#if HAVE_CONFIG_H
# include <config.h>
#endif
#include "libgettext.h"
const struct _msg_ent _msg_tbl[] = {
{"", 1},
{"Checking if %s is really the same node as %s\n", 2},
{"Yes, their IP addresses match\n", 3},
{"No, their IP addresses don't match\n", 4},
{"nameserver failure while looking for `%s' during poll of %s.\n", 5},
{"mapped %s to local %s\n", 6},
{"passed through %s matching %s\n", 7},
{"\
analyzing Received line:\n\
%s", 8},
{"line accepted, %s is an alias of the mailserver\n", 9},
{"line rejected, %s is not an alias of the mailserver\n", 10},
{"no Received address found\n", 11},
{"found Received address `%s'\n", 12},
{"message delimiter found while scanning headers\n", 13},
{"no local matches, forwarding to %s\n", 14},
{"forwarding and deletion suppressed due to DNS errors\n", 15},
{"writing RFC822 msgblk.headers\n", 16},
{"no recipient addresses matched declared local names", 17},
{"recipient address %s didn't match any local name\n", 18},
{"message has embedded NULs", 19},
{"SMTP listener rejected local recipient addresses: ", 20},
{"writing message text\n", 21},
{"kerberos error %s\n", 22},
{"krb5_sendauth: %s [server says '%*s'] \n", 23},
{"\t%d msg %d octets long skipped by fetchmail.\n", 24},
{"Kerberos V4 support not linked.\n", 25},
{"Kerberos V5 support not linked.\n", 26},
{"Option --flush is not supported with %s\n", 27},
{"Option --all is not supported with %s\n", 28},
{"Option --limit is not supported with %s\n", 29},
{"timeout after %d seconds waiting to connect to server %s.\n", 30},
{"timeout after %d seconds waiting for server %s.\n", 31},
{"timeout after %d seconds waiting for %s.\n", 32},
{"timeout after %d seconds waiting for listener to respond.\n", 33},
{"timeout after %d seconds.\n", 34},
{"Subject: fetchmail sees repeated timeouts\r\n", 35},
{"\
Fetchmail saw more than %d timouts while attempting to get mail from %s@%s.\n", 36},
{"\
This could mean that your mailserver is stuck, or that your SMTP listener", 37},
{"\
is wedged, or that your mailbox file on the server has been corrupted by", 38},
{"a server error. You can run `fetchmail -v -v' to diagnose the problem.", 39},
{"Fetchmail won't poll this mailbox again until you restart it.", 40},
{"pre-connection command failed with status %d\n", 41},
{"fetchmail: internal inconsistency\n", 42},
{"fetchmail: %s connection to %s failed\n", 43},
{": host is unknown\n", 44},
{": name is valid but has no IP address\n", 45},
{": unrecoverable name server error\n", 46},
{": temporary name server error\n", 47},
{": unknown DNS error %d\n", 48},
{"Lock-busy error on %s@%s\n", 49},
{"Authorization failure on %s@%s\n", 50},
{"Subject: fetchmail authentication failed\r\n", 51},
{"Fetchmail could not get mail from %s@%s.\n", 52},
{"The attempt to get authorization failed.", 53},
{"This probably means your password is invalid.", 54},
{"selecting or re-polling folder %s\n", 55},
{"selecting or re-polling default folder\n", 56},
{"%s at %s (folder %s)\n", 57},
{"%s at %s\n", 58},
{"Polling %s\n", 59},
{"%d %s (%d seen) for %s", 60},
{"messages", 61},
{"message", 62},
{"%d %s for %s", 63},
{" (%d octets).", 64},
{"No mail for %s", 65},
{"Skipping message %d, length -1\n", 66},
{"skipping message %d\n", 67},
{" (oversized, %d octets)\n", 68},
{"reading message %d of %d", 69},
{" (%d %soctets)", 70},
{"header ", 71},
{" (%d body octets) ", 72},
{"message %d was not the expected length (%d actual != %d expected)\n", 73},
{" retained\n", 74},
{" flushed\n", 75},
{" not flushed\n", 76},
{"fetchlimit reached; %d messages left on server\n", 77},
{"socket", 78},
{"authorization", 79},
{"missing or bad RFC822 header", 80},
{"MDA", 81},
{"client/server synchronization", 82},
{"client/server protocol", 83},
{"lock busy on server", 84},
{"SMTP transaction", 85},
{"DNS lookup", 86},
{"undefined\n", 87},
{"%s error while fetching from %s\n", 88},
{"post-connection command failed with status %d\n", 89},
