dnl Autoconf script for GNU Emacs
dnl To rebuild the `configure' script from this, execute the command
dnl autoconf
dnl in the directory containing this script.
dnl
dnl Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001
dnl Free Software Foundation, Inc.
dnl
dnl This file is part of GNU Emacs.
dnl
dnl GNU Emacs is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation; either version 2, or (at your option)
dnl any later version.
dnl
dnl GNU Emacs is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
dnl GNU General Public License for more details.
dnl
dnl You should have received a copy of the GNU General Public License
dnl along with GNU Emacs; see the file COPYING. If not, write to the
dnl Free Software Foundation, Inc., 59 Temple Place - Suite 330,
dnl Boston, MA 02111-1307, USA.
AC_PREREQ(2.8)dnl
AC_INIT(src/lisp.h)
AC_CONFIG_HEADER(src/config.h:src/config.in)
lispdir='${datadir}/emacs/${version}/lisp'
locallisppath='${datadir}/emacs/${version}/site-lisp:'\
'${datadir}/emacs/site-lisp:${datadir}/emacs/${version}/leim'
lisppath='${locallisppath}:${lispdir}'
etcdir='${datadir}/emacs/${version}/etc'
archlibdir='${libexecdir}/emacs/${version}/${configuration}'
docdir='${datadir}/emacs/${version}/etc'
AC_ARG_WITH(gcc,
[ --without-gcc don't use GCC to compile Emacs if GCC is found])
AC_ARG_WITH(pop,
[ --without-pop don't support POP mail retrieval with movemail],
[if test "$withval" = yes; then
AC_DEFINE(MAIL_USE_POP)
else :
fi],
AC_DEFINE(MAIL_USE_POP))
AC_ARG_WITH(kerberos,
[ --with-kerberos support Kerberos-authenticated POP],
[AC_DEFINE(KERBEROS)])
AC_ARG_WITH(kerberos5,
[ --with-kerberos5 support Kerberos version 5 authenticated POP],
[if test "${with_kerberos5+set}" = set; then
if test "${with_kerberos+set}" != set; then
with_kerberos=yes
AC_DEFINE(KERBEROS)
fi
fi
AC_DEFINE(KERBEROS5)])
AC_ARG_WITH(hesiod,
[ --with-hesiod support Hesiod to get the POP server host],
[AC_DEFINE(HESIOD)])
dnl This should be the last --with option, because --with-x is
dnl added later on when we find the path of X, and it's best to
dnl keep them together visually.
AC_ARG_WITH(x-toolkit,
[ --with-x-toolkit=KIT use an X toolkit (KIT = yes/lucid/athena/motif/no)],
[ case "${withval}" in
y | ye | yes ) val=athena ;;
n | no ) val=no ;;
l | lu | luc | luci | lucid ) val=lucid ;;
a | at | ath | athe | athen | athena ) val=athena ;;
m | mo | mot | moti | motif ) val=motif ;;
dnl These don't currently work.
dnl o | op | ope | open | open- | open-l | open-lo \
dnl | open-loo | open-look ) val=open-look ;;
* )
dnl AC_MSG_ERROR([the \`--with-x-toolkit' option is supposed to have a value
dnl which is \`yes', \`no', \`lucid', \`athena', \`motif' or \`open-look'.])
AC_MSG_ERROR([\`--with-x-toolkit=$withval' is invalid\;
this option's value should be \`yes', \`no', \`lucid', \`athena', or \`motif'.
Currently, \`yes', \`athena' and \`lucid' are synonyms.])
;;
esac
with_x_toolkit=$val
])
AC_ARG_WITH(xpm,
[ --with-xpm use -lXpm for displaying XPM images])
AC_ARG_WITH(jpeg,
[ --with-jpeg use -ljpeg for displaying JPEG images])
AC_ARG_WITH(tiff,
[ --with-tiff use -ltiff for displaying TIFF images])
AC_ARG_WITH(gif,
[ --with-gif use -lungif for displaying GIF images])
AC_ARG_WITH(png,
[ --with-png use -lpng for displaying PNG images])
AC_ARG_WITH(toolkit-scroll-bars,
[ --without-toolkit-scroll-bars
don't use Motif or Xaw3d scroll bars])
AC_ARG_WITH(xim,
[ --without-xim don't use X11 XIM])
#### Make srcdir absolute, if it isn't already. It's important to
#### avoid running the path through pwd unnecessarily, since pwd can
#### give you automounter prefixes, which can go away. We do all this
#### so Emacs can find its files when run uninstalled.
## Make sure CDPATH doesn't affect cd (in case PWD is relative).
unset CDPATH
case "${srcdir}" in
/* ) ;;
. )
## We may be able to use the $PWD environment variable to make this
## absolute. But sometimes PWD is inaccurate.
if test ".${PWD}" != "." && test ".`(cd ${PWD} ; sh -c pwd)`" = ".${PWD}" ;
then
srcdir="$PWD"
else
srcdir="`(cd ${srcdir}; pwd)`"
fi
;;
* ) srcdir="`(cd ${srcdir}; pwd)`" ;;
esac
#### Check if the source directory already has a configured system in it.
if test `pwd` != `(cd ${srcdir} && pwd)` \
&& test -f "${srcdir}/src/config.h" ; then
AC_MSG_WARN([The directory tree \`${srcdir}' is being used
as a build directory right now; it has been configured in its own
right. To configure in another directory as well, you MUST
use GNU make. If you do not have GNU make, then you must
now do \`make distclean' in ${srcdir},
and then run $0 again.])
changequote(, )dnl
extrasub='/^VPATH[ ]*=/c\
changequote([, ])dnl
vpath %.c $(srcdir)\
vpath %.h $(srcdir)\
vpath %.y $(srcdir)\
vpath %.l $(srcdir)\
vpath %.s $(srcdir)\
vpath %.in $(srcdir)\
vpath %.texi $(srcdir)'
fi
#### Given the configuration name, set machfile and opsysfile to the
#### names of the m/*.h and s/*.h files we should use.
### Canonicalize the configuration name.
AC_CANONICAL_HOST
canonical=$host
configuration=$host_alias
changequote(, )dnl
### If you add support for a new configuration, add code to this
### switch statement to recognize your configuration name and select
### the appropriate operating system and machine description files.
### You would hope that you could choose an m/*.h file pretty much
### based on the machine portion of the configuration name, and an s-
### file based on the operating system portion. However, it turns out
### that each m/*.h file is pretty manufacturer-specific - for
### example, apollo.h, hp9000s300.h, mega68k, news.h, and tad68k are
### all 68000 machines; mips.h, pmax.h, and news-risc are all MIPS
### machines. So we basically have to have a special case for each
### configuration name.
###
### As far as handling version numbers on operating systems is
### concerned, make sure things will fail in a fixable way. If
### /etc/MACHINES doesn't say anything about version numbers, be
### prepared to handle anything reasonably. If version numbers
### matter, be sure /etc/MACHINES says something about it.
###
### Eric Raymond says we should accept strings like "sysvr4" to mean
### "System V Release 4"; he writes, "The old convention encouraged
### confusion between `system' and `release' levels'."
machine='' opsys='' unported=no
case "${canonical}" in
## NetBSD ports
*-*-netbsd* )
opsys=netbsd
case "${canonical}" in
alpha*-*-netbsd*) machine=alpha ;;
i[3456]86-*-netbsd*) machine=intel386 ;;
m68k-*-netbsd*)
# This is somewhat bogus.
machine=hp9000s300 ;;
powerpc-apple-netbsd*) machine=macppc ;;
mips-*-netbsd*) machine=pmax ;;
mipsel-*-netbsd*) machine=pmax ;;
ns32k-*-netbsd*) machine=ns32000 ;;
powerpc-*-netbsd*) machine=macppc ;;
sparc*-*-netbsd*) machine=sparc ;;
vax-*-netbsd*) machine=vax ;;
arm-*-netbsd*) machine=arm ;;
esac
;;
## OpenBSD ports
*-*-openbsd* )
opsys=openbsd
case "${canonical}" in
alpha*-*-openbsd*) machine=alpha ;;
i386-*-openbsd*) machine=intel386 ;;
m68k-*-openbsd*) machine=hp9000s300 ;;
mipsel-*-openbsd*) machine=pmax ;;
ns32k-*-openbsd*) machine=ns32000 ;;
sparc-*-openbsd*) machine=sparc ;;
vax-*-openbsd*) machine=vax ;;
esac
;;
## Acorn RISCiX:
arm-acorn-riscix1.1* )
machine=acorn opsys=riscix1-1
;;
arm-acorn-riscix1.2* | arm-acorn-riscix )
## This name is riscix12 instead of riscix1.2
## to avoid a file name conflict on MSDOS.
machine=acorn opsys=riscix12
;;
## BSDI ports
*-*-bsdi* )
opsys=bsdi
case "${canonical}" in
i[345]86-*-bsdi*) machine=intel386 ;;
sparc-*-bsdi*) machine=sparc ;;
powerpc-*-bsdi*) machine=macppc ;;
esac
case "${canonical}" in
*-*-bsd386* | *-*-bsdi1* ) opsys=bsd386 ;;
*-*-bsdi2.0* ) opsys=bsdos2 ;;
*-*-bsdi2* ) opsys=bsdos2-1 ;;
*-*-bsdi3* ) opsys=bsdos3 ;;
*-*-bsdi[45]* ) opsys=bsdos4 ;;
esac
;;
## Alliant machines
## Strictly speaking, we need the version of the alliant operating
## system to choose the right machine file, but currently the
## configuration name doesn't tell us enough to choose the right
## one; we need to give alliants their own operating system name to
## do this right. When someone cares, they can help us.
fx80-alliant-* )
machine=alliant4 opsys=bsd4-2
;;
i860-alliant-* )
machine=alliant-2800 opsys=bsd4-3
;;
## Alpha (DEC) machines.
alpha*-dec-osf* )
