2006-12-28 Michael Olson <mwolson@gnu.org>
* erc-list.el: Change header to mention that this is part of ERC,
rather than GNU Emacs.
* erc-networks.el (erc-server-alist): Add Ars OpenIRC and
LinuxChix networks. Thanks to Angelina Carlton for mentioning
them. Properly escape periods in Konfido.Net and Kewl.Org.
(erc-networks-alist): Add entries for Ars and LinuxChix, though
the latter does not actually provide an announced network name.
* erc-services.el (erc-nickserv-identify-mode): Add 'both method,
which waits for a NickServ message if the network supports it,
otherwise sends the password after connecting.
(erc-nickserv-identify-mode): Default to 'both.
(erc-nickserv-passwords): Add OFTC and Azzurra to custom options.
(erc-nickserv-alist): Indentation fix.
(erc-nickserv-identify-on-connect)
(erc-nickserv-identify-on-nick-change): Handle 'both method.
2006-12-28 Leo <sdl.web@gmail.com> (tiny change)
* erc.el (erc-iswitchb): Wrap body in unwind-protect so that
hitting C-g does not leave iswitchb-mode on.
2006-12-27 Michael Olson <mwolson@gnu.org>
* erc.el (erc-cmd-RECONNECT): New command that calls
erc-server-reconnect.
* erc-backend.el (erc-server-reconnect-count): New server variable
that keeps track of reconnection attempts.
(erc-server-reconnect-attempts): New option that determines the
number of reconnection attempts that ERC will make per server.
(erc-server-reconnect-timeout): New option that determines the
amount of time, in seconds, that ERC will wait between successive
reconnect attempts.
(erc-server-reconnect): New function that reestablishes the
current IRC connection. Move some commands from
erc-process-sentinel-1 here.
(erc-process-sentinel-1): If we have been disconnected, loop until
we either reconnect or run out of attempts.
(erc-server-reconnect-p): Move higher and make this a defsubst,
since I'm worried about the current buffer changing from
underneath us. Implement limit of number of reconnect attempts..
* erc.texi (Getting Started): Update for /RECONNECT command.
2006-12-26 Michael Olson <mwolson@gnu.org>
* erc.el (erc-open): Restore old point correctly, or at least get
closer to doing so than before.
2006-12-13 Leo <sdl.web@gmail.com> (tiny change)
* erc.el (erc-iswitchb): Temporarily enable iswitchb mode if it
isn't active already, instead of leaving it on.
2006-12-10 Juanma Barranquero <lekktu@gmail.com>
* erc-ezbounce.el (erc-ezb-init-session-list): Doc fix.
2006-12-08 Michael Olson <mwolson@gnu.org>
* erc.el: Re-evaluate contributions from a contributor, and found
them under 15 lines of non-obvious code, so it is safe to remove
the copyright notice.
(erc-modules): Remove list module.
* erc-list.el: Remove, since a contributor who has not completed
their assignment has contributed significantly more than 15 lines
of code to this file.
2006-11-28 Juanma Barranquero <lekktu@gmail.com>
* erc.el (erc-cmd-BANLIST, erc-cmd-MASSUNBAN): Simplify.
(erc-prompt-for-channel-key, erc-ignore-reply-list, erc-send-post-hook)
(erc-active-buffer, erc-join-buffer, erc-frame-alist, erc-with-buffer)
(erc-modules, erc-display-message-highlight, erc-process-input-line)
(erc-cmd-HELP, erc-server-hooks, erc-echo-notice-in-user-buffers)
(erc-format-my-nick, erc-echo-notice-in-user-and-target-buffers)
(erc-echo-notice-in-first-user-buffer, erc-connection-established)
(erc-update-user-nick, erc-update-channel-member, erc-highlight-notice)
(erc-command-symbol, erc-add-query, erc-process-script-line)
(erc-determine-parameters, erc-client-info, erc-popup-input-buffer):
(erc-script-echo): Fix typos in docstrings.
(erc-channel-user-op-p, erc-channel-user-voice-p, erc-startup-file-list)
(define-erc-module, erc-once-with-server-event)
(erc-once-with-server-event-global, erc-debug-irc-protocol)
(erc-log-irc-protocol, erc-cmd-LOAD, erc-update-user)
(erc-update-current-channel-member, erc-load-script):
(erc-mode-line-away-status-format): Doc fixes.
2006-11-20 Andrea Russo <rastandy@inventati.org> (tiny change)
* erc-dcc.el (erc-dcc-chat-setup): Initialize `erc-input-marker'
before calling `erc-display-prompt'.
2006-11-24 Juanma Barranquero <lekktu@gmail.com>
* erc.el (erc-after-connect, erc-open-ssl-stream)
(erc-display-line-1, erc-display-line):
* erc-backend.el (005): Fix space/tab mixup in docstrings.
2006-11-20 Michael Olson <mwolson@gnu.org>
* erc.el (erc-version-string): Call this Version 5.2 stable
pre-release, since it diverges slightly from our 5.2 branch, in
that unstable features are not included.
(erc-update-modules): Display better error message when module not
found.
2006-11-12 Michael Olson <mwolson@gnu.org>
* erc-log.el: Save all log buffers when Emacs exits, in case
someone ignores the warning about open processes. Remove the
advice code in the commentary.
(erc-save-query-buffers): Docfix.
(erc-log-save-all-buffers): New function that saves all ERC
buffers to logs.
(erc-current-logfile): Fix bug in filename selection, where the
current buffer was erroneously being preferred over the given
buffer.
2006-11-08 Michael Olson <mwolson@gnu.org>
* erc.el (erc-string-to-port): Avoid error when a numerical port
is passed. Thanks to Zekeriya KOÇ for the report.
2006-11-08 Łukasz Demianiuk <ldemianiuk@gmail.com> (tiny change)
* erc.el (erc-header-line): Fix typo.
2006-11-06 Juanma Barranquero <lekktu@gmail.com>
* erc-dcc.el (erc-dcc-send-file): Fix typo in error message.
* erc.el (read-passwd):
* erc-autoaway.el (erc-autoaway-reestablish-idletimer):
* erc-truncate.el (truncate): Fix typo in docstring.
2006-10-21 Michael Olson <mwolson@gnu.org>
* erc.el (erc-iswitchb): Fix bug when hitting C-c C-b without
first loading iswitchb. Thanks to Leo for the report.
2006-10-10 Michael Olson <mwolson@gnu.org>
* erc.el (erc-default-port): Make the default be 6667 instead of
ircd. since Mac OS X apparently has problems with looking up that
port name.
* erc-backend.el (353): Receive names after displaying the initial
message, instead of before.
2006-10-05 Diane Murray <disumu@x3y2z1.net>
* erc.el (erc-my-nick-face): New face.
(erc): Use FULL-NAME argument, not `erc-user-full-name'. This
fixes a bug where the :full-name argument passed to the function
was not respected.
(erc-format-my-nick): Use `erc-my-nick-face'. This should help
make it easier to find messages you sent in conversations when
`erc-show-my-nick' is non-nil.
(erc-compute-server): Doc fix.
2006-10-01 John J Foerch <jjfoerch@earthlink.net> (tiny change)
* erc-stamp.el (erc-insert-timestamp-right): Exclude the newline
from the erc-timestamp field.
