@c -*-texinfo-*-
@c This is part of the GNU Emacs Lisp Reference Manual.
@c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999, 2001,
@c 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
@c See the file elisp.texi for copying conditions.
@setfilename ../info/markers
@node Markers, Text, Positions, Top
@chapter Markers
@cindex markers
A @dfn{marker} is a Lisp object used to specify a position in a buffer
relative to the surrounding text. A marker changes its offset from the
beginning of the buffer automatically whenever text is inserted or
deleted, so that it stays with the two characters on either side of it.
@menu
* Overview of Markers:: The components of a marker, and how it relocates.
* Predicates on Markers:: Testing whether an object is a marker.
* Creating Markers:: Making empty markers or markers at certain places.
* Information from Markers:: Finding the marker's buffer or character position.
* Marker Insertion Types:: Two ways a marker can relocate when you
insert where it points.
* Moving Markers:: Moving the marker to a new buffer or position.
* The Mark:: How "the mark" is implemented with a marker.
* The Region:: How to access "the region".
@end menu
@node Overview of Markers
@section Overview of Markers
A marker specifies a buffer and a position in that buffer. The
marker can be used to represent a position in the functions that
require one, just as an integer could be used. In that case, the
marker's buffer is normally ignored. Of course, a marker used in this
way usually points to a position in the buffer that the function
operates on, but that is entirely the programmer's responsibility.
@xref{Positions}, for a complete description of positions.
A marker has three attributes: the marker position, the marker
buffer, and the insertion type. The marker position is an integer
that is equivalent (at a given time) to the marker as a position in
that buffer. But the marker's position value can change often during
the life of the marker. Insertion and deletion of text in the buffer
relocate the marker. The idea is that a marker positioned between two
characters remains between those two characters despite insertion and
deletion elsewhere in the buffer. Relocation changes the integer
equivalent of the marker.
@cindex marker relocation
Deleting text around a marker's position leaves the marker between the
characters immediately before and after the deleted text. Inserting
text at the position of a marker normally leaves the marker either in
front of or after the new text, depending on the marker's @dfn{insertion
type} (@pxref{Marker Insertion Types})---unless the insertion is done
with @code{insert-before-markers} (@pxref{Insertion}).
@cindex marker garbage collection
Insertion and deletion in a buffer must check all the markers and
relocate them if necessary. This slows processing in a buffer with a
large number of markers. For this reason, it is a good idea to make a
marker point nowhere if you are sure you don't need it any more.
Unreferenced markers are garbage collected eventually, but until then
will continue to use time if they do point somewhere.
@cindex markers as numbers
Because it is common to perform arithmetic operations on a marker
position, most of the arithmetic operations (including @code{+} and
@code{-}) accept markers as arguments. In such cases, the marker
stands for its current position.
Here are examples of creating markers, setting markers, and moving point
to markers:
@example
@group
;; @r{Make a new marker that initially does not point anywhere:}
(setq m1 (make-marker))
@result{} #<marker in no buffer>
@end group
@group
;; @r{Set @code{m1} to point between the 99th and 100th characters}
;; @r{in the current buffer:}
(set-marker m1 100)
@result{} #<marker at 100 in markers.texi>
@end group
@group
;; @r{Now insert one character at the beginning of the buffer:}
(goto-char (point-min))
@result{} 1
(insert "Q")
@result{} nil
@end group
@group
;; @r{@code{m1} is updated appropriately.}
m1
@result{} #<marker at 101 in markers.texi>
@end group
@group
;; @r{Two markers that point to the same position}
;; @r{are not @code{eq}, but they are @code{equal}.}
(setq m2 (copy-marker m1))
@result{} #<marker at 101 in markers.texi>
(eq m1 m2)
@result{} nil
(equal m1 m2)
@result{} t
@end group
@group
;; @r{When you are finished using a marker, make it point nowhere.}
(set-marker m1 nil)
@result{} #<marker in no buffer>
@end group
@end example
@node Predicates on Markers
@section Predicates on Markers
You can test an object to see whether it is a marker, or whether it is
either an integer or a marker. The latter test is useful in connection
with the arithmetic functions that work with both markers and integers.
