/* * Copyright (c) 2012-2013 Apple Inc. All rights reserved. * * @APPLE_APACHE_LICENSE_HEADER_START@ * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * @APPLE_APACHE_LICENSE_HEADER_END@ */ /* * IMPORTANT: This header file describes INTERNAL interfaces to libdispatch * which are subject to change in future releases of Mac OS X. Any applications * relying on these interfaces WILL break. */ #ifndef __DISPATCH_MACH_PRIVATE__ #define __DISPATCH_MACH_PRIVATE__ #ifndef __DISPATCH_INDIRECT__ #error "Please #include <dispatch/dispatch.h> instead of this file directly." #include <dispatch/base.h> // for HeaderDoc #endif __BEGIN_DECLS #if DISPATCH_MACH_SPI #define DISPATCH_MACH_SPI_VERSION 20161026 #include <mach/mach.h> DISPATCH_ASSUME_NONNULL_BEGIN /*! * @functiongroup Dispatch Mach Channel SPI * * IMPORTANT: This is Libsystem-internal SPI not intended for general use and * is subject to change at any time without warning. */ /*! * @typedef dispatch_mach_t * A dispatch mach channel asynchronously recevives and sends mach messages. */ DISPATCH_DECL(dispatch_mach); /*! * @typedef dispatch_mach_reason_t * Reasons for a mach channel handler to be invoked, or the result of an * immediate send attempt. * * @const DISPATCH_MACH_CONNECTED * The channel has been connected. The first handler invocation on a channel * after calling dispatch_mach_connect() will have this reason. * * @const DISPATCH_MACH_MESSAGE_RECEIVED * A message was received, it is passed in the message parameter. * * @const DISPATCH_MACH_MESSAGE_SENT * A message was sent, it is passed in the message parameter (so that associated * resources can be disposed of). * * @const DISPATCH_MACH_MESSAGE_SEND_FAILED * A message failed to be sent, it is passed in the message parameter (so that * associated resources can be disposed of), along with the error code from * mach_msg(). * * @const DISPATCH_MACH_MESSAGE_NOT_SENT * A message was not sent due to the channel being canceled or reconnected, it * is passed in the message parameter (so that associated resources can be * disposed of). * * @const DISPATCH_MACH_BARRIER_COMPLETED * A barrier block has finished executing. * * @const DISPATCH_MACH_DISCONNECTED * The channel has been disconnected by a call to dispatch_mach_reconnect() or * dispatch_mach_cancel(), an empty message is passed in the message parameter * (so that associated port rights can be disposed of). * The message header will contain either a remote port with a previously * connected send right, or a local port with a previously connected receive * right (if the channel was canceled), or a local port with a receive right * that was being monitored for a direct reply to a message previously sent to * the channel (if no reply was received). * * @const DISPATCH_MACH_CANCELED * The channel has been canceled. * * @const DISPATCH_MACH_REPLY_RECEIVED * A synchronous reply to a call to dispatch_mach_send_and_wait_for_reply() has * been received on another thread, an empty message is passed in the message * parameter (so that associated port rights can be disposed of). * The message header will contain a local port with a receive right associated * with the reply to the message that was synchronously sent to the channel. * * @const DISPATCH_MACH_NEEDS_DEFERRED_SEND * The message could not be sent synchronously. Only returned from a send with * result operation and never passed to a channel handler. Indicates that the * message passed to the send operation must not be disposed of until it is * returned via the channel handler. * * @const DISPATCH_MACH_SIGTERM_RECEIVED * A SIGTERM signal has been received. This notification is delivered at most * once during the lifetime of the channel. This event is sent only for XPC * channels (i.e. channels that were created by calling * dispatch_mach_create_4libxpc()) and only if the * dmxh_enable_sigterm_notification function in the XPC hooks structure is not * set or it returned true when it was called at channel activation time. * * @const DISPATCH_MACH_ASYNC_WAITER_DISCONNECTED * The channel has been disconnected by a call to dispatch_mach_reconnect() or * dispatch_mach_cancel(), an empty message is passed in the message parameter * (so that associated port rights can be disposed of). The message header will * contain a local port with the receive right previously allocated to receive * an asynchronous reply to a message previously sent to the channel. Used * only if the channel is disconnected while waiting for a reply to a message * sent with dispatch_mach_send_with_result_and_async_reply_4libxpc(). */ DISPATCH_ENUM(dispatch_mach_reason, unsigned long, DISPATCH_MACH_CONNECTED = 1, DISPATCH_MACH_MESSAGE_RECEIVED, DISPATCH_MACH_MESSAGE_SENT, DISPATCH_MACH_MESSAGE_SEND_FAILED, DISPATCH_MACH_MESSAGE_NOT_SENT, DISPATCH_MACH_BARRIER_COMPLETED, DISPATCH_MACH_DISCONNECTED, DISPATCH_MACH_CANCELED, DISPATCH_MACH_REPLY_RECEIVED, DISPATCH_MACH_NEEDS_DEFERRED_SEND, DISPATCH_MACH_SIGTERM_RECEIVED, DISPATCH_MACH_ASYNC_WAITER_DISCONNECTED, DISPATCH_MACH_REASON_LAST, /* unused */ ); /*! * @typedef dispatch_mach_send_flags_t * Flags that can be passed to the *with_flags send functions. */ DISPATCH_ENUM(dispatch_mach_send_flags, unsigned