# Danish translation of gimp-print.
# Copyright (C) 2001 Free Software Foundation, Inc.
# Keld Simonsen <keld@dkuug.dk>, 2001.
# Kjartan Maraas <kmaraas@gnome.org>, 2001.
#
msgid ""
msgstr ""
"Project-Id-Version: gimp-print 0.3\n"
"POT-Creation-Date: 2003-12-17 21:06-0500\n"
"PO-Revision-Date: 2003-01-06 21:22+0100\n"
"Last-Translator: Mogens Jæger <mogensjaeger@get2net.dk>\n"
"Language-Team: Dansk <da@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"
#: lib/getopt.c:681
#, c-format
msgid "%s: option `%s' is ambiguous\n"
msgstr "%s: flaget `%s' er flertydigt\n"
#: lib/getopt.c:706
#, c-format
msgid "%s: option `--%s' doesn't allow an argument\n"
msgstr "%s: flaget `--%s' tillader ikke argumenter\n"
#: lib/getopt.c:711
#, c-format
msgid "%s: option `%c%s' doesn't allow an argument\n"
msgstr "%s: flaget `%c%s' tillader ikke et argument\n"
#: lib/getopt.c:729 lib/getopt.c:902
#, c-format
msgid "%s: option `%s' requires an argument\n"
msgstr "%s: flaget `%s' kræver et argument\n"
#. --option
#: lib/getopt.c:758
#, c-format
msgid "%s: unrecognized option `--%s'\n"
msgstr "%s: ikke genkendt flag `--%s'\n"
#. +option or -option
#: lib/getopt.c:762
#, c-format
msgid "%s: unrecognized option `%c%s'\n"
msgstr "%s: ikke genkendt flag `%c%s'\n"
#. 1003.2 specifies the format of this message.
#: lib/getopt.c:788
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s: ulovligt flag -- %c\n"
#: lib/getopt.c:791
#, c-format
msgid "%s: invalid option -- %c\n"
msgstr "%s: ugyldigt flag -- %c\n"
#. 1003.2 specifies the format of this message.
#: lib/getopt.c:821 lib/getopt.c:951
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s: flaget kræver et argument -- %c\n"
#: lib/getopt.c:868
#, c-format
msgid "%s: option `-W %s' is ambiguous\n"
msgstr "%s: flaget `-W %s' er flertydigt\n"
#: lib/getopt.c:886
#, c-format
msgid "%s: option `-W %s' doesn't allow an argument\n"
msgstr "%s: flaget `-W %s' tillader ikke argumenter\n"
#: src/main/print-canon.c:1172 src/main/print-escp2-data.c:2923
#: src/main/print-escp2-data.c:2985 src/main/print-escp2-data.c:3047
#: src/main/print-escp2-data.c:3109 src/main/print-lexmark.c:909
msgid "Plain Paper"
msgstr "Almindeligt papir"
#: src/main/print-canon.c:1173 src/main/print-escp2-data.c:2935
#: src/main/print-escp2-data.c:2997 src/main/print-escp2-data.c:3059
#: src/main/print-escp2-data.c:3121 src/main/print-lexmark.c:915
msgid "Transparencies"
msgstr "Transparenter"
#: src/main/print-canon.c:1174
msgid "Back Print Film"
msgstr "Bagside print film"
#: src/main/print-canon.c:1175
msgid "Fabric Sheets"
msgstr "Stof ark"
#: src/main/print-canon.c:1176
msgid "Envelope"
msgstr "Kuvert"
#: src/main/print-canon.c:1177
msgid "High Resolution Paper"
msgstr "Høj opløsnings papir"
#: src/main/print-canon.c:1178
msgid "T-Shirt Transfers"
msgstr "T-shirts overføring"
#: src/main/print-canon.c:1179
msgid "High Gloss Film"
msgstr "Højglans Film"
#: src/main/print-canon.c:1180
msgid "Glossy Photo Paper"
msgstr "Blankt foto papir"
#: src/main/print-canon.c:1181
msgid "Glossy Photo Cards"
msgstr "Blanke foto kort"
#: src/main/print-canon.c:1182
msgid "Photo Paper Pro"
msgstr "Foto papir pro"
#: src/main/print-canon.c:1183 src/main/print-escp2-data.c:2972
#: src/main/print-escp2-data.c:3034 src/main/print-escp2-data.c:3096
#: src/main/print-escp2-data.c:3158 src/main/print-lexmark.c:945
msgid "Other"
msgstr "Andet"
#: src/main/print-canon.c:1464 src/main/print-lexmark.c:1160
msgid "Auto Sheet Feeder"
msgstr "Auto ark føder"
#: src/main/print-canon.c:1465 src/main/print-lexmark.c:1161
msgid "Manual with Pause"
msgstr "Manuel med pause"
#: src/main/print-canon.c:1466 src/main/print-lexmark.c:1162
msgid "Manual without Pause"
msgstr "Manuel uden pause"
#: src/escputil/escputil.c:633 src/main/print-canon.c:1558
#: src/main/print-lexmark.c:666
msgid "Black"
msgstr "Sort"
#: src/main/print-canon.c:1563
msgid "CMY Color"
msgstr "CMY farver"
#: src/main/print-canon.c:1568
msgid "CMYK Color"
msgstr "CMYK farver"
#: src/main/print-canon.c:1573
msgid "Photo CcMmY Color"
msgstr "Foto CcMmY farver"
#: src/main/print-canon.c:1578
msgid "Photo CcMmYK Color"
msgstr "Foto CcMmYK farver"
#: src/main/print-dither.c:64
msgid "Adaptive Hybrid"
msgstr "Adaptiv hybrid"
#: src/main/print-dither.c:65
msgid "Ordered"
msgstr "Ordnet"
#: src/main/print-dither.c:66
msgid "Fast"
msgstr "Hurtig"
#: src/main/print-dither.c:67
msgid "Very Fast"
msgstr "Meget hurtig"
#: src/main/print-dither.c:68
msgid "Hybrid Floyd-Steinberg"
msgstr "Hybrid Floyd-Steinberg"
#. Note to translators: "EvenTone" is the proper name, rather than a
#. descriptive name, of this algorithm.
#: src/main/print-dither.c:71
msgid "EvenTone"
msgstr "EvenTone"
#: src/main/print-escp2-data.c:2573 src/main/print-escp2-data.c:2583
#: src/main/print-escp2-data.c:2593 src/main/print-escp2-data.c:2603
#: src/main/print-lexmark.c:651 src/main/print-lexmark.c:731
msgid "Three Color Composite"
msgstr "Tre-farvet sammensat"
#. output_type ncolors used_colors pass_length v_top_head_offset
#. * h_catridge_offset
#. * h_direction_offset
#. * head_offset
#: src/main/print-escp2-data.c:2613 src/main/print-escp2-data.c:2623
#: src/main/print-escp2-data.c:2633 src/main/print-escp2-data.c:2643
#: src/main/print-lexmark.c:646 src/main/print-lexmark.c:726
msgid "Four Color Standard"
msgstr "Fire-farvet standard"
#: src/main/print-escp2-data.c:2653 src/main/print-escp2-data.c:2739
#: src/main/print-lexmark.c:656 src/main/print-lexmark.c:736
msgid "Six Color Photo"
msgstr "Seks-farvet foto"
#: src/main/print-escp2-data.c:2663 src/main/print-escp2-data.c:2749
#: src/main/print-lexmark.c:661 src/main/print-lexmark.c:741
msgid "Five Color Photo Composite"
msgstr "Fem-farvet foto sammensat"
#: src/main/print-escp2-data.c:2673 src/main/print-escp2-data.c:2759
msgid "Seven Color Enhanced"
msgstr "Syv-farvet forbedret"
#: src/main/print-escp2-data.c:2683 src/main/print-escp2-data.c:2769
msgid "Six Color Enhanced Composite"
msgstr "Seks-farvet forbedret sammensat"
#: src/main/print-escp2-data.c:2693 src/main/print-escp2-data.c:2779
msgid "Seven Color Photo"
msgstr "Syv-farvet foto"
#: src/main/print-escp2-data.c:2703 src/main/print-escp2-data.c:2789
msgid "Two Level Grayscale"
msgstr "To niveau gråtoner"
#: src/main/print-escp2-data.c:2712 src/main/print-escp2-data.c:2721
#: src/main/print-escp2-data.c:2730
msgid "Quadtone"
msgstr "Quadtone"
#: src/main/print-escp2-data.c:2926 src/main/print-escp2-data.c:2988
#: src/main/print-escp2-data.c:3050 src/main/print-escp2-data.c:3112
msgid "Plain Paper Fast Load"
msgstr "Almindeligt papir hurtig indføring"
#. 7.25 * 10.5in
#: src/main/print-escp2-data.c:2929 src/main/print-escp2-data.c:2991
#: src/main/print-escp2-data.c:3053 src/main/print-escp2-data.c:3115
#: src/main/print-util.c:541
msgid "Postcard"
msgstr "Postkort"
#: src/main/print-escp2-data.c:2932 src/main/print-escp2-data.c:2994
#: src/main/print-escp2-data.c:3056 src/main/print-escp2-data.c:3118
#: src/main/print-lexmark.c:912
msgid "Glossy Film"
msgstr "Blank film"
#: src/main/print-escp2-data.c:2938 src/main/print-escp2-data.c:3000
#: src/main/print-escp2-data.c:3062 src/main/print-escp2-data.c:3124
#: src/main/print-lexmark.c:918
msgid "Envelopes"
msgstr "Kuverter"
#: src/main/print-escp2-data.c:2941 src/main/print-escp2-data.c:3003
#: src/main/print-escp2-data.c:3065 src/main/print-escp2-data.c:3127
msgid "Back Light Film"
msgstr "Baglys film"
#: src/main/print-escp2-data.c:2944 src/main/print-escp2-data.c:3006
#: src/main/print-escp2-data.c:3068 src/main/print-escp2-data.c:3130
#: src/main/print-lexmark.c:921
msgid "Matte Paper"
msgstr "Mat papir"
#: src/main/print-escp2-data.c:2947 src/main/print-escp2-data.c:3009
#: src/main/print-escp2-data.c:3071 src/main/print-escp2-data.c:3133
#: src/main/print-lexmark.c:924
msgid "Inkjet Paper"
msgstr "Inkjet papir"
#: src/main/print-escp2-data.c:2950 src/main/print-escp2-data.c:3012
#: src/main/print-escp2-data.c:3074 src/main/print-escp2-data.c:3136
#: src/main/print-lexmark.c:927
msgid "Photo Quality Inkjet Paper"
msgstr "Foto kvalitets inkjet papir"
#: src/main/print-escp2-data.c:2953 src/main/print-escp2-data.c:3015
#: src/main/print-escp2-data.c:3077 src/main/print-escp2-data.c:3139
#: src/main/print-lexmark.c:930
msgid "Photo Paper"
msgstr "Foto papir"
#: src/main/print-escp2-data.c:2956 src/main/print-escp2-data.c:3018
#: src/main/print-escp2-data.c:3080 src/main/print-escp2-data.c:3142
#: src/main/print-lexmark.c:933
msgid "Premium Glossy Photo Paper"
msgstr "Premium blankt foto papir"
#: src/main/print-escp2-data.c:2960 src/main/print-escp2-data.c:3022
#: src/main/print-escp2-data.c:3084 src/main/print-escp2-data.c:3146
#: src/main/print-lexmark.c:936
msgid "Premium Luster Photo Paper"
msgstr "Premium glittet foto papir"
#: src/main/print-escp2-data.c:2963 src/main/print-escp2-data.c:3025
#: src/main/print-escp2-data.c:3087 src/main/print-escp2-data.c:3149
#: src/main/print-lexmark.c:939
msgid "Photo Quality Glossy Paper"
msgstr "Foto kvalitet blankt papir"
#: src/main/print-escp2-data.c:2966 src/main/print-escp2-data.c:3028
#: src/main/print-escp2-data.c:3090 src/main/print-escp2-data.c:3152
#: src/main/print-lexmark.c:942
msgid "Ilford Heavy Paper"
msgstr "Ilford Heavy Papir"
#: src/main/print-escp2-data.c:2969 src/main/print-escp2-data.c:3031
#: src/main/print-escp2-data.c:3093 src/main/print-escp2-data.c:3155
msgid "ColorLife Paper"
msgstr "ColorLife Papir"
#: src/main/print-escp2-data.c:3421 src/main/print-escp2-data.c:3423
#: src/main/print-escp2-data.c:3680 src/main/print-escp2-data.c:3682
#: src/main/print-escp2-data.c:3755
msgid "360 x 90 DPI Fast Economy Draft"
msgstr "360 x 90 DPI hurtig sparsom kladde"
#: src/main/print-escp2-data.c:3426 src/main/print-escp2-data.c:3428
#: src/main/print-escp2-data.c:3685 src/main/print-escp2-data.c:3687
#: src/main/print-escp2-data.c:3758
msgid "360 x 120 DPI Economy Draft"
msgstr "360 x 120 DPI sparsom kladde"
#: src/main/print-escp2-data.c:3431 src/main/print-escp2-data.c:3433
#: src/main/print-escp2-data.c:3508 src/main/print-escp2-data.c:3690
#: src/main/print-escp2-data.c:3692 src/main/print-escp2-data.c:3761
msgid "180 DPI Economy Draft"
msgstr "180 DPI sparsom kladde"
#: src/main/print-escp2-data.c:3436 src/main/print-escp2-data.c:3438
#: src/main/print-escp2-data.c:3695 src/main/print-escp2-data.c:3697
#: src/main/print-escp2-data.c:3764
msgid "360 x 240 DPI Draft"
msgstr "360 x 240 DPI kladde"
#: src/main/print-escp2-data.c:3441 src/main/print-escp2-data.c:3443
#: src/main/print-escp2-data.c:3511 src/main/print-escp2-data.c:3547
#: src/main/print-escp2-data.c:3549 src/main/print-escp2-data.c:3629
#: src/main/print-escp2-data.c:3631 src/main/print-escp2-data.c:3700
#: src/main/print-escp2-data.c:3702 src/main/print-escp2-data.c:3767
msgid "360 x 180 DPI Draft"
msgstr "360 x 180 DPI kladde"
