FreeRADIUS 2.1.12 Fri 30 Sept 2011 16:57:38 CEST, urgency=medium Feature improvements * Updates to dictionary.erx, dictionary.siemens, dictionary.starent, dictionary.starent.vsa1, dictionary.zyxel, added dictionary.symbol * Added support for PCRE from Phil Mayers * Configurable file permission in rlm_linelog * Added "relaxed" option to rlm_attr_filter. This copies attributes if at least one match occurred. * Added documentation on dynamic clients. See raddb/modules/dynamic_clients. * Added support for elliptical curve cryptography. See ecdh_curve in raddb/eap.conf. * Added support for 802.1X MIBs in checkrad * Added support for %{rand:...}, which generates a uniformly distributed number between 0 and the number you specify. * Created "man" pages for all installed commands, and documented options for all commands. Patch from John Dennis. * Allow radsniff to decode encrypted VSAs and CoA packets. Patch from Bjorn Mork. * Always send Message-Authenticator in radtest. Patch from John Dennis. radclient continues to be more flexible. * Updated Oracle schema and queries * Added SecurID module. See src/modules/rlm_securid/README Bug fixes * Fix memory leak in rlm_detail * Fix "failed to insert event" * Allow virtual servers to be reloaded on HUP. It no longer complains about duplicate virtual servers. * Fix %{string:...} expansion * Fix "server closed socket" loop in radmin * Set ownership of control socket when starting up * Always allow root to connect to control socket, even if "uid" is set. They're root. They can already do anything. * Save all attributes in Access-Accept when proxying inner-tunnel EAP-MSCHAPv2 * Fixes for DHCP relaying. * Check certificate validity when using OCSP. * Updated Oracle "configure" script * Fixed typos in dictionary.alvarion * WARNING on potential proxy loop. * Be more aggressive about clearing old requests from the internal queue * Don't open network sockets when using -C FreeRADIUS 2.1.11 Mon 20 Jun 2011 12:57:38 CEST, urgency=medium Feature improvements * Added doc/rfc/rfc6158.txt: RADIUS Design Guidelines. All vendors need to read it and follow its directions. * Microsoft SoH support for PEAP from Phil Mayers. See doc/SoH.txt * Certificate "bootstrap" script now checks for certificate expiry. See comments in raddb/eap.conf, and then "make_cert_command". * Support for dynamic expansion of EAP-GTC challenges. Patch from Alexander Clouter. * OCSP support from Alex Bergmann. See raddb/eap.conf, "ocsp" section. * Updated dictionary.huawei, dictionary.3gpp, dictionary.3gpp3. * Added dictionary.eltex, dictionary.motorola, and dictionary.ukerna. * Experimental redis support from Gabriel Blanchard. See raddb/modules/redis and raddb/modules/rediswho * Add "key" to rlm_fastusers. Closes bug #126. * Added scripts/radtee from original software at http://horde.net/~jwm/software/misc/comparison-tee * Updated radmin "man" page for new commands. * radsniff now prints the hex decoding of the packet (-x -x -x) * mschap module now reloads its configuration on HUP * Added experimental "replicate" module. See raddb/modules/replicate * Policy "foo" can now refer to module "foo". This lets you over-ride the behavior of a module. * Policy "foo.authorize" can now over-ride the behavior of module "foo", "authorize" method. * Produce errors in more situations when the configuration files have invalid syntax. Bug fixes * Ignore pre/post-proxy sections if proxying is disabled * Add configure checks for pcap_fopen*. * Fix call to otp_write in rlm_otp * Fix issue with Access-Challenge checking from 2.1.10, when the debug flag was set after server startup. Closes #116 and #117. * Fix typo in zombie period start time. * Fix leak in src/main/valuepair.c. Patch from James Ballantine. * Allow radtest to use spaces in shared secret. Patch from Cedric Carree. * Remove extra calls to HMAC_CTX_init() in rlm_wimax, fixing leak. Patch from James Ballantine. * Remove MN-FA key generation. The NAS does this, not AAA. Patch from Ben Weichman. * Include dictionary.mikrotik by default. Closes bug #121. * Add group membership query to MS-SQL examples. Closes bug #120. * Don't cast NAS-Port to integer in Postgresql queries. Closes bug #112. * Fixes for libtool and autoconf from Sam Hartman. * radsniff should read the dictionaries in more situations. * Use fnmatch to check for detail file reader==writer. Closes bug #128. * Check for short writes (i.e. disk full) in rlm_detail. Closes bug #130. Patches and testing from John Morrissey. * Fix typo in src/lib/token.c. Closes bug #124 * Allow workstation trust accounts to use MS-CHAP. Closes bug #123. * Assigning foo=`/bin/echo hello` now produces a syntax error if it is done outside of an "update" section. * Fix "too many open file descriptors" problem when using "verify client" in eap.conf. * Many fixes to dialup_admin for PHP5, by Stefan Winter. * Allow preprocess module to have "hints = " and "huntgroups =", which allows them to be empty or non-existent. * Renamed "php3" files to "php" in dialup_admin/ * Produce error when sub-TLVs are used in a dictionary. They are supported only in the "master" branch, and not in 2.1.x. * Minor fix in dictionary.redback. Closes bug #138. * Fixed MySQL "NULL" issues in ippool.conf. Closes bug #129. * Fix to Access-Challenge warning from Ken-ichirou Matsuzawa. Closes bug #118. * DHCP fixes to send unicast packets in more situations. * Fix to udpfromto, to enable it to work on IPv6 networks. * Fixes to the Oracle accounting_onoff_query. * When using both IPv4 and IPv6 home servers, ensure that we use the correct local socket for proxying. Closes bug #143. * Suppress messages when thread pool is nearly full, all threads are busy, and we can't create new threads. * IPv6 is now enabled for udpfromto. Closes bug #141 * Make sqlippool query buffer the same size as sql module. Closes bug #139. * Make Coa / Disconnect proxying work again. * Configure scripts for rlm_caching from Nathaniel McCallum * src/lib/dhcp.c and src/include/libradius.h are LGPL, not GPL. * Updated password routines to use time-insensitive comparisons. This prevents timing attacks (though none are known). * Allow sqlite module to do normal SELECT queries. * rlm_wimax now has a configure script * Moved Ascend, USR, and Motorola "illegal" dictionaries to separate files. See share/dictionary for explanations. * Check for duplicate module definitions in the modules{} section, and refuse to start if duplicates are found. * Check for duplicate virtual servers, and refuse to start if duplicates are found. * Don't use udpfromto if source is INADDR_ANY. Closes bug #148. * Check pre-conditions before running radmin "inject file". * Don't over-ride "no match" with "match" for regexes. Closes bug #152. * Make retry and error message configurable in mschap. See raddb/modules/mschap * Allow EAP-MSCHAPv2 to send error message to client. This change allows some clients to prompt the user for a new password. See raddb/eap.conf, mschapv2 section, "send_error". * Load the default virtual server before any others. This matches what users expect, and reduces confusion. * Fix configure checks for udpfromto. Fixes Debian bug #606866 * Definitive fix for bug #35, where the server could crash under certain loads. Changes src/lib/packet.c to use RB trees. * Updated "configure" checks to allow IPv6 udpfromto on Linux. * SQL module now returns NOOP if the accounting start/interim/stop queries don't do anything. * Allow %{outer.control: ... } in string expansions * home_server coa config now matches raddb/proxy.conf * Never send a reply to a DHCP Release. FreeRADIUS 2.1.10 Tue 28 Sep 12:00:00 CEST 2010, urgency=medium Feature improvements * Install the "radcrypt" program. * Enable radclient to send requests containing MS-CHAPv1 Send packets with: MS-CHAP-Password = "password". It will be automatically converted to the correct MS-CHAP attributes. * Added "-t" command-line option to radtest. You can use "-t pap", "-t chap", "-t mschap", or "-t eap-md5". The default is "-t pap" * Make the "inner-tunnel" virtual server listen on 127.0.0.1:18120 This change and the previous one makes PEAP testing much easier. * Added more documentation and examples for the "passwd" module. * Added dictionaries for RFC 5607 and RFC 5904. * Added note in proxy.conf that we recommend setting "require_message_authenticator = yes" for all home servers. * Added example of second "files" configuration, with documentation. This shows how and where to use two instances of a module. * Updated radsniff to have it write pcap files, too. See '-w'. * Print out large WARNING message if we send an Access-Challenge for EAP, and receive no follow-up messages from the client. * Added Cached-Session-Policy for EAP session resumption. See raddb/eap.conf. * Added support for TLS-Cert-* attributes. For details, see raddb/sites-available/default, "post-auth" section. * Added sample raddb/modules/{opendirectory,dynamic_clients} * Updated Cisco and Huawei, HP, Redback, and ERX dictionaries. * Added RFCs 5607, 5904, and 5997. * For EAP-TLS, client certificates can now be validated using an external command. See eap.conf, "validate" subsection of "tls". * Made rlm_pap aware of {nthash} prefix, for compatibility with legacy RADIUS systems. * Add Module-Failure-Message for mschap module (ntlm_auth) * made rlm_sql_sqlite database configurable. Use "filename" in sql{} section. * Added %{tolower: ...string ... }, which returns the lowercase version of the string. Also added %{toupper: ... } for uppercase. Bug fixes * Fix endless loop when there are multiple sub-options for DHCP option 82. * More debug output when sending / receiving DHCP packets. * EAP-MSCHAPv2 should return the MPPE keys when used outside of a TLS tunnel. This is needed for IKE. * Added SSL "no ticket" option to prevent SSL from creating sessions without IDs. We need the IDs, so this option should be set. * Fix proxying of packets from inside a TTLS/PEAP tunnel. Closes bug #25. * Allow IPv6 address attributes to be created from domain names Closes bug #82. * Set the string length to the correct value when parsing double quotes. Closes bug #88. * No longer look users up in /etc/passwd in the default configuration. This can be reverted by enabling "unix" in the "authorize" section. * More #ifdef's to enable building on systems without certain features. * Fixed SQL-Group comparison to register only if the group query is defined. * Fixed