long, DISPATCH_MACH_SEND_DEFAULT = 0, ); /*! * @typedef dispatch_mach_trailer_t * Trailer type of mach message received by dispatch mach channels */ typedef mach_msg_context_trailer_t dispatch_mach_trailer_t; /*! * @constant DISPATCH_MACH_RECEIVE_MAX_INLINE_MESSAGE_SIZE * Maximum size of a message that can be received inline by a dispatch mach * channel, reception of larger messages requires an extra roundtrip through * the kernel. */ #define DISPATCH_MACH_RECEIVE_MAX_INLINE_MESSAGE_SIZE \ (0x4000 - sizeof(dispatch_mach_trailer_t)) /*! * @typedef dispatch_mach_msg_t * A dispatch mach message encapsulates messages received or sent with dispatch * mach channels. */ DISPATCH_DECL(dispatch_mach_msg); /*! * @typedef dispatch_mach_msg_destructor_t * Dispatch mach message object destructors. * * @const DISPATCH_MACH_MSG_DESTRUCTOR_DEFAULT * Message buffer storage is internal to the object, if a buffer is supplied * during object creation, its contents are copied. * * @const DISPATCH_MACH_MSG_DESTRUCTOR_FREE * Message buffer will be deallocated with free(3). * * @const DISPATCH_MACH_MSG_DESTRUCTOR_FREE * Message buffer will be deallocated with vm_deallocate. */ DISPATCH_ENUM(dispatch_mach_msg_destructor, unsigned int, DISPATCH_MACH_MSG_DESTRUCTOR_DEFAULT = 0, DISPATCH_MACH_MSG_DESTRUCTOR_FREE, DISPATCH_MACH_MSG_DESTRUCTOR_VM_DEALLOCATE, ); /*! * @function dispatch_mach_msg_create * Creates a dispatch mach message object, either with a newly allocated message * buffer of given size, or from an existing message buffer that will be * deallocated with the specified destructor when the object is released. * * If a non-NULL reference to a pointer is provided in 'msg_ptr', it is filled * with the location of the (possibly newly allocated) message buffer. * * It is the responsibility of the application to ensure that it does not modify * the underlying message buffer once the dispatch mach message object is passed * to other dispatch mach API. * * @param msg The message buffer to create the message object from. * If 'destructor' is DISPATCH_MACH_MSG_DESTRUCTOR_DEFAULT, * this argument may be NULL to leave the newly allocated * message buffer zero-initialized. * @param size The size of the message buffer. * Must be >= sizeof(mach_msg_header_t) * @param destructor The destructor to use to deallocate the message buffer * when the object is released. * @param msg_ptr A pointer to a pointer variable to be filled with the * location of the (possibly newly allocated) message * buffer, or NULL. * @result A newly created dispatch mach message object. */ API_AVAILABLE(macos(10.9), ios(7.0)) DISPATCH_EXPORT DISPATCH_MALLOC DISPATCH_RETURNS_RETAINED DISPATCH_WARN_RESULT DISPATCH_NOTHROW dispatch_mach_msg_t dispatch_mach_msg_create(mach_msg_header_t *_Nullable msg, size_t size, dispatch_mach_msg_destructor_t destructor, mach_msg_header_t *_Nonnull *_Nullable msg_ptr); /*! * @function dispatch_mach_msg_get_msg * Returns the message buffer underlying a dispatch mach message object. * * @param message The dispatch mach message object to query. * @param size_ptr A pointer to a size_t variable to be filled with the * size of the message buffer, or NULL. * @result Pointer to message buffer underlying the object. */ API_AVAILABLE(macos(10.9), ios(7.0)) DISPATCH_EXPORT DISPATCH_NONNULL1 DISPATCH_NOTHROW mach_msg_header_t* dispatch_mach_msg_get_msg(dispatch_mach_msg_t message, size_t *_Nullable size_ptr); #ifdef __BLOCKS__ /*! * @typedef dispatch_mach_handler_t * Prototype of dispatch mach channel handler blocks. * * @param reason Reason the handler was invoked. * @param message Message object that was sent or received. * @param error Mach error code for the send operation. */ typedef void (^dispatch_mach_handler_t)(dispatch_mach_reason_t reason, dispatch_mach_msg_t _Nullable message, mach_error_t error); /*! * @function dispatch_mach_create * Create a dispatch mach channel to asynchronously receive and send mach * messages. * * The specified handler will be called with the corresponding reason parameter * for each message received and for each message that was successfully sent, * that failed to be sent, or was not sent; as well as when a barrier block * has completed, or when channel connection, reconnection or cancellation has * taken effect. * * Dispatch mach channels are created in a disconnected state, they must be * connected via dispatch_mach_connect() to begin receiving and sending * messages. * * @param label * An optional string label to attach to the channel. The string is not copied, * if it is non-NULL it must point to storage that remains valid for the * lifetime of the channel object. May be NULL. * * @param queue * The target queue of the channel, where the handler and barrier blocks will * be submitted. * * @param handler * The handler block to submit when a message has been sent or received. * * @result * The newly created dispatch mach channel. */ API_AVAILABLE(macos(10.9), ios(6.0)) DISPATCH_EXPORT DISPATCH_MALLOC DISPATCH_RETURNS_RETAINED DISPATCH_WARN_RESULT DISPATCH_NONNULL3 DISPATCH_NOTHROW dispatch_mach_t dispatch_mach_create(const char *_Nullable label, dispatch_queue_t _Nullable queue, dispatch_mach_handler_t handler); #endif /*! * @typedef dispatch_mach_handler_function_t * Prototype of dispatch mach channel handler functions. * * @param context Application-defined context parameter. * @param reason Reason the handler was invoked. * @param message Message object that was sent or received. * @param error Mach error code for the send operation. */ typedef void (*dispatch_mach_handler_function_t)(void *_Nullable context, dispatch_mach_reason_t reason, dispatch_mach_msg_t _Nullable message, mach_error_t error); /*! * @function dispatch_mach_create_f * Create a dispatch mach channel to asynchronously receive and send mach * messages. * * The specified handler will be called with the corresponding reason parameter * for each message received and for each message that was successfully sent, * that failed to be sent, or was not sent; as well as when a barrier block * has completed, or when channel connection, reconnection or cancellation has * taken effect. * * Dispatch mach channels are created in a disconnected state, they must be * connected via dispatch_mach_connect() to begin receiving and sending * messages. * * @param label * An optional string label to attach to the channel. The string is not copied, * if it is non-NULL it must point to storage that remains valid for the * lifetime of the channel object. May be NULL. * * @param queue * The target queue of the channel, where the handler and barrier blocks will * be submitted. * * @param context * The application-defined context to pass to the handler. * * @param handler * The handler function to submit when a message has been sent or received. * * @result * The newly created dispatch mach channel. */ API_AVAILABLE(macos(10.9), ios(6.0)) DISPATCH_EXPORT DISPATCH_MALLOC DISPATCH_RETURNS_RETAINED DISPATCH_WARN_RESULT DISPATCH_NONNULL4 DISPATCH_NOTHROW dispatch_mach_t dispatch_mach_create_f(const char *_Nullable label, dispatch_queue_t _Nullable queue, void *_Nullable context, dispatch_mach_handler_function_t handler); /*! * @function dispatch_mach_connect * Connect a mach channel to the specified receive and send rights. * * This function must only be called once during the lifetime of a channel, it * will initiate message reception and perform any already submitted message * sends or barrier operations. * * @param channel * The mach channel to connect. * * @param receive * The receive right to associate with the channel. May be MACH_PORT_NULL. * * @param send * The send right to associate with the channel. May be MACH_PORT_NULL. * * @param checkin * An optional message object encapsulating the initial check-in message to send * upon channel connection. The check-in message is sent immediately before the * first message submitted via dispatch_mach_send(). The message object will be * retained until the initial send operation is complete (or not peformed due * to channel cancellation or reconnection) and the channel handler has * returned. May be NULL. */ API_AVAILABLE(macos(10.9), ios(6.0)) DISPATCH_EXPORT DISPATCH_NONNULL1 DISPATCH_NOTHROW void dispatch_mach_connect(dispatch_mach_t channel, mach_port_t receive, mach_port_t send, dispatch_mach_msg_t _Nullable checkin); /*! * @function dispatch_mach_reconnect * Reconnect a mach channel to the specified send right. * * Disconnects the channel from the current send right, interrupts any pending * message sends (and returns the messages as unsent), and reconnects the * channel to a new send right. * * The application must wait for the channel handler to be invoked with * DISPATCH_MACH_DISCONNECTED before releasing the previous send right. * * @param channel * The mach channel to reconnect. * * @param send * The new send right to associate with the channel. May be MACH_PORT_NULL. * * @param checkin * An optional message object encapsulating the initial check-in message to send * upon channel reconnection. The check-in message is sent immediately before * the first message submitted via dispatch_mach_send() after this function * returns. The message object will be retained until the initial send operation * is complete (or not peformed due to channel cancellation or reconnection) * and the channel handler has returned. May be NULL. */ API_AVAILABLE(macos(10.9), ios(6.0)) DISPATCH_EXPORT DISPATCH_NONNULL1 DISPATCH_NOTHROW void dispatch_mach_reconnect(dispatch_mach_t channel, mach_port_t send, dispatch_mach_msg_t _Nullable checkin); /*! * @function dispatch_mach_cancel * Cancel a mach channel, preventing any further messages from being sent or * received. * * The application must wait for the channel handler to be invoked with * DISPATCH_MACH_DISCONNECTED before releasing the underlying send and receive * rights. * * Note: explicit cancellation of mach channels is required, no implicit * cancellation takes place on release of the last application reference * to the channel object. Failure to cancel will cause the channel and * its associated resources to be leaked. * * @param channel * The mach channel to cancel. */ API_AVAILABLE(macos(10.9), ios(6.0)) DISPATCH_EXPORT DISPATCH_NONNULL_ALL DISPATCH_NOTHROW void dispatch_mach_cancel(dispatch_mach_t channel); /*! * @function dispatch_mach_send * Asynchronously send a message encapsulated in a dispatch mach message object * to the specified mach channel. * * Unless the message is being sent to a send-once right (as determined by the * presence of MACH_MSG_TYPE_MOVE_SEND_ONCE in the message header remote bits), * the message header remote port is set to the channel send right before the * send operation is performed. * * If the message expects a direct reply (as determined by the presence of * MACH_MSG_TYPE_MAKE_SEND_ONCE in the message header local bits) the receive * right specified in the message header local port will be monitored until a * reply message (or a send-once notification) is received, or the channel is * canceled. Hence the application must wait for the channel handler to be * invoked with a DISPATCH_MACH_DISCONNECTED message before releasing that * receive right. * * If the message send operation is attempted but the channel is canceled * before the send operation succesfully completes, the message returned to the * channel handler with DISPATCH_MACH_MESSAGE_NOT_SENT may be the result of a * pseudo-receive operation. If the message expected a direct reply, the * receive right originally specified in the message header local port will * returned in a DISPATCH_MACH_DISCONNECTED message. * * @param channel * The mach channel to which to send the message. * * @param message * The message object encapsulating the message to send. The object will be * retained until the send operation is complete and the channel handler has * returned. The storage underlying the message object may be modified by the * send operation. * * @param options * Additional send options to pass to mach_msg() when performing the send * operation. */ API_AVAILABLE(macos(10.9), ios(6.0)) DISPATCH_EXPORT DISPATCH_NONNULL1 DISPATCH_NONNULL2 DISPATCH_NOTHROW void dispatch_mach_send(dispatch_mach_t channel, dispatch_mach_msg_t message, mach_msg_option_t options); /*! * @function dispatch_mach_send_with_result * Asynchronously send a message encapsulated in a dispatch mach message object * to the specified mach channel. If an immediate send can be performed, return * its result via out parameters. * * Unless the message is being sent to a send-once right (as determined by the * presence of MACH_MSG_TYPE_MOVE_SEND_ONCE in the message header remote bits), * the message header remote port is set to the channel send right before the * send operation is performed. * * If the message expects a direct reply (as determined by the presence of * MACH_MSG_TYPE_MAKE_SEND_ONCE in the message header local bits) the receive * right specified in the message header local port will be monitored until a * reply message (or a send-once notification) is received, or the channel is * canceled. Hence the application must wait for the channel handler to be * invoked with a DISPATCH_MACH_DISCONNECTED message before releasing that * receive right. * * If the message send operation is attempted but the channel is canceled * before the send operation succesfully completes, the message returned to the * channel handler with DISPATCH_MACH_MESSAGE_NOT_SENT may be the result of a * pseudo-receive operation. If the message expected a direct reply, the * receive right originally specified in the message header local port will * returned in a DISPATCH_MACH_DISCONNECTED message. * * If an immediate send could be performed, returns the resulting reason * (e.g. DISPATCH_MACH_MESSAGE_SENT) and possible error to the caller in the * send_result and send_error out parameters (instead of via the channel * handler), in which case the passed-in message and associated resources * can be disposed of synchronously. * * If a deferred send is required, returns DISPATCH_MACH_NEEDS_DEFERRED_SEND * in the send_result out parameter to indicate that the passed-in message has * been retained and associated resources must not be disposed of until the * message is returned asynchronusly via the channel handler. * * @param channel * The mach channel to which to send the message. * * @param message * The message object encapsulating the message to send. Unless an immediate * send could be performed, the object will be retained until the asynchronous * send operation is complete and the channel handler has returned. The storage * underlying the message object may be modified by the send operation. * * @param options * Additional send options to pass to mach_msg() when performing the send * operation. * * @param send_flags * Flags to configure the send operation. Must be 0 for now. * * @param send_result * Out parameter to return the result of the immediate send attempt. * If a deferred send is required, returns DISPATCH_MACH_NEEDS_DEFERRED_SEND. * Must not be NULL. * * @param send_error * Out parameter to return the error from the immediate send attempt. * If a deferred send is required, returns 0. Must not be NULL. */ API_AVAILABLE(macos(10.12), ios(10.0), tvos(10.0), watchos(3.0)) DISPATCH_EXPORT DISPATCH_NONNULL1 DISPATCH_NONNULL2 DISPATCH_NONNULL5 DISPATCH_NONNULL6 DISPATCH_NOTHROW void dispatch_mach_send_with_result(dispatch_mach_t channel, dispatch_mach_msg_t message, mach_msg_option_t options, dispatch_mach_send_flags_t send_flags, dispatch_mach_reason_t *send_result, mach_error_t *send_error); /*! * @function dispatch_mach_send_and_wait_for_reply * Synchronously send a message encapsulated in a dispatch mach message object * to the specified mach channel and wait for a reply. * * Unless the message is being sent to a send-once right (as determined by the * presence of MACH_MSG_TYPE_MOVE_SEND_ONCE in the message header remote bits), * the message header remote port is set to the channel send right before the * send operation is performed. * * The message is required to expect a direct reply (as determined by the * presence of MACH_MSG_TYPE_MAKE_SEND_ONCE in the message header local bits) * and this function will not complete until the receive right specified in the * message header local port receives a reply message (or a send-once * notification) which will be returned, or until that receive right is * destroyed in response to the channel being canceled, in which case NULL will * be returned. * In all these cases the application must wait for the channel handler to * be invoked with a DISPATCH_MACH_REPLY_RECEIVED or DISPATCH_MACH_DISCONNECTED * message before releasing that receive right. * * Alternatively, the application may specify MACH_PORT_NULL in the header local * port to indicate that the channel should create and manage the reply receive * right internally, including destroying it upon channel cancellation. * This is a more efficient mode of operation as no asynchronous operations are * required to return the receive right (i.e. the channel handler will not be * called as described above). * * If the message send operation is attempted but the channel is canceled * before the send operation succesfully completes, the message returned to the * channel handler with DISPATCH_MACH_MESSAGE_NOT_SENT may be the result of a * pseudo-receive operation. The receive right originally specified in the * message header local port will returned in a DISPATCH_MACH_DISCONNECTED * message (unless it was MACH_PORT_NULL). * * @param channel * The mach channel to which to send the message. * * @param message * The message object encapsulating the message to send. The object will be * retained until the send operation is complete and the channel handler has * returned. The storage underlying the message object may be modified by the * send operation. * * @param options * Additional send options to pass to mach_msg() when performing the send * operation. * * @result * The received reply message object, or NULL if the channel was canceled. */ API_AVAILABLE(macos(10.11), ios(9.0)) DISPATCH_EXPORT DISPATCH_MALLOC DISPATCH_RETURNS_RETAINED DISPATCH_WARN_RESULT DISPATCH_NONNULL1 DISPATCH_NONNULL2 DISPATCH_NOTHROW dispatch_mach_msg_t _Nullable dispatch_mach_send_and_wait_for_reply(dispatch_mach_t channel, dispatch_mach_msg_t message, mach_msg_option_t options); /*! * @function dispatch_mach_send_with_result_and_wait_for_reply * Synchronously send a message encapsulated in a dispatch mach message object * to the specified mach channel and wait for a reply. If an immediate send can * be performed, return its result via out parameters. * * Unless the message is being sent to a send-once right (as determined by the * presence of MACH_MSG_TYPE_MOVE_SEND_ONCE in the message header remote bits), * the message header remote port is set to the channel send right before the * send operation is performed. * * The message is required to expect a direct reply (as determined by the * presence of MACH_MSG_TYPE_MAKE_SEND_ONCE in the message header local bits) * and this function will not complete until the receive right specified in the * message header local port receives a reply message (or a send-once * notification) which will be returned, or until that receive right is * destroyed in response to the channel being canceled, in which case NULL will * be returned. * In all these cases the application must wait for the channel handler to * be invoked with a DISPATCH_MACH_REPLY_RECEIVED or DISPATCH_MACH_DISCONNECTED * message before releasing that receive right. * * Alternatively, the application may specify MACH_PORT_NULL in the header local * port to indicate that the channel should create and manage the reply receive * right internally, including destroying it upon channel cancellation. * This is a more efficient mode of operation as no asynchronous operations are * required to return the receive right (i.e. the channel handler will not be * called as described above). * * If the message send operation is attempted but the channel is canceled * before the send operation succesfully completes, the message returned to the * channel handler with DISPATCH_MACH_MESSAGE_NOT_SENT may be the result of a * pseudo-receive operation. The receive right originally specified in the * message header local port will returned in a DISPATCH_MACH_DISCONNECTED * message (unless it was MACH_PORT_NULL). * * If an immediate send could be performed, returns the resulting reason * (e.g. DISPATCH_MACH_MESSAGE_SENT) and possible error to the caller in the * send_result and send_error out parameters (instead of via the channel * handler), in which case the passed-in message and associated resources * can be disposed of synchronously. * * If a deferred