{"%s: can't find your name and home directory!\n", 90},
{"%s: can't determine your host!", 91},
{"gethostbyname failed for %s\n", 92},
{"Unknown system error", 93},
{"%s (log message incomplete)", 94},
{": Error %d", 95},
{"partial error message buffer overflow", 96},
{"%s's SMTP listener does not support ESMTP\n", 97},
{"%s's SMTP listener does not support ETRN\n", 98},
{"Queuing for %s started\n", 99},
{"No messages waiting for %s\n", 100},
{"Pending messages for %s started\n", 101},
{"Unable to queue messages for node %s\n", 102},
{"Node %s not allowed: %s\n", 103},
{"ETRN syntax error\n", 104},
{"ETRN syntax error in parameters\n", 105},
{"Unknown ETRN error %d\n", 106},
{"Option --keep is not supported with ETRN\n", 107},
{"Option --flush is not supported with ETRN\n", 108},
{"Option --remote is not supported with ETRN\n", 109},
{"Option --check is not supported with ETRN\n", 110},
{"fetchmail: thread sleeping for %d sec.\n", 111},
{"This is fetchmail release %s", 112},
{"Taking options from command line", 113},
{" and %s\n", 114},
{"Lockfile at %s\n", 115},
{"No mailservers set up -- perhaps %s is missing?\n", 116},
{"fetchmail: cannot allocate memory for lock name.\n", 117},
{"fetchmail: removing stale lockfile\n", 118},
{"fetchmail: no mailservers have been specified.\n", 119},
{"fetchmail: no other fetchmail is running\n", 120},
{"fetchmail: error killing %s fetchmail at %d; bailing out.\n", 121},
{"background", 122},
{"foreground", 123},
{"fetchmail: %s fetchmail at %d killed.\n", 124},
{"\
fetchmail: can't check mail while another fetchmail to same host is \
running.\n", 125},
{"\
fetchmail: can't poll specified hosts with another fetchmail running at %d.\n", 126},
{"fetchmail: another foreground fetchmail is running at %d.\n", 127},
{"\
fetchmail: can't accept options while a background fetchmail is running.\n", 128},
{"fetchmail: background fetchmail at %d awakened.\n", 129},
{"fetchmail: elder sibling at %d died mysteriously.\n", 130},
{"Enter password for %s@%s: ", 131},
{"starting fetchmail %s daemon \n", 132},
{"poll of %s skipped (failed authentication or too many timeouts)\n", 133},
{"interval not reached, not querying %s\n", 134},
{"saved UID List\n", 135},
{"Query status=%d\n", 136},
{"All connections are wedged. Exiting.\n", 137},
{"fetchmail: sleeping at %s\n", 138},
{"awakened by %s\n", 139},
{"awakened by signal %d\n", 140},
{"awakened at %s\n", 141},
{"normal termination, status %d\n", 142},
{"Warning: multiple mentions of host %s in config file\n", 143},
{"\
fetchmail: warning: no DNS available to check multidrop fetches from %s\n", 144},
{"couldn't find HESIOD pobox for %s\n", 145},
{"couldn't find canonical DNS name of %s\n", 146},
{"%s configuration invalid, port number cannot be negative\n", 147},
{"%s configuration invalid, RPOP requires a privileged port\n", 148},
{"%s configuration invalid, LMTP can't use default SMTP port\n", 149},
{"terminated with signal %d\n", 150},
{"%s querying %s (protocol %s) at %s\n", 151},
{"POP2 support is not configured.\n", 152},
{"POP3 support is not configured.\n", 153},
{"IMAP support is not configured.\n", 154},
{"ETRN support is not configured.\n", 155},
{"Cannot support ETRN without gethostbyname(2).\n", 156},
{"unsupported protocol selected.\n", 157},
{"Poll interval is %d seconds\n", 158},
{"Logfile is %s\n", 159},
{"Idfile is %s\n", 160},
{"Progress messages will be logged via syslog\n", 161},
{"Fetchmail will masquerade and will not generate Received\n", 162},
{"Fetchmail will forward misaddressed multidrop messages to %s.\n", 163},
{"Options for retrieving from %s@%s:\n", 164},
{" Mail will be retrieved via %s\n", 165},
{" Poll of this server will occur every %d intervals.\n", 166},
{" True name of server is %s.\n", 167},
{" This host %s be queried when no host is specified.\n", 168},
{"will not", 169},
{"will", 170},