SQL-Group comparison to register <instance>-SQL-Group, just like rlm_ldap. This lets you have multiple SQL group checks. * Fix scanning of octal numbers in "unlang". Closes bug #89. * Be less aggressive about freeing "stuck" requests. Closes bug #35. * Fix example in "originate-coa" to refer to the correct packet. * Change default timeout for dynamic clients to 1 hour, not 1 day. * Allow passwd module to map IP addresses, too. * Allow passwd module to be used for CoA packets * Put boot filename into DHCP header when DHCP-Boot-Filename is specified. * raddb/certs/Makefile no longer has certs depend on index.txt and serial. Closes bug #64. * Ignore NULL errorcode in PostgreSQL client. Closes bug #39 * Made Exec-Program and Exec-Program-Wait work in accounting section again. See sites-available/default. * Fix long-standing memory leak in esoteric conditions. Found by Jerry Nichols. * Added "Password-With-Header == userPassword" to raddb/ldap.attrmap This will automatically convert more passwords. * Updated rlm_pap to decode Password-With-Header, if it was base64 encoded, and to treat the contents as potentially binary data. * Fix Novell eDir code to use the right function parameters. Closes bug #86. * Allow spaces to be escaped when executing external programs. Closes bug #93. * Be less restrictive about checking permissions on control socket. If we're root, allow connecting to a non-root socket. * Remove control socket on normal server exit. If the server isn't running, the control socket should not exist. * Use MS-CHAP-User-Name as Name field from EAP-MSCHAPv2 for MS-CHAP calculations. It *MAY* be different (upper / lower case) from the User-Name attribute. Closes bug #17. * If the EAP-TLS methods have problems, more SSL errors are now available in the Module-Failure-Message attribute. * Update Oracle configure scripts. Closes bug #57. * Added text to DESC fields of doc/examples/openldap.schema * Updated more documentation to use "Restructured Text" format. Thanks to James Lockie. * Fixed typos in raddb/sql/mssql/dialup.conf. Closes bug #11. * Return error for potential proxy loops when using "-XC" * Produce better error messages when slow databases block the server. * Added notes on DHCP broadcast packets for FreeBSD. * Fixed crash when parsing some date strings. Closes bug #98 * Improperly formatted Attributes are now printed as "Attr-##". If they are not correct, they should not use the dictionary name. * Fix rlm_digest to be check the format of the Digest attributes, and return "noop" rather than "fail" if they're not right. * Enable "digest" in raddb/sites-available/default. This change enables digest authentication to work "out of the box". * Be less aggressive about marking home servers as zombie. If they are responding to some packets, they are still alive. * Added Packet-Transmit-Counter, to track detail file retransmits. Closes bug #13. * Added configure check for lt_dladvise_init(). If it exists, then using it solves some issues related to libraries loading libraries. * Added indexes to the MySQL IP Pool schema. * Print WARNING message if too many attributes are put into a packet. * Include dhcp test client (not built by default) * Added checks for LDAP constraint violation. Closes bug #18. * Change default raddebug timeout to 60 seconds. * Made error / warning messages more consistent. * Correct back-slash handling in variable expansion. Closes bug #46. You SHOULD check your configuration for backslash expansion! * Fix typo in "configure" script (--enable-libltdl-install) * Use local libltdl in more situations. This helps to avoid compile issues complaining about lt__PROGRAM__LTX_preloaded_symbols. * Fix hang on startup when multiple home servers were defined with "src_ipaddr" field. * Fix 32/64 bit issue in rlm_ldap. Closes bug #105. * If the first "listen" section defines 127.0.0.1, don't use that as a source IP for proxying. It won't work. * When Proxy-To-Realm is set to a non-existent realm, the EAP module should handle the request, rather than expecting it to be proxied. * Fix IPv4 issues with udpfromto. Closes bug #110. * Clean up child processes of raddebug. Closes bugs #108 and #109 * retry OTP if the OTP daemon fails. Closes bug #58. * Multiple calls to ber_printf seem to work better. Closes #106. * Fix "unlang" so that "attribute not found" is treated as a "false" comparison, rather than a syntax error in the configuration. * Fix issue with "Group" attribute. FreeRADIUS 2.1.9 Mon 24 May 8:00:00 CEST 2010, urgency=medium Feature improvements * Add radmin command "stats detail <file>" to see what is going on inside of a detail file reader. * Added documentation for CoA. See raddb/sites-available/coa * Add sub-option support for Option 82. See dictionary.dhcp * Add "server" field to default SQL NAS table, and documented it. Bug fixes * Reset "received ping" counter for Status-Server checks. In some corner cases it was not getting reset. * Handle large VMPS attributes. * Count accounting responses from a home server in SNMP / statistics code. * Set EAP-Session-Resumed = Yes, not "No" when session is resumed. * radmin packet counter statistics are now unsigned, for numbers 2^31..2^32. After that they