gimp-print - en to en_GB translation catalogue (47 entries)

en: Color conversion module
en_GB: Colour conversion module

en: 150x150 DPI
en_GB: 150×150 DPI

en: 300x300 DPI
en_GB: 300×300 DPI

en: 600x300 DPI
en_GB: 600×300 DPI

en: 600x600 DPI
en_GB: 600×600 DPI

en: 1200x600 DPI
en_GB: 1200×600 DPI

en: CMY Color
en_GB: CMY Colour

en: CMYK Color
en_GB: CMYK Colour

en: Photo CcMmY Color
en_GB: Photo CcMmY Colour

en: Photo CcMmYK Color
en_GB: Photo CcMmYK Colour

en: Color
en_GB: Colour

en: Bright Colors
en_GB: Bright Colours

en: Color Correction
en_GB: Colour Correction

en: Color correction to be applied
en_GB: Colour correction to be applied

en: Adjust the saturation (color balance) of the print
    Use zero saturation to produce grayscale output using color and black inks
en_GB: Adjust the saturation (colour balance) of the print
    Use zero saturation to produce grayscale output using colour and black inks

en: Traditional Gimp-Print color conversion
en_GB: Traditional Gimp-Print colour conversion

en: Nearest Neighbor Avoidance
en_GB: Nearest Neighbour Avoidance

en: 300 DPI x 600 DPI
en_GB: 300 DPI × 600 DPI

en: 2400 DPI x 1200 DPI
en_GB: 2400 DPI × 1200 DPI

en: 2400 DPI x 1200 DPI high quality
en_GB: 2400 DPI × 1200 DPI high quality

en: 2400 DPI x 1200 DPI highest quality
en_GB: 2400 DPI × 1200 DPI highest quality

en: Four Color Standard
en_GB: Four Colour Standard

en: Three Color Composite
en_GB: Three Colour Composite

en: Six Color Photo
en_GB: Six Colour Photo

en: Five Color Photo Composite
en_GB: Five Colour Photo Composite

en: Premium Luster Photo Paper
en_GB: Premium Lustre Photo Paper

en: 600x600 DPI monochrome
en_GB: 600×600 DPI monochrome

en: 2400x600 DPI
en_GB: 2400×600 DPI

en: Color + Black Cartridges
en_GB: Colour + Black Cartridges

en: Color + Photo Cartridges
en_GB: Colour + Photo Cartridges

en: Apple Color StyleWriter 4100
en_GB: Apple Colour StyleWriter 4100

en: Apple Color StyleWriter 4500
en_GB: Apple Colour StyleWriter 4500

en: Apple Color StyleWriter 6500
en_GB: Apple Colour StyleWriter 6500

en: Color output
en_GB: Colour output

en: Center:
en_GB: Centre:

en: Center the image horizontally on the paper
en_GB: Centre the image horizontally on the paper

en: Center the image on the paper
en_GB: Centre the image on the paper

en: Center the image vertically on the paper
en_GB: Centre the image vertically on the paper

en: Print Color Adjust
en_GB: Print Colour Adjust

en: Adjust color balance, brightness, contrast, saturation, and dither algorithm
en_GB: Adjust colour balance, brightness, contrast, saturation, and dither algorithm

en: English
en_GB: English-GB

en: Usage: escputil [-c | -n | -a | -i | -s | -d | -l | -M]
                    [-P printer | -r device] [-u] [-q] [-m model] [ -S ]
    Perform maintenance on EPSON Stylus (R) printers.
    Examples: escputil --clean-head --printer stpex-on-third-floor
              escputil --ink-level --new --raw-device /dev/lp0
    
      Commands:
        -c|--clean-head    Clean the print head.
        -n|--nozzle-check  Print a nozzle test pattern.
                           Dirty or clogged nozzles will show as gaps in the
                           pattern.  If you see any gaps, you should clean
                           the print head.
        -a|--align-head    Align the print head.  CAUTION: Misuse of this
                           utility may result in poor print quality and/or
                           damage to the printer.
        -s|--status        Retrieve printer status.
        -i|--ink-level     Obtain the ink level from the printer.  This requires
                           read/write access to the raw printer device.
        -d|--identify      Query the printer for make and model information.
                           This requires read/write access to the raw printer
                           device.
        -l|--license       Display the license/warranty terms of this program.
        -M|--list-models   List the available printer models.
        -h|--help          Print this help message.
      Options:
        -P|--printer-name  Specify the name of the printer queue to operate on.
                           Default is the default system printer.
        -r|--raw-device    Specify the name of the device to write to directly
                           rather than going through a printer queue.
        -u|--new           The printer is a new printer (Stylus Color 740 or
                           newer).
        -q|--quiet         Suppress the banner.
        -S|--short-name    Print the short name of the printer with --identify.
        -m|--model         Specify the precise printer model for head alignment.
en_GB: Usage: escputil [-c | -n | -a | -i | -s | -d | -l | -M]
                    [-P printer | -r device] [-u] [-q] [-m model] [ -S ]
    Perform maintenance on EPSON Stylus (R) printers.
    Examples: escputil --clean-head --printer stpex-on-third-floor
              escputil --ink-level --new --raw-device /dev/lp0
    
