vi.po   [plain text]


# Vietnamese translation for Flex.
# Copyright © 2008 Free Software Foundation, Inc.
# This file is distributed under the same license as the flex-2.5.34 package.
# Clytie Siddall <clytie@riverland.net.au>, 2005-2008.
# 
msgid ""
msgstr ""
"Project-Id-Version: flex 2.5.34\n"
"Report-Msgid-Bugs-To: flex-devel@lists.sourceforge.net\n"
"POT-Creation-Date: 2008-02-26 16:34-0500\n"
"PO-Revision-Date: 2008-02-10 17:40+1030\n"
"Last-Translator: Clytie Siddall <clytie@riverland.net.au>\n"
"Language-Team: Vietnamese <vi-VN@googlegroups.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0\n"
"X-Generator: LocFactoryEditor 1.7b3\n"

#: dfa.c:61
#, c-format
msgid "State #%d is non-accepting -\n"
msgstr "Tình trạng #%d không phải là kiểu chấp nhận -\n"

#: dfa.c:124
msgid "dangerous trailing context"
msgstr "ngữ cảnh theo sau là nguy hiểm"

#: dfa.c:166
#, c-format
msgid " associated rule line numbers:"
msgstr " số thứ tự dòng quy tắc tương ứng:"

#: dfa.c:202
#, c-format
msgid " out-transitions: "
msgstr " việc chuyển tiếp xuất: "

#: dfa.c:210
#, c-format
msgid ""
"\n"
" jam-transitions: EOF "
msgstr ""
"\n"
" chuyển tiếp jam (bị trở ngại?): gặp kết thúc tập tin"

#: dfa.c:341
msgid "consistency check failed in epsclosure()"
msgstr "việc kiểm tra sự thống nhất bị lỗi trong epsclosure()"

#: dfa.c:429
msgid ""
"\n"
"\n"
"DFA Dump:\n"
"\n"
msgstr ""
"\n"
"\n"
"Đổ DFA:\n"
"\n"

#: dfa.c:604
msgid "could not create unique end-of-buffer state"
msgstr "không thể tạo tình trạng kết thúc bộ đệm duy nhất"

#: dfa.c:625
#, c-format
msgid "state # %d:\n"
msgstr "tình trạng # %d:\n"

#: dfa.c:785
msgid "Could not write yynxt_tbl[][]"
msgstr "Không thể ghi « yynxt_tbl[][] »"

#: dfa.c:1052
msgid "bad transition character detected in sympartition()"
msgstr "phát hiện ký tự chuyển tiếp sai trong sympartition()"

#: gen.c:478
msgid ""
"\n"
"\n"
"Equivalence Classes:\n"
"\n"
msgstr ""
"\n"
"\n"
"Hạng độ tương đương:\n"
"\n"

#: gen.c:662 gen.c:691 gen.c:1215
#, c-format
msgid "state # %d accepts: [%d]\n"
msgstr "tình trạng # %d chấp nhận: [%d]\n"

#: gen.c:1110
#, c-format
msgid "state # %d accepts: "
msgstr "tình trạng # %d chấp nhận: "

#: gen.c:1157
msgid "Could not write yyacclist_tbl"
msgstr "Không thể ghi « yyacclist_tbl »"

#: gen.c:1233
msgid "Could not write yyacc_tbl"
msgstr "Không thể ghi « yyacc_tbl »"

#: gen.c:1248 gen.c:1633 gen.c:1656
msgid "Could not write ecstbl"
msgstr "Không thể ghi « ecstbl »"

#: gen.c:1271
msgid ""
"\n"
"\n"
"Meta-Equivalence Classes:\n"
msgstr ""
"\n"
"\n"
"Hạng siêu tương đương:\n"

#: gen.c:1293
msgid "Could not write yymeta_tbl"
msgstr "Không thể ghi « yymeta_tbl »"

#: gen.c:1354
msgid "Could not write yybase_tbl"
msgstr "Không thể ghi « yybase_tbl »"

#: gen.c:1388
msgid "Could not write yydef_tbl"
msgstr "Không thể ghi « yydef_tbl »"

#: gen.c:1428
msgid "Could not write yynxt_tbl"
msgstr "Không thể ghi « yynxt_tbl »"

#: gen.c:1464
msgid "Could not write yychk_tbl"
msgstr "Không thể ghi « yychk_tbl »"

