# This file (iOUtil.test) tests the hookable TclStat(), TclAccess(),
# and Tcl_OpenFileChannel, routines in the file generic/tclIOUtils.c.
# Sourcing this file into Tcl runs the tests and generates output for
# errors. No output means no errors were found.
#
# Copyright (c) 1998 by Scriptics Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: iOUtil.test,v 1.2 2001/09/14 01:43:40 zlaski Exp $
if {[string compare test [info procs test]] == 1} then {source defs}
set unsetScript {
catch {unset testStat1(size)}
catch {unset testStat2(size)}
catch {unset testStat3(size)}
}
test stat-1.1 {TclStat: Check that none of the test procs are there.} {
catch {file stat testStat1%.fil testStat1} err1
catch {file stat testStat2%.fil testStat2} err2
catch {file stat testStat3%.fil testStat3} err3
list $err1 $err2 $err3
} {{couldn't stat "testStat1%.fil": no such file or directory} {couldn't stat "testStat2%.fil": no such file or directory} {couldn't stat "testStat3%.fil": no such file or directory}}
if {[info commands teststatproc] == {}} {
puts "This application hasn't been compiled with the \"teststatproc\""
puts "command, so I can't test Tcl_Stat_* etc."
} else {
test stat-1.2 {TclStatInsertProc: Insert the 3 test TclStat_ procedures.} {
catch {teststatproc insert TclpStat} err1
teststatproc insert TestStatProc1
teststatproc insert TestStatProc2
teststatproc insert TestStatProc3
set err1
} {bad arg "insert": must be TestStatProc1, TestStatProc2, or TestStatProc3}
test stat-1.3 {TclStat: Use "file stat ?" to invoke each procedure.} {
file stat testStat2%.fil testStat2
file stat testStat1%.fil testStat1
file stat testStat3%.fil testStat3
list $testStat2(size) $testStat1(size) $testStat3(size)
} {2345 1234 3456}
eval $unsetScript
test stat-1.4 {TclStatDeleteProc: "TclpStat" function should not be deletedable.} {
catch {teststatproc delete TclpStat} err2
set err2
} {"TclpStat": could not be deleteed}
test stat-1.5 {TclStatDeleteProc: Delete the 2nd TclStat procedure.} {
# Delete the 2nd procedure and test that it longer exists but that
# the others do actually return a result.
teststatproc delete TestStatProc2
file stat testStat1%.fil testStat1
catch {file stat testStat2%.fil testStat2} err3
file stat testStat3%.fil testStat3
list $testStat1(size) $err3 $testStat3(size)
} {1234 {couldn't stat "testStat2%.fil": no such file or directory} 3456}
eval $unsetScript
test stat-1.6 {TclStatDeleteProc: Delete the 1st TclStat procedure.} {
# Next delete the 1st procedure and test that only the 3rd procedure
# is the only one that exists.
teststatproc delete TestStatProc1
catch {file stat testStat1%.fil testStat1} err4
catch {file stat testStat2%.fil testStat2} err5
file stat testStat3%.fil testStat3
list $err4 $err5 $testStat3(size)
} {{couldn't stat "testStat1%.fil": no such file or directory} {couldn't stat "testStat2%.fil": no such file or directory} 3456}
eval $unsetScript
test stat-1.7 {TclStatDeleteProc: Delete the 3rd procedure & verify all are gone.} {
# Finally delete the 3rd procedure and check that none of the
# procedures exist.
teststatproc delete TestStatProc3
catch {file stat testStat1%.fil testStat1} err6
catch {file stat testStat2%.fil testStat2} err7
catch {file stat testStat3%.fil testStat3} err8
list $err6 $err7 $err8
} {{couldn't stat "testStat1%.fil": no such file or directory} {couldn't stat "testStat2%.fil": no such file or directory} {couldn't stat "testStat3%.fil": no such file or directory}}