      Commands:
        -c|--clean-head    Clean the print head.
        -n|--nozzle-check  Print a nozzle test pattern.
                           Dirty or clogged nozzles will show as gaps in the
                           pattern.  If you see any gaps, you should clean
                           the print head.
        -a|--align-head    Align the print head.  CAUTION: Misuse of this
                           utility may result in poor print quality and/or
                           damage to the printer.
        -s|--status        Retrieve printer status.
        -i|--ink-level     Obtain the ink level from the printer.  This requires
                           read/write access to the raw printer device.
        -d|--identify      Query the printer for make and model information.
                           This requires read/write access to the raw printer
                           device.
        -l|--license       Display the licence/warranty terms of this program.
        -M|--list-models   List the available printer models.
        -h|--help          Print this help message.
      Options:
        -P|--printer-name  Specify the name of the printer queue to operate on.
                           Default is the default system printer.
        -r|--raw-device    Specify the name of the device to write to directly
                           rather than going through a printer queue.
        -u|--new           The printer is a new printer (Stylus Color 740 or
                           newer).
        -q|--quiet         Suppress the banner.
        -S|--short-name    Print the short name of the printer with --identify.
        -m|--model         Specify the precise printer model for head alignment.

en: Usage: escputil [OPTIONS] [COMMAND]
    Usage: escputil [-c | -n | -a | -i | -s | -d | -l | -M]
                    [-P printer | -r device] [-u] [-q] [-m model] [ -S ]
    Perform maintenance on EPSON Stylus (R) printers.
    Examples: escputil -c -P stpex-on-third-floor
              escputil -i -u -r /dev/lp0
    
      Commands:
        -c Clean the print head.
        -n Print a nozzle test pattern.
              Dirty or clogged nozzles will show as gaps in the
              pattern.  If you see any gaps, you should clean
              the print head.
        -a Align the print head.  CAUTION: Misuse of this
              utility may result in poor print quality and/or
              damage to the printer.
        -s Retrieve printer status.
        -i Obtain the ink level from the printer.  This requires
              read/write access to the raw printer device.
        -d Query the printer for make and model information.  This
              requires read/write access to the raw printer device.
        -l Display the license/warranty terms of this program.
        -M List the available printer models.
        -h Print this help message.
      Options:
        -P Specify the name of the printer queue to operate on.
              Default is the default system printer.
        -r Specify the name of the device to write to directly
              rather than going through a printer queue.
        -u The printer is a new printer (Stylus Color 740 or newer).
        -q Suppress the banner.
        -S Print the short name of the printer with -d.
        -m Specify the precise printer model for head alignment.
en_GB: Usage: escputil [OPTIONS] [COMMAND]
    Usage: escputil [-c | -n | -a | -i | -s | -d | -l | -M]
                    [-P printer | -r device] [-u] [-q] [-m model] [ -S ]
    Perform maintenance on EPSON Stylus (R) printers.
    Examples: escputil -c -P stpex-on-third-floor
              escputil -i -u -r /dev/lp0
    
      Commands:
        -c Clean the print head.
        -n Print a nozzle test pattern.
              Dirty or clogged nozzles will show as gaps in the
              pattern.  If you see any gaps, you should clean
              the print head.
        -a Align the print head.  CAUTION: Misuse of this
              utility may result in poor print quality and/or
              damage to the printer.
        -s Retrieve printer status.
        -i Obtain the ink level from the printer.  This requires
              read/write access to the raw printer device.
        -d Query the printer for make and model information.  This
              requires read/write access to the raw printer device.
        -l Display the licence/warranty terms of this program.
        -M List the available printer models.
        -h Print this help message.
      Options:
        -P Specify the name of the printer queue to operate on.
              Default is the default system printer.
        -r Specify the name of the device to write to directly
              rather than going through a printer queue.
        -u The printer is a new printer (Stylus Color 740 or newer).
        -q Suppress the banner.
        -S Print the short name of the printer with -d.
        -m Specify the precise printer model for head alignment.

en: Gloss Optimizer
en_GB: Gloss Optimiser

en: Ink color
en_GB: Ink colour

en: Unrecognized command.
en_GB: Unrecognised command.

en: Bad color space: bps %d channels %d space %s
en_GB: Bad colour space: bps %d channels %d space %s
