curs_terminfo.3x.html [plain text]
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<!--
****************************************************************************
* Copyright (c) 1999-2002,2003 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* "Software"), to deal in the Software without restriction, including *
* without limitation the rights to use, copy, modify, merge, publish, *
* distribute, distribute with modifications, sublicense, and/or sell *
* copies of the Software, and to permit persons to whom the Software is *
* furnished to do so, subject to the following conditions: *
* *
* The above copyright notice and this permission notice shall be included *
* in all copies or substantial portions of the Software. *
* *
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS *
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF *
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. *
* IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, *
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR *
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR *
* THE USE OR OTHER DEALINGS IN THE SOFTWARE. *
* *
* Except as contained in this notice, the name(s) of the above copyright *
* holders shall not be used in advertising or otherwise to promote the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
* @Id: curs_terminfo.3x,v 1.18 2003/12/27 18:48:59 tom Exp @
-->
<HTML>
<HEAD>
<TITLE>curs_terminfo 3x</TITLE>
<link rev=made href="mailto:bug-ncurses@gnu.org">
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</HEAD>
<BODY>
<H1>curs_terminfo 3x</H1>
<HR>
<PRE>
<!-- Manpage converted by man2html 3.0.1 -->
<STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG> <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
</PRE>
<H2>NAME</H2><PRE>
<STRONG>del_curterm</STRONG>, <STRONG>mvcur</STRONG>, <STRONG>putp</STRONG>, <STRONG>restartterm</STRONG>, <STRONG>set_curterm</STRONG>, <STRONG>set-</STRONG>
<STRONG>term</STRONG>, <STRONG>setupterm</STRONG>, <STRONG>tigetflag</STRONG>, <STRONG>tigetnum</STRONG>, <STRONG>tigetstr</STRONG>, <STRONG>tparm</STRONG>,
<STRONG>tputs</STRONG>, <STRONG>vid_attr</STRONG>, <STRONG>vid_puts</STRONG>, <STRONG>vidattr</STRONG>, <STRONG>vidputs</STRONG> - <STRONG>curses</STRONG>
interfaces to terminfo database
</PRE>
<H2>SYNOPSIS</H2><PRE>
<STRONG>#include</STRONG> <STRONG><curses.h></STRONG>
<STRONG>#include</STRONG> <STRONG><term.h></STRONG>
<STRONG>int</STRONG> <STRONG>setupterm(char</STRONG> <STRONG>*</STRONG><EM>term</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>fildes</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>*</STRONG><EM>errret</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>setterm(char</STRONG> <STRONG>*</STRONG><EM>term</EM><STRONG>);</STRONG>
<STRONG>TERMINAL</STRONG> <STRONG>*set_curterm(TERMINAL</STRONG> <STRONG>*</STRONG><EM>nterm</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>del_curterm(TERMINAL</STRONG> <STRONG>*</STRONG><EM>oterm</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>restartterm(const</STRONG> <STRONG>char</STRONG> <STRONG>*</STRONG><EM>term</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>fildes</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>*</STRONG><EM>errret</EM><STRONG>);</STRONG>
<STRONG>char</STRONG> <STRONG>*tparm(char</STRONG> <STRONG>*</STRONG><EM>str</EM><STRONG>,</STRONG> <STRONG>...);</STRONG>
<STRONG>int</STRONG> <STRONG>tputs(const</STRONG> <STRONG>char</STRONG> <STRONG>*</STRONG><EM>str</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>affcnt</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>(*</STRONG><EM>putc</EM><STRONG>)(int));</STRONG>
<STRONG>int</STRONG> <STRONG>putp(const</STRONG> <STRONG>char</STRONG> <STRONG>*</STRONG><EM>str</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>vidputs(chtype</STRONG> <EM>attrs</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>(*</STRONG><EM>putc</EM><STRONG>)(int));</STRONG>
<STRONG>int</STRONG> <STRONG>vidattr(chtype</STRONG> <EM>attrs</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>vid_puts(attr_t</STRONG> <EM>attrs</EM><STRONG>,</STRONG> <STRONG>short</STRONG> <EM>pair</EM><STRONG>,</STRONG> <STRONG>void</STRONG> <STRONG>*</STRONG><EM>opts</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>(*</STRONG><EM>putc</EM><STRONG>)(char));</STRONG>
<STRONG>int</STRONG> <STRONG>vid_attr(attr_t</STRONG> <EM>attrs</EM><STRONG>,</STRONG> <STRONG>short</STRONG> <EM>pair</EM><STRONG>,</STRONG> <STRONG>void</STRONG> <STRONG>*</STRONG><EM>opts</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>mvcur(int</STRONG> <EM>oldrow</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>oldcol</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>newrow</EM>, int <EM>newcol</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>tigetflag(char</STRONG> <STRONG>*</STRONG><EM>capname</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>tigetnum(char</STRONG> <STRONG>*</STRONG><EM>capname</EM><STRONG>);</STRONG>
<STRONG>char</STRONG> <STRONG>*tigetstr(char</STRONG> <STRONG>*</STRONG><EM>capname</EM><STRONG>);</STRONG>
</PRE>
<H2>DESCRIPTION</H2><PRE>
These low-level routines must be called by programs that
have to deal directly with the <STRONG>terminfo</STRONG> database to handle
certain terminal capabilities, such as programming func-
tion keys. For all other functionality, <STRONG>curses</STRONG> routines
are more suitable and their use is recommended.