roll over to zero. * Be more careful about expanding data in PAP and MS-CHAP modules. This prevents login failures when passwords contain '{'. * Clean up zombie children if there were many "exec" modules being run for one packet, all with "wait = no". * re-open log file after HUP. Closes bug #63. * Fix "no response to proxied packet" complaint for Coa / Disconnect packets. It shouldn't ignore replies to packets it sent. * Calculate IPv6 netmasks correctly. Closes bug #69. * Fix SQL module to re-open sockets if they unexpectedly close. * Track scope for IPv6 addresses. This lets us use link-local addresses properly. Closes bug #70. * Updated Makefiles to no longer use the shell for recursing into subdirs. "make -j 2" should now work. * Updated raddb/sql/mysql/ippool.conf to use "= NULL". Closes bug #75. * Updated Makefiles so that "make reconfig" no longer uses the shell for recursing into subdirs, and re-builds all "configure" files. * Used above method to regenerate all configure scripts. Closes bug #34. * Updated SQL module to allow "server" field of "nas" table to be blank: "". This means the same as it being NULL. * Fixed regex realm example. Create Realm attribute with value of realm from User-Name, not from regex. Closes bug #40. * If processing a DHCP Discover returns "fail / reject", ignore the packet rather than sending a NAK. * Allow '%' to be escaped in sqlcounter module. * Fix typo internal hash table. * For PEAP and TTLS, the tunneled reply is added to the reply, rather than integrated via the operators. This allows multiple VSAs to be added, where they would previously be discarded. * Make request number unsigned. This changes nothing other than the debug output when the server receives more than 2^31 packets. * Don't block when reading child output in 'exec wait'. This means that blocked children get killed, instead of blocking the server. * Enabled building without any proxy functionality * radclient now prefers IPv4, to match the default server config. * Print useful error when a realm regex is invalid * relaxed rules for preprocess module "with_cisco_vsa_hack". The attributes can now be integer, ipaddr, etc. (i.e. non-string) * Allow rlm_ldap to build if ldap_set_rebind_proc() has only 2 arguments. * Update configure script for rlm_python to avoid dynamic linking problems on some platforms. * Work-around for bug #35 * Do suid to "user" when running in debug mode as root * Make "allow_core_dumps" work in more situations. * In detail file reader, treat bad records as EOF. This allows it to continue working when the disk is full. * Fix Oracle default accounting queries to work when there are no gigawords attributes. Other databases already had the fix. * Fix rlm_sql to show when it opens and closes sockets. It already says when it cannot connect, so it should say when it can connect. * "chmod -x" for a few C source files. * Pull update spec files, etc. from RedHat into the redhat/ directory. * Allow spaces when parsing integer values. This helps people who put "too much" into an SQL value field. FreeRADIUS 2.1.8 Wed 30 Dec 16:44:50 CEST 2009, urgency=medium Feature improvements * Print more descriptive error message for too many EAP sessions. This gives hints on what to do when "failed to store handler" * Commands received from radmin are now printed on stdout when in debugging mode. * Allow accounting packets to be written to a detail file, even if they were read from a different detail file. * Added OpenSSL license exception (src/LICENSE.openssl) Bug fixes * DHCP sockets can now set the broadcast flag before binding to a socket. You need to set "broadcast = yes" in the DHCP listener. * Be more restrictive on string parsing in the config files * Fix password length in scripts/create-users.pl * Be more flexible about parsing the detail file. This allows it to read files where the attributes have been edited. * Ensure that requests read from the detail file are cleaned up (i.e. don't leak) if they are proxied without a response. * Write the PID file after opening sockets, not before (closes bug #29) * Proxying large numbers of packets no longer gives error "unable to open proxy socket". * Avoid mutex locks in libc after fork * Retry packet from detail file if there was no response. * Allow old-style dictionary formats, where the vendor name is the last field in an ATTRIBUTE definition. * Removed all recursive use of mutexes. Some systems just don't support this. * Allow !