@c -*-texinfo-*-
@c This is part of the GNU Emacs Lisp Reference Manual.
@c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999, 2001, 2002,
@c 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
@c See the file elisp.texi for copying conditions.
@setfilename ../info/commands
@node Command Loop, Keymaps, Minibuffers, Top
@chapter Command Loop
@cindex editor command loop
@cindex command loop
When you run Emacs, it enters the @dfn{editor command loop} almost
immediately. This loop reads key sequences, executes their definitions,
and displays the results. In this chapter, we describe how these things
are done, and the subroutines that allow Lisp programs to do them.
@menu
* Command Overview:: How the command loop reads commands.
* Defining Commands:: Specifying how a function should read arguments.
* Interactive Call:: Calling a command, so that it will read arguments.
* Command Loop Info:: Variables set by the command loop for you to examine.
* Adjusting Point:: Adjustment of point after a command.
* Input Events:: What input looks like when you read it.
* Reading Input:: How to read input events from the keyboard or mouse.
* Special Events:: Events processed immediately and individually.
* Waiting:: Waiting for user input or elapsed time.
* Quitting:: How @kbd{C-g} works. How to catch or defer quitting.
* Prefix Command Arguments:: How the commands to set prefix args work.
* Recursive Editing:: Entering a recursive edit,
and why you usually shouldn't.
* Disabling Commands:: How the command loop handles disabled commands.
* Command History:: How the command history is set up, and how accessed.
* Keyboard Macros:: How keyboard macros are implemented.
@end menu
@node Command Overview
@section Command Loop Overview
The first thing the command loop must do is read a key sequence, which
is a sequence of events that translates into a command. It does this by
calling the function @code{read-key-sequence}. Your Lisp code can also
call this function (@pxref{Key Sequence Input}). Lisp programs can also
do input at a lower level with @code{read-event} (@pxref{Reading One
Event}) or discard pending input with @code{discard-input}
(@pxref{Event Input Misc}).
The key sequence is translated into a command through the currently
active keymaps. @xref{Key Lookup}, for information on how this is done.
The result should be a keyboard macro or an interactively callable
function. If the key is @kbd{M-x}, then it reads the name of another
command, which it then calls. This is done by the command
@code{execute-extended-command} (@pxref{Interactive Call}).
To execute a command requires first reading the arguments for it.
This is done by calling @code{command-execute} (@pxref{Interactive
Call}). For commands written in Lisp, the @code{interactive}
specification says how to read the arguments. This may use the prefix
argument (@pxref{Prefix Command Arguments}) or may read with prompting
in the minibuffer (@pxref{Minibuffers}). For example, the command
@code{find-file} has an @code{interactive} specification which says to
read a file name using the minibuffer. The command's function body does
not use the minibuffer; if you call this command from Lisp code as a
function, you must supply the file name string as an ordinary Lisp
function argument.
If the command is a string or vector (i.e., a keyboard macro) then
@code{execute-kbd-macro} is used to execute it. You can call this
function yourself (@pxref{Keyboard Macros}).
To terminate the execution of a running command, type @kbd{C-g}. This
character causes @dfn{quitting} (@pxref{Quitting}).
@defvar pre-command-hook
The editor command loop runs this normal hook before each command. At
that time, @code{this-command} contains the command that is about to
run, and @code{last-command} describes the previous command.
@xref{Command Loop Info}.
@end defvar
@defvar post-command-hook
The editor command loop runs this normal hook after each command
(including commands terminated prematurely by quitting or by errors),
and also when the command loop is first entered. At that time,
@code{this-command} refers to the command that just ran, and
@code{last-command} refers to the command before that.
@end defvar
Quitting is suppressed while running @code{pre-command-hook} and
@code{post-command-hook}. If an error happens while executing one of
these hooks, it terminates execution of the hook, and clears the hook
variable to @code{nil} so as to prevent an infinite loop of errors.
A request coming into the Emacs server (@pxref{Emacs Server,,,
emacs, The GNU Emacs Manual}) runs these two hooks just as a keyboard
command does.
@node Defining Commands
@section Defining Commands
@cindex defining commands
@cindex commands, defining
@cindex functions, making them interactive
@cindex interactive function
A Lisp function becomes a command when its body contains, at top
level, a form that calls the special form @code{interactive}. This
form does nothing when actually executed, but its presence serves as a
flag to indicate that interactive calling is permitted. Its argument
controls the reading of arguments for an interactive call.
@menu
* Using Interactive:: General rules for @code{interactive}.
* Interactive Codes:: The standard letter-codes for reading arguments
in various ways.
* Interactive Examples:: Examples of how to read interactive arguments.
@end menu
@node Using Interactive
@subsection Using @code{interactive}
@cindex arguments, interactive entry
This section describes how to write the @code{interactive} form that
makes a Lisp function an interactively-callable command, and how to
examine a command's @code{interactive} form.
@defspec interactive arg-descriptor
This special form declares that the function in which it appears is a
command, and that it may therefore be called interactively (via
@kbd{M-x} or by entering a key sequence bound to it). The argument
@var{arg-descriptor} declares how to compute the arguments to the
command when the command is called interactively.
A command may be called from Lisp programs like any other function, but
then the caller supplies the arguments and @var{arg-descriptor} has no
effect.
The @code{interactive} form has its effect because the command loop
(actually, its subroutine @code{call-interactively}) scans through the
function definition looking for it, before calling the function. Once
the function is called, all its body forms including the
@code{interactive} form are executed, but at this time
@code{interactive} simply returns @code{nil} without even evaluating its
argument.
@end defspec
There are three possibilities for the argument @var{arg-descriptor}:
@itemize @bullet
@item
It may be omitted or @code{nil}; then the command is called with no
arguments. This leads quickly to an error if the command requires one
or more arguments.
@item
It may be a string; then its contents should consist of a code character
followed by a prompt (which some code characters use and some ignore).
The prompt ends either with the end of the string or with a newline.
Here is a simple example:
@smallexample
(interactive "bFrobnicate buffer: ")
@end smallexample
@noindent
The code letter @samp{b} says to read the name of an existing buffer,
with completion. The buffer name is the sole argument passed to the
command. The rest of the string is a prompt.
If there is a newline character in the string, it terminates the prompt.
If the string does not end there, then the rest of the string should
contain another code character and prompt, specifying another argument.
You can specify any number of arguments in this way.
@c Emacs 19 feature
The prompt string can use @samp{%} to include previous argument values
(starting with the first argument) in the prompt. This is done using
@code{format} (@pxref{Formatting Strings}). For example, here is how
you could read the name of an existing buffer followed by a new name to
give to that buffer:
@smallexample
@group
(interactive "bBuffer to rename: \nsRename buffer %s to: ")
@end group
@end smallexample
@cindex @samp{*} in @code{interactive}
@cindex read-only buffers in interactive
If the first character in the string is @samp{*}, then an error is
signaled if the buffer is read-only.
@cindex @samp{@@} in @code{interactive}
@c Emacs 19 feature
If the first character in the string is @samp{@@}, and if the key
sequence used to invoke the command includes any mouse events, then
the window associated with the first of those events is selected
before the command is run.
You can use @samp{*} and @samp{@@} together; the order does not matter.
Actual reading of arguments is controlled by the rest of the prompt
string (starting with the first character that is not @samp{*} or
@samp{@@}).
@item
It may be a Lisp expression that is not a string; then it should be a
form that is evaluated to get a list of arguments to pass to the
command. Usually this form will call various functions to read input
from the user, most often through the minibuffer (@pxref{Minibuffers})
or directly from the keyboard (@pxref{Reading Input}).
Providing point or the mark as an argument value is also common, but
if you do this @emph{and} read input (whether using the minibuffer or
not), be sure to get the integer values of point or the mark after
reading. The current buffer may be receiving subprocess output; if
subprocess output arrives while the command is waiting for input, it
could relocate point and the mark.
Here's an example of what @emph{not} to do:
@smallexample
(interactive
(list (region-beginning) (region-end)
(read-string "Foo: " nil 'my-history)))
@end smallexample
@noindent
Here's how to avoid the problem, by examining point and the mark after
reading the keyboard input:
@smallexample
(interactive
(let ((string (read-string "Foo: " nil 'my-history)))
(list (region-beginning) (region-end) string)))
@end smallexample
@strong{Warning:} the argument values should not include any data
types that can't be printed and then read. Some facilities save
@code{command-history} in a file to be read in the subsequent
sessions; if a command's arguments contain a data type that prints
using @samp{#<@dots{}>} syntax, those facilities won't work.
There are, however, a few exceptions: it is ok to use a limited set of
expressions such as @code{(point)}, @code{(mark)},
@code{(region-beginning)}, and @code{(region-end)}, because Emacs
recognizes them specially and puts the expression (rather than its
value) into the command history. To see whether the expression you
wrote is one of these exceptions, run the command, then examine
@code{(car command-history)}.
@end itemize
@cindex examining the @code{interactive} form
@defun interactive-form function
This function returns the @code{interactive} form of @var{function}.
If @var{function} is an interactively callable function
(@pxref{Interactive Call}), the value is the command's
@code{interactive} form @code{(interactive @var{spec})}, which
specifies how to compute its arguments. Otherwise, the value is
@code{nil}. If @var{function} is a symbol, its function definition is
used.
@end defun
@node Interactive Codes
@comment node-name, next, previous, up
@subsection Code Characters for @code{interactive}
@cindex interactive code description
@cindex description for interactive codes
@cindex codes, interactive, description of
@cindex characters for interactive codes
The code character descriptions below contain a number of key words,
defined here as follows:
@table @b
@item Completion
@cindex interactive completion
Provide completion. @key{TAB}, @key{SPC}, and @key{RET} perform name
completion because the argument is read using @code{completing-read}
(@pxref{Completion}). @kbd{?} displays a list of possible completions.
@item Existing
Require the name of an existing object. An invalid name is not
accepted; the commands to exit the minibuffer do not exit if the current
input is not valid.
@item Default
@cindex default argument string
A default value of some sort is used if the user enters no text in the
minibuffer. The default depends on the code character.
@item No I/O
This code letter computes an argument without reading any input.
Therefore, it does not use a prompt string, and any prompt string you
supply is ignored.
Even though the code letter doesn't use a prompt string, you must follow
it with a newline if it is not the last code character in the string.
@item Prompt
A prompt immediately follows the code character. The prompt ends either
with the end of the string or with a newline.
@item Special
This code character is meaningful only at the beginning of the
interactive string, and it does not look for a prompt or a newline.
It is a single, isolated character.
@end table
@cindex reading interactive arguments
Here are the code character descriptions for use with @code{interactive}:
@table @samp
@item *
Signal an error if the current buffer is read-only. Special.
@item @@
Select the window mentioned in the first mouse event in the key
sequence that invoked this command. Special.
@item a
A function name (i.e., a symbol satisfying @code{fboundp}). Existing,
Completion, Prompt.
@item b
The name of an existing buffer. By default, uses the name of the
current buffer (@pxref{Buffers}). Existing, Completion, Default,
Prompt.
@item B
A buffer name. The buffer need not exist. By default, uses the name of
a recently used buffer other than the current buffer. Completion,
Default, Prompt.
@item c
A character. The cursor does not move into the echo area. Prompt.
@item C
A command name (i.e., a symbol satisfying @code{commandp}). Existing,
Completion, Prompt.
@item d
@cindex position argument
The position of point, as an integer (@pxref{Point}). No I/O.
@item D
A directory name. The default is the current default directory of the
current buffer, @code{default-directory} (@pxref{File Name Expansion}).
Existing, Completion, Default, Prompt.
@item e
The first or next mouse event in the key sequence that invoked the command.
More precisely, @samp{e} gets events that are lists, so you can look at
the data in the lists. @xref{Input Events}. No I/O.
You can use @samp{e} more than once in a single command's interactive
specification. If the key sequence that invoked the command has
@var{n} events that are lists, the @var{n}th @samp{e} provides the
@var{n}th such event. Events that are not lists, such as function keys
and @acronym{ASCII} characters, do not count where @samp{e} is concerned.
@item f
A file name of an existing file (@pxref{File Names}). The default
directory is @code{default-directory}. Existing, Completion, Default,
Prompt.
@item F
A file name. The file need not exist. Completion, Default, Prompt.
@item G
A file name. The file need not exist. If the user enters just a
directory name, then the value is just that directory name, with no
file name within the directory added. Completion, Default, Prompt.
@item i
An irrelevant argument. This code always supplies @code{nil} as
the argument's value. No I/O.
@item k
A key sequence (@pxref{Key Sequences}). This keeps reading events
until a command (or undefined command) is found in the current key
maps. The key sequence argument is represented as a string or vector.
The cursor does not move into the echo area. Prompt.
If @samp{k} reads a key sequence that ends with a down-event, it also
reads and discards the following up-event. You can get access to that
up-event with the @samp{U} code character.
This kind of input is used by commands such as @code{describe-key} and
@code{global-set-key}.
@item K
A key sequence, whose definition you intend to change. This works like
@samp{k}, except that it suppresses, for the last input event in the key
sequence, the conversions that are normally used (when necessary) to
convert an undefined key into a defined one.
@item m
@cindex marker argument
The position of the mark, as an integer. No I/O.
@item M
Arbitrary text, read in the minibuffer using the current buffer's input
method, and returned as a string (@pxref{Input Methods,,, emacs, The GNU
Emacs Manual}). Prompt.
@item n
A number, read with the minibuffer. If the input is not a number, the
user has to try again. @samp{n} never uses the prefix argument.
Prompt.
