------------------------------------------------------------------------------ -- -- -- GNAT RUN-TIME LIBRARY (GNARL) COMPONENTS -- -- -- -- S Y S T E M . T A S K I N G . S T A G E S -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2006, Free Software Foundation, Inc. -- -- -- -- GNARL is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 2, or (at your option) any later ver- -- -- sion. GNARL is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNARL; see file COPYING. If not, write -- -- to the Free Software Foundation, 51 Franklin Street, Fifth Floor, -- -- Boston, MA 02110-1301, USA. -- -- -- -- As a special exception, if other files instantiate generics from this -- -- unit, or you link this unit with other files to produce an executable, -- -- this unit does not by itself cause the resulting executable to be -- -- covered by the GNU General Public License. This exception does not -- -- however invalidate any other reasons why the executable file might be -- -- covered by the GNU Public License. -- -- -- -- GNARL was developed by the GNARL team at Florida State University. -- -- Extensive contributions were provided by Ada Core Technologies, Inc. -- -- -- ------------------------------------------------------------------------------ pragma Polling (Off); -- Turn off polling, we do not want ATC polling to take place during -- tasking operations. It causes infinite loops and other problems. with Ada.Exceptions; -- Used for Raise_Exception with System.Tasking.Debug; -- Used for enabling tasking facilities with gdb with System.Address_Image; -- Used for the function itself with System.Task_Primitives.Operations; -- Used for Finalize_Lock -- Enter_Task -- Write_Lock -- Unlock -- Sleep -- Wakeup -- Get_Priority -- Lock/Unlock_RTS -- New_ATCB with System.Soft_Links; -- These are procedure pointers to non-tasking routines that use task -- specific data. In the absence of tasking, these routines refer to global -- data. In the presense of tasking, they must be replaced with pointers to -- task-specific versions. Also used for Create_TSD, Destroy_TSD, -- Get_Current_Excep, Finalize_Global_List, Task_Termination, Handler. with System.Tasking.Initialization; -- Used for Remove_From_All_Tasks_List -- Defer_Abort -- Undefer_Abort -- Initialization.Poll_Base_Priority_Change -- Finalize_Attributes_Link -- Initialize_Attributes_Link pragma Elaborate_All (System.Tasking.Initialization); -- This insures that tasking is initialized if any tasks are created with System.Tasking.Utilities; -- Used for Make_Passive -- Abort_One_Task -- Abort_Tasks with System.Tasking.Queuing; -- Used for Dequeue_Head with System.Tasking.Rendezvous; -- Used for Call_Simple with System.OS_Primitives; -- Used for Delay_Modes with System.Secondary_Stack; -- Used for SS_Init with System.Storage_Elements; -- Used for Storage_Array with System.Restrictions; -- Used for Abort_Allowed with System.Standard_Library; -- Used for Exception_Trace with System.Traces.Tasking; -- Used for Send_Trace_Info with Unchecked_Deallocation; -- To recover from failure of ATCB initialization with System.Stack_Usage; package body System.Tasking.Stages is package STPO renames System.Task_Primitives.Operations; package SSL renames System.Soft_Links; package SSE renames System.Storage_Elements; package SST renames System.Secondary_Stack; use Ada.Exceptions; use Parameters; use Task_Primitives; use Task_Primitives.Operations; use Task_Info; use System.Traces; use System.Traces.Tasking; ----------------------- -- Local Subprograms -- ----------------------- procedure Free is new Unchecked_Deallocation (Ada_Task_Control_Block, Task_Id); procedure Trace_Unhandled_Exception_In_Task (Self_Id : Task_Id); -- This procedure outputs the task specific message for exception -- tracing purposes. procedure Task_Wrapper (Self_ID : Task_Id); pragma Convention (C, Task_Wrapper); -- This is the procedure that is called by the GNULL from the new context -- when a task is created. It waits for activation and then calls the task -- body procedure. When the task body procedure completes, it terminates -- the task. -- -- The Task_Wrapper's address will be provided to the underlying threads -- library as the task entry point. Convention C is what makes most sense -- for that purpose (Export C would make the function globally visible, -- and affect the link name on which GDB depends). This will in addition -- trigger an automatic stack alignment suitable for GCC's assumptions if -- need be. procedure Vulnerable_Complete_Task (Self_ID : Task_Id); -- Complete the calling task. This procedure must be called with -- abort deferred. It should only be called by Complete_Task and -- Finalizate_Global_Tasks (for the environment task). procedure Vulnerable_Complete_Master (Self_ID : Task_Id); -- Complete the current master of the calling task. This procedure -- must be called with abort deferred. It should only be called by -- Vulnerable_Complete_Task and Complete_Master. procedure Vulnerable_Complete_Activation (Self_ID : Task_Id); -- Signal to Self_ID's activator that Self_ID has completed activation. -- This procedure must be called with abort deferred. procedure Abort_Dependents (Self_ID : Task_Id); -- Abort all the direct dependents of Self at its current master -- nesting level, plus all of their dependents, transitively. -- RTS_Lock should be locked by the caller. procedure Vulnerable_Free_Task (T : Task_Id); -- Recover all runtime system storage associated with the task T. -- This should only be called after T has terminated and will no -- longer be referenced. -- -- For tasks created by an allocator that fails, due to an exception, -- it is called from Expunge_Unactivated_Tasks. -- -- It is also called from Unchecked_Deallocation, for objects that -- are or contain tasks. -- -- Different code is used at master completion, in Terminate_Dependents, -- due to a need for tighter synchronization with the master. ---------------------- -- Abort_Dependents -- ---------------------- procedure Abort_Dependents (Self_ID : Task_Id) is C : Task_Id; P : Task_Id; begin C := All_Tasks_List; while C /= null loop P := C.Common.Parent; while P /= null loop if P = Self_ID then -- ??? C is supposed to take care of its own dependents, so -- there should be no need to worry about them. Need to double -- check this. if C.Master_of_Task = Self_ID.Master_Within then