#: src/main/print-escp2-data.c:3446 src/main/print-escp2-data.c:3454
#: src/main/print-escp2-data.c:3514 src/main/print-escp2-data.c:3552
#: src/main/print-escp2-data.c:3634 src/main/print-escp2-data.c:3705
#: src/main/print-escp2-data.c:3709 src/main/print-escp2-data.c:3774
msgid "360 DPI"
msgstr "360 DPI"
#: src/main/print-escp2-data.c:3448 src/main/print-escp2-data.c:3456
#: src/main/print-escp2-data.c:3516 src/main/print-escp2-data.c:3554
#: src/main/print-escp2-data.c:3636 src/main/print-escp2-data.c:3707
#: src/main/print-escp2-data.c:3711 src/main/print-escp2-data.c:3776
msgid "360 DPI Unidirectional"
msgstr "360 DPI envejs"
#: src/main/print-escp2-data.c:3450 src/main/print-escp2-data.c:3770
msgid "360 DPI Interleave"
msgstr "360 DPI Interleave"
#: src/main/print-escp2-data.c:3452 src/main/print-escp2-data.c:3772
msgid "360 DPI Interleave Unidirectional"
msgstr "360 DPI Interleave envejs"
#: src/main/print-escp2-data.c:3459 src/main/print-escp2-data.c:3519
#: src/main/print-escp2-data.c:3557 src/main/print-escp2-data.c:3598
#: src/main/print-escp2-data.c:3639 src/main/print-escp2-data.c:3714
#: src/main/print-escp2-data.c:3791
msgid "720 x 360 DPI"
msgstr "720 x 360 DPI"
#: src/main/print-escp2-data.c:3461 src/main/print-escp2-data.c:3521
#: src/main/print-escp2-data.c:3559 src/main/print-escp2-data.c:3600
#: src/main/print-escp2-data.c:3641 src/main/print-escp2-data.c:3716
#: src/main/print-escp2-data.c:3793
msgid "720 x 360 DPI Unidirectional"
msgstr "720 x 360 DPI envejs"
#: src/main/print-escp2-data.c:3464 src/main/print-escp2-data.c:3812
msgid "720 DPI Interleave"
msgstr "720 DPI Interleave"
#: src/main/print-escp2-data.c:3466 src/main/print-escp2-data.c:3814
msgid "720 DPI Interleave Unidirectional"
msgstr "720 DPI Interleave envejs"
#: src/main/print-escp2-data.c:3468 src/main/print-escp2-data.c:3524
#: src/main/print-escp2-data.c:3562 src/main/print-escp2-data.c:3603
#: src/main/print-escp2-data.c:3644 src/main/print-escp2-data.c:3719
msgid "720 DPI"
msgstr "720 DPI"
#: src/main/print-escp2-data.c:3470 src/main/print-escp2-data.c:3526
#: src/main/print-escp2-data.c:3564 src/main/print-escp2-data.c:3605
#: src/main/print-escp2-data.c:3646 src/main/print-escp2-data.c:3721
msgid "720 DPI Unidirectional"
msgstr "720 DPI envejs"
#: src/main/print-escp2-data.c:3472 src/main/print-escp2-data.c:3528
#: src/main/print-escp2-data.c:3566 src/main/print-escp2-data.c:3607
#: src/main/print-escp2-data.c:3648 src/main/print-escp2-data.c:3723
msgid "720 DPI High Quality"
msgstr "720 DPI høj kvalitet"
#: src/main/print-escp2-data.c:3474 src/main/print-escp2-data.c:3530
#: src/main/print-escp2-data.c:3568 src/main/print-escp2-data.c:3609
#: src/main/print-escp2-data.c:3650 src/main/print-escp2-data.c:3725
msgid "720 DPI High Quality Unidirectional"
msgstr "720 DPI høj kvalitet envejs"
#: src/main/print-escp2-data.c:3476 src/main/print-escp2-data.c:3532
#: src/main/print-escp2-data.c:3570 src/main/print-escp2-data.c:3611
#: src/main/print-escp2-data.c:3652 src/main/print-escp2-data.c:3727
msgid "720 DPI Highest Quality"
msgstr "720 DPI højeste kvalitet"
#: src/main/print-escp2-data.c:3479 src/main/print-escp2-data.c:3825
msgid "1440 x 720 DPI Interleave"
msgstr "1440 x 720 DPI Interleave"
#: src/main/print-escp2-data.c:3481 src/main/print-escp2-data.c:3827
msgid "1440 x 720 DPI Interleave Unidirectional"
msgstr "1440 x 720 DPI Interleave envejs"
#: src/main/print-escp2-data.c:3483 src/main/print-escp2-data.c:3535
#: src/main/print-escp2-data.c:3573 src/main/print-escp2-data.c:3614
#: src/main/print-escp2-data.c:3655 src/main/print-escp2-data.c:3730
msgid "1440 x 720 DPI"
msgstr "1440 x 720 DPI"
#: src/main/print-escp2-data.c:3485 src/main/print-escp2-data.c:3537
#: src/main/print-escp2-data.c:3575 src/main/print-escp2-data.c:3616
#: src/main/print-escp2-data.c:3657 src/main/print-escp2-data.c:3732
msgid "1440 x 720 DPI Unidirectional"
msgstr "1440 x 720 DPI envejs"
#: src/main/print-escp2-data.c:3487 src/main/print-escp2-data.c:3539
#: src/main/print-escp2-data.c:3577 src/main/print-escp2-data.c:3618
#: src/main/print-escp2-data.c:3659 src/main/print-escp2-data.c:3734
msgid "1440 x 720 DPI Highest Quality"
msgstr "1440 x 720 DPI højeste kvalitet"
#: src/main/print-escp2-data.c:3490 src/main/print-escp2-data.c:3580
#: src/main/print-escp2-data.c:3662 src/main/print-escp2-data.c:3737
msgid "2880 x 720 DPI"
msgstr "2880 x 720 DPI"
#: src/main/print-escp2-data.c:3492 src/main/print-escp2-data.c:3582
#: src/main/print-escp2-data.c:3664 src/main/print-escp2-data.c:3739
msgid "2880 x 720 DPI Unidirectional"
msgstr "2880 x 720 DPI envejs"
#: src/main/print-escp2-data.c:3495 src/main/print-escp2-data.c:3585
#: src/main/print-escp2-data.c:3667 src/main/print-escp2-data.c:3742
msgid "1440 x 1440 DPI"
msgstr "1440 x 1440 DPI"
#: src/main/print-escp2-data.c:3497 src/main/print-escp2-data.c:3587
#: src/main/print-escp2-data.c:3669 src/main/print-escp2-data.c:3744
msgid "1440 x 1440 DPI Highest Quality"
msgstr "1440 x 1440 DPI højeste kvalitet"
#: src/main/print-escp2-data.c:3500 src/main/print-escp2-data.c:3590
#: src/main/print-escp2-data.c:3621 src/main/print-escp2-data.c:3672
#: src/main/print-escp2-data.c:3747
msgid "2880 x 1440 DPI"
msgstr "2880 x 1440 DPI"
#: src/main/print-escp2-data.c:3778
msgid "360 DPI Full Overlap"
msgstr "360 DPI Fuld overlapning"
#: src/main/print-escp2-data.c:3780
msgid "360 DPI Full Overlap Unidirectional"
msgstr "360 DPI Fuld overlapning envejs"
#: src/main/print-escp2-data.c:3782
msgid "360 DPI FOL2"
msgstr "360 DPI FOL2"
#: src/main/print-escp2-data.c:3784
msgid "360 DPI FOL2 Unidirectional"
msgstr "360 DPI FOL2 envejs"
#: src/main/print-escp2-data.c:3786
msgid "360 DPI MW2"
msgstr "360 DPI MW2"
#: src/main/print-escp2-data.c:3788
msgid "360 DPI MW2 Unidirectional"
msgstr "360 DPI MW2 envejs"
#: src/main/print-escp2-data.c:3795
msgid "720 x 360 DPI Interleave"
msgstr "720 x 360 DPI Interleave"
#: src/main/print-escp2-data.c:3797
msgid "720 x 360 DPI Interleave Unidirectional"
msgstr "720 x 360 DPI Interleave envejs"
#: src/main/print-escp2-data.c:3799
msgid "720 x 360 DPI FOL"
msgstr "720 x 360 DPI FOL"
#: src/main/print-escp2-data.c:3801
msgid "720 x 360 DPI FOL Unidirectional"
msgstr "720 x 360 DPI FOL envejs"
#: src/main/print-escp2-data.c:3803
msgid "720 x 360 DPI FOL2"
msgstr "720 x 360 DPI FOL2"
#: src/main/print-escp2-data.c:3805
msgid "720 x 360 DPI FOL2 Unidirectional"
msgstr "720 x 360 DPI FOL2 envejs"
#: src/main/print-escp2-data.c:3807
msgid "720 x 360 DPI MW2"
msgstr "720 x 360 DPI MW2"
#: src/main/print-escp2-data.c:3809
msgid "720 x 360 DPI MW2 Unidirectional"
msgstr "720 x 360 DPI MW2 envejs"
#: src/main/print-escp2-data.c:3816
msgid "720 DPI Full Overlap"
msgstr "720 DPI Fuld overlapning"
#: src/main/print-escp2-data.c:3818
msgid "720 DPI Full Overlap Unidirectional"
msgstr "720 DPI Fuld overlapning envejs"
#: src/main/print-escp2-data.c:3820
msgid "720 DPI Four Pass"
msgstr "720 DPI Firedobbelt printning"
#: src/main/print-escp2-data.c:3822
msgid "720 DPI Four Pass Unidirectional"
msgstr "720 DPI Firedobbelt printning envejs"
#: src/main/print-escp2-data.c:3829
msgid "1440 x 720 DPI FOL"
msgstr "1440 x 720 DPI FOL"
#: src/main/print-escp2-data.c:3831
msgid "1440 x 720 DPI FOL Unidirectional"
msgstr "1440 x 720 DPI FOL envejs"
#: src/main/print-escp2-data.c:3833
msgid "1440 x 720 DPI Four Pass"
msgstr "1440 x 720 DPI Firedobbelt printning"
#: src/main/print-escp2-data.c:3835
msgid "1440 x 720 DPI Four Pass Unidirectional"
msgstr "1440 x 720 DPI Firedobbelt printning envejs"
#: src/main/print-escp2-data.c:3838
msgid "2880 x 720 DPI Interleave"
msgstr "2880 x 720 DPI Interleave"
#: src/main/print-escp2-data.c:3840
msgid "2880 x 720 DPI Interleave Unidirectional"
msgstr "2880 x 720 DPI Interleave envejs"
#: src/main/print-escp2-data.c:3842
msgid "2880 x 720 DPI FOL"
msgstr "2880 x 720 DPI FOL"
#: src/main/print-escp2-data.c:3844
msgid "2880 x 720 DPI FOL Unidirectional"
msgstr "2880 x 720 DPI FOL envejs"
#: src/main/print-escp2-data.c:3846
msgid "2880 x 720 DPI Four Pass"
msgstr "2880 x 720 DPI Firedobbelt printning"
#: src/main/print-escp2-data.c:3848
msgid "2880 x 720 DPI Four Pass Unidirectional"
msgstr "2880 x 720 DPI Firedobbelt printning envejs"
#: src/main/print-escp2-data.c:3851
msgid "1440 x 1440 DPI Interleave"
msgstr "1440 x 1440 DPI Interleave"
#: src/main/print-escp2-data.c:3853
msgid "1440 x 1440 DPI Interleave Unidirectional"
msgstr "1440 x 1440 DPI Interleave envejs"
#: src/main/print-escp2-data.c:3855
msgid "1440 x 1440 DPI FOL"
msgstr "1440 x 1440 DPI FOL"
#: src/main/print-escp2-data.c:3857
msgid "1440 x 1440 DPI FOL Unidirectional"
msgstr "1440 x 1440 DPI FOL envejs"
#: src/main/print-escp2-data.c:3859
msgid "1440 x 1440 DPI Four Pass"
msgstr "1440 x 1440 DPI Firedobbelt printning"
#: src/main/print-escp2-data.c:3861
msgid "1440 x 1440 DPI Four Pass Unidirectional"
msgstr "1440 x 1440 DPI Firedobbelt printning envejs"
#: src/main/print-escp2-data.c:3864
msgid "2880 x 1440 DPI Interleave"
msgstr "2880 x 1440 DPI Interleave"
#: src/main/print-escp2-data.c:3866
msgid "2880 x 1440 DPI Interleave Unidirectional"
msgstr "2880 x 1440 DPI Interleave envejs"
#: src/main/print-escp2-data.c:3868
msgid "2880 x 1440 DPI FOL"
msgstr "2880 x 1440 DPI FOL"
#: src/main/print-escp2-data.c:3870
msgid "2880 x 1440 DPI FOL Unidirectional"
msgstr "2880 x 1440 DPI FOL envejs"
#: src/main/print-escp2-data.c:3872
msgid "2880 x 1440 DPI Four Pass"
msgstr "2880 x 1440 DPI Firedobbelt printning"
#: src/main/print-escp2-data.c:3874
msgid "2880 x 1440 DPI Four Pass Unidirectional"
msgstr "2880 x 1440 DPI Firedobbelt printning envejs"
#: src/gimp/gimp_main_window.c:1616 src/main/print-escp2-data.c:3884
#: src/main/print-escp2-data.c:3910 src/main/print-escp2-data.c:3944
#: src/main/print-pcl.c:202
msgid "Standard"
msgstr "Standard"
#: src/main/print-escp2-data.c:3892 src/main/print-escp2-data.c:3952
msgid "Roll Feed"
msgstr "Rulle fødning"
#: src/main/print-escp2-data.c:3918
msgid "Roll Feed (cut each page)"
msgstr ""
#: src/main/print-escp2-data.c:3926
msgid "Roll Feed (do not cut)"
msgstr ""
#: src/main/print-escp2-data.c:3970
msgid "Cut Sheet Bin 1"
msgstr ""
#: src/main/print-escp2-data.c:3978
msgid "Cut Sheet Bin 2"
msgstr ""
#: src/main/print-escp2-data.c:3986
#, fuzzy
msgid "Cut Sheet Autoselect"
msgstr "Automatisk udvælgelse"
#: src/main/print-escp2-data.c:3994
msgid "Manual Selection"
msgstr ""
#. name hres vres softw v_pass overs unidir resid
#: src/main/print-lexmark.c:622 src/main/print-lexmark.c:708
msgid "300 DPI x 600 DPI"
msgstr "300 DPI x 600 DPI"
#: src/main/print-lexmark.c:623 src/main/print-lexmark.c:709
msgid "600 DPI"
msgstr "600 DPI"
#: src/main/print-lexmark.c:624 src/main/print-lexmark.c:710
msgid "600 DPI high quality"
msgstr "600 DPI høj kvalitet"
