# Copyright (C) 1998-2008 by the Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
dnl Process this file with autoconf to produce a configure script.
AC_REVISION($Revision: 8122 $)
AC_PREREQ(2.0)
AC_INIT(src/common.h)
# /usr/local/mailman is the default installation directory
AC_PREFIX_DEFAULT(/usr/local/mailman)
# Check for Python! Better be found on $PATH
AC_MSG_CHECKING(for --with-python)
AC_ARG_WITH(python, dnl
[ --with-python specify path to Python interpreter])
case "$with_python" in
"") ans="no";;
*) ans="$with_python"
esac
AC_MSG_RESULT($ans)
if test -z "$with_python"
then
AC_PATH_PROG(with_python, python, /usr/local/bin/python)
fi
AC_MSG_CHECKING(Python interpreter)
if test ! -x $with_python
then
AC_MSG_ERROR([
***** No Python interpreter found!
***** Try including the configure option
***** --with-python=/path/to/python/interpreter])
fi
AC_SUBST(PYTHON)
PYTHON=$with_python
AC_MSG_RESULT($PYTHON)
# See if Python is new enough.
AC_MSG_CHECKING(Python version)
changequote(,)
cat > conftest.py <<EOF
import sys
try:
v = sys.hexversion
except AttributeError:
v = 0
if v >= 0x2040000:
s = sys.version.split()[0]
else:
s = ""
fp = open("conftest.out", "w")
fp.write("%s\n" % s)
fp.close()
EOF
changequote([, ])
$PYTHON conftest.py
version=`cat conftest.out`
rm -f conftest.out conftest.py
if test -z "$version"
then
AC_MSG_ERROR([
***** $PYTHON is too old (or broken)
***** Python 2.4 or newer is required])
fi
AC_MSG_RESULT($version)
# Check the email package version.
AC_MSG_CHECKING(Python's email package)
changequote(,)
cat > conftest.py <<EOF
import sys
try:
import email
except ImportError:
res = "not ok"
else:
provided = (2, 5, 8)
version = tuple(int(v) for v in email.__version__.split('.'))
if provided > version:
res = "not ok"
else:
res = "ok"
fp = open("conftest.out", "w")
fp.write("%s\n" % res)
fp.close()
EOF
changequote([, ])
$PYTHON conftest.py
needemailpkg=`cat conftest.out`
rm -f conftest.out conftest.py
# Should we rely on Python's own email package or use the pre-packaged version?
AC_SUBST(EMAILPKG)
if test "$needemailpkg" = "ok"
then
EMAILPKG=""
else
EMAILPKG=email-2.5.8
fi
AC_MSG_RESULT($needemailpkg)
# Make sure distutils is available. Some Linux Python packages split
# distutils into the "-devel" package, so they need both.
AC_MSG_CHECKING(that Python has a working distutils)
changequote(,)
cat > conftest.py <<EOF
try:
import distutils.errors
import distutils.sysconfig
except ImportError:
res = "no"
else:
try:
distutils.sysconfig.get_config_vars()
except distutils.errors.DistutilsPlatformError:
res = "no"
else:
# some RedHat packages put distutils in python, but the C headers
# are in python-devel so check for headers too.
import os.path
pdothpath = distutils.sysconfig.get_config_var('CONFINCLUDEPY')
if os.path.isfile(os.path.join(pdothpath, "Python.h")):
res = "yes"
else:
res = "no"
fp = open("conftest.out", "w")
fp.write("%s\n" % res)
fp.close()
EOF
changequote([, ])
$PYTHON conftest.py
havedistutils=`cat conftest.out`
rm -f conftest.out conftest.py
if test "$havedistutils" != "yes"
then
AC_MSG_ERROR([
***** Distutils is not available or is incomplete for $PYTHON
***** If you installed Python from RPM (or other package manager)
***** be sure to install the -devel package, or install Python
***** from source. See sec. 15.1 of the Installation Manual for
***** details])
fi
AC_MSG_RESULT($havedistutils)
