#
# Makefile for tcl debugger
#
VERSION = \"@DBG_VERSION_FULL@\"
SHORT_VERSION = @DBG_VERSION@
# Compatible with Tcl version 7.5
# Compatible with Tk version 4.1
srcdir = @srcdir@
VPATH = @srcdir@
######################################################################
# The following lines are things you are likely to want to change
######################################################################
# Tcl include files. (If you haven't installed Tcl yet, read the README file).
# This must point to the directory that contains ALL of Tcl's include
# files, not just the public ones.
TCLHDIR = @TCLHDIRDASHI@
# flags to pass to cc
# You should be able to leave this just the way it is. However, here are some
# note if you run into problems:
#
# Avoid -O (optimize) unless you are convinced your optimizer is flawless
# (hint: not a chance). I have heard many reports of -O causing Expect to
# misbehave.
# I encourage you to use -g (debugging). While it is unlikely you will
# encounter an internal error in Expect, should this happen, I may just need
# the -g information and then you will need to recompile Expect. As an aside,
# Expect is not a space or time pig, so this won't affect the performance of
# your Expect scripts.
# Note: On Linux systems which only have dynamic X libraries, the -g prevents
# the linker from using them. So do not use -g on such systems.
CFLAGS = @DBG_CFLAGS@ @DBG_SHLIB_CFLAGS@
# which C compiler to use
CC = @CC@
# By default, `make install' will install the appropriate files in
# /usr/local/bin, /usr/local/lib, /usr/local/man, etc. You can specify
# an installation prefix other than /usr/local here:
prefix = @prefix@
# You can specify a separate installation prefix for architecture-specific
# files such as binaries and libraries.
exec_prefix = @exec_prefix@
# If you have ranlib but it should be avoided, change this from "ranlib" #
# to something innocuous like "echo". Known systems with this problem:
# older SCO boxes.
UNSHARED_RANLIB = @UNSHARED_RANLIB@
######################################################################
# End of things you are likely to want to change
######################################################################
libdir = $(exec_prefix)/lib
datadir = $(prefix)/lib
mandir = @mandir@
man1dir = $(mandir)/man1
includedir = $(prefix)/include
# Where to store utility scripts. This corresponds to the variable
# "dbg_library".
DBG_SCRIPTDIR = $(datadir)/dbg
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
AR = ar
ARFLAGS = cr
# TCLHDIR includes "-I"
CPPFLAGS = -I. -I$(srcdir) $(TCLHDIR) \
-DDBG_VERSION=$(VERSION) \
-DDBG_SCRIPTDIR=\"$(DBG_SCRIPTDIR)\"
CFLAGS_INT = $(MH_CFLAGS) $(CPPFLAGS) $(CFLAGS)
.c.o:
$(CC) -c $(CFLAGS_INT) $(HDEFS) $<
CFILES = Dbg.c Dbg_cmd.c
OFILES = Dbg.o Dbg_cmd.o
# libraries (both .a and shared)
DBG_LIB_FILES = @DBG_LIB_FILES@
# default Dbg library (shared if possible, otherwise static)
DBG_LIB_FILE = @DBG_LIB_FILE@
# Dbg object library (.a)
DBG_UNSHARED_LIB_FILE = @DBG_UNSHARED_LIB_FILE@
# Dbg object library (shared, if possible)
DBG_SHARED_LIB_FILE = @DBG_SHARED_LIB_FILE@
all: $(DBG_LIB_FILES)
$(DBG_UNSHARED_LIB_FILE): $(OFILES)
-rm -f $(DBG_UNSHARED_LIB_FILE)
$(AR) $(ARFLAGS) $(DBG_UNSHARED_LIB_FILE) $(OFILES)
-$(UNSHARED_RANLIB) $(DBG_UNSHARED_LIB_FILE)
$(DBG_SHARED_LIB_FILE): $(OFILES)
-rm -f $(DBG_SHARED_LIB_FILE)
@TCL_SHLIB_LD@ -o $(DBG_SHARED_LIB_FILE) $(OFILES)
# Delete all the installed files that the `install' target creates
# (but not the noninstalled files such as `make all' creates)
uninstall:
-rm -f $(man1dir)/tcldbg.1 \
$(libdir)/$(DBG_SHARED_LIB_FILE) \
$(libdir)/$(DBG_UNSHARED_LIB_FILE) \
$(includedir)/Dbg.h \
$(DBG_SCRIPTDIR)/pkgIndex.tcl
install: $(DBG_LIB_FILES)
${srcdir}/mkinstalldirs $(man1dir) $(libdir) $(includedir) $(DBG_SCRIPTDIR)
$(INSTALL_DATA) $(srcdir)/tcldbg.man $(man1dir)/tcldbg.1
if [ -s $(DBG_UNSHARED_LIB_FILE) ] ; then \
$(INSTALL_DATA) $(DBG_UNSHARED_LIB_FILE) $(libdir)/$(DBG_UNSHARED_LIB_FILE) ; \
$(UNSHARED_RANLIB) $(libdir)/$(DBG_UNSHARED_LIB_FILE) ; \
fi
if [ -s $(DBG_SHARED_LIB_FILE) ] ; then \
$(INSTALL_DATA) $(DBG_SHARED_LIB_FILE) $(libdir)/$(DBG_SHARED_LIB_FILE) ; \
fi
$(INSTALL_DATA) $(srcdir)/Dbg.h $(includedir)
# create utility-script directory
$(INSTALL_DATA) $(srcdir)/Dbg_lib.tcl $(DBG_SCRIPTDIR)
$(INSTALL_DATA) $(srcdir)/tclIndex $(DBG_SCRIPTDIR)
###################################
# Targets for Makefile and configure
###################################
Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) config.status
@echo "Rebuilding the Makefile..."