#: src/main/print-lexmark.c:625 src/main/print-lexmark.c:711
msgid "600 DPI Unidirectional"
msgstr "600 DPI envejs"
#: src/main/print-lexmark.c:626 src/main/print-lexmark.c:712
msgid "1200 DPI"
msgstr "1200 DPI"
#: src/main/print-lexmark.c:627 src/main/print-lexmark.c:713
msgid "1200 DPI high quality"
msgstr "1200 DPI høj kvalitet"
#: src/main/print-lexmark.c:628 src/main/print-lexmark.c:714
msgid "1200 DPI highest quality"
msgstr "1200 DPI højeste kvalitet"
#: src/main/print-lexmark.c:629 src/main/print-lexmark.c:715
msgid "1200 DPI Unidirectional"
msgstr "1200 DPI envejs"
#: src/main/print-lexmark.c:630
msgid "2400 DPI x 1200 DPI"
msgstr "2400 DPI x 1200 DPI"
#: src/main/print-lexmark.c:631
msgid "2400 DPI x 1200 DPI high quality"
msgstr "2400 DPI x 1200 DPI høj kvalitet"
#: src/main/print-lexmark.c:632
msgid "2400 DPI x 1200 DPI highest quality"
msgstr "2400 DPI x 1200 DPI højeste kvalitet"
#: src/main/print-lexmark.c:634
msgid "test print"
msgstr "test udskrift"
#: src/main/print-pcl.c:157
msgid "Plain"
msgstr "Almindelig"
#: src/main/print-pcl.c:158
#, fuzzy
msgid "Bond"
msgstr "Fed"
#: src/main/print-pcl.c:159
msgid "Premium"
msgstr "Premium"
#: src/main/print-pcl.c:160
msgid "Glossy Photo"
msgstr "Blankt foto"
#: src/main/print-pcl.c:161
msgid "Transparency"
msgstr "Transparent"
#: src/main/print-pcl.c:162
msgid "Quick-dry Photo"
msgstr "Hurtig tørrende foto"
#: src/main/print-pcl.c:163
msgid "Quick-dry Transparency"
msgstr "Hurtig tørrende transparent"
#: src/main/print-pcl.c:203 src/main/print-util.c:557
msgid "Manual"
msgstr "Manuelt"
#. {"Envelope", PCL_PAPERSOURCE_ENVELOPE},
#: src/main/print-pcl.c:205
msgid "Tray 1"
msgstr "Bakke 1"
#: src/main/print-pcl.c:206 src/main/print-pcl.c:212
msgid "Tray 2"
msgstr "Bakke 2"
#: src/main/print-pcl.c:207
msgid "Tray 3"
msgstr "Bakke3"
#: src/main/print-pcl.c:208
msgid "Tray 4"
msgstr "Bakke 4"
#: src/main/print-pcl.c:209
#, fuzzy
msgid "Portable Sheet Feeder"
msgstr "Valgfri ark føder"
#: src/main/print-pcl.c:210
msgid "Desktop Sheet Feeder"
msgstr "Indbygget ark føder"
#: src/main/print-pcl.c:211
msgid "Tray"
msgstr "Bakke"
#: src/main/print-pcl.c:213
msgid "Optional Source"
msgstr "Anden kilde"
#: src/main/print-pcl.c:214
msgid "Autoselect"
msgstr "Automatisk udvælgelse"
#: src/main/print-pcl.c:228
msgid "150x150 DPI"
msgstr "150x150 DPI"
#: src/main/print-pcl.c:229
msgid "300x300 DPI"
msgstr "300x300 DPI"
#: src/main/print-pcl.c:230
msgid "600x300 DPI"
msgstr "600x300 DPI"
#: src/main/print-pcl.c:231
msgid "600x600 DPI monochrome"
msgstr "600x600 DPI monokrom"
#: src/main/print-pcl.c:232
msgid "600x600 DPI"
msgstr "600x600 DPI"
#: src/main/print-pcl.c:233
msgid "1200x600 DPI"
msgstr "1200x600 DPI"
#: src/main/print-pcl.c:234
msgid "2400x600 DPI"
msgstr "2400x600 DPI"
#: src/main/print-pcl.c:1737
msgid "Color + Black Cartridges"
msgstr "Farve + sort patroner"
#: src/main/print-pcl.c:1738
msgid "Color + Photo Cartridges"
msgstr "Farve + foto patroner"
#. Name of file or command to print to
#: src/main/print-util.c:127 src/main/print-util.c:163
#: src/main/print-util.c:199
msgid "ps2"
msgstr "ps2"
#. Common imperial page sizes
#: src/main/print-util.c:533
msgid "Letter"
msgstr "Letter"
#. 8.5in x 11in
#: src/main/print-util.c:535
msgid "Legal"
msgstr "Legal"
#. 8.5in x 14in
#: src/main/print-util.c:537
msgid "Tabloid"
msgstr "Tabloid"
#. 11in x 17in
#: src/main/print-util.c:539
msgid "Executive"
msgstr "Executive"
#. 100mm x 147mm
#: src/main/print-util.c:543
msgid "3x5"
msgstr "3x5"
#: src/main/print-util.c:545
msgid "4x6"
msgstr "4x6"
#: src/main/print-util.c:547
msgid "Epson 4x6 Photo Paper"
msgstr "Epson 4x6 foto papir"
#: src/main/print-util.c:549
msgid "5x7"
msgstr "5x7"
#: src/main/print-util.c:551
msgid "5x8"
msgstr "5x8"
#: src/main/print-util.c:553
msgid "6x8"
msgstr "6x8"
#: src/main/print-util.c:555
msgid "8x10"
msgstr "8x10"
#. 5.5in x 8.5in
#: src/main/print-util.c:559
msgid "12x18"
msgstr "12x18"
#: src/main/print-util.c:561
msgid "Super B 13x19"
msgstr "Super B 13x19"
#: src/main/print-util.c:563
msgid "Engineering C 17x22"
msgstr ""
#. Other common photographic paper sizes
#: src/main/print-util.c:567
msgid "8x12"
msgstr "8x12"
#. Sometimes used for 35 mm
#: src/main/print-util.c:569
msgid "11x14"
msgstr "11x14"
#: src/main/print-util.c:571
msgid "16x20"
msgstr "16x20"
#: src/main/print-util.c:573
msgid "16x24"
msgstr "16x24"
#. 20x24 for 35 mm
#: src/main/print-util.c:575
msgid "20x24"
msgstr "20x24"
#: src/main/print-util.c:577
msgid "20x30"
msgstr "20x30"
#. 24x30 for 35 mm
#: src/main/print-util.c:579
msgid "22x30"
msgstr "22x30"
#. Common watercolor paper
#: src/main/print-util.c:581
msgid "24x30"
msgstr "24x30"
#: src/main/print-util.c:583
msgid "24x36"
msgstr "24x36"
#. Sometimes used for 35 mm
#: src/main/print-util.c:585
msgid "30x40"
msgstr "30x40"
#. International Paper Sizes (mostly taken from BS4000:1968)
#.
#. * "A" series: Paper and boards, trimmed sizes
#. *
#. * "A" sizes are in the ratio 1 : sqrt(2). A0 has a total area
#. * of 1 square metre. Everything is rounded to the nearest
#. * millimetre. Thus, A0 is 841mm x 1189mm. Every other A
#. * size is obtained by doubling or halving another A size.
#.
#: src/main/print-util.c:598
msgid "4A"
msgstr "4A"
#. 1682mm x 2378mm
#: src/main/print-util.c:600
msgid "2A"
msgstr "2A"
#. 1189mm x 1682mm
#: src/main/print-util.c:602
msgid "A0"
msgstr "A0"
#. 841mm x 1189mm
#: src/main/print-util.c:604
msgid "A1"
msgstr "A1"
#. 594mm x 841mm
#: src/main/print-util.c:606
msgid "A2"
msgstr "A2"
#. 420mm x 594mm
#: src/main/print-util.c:608
msgid "A3"
msgstr "A3"
#. 297mm x 420mm
#: src/main/print-util.c:610
msgid "A4"
msgstr "A4"
#. 210mm x 297mm
#: src/main/print-util.c:612
msgid "A5"
msgstr "A5"
#. 148mm x 210mm
#: src/main/print-util.c:614
msgid "A6"
msgstr "A6"
#. 105mm x 148mm
#: src/main/print-util.c:616
msgid "A7"
msgstr "A7"
#. 74mm x 105mm
#: src/main/print-util.c:618
msgid "A8"
msgstr "A8"
#. 52mm x 74mm
#: src/main/print-util.c:620
msgid "A9"
msgstr "A9"
#. 37mm x 52mm
#: src/main/print-util.c:622
msgid "A10"
msgstr "A10"
#. 26mm x 37mm
#.
#. * Stock sizes for normal trims.
#. * Allowance for trim is 3 millimetres.
#.
#: src/main/print-util.c:629
msgid "RA0"
msgstr "RA0"
#. 860mm x 1220mm
#: src/main/print-util.c:631
msgid "RA1"
msgstr "RA1"
#. 610mm x 860mm
#: src/main/print-util.c:633
msgid "RA2"
msgstr "RA2"
#. 430mm x 610mm
#: src/main/print-util.c:635
msgid "RA3"
msgstr "RA3"
#. 305mm x 430mm
#: src/main/print-util.c:637
msgid "RA4"
msgstr "RA4"
#. 215mm x 305mm
#.
#. * Stock sizes for bled work or extra trims.
#.
#: src/main/print-util.c:643
msgid "SRA0"
msgstr "SRA0"
#. 900mm x 1280mm
#: src/main/print-util.c:645
msgid "SRA1"
msgstr "SRA1"
#. 640mm x 900mm
#: src/main/print-util.c:647
msgid "SRA2"
msgstr "SRA2"
#. 450mm x 640mm
#: src/main/print-util.c:649
msgid "SRA3"
msgstr "SRA3"
#. 320mm x 450mm
#: src/main/print-util.c:651
msgid "SRA4"
msgstr "SRA4"
#. 225mm x 320mm
#.
#. * "B" series: Posters, wall charts and similar items.
#.
#: src/main/print-util.c:657
msgid "4B ISO"
msgstr "4B ISO"
#. 2000mm x 2828mm
#: src/main/print-util.c:659
msgid "2B ISO"
msgstr "2B ISO"
#. 1414mm x 2000mm
#: src/main/print-util.c:661
msgid "B0 ISO"
msgstr "B0 ISO"
#. 1000mm x 1414mm
#: src/main/print-util.c:663
msgid "B1 ISO"
msgstr "B1 ISO"
#. 707mm x 1000mm
#: src/main/print-util.c:665
msgid "B2 ISO"
msgstr "B2 ISO"
#. 500mm x 707mm
#: src/main/print-util.c:667
msgid "B3 ISO"
msgstr "B3 ISO"
#. 353mm x 500mm
#: src/main/print-util.c:669
msgid "B4 ISO"
msgstr "B4 ISO"
#. 250mm x 353mm
#: src/main/print-util.c:671
msgid "B5 ISO"
msgstr "B5 ISO"
#. 176mm x 250mm
#: src/main/print-util.c:673
msgid "B6 ISO"
msgstr "B6 ISO"
#. 125mm x 176mm
#: src/main/print-util.c:675
msgid "B7 ISO"
msgstr "B7 ISO"
#. 88mm x 125mm
#: src/main/print-util.c:677
msgid "B8 ISO"
msgstr "B8 ISO"
#. 62mm x 88mm
#: src/main/print-util.c:679
msgid "B9 ISO"
msgstr "B9 ISO"
#. 44mm x 62mm
#: src/main/print-util.c:681
msgid "B10 ISO"
msgstr "B10 ISO"
#. 31mm x 44mm
#: src/main/print-util.c:684
msgid "B0 JIS"
msgstr "B0 JIS"
#: src/main/print-util.c:686
msgid "B1 JIS"
msgstr "B1 JIS"
#: src/main/print-util.c:688
msgid "B2 JIS"
msgstr "B2 JIS"
#: src/main/print-util.c:690
msgid "B3 JIS"
msgstr "B3 JIS"
#: src/main/print-util.c:692
msgid "B4 JIS"
msgstr "B4 JIS"
#: src/main/print-util.c:694
msgid "B5 JIS"
msgstr "B5 JIS"
#: src/main/print-util.c:696
msgid "B6 JIS"
msgstr "B6 JIS"
#: src/main/print-util.c:698
msgid "B7 JIS"
msgstr "B7 JIS"
#: src/main/print-util.c:700
msgid "B8 JIS"
msgstr "B8 JIS"
#: src/main/print-util.c:702
msgid "B9 JIS"
msgstr "B9 JIS"
#: src/main/print-util.c:704
msgid "B10 JIS"
msgstr "B10 JIS"
#.
#. * "C" series: Envelopes or folders suitable for A size stationery.
#.
#: src/main/print-util.c:710
msgid "C0"
msgstr "C0"
#. 917mm x 1297mm
#: src/main/print-util.c:712
msgid "C1"
msgstr "C1"
#. 648mm x 917mm
#: src/main/print-util.c:714
msgid "C2"
msgstr "C2"
#. 458mm x 648mm
#: src/main/print-util.c:716
msgid "C3"
msgstr "C3"
#. 324mm x 458mm
#: src/main/print-util.c:718
msgid "C4"
msgstr "C4"
#. 229mm x 324mm
#: src/main/print-util.c:720
msgid "C5"
msgstr "C5"
#. 162mm x 229mm
#: src/main/print-util.c:722
msgid "B6-C4"
msgstr "B6-C4"
#. 125mm x 324mm
#: src/main/print-util.c:724
msgid "C6"
msgstr "C6"
#. 114mm x 162mm
#: src/main/print-util.c:726
msgid "DL"
msgstr "DL"
#. 110mm x 220mm
#: src/main/print-util.c:728
msgid "C7-6"
msgstr "C7-6"
#. 81mm x 162mm
#: src/main/print-util.c:730
msgid "C7"
msgstr "C7"
#. 81mm x 114mm
#: src/main/print-util.c:732
msgid "C8"
msgstr "C8"
#. 57mm x 81mm
#: src/main/print-util.c:734
msgid "C9"
msgstr "C9"
#. 40mm x 57mm
#: src/main/print-util.c:736
msgid "C10"
msgstr "C10"
#. 28mm x 40mm
#.
#. * US CAD standard paper sizes
#.
#: src/main/print-util.c:742
msgid "ArchA"
msgstr "ArchA"
#: src/main/print-util.c:744
msgid "ArchA Transverse"
msgstr "ArchA Tværformat"
#: src/main/print-util.c:746
msgid "ArchB"
msgstr "ArchB"
#: src/main/print-util.c:748
msgid "ArchB Transverse"
msgstr "ArchB Tværformat"
#: src/main/print-util.c:750
msgid "ArchC"
msgstr "ArchC"
#: src/main/print-util.c:752
msgid "ArchC Transverse"
msgstr "ArchC Tværformat"
#: src/main/print-util.c:754
msgid "ArchD"
msgstr "ArchD"
#: src/main/print-util.c:756
msgid "ArchD Transverse"
msgstr "ArchD Tværformat"
#: src/main/print-util.c:758
msgid "ArchE"
msgstr "ArchE"
#: src/main/print-util.c:760
msgid "ArchE Transverse"
msgstr "ArchE Tværformat"
#.
#. * Foolscap
#.
#: src/main/print-util.c:766
msgid "American foolscap"
msgstr "Amerikansk folio"
#. American foolscap
#: src/main/print-util.c:768
msgid "European foolscap"
msgstr "Europæisk folio"
#. European foolscap
#.
#. * Sizes for book production
#. * The BPIF and the Publishers Association jointly recommend ten
#. * standard metric sizes for case-bound titles as follows:
#.
#: src/main/print-util.c:776
msgid "Crown Quarto"
msgstr "Krone kvartformat"
#. 189mm x 246mm
#: src/main/print-util.c:778
msgid "Large Crown Quarto"
msgstr "Stort krone kvartformat"
#. 201mm x 258mm
#: src/main/print-util.c:780
msgid "Demy Quarto"
msgstr "Demy kvartformat"
#. 219mm x 276mm
#: src/main/print-util.c:782
msgid "Royal Quarto"
msgstr "Royal kvartformat"
#. 237mm x 312mm
#. { "ISO A4", 595,
#. 841, PAPERSIZE_METRIC, 0, 0, 0, 0 }, 210mm x 297mm
#: src/main/print-util.c:786
msgid "Crown Octavo"
msgstr "Krone oktavformat"
#. 123mm x 186mm
#: src/main/print-util.c:788
msgid "Large Crown Octavo"
msgstr "Stort krone oktavformat"
#. 129mm x 198mm
#: src/main/print-util.c:790
msgid "Demy Octavo"
msgstr "Demy oktavformat"
#. 138mm x 216mm
#: src/main/print-util.c:792
msgid "Royal Octavo"
msgstr "Royal oktavformat"
#. 156mm x 234mm
#. { N_ ("ISO A5"), 419,
#. 595, 0, 0, 0, 0, PAPERSIZE_METRIC }, 148mm x 210mm
#. Paperback sizes in common usage
#: src/main/print-util.c:798
msgid "Small paperback"
msgstr "Lille paperback"
#. 111mm x 178mm
#: src/main/print-util.c:800
msgid "Penguin small paperback"
msgstr "Penguin lille paperback"
#. 111mm x 181mm
#: src/main/print-util.c:802
msgid "Penguin large paperback"
msgstr "Penguin stor paperback"
#. 129mm x 198mm
#. Miscellaneous sizes
#: src/main/print-util.c:806
msgid "10cm x 15cm"
msgstr ""
#. 100 x 150 mm
#: src/main/print-util.c:808
msgid "Hagaki Card"
msgstr "Hagaki kort"
#. 100 x 148 mm
#: src/main/print-util.c:810
msgid "Oufuku Card"
msgstr "Oufuku kort"
#. 148 x 200 mm
#: src/main/print-util.c:812
msgid "Japanese long envelope #3"
msgstr "Japansk lang kuvert #3"
#. Japanese long envelope #3
#: src/main/print-util.c:814
msgid "Japanese long envelope #4"
msgstr "Japansk lang kuvert #4"
#. Japanese long envelope #4
#: src/main/print-util.c:816
msgid "Japanese Kaku envelope #4"
msgstr "Japansk Kaku kuvert #4"
#. Japanese Kaku envelope #4
#: src/main/print-util.c:818
msgid "Commercial 10"
msgstr "Commercial 10"
#. US Commercial 10 env
#: src/main/print-util.c:820
msgid "A2 Invitation"
msgstr "A2 Invitation"
#. US A2 invitation
#: src/main/print-util.c:822
msgid "Monarch Envelope"
msgstr "Monarch kuvert"
#. Monarch envelope (3.875 * 7.5)
#: src/main/print-util.c:824
msgid "Custom"
msgstr "Egendefineret"
#: src/main/print-util.c:827
msgid "89 mm Roll Paper"
msgstr "89 mm papirrulle"
#: src/main/print-util.c:829
msgid "4 Inch Roll Paper"
msgstr "4 tommer papirrulle"
#: src/main/print-util.c:831
msgid "5 Inch Roll Paper"
msgstr "5 tommer papirrulle"
#: src/main/print-util.c:833
msgid "210 mm Roll Paper"
msgstr "210 mm papirrulle"
#: src/main/print-util.c:835
msgid "13 Inch Roll Paper"
msgstr "13 tommer papirrulle"
#: src/main/print-util.c:837
msgid "22 Inch Roll Paper"
msgstr "22 tommer papirrulle"
#: src/main/print-util.c:839
msgid "24 Inch Roll Paper"
msgstr "24 tommer papirrulle"
#: src/main/print-util.c:841
msgid "36 Inch Roll Paper"
msgstr "36 tommer papirrulle"
#: src/main/print-util.c:843
msgid "44 Inch Roll Paper"
msgstr "44 tommer papirrulle"
#: src/main/print-util.c:1324 src/main/print-util.c:1333
#, c-format
msgid "%s is not a valid parameter of type %s\n"
msgstr "%s er ikke en gyldig parameter af typen %s\n"
#: src/main/print-util.c:1349
#, c-format
msgid "%s out of range (value %f, min %f, max %f)\n"
msgstr "%s uden for område (værdi %f, min %f, max %f)\n"
#: src/main/print-util.c:1364
#, c-format
msgid "%s out of range (value %d, min %d, max %d)\n"
msgstr "%s uden for område (værdi %d, min %d, max %d)\n"
#: src/main/print-util.c:1390
msgid "Printer does not support color output\n"
msgstr "Printer understøtter ikke farveudskrift\n"
#: src/main/print-util.c:1408
msgid "Image size is not valid\n"
msgstr "Billedstørrelse er ikke gyldig\n"
#: src/main/print-util.c:1415
msgid "Top margin must not be less than zero\n"
msgstr "Top margin må ikke være mindre end nul\n"
#: src/main/print-util.c:1421
msgid "Left margin must not be less than zero\n"
msgstr "Venstre margin må ikke være mindre end nul\n"
#: src/main/print-util.c:1478
#, c-format
msgid "%s is not a valid dither algorithm\n"
msgstr "%s er ikke en gyldig dither algoritm\n"
#. Specify language of PPD translation
#. Translators: Specify the language of the PPD translation.
#. * Use the English name of your language here, e.g. "Swedish" instead of
#. * "Svenska".
#.
#: src/cups/genppd.c:482
msgid "English"
msgstr "Danish"
#. Specify PPD translation encoding e.g. ISOLatin1
#: src/cups/genppd.c:484
msgid "ISOLatin1"
msgstr "ISOLatin1"
#: src/cups/genppd.c:745
msgid "Media Type"
msgstr "Medium type"
#: src/cups/genppd.c:771
msgid "Media Source"
msgstr "Medium kilde"
#: src/cups/genppd.c:795
msgid "Resolution"
msgstr "Opløsning"
#: src/cups/genppd.c:830
#, fuzzy
msgid "GIMP-print"
msgstr "Udskriv"
#.
#. * Image types...
#.
#: src/cups/genppd.c:837
msgid "Image Type"
msgstr "Billede type"
#: src/cups/genppd.c:842 src/gimp/gimp_main_window.c:1314
msgid "Line Art"
msgstr "Linje-kunst"
#: src/cups/genppd.c:844 src/gimp/gimp_main_window.c:1328
msgid "Solid Colors"
msgstr "Rene farver"
#: src/cups/genppd.c:846 src/gimp/gimp_main_window.c:1343
msgid "Photograph"
msgstr "Fotografi"
#.
#. * Dithering algorithms...
#.
#: src/cups/genppd.c:854
msgid "Dither Algorithm"
msgstr "Dither Algorithm"
#: src/cups/genppd.c:873
msgid "Ink Type"
msgstr "Blæk type"
#: src/escputil/escputil.c:66
msgid "Escputil version "
msgstr "Escputil version "
#: src/escputil/escputil.c:67
msgid ""
", Copyright (C) 2000-2001 Robert Krawitz\n"
"Escputil comes with ABSOLUTELY NO WARRANTY; for details type 'escputil -l'\n"
"This is free software, and you are welcome to redistribute it\n"
"under certain conditions; type 'escputil -l' for details.\n"
msgstr ""
", Copyright (C) 2000-2001 Robert Krawitz\n"
"Escputil kommer uden NOGEN FORMER FOR GARANTI; for detaljer skriv 'escputil -"
"l'\n"
"Dette er fri software, og du er velkommen til at redistribuere det\n"
"under bestemte betingelser, skriv 'escputil -l' for detaljer.\n"
#: src/escputil/escputil.c:72
msgid ""
"Copyright 2000 Robert Krawitz (rlk@alum.mit.edu)\n"
"\n"
"This program is free software; you can redistribute it and/or modify it\n"
"under the terms of the GNU General Public License as published by the Free\n"
"Software Foundation; either version 2 of the License, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful, but\n"
"WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY\n"
"or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License\n"
"for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
"Copyright 2000 Robert Krawitz (rlk@alum.mit.edu)\n"
"\n"
"Dette program er fri software, du er velkommen til at redistribuere det\n"
"og/eller ændre det, under betingelserne for GNU General Public License\n"
"som publiceret af the Free Software Foundation; enten version 2 af "
"licensen,\n"
"eller (efter eget valg) enhver senere version.\n"
"\n"
"Dette program er distribueret i det håb, at det vil være nyttigt, men\n"
"UDEN ENHVER FOR FOR GARANTI, endda uden den underforståede\n"
"garanti for SALGBARHED, eller EGNETHED FOR ET BESTEMT FORMÅL\n"
"Se GNU General Public License for yderligere detaljer.\n"
"\n"
"Du skulle have modtaget en kopi af GNU General Public License sammen\n"
"med dette program. Hvis ikke, skriv da til Free Software Foundation, Inc .,\n"
"59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
#: src/escputil/escputil.c:112
msgid ""
"Usage: escputil [-c | -n | -a | -i | -o | -s | -d | -l | -M]\n"
" [-P printer | -r device] [-u] [-q] [-m model]\n"
"Perform maintenance on EPSON Stylus (R) printers.\n"
"Examples: escputil --clean-head --printer stpex-on-third-floor\n"
" escputil --ink-level --new --raw-device /dev/lp0\n"
"\n"
" Commands:\n"
" -c|--clean-head Clean the print head.\n"
" -n|--nozzle-check Print a nozzle test pattern.\n"
" Dirty or clogged nozzles will show as gaps in the\n"
" pattern. If you see any gaps, you should clean\n"
" the print head.\n"
" -a|--align-head Align the print head. CAUTION: Misuse of this\n"
" utility may result in poor print quality and/or\n"
" damage to the printer.\n"
" -o|--align-color Align the color print head (Stylus Color 480 and 580\n"
" only). CAUTION: Misuse of this utility may result "
"in\n"
" poor print quality and/or damage to the printer.\n"
" -s|--status Retrieve printer status.\n"
" -i|--ink-level Obtain the ink level from the printer. This "
"requires\n"
" read/write access to the raw printer device.\n"
" -d|--identify Query the printer for make and model information.\n"
" This requires read/write access to the raw printer\n"
" device.\n"
" -l|--license Display the license/warranty terms of this program.\n"
" -M|--list-models List the available printer models.\n"
" -h|--help Print this help message.\n"
" Options:\n"
" -P|--printer-name Specify the name of the printer queue to operate on.\n"
" Default is the default system printer.\n"
" -r|--raw-device Specify the name of the device to write to directly\n"
" rather than going through a printer queue.\n"
" -u|--new The printer is a new printer (Stylus Color 740 or\n"
" newer).\n"
" -q|--quiet Suppress the banner.\n"
" -m|--model Specify the precise printer model for head "
"alignment.\n"
msgstr ""
"Brug: escputil [-c | -n | -a | -i | -o | -s | -d | -l | -M]\n"
" [-P printer | -r enhed] [-u] [-q] [-m model]\n"
"Udfør vedligeholdelse på EPSON Stylus (R) printere.\n"
"Eksempler: escputil --clean-head --printer stpex-på-tredie-etage\n"
" escputil --ink-level --new --raw-device /dev/lp0\n"
"\n"
" Kommandoer:\n"
" -c|--clean-head Renser print hoved.\n"
" -n|--nozzle-check Printer en dyse test.\n"
" Beskidte eller stoppede dyser viser sig som huller i\n"
" mønsteret. Hvis der er huller, bør du rense\n"
" print hovedet.\n"
" -a|--align-head Retter printhovedet ind. FORSIGTIG unødig "
"brug\n"
" af denne funktion kan resultere i dårlig "
"printkvalitet, eller\n"
" forårsage direkte skade på printeren.\n"
" -o|--align-color Retter farve printhovedet ind (Kun for Stylus Color "
"480\n"
" og 580). FORSIGTIG unødig brug af denne funktion\n"
" kan resultere i dårlig printkvalitet, eller "
"forårsage\n"
" direkte skade på printeren.\n"
" -s|--status Viser printer status.\n"
" -i|--ink-level Henter blæk niveau fra printeren. Dette kræver\n"
" direkte læse/skrive adgang til printeren.\n"
" -d|--identify Forespørger printer om fremstiller og model.Dette\n"
" kræver direkte læse/skrive adgang til printeren.\n"
" -l|--license Viser licens/garanti bestemmelser for dette program.\n"
" -M|--list-models Lister de tilgængelige printer modeller.\n"
" -h|--help Printer denne hjælpe meddelelse.\n"
" Flag:\n"
" -P|--printer-name Specificer den valgte printer kø.\n"
" Uden angivelse = system printeren lp.\n"
" -r|--raw-device Specificer navnet på den enhed der skrives til "
"direkte\n"
" i stedet for at gå gennem en printer kø.\n"
" -u|--new Printeren er ny (Stylus Color 740 eller nyere).\n"
" -q|--quiet Undertrykker banneret.\n"
" -m|--model Specificer den præcise printer model til brug for\n"
" indretning af printhoved (alignment).\n"
#: src/escputil/escputil.c:150
msgid ""
"Usage: escputil [OPTIONS] [COMMAND]\n"
"Usage: escputil [-c | -n | -a | -i | -o | -s | -d | -l | -M]\n"