{" Password will be prompted for.\n", 171},
{" APOP secret = \"%s\".\n", 172},
{" RPOP id = \"%s\".\n", 173},
{" Password = \"%s\".\n", 174},
{" Protocol is KPOP with Kerberos %s authentication", 175},
{" Protocol is %s", 176},
{" (using service %s)", 177},
{" (using network security options %s)", 178},
{" (using port %d)", 179},
{" (using default port)", 180},
{" (forcing UIDL use)", 181},
{" Kerberos V4 preauthentication enabled.\n", 182},
{" Kerberos V5 preauthentication enabled.\n", 183},
{" Server nonresponse timeout is %d seconds", 184},
{" (default).\n", 185},
{" Default mailbox selected.\n", 186},
{" Selected mailboxes are:", 187},
{" %s messages will be retrieved (--all %s).\n", 188},
{"All", 189},
{"Only new", 190},
{" Fetched messages %s be kept on the server (--keep %s).\n", 191},
{" Old messages %s be flushed before message retrieval (--flush %s).\n", 192},
{" Rewrite of server-local addresses is %s (--norewrite %s).\n", 193},
{"enabled", 194},
{"disabled", 195},
{" Carriage-return stripping is %s (stripcr %s).\n", 196},
{" Carriage-return forcing is %s (forcecr %s).\n", 197},
{" Interpretation of Content-Transfer-Encoding is %s (pass8bits %s).\n", 198},
{" MIME decoding is %s (mimedecode %s).\n", 199},
{" Nonempty Status lines will be %s (dropstatus %s)\n", 200},
{"discarded", 201},
{"kept", 202},
{" Message size limit is %d octets (--limit %d).\n", 203},
{" No message size limit (--limit 0).\n", 204},
{" Message size warning interval is %d seconds (--warnings %d).\n", 205},
{" Size warnings on every poll (--warnings 0).\n", 206},
{" Received-message limit is %d (--fetchlimit %d).\n", 207},
{" No received-message limit (--fetchlimit 0).\n", 208},
{" SMTP message batch limit is %d.\n", 209},
{" No SMTP message batch limit (--batchlimit 0).\n", 210},
{" Deletion interval between expunges is %d (--expunge %d).\n", 211},
{" No expunges (--expunge 0).\n", 212},
{" Messages will be appended to %s as BSMTP\n", 213},
{" Messages will be delivered with \"%s\".\n", 214},
{" Messages will be %cMTP-forwarded to:", 215},
{" (default)", 216},
{" Host part of MAIL FROM line will be %s\n", 217},
{" Recognized listener spam block responses are:", 218},
{" Spam-blocking disabled\n", 219},
{" Server connection will be brought up with \"%s\".\n", 220},
{" No pre-connection command.\n", 221},
{" Server connection will be taken down with \"%s\".\n", 222},
{" No post-connection command.\n", 223},
{" No localnames declared for this host.\n", 224},
{" Multi-drop mode: ", 225},
{" Single-drop mode: ", 226},
{"%d local name(s) recognized.\n", 227},
{" DNS lookup for multidrop addresses is %s.\n", 228},
{" Server aliases will be compared with multidrop addresses by ", 229},
{"IP address.\n", 230},
{"name.\n", 231},
{" Envelope-address routing is disabled\n", 232},
{" Envelope header is assumed to be: %s\n", 233},
{"Received", 234},
{" Number of envelope header to be parsed: %d\n", 235},
{" Prefix %s will be removed from user id\n", 236},
{" No prefix stripping\n", 237},
{" Predeclared mailserver aliases:", 238},
{" Local domains:", 239},
{" Connection must be through interface %s.\n", 240},
{" No interface requirement specified.\n", 241},
{" Polling loop will monitor %s.\n", 242},
{" No monitor interface specified.\n", 243},
{" Server connections will be mode via plugin %s (--plugin %s).\n", 244},
{" No plugin command specified.\n", 245},
{" Listener connections will be mode via plugout %s (--plugout %s).\n", 246},
{" No plugout command specified.\n", 247},
{" No UIDs saved from this host.\n", 248},
{" %d UIDs saved.\n", 249},
{" Pass-through properties \"%s\".\n", 250},
{"ERROR: no support for getpassword() routine\n", 251},
{"\
\n\
Caught signal... bailing out.\n", 252},
{"Could not decode initial BASE64 challenge\n", 253},
{"Could not decode OTP challenge\n", 254},
{"Secret pass phrase: ", 255},
{"could not decode initial BASE64 challenge\n", 256},