send is required, returns DISPATCH_MACH_NEEDS_DEFERRED_SEND * in the send_result out parameter to indicate that the passed-in message has * been retained and associated resources must not be disposed of until the * message is returned asynchronusly via the channel handler. * * @param channel * The mach channel to which to send the message. * * @param message * The message object encapsulating the message to send. Unless an immediate * send could be performed, the object will be retained until the asynchronous * send operation is complete and the channel handler has returned. The storage * underlying the message object may be modified by the send operation. * * @param options * Additional send options to pass to mach_msg() when performing the send * operation. * * @param send_flags * Flags to configure the send operation. Must be 0 for now. * * @param send_result * Out parameter to return the result of the immediate send attempt. * If a deferred send is required, returns DISPATCH_MACH_NEEDS_DEFERRED_SEND. * Must not be NULL. * * @param send_error * Out parameter to return the error from the immediate send attempt. * If a deferred send is required, returns 0. Must not be NULL. * * @result * The received reply message object, or NULL if the channel was canceled. */ API_AVAILABLE(macos(10.12), ios(10.0), tvos(10.0), watchos(3.0)) DISPATCH_EXPORT DISPATCH_MALLOC DISPATCH_RETURNS_RETAINED DISPATCH_WARN_RESULT DISPATCH_NONNULL1 DISPATCH_NONNULL2 DISPATCH_NONNULL5 DISPATCH_NONNULL6 DISPATCH_NOTHROW dispatch_mach_msg_t _Nullable dispatch_mach_send_with_result_and_wait_for_reply(dispatch_mach_t channel, dispatch_mach_msg_t message, mach_msg_option_t options, dispatch_mach_send_flags_t send_flags, dispatch_mach_reason_t *send_result, mach_error_t *send_error); #ifdef __BLOCKS__ /*! * @function dispatch_mach_send_barrier * Submit a send barrier to the specified mach channel. Messages submitted to * the channel before the barrier will be sent before the barrier block is * executed, and messages submitted to the channel after the barrier will only * be sent once the barrier block has completed and the channel handler * invocation for the barrier has returned. * * @param channel * The mach channel to which to submit the barrier. * * @param barrier * The barrier block to submit to the channel target queue. */ API_AVAILABLE(macos(10.9), ios(6.0)) DISPATCH_EXPORT DISPATCH_NONNULL_ALL DISPATCH_NOTHROW void dispatch_mach_send_barrier(dispatch_mach_t channel, dispatch_block_t barrier); #endif /*! * @function dispatch_mach_send_barrier_f * Submit a send barrier to the specified mach channel. Messages submitted to * the channel before the barrier will be sent before the barrier block is * executed, and messages submitted to the channel after the barrier will only * be sent once the barrier block has completed and the channel handler * invocation for the barrier has returned. * * @param channel * The mach channel to which to submit the barrier. * * @param context * The application-defined context parameter to pass to the function. * * @param barrier * The barrier function to submit to the channel target queue. */ API_AVAILABLE(macos(10.9), ios(6.0)) DISPATCH_EXPORT DISPATCH_NONNULL1 DISPATCH_NONNULL3 DISPATCH_NOTHROW void dispatch_mach_send_barrier_f(dispatch_mach_t channel, void *_Nullable context, dispatch_function_t barrier); #ifdef __BLOCKS__ /*! * @function dispatch_mach_receive_barrier * Submit a receive barrier to the specified mach channel. Channel handlers for * messages received by the channel after the receive barrier has been * submitted will only be invoked once the barrier block has completed and the * channel handler invocation for the barrier has returned. * * @param channel * The mach channel to which to submit the receive barrier. * * @param barrier * The barrier block to submit to the channel target queue. */ API_AVAILABLE(macos(10.9), ios(6.0)) DISPATCH_EXPORT DISPATCH_NONNULL_ALL DISPATCH_NOTHROW void dispatch_mach_receive_barrier(dispatch_mach_t channel, dispatch_block_t barrier); #endif /*! * @function dispatch_mach_receive_barrier_f * Submit a receive barrier to the specified mach channel. Channel handlers for * messages received by the channel after the receive barrier has been * submitted will only be invoked once the barrier block has completed and the * channel handler invocation for the barrier has returned. * * @param channel * The mach channel to which to submit the receive barrier. * * @param context * The application-defined context parameter to pass to the function. * * @param barrier * The barrier function to submit to the channel target queue. */ API_AVAILABLE(macos(10.9), ios(6.0)) DISPATCH_EXPORT DISPATCH_NONNULL1 DISPATCH_NONNULL3 DISPATCH_NOTHROW void dispatch_mach_receive_barrier_f(dispatch_mach_t channel, void *_Nullable context, dispatch_function_t barrier); /*! * @function dispatch_mach_get_checkin_port * Returns the port specified in the message header remote port of the check-in * message passed to the most recent invocation of dispatch_mach_connect() or * dispatch_mach_reconnect() for the provided mach channel (irrespective of the * completion of the (re)connect or check-in operations in