2006-09-11 Michael Olson <mwolson@gnu.org>
* erc-nicklist.el (erc-nicklist-insert-contents): Add missing
parenthesis. Thanks to Stephan Stahl for the report.
2006-09-10 Eric Hanchrow <offby1@blarg.net> (tiny change)
* erc.el (erc-cmd-IGNORE): Prompt user if this might be a regexp
instead of a single user.
2006-09-10 Michael Olson <mwolson@gnu.org>
* erc.el (erc-generate-new-buffer-name): If this is a server
buffer and a process exists already, create a new buffer.
(erc-open): If the IRC session was continued, restore the old
point. Thanks to Stephan Stahl for the report.
(erc-member-ignore-case): Coding style tweak.
(erc-cmd-UNIGNORE): Quote the user before comparison. If we don't
find the user listed verbatim, try to match them against the list
using string-match. In this case, prompt as to whether the regexp
should be removed.
(erc-ignored-user-p): Remove CL-ism.
* erc-autoaway.el (erc-autoaway-possibly-set-away): Check to see
whether we are already away.
* erc-menu.el: Fix potential compiler warning.
2006-09-07 Diane Murray <disumu@x3y2z1.net>
* erc.el: Updated Commentary and URL.
(erc-iswitchb, erc-display-line, erc-set-modes, erc-update-modes)
(erc-arrange-session-in-multiple-windows): No need to check if
`erc-server-process' is bound.
(erc-server-buffer-live-p): Doc fix.
(erc-part-from-channel): Don't use any initial contents at prompt.
(erc-format-nick, erc-format-@nick): Doc fix. Use `when'.
(s367): Fixed to support only banmask and channel which is the
standard. Also, there's no reason to add a message to each banned
user entry trying to persuade the user to use /banlist instead of
/mode #channel +b. That part of the message was a little
confusing, anyways.
(s367-set-by): New catalog entry. The user who set the ban and
the time of ban seem to be specific to only certain servers such
as freenode.
* erc-autoaway.el (erc-autoaway-idletimer): Doc fix.
* erc-backend.el (erc-server-process-alive): No need to check if
`erc-server-process' is bound.
(367): Use s367 or s367-set-by where appropriate.
* erc-compat.el: Fixed URL.
* erc-dcc.el: Updated copyright years. Added Usage section.
Changed supported Emacs version number from 21.3.50 to 22 in
Commentary.
* erc-ibuffer.el (erc-server-name, erc-target, erc-away): No need
to check if `erc-server-process' is bound.
* erc-nicklist.el: Added to the Commentary section an explanation
that `erc-nicklist-quit' should be called from within the nicklist
buffer. Set file coding to utf-8 so a contributor's name is
displayed correctly.
(erc-nicklist-icons-directory): Use customize type directory
instead of string.
(erc-nicklist-insert-contents): Set bbdb-nick to an empty string
if it wasn't found. This fixes a bug where an error would occur
when using `string=' on bbdb-nick if it was nil.
* erc-replace.el: Removed URL from file information since it
doesn't exist.
* erc-sound.el: Updated copyright years. Fixed Commentary and
added Usage section.
(define-erc-module): Add and remove `erc-ctcp-query-SOUND' to
`erc-ctcp-query-SOUND-hook' here. Removed the keybinding
definitions.
(erc-play-sound, erc-default-sound, erc-cmd-SOUND)
(erc-ctcp-query-SOUND): Doc fix.
(erc-play-command): Removed, not necessary anymore.
(erc-ctcp-query-SOUND-hook): Set to nil as default. Moved up
higher in code, added docstring.
(erc-play-sound): Use `play-sound-file'. It exists in GNU Emacs
as well since version 21 or earlier. Removed commented-out older
version of function.
* NEWS: Fixed formatting, added channel tracking change.
2006-09-03 Diane Murray <disumu@x3y2z1.net>
* erc.el: M-x erc RET can now be used to start ERC.
(erc-open): Renamed from `erc'.
(erc-before-connect): Change erc-select to erc.
(erc): Renamed from `erc-select'. Use `erc-open'.
(erc-select): Defined as alias of `erc'.
(erc-ssl): Renamed from `erc-select-ssl'. Use `erc'.
(erc-select-ssl): Defined as alias of `erc-ssl'.
(erc-cmd-SERVER): Use `erc'.
(erc-query, erc-handle-irc-url): Use `erc-open'.
* erc-backend.el (erc-process-sentinel-1, JOIN): Use `erc-open'.
* erc-menu.el (erc-menu-definition): Use `erc'.
* erc-networks.el: Updated copyright years.
(erc-server-select): Use keyword arguments when calling `erc'.
* erc.texi (Getting Started, Connecting): Changed erc-select to
erc.
* README: Changed erc-select to erc.
* NEWS: Added note about these changes.
* FOR-RELEASE: Marked this item as done.
2006-08-21 Diane Murray <disumu@x3y2z1.net>
* erc-track.el (erc-track-mode-line-mouse-face): New variable.
(erc-make-mode-line-buffer-name): Add help-echo and mouse-face
properties to channel name.
2006-08-20 Michael Olson <mwolson@gnu.org>
* erc-identd.el (erc-identd): New customization group.
(erc-identd-port): New option that specifies the port to use if
none is given as an argument to erc-identd-start.
(identd): Place erc-identd-quickstart in erc-connect-pre-hook
instead of erc-identd-start so that we deal with the different
meaning of the first argument.
(erc-identd-start): Use erc-identd-port.
(erc-identd-quickstart): New function that ignores any arguments
and calls erc-identd-start.
* erc.el (erc-with-server-buffer): New macro that switches to the
current ERC server buffer and runs some code. If no server buffer
is available, return nil. This is a useful way to access
variables in the server buffer.
(erc-get-server-user, erc-add-server-user)
(erc-remove-server-user, erc-change-user-nickname)
(erc-get-server-nickname-list, erc-get-server-nickname-alist)
(erc-ison-p, erc-active-buffer, erc-cmd-IGNORE)
(erc-cmd-UNIGNORE, erc-cmd-IDLE, erc-cmd-NICK, erc-cmd-BANLIST)
(erc-cmd-MASSUNBAN, erc-nickname-in-use, erc-ignored-user-p)
(erc-format-channel-modes): Use it.
(erc-once-with-server-event, erc-once-with-server-event-global)
(erc-with-buffer, erc-with-all-buffers-of-server): Use make-symbol
instead of gensym.
(erc-open-server-buffer-p): New function that returns non-nil if
the given buffer is an ERC server buffer that has an open IRC
process.
(erc-with-buffer): Use buffer-live-p here to set a good example,
though it isn't really needed here.
(erc-away): Mention erc-away-time.
(erc): Don't propagate the erc-away setting, since it makes more
sense to access it from the server buffer. Set up the prompt
before connecting rather than after. Run erc-connect-pre-hook
with the buffer as an argument, instead of no arguments.
(erc-cmd-GAWAY): Use erc-open-server-buffer-p instead of
erc-server-buffer-p so that only open connections are set away.
(erc-cmd-GQUIT): Use erc-open-server-buffer-p.
(erc-process-away): Docfix. Don't set erc-away in channel
buffers.
(erc-set-current-nick): Make this uniform with the style used in
erc-current-nick.
(erc-away-time): Rename from erc-away-p, since this is no longer a
boolean-style predicate.
(erc-format-away-status): Use it.
(erc-initialize-log-marker): Accept a `buffer' argument.
