored in static registers X,Y,Z,A,B,H,D).
# 3) turn on foreground attributes
# 4) store information about foreground into U,V,W static registers
# 8. turn on background: similar to turn on foreground above
ctrm|C terminal emulator,
am, bce, xon,
colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
pairs#63, pb#19200, vt#6,
bel=^G, blink=\E&dA%{1}%PA,
bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# gs6300 - can't use blue foreground, it clashes with underline;
# it's simulated with cyan
# Bug: The <op> capability probably resets attributes.
# (gs6300: commented out <rmln> (no <smln>) --esr)
gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
am, bce, msgr, xon,
colors#8, cols#80, it#8, lines#24, pairs#63,
acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
# From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
# MS-Kermit with Heath-19 emulation mode enabled
# (h19k: changed ":pt@:" to ":it@"
h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
am@, da, db, xt,
it@,
ht@, use=h19-u,
# Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
# Software (formerly Peripherals Computers & Supplies, Inc) of
# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
# also be reached at support@synergy.com.
versaterm|versaterm vt100 emulator for the macintosh,
am, xenl,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
smul=\E[4m$<2/>,
# From: Rick Thomas <ihnp4!btlunix!rbt>
# (xtalk: I added <rmam>/<smam> based on the init string.
xtalk|IBM PC with xtalk communication program (versions up to 3.4),
am, mir, msgr, xon,
cols#80, it#8, lines#24, vt#3, xmc#1,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m\s,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
tbc=\E[3g, use=vt100+fnkeys,
# The official PC terminal emulator program of the AT&T Product Centers.
# Note - insert mode commented out - doesn't seem to work on AT&T PC.
simterm|attpc running simterm,
am,
cols#80, lines#24,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
#### Daisy wheel printers
#
# This section collects Diablo, DTC, Xerox, Qume, and other daisy
# wheel terminals. These are now largely obsolete.
#
# (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
hc, os,
cols#132, it#8,
cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
cols#124,
is2=\r \E9, use=diablo1620,
# (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
use=diablo1620,
# (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
# file -- esr)
diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
cols#124,
rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
use=diablo1640-lm,
# DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
# <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
# The terminal has tabs, but I'm getting tired of fighting the braindamage.
# If no tab is set or the terminal's in a bad mood, it glitches the screen
# around all of memory. Note that return puts a blank ("a return character")
# in the space the cursor was at, so we use ^P return (and thus ^P newline for
# newline). Note also that if you turn off :pt: and let Unix expand tabs,
# curses won't work (some old BSD versions) because it doesn't clear this bit,
# and cursor addressing sends a tab for row/column 9. What a losing terminal!
# I have been unable to get tabs set in all 96 lines - it always leaves at
# least one line with no tabs in it, and once you tab through that line,
# it completely weirds out.
# (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
dtc382|DTC 382,
am, da, db, xhp,
cols#80, lines#24, lm#96,
bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
dtc300s|DTC 300s,
hc, os,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
gsi|mystery gsi terminal,
hc, os,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
ind=^J,
aj830|aj832|aj|anderson jacobson,
hc, os,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
ind=^J,
# From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
aj510|Anderson-Jacobson model 510,
am, mir,
cols#80, lines#24,
clear=^L, cub1=^H, cuf1=\EX,
cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
smul=\E"U,
# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
# This is incomplete, but it's a start.
nec5520|nec|spinwriter|nec 5520,
hc, os,
cols#132, it#8,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
kbs=^H, tbc=\E3,
qume5|qume|Qume Sprint 5,
hc, os,
cols#80, it#8,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
# I suspect the xerox 1720 is the same as the diablo 1620.
xerox1720|x1720|x1750|xerox 1720,
hc, os,
cols#132, it#8,
bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
tbc=\E2,
#### Miscellaneous obsolete terminals, manufacturers unknown
#
# If you have any information about these (like, a manufacturer's name,
# and a date on the serial-number plate) please send it!
cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
OTbs, am,
cols#73, lines#36,
clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
OTbs, am,
cols#85, lines#39,
clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
kf4=\E8, rmso=\Em^C, smso=\Em^L,
cops10|cops|cops-10|cops 10,
am, bw,
cols#80, lines#24,
bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
khome=^Y,
# (d132: removed duplicate :ic=\E5:,
# merged in capabilities from a BRL entry -- esr)
d132|datagraphix|datagraphix 132a,
da, db, in,
cols#80, lines#30,
bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
# The d800 was an early portable terminal from c.1984-85 that looked a lot
# like the original Compaq `lunchbox' portable (but no handle). It had a vt220
# mode (which is what this entry looks like) and several other lesser-known
# emulations.
d800|Direct 800/A,
OTbs, am, da, db, msgr, xhp,
cols#80, it#8, lines#24,
acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smacs=\E[1m, smso=\E[7m, smul=\E[4m,