Utilities.Abort_One_Task (Self_ID, C); C.Dependents_Aborted := True; end if; exit; end if; P := P.Common.Parent; end loop; C := C.Common.All_Tasks_Link; end loop; Self_ID.Dependents_Aborted := True; end Abort_Dependents; ----------------- -- Abort_Tasks -- ----------------- procedure Abort_Tasks (Tasks : Task_List) is begin Utilities.Abort_Tasks (Tasks); end Abort_Tasks; -------------------- -- Activate_Tasks -- -------------------- -- Note that locks of activator and activated task are both locked -- here. This is necessary because C.Common.State and -- Self.Common.Wait_Count have to be synchronized. This is safe from -- deadlock because the activator is always created before the activated -- task. That satisfies our in-order-of-creation ATCB locking policy. -- At one point, we may also lock the parent, if the parent is -- different from the activator. That is also consistent with the -- lock ordering policy, since the activator cannot be created -- before the parent. -- Since we are holding both the activator's lock, and Task_Wrapper -- locks that before it does anything more than initialize the -- low-level ATCB components, it should be safe to wait to update -- the counts until we see that the thread creation is successful. -- If the thread creation fails, we do need to close the entries -- of the task. The first phase, of dequeuing calls, only requires -- locking the acceptor's ATCB, but the waking up of the callers -- requires locking the caller's ATCB. We cannot safely do this -- while we are holding other locks. Therefore, the queue-clearing -- operation is done in a separate pass over the activation chain. procedure Activate_Tasks (Chain_Access : Activation_Chain_Access) is Self_ID : constant Task_Id := STPO.Self; P : Task_Id; C : Task_Id; Next_C, Last_C : Task_Id; Activate_Prio : System.Any_Priority; Success : Boolean; All_Elaborated : Boolean := True; begin -- If pragma Detect_Blocking is active, then we must check whether this -- potentially blocking operation is called from a protected action. if System.Tasking.Detect_Blocking and then Self_ID.Common.Protected_Action_Nesting > 0 then Ada.Exceptions.Raise_Exception (Program_Error'Identity, "potentially blocking operation"); end if; pragma Debug (Debug.Trace (Self_ID, "Activate_Tasks", 'C')); Initialization.Defer_Abort_Nestable (Self_ID); pragma Assert (Self_ID.Common.Wait_Count = 0); -- Lock RTS_Lock, to prevent activated tasks from racing ahead before -- we finish activating the chain. Lock_RTS; -- Check that all task bodies have been elaborated C := Chain_Access.T_ID; Last_C := null; while C /= null loop if C.Common.Elaborated /= null and then not C.Common.Elaborated.all then All_Elaborated := False; end if; -- Reverse the activation chain so that tasks are -- activated in the same order they're declared. Next_C := C.Common.Activation_Link; C.Common.Activation_Link := Last_C; Last_C := C; C := Next_C; end loop; Chain_Access.T_ID := Last_C; if not All_Elaborated then Unlock_RTS; Initialization.Undefer_Abort_Nestable (Self_ID); Raise_Exception (Program_Error'Identity, "Some tasks have not been elaborated"); end if; -- Activate all the tasks in the chain. Creation of the thread of -- control was deferred until activation. So create it now. C := Chain_Access.T_ID; while C /= null loop if C.Common.State /= Terminated then pragma Assert (C.Common.State = Unactivated); P := C.Common.Parent; Write_Lock (P); Write_Lock (C); if C.Common.Base_Priority < Get_Priority (Self_ID) then Activate_Prio := Get_Priority (Self_ID); else Activate_Prio := C.Common.Base_Priority; end if; System.Task_Primitives.Operations.Create_Task (C, Task_Wrapper'Address, Parameters.Size_Type (C.Common.Compiler_Data.Pri_Stack_Info.Size), Activate_Prio, Success); -- There would be a race between the created task and the -- creator to do the following initialization, if we did not -- have a Lock/Unlock_RTS pair in the task wrapper to prevent -- it from racing ahead. if Success then C.Common.State := Runnable; C.Awake_Count := 1; C.Alive_Count := 1; P.Awake_Count := P.Awake_Count + 1; P.Alive_Count := P.Alive_Count + 1; if P.Common.State = Master_Completion_Sleep and then C.Master_of_Task = P.Master_Within then pragma Assert (Self_ID /= P); P.Common.Wait_Count := P.Common.Wait_Count + 1; end if; Unlock (C); Unlock (P); else -- No need to set Awake_Count, State, etc. here since the loop -- below will do that for any Unactivated tasks. Unlock (C); Unlock (P); Self_ID.Common.Activation_Failed := True; end if; end if; C := C.Common.Activation_Link; end loop; if not Single_Lock then Unlock_RTS; end if; -- Close the entries of any tasks that failed thread creation, -- and count those that have not finished activation. Write_Lock (Self_ID); Self_ID.Common.State := Activator_Sleep; C := Chain_Access.T_ID; while C /= null loop Write_Lock (C); if C.Common.State = Unactivated then C.Common.Activator := null; C.Common.State := Terminated; C.Callable := False; Utilities.Cancel_Queued_Entry_Calls (C); elsif C.Common.Activator /= null then Self_ID.Common.Wait_Count := Self_ID.Common.Wait_Count + 1; end if; Unlock (C); P := C.Common.Activation_Link; C.Common.Activation_Link := null; C := P; end loop; -- Wait for the activated tasks to complete activation. It is -- unsafe to abort any of these tasks until the count goes to zero. loop Initialization.Poll_Base_Priority_Change (Self_ID); exit when Self_ID.Common.Wait_Count = 0; Sleep (Self_ID, Activator_Sleep); end loop; Self_ID.Common.State := Runnable; Unlock (Self_ID); if Single_Lock then Unlock_RTS; end if; -- Remove the tasks from the chain Chain_Access.T_ID := null; Initialization.Undefer_Abort_Nestable (Self_ID); if Self_ID.Common.Activation_Failed then Self_ID.Common.Activation_Failed := False; Raise_Exception (Tasking_Error'Identity, "Failure during activation"); end if; end Activate_Tasks; ------------------------- -- Complete_Activation -- ------------------------- procedure Complete_Activation is Self_ID : constant Task_Id := STPO.Self; begin Initialization.Defer_Abort_Nestable (Self_ID); if Single_Lock then Lock_RTS; end if; Vulnerable_Complete_Activation (Self_ID); if Single_Lock then Unlock_RTS; end if; Initialization.Undefer_Abort_Nestable (Self_ID); -- ??? -- Why do we need to allow for nested deferral here? if Runtime_Traces then Send_Trace_Info (T_Activate); end if; end