# Copyright 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # Please email any bugs, comments, and/or additions to this file to: # bug-gdb@prep.ai.mit.edu # This file was written by Jason Molenda (jmolenda@apple.com) if $tracelevel then { strace $tracelevel } # Test library slides. On MacOS X, most system libraries have set # addresses where they will load. Our libc-like library, libSystem, loads # at 0x90000000 or somesuch, for instance. If another shared library tries # to go at that same address, it gets shifted to another addr, and gdb needs # to (1) notice that shift, (2) update all the symbols and breakpoints. set timeout 30 set prms_id 0 set bug_id 0 set testfile "slipnslide" set binfile ${objdir}/${subdir}/${testfile} if { [gdb_compile "${srcdir}/${subdir}/slipnslide.c" "${binfile}" executable {debug}] != "" } { gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." } # Start with a fresh gdb gdb_exit gdb_start gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} # Figure out where libSystem normally loads, its full pathname, and its short # name. send_gdb "info sharedlibrary\n" gdb_expect { -re ".* (libSystem...dylib) *(-|$hex) *- *init Y Y (.*libSystem.B.dylib) at ($hex)( \\(offset (0x0)\\))?\[\r\n\].*$gdb_prompt" { pass "get libSystem pre-startup load address" set libsystem_shortname $expect_out(1,string) set libsystem_full_pathname $expect_out(3,string) set libsystem_load_addr $expect_out(4,string) } -re "$gdb_prompt $" { fail "get libSystem pre-startup load address" } timeout { fail "(timeout) get libSystem pre-startup load address" } } # See where fputs() normally loads. set fputs_address {} send_gdb "p fputs\n" gdb_expect { -re ".*\\\$1 = .* ($hex) <fputs>.*$gdb_prompt $" { pass "get fputs pre-start load address" set fputs_address $expect_out(1,string) } -re "$gdb_prompt $" { fail "get fputs pre-start load address" } timeout { fail "(timeout) get fputs pre-start load address" } } # See where puts() normally loads. send_gdb "p puts\n" gdb_expect { -re ".*\\\$2 = .* ($hex) <puts>.*$gdb_prompt $" { pass "get puts pre-start load address" set libsystem_puts_address $expect_out(1,string) } -re "$gdb_prompt $" { fail "get puts pre-start load address" } timeout { fail "(timeout) get puts pre-start load address" } } if ![runto_main] then { fail "slipnslide tests suppressed" return -1 } # Verify that nothing has slid with the default case. send_gdb "info sharedlibrary\n" gdb_expect { -re ".* $decimal $libsystem_shortname *- $libsystem_load_addr *dyld Y Y $libsystem_full_pathname at $libsystem_load_addr \\(offset 0x0\\).*$gdb_prompt $" { pass "default libSystem didn't slide" } -re "$gdb_prompt $" { fail "default libSystem didn't slide" } timeout { fail "(timeout) default libSystem didn't slide" } } # Verify that fputs is where it should be. gdb_test "p fputs" "\\\$3 = .* $fputs_address <fputs>" "fputs is where it should be on a non-slide" gdb_exit ## ## Now we verify all that via MI just for fun. ## load_lib mi-support.exp set MIFLAGS "-i=mi1" mi_gdb_start mi_gdb_test "5-gdb-set use-cached-symfiles off" "5\\^done.*" mi_delete_breakpoints mi_gdb_reinitialize_dir $srcdir/$subdir mi_gdb_load ${binfile} set libsystem_commpage_full_pathname "$libsystem_full_pathname\\\[LC_SEGMENT.__DATA.__commpage\\\]" send_gdb "10-file-sharedlibrary-info\n" gdb_expect { -re "10\\^done.*shlib-info=\\\[num=\"$decimal\",name=\"$libsystem_shortname\",kind=\"-\",dyld-addr=\"-\",reason=\"init\",requested-state=\"Y\",state=\"Y\",path=\"$libsystem_full_pathname\",description=\"$libsystem_full_pathname\",slide=\"\",loaded_addr=\"$libsystem_load_addr\",prefix=\"\",commpage-objpath=\"$libsystem_commpage_full_pathname\"\\\].*" { pass "verify pre-start libsystem via mi1" } -re "10\\^done.*shlib-info=\\\[num=\"$decimal\",name=\"$libsystem_shortname\",kind=\"-\",dyld-addr=\"-\",reason=\"init\",requested-state=\"Y\",state=\"Y\",path=\"$libsystem_full_pathname\",description=\"$libsystem_full_pathname\",slide=\"\",loaded_addr=\"$libsystem_load_addr\",prefix=\"\",commpage-objpath=\"$libsystem_commpage_full_pathname\",sympath=.*" { fail "verify pre-start libsystem via mi1 - info shlib shows sympath" } -re "$mi_gdb_prompt$" { fail "verify pre-start libsystem via mi1" } timeout { fail "(timeout) verify pre-start libsystem via mi1" } } mi_gdb_test "20-break-insert main" "20\\^done,bkpt=.*" mi_gdb_test "30-gdb-set stop-on-solib-events 1" "30\\^done" "gdb shows solib events" send_gdb "40-exec-run\n" gdb_expect { -re "(40\\^running\[\r\n\]|=shlibs-updated\[\r\n\]|$mi_gdb_prompt)+" { pass "first part of run startup.." } timeout { fail "(timeout) first part of run startup.. in mi1" } } gdb_expect { -re ".*\\\*stopped,reason=\"shlib-event\".*$mi_gdb_prompt$" { pass "catch shlib-event during startup" } -re ".*\\\*stopped,reason=\"breakpoint-hit\".*$mi_gdb_prompt$" { fail "catch shlib-event during startup (hit breakpoint, missed shlib-event)" } timeout { fail "(timeout) catch shlib-event during startup in mi1" } } mi_gdb_test "50-file-sharedlibrary-info" "50\\^done.*shlib-info=\\\[num=\"$decimal\",name=\"$libsystem_shortname\",kind=\"-\",dyld-addr=\"$libsystem_load_addr\",reason=\"dyld\",requested-state=\"Y\",state=\"Y\",path=\"$libsystem_full_pathname\",description=\"$libsystem_full_pathname\",loaded_addr=\"$libsystem_load_addr\",slide=\"0x0\",prefix=\"\",commpage-objpath=\"$libsystem_commpage_full_pathname.*\"\\\].*" "verify post-start libsystem via mi1" mi_gdb_exit ## ## Now create a shared library that conflicts with libSystem. ## set testlibfile "libmylib" set libbinfile ${objdir}/${subdir}/${testlibfile}.dylib set additional_flags "additional_flags=-dynamiclib -seg1addr $libsystem_load_addr" if { [gdb_compile "${srcdir}/${subdir}/${testlibfile}.c" "${libbinfile}" executable [list debug $additional_flags]] != "" } { gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." } ## ## Mix it all up and see what happens.. ## gdb_start gdb_reinitialize_dir $srcdir/$subdir if [istarget "powerpc64-apple-darwin*"] { # work around 4126196 - start-with-shell breaks DYLD_INSERT_LIBRARIES on ppc64 gdb_test "set start-with-shell 0" } gdb_test "set env DYLD_INSERT_LIBRARIES $libbinfile" "" gdb_load ${binfile} # Verify that libSystem and mylib are both going to try loading at the same addr. send_gdb "info sharedlibrary\n" gdb_expect { -re ".* $decimal ${testlibfile}.dylib *- *- *init Y Y ${libbinfile} at $libsystem_load_addr.* $decimal $libsystem_shortname *- *- *init Y Y $libsystem_full_pathname at $libsystem_load_addr.*$gdb_prompt $" { pass "libmylib and libsystem will both try to load at same addr" } -re "$gdb_prompt $" { fail "libmylib and libsystem will both try to load at same addr" } timeout { fail "(timeout) libmylib and libsystem will both try to load at same addr" } } # Get address of function 'foo' in mylib, pre-slid # See where foo() normally loads. send_gdb "p foo\n" gdb_expect { -re ".*\\\$1 = .* ($hex) <foo>.*$gdb_prompt $" { pass "get foo pre-start load address" set foo_address $expect_out(1,string) } -re "$gdb_prompt $" { fail "get foo pre-start load address" set foo_address -1 } timeout { fail "(timeout) get foo pre-start load address" set foo_address -1 } } # See where puts() thinks it's going to load this time.. send_gdb "p puts\n" gdb_expect { -re ".