#: gen.c:1618 gen.c:1647
msgid "Could not write ftbl"
msgstr "Không thể ghi « ftbl »"

#: gen.c:1624
msgid "Could not write ssltbl"
msgstr "Không thể ghi « ssltbl »"

#: gen.c:1675
msgid "Could not write eoltbl"
msgstr "Không thể ghi « eoltbl »"

#: gen.c:1735
msgid "Could not write yynultrans_tbl"
msgstr "Không thể ghi « yynultrans_tbl »"

#: main.c:189
msgid "rule cannot be matched"
msgstr "quy tắc không thể được khớp"

#: main.c:194
msgid "-s option given but default rule can be matched"
msgstr "đưa ra tùy chọn « -s » còn quy tắc mặc định có thể được khớp"

#: main.c:234
msgid "Can't use -+ with -l option"
msgstr "Không thể dùng ký tư « -+ » với tùy chọn « -l »"

#: main.c:237
msgid "Can't use -f or -F with -l option"
msgstr "Không thể dùng cờ « -f » hoặc « -F » với tùy chọn « -l »"

#: main.c:241
msgid "Can't use --reentrant or --bison-bridge with -l option"
msgstr ""
"Không thể dùng đối số « --reentrant » (điều vào lại) hoặc « --bison-bridge "
"» (chiếc cầu bison) với tùy chọn « -l »"

#: main.c:278
msgid "-Cf/-CF and -Cm don't make sense together"
msgstr "Hai tùy chọn « -Cf/-CF » và « -Cm » với nhau thì không có ý nghĩa"

#: main.c:281
msgid "-Cf/-CF and -I are incompatible"
msgstr "Hai tùy chọn « -Cf/-CF » và « -I » không tương thích với nhau"

#: main.c:285
msgid "-Cf/-CF are incompatible with lex-compatibility mode"
msgstr ""
"Tùy chọn « -Cf/-CF » không tương thích với chế độ « lex-compatibility "
"» (tương thích với lex)"

#: main.c:290
msgid "-Cf and -CF are mutually exclusive"
msgstr "Hai tùy chọn « -Cf » and « -CF » loại từ lẫn nhau"

#: main.c:294
msgid "Can't use -+ with -CF option"
msgstr "Không thể dùng ký tự « -+ » với tùy chọn « -CF »"

#: main.c:297
#, c-format
msgid "%array incompatible with -+ option"
msgstr "« %array » (mảng) không tương thích với tùy chọn « -+ »"

#: main.c:302
msgid "Options -+ and --reentrant are mutually exclusive."
msgstr ""
"Hai tùy chọn « - + » và « --reentrant » (điều vào lại) loại từ lẫn nhau."

#: main.c:305
msgid "bison bridge not supported for the C++ scanner."
msgstr "bison bridge (chiếc cầu bison) không được hỗ trợ với bộ quét C++."

#: main.c:360 main.c:406
#, c-format
msgid "could not create %s"
msgstr "không thể tạo %s"

#: main.c:419
msgid "could not write tables header"
msgstr "không thể ghi phần đầu bảng"

#: main.c:423
#, c-format
msgid "can't open skeleton file %s"
msgstr "không thể mở tập tin khung sườn %s"

#: main.c:505
#, c-format
msgid "input error reading skeleton file %s"
msgstr "gặp lỗi nhập vào khi đọc tập tin khung sườn %s"

#: main.c:509
#, c-format
msgid "error closing skeleton file %s"
msgstr "gặp lỗi khi đóng tập tin khung sườn %s"

#: main.c:694
#, c-format
msgid "error creating header file %s"
msgstr "gặp lỗi khi tạo tập tin phần đầu %s"

#: main.c:702
#, c-format
msgid "error writing output file %s"
msgstr "gặp lỗi khi ghi tập tin xuất %s"

#: main.c:706
#, c-format
msgid "error closing output file %s"
msgstr "gặp lỗi khi đóng tập tin xuất %s"

#: main.c:710
#, c-format
msgid "error deleting output file %s"
msgstr "gặp lỗi khi xoá bỏ tập tin xuất %s"

#: main.c:717
#, c-format
msgid "No backing up.\n"
msgstr "Không sao lưu.\n"

#: main.c:721
#, c-format
msgid "%d backing up (non-accepting) states.\n"
msgstr "%d đang sao lưu các tình trạng (kiểu không chấp nhận).\n"