digilog|digilog 333,
OTbs,
cols#80, lines#16,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
home=^N, ind=^J,
# The DWK was a terminal manufactured in the Soviet Union c.1986
dwk|dwk-vt|dwk terminal,
am,
cols#80, it#8, lines#24,
acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
sgr0=\EX, smacs=\EF, smso=\ET,
env230|envision230|envision 230 graphics terminal,
xenl@,
mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
use=vt100,
# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
# coupler attached, the whole rig fitting in a suitcase and more or less
# portable. Hot stuff for c.1977 :-) -- esr
ep48|ep4080|execuport 4080,
OTbs, am, os,
cols#80,
bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
ep40|ep4000|execuport 4000,
cols#136, use=ep4080,
# Adam Thompson <athompso@pangea.ca> tells us:
# Informer series - these are all portable units, resembling older
# automatic bread-baking machines. The terminal looks like a `clamshell'
# design, but isn't. The structure is similar to the Direct terminals,
# but only half the width. The entire unit is only about 10" wide.
# It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
# keyboard. All the keys are crammed together, much like some laptop
# PCs today, but perhaps less well organized...all these units have a
# bewildering array of plugs on the back, including a built-in modem.
# The 305 was a color version of the 304; the 306 and 307 were mono and
# color terminals built for IBM bisync protocols.
# From: Paul Leondis <unllab@amber.berkeley.edu>
ifmr|Informer D304,
OTbs, am,
cols#80, lines#24,
clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
smso=\EJ,
# Entry largely based on wy60 and has the features of wy60ak.
opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
am, bw, hs, km, mir, msgr, ul, xon,
cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
ip=$<3>,
is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
pfx=\EZ1%p1%{63}%+%c%p2%s\177,
pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
rs3=\EwG\Ee($<150>,
sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
uc=\EG8\EG0, use=adm+sgr,
teletec|Teletec Datascreen,
OTbs, am,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
home=^^, ind=^J,
# From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
# This description is for the LANPAR Technologies VISION 3220
# terminal from 1984/85. The function key definitions k0-k5 represent the
# edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
# NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
#
# Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
# I had a couple of scopes (3221) like this once where I used to work, around
# the 1987 time frame if memory serves me correctly. These scopes were made
# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
# compatible. The 3220 was a plain text terminal like the VT-220, the 3221
# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
# was like the VT-241 (color with Regis + Sixel Graphics). These terminals
# (3221) cost about $1500 each, and one was always broken -- had to be sent
# back to the shop for repairs.
# The only real advantage these scopes had over the VT-240's were:
# 1) They were faster in the Regis display, or at least the ones I did
# 2) They had a handy debugging feature where you could split-screen the
# scope, the graphics would appear on the top, and the REGIS commands would
# appear on the bottom. I don't remember the VT-240s being able to do that.
# I would swear that LANPAR Technologies was in MA someplace, but since I
# don't work at the same place anymore, and those terminals and manuals were
# long since junked, I cannot be any more sure than that.
#
# (v3220: removed obsolete ":kn#10:",
# I added <rmam>/<smam> based on the init string -- esr)
v3220|LANPAR Vision II model 3220/3221/3222,
OTbs, am, mir, xenl,
cols#80, it#8, lines#24,
clear=\E[H\E[J, cub1=^H, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
######## ICH/ICH1 VERSUS RMIR/SMIR
#
# Some non-curses applications get confused if both ich/ich1 and rmir/smir
# are present; the symptom is doubled characters in an update using insert.
# These applications are technically correct; in both 4.3BSD termcap and
# terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
# unless the terminal needs both. To my knowledge, no terminal still in this
# file requires both other than the very obsolete dm2500.
#
# For ncurses-based applications this is not a problem, as ncurses uses
# one or the other as appropriate but never mixes the two. Therefore we
# have not corrected entries like `linux' and `xterm' that specify both.
# If you see doubled characters from these, use the linux-nic and xterm-nic
# entries that suppress ich/ich1. And upgrade to ncurses!
#
######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
#
# ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
# ECMA-48 standards are said to be almost identical, but are not the same
# as X3.64 (though for practical purposes they are close supersets of it).
#
# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
# Coded Character Sets"), include your snail-mail address, and you should
# receive the document in due course. Don't expect an email acknowledgement.
#
# Related standards include "X3.4-1977: American National Standard Code for
# Information Interchange" (the ASCII standard) and "X3.41.1974:
# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
# American National Standard for Information Interchange." I believe (but
# am not certain) that these are effectively identical to ECMA-6 and ECMA-35
# respectively.
#
#### VT100/ANSI/ECMA-48
#
# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
# and ECMA-48 Control Functions for Coded Character Sets.
#
# Much of the content of this comment is adapted from a table prepared by
# Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
# discussion of some terminfo-related issues, and updates to capture ECMA-48
# have been added. Control functions described in ECMA-48 only are tagged
# with * after their names.
#
# The table is a complete list of the defined ANSI X3.64/ECMA-48 control
# sequences. In the main table, \E stands for an escape (\033) character,
# SPC for space. Pn stands for a single numeric parameter to be inserted
# in decimal ASCII. Ps stands for a list of such parameters separated by
# semicolons. Parameter meanings for most parametrized sequences are
# decribed in the notes.
#
# Sequence Sequence Parameter or
# Mnemonic Name Sequence Value Mode terminfo
# -----------------------------------------------------------------------------
# APC Applicatn Program Command \E _ - Delim -
# BEL Bell * ^G - - bel
# BPH Break Permitted Here * \E B - * -
# BS Backpace * ^H - EF -
# CAN Cancel * ^X - - - (A)
# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
# CCH Cancel Previous Character \E T - - -
# CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
# CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
# CMD Coding Method Delimiter * \E
# CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
# CPL Cursor Preceding Line \E [ Pn F 1 eF -
# CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
# CSI Control Sequence Intro \E [ - Intro -
# CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
# CUB Cursor Backward \E [ Pn D 1 eF cub
# CUD Cursor Down \E [ Pn B 1 eF cud
# CUF Cursor Forward \E [ Pn C 1 eF cuf
# CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
# CUU Cursor Up \E [ Pn A 1 eF cuu
# CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
# DA Device Attributes \E [ Pn c 0 - -
# DAQ Define Area Qualification \E [ Ps o 0 - -
# DCH Delete Character \E [ Pn P 1 eF dch
# DCS Device Control String \E P - Delim -
# DL Delete Line \E [ Pn M 1 eF dl
# DLE Data Link Escape * ^P - - -
# DMI Disable Manual Input \E \ - Fs -
# DSR Device Status Report \E [ Ps n 0 - - (I)
# DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
# EA Erase in Area \E [ Ps O 0 eF - (J)
# ECH Erase Character \E [ Pn X 1 eF ech
# ED Erase in Display \E [ Ps J 0 eF ed (J)
# EF Erase in Field \E [ Ps N 0 eF -
# EL Erase in Line \E [ Ps K 0 eF el (J)
# EM End of Medium * ^Y - - -
# EMI Enable Manual Input \E b Fs -
# ENQ Enquire ^E - - -
# EOT End Of Transmission ^D - * -
# EPA End of Protected Area \E W - - - (K)
# ESA End of Selected Area \E G - - -
# ESC Escape ^[ - - -
# ETB End Transmission Block ^W - - -
# ETX End of Text ^C - - -
# FF Form Feed ^L - - -
# FNK Function Key * \E [ Pn SPC W - - -
# GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
# FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
# GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
# GSS Graphic Size Selection \E [ Pn SPC C none FE -
# HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
# HPB Char Position Backward \E [ j 1 FE -
# HPR Horz Position Relative \E [ Pn a 1 FE - (M)
# HT Horizontal Tab * ^I - FE - (N)
# HTJ Horz Tab w/Justification \E I - FE -
# HTS Horizontal Tab Set \E H - FE hts
# HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
# ICH Insert Character \E [ Pn @ 1 eF ich
# IDCS ID Device Control String \E [ SPC O - * -
# IGS ID Graphic Subrepertoire \E [ SPC M - * -
# IL Insert Line \E [ Pn L 1 eF il
# IND Index \E D - FE -
# INT Interrupt \E a - Fs -
# JFY Justify \E [ Ps SPC F 0 FE -
# IS1 Info Separator #1 * ^_ - * -
# IS2 Info Separator #1 * ^^ - * -
# IS3 Info Separator #1 * ^] - * -
# IS4 Info Separator #1 * ^\ - * -
# LF Line Feed ^J - - -
# LS1R Locking Shift Right 1 * \E ~ - - -
# LS2 Locking Shift 2 * \E n - - -
# LS2R Locking Shift Right 2 * \E } - - -
# LS3 Locking Shift 3 * \E o - - -
# LS3R Locking Shift Right 3 * \E | - - -
# MC Media Copy \E [ Ps i 0 - - (S)
# MW Message Waiting \E U - - -
# NAK Negative Acknowledge * ^U - * -
# NBH No Break Here * \E C - - -
# NEL Next Line \E E - FE nel (D)
# NP Next Page \E [ Pn U 1 eF -
# NUL Null * ^@ - - -
# OSC Operating System Command \E ] - Delim -
# PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
# PFS Page Format Selection * \E Pn SPC J 0 - -
# PLD Partial Line Down \E K - FE - (T)
# PLU Partial Line Up \E L - FE - (U)
# PM Privacy Message \E ^ - Delim -
# PP Preceding Page \E [ Pn V 1 eF -
# PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
# PPB Page Position Backward * \E [ Pn SPC R 1 FE -
# PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
# PTX Parallel Texts * \E [ \ - - -
# PU1 Private Use 1 \E Q - - -
# PU2 Private Use 2 \E R - - -
# QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
# REP Repeat Char or Control \E [ Pn b 1 - rep
# RI Reverse Index \E M - FE - (V)
# RIS Reset to Initial State \E c - Fs -
# RM Reset Mode * \E [ Ps l - - - (W)
# SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
# SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
# SCI Single-Char Introducer \E Z - - -
# SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
# SCS Set Char. Spacing * \E [ Pn SPC g - - -
# SD Scroll Down \E [ Pn T 1 eF rin
# SDS Start Directed String * \E [ Pn ] 1 - -
# SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
# SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
# SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
# SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
# SI Shift In ^O - - - (P)
# SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
# SL Scroll Left \E [ Pn SPC @ 1 eF -
# SLH Set Line Home * \E [ Pn SPC U - - -
# SLL Set Line Limit * \E [ Pn SPC V - - -
# SLS Set Line Spacing * \E [ Pn SPC h - - -
# SM Select Mode \E [ Ps h none - - (W)
# SO Shift Out ^N - - - (Q)
# SOH Start Of Heading * ^A - - -
# SOS Start of String * \E X - - -
# SPA Start of Protected Area \E V - - - (Z)
# SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
# SPH Set Page Home * \E [ Ps SPC G - - -
# SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
# SPL Set Page Limit * \E [ Ps SPC j - - -
# SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
# SR Scroll Right \E [ Pn SPC A 1 eF -
# SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
# SRS Start Reversed String * \E [ Ps [ 0 - -
# SSA Start of Selected Area \E F - - -
# SSU Select Size Unit * \E [ Pn SPC I 0 - -
# SSW Set Space Width * \E [ Pn SPC [ none - -
# SS2 Single Shift 2 (G2 set) \E N - Intro -
# SS3 Single Shift 3 (G3 set) \E O - Intro -
# ST String Terminator \E \ - Delim -
# STAB Selective Tabulation * \E [ Pn SPC ^ - - -
# STS Set Transmit State \E S - - -
# STX Start pf Text * ^B - - -
# SU Scroll Up \E [ Pn S 1 eF indn
# SUB Substitute * ^Z - - -
# SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
# SYN Synchronous Idle * ^F - - -
# TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
# TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
# TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
# TBC Tab Clear \E [ Ps g 0 FE tbc
# TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
# TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
# TSS Thin Space Specification \E [ Pn SC E none FE -
# VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
# VPB Line Position Backward * \E [ Pn k 1 FE -
# VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
# VT Vertical Tabulation * ^K - FE -
# VTS Vertical Tabulation Set \E J - FE -
#
# ---------------------------------------------------------------------------
#
# Notes:
#
# Some control characters are listed in the ECMA-48 standard without
# being assigned functions relevant to terminal control there (they
# referred to other standards such as ISO 1745 or ECMA-35). They are listed
# here anyway for completeness.
#
# (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
#
# (B) There seems to be some confusion abroad between CHA and HPA. Most
# `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
# the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
# preserved the CHA abbreviation.
#
# (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
# Occasionally (as on, for example, certain HP terminals) this has the HTJ
# value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
# CHT abbreviation.
#
# (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
#
# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
# abbreviation.
#
# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
# char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
# 5 = clear all char tabs, 6 = clear all line tabs.
#
# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
# Position Absolute" but retains the HVP abbreviation.
#
# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
# abbreviation.
#
# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
# DSR, 6 = request CPR response.
#
# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
# 1 = clear from beginning, 2 = clear.
#
# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
#
# (L) The GSM parameters are vertical and horizontal parameters to scale by.
#
# (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
# use CUF for this function and ignore HPR. ECMA-48 calls this "Character
# Position Relative" but retains the HPR abbreviation.
#
# (N) ECMA-48 calls this "Character Tabulation" but retains the HT
# abbreviation.
#
# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
# 61-65 = variable highlights for ideograms.
#
# (P) SI is also called LSO, Locking Shift Zero.
#
# (Q) SI is also called LS1, Locking Shift One.
#
# (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
# use CUD for this function and ignore VPR. ECMA calls it `Line Position
# Absolute' but retains the VPA abbreviation.
#
# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
# from secondary aux device, 4 = stop relay to primary aux device, 5 =
# start relay to primary aux device, 6 = stop relay to secondary aux device,
# 7 = start relay to secondary aux device.
#
# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
# abbreviation.
#
# (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
# abbreviation.
#
# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
#
# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
# from ECMA-48's 5th edition but are listed here for reference.
#
# (X) Select Alternate Presentation Variants is used only for non-Latin
# alphabets.
#
# (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
#
# (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
# abbreviation.
#
# ---------------------------------------------------------------------------
#
# Abbreviations:
#
# Intro an Introducer of some kind of defined sequence; the normal 7-bit
# X3.64 Control Sequence Introducer is the two characters "Escape ["
#
# Delim a Delimiter
#
# x/y identifies a character by position in the ASCII table (column/row)
#
# eF editor function (see explanation)
#
# FE format effector (see explanation)
#
# F is a Final character in
# an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
# a control sequence (F from 4/0 to 7/14)
#
# Gs is a graphic character appearing in strings (Gs ranges from
# 2/0 to 7/14) in the ASCII table
#
# Ce is a control represented as a single bit combination in the C1 set
# of controls in an 8-bit character set
#
# C0 the familiar set of 7-bit ASCII control characters
#
# C1 roughly, the set of control chars available only in 8-bit systems.
# This is too complicated to explain fully here, so read Jim Fleming's
# article in the February 1983 BYTE, especially pages 214 through 224.
#
# Fe is a Final character of a 2-character Escape sequence that has an
# equivalent representation in an 8-bit environment as a Ce-type
# (Fe ranges from 4/0 to 5/15)
#
# Fs is a Final character of a 2-character Escape sequence that is
# standardized internationally with identical representation in 7-bit
# and 8-bit environments and is independent of the currently
# designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
#
# I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
# ASCII table
#
# P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
# table
#
# Pn is a numeric parameter in a control sequence, a string of zero or
# more characters ranging from 3/0 to 3/9 in the ASCII table
#
# Ps is a variable number of selective parameters in a control sequence
# with each selective parameter separated from the other by the code
# 3/11 (which usually represents a semicolon); Ps ranges from
# 3/0 to 3/9 and includes 3/11
#
# * Not relevant to terminal control, listed for completeness only.
#
# Format Effectors versus Editor Functions
#
# A format effector specifies how following output is to be displayed.
# An editor function allows you to modify the display. Informally
# format effectors may be destructive; format effectors should not be.
#
# For instance, a format effector that moves the "active position" (the
# cursor or equivalent) one space to the left would be useful when you want to
# create an overstrike, a compound character made of two standard characters
# overlaid. Control-H, the Backspace character, is actually supposed to be a
# format effector, so you can do this. But many systems use it in a
# nonstandard fashion, as an editor function, deleting the character to the
# left of the cursor and moving the cursor left. When Control-H is assumed to
# be an editor function, you cannot predict whether its use will create an
# overstrike unless you also know whether the output device is in an "insert
# mode" or an "overwrite mode". When Control-H is used as a format effector,
# its effect can always be predicted. The familiar characters carriage
# return, linefeed, formfeed, etc., are defined as format effectors.
#
# NOTES ON THE DEC VT100 IMPLEMENTATION
#
# Control sequences implemented in the VT100 are as follows:
#
# CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
# LNM, NEL, RI, RIS, RM, SGR, SM, TBC
#
# plus several private DEC commands.
#
# Erasing parts of the display (EL and ED) in the VT100 is performed thus:
#
# Erase from cursor to end of line Esc [ 0 K or Esc [ K
# Erase from beginning of line to cursor Esc [ 1 K
# Erase line containing cursor Esc [ 2 K
# Erase from cursor to end of screen Esc [ 0 J or Esc [ J
# Erase from beginning of screen to cursor Esc [ 1 J
# Erase entire screen Esc [ 2 J
#
# Some brain-damaged terminal/emulators respond to Esc [ J as if it were
# Esc [ 2 J, but this is wrong; the default is 0.
#
# The VT100 responds to receiving the DA (Device Attributes) control
#
# Esc [ c (or Esc [ 0 c)
#
# by transmitting the sequence
#
# Esc [ ? l ; Ps c
#
# where Ps is a character that describes installed options.
#
# The VT100's cursor location can be read with the DSR (Device Status
# Report) control
#
# Esc [ 6 n
#
# The VT100 reports by transmitting the CPR sequence
#
# Esc [ Pl ; Pc R
#
# where Pl is the line number and Pc is the column number (in decimal).
#
# The specification for the DEC VT100 is document EK-VT100-UG-003.
#### ANSI.SYS
#
# Here is a description of the color and attribute controls supported in the
# the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
# terminal emulators for Intel boxes obey these. They are a proper subset
# of the ECMA-48 escapes.
#
# 0 all attributes off
# 1 foreground bright
# 4 underscore on
# 5 blink on/background bright (not reliable with brown)
# 7 reverse-video
# 8 set blank (non-display)
# 10 set primary font
# 11 set first alternate font (on PCs, display ROM characters 1-31)
# 12 set second alternate font (on PCs, display IBM high-half chars)
#
# Color attribute sets
# 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
# 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
# Bright black becomes gray. Bright brown becomes yellow,
# These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
#
# * If the 5 attribute is on and you set a background color (40-47) it is
# supposed to enable bright background.
#
# * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
# when you try to set a "bright brown" (yellow) background with attribute
# 5 (you get a blinking yellow foreground instead). A few displays
# (including the System V console) support an attribute 6 that undoes this
# braindamage (this is required by iBCS2).
#
# * Some older versions of ANSI.SYS have a bug that causes thems to require
# ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
# compatible.)
#### Intel Binary Compatibility Standard
#
# For comparison, here are the capabilities implied by the Intel Binary
# Compatibility Standard for UNIX systems (Intel order number 468366-001).
# These recommendations are optional. IBCS2 allows the leading escape to
# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
# the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
# (as described in figure 9-3 of the standard). Those expressed in the ibcs2
# terminfo entry are followed with the corresponding capability in parens:
#
# CSI <n>k disable (n=0) or enable (n=1) keyclick
# CSI 2h lock keyboard
# CSI 2i send screen as input
# CSI 2l unlock keyboard
# CSI 6m enable background color intensity
# CSI <0-2>c reserved
# CSI <0-59>m select graphic rendition
# CSI <n>;<m>H (cup) cursor to line n and column m
# CSI <n>;<m>f cursor to line n and column m
# CSI <n>@ (ich) insert characters
# CSI <n>A (cuu) cursor up n lines
# CSI <n>B (cud) cursor down n lines
# CSI <n>C (cuu) cursor right n characters
# CSI <n>D (cud) cursor left n characters
# CSI <n>E cursor down n lines and in first column
# CSI <n>F cursor up n lines and in first column
# CSI <n>G (hpa) position cursor at column n-1
# CSI <n>J (ed) erase in display
# CSI <n>K (el) erase in line
# CSI <n>L (il) insert line(s)
# CSI <n>P (dch) delete characters
# CSI <n>S (indn) scroll up n lines
# CSI <n>T (rin) scroll down n lines
# CSI <n>X (ech) erase characters
# CSI <n>Z (cbt) back up n tab stops
# CSI <n>` cursor to column n on line
# CSI <n>a (cuu) cursor right n characters
# CSI <n>d (vpa) cursor to line n
# CSI <n>e cursor down n lines and in first column
# CSI <n>g (cbt) clear all tabs
# CSI <n>z make virtual terminal n active
# CSI ?7h (smam) turn automargin on
# CSI ?7l (rmam) turn automargin off
# CSI s save cursor position
# CSI u restore cursor position to saved value
# CSI =<c>A set overscan color
# CSI =<c>F set normal foreground color
# CSI =<c>G set normal background color
# CSI =<c>H set reverse foreground color
# CSI =<c>I set reverse foreground color
# CSI =<c>J set graphic foreground color
# CSI =<c>K set graphic foreground color
# CSI =<n>g (dispc) display n from alternate graphics character set
# CSI =<p>;<d>B set bell parameters
# CSI =<s>;<e>C set cursor parameters
# CSI =<x>D enable/disable intensity of background color
# CSI =<x>E set/clear blink vs. bold background
# CSI 7 (sc) (sc) save cursor position
# CSI 8 (rc) (rc) restore cursor position to saved value
# CSI H (hts) (hts) set tab stop
# CSI Q<n><string> define function key string
# (string must begin and end with delimiter char)
# CSI c (clear) clear screen
#
# The lack of any specification for attributes in SGR (among other things)
# makes this a wretchedly weak standard. The table above is literally
# everything iBSC2 has to say about terminal escape sequences; there is
# no further discussion of their meaning or how to set the parameters
# in these sequences at all.
#
######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
#
# The historical termcap file entries were written primarily in 4.4BSD termcap.
# The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
# with the extension names chosen for compatibility with the termcap names
# assigned in System V terminfo. There are some variant extension sets out
# there. We try to describe them here.
#
# XENIX extensions:
#
# The XENIX extensions include a set of function-key capabilities as follows:
#
# code XENIX variable name terminfo name name clashes?
# ---- ------------------- ------------- -----------------------
# CL key_char_left
# CR key_char_right
# CW key_change_window create_window
# EN key_end kend
# HM key_home khome
# HP ??
# LD key_delete_line kdl1
# LF key_linefeed label_off
# NU key_next_unlocked_cell
# PD key_page_down knp
# PL ??
# PN start_print mc5
# PR ??
# PS stop_print mc4
# PU key_page_up kpp pulse
# RC key_recalc remove_clock
# RF key_toggle_ref req_for_input
# RT key_return kent
# UP key_up_arrow kcuu1 parm_up_cursor
# WL key_word_left
# WR key_word_right
#
# The XENIX extensions also include the following character-set and highlight
# capabilities:
#
# XENIX terminfo function
# ----- -------- ------------------------------
# GS smacs start alternate character set
# GE rmacs end alternate character set
# GG :as:/:ae: glitch (analogous to :sg:/:ug:)
# bo blink begin blink (not used in /etc/termcap)
# be end blink (not used in /etc/termcap)
# bb blink glitch (not used in /etc/termcap)
# it dim begin dim (not used in /etc/termcap)
# ie end dim (not used in /etc/termcap)
# ig dim glitch (not used in /etc/termcap)
#
# Finally, XENIX also used the following forms-drawing capabilities:
#
# single double type ASCII approximation
# ------ ------ ------------- -------------------
# GV Gv vertical line |
# GH Gv horizontal line - _
# G1 G5 top right corner _ |
# G2 G6 top left corner |
# G3 G7 bottom left corner |_
# G4 G8 bottom right corner _|
# GD Gd down-tick character T
# GL Gl left-tick character -|
# GR Gr right-tick character |-
# GC Gc middle intersection -|-
# GU Gu up-tick character _|_
#
# These were invented to take advantage of the IBM PC ROM character set. One
# can compose an acsc string from the single-width characters as follows
# "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
# When translating a termcap file, ncurses tic will do this automatically.
# The double forms characters don't fit the SVr4 terminfo model.
#
# AT&T Extensions:
#
# The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
# nonstandard capabilities. Its signature is the KM capability, used to name
# some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
# set. Comments in the original, and a little cross-checking with other AT&T
# documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
# (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
# FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
# cursor invisible), and CV=:ve: (make cursor normal).
#
# HP Extensions
#
# The HP library (as of mid-1995, their term.h file version 70.1) appears to
# have the System V capabilities up to SVr1 level. After that, it supports
# two nonstandard caps meml and memu corresponding to the old termcap :ml:,
# :mu: capabilities. After that, it supports caps plab_norm, label_on,
# label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
# HP binary format incompatible with SVr4's.
#
# IBM Extensions
#
# There is a set of nonstandard terminfos used by IBM's AIX operating system.
# The AIX terminfo library diverged from SVr1 terminfo, and replaces all
# capabilities following prtr_non with the following special capabilties:
# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
# rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
# kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
# renamed (to kcbt and kslt). The places in the box[12] capabilities
# correspond to acsc chars, here is the mapping:
#
# box1[0] = ACS_ULCORNER
# box1[1] = ACS_HLINE
# box1[2] = ACS_URCORNER
# box1[3] = ACS_VLINE
# box1[4] = ACS_LRCORNER
# box1[5] = ACS_LLCORNER
# box1[6] = ACS_TTEE
# box1[7] = ACS_RTEE
# box1[8] = ACS_BTEE
# box1[9] = ACS_LTEE
# box1[10] = ACS_PLUS
#
# The box2 characters are the double-line versions of these forms graphics.
# The AIX binary terminfo format is incompatible with SVr4's.
#
# Iris console extensions:
#
# HS is half-intensity start; HE is half-intensity end
# CT is color terminal type (for Curses & rogue)
# CP is color change escape sequence
# CZ are color names (for Curses & rogue)
#
# The ncurses tic utility recognizes HS as an alias for mh <dim>.
#
# TC Extensions:
#
# There is a set of extended termcaps associated with something
# called the "Terminal Control" or TC package created by MainStream Systems,
# Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
# CF for civis and CO for cvvis. Finally, they define a boolean :ct:
# that flags color terminals.
#
######## CHANGE HISTORY
#
# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
# Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
# project.
#
# This file contains all the capability information present in John Kunze's
# last version of the termcap master file, except as noted in the change
# comments at end of file. Some information about very ancient obsolete
# capabilities has been moved to comments. Some all-numeric names of older
# terminals have been retired.
#
# I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
# capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
# used by BSD curses.
#
# The 9.1.0 version of this file was translated from my lightly-edited copy of
# 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
# the purpose. Unless the ncurses tic implementation and the Lisp code were
# making perfectly synchronized mistakes which I then failed to catch by
# eyeball, the translation was correct and perfectly information-preserving.
#
# Major version number bumps correspond to major version changes in ncurses.
#
# Here is a log of the changes since then:
#
# 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
# * First terminfo master translated from 8.3.
# 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
# * Replaced Wyse entries with updated entries supplied by vendor.
#
# 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
# * Added contact & status info from G. Clark Brown <clark@sssi.com>.
# 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
# * Better XENIX keycap translation. Describe TC termcaps.
# * Contact and history info supplied by Qume.
# 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
# * Raided the Shuford FTP site for recent termcaps/terminfos.
# * Added information on X3.64 and VT100 standard escape sequences.
# 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
# * Added a correct X11R6 xterm entry.
# * Fixed terminfo translations of padding.
# 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
# * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
# * Added u6/u7/u8/u9 capabilities.
# * Added PCVT entry.
# 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
# * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
# to use reverse-video standout so Emacs will look right.
# * Added el1 capability to ansi.
# * Added smacs/rmacs to ansi.sys.
#
# 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
# * New mt70 entry.
# * Added COPYRIGHTS AND OTHER DELUSIONS.
# * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
# smartvid & smarterm, ampex 175 & 219 & 232,
# env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
# ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
# screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
# adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
# * Replaced the Perkin-Elmer entries with vendor's official ones.
# * Restored the old minimal-ansi entry, luna needs it.
# * Fixed some incorrect ip and proportional-padding translations.
# 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
# * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
# * Make the xterm entry 65 lines again; create xterm25 and xterm24
# to force a particular height.
# * Added beehive4 and reorganized other Harris entries.
# 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
# * Merged in DEC's official entries for its terminals. The only old
# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