@item N
The numeric prefix argument; but if there is no prefix argument, read
a number as with @kbd{n}. The value is always a number. @xref{Prefix
Command Arguments}. Prompt.
@item p
@cindex numeric prefix argument usage
The numeric prefix argument. (Note that this @samp{p} is lower case.)
No I/O.
@item P
@cindex raw prefix argument usage
The raw prefix argument. (Note that this @samp{P} is upper case.) No
I/O.
@item r
@cindex region argument
Point and the mark, as two numeric arguments, smallest first. This is
the only code letter that specifies two successive arguments rather than
one. No I/O.
@item s
Arbitrary text, read in the minibuffer and returned as a string
(@pxref{Text from Minibuffer}). Terminate the input with either
@kbd{C-j} or @key{RET}. (@kbd{C-q} may be used to include either of
these characters in the input.) Prompt.
@item S
An interned symbol whose name is read in the minibuffer. Any whitespace
character terminates the input. (Use @kbd{C-q} to include whitespace in
the string.) Other characters that normally terminate a symbol (e.g.,
parentheses and brackets) do not do so here. Prompt.
@item U
A key sequence or @code{nil}. Can be used after a @samp{k} or
@samp{K} argument to get the up-event that was discarded (if any)
after @samp{k} or @samp{K} read a down-event. If no up-event has been
discarded, @samp{U} provides @code{nil} as the argument. No I/O.
@item v
A variable declared to be a user option (i.e., satisfying the
predicate @code{user-variable-p}). This reads the variable using
@code{read-variable}. @xref{Definition of read-variable}. Existing,
Completion, Prompt.
@item x
A Lisp object, specified with its read syntax, terminated with a
@kbd{C-j} or @key{RET}. The object is not evaluated. @xref{Object from
Minibuffer}. Prompt.
@item X
@cindex evaluated expression argument
A Lisp form's value. @samp{X} reads as @samp{x} does, then evaluates
the form so that its value becomes the argument for the command.
Prompt.
@item z
A coding system name (a symbol). If the user enters null input, the
argument value is @code{nil}. @xref{Coding Systems}. Completion,
Existing, Prompt.
@item Z
A coding system name (a symbol)---but only if this command has a prefix
argument. With no prefix argument, @samp{Z} provides @code{nil} as the
argument value. Completion, Existing, Prompt.
@end table
@node Interactive Examples
@comment node-name, next, previous, up
@subsection Examples of Using @code{interactive}
@cindex examples of using @code{interactive}
@cindex @code{interactive}, examples of using
Here are some examples of @code{interactive}:
@example
@group
(defun foo1 () ; @r{@code{foo1} takes no arguments,}
(interactive) ; @r{just moves forward two words.}
(forward-word 2))
@result{} foo1
@end group
@group
(defun foo2 (n) ; @r{@code{foo2} takes one argument,}
(interactive "p") ; @r{which is the numeric prefix.}
(forward-word (* 2 n)))
@result{} foo2
@end group
@group
(defun foo3 (n) ; @r{@code{foo3} takes one argument,}
(interactive "nCount:") ; @r{which is read with the Minibuffer.}
(forward-word (* 2 n)))
@result{} foo3
@end group
@group
(defun three-b (b1 b2 b3)
"Select three existing buffers.
Put them into three windows, selecting the last one."
@end group
(interactive "bBuffer1:\nbBuffer2:\nbBuffer3:")
(delete-other-windows)
(split-window (selected-window) 8)
(switch-to-buffer b1)
(other-window 1)
(split-window (selected-window) 8)
(switch-to-buffer b2)
(other-window 1)
(switch-to-buffer b3))
@result{} three-b
@group
(three-b "*scratch*" "declarations.texi" "*mail*")
@result{} nil
@end group
@end example
@node Interactive Call
@section Interactive Call
@cindex interactive call
After the command loop has translated a key sequence into a command it
invokes that command using the function @code{command-execute}. If the
command is a function, @code{command-execute} calls
@code{call-interactively}, which reads the arguments and calls the
command. You can also call these functions yourself.
@defun commandp object &optional for-call-interactively
Returns @code{t} if @var{object} is suitable for calling interactively;
that is, if @var{object} is a command. Otherwise, returns @code{nil}.
The interactively callable objects include strings and vectors (treated
as keyboard macros), lambda expressions that contain a top-level call to
@code{interactive}, byte-code function objects made from such lambda
expressions, autoload objects that are declared as interactive
(non-@code{nil} fourth argument to @code{autoload}), and some of the
primitive functions.
A symbol satisfies @code{commandp} if its function definition
satisfies @code{commandp}. Keys and keymaps are not commands.
Rather, they are used to look up commands (@pxref{Keymaps}).
If @var{for-call-interactively} is non-@code{nil}, then
@code{commandp} returns @code{t} only for objects that
@code{call-interactively} could call---thus, not for keyboard macros.
See @code{documentation} in @ref{Accessing Documentation}, for a
realistic example of using @code{commandp}.
@end defun
@defun call-interactively command &optional record-flag keys
This function calls the interactively callable function @var{command},
reading arguments according to its interactive calling specifications.
It returns whatever @var{command} returns. An error is signaled if
@var{command} is not a function or if it cannot be called
interactively (i.e., is not a command). Note that keyboard macros
(strings and vectors) are not accepted, even though they are
considered commands, because they are not functions. If @var{command}
is a symbol, then @code{call-interactively} uses its function definition.
@cindex record command history
If @var{record-flag} is non-@code{nil}, then this command and its
arguments are unconditionally added to the list @code{command-history}.
Otherwise, the command is added only if it uses the minibuffer to read
an argument. @xref{Command History}.
The argument @var{keys}, if given, should be a vector which specifies
the sequence of events to supply if the command inquires which events
were used to invoke it. If @var{keys} is omitted or @code{nil}, the
default is the return value of @code{this-command-keys-vector}.
@xref{Definition of this-command-keys-vector}.
@end defun
@defun command-execute command &optional record-flag keys special
@cindex keyboard macro execution
This function executes @var{command}. The argument @var{command} must
satisfy the @code{commandp} predicate; i.e., it must be an interactively
callable function or a keyboard macro.
A string or vector as @var{command} is executed with
@code{execute-kbd-macro}. A function is passed to
@code{call-interactively}, along with the optional @var{record-flag}
and @var{keys}.
A symbol is handled by using its function definition in its place. A
symbol with an @code{autoload} definition counts as a command if it was
declared to stand for an interactively callable function. Such a
definition is handled by loading the specified library and then
rechecking the definition of the symbol.
The argument @var{special}, if given, means to ignore the prefix
argument and not clear it. This is used for executing special events
(@pxref{Special Events}).
@end defun
@deffn Command execute-extended-command prefix-argument
@cindex read command name
This function reads a command name from the minibuffer using
@code{completing-read} (@pxref{Completion}). Then it uses
@code{command-execute} to call the specified command. Whatever that
command returns becomes the value of @code{execute-extended-command}.
@cindex execute with prefix argument
If the command asks for a prefix argument, it receives the value
@var{prefix-argument}. If @code{execute-extended-command} is called
interactively, the current raw prefix argument is used for
@var{prefix-argument}, and thus passed on to whatever command is run.
@c !!! Should this be @kindex?
@cindex @kbd{M-x}
@code{execute-extended-command} is the normal definition of @kbd{M-x},
so it uses the string @w{@samp{M-x }} as a prompt. (It would be better
to take the prompt from the events used to invoke
@code{execute-extended-command}, but that is painful to implement.) A
description of the value of the prefix argument, if any, also becomes
part of the prompt.
@example
@group
(execute-extended-command 3)
---------- Buffer: Minibuffer ----------
3 M-x forward-word RET
---------- Buffer: Minibuffer ----------
@result{} t
@end group
@end example
@end deffn
@defun interactive-p
This function returns @code{t} if the containing function (the one
whose code includes the call to @code{interactive-p}) was called in
direct response to user input. This means that it was called with the
function @code{call-interactively}, and that a keyboard macro is
not running, and that Emacs is not running in batch mode.
If the containing function was called by Lisp evaluation (or with
@code{apply} or @code{funcall}), then it was not called interactively.
@end defun
The most common use of @code{interactive-p} is for deciding whether
to give the user additional visual feedback (such as by printing an
informative message). For example:
@example
@group
;; @r{Here's the usual way to use @code{interactive-p}.}
(defun foo ()
(interactive)
(when (interactive-p)
(message "foo")))
@result{} foo
@end group
@group
;; @r{This function is just to illustrate the behavior.}
(defun bar ()
(interactive)
(setq foobar (list (foo) (interactive-p))))
@result{} bar
@end group
@group
;; @r{Type @kbd{M-x foo}.}
@print{} foo
@end group
@group
;; @r{Type @kbd{M-x bar}.}
;; @r{This does not display a message.}
@end group
@group
foobar
@result{} (nil t)
@end group
@end example
If you want to test @emph{only} whether the function was called
using @code{call-interactively}, add an optional argument
@code{print-message} which should be non-@code{nil} in an interactive
call, and use the @code{interactive} spec to make sure it is
non-@code{nil}. Here's an example:
@example
(defun foo (&optional print-message)
(interactive "p")
(when print-message
(message "foo")))
@end example
@noindent
Defined in this way, the function does display the message when called
from a keyboard macro. We use @code{"p"} because the numeric prefix
argument is never @code{nil}.
@defun called-interactively-p
This function returns @code{t} when the calling function was called
using @code{call-interactively}.
When possible, instead of using this function, you should use the
method in the example above; that method makes it possible for a
caller to ``pretend'' that the function was called interactively.
@end defun
@node Command Loop Info
@comment node-name, next, previous, up
@section Information from the Command Loop
The editor command loop sets several Lisp variables to keep status
records for itself and for commands that are run.
@defvar last-command
This variable records the name of the previous command executed by the
command loop (the one before the current command). Normally the value
is a symbol with a function definition, but this is not guaranteed.
The value is copied from @code{this-command} when a command returns to
the command loop, except when the command has specified a prefix
argument for the following command.
This variable is always local to the current terminal and cannot be
buffer-local. @xref{Multiple Displays}.
@end defvar
@defvar real-last-command
This variable is set up by Emacs just like @code{last-command},
but never altered by Lisp programs.
@end defvar
@defvar this-command
@cindex current command
This variable records the name of the command now being executed by
the editor command loop. Like @code{last-command}, it is normally a symbol
with a function definition.
The command loop sets this variable just before running a command, and
copies its value into @code{last-command} when the command finishes
(unless the command specified a prefix argument for the following
command).
@cindex kill command repetition
Some commands set this variable during their execution, as a flag for
whatever command runs next. In particular, the functions for killing text
set @code{this-command} to @code{kill-region} so that any kill commands
immediately following will know to append the killed text to the
previous kill.
@end defvar
If you do not want a particular command to be recognized as the previous
command in the case where it got an error, you must code that command to
prevent this. One way is to set @code{this-command} to @code{t} at the
beginning of the command, and set @code{this-command} back to its proper
value at the end, like this:
@example
(defun foo (args@dots{})
(interactive @dots{})
(let ((old-this-command this-command))
(setq this-command t)
@r{@dots{}do the work@dots{}}
(setq this-command old-this-command)))
@end example
@noindent
We do not bind @code{this-command} with @code{let} because that would
restore the old value in case of error---a feature of @code{let} which
in this case does precisely what we want to avoid.
@defvar this-original-command
This has the same value as @code{this-command} except when command
remapping occurs (@pxref{Remapping Commands}). In that case,
@code{this-command} gives the command actually run (the result of
remapping), and @code{this-original-command} gives the command that
was specified to run but remapped into another command.
@end defvar
@defun this-command-keys
This function returns a string or vector containing the key sequence
that invoked the present command, plus any previous commands that
generated the prefix argument for this command. Any events read by the
command using @code{read-event} without a timeout get tacked on to the end.
However, if the command has called @code{read-key-sequence}, it
returns the last read key sequence. @xref{Key Sequence Input}. The
value is a string if all events in the sequence were characters that
fit in a string. @xref{Input Events}.
@example
@group
(this-command-keys)
;; @r{Now use @kbd{C-u C-x C-e} to evaluate that.}
@result{} "^U^X^E"
@end group
@end example
@end defun
@defun this-command-keys-vector
@anchor{Definition of this-command-keys-vector}
Like @code{this-command-keys}, except that it always returns the events
in a vector, so you don't need to deal with the complexities of storing
input events in a string (@pxref{Strings of Events}).
@end defun
@defun clear-this-command-keys &optional keep-record
This function empties out the table of events for
@code{this-command-keys} to return. Unless @var{keep-record} is
non-@code{nil}, it also empties the records that the function
@code{recent-keys} (@pxref{Recording Input}) will subsequently return.
This is useful after reading a password, to prevent the password from
echoing inadvertently as part of the next command in certain cases.
@end defun
@defvar last-nonmenu-event
This variable holds the last input event read as part of a key sequence,
not counting events resulting from mouse menus.
One use of this variable is for telling @code{x-popup-menu} where to pop
up a menu. It is also used internally by @code{y-or-n-p}
(@pxref{Yes-or-No Queries}).
@end defvar
@defvar last-command-event
@defvarx last-command-char
This variable is set to the last input event that was read by the
command loop as part of a command. The principal use of this variable
is in @code{self-insert-command}, which uses it to decide which
character to insert.
@example
@group
last-command-event
;; @r{Now use @kbd{C-u C-x C-e} to evaluate that.}
@result{} 5
@end group
@end example
@noindent
The value is 5 because that is the @acronym{ASCII} code for @kbd{C-e}.
The alias @code{last-command-char} exists for compatibility with
Emacs version 18.
