@section Relocations BFD maintains relocations in much the same way it maintains symbols: they are left alone until required, then read in en-masse and translated into an internal form. A common routine @code{bfd_perform_relocation} acts upon the canonical form to do the fixup. Relocations are maintained on a per section basis, while symbols are maintained on a per BFD basis. All that a back end has to do to fit the BFD interface is to create a @code{struct reloc_cache_entry} for each relocation in a particular section, and fill in the right bits of the structures. @menu * typedef arelent:: * howto manager:: @end menu @node typedef arelent, howto manager, Relocations, Relocations @subsection typedef arelent This is the structure of a relocation entry: @example typedef enum bfd_reloc_status @{ /* No errors detected. */ bfd_reloc_ok, /* The relocation was performed, but there was an overflow. */ bfd_reloc_overflow, /* The address to relocate was not within the section supplied. */ bfd_reloc_outofrange, /* Used by special functions. */ bfd_reloc_continue, /* Unsupported relocation size requested. */ bfd_reloc_notsupported, /* Unused. */ bfd_reloc_other, /* The symbol to relocate against was undefined. */ bfd_reloc_undefined, /* The relocation was performed, but may not be ok - presently generated only when linking i960 coff files with i960 b.out symbols. If this type is returned, the error_message argument to bfd_perform_relocation will be set. */ bfd_reloc_dangerous @} bfd_reloc_status_type; typedef struct reloc_cache_entry @{ /* A pointer into the canonical table of pointers. */ struct bfd_symbol **sym_ptr_ptr; /* offset in section. */ bfd_size_type address; /* addend for relocation value. */ bfd_vma addend; /* Pointer to how to perform the required relocation. */ reloc_howto_type *howto; @} arelent; @end example @strong{Description}@* Here is a description of each of the fields within an @code{arelent}: @itemize @bullet @item @code{sym_ptr_ptr} @end itemize The symbol table pointer points to a pointer to the symbol associated with the relocation request. It is the pointer into the table returned by the back end's @code{canonicalize_symtab} action. @xref{Symbols}. The symbol is referenced through a pointer to a pointer so that tools like the linker can fix up all the symbols of the same name by modifying only one pointer. The relocation routine looks in the symbol and uses the base of the section the symbol is attached to and the value of the symbol as the initial relocation offset. If the symbol pointer is zero, then the section provided is looked up. @itemize @bullet @item @code{address} @end itemize The @code{address} field gives the offset in bytes from the base of the section data which owns the relocation record to the first byte of relocatable information. The actual data relocated will be relative to this point; for example, a relocation type which modifies the bottom two bytes of a four byte word would not touch the first byte pointed to in a big endian world. @itemize @bullet @item @code{addend} @end itemize The @code{addend} is a value provided by the back end to be added (!) to the relocation offset. Its interpretation is dependent upon the howto. For example, on the 68k the code: @example char foo[]; main() @{ return foo[0x12345678]; @} @end example Could be compiled into: @example linkw fp,#-4 moveb @@#12345678,d0 extbl d0 unlk fp rts @end example This could create a reloc pointing to @code{foo}, but leave the offset in the data, something like: @example RELOCATION RECORDS FOR [.text]: offset type value 00000006 32 _foo 00000000 4e56 fffc ; linkw fp,#-4 00000004 1039 1234 5678 ; moveb @@#12345678,d0 0000000a 49c0 ; extbl d0 0000000c 4e5e ; unlk fp 0000000e 4e75 ; rts @end example Using coff and an 88k, some instructions don't have enough space in them to represent the full address range, and pointers have to be loaded in two parts. So you'd get something like: @example or.u r13,r0,hi16(_foo+0x12345678) ld.b r2,r13,lo16(_foo+0x12345678) jmp r1 @end example This should create two relocs, both pointing to @code{_foo}, and with 0x12340000 in their addend field. The data would consist of: @example RELOCATION RECORDS FOR [.text]: offset type value 00000002 HVRT16 _foo+0x12340000 00000006 LVRT16 _foo+0x12340000 00000000 5da05678 ; or.u r13,r0,0x5678 00000004 1c4d5678 ; ld.b r2,r13,0x5678 00000008 f400c001 ; jmp r1 @end example The relocation routine digs out the value from the data, adds it to the addend to get the original offset, and then adds the value of @code{_foo}. Note that all 32 bits have to be kept around somewhere, to cope with carry from bit 15 to bit 16. One further example is the sparc and the a.out format. The sparc has a similar problem to the 88k, in that some instructions don't have room for an entire offset, but on the sparc the parts are created in odd sized lumps. The designers of the a.out format chose to not use the data within the section for storing part of the offset; all the offset is kept within the reloc. Anything in the data should be ignored. @example save %sp,-112,%sp sethi %hi(_foo+0x12345678),%g2 ldsb [%g2+%lo(_foo+0x12345678)],%i0 ret restore @end example Both relocs contain a pointer to @code{foo}, and the offsets contain junk. @example RELOCATION RECORDS FOR [.text]: offset type value 00000004 HI22 _foo+0x12345678 00000008 LO10 _foo+0x12345678 00000000 9de3bf90 ; save %sp,-112,%sp 00000004 05000000 ; sethi %hi(_foo+0),%g2 00000008 f048a000 ; ldsb [%g2+%lo(_foo+0)],%i0 0000000c 81c7e008 ; ret 00000010 81e80000 ; restore @end example @itemize @bullet @item @code{howto} @end itemize The @code{howto} field can be imagined as a relocation instruction. It is a pointer to a structure which contains information on what to do with all of the other information in the reloc record and data section. A back end would normally have a relocation instruction set and turn relocations into pointers to the correct structure on input - but it would be possible to create each howto field on demand. @subsubsection @code{enum complain_overflow} Indicates what sort of overflow checking should be done when performing a relocation. @example enum complain_overflow @{ /* Do not complain on overflow. */ complain_overflow_dont, /* Complain if the value overflows when considered as a signed number one bit larger than the field. ie. A bitfield of N bits is allowed to represent -2**n to 2**n-1. */ complain_overflow_bitfield, /* Complain if the value overflows when considered as a signed number. */ complain_overflow_signed, /* Complain if the value overflows when considered as an unsigned number. */ complain_overflow_unsigned @}; @end example @subsubsection @code{reloc_howto_type} The @code{reloc_howto_type} is a structure which contains all the information that libbfd needs to know to tie up a back end's data. @example struct bfd_symbol; /* Forward declaration. */ struct reloc_howto_struct @{ /* The type field has mainly a documentary use - the back end can do what it wants with it, though normally the back end's external idea of what a reloc number is stored in this