* to work as documented. * make templates work (see templates.conf) * Enabled "allow_core_dumps" to work again * Print better errors when reading invalid dictionaries * Sign client certificates with CA, rather than server certs. * Fix potential crash in rlm_passwd when file was closed * Fixed corner cases in conditional dynamic expansion. * Use InnoDB for MySQL IP Pools, to gain transactional support * Apply patch to libltdl for CVE-2009-3736. * Fixed a few issues found by LLVM's static checker * Keep track of "bad authenticators" for accounting packets * Keep track of "dropped packets" for auth/acct packets * Synced the "debian" directory with upstream * Made "unlang" use unsigned 32-bit integers, to match the dictionaries. FreeRADIUS 2.1.7 Mon Sept 14 11:20:00 CEST 2009; , urgency=medium Feature improvements * Full support for CoA and Disconnect packets as per RFC 3576 and RFC 5176. Both receiving and proxying CoA is supported. * Added "src_ipaddr" configuration to "home_server". See proxy.conf for details. * radsniff now accepts -I, to read from a filename instead of a device. * radsniff also prints matching requests and any responses to those requests when '-r' is used. * Added example of attr_filter for Access-Challenge packets * Added support for udpfromto in DHCP code * radmin can now selectively mark modules alive/dead. See "set module state". * Added customizable messages on login success/fail. See msg_goodpass && msg_badpass in log{} section of radiusd.conf * Document "chase_referrals" and "rebind" in raddb/modules/ldap * Preliminary implementation of DHCP relay. * Made thread pool section optional. If it doesn't exist, the server will run single-threaded. * Added sample radrelay.conf for people upgrading from 1.x * Made proxying more stable by failing over, rather than rejecting the first request. See "response_window" in proxy.conf * Allow home_server_pools to exist without realms. * Add dictionary.iea (closes bug #7) * Added support for RFC 5580 * Added experimental sql_freetds module from Gabriel Blanchard. * Updated dictionary.foundry * Added sample configuration for MySQL cluster in raddb/sql/ndb See the README file for explanations. Bug fixes * Fixed corner case where proxied packets could have extra character in User-Password attribute. Fix from Niko Tyni. * Extended size of "attribute" field in SQL to 64. * Fixes to ruby module to be more careful about when it builds. * Updated Perl module "configure" script to check for broken Perl installations. * Fix "status_check = none". It would still send packets in some cases. * Set recursive flag on the proxy mutex, which enables safer cleanup on some platforms. * Copy the EAP username verbatim, rather than escaping it. * Update handling so that robust-proxy-accounting works when all home servers are down for extended periods of time. * Look for DHCP option 53 anywhere in the packet, not just at the start. * Fix processing of proxy fail handler with virtual servers. * DHCP code now prints out correct src/dst IP addresses when sending packets. * Removed requirement for DHCP to have clients * Fixed handling of DHCP packets with message-type buried in the packet * Fixed corner case with negation in unlang. * Minor fixes to default MySQL & PostgreSQL schemas * Suppress MSCHAP complaints in debugging mode. * Fix SQL module for multiple instance, and possible crash on HUP * Fix permissions for radius.log for sites that change user/group, but which don't create the file before starting radiusd. * Fix double counting of packets when proxying * Make %l work * Fix pthread keys in rlm_perl * Log reasons for EAP failure (closes bug #8) * Load home servers and pools that aren't referenced from a realm. * Handle return codes from virtual attributes in "unlang" (e.g. LDAP-Group). This makes "!(expr)" work for them. * Enable VMPS to see contents of virtual server again * Fix WiMAX module to be consistent with examples. (closes bug #10) * Fixed crash with policies dependent on NAS-Port comparisons * Allowed vendor IDs to be be higher than 32767. * Fix crash on startup with certain regexes in "hints" file. * Fix crash in attr_filter module when packets don't exist * Allow detail file reader to be faster when "load_factor = 100" * Add work-around for build failures with errors related to lt__PROGRAM__LTX_preloaded_symbols. libltdl / libtool are horrible. * Made ldap module "rebind" option aware of older, incompatible versions of OpenLDAP. * Check value of Fall-Through in attr_filter module. FreeRADIUS 2.1.6 Mon May 18 10:00:00 CEST 2009; urgency=medium Feature improvements * radclient exits with 0 on successful (accept / ack), and 1 otherwise (no response / reject) * Added support for %{sql:UPDATE ..}, and insert/delete Patch from Arran Cudbard-Bell * Added sample "do not respond" policy. See raddb/policy.conf and raddb/sites-available/do_not_respond * Cleanups to Suse spec file from Norbert Wegener * New VSAs for Juniper from Bjorn Mork * Include more RFC dictionaries in the default install * More documentation for the WiMAX module * Added "chase_referrals" and "rebind" configuration to rlm_ldap. This helps with Active Directory. See raddb/modules/ldap * Don't load pre/post-proxy if proxying is disabled. * Added %{md5:...