Initially, <STRONG>setupterm</STRONG> should be called. Note that
<STRONG>setupterm</STRONG> is automatically called by <STRONG>initscr</STRONG> and <STRONG>newterm</STRONG>.
This defines the set of terminal-dependent variables
[listed in <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>]. The <STRONG>terminfo</STRONG> variables <STRONG>lines</STRONG> and
<STRONG>columns</STRONG> are initialized by <STRONG>setupterm</STRONG> as follows: If
<STRONG>use_env(FALSE)</STRONG> has been called, values for <STRONG>lines</STRONG> and
<STRONG>columns</STRONG> specified in <STRONG>terminfo</STRONG> are used. Otherwise, if the
environment variables <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> exist, their val-
ues are used. If these environment variables do not exist
and the program is running in a window, the current window
size is used. Otherwise, if the environment variables do
not exist, the values for <STRONG>lines</STRONG> and <STRONG>columns</STRONG> specified in
the <STRONG>terminfo</STRONG> database are used.
The header files <STRONG>curses.h</STRONG> and <STRONG>term.h</STRONG> should be included
(in this order) to get the definitions for these strings,
numbers, and flags. Parameterized strings should be
passed through <STRONG>tparm</STRONG> to instantiate them. All <STRONG>terminfo</STRONG>
strings [including the output of <STRONG>tparm</STRONG>] should be printed
with <STRONG>tputs</STRONG> or <STRONG>putp</STRONG>. Call the <STRONG>reset_shell_mode</STRONG> to restore
the tty modes before exiting [see <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>]. Pro-
grams which use cursor addressing should output
<STRONG>enter_ca_mode</STRONG> upon startup and should output <STRONG>exit_ca_mode</STRONG>
before exiting. Programs desiring shell escapes should
call
<STRONG>reset_shell_mode</STRONG> and output <STRONG>exit_ca_mode</STRONG> before the shell
is called and should output <STRONG>enter_ca_mode</STRONG> and call
<STRONG>reset_prog_mode</STRONG> after returning from the shell.
The <STRONG>setupterm</STRONG> routine reads in the <STRONG>terminfo</STRONG> database, ini-
tializing the <STRONG>terminfo</STRONG> structures, but does not set up the
output virtualization structures used by <STRONG>curses</STRONG>. The ter-
minal type is the character string <EM>term</EM>; if <EM>term</EM> is null,
the environment variable <STRONG>TERM</STRONG> is used. All output is to
file descriptor <STRONG>fildes</STRONG> which is initialized for output.
If <EM>errret</EM> is not null, then <STRONG>setupterm</STRONG> returns <STRONG>OK</STRONG> or <STRONG>ERR</STRONG>
and stores a status value in the integer pointed to by
<EM>errret</EM>. A return value of <STRONG>OK</STRONG> combined with status of <STRONG>1</STRONG> in
<EM>errret</EM> is normal. If <STRONG>ERR</STRONG> is returned, examine <EM>errret</EM>:
<STRONG>1</STRONG> means that the terminal is hardcopy, cannot be
used for curses applications.
<STRONG>0</STRONG> means that the terminal could not be found, or
that it is a generic type, having too little
information for curses applications to run.
<STRONG>-1</STRONG> means that the <STRONG>terminfo</STRONG> database could not be
found.
