# Copyright 1999, 2000, 2002 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
# This file was based on a file written by Fred Fish. (fnf@cygnus.com)
# Test setup routines that work with the MI interpreter.
# The variable mi_gdb_prompt is a regexp which matches the gdb mi prompt.
# Set it if it is not already set.
global mi_gdb_prompt
if ![info exists mi_gdb_prompt] then {
set mi_gdb_prompt "\[(\]gdb\[)\] \[\r\n\]*"
}
set MIFLAGS "-i=mi"
#
# mi_gdb_exit -- exit the GDB, killing the target program if necessary
#
proc mi_gdb_exit {} {
catch mi_uncatched_gdb_exit
}
proc mi_uncatched_gdb_exit {} {
global GDB
global GDBFLAGS
global verbose
global gdb_spawn_id;
global gdb_prompt
global mi_gdb_prompt
global MIFLAGS
gdb_stop_suppressing_tests;
if { [info procs sid_exit] != "" } {
sid_exit
}
if ![info exists gdb_spawn_id] {
return;
}
verbose "Quitting $GDB $GDBFLAGS $MIFLAGS"
if { [is_remote host] && [board_info host exists fileid] } {
send_gdb "999-gdb-exit\n";
gdb_expect 10 {
-re "y or n" {
send_gdb "y\n";
exp_continue;
}
-re "Undefined command.*$gdb_prompt $" {
send_gdb "quit\n"
exp_continue;
}
-re "DOSEXIT code" { }
default { }
}
}
if ![is_remote host] {
remote_close host;
}
unset gdb_spawn_id
}
#
# start gdb -- start gdb running, default procedure
#
# When running over NFS, particularly if running many simultaneous
# tests on different hosts all using the same server, things can
# get really slow. Give gdb at least 3 minutes to start up.
#
proc mi_gdb_start { } {
global verbose
global GDB
global GDBFLAGS
global gdb_prompt
global mi_gdb_prompt
global timeout
global gdb_spawn_id;
global MIFLAGS
gdb_stop_suppressing_tests;
# Start SID.
if { [info procs sid_start] != "" } {
verbose "Spawning SID"
sid_start
}
verbose "Spawning $GDB -nw $GDBFLAGS $MIFLAGS"
if [info exists gdb_spawn_id] {
return 0;
}
if ![is_remote host] {
if { [which $GDB] == 0 } then {
perror "$GDB does not exist."
exit 1
}
}
set res [remote_spawn host "$GDB -nw $GDBFLAGS $MIFLAGS [host_info gdb_opts]"];
if { $res < 0 || $res == "" } {
perror "Spawning $GDB failed."
return 1;
}
gdb_expect {
-re "~\"GNU.*\r\n~\".*$mi_gdb_prompt$" {
# We have a new format mi startup prompt. If we are
# running mi1, then this is an error as we should be
# using the old-style prompt.
if { $MIFLAGS == "-i=mi1" } {
# perror "(mi startup) Got unexpected new mi prompt."
# remote_close host;
# return -1;
}
verbose "GDB initialized."
}
-re "\[^~\].*$mi_gdb_prompt$" {
# We have an old format mi startup prompt. If we are
# not running mi1, then this is an error as we should be
# using the new-style prompt.
if { $MIFLAGS != "-i=mi1" } {
# perror "(mi startup) Got unexpected old mi prompt."
# remote_close host;
# return -1;
}
verbose "GDB initialized."
}
-re ".*$gdb_prompt $" {
untested "Skip mi tests (got non-mi prompt)."
remote_close host;
return -1;
}
-re ".*unrecognized option.*for a complete list of options." {
untested "Skip mi tests (not compiled with mi support)."
remote_close host;
return -1;
}
-re ".*Interpreter `mi' unrecognized." {
untested "Skip mi tests (not compiled with mi support)."
remote_close host;
return -1;
}
timeout {
perror "(timeout) GDB never initialized after 10 seconds."
remote_close host;
return -1
}
}
set gdb_spawn_id -1;
# APPLE LOCAL: Turn off MI timings for the testsuite.
send_gdb "99-mi-enable-timings no\n"
gdb_expect 10 {
-re ".*99\\\^done\r\n$mi_gdb_prompt$" {
verbose "Disabling MI timings." 2
}
timeout {
warning "Couldn't disable MI timings."
}
}
# APPLE LOCAL
# FIXME: mi output does not go through pagers, so these can be removed.
# force the height to "unlimited", so no pagers get used
send_gdb "100-gdb-set height 0\n"
gdb_expect 10 {
-re ".*100-gdb-set height 0\r\n100\\\^done\r\n$mi_gdb_prompt$" {
verbose "Setting height to 0." 2
}
timeout {
warning "Couldn't set the height to 0"
}
}
# force the width to "unlimited", so no wraparound occurs
send_gdb "101-gdb-set width 0\n"
gdb_expect 10 {
-re ".*101-gdb-set width 0\r\n101\\\^done\r\n$mi_gdb_prompt$" {
verbose "Setting width to 0." 2
}
timeout {
warning "Couldn't set the width to 0."
}
}
return 0;
}
# Many of the tests depend on setting breakpoints at various places and
# running until that breakpoint is reached. At times, we want to start
# with a clean-slate with respect to breakpoints, so this utility proc
# lets us do this without duplicating this code everywhere.
#
proc mi_delete_breakpoints {} {
global mi_gdb_prompt
# FIXME: The mi operation won't accept a prompt back and will use the 'all' arg
send_gdb "102-break-delete\n"
gdb_expect 30 {
-re "Delete all breakpoints.*y or n.*$" {
send_gdb "y\n";
exp_continue
}
-re ".*102-break-delete\r\n102\\\^done\r\n$mi_gdb_prompt$" {
# This happens if there were no breakpoints
}
timeout { perror "Delete all breakpoints in mi_delete_breakpoints (timeout)" ; return }
}
# The correct output is not "No breakpoints or watchpoints." but an
# empty BreakpointTable. Also, a query is not acceptable with mi.
send_gdb "103-break-list\n"
gdb_expect 30 {
-re "103-break-list\r\n103\\\^done,BreakpointTable=\{\}\r\n$mi_gdb_prompt$" {}
-re "103-break-list\r\n103\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[\\\]\}" {}
-re "103-break-list\r\n103\\\^doneNo breakpoints or watchpoints.\r\n\r\n$mi_gdb_prompt$" {warning "Unexpected console text received"}
-re "$mi_gdb_prompt$" { perror "Breakpoints not deleted" ; return }
-re "Delete all breakpoints.*or n.*$" {
warning "Unexpected prompt for breakpoints deletion";
send_gdb "y\n";
exp_continue
}
timeout { perror "-break-list (timeout)" ; return }
}
}
proc mi_gdb_reinitialize_dir { subdir } {
global mi_gdb_prompt
global MIFLAGS
global suppress_flag
if { $suppress_flag } {
return
}
if [is_remote host] {
return "";
}
if { $MIFLAGS == "-i=mi1" } {
send_gdb "104-environment-directory\n"
gdb_expect 60 {
-re ".*Reinitialize source path to empty.*y or n. " {
warning "Got confirmation prompt for dir reinitialization."
send_gdb "y\n"
gdb_expect 60 {
-re "$mi_gdb_prompt$" {}
timeout {error "Dir reinitialization failed (timeout)"}
}
}
-re "$mi_gdb_prompt$" {}
timeout {error "Dir reinitialization failed (timeout)"}
}
} else {
send_gdb "104-environment-directory -r\n"
gdb_expect 60 {
-re "104\\\^done,source-path=.*\r\n$mi_gdb_prompt$" {}
-re "$mi_gdb_prompt$" {}
timeout {error "Dir reinitialization failed (timeout)"}
}
}
send_gdb "105-environment-directory $subdir\n"
gdb_expect 60 {
-re "Source directories searched.*$mi_gdb_prompt$" {
verbose "Dir set to $subdir"
}
-re "105\\\^done.*\r\n$mi_gdb_prompt$" {
# FIXME: We return just the prompt for now.
verbose "Dir set to $subdir"
# perror "Dir \"$subdir\" failed."
}
}
}
#
# load a file into the debugger.
# return a -1 if anything goes wrong.
#
proc mi_gdb_load { arg } {
global verbose
global loadpath
global loadfile
global GDB
global mi_gdb_prompt
upvar timeout timeout
# ``gdb_unload''
# ``gdb_file_cmd''
# FIXME: Several of these patterns are only acceptable for console
# output. Queries are an error for mi.
send_gdb "105-file-exec-and-symbols $arg\n"
gdb_expect 120 {
-re "Reading symbols from.*done.*$mi_gdb_prompt$" {
verbose "\t\tLoaded $arg into the $GDB"
# All OK
}
-re "has no symbol-table.*$mi_gdb_prompt$" {
perror "$arg wasn't compiled with \"-g\""
return -1
}
-re "A program is being debugged already.*Kill it.*y or n. $" {
send_gdb "y\n"
verbose "\t\tKilling previous program being debugged"
exp_continue
}
-re "Load new symbol table from \".*\".*y or n. $" {
send_gdb "y\n"
gdb_expect 120 {
-re "Reading symbols from.*done.*$mi_gdb_prompt$" {
verbose "\t\tLoaded $arg with new symbol table into $GDB"
# All OK
}
timeout {
perror "(timeout) Couldn't load $arg, other program already loaded."
return -1
}
}
}
-re "No such file or directory.*$mi_gdb_prompt$" {
perror "($arg) No such file or directory\n"
return -1
}
-re "105-file-exec-and-symbols .*\r\n105\\\^done\r\n$mi_gdb_prompt$" {
# We are just giving the prompt back for now
# All OK
}
timeout {
perror "couldn't load $arg into $GDB (timed out)."
return -1
}
eof {
# This is an attempt to detect a core dump, but seems not to
# work. Perhaps we need to match .* followed by eof, in which
# gdb_expect does not seem to have a way to do that.
perror "couldn't load $arg into $GDB (end of file)."
return -1
}
}
# ``load''
if { [info procs send_target_sid] != "" } {
# For SID, things get complex
send_target_sid
gdb_expect 60 {
-re "\\^done,.*$mi_gdb_prompt$" {
}
timeout {
perror "Unable to connect to SID target"
return -1
}
}
send_gdb "48-target-download\n"
gdb_expect 10 {
-re "48\\^done.*$mi_gdb_prompt$" {
}
timeout {
perror "Unable to download to SID target"
return -1
}
}
} elseif { [target_info protocol] == "sim" } {
# For the simulator, just connect to it directly.
send_gdb "47-target-select sim\n"
gdb_expect 10 {
-re "47\\^connected.*$mi_gdb_prompt$" {
}
timeout {
perror "Unable to select sim target"
return -1
}
}
send_gdb "48-target-download\n"
gdb_expect 10 {
-re "48\\^done.*$mi_gdb_prompt$" {
}
timeout {
perror "Unable to download to sim target"
return -1
}
}
}
return 0
}
# mi_gdb_test COMMAND PATTERN MESSAGE -- send a command to gdb; test the result.
#
# COMMAND is the command to execute, send to GDB with send_gdb. If
# this is the null string no command is sent.
# PATTERN is the pattern to match for a PASS, and must NOT include
# the \r\n sequence immediately before the gdb prompt.
# MESSAGE is an optional message to be printed. If this is
# omitted, then the pass/fail messages use the command string as the
# message. (If this is the empty string, then sometimes we don't
# call pass or fail at all; I don't understand this at all.)
#
# Returns:
# 1 if the test failed,
# 0 if the test passes,
# -1 if there was an internal error.
#
proc mi_gdb_test { args } {
global verbose
global mi_gdb_prompt
global GDB expect_out
upvar timeout timeout
if [llength $args]>2 then {
set message [lindex $args 2]
} else {
set message [lindex $args 0]
}
set command [lindex $args 0]
set pattern [lindex $args 1]
if [llength $args]==5 {
set question_string [lindex $args 3];
set response_string [lindex $args 4];
} else {
set question_string "^FOOBAR$"
}
if $verbose>2 then {
send_user "Sending \"$command\" to gdb\n"
send_user "Looking to match \"$pattern\"\n"
send_user "Message is \"$message\"\n"
}
set result -1
set string "${command}\n";
if { $command != "" } {
while { "$string" != "" } {
set foo [string first "\n" "$string"];
set len [string length "$string"];
if { $foo < [expr $len - 1] } {
set str [string range "$string" 0 $foo];
if { [send_gdb "$str"] != "" } {
global suppress_flag;
if { ! $suppress_flag } {
perror "Couldn't send $command to GDB.";
}
fail "$message";
return $result;
}
gdb_expect 2 {
-re "\[\r\n\]" { }
timeout { }
}
set string [string range "$string" [expr $foo + 1] end];
} else {
break;
}
}
if { "$string" != "" } {
if { [send_gdb "$string"] != "" } {
global suppress_flag;
if { ! $suppress_flag } {
perror "Couldn't send $command to GDB.";
}
fail "$message";
return $result;
}
}
}
if [info exists timeout] {
set tmt $timeout;
} else {
global timeout;
if [info exists timeout] {
set tmt $timeout;
} else {
set tmt 60;
}
}
gdb_expect $tmt {
-re "\\*\\*\\* DOSEXIT code.*" {
if { $message != "" } {
fail "$message";
}
gdb_suppress_entire_file "GDB died";
return -1;
}
-re "Ending remote debugging.*$mi_gdb_prompt\[ \]*$" {
if ![isnative] then {
warning "Can`t communicate to remote target."
}
gdb_exit
gdb_start
set result -1
}
-re "\[\r\n\]*($pattern)\[\r\n\]+$mi_gdb_prompt\[ \]*$" {
if ![string match "" $message] then {
pass "$message"
}
set result 0
}
-re "(${question_string})$" {
send_gdb "$response_string\n";
exp_continue;
}
-re "Undefined.* command:.*$mi_gdb_prompt\[ \]*$" {
perror "Undefined command \"$command\"."
fail "$message"
set result 1
}
-re "Ambiguous command.*$mi_gdb_prompt\[ \]*$" {
perror "\"$command\" is not a unique command name."
fail "$message"
set result 1
}
-re "Program exited with code \[0-9\]+.*$mi_gdb_prompt\[ \]*$" {
if ![string match "" $message] then {
set errmsg "$message: the program exited"
} else {
set errmsg "$command: the program exited"
}
fail "$errmsg"
return -1
}
-re "The program is not being run.*$mi_gdb_prompt\[ \]*$" {
if ![string match "" $message] then {
set errmsg "$message: the program is no longer running"
} else {
set errmsg "$command: the program is no longer running"
}
fail "$errmsg"
return -1
}
-re ".*$mi_gdb_prompt\[ \]*$" {
if ![string match "" $message] then {
fail "$message"
}
set result 1
}
"<return>" {
send_gdb "\n"
perror "Window too small."
fail "$message"
}
-re "\\(y or n\\) " {
send_gdb "n\n"
perror "Got interactive prompt."
fail "$message"
}
eof {
perror "Process no longer exists"
if { $message != "" } {
fail "$message"
}
return -1
}
full_buffer {
perror "internal buffer is full."
fail "$message"
}
timeout {
if ![string match "" $message] then {
fail "$message (timeout)"
}
set result 1
}
}
return $result
}
# mi_check_current_frame FUNC FILE LINE TESTNAME
# For MI variants where the FRAME attribute is not displayed at a
# "stopped" point, provide an easy way to verify we're where we think we are.
# Unnecessary calls should have a .* type regexp in them, e.g.
# mi_check_current_frame "foo" "until.c" "10" "run_to_main (2) loc-check"
proc mi_check_current_frame { func file line message } {
global hex
mi_gdb_test "-stack-list-frames 0 0" \
".*\\^done,stack=\(\\\[|\{\)frame=\{level=\"0 *\",addr=\"$hex\",fp=\"$hex\",func=\"$func\",file=\".*$file\",line=\"$line\",dir=\".*\"\}\(\\\]|\}\)" \
$message
}
# mi_get_bp_stopped BKPTNO THREAD ARGS FUNC FILE LINE MESSAGE
proc mi_get_bp_stopped { bkptno thread args func file line message } {
set reason "breakpoint-hit\",commands=\"no\",bkptno=\"$bkptno"
return [mi_get_stopped $reason $thread $args $func $file $line $message]
}
# mi_get_stopped REASON THREAD ARGS FUNC FILE LINE MESSAGE
proc mi_get_stopped { reason thread args func file line message } {
global hex
global mi_gdb_prompt
gdb_expect {
-re "\[\r\n\]*\\*stopped,reason=\"$reason\",thread-id=\"$thread\"\r\n$mi_gdb_prompt$" {
pass "$message"
mi_check_current_frame "$func" "$file" "$line" "$message loc-check"
return 0
}
-re ".*$mi_gdb_prompt$" {fail "$message"}
timeout {fail "$message (timeout)"}
}
return 1
}
#
# MI run command. (A modified version of gdb_run_cmd)
#
# In patterns, the newline sequence ``\r\n'' is matched explicitly as
# ``.*$'' could swallow up output that we attempt to match elsewhere.
proc mi_run_cmd {args} {
global suppress_flag
if { $suppress_flag } {
return -1
}
global mi_gdb_prompt
if [target_info exists gdb_init_command] {
send_gdb "[target_info gdb_init_command]\n";
gdb_expect 30 {
-re "$mi_gdb_prompt$" { }
default {
perror "gdb_init_command for target failed";
return;
}
}
}
if [target_info exists use_gdb_stub] {
if [target_info exists gdb,do_reload_on_run] {
# Specifying no file, defaults to the executable
# currently being debugged.
if { [mi_gdb_load ""] < 0 } {
return;
}
send_gdb "000-exec-continue\n";
gdb_expect 60 {
-re "Continu\[^\r\n\]*\[\r\n\]" {}
default {}
}
return;
}
if [target_info exists gdb,start_symbol] {
set start [target_info gdb,start_symbol];
} else {
set start "start";
}
# HACK: Should either use 000-jump or fix the target code
# to better handle RUN.
send_gdb "jump *$start\n"
warning "Using CLI jump command, expect run-to-main FAIL"
return
}
send_gdb "000-exec-run $args\n"
gdb_expect {
-re "000\\^running\r\n.*${mi_gdb_prompt}" {
}
timeout {
perror "Unable to start target"
return
}
}
# NOTE: Shortly after this there will be a ``000*stopping,...(gdb)''
}
#
# Just like run-to-main but works with the MI interface
#
proc mi_run_to_main { } {
global suppress_flag
if { $suppress_flag } {
return -1
}
global srcdir
global subdir
global binfile
global srcfile
mi_delete_breakpoints
mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}
mi_runto main
}
# Just like gdb's "runto" proc, it will run the target to a given
# function. The big difference here between mi_runto and mi_execute_to
# is that mi_execute_to must have the inferior running already. This
# proc will (like gdb's runto) (re)start the inferior, too.
#
# FUNC is the linespec of the place to stop (it inserts a breakpoint here).
# It returns:
# -1 if test suppressed, failed, timedout
# 0 if test passed
proc mi_runto {func} {
global suppress_flag
if { $suppress_flag } {
return -1
}
global mi_gdb_prompt expect_out
global hex decimal
set test "mi runto $func"
mi_gdb_test "200-break-insert $func" \
"200\\^done,bkpt=\{number=\"\[0-9\]+\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"$func\",file=\".*\",line=\"\[0-9\]*\",times=\"0\"\}" \
"breakpoint at $func"
if {![regexp {number="[0-9]+"} $expect_out(buffer) str]
|| ![scan $str {number="%d"} bkptno]} {
set bkptno {[0-9]+}
}
mi_run_cmd
# APPLE LOCAL: COMMANDS field included in 'stopped' reason
# FRAME field not included in 'stopped' reason
gdb_expect {
-re ".*000\\*stopped,reason=\"breakpoint-hit\",commands=\"no\",bkptno=\"$bkptno\",thread-id=\"$decimal\"\r\n$mi_gdb_prompt$" {
pass "$test"
return 0
}
-re ".*$mi_gdb_prompt$" {
fail "$test (2)"
}
timeout {
fail "$test (timeout)"
return -1
}
}
}
# Next to the next statement
# For return values, see mi_execute_to_helper
proc mi_next { test } {
return [mi_next_to {.*} {.*} {.*} {.*} $test]
}
# Step to the next statement
# For return values, see mi_execute_to_helper
proc mi_step { test } {
return [mi_step_to {.*} {.*} {.*} {.*} $test]
}
# cmd should not include the number or newline (i.e. "exec-step 3", not
# "220-exec-step 3\n"
# Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
# after the first prompt is printed.
proc mi_execute_to_helper { cmd reason func args file line extra test } {
global suppress_flag
if { $suppress_flag } {
return -1
}
global mi_gdb_prompt
global hex
global decimal
send_gdb "220-$cmd\n"
# APPLE LOCAL: Our 'stopped' result doesn't include the FRAME field, so issue
# a separate call to mi_check_current_frame. COMMANDS has already been
# inserted into the result by the caller of this function.
gdb_expect {
-re ".*220\\^running\r\n${mi_gdb_prompt}.*220\\*stopped,reason=\"$reason\",thread-id=\"$decimal\"$extra\r\n$mi_gdb_prompt$" {
pass "$test"
mi_check_current_frame "$func" "$file" "$line" "$test loc-check"
return 0
}
-re ".*220\\^running\r\n${mi_gdb_prompt}.*220\\*stopped,reason=\"$reason\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\".*\",args=\[\\\[\{\].*\[\\\]\}\],file=\".*\",line=\"\[0-9\]*\"\}.*\r\n$mi_gdb_prompt$" {
fail "$test (stopped at wrong place)"
return -1
}
-re "220\\^running\r\n${mi_gdb_prompt}.*\r\n${mi_gdb_prompt}$" {
fail "$test (unknown output after running)"
return -1
}
timeout {
fail "$test (timeout)"
return -1
}
}
}
proc mi_execute_to { cmd reason func args file line extra test } {
mi_execute_to_helper "$cmd" "$reason" "$func" "\\\[$args\\\]" \
"$file" "$line" "$extra" "$test"
}
proc mi_next_to { func args file line test } {
mi_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi_step_to { func args file line test } {
mi_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi_finish_to { func args file line result ret test } {
mi_execute_to "exec-finish" "function-finished" "$func" "$args" \
"$file" "$line" \
",gdb-result-var=\"$result\",return-value=\"$ret\"" \
"$test"
}
# APPLE LOCAL: When we stop due to a breakpoint, we'll get a COMMANDS field.
proc mi_continue_to { bkptno func args file line test } {
mi_execute_to "exec-continue" "breakpoint-hit\",commands=\"no\",bkptno=\"$bkptno" \
"$func" "$args" "$file" "$line" "" "$test"
}
proc mi0_execute_to { cmd reason func args file line extra test } {
mi_execute_to_helper "$cmd" "$reason" "$func" "\{$args\}" \
"$file" "$line" "$extra" "$test"
}
proc mi0_next_to { func args file line test } {
mi0_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi0_step_to { func args file line test } {
mi0_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
proc mi0_finish_to { func args file line result ret test } {
mi0_execute_to "exec-finish" "function-finished" "$func" "$args" \
"$file" "$line" \
",gdb-result-var=\"$result\",return-value=\"$ret\"" \
"$test"
}
# APPLE LOCAL: When we stop due to a breakpoint, we'll get a COMMANDS field.
proc mi0_continue_to { bkptno func args file line test } {
mi0_execute_to "exec-continue" "breakpoint-hit\",commands=\"no\",bkptno=\"$bkptno" \
"$func" "$args" "$file" "$line" "" "$test"
}