}, which returns MD5 hash in hex. * Added configurable "retry_interval" and "poll_interval" for "detail" listeners. * Added "delete_mppe_keys" configuration option to rlm_wimax. Apparently some WiMAX clients misbehave when they see those keys. * Added experimental rlm_ruby from http://github.com/Antti/freeradius-server/tree/master * Add Tunnel attributes to ldap.attrmap * Enable virtual servers to be reloaded on HUP. For now, only the "authorize", "authenticate", etc. processing sections are reloaded. Clients and "listen" sections are NOT reloaded. * Updated "radwatch" script to be more robust. See scripts/radwatch * Added certificate compatibility notes in raddb/certs/README, for compatibility with different operating systems. (i.e. Windows) Bug fixes * Minor changes to allow building without VQP. * Minor fixes from John Center * Fixed raddebug example * Don't crash when deleting attributes via unlang * Be friendlier to very fast clients * Updated the "detail" listener so that it only polls once, and not many times in a row, leaking memory each time... * Update comparison for Packet-Src-IP-Address (etc.) so that the operators other than '==' work. * Did autoconf magic to work around weird libtool bug * Make rlm_perl keep tags for tagged attributes in more situations * Update UID checking for radmin * Added "include_length" field for TTLS. It's needed for RFC compliance, but not (apparently) for interoperability. FreeRADIUS 2.1.5 Sun Jan 1 1:1:00 CEST 2009; , urgency=medium * Release number skipped due to procedural issues. FreeRADIUS 2.1.4 Tue Mar 10 17:05:00 CEST 2009; , urgency=medium Feature improvements * Permit multiple "-e" in radmin. * Add support for originating CoA-Request and Disconnect-Request. See raddb/sites-available/originate-coa. * Added "lifetime" and "max_queries" to raddb/sql.conf. This helps address the problem of hung SQL sockets. * Allow packets to be injected via radmin. See "inject help" in radmin. * Answer VMPS reconfirmation request. Patch from Hermann Lauer. * Sample logrotate script in scripts/logrotate.freeradius * Add configurable poll interval for "detail" listeners * New "raddebug" command. This prints debugging information from a running server. See "man raddebug. * Add "require_message_authenticator" configuration to home_server configuration. This makes the server add Message-Authenticator to all outgoing Access-Request packets. * Added smsotp module, as contributed by Siemens. * Enabled the administration socket in the default install. See raddb/sites-available/control-socket, and "man radmin" * Handle duplicate clients, such as with replicated or load-balanced SQL servers and "readclients = yes" Bug fixes * Clean up control sockets when they are closed, so that we don't leak memory. * Define SUN_LEN for systems that don't have it. * Correct some boundary conditions in the conditional checker ("if") in "unlang". Bug noted by Arran Cudbard-Bell. * Work around minor building issues in gmake. This should only have affected developers. * Change how we manage unprivileged user/group, so that we do not create control sockets owned by root. * Fixed more minor issues found by Coverity. * Allow raddb/certs/bootstrap to run when there is no "make" command installed. * In radiusd.conf, run_dir depends on the name of the program, and isn't hard-coded to "..../radiusd" * Check for EOF in more places in the "detail" file reader. * Added Freeswitch dictionary. * Chop ethernet frames in VMPS, rather than droppping packets. * Fix EAP-TLS bug. Patch from Arnaud Ebalard * Don't lose string for regex-compares in the "users" file. * Expose more functions in rlm_sql to rlm_sqlippool, which helps on systems where RTLD_GLOBAL is off. * Fix typos in MySQL schemas for ippools. * Remove macro that was causing build issues on some platforms. * Fixed issues with dead home servers. Bug noted by Chris Moules. * Fixed "access after free" with some dynamic clients. FreeRADIUS 2.1.3 Fri Dec 5 17:40:00 CEST 2008; , urgency=medium Feature improvements * Allow running with "user=radiusd" and binding to secure sockets. * Start sending Status-Server "are you alive" messages earlier, which helps with proxying multiple realms to a home server. * Removed thread pool code from rlm_perl. It's not necessary. * Added example Perl configuration to raddb/modules/perl * Force OpenSSL to support certificates with SHA256. This seems to be necessary for WiMAX certs. Bug fixes * Fix Debian patch to allow it to build. * Fix potential NULL dereference in debugging mode on certain platforms for TTLS and PEAP inner tunnels. * Fix uninitialized memory in handling of vendor definitions * Fix parsing of quoted (but non-string) attributes in the "users" file. * Initialize uknown NAS IP to 255.255.255.255, rather than 0.0.0.0 * use SUN_LEN in control socket, to avoid truncation on some platforms. * Correct internal handling of "debug condition" to prevent it from being over-written. * Check return code of regcomp in "unlang", so that invalid regular expressions are caught rather than mishandled. * Make rlm_sql use <ltdl.h>. Addresses bug #610. * Document list "type = status" better. Closes bug #580. * Set "default days" for certificates, because OpenSSL won't do it. This closes bug #615. * Reference correct list in example raddb/modules/ldap. Closes #596. * Increase default schema size for Acct-Session-Id to 64. Closes #540. * Fix use of temporary files in dialup-admin. Closes #605 and addresses CVE-2008-4474. * Addressed a number of minor issues found by Coverity. * Added DHCP option 150 to the dictionary. Closes #618. FreeRADIUS 2.1.2 Thurs Dec 3 10:47:00 CEST 2008; , urgency=medium Due to packaging issues, 2.1.2 has been pulled from the net. FreeRADIUS 2.1.1 Thu Sep 25 11:03:00 CEST 2008; , urgency=medium Feature improvements * Many more options and features in radmin. See "man radmin" and raddb/sites-available/control-socket * Many