#: main.c:725
#, c-format
msgid "Compressed tables always back up.\n"
msgstr "Bảng đã nén lúc nào cũng sao lưu.\n"

#: main.c:728
#, c-format
msgid "error writing backup file %s"
msgstr "găp lỗi khi ghi tập tin sao lưu %s"

#: main.c:732
#, c-format
msgid "error closing backup file %s"
msgstr "gặp lỗi khi đóng tập tin sao lưu %s"

#: main.c:737
#, c-format
msgid "%s version %s usage statistics:\n"
msgstr "%s phiên bản %s thống kê sử dụng:\n"

#: main.c:740
#, c-format
msgid "  scanner options: -"
msgstr "  tùy chọn bộ quét: —"

#: main.c:819
#, c-format
msgid "  %d/%d NFA states\n"
msgstr "  %d/%d tình trạng NFA\n"

#: main.c:821
#, c-format
msgid "  %d/%d DFA states (%d words)\n"
msgstr "  %d/%d tình trạng DFA (%d từ)\n"

#: main.c:823
#, c-format
msgid "  %d rules\n"
msgstr "  %d quy tắc\n"

#: main.c:828
#, c-format
msgid "  No backing up\n"
msgstr "  Không sao lưu\n"

#: main.c:832
#, c-format
msgid "  %d backing-up (non-accepting) states\n"
msgstr "  %d đang sao lưu các tình trạng (kiểu không chấp nhận)\n"

#: main.c:837
#, c-format
msgid "  Compressed tables always back-up\n"
msgstr "  Bảng đã nén lúc nào cũng sao lưu\n"

#: main.c:841
#, c-format
msgid "  Beginning-of-line patterns used\n"
msgstr "  Dùng mẫu kiểu đầu dòng\n"

#: main.c:843
#, c-format
msgid "  %d/%d start conditions\n"
msgstr "  %d/%d điều kiện bắt đầu\n"

#: main.c:847
#, c-format
msgid "  %d epsilon states, %d double epsilon states\n"
msgstr "  %d tình trạng épxilông (ε), %d tình trạng épxilông đôi\n"

#: main.c:851
#, c-format
msgid "  no character classes\n"
msgstr "  không có hạng ký tự\n"

#: main.c:855
#, c-format
msgid "  %d/%d character classes needed %d/%d words of storage, %d reused\n"
msgstr "  %d/%d hạng ky tự cần thiết %d/%d từ sức chứa, %d được dùng lại\n"

#: main.c:860
#, c-format
msgid "  %d state/nextstate pairs created\n"
msgstr "  %d cặp tình trạng/tình trạng kế tiếp đã được tạo\n"

#: main.c:863
#, c-format
msgid "  %d/%d unique/duplicate transitions\n"
msgstr "  %d/%d việc chuyên tiếp duy nhất/trùng\n"

#: main.c:868
#, c-format
msgid "  %d table entries\n"
msgstr "  %d mục nhập bảng\n"

#: main.c:876
#, c-format
msgid "  %d/%d base-def entries created\n"
msgstr "  %d/%d mục nhập base-def (định nghĩa cơ bản) đã được tạo\n"

#: main.c:880
#, c-format
msgid "  %d/%d (peak %d) nxt-chk entries created\n"
msgstr "  %d/%d (tối đa %d) mục nhập nxt-chk (kiểm tra kế tiếp) đã được tạo\n"

#: main.c:884
#, c-format
msgid "  %d/%d (peak %d) template nxt-chk entries created\n"
msgstr ""
"  %d/%d (tối đa %d) mục nhập biểu mẫu nxt-chk (kiểm tra kế tiếp) đã được "
"tạo\n"

#: main.c:888
#, c-format
msgid "  %d empty table entries\n"
msgstr "  %d mục nhập bảng trống\n"

#: main.c:890
#, c-format
msgid "  %d protos created\n"
msgstr "  %d proto (vật đầu tiên) đã được tạo\n"

#: main.c:893
#, c-format
msgid "  %d templates created, %d uses\n"
msgstr "  %d mẫu đã được tạo, %d lần dùng\n"

#: main.c:901
#, c-format
msgid "  %d/%d equivalence classes created\n"
msgstr "  %d/%d hạng kiểu tương đương đã được tạo\n"