@defun markerp object
This function returns @code{t} if @var{object} is a marker, @code{nil}
otherwise. Note that integers are not markers, even though many
functions will accept either a marker or an integer.
@end defun
@defun integer-or-marker-p object
This function returns @code{t} if @var{object} is an integer or a marker,
@code{nil} otherwise.
@end defun
@defun number-or-marker-p object
This function returns @code{t} if @var{object} is a number (either
integer or floating point) or a marker, @code{nil} otherwise.
@end defun
@node Creating Markers
@section Functions that Create Markers
When you create a new marker, you can make it point nowhere, or point
to the present position of point, or to the beginning or end of the
accessible portion of the buffer, or to the same place as another given
marker.
The next four functions all return markers with insertion type
@code{nil}. @xref{Marker Insertion Types}.
@defun make-marker
This function returns a newly created marker that does not point
anywhere.
@example
@group
(make-marker)
@result{} #<marker in no buffer>
@end group
@end example
@end defun
@defun point-marker
This function returns a new marker that points to the present position
of point in the current buffer. @xref{Point}. For an example, see
@code{copy-marker}, below.
@end defun
@defun point-min-marker
This function returns a new marker that points to the beginning of the
accessible portion of the buffer. This will be the beginning of the
buffer unless narrowing is in effect. @xref{Narrowing}.
@end defun
@defun point-max-marker
This function returns a new marker that points to the end of the
accessible portion of the buffer. This will be the end of the buffer
unless narrowing is in effect. @xref{Narrowing}.
Here are examples of this function and @code{point-min-marker}, shown in
a buffer containing a version of the source file for the text of this
chapter.
@example
@group
(point-min-marker)
@result{} #<marker at 1 in markers.texi>
(point-max-marker)
@result{} #<marker at 15573 in markers.texi>
@end group
@group
(narrow-to-region 100 200)
@result{} nil
@end group
@group
(point-min-marker)
@result{} #<marker at 100 in markers.texi>
@end group
@group
(point-max-marker)
@result{} #<marker at 200 in markers.texi>
@end group
@end example
@end defun
@defun copy-marker marker-or-integer &optional insertion-type
If passed a marker as its argument, @code{copy-marker} returns a
new marker that points to the same place and the same buffer as does
@var{marker-or-integer}. If passed an integer as its argument,
@code{copy-marker} returns a new marker that points to position
@var{marker-or-integer} in the current buffer.
The new marker's insertion type is specified by the argument
@var{insertion-type}. @xref{Marker Insertion Types}.
If passed an integer argument less than 1, @code{copy-marker} returns a
new marker that points to the beginning of the current buffer. If
passed an integer argument greater than the length of the buffer,
@code{copy-marker} returns a new marker that points to the end of the
buffer.
@example
@group
(copy-marker 0)
@result{} #<marker at 1 in markers.texi>
@end group
@group
(copy-marker 20000)
@result{} #<marker at 7572 in markers.texi>
@end group
@end example
An error is signaled if @var{marker} is neither a marker nor an
integer.
@end defun
Two distinct markers are considered @code{equal} (even though not
@code{eq}) to each other if they have the same position and buffer, or
if they both point nowhere.
@example
@group
(setq p (point-marker))
@result{} #<marker at 2139 in markers.texi>
@end group
@group
(setq q (copy-marker p))
@result{} #<marker at 2139 in markers.texi>
@end group
@group
(eq p q)
@result{} nil
@end group
@group
(equal p q)
@result{} t
@end group
@end example
@node Information from Markers
@section Information from Markers
This section describes the functions for accessing the components of a
marker object.
@defun marker-position marker
This function returns the position that @var{marker} points to, or
@code{nil} if it points nowhere.
@end defun
@defun marker-buffer marker
This function returns the buffer that @var{marker} points into, or
@code{nil} if it points nowhere.