(erc-connect-pre-hook): Docfix.
(erc-connection-established): Make sure this runs in the correct
buffer.
(erc-set-initial-user-mode): Accept a `buffer' argument.
* erc-stamp.el (erc-add-timestamp): Use erc-away-time.
* erc-spelling.el (erc-spelling-init): Use
erc-with-server-buffer. Accept `buffer' argument.
(spelling): Call erc-spelling-init with the `buffer' argument.
* erc-speedbar.el (erc-speedbar-buttons): Use erc-server-buffer-p.
* erc-pcomplete.el (pcomplete/erc-mode/UNIGNORE)
(pcomplete-erc-all-nicks): Use erc-with-server-buffer.
* erc-notify.el (erc-notify-timer, erc-cmd-NOTIFY): Use
erc-with-server-buffer.
* erc-networks.el (erc-network, erc-current-network)
(erc-network-name): Use erc-with-server-buffer.
* erc-netsplit.el (erc-cmd-WHOLEFT): Use erc-with-server-buffer.
* erc-match.el (erc-log-matches, erc-log-matches-come-back): Use
erc-away-time.
* erc-log.el (log): Use erc-away-time. Remove unnecessary check.
Pass `buffer' argument to erc-log-setup-logging instead of setting
the current buffer. Ditto for erc-log-disable-logging.
(erc-log-setup-logging, erc-log-disable-loggin): Accept a `buffer'
argument.
* erc-list.el (erc-chanlist): Use erc-with-server-buffer.
* erc-ibuffer.el (erc-away): Use erc-away-time.
* erc-dcc.el (erc-dcc-get-filter): Temporarily make the buffer
read only instead of permanently doing so.
* erc-compat.el (erc-gensym, *erc-sym-counter*): Remove, since
Emacs Lisp has make-symbol, which is better.
* erc-chess.el (erc-chess-handler, erc-cmd-CHESS): Use
erc-with-server-buffer.
* erc-capab.el (capab-identify): Only deal with server buffers
that have an open IRC process.
(erc-capab-identify-add-prefix): Use erc-with-server-buffer.
* erc-backend.el (erc-server-connected): Docfix. Recommend the
`erc-server-process-alive' function.
(erc-coding-system-for-target): Supply a default target if one is
not given.
(erc-server-send): Simplify slightly.
(erc-call-hooks): Use erc-with-server-buffer.
(erc-server-connect, erc-server-setup-periodical-ping): Accept
`buffer' argument.
* erc-autoaway.el (erc-autoaway-reestablish-idletimer): Move
higher to avoid an automatic load snafu.
(erc-autoaway-some-server-buffer): New function that returns an
ERC server buffer with a live connection, or nil otherwise.
(erc-autoaway-insinuate-maybe): New function that adds the
autoaway reset function to post-command-hook if at least one ERC
process is alive.
(erc-autoaway-remove-maybe): New function that removes the
autoaway reset function from post-command-hook if no ERC process
is alive.
(autoaway): Don't touch post-command-hook unless an IRC process is
already open. Remove our addition to post-command-hook as soon as
there are no more IRC processes open. Reset the indicators before
connecting to an IRC server, which fixes a bug when re-connecting.
(erc-autoaway-reset-idle-user): Call erc-autoaway-remove-maybe if
there are no more IRC processes open.
(erc-autoaway-set-back): Pick an open IRC process. Accept an
argument which is a function call if we can't find one.
(erc-autoaway-some-open-server-buffer): New function which returns
an ERC server buffer with an open connection and a user that is
not away.
(erc-autoaway-possibly-set-away, erc-autoaway-set-away): Use it.
(erc-autoaway-set-away): Accept a `notest' argument which is used
to avoid testing the same thing twice.
(erc-autoaway-last-sent-time, erc-autoaway-caused-away): Move
higher in file to fix byte-compile warning.
2006-08-20 Diane Murray <disumu@x3y2z1.net>
* erc-backend.el (erc-process-sentinel-1): Doc fix. Let
`erc-server-reconnect-p' check all condition cases.
(erc-server-reconnect-p): Moved rest of checks from
`erc-process-sentinel-1' to here. Now takes an argument, EVENT.
2006-08-14 Diane Murray <disumu@x3y2z1.net>
* erc-menu.el: Updated copyright years. Removed EmacsWiki URL.
(erc-menu-definition): Name the menu "ERC" instead of "IRC" to
avoid confusion with rcirc and other clients.
* erc-backend.el (erc-server-banned): New variable.
(erc-server-connect): Set `erc-server-banned' to nil.
(erc-process-sentinel-1): Use `erc-server-reconnect-p'.
(erc-server-reconnect-p): New function. Return non-nil if the
user wants automatic reconnects and if the user has not been
banned from the server. This should fix a bug where ERC gets into
a loop trying to reconnect with no way to stop it when the user is
denied access to the server due to a server ban. It might also
help when Tor users are blocked from freenode if freenode servers
send the 465 message before disconnecting.
(465): Handle "banned from server" error notices.
2006-08-13 Romain Francoise <romain@orebokech.com>
* erc-match.el (erc-log-matches-make-buffer): End `y-or-n-p'
prompt with a space.
2006-08-13 Michael Olson <mwolson@gnu.org>
* erc-backend.el (erc-server-timed-out): New variable that
indicates whether the current connection has timed out due to
failure to respond to a ping.
(erc-server-send-ping): Set erc-server-timed-out to t.
(erc-server-connect): Initialize erc-server-timed-out to nil.
(erc-process-sentinel-1): Consult erc-server-timed-out.
2006-08-11 Michael Olson <mwolson@gnu.org>
* erc-fill.el (erc-fill): Skip any initial empty lines so that we
avoid errors when inserting disconnect messages and other messages
that begin with newlines.
2006-08-07 Michael Olson <mwolson@gnu.org>
* erc-backend.el (erc-process-sentinel-1): Use erc-display-message
in several places instead of inserting text.
(erc-process-sentinel): Move to the input-marker before removing
the prompt.
* erc.el (erc-port): Fix customization options.
(erc-display-message): Handle null type explicitly. Previously,
this was relying on a chance side-effect. Cosmetic indentation
tweak.
(english): Add 'finished and 'terminated entries to the catalog.
Add initial and terminal newlines to 'disconnected and
'disconnected-noreconnect entries. Avoid long lines.
(erc-cmd-QUIT): Bind the current erc-server-process to
server-proc. If the IRC server responds quickly, it is possible
for the connection to close, and hence server buffer to be killed,
if erc-kill-server-buffer-on-quit is non-nil. This avoids that
problem.
2006-08-06 Michael Olson <mwolson@gnu.org>
* erc-backend.el (erc-server-send-queue): Update from Circe
version of this function.
(erc-server-ping-timer-alist): New variable that keeps track of
ping timers according to their associated server.
(erc-server-last-received-time): New variable that specifies the
time of the last message we received from the server. This is
used to detect hung processes.
(erc-server-send-ping): New function that sends a ping to the IRC
process corresponding with the given buffer. Split from
erc-server-setup-periodical-ping. If the server buffer no longer
exists, cancel the timer. If the server process has not given us
a message, including PING responses, since the last PING, kill it.
This is necessary to deal with some aberrant freenode behavior.
Idea taken from rcirc.
(erc-server-setup-periodical-ping): Rename from
erc-server-setup-periodical-server-ping.