@end defvar
@c Emacs 19 feature
@defvar last-event-frame
This variable records which frame the last input event was directed to.
Usually this is the frame that was selected when the event was
generated, but if that frame has redirected input focus to another
frame, the value is the frame to which the event was redirected.
@xref{Input Focus}.
If the last event came from a keyboard macro, the value is @code{macro}.
@end defvar
@node Adjusting Point
@section Adjusting Point After Commands
@cindex adjusting point
@cindex invisible/intangible text, and point
@cindex @code{display} property, and point display
@cindex @code{composition} property, and point display
It is not easy to display a value of point in the middle of a
sequence of text that has the @code{display}, @code{composition} or
@code{intangible} property, or is invisible. Therefore, after a
command finishes and returns to the command loop, if point is within
such a sequence, the command loop normally moves point to the edge of
the sequence.
A command can inhibit this feature by setting the variable
@code{disable-point-adjustment}:
@defvar disable-point-adjustment
If this variable is non-@code{nil} when a command returns to the
command loop, then the command loop does not check for those text
properties, and does not move point out of sequences that have them.
The command loop sets this variable to @code{nil} before each command,
so if a command sets it, the effect applies only to that command.
@end defvar
@defvar global-disable-point-adjustment
If you set this variable to a non-@code{nil} value, the feature of
moving point out of these sequences is completely turned off.
@end defvar
@node Input Events
@section Input Events
@cindex events
@cindex input events
The Emacs command loop reads a sequence of @dfn{input events} that
represent keyboard or mouse activity. The events for keyboard activity
are characters or symbols; mouse events are always lists. This section
describes the representation and meaning of input events in detail.
@defun eventp object
This function returns non-@code{nil} if @var{object} is an input event
or event type.
Note that any symbol might be used as an event or an event type.
@code{eventp} cannot distinguish whether a symbol is intended by Lisp
code to be used as an event. Instead, it distinguishes whether the
symbol has actually been used in an event that has been read as input in
the current Emacs session. If a symbol has not yet been so used,
@code{eventp} returns @code{nil}.
@end defun
@menu
* Keyboard Events:: Ordinary characters--keys with symbols on them.
* Function Keys:: Function keys--keys with names, not symbols.
* Mouse Events:: Overview of mouse events.
* Click Events:: Pushing and releasing a mouse button.
* Drag Events:: Moving the mouse before releasing the button.
* Button-Down Events:: A button was pushed and not yet released.
* Repeat Events:: Double and triple click (or drag, or down).
* Motion Events:: Just moving the mouse, not pushing a button.
* Focus Events:: Moving the mouse between frames.
* Misc Events:: Other events the system can generate.
* Event Examples:: Examples of the lists for mouse events.
* Classifying Events:: Finding the modifier keys in an event symbol.
Event types.
* Accessing Events:: Functions to extract info from events.
* Strings of Events:: Special considerations for putting
keyboard character events in a string.
@end menu
@node Keyboard Events
@subsection Keyboard Events
@cindex keyboard events
There are two kinds of input you can get from the keyboard: ordinary
keys, and function keys. Ordinary keys correspond to characters; the
events they generate are represented in Lisp as characters. The event
type of a character event is the character itself (an integer); see
@ref{Classifying Events}.
@cindex modifier bits (of input character)
@cindex basic code (of input character)
An input character event consists of a @dfn{basic code} between 0 and
524287, plus any or all of these @dfn{modifier bits}:
@table @asis
@item meta
The
@tex
@math{2^{27}}
@end tex
@ifnottex
2**27
@end ifnottex
bit in the character code indicates a character
typed with the meta key held down.
@item control
The
@tex
@math{2^{26}}
@end tex
@ifnottex
2**26
@end ifnottex
bit in the character code indicates a non-@acronym{ASCII}
control character.
@sc{ascii} control characters such as @kbd{C-a} have special basic
codes of their own, so Emacs needs no special bit to indicate them.
Thus, the code for @kbd{C-a} is just 1.
But if you type a control combination not in @acronym{ASCII}, such as
@kbd{%} with the control key, the numeric value you get is the code
for @kbd{%} plus
@tex
@math{2^{26}}
@end tex
@ifnottex
2**26
@end ifnottex
(assuming the terminal supports non-@acronym{ASCII}
control characters).
@item shift
The
@tex
@math{2^{25}}
@end tex
@ifnottex
2**25
@end ifnottex
bit in the character code indicates an @acronym{ASCII} control
character typed with the shift key held down.
For letters, the basic code itself indicates upper versus lower case;
for digits and punctuation, the shift key selects an entirely different
character with a different basic code. In order to keep within the
@acronym{ASCII} character set whenever possible, Emacs avoids using the
@tex
@math{2^{25}}
@end tex
@ifnottex
2**25
@end ifnottex
bit for those characters.
However, @acronym{ASCII} provides no way to distinguish @kbd{C-A} from
@kbd{C-a}, so Emacs uses the
@tex
@math{2^{25}}
@end tex
@ifnottex
2**25
@end ifnottex
bit in @kbd{C-A} and not in
@kbd{C-a}.
@item hyper
The
@tex
@math{2^{24}}
@end tex
@ifnottex
2**24
@end ifnottex
bit in the character code indicates a character
typed with the hyper key held down.
@item super
The
@tex
@math{2^{23}}
@end tex
@ifnottex
2**23
@end ifnottex
bit in the character code indicates a character
typed with the super key held down.
@item alt
The
@tex
@math{2^{22}}
@end tex
@ifnottex
2**22
@end ifnottex
bit in the character code indicates a character typed with
the alt key held down. (On some terminals, the key labeled @key{ALT}
is actually the meta key.)
@end table
It is best to avoid mentioning specific bit numbers in your program.
To test the modifier bits of a character, use the function
@code{event-modifiers} (@pxref{Classifying Events}). When making key
bindings, you can use the read syntax for characters with modifier bits
(@samp{\C-}, @samp{\M-}, and so on). For making key bindings with
@code{define-key}, you can use lists such as @code{(control hyper ?x)} to
specify the characters (@pxref{Changing Key Bindings}). The function
@code{event-convert-list} converts such a list into an event type
(@pxref{Classifying Events}).
@node Function Keys
@subsection Function Keys
@cindex function keys
Most keyboards also have @dfn{function keys}---keys that have names or
symbols that are not characters. Function keys are represented in Emacs
Lisp as symbols; the symbol's name is the function key's label, in lower
case. For example, pressing a key labeled @key{F1} places the symbol
@code{f1} in the input stream.
The event type of a function key event is the event symbol itself.
@xref{Classifying Events}.
Here are a few special cases in the symbol-naming convention for
function keys:
@table @asis
@item @code{backspace}, @code{tab}, @code{newline}, @code{return}, @code{delete}
These keys correspond to common @acronym{ASCII} control characters that have
special keys on most keyboards.
In @acronym{ASCII}, @kbd{C-i} and @key{TAB} are the same character. If the
terminal can distinguish between them, Emacs conveys the distinction to
Lisp programs by representing the former as the integer 9, and the
latter as the symbol @code{tab}.
Most of the time, it's not useful to distinguish the two. So normally
@code{function-key-map} (@pxref{Translation Keymaps}) is set up to map
@code{tab} into 9. Thus, a key binding for character code 9 (the
character @kbd{C-i}) also applies to @code{tab}. Likewise for the other
symbols in this group. The function @code{read-char} likewise converts
these events into characters.
In @acronym{ASCII}, @key{BS} is really @kbd{C-h}. But @code{backspace}
converts into the character code 127 (@key{DEL}), not into code 8
(@key{BS}). This is what most users prefer.
@item @code{left}, @code{up}, @code{right}, @code{down}
Cursor arrow keys
@item @code{kp-add}, @code{kp-decimal}, @code{kp-divide}, @dots{}
Keypad keys (to the right of the regular keyboard).
@item @code{kp-0}, @code{kp-1}, @dots{}
Keypad keys with digits.
@item @code{kp-f1}, @code{kp-f2}, @code{kp-f3}, @code{kp-f4}
Keypad PF keys.
@item @code{kp-home}, @code{kp-left}, @code{kp-up}, @code{kp-right}, @code{kp-down}
Keypad arrow keys. Emacs normally translates these into the
corresponding non-keypad keys @code{home}, @code{left}, @dots{}
@item @code{kp-prior}, @code{kp-next}, @code{kp-end}, @code{kp-begin}, @code{kp-insert}, @code{kp-delete}
Additional keypad duplicates of keys ordinarily found elsewhere. Emacs
normally translates these into the like-named non-keypad keys.
@end table
You can use the modifier keys @key{ALT}, @key{CTRL}, @key{HYPER},
@key{META}, @key{SHIFT}, and @key{SUPER} with function keys. The way to
represent them is with prefixes in the symbol name:
@table @samp
@item A-
The alt modifier.
@item C-
The control modifier.
@item H-
The hyper modifier.
@item M-
The meta modifier.
@item S-
The shift modifier.
@item s-
The super modifier.
@end table
Thus, the symbol for the key @key{F3} with @key{META} held down is
@code{M-f3}. When you use more than one prefix, we recommend you
write them in alphabetical order; but the order does not matter in
arguments to the key-binding lookup and modification functions.
@node Mouse Events
@subsection Mouse Events
Emacs supports four kinds of mouse events: click events, drag events,
button-down events, and motion events. All mouse events are represented
as lists. The @sc{car} of the list is the event type; this says which
mouse button was involved, and which modifier keys were used with it.
The event type can also distinguish double or triple button presses
(@pxref{Repeat Events}). The rest of the list elements give position
and time information.
For key lookup, only the event type matters: two events of the same type
necessarily run the same command. The command can access the full
values of these events using the @samp{e} interactive code.
@xref{Interactive Codes}.
A key sequence that starts with a mouse event is read using the keymaps
of the buffer in the window that the mouse was in, not the current
buffer. This does not imply that clicking in a window selects that
window or its buffer---that is entirely under the control of the command
binding of the key sequence.
@node Click Events
@subsection Click Events
@cindex click event
@cindex mouse click event
When the user presses a mouse button and releases it at the same
location, that generates a @dfn{click} event. All mouse click event
share the same format:
@example
(@var{event-type} @var{position} @var{click-count})
@end example
@table @asis
@item @var{event-type}
This is a symbol that indicates which mouse button was used. It is
one of the symbols @code{mouse-1}, @code{mouse-2}, @dots{}, where the
buttons are numbered left to right.
You can also use prefixes @samp{A-}, @samp{C-}, @samp{H-}, @samp{M-},
@samp{S-} and @samp{s-} for modifiers alt, control, hyper, meta, shift
and super, just as you would with function keys.
This symbol also serves as the event type of the event. Key bindings
describe events by their types; thus, if there is a key binding for
@code{mouse-1}, that binding would apply to all events whose
@var{event-type} is @code{mouse-1}.
@item @var{position}
This is the position where the mouse click occurred. The actual
format of @var{position} depends on what part of a window was clicked
on. The various formats are described below.
@item @var{click-count}
This is the number of rapid repeated presses so far of the same mouse
button. @xref{Repeat Events}.
@end table
For mouse click events in the text area, mode line, header line, or in
the marginal areas, @var{position} has this form:
@example
(@var{window} @var{pos-or-area} (@var{x} . @var{y}) @var{timestamp}
@var{object} @var{text-pos} (@var{col} . @var{row})
@var{image} (@var{dx} . @var{dy}) (@var{width} . @var{height}))
@end example
@table @asis
@item @var{window}
This is the window in which the click occurred.
@item @var{pos-or-area}
This is the buffer position of the character clicked on in the text
area, or if clicked outside the text area, it is the window area in
which the click occurred. It is one of the symbols @code{mode-line},
@code{header-line}, @code{vertical-line}, @code{left-margin},
@code{right-margin}, @code{left-fringe}, or @code{right-fringe}.
@item @var{x}, @var{y}
These are the pixel-denominated coordinates of the click, relative to
the top left corner of @var{window}, which is @code{(0 . 0)}.
For the mode or header line, @var{y} does not have meaningful data.
For the vertical line, @var{x} does not have meaningful data.
@item @var{timestamp}
This is the time at which the event occurred, in milliseconds.
@item @var{object}
This is the object on which the click occurred. It is either
@code{nil} if there is no string property, or it has the form
(@var{string} . @var{string-pos}) when there is a string-type text
property at the click position.
@item @var{string}
This is the string on which the click occurred, including any
properties.
@item @var{string-pos}
This is the position in the string on which the click occurred,
relevant if properties at the click need to be looked up.
@item @var{text-pos}
For clicks on a marginal area or on a fringe, this is the buffer
position of the first visible character in the corresponding line in
the window. For other events, it is the current buffer position in
the window.
@item @var{col}, @var{row}
These are the actual coordinates of the glyph under the @var{x},
@var{y} position, possibly padded with default character width
glyphs if @var{x} is beyond the last glyph on the line.
@item @var{image}
This is the image object on which the click occurred. It is either
@code{nil} if there is no image at the position clicked on, or it is
an image object as returned by @code{find-image} if click was in an image.
@item @var{dx}, @var{dy}
These are the pixel-denominated coordinates of the click, relative to
the top left corner of @var{object}, which is @code{(0 . 0)}. If
@var{object} is @code{nil}, the coordinates are relative to the top
left corner of the character glyph clicked on.
@end table
For mouse clicks on a scroll-bar, @var{position} has this form:
@example
(@var{window} @var{area} (@var{portion} . @var{whole}) @var{timestamp} @var{part})
@end example
@table @asis
@item @var{window}
This is the window whose scroll-bar was clicked on.