" [-P printer | -r device] [-u] [-q] [-m model]\n"
"Perform maintenance on EPSON Stylus (R) printers.\n"
"Examples: escputil -c -P stpex-on-third-floor\n"
" escputil -i -u -r /dev/lp0\n"
"\n"
" Commands:\n"
" -c Clean the print head.\n"
" -n Print a nozzle test pattern.\n"
" Dirty or clogged nozzles will show as gaps in the\n"
" pattern. If you see any gaps, you should clean\n"
" the print head.\n"
" -a Align the print head. CAUTION: Misuse of this\n"
" utility may result in poor print quality and/or\n"
" damage to the printer.\n"
" -o Align the color print head (Stylus Color 480 and 580\n"
" only). CAUTION: Misuse of this utility may result in\n"
" poor print quality and/or damage to the printer.\n"
" -s Retrieve printer status.\n"
" -i Obtain the ink level from the printer. This requires\n"
" read/write access to the raw printer device.\n"
" -d Query the printer for make and model information. This\n"
" requires read/write access to the raw printer device.\n"
" -l Display the license/warranty terms of this program.\n"
" -M List the available printer models.\n"
" -h Print this help message.\n"
" Options:\n"
" -P Specify the name of the printer queue to operate on.\n"
" Default is the default system printer.\n"
" -r Specify the name of the device to write to directly\n"
" rather than going through a printer queue.\n"
" -u The printer is a new printer (Stylus Color 740 or newer).\n"
" -q Suppress the banner.\n"
" -m Specify the precise printer model for head alignment.\n"
msgstr ""
"Anvendelse: escputil [flag] [kommando]\n"
"Anvendelse: escputil [-c | -n | -a | -i | -o | -s | -d | -l | -M]\n"
" [-P printer | -r enhed] [-u] [-q] [-m model]\n"
"Udfør vedligeholdelse på EPSON Stylus (R) printere.\n"
"Eksempler: escputil -c -P stpex-på tredie etage\n"
" escputil -i -u -r /dev/lp0\n"
"\n"
"Kommandoer:\n"
" -c Rens print hovedet.\n"
" -n Print et dyse test mønster.\n"
" Beskidte eller stoppede dyser vil vise sig som huller i\n"
" mønsteret. Hvis der er huller,bør du rense print hovedet\n"
" -a Ret printhovedet ind. FORSIGTIG: Forkert brug af denne\n"
" funktion kan resultere i dårlige print kvalitet og/eller\n"
" beskadigelse af printeren (alignement).\n"
" -o Retter farve printhovedet ind (Kun for Stylus Color 480\n"
" og 580). FORSIGTIG unødig brug af denne funktion\n"
" kan resultere i dårlig printkvalitet, eller forårsage\n"
" direkte skade på printeren.\n"
" -s Viser printer status.\n"
" -i Henter blæk niveau fra printeren. Dette kræver\n"
" direkte læse/skrive adgang til printeren.\n"
" -d Forespørger printer om fremstiller og model.Dette\n"
" kræver direkte læse/skrive adgang til printeren.\n"
" -l Viser licens/garanti bestemmelser for dette program.\n"
" -M Lister de tilgængelige printer modeller.\n"
" -h Printer denne hjælpe meddelelse.\n"
" Flag:\n"
" -P Specificer den valgte printer kø.\n"
" Standard = system printeren.\n"
" -r Specificer navnet på den enhed der skrives til direkte\n"
" i stedet for at gå gennem en printer kø.\n"
" -u Printeren er en ny printer (Stylus Color 740 eller nyere).\n"
" -q Undertrykker banneret.\n"
" -m Specificer den præcise printer model til brug for\n"
" indretning af printhoved (alignment).\n"
#: src/escputil/escputil.c:201
msgid "Stylus C20sx"
msgstr "Stylus C20sx"
#: src/escputil/escputil.c:202
msgid "Stylus C20ux"
msgstr "Stylus C20ux"
#: src/escputil/escputil.c:203
msgid "Stylus C40sx"
msgstr "Stylus C40sx"
#: src/escputil/escputil.c:204
msgid "Stylus C40ux"
msgstr "Stylus C40ux"
#: src/escputil/escputil.c:205
msgid "Stylus C41sx"
msgstr "Stylus C41sx"
#: src/escputil/escputil.c:206
msgid "Stylus C41ux"
msgstr "Stylus C41ux"
#: src/escputil/escputil.c:207
msgid "Stylus C42sx"
msgstr "Stylus C42sx"
#: src/escputil/escputil.c:208
msgid "Stylus C42ux"
msgstr "Stylus C42ux"
#: src/escputil/escputil.c:209
#, fuzzy
msgid "Stylus C43sx"
msgstr "Stylus C42sx"
#: src/escputil/escputil.c:210
#, fuzzy
msgid "Stylus C43ux"
msgstr "Stylus C42ux"
#: src/escputil/escputil.c:211
#, fuzzy
msgid "Stylus C44sx"
msgstr "Stylus C42sx"
#: src/escputil/escputil.c:212
#, fuzzy
msgid "Stylus C44ux"
msgstr "Stylus C42ux"
#: src/escputil/escputil.c:213
#, fuzzy
msgid "Stylus C50"
msgstr "Stylus C60"
#: src/escputil/escputil.c:214
msgid "Stylus C60"
msgstr "Stylus C60"
#: src/escputil/escputil.c:215
msgid "Stylus C61"
msgstr "Stylus C61"
#: src/escputil/escputil.c:216
msgid "Stylus C62"
msgstr "Stylus C62"
#: src/escputil/escputil.c:217
#, fuzzy
msgid "Stylus C63"
msgstr "Stylus C60"
#: src/escputil/escputil.c:218
#, fuzzy
msgid "Stylus C64"
msgstr "Stylus C60"
#: src/escputil/escputil.c:219
msgid "Stylus C70"
msgstr "Stylus C70"
#: src/escputil/escputil.c:220
msgid "Stylus C80"
msgstr "Stylus C80"
#: src/escputil/escputil.c:221
msgid "Stylus C82"
msgstr "Stylus C82"
#: src/escputil/escputil.c:222
#, fuzzy
msgid "Stylus C83"
msgstr "Stylus C80"
#: src/escputil/escputil.c:223
#, fuzzy
msgid "Stylus C84"
msgstr "Stylus C80"
#: src/escputil/escputil.c:224
msgid "Stylus Color"
msgstr "Stylus Color"
#: src/escputil/escputil.c:225
msgid "Stylus Color Pro"
msgstr "Stylus Color Pro"
#: src/escputil/escputil.c:226
msgid "Stylus Color Pro XL"
msgstr "Stylus Color Pro XL"
#: src/escputil/escputil.c:227
msgid "Stylus Color 400"
msgstr "Stylus Color 400"
#: src/escputil/escputil.c:228
msgid "Stylus Color 440"
msgstr "Stylus Color 440"
#: src/escputil/escputil.c:229
msgid "Stylus Color 460"
msgstr "Stylus Color 460"
#: src/escputil/escputil.c:230
msgid "Stylus Color 480"
msgstr "Stylus Color 480"
#: src/escputil/escputil.c:231
msgid "Stylus Color 500"
msgstr "Stylus Color 500"
#: src/escputil/escputil.c:232
msgid "Stylus Color 580"
msgstr "Stylus Color 580"
#: src/escputil/escputil.c:233
msgid "Stylus Color 600"
msgstr "Stylus Color 600"
#: src/escputil/escputil.c:234
msgid "Stylus Color 640"
msgstr "Stylus Color 640"
#: src/escputil/escputil.c:235
msgid "Stylus Color 660"
msgstr "Stylus Color 660"
#: src/escputil/escputil.c:236
msgid "Stylus Color 670"
msgstr "Stylus Color 670"
#: src/escputil/escputil.c:237
msgid "Stylus Color 680"
msgstr "Stylus Color 680"
#: src/escputil/escputil.c:238
msgid "Stylus Color 740"
msgstr "Stylus Color 740"
#: src/escputil/escputil.c:239
msgid "Stylus Color 760"
msgstr "Stylus Color 760"
#: src/escputil/escputil.c:240
msgid "Stylus Color 777"
msgstr "Stylus Color 777"
#: src/escputil/escputil.c:241
msgid "Stylus Color 800"
msgstr "Stylus Color 800"
#: src/escputil/escputil.c:242
msgid "Stylus Color 850"
msgstr "Stylus Color 850"
#: src/escputil/escputil.c:243
msgid "Stylus Color 860"
msgstr "Stylus Color 860"
#: src/escputil/escputil.c:244
msgid "Stylus Color 880"
msgstr "Stylus Color 880"
#: src/escputil/escputil.c:245
msgid "Stylus Color 83"
msgstr "Stylus Color 83"
#: src/escputil/escputil.c:246
msgid "Stylus Color 900"
msgstr "Stylus Color 900"
#: src/escputil/escputil.c:247
msgid "Stylus Color 980"
msgstr "Stylus Color 980"
#: src/escputil/escputil.c:248
msgid "Stylus Color 1160"
msgstr "Stylus Color 1160"
#: src/escputil/escputil.c:249
msgid "Stylus Color 1500"
msgstr "Stylus Color 1500"
#: src/escputil/escputil.c:250
msgid "Stylus Color 1520"
msgstr "Stylus Color 1520"
#: src/escputil/escputil.c:251
msgid "Stylus Color 3000"
msgstr "Stylus Color 3000"
#: src/escputil/escputil.c:252
msgid "Stylus Photo"
msgstr "Stylus Photo"
#: src/escputil/escputil.c:253
msgid "Stylus Photo 700"
msgstr "Stylus Photo 700"
#: src/escputil/escputil.c:254
msgid "Stylus Photo EX"
msgstr "Stylus Photo EX"
#: src/escputil/escputil.c:255
msgid "Stylus Photo 720"
msgstr "Stylus Photo 720"
#: src/escputil/escputil.c:256
msgid "Stylus Photo 750"
msgstr "Stylus Photo 750"
#: src/escputil/escputil.c:257
msgid "Stylus Photo 780"
msgstr "Stylus Photo 780"
#: src/escputil/escputil.c:258
msgid "Stylus Photo 785"
msgstr "Stylus Photo 785"
#: src/escputil/escputil.c:259
msgid "Stylus Photo 790"
msgstr "Stylus Photo 790"
#: src/escputil/escputil.c:260
msgid "Stylus Photo 810"
msgstr "Stylus Photo 810"
#: src/escputil/escputil.c:261
msgid "Stylus Photo 820"
msgstr "Stylus Photo 820"
#: src/escputil/escputil.c:262
msgid "Stylus Photo 830"
msgstr "Stylus Photo 830"
#: src/escputil/escputil.c:263
msgid "Stylus Photo 870"
msgstr "Stylus Photo 870"
#: src/escputil/escputil.c:264
msgid "Stylus Photo 875"
msgstr "Stylus Photo 875"
#: src/escputil/escputil.c:265
msgid "Stylus Photo 890"
msgstr "Stylus Photo 890"
#: src/escputil/escputil.c:266
msgid "Stylus Photo 895"
msgstr "Stylus Photo 895"
#: src/escputil/escputil.c:267
msgid "Stylus Photo 915"
msgstr "Stylus Photo 915"
#: src/escputil/escputil.c:268
msgid "Stylus Photo 925"
msgstr "Stylus Photo 925"
#: src/escputil/escputil.c:269
msgid "Stylus Photo 950"
msgstr "Stylus Photo 950"
#: src/escputil/escputil.c:270
msgid "Stylus Photo 960"
msgstr "Stylus Photo 960"
#: src/escputil/escputil.c:271
msgid "Stylus Photo 1200"
msgstr "Stylus Photo 1200"
#: src/escputil/escputil.c:272
msgid "Stylus Photo 1270"
msgstr "Stylus Photo 1270"
#: src/escputil/escputil.c:273
msgid "Stylus Photo 1280"
msgstr "Stylus Photo 1280"
#: src/escputil/escputil.c:274
msgid "Stylus Photo 1290"
msgstr "Stylus Photo 1290"
#: src/escputil/escputil.c:275
msgid "Stylus Photo 2000P"
msgstr "Stylus Photo 2000P"
#: src/escputil/escputil.c:276
msgid "Stylus Photo 2100"
msgstr "Stylus Photo 2100"
#: src/escputil/escputil.c:277
msgid "Stylus Photo 2200"
msgstr "Stylus Photo 2200"
#: src/escputil/escputil.c:278
msgid "Stylus Pro 5000"
msgstr "Stylus Pro 5000"
#: src/escputil/escputil.c:279
msgid "Stylus Pro 5500"
msgstr "Stylus Pro 5500"
#: src/escputil/escputil.c:280
msgid "Stylus Pro 7000"
msgstr "Stylus Pro 7000"
#: src/escputil/escputil.c:281
msgid "Stylus Pro 7500"
msgstr "Stylus Pro 7500"
#: src/escputil/escputil.c:282
msgid "Stylus Pro 7600"
msgstr "Stylus Pro 7600"
#: src/escputil/escputil.c:283
msgid "Stylus Pro 9000"
msgstr "Stylus Pro 9000"
#: src/escputil/escputil.c:284
msgid "Stylus Pro 9500"
msgstr "Stylus Pro 9500"
#: src/escputil/escputil.c:285
msgid "Stylus Pro 9600"
msgstr "Stylus Pro 9600"
#: src/escputil/escputil.c:286
msgid "Stylus Pro 10000"
msgstr "Stylus Pro 10000"
#: src/escputil/escputil.c:287
msgid "Stylus Scan 2000"
msgstr "Stylus Scan 2000"
#: src/escputil/escputil.c:288
msgid "Stylus Scan 2500"
msgstr "Stylus Scan 2500"
#: src/escputil/escputil.c:289
#, fuzzy
msgid "Stylus CX-3100"
msgstr "Stylus C60"
#: src/escputil/escputil.c:290
#, fuzzy
msgid "Stylus CX-3200"
msgstr "Stylus C20sx"
#: src/escputil/escputil.c:291
#, fuzzy
msgid "Stylus CX-5100"
msgstr "Stylus C60"
#: src/escputil/escputil.c:292
#, fuzzy
msgid "Stylus CX-5200"
msgstr "Stylus C60"
#: src/escputil/escputil.c:293
#, fuzzy
msgid "Stylus CX-6300"
msgstr "Stylus C60"
#: src/escputil/escputil.c:294
#, fuzzy
msgid "Stylus CX-6400"
msgstr "Stylus C60"
#: src/escputil/escputil.c:295
#, fuzzy
msgid "Stylus CX-8300"
msgstr "Stylus C80"
#: src/escputil/escputil.c:296
#, fuzzy
msgid "Stylus CX-8400"
msgstr "Stylus C80"
#: src/escputil/escputil.c:383 src/escputil/escputil.c:392
msgid "You may only specify one printer or raw device."
msgstr "Du kan kun specificere en printer eller en ufiltreret enhed."
#: src/escputil/escputil.c:401
msgid "You may only specify one printer model."
msgstr "Du kan kun specificere en printer model."