*\\\$2 = .* ($hex) <puts>.*$gdb_prompt $" { pass "get puts pre-start load address" set puts_address $expect_out(1,string) } -re "$gdb_prompt $" { fail "get puts pre-start load address" set puts_address -1 } timeout { fail "(timeout) get puts pre-start load address" set puts_address -1 } } # Set three breakpoints: One on a function only in mylib.dylib, one # that exists in both mylib.dylib and libSystem, and one in only libSystem. send_gdb "b foo\n" gdb_expect { -re "Breakpoint 1 at ($hex): file .*$gdb_prompt $" { set foo_breakpoint_address $expect_out(1,string) } timeout { fail "could not set breakpoint on foo" } } send_gdb "b puts\n" gdb_expect { -re "Breakpoint 2 at ($hex): file .*$gdb_prompt $" { set puts_breakpoint_address $expect_out(1,string) } timeout { fail "could not set breakpoint on puts" } } send_gdb "b fputs\n" gdb_expect { -re "Breakpoint 3 at ($hex).*$gdb_prompt $" { set fputs_breakpoint_address $expect_out(1,string) } timeout { fail "could not set breakpoint on fputs" } } set foo_offset_pre_start [expr $foo_address - $libsystem_load_addr] set puts_offset_pre_start [expr $puts_address - $libsystem_load_addr] set foo_breakpoint_offset_pre_start [expr $foo_breakpoint_address - $libsystem_load_addr] set puts_breakpoint_offset_pre_start [expr $puts_breakpoint_address - $libsystem_load_addr] set fputs_breakpoint_offset_pre_start [expr $fputs_breakpoint_address - $libsystem_load_addr] # I don't explicitly test the breakpoint number here because on Tiger # and greater there is a posix & non-posix version of fputs, so there # might have been two breakpoints set above... gdb_test "b main" "Breakpoint \[0-9\] at .*" gdb_test "run" "Starting program:.*" # Verify that mydlib slid like it should have and libSystem stayed put. send_gdb "info sharedlibrary\n" gdb_expect { -re ".* $decimal $libsystem_shortname *- $libsystem_load_addr *dyld Y Y $libsystem_full_pathname at $libsystem_load_addr \\(offset 0x0\\).* $decimal ${testlibfile}.dylib *- ($hex) *dyld Y Y $libbinfile at ($hex) \\(offset (-?$hex)\\).*$gdb_prompt $" { set mylib_slid_addr $expect_out(1,string) set mylib_slid_addr_duplicate $expect_out(1,string) set mylib_slid_offset $expect_out(2,string) pass "mylib slid, libsystem stayed put" if {$mylib_slid_addr != $libsystem_load_addr} { pass "mylib is at address other than libsystem" } else { fail "mylib is at address other than libsystem" } if {$mylib_slid_addr == $mylib_slid_addr_duplicate} { pass "load addresses from info sharedlibrary match" } else { fail "load addresses from info sharedlibrary match" } } -re "$gdb_prompt $" { fail "mylib slid, libsystem stayed put" set mylib_slid_addr -1 set mylib_slid_addr_duplicate -1 set mylib_slid_offset -1 } timeout { fail "(timeout) mylib slid, libsystem stayed put" set mylib_slid_addr -1 set mylib_slid_addr_duplicate -1 set mylib_slid_offset -1 } } # See where foo actually loaded. send_gdb "p foo\n" gdb_expect { -re ".*\\\$$decimal = .* ($hex) <foo>.*$gdb_prompt $" { pass "get foo post-start load address" set foo_loaded_address $expect_out(1,string) } -re "$gdb_prompt $" { fail "get foo pre-start load address" } timeout { fail "(timeout) get foo pre-start load address" } } if {$foo_address != $foo_loaded_address} { pass "address of foo must change when library slid" } else { fail "address of foo must change when library slid" } # See where puts actually loaded. send_gdb "p puts\n" gdb_expect { -re ".