# * Replaced the translated BBN Bitgraph entries with purpose-built
# ones from AT&T's SVr3.
# * Replaced the AT&T entries with AT&T's official terminfos.
# * Added teleray 16, vc415, cops10.
# * Merged in many individual capabilities from SCO terminfo files.
# 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
# * Typo fixes.
# * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
# 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
# * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
# pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
# simterm, citoh and variants.
# * Replaced sol entry with sol1 and sol2.
# * Replaced Qume QVT and Freedom-series entries with purpose-built
# terminfo entries.
# * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
# and dg200 entries using caps from from SCO.
# * Added the usual set of function-key mappings to ANSI entry.
# * Corrected xterm's function-key capabilities.
# 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
# * Fix in xterm entry, cub and cud are not reliable under X11R6.
# 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
# * Fix in xterm entry, get the arrow keys right.
# * Change some \0 escapes to \200.
# 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
# * Added apple (Videx card), adm1a, oadm31.
# * Fixed malformed ampex csr.
# * Fixed act4, cyb110; they had old-style prefix padding left in.
# * Changed mandatory to advisory padding in many entries.
# * Replaced HP entries up to hpsub with purpose-built ones.
# * Blank rmir/smir/rmdc/smdc capabilities removed.
# * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
# 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
# * Replaced the Ann Arbor entries with SCO's, the init strings are
# more efficient (but the entries otherwise identical).
# * Added dg211 from Shuford archive.
# * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
# adm42-nl, pc52, gs6300, xerox820, uts30.
# * Pull SCO's padding into vi200 entry.
# * Improved capabilities for tvi4107 and other Televideo and Viewpoint
# entries merged in from SCO's descriptions.
# * Fixed old-style prefix padding on zen50, h1500.
# * Moved old superbee entry to superbee-xsb, pulled in new superbee
# entry from SCO's description.
# * Reorganized the special entries.
# * Added lm#0 to cbunix and virtual entries.
#
# 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
# * Restored cdc456tst.
# * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
# * Added megatek, beacon, microkit.
# * Freeze for ncurses-1.9 release.
# 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
# * Added historical data for TAB.
# * Comment fixes from David MacKenzie.
# * Added the new BSDI pc3 entry.
# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
# * A change in the tic -C logic now ensures that all entries in
# the termcap translation will fit in < 1024 bytes.
# * Added `bobcat' and `gator' HP consoles and the Nu machine entries
# from GNU termcap file. This merges in all their local information.
# 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
# * Changed tic -C logic to dump all capabilities used by GNU termcap.
# * Added warnings about entries with long translations (restoring
# all the GNU termcaps pushes a few over the edge).
# 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
# * Yet another tic change, and a couple of entry tweaks, to reduce the
# number of long (> 1024) termcap translations back to 0.
#
# 9.6.0 (Mon May 1 10:35:54 EDT 1995)
# * Added kf13-kf20 to Linux entry.
# * Regularize Prime terminal names.
# * Historical data on Synertek.
# * Freeze for ncurses-1.9.1.
# 9.6.1 (Sat May 6 02:00:52 EDT 1995):
# * Added true xterm-color entry, renamed djm's pseudo-color entry.
# * Eliminate whitespace in short name fields, this tanks some scripts.
# * Name field changes to shorten some long entries.
# * Termcap translation now automatically generates empty rmir/smir
# when ich1/ich is present (copes with an ancient vi bug).
# * Added `screen' entries from FSF's screen-3.6.2.
# * Added linux-nic and xterm-nic entries.
# 9.6.2 (Sat May 6 17:00:55 EDT 1995):
# * Change linux entry to use smacs=\E[11m and have an explicit acsc,
# eliminating some special-case code in ncurses.
#
# 9.7.0 (Tue May 9 18:03:12 EDT 1995):
# * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
# that captures everything unique from it.
# * Added reorder script generator.
# * Freeze for ncurses 1.9.2 release.
# 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
# * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
# * Added Olaf Siebert's corrections for adm12.
# * ansi-pc-color now includes the colors and pairs caps, so that
# entries which use it will inherit them automatically.
# * The linux entry can now recognize the center (keypad 5) key.
# * Removed some junk that found its way into Linux acsc.
#
# 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
# * Add 50% cut mark as a desperate hack to reduce tic's core usage.
# * xterm doesn't try to use application keypad mode any more.
# * Freeze for ncurses-1.9.3 release.
# 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
# * Added corrected sun entry from vendor.
# * Added csr capability to linux entry.
# * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
# * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
# * Some commented-out caps in long entries come back in, my code
# for computing string-table lengths had a bug in it.
# * pcansi series modified to fit comm-program reality better.
# 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
# * BSD/OS actually ships the ibmpc3 bold entry as its console.
# * Correct some bad aliases in the pcansi series
# * Added entry for QNX console.
# * Clean up duplicate long names for use with 4.4 library.
# * Change vt100 standout to be normal reverse vide, not bright reverse;
# this makes the Emacs status line look better.
# 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
# * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
# * Minor surgery, mostly on name strings, to shorten termcap version.
#
# 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
# * Added dec-vt100 for use with the EWAN emulator.
# * Added kmous to xterm for use with xterm's mouse-tracking facility.
# * Freeze for 1.9.5 alpha release.
# 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
# * Changed xterm lines to 24, the X11R6 default.
# 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
# * Added 7 newly discovered, undocumented acsc characters to linux
# entry (the pryz{|} characters).
# * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
# * Correct two typos in the xterm entries introduced in 9.9.1.
# * I finally figured out how to translate ko capabilities. Done.
# * Added tvi921 entries from Tim Theisen.
# * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
# * Removed mystery tec entry, it was neither interesting nor useful.
# * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
# vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
# trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
# by making them relative to use capabilities
# * Added cuf1=^L to tvi925 from deleted variant tvi925a.
# * fixed cup in adm22 entry and parametrized strings in vt320-k3.
# * added it#8 to entries that used to have :pt: -- tvi912, vi200,
# ampex80,
# * Translate all home=\E[;H capabilities to home=\E[H, they're
# equivalent.
# * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
# vt100 and ANSI-like terminals.
# 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
# * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
# does this now, too.
# * fviewpoint is gone, it duplicated screwpoint.
# * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
# ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
# versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
# The UW vi50 replaces the old one, which becomes vi50adm,
# * No more embedded commas in name fields.
#
# 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
# * XENIX forms characters in fos, trs16, scoansi become acsc strings,
# * Introduced klone+* entries for describing Intel-console behavior.
# * Linux kbs is default-mapped to delete for some brain-dead reason.
# * -nsl -> -ns. The -pp syntax is obsolete.
# * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
# * Make xterm entry do application-keypad mode again. I got complaints
# that it was messing up someone's 3270 emulator.
# * Added some longname fields in order to avoid warning messages from
# older tic implementations.
# * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
# it! (This gives us pi, greater than, less than, and a few more.)
# * Freeze for ncurses-1.9.6 release.
# 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
# * Add xon to a number of console entries, they're memory-mapped and
# don't need padding.
# * Correct the use dependencies in the ansi series.
# * Hand-translate more XENIX capabilities.
# * Added hpterm entry for HP's X terminal emulator.
# * Added aixterm entries.
# * Shortened four names so everything fits in 14 chars.
#
# 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
# * Added ibcs2 entry and info on iBCS2 standard.
# * Corrected hpa/vpa in linux entry. They still fail the worm test.
# * We can handle the HP meml/memu capability now.
# * Added smacs to klone entries, just as documentation.
# * Carrected ansi.sys and cit-500 entries.
# * Added z39, vt320-k311, v220c, and avatar entries.
# * Make pcansi use the ansi.sys invis capability.
# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
# tvi925, tvi950, dt80, ncr7900i, h19.
# * X3.64 has been withdrawn, change some references.
# * Removed function keys from ansi-m entry.
# * Corrected ansi.sys entry.
# * Freeze for ncurses-1.9.7 release.
# 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
# * Added rmam/smam capabilities to many entries based on init strings.
# * Added correct hpa/vpa to linux.
# * Reduced several entries relative to vt52.
# 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
# * Exiled some utterly unidentifiable custom and homebrew types to the
# UFO file; also, obsolete small-screen hardware; also, entries which
# look flat-out incorrect, garbled, or redundant. These include the
# following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
# tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
# apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
# fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
# yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
# vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
# trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
# att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
# tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
# c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
# regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
# vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
# vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
# * Corrected pcvt25h as suggested by Brian C. Grayson
# <bgrayson@pine.ece.utexas.edu>.
# 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
# * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
# * Added kent=\EOM to xterm entry.
#
# 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
# * Corrected gigi entry.
# * Restored cuf/cud1 to xterm, their apparent bugginess was due to
# bad hpa/vpa capabilities.