@example
@group
(setq m (make-marker))
@result{} #<marker in no buffer>
@end group
@group
(marker-position m)
@result{} nil
@end group
@group
(marker-buffer m)
@result{} nil
@end group
@group
(set-marker m 3770 (current-buffer))
@result{} #<marker at 3770 in markers.texi>
@end group
@group
(marker-buffer m)
@result{} #<buffer markers.texi>
@end group
@group
(marker-position m)
@result{} 3770
@end group
@end example
@end defun
@defun buffer-has-markers-at position
This function returns @code{t} if one or more markers
point at position @var{position} in the current buffer.
@end defun
@node Marker Insertion Types
@section Marker Insertion Types
@cindex insertion type of a marker
When you insert text directly at the place where a marker points,
there are two possible ways to relocate that marker: it can point before
the inserted text, or point after it. You can specify which one a given
marker should do by setting its @dfn{insertion type}. Note that use of
@code{insert-before-markers} ignores markers' insertion types, always
relocating a marker to point after the inserted text.
@defun set-marker-insertion-type marker type
This function sets the insertion type of marker @var{marker} to
@var{type}. If @var{type} is @code{t}, @var{marker} will advance when
text is inserted at its position. If @var{type} is @code{nil},
@var{marker} does not advance when text is inserted there.
@end defun
@defun marker-insertion-type marker
This function reports the current insertion type of @var{marker}.
@end defun
Most functions that create markers, without an argument allowing to
specify the insertion type, create them with insertion type
@code{nil}. Also, the mark has, by default, insertion type
@code{nil}.
@node Moving Markers
@section Moving Marker Positions
This section describes how to change the position of an existing
marker. When you do this, be sure you know whether the marker is used
outside of your program, and, if so, what effects will result from
moving it---otherwise, confusing things may happen in other parts of
Emacs.
@defun set-marker marker position &optional buffer
This function moves @var{marker} to @var{position}
in @var{buffer}. If @var{buffer} is not provided, it defaults to
the current buffer.
If @var{position} is less than 1, @code{set-marker} moves @var{marker}
to the beginning of the buffer. If @var{position} is greater than the
size of the buffer, @code{set-marker} moves marker to the end of the
buffer. If @var{position} is @code{nil} or a marker that points
nowhere, then @var{marker} is set to point nowhere.
The value returned is @var{marker}.
@example
@group
(setq m (point-marker))
@result{} #<marker at 4714 in markers.texi>
@end group
@group
(set-marker m 55)
@result{} #<marker at 55 in markers.texi>
@end group
@group
(setq b (get-buffer "foo"))
@result{} #<buffer foo>
@end group
@group
(set-marker m 0 b)
@result{} #<marker at 1 in foo>
@end group
@end example
@end defun
@defun move-marker marker position &optional buffer
This is another name for @code{set-marker}.
@end defun
@node The Mark
@section The Mark
@cindex mark, the
@cindex mark ring
One special marker in each buffer is designated @dfn{the mark}. It
specifies a position to bound a range of text for commands such as
@code{kill-region} and @code{indent-rigidly}. Lisp programs should
set the mark only to values that have a potential use to the user, and
never for their own internal purposes. For example, the
@code{replace-regexp} command sets the mark to the value of point
before doing any replacements, because this enables the user to move
back there conveniently after the replace is finished.
Many commands are designed to operate on the text between point and
the mark when called interactively. If you are writing such a
command, don't examine the mark directly; instead, use
@code{interactive} with the @samp{r} specification. This provides the
values of point and the mark as arguments to the command in an
interactive call, but permits other Lisp programs to specify arguments
explicitly. @xref{Interactive Codes}.
Each buffer has a marker which represents the value of the mark in
that buffer, independent of any other buffer. When a buffer is newly
created, this marker exists but does not point anywhere. That means
the mark ``doesn't exist'' in that buffer as yet.