*\\\$$decimal = .* ($hex) <puts>.*$gdb_prompt $" { pass "get puts post-start load address" set puts_loaded_address $expect_out(1,string) } -re "$gdb_prompt $" { fail "get puts pre-start load address" } timeout { fail "(timeout) get puts pre-start load address" } } if {$puts_address != $puts_loaded_address} { pass "address of puts must change when library slid" } else { fail "address of puts must change when library slid" } if {$puts_address != $libsystem_puts_address || $puts_loaded_address != $libsystem_puts_address} { pass "evaluation of puts is mylib version, not libsystem" } else { fail "evaluation of puts is mylib version, not libsystem" } # See where fputs actually loaded. send_gdb "p fputs\n" gdb_expect { -re ".*\\\$$decimal = .* ($hex) <fputs>.*$gdb_prompt $" { pass "get fputs post-start load address" set fputs_loaded_address $expect_out(1,string) } -re "$gdb_prompt $" { fail "get fputs pre-start load address" } timeout { fail "(timeout) get fputs pre-start load address" } } if {$fputs_address == $fputs_loaded_address} { pass "address of fputs didn't changed when user library slid" } else { fail "address of fputs didn't changed when user library slid" } set foo_offset_slid [expr $foo_loaded_address - $mylib_slid_addr] set puts_offset_slid [expr $puts_loaded_address - $mylib_slid_addr] set fputs_offset_slid [expr $fputs_loaded_address - $libsystem_load_addr] if {$foo_offset_pre_start == $foo_offset_slid} { pass "offset of foo in mylib.dylib stayed same after slide." } else { fail "offset of foo in mylib.dylib stayed same after slide." } if {$puts_offset_pre_start == $puts_offset_slid} { pass "offset of puts in mylib.dylib stayed same after slide." } else { fail "offset of puts in mylib.dylib stayed same after slide." } # See that 'foo' breakpoint moved. send_gdb "info br 1\n" gdb_expect { -re ".*$decimal *breakpoint *keep y *($hex) in foo.*$gdb_prompt $" { set foo_slid_address $expect_out(1,string) } -re "$gdb_prompt $" { set foo_slid_address -1 fail "could not examine foo breakpoint" } timeout { set foo_slid_address -1 fail "(timeout) could not examine foo breakpoint" } } if {$foo_slid_address != $foo_breakpoint_address } { pass "pass breakpoint on foo slid with library" } else { fail "pass breakpoint on foo slid with library" } # See that 'puts' breakpoint moved. send_gdb "info br 2\n" gdb_expect { -re ".*$decimal *breakpoint *keep y *($hex) .*libmylib.c:.*$gdb_prompt $" { set puts_slid_address $expect_out(1,string) } -re "$gdb_prompt $" { set puts_slid_address -1 fail "could not examine puts breakpoint" } timeout { set puts_slid_address -1 fail "(timeout) could not examine puts breakpoint" } } if {$puts_slid_address != $puts_breakpoint_address } { pass "pass breakpoint on puts slid with library" } else { fail "pass breakpoint on puts slid with library" } # See that 'fputs' breakpoint didn't moved. send_gdb "info br 3\n" gdb_expect { -re ".*$decimal *breakpoint *keep y *($hex) <fputs.*$gdb_prompt $" { set fputs_slid_address $expect_out(1,string) } -re "$gdb_prompt $" { set fputs_slid_address -1 fail "could not examine fputs breakpoint" } timeout { set fputs_slid_address -1 fail "(timeout) could not examine fputs breakpoint" } } if {$fputs_slid_address == $fputs_breakpoint_address} { pass "pass breakpoint on fputs in Libsystem didn't slide" } else { fail "pass breakpoint on fputs in Libsystem didn't slide" } gdb_test "dis 3" "" gdb_test "continue" "Breakpoint 1, foo.*libmylib.c:.*" "continue to slid breakpoint on foo" gdb_exit return 0