# * Corrected flash strings to have a uniform delay of .2 sec. No
# more speed-dependent NUL-padding!
# * terminfo capabilities in comments bracketed with <>.
# 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
# * Replaced pcvt with the 3.31 pcvt entries.
# * Freeze for 1.9.7a.
# 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
# * Added emu entry from the X11R6 contrib tape sources.
#
# 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
# * Improved iris-ansi and sun entries.
# * More flash string improvements.
# * Corrected wy160 & wy160 as suggested by Robert Dunn
# * Added dim to at386.
# * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
# he's ready to start using the termcap generated from this one.
# * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
# ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
# * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
# att610, att620, att630,
# * Changed hazeltine name prefix from h to hz.
# * Sent t500 to the UFI file.
# * I think we've sucked all the juice out of BSDI's termcap file now.
# * Freeze for ncurses 1.9.8 release
# 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
# * Unfreeze, linux kbs needed to be fixed.
# * Tim Theisen pinned down a bug in the DMD firmware.
# 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
# * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
# (The broken ones had been shadowed by sgr.)
# 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
# * Added documentation on ECMA-48 standard.
# * New Amiga entry.
# 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
# * More ECMA-48 stuff
# * Corrected typo in minix entry, added pc-minix.
# * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
# * Added rxvt entry.
# * Added 1.3.x color-change capabilities to linux entry.
# 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
# * Corrected rxvt entry khome/kend.
# * Corrected linux color change capabilities.
# * NeXT entries from Dave Wetzel.
# * Cleaned up if and rf file names (all in /usr/share now).
# * Changed linux op capability to avoid screwing up a background color
# pair set by setterm.
# 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
# * Added xterm-sun.
# 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
# * Added visa50.
#
# 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
# * Another sweep through the Shuford archive looking for new info.
# * Added dg100 alias to dg6053 based on a comp.terminals posting.
# * Added st52 from Per Persson.
# * Added eterm from the GNU Emacs 19.30 distribution.
# * Freeze for 1.9.9.
# 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
# * FreeBSD console entries from Andrew Chernov.
# * Removed duplicate Atari st52 name.
# 9.13.2 (Tue May 7 16:10:06 EDT 1996)
# * xterm doesn't actually have ACS_BLOCK.
# * Change klone+color setf/setb to simpler forms that can be
# translated into termcap.
# * Added xterm1.
# * Removed mechanically-generated junk capabilities from cons* entries.
# * Added color support to bsdos.
# 9.13.3 (Thu May 9 10:35:51 EDT 1996):
# * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
# * Created ecma+color, linux can use it. Also added ech to linux.
# * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
# * Add descriptions to FreeBSD console entries. Also shorten
# some aliases to <= 14 chars for portability.
# * Added x68k console
# * Added OTbs to several VT-series entries.
# 9.13.4 (Wed May 22 10:54:09 EDT 1996):
# * screen entry update for 3.7.1 from Michael Alan Dorman.
# 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
# * kterm correction due to Kenji Rikitake.
# * ACS correction in vt320-kll due to Phillippe De Muyter.
# 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
# * Sun console entry correction from J.T. Conklin.
# * Changed all DEC VT300 and up terminals to use VT300 tab set
# 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
# * Added smul to linux entry (we never noticed it was missing
# because of sgr!).
# * Added rmln to hp+labels (deduced from other HP entries).
# * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
# pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
# * Corrected vt220 acsc.
# * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
# this corresponds to reality and helps prevent some tic warnings.
# * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
# hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
# adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
# qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
# wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
# adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
# f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
# owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
# lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
# dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
# ifmr, v3220, wy100q, tandem653, ibmaed.
# * Added DWK terminal description.
# 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
# * Many entries now have highlights inherited from adm+sgr.
# * xterm entry now corresponds to XFree86 3.1.2E, with color.
# * xtitle and xtitle-twm enable access to the X status line.
# * Added linux-1.3.6 color palette caps in conventional format.
# * Added adm1178 terminal.
# * Move fos and apollo terminals to obsolete category.
# * Aha! The BRL terminals file told us what the Iris extensions mean.
# * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
# commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
# cit500, adm11.
# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
# * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
# aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
# * Corrected, from BRL termcap file: vi50.
# * Better rxvt entry & corrected xterm entries from Thomas Dickey.
# 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
# * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
# att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
# (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
# tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
# apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
# * Paired-attribute fixes to various terminals.
# * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
# * xterm entry corrections from Thomas Dickey.
# 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
# * Added t916 entry, translated from a termcap in SCO's support area.
# * New qnx entry from Michael Hunter.
# 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
# * Added hpex2 from Ville Sulko.
# * Fixed a bug that ran the qnx and pcvtXX together.
# 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
# * Added dtterm entry from Solaris CDE.
# 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
# * corrected pairs#8 typo in dtterm entry.
# * added tvi9065.
# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
# * updated xterm entry to cover 3.1.2E's new features.
# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
# * Added new minix entry
# * Removed aliases of the form ^[0-9]* for obsolete terminals.
# * Commented out linux-old, nobody's using pre-1.2 kernels now.
# 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
# * Added Prism entries and kt7ix.
# * Caution notes about EWAN and tabset files.
# * Changed /usr/lib/tabset -> /usr/share/tabset.
# * Added acsc/rmacs/smacs to vt52.
# 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
# * Merged in Thomas Dickey's reorganization of the xterm entries;
# added technical corrections to avoid warning messages.
# 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
# * Added rmso=\E[27m in Linux entry.
# * Added koi8-r support for Linux console.
# * Replace xterm entries with canonical ones from XFree86 3.2.
# 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
# * Added color_xterm from Jacob Mandelson
# 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
# * Back off the xterm entry to use r6 as a base.
# 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
# * Added dec-vt220 at Adrian Garside's request.
#
#-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
#
# 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
# * Minor corrections to xterm entries.
# * Replaced EWAN telnet entry.
# * Dropped the reorder script generator. It was a fossil.
# 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
# * Replaced minitel-2 entry.
# * Added MGR, ansi-nt.
# 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
# * Thorsten Lockert added termcap `bs' to a lot of types, working from
# the 4.4BSD Lite2 file.
#
# 10.1.1 (Sat May 3 21:41:27 EDT 1997):
# * Use setaf/setab consistently with SVr4.
# * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
# 10.1.2 (Sat May 24 21:10:57 EDT 1997)
# * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
# * add xterm-16color, for XFree86 3.3
# 10.1.3 (Sat May 31 12:21:05 EDT 1997)
# * correct typo in emu
# * correct typo in vt102-w (Robert Wuest)
# * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
# 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
# * remove ech capability from rxvt (it does the wrong thing)
# 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
# * remove spurious newlines from several entries (hp+color, wy50,
# wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
# gs6300)
# 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
# * correct rmso capability of wy50-mc
# 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
# * add cbt to xterm-xf86-v32
# * disentangle some entries from 'xterm', preferring xterm-r6 in case
# 'xterm' is derived from xterm-xf86-v32, which implements ech and
# other capabilities not in xterm-r6.
# * remove alternate character set from kterm entry.
# 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
# * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
# 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
# * add xterm-8bit entry.
# 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
# * repair several places where early version of tic replaced \, with \\\,
# * make acsc entries canonical form (sorted, uniq).
# * modify acsc entries for linux, linux-koi8
# * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
# * add color, mouse support to kterm.
# 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
# * correct wy120 smxon/tbc capabilities which were stuck together.
# 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
# * add entry for xterm-xf86-v39t
# 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
# * add u8,u9 to sun-il description
# 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
# * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
# version.
# * add hds200 description (Walter Skorski)
# * add EMX 0.9b descriptions
# * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
# * rename xhpterm back to hpterm.
# 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
# * change initc in linux-c-nc to use 0..1000 range.
# 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
# * remove hpa/vpa from rxvt, which implements them incorrectly.
# * add sgr0 for rxvt.
# * remove bogus smacs/rmacs from EMX descriptions.
# 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
# * revised entry for att7300
# 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
# * use \0 rather than \200.
# * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
# 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
# * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
# * rename xterm-xf86-v39t to xterm-xf86-v40
# * remove bold/underline from sun console entries since they're not
# implemented.
# 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
# * add beterm entry (Fred Fish)
# * add irix-color/xwsh entry.
# * turn ncv off for linux.
# 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
# * set ncv for FreeBSD console (treat colors with reverse specially).
# * remove sgr string from qnx based on report by Xiaodan Tang
# 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
# * remove spurious commas from descriptions
# * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
# 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
# apparently based on cp-866).
#
#-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