Once the mark ``exists'' in a buffer, it normally never ceases to
exist. However, it may become @dfn{inactive}, if Transient Mark mode is
enabled. The variable @code{mark-active}, which is always buffer-local
in all buffers, indicates whether the mark is active: non-@code{nil}
means yes. A command can request deactivation of the mark upon return
to the editor command loop by setting @code{deactivate-mark} to a
non-@code{nil} value (but this causes deactivation only if Transient
Mark mode is enabled).
The main motivation for using Transient Mark mode is that this mode
also enables highlighting of the region when the mark is active.
@xref{Display}.
In addition to the mark, each buffer has a @dfn{mark ring} which is a
list of markers containing previous values of the mark. When editing
commands change the mark, they should normally save the old value of the
mark on the mark ring. The variable @code{mark-ring-max} specifies the
maximum number of entries in the mark ring; once the list becomes this
long, adding a new element deletes the last element.
There is also a separate global mark ring, but that is used only in a
few particular user-level commands, and is not relevant to Lisp
programming. So we do not describe it here.
@defun mark &optional force
@cindex current buffer mark
This function returns the current buffer's mark position as an integer,
or @code{nil} if no mark has ever been set in this buffer.
If Transient Mark mode is enabled, and @code{mark-even-if-inactive} is
@code{nil}, @code{mark} signals an error if the mark is inactive.
However, if @var{force} is non-@code{nil}, then @code{mark} disregards
inactivity of the mark, and returns the mark position anyway (or
@code{nil}).
@end defun
@defun mark-marker
This function returns the marker that represents the current buffer's
mark. It is not a copy, it is the marker used internally. Therefore,
changing this marker's position will directly affect the buffer's
mark. Don't do that unless that is the effect you want.
@example
@group
(setq m (mark-marker))
@result{} #<marker at 3420 in markers.texi>
@end group
@group
(set-marker m 100)
@result{} #<marker at 100 in markers.texi>
@end group
@group
(mark-marker)
@result{} #<marker at 100 in markers.texi>
@end group
@end example
Like any marker, this marker can be set to point at any buffer you
like. If you make it point at any buffer other than the one of which
it is the mark, it will yield perfectly consistent, but rather odd,
results. We recommend that you not do it!
@end defun
@ignore
@deffn Command set-mark-command jump
If @var{jump} is @code{nil}, this command sets the mark to the value
of point and pushes the previous value of the mark on the mark ring. The
message @samp{Mark set} is also displayed in the echo area.
If @var{jump} is not @code{nil}, this command sets point to the value
of the mark, and sets the mark to the previous saved mark value, which
is popped off the mark ring.
This function is @emph{only} intended for interactive use.
@end deffn
@end ignore
@defun set-mark position
This function sets the mark to @var{position}, and activates the mark.
The old value of the mark is @emph{not} pushed onto the mark ring.
@strong{Please note:} Use this function only if you want the user to
see that the mark has moved, and you want the previous mark position to
be lost. Normally, when a new mark is set, the old one should go on the
@code{mark-ring}. For this reason, most applications should use
@code{push-mark} and @code{pop-mark}, not @code{set-mark}.
Novice Emacs Lisp programmers often try to use the mark for the wrong
purposes. The mark saves a location for the user's convenience. An
editing command should not alter the mark unless altering the mark is
part of the user-level functionality of the command. (And, in that
case, this effect should be documented.) To remember a location for
internal use in the Lisp program, store it in a Lisp variable. For
example:
@example
@group
(let ((beg (point)))
(forward-line 1)
(delete-region beg (point))).
@end group
@end example
@end defun
@c for interactive use only
@ignore
@deffn Command exchange-point-and-mark
This function exchanges the positions of point and the mark.
It is intended for interactive use.
@end deffn
@end ignore
@defun push-mark &optional position nomsg activate
This function sets the current buffer's mark to @var{position}, and
pushes a copy of the previous mark onto @code{mark-ring}. If
@var{position} is @code{nil}, then the value of point is used.
@code{push-mark} returns @code{nil}.
The function @code{push-mark} normally @emph{does not} activate the
mark. To do that, specify @code{t} for the argument @var{activate}.
A @samp{Mark set} message is displayed unless @var{nomsg} is
non-@code{nil}.
@end defun
@defun pop-mark
This function pops off the top element of @code{mark-ring} and makes
that mark become the buffer's actual mark. This does not move point in
the buffer, and it does nothing if @code{mark-ring} is empty. It
deactivates the mark.
The return value is not meaningful.
@end defun
@defopt transient-mark-mode
@c @cindex Transient Mark mode Redundant
This variable if non-@code{nil} enables Transient Mark mode, in which
every buffer-modifying primitive sets @code{deactivate-mark}. The
consequence of this is that commands that modify the buffer normally
make the mark inactive.
Lisp programs can set @code{transient-mark-mode} to @code{only} to
enable Transient Mark mode for the following command only. During
that following command, the value of @code{transient-mark-mode} is
@code{identity}. If it is still @code{identity} at the end of the
command, it changes to @code{nil}.
@end defopt
@defopt mark-even-if-inactive
If this is non-@code{nil}, Lisp programs and the Emacs user can use the
mark even when it is inactive. This option affects the behavior of
Transient Mark mode. When the option is non-@code{nil}, deactivation of
the mark turns off region highlighting, but commands that use the mark
behave as if the mark were still active.
@end defopt
@defvar deactivate-mark
If an editor command sets this variable non-@code{nil}, then the editor
command loop deactivates the mark after the command returns (if
Transient Mark mode is enabled). All the primitives that change the
buffer set @code{deactivate-mark}, to deactivate the mark when the
command is finished.
To write Lisp code that modifies the buffer without causing
deactivation of the mark at the end of the command, bind
@code{deactivate-mark} to @code{nil} around the code that does the
modification. For example:
@example
(let (deactivate-mark)
(insert " "))
@end example
@end defvar
@defun deactivate-mark
This function deactivates the mark, if Transient Mark mode is enabled.
Otherwise it does nothing.
@end defun
@defvar mark-active
The mark is active when this variable is non-@code{nil}. This variable
is always buffer-local in each buffer.
@end defvar
@defvar activate-mark-hook
@defvarx deactivate-mark-hook
These normal hooks are run, respectively, when the mark becomes active
and when it becomes inactive. The hook @code{activate-mark-hook} is
also run at the end of a command if the mark is active and it is
possible that the region may have changed.
@end defvar
@defvar mark-ring
The value of this buffer-local variable is the list of saved former
marks of the current buffer, most recent first.
@example
@group
mark-ring
@result{} (#<marker at 11050 in markers.texi>
#<marker at 10832 in markers.texi>
@dots{})
@end group
@end example
@end defvar
@defopt mark-ring-max
The value of this variable is the maximum size of @code{mark-ring}. If
more marks than this are pushed onto the @code{mark-ring},
@code{push-mark} discards an old mark when it adds a new one.
@end defopt
@node The Region
@section The Region
@cindex region (between point and mark)
The text between point and the mark is known as @dfn{the region}.
Various functions operate on text delimited by point and the mark, but
only those functions specifically related to the region itself are
described here.
The next two functions signal an error if the mark does not point
anywhere. If Transient Mark mode is enabled and
@code{mark-even-if-inactive} is @code{nil}, they also signal an error
if the mark is inactive.
@defun region-beginning
This function returns the position of the beginning of the region (as
an integer). This is the position of either point or the mark,
whichever is smaller.
@end defun
@defun region-end
This function returns the position of the end of the region (as an
integer). This is the position of either point or the mark, whichever is
larger.
@end defun
Few programs need to use the @code{region-beginning} and
@code{region-end} functions. A command designed to operate on a region
should normally use @code{interactive} with the @samp{r} specification
to find the beginning and end of the region. This lets other Lisp
programs specify the bounds explicitly as arguments. (@xref{Interactive
Codes}.)
@ignore
arch-tag: b1ba2e7a-a0f3-4c5e-875c-7d8e22d73299
@end ignore