{"principal %s in ticket does not match -u %s\n", 257},
{"non-null instance (%s) might cause strange behavior\n", 258},
{"could not decode BASE64 ready response\n", 259},
{"challenge mismatch\n", 260},
{"Couldn't get service name for [%s]\n", 261},
{"Using service name [%s]\n", 262},
{"Sending credentials\n", 263},
{"Error exchanging credentials\n", 264},
{"Couldn't unwrap security level data\n", 265},
{"Credential exchange complete\n", 266},
{"Server requires integrity and/or privacy\n", 267},
{"Unwrapped security level flags: %s%s%s\n", 268},
{"Maximum GSS token size is %ld\n", 269},
{"Error creating security level request\n", 270},
{"Requesting authorisation as %s\n", 271},
{"Releasing GSS credentials\n", 272},
{"Error releasing credentials\n", 273},
{"Protocol identified as IMAP4 rev 1\n", 274},
{"Protocol identified as IMAP4 rev 0\n", 275},
{"Protocol identified as IMAP2 or IMAP2BIS\n", 276},
{"OTP authentication is supported\n", 277},
{"GSS authentication is supported\n", 278},
{"Required GSS capability not supported by server\n", 279},
{"KERBEROS_V4 authentication is supported\n", 280},
{"Required KERBEROS_V4 capability not supported by server\n", 281},
{"Required LOGIN capability not supported by server\n", 282},
{"re-poll failed\n", 283},
{"mailbox selection failed\n", 284},
{"missing IP interface address\n", 285},
{"invalid IP interface address\n", 286},
{"invalid IP interface mask\n", 287},
{"activity on %s -noted- as %d\n", 288},
{"skipping poll of %s, %s down\n", 289},
{"skipping poll of %s, %s IP address excluded\n", 290},
{"activity on %s checked as %d\n", 291},
{"skipping poll of %s, %s inactive\n", 292},
{"activity on %s was %d, is %d", 293},
{"warning: found \"%s\" before any host names", 294},
{"%s:%d: warning: found \"%s\" before any host names\n", 295},
{"%s:%d: warning: unknown token \"%s\"\n", 296},
{"String '%s' is not a valid number string.\n", 297},
{"Value of string '%s' is %s than %d.\n", 298},
{"smaller", 299},
{"larger", 300},
{"Invalid protocol `%s' specified.\n", 301},
{"Invalid preauthentication `%s' specified.\n", 302},
{"fetchmail: network security support is disabled\n", 303},
{"usage: fetchmail [options] [server ...]\n", 304},
{" Options are as follows:\n", 305},
{" -?, --help display this option help\n", 306},
{" -V, --version display version info\n", 307},
{" -c, --check check for messages without fetching\n", 308},
{" -s, --silent work silently\n", 309},
{" -v, --verbose work noisily (diagnostic output)\n", 310},
{" -d, --daemon run as a daemon once per n seconds\n", 311},
{" -N, --nodetach don't detach daemon process\n", 312},
{" -q, --quit kill daemon process\n", 313},
{" -L, --logfile specify logfile name\n", 314},
{"\
--syslog use syslog(3) for most messages when running as a \
daemon\n", 315},
{" --invisible don't write Received & enable host spoofing\n", 316},
{" -f, --fetchmailrc specify alternate run control file\n", 317},
{" -i, --idfile specify alternate UIDs file\n", 318},
{" --postmaster specify recipient of last resort\n", 319},
{" -I, --interface interface required specification\n", 320},
{" -M, --monitor monitor interface for activity\n", 321},
{" --plugin specify external command to open connection\n", 322},
{" --plugout specify external command to open smtp connection\n", 323},
{" -p, --protocol specify retrieval protocol (see man page)\n", 324},
{" -U, --uidl force the use of UIDLs (pop3 only)\n", 325},
{" -P, --port TCP/IP service port to connect to\n", 326},
{" -A, --auth authentication type (password or kerberos)\n", 327},
{" -t, --timeout server nonresponse timeout\n", 328},
{" -E, --envelope envelope address header\n", 329},
{" -Q, --qvirtual prefix to remove from local user id\n", 330},
{" -u, --username specify users's login on server\n", 331},
{" -a, --all retrieve old and new messages\n", 332},
{" -K, --nokeep delete new messages after retrieval\n", 333},
