##############################################################################
# Copyright (c) 1998-2003,2006 Free Software Foundation, Inc. #
# #
# Permission is hereby granted, free of charge, to any person obtaining a #
# copy of this software and associated documentation files (the "Software"), #
# to deal in the Software without restriction, including without limitation #
# the rights to use, copy, modify, merge, publish, distribute, distribute #
# with modifications, sublicense, and/or sell copies of the Software, and to #
# permit persons to whom the Software is furnished to do so, subject to the #
# following conditions: #
# #
# The above copyright notice and this permission notice shall be included in #
# all copies or substantial portions of the Software. #
# #
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR #
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, #
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL #
# THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER #
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING #
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER #
# DEALINGS IN THE SOFTWARE. #
# #
# Except as contained in this notice, the name(s) of the above copyright #
# holders shall not be used in advertising or otherwise to promote the sale, #
# use or other dealings in this Software without prior written #
# authorization. #
##############################################################################
# $Id: emx.src,v 1.9 2006/04/22 21:46:17 tom Exp $
# This is a reformatted copy of the terminfo source for OS/2 EMX from
# Juan Jose Garcia Ripoll <worm@arrakis.es>.
# http://www.arrakis.es/~worm/
#----------------------------------------------------------------------------
#
# This section describes terminal classes and maker brands that are still
# quite common.
#
#### Specials
#
# Special "terminals". These are used to label tty lines when you don't
# know what kind of terminal is on it. The characteristics of an unknown
# terminal are the lowest common denominator - they look about like a ti 700.
#
dumb|80-column dumb tty,
am,
cols#80,
bel=^G,
cr=^M,
cud1=^J,
ind=^J,
unknown|unknown terminal type,
gn,
use=dumb,
lpr|printer|line printer,
hc,
os,
cols#132,
lines#66,
bel=^G,
cr=^M,
cub1=^H,
cud1=^J,
ff=^L,
ind=^J,
glasstty|classic glass tty interpreting ASCII control characters,
am,
cols#80,
bel=^G,
clear=^L,
cr=^M,
cub1=^H,
cud1=^J,
ht=^I,
kbs=^H,
kcub1=^H,
kcud1=^J,
nel=^M^J,
#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
#
# See the end-of-file comment for more on these.
#
# The IBM PC alternate character set. Plug this into any Intel console entry.
# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
# ROM graphics for control characters such as the diamond, up- and down-arrow.
# This works with the System V, Linux, and BSDI consoles. It's a safe bet this
# will work with any Intel console, they all seem to have inherited \E[11m
# from the ANSI.SYS de-facto standard.
klone+acs|alternate character set for ansi.sys displays,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