machine=alpha opsys=osf1
# This is needed to find X11R6.1 libraries for certain tests.
NON_GCC_LINK_TEST_OPTIONS=-Wl,-rpath,/usr/X11R6/lib
GCC_LINK_TEST_OPTIONS=-Wl,-rpath,/usr/X11R6/lib
# NON_GNU_CPP is necessary on 5.0 to avoid mangling src/Makefile
# due to non-traditional preprocessing with the current compiler
# defaults. OSF 4 can also have that compiler version, and there
# seems always to have been a usable /usr/bin/cpp.
NON_GNU_CPP=/usr/bin/cpp
case "${canonical}" in
alpha*-dec-osf[5-9]*)
opsys=osf5-0 ;;
esac
;;
alpha*-*-linux-gnu* )
machine=alpha opsys=gnu-linux
;;
arm*-*-linux-gnu* )
machine=arm opsys=gnu-linux
;;
ppc-*-linux | \
powerpc-*-linux* )
machine=macppc opsys=gnu-linux
;;
## Altos 3068
m68*-altos-sysv* )
machine=altos opsys=usg5-2
;;
## Amdahl UTS
580-amdahl-sysv* )
machine=amdahl opsys=usg5-2-2
;;
## Apollo, Domain/OS
m68*-apollo-* )
machine=apollo opsys=bsd4-3
;;
## AT&T 3b2, 3b5, 3b15, 3b20
we32k-att-sysv* )
machine=att3b opsys=usg5-2-2
;;
## AT&T 3b1 - The Mighty Unix PC!
m68*-att-sysv* )
machine=7300 opsys=usg5-2-2
;;
## Bull dpx20
rs6000-bull-bosx* )
machine=ibmrs6000 opsys=aix3-2
;;
## Bull dpx2
m68*-bull-sysv3* )
machine=dpx2 opsys=usg5-3
;;
## Bull sps7
m68*-bull-sysv2* )
machine=sps7 opsys=usg5-2
;;
## CCI 5/32, 6/32 -- see "Tahoe".
## Celerity
## I don't know what configuration name to use for this; config.sub
## doesn't seem to know anything about it. Hey, Celerity users, get
## in touch with us!
celerity-celerity-bsd* )
machine=celerity opsys=bsd4-2
;;
## Clipper
## What operating systems does this chip run that Emacs has been
## tested on?
clipper-* )
machine=clipper
## We'll use the catch-all code at the bottom to guess the
## operating system.
;;
## Convex
*-convex-bsd* | *-convex-convexos* )
machine=convex opsys=bsd4-3
## Prevents spurious white space in makefiles - d.m.cooke@larc.nasa.gov
NON_GNU_CPP="cc -E -P"
;;
## Cubix QBx/386
i[3456]86-cubix-sysv* )
machine=intel386 opsys=usg5-3
;;
## Cydra 5
cydra*-cydrome-sysv* )
machine=cydra5 opsys=usg5-3
;;
## Data General AViiON Machines
## DG changed naming conventions with the release of 5.4.4.10, they
## dropped the initial 5.4 but left the intervening R. Because of the
## R this shouldn't conflict with older versions of the OS (which I
## think were named like dgux4.*). In addition, DG new AViiONs series
## uses either Motorola M88k or Intel Pentium CPUs.
m88k-dg-dguxR4.* | m88k-dg-dgux4* )
machine=aviion opsys=dgux4
;;
m88k-dg-dgux5.4R3* | m88k-dg-dgux5.4.3* )
## This name is dgux5-4-3 instead of dgux5-4r3
## to avoid a file name conflict on MSDOS.
machine=aviion opsys=dgux5-4-3
;;
m88k-dg-dgux5.4R2* | m88k-dg-dgux5.4.2* )
machine=aviion opsys=dgux5-4r2
;;
m88k-dg-dgux* )
machine=aviion opsys=dgux
;;
## Data General AViiON Intel (x86) Machines
## Exists from 5.4.3 (current i586-dg-dguxR4.11)
## Ehud Karni, 1998-may-30, ehud@unix.simonwiesel.co.il
i[345]86-dg-dguxR4* )
machine=aviion-intel opsys=dgux4
;;
## DECstations
mips-dec-ultrix[0-3].* | mips-dec-ultrix4.0* | mips-dec-bsd4.2* )
machine=pmax opsys=bsd4-2
;;
mips-dec-ultrix4.[12]* | mips-dec-bsd* )
machine=pmax opsys=bsd4-3
;;
mips-dec-ultrix* )
machine=pmax opsys=ultrix4-3
;;
mips-dec-osf* )
machine=pmax opsys=osf1
;;
mips-dec-mach_bsd4.3* )
machine=pmax opsys=mach-bsd4-3
;;
## Motorola Delta machines
m68k-motorola-sysv* | m68000-motorola-sysv* )
machine=delta opsys=usg5-3
if test -z "`type gnucc | grep 'not found'`"
then
if test -s /etc/167config
then CC="gnucc -m68040"
else CC="gnucc -m68881"
fi
else
if test -z "`type gcc | grep 'not found'`"
then CC=gcc
else CC=cc
fi
fi
;;
m88k-motorola-sysv4* )
# jbotte@bnr.ca says that UNIX_System_V <hostName> 4.0 R40V4.3 m88k mc88110
# needs POSIX_SIGNALS and therefore needs usg5-4-2.
# I hope there are not other 4.0 versions for this machine
# which really need usg5-4 instead.
machine=delta88k opsys=usg5-4-2
;;
m88k-motorola-sysv* | m88k-motorola-m88kbcs* )
machine=delta88k opsys=usg5-3
;;
## Dual machines
m68*-dual-sysv* )
machine=dual opsys=usg5-2
;;
m68*-dual-uniplus* )
machine=dual opsys=unipl5-2
;;
## Elxsi 6400
elxsi-elxsi-sysv* )
machine=elxsi opsys=usg5-2
;;
## Encore machines
ns16k-encore-bsd* )
machine=ns16000 opsys=umax
;;
## The GEC 63 - apparently, this port isn't really finished yet.
# I'm sure we finished off the last of the machines, though. -- fx
## Gould Power Node and NP1
pn-gould-bsd4.2* )
machine=gould opsys=bsd4-2
;;
pn-gould-bsd4.3* )
machine=gould opsys=bsd4-3
;;
np1-gould-bsd* )
machine=gould-np1 opsys=bsd4-3
;;
## Harris Night Hawk machines running CX/UX (a 5000 looks just like a 4000
## as far as Emacs is concerned).
m88k-harris-cxux* )
# Build needs to be different on 7.0 and later releases
case "`uname -r`" in
[56].[0-9] ) machine=nh4000 opsys=cxux ;;
[7].[0-9] ) machine=nh4000 opsys=cxux7 ;;
esac
NON_GNU_CPP="/lib/cpp"
;;
## Harris ecx or gcx running CX/UX (Series 1200, Series 3000)
m68k-harris-cxux* )
machine=nh3000 opsys=cxux
;;
## Harris power pc NightHawk running Power UNIX (Series 6000)
powerpc-harris-powerunix )
machine=nh6000 opsys=powerunix
NON_GNU_CPP="cc -Xo -E -P"
;;
## SR2001/SR2201 running HI-UX/MPP
hppa1.1-hitachi-hiuxmpp* )
machine=sr2k opsys=hiuxmpp
;;
hppa1.1-hitachi-hiuxwe2* )
machine=sr2k opsys=hiuxwe2
;;
## Honeywell XPS100
xps*-honeywell-sysv* )
machine=xps100 opsys=usg5-2
;;
## HP 9000 series 200 or 300
m68*-hp-bsd* )
machine=hp9000s300 opsys=bsd4-3
;;
## HP/UX 7, 8, 9, and 10 are supported on these machines.
m68*-hp-hpux* )
case "`uname -r`" in
## Someone's system reports A.B8.05 for this.
## I wonder what other possibilities there are.
*.B8.* ) machine=hp9000s300 opsys=hpux8 ;;
*.08.* ) machine=hp9000s300 opsys=hpux8 ;;
*.09.* ) machine=hp9000s300 opsys=hpux9 ;;
*.1[0-9].* ) machine=hp9000s300 opsys=hpux9shr ;;
*) machine=hp9000s300 opsys=hpux ;;
esac
;;
## HP 9000 series 700 and 800, running HP/UX
hppa*-hp-hpux7* )
machine=hp800 opsys=hpux
;;
hppa*-hp-hpux8* )
machine=hp800 opsys=hpux8
;;
hppa*-hp-hpux9shr* )
machine=hp800 opsys=hpux9shr
;;
hppa*-hp-hpux9* )
machine=hp800 opsys=hpux9
;;
hppa*-hp-hpux10* )
machine=hp800 opsys=hpux10
;;
hppa*-hp-hpux1[1-9]* )
machine=hp800 opsys=hpux11
;;
## HP 9000 series 700 and 800, running HP/UX
hppa*-hp-hpux* )
## Cross-compilation? Nah!
case "`uname -r`" in
## Someone's system reports A.B8.05 for this.
## I wonder what other possibilities there are.
*.B8.* ) machine=hp800 opsys=hpux8 ;;
*.08.* ) machine=hp800 opsys=hpux8 ;;
*.09.* ) machine=hp800 opsys=hpux9 ;;
*) machine=hp800 opsys=hpux10 ;;
esac
;;
hppa*-*-nextstep* )
machine=hp800 opsys=nextstep
;;
## Mac OS X Server
*-*-rhapsody*)
opsys=rhapsody
case "${canonical}" in
powerpc-*-rhapsody*) machine=powermacintosh ;;
i386-*-rhapsody*) machine=intel386 ;;
esac
;;
## Darwin / Mac OS X
*-*-darwin*)
opsys=darwin
case "${canonical}" in
powerpc-*-darwin*) machine=powermacintosh ;;
i?86-*-darwin*) machine=intel386 ;;
esac
;;
## Orion machines
orion-orion-bsd* )
machine=orion opsys=bsd4-2
;;
clipper-orion-bsd* )
machine=orion105 opsys=bsd4-2
;;
## IBM machines
i[3456]86-ibm-aix1.1* )
machine=ibmps2-aix opsys=usg5-2-2
;;
i[3456]86-ibm-aix1.[23]* | i[3456]86-ibm-aix* )
machine=ibmps2-aix opsys=usg5-3
;;
i370-ibm-aix*)
machine=ibm370aix opsys=usg5-3
;;
rs6000-ibm-aix3.1* | powerpc-ibm-aix3.1* )
machine=ibmrs6000 opsys=aix3-1
;;
rs6000-ibm-aix3.2.5 | powerpc-ibm-aix3.2.5 )
machine=ibmrs6000 opsys=aix3-2-5
;;
rs6000-ibm-aix4.1* | powerpc-ibm-aix4.1* )
machine=ibmrs6000 opsys=aix4-1
;;
rs6000-ibm-aix4.2* | powerpc-ibm-aix4.2* )
machine=ibmrs6000 opsys=aix4-2
;;
rs6000-ibm-aix5.1* | powerpc-ibm-aix5.1* )
machine=ibmrs6000 opsys=aix4-2
;;
rs6000-ibm-aix4.0* | powerpc-ibm-aix4.0* )
machine=ibmrs6000 opsys=aix4
;;
rs6000-ibm-aix4* | powerpc-ibm-aix4* )
machine=ibmrs6000 opsys=aix4-1
;;
rs6000-ibm-aix* | powerpc-ibm-aix* )
machine=ibmrs6000 opsys=aix3-2
;;
romp-ibm-bsd4.3* )
machine=ibmrt opsys=bsd4-3
;;
romp-ibm-bsd4.2* )
machine=ibmrt opsys=bsd4-2
;;
romp-ibm-aos4.3* )
machine=ibmrt opsys=bsd4-3
;;
romp-ibm-aos4.2* )
machine=ibmrt opsys=bsd4-2
;;
romp-ibm-aos* )
machine=ibmrt opsys=bsd4-3
;;
romp-ibm-bsd* )
machine=ibmrt opsys=bsd4-3
;;
romp-ibm-aix* )
machine=ibmrt-aix opsys=usg5-2-2
;;
## Integrated Solutions `Optimum V'
m68*-isi-bsd4.2* )
machine=isi-ov opsys=bsd4-2
;;
m68*-isi-bsd4.3* )
machine=isi-ov opsys=bsd4-3
;;
## Intel 386 machines where we do care about the manufacturer
i[3456]86-intsys-sysv* )
machine=is386 opsys=usg5-2-2
;;
## Prime EXL
i[3456]86-prime-sysv* )
machine=i386 opsys=usg5-3
;;
## Sequent Symmetry running Dynix
i[3456]86-sequent-bsd* )
machine=symmetry opsys=bsd4-3
;;
## Sequent Symmetry running ptx 4, which is a modified SVR4.
i[3456]86-sequent-ptx4* | i[3456]86-sequent-sysv4* )
machine=sequent-ptx opsys=ptx4
NON_GNU_CPP=/lib/cpp
;;
## Sequent Symmetry running DYNIX/ptx
## Use the old cpp rather than the newer ANSI one.
i[3456]86-sequent-ptx* )
machine=sequent-ptx opsys=ptx
NON_GNU_CPP="/lib/cpp"
;;
## ncr machine running svr4.3.
i[3456]86-ncr-sysv4.3 )
machine=ncr386 opsys=usg5-4-3
;;