$(SHELL) config.status
configure: $(srcdir)/configure.in $(srcdir)/Makefile.in $(srcdir)/aclocal.m4
autoconf configure.in > configure
-@chmod a+x configure
-rm -f config.cache
config.status: $(srcdir)/configure
@echo "Rebuilding config.status..."
$(SHELL) ./config.status --recheck
################################################
# Various "clean" targets follow GNU conventions
################################################
clean:
-rm -f *~ *.o core \
$(DBG_UNSHARED_LIB_FILE) $(DBG_SHARED_LIB_FILE)
# like "clean", but also delete files created by "configure"
distclean: clean
-rm -f Makefile config.status config.cache config.log Dbg_cf.h
# like "clean", but doesn't delete test utilities or massaged scripts
# because most people don't have to worry about them
mostlyclean:
-rm -f *~ *.o core \
$(DBG_UNSHARED_LIB_FILE) $(DBG_SHARED_LIB_FILE)
# delete everything from current directory that can be reconstructed
# except for configure
realclean: distclean
tclIndex: Dbg_lib.tcl
expect -c "auto_mkindex . *.tcl;exit"
LINTFLAGS = -h -q -x
lint:
lint $(LINTFLAGS) $(CPPFLAGS) $(CFILES) $(TCLLINTLIB) | tee debug.lint
##################################
# Targets for development at NIST
##################################
nist:
configure --verbose --prefix=/depot/tcl --exec-prefix=/depot/tcl/arch
# report globals that shouldn't be public but are
bad_globals:
nm $(DBG_UNSHARED_LIB_FILE) | egrep -v " [a-zU] | _Dbg"
# after copying source directory, restablish all links
symlink:
rm -f aclocal.m4
ln -s ../expect/aclocal.m4
######################################
# Targets for pushing out releases
######################################
FTPDIR = /proj/itl/www/div826/subject/expect/tcl-debug
ftp: tcl-debug-$(SHORT_VERSION).tar.Z tcl-debug-$(SHORT_VERSION).tar.gz
cp tcl-debug-$(SHORT_VERSION).tar.Z $(FTPDIR)/tcl-debug.tar.Z
cp tcl-debug-$(SHORT_VERSION).tar.gz $(FTPDIR)/tcl-debug.tar.gz
cp HISTORY $(FTPDIR)
cp README $(FTPDIR)/README.distribution
rm tcl-debug-$(SHORT_VERSION).tar*
ls -l $(FTPDIR)/tcl-debug.tar*
# make an alpha relase and install it on ftp server
alpha: tcl-debug-$(SHORT_VERSION).tar.Z tcl-debug-$(SHORT_VERSION).tar.gz
cp tcl-debug-$(SHORT_VERSION).tar.Z $(FTPDIR)/tcl-debug-alpha.tar.Z
cp tcl-debug-$(SHORT_VERSION).tar.gz $(FTPDIR)/tcl-debug-alpha.tar.gz
rm tcl-debug-$(SHORT_VERSION).tar*
ls -l $(FTPDIR)/tcl-debug-alpha.tar*
tcl-debug-$(SHORT_VERSION).tar:
rm -f ../tcl-debug-$(SHORT_VERSION)
ln -s `pwd` ../tcl-debug-$(SHORT_VERSION)
cd ..;tar cvfh $@ `pubfile tcl-debug-$(SHORT_VERSION)`
mv ../$@ .
tcl-debug-$(SHORT_VERSION).tar.Z: tcl-debug-$(SHORT_VERSION).tar
compress -fc tcl-debug-$(SHORT_VERSION).tar > $@
tcl-debug-$(SHORT_VERSION).tar.gz: tcl-debug-$(SHORT_VERSION).tar
gzip -fc tcl-debug-$(SHORT_VERSION).tar > $@
Dbg.o: $(srcdir)/Dbg.c $(srcdir)/Dbg.h