rmacs=\E[10m,
smacs=\E[11m,
# Highlight controls corresponding to the ANSI.SYS standard. Most
# console drivers for Intel boxes obey these. Makes the same assumption
# about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
klone+sgr|attribute control for ansi.sys displays,
blink=\E[5m,
bold=\E[1m,
invis=\E[8m,
rev=\E[7m,
rmacs=\E[10m,
rmpch=\E[10m,
rmso=\E[m,
rmul=\E[m,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
sgr0=\E[0;10m,
smacs=\E[11m,
smpch=\E[11m,
smso=\E[7m,
smul=\E[4m,
use=klone+acs,
# Highlight controls corresponding to the ANSI.SYS standard. *All*
# console drivers for Intel boxes obey these. Does not assume \E[11m will
# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
# diamond and arrow characters under curses.
klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
blink=\E[5m,
bold=\E[1m,
invis=\E[8m,
rev=\E[7m,
rmacs=\E[10m,
rmso=\E[m,
rmul=\E[m,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
sgr0=\E[0;10m,
smacs=\E[12m,
smso=\E[7m,
smul=\E[4m,
use=klone+acs,
# ANSI.SYS color control.
# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
klone+color|color control for ansi.sys and ISO6429-compatible displays,
colors#8,
ncv#3,
pairs#64,
op=\E[37;40m,
setab=\E[4%p1%dm,
setaf=\E[3%p1%dm,
# This is better than klone+color, it doesn't assume white-on-black as the
# default color pair, but many `ANSI' terminals don't grok the <op> cap.
ecma+color|color control for ECMA-48-compatible terminals,
AX,
colors#8,
ncv#3,
pairs#64,
op=\E[39;49m,
setab=\E[4%p1%dm,
setaf=\E[3%p1%dm,
#### ANSI/ECMA-48 terminals and terminal emulators
#
# See near the end of this file for details on ANSI conformance.
# Don't mess with these entries! Lots of other entries depend on them!
#
# This section lists entries in a least-capable to most-capable order.
# if you're in doubt about what `ANSI' matches yours, try them in that
# order and back off from the first that breaks.
ansi-mini|any ansi terminal with pessimistic assumptions,
am,
cols#80,
it#8,
lines#24,
clear=\E[H\E[2J$<50>,
cub1=\E[D,
cud1=\E[B,
cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A,
el=\E[K,
home=\E[H,
ht=^I,
#
# ANSI.SYS entries
#
# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
# documentation (except for the keyboard key reassignment feature, which
# doen't fit the <pfkey> model well). The klone+acs sequences were valid
# though undocumented. The <pfkey> capability is untested but should work for
# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
am,
mir,
msgr,
xon,
cols#80,
lines#25,
clear=\E[2J,
cub1=^H,
cud1=\E[B,
cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A,
el=\E[k,
home=\E[H,
is2=\E[m\E[?7h,
kcub1=^H,
kcud1=^J,
kcuf1=^L,
kcuu1=^K,
khome=^^,
pfkey=\E[0;%p1%{58}%+%d;%p2"%s",
rc=\E[u,
rmam=\E[?7l,
sc=\E[s,
smam=\E[?7h,
u6=\E[%i%d;%dR,
u7=\E[6n,
use=klone+color,
use=klone+acs,
use=klone+sgr,
ansi.sys|ANSI.SYS 3.1 and later versions,
el=\E[K,
use=ansi.sys-old,
### EMX termcap.dat compatibility modes
#
# Keypad: Home=\0G Up=\0H PrPag=\0I
# ka1,kh kcuu1 kpp,ka3
#
# Left=\0K 5=\0L Right=\0M
# kcub1 kb2 kcuf1
#
# End=\0O Down=\0P NxPag=\0Q
# kc1,kend kcud1 kc3,knp
#
# Ins=\0R Del=\0S
# kich1 kdch1
#
# On keyboard with 12 function keys,
# shifted f-keys: F13-F24
# control f-keys: F25-F36
# alt f-keys: F37-F48
# The shift/control/alt keys do not modify each other, but alt overrides both,
# and control overrides shift.
#
# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
# no_color_video to inform the application that standout(1), underline(2)
# reverse(4) and invisible(64) don't work with color.
emx-base|DOS special keys,
bce,
bw,
it#8,
ncv#71,
bel=^G,
ka1=\0G,
ka3=\0I,
kb2=\0L,
kbs=^H,
kc1=\0O,
kc3=\0Q,
kcbt=\0^O,
kcub1=\0K,
kcud1=\0P,
kcuf1=\0M,
kcuu1=\0H,
kdch1=\0S,
kend=\0O,
kf1=\0;,
kf10=\0D,
kf11=\0\205,
kf12=\0\206,
kf13=\0T,
kf14=\0U,
kf15=\0V,
kf16=\0W,
kf17=\0X,
kf18=\0Y,
kf19=\0Z,
kf2=\0<,
kf20=\0[,
kf21=\0\\,
kf22=\0],
kf23=\0\207,
kf24=\0\210,
kf25=\0\^,
kf26=\0_,
kf27=\0`,
kf28=\0a,
kf29=\0b,
kf3=\0=,
kf30=\0c,
kf31=\0d,
kf32=\0e,
kf33=\0f,
kf34=\0g,
kf35=\0\211,
kf36=\0\212,
kf37=\0h,
kf38=\0i,
kf39=\0j,
kf4=\0>,
kf40=\0k,
kf41=\0l,
kf42=\0m,
kf43=\0n,
kf44=\0o,
kf45=\0p,
kf46=\0q,
kf47=\0\213,
kf48=\0\214,
kf5=\0?,
kf6=\0@,
kf7=\0A,
kf8=\0B,
kf9=\0C,
khome=\0G,
kich1=\0R,
knp=\0Q,
kpp=\0I,
use=ansi.sys,
#
# To properly translate termcap.dat -> terminfo.src remember these
# equivalences:
# ti <-> smcup string to start programs using cup(termcap)
# te <-> rmcup string to end programs using cup
# so <-> smso begin standout mode
# se <-> rmso exit standout mode
# us <-> smul begin underline mode
# ue <-> rmul exit underline mode
# mb <-> blink turn on blinking
# md <-> bold turn on extra bright (bold) mode
# mr <-> rev turn on reverse video mode
# me <-> sgr0 turn off all atributes
#
# On my terminal, \E[4m looks dim.
ansi-emx|ANSI.SYS color,
blink=\E[5m,
bold=\E[1m,
kmous=\E[M,
rev=\E[7m,
rmcup=\E[0m,
rmso=\E[0m,
rmul@,
sgr0=\E[0m,
smcup=\E[0;37;40m,
smso=\E[7m,
smul@,
use=emx-base,
window|ANSI.SYS window,
blink=\E[5m,
bold=\E[1;37;47m,
rev=\E[1;37;47m,
rmcup=\E[0m,
rmso=\E[0;37;40m,
rmul=\E[0;37;40m,
sgr0=\E[0;37;40m,
smcup=\E[0;37;40m,
smso=\E[1;37;47m,
smul=\E[1;31;47m,
use=emx-base,
os2|OS/2-emx ANSI.SYS,
cub=\E[%p1%dD,
cub1=\E[D,
cud=\E[%p1%dB,
cud1=\E[B,
cuf=\E[%p1%dC,
cuf1=\E[C,
cuu=\E[%p1%dA,
cuu1=\E[A,
rc=\E[u,
sc=\E[s,
use=ansi-emx,
use=mono,
mono|ANSI.SYS mono,
blink=\E[5m,
bold=\E[1m,
rev=\E[7m,
rmcup=\E[0m,
rmso=\E[m,
rmul=\E[m,
sgr0=\E[m,
smcup=\E[0m,
smso=\E[1m,
smul=\E[4m,
use=emx-base,
# same as mono, but use reverse video for standout (nice for Emacs)
rmono|ANSI.SYS reverse mono,
smso=\E[7m,
use=mono,
# same as mono, but use a readable color for underlining
mono2|ANSI.SYS mono2,
rmul=\E[0m,
smul=\E[1;31;40m,
use=mono,
# nice colors for Emacs (white on blue, mode line white on cyan)
ansi-color-2-emx|ANSI.SYS color 2,
rmcup=\E[0m,
rmso=\E[0;37;44m,
rmul=\E[0m,
sgr0=\E[0;37;44m,
smcup=\E[0;37;44m,
smso=\E[1;37;46m,
smul=\E[1;31;40m,
use=ansi-emx,
# nice colors for Emacs (white on black, mode line black on cyan)
ansi-color-3-emx|ANSI.SYS color 3,
rmcup=\E[0m,
rmso=\E[0m,
rmul=\E[0m,
sgr0=\E[0m,
smcup=\E[0m,
smso=\E[30;46m,
smul=\E[1;31;40m,
use=ansi-emx,
#### X terminal emulators
#
# X10/6.6 11/7/86, minus alternate screen, plus (csr)
# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
# as these seem not to work -- esr)
x10term|vs100-x10|xterm terminal emulator (X10 window system),
am,
km,
mir,
msgr,
xenl,
xon,
cols#80,
it#8,
lines#65,
bold=\E[1m,
clear=\E[H\E[2J,
csr=\E[%i%p1%d;%p2%dr,
cub1=^H,
cud1=^J,
cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A,
dch=\E[%p1%dP,
dch1=\E[P,
dl=\E[%p1%dM,
dl1=\E[M,
ed=\E[J,
el=\E[K,
home=\E[H,
ht=^I,
il=\E[%p1%dL,
il1=\E[L,
ind=^J,
is2=\E\E[m\E[?7h\E[?1;4l,
kbs=^H,
kcub1=\EOD,
kcud1=\EOB,
kcuf1=\EOC,
kcuu1=\EOA,
kf1=\EOP,
kf2=\EOQ,
kf3=\EOR,
kf4=\EOS,
rev=\E[7m,
ri=\EM,
rmam=\E[?7l,
rmir=\E[4l,
rmkx=\E[?1l\E>,
rmso=\E[m,
rmul=\E[m,
sgr0=\E[m,
smam=\E[?7h,
smir=\E[4h,
smkx=\E[?1h\E=,
smso=\E[7m,
smul=\E[4m,
# X11R6 xterm. This is known good for the XFree86 version under Linux.
# It is *way* more featureful than the stock X consortium entry (has acsc,
# for starters). The <kmous> key is actually the \E[M prefix returned by
# xterm's internal mouse-tracking facility; ncurses will interpret the
# following three bytes of mouse status information.
# From: Eric S. Raymond <esr@snark.thyrsus.com> 14 Dec 1995
xterm-r6|xterm terminal emulator (X11R6 Window System),
am,
km,
mir,
msgr,
xenl,
xon,
cols#80,
it#8,
lines#65,
acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G,
bold=\E[1m,
clear=\E[H\E[2J,
cr=^M,
csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD,
cub1=^H,
cud=\E[%p1%dB,
cud1=^J,
cuf=\E[%p1%dC,
cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA,
cuu1=\E[A,
dch=\E[%p1%dP,
dch1=\E[P,
dl=\E[%p1%dM,
dl1=\E[M,
ed=\E[J,
el=\E[K,
enacs=\E(B\E)0,
home=\E[H,
ht=^I,
ich=\E[%p1%d@,
ich1=\E[@,
il=\E[%p1%dL,
il1=\E[L,
ind=^J,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
kbs=^H,
kcub1=\EOD,
kcud1=\EOB,
kcuf1=\EOC,
kcuu1=\EOA,
kend=\EOe,
kent=\EOM,
kf1=\E[11~,
kf10=\E[21~,
kf11=\E[23~,
kf12=\E[24~,
kf13=\E[25~,
kf14=\E[26~,
kf15=\E[28~,
kf16=\E[29~,
kf17=\E[31~,
kf18=\E[32~,
kf19=\E[33~,
kf2=\E[12~,
kf20=\E[34~,
kf3=\E[13~,
kf4=\E[14~,
kf5=\E[15~,
kf6=\E[17~,
kf7=\E[18~,
kf8=\E[19~,
kf9=\E[20~,
kfnd=\E[1~,
khome=\EO\0,
kich1=\E[2~,
kmous=\E[M,