# Checks for programs.
AC_PROG_INSTALL
AC_PROG_MAKE_SET
AC_PATH_PROG(TRUE, true, true, $PATH:/bin:/usr/bin)
# Find compiler, allow alternatives to gcc
AC_MSG_CHECKING(for --without-gcc)
AC_ARG_WITH(gcc, [ --without-gcc never use gcc], [
case $withval in
no) CC=cc
without_gcc=yes;;
yes) CC=gcc
without_gcc=no;;
*) CC=$withval
without_gcc=$withval;;
esac], without_gcc=no;)
AC_MSG_RESULT($without_gcc)
# If the user switches compilers, we can't believe the cache
if test ! -z "$ac_cv_prog_CC" -a ! -z "$CC" -a "$CC" != "$ac_cv_prog_CC"
then
AC_ERROR(cached CC is different -- throw away $cache_file
(it is also a good idea to do 'make clean' before compiling))
fi
AC_PROG_CC
# Optimizer/debugger flags passed between Makefiles
AC_SUBST(OPT)
if test -z "$OPT"
then
case $GCC in
yes)
case $ac_cv_prog_cc_g in
yes) OPT="-g -O2";;
*) OPT="-O2";;
esac
;;
*) OPT="-O";;
esac
fi
# We better be able to execute interpreters
AC_SYS_INTERPRETER
if test "$ac_cv_sys_interpreter" != "yes"
then
AC_MSG_ERROR([
***** Cannot execute interpreter scripts?
***** Are you sure you system doesn't support this?])
fi
# Check for an alternate data directory, separate from installation dir.
default_var_prefix="/var/mailman"
AC_SUBST(VAR_PREFIX)
AC_MSG_CHECKING(for --with-var-prefix)
AC_ARG_WITH(var-prefix, dnl
[ --with-var-prefix directory for mutable data [/var/mailman]])
case "$with_var_prefix" in
yes) VAR_PREFIX="$default_var_prefix"; ans=$VAR_PREFIX;;
""|no) VAR_PREFIX="$prefix"; ans="no";;
*) VAR_PREFIX="$with_var_prefix"; ans=$VAR_PREFIX;
esac
AC_MSG_RESULT($ans)
AC_MSG_CHECKING(for --with-permcheck)
AC_ARG_WITH(permcheck, dnl
[ --without-permcheck skip the check for target directory permissions])
if test -z "$with_permcheck"
then
with_permcheck="yes"
fi
AC_MSG_RESULT($with_permcheck)
# Now make sure that $prefix is set up correctly. It must be group
# owned by the target group, it must have the group sticky bit set, and
# it must be a+rx
if test "$VAR_PREFIX" = "NONE"
then
VAR_PREFIX=$ac_default_prefix
prefixcheck=$ac_default_prefix
else
prefixcheck=$VAR_PREFIX
fi
# new macro for finding group names
AC_DEFUN([MM_FIND_GROUP_NAME], [
# $1 == variable name
# $2 == user id to check for
AC_SUBST($1)
changequote(,)
if test -z "$$1"
then
cat > conftest.py <<EOF
import grp
gid = ''
for group in "$2".split():
try:
try:
gname = grp.getgrgid(int(group))[0]
break
except ValueError:
gname = grp.getgrnam(group)[0]
break
except KeyError:
gname = ''
fp = open("conftest.out", "w")
fp.write("%s\n" % gname)
fp.close()
EOF
$PYTHON conftest.py
$1=`cat conftest.out`
fi
changequote([, ])
rm -f conftest.out conftest.py])
# new macro for finding UIDs
AC_DEFUN([MM_FIND_USER_NAME], [
# $1 == variable name
# $2 == user id to check for
AC_SUBST($1)
changequote(,)
if test -z "$$1"
then
cat > conftest.py <<EOF
import pwd
uid = ''
for user in "$2".split():
try:
try:
uname = pwd.getpwuid(int(user))[0]
break
except ValueError:
uname = pwd.getpwnam(user)[0]
break
except KeyError:
uname = ''
fp = open("conftest.out", "w")
fp.write("%s\n" % uname)
fp.close()
EOF
$PYTHON conftest.py
$1=`cat conftest.out`
fi
changequote([, ])
rm -f conftest.out conftest.py])
# Check for some other uid to use than `mailman'
AC_MSG_CHECKING(for --with-username)
AC_ARG_WITH(username, dnl
[ --with-username specify a user name other than \"mailman\"])
if test -z "$with_username"
then
with_username="mailman"
fi
USERNAME=$with_username
AC_MSG_RESULT($USERNAME)
# User `mailman' must exist
AC_SUBST(MAILMAN_USER)
AC_MSG_CHECKING(for user name \"$USERNAME\")
MM_FIND_USER_NAME(MAILMAN_USER, $USERNAME)
if test -z "$MAILMAN_USER"
then
if test "$with_permcheck" = "yes"