question). * * Returns MACH_PORT_NULL if dispatch_mach_connect() has not yet been called or * if the most recently specified check-in message was NULL, and MACH_PORT_DEAD * if the channel has been canceled. * * It is the responsibility of the application to ensure that the port * specified in a check-in message remains valid at the time this function is * called. * * @param channel * The mach channel to query. * * @result * The most recently specified check-in port for the channel. */ API_AVAILABLE(macos(10.9), ios(6.0)) DISPATCH_EXPORT DISPATCH_NONNULL_ALL DISPATCH_NOTHROW mach_port_t dispatch_mach_get_checkin_port(dispatch_mach_t channel); // SPI for libxpc /* * Type for the callback for receipt of asynchronous replies to * dispatch_mach_send_with_result_and_async_reply_4libxpc(). */ typedef void (*_Nonnull dispatch_mach_async_reply_callback_t)(void *context, dispatch_mach_reason_t reason, dispatch_mach_msg_t message); API_AVAILABLE(macos(10.12), ios(10.0), tvos(10.0), watchos(3.0)) typedef const struct dispatch_mach_xpc_hooks_s { #define DISPATCH_MACH_XPC_HOOKS_VERSION 3 unsigned long version; /* Fields available in version 1. */ /* * Called to handle a Mach message event inline if possible. Returns true * if the event was handled, false if the event should be delivered to the * channel event handler. The implementation should not make any assumptions * about the thread in which the function is called and cannot assume that * invocations of this function are serialized relative to each other or * relative to the channel's event handler function. In addition, the * handler must not throw an exception or call out to any code that might * throw an exception. */ bool (* _Nonnull dmxh_direct_message_handler)(void *_Nullable context, dispatch_mach_reason_t reason, dispatch_mach_msg_t message, mach_error_t error); /* Fields available in version 2. */ /* * Gets the queue to which a reply to a message sent using * dispatch_mach_send_with_result_and_async_reply_4libxpc() should be * delivered. The msg_context argument is the value of the do_ctxt field * of the outgoing message, as returned by dispatch_get_context(). If this * function returns NULL, the reply will be delivered to the channel queue. * This function should not make any assumptions about the thread on which * it is called and, since it may be called more than once per message, it * should execute as quickly as possible and not attempt to synchronize with * other code. */ dispatch_queue_t _Nullable (*_Nonnull dmxh_msg_context_reply_queue)( void *_Nonnull msg_context); /* * Called when a reply to a message sent by * dispatch_mach_send_with_result_and_async_reply_4libxpc() is received. The * message argument points to the reply message and the context argument is * the context value passed to dispatch_mach_create_4libxpc() when creating * the Mach channel. The handler is called on the queue that is returned by * dmxh_msg_context_reply_queue() when the reply is received or if the * channel is disconnected. The reason argument is * DISPATCH_MACH_MESSAGE_RECEIVED if a reply has been received or * DISPATCH_MACH_ASYNC_WAITER_DISCONNECTED if the channel has been * disconnected. Refer to the documentation for * dispatch_mach_send_with_result_and_async_reply_4libxpc() for more * details. */ dispatch_mach_async_reply_callback_t dmxh_async_reply_handler; /* Fields available in version 3. */ /** * Called once when the Mach channel has been activated. If this function * returns true, a DISPATCH_MACH_SIGTERM_RECEIVED notification will be * delivered to the channel's event handler when a SIGTERM is received. */ bool (* _Nullable dmxh_enable_sigterm_notification)( void *_Nullable context); } *dispatch_mach_xpc_hooks_t; #define DISPATCH_MACH_XPC_SUPPORTS_ASYNC_REPLIES(hooks) ((hooks)->version >= 2) /*! * @function dispatch_mach_hooks_install_4libxpc * * @abstract * installs XPC callbacks for dispatch Mach channels. * * @discussion * In order to improve the performance of the XPC/dispatch interface, it is * sometimes useful for dispatch to be able to call directly into XPC. The * channel hooks structure should be initialized with pointers to XPC callback * functions, or NULL for callbacks that XPC does not support. The version * number in the structure must be set to reflect the fields that have been * initialized. This function may be called only once. * * @param hooks * A pointer to the channel hooks structure. This must remain valid once set. */ API_AVAILABLE(macos(10.12), ios(10.0), tvos(10.0), watchos(3.0)) DISPATCH_EXPORT DISPATCH_NONNULL_ALL DISPATCH_NOTHROW void dispatch_mach_hooks_install_4libxpc(dispatch_mach_xpc_hooks_t hooks); /*! * @function dispatch_mach_create_4libxpc * Create a dispatch mach channel to asynchronously receive and send mach * messages, specifically for libxpc. * * The specified handler will be called with the corresponding reason parameter * for each message received and for each message that was successfully sent, * that failed to be sent, or was not sent; as well as when a barrier block * has completed, or when channel connection, reconnection or cancellation has * taken effect. However, the handler will not be called for messages that * were passed