@item @var{area}
This is the scroll bar where the click occurred. It is one of the
symbols @code{vertical-scroll-bar} or @code{horizontal-scroll-bar}.
@item @var{portion}
This is the distance of the click from the top or left end of
the scroll bar.
@item @var{whole}
This is the length of the entire scroll bar.
@item @var{timestamp}
This is the time at which the event occurred, in milliseconds.
@item @var{part}
This is the part of the scroll-bar which was clicked on. It is one
of the symbols @code{above-handle}, @code{handle}, @code{below-handle},
@code{up}, @code{down}, @code{top}, @code{bottom}, and @code{end-scroll}.
@end table
In one special case, @var{buffer-pos} is a list containing a symbol (one
of the symbols listed above) instead of just the symbol. This happens
after the imaginary prefix keys for the event are inserted into the
input stream. @xref{Key Sequence Input}.
@node Drag Events
@subsection Drag Events
@cindex drag event
@cindex mouse drag event
With Emacs, you can have a drag event without even changing your
clothes. A @dfn{drag event} happens every time the user presses a mouse
button and then moves the mouse to a different character position before
releasing the button. Like all mouse events, drag events are
represented in Lisp as lists. The lists record both the starting mouse
position and the final position, like this:
@example
(@var{event-type}
(@var{window1} @var{buffer-pos1} (@var{x1} . @var{y1}) @var{timestamp1})
(@var{window2} @var{buffer-pos2} (@var{x2} . @var{y2}) @var{timestamp2})
@var{click-count})
@end example
For a drag event, the name of the symbol @var{event-type} contains the
prefix @samp{drag-}. For example, dragging the mouse with button 2 held
down generates a @code{drag-mouse-2} event. The second and third
elements of the event give the starting and ending position of the drag.
Aside from that, the data have the same meanings as in a click event
(@pxref{Click Events}). You can access the second element of any mouse
event in the same way, with no need to distinguish drag events from
others.
The @samp{drag-} prefix follows the modifier key prefixes such as
@samp{C-} and @samp{M-}.
If @code{read-key-sequence} receives a drag event that has no key
binding, and the corresponding click event does have a binding, it
changes the drag event into a click event at the drag's starting
position. This means that you don't have to distinguish between click
and drag events unless you want to.
@node Button-Down Events
@subsection Button-Down Events
@cindex button-down event
Click and drag events happen when the user releases a mouse button.
They cannot happen earlier, because there is no way to distinguish a
click from a drag until the button is released.
If you want to take action as soon as a button is pressed, you need to
handle @dfn{button-down} events.@footnote{Button-down is the
conservative antithesis of drag.} These occur as soon as a button is
pressed. They are represented by lists that look exactly like click
events (@pxref{Click Events}), except that the @var{event-type} symbol
name contains the prefix @samp{down-}. The @samp{down-} prefix follows
modifier key prefixes such as @samp{C-} and @samp{M-}.
The function @code{read-key-sequence} ignores any button-down events
that don't have command bindings; therefore, the Emacs command loop
ignores them too. This means that you need not worry about defining
button-down events unless you want them to do something. The usual
reason to define a button-down event is so that you can track mouse
motion (by reading motion events) until the button is released.
@xref{Motion Events}.
@node Repeat Events
@subsection Repeat Events
@cindex repeat events
@cindex double-click events
@cindex triple-click events
@cindex mouse events, repeated
If you press the same mouse button more than once in quick succession
without moving the mouse, Emacs generates special @dfn{repeat} mouse
events for the second and subsequent presses.
The most common repeat events are @dfn{double-click} events. Emacs
generates a double-click event when you click a button twice; the event
happens when you release the button (as is normal for all click
events).
The event type of a double-click event contains the prefix
@samp{double-}. Thus, a double click on the second mouse button with
@key{meta} held down comes to the Lisp program as
@code{M-double-mouse-2}. If a double-click event has no binding, the
binding of the corresponding ordinary click event is used to execute
it. Thus, you need not pay attention to the double click feature
unless you really want to.
When the user performs a double click, Emacs generates first an ordinary
click event, and then a double-click event. Therefore, you must design
the command binding of the double click event to assume that the
single-click command has already run. It must produce the desired
results of a double click, starting from the results of a single click.
This is convenient, if the meaning of a double click somehow ``builds
on'' the meaning of a single click---which is recommended user interface
design practice for double clicks.
If you click a button, then press it down again and start moving the
mouse with the button held down, then you get a @dfn{double-drag} event
when you ultimately release the button. Its event type contains
@samp{double-drag} instead of just @samp{drag}. If a double-drag event
has no binding, Emacs looks for an alternate binding as if the event
were an ordinary drag.
Before the double-click or double-drag event, Emacs generates a
@dfn{double-down} event when the user presses the button down for the
second time. Its event type contains @samp{double-down} instead of just
@samp{down}. If a double-down event has no binding, Emacs looks for an
alternate binding as if the event were an ordinary button-down event.
If it finds no binding that way either, the double-down event is
ignored.
To summarize, when you click a button and then press it again right
away, Emacs generates a down event and a click event for the first
click, a double-down event when you press the button again, and finally
either a double-click or a double-drag event.
If you click a button twice and then press it again, all in quick
succession, Emacs generates a @dfn{triple-down} event, followed by
either a @dfn{triple-click} or a @dfn{triple-drag}. The event types of
these events contain @samp{triple} instead of @samp{double}. If any
triple event has no binding, Emacs uses the binding that it would use
for the corresponding double event.
If you click a button three or more times and then press it again, the
events for the presses beyond the third are all triple events. Emacs
does not have separate event types for quadruple, quintuple, etc.@:
events. However, you can look at the event list to find out precisely
how many times the button was pressed.
@defun event-click-count event
This function returns the number of consecutive button presses that led
up to @var{event}. If @var{event} is a double-down, double-click or
double-drag event, the value is 2. If @var{event} is a triple event,
the value is 3 or greater. If @var{event} is an ordinary mouse event
(not a repeat event), the value is 1.
@end defun
@defopt double-click-fuzz
To generate repeat events, successive mouse button presses must be at
approximately the same screen position. The value of
@code{double-click-fuzz} specifies the maximum number of pixels the
mouse may be moved (horizontally or vertically) between two successive
clicks to make a double-click.
This variable is also the threshold for motion of the mouse to count
as a drag.
@end defopt
@defopt double-click-time
To generate repeat events, the number of milliseconds between
successive button presses must be less than the value of
@code{double-click-time}. Setting @code{double-click-time} to
@code{nil} disables multi-click detection entirely. Setting it to
@code{t} removes the time limit; Emacs then detects multi-clicks by
position only.
@end defopt
@node Motion Events
@subsection Motion Events
@cindex motion event
@cindex mouse motion events
Emacs sometimes generates @dfn{mouse motion} events to describe motion
of the mouse without any button activity. Mouse motion events are
represented by lists that look like this:
@example
(mouse-movement (@var{window} @var{buffer-pos} (@var{x} . @var{y}) @var{timestamp}))
@end example
The second element of the list describes the current position of the
mouse, just as in a click event (@pxref{Click Events}).
The special form @code{track-mouse} enables generation of motion events
within its body. Outside of @code{track-mouse} forms, Emacs does not
generate events for mere motion of the mouse, and these events do not
appear. @xref{Mouse Tracking}.
@node Focus Events
@subsection Focus Events
@cindex focus event
Window systems provide general ways for the user to control which window
gets keyboard input. This choice of window is called the @dfn{focus}.
When the user does something to switch between Emacs frames, that
generates a @dfn{focus event}. The normal definition of a focus event,
in the global keymap, is to select a new frame within Emacs, as the user
would expect. @xref{Input Focus}.
Focus events are represented in Lisp as lists that look like this:
@example
(switch-frame @var{new-frame})
@end example
@noindent
where @var{new-frame} is the frame switched to.
Most X window managers are set up so that just moving the mouse into a
window is enough to set the focus there. Emacs appears to do this,
because it changes the cursor to solid in the new frame. However, there
is no need for the Lisp program to know about the focus change until
some other kind of input arrives. So Emacs generates a focus event only
when the user actually types a keyboard key or presses a mouse button in
the new frame; just moving the mouse between frames does not generate a
focus event.
A focus event in the middle of a key sequence would garble the
sequence. So Emacs never generates a focus event in the middle of a key
sequence. If the user changes focus in the middle of a key
sequence---that is, after a prefix key---then Emacs reorders the events
so that the focus event comes either before or after the multi-event key
sequence, and not within it.
@node Misc Events
@subsection Miscellaneous System Events
A few other event types represent occurrences within the system.
@table @code
@cindex @code{delete-frame} event
@item (delete-frame (@var{frame}))
This kind of event indicates that the user gave the window manager
a command to delete a particular window, which happens to be an Emacs frame.
The standard definition of the @code{delete-frame} event is to delete @var{frame}.
@cindex @code{iconify-frame} event
@item (iconify-frame (@var{frame}))
This kind of event indicates that the user iconified @var{frame} using
the window manager. Its standard definition is @code{ignore}; since the
frame has already been iconified, Emacs has no work to do. The purpose
of this event type is so that you can keep track of such events if you
want to.
@cindex @code{make-frame-visible} event
@item (make-frame-visible (@var{frame}))
This kind of event indicates that the user deiconified @var{frame} using
the window manager. Its standard definition is @code{ignore}; since the
frame has already been made visible, Emacs has no work to do.
@cindex @code{wheel-up} event
@cindex @code{wheel-down} event
@item (wheel-up @var{position})
@item (wheel-down @var{position})
These kinds of event are generated by moving a mouse wheel. Their
usual meaning is a kind of scroll or zoom.
The element @var{position} is a list describing the position of the
event, in the same format as used in a mouse-click event.
This kind of event is generated only on some kinds of systems. On some
systems, @code{mouse-4} and @code{mouse-5} are used instead. For
portable code, use the variables @code{mouse-wheel-up-event} and
@code{mouse-wheel-down-event} defined in @file{mwheel.el} to determine
what event types to expect for the mouse wheel.
@cindex @code{drag-n-drop} event
@item (drag-n-drop @var{position} @var{files})
This kind of event is generated when a group of files is
selected in an application outside of Emacs, and then dragged and
dropped onto an Emacs frame.
The element @var{position} is a list describing the position of the
event, in the same format as used in a mouse-click event, and
@var{files} is the list of file names that were dragged and dropped.
The usual way to handle this event is by visiting these files.
This kind of event is generated, at present, only on some kinds of
systems.
@cindex @code{help-echo} event
@item help-echo
This kind of event is generated when a mouse pointer moves onto a
portion of buffer text which has a @code{help-echo} text property.
The generated event has this form:
@example
(help-echo @var{frame} @var{help} @var{window} @var{object} @var{pos})
@end example
@noindent
The precise meaning of the event parameters and the way these
parameters are used to display the help-echo text are described in
@ref{Text help-echo}.
@cindex @code{sigusr1} event
@cindex @code{sigusr2} event
@cindex user signals
@item sigusr1
@itemx sigusr2
These events are generated when the Emacs process receives
the signals @code{SIGUSR1} and @code{SIGUSR2}. They contain no
additional data because signals do not carry additional information.
To catch a user signal, bind the corresponding event to an interactive
command in the @code{special-event-map} (@pxref{Active Keymaps}).
The command is called with no arguments, and the specific signal event is
available in @code{last-input-event}. For example:
@smallexample
(defun sigusr-handler ()
(interactive)
(message "Caught signal %S" last-input-event))
(define-key special-event-map [sigusr1] 'sigusr-handler)
@end smallexample
To test the signal handler, you can make Emacs send a signal to itself:
@smallexample
(signal-process (emacs-pid) 'sigusr1)
@end smallexample
@end table
If one of these events arrives in the middle of a key sequence---that
is, after a prefix key---then Emacs reorders the events so that this
event comes either before or after the multi-event key sequence, not
within it.
@node Event Examples
@subsection Event Examples
If the user presses and releases the left mouse button over the same
location, that generates a sequence of events like this:
@smallexample
(down-mouse-1 (#<window 18 on NEWS> 2613 (0 . 38) -864320))
(mouse-1 (#<window 18 on NEWS> 2613 (0 . 38) -864180))
@end smallexample
While holding the control key down, the user might hold down the
second mouse button, and drag the mouse from one line to the next.
That produces two events, as shown here:
@smallexample
(C-down-mouse-2 (#<window 18 on NEWS> 3440 (0 . 27) -731219))
(C-drag-mouse-2 (#<window 18 on NEWS> 3440 (0 . 27) -731219)
(#<window 18 on NEWS> 3510 (0 . 28) -729648))
@end smallexample
While holding down the meta and shift keys, the user might press the
second mouse button on the window's mode line, and then drag the mouse
into another window. That produces a pair of events like these:
@smallexample
(M-S-down-mouse-2 (#<window 18 on NEWS> mode-line (33 . 31) -457844))
(M-S-drag-mouse-2 (#<window 18 on NEWS> mode-line (33 . 31) -457844)
(#<window 20 on carlton-sanskrit.tex> 161 (33 . 3)
-453816))
@end smallexample
To handle a SIGUSR1 signal, define an interactive function, and
bind it to the @code{signal usr1} event sequence:
@smallexample
(defun usr1-handler ()
(interactive)
(message "Got USR1 signal"))
(global-set-key [signal usr1] 'usr1-handler)
@end smallexample
@node Classifying Events
@subsection Classifying Events
@cindex event type
Every event has an @dfn{event type}, which classifies the event for
key binding purposes. For a keyboard event, the event type equals the
event value; thus, the event type for a character is the character, and
the event type for a function key symbol is the symbol itself. For
events that are lists, the event type is the symbol in the @sc{car} of
the list. Thus, the event type is always a symbol or a character.