#: src/escputil/escputil.c:421
#, c-format
msgid "Unknown option %c\n"
msgstr "Ukendt flag %c\n"
#: src/escputil/escputil.c:481
#, c-format
msgid "Cannot open device %s: %s\n"
msgstr "Kan ikke åbne enhed %s: %s\n"
#: src/escputil/escputil.c:504
#, c-format
msgid "Cannot print to printer %s with %s\n"
msgstr "Kan ikke udskrive til printer %s med %s\n"
#: src/escputil/escputil.c:517 src/escputil/escputil.c:527
msgid "Unable to send command to printer\n"
msgstr "Ikke i stand til at sende kommando til printer\n"
#: src/escputil/escputil.c:579
msgid "Read from printer timed out\n"
msgstr ""
#: src/escputil/escputil.c:581
#, c-format
msgid "Cannot read from %s: %s\n"
msgstr "Kan ikke læse fra %s: %s\n"
#: src/escputil/escputil.c:634
msgid "Cyan"
msgstr "Cyan"
#: src/escputil/escputil.c:635
msgid "Magenta"
msgstr "Magenta"
#: src/escputil/escputil.c:636
msgid "Yellow"
msgstr "Gul"
#: src/escputil/escputil.c:637
msgid "Light Cyan"
msgstr "Lys Cyan"
#: src/escputil/escputil.c:638
msgid "Light Magenta"
msgstr "Lys Magenta"
#: src/escputil/escputil.c:639
msgid "Black/Dark Yellow"
msgstr ""
#: src/escputil/escputil.c:653
msgid "Obtaining ink levels requires using a raw device.\n"
msgstr "Hentning af blæk mængder, kræver brug af en ufiltreret enhed.\n"
#: src/escputil/escputil.c:659 src/escputil/escputil.c:730
#: src/escputil/escputil.c:769
#, c-format
msgid "Cannot open %s read/write: %s\n"
msgstr "Kan ikke åbne %s læse/skrive: %s\n"
#: src/escputil/escputil.c:668 src/escputil/escputil.c:741
#: src/escputil/escputil.c:778
#, c-format
msgid "Cannot write to %s: %s\n"
msgstr "Kan ikke skrive til %s: %s\n"
#: src/escputil/escputil.c:681
msgid "Cannot parse output from printer\n"
msgstr "Kan ikke fortolke uddata fra printer.\n"
#: src/escputil/escputil.c:685
msgid "Ink color"
msgstr "Blæk farve"
#: src/escputil/escputil.c:685
msgid "Percent remaining"
msgstr "Procent tilbage"
#: src/escputil/escputil.c:724
msgid "Printer identification requires using a raw device.\n"
msgstr "Printer identifikation skal bruge en ufiltreret enhed.\n"
#: src/escputil/escputil.c:763
msgid "Printer status requires using a raw device.\n"
msgstr "Printer status skal bruge en ufiltreret enhed.\n"
#: src/escputil/escputil.c:802
msgid "Cleaning heads...\n"
msgstr "Renser hoveder...\n"
#: src/escputil/escputil.c:811
msgid "Running nozzle check, please ensure paper is in the printer.\n"
msgstr "Tester dyser, check om der er papir i printeren.\n"
#: src/escputil/escputil.c:815
#, c-format
msgid ""
"Please read these instructions very carefully before proceeding.\n"
"\n"
"This utility lets you align the print head of your Epson Stylus inkjet\n"
"printer. Misuse of this utility may cause your print quality to degrade\n"
"and possibly damage your printer. This utility has not been reviewed by\n"
"Seiko Epson for correctness, and is offered with no warranty at all. The\n"
"entire risk of using this utility lies with you.\n"
"\n"
"This utility prints %d test patterns. Each pattern looks very similar.\n"
"The patterns consist of a series of pairs of vertical lines that overlap.\n"
"Below each pair of lines is a number between %d and %d.\n"
"\n"
"When you inspect the pairs of lines, you should find the pair of lines that\n"
"is best in alignment, that is, that best forms a single vertical line.\n"
"Inspect the pairs very carefully to find the best match. Using a loupe\n"
"or magnifying glass is recommended for the most critical inspection.\n"
"It is also suggested that you use a good quality paper for the test,\n"
"so that the lines are well-formed and do not spread through the paper.\n"
"After picking the number matching the best pair, place the paper back in\n"
"the paper input tray before typing it in.\n"
"\n"
"Each pattern is similar, but later patterns use finer dots for more\n"
"critical alignment. You must run all of the passes to correctly align your\n"
"printer. After running all the alignment passes, the alignment\n"
"patterns will be printed once more. You should find that the middle-most\n"
"pair (#%d out of the %d) is the best for all patterns.\n"
"\n"
"After the passes are printed once more, you will be offered the\n"
"choices of (s)aving the result in the printer, (r)epeating the process,\n"
"or (q)uitting without saving. Quitting will not restore the previous\n"
"settings, but powering the printer off and back on will. If you quit,\n"
"you must repeat the entire process if you wish to later save the results.\n"
"It is essential that you not turn your printer off during this procedure.\n"
"\n"
msgstr ""
"Læs venligst disse instruktioner omhyggeligt før du fortsætter.\n"
"\n"
"Denne funktion lader dig rette print hovedet ind, på din Epson Stylus\n"
"inkjet printer. Forkert anvendelse af funktionen kan forårsage reduktion\n"
"i print kvalitet, og sandsynligvis skade din printer. Denne funktion er "
"ikke\n"
"blevet testet af Seiko Epson for korrekt funktion, og tilbydes uden nogen\n"
"former for garanti i det hele taget. Brug af funktionen er derfor på egen\n"
"regning og risiko.\n"
"\n"
"Denne funktion printer %d test mønstre. Hvert mønster ser ens ud.\n"
"Mønstrene består af en serie af lodrette liniepar der overlapper.\n"
"Under hvert liniepar er der et nummer mellem %d og %d.\n"
"\n"
"Når du undersøger linieparrene, skal du finde det liniepar, der er bedst\n"
"rettet ind, d.v.s. det par der bedst danner en ret linie.\n"
"Undersøg parrene meget omhyggeligt for at finde det bedste match. Det\n"
"anbefales at bruge en lup eller et forstørrelsesglas for at finde det bedste "
"par.\n"
"Det kan også anbefales at bruge et kvalitetspapir til testen, så linierne "
"er\n"
"præcist formede og ikke 'løber ud' i papiret.\n"
"Når du har valgt det flotteste par, og har noteret tallet under, lægges "
"papiret\n"
"i printeren igen, inden tallet indtastes.\n"
"\n"
"Hvert mønster er identisk, men senere mønstre anvender en finere dot\n"
"for en mere kritisk retten ind. Du skal køre alle gennemløbene for at opnå\n"
"en perfekt retten ind af din printer. Når du har kørt alle gennemløbene, "
"bliver\n"
"mønsteret printet igen. Nu skal det midterste af parrene (#%d ud af de %d)\n"
"være det bedste.\n"
"\n"
"Når dette er sket, har du mulighed for at gemme(s) resultatet i printeren,\n"
"gentage(r) processen, eller afbryde(q) uden at gemme. Når du afbryder,\n"
"bliver den hidtidige indstilling ikke genskabt, før der har været slukket "
"for\n"
"printeren. Det er derfor vigtigt at der ikke bliver slukket for printeren "
"mens\n"
"processen løber.\n"
"\n"
#: src/escputil/escputil.c:850
#, c-format
msgid ""
"Please read these instructions very carefully before proceeding.\n"
"\n"
"This utility lets you align the print head of your Epson Stylus inkjet\n"
"printer. Misuse of this utility may cause your print quality to degrade\n"
"and possibly damage your printer. This utility has not been reviewed by\n"
"Seiko Epson for correctness, and is offered with no warranty at all. The\n"
"entire risk of using this utility lies with you.\n"
"\n"
"This utility prints a test pattern that consist of a series of pairs of\n"
"vertical lines that overlap. Below each pair of lines is a number between\n"
"%d and %d.\n"
"\n"
"When you inspect the pairs of lines, you should find the pair of lines that\n"
"is best in alignment, that is, that best forms a single vertical align.\n"
"Inspect the pairs very carefully to find the best match. Using a loupe\n"
"or magnifying glass is recommended for the most critical inspection.\n"
"It is also suggested that you use a good quality paper for the test,\n"
"so that the lines are well-formed and do not spread through the paper.\n"
"After picking the number matching the best pair, place the paper back in\n"
"the paper input tray before typing it in.\n"
"\n"
"After running the alignment pattern, it will be printed once more. You\n"
"should find that the middle-most pair (#%d out of the %d) is the best.\n"
"You will then be offered the choices of (s)aving the result in the printer,\n"
"(r)epeating the process, or (q)uitting without saving. Quitting will not\n"
"restore the previous settings, but powering the printer off and back on "
"will.\n"
"If you quit, you must repeat the entire process if you wish to later save\n"
"the results. It is essential that you not turn off your printer during\n"
"this procedure.\n"
"\n"
msgstr ""
"Læs venligst disse instruktioner omhyggeligt før du fortsætter.\n"
"\n"
"Denne funktion lader dig rette print hovedet ind, på din Epson Stylus\n"
"inkjet printer. Forkert anvendelse af funktionen kan forårsage reduktion\n"
"i print kvalitet, og sandsynligvis skade din printer. Denne funktion er "
"ikke\n"
"blevet testet af Seiko Epson for korrekt funktion, og tilbydes uden nogen\n"
"former for garanti i det hele taget. Brug af funktionen er derfor på egen\n"
"regning og risiko.\n"
"\n"
"Denne funktion printer et test mønster der består af en serie af\n"
"lodrette liniepar der overlapper.\n"
"Under hvert liniepar er der et nummer mellem %d og %d.\n"
"\n"
"Når du undersøger linieparrene, skal du finde det liniepar, der er bedst\n"
"rettet ind, d.v.s. det par der bedst danner en ret linie.\n"
"Undersøg parrene meget omhyggeligt for at finde det bedste match. Det\n"
"anbefales at bruge en lup eller et forstørrelsesglas for at finde det bedste "
"par.\n"
"Det kan også anbefales at bruge et kvalitetspapir til testen, så linierne "
"er\n"
"præcist formede og ikke 'løber ud' i papiret.\n"
"Når du har valgt det flotteste par, og har noteret tallet under, lægges "
"papiret\n"
"i printeren igen, inden tallet indtastes.\n"
"\n"
"Når du har kørt rette ind mønsteret, bliver det printet igen. Nu skal det\n"
"midterste af parrene (#%d ud af de %d) være det bedste.\n"
"\n"
"Når dette er sket, har du mulighed for at gemme(s) resultatet i printeren,\n"
"gentage(r) processen, eller afbryde(q) uden at gemme. Når du afbryder,\n"
"bliver den hidtidige indstilling ikke genskabt, før der har været slukket "
"for\n"
"printeren. Det er derfor vigtigt at der ikke bliver slukket for printeren "
"mens\n"
"processen løber.\n"
"\n"
#: src/escputil/escputil.c:894
msgid "Unable to send command to the printer, exiting.\n"
msgstr "Ikke i stand til at sende kommando til printeren, afbryder.\n"
#: src/escputil/escputil.c:912
msgid ""
"Printer alignment must be done with a raw device or else\n"
"the -m option must be used to specify a printer.\n"
msgstr ""
"Retten printer hoved ind, skal udføres med en ufiltreret enhed, ellers\n"
"skal flaget -m sættes til at specificere en printer.\n"
#: src/escputil/escputil.c:916
msgid "Attempting to detect printer model..."
msgstr "Fersøger at detektere printer model..."
#: src/escputil/escputil.c:921
#, c-format
msgid ""
"\n"
"Cannot open %s read/write: %s\n"
msgstr ""
"\n"
"Kan ikke åbne %s læse/skrive: %s\n"
#: src/escputil/escputil.c:929
#, c-format
msgid ""
"\n"
"Cannot write to %s: %s\n"
msgstr ""
"\n"
"Kan ikke skrive til %s: %s\n"
#: src/escputil/escputil.c:945
msgid ""
"\n"
"Cannot detect printer type.\n"
"Please use -m to specify your printer model.\n"
msgstr ""
"\n"
"Kan ikke detektere printer type.\n"
"Brug -m for at specificere din printer model.\n"
#: src/escputil/escputil.c:962
#, c-format
msgid "Printer model %s is not known.\n"
msgstr "Printer model %s er ukendt.\n"
#: src/escputil/escputil.c:973
msgid ""
"Please inspect the final output very carefully to ensure that your\n"
"printer is in proper alignment. You may now:\n"
" (s)ave the results in the printer,\n"
" (q)uit without saving the results, or\n"
" (r)epeat the entire process from the beginning.\n"
"You will then be asked to confirm your choice.\n"
"What do you want to do (s, q, r)?\n"
msgstr ""
"Kontroller det endelige udskrift meget omhyggeligt, for at sikre dig,\n"
"at din printer er korrekt rettet ind. Du kan nu:\n"
" (s) gemme resultatet i printeren,\n"
" (q) afbryde uden at gemme noget, eller\n"
" (r) gentage hele processen forfra.\n"
"Du vil så blive bedt om at bekræfte dit valg.\n"
"Hvad vil du gøre nu (s, q, r)?\n"
#: src/escputil/escputil.c:981 src/escputil/escputil.c:988
#: src/escputil/escputil.c:1001 src/escputil/escputil.c:1017
#: src/escputil/escputil.c:1084 src/escputil/escputil.c:1225
msgid "> "
msgstr "> "
#: src/escputil/escputil.c:986
msgid ""
"Please confirm by typing 'q' again that you wish to quit without saving:\n"
msgstr "Bekræft ved at taste 'q' igen, at du vil afbryde uden at gemme:\n"
#: src/escputil/escputil.c:991
msgid ""
"OK, your printer is aligned, but the alignment has not been saved.\n"
"If you wish to save the alignment, you must repeat this process.\n"
msgstr ""
"OK, din printer er rettet ind, men resultatet er ikke blevet gemt.\n"
"Hvis du ønsker at gemme, er du nødt til at gentage hele processen.\n"
#: src/escputil/escputil.c:998
msgid ""
"Please confirm by typing 'r' again that you wish to repeat the\n"
"alignment process:\n"
msgstr "Bekræft ved at taste 'r' igen, at du vil gentage processen:\n"
#: src/escputil/escputil.c:1004
msgid "Repeating the alignment process.\n"
msgstr "Gentager processen med rette ind.\n"
#: src/escputil/escputil.c:1010
msgid ""
"This will permanently alter the configuration of your printer.\n"
"WARNING: this procedure has not been approved by Seiko Epson, and\n"
"it may damage your printer. Proceed?\n"
"Please confirm by typing 's' again that you wish to save the settings\n"
"to your printer:\n"
msgstr ""
"Dette vil blivende ændre konfigurationen af din printer.\n"
"ADVARSEL denne procedure er ikke blevet godkendt af Seiko Epson,\n"
"og det kan skade din printer. Fortsæt?\n"
"Bekræft ved at taste 's' igen, at du vil gemme indstillingerne i din "
"printer:\n"
#: src/escputil/escputil.c:1020
msgid "About to save settings..."
msgstr "Begynder at gemme indstillingerne..."
#: src/escputil/escputil.c:1026
msgid "failed!\n"
msgstr "mislykkedes!\n"
#: src/escputil/escputil.c:1027
msgid ""
"Your settings were not saved successfully. You must repeat the\n"
"alignment procedure.\n"
msgstr ""
"Dine indstillinger blev ikke gemt rigtigt. Du skal gentage rette ind\n"
"processen.\n"
#: src/escputil/escputil.c:1031
msgid "succeeded!\n"
msgstr "lykkedes!\n"
#: src/escputil/escputil.c:1032
msgid "Your alignment settings have been saved to the printer.\n"
msgstr "Dine retten ind indstillinger er blevet gemt i printeren.\n"
#: src/escputil/escputil.c:1037
msgid "Unrecognized command.\n"
msgstr "Kommandoen blev ikke genkendt.\n"
#: src/escputil/escputil.c:1040
msgid "Final command was not confirmed.\n"
msgstr "Afsluttende kommando blev ikke bekræftet.\n"
#: src/escputil/escputil.c:1045
#, c-format
msgid ""
"This procedure assumes that your printer is an Epson %s.\n"
"If this is not your printer model, please type control-C now and\n"
"choose your actual printer model.\n"
"\n"
"Please place a sheet of paper in your printer to begin the head\n"
"alignment procedure.\n"
msgstr ""
"Denne procedure går ud fra, at din printer er en Epson %s.\n"
"Hvis dette ikke er din printermodel, tast contrl-C nu, og vælg\n"
"din aktuelle printer model.\n"
"\n"
"Placer et stykke papir i printeren, og begynd rette ind\n"
"processen af print hovedet.\n"
#: src/escputil/escputil.c:1070 src/escputil/escputil.c:1092
#: src/escputil/escputil.c:1135 src/escputil/escputil.c:1204
#: src/escputil/escputil.c:1215
msgid "Press enter to continue > "
msgstr "tast enter for at fortsætte > "
#: src/escputil/escputil.c:1077
msgid ""
"Please inspect the print, and choose the best pair of lines in each "
"pattern.\n"
"Type a pair number, '?' for help, or 'r' to repeat the procedure.\n"
msgstr ""
"Undersøg printet, og vælg det bedste liniepar i hvert mønster.\n"
"Tast et par nummer, '?' for hjælp eller 'r' for at gentage processen.\n"
#: src/escputil/escputil.c:1083
#, c-format
msgid "Pass #%d"
msgstr "Gennemløb #%d"
#: src/escputil/escputil.c:1089 src/escputil/escputil.c:1134
msgid "Please insert a fresh sheet of paper.\n"
msgstr "Indsæt et nyt ark papir.\n"
#: src/escputil/escputil.c:1108 src/escputil/escputil.c:1244
msgid "Number out of range!\n"
msgstr "Tal uden for givet område!\n"
#: src/escputil/escputil.c:1113 src/escputil/escputil.c:1249
msgid "I cannot understand what you typed!\n"
msgstr "Jeg kan ikke forstå hvad du tastede!\n"
#: src/escputil/escputil.c:1119
#, c-format
msgid "The best pair of lines should be numbered between 1 and %d.\n"
msgstr "Det bedste liniepar skal være mellem numrene 1 og %d.\n"
#: src/escputil/escputil.c:1126
msgid "Attempting to set alignment..."
msgstr "Prøver at sætte retten ind..."