then
AC_MSG_ERROR([
***** No \"$USERNAME\" user found!
***** Your system must have a \"$USERNAME\" user defined
***** (usually in your /etc/passwd file). Please see the INSTALL
***** file for details.])
fi
fi
AC_MSG_RESULT(okay)
# Check for some other gid to use than `mailman'
AC_MSG_CHECKING(for --with-groupname)
AC_ARG_WITH(groupname, dnl
[ --with-groupname specify a group name other than \"mailman\"])
if test -z "$with_groupname"
then
with_groupname="mailman"
fi
GROUPNAME=$with_groupname
AC_MSG_RESULT($GROUPNAME)
# Target group must exist
AC_SUBST(MAILMAN_GROUP)
AC_MSG_CHECKING(for group name \"$GROUPNAME\")
MM_FIND_GROUP_NAME(MAILMAN_GROUP, $GROUPNAME)
if test -z "$MAILMAN_GROUP"
then
if test "$with_permcheck" = "yes"
then
AC_MSG_ERROR([
***** No \"$GROUPNAME\" group found!
***** Your system must have a \"$GROUPNAME\" group defined
***** (usually in your /etc/group file). Please see the INSTALL
***** file for details.])
fi
fi
AC_MSG_RESULT(okay)
AC_MSG_CHECKING(permissions on $prefixcheck)
changequote(,)
cat > conftest.py <<EOF
import os, grp
from stat import *
prefix = "$prefixcheck"
groupname = "$GROUPNAME"
mailmangroup = "$MAILMAN_GROUP"
try:
mailmangid = grp.getgrnam(mailmangroup)[2]
except KeyError:
mailmangid = -1
problems = []
try: statdata = os.stat(prefix)
except OSError:
problems.append("Directory doesn't exist: " + prefix)
else:
mode = statdata[ST_MODE]
gid = statdata[ST_GID]
if mailmangid <> gid:
problems.append("Directory must be owned by group " +
groupname + ": " + prefix)
perms = S_IRWXU | S_IRWXG | S_IROTH | S_IXOTH
if (mode & perms) <> perms:
problems.append("Permissions should be at least 0775: " + prefix)
if not problems:
msg = "okay\n"
else:
msg = '***** ' + '\n***** '.join(problems) + '\n'
fp = open("conftest.out", "w")
fp.write(msg)
fp.close()
EOF
changequote([, ])
$PYTHON conftest.py
status=`cat conftest.out`
rm -f conftest.out conftest.py
if test "$with_permcheck" = "yes"
then
if test "$status" != "okay"
then
AC_MSG_ERROR([
***** Installation directory $prefixcheck is not configured properly!
$status])
fi
else
status="skipped"
fi
AC_MSG_RESULT($status)
# Now find the UIDs and GIDs
# Support --with-mail-gid and --with-cgi-gid
AC_MSG_CHECKING(for mail wrapper group; i.e. --with-mail-gid)
AC_ARG_WITH(mail-gid, dnl
[ --with-mail-gid group name mail programs run as])
if test -z "$with_mail_gid"
then
with_mail_gid="mailman other mail daemon"
fi
MM_FIND_GROUP_NAME(MAIL_GROUP, $with_mail_gid)
if test -z "$MAIL_GROUP"
then
if test "$with_permcheck" = "yes"