Two events of the same type are equivalent where key bindings are
concerned; thus, they always run the same command. That does not
necessarily mean they do the same things, however, as some commands look
at the whole event to decide what to do. For example, some commands use
the location of a mouse event to decide where in the buffer to act.
Sometimes broader classifications of events are useful. For example,
you might want to ask whether an event involved the @key{META} key,
regardless of which other key or mouse button was used.
The functions @code{event-modifiers} and @code{event-basic-type} are
provided to get such information conveniently.
@defun event-modifiers event
This function returns a list of the modifiers that @var{event} has. The
modifiers are symbols; they include @code{shift}, @code{control},
@code{meta}, @code{alt}, @code{hyper} and @code{super}. In addition,
the modifiers list of a mouse event symbol always contains one of
@code{click}, @code{drag}, and @code{down}. For double or triple
events, it also contains @code{double} or @code{triple}.
The argument @var{event} may be an entire event object, or just an
event type. If @var{event} is a symbol that has never been used in an
event that has been read as input in the current Emacs session, then
@code{event-modifiers} can return @code{nil}, even when @var{event}
actually has modifiers.
Here are some examples:
@example
(event-modifiers ?a)
@result{} nil
(event-modifiers ?A)
@result{} (shift)
(event-modifiers ?\C-a)
@result{} (control)
(event-modifiers ?\C-%)
@result{} (control)
(event-modifiers ?\C-\S-a)
@result{} (control shift)
(event-modifiers 'f5)
@result{} nil
(event-modifiers 's-f5)
@result{} (super)
(event-modifiers 'M-S-f5)
@result{} (meta shift)
(event-modifiers 'mouse-1)
@result{} (click)
(event-modifiers 'down-mouse-1)
@result{} (down)
@end example
The modifiers list for a click event explicitly contains @code{click},
but the event symbol name itself does not contain @samp{click}.
@end defun
@defun event-basic-type event
This function returns the key or mouse button that @var{event}
describes, with all modifiers removed. The @var{event} argument is as
in @code{event-modifiers}. For example:
@example
(event-basic-type ?a)
@result{} 97
(event-basic-type ?A)
@result{} 97
(event-basic-type ?\C-a)
@result{} 97
(event-basic-type ?\C-\S-a)
@result{} 97
(event-basic-type 'f5)
@result{} f5
(event-basic-type 's-f5)
@result{} f5
(event-basic-type 'M-S-f5)
@result{} f5
(event-basic-type 'down-mouse-1)
@result{} mouse-1
@end example
@end defun
@defun mouse-movement-p object
This function returns non-@code{nil} if @var{object} is a mouse movement
event.
@end defun
@defun event-convert-list list
This function converts a list of modifier names and a basic event type
to an event type which specifies all of them. The basic event type
must be the last element of the list. For example,
@example
(event-convert-list '(control ?a))
@result{} 1
(event-convert-list '(control meta ?a))
@result{} -134217727
(event-convert-list '(control super f1))
@result{} C-s-f1
@end example
@end defun
@node Accessing Events
@subsection Accessing Events
@cindex mouse events, data in
This section describes convenient functions for accessing the data in
a mouse button or motion event.
These two functions return the starting or ending position of a
mouse-button event, as a list of this form:
@example
(@var{window} @var{pos-or-area} (@var{x} . @var{y}) @var{timestamp}
@var{object} @var{text-pos} (@var{col} . @var{row})
@var{image} (@var{dx} . @var{dy}) (@var{width} . @var{height}))
@end example
@defun event-start event
This returns the starting position of @var{event}.
If @var{event} is a click or button-down event, this returns the
location of the event. If @var{event} is a drag event, this returns the
drag's starting position.
@end defun
@defun event-end event
This returns the ending position of @var{event}.
If @var{event} is a drag event, this returns the position where the user
released the mouse button. If @var{event} is a click or button-down
event, the value is actually the starting position, which is the only
position such events have.
@end defun
@cindex mouse position list, accessing
These functions take a position list as described above, and
return various parts of it.
@defun posn-window position
Return the window that @var{position} is in.
@end defun
@defun posn-area position
Return the window area recorded in @var{position}. It returns @code{nil}
when the event occurred in the text area of the window; otherwise, it
is a symbol identifying the area in which the event occurred.
@end defun
@defun posn-point position
Return the buffer position in @var{position}. When the event occurred
in the text area of the window, in a marginal area, or on a fringe,
this is an integer specifying a buffer position. Otherwise, the value
is undefined.
@end defun
@defun posn-x-y position
Return the pixel-based x and y coordinates in @var{position}, as a
cons cell @code{(@var{x} . @var{y})}. These coordinates are relative
to the window given by @code{posn-window}.
This example shows how to convert these window-relative coordinates
into frame-relative coordinates:
@example
(defun frame-relative-coordinates (position)
"Return frame-relative coordinates from POSITION."
(let* ((x-y (posn-x-y position))
(window (posn-window position))
(edges (window-inside-pixel-edges window)))
(cons (+ (car x-y) (car edges))
(+ (cdr x-y) (cadr edges)))))
@end example
@end defun
@defun posn-col-row position
Return the row and column (in units of the frame's default character
height and width) of @var{position}, as a cons cell @code{(@var{col} .
@var{row})}. These are computed from the @var{x} and @var{y} values
actually found in @var{position}.
@end defun
@defun posn-actual-col-row position
Return the actual row and column in @var{position}, as a cons cell
@code{(@var{col} . @var{row})}. The values are the actual row number
in the window, and the actual character number in that row. It returns
@code{nil} if @var{position} does not include actual positions values.
You can use @code{posn-col-row} to get approximate values.
@end defun
@defun posn-string position
Return the string object in @var{position}, either @code{nil}, or a
cons cell @code{(@var{string} . @var{string-pos})}.
@end defun
@defun posn-image position
Return the image object in @var{position}, either @code{nil}, or an
image @code{(image ...)}.
@end defun
@defun posn-object position
Return the image or string object in @var{position}, either
@code{nil}, an image @code{(image ...)}, or a cons cell
@code{(@var{string} . @var{string-pos})}.
@end defun
@defun posn-object-x-y position
Return the pixel-based x and y coordinates relative to the upper left
corner of the object in @var{position} as a cons cell @code{(@var{dx}
. @var{dy})}. If the @var{position} is a buffer position, return the
relative position in the character at that position.
@end defun
@defun posn-object-width-height position
Return the pixel width and height of the object in @var{position} as a
cons cell @code{(@var{width} . @var{height})}. If the @var{position}
is a buffer position, return the size of the character at that position.
@end defun
@cindex timestamp of a mouse event
@defun posn-timestamp position
Return the timestamp in @var{position}. This is the time at which the
event occurred, in milliseconds.
@end defun
These functions compute a position list given particular buffer
position or screen position. You can access the data in this position
list with the functions described above.
@defun posn-at-point &optional pos window
This function returns a position list for position @var{pos} in
@var{window}. @var{pos} defaults to point in @var{window};
@var{window} defaults to the selected window.
@code{posn-at-point} returns @code{nil} if @var{pos} is not visible in
@var{window}.
@end defun
@defun posn-at-x-y x y &optional frame-or-window whole
This function returns position information corresponding to pixel
coordinates @var{x} and @var{y} in a specified frame or window,
@var{frame-or-window}, which defaults to the selected window.
The coordinates @var{x} and @var{y} are relative to the
frame or window used.
If @var{whole} is @code{nil}, the coordinates are relative
to the window text area, otherwise they are relative to
the entire window area including scroll bars, margins and fringes.
@end defun
These functions are useful for decoding scroll bar events.
@defun scroll-bar-event-ratio event
This function returns the fractional vertical position of a scroll bar
event within the scroll bar. The value is a cons cell
@code{(@var{portion} . @var{whole})} containing two integers whose ratio
is the fractional position.
@end defun
@defun scroll-bar-scale ratio total
This function multiplies (in effect) @var{ratio} by @var{total},
rounding the result to an integer. The argument @var{ratio} is not a
number, but rather a pair @code{(@var{num} . @var{denom})}---typically a
value returned by @code{scroll-bar-event-ratio}.
This function is handy for scaling a position on a scroll bar into a
buffer position. Here's how to do that:
@example
(+ (point-min)
(scroll-bar-scale
(posn-x-y (event-start event))
(- (point-max) (point-min))))
@end example
Recall that scroll bar events have two integers forming a ratio, in place
of a pair of x and y coordinates.
@end defun
@node Strings of Events
@subsection Putting Keyboard Events in Strings
@cindex keyboard events in strings
@cindex strings with keyboard events
In most of the places where strings are used, we conceptualize the
string as containing text characters---the same kind of characters found
in buffers or files. Occasionally Lisp programs use strings that
conceptually contain keyboard characters; for example, they may be key
sequences or keyboard macro definitions. However, storing keyboard
characters in a string is a complex matter, for reasons of historical
compatibility, and it is not always possible.
We recommend that new programs avoid dealing with these complexities
by not storing keyboard events in strings. Here is how to do that:
@itemize @bullet
@item
Use vectors instead of strings for key sequences, when you plan to use
them for anything other than as arguments to @code{lookup-key} and
@code{define-key}. For example, you can use
@code{read-key-sequence-vector} instead of @code{read-key-sequence}, and
@code{this-command-keys-vector} instead of @code{this-command-keys}.
@item
Use vectors to write key sequence constants containing meta characters,
even when passing them directly to @code{define-key}.
@item
When you have to look at the contents of a key sequence that might be a
string, use @code{listify-key-sequence} (@pxref{Event Input Misc})
first, to convert it to a list.
@end itemize
The complexities stem from the modifier bits that keyboard input
characters can include. Aside from the Meta modifier, none of these
modifier bits can be included in a string, and the Meta modifier is
allowed only in special cases.
The earliest GNU Emacs versions represented meta characters as codes
in the range of 128 to 255. At that time, the basic character codes
ranged from 0 to 127, so all keyboard character codes did fit in a
string. Many Lisp programs used @samp{\M-} in string constants to stand
for meta characters, especially in arguments to @code{define-key} and
similar functions, and key sequences and sequences of events were always
represented as strings.
When we added support for larger basic character codes beyond 127, and
additional modifier bits, we had to change the representation of meta
characters. Now the flag that represents the Meta modifier in a
character is
@tex
@math{2^{27}}
@end tex
@ifnottex
2**27
@end ifnottex
and such numbers cannot be included in a string.
To support programs with @samp{\M-} in string constants, there are
special rules for including certain meta characters in a string.
Here are the rules for interpreting a string as a sequence of input
characters:
@itemize @bullet
@item
If the keyboard character value is in the range of 0 to 127, it can go
in the string unchanged.
@item
The meta variants of those characters, with codes in the range of
@tex
@math{2^{27}}
@end tex
@ifnottex
2**27
@end ifnottex
to
@tex
@math{2^{27} + 127},
@end tex
@ifnottex
2**27+127,
@end ifnottex
can also go in the string, but you must change their
numeric values. You must set the
@tex
@math{2^{7}}
@end tex
@ifnottex
2**7
@end ifnottex
bit instead of the
@tex
@math{2^{27}}
@end tex
@ifnottex
2**27
@end ifnottex
bit, resulting in a value between 128 and 255. Only a unibyte string
can include these codes.
@item
Non-@acronym{ASCII} characters above 256 can be included in a multibyte string.
@item
Other keyboard character events cannot fit in a string. This includes
keyboard events in the range of 128 to 255.
@end itemize
Functions such as @code{read-key-sequence} that construct strings of
keyboard input characters follow these rules: they construct vectors
instead of strings, when the events won't fit in a string.
When you use the read syntax @samp{\M-} in a string, it produces a
code in the range of 128 to 255---the same code that you get if you
modify the corresponding keyboard event to put it in the string. Thus,
meta events in strings work consistently regardless of how they get into
the strings.
However, most programs would do well to avoid these issues by
following the recommendations at the beginning of this section.
@node Reading Input
@section Reading Input
@cindex read input
@cindex keyboard input
The editor command loop reads key sequences using the function
@code{read-key-sequence}, which uses @code{read-event}. These and other
functions for event input are also available for use in Lisp programs.
See also @code{momentary-string-display} in @ref{Temporary Displays},
and @code{sit-for} in @ref{Waiting}. @xref{Terminal Input}, for
functions and variables for controlling terminal input modes and
debugging terminal input.
For higher-level input facilities, see @ref{Minibuffers}.
@menu
* Key Sequence Input:: How to read one key sequence.
* Reading One Event:: How to read just one event.
* Event Mod:: How Emacs modifies events as they are read.
* Invoking the Input Method:: How reading an event uses the input method.
* Quoted Character Input:: Asking the user to specify a character.
* Event Input Misc:: How to reread or throw away input events.
@end menu
@node Key Sequence Input
@subsection Key Sequence Input
@cindex key sequence input
The command loop reads input a key sequence at a time, by calling
@code{read-key-sequence}. Lisp programs can also call this function;
for example, @code{describe-key} uses it to read the key to describe.
@defun read-key-sequence prompt &optional continue-echo dont-downcase-last switch-frame-ok command-loop
This function reads a key sequence and returns it as a string or
vector. It keeps reading events until it has accumulated a complete key
sequence; that is, enough to specify a non-prefix command using the
currently active keymaps. (Remember that a key sequence that starts
with a mouse event is read using the keymaps of the buffer in the
window that the mouse was in, not the current buffer.)