{" -k, --keep save new messages after retrieval\n", 334},
{" -F, --flush delete old messages from server\n", 335},
{" -n, --norewrite don't rewrite header addresses\n", 336},
{" -l, --limit don't fetch messages over given size\n", 337},
{" -w, --warnings interval between warning mail notification\n", 338},
{" -T, --netsec set IP security request\n", 339},
{" -S, --smtphost set SMTP forwarding host\n", 340},
{" -D, --smtpaddress set SMTP delivery domain to use\n", 341},
{" -Z, --antispam, set antispam response values\n", 342},
{" -b, --batchlimit set batch limit for SMTP connections\n", 343},
{" -B, --fetchlimit set fetch limit for server connections\n", 344},
{" -e, --expunge set max deletions between expunges\n", 345},
{" --mda set MDA to use for forwarding\n", 346},
{" --bsmtp set output BSMTP file\n", 347},
{" --lmtp use LMTP (RFC2033) for delivery\n", 348},
{" -r, --folder specify remote folder name\n", 349},
{"Required APOP timestamp not found in greeting\n", 350},
{"Timestamp syntax error in greeting\n", 351},
{"Undefined protocol request in POP3_auth\n", 352},
{"lock busy! Is another session active?\n", 353},
{"Messages inserted into list on server. Cannot handle this.\n", 354},
{"protocol error\n", 355},
{"protocol error while fetching UIDLs\n", 356},
{"Option --remote is not supported with POP3\n", 357},
{"Success", 358},
{"Restricted user (something wrong with account)", 359},
{"Invalid userid or passphrase", 360},
{"Deity error", 361},
{"RPA token 2: Base64 decode error\n", 362},
{"Service chose RPA version %d.%d\n", 363},
{"Service challenge (l=%d):\n", 364},
{"Service timestamp %s\n", 365},
{"RPA token 2 length error\n", 366},
{"Realm list: %s\n", 367},
{"RPA error in service@realm string\n", 368},
{"RPA token 4: Base64 decode error\n", 369},
{"User authentication (l=%d):\n", 370},
{"RPA status: %02X\n", 371},
{"RPA token 4 length error\n", 372},
{"RPA rejects you: %s\n", 373},
{"RPA rejects you, reason unknown\n", 374},
{"RPA User Authentication length error: %d\n", 375},
{"RPA Session key length error: %d\n", 376},
{"RPA _service_ auth fail. Spoof server?\n", 377},
{"Session key established:\n", 378},
{"RPA authorisation complete\n", 379},
{"Get response\n", 380},
{"Get response return %d [%s]\n", 381},
{"Hdr not 60\n", 382},
{"Token length error\n", 383},
{"Token Length %d disagrees with rxlen %d\n", 384},
{"Mechanism field incorrect\n", 385},
{"dec64 error at char %d: %x\n", 386},
{"Inbound binary data:\n", 387},
{"Outbound data:\n", 388},
{"RPA String too long\n", 389},
{"Unicode:\n", 390},
{"RPA Failed open of /dev/urandom. This shouldn't\n", 391},
{" prevent you logging in, but means you\n", 392},
{" cannot be sure you are talking to the\n", 393},
{" service that you think you are (replay\n", 394},
{" attacks by a dishonest service are possible.)\n", 395},
{"User challenge:\n", 396},
{"MD5 being applied to data block:\n", 397},
{"MD5 result is: \n", 398},
{"forwarding to %s\n", 399},
{"%cMTP error: %s\n", 400},
{"BSMTP file open or preamble write failed\n", 401},
{"about to deliver with: %s\n", 402},
{"MDA open failed\n", 403},
{"%cMTP connect to %s failed\n", 404},
{"%cMTP listener doesn't like recipient address `%s'\n", 405},
{"can't even send to %s!\n", 406},
{"no address matches; forwarding to %s.\n", 407},
{"MDA exited abnormally or returned nonzero status\n", 408},
{"Message termination or close of BSMTP file failed\n", 409},
{"SMTP listener refused delivery\n", 410},
{"LMTP delivery error on EOM\n", 411},
{"Unexpected non-503 response to LMTP EOM: %s\n", 412},
{"fetchmail: socketpair failed\n", 413},
{"fetchmail: fork failed\n", 414},
{"dup2 failed\n", 415},
{"running %s %s %s\n", 416},
{"execl(%s) failed\n", 417},
{"fetchmail: getaddrinfo(%s.%s)\n", 418},
{"fetchmail: illegal address length received for host %s\n", 419},
{"malloc failed\n", 420},
{"realloc failed\n", 421},
};
int _msg_tbl_length = 421;