then
AC_MSG_ERROR([
***** No group name \"$with_mail_gid\" found for the mail wrapper program.
***** This is the group that your mail server will use to run Mailman's
***** programs. You should specify an existing group with the
***** --with-mail-gid configure option, or use --without-permcheck to
***** skip this verification step. See also your mail server's documentation,
***** and Mailman's INSTALL file for details])
else
MAIL_GROUP=$with_mail_gid
fi
fi
AC_MSG_RESULT($MAIL_GROUP)
AC_MSG_CHECKING(for CGI wrapper group; i.e. --with-cgi-gid)
AC_ARG_WITH(cgi-gid, dnl
[ --with-cgi-gid group name CGI programs run as])
if test -z "$with_cgi_gid"
then
with_cgi_gid="www www-data nobody"
fi
MM_FIND_GROUP_NAME(CGI_GROUP, $with_cgi_gid)
if test -z "$CGI_GROUP"
then
if test "$with_permcheck" = "yes"
then
AC_MSG_ERROR([
***** No group name \"$with_cgi_gid\" found for the CGI wrapper program.
***** This is the group that your web server will use to run Mailman's
***** programs. You should specify an existing group with the
***** --with-cgi-gid configure option, or use --without-permcheck to
***** skip this verification step. See also your web server's documentation,
***** and Mailman's INSTALL file for details])
else
CGI_GROUP=$with_cgi_gid
fi
fi
AC_MSG_RESULT($CGI_GROUP)
# Check for CGI extensions, required by some Web servers
AC_SUBST(CGIEXT)
AC_MSG_CHECKING(for CGI extensions)
AC_ARG_WITH(cgi-ext, dnl
[ --with-cgi-ext specify extension for CGI programs (include dot)])
if test -z "$with_cgi_ext"
then
CGIEXT=''
with_cgi_ext='no'
else
CGIEXT=$with_cgi_ext
fi
AC_MSG_RESULT($with_cgi_ext)
# figure out the default mail hostname and url host component
AC_SUBST(MAILHOST)
AC_MSG_CHECKING(for --with-mailhost)
AC_ARG_WITH(mailhost, dnl
[ --with-mailhost specify the hostname part for outgoing email])
if test -z "$with_mailhost"
then
MAILHOST=''
with_mailhost='no'
else
MAILHOST=$with_mailhost
fi
AC_MSG_RESULT($with_mailhost)
AC_SUBST(URLHOST)
AC_MSG_CHECKING(for --with-urlhost)
AC_ARG_WITH(urlhost, dnl
[ --with-urlhost specify the hostname part of urls])
if test -z "$with_urlhost"
then
URLHOST=''
with_urlhost='no'
else
URLHOST=$with_urlhost
fi
AC_MSG_RESULT($with_urlhost)
changequote(,)
cat > conftest.py <<EOF
# python
from socket import *
fqdn = getfqdn()
fp = open('conftest.out', 'w')
print >> fp, fqdn
print >> fp, fqdn
fp.close()
EOF
$PYTHON conftest.py
changequote([, ])
AC_MSG_CHECKING(for default mail host name)
if test -z "$MAILHOST"
then
MAILHOST=`sed q conftest.out`
fi
AC_MSG_RESULT($MAILHOST)
AC_MSG_CHECKING(for default URL host component)
if test -z "$URLHOST"
then
URLHOST=`sed -n '$p' conftest.out`
fi
AC_MSG_RESULT($URLHOST)
rm -f conftest.out conftest.py
# Checks for libraries.
AC_CHECK_FUNCS(strerror setregid syslog)
if test $ac_cv_func_syslog = no; then
# syslog is not in the default libraries. See if it's in some other.
# Additionally, for at least SCO OpenServer, syslog() is #defined to
# one of several _real_ functions in syslog.h, so we need to do the test
# with the appropriate include.
for lib in bsd socket inet; do
AC_MSG_CHECKING(for syslog in -l$lib)
Mailman_LIBS_save="$LIBS"; LIBS="$LIBS -l$lib"
AC_TRY_LINK([#include <syslog.h>],
[syslog(LOG_DEBUG, "Just a test...");],
[AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_SYSLOG)
break],
[AC_MSG_RESULT(no)
LIBS="$Mailman_LIBS_save"])
unset Mailman_LIBS_save
done
fi
# Checks for header files.
AC_HEADER_STDC
AC_CHECK_HEADERS(syslog.h)