If the events are all characters and all can fit in a string, then
@code{read-key-sequence} returns a string (@pxref{Strings of Events}).
Otherwise, it returns a vector, since a vector can hold all kinds of
events---characters, symbols, and lists. The elements of the string or
vector are the events in the key sequence.
Reading a key sequence includes translating the events in various
ways. @xref{Translation Keymaps}.
The argument @var{prompt} is either a string to be displayed in the
echo area as a prompt, or @code{nil}, meaning not to display a prompt.
The argument @var{continue-echo}, if non-@code{nil}, means to echo
this key as a continuation of the previous key.
Normally any upper case event is converted to lower case if the
original event is undefined and the lower case equivalent is defined.
The argument @var{dont-downcase-last}, if non-@code{nil}, means do not
convert the last event to lower case. This is appropriate for reading
a key sequence to be defined.
The argument @var{switch-frame-ok}, if non-@code{nil}, means that this
function should process a @code{switch-frame} event if the user
switches frames before typing anything. If the user switches frames
in the middle of a key sequence, or at the start of the sequence but
@var{switch-frame-ok} is @code{nil}, then the event will be put off
until after the current key sequence.
The argument @var{command-loop}, if non-@code{nil}, means that this
key sequence is being read by something that will read commands one
after another. It should be @code{nil} if the caller will read just
one key sequence.
In the following example, Emacs displays the prompt @samp{?} in the
echo area, and then the user types @kbd{C-x C-f}.
@example
(read-key-sequence "?")
@group
---------- Echo Area ----------
?@kbd{C-x C-f}
---------- Echo Area ----------
@result{} "^X^F"
@end group
@end example
The function @code{read-key-sequence} suppresses quitting: @kbd{C-g}
typed while reading with this function works like any other character,
and does not set @code{quit-flag}. @xref{Quitting}.
@end defun
@defun read-key-sequence-vector prompt &optional continue-echo dont-downcase-last switch-frame-ok command-loop
This is like @code{read-key-sequence} except that it always
returns the key sequence as a vector, never as a string.
@xref{Strings of Events}.
@end defun
@cindex upper case key sequence
@cindex downcasing in @code{lookup-key}
If an input character is upper-case (or has the shift modifier) and
has no key binding, but its lower-case equivalent has one, then
@code{read-key-sequence} converts the character to lower case. Note
that @code{lookup-key} does not perform case conversion in this way.
The function @code{read-key-sequence} also transforms some mouse events.
It converts unbound drag events into click events, and discards unbound
button-down events entirely. It also reshuffles focus events and
miscellaneous window events so that they never appear in a key sequence
with any other events.
@cindex @code{header-line} prefix key
@cindex @code{mode-line} prefix key
@cindex @code{vertical-line} prefix key
@cindex @code{horizontal-scroll-bar} prefix key
@cindex @code{vertical-scroll-bar} prefix key
@cindex @code{menu-bar} prefix key
@cindex mouse events, in special parts of frame
When mouse events occur in special parts of a window, such as a mode
line or a scroll bar, the event type shows nothing special---it is the
same symbol that would normally represent that combination of mouse
button and modifier keys. The information about the window part is kept
elsewhere in the event---in the coordinates. But
@code{read-key-sequence} translates this information into imaginary
``prefix keys,'' all of which are symbols: @code{header-line},
@code{horizontal-scroll-bar}, @code{menu-bar}, @code{mode-line},
@code{vertical-line}, and @code{vertical-scroll-bar}. You can define
meanings for mouse clicks in special window parts by defining key
sequences using these imaginary prefix keys.
For example, if you call @code{read-key-sequence} and then click the
mouse on the window's mode line, you get two events, like this:
@example
(read-key-sequence "Click on the mode line: ")
@result{} [mode-line
(mouse-1
(#<window 6 on NEWS> mode-line
(40 . 63) 5959987))]
@end example
@defvar num-input-keys
@c Emacs 19 feature
This variable's value is the number of key sequences processed so far in
this Emacs session. This includes key sequences read from the terminal
and key sequences read from keyboard macros being executed.
@end defvar
@node Reading One Event
@subsection Reading One Event
@cindex reading a single event
@cindex event, reading only one
The lowest level functions for command input are those that read a
single event.
None of the three functions below suppresses quitting.
@defun read-event &optional prompt inherit-input-method seconds
This function reads and returns the next event of command input, waiting
if necessary until an event is available. Events can come directly from
the user or from a keyboard macro.
If the optional argument @var{prompt} is non-@code{nil}, it should be a
string to display in the echo area as a prompt. Otherwise,
@code{read-event} does not display any message to indicate it is waiting
for input; instead, it prompts by echoing: it displays descriptions of
the events that led to or were read by the current command. @xref{The
Echo Area}.
If @var{inherit-input-method} is non-@code{nil}, then the current input
method (if any) is employed to make it possible to enter a
non-@acronym{ASCII} character. Otherwise, input method handling is disabled
for reading this event.
If @code{cursor-in-echo-area} is non-@code{nil}, then @code{read-event}
moves the cursor temporarily to the echo area, to the end of any message
displayed there. Otherwise @code{read-event} does not move the cursor.
If @var{seconds} is non-@code{nil}, it should be a number specifying
the maximum time to wait for input, in seconds. If no input arrives
within that time, @code{read-event} stops waiting and returns
@code{nil}. A floating-point value for @var{seconds} means to wait
for a fractional number of seconds. Some systems support only a whole
number of seconds; on these systems, @var{seconds} is rounded down.
If @var{seconds} is @code{nil}, @code{read-event} waits as long as
necessary for input to arrive.
If @var{seconds} is @code{nil}, Emacs is considered idle while waiting
for user input to arrive. Idle timers---those created with
@code{run-with-idle-timer} (@pxref{Idle Timers})---can run during this
period. However, if @var{seconds} is non-@code{nil}, the state of
idleness remains unchanged. If Emacs is non-idle when
@code{read-event} is called, it remains non-idle throughout the
operation of @code{read-event}; if Emacs is idle (which can happen if
the call happens inside an idle timer), it remains idle.
If @code{read-event} gets an event that is defined as a help character,
then in some cases @code{read-event} processes the event directly without
returning. @xref{Help Functions}. Certain other events, called
@dfn{special events}, are also processed directly within
@code{read-event} (@pxref{Special Events}).
Here is what happens if you call @code{read-event} and then press the
right-arrow function key:
@example
@group
(read-event)
@result{} right
@end group
@end example
@end defun
@defun read-char &optional prompt inherit-input-method seconds
This function reads and returns a character of command input. If the
user generates an event which is not a character (i.e. a mouse click or
function key event), @code{read-char} signals an error. The arguments
work as in @code{read-event}.
In the first example, the user types the character @kbd{1} (@acronym{ASCII}
code 49). The second example shows a keyboard macro definition that
calls @code{read-char} from the minibuffer using @code{eval-expression}.
@code{read-char} reads the keyboard macro's very next character, which
is @kbd{1}. Then @code{eval-expression} displays its return value in
the echo area.
@example
@group
(read-char)
@result{} 49
@end group
@group
;; @r{We assume here you use @kbd{M-:} to evaluate this.}
(symbol-function 'foo)
@result{} "^[:(read-char)^M1"
@end group
@group
(execute-kbd-macro 'foo)
@print{} 49
@result{} nil
@end group
@end example
@end defun
@defun read-char-exclusive &optional prompt inherit-input-method seconds
This function reads and returns a character of command input. If the
user generates an event which is not a character,
@code{read-char-exclusive} ignores it and reads another event, until it
gets a character. The arguments work as in @code{read-event}.
@end defun
@defvar num-nonmacro-input-events
This variable holds the total number of input events received so far
from the terminal---not counting those generated by keyboard macros.
@end defvar
@node Event Mod
@subsection Modifying and Translating Input Events
Emacs modifies every event it reads according to
@code{extra-keyboard-modifiers}, then translates it through
@code{keyboard-translate-table} (if applicable), before returning it
from @code{read-event}.
@c Emacs 19 feature
@defvar extra-keyboard-modifiers
This variable lets Lisp programs ``press'' the modifier keys on the
keyboard. The value is a character. Only the modifiers of the
character matter. Each time the user types a keyboard key, it is
altered as if those modifier keys were held down. For instance, if
you bind @code{extra-keyboard-modifiers} to @code{?\C-\M-a}, then all
keyboard input characters typed during the scope of the binding will
have the control and meta modifiers applied to them. The character
@code{?\C-@@}, equivalent to the integer 0, does not count as a control
character for this purpose, but as a character with no modifiers.
Thus, setting @code{extra-keyboard-modifiers} to zero cancels any
modification.
When using a window system, the program can ``press'' any of the
modifier keys in this way. Otherwise, only the @key{CTL} and @key{META}
keys can be virtually pressed.
Note that this variable applies only to events that really come from
the keyboard, and has no effect on mouse events or any other events.
@end defvar
@defvar keyboard-translate-table
This variable is the translate table for keyboard characters. It lets
you reshuffle the keys on the keyboard without changing any command
bindings. Its value is normally a char-table, or else @code{nil}.
(It can also be a string or vector, but this is considered obsolete.)
If @code{keyboard-translate-table} is a char-table
(@pxref{Char-Tables}), then each character read from the keyboard is
looked up in this char-table. If the value found there is
non-@code{nil}, then it is used instead of the actual input character.
Note that this translation is the first thing that happens to a
character after it is read from the terminal. Record-keeping features
such as @code{recent-keys} and dribble files record the characters after
translation.
Note also that this translation is done before the characters are
supplied to input methods (@pxref{Input Methods}). Use
@code{translation-table-for-input} (@pxref{Translation of Characters}),
if you want to translate characters after input methods operate.
@end defvar
@defun keyboard-translate from to
This function modifies @code{keyboard-translate-table} to translate
character code @var{from} into character code @var{to}. It creates
the keyboard translate table if necessary.
@end defun
Here's an example of using the @code{keyboard-translate-table} to
make @kbd{C-x}, @kbd{C-c} and @kbd{C-v} perform the cut, copy and paste
operations:
@example
(keyboard-translate ?\C-x 'control-x)
(keyboard-translate ?\C-c 'control-c)
(keyboard-translate ?\C-v 'control-v)
(global-set-key [control-x] 'kill-region)
(global-set-key [control-c] 'kill-ring-save)
(global-set-key [control-v] 'yank)
@end example
@noindent
On a graphical terminal that supports extended @acronym{ASCII} input,
you can still get the standard Emacs meanings of one of those
characters by typing it with the shift key. That makes it a different
character as far as keyboard translation is concerned, but it has the
same usual meaning.
@xref{Translation Keymaps}, for mechanisms that translate event sequences
at the level of @code{read-key-sequence}.
@node Invoking the Input Method
@subsection Invoking the Input Method
The event-reading functions invoke the current input method, if any
(@pxref{Input Methods}). If the value of @code{input-method-function}
is non-@code{nil}, it should be a function; when @code{read-event} reads
a printing character (including @key{SPC}) with no modifier bits, it
calls that function, passing the character as an argument.
@defvar input-method-function
If this is non-@code{nil}, its value specifies the current input method
function.
@strong{Warning:} don't bind this variable with @code{let}. It is often
buffer-local, and if you bind it around reading input (which is exactly
when you @emph{would} bind it), switching buffers asynchronously while
Emacs is waiting will cause the value to be restored in the wrong
buffer.
@end defvar
The input method function should return a list of events which should
be used as input. (If the list is @code{nil}, that means there is no
input, so @code{read-event} waits for another event.) These events are
processed before the events in @code{unread-command-events}
(@pxref{Event Input Misc}). Events
returned by the input method function are not passed to the input method
function again, even if they are printing characters with no modifier
bits.
If the input method function calls @code{read-event} or
@code{read-key-sequence}, it should bind @code{input-method-function} to
@code{nil} first, to prevent recursion.
The input method function is not called when reading the second and
subsequent events of a key sequence. Thus, these characters are not
subject to input method processing. The input method function should
test the values of @code{overriding-local-map} and
@code{overriding-terminal-local-map}; if either of these variables is
non-@code{nil}, the input method should put its argument into a list and
return that list with no further processing.
@node Quoted Character Input
@subsection Quoted Character Input
@cindex quoted character input
You can use the function @code{read-quoted-char} to ask the user to
specify a character, and allow the user to specify a control or meta
character conveniently, either literally or as an octal character code.
The command @code{quoted-insert} uses this function.
@defun read-quoted-char &optional prompt
@cindex octal character input
@cindex control characters, reading
@cindex nonprinting characters, reading
This function is like @code{read-char}, except that if the first
character read is an octal digit (0-7), it reads any number of octal
digits (but stopping if a non-octal digit is found), and returns the
character represented by that numeric character code. If the
character that terminates the sequence of octal digits is @key{RET},
it is discarded. Any other terminating character is used as input
after this function returns.
Quitting is suppressed when the first character is read, so that the
user can enter a @kbd{C-g}. @xref{Quitting}.
If @var{prompt} is supplied, it specifies a string for prompting the
user. The prompt string is always displayed in the echo area, followed
by a single @samp{-}.
In the following example, the user types in the octal number 177 (which
is 127 in decimal).
@example
(read-quoted-char "What character")
@group
---------- Echo Area ----------
What character @kbd{1 7 7}-
---------- Echo Area ----------
@result{} 127
@end group
@end example
@end defun
@need 2000
@node Event Input Misc
@subsection Miscellaneous Event Input Features
This section describes how to ``peek ahead'' at events without using
them up, how to check for pending input, and how to discard pending
input. See also the function @code{read-passwd} (@pxref{Reading a
Password}).
@defvar unread-command-events
@cindex next input
@cindex peeking at input
This variable holds a list of events waiting to be read as command
input. The events are used in the order they appear in the list, and
removed one by one as they are used.
The variable is needed because in some cases a function reads an event
and then decides not to use it. Storing the event in this variable
causes it to be processed normally, by the command loop or by the
functions to read command input.
@cindex prefix argument unreading
For example, the function that implements numeric prefix arguments reads
any number of digits. When it finds a non-digit event, it must unread
the event so that it can be read normally by the command loop.
Likewise, incremental search uses this feature to unread events with no
special meaning in a search, because these events should exit the search
and then execute normally.
The reliable and easy way to extract events from a key sequence so as to
put them in @code{unread-command-events} is to use
@code{listify-key-sequence} (@pxref{Strings of Events}).
Normally you add events to the front of this list, so that the events
most recently unread will be reread first.
Events read from this list are not normally added to the current
command's key sequence (as returned by e.g. @code{this-command-keys}),
as the events will already have been added once as they were read for
the first time. An element of the form @code{(@code{t} . @var{event})}
forces @var{event} to be added to the current command's key sequence.
@end defvar
@defun listify-key-sequence key
This function converts the string or vector @var{key} to a list of
individual events, which you can put in @code{unread-command-events}.
@end defun
@defvar unread-command-char
This variable holds a character to be read as command input.
A value of -1 means ``empty.''
This variable is mostly obsolete now that you can use
@code{unread-command-events} instead; it exists only to support programs
written for Emacs versions 18 and earlier.
@end defvar
@defun input-pending-p
@cindex waiting for command key input
This function determines whether any command input is currently
available to be read. It returns immediately, with value @code{t} if
there is available input, @code{nil} otherwise. On rare occasions it
may return @code{t} when no input is available.
@end defun
@defvar last-input-event
@defvarx last-input-char
This variable records the last terminal input event read, whether
as part of a command or explicitly by a Lisp program.
In the example below, the Lisp program reads the character @kbd{1},
@acronym{ASCII} code 49. It becomes the value of @code{last-input-event},
while @kbd{C-e} (we assume @kbd{C-x C-e} command is used to evaluate
this expression) remains the value of @code{last-command-event}.
@example
@group
(progn (print (read-char))
(print last-command-event)
last-input-event)
@print{} 49
@print{} 5
@result{} 49
@end group
@end example
The alias @code{last-input-char} exists for compatibility with
Emacs version 18.
@end defvar
@defmac while-no-input body@dots{}
This construct runs the @var{body} forms and returns the value of the
last one---but only if no input arrives. If any input arrives during
the execution of the @var{body} forms, it aborts them (working much
like a quit). The @code{while-no-input} form returns @code{nil} if
aborted by a real quit, and returns @code{t} if aborted by arrival of
other input.
If a part of @var{body} binds @code{inhibit-quit} to non-@code{nil},
arrival of input during those parts won't cause an abort until
the end of that part.
If you want to be able to distinguish all possible values computed
by @var{body} from both kinds of abort conditions, write the code
like this:
@example
(while-no-input
(list
(progn . @var{body})))
@end example
@end defmac
@defun discard-input
@cindex flushing input
@cindex discarding input
@cindex keyboard macro, terminating
This function discards the contents of the terminal input buffer and
cancels any keyboard macro that might be in the process of definition.
It returns @code{nil}.
In the following example, the user may type a number of characters right
after starting the evaluation of the form. After the @code{sleep-for}
finishes sleeping, @code{discard-input} discards any characters typed
during the sleep.
@example
(progn (sleep-for 2)
(discard-input))
@result{} nil
@end example
@end defun
@node Special Events
@section Special Events
@cindex special events
Special events are handled at a very low level---as soon as they are
read. The @code{read-event} function processes these events itself, and
never returns them. Instead, it keeps waiting for the first event
that is not special and returns that one.
Events that are handled in this way do not echo, they are never grouped
into key sequences, and they never appear in the value of
@code{last-command-event} or @code{(this-command-keys)}. They do not
discard a numeric argument, they cannot be unread with
@code{unread-command-events}, they may not appear in a keyboard macro,
and they are not recorded in a keyboard macro while you are defining
one.
These events do, however, appear in @code{last-input-event} immediately
after they are read, and this is the way for the event's definition to
find the actual event.
The events types @code{iconify-frame}, @code{make-frame-visible},
@code{delete-frame}, @code{drag-n-drop}, and user signals like
@code{sigusr1} are normally handled in this way. The keymap which
defines how to handle special events---and which events are special---is
in the variable @code{special-event-map} (@pxref{Active Keymaps}).
@node Waiting
@section Waiting for Elapsed Time or Input
@cindex waiting
The wait functions are designed to wait for a certain amount of time
to pass or until there is input. For example, you may wish to pause in
the middle of a computation to allow the user time to view the display.
@code{sit-for} pauses and updates the screen, and returns immediately if
input comes in, while @code{sleep-for} pauses without updating the
screen.
@defun sit-for seconds &optional nodisp
This function performs redisplay (provided there is no pending input
from the user), then waits @var{seconds} seconds, or until input is
available. The usual purpose of @code{sit-for} is to give the user
time to read text that you display. The value is @code{t} if
@code{sit-for} waited the full time with no input arriving
(@pxref{Event Input Misc}). Otherwise, the value is @code{nil}.
The argument @var{seconds} need not be an integer. If it is a floating
point number, @code{sit-for} waits for a fractional number of seconds.
Some systems support only a whole number of seconds; on these systems,
@var{seconds} is rounded down.
The expression @code{(sit-for 0)} is equivalent to @code{(redisplay)},
i.e. it requests a redisplay, without any delay, if there is no pending input.
@xref{Forcing Redisplay}.
If @var{nodisp} is non-@code{nil}, then @code{sit-for} does not
redisplay, but it still returns as soon as input is available (or when
the timeout elapses).
In batch mode (@pxref{Batch Mode}), @code{sit-for} cannot be
interrupted, even by input from the standard input descriptor. It is
thus equivalent to @code{sleep-for}, which is described below.
It is also possible to call @code{sit-for} with three arguments,
as @code{(sit-for @var{seconds} @var{millisec} @var{nodisp})},
but that is considered obsolete.
@end defun
@defun sleep-for seconds &optional millisec
This function simply pauses for @var{seconds} seconds without updating
the display. It pays no attention to available input. It returns
@code{nil}.
The argument @var{seconds} need not be an integer. If it is a floating
point number, @code{sleep-for} waits for a fractional number of seconds.
Some systems support only a whole number of seconds; on these systems,
@var{seconds} is rounded down.
The optional argument @var{millisec} specifies an additional waiting
period measured in milliseconds. This adds to the period specified by
@var{seconds}. If the system doesn't support waiting fractions of a
second, you get an error if you specify nonzero @var{millisec}.
Use @code{sleep-for} when you wish to guarantee a delay.
@end defun
@xref{Time of Day}, for functions to get the current time.
@node Quitting
@section Quitting
@cindex @kbd{C-g}
@cindex quitting
@cindex interrupt Lisp functions
Typing @kbd{C-g} while a Lisp function is running causes Emacs to
@dfn{quit} whatever it is doing. This means that control returns to the
innermost active command loop.
Typing @kbd{C-g} while the command loop is waiting for keyboard input
does not cause a quit; it acts as an ordinary input character. In the
simplest case, you cannot tell the difference, because @kbd{C-g}
normally runs the command @code{keyboard-quit}, whose effect is to quit.
However, when @kbd{C-g} follows a prefix key, they combine to form an
undefined key. The effect is to cancel the prefix key as well as any
prefix argument.
In the minibuffer, @kbd{C-g} has a different definition: it aborts out
of the minibuffer. This means, in effect, that it exits the minibuffer
and then quits. (Simply quitting would return to the command loop
@emph{within} the minibuffer.) The reason why @kbd{C-g} does not quit
directly when the command reader is reading input is so that its meaning
can be redefined in the minibuffer in this way. @kbd{C-g} following a
prefix key is not redefined in the minibuffer, and it has its normal
effect of canceling the prefix key and prefix argument. This too
would not be possible if @kbd{C-g} always quit directly.
When @kbd{C-g} does directly quit, it does so by setting the variable
@code{quit-flag} to @code{t}. Emacs checks this variable at appropriate
times and quits if it is not @code{nil}. Setting @code{quit-flag}
non-@code{nil} in any way thus causes a quit.
At the level of C code, quitting cannot happen just anywhere; only at the
special places that check @code{quit-flag}. The reason for this is
that quitting at other places might leave an inconsistency in Emacs's
internal state. Because quitting is delayed until a safe place, quitting
cannot make Emacs crash.
Certain functions such as @code{read-key-sequence} or
@code{read-quoted-char} prevent quitting entirely even though they wait
for input. Instead of quitting, @kbd{C-g} serves as the requested
input. In the case of @code{read-key-sequence}, this serves to bring
about the special behavior of @kbd{C-g} in the command loop. In the
case of @code{read-quoted-char}, this is so that @kbd{C-q} can be used
to quote a @kbd{C-g}.
@cindex preventing quitting
You can prevent quitting for a portion of a Lisp function by binding
the variable @code{inhibit-quit} to a non-@code{nil} value. Then,
although @kbd{C-g} still sets @code{quit-flag} to @code{t} as usual, the
usual result of this---a quit---is prevented. Eventually,
@code{inhibit-quit} will become @code{nil} again, such as when its
binding is unwound at the end of a @code{let} form. At that time, if
@code{quit-flag} is still non-@code{nil}, the requested quit happens
immediately. This behavior is ideal when you wish to make sure that
quitting does not happen within a ``critical section'' of the program.
@cindex @code{read-quoted-char} quitting
In some functions (such as @code{read-quoted-char}), @kbd{C-g} is
handled in a special way that does not involve quitting. This is done
by reading the input with @code{inhibit-quit} bound to @code{t}, and
setting @code{quit-flag} to @code{nil} before @code{inhibit-quit}
becomes @code{nil} again. This excerpt from the definition of
@code{read-quoted-char} shows how this is done; it also shows that
normal quitting is permitted after the first character of input.
@example
(defun read-quoted-char (&optional prompt)
"@dots{}@var{documentation}@dots{}"
(let ((message-log-max nil) done (first t) (code 0) char)
(while (not done)
(let ((inhibit-quit first)
@dots{})
(and prompt (message "%s-" prompt))
(setq char (read-event))
(if inhibit-quit (setq quit-flag nil)))
@r{@dots{}set the variable @code{code}@dots{}})
code))
@end example
@defvar quit-flag
If this variable is non-@code{nil}, then Emacs quits immediately, unless
@code{inhibit-quit} is non-@code{nil}. Typing @kbd{C-g} ordinarily sets
@code{quit-flag} non-@code{nil}, regardless of @code{inhibit-quit}.
@end defvar
@defvar inhibit-quit
This variable determines whether Emacs should quit when @code{quit-flag}
is set to a value other than @code{nil}. If @code{inhibit-quit} is
non-@code{nil}, then @code{quit-flag} has no special effect.
@end defvar
@defmac with-local-quit body@dots{}
This macro executes @var{body} forms in sequence, but allows quitting, at
least locally, within @var{body} even if @code{inhibit-quit} was
non-@code{nil} outside this construct. It returns the value of the
last form in @var{body}, unless exited by quitting, in which case
it returns @code{nil}.
If @code{inhibit-quit} is @code{nil} on entry to @code{with-local-quit},
it only executes the @var{body}, and setting @code{quit-flag} causes
a normal quit. However, if @code{inhibit-quit} is non-@code{nil} so
that ordinary quitting is delayed, a non-@code{nil} @code{quit-flag}
triggers a special kind of local quit. This ends the execution of
@var{body} and exits the @code{with-local-quit} body with
@code{quit-flag} still non-@code{nil}, so that another (ordinary) quit
will happen as soon as that is allowed. If @code{quit-flag} is
already non-@code{nil} at the beginning of @var{body}, the local quit
happens immediately and the body doesn't execute at all.
This macro is mainly useful in functions that can be called from
timers, process filters, process sentinels, @code{pre-command-hook},
@code{post-command-hook}, and other places where @code{inhibit-quit} is
normally bound to @code{t}.
@end defmac
@deffn Command keyboard-quit
This function signals the @code{quit} condition with @code{(signal 'quit
nil)}. This is the same thing that quitting does. (See @code{signal}
in @ref{Errors}.)
@end deffn
You can specify a character other than @kbd{C-g} to use for quitting.
See the function @code{set-input-mode} in @ref{Terminal Input}.
@node Prefix Command Arguments
@section Prefix Command Arguments
@cindex prefix argument
@cindex raw prefix argument
@cindex numeric prefix argument
Most Emacs commands can use a @dfn{prefix argument}, a number
specified before the command itself. (Don't confuse prefix arguments
with prefix keys.) The prefix argument is at all times represented by a
value, which may be @code{nil}, meaning there is currently no prefix
argument. Each command may use the prefix argument or ignore it.
There are two representations of the prefix argument: @dfn{raw} and
@dfn{numeric}. The editor command loop uses the raw representation
internally, and so do the Lisp variables that store the information, but
commands can request either representation.
Here are the possible values of a raw prefix argument:
@itemize @bullet
@item
@code{nil}, meaning there is no prefix argument. Its numeric value is
1, but numerous commands make a distinction between @code{nil} and the
integer 1.
@item
An integer, which stands for itself.
@item
A list of one element, which is an integer. This form of prefix
argument results from one or a succession of @kbd{C-u}'s with no
digits. The numeric value is the integer in the list, but some
commands make a distinction between such a list and an integer alone.