#: main.c:909
#, c-format
msgid "  %d/%d meta-equivalence classes created\n"
msgstr "  %d/%d hạng siêu tương đương đã được tạo\n"

#: main.c:915
#, c-format
msgid "  %d (%d saved) hash collisions, %d DFAs equal\n"
msgstr "  %d (%d được lưu) lần va chạm với hash, %d DFA bằng nhau\n"

#: main.c:917
#, c-format
msgid "  %d sets of reallocations needed\n"
msgstr "  cần thiết %d tập hợp điều phân chia lại\n"

#: main.c:919
#, c-format
msgid "  %d total table entries needed\n"
msgstr "  cần thiết tổng mục nhập bảng %d\n"

#: main.c:996
#, c-format
msgid "Internal error. flexopts are malformed.\n"
msgstr "Gặp lỗi nội bộ vì những flexopt dạng sai.\n"

#: main.c:1006
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "Hãy thử lệnh « %s --help » (trợ giúp) để xem thêm thông tin.\n"

#: main.c:1063
#, c-format
msgid "unknown -C option '%c'"
msgstr "không rõ tùy chọn « -C » là « %c »"

#: main.c:1192
#, c-format
msgid "%s %s\n"
msgstr "%s %s\n"

#: main.c:1467
msgid "fatal parse error"
msgstr "gặp lỗi phân tích nghiêm trọng"

#: main.c:1499
#, c-format
msgid "could not create backing-up info file %s"
msgstr "không thể tạo tập tin thông tin sao lưu %s"

#: main.c:1520
#, c-format
msgid "-l AT&T lex compatibility option entails a large performance penalty\n"
msgstr "Tùy chọn kiểu tương thích lex AT&T « -l »  rất giảm hiệu suất\n"

#: main.c:1523
#, c-format
msgid " and may be the actual source of other reported performance penalties\n"
msgstr " thì có lẽ thật gây ra trường hợp giảm hiệu suất khác\n"

#: main.c:1529
#, c-format
msgid ""
"%%option yylineno entails a performance penalty ONLY on rules that can match "
"newline characters\n"
msgstr ""
"%%tùy chọn « yylineno » giảm hiệu suất CHỈ với quy tắc khớp với ký tự dòng "
"mới\n"

#: main.c:1536
#, c-format
msgid "-I (interactive) entails a minor performance penalty\n"
msgstr "Tùy chọn « -I » (tương tác) giảm hiệu suất một ít\n"

#: main.c:1541
#, c-format
msgid "yymore() entails a minor performance penalty\n"
msgstr "yymore() giảm hiệu suất một ít\n"

#: main.c:1547
#, c-format
msgid "REJECT entails a large performance penalty\n"
msgstr "REJECT (đuổi ra) rất giảm hiệu suất\n"

#: main.c:1552
#, c-format
msgid "Variable trailing context rules entail a large performance penalty\n"
msgstr "Quy tắc ngữ cảnh theo sau biến rất giảm hiệu suất\n"

#: main.c:1564
msgid "REJECT cannot be used with -f or -F"
msgstr "Không cho phép dùng REJECT (đuổi ra) với tùy chọn « -f » hay « -F »"

#: main.c:1567
#, c-format
msgid "%option yylineno cannot be used with REJECT"
msgstr ""
"Không cho phép dùng %option (tùy chọn) « yylineno » với REJECT (đuổi ra)"

#: main.c:1570
msgid "variable trailing context rules cannot be used with -f or -F"
msgstr ""
"không cho phép dùng quy tắc ngữ cảnh theo sau biến với tùy chọn « -f » hay « "
"-F »"

#: main.c:1691
#, c-format
msgid "%option yyclass only meaningful for C++ scanners"
msgstr "%option (tùy chọn) « yyclass » chỉ có ý nghĩa với bộ quét C++"

#: main.c:1798
#, c-format
msgid "Usage: %s [OPTIONS] [FILE]...\n"
msgstr "Sử dụng: %s [TUY_CHỌN] [TẬP_TIN]...\n"