Complete_Activation; --------------------- -- Complete_Master -- --------------------- procedure Complete_Master is Self_ID : constant Task_Id := STPO.Self; begin pragma Assert (Self_ID.Deferral_Level > 0); Vulnerable_Complete_Master (Self_ID); end Complete_Master; ------------------- -- Complete_Task -- ------------------- -- See comments on Vulnerable_Complete_Task for details procedure Complete_Task is Self_ID : constant Task_Id := STPO.Self; begin pragma Assert (Self_ID.Deferral_Level > 0); Vulnerable_Complete_Task (Self_ID); -- All of our dependents have terminated. Never undefer abort again! end Complete_Task; ----------------- -- Create_Task -- ----------------- -- Compiler interface only. Do not call from within the RTS. -- This must be called to create a new task. procedure Create_Task (Priority : Integer; Size : System.Parameters.Size_Type; Task_Info : System.Task_Info.Task_Info_Type; Num_Entries : Task_Entry_Index; Master : Master_Level; State : Task_Procedure_Access; Discriminants : System.Address; Elaborated : Access_Boolean; Chain : in out Activation_Chain; Task_Image : String; Created_Task : out Task_Id) is T, P : Task_Id; Self_ID : constant Task_Id := STPO.Self; Success : Boolean; Base_Priority : System.Any_Priority; Len : Natural; begin -- If pragma Detect_Blocking is active must be checked whether -- this potentially blocking operation is called from a -- protected action. if System.Tasking.Detect_Blocking and then Self_ID.Common.Protected_Action_Nesting > 0 then Ada.Exceptions.Raise_Exception (Program_Error'Identity, "potentially blocking operation"); end if; pragma Debug (Debug.Trace (Self_ID, "Create_Task", 'C')); if Priority = Unspecified_Priority then Base_Priority := Self_ID.Common.Base_Priority; else Base_Priority := System.Any_Priority (Priority); end if; -- Find parent P of new Task, via master level number P := Self_ID; if P /= null then while P.Master_of_Task >= Master loop P := P.Common.Parent; exit when P = null; end loop; end if; Initialization.Defer_Abort_Nestable (Self_ID); begin T := New_ATCB (Num_Entries); exception when others => Initialization.Undefer_Abort_Nestable (Self_ID); Raise_Exception (Storage_Error'Identity, "Cannot allocate task"); end; -- RTS_Lock is used by Abort_Dependents and Abort_Tasks. -- Up to this point, it is possible that we may be part of -- a family of tasks that is being aborted. Lock_RTS; Write_Lock (Self_ID); -- Now, we must check that we have not been aborted. -- If so, we should give up on creating this task, -- and simply return. if not Self_ID.Callable then pragma Assert (Self_ID.Pending_ATC_Level = 0); pragma Assert (Self_ID.Pending_Action); pragma Assert (Chain.T_ID = null or else Chain.T_ID.Common.State = Unactivated); Unlock (Self_ID); Unlock_RTS; Initialization.Undefer_Abort_Nestable (Self_ID); -- ??? Should never get here pragma Assert (False); raise Standard'Abort_Signal; end if; Initialize_ATCB (Self_ID, State, Discriminants, P, Elaborated, Base_Priority, Task_Info, Size, T, Success); if not Success then Free (T); Unlock (Self_ID); Unlock_RTS; Initialization.Undefer_Abort_Nestable (Self_ID); Raise_Exception (Storage_Error'Identity, "Failed to initialize task"); end if; T.Master_of_Task := Master; T.Master_Within := T.Master_of_Task + 1; for L in T.Entry_Calls'Range loop T.Entry_Calls (L).Self := T; T.Entry_Calls (L).Level := L; end loop; if Task_Image'Length = 0 then T.Common.Task_Image_Len := 0; else Len := 1; T.Common.Task_Image (1) := Task_Image (Task_Image'First); -- Remove unwanted blank space generated by 'Image for J in Task_Image'First + 1 .. Task_Image'Last loop if Task_Image (J) /= ' ' or else Task_Image (J - 1) /= '(' then Len := Len + 1; T.Common.Task_Image (Len) := Task_Image (J); exit when Len = T.Common.Task_Image'Last; end if; end loop; T.Common.Task_Image_Len := Len; end if; Unlock (Self_ID); Unlock_RTS; -- Create TSD as early as possible in the creation of a task, since it -- may be used by the operation of Ada code within the task. SSL.Create_TSD (T.Common.Compiler_Data); T.Common.Activation_Link := Chain.T_ID; Chain.T_ID := T; Initialization.Initialize_Attributes_Link.all (T); Created_Task := T; Initialization.Undefer_Abort_Nestable (Self_ID); if Runtime_Traces then Send_Trace_Info (T_Create, T); end if; end Create_Task; -------------------- -- Current_Master -- -------------------- function Current_Master return Master_Level is begin return STPO.Self.Master_Within; end Current_Master; ------------------ -- Enter_Master -- ------------------ procedure Enter_Master is Self_ID : constant Task_Id := STPO.Self; begin Self_ID.Master_Within := Self_ID.Master_Within + 1; end Enter_Master; ------------------------------- -- Expunge_Unactivated_Tasks -- ------------------------------- -- See procedure Close_Entries for the general case procedure Expunge_Unactivated_Tasks (Chain : in out Activation_Chain) is Self_ID : constant Task_Id := STPO.Self; C : Task_Id; Call : Entry_Call_Link; Temp : Task_Id; begin pragma Debug (Debug.Trace (Self_ID, "Expunge_Unactivated_Tasks", 'C')); Initialization.Defer_Abort_Nestable (Self_ID); -- ??? -- Experimentation has shown that abort is sometimes (but not -- always) already deferred when this is called. -- That may indicate an error. Find out what is going on C := Chain.T_ID; while C /= null loop pragma Assert (C.Common.State = Unactivated); Temp := C.Common.Activation_Link; if C.Common.State = Unactivated then Lock_RTS; Write_Lock (C); for J in 1 .. C.Entry_Num loop Queuing.Dequeue_Head (C.Entry_Queues (J), Call); pragma Assert (Call = null); end loop; Unlock (C); Initialization.Remove_From_All_Tasks_List (C); Unlock_RTS; Vulnerable_Free_Task (C); C := Temp; end if; end loop; Chain.T_ID := null; Initialization.Undefer_Abort_Nestable (Self_ID); end Expunge_Unactivated_Tasks; --------------------------- -- Finalize_Global_Tasks -- --------------------------- -- ??? -- We have a potential problem here if finalization of global -- objects does anything with signals or the timer server, since -- by that time those servers have terminated. -- It is hard to see how that would occur -- However, a better solution might be to do all this finalization -- using the global finalization chain. procedure Finalize_Global_Tasks is Self_ID : constant Task_Id := STPO.Self; Ignore : Boolean; begin if Self_ID.Deferral_Level = 0 then -- ??? -- In principle, we should be able to predict whether -- abort is already deferred here (and it should not be deferred -- yet but in practice it seems Finalize_Global_Tasks is being -- called sometimes, from RTS code for exceptions, with abort already -- deferred. Initialization.Defer_Abort_Nestable (Self_ID); -- Never undefer again!!! end if; -- This code is only executed by the environment task pragma Assert (Self_ID = Environment_Task); -- Set Environment_Task'Callable to false to notify library-level tasks -- that it is waiting for them (cf 5619-003). Self_ID.Callable := False; -- Exit level 2 master, for normal tasks in library-level packages Complete_Master; -- Force termination of "independent" library-level server tasks Lock_RTS; Abort_Dependents (Self_ID); if not Single_Lock then Unlock_RTS; end if; -- We need to explicitely wait for the task to be terminated here -- because on true concurrent system, we may end this procedure -- before the tasks are really terminated. Write_Lock (Self_ID); loop exit when Utilities.Independent_Task_Count = 0; -- We used to yield here, but this did not take into account -- low priority tasks that would cause dead lock in some cases. -- See 8126-020. Timed_Sleep (Self_ID, 0.01, System.OS_Primitives.Relative, Self_ID.Common.State, Ignore, Ignore); end loop; -- ??? On multi-processor environments, it seems that the above loop -- isn't sufficient, so we need to add an additional delay. Timed_Sleep (Self_ID, 0.01, System.OS_Primitives.Relative, Self_ID.Common.State, Ignore, Ignore); Unlock (Self_ID); if Single_Lock then Unlock_RTS; end if; -- Complete the environment task Vulnerable_Complete_Task (Self_ID); -- Handle normal task termination by the environment task, but only -- for the normal task termination. In the case of Abnormal and -- Unhandled_Exception they must have been handled before, and the -- task termination soft link must have been changed so the task -- termination routine is not executed twice. SSL.Task_Termination_Handler.all (Ada.Exceptions.Null_Occurrence); -- Finalize the global list for controlled objects if needed SSL.Finalize_Global_List.all; -- Reset the soft links to non-tasking SSL.Abort_Defer := SSL.Abort_Defer_NT'Access; SSL.Abort_Undefer := SSL.Abort_Undefer_NT'Access; SSL.Lock_Task := SSL.Task_Lock_NT'Access; SSL.Unlock_Task := SSL.Task_Unlock_NT'Access; SSL.Get_Jmpbuf_Address := SSL.Get_Jmpbuf_Address_NT'Access; SSL.Set_Jmpbuf_Address := SSL.Set_Jmpbuf_Address_NT'Access; SSL.Get_Sec_Stack_Addr := SSL.Get_Sec_Stack_Addr_NT'Access; SSL.Set_Sec_Stack_Addr := SSL.Set_Sec_Stack_Addr_NT'Access; SSL.Check_Abort_Status := SSL.Check_Abort_Status_NT'Access; SSL.Get_Stack_Info := SSL.Get_Stack_Info_NT'Access; -- Don't bother trying to finalize Initialization.Global_Task_Lock -- and System.Task_Primitives.RTS_Lock. end Finalize_Global_Tasks; --------------- -- Free_Task -- --------------- procedure Free_Task (T : Task_Id) is Self_Id : constant Task_Id := Self; begin if T.Common.State = Terminated then -- It is not safe to call Abort_Defer or Write_Lock at this stage Initialization.Task_Lock (Self_Id); Lock_RTS; Initialization.Remove_From_All_Tasks_List (T); Unlock_RTS; Initialization.Task_Unlock (Self_Id); System.Task_Primitives.Operations.Finalize_TCB (T); -- If the task is not terminated, then we simply ignore the call. This -- happens when a user program attempts an unchecked deallocation on -- a non-terminated task. else null; end if; end Free_Task; ------------------ -- Task_Wrapper -- ------------------ -- The task wrapper is a procedure that is called first for each task -- task body, and which in turn calls the compiler-generated task body -- procedure. The wrapper's main job is to do initialization for the task. -- It also has some locally declared objects that server as per-task local -- data. Task finalization is done by Complete_Task, which is called from -- an at-end handler that the compiler generates. procedure Task_Wrapper (Self_ID : Task_Id) is use type System.Parameters.Size_Type; use type SSE.Storage_Offset; use System.Standard_Library; use System.Stack_Usage; Bottom_Of_Stack : aliased Integer; Secondary_Stack_Size : constant SSE.Storage_Offset := Self_ID.Common.Compiler_Data.Pri_Stack_Info.Size * SSE.Storage_Offset (Parameters.Sec_Stack_Ratio) / 100; Secondary_Stack : aliased SSE.Storage_Array (1 .. Secondary_Stack_Size); pragma Warnings (Off); Secondary_Stack_Address : System.Address := Secondary_Stack'Address; Small_Overflow_Guard : constant := 4 * 1024; Big_Overflow_Guard : constant := 16 * 1024; Small_Stack_Limit : constant := 64 * 1024; -- ??? These three values are experimental, and seems to work on most -- platforms. They still need to be analyzed further. Size : Natural := Natural (Self_ID.Common.Compiler_Data.Pri_Stack_Info.Size); pragma Warnings (On); -- Address of secondary stack. In the fixed secondary stack case, this -- value is not modified, causing a warning, hence the bracketing with -- Warnings (Off/On). SEH_Table : aliased SSE.Storage_Array (1 .. 8); -- Structured Exception Registration table (2 words) procedure Install_SEH_Handler (Addr : System.Address); pragma Import (C, Install_SEH_Handler, "__gnat_install_SEH_handler"); -- Install the SEH (Structured Exception Handling) handler Cause : Cause_Of_Termination := Normal; -- Indicates the reason why this task terminates. Normal corresponds to -- a task terminating due to completing the last statement of its body, -- or as a result of waiting on a terminate alternative. If the task -- terminates because it is being aborted then Cause will be set to -- Abnormal. If the task terminates because of an exception raised by -- the execution of its task body, then Cause is set to -- Unhandled_Exception. EO : Exception_Occurrence; -- If the task terminates because of an exception raised by the -- execution of its task body, then EO will contain the associated -- exception occurrence. Otherwise, it will contain Null_Occurrence. TH : Termination_Handler := null; -- Pointer to the protected procedure to be executed upon task -- termination. procedure Search_Fall_Back_Handler (ID : Task_Id); -- Procedure that searches recursively a fall-back handler through the -- master relationship. If the handler is found, its pointer is stored -- in TH. procedure Search_Fall_Back_Handler (ID : Task_Id) is begin -- If there is a fall back handler, store its pointer for later -- execution. if