/* Common target dependent code for GDB on ARM systems. Copyright 2002, 2003 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Register numbers of various important registers. Note that some of these values are "real" register numbers, and correspond to the general registers of the machine, and some are "phony" register numbers which are too large to be actual register numbers as far as the user is concerned but do serve to get the desired values when passed to read_register. */ #ifndef __GDB_ARM_TDEP_H__ #define __GDB_ARM_TDEP_H__ /* APPLE LOCAL: Use R7 as FP for ARM. */ #ifdef TM_NEXTSTEP #define __ARM_FP_REG 7 #else #define __ARM_FP_REG 11 #endif enum gdb_regnum { ARM_R0_REGNUM = 0, ARM_A1_REGNUM = 0, /* first integer-like argument */ ARM_A4_REGNUM = 3, /* last integer-like argument */ ARM_AP_REGNUM = 11, ARM_IP_REGNUM = 12, ARM_SP_REGNUM = 13, /* Contains address of top of stack */ ARM_LR_REGNUM = 14, /* address to return to from a function call */ ARM_PC_REGNUM = 15, /* Contains program counter */ /* The original floating point unit registers aka FPA regs: */ ARM_F0_REGNUM = 16, /* first floating point register */ ARM_F3_REGNUM = 19, /* last floating point argument register */ ARM_F7_REGNUM = 23, /* last floating point register */ ARM_FPS_REGNUM = 24, /* floating point status register */ ARM_PS_REGNUM = 25, /* Contains processor status */ /* APPLE LOCAL: Use R7 as FP for ARM. */ ARM_FP_REGNUM = __ARM_FP_REG, /* Frame register in ARM code, if used. */ THUMB_FP_REGNUM = 7, /* Frame register in Thumb code, if used. */ ARM_NUM_ARG_REGS = 4, ARM_LAST_ARG_REGNUM = ARM_A4_REGNUM, ARM_NUM_FP_ARG_REGS = 4, ARM_LAST_FP_ARG_REGNUM = ARM_F3_REGNUM, /* APPLE LOCAL START: Support for VFP. */ /* The "VFP_REGNUM" registers are the VFPv1 register set of 32 32-bit registers that hold either integers or single precision floating point numbers (S0-S31). */ ARM_FIRST_VFP_REGNUM = 26, ARM_LAST_VFP_REGNUM = 57, ARM_FPSCR_REGNUM = 58, /* The VFP_PSEUDO registers are the "D variants" of the VFPv1 register set; 16 64-bit double-precision floating point registers usually referred to as D0-D15. They overlap with the S0-S31 registers so for instance S0 and S1 may occupy the same space as D0. */ ARM_FIRST_VFP_PSEUDO_REGNUM = 59, ARM_LAST_VFP_PSEUDO_REGNUM = 74, ARM_NUM_VFP_ARG_REGS = 4, ARM_NUM_VFP_PSEUDO_REGS = 16 /* APPLE LOCAL END: Support for VFP. */ }; /* Size of integer registers. */ #define INT_REGISTER_SIZE 4 /* Say how long FP registers are. Used for documentation purposes and code readability in this header. IEEE extended doubles are 80 bits. DWORD aligned they use 96 bits. */ #define FP_REGISTER_SIZE 12 /* APPLE LOCAL BEGIN: VFP support. */ #define VFP_REGISTER_RAW_SIZE 4 #define VFP_REGISTER_VIRTUAL_SIZE 4 /* APPLE LOCAL END: VFP support. */ /* Status registers are the same size as general purpose registers. Used for documentation purposes and code readability in this header. */ #define STATUS_REGISTER_SIZE 4 /* Number of machine registers. The only define actually required is NUM_REGS. The other definitions are used for documentation purposes and code readability. */ /* For 26 bit ARM code, a fake copy of the PC is placed in register 25 (PS) (and called PS for processor status) so the status bits can be cleared from the PC (register 15). For 32 bit ARM code, a copy of CPSR is placed in PS. */ #define NUM_FREGS 8 /* Number of floating point registers. */ #define NUM_SREGS 2 /* Number of status registers. */ #define NUM_GREGS 16 /* Number of general purpose registers. */ /* APPLE LOCAL BEGIN: VFP support. */ #define NUM_VFPREGS 32 /* Number of VFP registers. */ /* Instruction condition field values. */ #define INST_EQ 0x0 #define INST_NE 0x1 #define INST_CS 0x2 #define INST_CC 0x3 #define INST_MI 0x4 #define INST_PL 0x5 #define INST_VS 0x6 #define INST_VC 0x7 #define INST_HI 0x8 #define INST_LS 0x9 #define INST_GE 0xa #define INST_LT 0xb #define INST_GT 0xc #define INST_LE 0xd #define INST_AL 0xe #define INST_NV 0xf /* Defines for the ARM Address Mode 1 Data Processing opcodes. These are definitions for bits 24:21 of the opcode. */ #define ARM_DATA_PROC_OP_AND 0 /* Bitwise AND */ #define ARM_DATA_PROC_OP_EOR 1 /* Bitwise Exclusive OR */ #define ARM_DATA_PROC_OP_SUB 2 /* Subtract */ #define ARM_DATA_PROC_OP_RSB 3 /* Reverse Subtract */ #define ARM_DATA_PROC_OP_ADD 4 /* Add */ #define ARM_DATA_PROC_OP_ADC 5 /* Add with Carry */ #define ARM_DATA_PROC_OP_SBC 6 /* Subtract with Carry */ #define ARM_DATA_PROC_OP_RSC 7 /* Reverse Subtract with Carry */ #define ARM_DATA_PROC_OP_TST 8 /* Test */ #define ARM_DATA_PROC_OP_TEQ 9 /* Test Equivalence */ #define ARM_DATA_PROC_OP_CMP 10 /* Compare */ #define ARM_DATA_PROC_OP_CMN 11 /* Compare negative */ #define ARM_DATA_PROC_OP_ORR 12 /* Bitwise OR */ #define ARM_DATA_PROC_OP_MOV 13 /* Move */ #define ARM_DATA_PROC_OP_BIC 14 /* Bit Clear */ #define ARM_DATA_PROC_OP_MVN 15 /* Move Negative */ #define FLAG_N 0x80000000 #define FLAG_Z 0x40000000 #define FLAG_C 0x20000000 #define FLAG_V 0x10000000 /* Type of floating-point code in use by inferior. There are really 3 models that are traditionally supported (plus the endianness issue), but gcc can only generate 2 of those. The third is APCS_FLOAT, where arguments to functions are passed in floating-point registers. In addition to the traditional models, VFP adds two more. If you update this enum, don't forget to update fp_model_strings in arm-tdep.c. */ enum arm_float_model { ARM_FLOAT_AUTO, /* Automatic detection. Do not set in tdep. */ ARM_FLOAT_SOFT_FPA, /* Traditional soft-float (mixed-endian on LE ARM). */ ARM_FLOAT_FPA, /* FPA co-processor. GCC calling convention. */ ARM_FLOAT_SOFT_VFP, /* Soft-float with pure-endian doubles. */ ARM_FLOAT_VFP, /* Full VFP calling convention. */ ARM_FLOAT_NONE, /* APPLE LOCAL: No floating point registers (like libgcc). */ ARM_FLOAT_LAST /* Keep at end. */ }; /* ABI used by the inferior. */ enum arm_abi_kind { ARM_ABI_AUTO, ARM_ABI_APCS, ARM_ABI_AAPCS, ARM_ABI_LAST }; /* Target-dependent structure in gdbarch. */ struct gdbarch_tdep { /* The ABI for this architecture. It should never be set to ARM_ABI_AUTO. */ enum arm_abi_kind arm_abi; enum arm_float_model fp_model; /* Floating point calling conventions. */ CORE_ADDR lowest_pc; /* Lowest address at which instructions will appear. */ const gdb_byte *arm_breakpoint; /* Breakpoint pattern for an ARM insn. */ int arm_breakpoint_size; /* And its size. */ const gdb_byte *thumb_breakpoint; /* Breakpoint pattern for an ARM insn. */ int thumb_breakpoint_size; /* And its size. */ int jb_pc; /* Offset to PC value in jump buffer. If this is negative, longjmp support will be disabled. */ size_t jb_elt_size; /* And the size of each entry in the buf. */ int wordsize; /* APPLE LOCAL: Add this because the dyld code needs it. */ }; #ifndef LOWEST_PC #define LOWEST_PC (gdbarch_tdep (current_gdbarch)->lowest_pc) #endif /* Prototypes for internal interfaces needed by more than one MD file. */ int arm_pc_is_thumb_dummy (CORE_ADDR); int arm_pc_is_thumb (CORE_ADDR); CORE_ADDR thumb_get_next_pc (CORE_ADDR); CORE_ADDR arm_get_next_pc (CORE_ADDR); #endif