knp=\E[6~,
kpp=\E[5~,
rc=\E8,
rev=\E[7m,
ri=\EM,
rmacs=^O,
rmam=\E[?7l,
rmcup=\E[2J\E[?47l\E8,
rmir=\E[4l,
rmkx=\E[?1l\E>,
rmso=\E[m,
rmul=\E[m,
rs1=^O,
rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
sc=\E7,
sgr0=\E[m,
smacs=^N,
smam=\E[?7h,
smcup=\E7\E[?47h,
smir=\E[4h,
smkx=\E[?1h\E=,
smso=\E[7m,
smul=\E[4m,
tbc=\E[3k,
u6=\E[%i%d;%dR,
u7=\E[6n,
u8=\E[?1;2c,
u9=\E[c,
xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
smso=\E[1m,
use=xterm,
xterms|vs100s|xterm terminal emulator (small screen 24x80),
cols#80,
lines#24,
use=xterm,
# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
kterm|kterm kanji terminal emulator (X window system),
eslok,
hs,
csr=\E[%i%p1%d;%p2%dr,
dsl=\E[?H,
fsl=\E[?F,
rc=\E8,
sc=\E7,
tsl=\E[?E\E[?%i%dT,
use=xterm,
use=ecma+color,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
ich@,
ich1@,
use=xterm,
# Should work with the color xterm on the X11R6 contrib tape.
# Assumes the xterm attribute default is black on white.
# From: Eric S. Raymond <esr@snark.thyrsus.com> March 4 1996
xterm-color|xterm with color support,
op=\E[30;47m,
use=xterm,
use=klone+color,
# From: Thomas Dickey <dickey@clark.net> 13 Dec 1995
rxvt|rxvt terminal emulator,
kend=\EOw,
khome=\E[H,
kmous@,
use=xterm,
use=klone+color,
# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
# Here's a termcap entry I've been using for xterm_color, which comes
# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
# color stuff, I also have a status line defined as the window manager
# title bar. [I have translated it to terminfo -- ESR]
xterm-pcolor|xterm with color used for highlights and status line,
hs,
wsl#40,
bold=\E[1m\E[43m,
dsl=\E]0;\007,
fsl=^G,
rev=\E[7m\E[34m,
smso=\E[7m\E[31m,
smul=\E[4m\E[42m,
tsl=\E]0;,
use=xterm,
# HP ships this, except for the pb#9600 which was merged in from BSD termcap.
hpterm|X-hpterm|hp X11 terminal emulator,
am,
da,
db,
mir,
xhp,
cols#80,
lh#2,
lines#24,
lm#0,
lw#8,
nlab#8,
pb#9600,
xmc#0,
bel=^G,
bold=\E&dB,
cbt=\Ei,
clear=\E&a0y0C\EJ,
cr=^M,
cub1=^H,
cud1=\EB,
cuf1=\EC,
cup=\E&a%p1%dy%p2%dC,
cuu1=\EA,
dch1=\EP,
dim=\E&dH,
dl1=\EM,
ed=\EJ$<1>,
el=\EK,
hpa=\E&a%p1%dC,
ht=^I,
hts=\E1,
il1=\EL,
ind=^J,
kbs=^H,
kclr=\EJ,
kctab=\E2,
kcub1=\ED,
kcud1=\EB,
kcuf1=\EC,
kcuu1=\EA,
kdch1=\EP,
kdl1=\EM,
ked=\EJ,
kel=\EK,
kf1=\Ep,
kf2=\Eq,
kf3=\Er,
kf4=\Es,
kf5=\Et,
kf6=\Eu,
kf7=\Ev,
kf8=\Ew,
khome=\Eh,
khts=\E1,
kich1=\EQ,
kil1=\EL,
kind=\ES,
kll=\EF,
knp=\EU,
kpp=\EV,
kri=\ET,
krmir=\ER,
ktbc=\E3,
meml=\El,
memu=\Em,
pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
pln=\E&f%p1%dk%p2%l%dd0L%p2%s,
rev=\E&dB,
ri=\ET,
rmacs=^O,
rmir=\ER,
rmkx=\E&s0A,
rmln=\E&j@,
rmso=\E&d@,
rmul=\E&d@,
sgr=\E&d%?%p7%t%'s'%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%'@'%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