#
# 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
# * Replaced minitel-2 entry.
# * Added MGR, ansi-nt.
# * Minor corrections to xterm entries.
# * Replaced EWAN telnet entry.
# * Dropped the reorder script generator. It was a fossil.
# 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
# * Thorsten Lockert added termcap `bs' to a lot of types, working from
# the 4.4BSD Lite2 file.
# 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
# * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
# * Updated iris-ansi; corrected vt102-w.
# * Switch base xterm entry to 3.3 level.
# 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
# * Added basic4.
# * Removed rmir/smir from tv92B.
#
# 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
# * add hds200 description (Walter Skorski)
# * add beterm entry (Fred Fish)
# * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
# iris-color entries.
# * add emx entries.
# * Replaced unixpc entry with Benjamin Sittler's corrected version.
# * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
# versions.
# * remove sgr string from qnx based on report by Xiaodan Tang
# * Added u8/u9, removed rmul/smul from sun-il.
# * 4.2 tic displays \0 rather than \200.
# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
# apparently based on cp-866).
# * Merged in Pavel Roskin's acsc for linux-koi8
# * Corrected some erroneous \\'s to \.
# * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
# * II -> ii in pcvtXX, screen, xterm.
# * Removed \n chars following ANSI escapes in sgr & friends.
# * Updated Wyse entries.
# * h19 corrections from Tim Pierce.
# * Noted that the dm2500 has both ich and smir.
# * added pccons for the Alpha under OSF/1.
# * Added Sony NEWS workstation entries and cit101e-rv.
# * Reverted `amiga'; to Kent Polk's version, as I'm told
# the Verkuil entry messes up with Amiga Telnet.
# 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
# * Corrected attributions in 10.2.0 release notes.
# * Scanned the Shuford archive for new terminfos and information.
# * Removed sgr from qnx entry (Thomas Dickey).
# * Added entries for ICL and Kokusai Data Systems terminals.
# * Incorporated NCR terminfos from the Boundless Technology FTP site.
# * Incorporated att700 from the Boundless Technology FTP site.
# * Miscellaneous contact-address and Web-page updates.
#
#-(changelog-beginning-ncurses-4.2)---------------------------------------------
#
# 1998/5/9
# * add nxterm and xterm-color terminfo description (request by Cristian
# Gafton <gafton@redhat.com>).
# * modify rxvt terminfo description to clear alternate screen before
# switching back to normal screen, for compatibility with applications
# which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
# * modify linux terminfo description to reset color palette (reported
# by Telford Tendys <telford@eng.uts.edu.au>).
#
# 1998/7/4
# * merge changes from current XFree86 xterm terminfo descriptions.
#
# 1998/7/25
# * Added minitel1 entries from Alexander Montaron.
# * Added qnxt2 from Federico Bianchi.
# * Added arm100 terminfo entries from Dave Millen.
#
# 1998/8/6
# * Added ncsa telnet entries from Francesco Potorti
#
# 1998/8/15
# * modify ncsa telnet entry to reflect color, other capabilities based on
# examination of the source code - T.Dickey.
#
# 1998/8/22
# * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
#
# 1998/8/29
# * Added Francesco Potorti's tuned Wyse 99 entries.
# * dtterm enacs correction from Alexander V. Lukyanov.
# * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
# * correct a typo in icl6404 entry.
# * add xtermm and xtermc
#
# 1998/9/26
# * format most %'char' sequences to %{number}
# * adapt IBM AIX 3.2.5 terminfo - T.Dickey
# * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
#
# 1998/10/10
# * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
# * correct initialization string in xterm-r5, add misc other features
# to correspond with xterm patch 84 - TD
#
# 1998/12/19
# * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
# * add Mathew Vernon's mach console entries
# * corrections for ncsa function-keys (report by Larry Virden)
#
# 1998/12/19
# * change linux to use ncv#2, since underline does not work with color - TD
#
# 1999/1/9
# * add kbt to iris-ansi, document other shift/control functionkeys - TD
# * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
# application modes, change kent to use the correct keypad code - TD
#
# 1999/1/10
# * add entry for Tera Term - TD
#
# 1999/1/23
# * minor improvements for teraterm entry - TD
# * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
# and bsdos-bold to bsdos-pc (Jeffrey C Honig)
#
# 1999/2/20
# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
# xterm and ncsa entries by removing the unneeded ones. Note that
# some entries will return kend & khome versus kslt and kfnd, for
# PC-style keyboards versus strict vt220 compatiblity - TD
#
# 1999/3/13
# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
# tables - TD
# * add 'crt' entry - TD
# * correct typos in 'linux-c' entry - TD
#
# 1999/3/14
# * update entries for BSD/OS console to use klone+sgr and klone+color
# (Jeffrey C Honig)
#
# 1999/3/27
# * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
#
# 1999/4/10
# * add linux-lat, from RedHat patches to ncurses 4.2
#
# 1999/4/17
# * add complete set of default function-key definitions for scoansi - TD.
#
# 1999/7/3
# * add cnorm, cvvis for Linux 2.2 kernels
#
# 1999/7/24
# * add kmous to xterm-r5 -TD
# * correct entries xterm+sl and xterm+sl-twm, which were missing the
# parent "use" clause -TD
#
# 1999/7/31
# * corrected cnorm, added el1 in 'screen' description -TD
#
# 1999/8/14
# * add ms-vt100 -TD
#
# 1999/8/21
# * corrections to beterm entry -TD
#
# 1999/8/28
# * add cygwin entry -TD
#
# 1999/9/4
# * minor corrections for beterm entry -TD
#
# 1999/9/18
# * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
#
# 1999/9/25
# * add amiga-8bit entry
# * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
# rcons-color, based on
# ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
# * add alias for iris-ansi-net
#
# 1999/10/2
# * corrected scoansi entry's acsc, some function keys, add color -TD
#
# 1999/10/23
# * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
# * reorder ncsa entries to make ncsa-vt220 use the alternate function
# key mapping, leaving Potorti's entries more like he named them -TD
# * remove enter/exit am-mode from cygwin -TD
#
# 1999/10/30
# * correct typos in several entries (missing '[' from CSI):
# mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
# strings for avt-ns -TD
# * add 'dim' to ncv mask for linux (report by Klaus Weide).
#
# 1999/11/27
# * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
# * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
# * add xterm-88color and xterm-256color -TD
#
# 1999/12/4
# * add "obsolete" termcap strings -TD
# * add kvt and gnome entries -TD
#
# 1999/12/11
# * correct cup string for regent100 -TD
#
# 2000/1/1
# * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
# * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
# * change OTrs capabilities to rs2 -TD
# * add obsolete and extended capabilities to 'screen' -TD
#
# 2000/1/5
# * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
# with kf10 -TD
# * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
# and adding kcbt -TD
#
# 2000/1/12
# * remove incorrect khome/kend from xterm-xf86-v333, which was based on
# nonstandard resource settings -TD
#
# 2000/2/26
# * minor fixes for xterm-*, based on Debian #58530 -TD
#
# 2000/3/4
# * add several terminal types from esr's "11.0", as well as comments.
# bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
# vt220-8bit, vt220-old, wy85-8bit
#
# 2000/3/18
# * add several terminal types from esr's "11.0.1" (ansi-*).
# * update OTxx capabilities for changes on 2000/3/4.
# * revert part of vt220 change (request by Todd C Miller for OpenBSD)
#
# 2000/3/26
# * move screen's AX extension to ecma+color, modify several entries to
# use that, adjusting ncv as needed -TD
#
# 2000/4/8
# * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
# * correct spelling error in entry name: bq300-rv was given as bg300-rv
# in esr's version.
#
# 2000/4/15
# * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
# * correct color definition for ibm3164, make minor changes to other
# IBM terminal definitions based on recent terminfo descriptions -TD
#
# 2000/4/22
# * add mgterm, from NetBSD -TD
# * add alias sun-cgsix for sun-ss5 as per NetBSD
# * change cons25w to use rs2 for reset rather than rs1 -TD
# * add rc/sc to aixterm based on manpage -TD
#
# 2000/5/13
# * remove ncv from xterm-16color, xterm-256color
#
# 2000/6/10
# * add kmous capability to linux to use Joerg Schoen's gpm patch.
#
# 2000/7/1
# * add Eterm (Michael Jennings)
#
# 2000-07-18
# * add amiga-vnc entry.
#
# 2000-08-12
# * correct description of Top Gun Telnet.
# * add kterm-color
#
# 2000-08-26
# * add qansi* entries from QNX ftp site.
#
# 2000-09-16
# * add Matrix Orbital entries by Eric Z. Ayers).
# * add xterm-basic, xterm-sco entries, update related entries to XFree86
# 4.0.1c -TD
#
# 2000-09-17
# * add S0, E0 extensions to screen's entry -TD
#
# 2000-09-23
# * several corrections based on tic's new parameter-checking code -TD
# * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
# bracketing sequences that reset video attributes (\E8 would restore
# them) -TD
#
# 2000-11-11
# * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
#
# 2000-12-16
# * improved scoansi, based on SCO man-page, and testing console,
# scoterm with tack -TD
#
# 2001-01-27
# * modify kterm to use acsc via SCS controls.
#
# 2001-02-10
# * screen 3.9.8 allows xterm mouse controls to pass-through
#
# 2001-03-11
# * remove spurious "%|" from some xterm entries.
#
# 2001-03-31
# * modify 'screen' khome/kend to match screen 3.09.08
# * add examples of 'screen' customization (screen.xterm-xfree86,
# screen.xterm-r6, screen.teraterm) -TD
#
# 2001-04-14
# * correct definitions of shifted editing keys for xterm-xfree86 -TD
# * add "Apple_Terminal" entries -Benjamin Sittler
# * remove time-delays from "Apple_Terminal" entries -TD
# * make sgr entries time-delays consistent with individual caps -TD
#
# 2001-05-05
# * corrected/updated screen.xterm-xfree86
#
# 2001-05-19
# * ELKS descriptions, from Federico Bianchi
# * add u6 (CSR) to Eterm (Michael Jennings).
#
# 2001-07-21
# * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
# tic which handles names no longer than 14 characters. Add
# corresponding descriptions for the Darwin PowerPC console named
# "xnuppc" -Benjamin Sittler
#
# 2001-09-01
# * change kbs in mach entries to ^? (Marcus Brinkmann).
#
# 2001-11-17
# * add "putty" entry -TD
# * updated "Apple_Terminal" entries -Benjamin Sittler
#
# 2001-11-24
# * add ms-vt100-color entry -TD
# * add "konsole" entries -TD
#
# 2001-12-08
# * update gnome entry to Redhat 7.2 -TD
#
# 2002-05-25
# * add kf13-kf48 strings to cons25w -TD
# * add pcvt25-color entry -TD
# * changed a few /usr/lib/tabset -> /usr/share/tabset.
# * improve some features of scoansi entry based on SCO's version -TD
# * add scoansi-new entry corresponding to OpenServer 5.0.6
#
# 2002-06-15
# * add kcbt to screen entry -TD
#
# 2002-06-22
# * add rxvt-16color, ibm+16color, mvterm entries -TD
#
# 2002-09-28
# * split out linux-basic entry, making linux-c inherit from that, and
# in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
# the history of this console type -TD
# * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
# r/g/b parameters of initc are in the range 0 to 1000 -TD
#
# 2002-10-05
# * minor fix for scale-factor of linux-c and linux-c-nc -TD
#
# 2002-11-09
# * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
# in the latter -TD
#
# 2002-11-16
# * add entries for mterm (mterm, mterm-ansi, decansi) -TD
# * ncr260wy350pp has only 16 color pairs -TD
# * add sun-type4 from NetBSD -TD
# * update xterm-xfree86 to current (patch 170) -TD
# * add screen-bce, screen-s entries -TD
# * add xterm-1002, xterm-1003 entries -TD
#
# 2003-01-11
# * update homepage for Top Gun Telnet/SSH
#
# 2003-01-25
# * reduce duplication in emx entries, added emx-base -TD
#
# 2003-05-24
# * corrected acs for screen.teraterm -TD
# * add tkterm entry -TD
#
# 2003-07-15
# * cygwin changes from Charles Wilson:
# misc/terminfo.src (nxterm|xterm-color): make xterm-color
# primary instead of nxterm, to match XFree86's xterm.terminfo
# usage and to prevent circular links.
# (rxvt): add additional codes from rxvt.org.
# (rxvt-color): new alias
# (rxvt-xpm): new alias
# (rxvt-cygwin): like rxvt, but with special acsc codes.
# (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
# with a "native" MSWin GUI. Each takes different acsc codes,
# which are both different from the "normal" rxvt's acsc.
# (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
# (cygwinDBG): ditto.
#
# 2003-09-27
# * update gnome terminal entries -TD
#
# 2003-10-04
# * add entries for djgpp 2.03 and 2.04 -TD
#
# 2003-10-25
# * add alias for vtnt -TD
# * update xterm-xfree86 for XFree86 4.4 -TD
#
# 2003-11-22
# * add linux-vt (Andrey V Lukyanov)
#
# 2003-12-20
# * add screen.linux -TD
#
# 2004-01-10
# * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
#
# 2004-01-17
# * add OpenNT/Interix/SFU entries (Federico Bianchi)
# * add vt100+ and vt-utf8 entries -TD
# * add uwin entry -TD
#
# 2004-03-27
# * add sgr strings to several common entries lacking them, e.g.,
# screen, to make the entries more portable -TD
# * remove cvvis from rxvt entry, since it is the same as cnorm -TD
# * similar fixups for cvvis/cnorm various entries -TD
#
# 2004-05-22
# * remove 'ncv' from xterm-256color (patch 188) -TD
#
# 2004-06-26
# * add mlterm -TD
# * add xterm-xf86-v44 -TD
# * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
# on G1 being used via an ISO-2022 escape sequence (report by
# Juliusz Chroboczek) -TD
# * add 'hurd' entry -TD
#
# 2004-07-03
# * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
# xterm-basic -TD
# * align with xterm #192's use of xterm-new -TD
# * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
# * make xterm-new the default "xterm" -TD
#
# 2004-07-10
# * minor fixes for emu -TD
# * add emu-220
# * add rmam/smam to linux (Trevor Van Bremen)
# * change wyse acsc strings to use 'i' map rather than 'I' -TD
# * fixes for avatar0 -TD
# * fixes for vp3a+ -TD
#
# 2004-07-17
# * add xterm-pc-fkeys -TD
# * review/update gnome and gnome-rh90 entries (prompted by
# Redhat Bugzilla #122815) -TD
# * review/update konsole entries -TD
# * add sgr, correct sgr0 for kterm and mlterm -TD
# * correct tsl string in kterm -TD
#
# 2004-07-24
# * make ncsa-m rmacs/smacs consistent with sgr -TD
# * add sgr, rc/sc and ech to syscons entries -TD
# * add function-keys to decansi -TD
# * add sgr to mterm-ansi -TD
# * add sgr, civis, cnorm to emu -TD
# * correct/simplify cup in addrinfo -TD
# * corrections for gnome and konsole entries
# (Redhat Bugzilla #122815) -Hans de Goede
# * modify DEC entries (vt220, etc), to add sgr string, and to use
# ISO-2022 strings for rmacs/smacs -TD
#
# 2004-07-31
# * rename xterm-pc-fkeys to xterm+pcfkeys -TD
#
# 2004-08-07
# * improved putty entry -Robert de Bath
#
# 2004-08-14
# * remove dch/dch1 from rxvt because they are implemented inconsistently
# with the common usage of bce/ech -TD
# * remove khome from vt220 (vt220's have no home key) -TD
# * add rxvt+pcfkeys -TD
#
# 2004-08-21
# * modify several entries to ensure xterm mouse and cursor visibility
# are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
# Eterm, screen. (The xterm entries are left alone - old ones for
# compatibility, and the new ones do not require this change) -TD
#
# 2004-08-28
# * add morphos entry -Pavel Fedin
# * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
# * corrected \E[5?l to \E[?5l in vt320 entries -TD
#
# 2004-11-20
# * update wsvt25 entry -TD
#
# 2005-01-29
# * update pairs for xterm-88color and xterm-256color to reflect the
# ncurses extended-color support -TD
#
# 2005-02-26
# * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
# * add aixterm-16color to demonstrate 16-color capability -TD
#
# 2005-04-23
# * add media-copy to vt100 -TD
# * corrected acsc string for vt52 -TD
#
# 2005-04-30
# * add kUP, kDN (user-defined shifted up/down arrow) definitions for
# xterm-new -TD
# * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
#
# 2005-05-07
# * re-corrected acsc string for vt52 -TD
#
# 2005-05-28
# * corrected sun-il sgr string which referred to bold and underline -TD
# * add sun-color entry -TD
#
# 2005-07-23
# * modify sgr0 in several entries to reset alternate-charset as in the
# sgr string -TD
# * modify sgr string of prism9 to better match the individual
# attributes -TD
#
# 2005-10-15
# * correct order of use= in rxvt-basic -TD
#
# 2005-10-26
# * use kind/kri as shifted up/down cursor keys for xterm-new -TD
#
# 2005-11-12
# * other minor fixes to cygwin based on tack -TD
# * correct smacs in cygwin (report by Baurzhan Ismagulov).
#
# 2006-02-18
# * add nsterm-16color entry -TD
# * remove ncv flag from xterm-16color -TD
# * remove setf/setb from xterm-256color to match xterm #209 -TD
# * update mlterm entry to 2.9.2 -TD
#
# 2006-02-25
# * fixes to make nsterm-16color match report
# by Christian Ebert -Alain Bench
#
# 2006-04-22
# * add xterm+256color building block -TD
# * add gnome-256color, putty-256color, rxvt-256color -TD
#
# 2006-05-06
# * add hpterm-color -TD
#
# 2006-06-24
# * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
# * add gnome-fc5 (prompted by GenToo #122566) -TD
# * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
# * improve xterm-256color by combining the ibm+16color setaf/setab
# strings with SGR 48. The setf/setb strings also are cancelled here
# rather than omitted so derived entries will cancel those also -Alain
# Bench
#
# 2006-07-01
# * add some notes regarding copyright to terminfo.src -TD
# * use rxvt+pcfkeys in Eterm -TD
# * remove km and flash from gnome, Eterm and rxvt since they do not work
# as one would expect (km sends ESC rather than setting the 8th bit
# of the key) -TD
# * add/use ansi+enq, vt100+enq and vt102+enq -TD
# * add konsole-solaris -TD
#
# 2006-07-22
# * update xterm-sun and xterm-sco entries to match xterm #216 -TD
# * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
# * modify xterm-24 to inherit from "xterm" -TD
# * add xiterm entry -TD
# * add putty-vt100 entry -TD
# * corrected spelling of Michael A Dorman's name, prompted by
# http://www.advogato.org/person/mdorman/diary.html -TD
#
# 2006-08-05
# * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
# * update xterm+pcfkeys to match xterm #216 -TD
#
# 2006-08-17
# * make descriptions of xterm entries consistent with its terminfo -TD
#
# 2006-08-26
# * add xfce, mgt -TD
#
# 2006-09-02
# * correct acsc string in kterm -TD
#
# 2006-09-09
# * add kon entry -TD
# * remove invis from linux and related entries, add klone+sgr8 for those
# that implement the feature (or have not been shown to lack it) -TD
#
# 2006-09-23
# * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
# * minor improvements to rxvt+pcfkeys -TD
#
# 2006-09-30
# * fix a few typos in if/then/else expressions -TD
#
# 2006-10-07
# * add several GNU Screen variations with 16- and 256-colors, and
# status line (Alain Bench).
#
# 2007-03-03
# * add Newbury Data entries (Jean-Charles Billaud).
#
# 2007-06-10
# * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
#
# 2007-07-14
# * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
# * add konsole-256color entry -TD
#
# 2007-08-18
# * add 9term entry (request by Juhapekka Tolvanen) -TD
#
# 2007-10-13
# * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
# * add shift-control- and control-modified keys for rxvt editing
# keypad -TD
# * update mlterm entry to 2.9.3 -TD
# * add mlterm+pcfkeys -TD
#
# 2007-10-20
# * move kLFT, kRIT, kind and kri capabilities from xterm-new to
# xterm+pcc0, etc., to make the corresponding building blocks reflect
# xterm's capabilities -TD
# * add mrxvt entry -TD
# * add xterm+r6f2, use in mlterm and mrxvt entries -TD
#
# 2007-11-03
# * correct acsc strings for h19 and z100 (Benjamin Sittler)
#
# 2007-11-11
# * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
# xterm starting with patch #216 -TD
# * make legacy xterm entries such as xterm-24 inherit from xterm-old,
# to match xterm #230 -TD
# * extend xterm+pccX entries to match xterm #230 -TD
# * add xterm+app, xterm+noapp, from xterm #230 -TD
# * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
#
# 2008-04-19
# * add screen.rxvt -TD
#
# 2008-04-28
# * add screen+fkeys (prompted by Debian # 478094) -TD
#
# 2008-06-28
# * add screen.mlterm -TD
# * improve mlterm and mlterm+pcfkeys -TD
#
# 2008-08-23
# * add Eterm-256color, Eterm-88color -TD
# * add rxvt-88color -TD
#
# 2008-10-12
# * add teraterm4.59 entry, use that as primary teraterm entry, rename
# original to teraterm2.3 -TD
# * update "gnome" to 2.22.3 -TD
# * update "konsole" to 1.6.6 -TD
# * add "aterm" -TD
# * add "linux2.6.26" -TD
#
# The following sets edit modes for GNU EMACS.
# Local Variables:
# fill-prefix:"\t"
# fill-column:75
# comment-column:0
# comment-start-skip:"^#+"
# comment-start:"# "
# compile-command:"tic -c terminfo.master"
# End:
######## SHANTIH! SHANTIH! SHANTIH!