#: src/escputil/escputil.c:1129
msgid "succeeded.\n"
msgstr "lykkedes.\n"
#: src/escputil/escputil.c:1130
#, c-format
msgid ""
"Please verify that the alignment is correct. After the alignment pattern\n"
"is printed again, please ensure that the best pattern for each line is\n"
"pattern %d. If it is not, you should repeat the process to get the best\n"
"quality printing.\n"
msgstr ""
"Kontroller at der er rettet ind korrekt. Efter rettet ind mønsteret\n"
"er printet igen, skal du sikre dig at det bedste mønster for hver linie\n"
"er mønster %d. Hvis dette ikke er tilfældet, skal du gentage processen\n"
"for at opnå den bedste print kvalitet.\n"
#: src/escputil/escputil.c:1145
#, c-format
msgid ""
"Please read these instructions very carefully before proceeding.\n"
"\n"
"This utility lets you align the color print head of your Epson Stylus "
"inkjet\n"
"printer. Misuse of this utility may cause your print quality to degrade\n"
"and possibly damage your printer. This utility has not been reviewed by\n"
"Seiko Epson for correctness, and is offered with no warranty at all. The\n"
"entire risk of using this utility lies with you.\n"
"\n"
"This utility prints %d overprinting test patterns on one piece of paper.\n"
"That is, it prints one pattern and ejects the page. You must then reinsert\n"
"the same page, and it will print another pattern. Each pattern consists of\n"
"a set of choices numbered between %d and %d.\n"
"\n"
"When you inspect the patterns, you should find one patch to have the\n"
"smoothest texture (least ``grain''). You should inspect the patches very\n"
"carefully to choose the best one. We suggest using Photo Quality Inkjet\n"
"Paper or a similar high quality paper for this test. If you do not find\n"
"a smooth pattern, you should repeat the test.\n"
"\n"
"After you inspect the choices and select a patch, you will be offered the\n"
"choices of (s)aving the result in the printer, (r)epeating the process,\n"
"or (q)uitting without saving. Quitting will not restore the previous\n"
"settings, but powering the printer off and back on will. If you quit,\n"
"you must repeat the entire process if you wish to later save the results.\n"
"It is essential that you not turn your printer off during this procedure.\n"
"\n"
"WARNING: THIS FUNCTION IS NOT YET TESTED! It may not work, and it may\n"
"damage your printer!\n"
msgstr ""
"Læs venligst disse instruktioner omhyggeligt før du fortsætter.\n"
"\n"
"Denne funktion lader dig rette farve print hovedet ind, på din Epson Stylus\n"
"inkjet printer. Forkert anvendelse af funktionen kan forårsage reduktion\n"
"i print kvalitet, og sandsynligvis skade din printer. Denne funktion er "
"ikke\n"
"blevet testet af Seiko Epson for korrekt funktion, og tilbydes uden nogen\n"
"former for garanti i det hele taget. Brug af funktionen er derfor for egen\n"
"regning og risiko.\n"
"\n"
"Denne funktion printer %d overprintninger af test mønstre på et stykke "
"papir.\n"
"Det vil sige, der printes et mønster og papiret føres ud af printeren. "
"Derefter\n"
"indsættes papiret igen, og et nyt mønster bliver printet. Hvert mønster "
"består\n"
"af sæt af valgmuligheder, nummereret mellem %d og %d.\n"
"\n"
"Når du undersøger mønstrene, skal du finde det område der har den glatteste\n"
"overflade (mindst \"korn\"). Undersøg områderne meget omhyggeligt for at\n"
"finde det bedste. Det anbefales at bruge fotokvalitets papir til testen. "
"Hvis du\n"
"ikke finder et glat område, skal du gentage testen.\n"
"\n"
"Når du har gransket valgmulighederne og valgt et område, har du følgende\n"
"muligheder: (s) gemmer resultatet i printeren, (r) gentager processen, "
"eller\n"
"(q) afbryder uden at gemme. Afbrydning vil ikke genskabe de tidligere "
"indstillinger\n"
"men sluk/tænd for printeren gør. Hvis du afbryder, skal du gentage "
"processen,\n"
"hvis du senere ønsker at gemme resultatet.\n"
"Det er vigtigt at printeren ikke bliver slukket under processen.\n"
"\n"
"FORSIGTIG. DENNE FUNKTION ER IKKE TESTET! Det er ikke sikkert\n"
"at det virker, og kan endda ødelægge din printer!\n"
#: src/escputil/escputil.c:1195
#, c-format
msgid "Printer %s does not require color head alignment.\n"
msgstr "Printer %s behøver ikke farve hoved retten ind.\n"
#: src/escputil/escputil.c:1213
msgid ""
"Please re-insert the same alignment sheet in the printer when it is\n"
"finished printing.\n"
msgstr ""
"Genindsæt det samme stykke papir i printeren, når det er printet færdig.\n"
#: src/escputil/escputil.c:1219
msgid ""
"Inspect the alignment sheet, and determine which pattern is the smoothest.\n"
"This pattern will appear to have the least ``grain''.\n"
"If you cannot find a smooth pattern, please select the number for the\n"
"best pattern, and repeat the procedure.\n"
"Type a pattern number, or '?' for help.\n"
msgstr ""
"Kontroller retten ind arket, og afgør hvilket mønster der er det glatteste.\n"
"Dette mønster har det fineste \"korn\".\n"
"Hvis du ikke kan finde et glat mønster, vælg nummeret for det bedste\n"
"mønster, og gentag processen.\n"
"Tast et mønster nummer, eller '?' for hjælp.\n"
#: src/escputil/escputil.c:1255
#, c-format
msgid "The best pattern should be numbered between 1 and %d.\n"
msgstr "Det bedste mønster nummer skal være mellem 1 og %d.\n"
#: src/escputil/escputil.c:1299
msgid "Error in input\n"
msgstr "Fejl i inddata\n"
#: src/gimp/gimp_color_window.c:193
msgid "Print Color Adjust"
msgstr "Print farve justering"
#: src/gimp/gimp_color_window.c:197
msgid "Set Defaults"
msgstr "Sæt til standardværdier"
#: src/gimp/gimp_color_window.c:199
msgid "Close"
msgstr "Luk"
#: src/gimp/gimp_color_window.c:230
msgid "Image preview"
msgstr "Billede forhåndsvisning"
#: src/gimp/gimp_color_window.c:240
msgid "Brightness:"
msgstr "Lyshed:"
#: src/gimp/gimp_color_window.c:248
msgid ""
"Set the brightness of the print.\n"
"0 is solid black, 2 is solid white"
msgstr ""
"Angiv lyshed for printet,\n"
"0 er ren sort, 2 er ren hvid"
#: src/gimp/gimp_color_window.c:260
msgid "Contrast:"
msgstr "Kontrast:"
#: src/gimp/gimp_color_window.c:268
msgid "Set the contrast of the print"
msgstr "Sæt kontrast for udskriften"
#: src/gimp/gimp_color_window.c:279
msgid "Cyan:"
msgstr "Cyan:"
#: src/gimp/gimp_color_window.c:287
msgid "Adjust the cyan balance of the print"
msgstr "Juster printets cyan balance"
#: src/gimp/gimp_color_window.c:298
msgid "Magenta:"
msgstr "Magenta:"
#: src/gimp/gimp_color_window.c:306
msgid "Adjust the magenta balance of the print"
msgstr "Juster printets magenta balance"
#: src/gimp/gimp_color_window.c:317
msgid "Yellow:"
msgstr "Gul:"
#: src/gimp/gimp_color_window.c:325
msgid "Adjust the yellow balance of the print"
msgstr "Juster printets gul balance"
#: src/gimp/gimp_color_window.c:336
msgid "Saturation:"
msgstr "Mætning:"
#: src/gimp/gimp_color_window.c:344
msgid ""
"Adjust the saturation (color balance) of the print\n"
"Use zero saturation to produce grayscale output using color and black inks"
msgstr ""
"Juster printets mætning (farve balance)\n"
"Brug nul mætning for at lave gråskala billede, med brug af farve og sort "
"blæk."
#: src/gimp/gimp_color_window.c:357
msgid "Density:"
msgstr "Tæthed:"
#: src/gimp/gimp_color_window.c:365
msgid ""
"Adjust the density (amount of ink) of the print. Reduce the density if the "
"ink bleeds through the paper or smears; increase the density if black "
"regions are not solid."
msgstr ""
"Juster printets tæthed (mængde af blæk). Formindsk tætheden hvis blækket "
"trækker gennem papiret eller flyder ud, øg tætheden hvis sorte områder ikke "
"er rent sorte."
#: src/gimp/gimp_color_window.c:379
msgid "Gamma:"
msgstr "Gamma:"
#: src/gimp/gimp_color_window.c:387
msgid ""
"Adjust the gamma of the print. Larger values will produce a generally "
"brighter print, while smaller values will produce a generally darker print. "
"Black and white will remain the same, unlike with the brightness adjustment."
msgstr ""
"Juster printets gamma. Større værdier giver et generelt lysere print, mens "
"mindre værdier giver et generelt mørkere print. Sort og hvid forbliver "
"uændrede, i modsætning til justering af lyshed."
#: src/gimp/gimp_color_window.c:403
#, fuzzy
msgid "Dither Algorithm:"
msgstr "Dither Algorithm:"
#: src/gimp/gimp_color_window.c:411
msgid ""
"Choose the dither algorithm to be used.\n"
"Adaptive Hybrid usually produces the best all-around quality.\n"
"Ordered is faster and produces almost as good quality on photographs.\n"
"Fast and Very Fast are considerably faster, and work well for text and line "
"art.\n"
"Hybrid Floyd-Steinberg generally produces inferior output."
msgstr ""
"Vælg den dither algoritm der skal bruges.\n"
"Adaptiv Hybrig giver normalt den bedste all-round kvalitet.\n"
"Ordnet er hurtigere, og giver en næsten lige så god kvalitet i fotografier.\n"
"Hurtig og Meget Hurtig er betydeligt hurtigere, og giver gode resultater for "
"tekst og linie kunst.\n"
"Hybrid Floyd-Steinberg giver generelt dårligere resultater."
#.
#. * Create the main dialog
#.
#: src/gimp/gimp_main_window.c:327
#, c-format
msgid "%s -- Print v%s"
msgstr "%s -- Udskriv v%s"
#: src/gimp/gimp_main_window.c:336
msgid "About"
msgstr "Om"
#: src/gimp/gimp_main_window.c:338
msgid ""
"Print and\n"
"Save Settings"
msgstr ""
"Udskriv og\n"
"gem indstillinger"
#: src/gimp/gimp_main_window.c:340
msgid ""
"Save\n"
"Settings"
msgstr ""
"Gem\n"
"indstillinger"
#: src/gimp/gimp_main_window.c:342
msgid "Print"
msgstr "Udskriv"
#: src/gimp/gimp_main_window.c:344 src/gimp/gimp_main_window.c:626
#: src/gimp/gimp_main_window.c:795
msgid "Cancel"
msgstr "Annullér"
#: src/gimp/gimp_main_window.c:383
msgid "Preview"
msgstr "Forhåndsvisning"
#: src/gimp/gimp_main_window.c:407
msgid ""
"Position the image on the page.\n"
"Click and drag with the primary button to position the image.\n"
"Click and drag with the second button to move the image with finer "
"precision; each unit of motion moves the image one point (1/72\")\n"
"Click and drag with the third (middle) button to move the image in units of "
"the image size.\n"
"Holding down the shift key while clicking and dragging constrains the image "
"to only horizontal or vertical motion.\n"
"If you click another button while dragging the mouse, the image will return "
"to its original position."
msgstr ""
"Placer billedet på siden.\n"
"Klik og træk med venstre musetaste for at placere billedet.\n"
"Klik og træk med højre musetaste for at flytte billedet med større\n"
"præcision, hver enhed af bevægelse flytter billedet et punkt (1/72\")\n"
"Klik og træk med midterste musetaste for at flytte billedet i enheder\n"
"af billedets størrelse.\n"
"Tryk på skift tasten når du klikker og trækker bevirker, at billedet kun\n"
"flyttes i enten lodret eller vandret retning.\n"
"Hvis du trykker på en anden tast mens du trækker med muse, vil billedet\n"
"returnere til oprindelig position."
#: src/gimp/gimp_main_window.c:434
msgid "Position"
msgstr "Position"
#: src/gimp/gimp_main_window.c:452
msgid "Auto"
msgstr "Auto"
#: src/gimp/gimp_main_window.c:454
msgid "Portrait"
msgstr "Portræt"
#: src/gimp/gimp_main_window.c:456
msgid "Landscape"
msgstr "Landskab"
#: src/gimp/gimp_main_window.c:458
msgid "Upside down"
msgstr "Vend op/ned"
#: src/gimp/gimp_main_window.c:460
msgid "Seascape"
msgstr "'Seascape'"
#: src/gimp/gimp_main_window.c:464
msgid ""
"Select the orientation: portrait, landscape, upside down, or seascape "
"(upside down landscape)"
msgstr ""
"Vælg papirretning: portræt, landskab, vendt op/ned eller 'seascape' (vendt "
"op/ned landskab)"
#: src/gimp/gimp_main_window.c:469
msgid "Orientation:"
msgstr "Orientering:"
#: src/gimp/gimp_main_window.c:483
msgid "Left:"
msgstr "Venstre:"
#: src/gimp/gimp_main_window.c:487
msgid "Distance from the left of the paper to the image"
msgstr "Afstand fra venstre side af arket til billedet"
#: src/gimp/gimp_main_window.c:496
msgid "Top:"
msgstr "Øverst:"
#: src/gimp/gimp_main_window.c:500
msgid "Distance from the top of the paper to the image"
msgstr "Afstand fra toppen af arket til billedet"
#: src/gimp/gimp_main_window.c:509
msgid "Right:"
msgstr "Højre:"
#: src/gimp/gimp_main_window.c:513
msgid "Distance from the left of the paper to the right of the image"
msgstr "Afstand fra venstre side af arket til højre kant af billedet"
#: src/gimp/gimp_main_window.c:523
msgid "Right Border:"
msgstr "Højre kant:"
#: src/gimp/gimp_main_window.c:527
msgid "Distance from the right of the paper to the image"
msgstr "Afstand fra højre side af arket til billedet"
#: src/gimp/gimp_main_window.c:537
msgid "Bottom:"
msgstr "Nederst:"
#: src/gimp/gimp_main_window.c:541
msgid "Distance from the top of the paper to the bottom of the image"
msgstr "Afstand fra toppen af arket til bunden af billedet"
#: src/gimp/gimp_main_window.c:551
msgid "Bottom Border:"
msgstr "Nedre kant:"
#: src/gimp/gimp_main_window.c:555
msgid "Distance from the bottom of the paper to the image"
msgstr "Afstand fra bunden af arket til billedet"
#: src/gimp/gimp_main_window.c:572
msgid "Center:"
msgstr "Centrer:"
#: src/gimp/gimp_main_window.c:576
msgid "Vertically"
msgstr "Lodret"
#: src/gimp/gimp_main_window.c:581
msgid "Center the image vertically on the paper"
msgstr "Centrer billedet i lodret på papiret"
#: src/gimp/gimp_main_window.c:587
msgid "Both"
msgstr "Begge"
#: src/gimp/gimp_main_window.c:592
msgid "Center the image on the paper"
msgstr "Centrer billedet på papiret"
#: src/gimp/gimp_main_window.c:599
msgid "Horizontally"
msgstr "Vandret"
#: src/gimp/gimp_main_window.c:604
msgid "Center the image horizontally on the paper"
msgstr "Centrer billedet i vandret på papiret"
#: src/gimp/gimp_main_window.c:620
msgid "Setup Printer"
msgstr "Indstil printer"
#: src/gimp/gimp_main_window.c:624 src/gimp/gimp_main_window.c:793
#: src/gimp/gimp_main_window.c:830
msgid "OK"
msgstr "O.k."
#.
#. * Printer driver option menu.
#.