eval $unsetScript
test stat-1.8 {TclStatDeleteProc: Verify that all procs have been deleted.} {
# Attempt to delete all the Stat procs. again to ensure they no longer
# exist and an error is returned.
catch {teststatproc delete TestStatProc1} err9
catch {teststatproc delete TestStatProc2} err10
catch {teststatproc delete TestStatProc3} err11
list $err9 $err10 $err11
} {{"TestStatProc1": could not be deleteed} {"TestStatProc2": could not be deleteed} {"TestStatProc3": could not be deleteed}}
}
eval $unsetScript
test access-1.1 {TclAccess: Check that none of the test procs are there.} {
catch {file exists testAccess1%.fil} err1
catch {file exists testAccess2%.fil} err2
catch {file exists testAccess3%.fil} err3
list $err1 $err2 $err3
} {0 0 0}
if {[info commands testaccessproc] == {}} {
puts "This application hasn't been compiled with the \"testaccessproc\""
puts "command, so I can't test Tcl_Access_* etc."
} else {
test access-1.2 {TclAccessInsertProc: Insert the 3 test TclAccess_ procedures.} {
catch {testaccessproc insert TclpAccess} err1
testaccessproc insert TestAccessProc1
testaccessproc insert TestAccessProc2
testaccessproc insert TestAccessProc3
set err1
} {bad arg "insert": must be TestAccessProc1, TestAccessProc2, or TestAccessProc3}
test access-1.3 {TclAccess: Use "file access ?" to invoke each procedure.} {
list \
[file exists testAccess2%.fil] \
[file exists testAccess1%.fil] \
[file exists testAccess3%.fil]
} {1 1 1}
test access-1.4 {TclAccessDeleteProc: "TclpAccess" function should not be deletedable.} {
catch {testaccessproc delete TclpAccess} err2
set err2
} {"TclpAccess": could not be deleteed}
test accesst-1.5 {TclAccessDeleteProc: Delete the 2nd TclAccess procedure.} {
# Delete the 2nd procedure and test that it longer exists but that
# the others do actually return a result.
testaccessproc delete TestAccessProc2
set res1 [file exists testAccess1%.fil]
catch {file exists testAccess2%.fil} err3
set res2 [file exists testAccess3%.fil]
list $res1 $err3 $res2
} {1 0 1}
test access-1.6 {TclAccessDeleteProc: Delete the 1st TclAccess procedure.} {
# Next delete the 1st procedure and test that only the 3rd procedure
# is the only one that exists.
testaccessproc delete TestAccessProc1
catch {file exists testAccess1%.fil} err4
catch {file exists testAccess2%.fil} err5
set res3 [file exists testAccess3%.fil]
list $err4 $err5 $res3
} {0 0 1}
test access-1.7 {TclAccessDeleteProc: Delete the 3rd procedure & verify all are gone.} {
# Finally delete the 3rd procedure and check that none of the
# procedures exist.
testaccessproc delete TestAccessProc3
catch {file exists testAccess1%.fil} err6
catch {file exists testAccess2%.fil} err7
catch {file exists testAccess3%.fil} err8
list $err6 $err7 $err8
} {0 0 0}
test access-1.8 {TclAccessDeleteProc: Verify that all procs have been deleted.} {
# Attempt to delete all the Access procs. again to ensure they no longer
# exist and an error is returned.
catch {testaccessproc delete TestAccessProc1} err9
catch {testaccessproc delete TestAccessProc2} err10
catch {testaccessproc delete TestAccessProc3} err11
list $err9 $err10 $err11
} {{"TestAccessProc1": could not be deleteed} {"TestAccessProc2": could not be deleteed} {"TestAccessProc3": could not be deleteed}}
}
test openfilechannel-1.1 {TclOpenFileChannel: Check that none of the test procs are there.} {
catch {file exists __testOpenFileChannel1%__.fil} err1
catch {file exists __testOpenFileChannel2%__.fil} err2
catch {file exists __testOpenFileChannel3%__.fil} err3
catch {file exists __testOpenFileChannel1%__.fil} err4
catch {file exists __testOpenFileChannel2%__.fil} err5
catch {file exists __testOpenFileChannel3%__.fil} err6
list $err1 $err2 $err3 $err4 $err5 $err6
} {0 0 0 0 0 0}
if {[info commands testopenfilechannelproc] == {}} {
puts "This application hasn't been compiled with the \"testopenfilechannelproc\""
puts "command, so I can't test Tcl_OpenFileChannelInsert"
} else {
test openfilechannel-1.2 {TclOpenFileChannelInsertProc: Insert the 3 test TclOpenFileChannel_ procedures.} {
catch {testopenfilechannelproc insert TclpOpenFileChannel} err1
testopenfilechannelproc insert TestOpenFileChannelProc1
testopenfilechannelproc insert TestOpenFileChannelProc2
testopenfilechannelproc insert TestOpenFileChannelProc3
set err1
} {bad arg "insert": must be TestOpenFileChannelProc1, TestOpenFileChannelProc2, or TestOpenFileChannelProc3}
test openfilechannel-1.3 {TclOpenFileChannel: Use "file openfilechannel ?" to invoke each procedure.} {
close [open __testOpenFileChannel1%__.fil w]
close [open __testOpenFileChannel2%__.fil w]
close [open __testOpenFileChannel3%__.fil w]
catch {
close [open testOpenFileChannel1%.fil r]
close [open testOpenFileChannel2%.fil r]
close [open testOpenFileChannel3%.fil r]
} err
file delete __testOpenFileChannel1%__.fil
file delete __testOpenFileChannel2%__.fil
file delete __testOpenFileChannel3%__.fil
set err
} {}
test openfilechannel-1.4 {TclOpenFileChannelDeleteProc: "TclpOpenFileChannel" function should not be deletedable.} {
catch {testopenfilechannelproc delete TclpOpenFileChannel} err2
set err2
} {"TclpOpenFileChannel": could not be deleteed}
test openfilechannelt-1.5 {TclOpenFileChannelDeleteProc: Delete the 2nd TclOpenFileChannel procedure.} {
# Delete the 2nd procedure and test that it longer exists but that
# the others do actually return a result.
testopenfilechannelproc delete TestOpenFileChannelProc2
close [open __testOpenFileChannel1%__.fil w]
close [open __testOpenFileChannel3%__.fil w]
catch {
close [open testOpenFileChannel1%.fil r]
catch {close [open testOpenFileChannel2%.fil r]}
close [open testOpenFileChannel3%.fil r]
} err3
file delete __testOpenFileChannel1%__.fil
file delete __testOpenFileChannel3%__.fil
set err3
} {}
test openfilechannel-1.6 {TclOpenFileChannelDeleteProc: Delete the 1st TclOpenFileChannel procedure.} {
# Next delete the 1st procedure and test that only the 3rd procedure
# is the only one that exists.
testopenfilechannelproc delete TestOpenFileChannelProc1
close [open __testOpenFileChannel3%__.fil w]
catch {
catch {close [open testOpenFileChannel1%.fil r]}
catch {close [open testOpenFileChannel2%.fil r]}
close [open testOpenFileChannel3%.fil r]
} err4
file delete __testOpenFileChannel3%__.fil
set err4
} {}
test openfilechannel-1.7 {TclOpenFileChannelDeleteProc: Delete the 3rd procedure & verify all are gone.} {
# Finally delete the 3rd procedure and check that none of the
# procedures exist.
testopenfilechannelproc delete TestOpenFileChannelProc3
catch {
catch [open testOpenFileChannel1%.fil r]
catch [open testOpenFileChannel2%.fil r]
catch [open testOpenFileChannel3%.fil r]
} err5
set err5
} {1}
test openfilechannel-1.8 {TclOpenFileChannelDeleteProc: Verify that all procs have been deleted.} {
# Attempt to delete all the OpenFileChannel procs. again to ensure they no longer
# exist and an error is returned.
catch {testopenfilechannelproc delete TestOpenFileChannelProc1} err9
catch {testopenfilechannelproc delete TestOpenFileChannelProc2} err10
catch {testopenfilechannelproc delete TestOpenFileChannelProc3} err11
list $err9 $err10 $err11
} {{"TestOpenFileChannelProc1": could not be deleteed} {"TestOpenFileChannelProc2": could not be deleteed} {"TestOpenFileChannelProc3": could not be deleteed}}
}