## Unspecified sysv on an ncr machine defaults to svr4.2.
## (Plain usg5-4 doesn't turn on POSIX signals, which we need.)
i[3456]86-ncr-sysv* )
machine=ncr386 opsys=usg5-4-2
;;
## Intel Paragon OSF/1
i860-intel-osf1* )
machine=paragon opsys=osf1 NON_GNU_CPP=/usr/mach/lib/cpp
;;
## Intel 860
i860-*-sysv4* )
machine=i860 opsys=usg5-4
NON_GNU_CC="/bin/cc" # Ie, not the one in /usr/ucb/cc.
NON_GNU_CPP="/usr/ccs/lib/cpp" # cc -E tokenizes macro expansion.
;;
## Macintosh PowerPC
powerpc*-*-linux-gnu* )
machine=macppc opsys=gnu-linux
;;
## Masscomp machines
m68*-masscomp-rtu* )
machine=masscomp opsys=rtu
;;
## Megatest machines
m68*-megatest-bsd* )
machine=mega68 opsys=bsd4-2
;;
## Workstations sold by MIPS
## This is not necessarily all workstations using the MIPS processor -
## Irises are produced by SGI, and DECstations by DEC.
## etc/MACHINES lists mips.h and mips4.h as possible machine files,
## and usg5-2-2 and bsd4-3 as possible OS files. The only guidance
## it gives for choosing between the alternatives seems to be "Use
## -machine=mips4 for RISCOS version 4; use -opsystem=bsd4-3 with
## the BSD world." I'll assume that these are instructions for
## handling two odd situations, and that every other situation
## should use mips.h and usg5-2-2, they being listed first.
mips-mips-usg* )
machine=mips4
## Fall through to the general code at the bottom to decide on the OS.
;;
mips-mips-riscos4* )
machine=mips4 opsys=bsd4-3
NON_GNU_CC="cc -systype bsd43"
NON_GNU_CPP="cc -systype bsd43 -E"
;;
mips-mips-riscos5* )
machine=mips4 opsys=riscos5
NON_GNU_CC="cc -systype bsd43"
NON_GNU_CPP="cc -systype bsd43 -E"
;;
mips-mips-bsd* )
machine=mips opsys=bsd4-3
;;
mips-mips-* )
machine=mips opsys=usg5-2-2
;;
## NeXT
m68*-next-* | m68k-*-nextstep* )
machine=m68k opsys=nextstep
;;
## The complete machine from National Semiconductor
ns32k-ns-genix* )
machine=ns32000 opsys=usg5-2
;;
## NCR machines
m68*-ncr-sysv2* | m68*-ncr-sysvr2* )
machine=tower32 opsys=usg5-2-2
;;
m68*-ncr-sysv3* | m68*-ncr-sysvr3* )
machine=tower32v3 opsys=usg5-3
;;
## NEC EWS4800
mips-nec-sysv4*)
machine=ews4800 opsys=ux4800
;;
## Nixdorf Targon 31
m68*-nixdorf-sysv* )
machine=targon31 opsys=usg5-2-2
;;
## Nu (TI or LMI)
m68*-nu-sysv* )
machine=nu opsys=usg5-2
;;
## Plexus
m68*-plexus-sysv* )
machine=plexus opsys=usg5-2
;;
## PowerPC reference platform
powerpcle-*-solaris2* )
machine=prep
opsys=sol2-5
;;
## Pyramid machines
## I don't really have any idea what sort of processor the Pyramid has,
## so I'm assuming it is its own architecture.
pyramid-pyramid-bsd* )
machine=pyramid opsys=bsd4-2
;;
## Sequent Balance
ns32k-sequent-bsd4.2* )
machine=sequent opsys=bsd4-2
;;
ns32k-sequent-bsd4.3* )
machine=sequent opsys=bsd4-3
;;
## Siemens Nixdorf
mips-siemens-sysv* | mips-sni-sysv*)
machine=mips-siemens opsys=usg5-4
NON_GNU_CC=/usr/ccs/bin/cc
NON_GNU_CPP=/usr/ccs/lib/cpp
;;
## Silicon Graphics machines
## Iris 2500 and Iris 2500 Turbo (aka the Iris 3030)
m68*-sgi-iris3.5* )
machine=irist opsys=iris3-5
;;
m68*-sgi-iris3.6* | m68*-sgi-iris*)
machine=irist opsys=iris3-6
;;
## Iris 4D
mips-sgi-irix3* )
machine=iris4d opsys=irix3-3
;;
mips-sgi-irix4* )
machine=iris4d opsys=irix4-0
;;
mips-sgi-irix6.5 )
machine=iris4d opsys=irix6-5
# Without defining _LANGUAGE_C, things get masked out in the headers
# so that, for instance, grepping for `free' in stdlib.h fails and
# AC_HEADER_STD_C fails. (MIPSPro 7.2.1.2m compilers, Irix 6.5.3m).
NON_GNU_CPP="/lib/cpp -D_LANGUAGE_C"
NON_GCC_TEST_OPTIONS="-D_LANGUAGE_C"
;;
mips-sgi-irix6* )
machine=iris4d opsys=irix6-0
# It's not clear whether -D_LANGUAGE_C is necessary as it is for 6.5,
# but presumably it does no harm.
NON_GNU_CPP="/lib/cpp -D_LANGUAGE_C"
# -32 probably isn't necessary in later v.6s -- anyone know which?
NON_GCC_TEST_OPTIONS=-32
;;
mips-sgi-irix5.[01]* )
machine=iris4d opsys=irix5-0
;;
mips-sgi-irix5* | mips-sgi-irix* )
machine=iris4d opsys=irix5-2
;;
## SONY machines
m68*-sony-bsd4.2* )
machine=news opsys=bsd4-2
;;
m68*-sony-bsd4.3* )
machine=news opsys=bsd4-3
;;
m68*-sony-newsos3* | m68*-sony-news3*)
machine=news opsys=bsd4-3
;;
mips-sony-bsd* | mips-sony-newsos4* | mips-sony-news4*)
machine=news-risc opsys=bsd4-3
;;
mips-sony-newsos6* )
machine=news-r6 opsys=newsos6
;;
mips-sony-news* )
machine=news-risc opsys=newsos5
;;
## Stride
m68*-stride-sysv* )
machine=stride opsys=usg5-2
;;
## Suns
sparc-*-linux-gnu* | sparc64-*-linux-gnu* )
machine=sparc opsys=gnu-linux
;;
*-auspex-sunos* | *-sun-sunos* | *-sun-bsd* | *-sun-solaris* \
| i[3456]86-*-solaris2* | i[3456]86-*-sunos5* | powerpc*-*-solaris2* \
| rs6000-*-solaris2*)
case "${canonical}" in
m68*-sunos1* ) machine=sun1 ;;
m68*-sunos2* ) machine=sun2 ;;
m68* ) machine=sun3 ;;
i[3456]86-sun-sunos[34]* ) machine=sun386 ;;
i[3456]86-*-* ) machine=intel386 ;;
powerpcle* ) machine=powerpcle ;;
powerpc* | rs6000* ) machine=ibmrs6000 ;;
sparc* ) machine=sparc ;;
* ) unported=yes ;;
esac
case "${canonical}" in
## The Sun386 didn't get past 4.0.
i[3456]86-*-sunos4 ) opsys=sunos4-0 ;;
*-sunos4.0* ) opsys=sunos4-0 ;;
*-sunos4.1.[3-9]*noshare )
## This name is sunos413 instead of sunos4-1-3
## to avoid a file name conflict on MSDOS.
opsys=sunos413
NON_GNU_CPP=/usr/lib/cpp
NON_GCC_TEST_OPTIONS=-Bstatic
GCC_TEST_OPTIONS=-static
;;
*-sunos4.1.[3-9]* | *-sunos4shr*)
opsys=sunos4shr
NON_GNU_CPP=/usr/lib/cpp
;;
*-sunos4* | *-sunos )
opsys=sunos4-1
NON_GCC_TEST_OPTIONS=-Bstatic
GCC_TEST_OPTIONS=-static
;;
*-sunos5.3* | *-solaris2.3* )
opsys=sol2-3
NON_GNU_CPP=/usr/ccs/lib/cpp
;;
*-sunos5.4* | *-solaris2.4* )
opsys=sol2-4
NON_GNU_CPP=/usr/ccs/lib/cpp
RANLIB="ar -ts"
;;
*-sunos5.5* | *-solaris2.5* )
opsys=sol2-5
NON_GNU_CPP=/usr/ccs/lib/cpp
RANLIB="ar -ts"
;;
*-sunos5* | *-solaris* )
opsys=sol2-5
NON_GNU_CPP=/usr/ccs/lib/cpp
;;
* ) opsys=bsd4-2 ;;
esac
## Watch out for a compiler that we know will not work.
case "${canonical}" in
*-solaris* | *-sunos5* )
if [ "x$CC" = x/usr/ucb/cc ]; then
## /usr/ucb/cc doesn't work;
## we should find some other compiler that does work.
unset CC
fi
;;
*) ;;
esac
;;
sparc-*-nextstep* )
machine=sparc opsys=nextstep
;;
## Tadpole 68k
m68*-tadpole-sysv* )
machine=tad68k opsys=usg5-3
;;
## Tahoe machines
tahoe-tahoe-bsd4.2* )
machine=tahoe opsys=bsd4-2
;;
tahoe-tahoe-bsd4.3* )
machine=tahoe opsys=bsd4-3
;;
## Tandem Integrity S2
mips-tandem-sysv* )
machine=tandem-s2 opsys=usg5-3
;;
## Tektronix XD88
m88k-tektronix-sysv3* )
machine=tekxd88 opsys=usg5-3
;;
## Tektronix 16000 box (6130?)
ns16k-tektronix-bsd* )
machine=ns16000 opsys=bsd4-2
;;
## Tektronix 4300
## src/m/tek4300.h hints that this is a m68k machine.
m68*-tektronix-bsd* )
machine=tek4300 opsys=bsd4-3
;;
## Titan P2 or P3
## We seem to have lost the machine-description file titan.h!
titan-titan-sysv* )
machine=titan opsys=usg5-3
;;
## Ustation E30 (SS5E)
m68*-unisys-uniplus* )
machine=ustation opsystem=unipl5-2
;;
## Vaxen.
vax-dec-* )
machine=vax
case "${canonical}" in
*-bsd4.1* ) opsys=bsd4-1 ;;
*-bsd4.2* | *-ultrix[0-3].* | *-ultrix4.0* ) opsys=bsd4-2 ;;
*-bsd4.3* | *-ultrix* ) opsys=bsd4-3 ;;
*-sysv[01]* | *-sysvr[01]* ) opsys=usg5-0 ;;
*-sysv2* | *-sysvr2* ) opsys=usg5-2 ;;
*-vms* ) opsys=vms ;;
* ) unported=yes
esac
;;
## Whitechapel MG1
ns16k-whitechapel-* )
machine=mg1
## We don't know what sort of OS runs on these; we'll let the
## operating system guessing code below try.
;;
## Wicat
m68*-wicat-sysv* )
machine=wicat opsys=usg5-2
;;
## IA-64
ia64*-*-linux* )
machine=ia64 opsys=gnu-linux
;;
## Intel 386 machines where we don't care about the manufacturer
i[3456]86-*-* )
machine=intel386
case "${canonical}" in
*-lynxos* ) opsys=lynxos ;;
*-isc1.* | *-isc2.[01]* ) opsys=386-ix ;;
*-isc2.2* ) opsys=isc2-2 ;;
*-isc4.0* ) opsys=isc4-0 ;;
*-isc4.* ) opsys=isc4-1
GCC_TEST_OPTIONS=-posix
NON_GCC_TEST_OPTIONS=-Xp
;;
*-isc* ) opsys=isc3-0 ;;
*-esix5* ) opsys=esix5r4; NON_GNU_CPP=/usr/lib/cpp ;;
*-esix* ) opsys=esix ;;
*-xenix* ) opsys=xenix ;;
*-linux-gnu* ) opsys=gnu-linux ;;
*-sco3.2v4* ) opsys=sco4 ; NON_GNU_CPP=/lib/cpp ;;
*-sco3.2v5* ) opsys=sco5
NON_GNU_CPP=/lib/cpp
# Prevent -belf from being passed to $CPP.
# /lib/cpp does not accept it.
OVERRIDE_CPPFLAGS=" "
;;
*-sysv4.2uw* ) opsys=unixware; NON_GNU_CPP=/lib/cpp ;;
*-386bsd* ) opsys=386bsd ;;
*-freebsd* ) opsys=freebsd ;;
*-nextstep* ) opsys=nextstep ;;
## Otherwise, we'll fall through to the generic opsys code at the bottom.
esac
;;
## m68k Linux-based GNU system
m68k-*-linux-gnu* )
machine=m68k opsys=gnu-linux
;;
## Mips Linux-based GNU system
mips-*-linux-gnu* )
machine=mips opsys=gnu-linux
;;
## UXP/DS
sparc-fujitsu-sysv4* )
machine=sparc opsys=uxpds
NON_GNU_CPP=/usr/ccs/lib/cpp
RANLIB="ar -ts"
;;
## UXP/V
f301-fujitsu-uxpv4.1)
machine=f301 opsys=uxpv
;;
* )
unported=yes
;;
esac
### If the code above didn't choose an operating system, just choose
### an operating system based on the configuration name. You really
### only want to use this when you have no idea what the right
### operating system is; if you know what operating systems a machine
### runs, it's cleaner to make it explicit in the case statement
### above.
if test x"${opsys}" = x; then
case "${canonical}" in
*-gnu* ) opsys=gnu ;;
*-bsd4.[01] ) opsys=bsd4-1 ;;
*-bsd4.2 ) opsys=bsd4-2 ;;
*-bsd4.3 ) opsys=bsd4-3 ;;
*-sysv0 | *-sysvr0 ) opsys=usg5-0 ;;
*-sysv2 | *-sysvr2 ) opsys=usg5-2 ;;
*-sysv2.2 | *-sysvr2.2 ) opsys=usg5-2-2 ;;
*-sysv3* | *-sysvr3* ) opsys=usg5-3 ;;
*-sysv4.2uw* ) opsys=unixware ;;
*-sysv4.1* | *-sysvr4.1* )
NON_GNU_CPP=/usr/lib/cpp
opsys=usg5-4 ;;
*-sysv4.[2-9]* | *-sysvr4.[2-9]* )
if [ x$NON_GNU_CPP = x ]; then
if [ -f /usr/ccs/lib/cpp ]; then
NON_GNU_CPP=/usr/ccs/lib/cpp
else
NON_GNU_CPP=/lib/cpp
fi
fi
opsys=usg5-4-2 ;;
*-sysv4* | *-sysvr4* ) opsys=usg5-4 ;;
* )
unported=yes
;;
esac
fi
changequote([, ])dnl
if test $unported = yes; then
AC_MSG_ERROR([Emacs hasn't been ported to \`${canonical}' systems.
Check \`etc/MACHINES' for recognized configuration names.])
fi
machfile="m/${machine}.h"
opsysfile="s/${opsys}.h"
#### Choose a compiler.
test -n "$CC" && cc_specified=yes
# Save the value of CFLAGS that the user specified.
SPECIFIED_CFLAGS="$CFLAGS"
case ${with_gcc} in
"yes" ) CC="gcc" GCC=yes ;;
"no" ) : ${CC=cc} ;;
* ) AC_PROG_CC
esac
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
#### Some systems specify a CPP to use unless we are using GCC.
#### Now that we know whether we are using GCC, we can decide whether
#### to use that one.
if test "x$NON_GNU_CPP" != x && test x$GCC != xyes && test "x$CPP" = x
then
CPP="$NON_GNU_CPP"
fi
#### Some systems specify a CC to use unless we are using GCC.
#### Now that we know whether we are using GCC, we can decide whether
#### to use that one.
if test "x$NON_GNU_CC" != x && test x$GCC != xyes &&
test x$cc_specified != xyes
then
CC="$NON_GNU_CC"
fi
if test x$GCC = xyes && test "x$GCC_TEST_OPTIONS" != x
then
CC="$CC $GCC_TEST_OPTIONS"
fi
if test x$GCC = x && test "x$NON_GCC_TEST_OPTIONS" != x
then
CC="$CC $NON_GCC_TEST_OPTIONS"
fi
if test x$GCC = xyes && test "x$GCC_LINK_TEST_OPTIONS" != x
then
ac_link="$ac_link $GCC_LINK_TEST_OPTIONS"
fi
if test x$GCC = x && test "x$NON_GCC_LINK_TEST_OPTIONS" != x
then
ac_link="$ac_link $NON_GCC_LINK_TEST_OPTIONS"
fi
#### Some other nice autoconf tests. If you add a test here which
#### should make an entry in src/config.h, don't forget to add an
#### #undef clause to src/config.h.in for autoconf to modify.
dnl checks for programs
AC_PROG_LN_S
AC_PROG_CPP
AC_PROG_INSTALL
AC_PROG_YACC
if test "x$RANLIB" = x; then
AC_PROG_RANLIB
fi
dnl checks for Unix variants
AC_AIX
#### Extract some information from the operating system and machine files.
AC_CHECKING([the machine- and system-dependent files to find out
- which libraries the lib-src programs will want, and
- whether the GNU malloc routines are usable])
### First figure out CFLAGS (which we use for running the compiler here)
### and REAL_CFLAGS (which we use for real compilation).
### The two are the same except on a few systems, where they are made
### different to work around various lossages. For example,
### GCC 2.5 on GNU/Linux needs them to be different because it treats -g
### as implying static linking.
### If the CFLAGS env var is specified, we use that value
### instead of the default.
### It's not important that this name contain the PID; you can't run
### two configures in the same directory and have anything work
### anyway.
tempcname="conftest.c"
echo '
#include "'${srcdir}'/src/'${opsysfile}'"
#include "'${srcdir}'/src/'${machfile}'"
#ifndef LIBS_MACHINE
#define LIBS_MACHINE
#endif
#ifndef LIBS_SYSTEM
#define LIBS_SYSTEM
#endif
#ifndef C_SWITCH_SYSTEM
#define C_SWITCH_SYSTEM
#endif
#ifndef C_SWITCH_MACHINE
#define C_SWITCH_MACHINE
#endif
configure___ libsrc_libs=LIBS_MACHINE LIBS_SYSTEM
configure___ c_switch_system=C_SWITCH_SYSTEM
configure___ c_switch_machine=C_SWITCH_MACHINE
#ifndef LIB_X11_LIB
#define LIB_X11_LIB -lX11
#endif
#ifndef LIBX11_MACHINE
#define LIBX11_MACHINE
#endif
#ifndef LIBX11_SYSTEM
#define LIBX11_SYSTEM
#endif
configure___ LIBX=LIB_X11_LIB LIBX11_MACHINE LIBX11_SYSTEM
#ifdef UNEXEC
configure___ unexec=UNEXEC
#else
configure___ unexec=unexec.o
#endif
#ifdef SYSTEM_MALLOC
configure___ system_malloc=yes
#else
configure___ system_malloc=no
#endif
#ifdef USE_MMAP_FOR_BUFFERS
configure___ use_mmap_for_buffers=yes
#else
configure___ use_mmap_for_buffers=no
#endif
#ifndef C_DEBUG_SWITCH
#define C_DEBUG_SWITCH -g
#endif
#ifndef C_OPTIMIZE_SWITCH
#ifdef __GNUC__
#define C_OPTIMIZE_SWITCH -O2
#else
#define C_OPTIMIZE_SWITCH -O
#endif
#endif
#ifndef LD_SWITCH_MACHINE
#define LD_SWITCH_MACHINE
#endif
#ifndef LD_SWITCH_SYSTEM
#define LD_SWITCH_SYSTEM
#endif
#ifndef LD_SWITCH_X_SITE_AUX
#define LD_SWITCH_X_SITE_AUX
#endif
configure___ ld_switch_system=LD_SWITCH_SYSTEM
configure___ ld_switch_machine=LD_SWITCH_MACHINE
#ifdef THIS_IS_CONFIGURE
/* Get the CFLAGS for tests in configure. */
#ifdef __GNUC__
configure___ CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${SPECIFIED_CFLAGS}'
#else
configure___ CFLAGS=C_DEBUG_SWITCH '${SPECIFIED_CFLAGS}'
#endif
#else /* not THIS_IS_CONFIGURE */
/* Get the CFLAGS for real compilation. */
#ifdef __GNUC__
configure___ REAL_CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${SPECIFIED_CFLAGS}'
#else
configure___ REAL_CFLAGS=C_DEBUG_SWITCH '${SPECIFIED_CFLAGS}'
#endif
#endif /* not THIS_IS_CONFIGURE */
' > ${tempcname}
# The value of CPP is a quoted variable reference, so we need to do this
# to get its actual value...
CPP=`eval "echo $CPP"`
changequote(, )dnl
eval `${CPP} -Isrc ${tempcname} \
| sed -n -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/p'`
if test "x$SPECIFIED_CFLAGS" = x; then
eval `${CPP} -Isrc -DTHIS_IS_CONFIGURE ${tempcname} \
| sed -n -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/p'`
else
REAL_CFLAGS="$CFLAGS"
fi
changequote([, ])dnl
rm ${tempcname}
ac_link="$ac_link $ld_switch_machine $ld_switch_system"
### Make sure subsequent tests use flags consistent with the build flags.
if test x"${OVERRIDE_CPPFLAGS}" != x; then
CPPFLAGS="${OVERRIDE_CPPFLAGS}"
else
CPPFLAGS="$c_switch_system $c_switch_machine $CPPFLAGS"
fi
dnl Do this early because it can frob feature test macros for Unix-98 &c.
AC_SYS_LARGEFILE
# Sound support for GNU/Linux and the free BSDs.
AC_CHECK_HEADERS(machine/soundcard.h sys/soundcard.h soundcard.h)
# Emulation library used on NetBSD.
AC_CHECK_LIB(ossaudio, _oss_ioctl, LIBSOUND=-lossaudio, LIBSOUND=)
AC_SUBST(LIBSOUND)
dnl checks for header files
AC_CHECK_HEADERS(sys/select.h sys/timeb.h sys/time.h unistd.h utime.h \
linux/version.h sys/systeminfo.h termios.h limits.h string.h stdlib.h \
termcap.h stdio_ext.h fcntl.h term.h strings.h)
AC_HEADER_STDC
AC_HEADER_TIME
AC_DECL_SYS_SIGLIST
AC_HEADER_SYS_WAIT
dnl Some systems have utime.h but don't declare the struct anyplace.
AC_CACHE_CHECK(for struct utimbuf, emacs_cv_struct_utimbuf,
AC_TRY_COMPILE([#ifdef TIME_WITH_SYS_TIME
#include <sys/time.h>
#include <time.h>
#else
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#else
#include <time.h>
#endif
#endif
#ifdef HAVE_UTIME_H
#include <utime.h>
#endif], [static struct utimbuf x; x.actime = x.modtime;],
emacs_cv_struct_utimbuf=yes, emacs_cv_struct_utimbuf=no))
if test $emacs_cv_struct_utimbuf = yes; then
AC_DEFINE(HAVE_STRUCT_UTIMBUF)
fi
dnl checks for typedefs
AC_TYPE_SIGNAL
dnl Check for speed_t typedef.
AC_CACHE_CHECK(for speed_t, emacs_cv_speed_t,
AC_TRY_COMPILE([#include <termios.h>], [speed_t x = 1;],
emacs_cv_speed_t=yes))
if test $emacs_cv_speed_t = yes; then
AC_DEFINE(HAVE_SPEED_T)
fi
AC_CACHE_CHECK(for struct timeval, emacs_cv_struct_timeval,
AC_TRY_COMPILE([#ifdef TIME_WITH_SYS_TIME
#include <sys/time.h>
#include <time.h>
#else
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#else
#include <time.h>
#endif
#endif], [static struct timeval x; x.tv_sec = x.tv_usec;],
emacs_cv_struct_timeval=yes, emacs_cv_struct_timeval=no))
HAVE_TIMEVAL=$emacs_cv_struct_timeval
if test $emacs_cv_struct_timeval = yes; then
AC_DEFINE(HAVE_TIMEVAL)
fi
AC_CACHE_CHECK(for struct exception, emacs_cv_struct_exception,
AC_TRY_COMPILE([#include <math.h>],
[static struct exception x; x.arg1 = x.arg2 = x.retval; x.name = ""; x.type = 1;],
emacs_cv_struct_exception=yes, emacs_cv_struct_exception=no))
HAVE_EXCEPTION=$emacs_cv_struct_exception
if test $emacs_cv_struct_exception != yes; then
AC_DEFINE(NO_MATHERR)
fi
dnl checks for structure members
AC_STRUCT_TM
AC_STRUCT_TIMEZONE
AC_CACHE_CHECK(for tm_gmtoff in struct tm, emacs_cv_tm_gmtoff,
AC_TRY_LINK([#include <time.h>], [struct tm t; t.tm_gmtoff = 0],
emacs_cv_tm_gmtoff=yes,
emacs_cv_tm_gmtoff=no))
if test $emacs_cv_tm_gmtoff = yes; then
AC_DEFINE(HAVE_TM_GMTOFF)
fi
dnl checks for compiler characteristics
dnl Testing __STDC__ to determine prototype support isn't good enough.
dnl DEC C, for instance, doesn't define it with default options, and
dnl is used on 64-bit systems (OSF Alphas). Similarly for volatile
dnl and void *.
AC_C_PROTOTYPES
AC_C_VOLATILE
AC_C_CONST
dnl This isn't useful because we can't turn on use of `inline' unless
dnl the compiler groks `extern inline'.
dnl AC_C_INLINE
AC_CACHE_CHECK([for void * support], emacs_cv_void_star,
[AC_TRY_COMPILE(, [void * foo;],
emacs_cv_void_star=yes, emacs_cv_void_star=no)])
if test $emacs_cv_void_star = yes; then
AC_DEFINE(POINTER_TYPE, void)
else
AC_DEFINE(POINTER_TYPE, char)
fi
dnl check for Make feature
AC_PROG_MAKE_SET
dnl checks for operating system services
AC_SYS_LONG_FILE_NAMES
#### Choose a window system.
AC_PATH_X
if test "$no_x" = yes; then
window_system=none
else
window_system=x11
fi
if test "${x_libraries}" != NONE && test -n "${x_libraries}"; then
LD_SWITCH_X_SITE=-L`echo ${x_libraries} | sed -e "s/:/ -L/g"`
LD_SWITCH_X_SITE_AUX=-R`echo ${x_libraries} | sed -e "s/:/ -R/g"`
x_default_search_path=""
for x_library in `echo ${x_libraries} | sed -e "s/:/ /g"`; do
x_search_path="\
${x_library}/X11/%L/%T/%N%C%S:\
${x_library}/X11/%l/%T/%N%C%S:\
${x_library}/X11/%T/%N%C%S:\
${x_library}/X11/%L/%T/%N%S:\
${x_library}/X11/%l/%T/%N%S:\
${x_library}/X11/%T/%N%S"
if test x"${x_default_search_path}" = x; then
x_default_search_path=${x_search_path}
else
x_default_search_path="${x_search_path}:${x_default_search_path}"
fi
done
fi
if test "${x_includes}" != NONE && test -n "${x_includes}"; then
C_SWITCH_X_SITE=-I`echo ${x_includes} | sed -e "s/:/ -I/g"`
fi
if test x"${x_includes}" = x; then
bitmapdir=/usr/include/X11/bitmaps
else
# accumulate include directories that have X11 bitmap subdirectories
bmd_acc="dummyval"
for bmd in `echo ${x_includes} | sed -e "s/:/ /g"`; do
if test -d "${bmd}/X11/bitmaps"; then
bmd_acc="${bmd_acc}:${bmd}/X11/bitmaps"
fi
if test -d "${bmd}/bitmaps"; then
bmd_acc="${bmd_acc}:${bmd}/bitmaps"
fi
done
if test ${bmd_acc} != "dummyval"; then
bitmapdir=`echo ${bmd_acc} | sed -e "s/^dummyval://"`
fi
fi
case "${window_system}" in
x11 )
HAVE_X_WINDOWS=yes
HAVE_X11=yes
case "${with_x_toolkit}" in
athena | lucid ) USE_X_TOOLKIT=LUCID ;;
motif ) USE_X_TOOLKIT=MOTIF ;;
dnl open-look ) USE_X_TOOLKIT=OPEN_LOOK ;;
no ) USE_X_TOOLKIT=none ;;
dnl If user did not say whether to use a toolkit,
dnl make this decision later: use the toolkit if we have X11R5 or newer.
* ) USE_X_TOOLKIT=maybe ;;
esac
;;
none )
HAVE_X_WINDOWS=no
HAVE_X11=no
USE_X_TOOLKIT=none
;;
esac
### If we're using X11, we should use the X menu package.
HAVE_MENUS=no
case ${HAVE_X11} in
yes ) HAVE_MENUS=yes ;;
esac
if test "${opsys}" = "hpux9"; then
case "${x_libraries}" in
*X11R4* )
opsysfile="s/hpux9-x11r4.h"
;;
esac
fi
if test "${opsys}" = "hpux9shr"; then
case "${x_libraries}" in
*X11R4* )
opsysfile="s/hpux9shxr4.h"
;;
esac
fi
### Compute the unexec source name from the object name.
UNEXEC_SRC="`echo ${unexec} | sed 's/\.o/.c/'`"
# Do the opsystem or machine files prohibit the use of the GNU malloc?
# Assume not, until told otherwise.
GNU_MALLOC=yes
doug_lea_malloc=yes
AC_CHECK_FUNC(malloc_get_state, ,doug_lea_malloc=no)
AC_CHECK_FUNC(malloc_set_state, ,doug_lea_malloc=no)
AC_CACHE_CHECK(whether __after_morecore_hook exists,
emacs_cv_var___after_morecore_hook,
AC_TRY_LINK([extern void (* __after_morecore_hook)();],[__after_morecore_hook = 0],
emacs_cv_var___after_morecore_hook=yes,
emacs_cv_var___after_morecore_hook=no))
if test $emacs_cv_var___after_morecore_hook = no; then
doug_lea_malloc=no
fi
if test "${system_malloc}" = "yes"; then
GNU_MALLOC=no
GNU_MALLOC_reason="
(The GNU allocators don't work with this system configuration.)"
fi
if test "$doug_lea_malloc" = "yes" ; then
if test "$GNU_MALLOC" = yes ; then
GNU_MALLOC_reason="
(Using Doug Lea's new malloc from the GNU C Library.)"
fi
AC_DEFINE(DOUG_LEA_MALLOC)
fi
if test x"${REL_ALLOC}" = x; then
REL_ALLOC=${GNU_MALLOC}
fi
dnl For now, need to use an explicit `#define USE_MMAP_FOR_BUFFERS 1'
dnl the system configuration file (s/*.h) to turn the use of mmap
dnl in the relocating allocator on.
