Makefile.in   [plain text]


# Makefile.in generated by automake 1.9.5 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#  Makefile.am
#
#  The iODBC driver manager.
#
#  Copyright (C) 1996-2006 by OpenLink Software <iodbc@openlinksw.com>
#  All Rights Reserved.
#
#  This software is released under the terms of either of the following
#  licenses:
#
#      - GNU Library General Public License (see LICENSE.LGPL)
#      - The BSD License (see LICENSE.BSD).
#
#  Note that the only valid version of the LGPL license as far as this
#  project is concerned is the original GNU Library General Public License
#  Version 2, dated June 1991.
#
#  While not mandated by the BSD license, any patches you make to the
#  iODBC source code may be contributed back into the iODBC project
#  at your discretion. Contributions will benefit the Open Source and
#  Data Access community as a whole. Submissions may be made at:
#
#      http://www.iodbc.org
#
#
#  GNU Library Generic Public License Version 2
#  ============================================
#  This library is free software; you can redistribute it and/or
#  modify it under the terms of the GNU Library General Public
#  License as published by the Free Software Foundation; only
#  Version 2 of the License dated June 1991.
#
#  This library is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
#  Library General Public License for more details.
#
#  You should have received a copy of the GNU Library General Public
#  License along with this library; if not, write to the Free
#  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
#
#
#  The BSD License
#  ===============
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions
#  are met:
#
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in
#     the documentation and/or other materials provided with the
#     distribution.
#  3. Neither the name of OpenLink Software Inc. nor the names of its
#     contributors may be used to endorse or promote products derived
#     from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL OPENLINK OR
#  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
#  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
#  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
#  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
#  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
#  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#


SOURCES = $(libdrvproxy_la_SOURCES)

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = drvproxy
DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/include/config.h
CONFIG_CLEAN_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(libdir)"
libLTLIBRARIES_INSTALL = $(INSTALL)
LTLIBRARIES = $(lib_LTLIBRARIES)
am__DEPENDENCIES_1 =
@GTK_FALSE@libdrvproxy_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
@GTK_FALSE@	../iodbcadm/libiodbcadm.la \
@GTK_FALSE@	../iodbcinst/libiodbc_common.la \
@GTK_FALSE@	../iodbcinst/libiodbcinst.la
@GTK_TRUE@libdrvproxy_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
@GTK_TRUE@	../iodbcadm/libiodbcadm.la \
@GTK_TRUE@	../drvproxy/gtk/libdrvproxy-gtk.la \
@GTK_TRUE@	../iodbcinst/libiodbc_common.la \
@GTK_TRUE@	../iodbcinst/libiodbcinst.la
am_libdrvproxy_la_OBJECTS = ConfigDSN.lo ConfigDriver.lo Info.lo \
	drvconn.lo
libdrvproxy_la_OBJECTS = $(am_libdrvproxy_la_OBJECTS)
@GUI_TRUE@am_libdrvproxy_la_rpath = -rpath $(libdir)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include
depcomp = $(SHELL) $(top_srcdir)/admin/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libdrvproxy_la_SOURCES)
DIST_SOURCES = $(libdrvproxy_la_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
HEADERS = $(noinst_HEADERS)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = gtk
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DARWIN_FALSE = @DARWIN_FALSE@
DARWIN_TRUE = @DARWIN_TRUE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
F77 = @F77@
FFLAGS = @FFLAGS@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_CONFIG = @GTK_CONFIG@
GTK_FALSE = @GTK_FALSE@
GTK_LIBS = @GTK_LIBS@
GTK_TRUE = @GTK_TRUE@
GUI_FALSE = @GUI_FALSE@
GUI_TRUE = @GUI_TRUE@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_LIBODBC_FALSE = @INSTALL_LIBODBC_FALSE@
INSTALL_LIBODBC_TRUE = @INSTALL_LIBODBC_TRUE@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBADD_DL = @LIBADD_DL@
LIBADD_OS = @LIBADD_OS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
filedsnpath = @filedsnpath@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
inidir = @inidir@
install_sh = @install_sh@
lib_version = @lib_version@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
odbcmode = @odbcmode@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
@GUI_TRUE@SUBDIRS = gtk
@GUI_TRUE@lib_LTLIBRARIES = libdrvproxy.la
@GTK_FALSE@INCLUDES = \
@GTK_FALSE@	-I$(top_srcdir)/include \
@GTK_FALSE@	-I$(top_srcdir)/iodbc \
@GTK_FALSE@	-I$(top_srcdir)/iodbcinst\
@GTK_FALSE@	-I$(top_srcdir)/iodbcadm 

@GTK_TRUE@INCLUDES = \
@GTK_TRUE@	-I$(top_srcdir)/include \
@GTK_TRUE@	-I$(top_srcdir)/iodbc \
@GTK_TRUE@	-I$(top_srcdir)/iodbcinst \
@GTK_TRUE@	-I$(top_srcdir)/iodbcadm \
@GTK_TRUE@	@GTK_CFLAGS@ -D__GTK__

libdrvproxy_la_LDFLAGS = -version-info @lib_version@ \
			  -export-symbols $(srcdir)/drvproxy.exp

@GTK_FALSE@libdrvproxy_la_LIBADD = \
@GTK_FALSE@	$(LIBADD_DL) \
@GTK_FALSE@	../iodbcadm/libiodbcadm.la \
@GTK_FALSE@	../iodbcinst/libiodbc_common.la \
@GTK_FALSE@	../iodbcinst/libiodbcinst.la

@GTK_TRUE@libdrvproxy_la_LIBADD = \
@GTK_TRUE@	$(LIBADD_DL) \
@GTK_TRUE@	../iodbcadm/libiodbcadm.la \
@GTK_TRUE@	../drvproxy/gtk/libdrvproxy-gtk.la \
@GTK_TRUE@	../iodbcinst/libiodbc_common.la \
@GTK_TRUE@	../iodbcinst/libiodbcinst.la \
@GTK_TRUE@	@GTK_LIBS@

libdrvproxy_la_SOURCES = \
	ConfigDSN.c \
	ConfigDriver.c \
	Info.c \
	drvconn.c

noinst_HEADERS = gui.h
EXTRA_DIST = drvproxy.exp
all: all-recursive

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  drvproxy/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  drvproxy/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    f=$(am__strip_dir) \
	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
	  else :; fi; \
	done

uninstall-libLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  p=$(am__strip_dir) \
	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
	done

clean-libLTLIBRARIES:
	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libdrvproxy.la: $(libdrvproxy_la_OBJECTS) $(libdrvproxy_la_DEPENDENCIES) 
	$(LINK) $(am_libdrvproxy_la_rpath) $(libdrvproxy_la_LDFLAGS) $(libdrvproxy_la_OBJECTS) $(libdrvproxy_la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ConfigDSN.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ConfigDriver.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Info.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/drvconn.Plo@am__quote@

.c.o:
@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c $<

.c.obj:
@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(LTLIBRARIES) $(HEADERS)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(libdir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
	mostlyclean-am

distclean: distclean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am:

install-exec-am: install-libLTLIBRARIES

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
	clean clean-generic clean-libLTLIBRARIES clean-libtool \
	clean-recursive ctags ctags-recursive distclean \
	distclean-compile distclean-generic distclean-libtool \
	distclean-recursive distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-exec install-exec-am install-info \
	install-info-am install-libLTLIBRARIES install-man \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
	pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
	uninstall-info-am uninstall-libLTLIBRARIES

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: