Wed Dec 31 11:43:53 1997 Mark Alexander * dsrec.c (load_srec): Check remotedebug flag when printing debug info. Wed Dec 31 10:33:15 1997 David Taylor * breakpoint.c (breakpoint_re_set): add _siglongjmp to list of longjmp breakpoints. Mon Dec 29 21:25:34 1997 Mark Alexander * dve3900-rom.c: New file to support Densan DVE-R3900/20 board. * monitor.c (monitor_debug): Move to utils.c, rename to puts_debug. (monitor_write_memory, monitor_read_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Remove useless address bits if current monitor has MO_ADDR_BITS_REMOVE flag. * monitor.h (MO_ADDR_BITS_REMOVE): Define. * utils.c (puts_debug): Formerly monitor_debug from monitor.c; move here and make public. Add better support for carriage returns. * defs.h (puts_debug): Declare. * dsrec.c (load_srec): Use puts_debug to print remotedebug information. Output header record correctly. (make_srec): Output a header record instead of a termination record if sect is non-NULL (value is ignored), but abfd is NULL. * config/mips/tm-tx39.h (DEFAULT_MIPS_TYPE): Remove definition. (REGISTER_NAMES): Define to add R3900-specific registers. * config/mips/tm-tx39l.h: Ditto. * config/mips/tx39.mt (TDEPFILES): Add dve3900-rom.o and support files. * config/mips/tx39l.mt: Ditto. Wed Dec 24 12:48:48 1997 Stan Shebs * dsrec.c: Cosmetic improvements. (make-srec): Change indexing of format and code tables to remove confusing empty entries. Mon Dec 22 21:51:53 1997 Mark Alexander * remote-mips.c (_initialize_remote_mips): Fix DDB doc string. Sun Dec 21 17:00:06 1997 David Taylor * d30v-tdep.c (d30v_frame_find_saved_regs): split most of function off into d30v_frame_find_saved_regs_offsets; (d30v_frame_find_saved_regs_offsets): new function. Got backtrace working when calling from framefull (unoptimized) routines (.e.g, main) into frameless (optimized) routines (e.g., printf). Fri Dec 19 09:49:49 1997 David Taylor * d30v-tdep.c (d30v_frame_chain): test end_of_stack (d30v_frame_find_saved_regs): set it. * config/d30v/tm-d30v.h: improved FRAME_CHAIN_VALID Thu Dec 18 12:34:28 1997 Andrew Cagney From Gavin Koch : mips-tdep.c * (mips_push_arguments): For big-endian shorts and char's store at * the correct location. Thu Dec 18 00:26:46 1997 Andrew Cagney * mdebugread.c (parse_partial_symbols): Delete check that symbols for file not already loaded. Did not work when an include file was involved. Wed Dec 17 10:43:04 1997 Andrew Cagney * elfread.c (elf_symfile_read): Since the partial symbol table is searched last in first, insert mdebug or XCOFF info into the partial symbol table before any DWARF2 info. Thu Dec 18 00:00:48 1997 Andrew Cagney * symfile.c (init_psymbol_list): Handle init with zero elements. * elfread.c (elf_symfile_read): If `mainline', clear psymbol table using init_psymbol_list 0. For build_psymtabs functions, pass mainline==0 so that psymbol_list isn't re-initialized. * symfile.c (discard_psymtab): New function, correctly unlink an empty psymtab from an object file. * dbxread.c (end_psymtab): Call discard_psymtab. * xcoffread.c (xcoff_end_psymtab): Ditto. * hpread.c (hpread_end_psymtab): Ditto. * os9kread.c (os9k_end_psymtab): Ditto. Wed Dec 17 10:47:05 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * tracepoint.c (set_raw_tracepoint): initialize addr_string to NULL; (trace_actions_command): call readline_begin_hook only if from_tty is true. Tue Dec 16 20:05:48 1997 Mark Alexander * configure.tgt: Change little-endian tx39 target name to tx39l. Tue Dec 16 11:24:30 1997 Jeffrey A Law (law@cygnus.com) * remote-sim.c (gdbsim_open): Use "--architecture" instead of ambigious short form. Tue Dec 16 10:29:16 1997 David Taylor * d30v-tdep.c (d30v_frame_chain): don't or in DMEM_START to FP_REGNUM value before return; (prologue_find_regs): two sets of offsets -- frame pointer and stack pointer, not just one that tries to do double duty; (d30v_frame_find_saved_regs): stop once we hit pc (in case we're stopped in the middle of the prologue) and improve handling of frameless prologues; (d30v_push_arguments): *ALL* arguments go on the stack until we run out of args registers, force sp to be 8 byte aligned. * config/tm-d30v.h (EXTRACT_STRUCT_VALUE_ADDRESS): fix, it's r2, not r0; (FRAME_CHAIN_VALID): handle use of external memory; (STACK_ALIGN): define. Mon Dec 15 15:13:57 1997 Andrew Cagney * remote-sim.c (gdbsim_wait): When HAVE_SIGACTION and SA_RESTART intall cntrl-c handler with SA_RESTART clear. On BSD systems this stops read syscalls's being restarted. * configure.in (configdirs): Check for sigaction. * configure: Re-generate. Mon Dec 15 11:38:52 1997 Andrew Cagney * dwarf2read.c: From change proposed by Gavin Koch. (address_significant_size): New static variable. (dwarf2_build_psymtabs_hard): Check consistency between `address_size' and `address_significant_size'. (read_address): MASK out all but the significant bits, as determined by `address_significant_size', of any addresses. (elf-bfd.h): Include. (dwarf2_build_psymtabs_hard): Set `address_significant_size' according to the arch_size of the elf object file. Thu Dec 11 13:40:46 1997 Andrew Cagney * dwarf2read.c (dwarf_decode_lines): Change type of address to CORE_ADDR. Thu Dec 11 22:39:02 1997 Mark Alexander From change made to branch by Bob Manson : * tic80-tdep.c (tic80_push_arguments): The compiler always passes structs by reference. Thu Dec 11 14:28:01 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * tracepoint.c (trace_find_command): don't error if going backwards thru the trace buffer in a loop. * (struct tracepoint): delete unused field. Wed Dec 10 17:57:00 1997 David Taylor * d30v-tdep.c : don't bury lots of magic numbers in the code instead use defines for the opcodes and opcode masks; update to use actual d30v patterns; fix register sizes to be 4 bytes not 2 bytes; improve prologue testing now that we have a C compiler; fix stack frame handling enough to get backtraces working; initial changes to push and pop frames (so that gdb can call functions in the inferior). * config/d30v/tm-d30v.h: update DMEM_START, IMEM_START, and STACK_START; change FR_REGNUM to 61 (was 11). Reformat comment about DUMMY FRAMES so that it is readable. Fix SAVED_PC_AFTER_FRAME macro. Wed Dec 10 17:41:07 1997 Jim Blandy * ch-valprint.c (chill_val_print): To avoid segfaults, don't print a string whose dynamic length is longer than its static length. Wed Dec 10 15:54:00 1997 Andrew Cagney * dwarf2read.c (dwarf2_build_psymtabs_hard): Check cu_header.length is within dwarf_info_buffer not dwarf_abbrev_buffer. Mon Dec 8 14:28:49 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * tracepoint.c (memrange_sortmerge): allow for memranges that overlap. (collect_pseudocommand etc.) cleanup decls. Fri Dec 5 09:22:35 1997 Nick Clifton * config/v850/tm-v850.h (BREAKPOINT): Reverted back to old value... Thu Dec 4 09:30:22 1997 Nick Clifton * config/v850/tm-v850.h (BREAKPOINT): Changed to match new value. Wed Dec 3 12:44:15 1997 Keith Seitz * tracepoint.c: Add declaration for x_command. * printcmd.c (x_command): Remove static declaration. Wed Dec 3 12:00:42 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * tracepoint.c (finish_tfind_command): call do_display so that auto-displays are updated by tfind. Also, keep track of frame and current-function so that tfind behaves like stepping (only show the stack frame if we step into a new function or return). Wed Dec 3 14:14:58 1997 David Taylor * sol-thread.c: additional support for debugging threaded core files on solaris; previously only kernel threads were found -- user threads generated errors. * corelow.c: don't register core_ops as a target if coreops_suppress_target is true (set by sol-thread.c). Tue Dec 2 14:53:09 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * tracepoint.c: make "tdump" command handle literal memranges. Tue Dec 2 11:34:48 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * tracepoint.c: use "lookup_cmd" to parse actions commands (thus allowing unambiguous prefixes and aliases). Tue Dec 2 10:15:57 1997 Nick Clifton * configure.tgt: Add support for Thumb target. Tue Dec 2 10:14:15 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * tracepoint.c: move prototype of validate_actionline(), and make it consistent with the function declaration. Thu Nov 27 09:07:18 1997 Michael Meissner * Makefile.in (tracepoint_h): New macro for tracepoint.h includes. (tracepoint.o): Add rule to build. Wed Nov 26 22:59:04 1997 Jeffrey A Law (law@cygnus.com) * remote-sim.c (gdbsim_cntrl_c): Lose ANSI prototype. * tracepoint.c (set_raw_tracepoint): fix typo Wed Nov 26 11:33:09 1997 Keith Seitz * tracepoint.c (set_raw_tracepoint): Make sure there's a trailing slash on the directory name. * top.c (get_prompt): New function. * top.h: Declare it. Wed Nov 26 09:59:47 1997 Andrew Cagney * dwarf2read.c (struct comp_unit_head): Change length and abbrev_offset fields to unsigned int. (dwarf2_build_psymtabs_hard): Verify length and offset read from .debug_info section. Mon Nov 24 19:36:34 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * tracepoint.c, tracepoint.h: new module, implements tracing, which is a new functionality somewhat like breakpoints except that a tracepoint stops the inferior only long enough to collect and cache selected buffers and memory locations, then allows the inferior to continue; the cached trace data can then be examined later. Mon Nov 24 14:17:02 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * infcmd.c: export registers_info, for use by other modules. * printcmd.c: export output_command, for use by other modules. * stack.c: export locals_info and args_info, for use by other modules. * remote.c: export getpkt, putpkt, and fromhex for external use. Make fromhex case-insensative. New function "remote_console_output" abstracts the acceptance of "O" packets from target. Make all "remotedebug" output go to stdout, not stderr. Mon Nov 24 08:59:28 1997 Andrew Cagney * valprint.c (print_longest): When CC has long long but printf doesn't, print decimal value as three parts. * config/i386/tm-fbsd.h: New file. * config/i386/fbsd.mt (TM_FILE): Change to tm-fbsd.h. * config/i386/nm-fbsd.h (FLOAT_INFO): Move definition from here. * config/i386/tm-fbsd.h (FLOAT_INFO): To here. * configure.in (PRINTF_HAS_LONG_LONG): Check full functionality of %ll format specifier. (SCANF_HAS_LONG_DOUBLE): Check the scanf family for support of long double using %Lg. * acconfig.h: Provide default undef for SCANF_HAS_LONG_DOUBLE. * configure: Re-generate. * c-exp.y (parse_number): Use sscanf %Lg when host has SCANF_HAS_LONG_DOUBLE not PRINTF_HAS_LONG_DOUBLE Sun Nov 23 17:12:58 1997 Andrew Cagney * printcmd.c (print_insn): Set the machine type if known. * i386-tdep.c (_initialize_i386_tdep): Delete "set assembly-language" command. Replaced by generic "set architecture". Set initial machine using bfd_lookup_arch. Fri Nov 21 19:43:23 1997 Jim Blandy * valops.c (call_function_by_hand): If the function has a prototype, convert its arguments as if by assignment. Otherwise, do the usual promotions. * stabsread.c (define_symbol): Set the TYPE_FLAG_PROTOTYPED flag on functions' types when we can; all C++ functions should get it, and if the Sun-style prototype notation is in the stabs, we can notice that. Fri Nov 21 12:20:16 1997 Ian Lance Taylor * aclocal.m4 (AM_CYGWIN32, AM_EXEEXT): Remove. They are already defined by the inclusion of ../bfd/aclocal.m4. * configure: Rebuild. Fri Nov 21 10:52:39 1997 Michael Meissner * Makefile.in (SHELL): Really do the change. Fri Nov 21 02:19:57 1997 Geoffrey Noer * Makefile.in: also revert SHELL change until configury changes work Thu Nov 20 16:35:13 1997 Doug Evans * sparc-tdep.c (sparc_pc_adjust): Don't assume sizeof (long) == 4. Thu Nov 20 04:11:27 1997 Geoffrey Noer * aclocal.m4: add EXEEXT setting rule * configure.in: call it * configure: regenerate * Makefile.in: pepper with EXEEXTs in appropriate places, set SHELL = @SHELL@ for those lame hosts that don't have a /bin/sh For some reason, EXEEXT isn't getting substututed in correctly so for now, set EXEEXT to empty string Mon Nov 17 15:35:06 1997 Doug Evans * Makefile.in (remote-sim.o): Depend on $(INCLUDE_DIR)/callback.h. Fri Nov 14 13:04:34 1997 Jeffrey A Law (law@cygnus.com) * jv-exp.y (copy_exp, insert_exp): Avoid ANSI prototypes. Thu Nov 13 09:47:35 1997 Michael Meissner * d30v-tdep.c (d30v_print_flags): Function to print the d30v flags in a human readable format. (print_flags_command): Command wrapper to call d30v_print_flags. (d30v_do_registers_info): When printing out all of the registers, print out the flag values in a human readable fashion. (_initialize_d30v_tdep): Add info flags command to print the flags. * config/d30v/tm-d30v.h (PSW_*): Add macros for each of the PSW bits that are defined. Wed Nov 12 14:58:39 1997 Jeff Holcomb * symfile.c (generic_load): Handle cancel from the ui_load_progress_hook routine. * dsrec.c (load_srec): Handle cancel from the ui_load_progress_hook routine. Mon Nov 10 15:13:13 1997 Ian Lance Taylor * valprint.c (print_longest): The b, h, w, and g format specifiers print unsigned values. Mon Nov 10 02:02:49 1997 Martin M. Hunt * top.c (quit_confirm): Change exit message. Tue Nov 4 16:52:50 1997 Geoffrey Noer * config/i386/cygwin32.mh: because cygwin.dll calls malloc/realloc to allocate memory for environ space, gdb cannot use memory checks -- set -DNO_MMCHECK Tue Nov 4 13:50:59 1997 Jim Blandy * jv-exp.y (ArrayAccess): Implement Name [ Expression ]; check the code to see why this is not trivial. (copy_exp, insert_exp): New functions. Fri Oct 24 17:24:00 1997 Dawn Perchik * dwarf2read.c (dwarf2_build_psymtabs_hard): Handle the case where a compilation unit die has no children (DW_TAG_compile_unit has DW_children_no). (scan_partial_symbols): Add comment for nesting_level. Wed Oct 29 15:53:24 1997 David Taylor * solib.c (solib_break_names): add entry for Solaris 2.6 run time linker. From Casper Dik via Peter Schauer. Tue Oct 28 17:31:47 1997 Martin M. Hunt * configure.in (configdir): Add -lcomdlg32 and -ladvapi32 to WIN32LIBS. * configure: Rebuild Fri Oct 24 16:48:21 1997 David Taylor * sol-thread.c (sol_find_new_threads_callback, sol_find_new_threads): New functions. * config/sparc/nm-sun4sol2.h (FIND_NEW_THREADS): New macro, invoke sol_find_new_threads. * thread.c (info_threads_command): invoke FIND_NEW_THREADS if it is defined. Thu Oct 23 16:16:04 1997 Jeff Law (law@fast.cs.utah.edu) * dbxread.c (process_one_symbol): Put back initialization of a variable lost during last change. Don't perform assignment inside conditionals. * stabsread.c (symbol_reference_defined): Return -1 for error/not found. All callers changed appropriately. (define_symbol): Don't perform assignment inside conditionals. Wed Oct 22 13:04:52 1997 Jeffrey A Law (law@cygnus.com) * mdebugread.c (psymtab_to_symtab_1): Handle new live range stabs entries. * dbxread.c: More comment cleanups. * stabsread.c: Fix various violations of the GNU coding and formatting standards. Update/add comments to make code clearer. (resolve_reference): Delete unused function. (ref_search_val): Remove function. It didn't belong in stabsread.c (resolve_live_range): No longer returns a value. Do not add it to the live range list until the entire range stab has been parsed. (get_substring): Remove duplicate declaration. (resolve_symbol_reference): Now static. Remove unnecessary code to deal with cleanups. (ref_add): Use xrealloc instea of realloc. (process_reference): Reorganize slightly to make clearer. * stabsread.h (resolve_symbol_reference): Remove declaration. (resolve_reference): Likewise. * symtab.c (find_active_alias): New function. (lookup_block_symbol): Use find_active_alias. * symtab.h (struct range_list): Fix dangling struct live_range reference. (ref_search_val): Remove decl. * symtab.h (struct range_list): Renamed from struct live_range. (struct symbol): Remove struct live_range_info substruct. Bring the alias list and range list fields up to the toplevel as "aliases" and "ranges". (SYMBOL_ALIASES, SYMBOL_RANGES): Corresponding changes. (SYMBOL_RANGE_START, SYMBOL_RANGE_END, SYMBOL_RANGE_NEXT): Delete. * stabsread.c: Corresponding changes. * dbxread.c: Fix various violations of the GNU coding and formatting standards. Update/add comments to make code clearer. (process_later): Use xrealloc instead of realloc. * symtab.c: Include inferior.h. Tue Oct 21 14:15:26 1997 Per Bothner * ch-exp.c: Rename FIELD_NAME to DOT_FIELD_NAME (to avoid conflict). Fri Oct 17 13:22:02 1997 Stan Shebs * infcmd.c: Improve grammar of "set args" help. Thu Oct 16 15:03:58 1997 Michael Meissner * remote-sds.c (sds_load): Properly declare as static. Wed Oct 15 10:27:14 1997 Doug Evans * config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Mask off displacement to 30 bits in call insn to handle --enable-64-bit-bfd. (STORE_STRUCT_RETURN): Change to handle --enable-64-bit-bfd. Tue Oct 14 22:13:27 1997 Dawn Perchik * stabsread.c: Make ref_map entries dynamically allocated. Thu Oct 9 12:37:57 1997 Frank Ch. Eigler * printcmd.c (print_address_symbolic, address_info): Mask target-specific flag bits from PC, for more aesthetic disassembly. * config/mips/tm-mips.h: Added PC masking for MIPS family (especially the MIPS16). Sat Oct 4 18:45:44 1997 Mark Alexander * remote-mips.c (mips-initialize): Work around flakiness in some versions of PMON after loading a program. Fri Oct 3 15:49:18 1997 Per Bothner * c-lang.h, cp-valprint.c (static_field_print): Make non-static. * parse.c, parser-defs.h (length_of_subexp): Make non-static. * jv-exp.y (FieldAccess): Handle dollar-VARIABLE as primary. (ArrayAccess): Likewise. Also remove warnings. (CastExpression): Implement (typename) UnaryExpression. (push_qualified_expression_name): Fix small bug. * jv-lang.c: Use TYPE_TAG_NAME, not TYPE_NAME for class names. (_initialize_jave_language): Fix typo (jave -> java). (java_language): Java does *not* have C-style arrays. (java_class_from_object): Make more general (and complicated). (java_link_class_type): Fix typo "super" -> "class". Handle arrays. (java_emit_char, java_printchar): New function. (evaluate_subexp_java case BINOP_SUBSCRIPT): Handle Java arrays. * jv-valprint.c (java_value_print): Implement printing of Java arrays. (java_print_value_fields): New function. (java_val_print): Better printing of TYPE_CODE_CHAR, TYPE_CODE_STRUCT. Fri Oct 3 09:52:26 1997 Mark Alexander * config/mips/tm-mips.h (MAKE_MSYMBOL_SPECIAL): Force MIPS16 addresses to be odd. (MIPS_FPU_SINGLE_REGSIZE, MIPS_FPU_DOUBLE_REGSIZE): Define. * mips-tdep.c (mips_extract_return_value): Doubles aren't returned in FP0 if FP registers are single-precision only. Mon Sep 29 23:03:03 1997 Mark Alexander * mips-tdep.c (set_reg_offset): New function. (mips16_heuristic_proc_desc): Calculate offsets of registers saved by entry pseudo-op after rest of prologue has been read. Use set_reg_offset to ignore all but the first save of a given register. (mips32_heuristic_proc_desc): Initialize frame adjustment value. * remote-sim.c (gdbsim_store_register): Don't update registers that have a null or empty name. * findvar.c (read_register_bytes): Don't fetch registers that have a null or empty name. Tue Sep 30 13:35:54 1997 Andrew Cagney * config/mips/tm-mips.h (NUM_REGS): Define conditionally. (REGISTER_NAMES): Ditto. Fri Sep 26 21:08:22 1997 Keith Seitz * dsrec.c (load_srec): add ui_load_progress_hook to display some feedback to user * symfile.c (generic_load): add ui_load_progress_hook to display some feedback to user Fri Sep 26 17:32:22 1997 Jason Molenda (crash@pern.cygnus.com) * command.c (add_cmd, add_show_from_set): Insert new commands in alphabetical order. Fri Sep 26 12:22:00 1997 Mark Alexander * config/mips-tm-mips.h (mips_extra_func_info): New frame_adjust member for storing offset of MIPS16 frame pointer from SP. * mips-tdep.c: Use RA_REGNUM instead of hardcoded 31 throughout. (PROC_FRAME_ADJUST): Define. (mips16_heuristic_proc_desc): Store frame pointer adjustment value. (get_frame_pointer): Use frame pointer adjustment value when calculating frame address. * remote-sim.c (gdbsim_fetch_register): Don't fetch registers that have a null or empty name. Fri Sep 26 12:40:51 1997 Jeffrey A Law (law@cygnus.com) * mips-tdep.c (_initialize_mips_tdep): Allow target files to override default FPU type. Fri Sep 26 10:33:54 1997 Felix Lee * configure.tgt (v850-*-*): necmsg.lib instead of v850.lib. Wed Sep 24 14:02:09 1997 Andrew Cagney * config/v850/tm-v850.h (BREAKPOINT): Use 1 word DIVH insn with RRRRR=0 for simulator breakpoint. Previous breakpoint insn was two words. Thu Sep 18 15:07:46 1997 Andrew Cagney * ser-e7kpc.c (get_ds_base): Only use under Windows. (windows.h): Include when any _WIN32 host. Wed Sep 24 18:12:47 1997 Stu Grossman * The following block of changes add support for debugging assembly source files. * breakpoint.c (resolve_sal_pc): Prevent crash when pc isn't associated with a function. * buildsym.c (record_line start_symtab end_symtab): Don't delete symtabs which only have line numbers (but no other debug symbols). * dbxread.c (read_dbx_symtab end_psymtab): Ditto. * remote-sim.c: New functions gdbsim_insert/remove_breakpoint. Use intrinsic simulator breakpoints if available, otherwise do it the hard way. * configure.tgt: Add d30v. * d30v-tdep.c: New file. * config/d30v/d30v.mt, config/d30v/tm-d30v.h: New files. Tue Sep 23 11:24:13 1997 Stan Shebs * Makefile.in (ALLCONFIG): Remove, inaccurate and never used. Tue Sep 23 00:08:18 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mips-tdep.c (mips_push_arguments): Tweak alignment of register value if the remaining length of a non-integral argument is smaller than the register size for big-endian non-EABI mode. * rs6000-tdep.c (branch_dest): Handle return from signal handler function via sigreturn kernel call. Mon Sep 22 15:32:06 1997 Dawn Perchik * stabsread.h, symtab.h, dbxread.c, symtab.c, stabsread.c: Fix prototypes. Remove function scoped function declarations. Fri Sep 19 18:51:26 1997 Felix Lee * config/i386/windows.mh (XDEPFILES): need to list some files explicitly, for odd reasons. Tue Sep 16 20:00:05 1997 Per Bothner * jv-exp.y (push_fieldnames): New, to handle EXP.FIELD1....FIELDN. (push_expression_name): New, to handle expression names. (push_qualified_expression_name): New, for qualified expression names. (parse_number): Fix bugs in parsing of non-decimal integers. * jv-lang.h, jv-lang.c (java_demangle_type_signature): New. * jv-lang.c (type_from_class): Just use name with java_lookup_class. (java_link_class_type): Add dummy "class" field. (java_lookup_type): New. (evaluate_subexp_java case STRUCTOP_STRUCT): Force to address. * jv-typeprint.c (java_type_print_base): Don't print "class" field. Use java_demangle_type_signature to print array class types. * jv-valprint.c (java_value_print): Preliminary array support. Print pointer as TYPE@HEXADDR, instead of (TYPE)0xHEXADDR. (java_val_print): Move check for object type to java_value_print. Check for null. Print pointer as @HEXADDR, not 0xHEXADDR. * valops.c (search_struct_field): Search basesclasses in ascending, not descending order. Hack to avoid virtual baseclass botch for Java interfaces. Tue Sep 16 19:56:23 1997 Per Bothner * util.c (run_cleanup_chain, make_run_cleanup, do_run_cleanups): New cleanup clean for cleanups to be run when at each 'run' command. * infcmd.c (run_command): Call do_run_cleanups. * solib.c (find_solib): Register cleanup to call clear_solib on a new 'run' command. (symbol_add_stub): First look for existing objfile with same name. Tue Sep 16 16:00:01 1997 Stan Shebs * remote-sds.c (sds_load): New function. (sds_ops): Use it. (sds_open): Don't set inferior_pid yet. (sds_kill): Remove contents. (sds_create_inferior): Rewrite to work more like monitor interfaces. (sds_restart): Remove, no longer used. * monitor.h (MO_SREC_ACK_PLUS, MO_SREC_ACK_ROTATE): New flags. * monitor.c (monitor_wait_srec_ack): Add DINK32-specific ack code. * dsrec.c (load_srec): Always write a header S-record. * dink32-rom.c (dink32_regnames): Fix the names of float registers. (dink32_cmds): Set to use S-record downloading with acks. * remote-est.c (est_cmds): Add MO_SREC_ACK_PLUS flag. Tue Sep 16 10:08:27 1997 Andrew Cagney * config/v850/tm-v850.h (BREAKPOINT): Set to a truely illegal instruction. * exec.c (exec_file_command): Call set_architecture_from_file. Mon Sep 15 13:01:22 1997 Mark Alexander * dbxread.c (MSYMBOL_SIZE): New macro. (end_psymtab): Use MSYMBOL_SIZE to extract size from minimal symbol. * elfread.c (elf_symtab_read): If ELF symbol is "special", such as a MIPS16 function, mark minimal symbol as special too. * mips-tdep.c (pc_is_mips16): New function to check whether a function is MIPS16 by looking at the minimal symbol. Use pc_is_mips16 throughout instead of IS_MIPS16_ADDR macro. * config/mips/tm-mips.h (SYMBOL_IS_SPECIAL, MAKE_MSYMBOL_SPECIAL, MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): New functions for setting/testing "special" MIPS16 bit in ELF and minimal symbols. * mdebugread.c (parse_partial_symbols): Don't construct a partial symbol table for a file that already has one. Sat Sep 13 08:32:13 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mdebugread.c (parse_symbol, handle_psymbol_enumerators): Handle yet another variant of enumerator debugging info, used by DU 4.0 native cc. Tue Sep 9 20:47:23 1997 Felix Lee * config/i386/windows.mh (XDEPFILES): reduce to libwingdb.a. otherwise link command line is too long. Tue Sep 9 17:41:41 1997 Jeffrey A Law (law@cygnus.com) * symtab.c, dbxread.c, stabsread.c: Fix up ANSI-C isms. Fix some formatting problems. Mon Sep 8 16:45:51 1997 Stu Grossman * ser-e7kpc.c: Don't include w32sut.h. We no longer use the UT mechanism. Remove prototypes for dos_async_* functions. They don't exist anymore. Mon Sep 8 12:48:50 1997 Ian Lance Taylor * top.c (quit_confirm, quit_force): New functions, broken out of quit_command. (quit_command): Just call quit_confirm and quit_force. * top.h (quit_confirm, quit_force): Declare. Sun Sep 7 17:26:30 1997 Dawn Perchik * dbxread.c, buildsym.c, symtab.c, stabsread.c: Add support for reading stabs extensions for live range information. * stabsread.h, partial-stab.h: Add prototypes for new functions. * symtab.h: Add structure for storing live range information. Wed Sep 3 16:39:39 1997 Andrew Cagney * top.c (set_arch): New function, update target_architecture. * defs.h, top.c (set_architecture_from_arch_mach): Replace set_architecture, takes the arch and machine as arguments. * sh3-rom.c (sh3e_open): Update. (sh3_open): Ditto. Tue Sep 2 12:00:46 1997 Andrew Cagney * remote-e7000.c (e7000_fetch_registers): Fix typo, stray paren. (e7000_wait): Ditto. Mon Sep 1 11:21:03 1997 Andrew Cagney * top.c (init_main): Add ``set processor'' as an alias for ``set architecture''. Sat Aug 30 13:44:48 1997 Bob Manson * config/sparc/sparclite.mt: Removed simulator references (erc32 has been disabled). Thu Aug 28 10:20:04 1997 Andrew Cagney * remote-e7000.c (e7000_fetch_registers): Check target_architecture instead of sh_processor_type. (e7000_wait): Ditto. * config/sh/tm-sh.h (sh_set_processor_type): Delete prototype. * sh3-rom.c (sh3_open): Call set_architecture not sh_set_processor_type. (sh3e_open): Ditto. * sh-tdep.c (sh_show_processor_type_command): Delete. (sh_set_processor_type_command): Delete. (sh_target_architecture_hook): Rename from sh_set_processor_type, use AP to determine architecture. (sh_show_regs): Use bfd_mach_sh* types. * remote-sim.c (gdbsim_open): Pass --arch=XXX to simulator when architecture was specified explicitly. * defs.h (target_architecture, target_architecture_auto, set_architecture, set_architecture_from_file): Declare. (target_architecture_hook): Allow targets to be notified of set arch commands. * top.c (init_main): Add set/show/info architecture commands. (set_architecture, show_architecture, info_architecture): New functions, parse same. (set_architecture_from_file): New function, determine arch from BFD. Tue Aug 26 17:13:43 1997 Andrew Cagney * remote-sim.c (gdbsim_open): Only pass endianness to sim_open when set explicitly. Prepend endianness arg so that it can be overridden. * defs.h, top.c (target_byte_order_auto): Make global when byteorder is selectable. Tue Aug 26 15:19:56 1997 Andrew Cagney * remote-sim.c (gdbsim_create_inferior): Pass exec_bfd into sim_create_inferior. (gdbsim_create_inferior): Pass -1 to proceed, sim_create_inferior has already set the PC. (gdbsim_create_inferior): Allow exec_file to be NULL, make "No exec file" a warning. Ditto for "No program loaded". Mon Aug 25 17:08:01 1997 Geoffrey Noer * ocd.c: revert Sun change -- enable log file handling Mon Aug 25 12:21:46 1997 Andrew Cagney * remote-sim.c (gdbsim_open): Pass exec_bfd to sim_open call. Sun Aug 24 21:16:59 1997 Geoffrey Noer * ocd.c: comment out sections that create and flush wigglers.log log file when using the wiggler. Thu Aug 21 16:18:08 1997 Geoffrey Noer * config/powerpc/ppc-eabi.mt: * config/powerpc/ppc-sim.mt: * config/powerpc/ppcle-eabi.mt: * config/powerpc/ppcle-sim.mt: ser-ocd.c needs to be before other ocd-related files in TDEPFILES Thu Aug 21 14:56:04 1997 Geoffrey Noer * ppc-bdm.c (bdm_ppc_wait): stop printfing ecr, der * ocd.c: initialize remote_timeout (ocd_wait): while looping, call ocd_do_command with OCD_AYT (ocd_get_packet): remove find_packet goto. If there isn't an 0x55 at the start, something is quite wrong so error out instead of advancing in the packet and trying again. If checksum is invalid, print error message instead of trying again. * ser-ocd.c (ocd_readchar): error if we attempt to read past the end of the from_wiggler_buffer. Wed Aug 20 14:08:39 1997 Stan Shebs * dink32-rom.c: Don't use "mf" command to fill, is too picky about alignment. Tue Aug 19 08:41:36 1997 Fred Fish * objfiles.c (objfile_relocate): Add call to breakpoint_re_set after relocations are complete. * remote-vx.c (vx_add_symbols): Remove call to breakpoint_re_set, this is now done in objfile_relocate. Mon Aug 18 17:29:54 1997 Ian Lance Taylor * win32-nat.c (handle_exception): Return a value indicating whether the exception was handled. Don't handle random exceptions the first time around, so that structured exception handling works. (child_wait): Check the return value of handle_exception. Set the continue_status argument to ContinueDebugEvent accordingly. Mon Aug 18 11:14:15 1997 Nick Clifton * configure.tgt: Add support for v850ea target. Sun Aug 17 20:31:57 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * m32r-stub.c: fix typo Sun Aug 17 17:33:34 1997 Stan Shebs * remote-sds.c: Remove unused remnants of remote.c. (tob64): Return the result length. (sds_interrupt): Send a stop message. (sds_wait): Add debug output for signal interpretation, flag that signal was due to a trap. (sds_fetch_registers): Fill the registers array correctly for PowerPC. (sds_store_registers): Get the right values from registers array. (putmessage): Tweak length handling so checksum comes out right. (sds_insert_breakpoint, sds_remove_breakpoint): Do correctly. Fri Aug 15 20:53:13 1997 Ian Lance Taylor * Makefile.in (init.c): Don't use xargs. Fri Aug 15 13:59:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * infrun.c (wait_for_inferior): Add the symbols for any newly loaded objects upon a TARGET_WAITKIND_LOADED event. Rewrite code which determines the TOC address for calling functions in the inferior under AIX. * rs6000-nat.c (find_toc_address): New function to determine the required TOC address from a function address. (_initialize_core_rs6000): Set up find_toc_address_hook to point to find_toc_address. (xcoff_relocate_symtab, xcoff_relocate_core): Remove add_text_to_loadinfo calls. (exec_one_dummy_insn): Change pid and status to int to get rid of compiler warnings. (xcoff_relocate_symtab): Cast ldi to `int *' when passing it to ptrace to get rid of compiler warnings. * rs6000-tdep.c: Add definition for find_toc_address_hook. (rs6000_fix_call_dummy): If find_toc_address_hook is non zero, patch TOC address load code in the call dummy with the value returned from find_toc_address_hook. (struct loadinfo, loadinfo, loadinfolen, loadinfotextindex, xcoff_init_loadinfo, free_loadinfo, xcoff_add_toc_to_loadinfo, add_text_to_loadinfo, find_toc_address): Remove. (_initialize_rs6000_tdep): Remove initialization of coff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook. * xcoffread.c (coff_add_toc_to_loadinfo_hook, xcoff_init_loadinfo_hook): Remove. (struct coff_symfile_info): Add toc_offset field. (scan_xcoff_symtab): Record toc_offset value in toc_offset field instead of calling xcoff_add_toc_to_loadinfo_hook. (get_toc_offset): New function to return the value of the toc_offset field for an object file. (xcoff_initial_scan): Remove call of xcoff_init_loadinfo_hook. * xcoffsolib.h (add_text_to_loadinfo): Remove declaration. * config/rs6000/tm-rs6000.h: Add declarations for find_toc_address_hook and get_toc_offset. Wed Aug 13 19:31:28 1997 Stan Shebs * remote-sds.c: New file, interface to SDS-compatible monitors. * Makefile.in (remote-sds.o): Add build rule. * config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt (TDEPFILES): Add remote-sds.o. Tue Aug 12 14:37:18 1997 Geoffrey Noer * ocd.c (ocd_wait): loop until we're in BDM mode instead of assuming control has returned to GDB. Mon Aug 11 19:16:04 1997 Stan Shebs * dink32-rom.c: New file, support for DINK32 monitor. * Makefile.in (dink32-rom.o): Add build rule. * config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt (TDEPFILES): Add dink32-rom.o. * monitor.h (MO_32_REGS_PAIRED, MO_SETREG_INTERACTIVE, MO_SETMEM_INTERACTIVE, MO_GETMEM_16_BOUNDARY, MO_CLR_BREAK_1_BASED): New monitor interface flags. * monitor.c: Use them. (monitor_store_register): Use setreg.term if defined. (monitor_insert_breakpoint, monitor_remove_breakpoint): Notice if set_break and clr_break fields are empty. Mon Aug 11 16:22:36 1997 Geoffrey Noer * ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Macro BDM_BREAKPOINT already has braces around it, remove erroneous ones. * ser-ocd.c (ocd_write): Conditionalize on _WIN32 instead of __CYGWIN32__. * config/powerpc/tm-ppc-eabi.h: Remove BDM_NUM_REGS, BDM_REGMAP * ppc-bdm.c: move BDM_NUM_REGS, BDM_REGMAP here from tm.h file, fill in doc fields of bdm_ppc_ops. (bdm_ppc_fetch_registers): Don't ask for invalid registers such as the MQ or floating point regs not present on ppc 8xx boards. (bdm_ppc_store_registers): Don't write those same invalid registers. * config/i386/cygwin32.mh: Stop including ocd.o ser-ocd.o. * config/powerpc/ppc-eabi.mt: * config/powerpc/ppcle-eabi.mt: * config/powerpc/ppc-sim.mt: * config/powerpc/ppcle-sim.mt: Include ser-ocd.o. Mon Aug 11 16:08:52 1997 Fred Fish * frame.h (enum lval_type): Conditionalize on __GNUC__ instead of __STDC__. Sun Aug 10 19:08:26 1997 Jeffrey A Law (law@cygnus.com) * utils.c (error): Fix return type for !ANSI_PROTOTYPES. Sun Aug 10 16:49:09 1997 Geoffrey Noer * ocd.c: move ocd_write_bytes proto to ocd.h since it is used by ppc-bdm.c, use OCD_LOG_FILE to help debugging, define BDM_BREAKPOINT if not defined in tm.h (ocd_error): add new error cases (ocd_start_remote): send the OCD_INIT command before OCD_AYT and OCD_GET_VERSION calls, 80 was correct speed after all (ocd_write_bytes): no longer static (ocd_insert_breakpoint): no longer static (ocd_remove_breakpoint): new * ocd.h: add protos for ocd_write_bytes, ocd_insert_breakpoint, and ocd_remove_breakpoint * ppc-bdm.c: change bdm_ppc_ops so we call ocd_insert_breakpoint and ocd_remove_breakpoint instead of memory_insert_breakpoint and memory_remove_breakpoint. (bdm_ppc_open): after calling ocd_open, modify DER register so interrupts will drop us into debugging mode, finally disable the watchdog timer on the board so we don't leave BDM mode unexpectedly. Sat Aug 9 01:50:14 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * values.c (value_primitive_field): Account for offset when extracting the value of a bitfield. From Paul Hilfinger . Fri Aug 8 21:35:44 1997 Mark Alexander * config/tic80/tic80.mt: (GDBSERVER-DEPFILES, GDBSERVER_LIBS): Define for gdbserver. (SIM): Remove -lm to prevent make errors. * configure.tgt: add gdbserver to configdirs for tic80. * gdbserver/utils.c (error): Change prototype to match defs.h. * gdbserver/low-sim.c: Change simulator calls to use new interface. * remote.c (remote_write_bytes): Include '$' at start of packet and checksum at end of packet in overhead calculation. Fri Aug 8 15:59:24 1997 Ian Lance Taylor * ser-ocd.c: If _WIN32, include . (dll_do_command): New static variable if _WIN32. (ocd_open): Set dll_do_command if _WIN32. (ocd_write): Use dll_do_command rather than do_command. * config/i386/cygwin32.mh (XDEPFILES): Remove libwigglers.a. (BDM_DLLNAME, BDM_LIBNAME, BDM_DEFFILE): Don't define. ($(BDM_LIBNAME)): Remove target. * wigglers.def: Remove. * config/i386/cygwin32.mh ($(BDM_LIBNAME)): Rename target from libwigglers.def. (libwigglers.a): Remove target. Fri Aug 8 13:11:01 1997 Mike Meissner * config/powerpc/ppc{,le}-{eabi,sim}.mt (TDEPFILES): Make sure ppc-bdm.o and ocd.o are used for all powerpc-eabi targets. Thu Aug 7 19:40:52 1997 Geoffrey Noer Changes to OCD support to support wiggler box as well as target boxes: * ocd.c: change speed in init command to 0 from 80, add (temporary) logging commands to help debugging, (ocd_open): if "target ocd wiggler lpt" then use special ser-ocd.c serial interface which communicates with Wigglers.dll, otherwise ("target ocd ") do as we did before (ocd_get_packet): add OCD_LOG_FILE and OCD_SET_CONNECTION to switch of known commands of len 0 * ocd.h: add OCD_LOG_FILE * serial.c (serial_open): do serial_interface_lookup on ocd in the case of ocd * ser-ocd.c: add buffer to contain responses from sending a command to the Wigglers.dll. (ocd_readchar): return curr char from buffer and increment ptr (ocd_write): send buffer to Wigglers.dll, storing response in return buffer and initializing curr location ptr to start of buffer. Thu Aug 7 13:39:31 1997 Geoffrey Noer * ocd.h: add OCD_SET_CONNECTION * ocd.c: rename "do_command" to "ocd_do_command" Thu Aug 7 13:09:17 1997 Geoffrey Noer Nomenclature change. BDM is a specific type of OCD (On Chip Debugging). Wiggler is the parallel port box controlled by Wigglers.dll. The faster target box from Macraigor Systems is not a wiggler. * ocd.c: * ocd.h: * ppc-bdm.c: * ser-ocd.c: Replace all instances of "wiggler_" with "ocd_" and change most other instances of "wiggler" to "ocd" or "ocd device" depending on context. * config/m68k/monitor.mt: remove remote-wiggler.o from TDEPFILES until OCD with that target is supported again. Wed Aug 6 16:15:31 1997 Geoffrey Noer * Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to sub makes, change clean rule to also remove *.a to remove libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and remove remote-wiggler.o * configure.in: add DLLTOOL support * configure: regenerate * wigglers.def: new file for imports for wigglers.dll * ser-ocd.c: new file which is layer between ocd.c and either the wigglers.dll or the target box, only stub so far * config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES * config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES * config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a to XDEPFILES, add rules to build libwigglers.a checking in changes of Stu Grossman : * remote-wiggler.c: delete * ocd.c: new, was remote-wiggler.c always include sys/types.h, include ocd.h, move WIGGLER commands and many wiggler prototypes to ocd.h, make wiggler_desc static, stop making local wiggler functions static, define write_mem_command for wiggler_write_bytes (wiggler_start_remote): stop hardcoding the target type, instead set and use a target_type variable. (wiggler_open): add new target_type and ops args (wiggler_wait): now no longer takes pid and target_status as args, stop trying to set target_status struct, remove BGND insn checks (read_bdm_registers): renamed to wiggler_read_bdm_registers (wiggler_read_bdm_registers): numregs arg changed to reglen arg, remove pktlen check, set reglen instead of numregs (dump_all_bdm_regs): delete (wiggler_fetch_registers): delete (wiggler_prepare_to_store): now just an empty function (wiggler_store_registers): delete (wiggler_read_bdm_register): new (wiggler_write_bdm_registers): new (wiggler_write_bdm_register): new (wiggler_write_bytes): use write_mem_command variable instead of WIGGLER_WRITE_MEM (get_packet): renamed to wiggler_get_packet, change refs throughout (put_packet): renamed to wiggler_put_packet, change refs throughout (wiggler_get_packet): add break to default case of switch, change length of WIGGLER_GET_VERSION len to 10 from 4 to match specs (wiggler_mourn): unpush_target with current_ops, not &wiggler_ops (flash_xfer_memory): delete (noop_store_registers): new placeholder replacement for target_store_registers() which prevents generic_load from trying to set up the PC. (bdm_update_flash_command): add store_registers_tmp variable, make handling of wiggler_ops more generic -- define wiggler_ops in a target-specific file instead (such as ppc-bdm.c in the case of the ppc), use current_target to deal with registers again making this file less target-specific. (bdm_read_register_command): new (_initialize_remote_wiggler): stop doing add_target (&wiggler_ops), comment out add_cmd ("read-register", ...) * ocd.h: new, contains common wiggler prototypes, command definitions * ppc-bdm.c: file for ppc-specific OCD code, including target_ops structure for ppc bdm (bdm_ppc_open): new (bdm_ppc_wait): new (bdm_ppc_fetch_registers): new (bdm_ppc_store_registers_: new (_initialize_bdm_ppc): new * config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines Tue Aug 5 23:56:14 1997 Mark Alexander * tic80-tdep.c (tic80_init_extra_frame_info): Allow zero as a valid SP-relative offset of a saved register. Wed Aug 6 00:24:08 1997 Jeffrey A Law (law@cygnus.com) * hpread.c (hpread_read_struct_type): Use accessor macros rather than directly mucking around with data structures. Tue Aug 5 13:37:14 1997 Per Bothner * gdbtypes.h: Re-interpret struct field. Suppport address of static. Add a bunch of macros. * coffread.c, dwarf2read.c, dwarfread.c, mdebugread.c, stabsread.c: Update to use new macros. * coffread.c, hpread.c, stabsread.c: Remove bugus TYPE_FIELD_VALUE. * value.h, values.c (value_static_field): New function. * cp-valprint.c, valops.c: Modify to use value_static_field. * jv-lang.c (get_java_utf8_name): Re-write so it works with implied (missing) data field, as defined by cc1java. (java_link_class_type): Type length and field offset (in interior) now includes object header. Get static fields working. * jv-lang.h (JAVA_OBJECT_SIZE): Update for change in Kaffe. * jv-typeprint.c (java_type_print_derivation_info, java_type_print_base): New functions, for better Java output. * jv-valprint.c: Start to support Java-specific output. Sun Aug 3 08:18:09 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * c-valprint.c (c_val_print): Use extract_address to retrieve the address of the virtual function. From Peter Bloecher (Peter.Bloecher@eedn.ericsson.se). * eval.c (evaluate_subexp_standard), valarith.c (value_x_unop): Handle C++ operator *. Fri Aug 1 15:21:44 1997 Ian Lance Taylor * configure.in: Check for cygwin32 environment. Define and substitute WIN32LIBS and WIN32LDAPP. Always set configdir to unix; setting it to win was for an old Tcl/Tk configuration scheme. * Makefile.in (TK_CFLAGS): Add @TK_BUILD_INCLUDES@. (WIN32LDAPP, WIN32LIBS): Define. (CLIBS): Add $(WIN32LIBS). (gdb): Use $(WIN32LDAPP). * configure: Rebuild. Thu Jul 31 15:40:19 1997 Per Bothner * symtab.h (SYMBOL_INIT_LANGUAGE_SPECIFIC, SYMBOL_INIT_DEMANGLED_NAME, SYMBOL_DEMANGLED_NAME): Add demangling support for Java. * utils.c (fprintf_symbol_filtered): Handle language_java. * symtab.c (decode_line_1): Handle Java-style package.class.method. Wed Jul 30 14:04:18 1997 Per Bothner * java-*: Renamed to jv-*, to make fit within 14 characters. * jv-lang.h (java_type_print): Added declaration. * jv-typeprint.c: New file. Provides java_print_type. * jv-lang.c (java_link_class_type): New function. (java_language_defn): Replace c_print_type by java_print_type. * Makefile.in: Update accordingly. Tue Jul 29 10:12:44 1997 Felix Lee * Makefile.in (init.c): except some mswin files do need to be scanned. oh well. Mon Jul 28 14:04:39 1997 Felix Lee * Makefile.in (init.c): don't try to scan mswin for _initialize funcs. (generates misleading error message because files have .cpp suffix, not .c suffix) Mon Jul 28 13:27:21 1997 Felix Lee * ser-e7kpc.c: -> "mswin/w32sut.h" Mon Jul 28 02:54:31 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * xcoffread.c (coff_getfilename): Do not strip directory component of filename. Fri Jul 25 15:16:15 1997 Felix Lee * mon960-rom.c: removed unused #includes; no ioctl.h in Windows. * nindy-share/ttyflush.c: find sleep() for _MSC_VER. * remote-array.c: #include for isascii(). * utils.c (notice_quit,pollquit): cleanup. _WIN32 -> _MSC_VER. Fri Jul 25 16:48:18 1997 Jeffrey A Law (law@cygnus.com) * top.c (execute_command): Force cleanup of alloca areas. * findvar.c (registers_changed): Likewise. Fri Jul 25 15:37:15 1997 Stu Grossman * v850ice.c: Include . Support new v850 DLL interface. * Add defs for target status. Tue Jul 22 12:11:48 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * config/mips/tm-mips64.h: longs, long longs, and pointers are all 64 bits on EABI mips targets. Thu Jul 17 11:38:46 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * partial-stab.h (case N_BINCL): detect missing partial symtab. * dbxread.c: Add a complaint for N_BINCL without a corresponding partial symtab. Remove earlier change of 5/27/97. Wed Jul 16 10:38:03 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * sol-thread.c (sol_thread_[store, fetch]_registers): if inferior_pid is an LWP rather than a Solaris thread, let procfs handle the request. (rw_common, sol_thread_xfer_memory): procfs_xfer_memory will only work if inferior_pid points to an LWP (rather than a Solaris thread). Use procfs_first_available to find a good LWP. (info_solthreads): added a maintenance command to list all known Solaris threads and their attributes. * mips-tdep.c (mips_do_registers_info): Completely changed the output format to be neat and columnar. Added the helper funcs do_fp_register_row and do_gp_register_row. Also small mods to mips_print_register, which is still used to print a single reg. Mon Jul 14 18:02:53 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * procfs.c (wait_fd): Handle an fd that has "hung up" or otherwise terminated (Solaris threads). Thu Jul 10 00:02:41 1997 Martin M. Hunt * defs.h (init_ui_hook): Change prototype to accept one arg. * main.c (gdb_init): Change prototype to accept one arg. * top.c (gdb_init): Accepts one argument which it uses to call (*init_ui_hook). Fri Jul 4 14:49:33 1997 Ian Lance Taylor * source.c (OPEN_MODE, FDOPEN_MODE): Define; value depends upon whether CRLF_SOURCE_FILES is defined. (open_source_file): Use OPEN_MODE with open and openp. (print_source_lines): Use FDOPEN_MODE with fdopen. If CRLF_SOURCE_FILES is defined, ignore \r characters. (forward_search_command): Use FDOPEN_MODE with fdopen. (reverse_search_command): Likewise. * config/i386/xm-cygwin32.h (CRLF_SOURCE_FILES): Define. (LSEEK_NOT_LINEAR): Don't define. Thu Jul 3 17:41:46 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * mips-tdep.c (mips_extract_return_value): align 4-byte float return values within the 8-byte FP register. Thu Jul 3 13:48:11 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * mips-tdep.c (mips_push_arguments): don't left-adjust 32-bit integers in 64-bit register parameters before function calls. Mon Jun 30 17:54:51 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * mips-tdep.c (mips_push_arguments): special-case handling for odd-sized struct parameters passed in registers / on stack. Mon Jun 30 15:30:38 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * mips-tdep.c (mips_push_arguments): tweak alignment of small structs passed in registers for little-endian non-EABI mode. Mon Jun 30 13:05:39 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * breakpoint.c (frame_in_dummy): use generic dummy if available. (check_duplicates, clear_command): compare sections only if doing overlay debugging. Fri Jun 27 23:03:53 1997 Fred Fish * buildsym.h (struct subfile): Add debugformat member. (record_debugformat): Declare global function. * buildsym.c (start_subfile): Initialize debugformat member to NULL. (record_debugformat): New function to record the format. (end_symtab): Copy format into symtab debugformat member. (end_symtab): Free subfile debugformat member. * symmisc.c (free_symtab): Free debugformat when freeing symtab. * symfile.c (allocate_symtab): Initialize the new debugformat member for new symtabs. * symtab.h (struct symtab): Add debugformat member. * source.c (source_info): Print the debug format. * os9kread.c (os9k_process_one_symbol): Call record_debugformat with "OS9". * hpread.c (hpread_expand_symtab): Call record_debugformat with "HP". (hpread_process_one_debug_symbol): Ditto. * dbxread.c (process_one_symbol): Call record_debugformat with "stabs". * coffread.c (coff_start_symtab): Call record_debugformat with "COFF". * xcoffread.c (read_xcoff_symtab): Call record_debugformat with "XCOFF". * dwarfread.c (read_file_scope): Call record_debugformat with "DWARF 1". * dwarf2read.c (read_file_scope): Call record_debugformat with "DWARF 2". * dstread.c (dst_end_symtab): Set debugformat to be "Apollo DST". * mdebugread.c (new_symtab): Set debugformat to be "ECOFF". Fri Jun 27 21:05:45 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * mips-tdep.c (mips_push_arguments): handle alignment of integer and struct args on stack for mips64 big-endian. Fri Jun 27 19:19:12 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * config/mips/tm-mips.h (USE_STRUCT_CONVENTION): MIPS_EABI returns structs in a register wherever possible. * mips-tdep.c (mips_extract_return_value): handle structs. (mips_store_return_value): handle values smaller than MIPS_REGSIZE (including structs, if gdb ever allows it). Fri Jun 20 17:58:34 1997 Fred Fish * sh-tdep.c (sh_skip_prologue): Also recognize fmov insns. (sh_frame_find_saved_regs): Recognize fmov insns and adjust stack push count accordingly. * sh-tdep.c (IS_FMOV, FPSCR_SZ): New defines Thu Jun 19 08:18:48 1997 Mark Alexander * utils.c (floatformat_from_doublest): Improve test for infinity. Wed Jun 18 13:47:52 1997 Fred Fish * dwarfread.c (isreg, optimized_out, offreg, basereg): Move global variables into the struct dieinfo structure. (locval): Pass pointer to a dieinfo struct rather than a pointer to the raw location information. Change prototype. Set isreg, optimized_out, offreg and basereg as appropriate. (struct_type): Call locval with dieinfo struct pointer. (new_symbol): Ditto. (new_symbol): Call locval and save location before testing the values of the new dieinfo struct flags, set by locval. Tue Jun 17 13:30:12 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * procfs.c (proc_set_exec_trap, procfs_init_inferior, procfs_wait, unconditionally_kill_inferior): Undo Oct 26 1996 and Apr 26 1997 changes to trace PRFS_STOPTERM and handle PR_DEAD. These changes tried to work around a problem with an early DU 4.0 release, but they trigger subtle timing dependent kernel bugs in older OSF/1 releases. Tue Jun 17 06:52:47 1997 Fred Fish * dwarfread.c (new_symbol): Use SYMBOL_VALUE_ADDRESS, instead of SYMBOL_VALUE, to set the value of LOC_STATIC symbols. Mon Jun 16 18:38:28 1997 Mark Alexander * infrun.c (wait_for_inferior): Mark registers as invalid when stepping over an instruction that triggered a watchpoint. * remote-mips.c: Numerous changes to support hardware breakpoints and watchpoints on LSI MiniRISC and TinyRISC boards. * mips-tdep.c: Move MIPS16-related macros to config/mips/tm-mips.h. (mips_breakpoint_from_pc): Account for different breakpoint instructions used by PMON and IDT monitor. * config/mips/tm-embed.h: Enable hardware breakpoints on embedded MIPS targets. * config/mips/tm-mips.h: Define breakpoint instructions for PMON and IDT monitor. Move MIPS16-related macros here from mips-tdep.c. Fri Jun 13 13:44:47 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * config/mips/tm-tx39[l].h, tx39[l].mt: change r3900 target to tx39. Fri Jun 13 14:14:10 1997 Jeffrey A Law (law@cygnus.com) * mn10300-tdep.c (mn10300_analyze_prologue): Fix some comments. Add missing return statements after finding an "add imm{16,32},sp" instruction. (mn10300_frame_chain): Add in size of our register save area to find our caller's frame if our caller does not have a frame pointer. Fri Jun 13 12:55:49 1997 Doug Evans * symfile.c (generic_load): Check return code of target_write_memory. Fri Jun 13 10:28:09 1997 Fred Fish * config/i386/nm-linux.h: Enable prototypes that were #ifdef out. * config/tm-sysv4.h (in_plt_section): Add prototype. * maint.c (maintenance_translate_address): Avoid assignment inside if, per GNU coding standards. * symfile.c (simple_read_overlay_table): Avoid assignments inside if, per GNU coding standards. * monitor.c (parse_register_dump): Is really a void function. Add prototype. (monitor_read_memory): Remove unused variable "name". (monitor_read_memory): Remove unused variable "regbuf". (monitor_open): Remove unused variable "i". (get_hex_word): Apparently unused, #if away for now. (from_hex): Ditto. * i386v4-nat.c (supply_fpregset): Remove unused variable "regi". (fill_fpregset): Remove unused variables "regi", "to", "from" and "registers". * remote-e7000.c (ctype.h): Include. (e7000_insert_breakpoint): #if away unused arg used by unused expr. * frame.h (generic_get_saved_register): Add prototype. (enum lval_type): Add partial forward decl. * dsrec.c (make_srec): Remove unused variable "type_code". * remote-sim.c (gdbsim_wait): Handle sim_running and sim_polling cases by just ignoring them. (command.h): Include. * java-exp.y (parse_number): Remove unused variable "unsigned_p". * java-lang.c (gdbcore.h): Include for prototypes. (type_from_class): Remove unused variable "ftype". (type_from_class): Remove unused variable "name_length". (evaluate_subexp_java): Add default case to handle remaining enumerations. * java-valprint.c (c-lang.h): Include for prototypes. * symfile.c (simple_read_overlay_region_table): #if away unused function. (simple_free_overlay_region_table): Ditto. (overlay_is_mapped): Add default case to switch. (simple_read_overlay_region_table): Ditto. (simple_read_overlay_region_table): Add prototype. * symtab.c (fixup_symbol_section): Remove unused msym variable. (fixup_psymbol_section): Ditto. (find_pc_sect_symtab): Make distance a CORE_ADDR. * utils.c: Add comment about t_addr being either unsigned long or unsigned long long. (paddr): Change formats to match actual types args are cast to. (preg): Ditto. (paddr_nz): Ditto. (preg_nz): Ditto. * defs.h (perror_with_name): Is a NORETURN function. * utils.c (perror_with_name): Is a NORETURN function. (error): Is NORETURN independently of ANSI_PROTOTYPES. * symtab.c (fixup_symbol_section): Remove prototype. * symtab.h: (fixup_symbol_section): Add prototype. * m32r-rom.c (report_transfer_performance): Add prototype. * sparclet-rom.c: Ditto. * dsrec.c: Ditto. * c-exp.y (parse_number): Cast args to float* or double* as appropriate for conversion format. * java-exp.y (parse_number): Ditto. * Makefile.in (c-exp.tab.c): Remove #line lines that refer to nonexistant y.tab.c file. (java-exp.tab.c): Ditto. (f-exp.tab.c): Ditto. (m2-exp.tab.c): Ditto. * sh-tdep.c (symfile.h): Include. (gdb_string.h): Include. (sh_fix_call_dummy): Ifdef away, currently unused. * config/sh/tm-sh.h (pop_frame): Add prototype. * config/sh/tm-sh.h (sh_set_processor_type): Add prototype. Sat Jun 7 02:34:19 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * eval.c (evaluate_subexp_for_sizeof): Handle dereferencing of non-pointer values. * symtab.c (gdb_mangle_name): Improve mangling of nested types, their physical names already include the class name. * valops.c (value_cast): Handle upcast of a class pointer. From Andreas Schwab (schwab@issan.informatik.uni-dortmund.de): * corelow.c (get_core_registers): Make secname big enough. Fri Jun 6 14:43:23 1997 Keith Seitz * config/sh/tm-sh.h: add define for FPSCR_REGNUM * sh-tdep.c (sh_show_regs): print out all registers for the current processor Fri Jun 6 13:01:55 1997 Andrew Cagney * remote-sim.c (gdbsim_kill): Remove call to depreciated function sim_kill. Thu Jun 5 11:39:03 1997 Ian Lance Taylor Fixes for recent correction to PE format: * coffread.c (pe_file): New static variable. (struct find_targ_sec_arg): Change resultp from pointer to int to pointer to pointer to asection. (find_targ_sec): Just store the section in args->resultp, not the section offset value. (cs_to_section): Compute the section offset value from the section. (cs_section_address): New static function. (coff_symfile_read): Set pe_file. (read_one_sym): When reading a PE file, adjust the symbol value to include the section address if the symbol has an appropriate storage class. Tue Jun 3 16:24:46 1997 Michael Snyder (msnyder@cleaver.cygnus.com) * configure.tgt: add mipsr3900-elf target * config/mips/r3900.mt r3900l.mt tm-r3900.h tm-r3900l.h: ditto Tue May 27 10:34:11 1997 Michael Snyder * dbxread.c: Check malloc's return for null, prevent segv. Fri May 23 14:45:02 1997 Bob Manson * infcmd.c (jump_command): Don't try to dereference sfn if it's NULL. Fri May 23 13:51:57 1997 Andrew Cagney * top.c (init_cmd_lists): Always initialize endianlist. (init_main): Always define endian commands. (set_endian_big): Issue warning if endian not selectable. (set_endian_little): Ditto. (set_endian_auto): Ditto. Thu May 22 11:53:21 1997 Andrew Cagney * remote-sim.c (simulator_command): Restrict access to the simulator to periods when the simulator is open. Wed May 21 16:03:25 1997 Michael Snyder * procfs.c (init_procinfo): new function, abstracts some code shared by create_procinfo and do_attach; (procfs_set_inferior_syscall_traps): new function, abstracts some code needed by procfs_init_inferior, do_attach, and procfs_lwp_creation_handler; (procfs_first_available): new function, find any LWP that's runnable; (procfs_thread_alive): replace stub function with real implementation; (procfs_lwp_creation_handler): fix bug starting new child threads; (info_proc): bug fixes and enhancements for the "INFO PROCESSES" command; (close_procinfo_file): call new function "delete_thread" to cleanup GDB's thread database; (proc_init_failed): add new argument "kill", to control whether process is killed (so this function can be shared by create_procinfo and do_attach); (procfs_exit_handler): handle exit from an attached process, and cleanup procinfo handles when the process exits; (procfs_resume, procfs_wait): cleanup after a thread when it exits; (do_attach, do_detach): handle attached processes with multiple threads; plus some general improvements in the diagnostic output. * sol-thread.c (sol_thread_alive): replace stub with real implementation; (thread_to_lwp, lwp_to_thread): enhance to handle threads that may have exited; (sol_thread_attach): add startup setup stuff; (sol_thread_detach): add unpush_target call; (sol_thread_mourn_inferior): add unpush_target call; (sol_thread_wait, sol_thread_resume): enhance to deal with thread exit cleanly; (sol_thread_new_objfile, sol_thread_pid_to_str): detect unsuccessful startup and don't crash; plus some general cleanup. * thread.c (delete_thread): new function, allows targets to notify gdb when a thread is no longer valid. * infrun.c (wait_for_inferior): don't try to detect a new thread on receiving a TARGET_EXITED event. Tue May 20 09:32:02 1997 Andrew Cagney * remote-sim.c (gdbsim_open): Pass callback struct. (init_callbacks): Remove call to sim_set_callbacks. Thu May 15 07:56:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/rs6000/tm-rs6000.h (SIG_FRAME_LR_OFFSET): Define. * rs6000-tdep.c (frameless_function_invocation): Mark frames with a zero PC as frameless to improve backtraces from core dumps caused by dereferencing a NULL function pointer. (frameless_function_invocation, frame_saved_pc, rs6000_frame_chain): Handle frameless functions interrupted by a signal. * sparc-tdep.c (sparc_init_extra_frame_info, sparc_frame_saved_pc): Handle frameless functions interrupted by a signal. Wed May 14 08:58:55 1997 Jeffrey A Law (law@cygnus.com) * mn10200-tdep.c (mn10200_analyze_prologue): Update prologue comments to reflect current reality. Gross attempt at handling out of line prologues. * mn10200-tdep.c (mn10200_skip_prologue): Don't look at the debug symbols to find the end of the prologue. * mn10300-tdep.c (mn10300_skip_prologue): Likewise. Wed May 14 12:04:49 1997 Andrew Cagney * config/tic80/tm-tic80.h (NUM_REGS): 38 not 37. Mon May 12 11:35:04 1997 Mark Alexander * tic80-tdep.c, config/tic80/tm-tic80.h: First cut at getting basic C80 features working. Thu May 8 08:42:47 1997 Andrew Cagney * configure.in (AC_TYPE_SIGNAL): Add * configure: Re-generate. * remote-sim.c: Signal returns RETSIGTYPE. Wed May 7 20:05:07 1997 Andrew Cagney * target.h (target_stop): Drop argument so it can be tested for NULL. Sat May 3 20:51:48 1997 Mark Alexander * utils.c (floatformat_from_doublest): Handle infinity properly. Thu May 1 11:44:46 1997 Michael Snyder * Finalize merge from Hurd folk. Mon Oct 30 16:41:04 1995 Miles Bader * thread.c (thread_apply_command, thread_apply_all_command, thread_command): Make sure TP is alive. (thread_alive): New function. Tue Nov 14 14:31:03 1995 Miles Bader * infrun.c (sig_print_info): Deal better with long signal names. Wed Nov 22 15:23:35 1995 Miles Bader * thread.c (thread_id_to_pid): New function. Fri Dec 1 13:25:25 1995 Miles Bader * gnu-nat.c: (set_thread_cmd_list, show_thread_cmd_list, set_thread_default_cmd_list, show_thread_default_cmd_list): New variables. (set_thread_cmd, show_thread_cmd, set_thread_default_cmd, show_thread_default_cmd): New functions. Fri Apr 18 15:20:16 1997 Miles Bader * gnu-nat.c (inf_startup): remove TASK parameter. (inf_set_task): replace with new function (inf_set_pid). * gdbthread.h: Add extern decl for thread_cmd_list. Thu May 1 02:28:21 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * printcmd.c (disassemble_command): Adjust low function bound by FUNCTION_START_OFFSET. Wed Apr 30 15:23:02 1997 Andrew Cagney * config/tic80/tm-tic80.h (BREAKPOINT): Set it to trap 73. Mon Apr 28 21:25:32 1997 Michael Snyder * Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd) * config/i386/i386gnu.mh: remove rules for [i386]gnu-nat.o, now in Makefile.in (as for other targets); add NATDEPFILE corelow.o to satisfy symbol dependancy in solib.c (core_ops). * target.[ch] conditionalize Mach-specific signals so that they won't show up in non-Mach gdb's! * thread.c: change name of static function "thread_switch" to "switch_to_thread", to avoid conflict with Mach global symbol; move thread_cmd_list to global scope so targets can add their own thread commands. * infrun.c: sig_print_info: allow for long signal names. * gnu-nat.[ch]: tidying up comments. * gnu-nat.c: remove calls to prune_threads and renumber_threads; gnu_wait must not return -1 when inferior exits; attach_to_child will modify inferior_pid in a way that allows fork_inferior to remain unchanged; remove extra arg from startup_inferior; move Mach thread commands here from thread.c. Mon Apr 28 18:21:20 1997 Michael Snyder * symtab.c: decode_line_1, replace the assignment to values.sals[0].pc which I accidentally left out on 4/3/97. Mon Apr 28 17:27:40 1997 Michael Snyder * c-exp.y: make parse_number reject "123DEADBEEF". (fix by Bob Manson). * java-exp.y: Ditto. * top.c: change "to enable to enable" to "to enable" in a couple of help strings. Mon Apr 28 09:01:59 1997 Mark Alexander * breakpoint.c (remove_breakpoint): Pass correct type to target_remove_watchpoint. * target.h: Improve comment for target_{remove,insert}_breakpoint. Sat Apr 26 03:38:02 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * alpha-tdep.c (heuristic_proc_desc): Increase search limit for return address register, handle `ret' instruction. * corelow.c (get_core_registers): Initialize cf. * procfs.c: Minor changes to make pre-ANSI compilers happy. (procfs_notice_signals): Copy traced signal set back to pi->prrun.pr_trace. (unconditionally_kill_inferior): If PR_DEAD is defined, rerun inferior after killing it. Fri Apr 25 00:10:18 1997 Jeffrey A Law (law@cygnus.com) * config/mn10300/tm-mn10300.h (EXTRACT_STRUCT_VALUE_ADDRESS): The structure value address is found in $a0 now. * config/mn10200/tm-mn10200.h (EXTRACT_STRUCT_VALUE_ADDRESS): Likewise. Thu Apr 24 13:31:10 1997 Jeffrey A Law (law@cygnus.com) * config/mn10300/tm-mn10300.h (STORE_RETURN_VALUE): Pointers are returned in $a0. (EXTRACT_RETURN_VALUE): Likewise. * mn10300-tdep.c (mn10300_analyze_prologue): Check for a return insn at "pc", not "fi->pc". Thu Apr 24 16:11:47 1997 Andrew Cagney * config/tic80/tm-tic80.h (NUM_REGS): Four 64bit accumulators. (REGISTER_BYTE, REGISTER_RAW_SIZE, REGISTER_SIZE, MAX_REGISTER_RAW_SIZE, REGISTER_VIRTUAL_TYPE): Adjust. (NPC_REGNUM): Tic80 has a delay slot. (R0_REGNUM, Rn_REGNUM, An_REGNUM): For sim, provide base/bound for register blocks. Wed Apr 23 11:18:45 1997 Jeffrey A Law (law@cygnus.com) * config/mn10200/tm-mn10200.h (STORE_RETURN_VALUE): Pointers are returned in $a0. (EXTRACT_RETURN_VALUE): Likewise. Tue Apr 22 11:58:15 1997 Fred Fish * config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Define to use floatformat_ieee_double_littlebyte_bigword for little endian target byte order. * utils.c (floatformat_to_doublest): Create local preswapped copy of input for floatformat_littlebyte_bigword formats. (get_field, put_field): Treat floatformat_littlebyte_bigword the same as floatformat_little. (floatformat_from_doublest): Postswap output words for the floatformat_littlebyte_bigwords format. Mon Apr 21 22:44:47 1997 Andrew Cagney * config/tic80/tic80.mt (SIM): Link in simulator. Tue Apr 22 09:02:10 1997 Stu Grossman (grossman@critters.cygnus.com) * config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh config/mips/{embed embed64 embedl embedl64 vr4300 vr4300el vr5000 vr5000el}.mt config/powerpc/{aix aix4}.mh config/rs6000/{aix aix4}.mh config/sh/sh.mt config/sparc/sp64sim.mt: config/v850/v850.mt: Remove -lm. That's now handled by configure. * Makefile.in (maintainer-clean): Add distclean to dependencies. Remove duplicate rm's of files. Mon Apr 21 09:49:25 1997 Stu Grossman (grossman@critters.cygnus.com) * remote-pa.c: Remove. It's broken and no longer necessary. Sat Apr 19 11:56:10 1997 Per Bothner * java-exp.y: Combine TRUE and FALSE into BOOLEAN_LITERAL. (Avoids name clash with broken AIX header files.) Sat Apr 19 01:49:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * serial.c (serial_log_command): Fix fputs_unfiltered calls. * config/powerpc/tm-ppc-aix4.h, config/rs6000/tm-rs6000-aix4.h (DONT_RELOCATE_SYMFILE_OBJFILE): Removed. * xcoffsolib.h (struct vmap): Add new members tvma, toffs and dvma, remove tadj. * exec.c (bfdsec_to_vmap): Initialize new vmap members, initialize tstart and dstart with section VMA. * rs6000-nat.c (vmap_symtab): Relocate relative to the VMA in the object file. (vmap_ldinfo, xcoff_relocate_core): Adjust tstart by section offset of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack. (vmap_exec): Relocate relative to the VMA in the object file, relocate .bss section as well. (xcoff_relocate_core): No longer adjust section addresses by VMA. * rs6000-tdep.c (find_toc_address): Change type of tocbase to CORE_ADDR. * xcoffread.c (secnum_to_bfd_section): New routine to get BFD section from CS section number. (scan_xcoff_symtab): Make toc_offset section relative. * symtab.c (total_number_of_methods): Avoid core dump if baseclass type is still undefined. Fri Apr 18 17:25:10 1997 Stu Grossman (grossman@critters.cygnus.com) * Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. (readchar): Improve doc. Handle random serial errors. (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. (e7000_parse_device): Remove serial_flag arg. It's not necessary. (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. (gch): Remove debug output. That's handled by readchar. (e7000_read_inferior_memory): Handle errors better. (_initialize_remote_e7000): Get rid of `' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt. Fri Apr 18 13:38:19 1997 Doug Evans * remote-sim.c (gdbsim_open): Only pass -E to sim_open if TARGET_BYTE ORDER_SELECTABLE. Fri Apr 18 16:52:41 1997 Andrew Cagney * remote-sim.c (init_callbacks): Initialize poll_quit and magic fields of gdb_callback. (gdbsim_stop): Add gdbsim_stop to list of supported client operations. (gdbsim_wait, gdbsim_resume): Move call to sim_resume into sim_wait where gdb is in a position to handle a long running function. (gdbsim_cntrl_c): New function. Wrap the sim_resume call in a SIGINT handler. (gdb_os_poll_quit): New function. Check for a quit pending on the console. Thu Apr 17 14:30:04 1997 Per Bothner * objfiles.c (allocate_objfile): Allow NULL bfd argument. * defs.h (enum language): Add language_java. * java-exp.y, java-lang.c, java-lang.h, java-valprint.c: New files. * Makefile.in: Update for new files. * symfile.c (deduce_language_from_filename): Recognize .java. Thu Apr 17 02:20:23 1997 Doug Evans * m32r-stub.c (stash_registers): Rewrite. (restore_registers): Renamed to restore_and_return. (cleanup_stash): New function. (process_exception): New function. (_catchException*): Rewrite. * remote-sim.c (gdbsim_load): Update call to sim_load. (gdbsim_create_inferior): No longer pass start_address to sim_create_inferior. (gdbsim_open): Pass endian indicator as arg. Tue Apr 15 15:31:09 1997 Stan Shebs * remote.c (get_offsets): Don't use scanf for interpreting response to qOffsets. Tue Apr 15 14:51:04 1997 Ian Lance Taylor * gdbserver/Makefile.in (INSTALL_XFORM): Remove. (INSTALL_XFORM1): Remove. (install-only): Use $(program_transform_name) directly, rather than using $(INSTALL_XFORM) and $(INSTALL_XFORM1). (uninstall): Transform name. Mon Apr 14 17:06:27 1997 Mark Alexander * remote-mips.c (mips_load): Ensure that PC gets updated after a load on LSI target. Mon Apr 14 15:54:51 1997 Geoffrey Noer * procfs.c (notice_signals): fix typo Mon Apr 14 16:25:10 1997 Ian Lance Taylor * gdbserver/Makefile.in (INSTALL): Change install.sh to install-sh. Mon Apr 14 11:55:27 1997 Geoffrey Noer * config/i386/cygwin32.mh: remove -lkernel32 from XM_CLIBS since gcc automatically includes it Thu Apr 10 13:20:53 1997 Geoffrey Noer * procfs.c: Substantial (but incomplete) changes to support sysv4.2mp procfs as implemented in UnixWare 2.1. The procinfo struct now has substructs like struct flt_ctl instead of just a fltset_t and has a ctl_fd, status_fd, as_fd, and map_fd instead of a single fd. Non-sysv4.2mp procfs models still have the structs and multiple fds, but don't use the entire struct and the four fds all point to the same thing. We use PROCFS_USE_READ_WRITE to decide whether to talk to procfs with reads/writes or use ioctl instead. We use HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has multiple fds or not. PROC_NAME_FMT is split out into CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT, STATUS_PROC_NAME_FMT. (procfs_notice_signals): now a necessary wrapper around (notice_signals): which are the new guts for noticing signals (open_proc_file): gets a new flag arg used in sysv4.2mp to determine whether or not to attempt to open the ctl_fd. (procfs_read_status): new local function, reads procfs status (procfs_write_pcwstop): new local function, writes a PCWSTOP (procfs_write_pckill): new local function, writes a PCKILL (unconditionally_kill_inferior): remove signo since we now just call procfs_write_pckill(). (procfs_xfer_memory): call lseek with SEEK_SET rather than 0 (proc_iterate_over_mappings): the whole function is ifdefed on UNIXWARE to keep things readable. Expanded the syscall_table to include new potential sysv4.2mp members. Note that all ifdefs of UNIXWARE should be eliminated if possible or renamed to describe what's being selected for a bit better. Sysv4.2mp and IRIX both have SYS_sproc so the IRIX specific code now also checks it's not UNIXWARE. * config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T, HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE * config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to "/debug/%d" as PROC_NAME_FMT used to be Wed Apr 9 11:36:14 1997 Jeffrey A Law (law@cygnus.com) * mn10300-tdep.c: Almost completely rewritten based on mn10200 port. * config/mn10300/tm-mn10300.h: Likewise. Tue Apr 8 10:45:24 1997 Stu Grossman (grossman@critters.cygnus.com) * config/pa/{hppabsd.mt hppahpux.mt hppaosf.mt}: Remove remote-pa.o from TDEPFILES. Nobody uses it, and besides, it's a lousy out-of-date clone of remote.c. Fri Apr 4 08:21:21 1997 Stu Grossman (grossman@critters.cygnus.com) * remote.c: Fix problems realized while showering. * (hexnumlen): Add prototype. Use max, not min. * (remote_write_bytes remote_read_bytes): Fix max packet size calculations to properly account for packet overhead. Also handle (probably rare) case where remote_register_buf_size isn't set. * remote.c: Fix doc for `C' and `S' commands to indicate full address. * (remote_ops extended_remote_ops remote_desc remote_write_size): Make static. * (remote_fetch_registers remote_write_bytes remote_read_bytes): Record size of response to fetch registers command, use this to limit size of memory read and write commands. * (push_remote_target): New function to make it possible to have another target switch to the remote target. * target.h: Add prototype for push_remote_target. * sh-tdep.c (sh_frame_find_saved_regs): Fix sign extension bugs for hosts which default to unsigned chars (such as SGI's). * (_initialize_sh_tdep): Don't set remote_write_size. It's now handled automatically in remote.c. Thu Apr 3 15:10:30 1997 Michael Snyder * blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(), find_pc_sect_function(), find_pc_sect_partial_function(): new functions for debugging overlays; pc without section is ambiguous. * breakpoint.[ch]: add section pointer to breakpoint struct; add section argument to check_duplicates(); check section as well as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(), breakpoint_thread_match(), bpstat_stop_status()]; add section argument to describe_other_breakpoints(); use INIT_SAL() macro to zero-out new sal structures; make resolve_sal_pc() fix up the sal's section as well as its pc; match on section + pc in clear_command() and delete_breakpoint(); account for overlay sections in insert_breakpoints(), remove_breakpoint() and breakpoint_re_set_one(); all this to support overlays where a PC is not unique. * exec.c: change xfer_memory() to handle overlay sections. * findvar.c: change read_var_value() to handle overlay sections. * frame.h: declaration for block_for_pc_sect() [blockframe.c]. * infcmd.c: jump_command() warns against jumping into an overlay that's not in memory. Also use INIT_SAL() to initialize sals. * infrun.c: wait_for_inferior() sets a flag to invalidate cached overlay state information; Also use INIT_SAL() to init sals. * m32r-rom.c: modify load routines to use LMA instead of VMA. * m32r-stub.c: mask exit value down to 8 bits; screen out any memory read/writes in the range 600000 to a00000, and ff680000 to ff800000 (hangs because nothing is mapped there); fix strcpy(). * maint.c: maintenance command "translate-address" supports overlays. * minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays. * objfiles.[ch]: add ovly_mapped field to the obj_section struct; this constitutes gdb's internal overlay mapping table. Add macro ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays. Add function find_pc_sect_section(). * printcmd.c: modify print_address_symbolic() with overlay smarts; modify address_info() with overlay smarts; add function sym_info() to support the INFO SYMBOL command (translate address to symbol(s)); modify disassemble_command() to work on unmapped overlays. * source.c: use INIT_SAL() to initialize sals. * symfile.[ch]: change generic_load() to use section's LMA address instead of VMA address, for overlay sections. Add numerous functions for finding a PC's section / overlay, translating between VMA and LMA address ranges, determining if an overlay section is mapped, etc. Add several user commands for overlay debugging. Add support for a "generic" form of automatically reading overlay mapping info from the inferior (based on the default (simple) overlay manager which Cygnus provides as an example). * symtab.[ch]: add functions find_pc_sect_symtab(), find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line() for lookup; modify lookup_symbol and decode_line_1() to use them; modify find_function_start_sal() to account for overlay sections; add macro INIT_SAL() for initializing struct symtab_and_line. * target.c: fix a comment in the declaration of target_ops. Thu Apr 3 10:31:12 1997 Mark Alexander * mips-tdep.c (mips_in_call_stub, mips_in_return_stub, mips_skip_stub, mips_ignore_helper): New functions for dealing with MIPS16 call/return thunks. (mips_init_frame_pc_first): New function to implement INIT_FRAME_PC_FIRST macro; includes code from old macro plus new code to skip over MIPS16 thunks. (mips_frame_chain): Skip over MIPS16 thunks. * config/mips/tm-mips.h (mips_in_call_stub, mips_in_return_stub, mips_skip_stub, mips_ignore_helper): Declare. (IN_SOLIB_CALL_TRAMPOLINE, IN_SOLIB_RETURN_TRAMPOLINE, SKIP_TRAMPOLINE_CODE, IGNORE_HELPER_CALL): New macros that invoke the above functions. (INIT_FRAME_PC_FIRST): Change to invoke mips_init_frame_pc. (mips_init_frame_pc): Declare. * infrun.c (wait_for_inferior): Use new IGNORE_HELPER_CALL macro to decide if certain library function calls should be ignored. Wed Apr 2 14:16:51 1997 Doug Evans * remote-sim.c (gdbsim_open): Check return code from sim_open. Update call to sim_open (new arg SIM_OPEN_DEBUG). Mon Mar 31 14:55:53 1997 Ian Lance Taylor * gdbinit.in: New file. * .gdbinit: Remove. * configure.in: Generate .gdbinit from gdbinit.in. * configure: Rebuild. Sun Mar 30 12:28:24 1997 Fred Fish * config/tic80/tic80.mt: Disable using the simulator until it is ready. Sat Mar 29 13:57:20 1997 Fred Fish * COPYING: Install new version of file from FSF. * copying.c (show_copying_command): Update FSF address. Fri Mar 28 18:33:41 1997 Ian Lance Taylor * Makefile.in (distclean): Remove .gdbinit. Fri Mar 28 15:37:30 1997 Fred Fish * config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define. Fri Mar 28 15:38:04 1997 Mike Meissner * remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type to va_list from void *, since va_list might not be a pointer type. Thu Mar 27 14:21:46 1997 Mark Alexander * remote-mips.c: Clean up comment and extraneous semicolon for mips_monitor_prompt variable. Thu Mar 27 12:46:58 1997 Mark Alexander * remote-mips.c: Add `set monitor-prompt' command. Wed Mar 26 06:47:44 1997 Mark Alexander Fix from Peter Schauer: * mdebugread.c (parse_procedure): Set address of procedure to block start; this fixes problems with shared libraries introduced by change of Mar 21. Mon Mar 24 19:43:16 1997 Geoffrey Noer * symtab.c (find_pc_symtab): change to support the case where the objfile is reordered and contains both coff and stabs debugging info (continue on if a psymtab isn't found). Sun Mar 23 16:19:20 1997 Mark Alexander Fixes from Peter Schauer: * config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE, REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host, is big-endian and if registers are 32 bits. * mips-tdep.c (mips_print_register, mips_extract_return_value, mips_store_return_value): Fix floating-point word-order problems on little-endian targets introduced by changes of Mar 21. Sun Mar 23 15:43:27 1997 Stan Shebs * remote.c (target_resume_hook, target_wait_loop_hook): New globals. (remote_resume, remote_wait): Use them. * d10v-tdep.c: Set the above hooks. (tracesource): New GDB variable, controls source display in traces. (display_trace): Find and display source line if requested. (trace_info): Mention empty trace buffer if appropriate. (tdisassemble_command): Robustify argument handling. * configure.host: Remove extra bogus Linux case. Sat Mar 22 16:41:35 1997 Fred Fish * remote-sim.c (simulator_command): Add comment about dealing with NULL or empty args. * Makefile.in (tic80-tdep.o): Add target. * configure.tgt: Add tic80 case. * tic80-tdep.c: New file. * config/tic80/{tic80.mt, tm-tic80.h}: New files. Sat Mar 22 02:48:11 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * c-exp.y (yylex): Handle nested template parameter lists. * symtab.c (decode_line_2): Fix test for valid choice number. Fri Mar 21 19:10:05 1997 Mark Alexander * mips-tdep.c (mips_push_arguments): On non-EABI architectures, copy first two floating point arguments to general registers, so that MIPS16 functions will receive the arguments correctly. (mips_print_register): Print double registers correctly on little-endian hosts. (mips_extract_return_value): Return double values correctly on little-endian hosts. * mdebugread.c (parse_procedure): Adjust address of procedure relative to address in file descriptor record; this accounts for constant strings that may precede functions in the text section. Remove now-useless lowest_pdr_addr from argument list and all calls. Fri Mar 21 15:36:25 1997 Michael Meissner * configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine whether the simulator will be built by whether the Makefile in the simulator directory was built. * configure.in (--enable-sim-powerpc): Delete switch. * configure: Regenerate. Thu Mar 20 20:52:04 1997 Jeffrey A Law (law@cygnus.com) * mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1" in the prologue too. * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI compilers. (gdb_os_evprintf_filtered): Similarly. Wed Mar 19 16:13:22 1997 Geoffrey Noer New UnixWare 2.1 configuration * config/i386/i386v42mp.mt: new * config/i386/i386v42mp.mh: new * config/i386/tm-i386v42mp.h: new * config/i386/nm-i386v42mp.h: new * configure.tgt: added new entries * configure.host: added new entries Mon Mar 17 17:52:00 1997 J.T. Conklin * dsrec.c (load_srec): Print leading zeroes when printing section addresses. Mon Mar 17 15:00:16 1997 Andrew Cagney * remote-sim.h: Delete - moved to ../include/remote-sim.h. * Makefile.in (remote_utils_h): Update path to remote-sim.h. Fri Mar 7 20:55:28 1997 Andrew Cagney * remote-sim.c (flush_stdout, write_stderr, flush_stderr, vprintf_filtered, evprintf_filtered): Callbacks that accept varargs. Sat Mar 15 00:50:46 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * breakpoint.c (insert_breakpoints, watchpoint_check, bpstat_stop_status): Do not disable watchpoints going out of scope. (insert_breakpoints): Make sure that the current frame is valid before calling find_frame_addr_in_frame_chain. * top.c (setup_user_args): Handle quotes and backslashes. (print_gdb_version): Update copyright year. Fri Mar 14 15:44:03 1997 Ian Lance Taylor * Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h. Thu Mar 13 22:51:00 1997 Dawn Perchik * utils.c (pollquit, notice_quit): If _WIN32, limit test for cntl-C to wingdb. (initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols except under wingdb. (Contributed by Martin Hunt). Thu Mar 13 12:40:49 1997 Tom Tromey * configure: Regenerated. * configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM. Thu Mar 13 11:00:22 1997 Doug Evans * remote-sim.h (sim_state, SIM_DESC): New types. (sim_open): Return a `descriptor' as result. (*): New argument of descriptor result from sim_open. * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p. (gdbsim_open): Record result of sim_open in gdbsim_desc. Pass argv list to sim_open, argv[0] = pseudo program name. (*): Pass gdbsim_desc to sim_foo fns. Wed Mar 12 14:40:06 1997 Tom Tromey * config.in: Regenerated. * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl, HAVE_HPUX_THREAD_SUPPORT): Define. Tue Mar 11 07:25:27 1997 Mark Alexander First cut at supporting simulators in gdbserver: * configure, configure.in: Allow gdbserver to be configured for cross-target environments. * gdbserver/Makefile.in: Add simulator support. * gdbserver/configure.in: Eliminate assumption that host == target. Simplify using gdb/configure.tgt and gdb/configure.host. Fix other minor configuration errors. * gdbserver/low-sparc.c: Fix compile error. * gdbserver/remote-utils.c: Eliminate assumption that registers and addresses are four bytes. Fix minor compile errors and warnings. * gdbserver/server.c: Rewrite numerous instances of identical code for starting inferior processes to call new function start_inferior. Eliminate assumption that registers and addresses are four bytes. * gdbserver/server.h: Add missing prototypes to eliminate compiler warnings. * gdbserver/low-sim.c: New file to mate gdbserver with simulators. * config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver. * config/i386/linux.mh: Eliminate gdbserver support as a first step in moving such support from host to target makefile fragments. * config/i386/linux.mt: Move gdbserver support here from linux.mh. Mon Mar 10 12:27:47 1997 Michael Snyder * symtab.h (INIT_SAL): New macro to initialize symtab_and_line, to insure consistant initialization of unused fields to zero. * symtab.c: replace initializations of sals with new macro INIT_SAL. * breakpoint.c: ditto. * infrun.c: ditto. * infcmd.c: ditto. * source.c: add call to INIT_SAL macro. Sat Mar 8 00:16:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * sparc-tdep.c (isbranch): Always handle v9 branch instructions, they might get used on 32 bit targets as well. Wed Mar 5 19:34:09 1997 Bob Manson * remote-mips.c (mips_exit_debug): Some IDT boards don't send the full exit string. Wed Mar 5 12:59:27 1997 Jeffrey A Law (law@cygnus.com) * mn10200-tdep.c (mn10200_push_arguments): Handle new calling conventions. (mn10200_store_struct_return): Likewise. Tue Mar 4 10:31:02 1997 Mark Alexander * mips-tdep.c (mips_fetch_instruction): New function; replace common code throughout with calls to it. (mips_find_saved_regs): Examine MIPS16 entry instruction to determine correct saved addresses of $s0 and $s1. (mips_find_saved_regs, mips16_heuristic_proc_desc): Use MIPS_REGSIZE instead of hardcoded 4. (mips16_skip_prologue): Handle extended instructions correctly. Mon Mar 3 12:29:20 1997 Doug Evans * defs.h (LONGEST): Move #ifndef LONGEST to outside. Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG. Thu Feb 27 18:54:11 1997 Mark Alexander * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR): New macros for testing, setting, and clearing bit 0 of addresses. Change numerous bits of code where bit 0 was being manipulated to use these macros. Thu Feb 27 14:12:41 1997 Mark Alexander * remote-mips.c: Put back the form feeds. Thu Feb 27 12:04:24 1997 Mark Alexander * remote-mips.c: Remove form feeds (^L) from source. (mips_initialize): LSI PMON doesn't support 'set regsize' command. (pmon_wait): Don't need to exit and re-enter debug mode on LSI PMON after a continue; it causes target program misbehavior. (mips_fetch_register): Don't fetch unsupported registers; this cuts down on wasted serial traffic. Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com) * configure.in configure (HPUX/OSF thread support): Enable this only when running GCC, since HP's thread header files use ANSI C which is not supported by their default compiler. * configure.host (i[3456]86-*-windows): Disable long long support for WinGDB. Add mswin to configdirs. * configure.in configure: Move calls to configure.host and configure.tgt to the top of configure.in to allow them to set config variables before they are referenced. Tue Feb 25 20:21:52 1997 Stan Shebs * configure.tgt (mips*-*-lnews*): New target. Mon Feb 24 16:35:00 1997 Jeffrey A Law (law@cygnus.com) * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame if we're not the innermost frame. Fix minor typos. Sat Feb 22 03:39:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * stabsread.c (read_type): Fix handling of template names with template parameters containing `::'. * valops.c (search_struct_field, search_struct_method): Pass correct valaddr parameter to baseclass_offset. Prevent gdb crashes by making sure that the virtual base pointer from an user object still points to accessible memory. Tue Feb 18 13:36:34 1997 Mark Alexander * maint.c: Eliminate -Wall warnings by including some header files. Tue Feb 18 13:06:30 1997 Mark Alexander * remote-sim.c (init_callbacks): Undo previous change. Tue Feb 18 11:13:00 1997 Dawn Perchik * maint.c: Fix dereference of pointer. * remote-sim.c: Fix reference of structure member "last_error". * debugify.c: Include config.h to get ANSI definitions. Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com) * remote-vx.c (vx_attach): Remove code added by kung. It made no sense. Fri Feb 14 13:00:07 1997 Ian Lance Taylor * main.c (print_gdb_help): Make static to match declaration. Thu Feb 13 18:18:18 1997 Dawn Perchik * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments. Wed Feb 12 15:58:00 1997 Dawn Perchik * debugify.c, debugify.h: Make safe for non-ansi compilers. Wed Feb 12 15:30:00 1997 Dawn Perchik * defs.h: Fix prototypes for new cleanup functions. Wed Feb 12 15:08:47 1997 Dawn Perchik * debugify.c, debugify.h: Fix for general gnu use. Remove C++ comment, add PARAMS, add license info and fix indentation. Wed Feb 12 14:42:47 1997 Dawn Perchik * debugify.c, debugify.h: New files. Provide common macros for writing debug info to a log file or stdio. Wed Feb 12 02:44:39 1997 Dawn Perchik * c-valprint.c (c_val_print): Fix printing for arrays defined with 0 length. Tue Feb 11 22:24:39 1997 Dawn Perchik * defs.h: Fix cntl-C to read from the Windows message queue. Add prototypes for make_final_cleanup (and the other cleanup routines. * remote-e7000.c: Fix sync code to timeout if unable to sync. Change sync code to report status while trying to sync-up with hardware. Add debugging output and document. * ser-e7kpc.c: Swap order of len & offset to match implementation. Add debugging output and document. * serial.c: Add debugging output. * top.c: Add call to do_final_cleanups. Remove conditionals preventing Win32 from getting SIGQUIT. * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup chain as a parameter. Extract this generic code from the cleanup routines into separate funtions (*_my_cleanup). Keep old functionality by passing "cleanup_chain" to the new funtions. Define the cleanup chain "final_cleanup_chain" to be a cleanup chain which will be executed only when gdb exits. Add functions (*_final_cleanup) to match the original (*_cleanup) functions. (pollquit, quit, notice_quit): Fix to read cntl-C from the Windows message queue. Tue Feb 11 15:36:31 1997 Doug Evans * m32r-rom.c: #include . #ifdef out new load support if wingdb. * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb. Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com) * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix. * mn10200-tdep.c (mn10200_store_struct_return): New function. * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when extracting a return value from a register pair. * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to be two byte aligned. Round argument sizes up to two byte boundary. Write out args in two byte hunks. (mn10200_push_return_address): Implement. * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for structures > 8 bytes (temporary). (STORE_RETURN_VALUE): Likewise. (CALL_DUMMY): No longer undefine. (USE_STRUCT_CONVENTION): Use for args > 8 bytes. (REG_STRUCT_HAS_ADDR): Define. Mon Feb 10 18:35:55 1997 Mark Alexander * mips-tdep.c (non_heuristic_proc_desc): New function. (find_proc_desc): Move non-heuristic proc search code into separate function. (gdb_print_insn_mips): Use non-heuristic method to find procedure descriptor, to avoid prologue examination when disassembling. * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC aka MicroMeteor board). (mips_exit_debug): Prevent protocol reinitialization if an error occurs while exiting debug mode. Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com) * mn10200-tdep.c: Remove lots of debugging printfs, update/improve comments, formatting, etc. Plus other minor fixes for problems I found during my first pass over the mn10200 port. (mn10200_analyze_prologue): New function. (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it. * config/mn10200/tm-mn10200.h: Lots of updates/improvements to comments, formatting, etc. Minor fixes for problems I found during my first pass over the mn10200 port. (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and pointers. (REGISTER_VIRTUAL_TYPE): Define as a long. (EXTRACT_RETURN_VALUE): Rework to deal with long ints living in register pairs. (STORE_RETURN_VALUE): Similarly. * blockframe.c (generic_get_saved_regs): Remove unused variable "addr". * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl inside #ifdef CALL_DUMMY. (watch_command_1): Initialize target_resources_ok. * command.c (do_setshow_command): Provide dummy initialization for "match". * valops.c (find_function_addr): Move function & prototype inside #ifdef CALL_DUMMY. (value_arg_coerce): Similarly. (value_of_variable): Provide dummy initialization of "frame". Mon Feb 10 07:54:26 1997 Fred Fish * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter to prim_record_minimal_symbol_and_info call that was missed in Jan 3 change. (scan_xcoff_symtab): Ditto. Sun Feb 09 09:23:26 1997 Mark Alexander * remote-mips.c (common_breakpoint): Prevent 64-bit addresses from being sent to 32-bit targets by masking off upper bits. * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits of PC on 32-bit targets. (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a frame setup instruction. (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall. (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid prologue instruction. Fix warnings and bugs found by gcc -Wall. * buildsym.c (finish_block): Improve handling of overlapping blocks; fixes problem on MIPS16 printing function arguments. Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dwarf2read.c (dwarf2_linkage_name): New function to get the linkage name of a die from DW_AT_MIPS_linkage_name or DW_AT_name. (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn, new_symbol): Use it instead of accessing DW_AT_name. (read_partial_die): Use DW_AT_MIPS_linkage name as name of the partial die if present. (dwarf2_add_member_fn): Make a copy of physname on the type obstack. Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com) * blockframe.c (generic_frame_chain_valid): If the new frame is not INNER_THAN the old frame, then it's not valid. Tue Feb 04 09:04:37 1997 Mark Alexander * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate. (mips16_heuristic_proc_desc): Recognize jal(x) instruction. Mon Feb 03 17:57:58 1997 Mark Alexander * mips-tdep.c (mips16_decode_reg_save): Distinguish between sd and sw instructions correctly. (heuristic_proc_start): Add support for MIPS16. (mips16_get_imm, mips16_heuristic_proc_desc, mips32_heuristic_proc_desc): New helper functions for heuristic_proc_desc. (heuristic_proc_desc): Rewrite and reorganize to support MIPS16. (mips_push_arguments): Don't align small arguments in EABI. (mips32_skip_prologue): Attempt to shrink code size a little. Mon Feb 3 11:06:05 1997 Michael Snyder * m32r-stub.c: New -- remote protocol support for M32R cpu. * m32r-rom.c: Several experiments with improved download time. Fri Jan 31 08:26:39 1997 Mark Alexander * mips-tdep.c (MIPS16_INSTLEN): Define. (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN. (heuristic_proc_start): Recognize 'entry' pseudo-op as a start of function on MIPS16. (mips32_skip_prologue, mips16_skip_prologue): New helper functions for mips_skip_prologue. (mips_skip_prologue): Recognize both 16- and 32-bit prologues. Wed Jan 29 12:45:54 1997 Michael Meissner * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library ../sim/common/libcommon.a. Tue Jan 28 15:54:13 1997 Michael Snyder * blockframe.c: fix a null pointer ref in generic_get_saved_register Tue Jan 28 15:39:50 1997 Geoffrey Noer * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing working. Mon Jan 27 14:31:52 1997 Mark Alexander First set of changes for mips16: * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT, MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define. (ABOUT_TO_RETURN): Call new function mips_about_to_return. (mips_breakpoint_from_pc, mips_about_to_return): Declare. * mem-break.c (memory_breakpoint_from_pc): New function. (memory_insert_breakpoint, memory_remove_breakpoint): Use memory_breakpoint_from_pc to determine breakpoint contents and size. * target.h (memory_breakpoint_from_pc): Declare. * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc to determine size of breakpoint instruction. * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save): New helper functions for mips_find_saved_regs. (mips_find_saved_regs): Recognize mips16 prologues. (mips_addr_bits_remove): Strip off upper 32 bits of address when target CPU is 32 bits but CORE_ADDR is 64 bits. (mips_step_skips_delay): No branch delay slot on mips16. (gdb_print_insn_mips): Disassemble mips16 code. (mips_breakpoint_from_pc, mips_about_to_return): New functions. Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com) * tm-mn10200.h (NUM_REGS): Decrease to 12. (REGISTER_NAMES): Elimination registers not found on the mn10200. (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes. (LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200. Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dwarf2read.c: Replace integral tag, name and form fields in internal structure definitions with the corresponding enumeration types from dwarf2.h. Add default cases to switches on enumerations where appropriate. Make quoting of string arguments in complaint messages consistent. Check for NULL returns from DW_STRING. (struct partial_die_info): Add sibling and has_type fields, remove unused value field. (DW_*): Move access macro definitions near the definition of the attribute structure. (struct field_info): New structure to pass information about fields and member functions between die processing routines. (dwarf2_build_psymtabs_hard): Set cu_header_offset. (scan_partial_symbols): Do not enter DW_TAG_subprogram dies into the partial symbol table if the DW_AT_*_pc attributes are missing. Add file scope base type definitions to the partial symbol table. Skip over child dies if the die has a sibling attribute. (add_partial_symbol): Enter global variables with type attributes and without location descriptors into the partial symbol table. Store value of DW_TAG_variable dies in the partial symbol table. Do not enter global variables into the minimal symbol table. Add base type definitions to the partial symbol table. (psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc. (process_die): Move check for DW_AT_low_pc to read_func_scope. Add a typedef symbol for base type definitions to the symbol table. Ignore DW_TAG_inlined_subroutine tags for now. (read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds. (read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds to determine pc bounds, ignore dies with invalid bounds. (dwarf2_get_pc_bounds): New routine to extract and validate the DW_AT_*_pc attributes of a die. (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name, dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type): New functions to handle fields and member functions. (read_structure_scope): Rewritten to use them. (read_array_type): Renamed from dwarf_read_array_type. Default upper array bound to describe an array with unspecified length. Create array types in backwards order, as dwarf2 puts out the array dimensions from left to right. (read_subroutine_type): Handle DW_TAG_unspecified_parameters, DW_AT_artificial and DW_AT_prototyped. (read_base_type): Make an unsigned type for DW_ATE_boolean. Pass objfile to dwarf_base_type. (read_partial_die): Use read_attribute to read in the attributes. Handle DW_AT_sibling and DW_AT_type. Follow references when determining DW_AT_name and DW_AT_external attributes of the die. Validate DW_AT_*_pc attributes. (read_full_die): Use read_attribute to read in the attributes. (read_attribute): New function to read an attribute described by an abbreviated attribute. (new_symbol): Relocate symbol value for DW_TAG_label with baseaddr. Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram, SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block. Change symbol class for global variables with a zero valued location descriptor to LOC_UNRESOLVED. Handle DW_AT_const_value attributes for DW_TAG_variable, DW_TAG_formal_parameter and DW_TAG_enumerator. Build a typedef symbol for DW_TAG_base_type. (dwarf2_const_value): New routine to copy a constant value from an attribute to a symbol. (dwarf_base_type): Use passed in objfile, not current_objfile when calling dwarf2_fundamental_type. (dump_die): Use DW_* accessor macros to access values of attributes. (decode_locdesc): Handle DW_OP_plus_uconst. Wed Jan 22 01:31:16 1997 Geoffrey Noer * mn10200-tdep.c: New file. * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32, SP_REGNUM and FP_REGNUM are different, also no lar or lir. * config/mn10200/mn10200.mt: New file. * configure.tgt: add mn10200 entry. Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com) * configure.in configure: Check if host has libdl if doing Solaris threads. Tue Jan 21 17:03:26 1997 Geoffrey Noer * mn10300-tdep.c: Wrote/fixed implementations of mn10300_frame_chain, mn10300_init_extra_frame_info, mn10300_frame_saved_pc * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC macros. Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com) * configure.in configure: Check if host has libm. Make sure we are using gcc when using the -export-dynamic option. Fixes a problem with building under Solaris/SunPro cc. Mon Jan 20 13:52:13 1997 Mark Alexander * config/mips/{embed,embed64,embedl,embedl64}.mt: Link in simulator on MIPS embedded targets. Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * blockframe.c (frameless_look_for_prologue): Mark frames with a zero PC as frameless to improve backtraces from core dumps caused by dereferencing a NULL function pointer. Thu Jan 16 14:10:41 1997 Geoffrey Noer * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition. Tue Jan 14 16:01:06 1997 Geoffrey Noer * mn10300-tdep.c: made a lot more generic, ripping out code from copied target (no more mn10300_scan_prologue, init_extra_frame_info, and mn10300_fix_call_dummy calls) * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC macros Thu Jan 9 11:44:40 1997 Michael Snyder * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use FP_REGISTER_BYTES to compute offsets into the saved frame, since it fails for SPARC targets configured without any FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE. Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com) * symtab.c (fixup_symbol_section): Handle NULL symbols without crashing. Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com) * Makefile.in configure configure.in: Remove ENABLE_CLIBS, ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS and CONFIG_OBS. * configure configure.in: Clean up test cases around thread support. * configure.tgt (v850-*-*): Include v850ice.o and v850.lib if host is Windows. * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c printcmd.c valops.c value.h values.c: Add bfd_section arg to value_at and value_at_lazy. * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h: Add bfd_section arg to prim_record_minimal_symbol_and_info. * corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section instead of read_memory. It takes a bfd_section arg. * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove unnecessary cast for assignment of struct dbx_symfile_info. Struct objfile now uses a real pointer instead of PTR for this element. * dbxread.c (dbx_symfile_init): Stash bfd section pointers for text, data and bss into dbx_symfile_info. * exec.c (xfer_memory): Handle transfers for user-specified sections. * findvar.c (read_var_value locate_var_value): Copy bfd section from the symbol to the value. * gdb-stabs.h: Add section pointers for text, data and bss sections. * maint.c (translate address command): Add test code for overlay address translation. * printcmd.c (do_examine do_one_display): Now takes a bfd section arg. * (print_formatted x_command): Record current section along with current address for repeated commands. * sparc-nat.c (fetch_inferior_registers): Change target_xfer_memory to target_{read write}_memory to allow changes to target_xfer_memory interface for section info. * symmisc.c (dump_msymbols print_symbol): Print section assocaited with symbol. * symtab.c (fixup_symbol_section): New routine to add section info to symbols returned by lookup_symbol. * symtab.h (struct general_symbol_info): Add bfd section to symbols. * target.c target.h (target_xfer_memory): Add bfd section to args. * (target_read_memory_section): New routine to read data from a specific section. * (target_memory_bfd_section): New global variable to pass bfd section in to targets. * valarith.c (value_add value_addr value_array): Preserve bfd section when computing new value. * value.h (struct value): Add bfd section to values. * values.c (allocate_value value_copy): Initialize/preserve bfd section. * (unpack_double): Clean up _MSC_VER conditionals to remove duplicate code. * v850ice.c: New module to support communication with NEC's PC-based ICE. * config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and ep names with rxx names. sp and fp are renamed via a different mechanism. Fri Jan 3 14:20:05 1997 Geoffrey Noer * mn10300-tdep.c (mn10300_push_arguments): rewrote, also removed code elsewhere that made use of RP_REGNUM. * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300 arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE. For older changes see ChangeLog-1996 Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: