# -*- Makefile -*- definition file for building GNU Emacs on Windows NT.
# Copyright (C) 2000, 2001, 2002, 2003, 2004,
# 2005, 2006, 2007 Free Software Foundation, Inc.
#
# GNU Emacs is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GNU Emacs; see the file COPYING. If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
# Boston, MA 02110-1301, USA.
# Ensure 'all' is the default target
all:
THE_SHELL = $(COMSPEC)
SHELLTYPE=CMD
MAKETYPE=nmake
CURDIR = $(MAKEDIR:\=/)
THISDIR = $(MAKEDIR)
ALL_DEPS = $**
SUBSYSTEM_WINDOWS=-subsystem:windows
SUBSYSTEM_CONSOLE=-subsystem:console
# INSTALL_DIR is the directory into which emacs will be installed.
#
!ifndef INSTALL_DIR
INSTALL_DIR = $(CURDIR)/..
!endif
# Ensure EMACSLOADPATH is defined in the environment.
#
!if [set EMACSLOADPATH=foo]
!endif
# Allow detection of builds with MSVC 5 or later, so we can
# speed up compiles (see rule at end).
#
_NMAKE_VER_5=162
_NMAKE_VER_4=0
!IFNDEF _NMAKE_VER
_NMAKE_VER=$(_NMAKE_VER_4)
!ENDIF
# Check that the INCLUDE and LIB environment variables are set.
#
!ifndef INCLUDE
!error The INCLUDE environment variable needs to be set.
!endif
!ifndef LIB
!error The LIB environment variable needs to be set.
!endif
# Determine the architecture we're running on.
# Define ARCH for our purposes;
# Define CPU for use by ntwin32.mak;
# Define CONFIG_H to the appropriate config.h for the system;
#
!ifdef PROCESSOR_ARCHITECTURE
# We're on Windows NT
CPU = $(PROCESSOR_ARCHITECTURE)
CONFIG_H = config.nt
OS_TYPE = windowsnt
! if "$(PROCESSOR_ARCHITECTURE)" == "x86"
ARCH = i386
CPU = i386
! else
! if "$(PROCESSOR_ARCHITECTURE)" == "MIPS"
ARCH = mips
! else
! if "$(PROCESSOR_ARCHITECTURE)" == "ALPHA"
ARCH = alpha
! else
! if "$(PROCESSOR_ARCHITECTURE)" == "PPC"
ARCH = ppc
! else
! error Unknown architecture type "$(PROCESSOR_ARCHITECTURE)"
! endif
! endif
! endif
! endif
!else
# We're on Windows 95
ARCH = i386
CPU = i386
CONFIG_H = config.nt
OS_TYPE = windows95
!endif
AR = lib
AR_OUT = -out:
CC = cl
CC_OUT = -Fo
LINK = link
LINK_OUT = -out:
RC = rc
RC_OUT = -Fo
RC_INCLUDE = -i
libc = libc.lib
baselibs =
O = obj
A = lib
BASE_LIBS = $(libc) $(baselibs) oldnames.lib
ADVAPI32 = advapi32.lib
COMDLG32 = comdlg32.lib
GDI32 = gdi32.lib
MPR = mpr.lib
SHELL32 = shell32.lib
USER32 = user32.lib
WSOCK32 = wsock32.lib
WINMM = winmm.lib
WINSPOOL = winspool.lib
!ifdef NOOPT
DEBUG_CFLAGS = -DEMACSDEBUG
!else
DEBUG_CFLAGS =
!endif
CFLAGS = -I. -DWIN32_LEAN_AND_MEAN -D_WIN32_WINNT=0x0400 $(ARCH_CFLAGS) -D$(ARCH) \
-D_CRTAPI1=_cdecl $(DEBUG_CFLAGS) $(USER_CFLAGS) $(LOCAL_FLAGS)
EMACS_EXTRA_C_FLAGS =
SYS_LDFLAGS = -nologo -release -incremental:no -version:3.10 -swaprun:cd -swaprun:net setargv.obj
# see comments in allocate_heap in w32heap.c before changing any of the
# -stack, -heap, or -base settings.
TEMACS_EXTRA_LINK = -stack:0x00800000 -heap:0x00100000 -base:0x01000000 -pdb:$(BLD)\temacs.pdb -machine:$(ARCH) $(SUBSYSTEM_CONSOLE) -entry:_start -map:$(BLD)\temacs.map $(EXTRA_LINK)
!ifdef NOOPT
OBJDIR = obj
!else
OBJDIR = obj-spd
!endif
$(OBJDIR):; -mkdir $(OBJDIR)
BLD = $(OBJDIR)/$(ARCH)
stamp_BLD: $(OBJDIR)
-mkdir "$(BLD)"
echo $(BLD) > $@
COMPILER_TEMP_FILES = *.pdb
CP = cp -f
CP_DIR = cp -rf
IFNOTSAMEDIR = if not exist ..\same-dir.tst
ENDIF =
FOREACH = for %%f in (
FORVAR = %%f
FORDO = ) do
ENDFOR =
ARGQUOTE = "
# "
DQUOTE = \"
DEL = rm
DEL_TREE = rm -r
!ifdef NODEBUG
DEBUG_FLAG =
DEBUG_LINK =
!else
DEBUG_FLAG = -Zi
DEBUG_LINK = -debug:full
!endif
!if "$(ARCH)" == "i386"
!ifdef NOOPT
ARCH_CFLAGS = -nologo -D_X86_=1 -c -Zel -W2 -H63 -Od -G3d -Zp8 $(DEBUG_FLAG)
!else
ARCH_CFLAGS = -nologo -D_X86_=1 -c -Zel -W2 -H63 -Oxsb2 -Oy- -G6dF -Zp8 $(DEBUG_FLAG)
!endif
ARCH_LDFLAGS = $(SYS_LDFLAGS)
!else
!if "$(ARCH)" == "mips"
ARCH_CFLAGS = -D_MIPS_=1 -c -W2 -Zi -Od -Gt0
ARCH_LDFLAGS = $(SYS_LDFLAGS)
!else
!if "$(ARCH)" == "alpha"
!if "$(BUILD_TYPE)" == "spd"
ARCH_CFLAGS = -D_ALPHA_=1 -c -Ze -Zi -W2 -Od -D__stdcall= -D__cdecl=
!else
ARCH_CFLAGS = -D_ALPHA_=1 -c -Ze -Zi -W2 -O1 -D__stdcall= -D__cdecl=
!endif
ARCH_LDFLAGS = $(SYS_LDFLAGS)
!else
!if "$(ARCH)" == "ppc"
# These flags are a guess...if they don't work, please send me mail.
ARCH_CFLAGS = -D_PPC_=1 -c -Ze -Zi -W2 -Od
ARCH_LDFLAGS = $(SYS_LDFLAGS)
!else
!ERROR Unknown architecture type "$(ARCH)".
!endif
!endif
!endif
!endif
LINK_FLAGS = $(ARCH_LDFLAGS) $(DEBUG_LINK) $(USER_LDFLAGS)
# From MSVC 5.0 onwards, it seem base relocation information is not included,
# at least in release builds. We need to ensure the reloc info is included
# in order to use the MSVC profiler.
!IF ("$(_NMAKE_VER)" == "$(_NMAKE_VER_4)")
EXTRA_LINK =
!ELSE
EXTRA_LINK = -profile
!ENDIF
#
# If the compiler supports compiling multiple .c files to .o files at
# one time, use this feature.
#
!IF ("$(_NMAKE_VER)" == "$(_NMAKE_VER_4)")
.c{$(BLD)}.obj:
$(CC) $(CFLAGS) -Fo$(BLD)\ $<
!ELSE
.c{$(BLD)}.obj::
$(CC) $(CFLAGS) -Fo$(BLD)\ $<
!ENDIF
# arch-tag: fefa49b0-c23c-46c7-9094-cab2a405058e