ID.Common.Fall_Back_Handler /= null then TH := ID.Common.Fall_Back_Handler; -- Otherwise look for a fall back handler in the parent elsif ID.Common.Parent /= null then Search_Fall_Back_Handler (ID.Common.Parent); -- Otherwise, do nothing else return; end if; end Search_Fall_Back_Handler; begin pragma Assert (Self_ID.Deferral_Level = 1); -- Assume a size of the stack taken at this stage if Size < Small_Stack_Limit then Size := Size - Small_Overflow_Guard; else Size := Size - Big_Overflow_Guard; end if; if not Parameters.Sec_Stack_Dynamic then Self_ID.Common.Compiler_Data.Sec_Stack_Addr := Secondary_Stack'Address; SST.SS_Init (Secondary_Stack_Address, Integer (Secondary_Stack'Last)); Size := Size - Natural (Secondary_Stack_Size); end if; if System.Stack_Usage.Is_Enabled then STPO.Lock_RTS; Initialize_Analyzer (Self_ID.Common.Analyzer, Self_ID.Common.Task_Image (1 .. Self_ID.Common.Task_Image_Len), Size, SSE.To_Integer (Bottom_Of_Stack'Address)); STPO.Unlock_RTS; Fill_Stack (Self_ID.Common.Analyzer); end if; -- Set the guard page at the bottom of the stack. The call to unprotect -- the page is done in Terminate_Task Stack_Guard (Self_ID, True); -- Initialize low-level TCB components, that cannot be initialized -- by the creator. Enter_Task sets Self_ID.Known_Tasks_Index and -- also Self_ID.LL.Thread Enter_Task (Self_ID); -- We setup the SEH (Structured Exception Handling) handler if supported -- on the target. Install_SEH_Handler (SEH_Table'Address); -- Initialize exception occurrence Save_Occurrence (EO, Ada.Exceptions.Null_Occurrence); -- We lock RTS_Lock to wait for activator to finish activating the rest -- of the chain, so that everyone in the chain comes out in priority -- order. -- This also protects the value of -- Self_ID.Common.Activator.Common.Wait_Count. Lock_RTS; Unlock_RTS; if not System.Restrictions.Abort_Allowed then -- If Abort is not allowed, reset the deferral level since it will -- not get changed by the generated code. Keeping a default value -- of one would prevent some operations (e.g. select or delay) to -- proceed successfully. Self_ID.Deferral_Level := 0; end if; begin -- We are separating the following portion of the code in order to -- place the exception handlers in a different block. In this way, -- we do not call Set_Jmpbuf_Address (which needs Self) before we -- set Self in Enter_Task -- Call the task body procedure -- The task body is called with abort still deferred. That -- eliminates a dangerous window, for which we had to patch-up in -- Terminate_Task. -- During the expansion of the task body, we insert an RTS-call -- to Abort_Undefer, at the first point where abort should be -- allowed. Self_ID.Common.Task_Entry_Point (Self_ID.Common.Task_Arg); Initialization.Defer_Abort_Nestable (Self_ID); exception -- We can't call Terminate_Task in the exception handlers below, -- since there may be (e.g. in the case of GCC exception handling) -- clean ups associated with the exception handler that need to -- access task specific data. -- Defer abort so that this task can't be aborted while exiting when Standard'Abort_Signal => Initialization.Defer_Abort_Nestable (Self_ID); -- Update the cause that motivated the task termination so that -- the appropriate information is passed to the task termination -- procedure. Task termination as a result of waiting on a -- terminate alternative is a normal termination, although it is -- implemented using the abort mechanisms. if Self_ID.Terminate_Alternative then Cause := Normal; else Cause := Abnormal; end if; when others => -- ??? Using an E : others here causes CD2C11A to fail on -- DEC Unix, see 7925-005. Initialization.Defer_Abort_Nestable (Self_ID); -- Perform the task specific exception tracing duty. We handle -- these outputs here and not in the common notification routine -- because we need access to tasking related data and we don't -- want to drag dependencies against tasking related units in the -- the common notification units. Additionally, no trace is ever -- triggered from the common routine for the Unhandled_Raise case -- in tasks, since an exception never appears unhandled in this -- context because of this handler. if Exception_Trace = Unhandled_Raise then Trace_Unhandled_Exception_In_Task (Self_ID); end if; -- Update the cause that motivated the task termination so that -- the appropriate information is passed to the task termination -- procedure, as well as the associated Exception_Occurrence. Cause := Unhandled_Exception; Save_Occurrence (EO, SSL.Get_Current_Excep.all.all); end; -- Look for a task termination handler. This code is for all tasks but -- the environment task. The task termination code for the environment -- task is executed by SSL.Task_Termination_Handler. if Single_Lock then Lock_RTS; end if; Write_Lock (Self_ID); if Self_ID.Common.Specific_Handler /= null then TH := Self_ID.Common.Specific_Handler; else -- Look for a fall-back handler following the master relationship -- for the task. Search_Fall_Back_Handler (Self_ID); end if; Unlock (Self_ID); if Single_Lock then Unlock_RTS; end if; -- Execute the task termination handler if we found it if TH /= null then TH.all (Cause, Self_ID, EO); end if; if System.Stack_Usage.Is_Enabled then Compute_Result (Self_ID.Common.Analyzer); Report_Result (Self_ID.Common.Analyzer); end if; Terminate_Task (Self_ID); end Task_Wrapper; -------------------- -- Terminate_Task -- -------------------- -- Before we allow the thread to exit, we must clean up. This is a -- a delicate job. We must wake up the task's master, who may immediately -- try to deallocate the ATCB out from under the current task WHILE IT IS -- STILL EXECUTING. -- To avoid this, the parent task must be blocked up to the latest -- statement executed. The trouble is that we have another step that we -- also want to postpone to the very end, i.e., calling SSL.Destroy_TSD. -- We have to postpone that until the end because compiler-generated code -- is likely to try to access that data at just about any point. -- We can't call Destroy_TSD while we are holding any other locks, because -- it locks Global_Task_Lock, and our deadlock prevention rules require -- that to be the outermost lock. Our first "solution" was to just lock -- Global_Task_Lock in addition to the other locks, and force the parent to -- also lock this lock between its wakeup and its freeing of the ATCB. See -- Complete_Task