AC_FUNC_MMAP
if test $use_mmap_for_buffers = yes; then
REL_ALLOC=no
fi
LIBS="$libsrc_libs $LIBS"
dnl If found, this defines HAVE_LIBDNET, which m/pmax.h checks,
dnl and also adds -ldnet to LIBS, which Autoconf uses for checks.
AC_CHECK_LIB(dnet, dnet_ntoa)
dnl This causes -lresolv to get used in subsequent tests,
dnl which causes failures on some systems such as HPUX 9.
dnl AC_CHECK_LIB(resolv, gethostbyname)
dnl FIXME replace main with a function we actually want from this library.
AC_CHECK_LIB(Xbsd, main, LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE -lXbsd")
AC_CHECK_LIB(pthreads, cma_open)
AC_MSG_CHECKING(for XFree86 in /usr/X386)
if test -d /usr/X386/include; then
HAVE_XFREE386=yes
: ${C_SWITCH_X_SITE="-I/usr/X386/include"}
else
HAVE_XFREE386=no
fi
AC_MSG_RESULT($HAVE_XFREE386)
# Change CFLAGS temporarily so that C_SWITCH_X_SITE gets used
# for the tests that follow. We set it back to REAL_CFLAGS later on.
REAL_CPPFLAGS="$CPPFLAGS"
if test "${HAVE_X11}" = "yes"; then
DEFS="$C_SWITCH_X_SITE $DEFS"
LDFLAGS="$LDFLAGS $LD_SWITCH_X_SITE"
LIBS="$LIBX $LIBS"
CFLAGS="$C_SWITCH_X_SITE $CFLAGS"
CPPFLAGS="$C_SWITCH_X_SITE $CPPFLAGS"
# On Solaris, arrange for LD_RUN_PATH to point to the X libraries for tests.
# This is handled by LD_SWITCH_X_SITE_AUX during the real build,
# but it's more convenient here to set LD_RUN_PATH
# since this also works on hosts that don't understand LD_SWITCH_X_SITE_AUX.
if test "${x_libraries}" != NONE && test -n "${x_libraries}"; then
LD_RUN_PATH=$x_libraries${LD_RUN_PATH+:}$LD_RUN_PATH
export LD_RUN_PATH
fi
if test "${opsys}" = "gnu-linux"; then
AC_MSG_CHECKING(whether X on GNU/Linux needs -b to link)
AC_TRY_LINK([],
[XOpenDisplay ("foo");],
[xlinux_first_failure=no],
[xlinux_first_failure=yes])
if test "${xlinux_first_failure}" = "yes"; then
OLD_LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE"
OLD_C_SWITCH_X_SITE="$C_SWITCH_X_SITE"
OLD_CPPFLAGS="$CPPFLAGS"
OLD_LIBS="$LIBS"
LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE -b i486-linuxaout"
C_SWITCH_X_SITE="$C_SWITCH_X_SITE -b i486-linuxaout"
CPPFLAGS="$CPPFLAGS -b i486-linuxaout"
LIBS="$LIBS -b i486-linuxaout"
AC_TRY_LINK([],
[XOpenDisplay ("foo");],
[xlinux_second_failure=no],
[xlinux_second_failure=yes])
if test "${xlinux_second_failure}" = "yes"; then
# If we get the same failure with -b, there is no use adding -b.
# So take it out. This plays safe.
LD_SWITCH_X_SITE="$OLD_LD_SWITCH_X_SITE"
C_SWITCH_X_SITE="$OLD_C_SWITCH_X_SITE"
CPPFLAGS="$OLD_CPPFLAGS"
LIBS="$OLD_LIBS"
AC_MSG_RESULT(no)
else
AC_MSG_RESULT(yes)
fi
else
AC_MSG_RESULT(no)
fi
fi
# Reportedly, some broken Solaris systems have XKBlib.h but are missing
# header files included from there.
AC_MSG_CHECKING(for Xkb)
AC_TRY_LINK([#include <X11/Xlib.h>
#include <X11/XKBlib.h>],
[XkbDescPtr kb = XkbGetKeyboard (0, XkbAllComponentsMask, XkbUseCoreKbd);],
emacs_xkb=yes, emacs_xkb=no)
AC_MSG_RESULT($emacs_xkb)
if test $emacs_xkb = yes; then
AC_DEFINE(HAVE_XKBGETKEYBOARD)
fi
AC_CHECK_FUNCS(XrmSetDatabase XScreenResourceString \
XScreenNumberOfScreen XSetWMProtocols)
fi
if test "${window_system}" = "x11"; then
AC_MSG_CHECKING(X11 version 6)
AC_CACHE_VAL(emacs_cv_x11_version_6,
AC_TRY_LINK([#include <X11/Xlib.h>],
[#if XlibSpecificationRelease < 6
fail;
#endif
], emacs_cv_x11_version_6=yes, emacs_cv_x11_version_6=no))
if test $emacs_cv_x11_version_6 = yes; then
AC_MSG_RESULT(6 or newer)
AC_DEFINE(HAVE_X11R6)
else
AC_MSG_RESULT(before 6)
fi
fi
if test "${window_system}" = "x11"; then
AC_MSG_CHECKING(X11 version 5)
AC_CACHE_VAL(emacs_cv_x11_version_5,
AC_TRY_LINK([#include <X11/Xlib.h>],
[#if XlibSpecificationRelease < 5
fail;
#endif
], emacs_cv_x11_version_5=yes, emacs_cv_x11_version_5=no))
if test $emacs_cv_x11_version_5 = yes; then
AC_MSG_RESULT(5 or newer)
HAVE_X11R5=yes
AC_DEFINE(HAVE_X11R5)
else
HAVE_X11R5=no
AC_MSG_RESULT(before 5)
fi
fi
dnl Do not put whitespace before the #include statements below.
dnl Older compilers (eg sunos4 cc) choke on it.
if test x"${USE_X_TOOLKIT}" = xmaybe; then
if test x"${HAVE_X11R5}" = xyes; then
AC_MSG_CHECKING(X11 version 5 with Xaw)
AC_CACHE_VAL(emacs_cv_x11_version_5_with_xaw,
AC_TRY_LINK([
#include <X11/Intrinsic.h>
#include <X11/Xaw/Simple.h>],
[],
emacs_cv_x11_version_5_with_xaw=yes,
emacs_cv_x11_version_5_with_xaw=no))
if test $emacs_cv_x11_version_5_with_xaw = yes; then
AC_MSG_RESULT([5 or newer, with Xaw; use toolkit by default])
USE_X_TOOLKIT=LUCID
else
AC_MSG_RESULT(before 5 or no Xaw; do not use toolkit by default)
USE_X_TOOLKIT=none
fi
else
USE_X_TOOLKIT=none
fi
fi
X_TOOLKIT_TYPE=$USE_X_TOOLKIT
if test "${USE_X_TOOLKIT}" != "none"; then
AC_MSG_CHECKING(X11 toolkit version)
AC_CACHE_VAL(emacs_cv_x11_toolkit_version_6,
AC_TRY_LINK([#include <X11/Intrinsic.h>],
[#if XtSpecificationRelease < 6
fail;
#endif
], emacs_cv_x11_toolkit_version_6=yes, emacs_cv_x11_toolkit_version_6=no))
HAVE_X11XTR6=$emacs_cv_x11_toolkit_version_6
if test $emacs_cv_x11_toolkit_version_6 = yes; then
AC_MSG_RESULT(6 or newer)
AC_DEFINE(HAVE_X11XTR6)
else
AC_MSG_RESULT(before 6)
fi
dnl If using toolkit, check whether libXmu.a exists.
dnl tranle@intellicorp.com says libXmu.a can need XtMalloc in libXt.a to link.
OLDLIBS="$LIBS"
if test x$HAVE_X11XTR6 = xyes; then
LIBS="-lXt -lSM -lICE $LIBS"
else
LIBS="-lXt $LIBS"
fi
AC_CHECK_LIB(Xmu, XmuConvertStandardSelection)
test $ac_cv_lib_Xmu_XmuConvertStandardSelection = no && LIBS="$OLDLIBS"
fi
# On Irix 6.5, at least, we need XShapeQueryExtension from -lXext for Xaw3D.
if test "${HAVE_X11}" = "yes"; then
if test "${USE_X_TOOLKIT}" != "none"; then
AC_CHECK_LIB(Xext, XShapeQueryExtension)
fi
fi
if test "${USE_X_TOOLKIT}" = "MOTIF"; then
AC_CACHE_CHECK(for Motif version 2.1, emacs_cv_motif_version_2_1,
AC_TRY_COMPILE([#include <Xm/Xm.h>],
[#if XmVERSION > 2 || (XmVERSION == 2 && XmREVISION >= 1)
int x = 5;
#else
Motif version prior to 2.1.
#endif],
emacs_cv_motif_version_2_1=yes, emacs_cv_motif_version_2_1=no))
HAVE_MOTIF_2_1=$emacs_cv_motif_version_2_1
if test $emacs_cv_motif_version_2_1 = yes; then
HAVE_LIBXP=no
AC_DEFINE(HAVE_MOTIF_2_1)
AC_CHECK_LIB(Xp, XpCreateContext, HAVE_LIBXP=yes)
if test ${HAVE_LIBXP} = yes; then
AC_DEFINE(HAVE_LIBXP)
fi
fi
fi
### Is -lXaw3d available?
HAVE_XAW3D=no
if test "${HAVE_X11}" = "yes"; then
if test "${USE_X_TOOLKIT}" != "none"; then
AC_CHECK_HEADER(X11/Xaw3d/Scrollbar.h,
AC_CHECK_LIB(Xaw3d, XawScrollbarSetThumb, HAVE_XAW3D=yes))
if test "${HAVE_XAW3D}" = "yes"; then
AC_DEFINE(HAVE_XAW3D)
fi
fi
fi
dnl Use toolkit scroll bars if configured for X toolkit and either
dnl using Motif or Xaw3d is available, and unless
dnl --with-toolkit-scroll-bars=no was specified.
USE_TOOLKIT_SCROLL_BARS=no
if test "${with_toolkit_scroll_bars}" != "no"; then
if test "${USE_X_TOOLKIT}" != "none"; then
if test "${USE_X_TOOLKIT}" = "MOTIF"; then
AC_DEFINE(USE_TOOLKIT_SCROLL_BARS)
HAVE_XAW3D=no
USE_TOOLKIT_SCROLL_BARS=yes
elif test "${HAVE_XAW3D}" = "yes"; then
AC_DEFINE(USE_TOOLKIT_SCROLL_BARS)
USE_TOOLKIT_SCROLL_BARS=yes
fi
fi
fi
dnl Don't use X11 input methods if user specifies he doesn't want it
dnl with `--with-xim=no'.
if test "${with_xim}" != "no"; then
AC_DEFINE(USE_XIM)
fi
### Use -lXpm if available, unless `--with-xpm=no'.
HAVE_XPM=no
if test "${HAVE_X11}" = "yes"; then
if test "${with_xpm}" != "no"; then
AC_CHECK_HEADER(X11/xpm.h,
AC_CHECK_LIB(Xpm, XpmReadFileToPixmap, HAVE_XPM=yes, , -lX11))
if test "${HAVE_XPM}" = "yes"; then
AC_MSG_CHECKING(for XpmReturnAllocPixels preprocessor define)
AC_EGREP_CPP(no_return_alloc_pixels,
[#include "X11/xpm.h"
#ifndef XpmReturnAllocPixels
no_return_alloc_pixels
#endif
], HAVE_XPM=no, HAVE_XPM=yes)
if test "${HAVE_XPM}" = "yes"; then
AC_MSG_RESULT(yes)
else
AC_MSG_RESULT(no)
fi
fi
fi
if test "${HAVE_XPM}" = "yes"; then
AC_DEFINE(HAVE_XPM)
fi
fi
### Use -ljpeg if available, unless `--with-jpeg=no'.
HAVE_JPEG=no
if test "${HAVE_X11}" = "yes"; then
if test "${with_jpeg}" != "no"; then
dnl Checking for jpeglib.h can lose becsue of a redefinition of
dnl HAVE_STDLIB_H.
AC_CHECK_HEADER(jerror.h,
AC_CHECK_LIB(jpeg, jpeg_destroy_compress, HAVE_JPEG=yes))
fi
if test "${HAVE_JPEG}" = "yes"; then
AC_DEFINE(HAVE_JPEG)
fi
fi
### Use -lpng if available, unless `--with-png=no'.
HAVE_PNG=no
if test "${HAVE_X11}" = "yes"; then
if test "${with_png}" != "no"; then
AC_CHECK_HEADER(png.h,
AC_CHECK_LIB(png, png_get_channels, HAVE_PNG=yes, , -lz -lm))
fi
if test "${HAVE_PNG}" = "yes"; then
AC_DEFINE(HAVE_PNG)
fi
fi
### Use -ltiff if available, unless `--with-tiff=no'.
HAVE_TIFF=no
if test "${HAVE_X11}" = "yes"; then
if test "${with_tiff}" != "no"; then
AC_CHECK_HEADER(tiffio.h,
tifflibs="-lz -lm"
# At least one tiff package requires the jpeg library.
if test "${HAVE_JPEG}" = yes; then tifflibs="-ljpeg $tifflibs"; fi
AC_CHECK_LIB(tiff, TIFFGetVersion, HAVE_TIFF=yes, , $tifflibs))
fi
if test "${HAVE_TIFF}" = "yes"; then
AC_DEFINE(HAVE_TIFF)
fi
fi
### Use -lgif if available, unless `--with-gif=no'.
HAVE_GIF=no
if test "${HAVE_X11}" = "yes"; then
if test "${with_gif}" != "no"; then
AC_CHECK_HEADER(gif_lib.h,
AC_CHECK_LIB(ungif, DGifOpen, HAVE_GIF=yes))
fi
if test "${HAVE_GIF}" = "yes"; then
AC_DEFINE(HAVE_GIF)
fi
fi
# If netdb.h doesn't declare h_errno, we must declare it by hand.
AC_CACHE_CHECK(whether netdb declares h_errno,
emacs_cv_netdb_declares_h_errno,
AC_TRY_LINK([#include <netdb.h>],
[return h_errno;],
emacs_cv_netdb_declares_h_errno=yes, emacs_cv_netdb_declares_h_errno=no))
if test $emacs_cv_netdb_declares_h_errno = yes; then
AC_DEFINE(HAVE_H_ERRNO)
fi
AC_FUNC_ALLOCA
# fmod, logb, and frexp are found in -lm on most systems.
# On HPUX 9.01, -lm does not contain logb, so check for sqrt.
AC_CHECK_LIB(m, sqrt)
# Check for mail-locking functions in a "mail" library
AC_CHECK_LIB(mail, maillock)
dnl Debian, at least:
dnl AC_CHECK_LIB(lockfile, maillock, [AC_DEFINE(HAVE_LIBMAIL)])
AC_CHECK_LIB(lockfile, maillock)
# If we have the shared liblockfile, assume we must use it for mail
# locking (e.g. Debian). If we couldn't link against liblockfile
# (no liblockfile.a installed), ensure that we don't need to.
if test "$ac_cv_lib_lockfile_maillock" = no; then
dnl This works for files generally, not just executables.
dnl Should we look elsewhere for it? Maybe examine /etc/ld.so.conf?
AC_CHECK_PROG(liblockfile, liblockfile.so, yes, no,
/usr/lib:/lib:/usr/local/lib:$LD_LIBRARY_PATH)
if test $ac_cv_prog_liblockfile = yes; then
AC_MSG_ERROR([Shared liblockfile found but can't link against it.
This probably means that movemail could lose mail.
There may be a \`development' package to install containing liblockfile.])
else AC_DEFINE(LIBMAIL, -llockfile)
fi
else :
fi
AC_CHECK_FUNCS(touchlock)
AC_CHECK_HEADERS(maillock.h)
AC_CHECK_FUNCS(gethostname getdomainname dup2 \
rename closedir mkdir rmdir sysinfo \
random lrand48 bcopy bcmp logb frexp fmod rint cbrt ftime res_init setsid \
strerror fpathconf select mktime euidaccess getpagesize tzset setlocale \
utimes setrlimit setpgid getcwd getwd shutdown strftime getaddrinfo \
__fpending mblen mbrlen strsignal setitimer ualarm index rindex \
gai_strerror mkstemp)
AC_FUNC_MKTIME
if test "$ac_cv_func_working_mktime" = no; then
AC_DEFINE(BROKEN_MKTIME)
fi
AC_FUNC_GETLOADAVG
AC_FUNC_FSEEKO
# UNIX98 PTYs.
AC_CHECK_FUNCS(grantpt)
# PTY-related GNU extensions.
AC_CHECK_FUNCS(getpt)
# Check this now, so that we will NOT find the above functions in ncurses.
# That is because we have not set up to link ncurses in lib-src.
# It's better to believe a function is not available
# than to expect to find it in ncurses.
AC_CHECK_LIB(ncurses, tparm)
# Do we need the Hesiod library to provide the support routines?
if test "$with_hesiod" = yes ; then
# Don't set $LIBS here -- see comments above.
resolv=no
AC_CHECK_FUNC(res_send, , [AC_CHECK_FUNC(__res_send, ,
[AC_CHECK_LIB(resolv, res_send, resolv=yes,
[AC_CHECK_LIB(resolv, __res_send, resolv=yes)])])])
if test "$resolv" = yes ; then
RESOLVLIB=-lresolv
AC_DEFINE(HAVE_LIBRESOLV)
else
RESOLVLIB=
fi
AC_CHECK_FUNC(hes_getmailhost, , [AC_CHECK_LIB(hesiod, hes_getmailhost,
AC_DEFINE(HAVE_LIBHESIOD), :, $RESOLVLIB)])
fi
# These tell us which Kerberos-related libraries to use.
if test "${with_kerberos+set}" = set; then
AC_CHECK_LIB(com_err, com_err)
AC_CHECK_LIB(k5crypto, mit_des_cbc_encrypt)
AC_CHECK_LIB(crypto, mit_des_cbc_encrypt)
AC_CHECK_LIB(krb5, krb5_init_context)
if test "${with_kerberos5+set}" != set; then
AC_CHECK_LIB(des425, des_cbc_encrypt,,
AC_CHECK_LIB(des, des_cbc_encrypt))
AC_CHECK_LIB(krb4, krb_get_cred,,
AC_CHECK_LIB(krb, krb_get_cred))
fi
if test "${with_kerberos5+set}" = set; then
AC_CHECK_HEADERS(krb5.h)
else
AC_CHECK_HEADERS(des.h,,
AC_CHECK_HEADERS(kerberosIV/des.h,,
AC_CHECK_HEADERS(kerberos/des.h)))
AC_CHECK_HEADERS(krb.h,,
AC_CHECK_HEADERS(kerberosIV/krb.h,,
AC_CHECK_HEADERS(kerberos/krb.h)))
fi
AC_CHECK_HEADERS(com_err.h)
fi
# Solaris requires -lintl if you want strerror (which calls dgettext)
# to return localized messages.
AC_CHECK_LIB(intl, dgettext)
AC_MSG_CHECKING(whether localtime caches TZ)
AC_CACHE_VAL(emacs_cv_localtime_cache,
[if test x$ac_cv_func_tzset = xyes; then
AC_TRY_RUN([#include <time.h>
extern char **environ;
unset_TZ ()
{
char **from, **to;
for (to = from = environ; (*to = *from); from++)
if (! (to[0][0] == 'T' && to[0][1] == 'Z' && to[0][2] == '='))
to++;
}
char TZ_GMT0[] = "TZ=GMT0";
char TZ_PST8[] = "TZ=PST8";
main()
{
time_t now = time ((time_t *) 0);
int hour_GMT0, hour_unset;
if (putenv (TZ_GMT0) != 0)
exit (1);
hour_GMT0 = localtime (&now)->tm_hour;
unset_TZ ();
hour_unset = localtime (&now)->tm_hour;
if (putenv (TZ_PST8) != 0)
exit (1);
if (localtime (&now)->tm_hour == hour_GMT0)
exit (1);
unset_TZ ();
if (localtime (&now)->tm_hour != hour_unset)
exit (1);
exit (0);
}], emacs_cv_localtime_cache=no, emacs_cv_localtime_cache=yes,
[# If we have tzset, assume the worst when cross-compiling.
emacs_cv_localtime_cache=yes])
else
# If we lack tzset, report that localtime does not cache TZ,
# since we can't invalidate the cache if we don't have tzset.
emacs_cv_localtime_cache=no
fi])dnl
AC_MSG_RESULT($emacs_cv_localtime_cache)
if test $emacs_cv_localtime_cache = yes; then
AC_DEFINE(LOCALTIME_CACHE)
fi
if test "x$HAVE_TIMEVAL" = xyes; then
AC_CHECK_FUNCS(gettimeofday)
AC_CACHE_CHECK(whether gettimeofday can accept two arguments,
emacs_cv_gettimeofday_two_arguments,
AC_TRY_COMPILE([
#ifdef TIME_WITH_SYS_TIME
#include <sys/time.h>
#include <time.h>
#else
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#else
#include <time.h>
#endif
#endif],
[struct timeval time;
gettimeofday (&time, 0);],
emacs_cv_gettimeofday_two_arguments=yes,
emacs_cv_gettimeofday_two_arguments=no))
if test $emacs_cv_gettimeofday_two_arguments = no; then
AC_DEFINE(GETTIMEOFDAY_ONE_ARGUMENT)
fi
fi
dnl Note that AC_STRUCT_TIMEZONE doesn't do what you might expect.
if test "$ac_cv_func_gettimeofday" = yes; then
AC_CACHE_CHECK([for struct timezone], emacs_cv_struct_timezone,
[AC_TRY_COMPILE([#include <sys/time.h>],
[struct timezone tz;],
dnl It may be that we can't call gettimeofday with a non-null pointer,
dnl even though we have struct timezone (e.g. HPUX). In that case
dnl we'll lie about struct timezone.