#: main.c:1801
#, c-format
msgid ""
"Generates programs that perform pattern-matching on text.\n"
"\n"
"Table Compression:\n"
"  -Ca, --align      trade off larger tables for better memory alignment\n"
"  -Ce, --ecs        construct equivalence classes\n"
"  -Cf               do not compress tables; use -f representation\n"
"  -CF               do not compress tables; use -F representation\n"
"  -Cm, --meta-ecs   construct meta-equivalence classes\n"
"  -Cr, --read       use read() instead of stdio for scanner input\n"
"  -f, --full        generate fast, large scanner. Same as -Cfr\n"
"  -F, --fast        use alternate table representation. Same as -CFr\n"
"  -Cem              default compression (same as --ecs --meta-ecs)\n"
"\n"
"Debugging:\n"
"  -d, --debug             enable debug mode in scanner\n"
"  -b, --backup            write backing-up information to %s\n"
"  -p, --perf-report       write performance report to stderr\n"
"  -s, --nodefault         suppress default rule to ECHO unmatched text\n"
"  -T, --trace             %s should run in trace mode\n"
"  -w, --nowarn            do not generate warnings\n"
"  -v, --verbose           write summary of scanner statistics to stdout\n"
"\n"
"Files:\n"
"  -o, --outfile=FILE      specify output filename\n"
"  -S, --skel=FILE         specify skeleton file\n"
"  -t, --stdout            write scanner on stdout instead of %s\n"
"      --yyclass=NAME      name of C++ class\n"
"      --header-file=FILE   create a C header file in addition to the "
"scanner\n"
"      --tables-file[=FILE] write tables to FILE\n"
"\n"
"Scanner behavior:\n"
"  -7, --7bit              generate 7-bit scanner\n"
"  -8, --8bit              generate 8-bit scanner\n"
"  -B, --batch             generate batch scanner (opposite of -I)\n"
"  -i, --case-insensitive  ignore case in patterns\n"
"  -l, --lex-compat        maximal compatibility with original lex\n"
"  -X, --posix-compat      maximal compatibility with POSIX lex\n"
"  -I, --interactive       generate interactive scanner (opposite of -B)\n"
"      --yylineno          track line count in yylineno\n"
"\n"
"Generated code:\n"
"  -+,  --c++               generate C++ scanner class\n"
"  -Dmacro[=defn]           #define macro defn  (default defn is '1')\n"
"  -L,  --noline            suppress #line directives in scanner\n"
"  -P,  --prefix=STRING     use STRING as prefix instead of \"yy\"\n"
"  -R,  --reentrant         generate a reentrant C scanner\n"
"       --bison-bridge      scanner for bison pure parser.\n"
"       --bison-locations   include yylloc support.\n"
"       --stdinit           initialize yyin/yyout to stdin/stdout\n"
"       --noansi-definitions old-style function definitions\n"
"       --noansi-prototypes  empty parameter list in prototypes\n"
"       --nounistd          do not include <unistd.h>\n"
"       --noFUNCTION        do not generate a particular FUNCTION\n"
"\n"
"Miscellaneous:\n"
"  -c                      do-nothing POSIX option\n"
"  -n                      do-nothing POSIX option\n"
"  -?\n"
"  -h, --help              produce this help message\n"
"  -V, --version           report %s version\n"
msgstr ""
"Tạo ra chương trình thực hiện tiến trình khớp mẫu trong đoạn chữ.\n"
"\n"
"Cách nén bảng:\n"
"  -Ca, --align\t\tthoả hiệp giữa bảng lớn hơn\n"
"\tvà độ _canh lề_ bộ nhớ khá hơn\n"
"  -Ce, --ecs        \tcấu tạo hạng kiểu tương đương\n"