for the parent-side of the code that has the matching -- calls to Task_Lock and Task_Unlock. That was not really a solution, -- since the operation Task_Unlock continued to access the ATCB after -- unlocking, after which the parent was observed to race ahead, deallocate -- the ATCB, and then reallocate it to another task. The call to -- Undefer_Abortion in Task_Unlock by the "terminated" task was overwriting -- the data of the new task that reused the ATCB! To solve this problem, we -- introduced the new operation Final_Task_Unlock. procedure Terminate_Task (Self_ID : Task_Id) is Environment_Task : constant Task_Id := STPO.Environment_Task; Master_of_Task : Integer; begin Debug.Task_Termination_Hook; if Runtime_Traces then Send_Trace_Info (T_Terminate); end if; -- Since GCC cannot allocate stack chunks efficiently without reordering -- some of the allocations, we have to handle this unexpected situation -- here. We should normally never have to call Vulnerable_Complete_Task -- here. See 6602-003 for more details. if Self_ID.Common.Activator /= null then Vulnerable_Complete_Task (Self_ID); end if; Initialization.Task_Lock (Self_ID); if Single_Lock then Lock_RTS; end if; Master_of_Task := Self_ID.Master_of_Task; -- Check if the current task is an independent task If so, decrement -- the Independent_Task_Count value. if Master_of_Task = 2 then if Single_Lock then Utilities.Independent_Task_Count := Utilities.Independent_Task_Count - 1; else Write_Lock (Environment_Task); Utilities.Independent_Task_Count := Utilities.Independent_Task_Count - 1; Unlock (Environment_Task); end if; end if; -- Unprotect the guard page if needed Stack_Guard (Self_ID, False); Utilities.Make_Passive (Self_ID, Task_Completed => True); if Single_Lock then Unlock_RTS; end if; pragma Assert (Check_Exit (Self_ID)); SSL.Destroy_TSD (Self_ID.Common.Compiler_Data); Initialization.Final_Task_Unlock (Self_ID); -- WARNING: past this point, this thread must assume that the ATCB -- has been deallocated. It should not be accessed again. if Master_of_Task > 0 then STPO.Exit_Task; end if; end Terminate_Task; ---------------- -- Terminated -- ---------------- function Terminated (T : Task_Id) return Boolean is Self_ID : constant Task_Id := STPO.Self; Result : Boolean; begin Initialization.Defer_Abort_Nestable (Self_ID); if Single_Lock then Lock_RTS; end if; Write_Lock (T); Result := T.Common.State = Terminated; Unlock (T); if Single_Lock then Unlock_RTS; end if; Initialization.Undefer_Abort_Nestable (Self_ID); return Result; end Terminated; ---------------------------------------- -- Trace_Unhandled_Exception_In_Task -- ---------------------------------------- procedure Trace_Unhandled_Exception_In_Task (Self_Id : Task_Id) is procedure To_Stderr (S : String); pragma Import (Ada, To_Stderr, "__gnat_to_stderr"); use System.Soft_Links; use System.Standard_Library; function To_Address is new Unchecked_Conversion (Task_Id, System.Address); function Tailored_Exception_Information (E : Exception_Occurrence) return String; pragma Import (Ada, Tailored_Exception_Information, "__gnat_tailored_exception_information"); Excep : constant Exception_Occurrence_Access := SSL.Get_Current_Excep.all; begin -- This procedure is called by the task outermost handler in -- Task_Wrapper below, so only once the task stack has been fully -- unwound. The common notification routine has been called at the -- raise point already. To_Stderr ("task "); if Self_Id.Common.Task_Image_Len /= 0 then To_Stderr (Self_Id.Common.Task_Image (1 .. Self_Id.Common.Task_Image_Len)); To_Stderr ("_"); end if; To_Stderr (System.Address_Image (To_Address (Self_Id))); To_Stderr (" terminated by unhandled exception"); To_Stderr ((1 => ASCII.LF)); To_Stderr (Tailored_Exception_Information (Excep.all)); end Trace_Unhandled_Exception_In_Task; ------------------------------------ -- Vulnerable_Complete_Activation -- ------------------------------------ -- As in several other places, the locks of the activator and activated -- task are both locked here. This follows our deadlock prevention lock -- ordering policy, since the activated task must be created after the -- activator. procedure Vulnerable_Complete_Activation (Self_ID : Task_Id) is Activator : constant Task_Id := Self_ID.Common.Activator; begin pragma Debug (Debug.Trace (Self_ID, "V_Complete_Activation", 'C')); Write_Lock (Activator); Write_Lock (Self_ID); pragma Assert (Self_ID.Common.Activator /= null); -- Remove dangling reference to Activator, since a task may -- outlive its activator. Self_ID.Common.Activator := null; -- Wake up the activator, if it is waiting for a chain of tasks to -- activate, and we are the last in the chain to complete activation. if Activator.Common.State = Activator_Sleep then Activator.Common.Wait_Count := Activator.Common.Wait_Count - 1; if Activator.Common.Wait_Count = 0 then Wakeup (Activator, Activator_Sleep); end if; end if; -- The activator raises a Tasking_Error if any task it is activating -- is completed before the activation is done. However, if the reason -- for the task completion is an abort, we do not raise an exception. -- See RM 9.2(5). if not Self_ID.Callable and then Self_ID.Pending_ATC_Level /= 0 then Activator.Common.Activation_Failed := True; end if; Unlock (Self_ID); Unlock (Activator); -- After the activation, active priority should be the same -- as base priority. We must unlock the Activator first, -- though, since it should not wait if we have lower priority. if Get_Priority (Self_ID) /= Self_ID.Common.Base_Priority then Write_Lock (Self_ID); Set_Priority (Self_ID, Self_ID.Common.Base_Priority); Unlock (Self_ID); end if; end Vulnerable_Complete_Activation; -------------------------------- -- Vulnerable_Complete_Master -- -------------------------------- procedure Vulnerable_Complete_Master (Self_ID : Task_Id) is C : Task_Id; P : Task_Id; CM : constant Master_Level := Self_ID.Master_Within; T : aliased Task_Id; To_Be_Freed : Task_Id; -- This is a list of ATCBs to be freed, after we have released -- all RTS locks. This is necessary because of the locking order -- rules, since the storage manager uses Global_Task_Lock. pragma Warnings (Off); function Check_Unactivated_Tasks return Boolean; pragma Warnings (On); -- Temporary error-checking code below. This is part of the checks -- added in the new run time. Call it only inside a pragma