# Checks for typedefs, structures, and compiler characteristics.
AC_TYPE_UID_T
AC_TYPE_GETGROUPS
# Checks for library functions.
AC_CHECK_FUNCS(vsnprintf)
dnl Expand PYTHON path in the scripts, output into build/scriptname
AC_DEFUN([MM_SCRIPTS], [dnl
bin/add_members \
bin/arch \
bin/change_pw \
bin/check_db \
bin/check_perms \
bin/cleanarch \
bin/clone_member \
bin/config_list \
bin/convert.py \
bin/discard \
bin/dumpdb \
bin/export.py \
bin/find_member \
bin/fix_url.py \
bin/genaliases \
bin/inject \
bin/list_admins \
bin/list_lists \
bin/list_members \
bin/list_owners \
bin/mailmanctl \
bin/mmsitepass \
bin/msgfmt.py \
bin/newlist \
bin/pygettext.py \
bin/qrunner \
bin/remove_members \
bin/reset_pw.py \
bin/rmlist \
bin/show_qfiles \
bin/sync_members \
bin/transcheck \
bin/unshunt \
bin/update \
bin/version \
bin/withlist \
bin/b4b5-archfix \
bin/rb-archfix \
contrib/check_perms_grsecurity.py \
contrib/qmail-to-mailman.py \
contrib/rotatelogs.py \
cron/bumpdigests \
cron/checkdbs \
cron/cull_bad_shunt \
cron/disabled \
cron/gate_news \
cron/mailpasswds \
cron/nightly_gzip \
cron/senddigests \
])
dnl Please make sure to leave a space at the end of the last entry.
dnl (This is so we don't have to use [a-z/] style character classes
dnl in the regexp below and mess with m4 quoting, which is not fun.)
dnl This regexp munges each line in MM_SCRIPTS, replacing:
dnl path/script \
dnl with:
dnl build/path/script:path/script \
dnl so that we can macro-expand variables in scripts without using
dnl script.in filenames, outputting the new files in build/ .
SCRIPTS="patsubst(MM_SCRIPTS, \(.+\) \(\\?\), build/\1:\1 \2)"
AC_SUBST(SCRIPTS)
# These directories are temporary directories to store macro-expanded
# scripts. They're removed on a make distclean, so we make them here.
mkdir -p build/bin build/contrib build/cron
dnl Output everything
AC_OUTPUT([misc/paths.py Mailman/Defaults.py Mailman/mm_cfg.py.dist
src/Makefile misc/Makefile bin/Makefile
Mailman/Makefile Mailman/Cgi/Makefile Mailman/Logging/Makefile
Mailman/Archiver/Makefile Mailman/Commands/Makefile
Mailman/Handlers/Makefile Mailman/Bouncers/Makefile
Mailman/Queue/Makefile Mailman/MTA/Makefile Mailman/Gui/Makefile
templates/Makefile cron/Makefile scripts/Makefile messages/Makefile
cron/crontab.in misc/mailman Makefile
tests/Makefile tests/bounces/Makefile tests/msgs/Makefile
$SCRIPTS],
echo "configuration completed at" `date`)
# Make sure all the build scripts are executable.
chmod -R +x build
# Test for the Chinese codecs.
dnl AC_MSG_CHECKING(for Python Chinese Unicode codecs)
dnl cat > conftest.py <<EOF
dnl try:
dnl unicode("abc", "big5-tw")
dnl print "found"
dnl except LookupError:
dnl print "not found"
dnl EOF
dnl chinese=`$PYTHON conftest.py 2>/dev/null`
dnl rm -f conftest.py
dnl AC_MSG_RESULT($chinese)
dnl if test "x$chinese" != "xfound"
dnl then
dnl AC_MSG_WARN([
dnl ***** Python Unicode codecs for Chinese not found.
dnl ***** Chinese emails generated by or manipulated in Mailman will not
dnl ***** be sent in the correct encoding and may be unreadable.
dnl ***** Please uncompress and install the Chinese codecs from:
dnl ***** http://sourceforge.net/projects/python-codecs/
dnl *****
dnl ***** Note: Everything else will work just fine.
dnl ])
dnl fi