(erc-server-filter-function): Use erc-current-time instead of
current-time.
* erc.el (erc-arrange-session-in-multiple-windows): Fix bug with
multi-tty Emacs.
(erc-select-startup-file): Fix bug introduced by recent change.
(erc-cmd-QUIT): If the IRC process has not terminated itself
within 4 seconds of completing our quit-hook, kill it manually.
Freenode in particular needs this.
(erc-connection-established): Use erc-server-setup-periodical-ping
instead of erc-server-setup-periodical-server-ping.
2006-08-05 Michael Olson <mwolson@gnu.org>
* erc-log.el (erc-log-standardize-name): New function that returns
a filename that is safe for use for a log file.
(erc-current-logfile): Use it.
* erc.el (erc-startup-file-list): Search in ~/.emacs.d first,
since that is a fairly standard directory.
(erc-select-startup-file): Re-write to use
convert-standard-filename, which will ensure that MS-DOS systems
look for the _ercrc.el file.
2006-08-02 Michael Olson <mwolson@gnu.org>
* erc.el (erc-version-string): Release ERC 5.1.4.
* Makefile, NEWS, erc.texi: Update for the 5.1.4 release.
* erc.el (erc-active-buffer): Fix bug that caused messages to go
to the wrong buffer. Thanks to offby1 for the report.
* erc-backend.el (erc-coding-system-for-target): Handle case where
target is nil. Thanks to Kai Fan for the patch.
2006-07-29 Michael Olson <mwolson@gnu.org>
* erc-log.el (erc-log-setup-logging): Don't offer to save the
buffer. It will be saved automatically killed. Thanks to Johan
Bockgård and Tassilo Horn for pointing this out.
2006-07-27 Johan Bockgård <bojohan@users.sourceforge.net>
* erc.el (define-erc-module): Make find-function and find-variable
find the names constructed by `define-erc-module' in Emacs 22.
2006-07-14 Michael Olson <mwolson@gnu.org>
* erc-log.el (log): Make sure that we enable logging on
already-opened buffers as well, in case the user toggles this
module after loading ERC. Also be sure to remove logging ability
from all ERC buffers when the module is disabled.
(erc-log-setup-logging): Set buffer-file-name to nil rather than
the empty string. This should fix some errors that occur when
quitting Emacs without first killing all ERC buffers.
(erc-log-disable-logging): New function that removes the logging
ability from the current buffer.
* erc-spelling.el (spelling): Use dolist and buffer-live-p.
2006-07-12 Michael Olson <mwolson@gnu.org>
* erc-match.el (erc-log-matches): Bind inhibit-read-only rather
than call toggle-read-only.
* erc.el (erc-handle-irc-url): Move here from erc-goodies.el and
add autoload cookie.
2006-07-09 Michael Olson <mwolson@gnu.org>
* erc.el (erc-version-string): Release ERC 5.1.3.
* erc.texi: Update for the 5.1.3 release.
* erc-autoaway.el (erc-autoaway-set-back): Fix bug after returning
from being set automatically away and current buffer is not an ERC
buffer.
* erc-identd.el: Fix compiler error.
* erc.texi (Development): Use @subheading instead of @subsection.
(Advanced Usage): Add menu.
(Connecting): Fully document how to connect to an IRC server.
(Options, Tips and Tricks, Sample Configuration): New unwritten
sections.
* erc.el (erc-server, erc-port, erc-nick, erc-nick-uniquifier)
(erc-user-full-name, erc-password): Docfixes and customization
interface tweaks.
(erc-try-new-nick-p): Rename from
`erc-manual-set-nick-on-bad-nick-p' and invert meaning.
(erc-nickname-in-use): Use `erc-try-new-nick-p'. Check the length
of `erc-nick-uniquifier', in case someone wants multiple
characters.
(erc-compute-server, erc-compute-nick, erc-compute-full-name)
(erc-compute-port): Docfixes.
* erc-log.el (log): Move all add-hook calls here, rather than
executing them immediately, and also cause them to be un-hooked
when the module is removed.
(erc-save-buffer-on-part): Move next to
`erc-save-queries-on-quit'.
(erc-save-buffer-on-quit, erc-save-queries-on-quit): Default to t.
(erc-log-write-after-send, erc-log-write-after-insert): Default to
nil. This makes things fast, but reasonably failsafe, by default.
2006-07-08 Michael Olson <mwolson@gnu.org>
* erc-log.el (erc-log-insert-log-on-open): Make this nil by
default, since most IRC clients don't do this.
(erc-log-write-after-send): New option that determines whether the
log file will be written to after every sent message.
(erc-log-write-after-insert): New option that determines whether
the log file will be written to when new text is added to a logged
ERC buffer.
(log): Use the aforementioned options.
* erc.texi (Modules): Document the "completion" module.
* erc-pcomplete.el (pcomplete-erc-nicks): Make sure that we don't
have a nil element in the list when ignore-self is non-nil.
2006-07-05 Michael Olson <mwolson@gnu.org>
* erc.el (erc-modules): Use `set' instead of `set-default', since
this setting should never be buffer-local. Add the `page' module
to the list.
* erc.texi (Modules): Add entries for `list' and `page' modules.
Change "spell" to "spelling".
(History): Use past tense throughout.
2006-07-02 Michael Olson <mwolson@gnu.org>
* erc-backend.el (erc-call-hooks): Fix (stringp nil) error that
can happen when doing /PART.
* erc.el (erc-quit-reason-various-alist)
(erc-part-reason-various-alist): In the example, use "^$" as an
example, since "" matches anything.
(erc-quit-reason-various, erc-part-reason-various): If no argument
is given, and no matches are found, use our default reason instead
of "nil".
2006-06-30 Michael Olson <mwolson@gnu.org>
* erc.texi (Modules): Mention identd.
(Releases): Update mailing list address and download location.
(Development): Refactor. Provide updated directions for Arch.
Make URLs clickable.
(Keystroke Summary): Typo fix. Use more Texinfo syntax.
(Getting Started): Give simpler example. We do not need to
explicitly load every module.
(History): Update.
* erc-autoaway.el, erc-join.el, erc-backend.el, erc-bbdb.el:
erc-button.el, erc-chess.el, erc-compat.el, erc-hecomplete.el:
erc-dcc.el, erc-ezbounce.el, erc-fill.el, erc-ibuffer.el:
erc-imenu.el, erc-list.el, erc-log.el, erc-match.el, erc-menu.el:
erc-networks.el, erc-netsplit.el, erc-nicklist.el:
erc-services.el, erc-pcomplete.el, erc-replace.el, erc-ring.el:
erc-speedbar.el, erc-spelling.el, erc-stamp.el, erc-track.el:
erc.el: Remove version strings.
* erc.el (erc-cmd-SMV): Remove, since we do not have meaningful
module versions anymore.
(erc-version-modules): Remove, since we do not use this function
anymore.
(erc-latest-version, erc-ediff-latest-version): Remove, since this
was only useful back when ERC consisted of one file.
(erc-modules): Add line for identd.
(erc-get-channel-mode-from-keypress): Typo fix.
* erc-imenu.el: Remove unnecessary lines in header.
* erc-goodies.el (erc-handle-irc-url): Docfix.
* erc-identd.el: Define an ERC module for this.
(erc-identd-start): Don't create a process buffer if possible.