Assert. ----------------------------- -- Check_Unactivated_Tasks -- ----------------------------- function Check_Unactivated_Tasks return Boolean is begin if not Single_Lock then Lock_RTS; end if; Write_Lock (Self_ID); C := All_Tasks_List; while C /= null loop if C.Common.Activator = Self_ID then return False; end if; if C.Common.Parent = Self_ID and then C.Master_of_Task = CM then Write_Lock (C); if C.Common.State = Unactivated then return False; end if; Unlock (C); end if; C := C.Common.All_Tasks_Link; end loop; Unlock (Self_ID); if not Single_Lock then Unlock_RTS; end if; return True; end Check_Unactivated_Tasks; -- Start of processing for Vulnerable_Complete_Master begin pragma Debug (Debug.Trace (Self_ID, "V_Complete_Master", 'C')); pragma Assert (Self_ID.Common.Wait_Count = 0); pragma Assert (Self_ID.Deferral_Level > 0); -- Count how many active dependent tasks this master currently -- has, and record this in Wait_Count. -- This count should start at zero, since it is initialized to -- zero for new tasks, and the task should not exit the -- sleep-loops that use this count until the count reaches zero. Lock_RTS; Write_Lock (Self_ID); C := All_Tasks_List; while C /= null loop if C.Common.Activator = Self_ID then pragma Assert (C.Common.State = Unactivated); Write_Lock (C); C.Common.Activator := null; C.Common.State := Terminated; C.Callable := False; Utilities.Cancel_Queued_Entry_Calls (C); Unlock (C); end if; if C.Common.Parent = Self_ID and then C.Master_of_Task = CM then Write_Lock (C); if C.Awake_Count /= 0 then Self_ID.Common.Wait_Count := Self_ID.Common.Wait_Count + 1; end if; Unlock (C); end if; C := C.Common.All_Tasks_Link; end loop; Self_ID.Common.State := Master_Completion_Sleep; Unlock (Self_ID); if not Single_Lock then Unlock_RTS; end if; -- Wait until dependent tasks are all terminated or ready to terminate. -- While waiting, the task may be awakened if the task's priority needs -- changing, or this master is aborted. In the latter case, we want -- to abort the dependents, and resume waiting until Wait_Count goes -- to zero. Write_Lock (Self_ID); loop Initialization.Poll_Base_Priority_Change (Self_ID); exit when Self_ID.Common.Wait_Count = 0; -- Here is a difference as compared to Complete_Master if Self_ID.Pending_ATC_Level < Self_ID.ATC_Nesting_Level and then not Self_ID.Dependents_Aborted then if Single_Lock then Abort_Dependents (Self_ID); else Unlock (Self_ID); Lock_RTS; Abort_Dependents (Self_ID); Unlock_RTS; Write_Lock (Self_ID); end if; else Sleep (Self_ID, Master_Completion_Sleep); end if; end loop; Self_ID.Common.State := Runnable; Unlock (Self_ID); -- Dependents are all terminated or on terminate alternatives. -- Now, force those on terminate alternatives to terminate, by -- aborting them. pragma Assert (Check_Unactivated_Tasks); if Self_ID.Alive_Count > 1 then -- ??? -- Consider finding a way to skip the following extra steps if there -- are no dependents with terminate alternatives. This could be done -- by adding another count to the ATCB, similar to Awake_Count, but -- keeping track of tasks that are on terminate alternatives. pragma Assert (Self_ID.Common.Wait_Count = 0); -- Force any remaining dependents to terminate by aborting them if not Single_Lock then Lock_RTS; end if; Abort_Dependents (Self_ID); -- Above, when we "abort" the dependents we are simply using this -- operation for convenience. We are not required to support the full -- abort-statement semantics; in particular, we are not required to -- immediately cancel any queued or in-service entry calls. That is -- good, because if we tried to cancel a call we would need to lock -- the caller, in order to wake the caller up. Our anti-deadlock -- rules prevent us from doing that without releasing the locks on C -- and Self_ID. Releasing and retaking those locks would be wasteful -- at best, and should not be considered further without more -- detailed analysis of potential concurrent accesses to the -- ATCBs of C and Self_ID. -- Count how many "alive" dependent tasks this master currently -- has, and record this in Wait_Count. This count should start at -- zero, since it is initialized to zero for new tasks, and the -- task should not exit the sleep-loops that use this count until -- the count reaches zero. pragma Assert (Self_ID.Common.Wait_Count = 0); Write_Lock (Self_ID); C := All_Tasks_List; while C /= null loop if C.Common.Parent = Self_ID and then C.Master_of_Task = CM then Write_Lock (C); pragma Assert (C.Awake_Count = 0); if C.Alive_Count > 0 then pragma Assert (C.Terminate_Alternative); Self_ID.Common.Wait_Count := Self_ID.Common.Wait_Count + 1; end if; Unlock (C); end if; C := C.Common.All_Tasks_Link; end loop; Self_ID.Common.State := Master_Phase_2_Sleep; Unlock (Self_ID); if not Single_Lock then Unlock_RTS; end if; -- Wait for all counted tasks to finish terminating themselves Write_Lock (Self_ID); loop Initialization.Poll_Base_Priority_Change (Self_ID); exit when Self_ID.Common.Wait_Count = 0; Sleep (Self_ID, Master_Phase_2_Sleep); end loop; Self_ID.Common.State := Runnable; Unlock (Self_ID); end if; -- We don't wake up for abort here. We are already terminating just as -- fast as we can, so there is no point. -- Remove terminated tasks from the list of Self_ID's dependents, but -- don't free their ATCBs yet, because of lock order restrictions, -- which don't allow us to call "free" or "malloc" while holding any -- other locks. Instead, we put those ATCBs to be freed onto a -- temporary list, called To_Be_Freed. if not Single_Lock then Lock_RTS; end if; C := All_Tasks_List; P := null; while C /= null loop if C.Common.Parent = Self_ID and then C.Master_of_Task >= CM then if P /= null then P.Common.All_Tasks_Link := C.Common.All_Tasks_Link; else All_Tasks_List := C.Common.All_Tasks_Link; end if; T := C.Common.All_Tasks_Link; C.Common.All_Tasks_Link := To_Be_Freed; To_Be_Freed := C; C := T; else P := C; C := C.Common.All_Tasks_Link; end if; end loop; Unlock_RTS; -- Free all the ATCBs on the list To_Be_Freed -- The ATCBs in the list are no longer in All_Tasks_List, and after -- any interrupt entries are detached from them they should no longer -- be referenced. -- Global_Task_Lock (Task_Lock/Unlock) is locked in the loop below to -- avoid a race between a terminating task and its parent. The parent -- might try to deallocate the ACTB out from underneath the exiting -- task. Note