"  -Cf               \tkhông nén bảng; dùng sự tiêu biểu « -f »\n"
"  -CF               \tkhông nén bảng; dùng sự cách tiêu biểu « -F »\n"
"  -Cm, --meta-ecs   cấu tạo hạng kiểu _siêu_ tương đương\n"
"  -Cr, --read       \tdùng chức năng read() (_đọc_) thay thế\n"
"\t\t\t\tthiết bị nhập/xuất chuẩn để nhập bộ quét\n"
"  -f, --full      \ttạo ra bộ quét nhanh và lớn; bằng -Cfr (_đầy đủ_)\n"
"  -F, --fast    \tdùng sự tiêu biểu bảng xen kẽ; bằng -CFr (_nhanh_)\n"
"  -Cem          \tphương pháp nén mặc định;\n"
"\tbằng « --ecs » « --meta-ecs »)\n"
"\n"
"Gỡ lỗi:\n"
"  -d, --debug             \tbật chế độ _gỡ lỗi_ trong bộ quét\n"
"  -b, --backup            \tghi thông tin _sao lưu_ vào %s\n"
"  -p, --perf-report       \tghi _thông báo hiệu suất_ vào thiết bị lỗi "
"chuẩn\n"
"  -s, --nodefault   \tthu hồi quy tắc _mặc định_\n"
"\tđể ECHO (vọng) đoạn chưa khớp\n"
"  -T, --trace             \t%s nên chạy trong chế độ theo _dấu vết_\n"
"  -w, --nowarn            \t_không_ tạo ra lời _cảnh báo_\n"
"  -v, --verbose   \tghi tóm tắt các thống kê bộ quét\n"
"\t\t\t\tvào thiết bị xuất chuẩn (_chi tiêt_)\n"
"\n"
"Tập tin:\n"
"  -o, --outfile=TẬP_TIN      \t\tghi rõ tên _tập tin xuất_\n"
"  -S, --skel=TẬP_TIN         \t\tghi rõ tập tin _khung sườn_\n"
"  -t, --stdout            \t\tghi bộ quet ra _thiết bị xuất chuẩn_\n"
"\tthay thế ra %s\n"
"      --yyclass=TÊN      \t\t\ttên của _hạng_ C++\n"
"      --header-file=TẬP_TIN   tạo _tập tin phần đầu_ C thêm vào bộ quét\n"
"      --tables-file[=TẬP_TIN] \t\tghi các bảng vào TẬP_TIN này\n"
"\n"
"Ứng xử của bộ quét:\n"
"  -7, --7bit              \t\ttạo ra bộ quét kiểu 7-bit\n"
"  -8, --8bit              \t\ttạo ra bộ quét kiểu 8-bit\n"
"  -B, --batch             \ttạo ra bộ quét _bó_ (ngược với tùy chọn « -I »)\n"
"  -i, --case-insensitive\t\t_bỏ qua chữ hoa/thường_ trong mẫu\n"
"  -l, --lex-compat      \t\tđộ _tương thích_ tối đa với lex gốc\n"
"  -X, --posix-compat      \tđộ _tương thích_ tối đa với lex _POSIX_\n"
"  -I, --interactive       \ttạo ra bộ quét _tương tác_\n"
"\t(ngược với tùy chọn « -B »)\n"
"      --yylineno          \t\ttheo dõi số đếm số dòng trong yylineno\n"
"\n"
"Mã đã tạo ra :\n"
"  -+,  --c++               \ttạo ra hang bộ quét kiểu C++\n"
"  -Dmacro[=lời_định_nghĩa]    \t_định nghĩa_ bộ lệnh #define\n"
"\t\t\t\t\t(lời định nghĩa mặc định là « 1 »)\n"
"  -L,  --noline            \tthu hồi các chỉ thị #line trong bộ quét\n"
"\t(_không dòng_)\n"
"  -P,  --prefix=CHUỖI   dùng CHUỖI này là _tiền tố_ thay thế « yy »\n"
"  -R,  --reentrant         \ttạo ra một bộ quét C kiểu _vào lại_\n"
"       --bison-bridge      bộ quét cho trình phân tách thuần tuý kiểu "
"bison.\n"
"\t(_cầu_)\n"
"       --bison-locations   \tgồm khả năng hỗ trợ yylloc (_địa điểm_).\n"
"       --stdinit           \tkhởi động yyin/yyout vào thiết bị nhập/xuất "
"chuẩn\n"
"       --noansi-definitions  \t_lời định nghĩa_ chức năng kiểu cũ\n"
"\t(_không ANSI_)\n"
"       --noansi-prototypes  \tdanh sách tham số trống trong _vật đầu tiên_\n"
"\t\t\t\t\t(_không ANSI_)\n"
"       --nounistd          \t\t_không_ bao gồm <unistd.h>\n"
"       --noCHỨC_NĂNG \t\tkhông tạo ra một CHỨC NĂNG cá biệt\n"
"\n"
"Lặt vặt:\n"
"  -c                      \ttùy chọn POSIX không làm gì\n"
"  -n                      \ttùy chọn POSIX không làm gì\n"
"  -?\n"
"  -h, --help         \thiển thị _trợ giúp_ này\n"
"  -V, --version     \tthông báo phiên bản %s\n"