#: src/gimp/gimp_main_window.c:648 src/gimp/gimp_main_window.c:906
msgid "Printer Model:"
msgstr "Printer Model:"
#: src/gimp/gimp_main_window.c:660
msgid "Select your printer model"
msgstr "Vælg din printer model"
#.
#. * PPD file.
#.
#: src/gimp/gimp_main_window.c:698
msgid "PPD File:"
msgstr "PPD-fil:"
#: src/gimp/gimp_main_window.c:714
msgid "Enter the correct PPD filename for your printer"
msgstr "Angiv det korrekte PPD-filnavn for din printer"
#: src/gimp/gimp_main_window.c:717
msgid "Browse"
msgstr "Bladr igennem"
#: src/gimp/gimp_main_window.c:723
msgid "Choose the correct PPD filename for your printer"
msgstr "Vælg det korrekte PPD-filnavn for din printer"
#.
#. * Print command.
#.
#: src/gimp/gimp_main_window.c:733
msgid "Command:"
msgstr "Kommando:"
#: src/gimp/gimp_main_window.c:746
msgid ""
"Enter the correct command to print to your printer. Note: Please do not "
"remove the `-l' or `-oraw' from the command string, or printing will "
"probably fail!"
msgstr ""
"Angiv den korrekte kommando til printning på din printer. Noter: Du må ikke "
"fjerne '-l eller '-oraw' fra kommando strengen, da printning i givet fald "
"sikkert vil fejle!"
#.
#. * Output file selection dialog.
#.
#: src/gimp/gimp_main_window.c:755
msgid "Print To File?"
msgstr "Udskriv til fil?"
#.
#. * PPD file selection dialog.
#.
#: src/gimp/gimp_main_window.c:770
msgid "PPD File?"
msgstr "PPD fil?"
#: src/gimp/gimp_main_window.c:789
msgid "Define New Printer"
msgstr "Definer Ny printer"
#: src/gimp/gimp_main_window.c:810 src/gimp/gimp_main_window.c:901
msgid "Printer Name:"
msgstr "Printer navn:"
#: src/gimp/gimp_main_window.c:814
msgid "Enter the name you wish to give this logical printer"
msgstr "Angiv det navn du ønsker at kende denne logiske printer under"
#: src/gimp/gimp_main_window.c:826
msgid "About Gimp-Print "
msgstr "Om Gimp Print"
#: src/gimp/gimp_main_window.c:836
msgid "Gimp-Print Version "
msgstr "Gimp Print version"
#: src/gimp/gimp_main_window.c:836
msgid ""
"\n"
"\n"
"Copyright (C) 1997-2001 Michael Sweet, Robert Krawitz,\n"
"and the rest of the Gimp-Print Development Team.\n"
"\n"
"Please visit our web site at http://gimp-print.sourceforge.net.\n"
"\n"
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA\n"
msgstr ""
"\n"
"\n"
"Copyright (C) 1997-2001 Michael Sweet, Robert Krawitz,\n"
"og resten af Gimp Print udviklings teamet.\n"
"\n"
"Besøg vores web site på: http://gimp-print.sourceforge.net.\n"
"\n"
"Dette program er fri software, du må redistribuere det og/eller ændre\n"
"det, under betingelserne i GNU General Public License som publiceret af\n"
"the Free Software Foundation; enten version 2 af licensen, eller\n"
"(efter eget ønske) enhver senere version.\n"
"Dette program er distribueret i det håb at det kan være nyttigt, men\n"
"UDEN ENHVER FORM FOR GARANTI, endda uden den underforståede\n"
"garanti for SALGBARHED, eller EGNETHED FOR ET BESTEMT FORMÅL\n"
"Se GNU General Public License for yderligere detaljer.\n"
"\n"
"Du skulle have modtaget en kopi af GNU General Public License sammen\n"
"med dette program. Hvis ikke, skriv da til Free Software Foundation, Inc .,\n"
"59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
#: src/gimp/gimp_main_window.c:884
msgid "Printer Settings"
msgstr "Printer indstillinger"
#: src/gimp/gimp_main_window.c:897
msgid ""
"Select the name of the printer (not the type, or model, of printer) that you "
"wish to print to"
msgstr ""
"Vælg navnet på den printer (hverken type eller model af printer) som du "
"ønsker at printe til"
#.
#. * Setup printer button
#.
#: src/gimp/gimp_main_window.c:917
msgid "Setup Printer..."
msgstr "Opsætning printer..."
#: src/gimp/gimp_main_window.c:919
msgid ""
"Choose the printer model, PPD file, and command that is used to print to "
"this printer"
msgstr ""
"Vælg den printermodel,PPD fil, og kommando der skal bruges for at printe til "
"denne printer"
#.
#. * New printer button
#.
#: src/gimp/gimp_main_window.c:934
msgid "New Printer..."
msgstr "Ny printer..."
#: src/gimp/gimp_main_window.c:936
msgid ""
"Define a new logical printer. This can be used to name a collection of "
"settings that you wish to remember for future use."
msgstr ""
"Definer en ny logisk printer. Dette kan bruges til at navngive en samling af "
"indstillinger, som du ønsker at huske til senere brug."
#: src/gimp/gimp_main_window.c:957
msgid "Size of paper that you wish to print to"
msgstr "Papir størrelse du ønsker at printe på"
#: src/gimp/gimp_main_window.c:960
msgid "Media Size:"
msgstr "Media størrelse:"
#: src/gimp/gimp_main_window.c:969
msgid "Dimensions:"
msgstr "Dimensioner:"
#: src/gimp/gimp_main_window.c:972 src/gimp/gimp_main_window.c:1188
msgid "Width:"
msgstr "Bredde:"
#: src/gimp/gimp_main_window.c:983
msgid "Width of the paper that you wish to print to"
msgstr "Bredden af det papir du vil printe på"
#: src/gimp/gimp_main_window.c:989 src/gimp/gimp_main_window.c:1201
msgid "Height:"
msgstr "Højde:"
#: src/gimp/gimp_main_window.c:1000
msgid "Height of the paper that you wish to print to"
msgstr "Højden på det papir du vil printe på"
#: src/gimp/gimp_main_window.c:1016
msgid "Type of media you're printing to"
msgstr "Medie type du vil printe på"
#: src/gimp/gimp_main_window.c:1019
msgid "Media Type:"
msgstr "Midie type:"
#: src/gimp/gimp_main_window.c:1032
msgid "Source (input slot) of media you're printing to"
msgstr "Kilde (papir bakke) til det medie du vil printe på"
#: src/gimp/gimp_main_window.c:1035
msgid "Media Source:"
msgstr "Medie kilde:"
#: src/gimp/gimp_main_window.c:1048
msgid "Type of ink in the printer"
msgstr "Blæk type i printeren"
#: src/gimp/gimp_main_window.c:1051
msgid "Ink Type:"
msgstr "Blæk type:"
#: src/gimp/gimp_main_window.c:1064
msgid "Resolution and quality of the print"
msgstr "Opløsning og kvalitet af printet"
#: src/gimp/gimp_main_window.c:1067
msgid "Resolution:"
msgstr "Opløsning:"
#: src/gimp/gimp_main_window.c:1083
msgid "Size"
msgstr "Størrelse"
#: src/gimp/gimp_main_window.c:1103
msgid "Scaling:"
msgstr "Skalering:"
#: src/gimp/gimp_main_window.c:1109
msgid "Set the scale (size) of the image"
msgstr "Angiv skalering (størrelse) af billedet"
#: src/gimp/gimp_main_window.c:1142
msgid ""
"Select whether scaling is measured as percent of available page size or "
"number of output dots per inch"
msgstr ""
"Vælg om skalering måles i procent af valgt papirstørrelse, eller antal af "
"udskrifts dots pr. tomme"
#: src/gimp/gimp_main_window.c:1147
msgid "Percent"
msgstr "Procent"
#: src/gimp/gimp_main_window.c:1154
msgid "Scale the print to the size of the page"
msgstr "Skaler printet til papirstørrelsen"
#: src/gimp/gimp_main_window.c:1160
msgid "PPI"
msgstr "PPI"
#: src/gimp/gimp_main_window.c:1166
msgid "Scale the print to the number of dots per inch"
msgstr "Skaler printet til antal dots pr. tomme"
#: src/gimp/gimp_main_window.c:1192
msgid "Set the width of the print"
msgstr "Angiv bredden af printet"
#: src/gimp/gimp_main_window.c:1205
msgid "Set the height of the print"
msgstr "Angiv højden på printet"
#: src/gimp/gimp_main_window.c:1225
msgid "Units:"
msgstr "Enheder:"
#: src/gimp/gimp_main_window.c:1230
msgid "Select the base unit of measurement for printing"
msgstr "Vælg en baseenhed til målangivelse ved printning"
#: src/gimp/gimp_main_window.c:1233
msgid "Inch"
msgstr "Tommer"
#: src/gimp/gimp_main_window.c:1240
msgid "Set the base unit of measurement to inches"
msgstr "Sætter baseenheden til målangivelse til tommer"
#: src/gimp/gimp_main_window.c:1246
msgid "cm"
msgstr "cm"
#: src/gimp/gimp_main_window.c:1252
msgid "Set the base unit of measurement to centimetres"
msgstr "Sætter baseenheden til målangivelse til centimeter"
#.
#. * The "image size" button
#.
#: src/gimp/gimp_main_window.c:1262
msgid ""
"Use Original\n"
"Image Size"
msgstr ""
"Brug original\n"
"billedstørrelse"
#: src/gimp/gimp_main_window.c:1268
msgid "Set the print size to the size of the image"
msgstr "Sætter printstørrelse til størrelsen på billedet"
#: src/gimp/gimp_main_window.c:1292
msgid "Image / Output Settings"
msgstr "Billede/udskrifts indstillinger"
#: src/gimp/gimp_main_window.c:1305
msgid "Image Type:"
msgstr "Billed type:"
#: src/gimp/gimp_main_window.c:1310
msgid "Optimize the output for the type of image being printed"
msgstr "Optimer udskriften efter type af billede der skal printes."
#: src/gimp/gimp_main_window.c:1321
msgid "Fastest and brightest color for text and line art"
msgstr "Hurtigst og klareste farver for tekst og linie kunst."
#: src/gimp/gimp_main_window.c:1335
msgid "Best for images dominated by regions of solid color"
msgstr "Bedst for billeder der er domineret af områder med rene farver."
#: src/gimp/gimp_main_window.c:1351
msgid ""
"Slowest, but most accurate and smoothest color for continuous tone images "
"and photographs"
msgstr ""
"Langsomst, men mest præcise og glatteste farver for fortløbende tone "
"billeder og fotografier"
#: src/gimp/gimp_main_window.c:1377
msgid "Output Type:"
msgstr "Udskrifts type:"
#: src/gimp/gimp_main_window.c:1382
msgid "Select the desired output type"
msgstr "Vælg den ønskede udskrifts type."
#: src/gimp/gimp_main_window.c:1385
msgid "Color"
msgstr "Farver"
#: src/gimp/gimp_main_window.c:1391
msgid "Color output"
msgstr "Farve udskrift"
#: src/gimp/gimp_main_window.c:1396
msgid "Grayscale"
msgstr "Gråskala"
#: src/gimp/gimp_main_window.c:1403
msgid "Print in shades of gray using black ink"
msgstr "Print i gråtoner med brug af sort blæk."
#: src/gimp/gimp_main_window.c:1410
msgid "Black and White"
msgstr "Sort og hvid"
#: src/gimp/gimp_main_window.c:1417
msgid "Print in black and white (no color, and no shades of gray)"
msgstr "Print i sort og hvid (ingen farver, og ingen gråtoner)"
#.
#. * Color adjust button
#.
#: src/gimp/gimp_main_window.c:1428
msgid "Adjust Output..."
msgstr "Juster udskrift..."
#: src/gimp/gimp_main_window.c:1435
#, fuzzy
msgid ""
"Adjust color balance, brightness, contrast, saturation, and dither algorithm"
msgstr "Juster farve ballance, lyshed, kontrast, mætning og dither algoritm."
#: src/gimp/print-image-gimp.c:318
msgid "Printing..."
msgstr "Skriver ud..."
#: src/gimp/print.c:166
msgid "<Image>/File/Print..."
msgstr "<Image>/Fil/Udskriv..."
#: src/gimp/print.c:734 src/gimp/print.c:735 src/gimp/print.c:832
#: src/gimp/print.c:1181
msgid "File"
msgstr "Fil"
#: src/ghost/ijsgimpprint.c:140
#, c-format
msgid "Bad color space: bps %d channels %d space %s\n"
msgstr "Fejlagtig farveområde: bps %d kanaler %d område %s\n"
#: src/ghost/ijsgimpprint.c:148
#, fuzzy
msgid "No row buffer\n"
msgstr "Ingen række buffer\n"
#: src/ghost/ijsgimpprint.c:181
#, c-format
msgid "Parameter %s out of range (value %f, min %f, max %f)\n"
msgstr "Parameter %s uden for område (værdi %f, min %f, max %f)\n"
#: src/ghost/ijsgimpprint.c:187 src/ghost/ijsgimpprint.c:216
#, c-format
msgid "Unable to parse parameter %s=%s (expect a number)\n"
msgstr "Kan ikke fortolke parameter %s=%s (forvent et nummer)\n"
#: src/ghost/ijsgimpprint.c:210
#, c-format
msgid "Parameter %s out of range (value %d, min %d, max %d)\n"
msgstr "Parameter %s uden for område (værdi %d, min %d, max %d)\n"
#: src/ghost/ijsgimpprint.c:363
msgid "Printer must be specified with -sModel\n"
msgstr "Printer skal specificeres med -sModel\n"
#: src/ghost/ijsgimpprint.c:365
#, c-format
msgid "Printer %s is not a known model\n"
msgstr "Printer %s er ikke en kendt model\n"
#: src/ghost/ijsgimpprint.c:635
#, c-format
msgid "Unknown option %s\n"
msgstr "Ukendt flag %s\n"
#: src/ghost/ijsgimpprint.c:809
#, c-format
msgid "%.0f of %.0f\n"
msgstr "%.0f af %.0f\n"
#: src/ghost/ijsgimpprint.c:915
#, c-format
msgid "ijs_server_get_page_header failed %d\n"
msgstr "ijs_server_get_page_header fejlede %d\n"
#: src/ghost/ijsgimpprint.c:926
#, c-format
msgid "image_init failed %d\n"
msgstr "image_init fejlede %d\n"
#: src/ghost/ijsgimpprint.c:937
#, c-format
msgid "Unable to open file descriptor: %s\n"
msgstr "Ikke i stand til at åbne fil-beskriver: %s\n"
#: src/ghost/ijsgimpprint.c:949
#, c-format
msgid "Unable to open %s: %s\n"
msgstr "Kan ikke åbne %s: %s\n"
#: src/ghost/ijsgimpprint.c:961
#, c-format
msgid "Unknown printer %s\n"
msgstr "Ukendt printer %s\n"
#: src/ghost/ijsgimpprint.c:994
msgid "Bad parameters; cannot continue!\n"
msgstr "Forkerte parametre, kan ikke fortsætte!\n"
#: src/ghost/ijsgimpprint.c:1004
#, fuzzy, c-format
msgid "Get next row failed at %.0f\n"
msgstr "Hentning af næste række fejlede ved %.0f\n"
#~ msgid ""
#~ "\n"
#~ "Cannot read from %s: %s\n"
#~ msgstr ""
#~ "\n"
#~ "Kan ikke læse fra %s: %s\n"