Otherwise, use conventional hidden names for process buffers.
2006-06-29 Michael Olson <mwolson@gnu.org>
* erc-backend.el (erc-coding-system-for-target): Match
case-insensitively. Use a pattern match instead of `assoc', as
per the documentation for `erc-encoding-coding-alist'.
* erc-track.el (erc-track-shorten-aggressively): Fix typo.
2006-06-27 Michael Olson <mwolson@gnu.org>
* erc.el: Update maintainer information and URLs.
2006-06-14 Michael Olson <mwolson@gnu.org>
* erc.el (erc-active-buffer): If the active buffer has been
deleted, default to the server buffer.
(erc-toggle-flood-control): When the user hits C-c C-f, make flood
control really toggle, not unconditionally turn off.
2006-06-12 Michael Olson <mwolson@gnu.org>
* NEWS: Add items since the 5.1.2 release.
* erc-autoaway.el (erc-autoaway-caused-away): New variable that
indicates whether the current away status was caused by this
module.
(erc-autoaway-set-back): Only set back if this module set the user
away.
(erc-autoaway-set-away): Update `erc-autoaway-caused-away'.
(erc-autoaway-reset-indicators): New function that resets some
indicators when the user is no longer away.
(autoaway): Add the above function to the 305 hook.
2006-06-05 Romain Francoise <romain@orebokech.com>
* erc.texi (History): Fix various typos.
2006-06-04 Michael Olson <mwolson@gnu.org>
* erc-autoaway.el (erc-autoaway-idle-method): Move after the
definition of the autoaway module.
(autoaway): Don't do anything if erc-autoaway-idle-method is
unbound. This prevents an error on startup.
2006-06-03 Michael Olson <mwolson@gnu.org>
* erc-autoaway.el: Thanks to Mark Plaksin for the ideas and patch.
(erc-autoaway-idle-method): Renamed from
`erc-autoaway-use-emacs-idle'. We have more than two choices for
how to do this, so it's best to make this take symbol values.
Improve documentation. Remove warning against Emacs idle-time;
the point is moot now that we get user idle time via a different
method. Make sure we disable and re-enable the module when
changing this value.
(autoaway): Conditionalize on the above option. If using the idle
timer or user idle methods, don't add anything to the
send-completed or server-001 hooks, since it is unnecessary.
(erc-autoaway-reestablish-idletimer, erc-autoaway-message):
Docfix.
(erc-autoaway-idle-seconds): Use erc-autoaway-idle-method.
(erc-autoaway-reset-idle-irc): Renamed from
`erc-autoaway-reset-idle'. Don't pass line to
`erc-autoaway-set-away', since it is not used.
(erc-autoaway-reset-idle-user): New function that resets the idle
state for user idle time.
(erc-autoaway-set-back): Remove line argument, since it is not
used.
2006-06-01 Michael Olson <mwolson@gnu.org>
* erc.el (erc-buffer-filter): Make sure all buffers returned from
this are live.
2006-05-01 Edward O'Connor <ted@oconnor.cx>
* erc-goodies.el (erc-handle-irc-url): New function, suitable as
a value for `url-irc-function'.
2006-04-18 Diane Murray <disumu@x3y2z1.net>
* erc-pcomplete.el (pcomplete-erc-nicks): Added new optional
argument IGNORE-SELF. If this is non-nil, don't return the user's
current nickname. Doc fix.
(pcomplete/erc-mode/complete-command): Don't complete the current
nickname.
2006-04-05 Diane Murray <disumu@x3y2z1.net>
* erc.el (erc-cmd-SV): Removed the exclamation point. Show the
build date as it's shown in `emacs-version'.
* erc-capab.el (erc-capab-identify-add-prefix): Insert the prefix
with the same face property as the previous character.
2006-04-02 Michael Olson <mwolson@gnu.org>
* erc-backend.el, erc-ezbounce.el, erc-join.el, erc-netsplit.el,
erc.el: Make sure to include a newline inside of negated classes,
so that a newline is not matched.
2006-04-01 Michael Olson <mwolson@gnu.org>
* erc-backend.el (erc-server-connect-function): Don't try to
detect the existence of the `open-network-stream-nowait' function,
since I can't find it in Emacs21, XEmacs21, or Emacs22.
2006-03-27 Michael Olson <mwolson@gnu.org>
* erc.texi: Update direntry. Remove unneeded local variables.
2006-03-26 Michael Olson <mwolson@gnu.org>
* erc.el (erc-header-line): New face that will be used to colorize
the text of the header-line, provided that
`erc-header-line-face-method' is non-nil.
(erc-prompt-face): Fix formatting.
(erc-header-line-face-method): New option that determines the
method used for colorizing header-line text. This may be a
function, nil, or non-nil.
(erc-update-mode-line-buffer): Use the aforementioned option and
face to colorize the header-line text, if that is what the user
wants.
(erc-send-input): If flood control is not activated, don't split
the input line.
2006-03-25 Michael Olson <mwolson@gnu.org>
* erc.el (erc-cmd-QUOTE): Install patch from Aravind Gottipati
that fixes the case where there is no leading whitespace. Only
remove the first space character, though.
* erc-identd.el (erc-identd-start): Fix a bug by making sure that
erc-identd-process is set properly.
(erc-identd-start, erc-identd-stop): Add autoload cookies.
(erc-identd-start): Pass :host parameter so this works with Emacs
22.
2006-03-09 Diane Murray <disumu@x3y2z1.net>
* erc-button.el (erc-button-keymap): Use <backtab> rather than
<C-tab> for `erc-button-previous' as it is a more standard key
binding for this type of function.
2006-02-28 Diane Murray <disumu@x3y2z1.net>
* erc-capab.el: Removed things that were accidentally committed on
2006-02-20. Removed Todo section.
(erc-capab-unidentified): Removed.
2006-02-26 Michael Olson <mwolson@gnu.org>
* erc-capab.el: Use (eval-when-compile (require 'cl)).
(erc-capab-unidentified): Fix compiler warning by specifying
group.
2006-02-20 Diane Murray <disumu@x3y2z1.net>
* erc-capab.el (erc-capab-send-identify-messages): Fixed comment
to explain thoughts better. `erc-server-parameters' is an
associated list when it's set, not a string.
2006-02-19 Michael Olson <mwolson@gnu.org>
* erc-capab.el (erc-capab-send-identify-messages): Make sure some
parameters are strings before using them. Thanks to Alejandro
Benitez for the report.
* erc.el (erc-version-string): Release ERC 5.1.2.
2006-02-19 Diane Murray <disumu@x3y2z1.net>
* erc-button.el (erc-button-keymap): Bind `erc-button-previous' to
<C-tab>.
(erc-button-previous): New function.
2006-02-15 Michael Olson <mwolson@gnu.org>
* NEWS: Add category for ERC 5.2.
* erc.el (erc): Move to the end of the buffer when a continued
session is detected. Thanks to e1f and indio for the report and
testing a potential fix.
2006-02-14 Michael Olson <mwolson@gnu.org>
* debian/changelog: Prepare a new Debian package.
* Makefile (debprepare): New rule that creates an ERC snapshot
directory for use in both new Debian releases and revisions for
Debian packages.
(debrelease, debrevision-mwolson): Use debprepare.
* NEWS: Bring up-to-date.