#: misc.c:100 misc.c:126
#, c-format
msgid "name \"%s\" ridiculously long"
msgstr "tên « %s » là dài nhố nhăng"

#: misc.c:175
msgid "memory allocation failed in allocate_array()"
msgstr "việc phân chia bộ nhớ bị lỗi trong allocate_array() (phân chia mảng)"

#: misc.c:250
#, c-format
msgid "bad character '%s' detected in check_char()"
msgstr "phát hiện ký tự sai « %s » trong check_char() (kiểm tra ký tự)"

#: misc.c:255
#, c-format
msgid "scanner requires -8 flag to use the character %s"
msgstr "bộ quét cần thiết cờ « -8 » để dùng ký tự %s"

#: misc.c:288
msgid "dynamic memory failure in copy_string()"
msgstr "bộ nhớ động đã thất bại trong copy_string() (sao chép chuỗi)"

#: misc.c:422
#, c-format
msgid "%s: fatal internal error, %s\n"
msgstr "%s: gặp lỗi nôi bộ nghiêm trọng, %s\n"

#: misc.c:875
msgid "attempt to increase array size failed"
msgstr "việc thử tăng kích cỡ mảng đã thất bại"

#: misc.c:1002
msgid "bad line in skeleton file"
msgstr "gặp dòng sai trong tập tin khung sườn"

#: misc.c:1051
msgid "memory allocation failed in yy_flex_xmalloc()"
msgstr "việc phân chia bộ nhớ bị lỗi trong yy_flex_xmalloc()"

#: nfa.c:104
#, c-format
msgid ""
"\n"
"\n"
"********** beginning dump of nfa with start state %d\n"
msgstr ""
"\n"
"\n"
"********** bắt đầu đổ NFA có tình trạng bắt đầu là %d\n"

#: nfa.c:115
#, c-format
msgid "state # %4d\t"
msgstr "tình trạng # %4d\t"

#: nfa.c:130
#, c-format
msgid "********** end of dump\n"
msgstr "********** đổ xong\n"

#: nfa.c:174
msgid "empty machine in dupmachine()"
msgstr "máy trống trong dupmachine() (nhân đôi máy)"

#: nfa.c:240
#, c-format
msgid "Variable trailing context rule at line %d\n"
msgstr "Gặp quy tắc ngữ cảnh theo sau biến tại dòng %d\n"

#: nfa.c:353
msgid "bad state type in mark_beginning_as_normal()"
msgstr ""
"kiểu tình trạng sai trong mark_beginning_as_normal() (đánh dấu đầu là thường)"

#: nfa.c:598
#, c-format
msgid "input rules are too complicated (>= %d NFA states)"
msgstr "các quy tắc nhập vào là quá phức tạp (≥ %d tình trạng NFA)"

#: nfa.c:677
msgid "found too many transitions in mkxtion()"
msgstr "gặp quá nhiều việc chuyển tiếp trong mkxtion()"

#: nfa.c:703
#, c-format
msgid "too many rules (> %d)!"
msgstr "quá nhiều quy tắc (> %d) !"

#: parse.y:159
msgid "unknown error processing section 1"
msgstr "gặp lỗi không rõ khi xử lý phần 1"

#: parse.y:184 parse.y:351
msgid "bad start condition list"
msgstr "danh sách điều kiện bắt đầu là sai"

#: parse.y:315
msgid "unrecognized rule"
msgstr "gặp quy tắc không được nhận dạng"

#: parse.y:434 parse.y:447 parse.y:516
msgid "trailing context used twice"
msgstr "ngữ cảnh theo sau được dùng hai lần"

#: parse.y:552 parse.y:562 parse.y:635 parse.y:645
msgid "bad iteration values"
msgstr "gặp giá trị lặp lại sai"

#: parse.y:580 parse.y:598 parse.y:663 parse.y:681
msgid "iteration value must be positive"
msgstr "giá trị lặp lại phải là số dương"

#: parse.y:806 parse.y:816
#, c-format
msgid "the character range [%c-%c] is ambiguous in a case-insensitive scanner"
msgstr "phạm vị ký tự [%c-%c] là mơ hồ trong bộ quét bỏ qua chữ hoa/thường"

#: parse.y:821
msgid "negative range in character class"
msgstr "gặp phạm vị âm trong hạng ký tự"

