RADIUS-STAT-MIB.txt [plain text]
RADIUS-STAT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
Counter32, Integer32,
IpAddress, TimeTicks, mib-2 FROM SNMPv2-SMI
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
radiusStatMIB MODULE-IDENTITY
LAST-UPDATED "0001020000Z"
ORGANIZATION "IETF RADIUS Working Group."
CONTACT-INFO
" Sergey Poznyakoff
email: gray@farlep.net"
DESCRIPTION
"The MIB module for entities implementing the statistics
side of the Remote Access Dialin User Service (RADIUS)
authentication protocol."
REVISION "0001020000Z"
DESCRIPTION "Experimental Version"
::= { radiusStatistics 1 }
radiusMIB OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The OID assigned to RADIUS MIB work by the IANA."
::= { mib-2 67 }
radiusStatistics OBJECT IDENTIFIER ::= {radiusMIB 3}
radiusStatIdent OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation identification string for the
RADIUS statistics server software in use on the
system"
::= {radiusStatMIB 1}
radiusStatUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time (in hundredths of a second) since the statistics
was started."
::= {radiusStatMIB 2}
radiusStatConfigReset OBJECT-TYPE
SYNTAX INTEGER { other(1),
reset(2),
initializing(3),
running(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action object to reinitialize any persistent
server state. When set to reset(2), any persistent
server state (such as a process) is reinitialized as if
the server had just been started. This value will
never be returned by a read operation. When read, one of
the following values will be returned:
other(1) - server in some unknown state;
initializing(3) - server (re)initializing;
running(4) - server currently running."
::= {radiusStatMIB 3}
radiusStatTotalLines OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dialup lines registered by the statistics
module"
::= { radiusStatMIB 4}
radiusStatTotalLinesInUse OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number dial-up lines currently in use"
::= { radiusStatMIB 5 }
radiusStatTotalLinesIdle OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number dial-up lines currently idle"
::= { radiusStatMIB 6 }
radiusStatNASTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusStatNASEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the available
Network Access Servers"
::= { radiusStatMIB 7 }
radiusStatNASEntry OBJECT-TYPE
SYNTAX RadiusNASStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a Network
Access Server"
INDEX { NASIndex }
::= { radiusStatNASTable 1 }
RadiusStatNASEntry ::= SEQUENCE {
NASIndex Integer32,
NASAddress IpAddress,
NASID SnmpAdminString,
NASLines Counter32,
NASLinesInUse Counter32,
NASLinesIdle Counter32,
}
NASIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each NAS"
::= { radiusStatNASEntry 1 }
NASAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAS-IP-Address"
::= { radiusStatNASEntry 2 }
NASID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAS-Identifier"
::= { radiusStatNASEntry 3 }
NASLines OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lines served by the NAS"
::= { radiusStatNASEntry 4 }
NASLinesInUse OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lines currently in use on this NAS"
::= { radiusStatNASEntry 5 }
NASLinesIdle OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lines currently idle on this NAS"
::= { radiusStatNASEntry 6 }
radiusStatNASPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusStatNASPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the available ports"
::= { radiusStatMIB 8 }
radiusStatNASPortEntry OBJECT-TYPE
SYNTAX RadiusStatNASPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a port"
INDEX { PortIndex }
::= { radiusStatNASPortTable 1 }
RadiusStatNASPortEntry ::= SEQUENCE {
radiusStatPortIndex Integer32,
radiusStatNASIndex Integer32,
radiusStatPortID Integer32,
radiusStatPortFramedAddress IpAddress,
radiusStatPortTotalLogins Counter32,
radiusStatPortStatus Counter32,
radiusStatPortStatusDate SnmpAdminString,
radiusStatPortUpTime TimeTicks,
radiusStatPortLastLogin SnmpAdminString,
radiusStatPortLastLoginDate SnmpAdminString,
radiusStatPortLastLogoutDate SnmpAdminString,
radiusStatPortIdleTotalTime TimeTicks,
radiusStatPortIdleMaxTime TimeTicks,
radiusStatPortIdleMaxDate SnmpAdminString,
radiusStatPortInUseTotalTime TimeTicks,
radiusStatPortInUseMaxTime TimeTicks,
radiusStatPortInUseMaxDate SnmpAdminString,
}
radiusStatPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number uniquely identifying each port"
::= { radiusStatNASPortEntry 1 }
radiusStatNASIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number uniquely identifying each port"
::= { radiusStatNASPortEntry 2 }
radiusStatPortID OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port-Identifier"
::= { radiusStatNASPortEntry 3 }
radiusStatPortFramedAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port-Identifier"
::= { radiusStatNASPortEntry 4 }
radiusStatPortTotalLogins OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of logins registered so far"
::= { radiusStatNASPortEntry 5 }
radiusStatPortStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
inUse(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the port"
::= { radiusStatNASPortEntry 6 }
radiusStatPortStatusDate OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the last change in port status"
::= { radiusStatNASPortEntry 7 }
radiusStatPortUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time in thousandths of a second since the port changed its
status"
::= { radiusStatNASPortEntry 8 }
radiusStatPortLastLoginName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The username of the last user logged in on that port"
::= { radiusStatNASPortEntry 9 }
radiusStatPortLastLoginDate OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the last login"
::= { radiusStatNASPortEntry 10 }
radiusStatPortLastLogoutDate OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of the last logout"
::= { radiusStatNASPortEntry 11 }
radiusStatPortIdleTotalTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total time the port was idle"
::= { radiusStatNASPortEntry 12 }
radiusStatPortIdleMaxTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum time the port was idle"
::= { radiusStatNASPortEntry 13 }
radiusStatPortIdleMaxDate OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date when the maximum idle time was registered"
::= { radiusStatNASPortEntry 14 }
radiusStatPortInUseTotalTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total time the port was in use"
::= { radiusStatNASPortEntry 15 }
radiusStatPortInUseMaxTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum time the port was in use"
::= { radiusStatNASPortEntry 16 }
radiusStatPortInUseMaxDate OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date when the maximum in use time was registered"
::= { radiusStatNASPortEntry 17 }
END