field. For example, a PC relative word relocation in a coff environment has the type 023 - because that's what the outside world calls a R_PCRWORD reloc. */ unsigned int type; /* The value the final relocation is shifted right by. This drops unwanted data from the relocation. */ unsigned int rightshift; /* The size of the item to be relocated. This is *not* a power-of-two measure. To get the number of bytes operated on by a type of relocation, use bfd_get_reloc_size. */ int size; /* The number of bits in the item to be relocated. This is used when doing overflow checking. */ unsigned int bitsize; /* Notes that the relocation is relative to the location in the data section of the addend. The relocation function will subtract from the relocation value the address of the location being relocated. */ bfd_boolean pc_relative; /* The bit position of the reloc value in the destination. The relocated value is left shifted by this amount. */ unsigned int bitpos; /* What type of overflow error should be checked for when relocating. */ enum complain_overflow complain_on_overflow; /* If this field is non null, then the supplied function is called rather than the normal function. This allows really strange relocation methods to be accommodated (e.g., i960 callj instructions). */ bfd_reloc_status_type (*special_function) (bfd *, arelent *, struct bfd_symbol *, void *, asection *, bfd *, char **); /* The textual name of the relocation type. */ char *name; /* Some formats record a relocation addend in the section contents rather than with the relocation. For ELF formats this is the distinction between USE_REL and USE_RELA (though the code checks for USE_REL == 1/0). The value of this field is TRUE if the addend is recorded with the section contents; when performing a partial link (ld -r) the section contents (the data) will be modified. The value of this field is FALSE if addends are recorded with the relocation (in arelent.addend); when performing a partial link the relocation will be modified. All relocations for all ELF USE_RELA targets should set this field to FALSE (values of TRUE should be looked on with suspicion). However, the converse is not true: not all relocations of all ELF USE_REL targets set this field to TRUE. Why this is so is peculiar to each particular target. For relocs that aren't used in partial links (e.g. GOT stuff) it doesn't matter what this is set to. */ bfd_boolean partial_inplace; /* src_mask selects the part of the instruction (or data) to be used in the relocation sum. If the target relocations don't have an addend in the reloc, eg. ELF USE_REL, src_mask will normally equal dst_mask to extract the addend from the section contents. If relocations do have an addend in the reloc, eg. ELF USE_RELA, this field should be zero. Non-zero values for ELF USE_RELA targets are bogus as in those cases the value in the dst_mask part of the section contents should be treated as garbage. */ bfd_vma src_mask; /* dst_mask selects which parts of the instruction (or data) are replaced with a relocated value. */ bfd_vma dst_mask; /* When some formats create PC relative instructions, they leave the value of the pc of the place being relocated in the offset slot of the instruction, so that a PC relative relocation can be made just by adding in an ordinary offset (e.g., sun3 a.out). Some formats leave the displacement part of an instruction empty (e.g., m88k bcs); this flag signals the fact. */ bfd_boolean pcrel_offset; @}; @end example @findex The HOWTO Macro @subsubsection @code{The HOWTO