#: parse.y:918
msgid "[:^lower:] is ambiguous in case insensitive scanner"
msgstr "[:^lower:] là mơ hồ trong bộ quét bỏ qua chữ hoa/thường"

#: parse.y:924
msgid "[:^upper:] ambiguous in case insensitive scanner"
msgstr "[:^upper:] là mơ hồ trong bộ quét bỏ qua chữ hoa/thường"

#: scan.l:75 scan.l:192 scan.l:300 scan.l:443 scan.l:618 scan.l:676
msgid "Input line too long\n"
msgstr "dòng nhập quá dài\n"

#: scan.l:161
#, c-format
msgid "malformed '%top' directive"
msgstr "chỉ thị kiểu « %top » (đầu) dạng sai"

#: scan.l:183
#, no-c-format
msgid "unrecognized '%' directive"
msgstr "gặp chỉ thị kiểu « % » không được nhận dạng"

#: scan.l:284
msgid "Unmatched '{'"
msgstr "Chưa khớp « { »"

#: scan.l:317
msgid "incomplete name definition"
msgstr "lời đinh nghĩa tên chưa hoàn tất"

#: scan.l:451
#, c-format
msgid "unrecognized %%option: %s"
msgstr "gặp tùy chọn %% không được nhận dạng: %s"

#: scan.l:633 scan.l:800
msgid "bad character class"
msgstr "hạng ký tự sai"

#: scan.l:683
#, c-format
msgid "undefined definition {%s}"
msgstr "chưa xác định lời định nghĩa {%s}"

#: scan.l:755
#, c-format
msgid "bad <start condition>: %s"
msgstr "<start condition> (điệu kiện bắt đầu) sai: %s"

#: scan.l:768
msgid "missing quote"
msgstr "thiếu dấu trích dẫn"

#: scan.l:834
#, c-format
msgid "bad character class expression: %s"
msgstr "biểu thức hạng ký tự sai: %s"

#: scan.l:856
msgid "bad character inside {}'s"
msgstr "có ký tự sai ở trong hai dấu ngoặc móc {}"

#: scan.l:862
msgid "missing }"
msgstr "thiếu }"

#: scan.l:940
msgid "EOF encountered inside an action"
msgstr "gặp kết thúc tập tin ở trong một hành động"

#: scan.l:945
msgid "EOF encountered inside pattern"
msgstr "gặp kết thúc tập tin ở trong mẫu"

#: scan.l:967
#, c-format
msgid "bad character: %s"
msgstr "ký tự sai: %s"

#: scan.l:996
#, c-format
msgid "can't open %s"
msgstr "không thể mở %s"

#: scanopt.c:291
#, c-format
msgid "Usage: %s [OPTIONS]...\n"
msgstr "Sử dụng: %s [TÙY_CHỌN]...\n"

#: scanopt.c:565
#, c-format
msgid "option `%s' doesn't allow an argument\n"
msgstr "tùy chọn « %s » không cho phép đối số\n"

#: scanopt.c:570
#, c-format
msgid "option `%s' requires an argument\n"
msgstr "tùy chọn « %s » cần đến đối số\n"

#: scanopt.c:574
#, c-format
msgid "option `%s' is ambiguous\n"
msgstr "tùy chọn « %s » là mơ hồ\n"

#: scanopt.c:578
#, c-format
msgid "Unrecognized option `%s'\n"
msgstr "Không nhận ra tùy chọn « %s »\n"

#: scanopt.c:582
#, c-format
msgid "Unknown error=(%d)\n"
msgstr "Không rõ lỗi=(%d)\n"

#: sym.c:100
msgid "symbol table memory allocation failed"
msgstr "lỗi phân chia bộ nhớ của bảng ký hiệu"

#: sym.c:202
msgid "name defined twice"
msgstr "tên đã được xác định hai lần"

#: sym.c:253
#, c-format
msgid "start condition %s declared twice"
msgstr "điều kiện bắt đầu %s đã được tuyên bố hai lần"

#: yylex.c:56
msgid "premature EOF"
msgstr "gặp kết thúc tập tin quá sớm"

#: yylex.c:198
#, c-format
msgid "End Marker\n"
msgstr "Dấu kết thúc\n"

#: yylex.c:204
#, c-format
msgid "*Something Weird* - tok: %d val: %d\n"
msgstr "• Điều lạ • — hiệu bài: %d giá trị: %d\n"