that Free will also lock Global_Task_Lock, but that is -- OK, since this is the *one* lock for which we have a mechanism to -- support nested locking. See Task_Wrapper and its finalizer for more -- explanation. -- ??? -- The check "T.Common.Parent /= null ..." below is to prevent dangling -- references to terminated library-level tasks, which could -- otherwise occur during finalization of library-level objects. -- A better solution might be to hook task objects into the -- finalization chain and deallocate the ATCB when the task -- object is deallocated. However, this change is not likely -- to gain anything significant, since all this storage should -- be recovered en-masse when the process exits. while To_Be_Freed /= null loop T := To_Be_Freed; To_Be_Freed := T.Common.All_Tasks_Link; -- ??? On SGI there is currently no Interrupt_Manager, that's -- why we need to check if the Interrupt_Manager_ID is null if T.Interrupt_Entry and Interrupt_Manager_ID /= null then declare Detach_Interrupt_Entries_Index : constant Task_Entry_Index := 1; -- Corresponds to the entry index of System.Interrupts. -- Interrupt_Manager.Detach_Interrupt_Entries. -- Be sure to update this value when changing -- Interrupt_Manager specs. type Param_Type is access all Task_Id; Param : aliased Param_Type := T'Access; begin System.Tasking.Rendezvous.Call_Simple (Interrupt_Manager_ID, Detach_Interrupt_Entries_Index, Param'Address); end; end if; if (T.Common.Parent /= null and then T.Common.Parent.Common.Parent /= null) or else T.Master_of_Task > 3 then Initialization.Task_Lock (Self_ID); -- If Sec_Stack_Addr is not null, it means that Destroy_TSD -- has not been called yet (case of an unactivated task). if T.Common.Compiler_Data.Sec_Stack_Addr /= Null_Address then SSL.Destroy_TSD (T.Common.Compiler_Data); end if; Vulnerable_Free_Task (T); Initialization.Task_Unlock (Self_ID); end if; end loop; -- It might seem nice to let the terminated task deallocate its own -- ATCB. That would not cover the case of unactivated tasks. It also -- would force us to keep the underlying thread around past termination, -- since references to the ATCB are possible past termination. -- Currently, we get rid of the thread as soon as the task terminates, -- and let the parent recover the ATCB later. -- Some day, if we want to recover the ATCB earlier, at task -- termination, we could consider using "fat task IDs", that include the -- serial number with the ATCB pointer, to catch references to tasks -- that no longer have ATCBs. It is not clear how much this would gain, -- since the user-level task object would still be occupying storage. -- Make next master level up active. -- We don't need to lock the ATCB, since the value is only updated by -- each task for itself. Self_ID.Master_Within := CM - 1; end Vulnerable_Complete_Master; ------------------------------ -- Vulnerable_Complete_Task -- ------------------------------ -- Complete the calling task -- This procedure must be called with abort deferred. (That's why the -- name has "Vulnerable" in it.) It should only be called by Complete_Task -- and Finalize_Global_Tasks (for the environment task). -- The effect is similar to that of Complete_Master. Differences include -- the closing of entries here, and computation of the number of active -- dependent tasks in Complete_Master. -- We don't lock Self_ID before the call to Vulnerable_Complete_Activation, -- because that does its own locking, and because we do not need the lock -- to test Self_ID.Common.Activator. That value should only be read and -- modified by Self. procedure Vulnerable_Complete_Task (Self_ID : Task_Id) is begin pragma Assert (Self_ID.Deferral_Level > 0); pragma Assert (Self_ID = Self); pragma Assert (Self_ID.Master_Within = Self_ID.Master_of_Task + 1 or else Self_ID.Master_Within = Self_ID.Master_of_Task + 2); pragma Assert (Self_ID.Common.Wait_Count = 0); pragma Assert (Self_ID.Open_Accepts = null); pragma Assert (Self_ID.ATC_Nesting_Level = 1); pragma Debug (Debug.Trace (Self_ID, "V_Complete_Task", 'C')); if Single_Lock then Lock_RTS; end if; Write_Lock (Self_ID); Self_ID.Callable := False; -- In theory, Self should have no pending entry calls left on its -- call-stack. Each async. select statement should clean its own call, -- and blocking entry calls should defer abort until the calls are -- cancelled, then clean up. Utilities.Cancel_Queued_Entry_Calls (Self_ID); Unlock (Self_ID); if Self_ID.Common.Activator /= null then Vulnerable_Complete_Activation (Self_ID); end if; if Single_Lock then Unlock_RTS; end if; -- If Self_ID.Master_Within = Self_ID.Master_of_Task + 2 -- we may have dependent tasks for which we need to wait. -- Otherwise, we can just exit. if Self_ID.Master_Within = Self_ID.Master_of_Task + 2 then Vulnerable_Complete_Master (Self_ID); end if; end Vulnerable_Complete_Task; -------------------------- -- Vulnerable_Free_Task -- -------------------------- -- Recover all runtime system storage associated with the task T. -- This should only be called after T has terminated and will no -- longer be referenced. -- For tasks created by an allocator that fails, due to an exception, -- it is called from Expunge_Unactivated_Tasks. -- For tasks created by elaboration of task object declarations it -- is called from the finalization code of the Task_Wrapper procedure. -- It is also called from Unchecked_Deallocation, for objects that -- are or contain tasks. procedure Vulnerable_Free_Task (T : Task_Id) is begin pragma Debug (Debug.Trace (Self, "Vulnerable_Free_Task", 'C', T)); if Single_Lock then Lock_RTS; end if; Write_Lock (T); Initialization.Finalize_Attributes_Link.all (T); Unlock (T); if Single_Lock then Unlock_RTS; end if; System.Task_Primitives.Operations.Finalize_TCB (T); end Vulnerable_Free_Task; -- Package elaboration code begin -- Establish the Adafinal softlink -- This is not done inside the central RTS initialization routine -- to avoid with-ing this package from System.Tasking.Initialization. SSL.Adafinal := Finalize_Global_Tasks'Access; -- Establish soft links for subprograms that manipulate master_id's. -- This cannot be done when the RTS is initialized, because of various -- elaboration constraints. SSL.Current_Master := Stages.Current_Master'Access; SSL.Enter_Master := Stages.Enter_Master'Access; SSL.Complete_Master := Stages.Complete_Master'Access; end System.Tasking.Stages;