@item
The symbol @code{-}. This indicates that @kbd{M--} or @kbd{C-u -} was
typed, without following digits. The equivalent numeric value is
@minus{}1, but some commands make a distinction between the integer
@minus{}1 and the symbol @code{-}.
@end itemize
We illustrate these possibilities by calling the following function with
various prefixes:
@example
@group
(defun display-prefix (arg)
"Display the value of the raw prefix arg."
(interactive "P")
(message "%s" arg))
@end group
@end example
@noindent
Here are the results of calling @code{display-prefix} with various
raw prefix arguments:
@example
M-x display-prefix @print{} nil
C-u M-x display-prefix @print{} (4)
C-u C-u M-x display-prefix @print{} (16)
C-u 3 M-x display-prefix @print{} 3
M-3 M-x display-prefix @print{} 3 ; @r{(Same as @code{C-u 3}.)}
C-u - M-x display-prefix @print{} -
M-- M-x display-prefix @print{} - ; @r{(Same as @code{C-u -}.)}
C-u - 7 M-x display-prefix @print{} -7
M-- 7 M-x display-prefix @print{} -7 ; @r{(Same as @code{C-u -7}.)}
@end example
Emacs uses two variables to store the prefix argument:
@code{prefix-arg} and @code{current-prefix-arg}. Commands such as
@code{universal-argument} that set up prefix arguments for other
commands store them in @code{prefix-arg}. In contrast,
@code{current-prefix-arg} conveys the prefix argument to the current
command, so setting it has no effect on the prefix arguments for future
commands.
Normally, commands specify which representation to use for the prefix
argument, either numeric or raw, in the @code{interactive} specification.
(@xref{Using Interactive}.) Alternatively, functions may look at the
value of the prefix argument directly in the variable
@code{current-prefix-arg}, but this is less clean.
@defun prefix-numeric-value arg
This function returns the numeric meaning of a valid raw prefix argument
value, @var{arg}. The argument may be a symbol, a number, or a list.
If it is @code{nil}, the value 1 is returned; if it is @code{-}, the
value @minus{}1 is returned; if it is a number, that number is returned;
if it is a list, the @sc{car} of that list (which should be a number) is
returned.
@end defun
@defvar current-prefix-arg
This variable holds the raw prefix argument for the @emph{current}
command. Commands may examine it directly, but the usual method for
accessing it is with @code{(interactive "P")}.
@end defvar
@defvar prefix-arg
The value of this variable is the raw prefix argument for the
@emph{next} editing command. Commands such as @code{universal-argument}
that specify prefix arguments for the following command work by setting
this variable.
@end defvar
@defvar last-prefix-arg
The raw prefix argument value used by the previous command.
@end defvar
The following commands exist to set up prefix arguments for the
following command. Do not call them for any other reason.
@deffn Command universal-argument
This command reads input and specifies a prefix argument for the
following command. Don't call this command yourself unless you know
what you are doing.
@end deffn
@deffn Command digit-argument arg
This command adds to the prefix argument for the following command. The
argument @var{arg} is the raw prefix argument as it was before this
command; it is used to compute the updated prefix argument. Don't call
this command yourself unless you know what you are doing.
@end deffn
@deffn Command negative-argument arg
This command adds to the numeric argument for the next command. The
argument @var{arg} is the raw prefix argument as it was before this
command; its value is negated to form the new prefix argument. Don't
call this command yourself unless you know what you are doing.
@end deffn
@node Recursive Editing
@section Recursive Editing
@cindex recursive command loop
@cindex recursive editing level
@cindex command loop, recursive
The Emacs command loop is entered automatically when Emacs starts up.
This top-level invocation of the command loop never exits; it keeps
running as long as Emacs does. Lisp programs can also invoke the
command loop. Since this makes more than one activation of the command
loop, we call it @dfn{recursive editing}. A recursive editing level has
the effect of suspending whatever command invoked it and permitting the
user to do arbitrary editing before resuming that command.
The commands available during recursive editing are the same ones
available in the top-level editing loop and defined in the keymaps.
Only a few special commands exit the recursive editing level; the others
return to the recursive editing level when they finish. (The special
commands for exiting are always available, but they do nothing when
recursive editing is not in progress.)
All command loops, including recursive ones, set up all-purpose error
handlers so that an error in a command run from the command loop will
not exit the loop.
@cindex minibuffer input
Minibuffer input is a special kind of recursive editing. It has a few
special wrinkles, such as enabling display of the minibuffer and the
minibuffer window, but fewer than you might suppose. Certain keys
behave differently in the minibuffer, but that is only because of the
minibuffer's local map; if you switch windows, you get the usual Emacs
commands.
@cindex @code{throw} example
@kindex exit
@cindex exit recursive editing
@cindex aborting
To invoke a recursive editing level, call the function
@code{recursive-edit}. This function contains the command loop; it also
contains a call to @code{catch} with tag @code{exit}, which makes it
possible to exit the recursive editing level by throwing to @code{exit}
(@pxref{Catch and Throw}). If you throw a value other than @code{t},
then @code{recursive-edit} returns normally to the function that called
it. The command @kbd{C-M-c} (@code{exit-recursive-edit}) does this.
Throwing a @code{t} value causes @code{recursive-edit} to quit, so that
control returns to the command loop one level up. This is called
@dfn{aborting}, and is done by @kbd{C-]} (@code{abort-recursive-edit}).
Most applications should not use recursive editing, except as part of
using the minibuffer. Usually it is more convenient for the user if you
change the major mode of the current buffer temporarily to a special
major mode, which should have a command to go back to the previous mode.
(The @kbd{e} command in Rmail uses this technique.) Or, if you wish to
give the user different text to edit ``recursively,'' create and select
a new buffer in a special mode. In this mode, define a command to
complete the processing and go back to the previous buffer. (The
@kbd{m} command in Rmail does this.)
Recursive edits are useful in debugging. You can insert a call to
@code{debug} into a function definition as a sort of breakpoint, so that
you can look around when the function gets there. @code{debug} invokes
a recursive edit but also provides the other features of the debugger.
Recursive editing levels are also used when you type @kbd{C-r} in
@code{query-replace} or use @kbd{C-x q} (@code{kbd-macro-query}).
@defun recursive-edit
@cindex suspend evaluation
This function invokes the editor command loop. It is called
automatically by the initialization of Emacs, to let the user begin
editing. When called from a Lisp program, it enters a recursive editing
level.
If the current buffer is not the same as the selected window's buffer,
@code{recursive-edit} saves and restores the current buffer. Otherwise,
if you switch buffers, the buffer you switched to is current after
@code{recursive-edit} returns.
In the following example, the function @code{simple-rec} first
advances point one word, then enters a recursive edit, printing out a
message in the echo area. The user can then do any editing desired, and
then type @kbd{C-M-c} to exit and continue executing @code{simple-rec}.
@example
(defun simple-rec ()
(forward-word 1)
(message "Recursive edit in progress")
(recursive-edit)
(forward-word 1))
@result{} simple-rec
(simple-rec)
@result{} nil
@end example
@end defun
@deffn Command exit-recursive-edit
This function exits from the innermost recursive edit (including
minibuffer input). Its definition is effectively @code{(throw 'exit
nil)}.
@end deffn
@deffn Command abort-recursive-edit
This function aborts the command that requested the innermost recursive
edit (including minibuffer input), by signaling @code{quit}
after exiting the recursive edit. Its definition is effectively
@code{(throw 'exit t)}. @xref{Quitting}.
@end deffn
@deffn Command top-level
This function exits all recursive editing levels; it does not return a
value, as it jumps completely out of any computation directly back to
the main command loop.
@end deffn
@defun recursion-depth
This function returns the current depth of recursive edits. When no
recursive edit is active, it returns 0.
@end defun
@node Disabling Commands
@section Disabling Commands
@cindex disabled command
@dfn{Disabling a command} marks the command as requiring user
confirmation before it can be executed. Disabling is used for commands
which might be confusing to beginning users, to prevent them from using
the commands by accident.
@kindex disabled
The low-level mechanism for disabling a command is to put a
non-@code{nil} @code{disabled} property on the Lisp symbol for the
command. These properties are normally set up by the user's
init file (@pxref{Init File}) with Lisp expressions such as this:
@example
(put 'upcase-region 'disabled t)
@end example
@noindent
For a few commands, these properties are present by default (you can
remove them in your init file if you wish).
If the value of the @code{disabled} property is a string, the message
saying the command is disabled includes that string. For example:
@example
(put 'delete-region 'disabled
"Text deleted this way cannot be yanked back!\n")
@end example
@xref{Disabling,,, emacs, The GNU Emacs Manual}, for the details on
what happens when a disabled command is invoked interactively.
Disabling a command has no effect on calling it as a function from Lisp
programs.
@deffn Command enable-command command
Allow @var{command} (a symbol) to be executed without special
confirmation from now on, and alter the user's init file (@pxref{Init
File}) so that this will apply to future sessions.
@end deffn
@deffn Command disable-command command
Require special confirmation to execute @var{command} from now on, and
alter the user's init file so that this will apply to future sessions.
@end deffn
@defvar disabled-command-function
The value of this variable should be a function. When the user
invokes a disabled command interactively, this function is called
instead of the disabled command. It can use @code{this-command-keys}
to determine what the user typed to run the command, and thus find the
command itself.
The value may also be @code{nil}. Then all commands work normally,
even disabled ones.
By default, the value is a function that asks the user whether to
proceed.
@end defvar
@node Command History
@section Command History
@cindex command history
@cindex complex command
@cindex history of commands
The command loop keeps a history of the complex commands that have
been executed, to make it convenient to repeat these commands. A
@dfn{complex command} is one for which the interactive argument reading
uses the minibuffer. This includes any @kbd{M-x} command, any
@kbd{M-:} command, and any command whose @code{interactive}
specification reads an argument from the minibuffer. Explicit use of
the minibuffer during the execution of the command itself does not cause
the command to be considered complex.
@defvar command-history
This variable's value is a list of recent complex commands, each
represented as a form to evaluate. It continues to accumulate all
complex commands for the duration of the editing session, but when it
reaches the maximum size (@pxref{Minibuffer History}), the oldest
elements are deleted as new ones are added.
@example
@group
command-history
@result{} ((switch-to-buffer "chistory.texi")
(describe-key "^X^[")
(visit-tags-table "~/emacs/src/")
(find-tag "repeat-complex-command"))
@end group
@end example
@end defvar
This history list is actually a special case of minibuffer history
(@pxref{Minibuffer History}), with one special twist: the elements are
expressions rather than strings.
There are a number of commands devoted to the editing and recall of
previous commands. The commands @code{repeat-complex-command}, and
@code{list-command-history} are described in the user manual
(@pxref{Repetition,,, emacs, The GNU Emacs Manual}). Within the
minibuffer, the usual minibuffer history commands are available.
@node Keyboard Macros
@section Keyboard Macros
@cindex keyboard macros
A @dfn{keyboard macro} is a canned sequence of input events that can
be considered a command and made the definition of a key. The Lisp
representation of a keyboard macro is a string or vector containing the
events. Don't confuse keyboard macros with Lisp macros
(@pxref{Macros}).
@defun execute-kbd-macro kbdmacro &optional count loopfunc
This function executes @var{kbdmacro} as a sequence of events. If
@var{kbdmacro} is a string or vector, then the events in it are executed
exactly as if they had been input by the user. The sequence is
@emph{not} expected to be a single key sequence; normally a keyboard
macro definition consists of several key sequences concatenated.
If @var{kbdmacro} is a symbol, then its function definition is used in
place of @var{kbdmacro}. If that is another symbol, this process repeats.
Eventually the result should be a string or vector. If the result is
not a symbol, string, or vector, an error is signaled.
The argument @var{count} is a repeat count; @var{kbdmacro} is executed that
many times. If @var{count} is omitted or @code{nil}, @var{kbdmacro} is
executed once. If it is 0, @var{kbdmacro} is executed over and over until it
encounters an error or a failing search.
If @var{loopfunc} is non-@code{nil}, it is a function that is called,
without arguments, prior to each iteration of the macro. If
@var{loopfunc} returns @code{nil}, then this stops execution of the macro.
@xref{Reading One Event}, for an example of using @code{execute-kbd-macro}.
@end defun
@defvar executing-kbd-macro
This variable contains the string or vector that defines the keyboard
macro that is currently executing. It is @code{nil} if no macro is
currently executing. A command can test this variable so as to behave
differently when run from an executing macro. Do not set this variable
yourself.
@end defvar
@defvar defining-kbd-macro
This variable is non-@code{nil} if and only if a keyboard macro is
being defined. A command can test this variable so as to behave
differently while a macro is being defined. The value is
@code{append} while appending to the definition of an existing macro.
The commands @code{start-kbd-macro}, @code{kmacro-start-macro} and
@code{end-kbd-macro} set this variable---do not set it yourself.
The variable is always local to the current terminal and cannot be
buffer-local. @xref{Multiple Displays}.
@end defvar
@defvar last-kbd-macro
This variable is the definition of the most recently defined keyboard
macro. Its value is a string or vector, or @code{nil}.
The variable is always local to the current terminal and cannot be
buffer-local. @xref{Multiple Displays}.
@end defvar
@defvar kbd-macro-termination-hook
This normal hook (@pxref{Standard Hooks}) is run when a keyboard
macro terminates, regardless of what caused it to terminate (reaching
the macro end or an error which ended the macro prematurely).
@end defvar
@ignore
arch-tag: e34944ad-7d5c-4980-be00-36a5fe54d4b1
@end ignore