If <EM>errret</EM> is null, <STRONG>setupterm</STRONG> prints an error message upon
finding an error and exits. Thus, the simplest call is:
<STRONG>setupterm((char</STRONG> <STRONG>*)0,</STRONG> <STRONG>1,</STRONG> <STRONG>(int</STRONG> <STRONG>*)0);</STRONG>,
which uses all the defaults and sends the output to <STRONG>std-</STRONG>
<STRONG>out</STRONG>.
The <STRONG>setterm</STRONG> routine is being replaced by <STRONG>setupterm</STRONG>. The
call:
<STRONG>setupterm(</STRONG><EM>term</EM><STRONG>,</STRONG> <STRONG>1,</STRONG> <STRONG>(int</STRONG> <STRONG>*)0)</STRONG>
provides the same functionality as <STRONG>setterm(</STRONG><EM>term</EM><STRONG>)</STRONG>. The
<STRONG>setterm</STRONG> routine is included here for BSD compatibility,
and is not recommended for new programs.
The <STRONG>set_curterm</STRONG> routine sets the variable <STRONG>cur_term</STRONG> to
<EM>nterm</EM>, and makes all of the <STRONG>terminfo</STRONG> boolean, numeric, and
string variables use the values from <EM>nterm</EM>. It returns
the old value of <STRONG>cur_term</STRONG>.
The <STRONG>del_curterm</STRONG> routine frees the space pointed to by
<EM>oterm</EM> and makes it available for further use. If <EM>oterm</EM> is
the same as <STRONG>cur_term</STRONG>, references to any of the <STRONG>terminfo</STRONG>
boolean, numeric, and string variables thereafter may
refer to invalid memory locations until another <STRONG>setupterm</STRONG>
has been called.
The <STRONG>restartterm</STRONG> routine is similar to <STRONG>setupterm</STRONG> and
<STRONG>initscr</STRONG>, except that it is called after restoring memory
to a previous state (for example, when reloading a game
saved as a core image dump). It assumes that the windows
and the input and output options are the same as when mem-
ory was saved, but the terminal type and baud rate may be
different. Accordingly, it saves various tty state bits,
does a setupterm, and then restores the bits.
The <STRONG>tparm</STRONG> routine instantiates the string <EM>str</EM> with parame-
ters <EM>pi</EM>. A pointer is returned to the result of <EM>str</EM> with
the parameters applied.
The <STRONG>tputs</STRONG> routine applies padding information to the
string <EM>str</EM> and outputs it. The <EM>str</EM> must be a terminfo
string variable or the return value from <STRONG>tparm</STRONG>, <STRONG>tgetstr</STRONG>,
or <STRONG>tgoto</STRONG>. <EM>affcnt</EM> is the number of lines affected, or 1 if
not applicable. <EM>putc</EM> is a <STRONG>putchar</STRONG>-like routine to which
the characters are passed, one at a time.
The <STRONG>putp</STRONG> routine calls <STRONG>tputs(</STRONG><EM>str</EM><STRONG>,</STRONG> <STRONG>1,</STRONG> <STRONG>putchar)</STRONG>. Note that
the output of <STRONG>putp</STRONG> always goes to <STRONG>stdout</STRONG>, not to the
<EM>fildes</EM> specified in <STRONG>setupterm</STRONG>.
The <STRONG>vidputs</STRONG> routine displays the string on the terminal in
the video attribute mode <EM>attrs</EM>, which is any combination
of the attributes listed in <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>. The characters
are passed to the <STRONG>putchar</STRONG>-like routine <EM>putc</EM>.
The <STRONG>vidattr</STRONG> routine is like the <STRONG>vidputs</STRONG> routine, except
that it outputs through <STRONG>putchar</STRONG>.
The <STRONG>vid_attr</STRONG> and <STRONG>vid_puts</STRONG> routines correspond to vidattr
and vidputs, respectively. They use a set of arguments
for representing the video attributes plus color, i.e.,
one of type attr_t for the attributes and one of short for
the color_pair number. The <STRONG>vid_attr</STRONG> and <STRONG>vid_puts</STRONG> routines
are designed to use the attribute constants with the <EM>WA</EM><STRONG>_</STRONG>
prefix. The opts argument is reserved for future use.
Currently, applications must provide a null pointer for
that argument.
The <STRONG>mvcur</STRONG> routine provides low-level cursor motion. It
takes effect immediately (rather than at the next
refresh).
The <STRONG>tigetflag</STRONG>, <STRONG>tigetnum</STRONG> and <STRONG>tigetstr</STRONG> routines return the
value of the capability corresponding to the <STRONG>terminfo</STRONG> <EM>cap-</EM>
<EM>name</EM> passed to them, such as <STRONG>xenl</STRONG>.