to the XPC hooks dmxh_direct_message_handler function if that * function returned true. * * Dispatch mach channels are created in a disconnected state, they must be * connected via dispatch_mach_connect() to begin receiving and sending * messages. * * @param label * An optional string label to attach to the channel. The string is not copied, * if it is non-NULL it must point to storage that remains valid for the * lifetime of the channel object. May be NULL. * * @param queue * The target queue of the channel, where the handler and barrier blocks will * be submitted. * * @param context * The application-defined context to pass to the handler. * * @param handler * The handler function to submit when a message has been sent or received. * * @result * The newly created dispatch mach channel. */ API_AVAILABLE(macos(10.12), ios(10.0), tvos(10.0), watchos(3.0)) DISPATCH_EXPORT DISPATCH_MALLOC DISPATCH_RETURNS_RETAINED DISPATCH_WARN_RESULT DISPATCH_NONNULL4 DISPATCH_NOTHROW dispatch_mach_t dispatch_mach_create_4libxpc(const char *_Nullable label, dispatch_queue_t _Nullable queue, void *_Nullable context, dispatch_mach_handler_function_t handler); /*! * @function dispatch_mach_send_with_result_and_async_reply_4libxpc * SPI for XPC that asynchronously sends a message encapsulated in a dispatch * mach message object to the specified mach channel. If an immediate send can * be performed, returns its result via out parameters. * * The reply message is processed on the queue returned by the * dmxh_msg_context_reply_queue function in the dispatch_mach_xpc_hooks_s * structure, which is called with a single argument whose value is the * do_ctxt field of the message argument to this function. The reply message is * delivered to the dmxh_async_reply_handler hook function instead of being * passed to the channel event handler. * * If the dmxh_msg_context_reply_queue function is not implemented or returns * NULL, the reply message is delivered to the channel event handler on the * channel queue. * * Unless the message is being sent to a send-once right (as determined by the * presence of MACH_MSG_TYPE_MOVE_SEND_ONCE in the message header remote bits), * the message header remote port is set to the channel send right before the * send operation is performed. * * The message is required to expect a direct reply (as determined by the * presence of MACH_MSG_TYPE_MAKE_SEND_ONCE in the message header local bits). * The receive right specified in the message header local port will be * monitored until a reply message (or a send-once notification) is received, or * the channel is canceled. Hence the application must wait for the reply * to be received or for a DISPATCH_MACH_ASYNC_WAITER_DISCONNECTED message * before releasing that receive right. * * If the message send operation is attempted but the channel is canceled * before the send operation succesfully completes, the message returned to the * channel handler with DISPATCH_MACH_MESSAGE_NOT_SENT may be the result of a * pseudo-receive operation and the receive right originally specified in the * message header local port will be returned in a * DISPATCH_MACH_ASYNC_WAITER_DISCONNECTED message. * * If an immediate send could be performed, returns the resulting reason * (e.g. DISPATCH_MACH_MESSAGE_SENT) and possible error to the caller in the * send_result and send_error out parameters (instead of via the channel * handler), in which case the passed-in message and associated resources * can be disposed of synchronously. * * If a deferred send is required, returns DISPATCH_MACH_NEEDS_DEFERRED_SEND * in the send_result out parameter to indicate that the passed-in message has * been retained and associated resources must not be disposed of until the * message is returned asynchronusly via the channel handler. * * @param channel * The mach channel to which to send the message. * * @param message * The message object encapsulating the message to send. Unless an immediate * send could be performed, the object will be retained until the asynchronous * send operation is complete and the channel handler has returned. The storage * underlying the message object may be modified by the send operation. * * @param options * Additional send options to pass to mach_msg() when performing the send * operation. * * @param send_flags * Flags to configure the send operation. Must be 0 for now. * * @param send_result * Out parameter to return the result of the immediate send attempt. * If a deferred send is required, returns DISPATCH_MACH_NEEDS_DEFERRED_SEND. * Must not be NULL. * * @param send_error * Out parameter to return the error from the immediate send attempt. * If a deferred send is required, returns 0. Must not be NULL. */ API_AVAILABLE(macos(10.12), ios(10.0), tvos(10.0), watchos(3.0)) DISPATCH_EXPORT DISPATCH_NONNULL1 DISPATCH_NONNULL2 DISPATCH_NONNULL5 DISPATCH_NONNULL6 DISPATCH_NOTHROW void dispatch_mach_send_with_result_and_async_reply_4libxpc(dispatch_mach_t channel, dispatch_mach_msg_t message, mach_msg_option_t options, dispatch_mach_send_flags_t send_flags, dispatch_mach_reason_t *send_result, mach_error_t *send_error); DISPATCH_ASSUME_NONNULL_END #endif // DISPATCH_MACH_SPI __END_DECLS #endif