Macro} @strong{Description}@* The HOWTO define is horrible and will go away. @example #define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \ @{ (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC @} @end example @strong{Description}@* And will be replaced with the totally magic way. But for the moment, we are compatible, so do it this way. @example #define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \ HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \ NAME, FALSE, 0, 0, IN) @end example @strong{Description}@* This is used to fill in an empty howto entry in an array. @example #define EMPTY_HOWTO(C) \ HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \ NULL, FALSE, 0, 0, FALSE) @end example @strong{Description}@* Helper routine to turn a symbol into a relocation value. @example #define HOWTO_PREPARE(relocation, symbol) \ @{ \ if (symbol != NULL) \ @{ \ if (bfd_is_com_section (symbol->section)) \ @{ \ relocation = 0; \ @} \ else \ @{ \ relocation = symbol->value; \ @} \ @} \ @} @end example @findex bfd_get_reloc_size @subsubsection @code{bfd_get_reloc_size} @strong{Synopsis} @example unsigned int bfd_get_reloc_size (reloc_howto_type *); @end example @strong{Description}@* For a reloc_howto_type that operates on a fixed number of bytes, this returns the number of bytes operated on. @findex arelent_chain @subsubsection @code{arelent_chain} @strong{Description}@* How relocs are tied together in an @code{asection}: @example typedef struct relent_chain @{ arelent relent; struct relent_chain *next; @} arelent_chain; @end example @findex bfd_check_overflow @subsubsection @code{bfd_check_overflow} @strong{Synopsis} @example bfd_reloc_status_type bfd_check_overflow (enum complain_overflow how, unsigned int bitsize, unsigned int rightshift, unsigned int addrsize, bfd_vma relocation); @end example @strong{Description}@* Perform overflow checking on @var{relocation} which has @var{bitsize} significant bits and will be shifted right by @var{rightshift} bits, on a machine with addresses containing @var{addrsize} significant bits. The result is either of @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}. @findex bfd_perform_relocation @subsubsection @code{bfd_perform_relocation} @strong{Synopsis} @example bfd_reloc_status_type bfd_perform_relocation (bfd *abfd, arelent *reloc_entry, void *data, asection *input_section, bfd *output_bfd, char **error_message); @end example @strong{Description}@* If @var{output_bfd} is supplied to this function, the generated image will be relocatable; the relocations are copied to the output file after they have been changed to reflect the new state of the world. There are two ways of reflecting the results of partial linkage in an output file: by modifying the output data in place, and by modifying the relocation record. Some native formats (e.g., basic a.out and basic coff) have no way of specifying an addend in the relocation type, so the addend has to go in the output data. This is no big deal since in these formats the output data slot will always be big enough for the addend. Complex reloc types with addends were invented to solve just this problem. The @var{error_message} argument is set to an error message if this return @code{bfd_reloc_dangerous}. @findex bfd_install_relocation @subsubsection @code{bfd_install_relocation} @strong{Synopsis} @example bfd_reloc_status_type bfd_install_relocation (bfd *abfd, arelent *reloc_entry, void *data, bfd_vma data_start, asection *input_section, char **error_message); @end example @strong{Description}@* This