The <STRONG>tigetflag</STRONG> routine returns the value <STRONG>-1</STRONG> if <EM>capname</EM> is
not a boolean capability, or <STRONG>0</STRONG> if it is canceled or absent
from the terminal description.
The <STRONG>tigetnum</STRONG> routine returns the value <STRONG>-2</STRONG> if <EM>capname</EM> is
not a numeric capability, or <STRONG>-1</STRONG> if it is canceled or
absent from the terminal description.
The <STRONG>tigetstr</STRONG> routine returns the value <STRONG>(char</STRONG> <STRONG>*)-1</STRONG> if <EM>cap-</EM>
<EM>name</EM> is not a string capability, or <STRONG>0</STRONG> if it is canceled or
absent from the terminal description.
The <EM>capname</EM> for each capability is given in the table col-
umn entitled <EM>capname</EM> code in the capabilities section of
<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>.
<STRONG>char</STRONG> <STRONG>*boolnames</STRONG>, <STRONG>*boolcodes</STRONG>, <STRONG>*boolfnames</STRONG>
<STRONG>char</STRONG> <STRONG>*numnames</STRONG>, <STRONG>*numcodes</STRONG>, <STRONG>*numfnames</STRONG>
<STRONG>char</STRONG> <STRONG>*strnames</STRONG>, <STRONG>*strcodes</STRONG>, <STRONG>*strfnames</STRONG>
These null-terminated arrays contain the <EM>capnames</EM>, the
<STRONG>termcap</STRONG> codes, and the full C names, for each of the <STRONG>ter-</STRONG>
<STRONG>minfo</STRONG> variables.
</PRE>
<H2>RETURN VALUE</H2><PRE>
Routines that return an integer return <STRONG>ERR</STRONG> upon failure
and <STRONG>OK</STRONG> (SVr4 only specifies "an integer value other than
<STRONG>ERR</STRONG>") upon successful completion, unless otherwise noted
in the preceding routine descriptions.
Routines that return pointers always return <STRONG>NULL</STRONG> on error.
</PRE>
<H2>NOTES</H2><PRE>
The <STRONG>setupterm</STRONG> routine should be used in place of <STRONG>setterm</STRONG>.
It may be useful when you want to test for terminal capa-
bilities without committing to the allocation of storage
involved in <STRONG>initscr</STRONG>.
Note that <STRONG>vidattr</STRONG> and <STRONG>vidputs</STRONG> may be macros.
</PRE>
<H2>PORTABILITY</H2><PRE>
The function <STRONG>setterm</STRONG> is not described in the XSI Curses
standard and must be considered non-portable. All other
functions are as described in the XSI curses standard.
In System V Release 4, <STRONG>set_curterm</STRONG> has an <STRONG>int</STRONG> return type
and returns <STRONG>OK</STRONG> or <STRONG>ERR</STRONG>. We have chosen to implement the
XSI Curses semantics.
In System V Release 4, the third argument of <STRONG>tputs</STRONG> has the
type <STRONG>int</STRONG> <STRONG>(*putc)(char)</STRONG>.
The XSI Curses standard prototypes <STRONG>tparm</STRONG> with a fixed num-
ber of parameters, rather than a variable argument list.
This implementation uses a variable argument list.
Portable applications should provide 9 parameters after
the format; zeroes are fine for this purpose.
XSI notes that after calling <STRONG>mvcur</STRONG>, the curses state may
not match the actual terminal state, and that an applica-
tion should touch and refresh the window before resuming
normal curses calls. Both ncurses and System V Release 4
curses implement <STRONG>mvcur</STRONG> using the SCREEN data allocated in
either <STRONG>initscr</STRONG> or <STRONG>newterm</STRONG>. So though it is documented as
a terminfo function, <STRONG>mvcur</STRONG> is really a curses function
which is not well specified.
</PRE>
<H2>SEE ALSO</H2><PRE>
<STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>, <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>, <STRONG>curs_term-</STRONG>
<STRONG><A HREF="curs_termcap.3x.html">cap(3x)</A></STRONG>, <STRONG><A HREF="putc.3S.html">putc(3S)</A></STRONG>, <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
<STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
</PRE>
<HR>
<ADDRESS>
Man(1) output converted with
<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>
</ADDRESS>
</BODY>
</HTML>