* erc-stamp.el (erc-insert-timestamp-right): For now, put
timestamps before rather than after erc-fill-column when
erc-timestamp-right-column is nil. This way we won't surprise
anyone unpleasantly, or so it is hoped.
2006-02-13 Michael Olson <mwolson@gnu.org>
* erc-dcc.el: Use (eval-when-compile (require 'cl)).
2006-02-12 Michael Olson <mwolson@gnu.org>
* erc-autoaway.el, erc-dcc.el, erc-ezbounce.el, erc-fill.el
* erc-goodies.el, erc-hecomplete.el, erc-ibuffer.el, erc-identd.el
* erc-imenu.el, erc-join.el, erc-lang.el, erc-list.el, erc-log.el
* erc-match.el, erc-menu.el, erc-netsplit.el, erc-networks.el
* erc-notify.el, erc-page.el, erc-pcomplete.el, erc-replace.el
* erc-ring.el, erc-services.el, erc-sound.el, erc-speedbar.el
* erc-spelling.el, erc-track.el, erc-truncate.el, erc-xdcc.el:
Add 2006 to copyright years, to comply with the changed guidelines.
2006-02-11 Michael Olson <mwolson@gnu.org>
* erc.el (erc-update-modules): Handle erc-capab-identify
correctly. Make some requirements shorter, so that it's easier to
see why they are needed.
* erc-capab.el: Add autoload cookie for capab-identify.
(erc-capab-send-identify-messages, erc-capab-identify-activate):
Minor whitespace fix in code.
* erc-stamp.el (erc-timestamp-use-align-to): Renamed from
`erc-timestamp-right-align-by-pixel'. Set the default based on
whether we are in Emacs 22, and using X. Improve documentation.
(erc-insert-aligned): Remove calculation of offset, since
:align-to pos works after all. Unlike the previous solution, this
one works when erc-stamp.el is compiled.
(erc-insert-timestamp-right): Don't add length of string, and then
later remove its displayed width. This puts timestamps after
erc-fill-column when erc-timestamp-right-column is nil, rather
than before it. It also fixes a subtle bug. Remove use of
`current-window', since there is no variable by that name in
Emacs21, Emacs22, or XEmacs21 beta. Check to see whether
`erc-fill-column' is non-nil before using it.
2006-02-11 Diane Murray <disumu@x3y2z1.net>
* erc-list.el: Define `list' module which sets the alias
`erc-cmd-LIST' to `erc-list-channels' when enabled and
`erc-list-channels-simple' when disabled.
(erc-list-channels): Was `erc-cmd-LIST', renamed.
(erc-list-channels-simple): New function.
* erc.el (erc-modules): Added `list' to enabled modules. Changed
`capab-identify' description. Moved customization options left in
source code.
* erc-menu.el (erc-menu-definition): Use `erc-list-channels'.
* erc-capab.el: Put a little more detail into Usage section.
(define-erc-module): Run `erc-capab-identify-setup' in all open
server buffers when enabling.
(erc-capab-identify-setup): Make PROC and PARSED optional
arguments.
(erc-capab-identify-add-prefix): Simplified nickname regexp. This
should now also match nicknames that are formatted differently
than the default.
* erc-spelling.el (define-erc-module): Make sure there's a buffer
before calling `with-current-buffer'.
2006-02-10 Michael Olson <mwolson@gnu.org>
* Makefile (debbuild): Split from debrelease.
(debrevision-mwolson): New rule that causes a Debian revision to
be built.
* erc.el (erc-migrate-modules): Use a better algorithm. Thanks to
Johan Bockgård.
(erc-modules): Change use of 'pcomplete to 'completion.
2006-02-09 Diane Murray <disumu@x3y2z1.net>
* erc.el (erc-get-parsed-vector, erc-get-parsed-vector-nick)
* erc-capab.el: Require erc.
(erc-capab-send-identify-messages): Use `erc-server-send'.
(erc-capab-identify-remove/set-identified-flag): Use 1 and 0 as
the flags so we can also check whether the `erc-identified' text
property is there at all.
(erc-capab-identify-add-prefix): Use `erc-capab-find-parsed'.
This fixes a bug where the prefix wasn't inserted when timestamps
are inserted on the right. Tweaked nickname regexp.
(erc-capab-find-parsed): New function.
(erc-capab-get-unidentified-nickname): Updated to check for 0
flag. Only get nickname if there's a nickuserhost associated with
this message.
* erc-capab.el: New file. Adds the new module
`erc-capab-identify', which allows flagging of unidentified users
on servers running an ircd based on dancer - irc.freenode.net, for
example.
* erc.el (erc-modules): Added `capab-identify' to options.
(erc-get-parsed-vector, erc-get-parsed-vector-nick)
(erc-get-parsed-vector-type): Moved here from erc-match.el.
* erc-match.el (erc-get-parsed-vector, erc-get-parsed-vector-nick)
(erc-get-parsed-vector-type): Moved these functions to erc.el
since they can be useful outside of the text matching module.
* NEWS: Added erc-capab.el.
* erc-dcc.el, erc-stamp.el, erc-xdcc.el: Changed "Emacs IRC Client"
to "ERC".
2006-02-07 Michael Olson <mwolson@gnu.org>
* ChangeLog.01, ChangeLog.02, ChangeLog.03, ChangeLog.04,
ChangeLog.05: Rename from ChangeLog.NNNN in order to disambiguate
the filenames in DOS.
* erc-goodies.el: Comment fix.
* erc-hecomplete.el: Rename from erc-complete.el. Update
commentary. Use define-erc-module so that it's possible to
actually use this.
(erc-hecomplete): Rename function from `erc-complete'.
(erc-hecomplete): Rename group from `erc-old-complete'. Docfix.
* erc-join.el: Rename from erc-autojoin.el.
* erc-networks.el: Rename from erc-nets.el.
* erc-services.el: Rename from erc-nickserv.el.
* erc-stamp.el (erc-insert-aligned): Don't take 3rd argument. Use
the simpler `indent-to' function when
`erc-timestamp-right-align-by-pixel' is nil.
(erc-insert-timestamp-right): If the timestamp goes on the
following line, don't add timestamp properties to the spaces in
front of it.
* erc.el (erc-migrate-modules): New function that eases migration
of module names.
(erc-modules): Call erc-migrate-modules in the :get accessor.
(erc-modules, erc-update-modules): Update for new modules names.
(erc-cmd-SMV): Remove, since this does not give useful output due
to the version strings being removed from ERC modules.
2006-02-05 Michael Olson <mwolson@gnu.org>
* erc-spelling.el (erc-spelling-init): If
`erc-spelling-dictionaries' is nil, do not set
ispell-local-dictionary. Before, it was being set to nil, which
was causing a long delay while the ispell process restarted.
(erc-spelling-unhighlight-word): New function that removes
flyspell properties from a spell-checked word.
(erc-spelling-flyspell-verify): Don't spell-check nicks or words
that have '/' before them.
2006-02-04 Michael Olson <mwolson@gnu.org>
* erc-autojoin.el: Use (eval-when-compile (require 'cl)).
* erc-complete.el (erc-nick-completion-exclude-myself)
(erc-try-complete-nick): Use better function for getting list of
channel users.
* erc-goodies.el: Docfix.
* erc-stamp.el: Use new arch tagline, since the other one wasn't
being treated properly.
* erc.el (erc-version-string): Release ERC 5.1.1.