sgr0=\E&d@,
smacs=^N,
smir=\EQ,
smkx=\E&s1A,
smln=\E&jB,
smso=\E&dJ,
smul=\E&dD,
tbc=\E3,
vpa=\E&a%p1%dY,
# This entry describes an xterm with Sun-style function keys enabled
# via the X resource setting "xterm*sunFunctionKeys:true"
# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
# because we want it to be seen as <kcpy>.
# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
# with their Sun keyboard labels instead.
# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
xterm-sun|xterm with sunFunctionKeys true,
kb2=\E[218z,
kcpy=\E[197z,
kend=\E[220z,
kf1=\E[224z,
kf10=\E[233z,
kf11=\E[192z,
kf12=\E[193z,
kf13=\E[194z,
kf14=\E[195z,
kf15=\E[196z,
kf17=\E[198z,
kf18=\E[199z,
kf19=\E[200z,
kf2=\E[225z,
kf20=\E[201z,
kf3=\E[226z,
kf31=\E[208z,
kf32=\E[209z,
kf33=\E[210z,
kf34=\E[211z,
kf35=\E[212z,
kf36=\E[213z,
kf38=\E[215z,
kf4=\E[227z,
kf40=\E[217z,
kf42=\E[219z,
kf44=\E[221z,
kf5=\E[228z,
kf6=\E[229z,
kf7=\E[230z,
kf8=\E[231z,
kf9=\E[232z,
kfnd=\E[200z,
khlp=\E[196z,
khome=\E[214z,
kich1=\E[2z,
knp=\E[222z,
kpp=\E[216z,
kund=\E[195z,
use=xterm,
xterms-sun|small (80x24) xterm with sunFunctionKeys true,
cols#80,
lines#24,
use=xterm-sun,
# This is for the extensible terminal emulator on the X11R6 contrib tape.
emu|emu native mode,
mir,
msgr,
xon,
colors#15,
cols#80,
it#8,
lines#24,
pairs#64,
vt#200,
acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
bel=^G,
blink=\ES\EW,
bold=\ES\EU,
civis=\EZ,
clear=\EP\EE0;0;,
cnorm=\Ea,
cr=^M,
csr=\Ek%p1%d;%p2%d;,
cub=\Eq-%p1%d;,
cub1=^H,
cud=\Ep%p1%d;,
cud1=\EB,
cuf=\Eq%p1%d;,
cuf1=\ED,
cup=\EE%p1%d;%p2%d;,
cuu=\Ep-%p1%d;,
cuu1=\EA,
dch=\EI%p1%d;,
dch1=\EI1;,
dl=\ER%p1%d;,
dl1=\ER1;,
ech=\Ej%p1%d;,
ed=\EN,
el=\EK,
el1=\EL,
enacs=\0,
home=\EE0;0;,
ht=^I,
hts=\Eh,
il=\EQ%p1%d;,
il1=\EQ1;,
ind=\EG,
is2=\ES\Er0;\Es0;,
kbs=^H,
kcub1=\EC,
kcud1=\EB,
kcuf1=\ED,
kcuu1=\EA,
kdch1=\177,
kent=^M,
kf0=\EF00,
kf1=\EF01,
kf10=\EF10,
kf11=\EF11,
kf12=\EF12,
kf13=\EF13,
kf14=\EF14,
kf15=\EF15,
kf16=\EF16,
kf17=\EF17,
kf18=\EF18,
kf19=\EF19,
kf2=\EF02,
kf20=\EF20,
kf3=\EF03,
kf4=\EF04,
kf5=\EF05,
kf6=\EF06,
kf7=\EF07,
kf8=\EF08,
kf9=\EF09,
kfnd=\Efind,
kich1=\Eins,
knp=\Enext,
kpp=\Eprior,
kslt=\Esel,
oc=\Es0;\Er0;,
rev=\ES\ET,
ri=\EF,
rmacs=\0,
rmir=\EX,
rmso=\ES,
rmul=\ES,
rs2=\ES\Es0;\Er0;,
setab=\Es%i%p1%d;,
setaf=\Er%i%p1%d;,
sgr0=\ES,
smacs=\0,
smir=\EY,
smso=\ES\ET,
smul=\ES\EV,
tbc=\Ej,
###############################################################################
# Aliases which conflict with terminfo.src
ansi|ANSI.SYS color,
use=ansi-emx,
ansi-color-2|ANSI.SYS color 2,
use=ansi-color-2-emx,
ansi-color-3|ANSI.SYS color 3,
use=ansi-color-3-emx,
xterm|vs100|xterm terminal emulator (X11R6 Window System),
use=xterm-r6,