more commands available via the control socket. Connect via "radmin", and type "help" for more information. * Added dictionary.networkphysics and dictionary.lancom. * Calculate WiMAX MIP keys, and added sample WiMAX SQL tables. Bug fixes * Fixed bug that made radmin not work * Fixed Suse && Debian package scripts * Fixed issues with dynamic clients * Fixed configure checks for -lreadline * rlm_sqlippool no longer needs to be linked to rlm_sql. * Add statistics for detail file listeners. This closes bug #593. * Fixed printing of some WiMAX attributes. * Fix double free on exit() in rlm_attr_filter * Fixed build issues on Solaris. * Fixed fast session resumption for EAP-TLS FreeRADIUS 2.1.0 Fri Sep 5 13:20:01 CEST 2008; , urgency=medium Feature improvements * Clients may now be defined dynamically, based on IP address. See raddb/sites-available/dynamic-clients. * SNMP support is now available through an experimental Perl script. See scripts/snmp-proxy/README * SNMP statistics are available through Status-Server packets. See raddb/sites-available/status * Added more Microsoft attributes from bug #568. * The "linelog" module has more functionality and flexibility. See raddb/modules/linelog. * The debugging output has been sanitized. It should be much more readable. * Debug logs can now be turned on/off while the server is running, for a user, group, realm, etc. See the "log" section of radiusd.conf. * Added support for WiMAX Forum attributes. The dynamic keys are not yet calculated. See share/dictionary.wimax * Added session resumption for PEAP and TTLS. See raddb/eap.conf, "cache" sub-section. * Added "radmin" command-line tool for administering a running server. See "man radmin" and raddb/sites-available/control-socket. Bug fixes * Double escaping of '\\' in the "users" (and some other) files has been fixed. If you have '\\' in the "users" file, your configuration WILL NEED TO BE CHECKED, AND FIXED! * Parse "security" section in radiusd.conf. This was accidentally deleted in 2.0.5. Closes bug #566. * Bind to interface before IP, which allows DHCP sockets to listen on "*" for multiple interfaces. * Fix handling of giaddr in DHCP responses. * Corrected parsing of status_check in home_server so that it works. * Fix hints so that "Puser" works again. * Removed length restrictions on attribute names in the dictionaries. * Update socket code to avoid C compiler optimizations. FreeRADIUS 2.0.5 ; Date: 2008/06/07 17:17:00 , urgency=medium Feature improvements * Permit SQL authorize_reply_query to be empty. * Allow setting response packet type in Post-Proxy-Type Fail handler. * Added install-chown target to set correct permission and ownership make RADMIN=radmin RGROUP=radius install-chown * Support for LDAP-Group and other dynamic comparison attributes in unlang. Developed from a patch by Jason Alderfer. * Added chroot support. See radiusd.conf for comments. * Allow clients of 0/0. We do not recommend using this, though. * Moved many module configurations into raddb/modules/* Bug fixes * Allow proxying to virtual servers for accounting packets, too. * Added "num fields" function to PostgreSQL client. * Updated proxy fallback mechanism to validate fallback servers, and to process fallback requests in a child thread. * rlm_realm returns "ok" for LOCAL realms, not "noop". * Fixed some DHCP code handling. The examples should now work. FreeRADIUS 2.0.4 ; Date: 2008/04/30 08:56:40 , urgency=medium Feature improvements * Allow "virtual_server" in "realm" and "home_server" sections. See raddb/proxy.conf and raddb/sites-available/virtual.example.com. * Allow "passwd" module to be listed in "accounting" and "post-auth". * Added "fallback" to "home_server_pool" configuration, to handle the case of all home servers being dead. See raddb/proxy.conf. * Added sample text to raddb/sites-available/inner-tunnel which can simplify debugging of inner tunnel configurations. * Added regular expression matching in realm names. See raddb/proxy.conf for examples. * Added simple DHCP server functionality. For comments, see raddb/sites-available/dhcp. * Added file globbing capabilities to detail file reader * Added sample raddb/sites-available/robust-proxy-accounting * Clients in SQL can now refer to a virtual server. Patch from Michael Bretterklieber. * Added some examples of creating RADIUS administrator in SQL, and assigning appropriate access rights. Bug fixes * Install all files in raddb/sites-available * Allow non-threaded builds. * Don't treat '0x' as special for known attributes that are not of type "octets". * Fix log error in rlm_pap. * Remove documentation about non-existent functionality. * Updated warning messages in debug output. * Fix handling of timeouts in rlm_ldap that affected 64-bit systems. This fix was supposed to go into 2.0.3, but did not make it. * Fix event handling in debug mode for failed proxy requests. * Fix memleak in fifos. Closes #537. * Fix memleak on blocked threads. Closes #538. * Perform additional checks on NULL realms. Closes #541. * Fix handling of "clients" in "listen" section. * When detail file cannot process a packet, sleep for longer to let the rest of the server do something. * Add missing table to