2006-02-03 Zhang Wei <id.brep@gmail.com>
* erc.el (erc-version-string): Don't hard-code Emacs version.
(erc-version): Use emacs-version.
2006-01-31 Michael Olson <mwolson@gnu.org>
* erc-stamp.el: Update copyright years.
2006-01-30 Simon Josefsson <jas@extundo.com>
* erc.el (erc-open-ssl-stream): Use tls.el.
2006-01-30 Michael Olson <mwolson@gnu.org>
* erc-stamp.el (erc-timestamp-right-align-by-pixel): New option
that determines whether to use pixel values to align right
timestamps. The default is not to do so, since it only works with
Emacs22 on X, and even then some people have trouble.
(erc-insert-aligned): Use `erc-timestamp-right-align-by-pixel'.
2006-01-29 Michael Olson <mwolson@gnu.org>
* ChangeLog, ChangeLog.2005, ChangeLog.2004, ChangeLog.2003,
ChangeLog.2002, ChangeLog.2001: Add "See ChangeLog.NNNN" line for
earlier changes. Use utf-8 encoding. Fix some accent typos.
* erc-speedbar.el (erc-speedbar-buttons): Fix reference to free
variable.
(erc-speedbar-goto-buffer): Fix compiler warning.
* erc-ibuffer.el: Use `define-ibuffer-filter' instead of
`ibuffer-degine-limiter'. Use `define-ibuffer-column' instead of
`ibuffer-define-column'. Require 'ibuf-ext so that the macros
work without compiler warnings.
* man/erc.texi (Obtaining ERC, Installation): Note that these
sections may be skipped if using the version of ERC that comes
with Emacs.
2006-01-29 Edward O'Connor <ted@oconnor.cx>
* erc-viper.el: Remove. Now that ERC is included in Emacs, these
work-arounds live in Viper itself.
2006-01-28 Michael Olson <mwolson@gnu.org>
* erc-*.el, erc.texi, NEWS: Add Arch taglines as per Emacs
guidelines.
* erc-*.el: Space out copyright years like the rest of Emacs. Use
the Emacs copyright statement. Refer to ourselves as ERC rather
than "Emacs IRC Client", since there are now several IRC clients
for Emacs.
* erc-compat.el (erc-emacs-build-time): Define as a variable.
* erc-log.el (erc-log-setup-logging): Use write-file-functions.
* erc-ibuffer.el: Require 'erc.
* erc-stamp.el (erc-insert-aligned): Only use the special text
property when window-system is X.
* erc.texi: Adapt for inclusion in Emacs.
2006-01-28 Johan Bockgård <bojohan@users.sourceforge.net>
* erc.el (erc-format-message): More `cl' breakage; don't use
`oddp'.
2006-01-27 Michael Olson <mwolson@gnu.org>
* debian/changelog: Update for new release.
* debian/control (Description): Update.
* debian/rules: Concatenate ChangeLog for 2005.
* Makefile (MISC): Include ChangeLog.2005 and erc.texi.
(debrelease, release): Copy images directory.
* NEWS: Spelling fixes. Add items for recent changes.
* erc.el (erc): Move call to erc-update-modules before the call to
erc-mode. This should fix a timestamp display issue.
(erc-version-string): Release ERC 5.1.
2006-01-26 Michael Olson <mwolson@gnu.org>
* erc-stamp.el (erc-insert-aligned): New function that inserts
text in an perfectly-aligned way relative to the right margin. It
only works well with Emacs22. A sane fallback is provided for
other versions of Emacs.
(erc-insert-timestamp-right): Use the new function.
2006-01-25 Edward O'Connor <ted@oconnor.cx>
* erc.el (erc-modules): Ensure that `erc-button-mode' gets enabled
before `erc-match-mode'.
* erc-match.el (match): Append `erc-match-message' to
`erc-insert-modify-hook'.
2006-01-25 Michael Olson <mwolson@gnu.org>
* FOR-RELEASE: Mark last release requirement as done.
* Makefile (realclean, distclean): Remove docs.
* erc.texi: Take care of all pre-5.1 items.
* erc-backend.el (erc-server-send, erc-server-send-queue): Wrap
`process-send-string' in `condition-case' to avoid an error when
quitting ERC.
* erc-stamp.el (erc-insert-timestamp-right): Try to deal with
variable-width characters in the timestamp and on the same line.
The latter is a kludge, but it seems to work with most of the
input I've thrown at it so far. It's certainly better than going
past the end of line consistently when we have variable-width
characters on the same line. When `erc-timestamp-intangible' is
non-nil, add intangible properties to the whitespace as well, so
that hitting <end> does what you'd expect.
* erc.el (erc-flood-protect, erc-toggle-flood-control): Update
this to only use boolean values for `erc-flood-protect'. Update
documentation.
(erc-cmd-QUIT): Set the active buffer to be the server buffer, so
that any QUIT-related messages go there.
(erc): Try to be more clever about re-using channel buffers when
automatically re-connecting. Thanks to e1f for noticing.
2006-01-23 Michael Olson <mwolson@gnu.org>
* ChangeLog.2005: Remove erroneous line.
* FOR-RELEASE: Make that the Makefile tweaking is complete.
(NEWS): Mark as done.
* Makefile (MANUAL): New option indicating the name of the manual.
(PREFIX, ELISPDIR, INFODIR): New options that specify the
directories to install lisp code and info manuals to. PREFIX is
used only by ELISPDIR and INFODIR.
(all): Call `lisp' and create the manual.
(lisp): Compile lisp code.
(%.info, %.html): New rules that make Info files and HTML files,
respectively, from a TexInfo source.
(doc): Create both the Info and HTML versions of the manual. This
is for the user -- we never call it automatically.
(install-info): Install Info files.
(install-bin): Install compiled and source Lisp files.
(todo): Remove, since it seems pointless.
* NEWS: Update.
* README: Add Installation instructions. Tweak layout.
* erc.texi: Work on some pre-5.1 items.
* erc-stamp.el, erc-track.el: Move some functions and options in
order to get rid of a few compiler warnings.
* erc.el (erc-modules): Enable readonly by default. This will
prevent new users from accidentally removing old messages, which
could be disconcerting. Also enable stamp by default, since
timestamps are a fairly standard feature among IRC clients.
* erc-button.el: Munge whitespace.
* erc-identd.el (erc-identd-start): Instead of throwing an error,
just try to use the obsolete function.
2006-01-22 Michael Olson <mwolson@gnu.org>
* erc-backend.el (erc-decode-string-from-target): Make sure that
we have a string as an argument. If not, coerce it to the empty
string. Hopefully, this will work painlessly around an edge case
related to quitting ERC around the same time a message comes in.
2006-01-22 Johan Bockgård <bojohan@users.sourceforge.net>
* erc-track.el: Use `(eval-when-compile (require 'cl))' (for
`case'). Doc fixes.
(erc-find-parsed-property): Simplify.
(erc-track-get-active-buffer): Fix logic. Simplify.
(erc-track-switch-buffer): Remove unused variable `dir'. Simplify.
* erc-speak.el: Doc fixes.
(erc-speak-region): `propertize' --> `erc-propertize'.
* erc-dcc.el (erc-dcc-chat-parse-output): `propertize' -->
`erc-propertize'.
* erc-button.el (erc-button-add-button): Take erc-fill-prefix into
account when wrapping URLs.