[AC_TRY_RUN([
#ifdef TIME_WITH_SYS_TIME
#include <sys/time.h>
#include <time.h>
#else
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#else
#include <time.h>
#endif
#endif
main () {
struct timeval time;
struct timezone dummy;
exit (gettimeofday (&time, &dummy));
}],
emacs_cv_struct_timezone=yes,
emacs_cv_struct_timezone=no, emacs_cv_struct_timezone=yes)],
emacs_cv_struct_timezone=no)])
fi
ok_so_far=yes
AC_CHECK_FUNC(socket, , ok_so_far=no)
if test $ok_so_far = yes; then
AC_CHECK_HEADER(netinet/in.h, , ok_so_far=no)
fi
if test $ok_so_far = yes; then
AC_CHECK_HEADER(arpa/inet.h, , ok_so_far=no)
fi
if test $ok_so_far = yes; then
AC_DEFINE(HAVE_INET_SOCKETS)
fi
if test -f /usr/lpp/X11/bin/smt.exp; then
AC_DEFINE(HAVE_AIX_SMT_EXP)
fi
AC_MSG_CHECKING(whether system supports dynamic ptys)
if test -d /dev/pts && ls -d /dev/ptmx > /dev/null 2>&1 ; then
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_DEV_PTMX)
else
AC_MSG_RESULT(no)
fi
AC_FUNC_VFORK
# Fixme: This should be replaced when we have autoconf 2.14.
AC_SIZE_T
# Set up the CFLAGS for real compilation, so we can substitute it.
CFLAGS="$REAL_CFLAGS"
CPPFLAGS="$REAL_CPPFLAGS"
changequote(, )dnl
#### Find out which version of Emacs this is.
version=`grep 'defconst[ ]*emacs-version' ${srcdir}/lisp/version.el \
| sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'`
changequote([, ])dnl
if test x"${version}" = x; then
AC_MSG_ERROR(can't find current emacs version in \`${srcdir}/lisp/version.el'.)
fi
### Specify what sort of things we'll be editing into Makefile and config.h.
### Use configuration here uncanonicalized to avoid exceeding size limits.
AC_SUBST(version)
AC_SUBST(configuration)
AC_SUBST(canonical)
AC_SUBST(srcdir)
AC_SUBST(prefix)
AC_SUBST(exec_prefix)
AC_SUBST(bindir)
AC_SUBST(datadir)
AC_SUBST(sharedstatedir)
AC_SUBST(libexecdir)
AC_SUBST(mandir)
AC_SUBST(infodir)
AC_SUBST(lispdir)
AC_SUBST(locallisppath)
AC_SUBST(lisppath)
AC_SUBST(x_default_search_path)
AC_SUBST(etcdir)
AC_SUBST(archlibdir)
AC_SUBST(docdir)
AC_SUBST(bitmapdir)
AC_SUBST(c_switch_system)
AC_SUBST(c_switch_machine)
AC_SUBST(LD_SWITCH_X_SITE)
AC_SUBST(LD_SWITCH_X_SITE_AUX)
AC_SUBST(C_SWITCH_X_SITE)
AC_SUBST(CFLAGS)
AC_SUBST(X_TOOLKIT_TYPE)
AC_SUBST(machfile)
AC_SUBST(opsysfile)
AC_SUBST(GETLOADAVG_LIBS)
AC_DEFINE_UNQUOTED(EMACS_CONFIGURATION, "${canonical}")
AC_DEFINE_UNQUOTED(EMACS_CONFIG_OPTIONS, "${ac_configure_args}")
AC_DEFINE_UNQUOTED(config_machfile, "${machfile}")
AC_DEFINE_UNQUOTED(config_opsysfile, "${opsysfile}")
AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE, ${LD_SWITCH_X_SITE})
AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE_AUX, ${LD_SWITCH_X_SITE_AUX})
AC_DEFINE_UNQUOTED(C_SWITCH_X_SITE, ${C_SWITCH_X_SITE})
AC_DEFINE_UNQUOTED(UNEXEC_SRC, ${UNEXEC_SRC})
if test "${HAVE_X_WINDOWS}" = "yes" ; then
AC_DEFINE(HAVE_X_WINDOWS)
fi
if test "${USE_X_TOOLKIT}" != "none" ; then
AC_DEFINE(USE_X_TOOLKIT)
fi
if test "${HAVE_X11}" = "yes" ; then
AC_DEFINE(HAVE_X11)
fi
if test "${HAVE_XFREE386}" = "yes" ; then
AC_DEFINE(HAVE_XFREE386)
fi
if test "${HAVE_MENUS}" = "yes" ; then
AC_DEFINE(HAVE_MENUS)
fi
if test "${GNU_MALLOC}" = "yes" ; then
AC_DEFINE(GNU_MALLOC)
fi
if test "${REL_ALLOC}" = "yes" ; then
AC_DEFINE(REL_ALLOC)
fi
#### Report on what we decided to do.
echo "
Configured for \`${canonical}'.
Where should the build process find the source code? ${srcdir}
What operating system and machine description files should Emacs use?
\`${opsysfile}' and \`${machfile}'
What compiler should emacs be built with? ${CC} ${CFLAGS}
Should Emacs use the GNU version of malloc? ${GNU_MALLOC}${GNU_MALLOC_reason}
Should Emacs use a relocating allocator for buffers? ${REL_ALLOC}
Should Emacs use mmap(2) for buffer allocation? $use_mmap_for_buffers
What window system should Emacs use? ${window_system}
What toolkit should Emacs use? ${USE_X_TOOLKIT}"
if test -n "${x_includes}"; then
echo " Where do we find X Windows header files? ${x_includes}"
else
echo " Where do we find X Windows header files? Standard dirs"
fi
if test -n "${x_libraries}"; then
echo " Where do we find X Windows libraries? ${x_libraries}"
else
echo " Where do we find X Windows libraries? Standard dirs"
fi
echo " Does Emacs use -lXaw3d? ${HAVE_XAW3D}"
echo " Does Emacs use -lXpm? ${HAVE_XPM}"
echo " Does Emacs use -ljpeg? ${HAVE_JPEG}"
echo " Does Emacs use -ltiff? ${HAVE_TIFF}"
echo " Does Emacs use -lungif? ${HAVE_GIF}"
echo " Does Emacs use -lpng? ${HAVE_PNG}"
echo " Does Emacs use X toolkit scroll bars? ${USE_TOOLKIT_SCROLL_BARS}"
echo
# Remove any trailing slashes in these variables.
changequote(, )dnl
test "${prefix}" != NONE &&
prefix=`echo "${prefix}" | sed 's,\([^/]\)/*$,\1,'`
test "${exec_prefix}" != NONE &&
exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'`
changequote([, ])dnl
## Check if the C preprocessor will convert `..' to `. .'. If so, set
## CPP_NEED_TRADITIONAL to `yes' so that the code to generate Makefile
## from Makefile.c can correctly provide the arg `-traditional' to the
## C preprocessor.
AC_EGREP_CPP(yes..yes,
[yes..yes],
CPP_NEED_TRADITIONAL=no,
CPP_NEED_TRADITIONAL=yes)
AC_OUTPUT(Makefile lib-src/Makefile.c:lib-src/Makefile.in oldXMenu/Makefile \
man/Makefile lwlib/Makefile src/Makefile.c:src/Makefile.in \
lisp/Makefile leim/Makefile, [
### Make the necessary directories, if they don't exist.
for dir in etc lisp ; do
test -d ${dir} || mkdir ${dir}
done
# Build src/Makefile from ${srcdir}/src/Makefile.c
# and lib-src/Makefile from ${srcdir}/lib-src/Makefile.c
# This must be done after src/config.h is built, since we rely on that file.
changequote(, )dnl The horror, the horror.
# Now get this: Some word that is part of the ${srcdir} directory name
# or the ${configuration} value might, just might, happen to be an
# identifier like `sun4' or `i386' or something, and be predefined by
# the C preprocessor to some helpful value like 1, or maybe the empty
# string. Needless to say consequent macro substitutions are less
# than conducive to the makefile finding the correct directory.
undefs="`echo $top_srcdir $configuration $canonical |
sed -e 's/[^a-zA-Z0-9_]/ /g' -e 's/^/ /' -e 's/ *$//' \
-e 's/ */ -U/g' -e 's/-U[0-9][^ ]*//g' \
`"
changequote([, ])dnl
echo creating src/epaths.h
${MAKE-make} epaths-force
# As of 2000-11-19, newest development versions of GNU cpp preprocess
# `..' to `. .' unless invoked with -traditional
if test "x$GCC" = xyes && test "x$CPP_NEED_TRADITIONAL" = xyes; then
CPPFLAGS="$CPPFLAGS -traditional"
fi
echo creating lib-src/Makefile
( cd lib-src
rm -f junk.c junk1.c junk2.c
sed -e '/start of cpp stuff/q' \
< Makefile.c > junk1.c
sed -e '1,/start of cpp stuff/d'\
-e 's,/\*\*/#\(.*\)$,/* \1 */,' \
< Makefile.c > junk.c
$CPP $undefs -I. -I$top_srcdir/src $CPPFLAGS junk.c | \
sed -e 's/^ / /' -e '/^#/d' -e '/^[ ]*$/d' > junk2.c
cat junk1.c junk2.c > Makefile.new
rm -f junk.c junk1.c junk2.c
chmod 444 Makefile.new
mv -f Makefile.new Makefile
)
echo creating src/Makefile
( cd src
rm -f junk.c junk1.c junk2.c
sed -e '/start of cpp stuff/q' \
< Makefile.c > junk1.c
sed -e '1,/start of cpp stuff/d'\
-e 's,/\*\*/#\(.*\)$,/* \1 */,' \
< Makefile.c > junk.c
$CPP $undefs -I. -I$top_srcdir/src $CPPFLAGS junk.c | \
sed -e 's/^ / /' -e '/^#/d' -e '/^[ ]*$/d' > junk2.c
cat junk1.c junk2.c > Makefile.new
rm -f junk.c junk1.c junk2.c
chmod 444 Makefile.new
mv -f Makefile.new Makefile
)
if test ! -f src/.gdbinit && test -f $top_srcdir/src/.gdbinit; then
echo creating src/.gdbinit
echo source $top_srcdir/src/.gdbinit > src/.gdbinit
fi
# This is how we know whether to re-run configure in certain cases.
touch src/config.stamp
], [GCC="$GCC" NON_GNU_CPP="$NON_GNU_CPP" CPP="$CPP" CPP_NEED_TRADITIONAL="$CPP_NEED_TRADITIONAL" CPPFLAGS="$CPPFLAGS"])