raddb/sql/mssql/schema.sql. Closes #545. * Updated rlm_sql_postgresql to build with PostgreSQL 7.x. Closes #533. * Fix "postauth" of rlm_ldap to look for LDAP-UserDn in the correct place. * Update rlm_attr_filter for some corner cases. Closes #543. * Fixed memory leak in libfreeradius event handler. * In the SQL Accounting on/off queries, remove the restriction that the session time had to be zero. FreeRADIUS 2.0.3 ; Date: 2008/03/17 09:22:17 , urgency=medium Feature improvements * Updated raddb/certs/ca.cnf with extensions to allow ca.der to be imported as a CA on Symbian and Windows Mobile devices. Closes bug #524 * Enable multiple matches in "hints" via Fall-Through = Yes. Closes bug #477 * Added preliminary SQLite driver, contibuted by Apple. Untested, with no sample configuration. This address bug #470. * Updated logging sub-system so that log messages from libfreeradius can go to the log file, and not stdout. * Added dictionary.rfc5176 * EAP module now checks for instance name, and uses that for authentication. This avoids the need to set Auth-Type when there are multiple instances of the EAP module. * Added Module-Return-Code attribute, which contains the value returned by the previous module (ok/fail/update/etc.) Bug fixes * Corrected typos in rlm_dbm. Closes bugs #521 and #522. * Detail file "listen" sections now work much better. * Don't allow old "log_*" to over-ride new format. Closes bug #525 * Initialize allocated memory in Oracle SQL driver. This fixes occasional crashes on some systems. Closes bug #518 * Call correct function in rlm_protocol_filter. This enables the module to build. Closes bug #512. * Added deprecated flag to build for rlm_krb5. This allows it to run on 64-bit systems. Closes bug #491 * Corrected error message when parsing invalid configurations so it doesn't crash. Closes bug #527 * Fix handling of timeouts in rlm_ldap that affected 64-bit systems. * Handle $INCLUDE's in "instantiate" section. Closes #528. * Format updates to "man" pages from Stephen Gran. FreeRADIUS 2.0.2 ; Date: 2008/02/14 11:13:48 , urgency=medium Feature improvements * Added notes on how to debug the server in radiusd.conf * Moved all "log_*" in radiusd.conf to log{} section. The old configurations are still accepted, though. * Added ca.der target in raddb/certs/Makefile. This is needed for importing CA certs into Windows. * Added ability send raw attributes via "Raw-Attribute = 0x0102..." This is available only debug builds. It can be used to create invalid packets! Use it with care. * Permit "unlang" policies inside of Auth-Type{} sub-sections of the authenticate{} section. This makes some policies easier to implement. * "listen" sections can now have "type = proxy". This lets you control which IP is used for sending proxied requests. * Added note on SSL performance to raddb/certs/README Bug fixes * Fixed reading of "detail" files. * Allow inner EAP tunneled sessions to be proxied. * Corrected MySQL schemas * syslog now works in log{} section. * Corrected typo in raddb/certs/client.cnf * Updated raddb/sites-available/proxy-inner-tunnel to permit authentication to work. * Ignore zero-length attributes in received packets. * Correct memcpy when dealing with unknown attributes. * Corrected debugging messages in attr_rewrite. * Corrected generation of State attribute in EAP. This fixes the "failed to remember handler" issues. * Fall back to DEFAULT realm if no realm was found. Based on a patch from Vincent Magnin. * Updated example raddb/sites-available/proxy-inner-tunnel * Corrected behavior of attr_filter to match documentation. This is NOT backwards compatible with previous versions! See "man rlm_attr_filter" for details. FreeRADIUS 2.0.1 ; Date: 2008/01/22 13:29:37 , urgency=low Feature improvements * "unlang" has been expanded to do less run-time expansion, and to have better handling of typed data. See "man unlang" for documentation and new examples. Bug fixes * The 'acct_unique' module has been updated to understand the deprecated (but still used) Client-IP-Address attribute. * The EAP-MSCHAPv2 module no longer leaks MS-CHAP2-Success in packets. * Fixed crash in rlm_dbm. * Fixed parsing of syslog configuration. FreeRADIUS 2.0.0 ; Date: 2007/11/24 08:33:09 , urgency=low Feature improvements * Debugging mode is much clearer and easier to read. * A new policy language makes many configurations trivial. See "man unlang" for a complete description. * Virtual servers are now supported. This permits clear separation of policies. See raddb/sites-available/README * EAP-TLS (PEAP, EAP-TTLS) and OpenSSL certificates "just work". See raddb/certs/README for details. * Proxying is much more configurable than before. See proxy.conf for documentation on pools, and new config items. * Full support for IPv6. * Much more complete support for the RADIUS SNMP MIBs. * HUP now works. Only some modules are re-loaded, and the server configuation is *not* reloaded. * "check config" option now works. See "man radiusd" * radrelay functionality is now included in the server core. See raddb/sites-available/copy-acct-to-home-server * VMPS support. It is minimal, but functional. * Cleaned up internal API's and names, including library names. Bug fixes * Many.