* erc-bbdb.el (erc-bbdb-elide-display): Doc fix.
* erc-backend.el (define-erc-response-handler): Doc fix.
2006-01-22 Michael Olson <mwolson@gnu.org>
* erc.el (erc-update-modules): Use `require' instead of `load',
but prevent it from causing errors, in order to preserve the
previous behavior.
2006-01-21 Michael Olson <mwolson@gnu.org>
* FOR-RELEASE (Source): Mark cl task as done.
* Makefile (erc-auto.el): Call erc-generate-autoloads rather than
generate-autoloads.
(erc-auto.el, %.elc): Don't show command, just its output.
* NEWS: Add items from 2005-01-01 to 2005-08-13.
* debian/copyright (Copyright): Update.
* erc-auto.in (erc-generate-autoloads): Rename from
generate-autoloads.
* erc.el, erc-autoaway.el, erc-backend.el: Use
erc-server-process-alive instead of erc-process-alive.
* erc.el, erc-backend.el, erc-ezbounce.el, erc-list.el,
erc-log.el, erc-match.el, erc-nets.el, erc-netsplit.el,
erc-nicklist.el, erc-nickserv.el, erc-notify.el, erc-pcomplete.el:
Use (eval-when-compile (require 'cl)), so that compilation doesn't
fail.
* erc-fill.el, erc-truncate.el: Whitespace munging.
* erc.el: Update copyright notice. Remove eval-after-load code.
(erc-with-buffer): Docfix.
(erc-once-with-server-event, erc-once-with-server-event-global)
(erc-with-buffer, erc-with-all-buffers-of-server): Use erc-gensym
instead of gensym.
(erc-banlist-update): Use erc-delete-if instead of delete-if.
(erc): Call `erc-update-modules' here.
* erc-backend.el: Require 'erc-compat to minimize compiler
warnings.
(erc-decode-parsed-server-response): Docfix.
(erc-server-process-alive): Move here from erc.el and rename from
`erc-process-alive'.
(erc-server-send, erc-remove-channel-users): Make sure process is
alive before sending data to it.
* erc-bbdb.el: Update copyright years.
(erc-bbdb-whois): Remove overexuberant comment.
* erc-button.el: Require erc-fill, since we make liberal use of
`erc-fill-column'.
* erc-compat.el (erc-const-expr-p, erc-list*, erc-assert): New
functions, the latter of which provides an `assert' equivalent.
(erc-remove-if-not): New function that provides a simple
implementation of `remove-if-not'.
(erc-gensym): New function that provides a simple implementation
of `gensym'.
(erc-delete-if): New function that provides a simple
implementation of `delete-if'.
(erc-member-if): New function that provides a simple
implementation of `member-if'.
(field-end): Remove this, since it is unused, and later versions
of XEmacs have this function already.
(erc-function-arglist): Moved here from erc.el.
(erc-delete-dups): New compatibility function for dealing with
XEmacs.
(erc-subseq): New function copied from cl-extra.el.
* erc-dcc.el: Require pcomplete during compilation to avoid
compiler warnings.
(erc-unpack-int, erc-dcc-send-filter)
(erc-dcc-get-filter): Use erc-assert instead of assert.
(pcomplete/erc-mode/DCC): Use erc-remove-if-not instead of
remove-if-not.
* erc-match.el (erc-log-matches): Fix compiler warning.
* erc-nicklist.el: Update copyright notice.
(erc-nicklist-menu): Change use of caadr to (car (cadr ...)).
(erc-nicklist-bitlbee-connected-p): Remove.
(erc-nicklist-insert-medium-name-or-icon): Accept channel
argument. Use it to determine whether we are on bitlbee. Now
that bitlbee names its channel "&bitlbee", this is trivial.
(erc-nicklist-insert-contents): Pass channel as specified above.
Don't try to determine whether we are on bitlbee here.
(erc-nicklist-channel-users-info): Use erc-remove-if-not instead
of remove-if-not.
(erc-nicklist-search-for-nick): Use erc-member-if instead of
member-if.
* erc-notify.el (erc-notify-QUIT): Use erc-delete-if with a
partially-evaluated lambda expression instead of `delete' and
`find'.
* erc-track.el: Use erc-assert.
(erc-track-modified-channels): Remove use of `return'.
(erc-track-modified-channels): Use `cadr' instead of `second',
since otherwise we would need yet another eval-when-compile line.
2006-01-19 Michael Olson <mwolson@gnu.org>
* erc-backend.el (erc-process-sentinel-1): Remove attempt to
detect SIGPIPE, since it doesn't work.
2006-01-10 Diane Murray <disumu@x3y2z1.net>
* erc-spelling.el: Updated copyright years.
(define-erc-module): Enable/disable `flyspell-mode' for all open
ERC buffers as well.
(erc-spelling-dictionaries): Reworded customize description.
* erc.el (erc-command-symbol): New function.
(erc-extract-command-from-line): Use `erc-command-symbol'. This
fixes a bug where "Symbol's function definition is void:
erc-cmd-LIST" would be shown after typing /list at the prompt (the
command was interned because erc-menu.el uses it and is enabled by
default whereas erc-list.el is not).
* NEWS: Started a list of renamed variables.
* erc.el: Reworded the message sent when defining variable
aliases.
(erc-command-indicator-face): Doc fix.
(erc-modules): Enable the match module by default which makes
current nickname highlighting on as the default.
* erc-button.el: Updated copyright years.
(erc-button): New face.
(erc-button-face): Use `erc-button'.
(erc-button-nickname-face): New customizable variable.
(erc-button-add-nickname-buttons, erc-button-add-buttons-1): Send
new argument to `erc-button-add-button'.
(erc-button-add-button): Doc fix. Added new argument to function
definition, NICK-P. If it's a nickname, use
`erc-button-nickname-face', otherwise use `erc-button-face'. This
makes channel tracking and buttons work better together when
`erc-button-buttonize-nicks' is enabled, since there is a nickname
on just about every line.
* erc-track.el (erc-track-use-faces): Doc fix.
(erc-track-faces-priority-list): Added `erc-button' to list.
(erc-track-priority-faces-only): Doc fix.
2006-01-09 Diane Murray <disumu@x3y2z1.net>
* erc-button.el (erc-button-url-regexp): Use `concat' so the
regexp is not one long line.
(erc-button-alist): Fixed so that customizing works correctly.
Reorganized. Removed lambda functions with more than two lines.
Doc fix.
(erc-button-describe-symbol, erc-button-beats-to-time): New
functions. Moved from `erc-button-alist'.
2006-01-07 Michael Olson <mwolson@gnu.org>
* erc-backend.el (erc-process-sentinel-1): Don't try to re-open a
process if a SIGPIPE occurs. This happens when a new message
comes in at the same time a /quit is requested.
(erc-process-sentinel): Use string-match rather than string= to do
these comparisons. Matching literal newlines makes me nervous.
* erc-track.el (erc-track-remove-from-mode-line): Handle case
where global-mode-string is not a list. Emacs22 permits this.
See ChangeLog.05 for earlier changes.
Copyright (C) 2006, 2007 Free Software Foundation, Inc.
This file is part of GNU Emacs.
GNU Emacs is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING. If not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA.
;; Local Variables:
;; coding: utf-8
;; add-log-time-zone-rule: t
;; End:
;; arch-tag: 865a75f6-2bcb-46df-bf0c-b514dadf688a