looks remarkably like @code{bfd_perform_relocation}, except it does not expect that the section contents have been filled in. I.e., it's suitable for use when creating, rather than applying a relocation. For now, this function should be considered reserved for the assembler. @node howto manager, , typedef arelent, Relocations @subsection The howto manager When an application wants to create a relocation, but doesn't know what the target machine might call it, it can find out by using this bit of code. @findex bfd_reloc_code_type @subsubsection @code{bfd_reloc_code_type} @strong{Description}@* The insides of a reloc code. The idea is that, eventually, there will be one enumerator for every type of relocation we ever do. Pass one of these values to @code{bfd_reloc_type_lookup}, and it'll return a howto pointer. This does mean that the application must determine the correct enumerator value; you can't get a howto pointer from a random set of attributes. Here are the possible values for @code{enum bfd_reloc_code_real}: @deffn {} BFD_RELOC_64 @deffnx {} BFD_RELOC_32 @deffnx {} BFD_RELOC_26 @deffnx {} BFD_RELOC_24 @deffnx {} BFD_RELOC_16 @deffnx {} BFD_RELOC_14 @deffnx {} BFD_RELOC_8 Basic absolute relocations of N bits. @end deffn @deffn {} BFD_RELOC_64_PCREL @deffnx {} BFD_RELOC_32_PCREL @deffnx {} BFD_RELOC_24_PCREL @deffnx {} BFD_RELOC_16_PCREL @deffnx {} BFD_RELOC_12_PCREL @deffnx {} BFD_RELOC_8_PCREL PC-relative relocations. Sometimes these are relative to the address of the relocation itself; sometimes they are relative to the start of the section containing the relocation. It depends on the specific target. The 24-bit relocation is used in some Intel 960 configurations. @end deffn @deffn {} BFD_RELOC_32_SECREL Section relative relocations. Some targets need this for DWARF2. @end deffn @deffn {} BFD_RELOC_32_GOT_PCREL @deffnx {} BFD_RELOC_16_GOT_PCREL @deffnx {} BFD_RELOC_8_GOT_PCREL @deffnx {} BFD_RELOC_32_GOTOFF @deffnx {} BFD_RELOC_16_GOTOFF @deffnx {} BFD_RELOC_LO16_GOTOFF @deffnx {} BFD_RELOC_HI16_GOTOFF @deffnx {} BFD_RELOC_HI16_S_GOTOFF @deffnx {} BFD_RELOC_8_GOTOFF @deffnx {} BFD_RELOC_64_PLT_PCREL @deffnx {} BFD_RELOC_32_PLT_PCREL @deffnx {} BFD_RELOC_24_PLT_PCREL @deffnx {} BFD_RELOC_16_PLT_PCREL @deffnx {} BFD_RELOC_8_PLT_PCREL @deffnx {} BFD_RELOC_64_PLTOFF @deffnx {} BFD_RELOC_32_PLTOFF @deffnx {} BFD_RELOC_16_PLTOFF @deffnx {} BFD_RELOC_LO16_PLTOFF @deffnx {} BFD_RELOC_HI16_PLTOFF @deffnx {} BFD_RELOC_HI16_S_PLTOFF @deffnx {} BFD_RELOC_8_PLTOFF For ELF. @end deffn @deffn {} BFD_RELOC_68K_GLOB_DAT @deffnx {} BFD_RELOC_68K_JMP_SLOT @deffnx {} BFD_RELOC_68K_RELATIVE Relocations used by 68K ELF. @end deffn @deffn {} BFD_RELOC_32_BASEREL @deffnx {} BFD_RELOC_16_BASEREL @deffnx {} BFD_RELOC_LO16_BASEREL @deffnx {} BFD_RELOC_HI16_BASEREL @deffnx {} BFD_RELOC_HI16_S_BASEREL @deffnx {} BFD_RELOC_8_BASEREL @deffnx {} BFD_RELOC_RVA Linkage-table relative. @end deffn @deffn {} BFD_RELOC_8_FFnn Absolute 8-bit relocation, but used to form an address like 0xFFnn. @end deffn @deffn {} BFD_RELOC_32_PCREL_S2 @deffnx {} BFD_RELOC_16_PCREL_S2 @deffnx {} BFD_RELOC_23_PCREL_S2 These PC-relative relocations are stored as word displacements -- i.e., byte displacements shifted right two bits. The 30-bit word displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the SPARC. (SPARC tools generally refer to this as <>.) The signed 16-bit displacement is used on the MIPS, and the 23-bit displacement is used on the Alpha. @end deffn @deffn {} BFD_RELOC_HI22 @deffnx {} BFD_RELOC_LO10 High 22 bits and low 10 bits of 32-bit value, placed into lower bits of the target word. These are used on the SPARC. @end deffn @deffn {} BFD_RELOC_GPREL16 @deffnx {} BFD_RELOC_GPREL32 For systems that allocate a Global Pointer register, these are displacements off that register. These relocation types are handled specially, because the value the register will have is decided relatively late. @end deffn @deffn {} BFD_RELOC_I960_CALLJ Reloc types used for i960/b.out. @end deffn @deffn {} BFD_RELOC_NONE @deffnx {} BFD_RELOC_SPARC_WDISP22 @deffnx {} BFD_RELOC_SPARC22 @deffnx {} BFD_RELOC_SPARC13 @deffnx {} BFD_RELOC_SPARC_GOT10 @deffnx {} BFD_RELOC_SPARC_GOT13 @deffnx {} BFD_RELOC_SPARC_GOT22 @deffnx {} BFD_RELOC_SPARC_PC10 @deffnx {} BFD_RELOC_SPARC_PC22 @deffnx {} BFD_RELOC_SPARC_WPLT30 @deffnx {} BFD_RELOC_SPARC_COPY @deffnx {} BFD_RELOC_SPARC_GLOB_DAT @deffnx {} BFD_RELOC_SPARC_JMP_SLOT @deffnx {} BFD_RELOC_SPARC_RELATIVE @deffnx {} BFD_RELOC_SPARC_UA16 @deffnx {} BFD_RELOC_SPARC_UA32 @deffnx {} BFD_RELOC_SPARC_UA64 SPARC ELF relocations. There is probably some overlap with other relocation types already defined. @end deffn @deffn {} BFD_RELOC_SPARC_BASE13 @deffnx {} BFD_RELOC_SPARC_BASE22 I think these are specific to SPARC a.out (e.g., Sun 4). @end deffn @deffn {} BFD_RELOC_SPARC_64 @deffnx {} BFD_RELOC_SPARC_10 @deffnx {} BFD_RELOC_SPARC_11 @deffnx {} BFD_RELOC_SPARC_OLO10 @deffnx {} BFD_RELOC_SPARC_HH22 @deffnx {} BFD_RELOC_SPARC_HM10 @deffnx {} BFD_RELOC_SPARC_LM22 @deffnx {} BFD_RELOC_SPARC_PC_HH22 @deffnx {} BFD_RELOC_SPARC_PC_HM10 @deffnx {} BFD_RELOC_SPARC_PC_LM22 @deffnx {} BFD_RELOC_SPARC_WDISP16 @deffnx {} BFD_RELOC_SPARC_WDISP19 @deffnx {} BFD_RELOC_SPARC_7 @deffnx {} BFD_RELOC_SPARC_6 @deffnx {} BFD_RELOC_SPARC_5 @deffnx {} BFD_RELOC_SPARC_DISP64 @deffnx {} BFD_RELOC_SPARC_PLT32 @deffnx {} BFD_RELOC_SPARC_PLT64 @deffnx {} BFD_RELOC_SPARC_HIX22 @deffnx {} BFD_RELOC_SPARC_LOX10 @deffnx {} BFD_RELOC_SPARC_H44 @deffnx {} BFD_RELOC_SPARC_M44 @deffnx {} BFD_RELOC_SPARC_L44 @deffnx {} BFD_RELOC_SPARC_REGISTER SPARC64 relocations @end deffn @deffn {} BFD_RELOC_SPARC_REV32 SPARC little endian relocation @end deffn @deffn {} BFD_RELOC_SPARC_TLS_GD_HI22 @deffnx {} BFD_RELOC_SPARC_TLS_GD_LO10 @deffnx {} BFD_RELOC_SPARC_TLS_GD_ADD @deffnx {} BFD_RELOC_SPARC_TLS_GD_CALL @deffnx {} BFD_RELOC_SPARC_TLS_LDM_HI22 @deffnx {} BFD_RELOC_SPARC_TLS_LDM_LO10 @deffnx {} BFD_RELOC_SPARC_TLS_LDM_ADD @deffnx {} BFD_RELOC_SPARC_TLS_LDM_CALL @deffnx {} BFD_RELOC_SPARC_TLS_LDO_HIX22 @deffnx {} BFD_RELOC_SPARC_TLS_LDO_LOX10 @deffnx {} BFD_RELOC_SPARC_TLS_LDO_ADD @deffnx {} BFD_RELOC_SPARC_TLS_IE_HI22 @deffnx {} BFD_RELOC_SPARC_TLS_IE_LO10 @deffnx {} BFD_RELOC_SPARC_TLS_IE_LD @deffnx {} BFD_RELOC_SPARC_TLS_IE_LDX @deffnx {} BFD_RELOC_SPARC_TLS_IE_ADD @deffnx {} BFD_RELOC_SPARC_TLS_LE_HIX22 @deffnx {} BFD_RELOC_SPARC_TLS_LE_LOX10 @deffnx {} BFD_RELOC_SPARC_TLS_DTPMOD32 @deffnx {} BFD_RELOC_SPARC_TLS_DTPMOD64 @deffnx {} BFD_RELOC_SPARC_TLS_DTPOFF32 @deffnx {} BFD_RELOC_SPARC_TLS_DTPOFF64 @deffnx {} BFD_RELOC_SPARC_TLS_TPOFF32 @deffnx {} BFD_RELOC_SPARC_TLS_TPOFF64 SPARC TLS relocations @end deffn @deffn {} BFD_RELOC_SPU_IMM7 @deffnx {} BFD_RELOC_SPU_IMM8 @deffnx {} BFD_RELOC_SPU_IMM10 @deffnx {} BFD_RELOC_SPU_IMM10W @deffnx {} BFD_RELOC_SPU_IMM16 @deffnx {} BFD_RELOC_SPU_IMM16W @deffnx {} BFD_RELOC_SPU_IMM18 @deffnx {} BFD_RELOC_SPU_PCREL9a @deffnx {} BFD_RELOC_SPU_PCREL9b @deffnx {} BFD_RELOC_SPU_PCREL16 @deffnx {} BFD_RELOC_SPU_LO16 @deffnx {} BFD_RELOC_SPU_HI16 SPU Relocations. @end deffn @deffn {} BFD_RELOC_ALPHA_GPDISP_HI16 Alpha ECOFF and ELF relocations. Some of these treat the symbol or "addend" in some special way. For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when writing; when reading, it will be the absolute section symbol. The addend is the displacement in bytes of the "lda" instruction from the "ldah" instruction (which is at the address of this reloc). @end deffn @deffn {} BFD_RELOC_ALPHA_GPDISP_LO16 For GPDISP_LO16 ("ignore") relocations, the symbol is handled as with GPDISP_HI16 relocs. The addend is ignored when writing the relocations out, and is filled in with the file's GP value on reading, for convenience. @end deffn @deffn {} BFD_RELOC_ALPHA_GPDISP The ELF GPDISP relocation is exactly the same as the GPDISP_HI16 relocation except that there is no accompanying GPDISP_LO16 relocation. @end deffn @deffn {} BFD_RELOC_ALPHA_LITERAL @deffnx {} BFD_RELOC_ALPHA_ELF_LITERAL @deffnx {} BFD_RELOC_ALPHA_LITUSE The Alpha LITERAL/LITUSE relocs are produced by a symbol reference; the assembler turns it into a LDQ instruction to load the address of the symbol, and then fills in a register in the real instruction. The LITERAL reloc, at the LDQ instruction, refers to the .lita section symbol. The addend is ignored when writing, but is filled in with the file's GP value on reading, for convenience, as with the GPDISP_LO16 reloc. The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16. It should refer to the symbol to be referenced, as with 16_GOTOFF, but it generates output not based on the position within the .got section, but relative to the GP value chosen for the file during the final link stage. The LITUSE reloc, on the instruction using the loaded address, gives information to the linker that it might be able to use to optimize away some literal section references. The symbol is ignored (read as the absolute section symbol), and the "addend" indicates the type of instruction using the register: 1 - "memory" fmt insn 2 - byte-manipulation (byte offset reg) 3 - jsr (target of branch) @end deffn @deffn {} BFD_RELOC_ALPHA_HINT The HINT relocation indicates a value that should be filled into the "hint" field of a jmp/jsr/ret instruction, for possible branch- prediction logic which may be provided on some processors. @end deffn @deffn {} BFD_RELOC_ALPHA_LINKAGE The LINKAGE relocation outputs a linkage pair in the object file, which is filled by the linker. @end deffn @deffn {} BFD_RELOC_ALPHA_CODEADDR The CODEADDR relocation outputs a STO_CA in the object file, which is filled by the linker. @end deffn @deffn {} BFD_RELOC_ALPHA_GPREL_HI16 @deffnx {} BFD_RELOC_ALPHA_GPREL_LO16 The GPREL_HI/LO relocations together form a 32-bit offset from the GP register. @end deffn @deffn {} BFD_RELOC_ALPHA_BRSGP Like BFD_RELOC_23_PCREL_S2, except that the source and target must share a common GP, and the target address is adjusted for STO_ALPHA_STD_GPLOAD. @end deffn @deffn {} BFD_RELOC_ALPHA_TLSGD @deffnx {} BFD_RELOC_ALPHA_TLSLDM @deffnx {} BFD_RELOC_ALPHA_DTPMOD64 @deffnx {} BFD_RELOC_ALPHA_GOTDTPREL16 @deffnx {} BFD_RELOC_ALPHA_DTPREL64 @deffnx {} BFD_RELOC_ALPHA_DTPREL_HI16 @deffnx {} BFD_RELOC_ALPHA_DTPREL_LO16 @deffnx {} BFD_RELOC_ALPHA_DTPREL16 @deffnx {} BFD_RELOC_ALPHA_GOTTPREL16 @deffnx {} BFD_RELOC_ALPHA_TPREL64 @deffnx {} BFD_RELOC_ALPHA_TPREL_HI16 @deffnx {} BFD_RELOC_ALPHA_TPREL_LO16 @deffnx {} BFD_RELOC_ALPHA_TPREL16 Alpha thread-local storage relocations. @end deffn @deffn {} BFD_RELOC_MIPS_JMP Bits 27..2 of the relocation address shifted right 2 bits; simple reloc otherwise. @end deffn @deffn {} BFD_RELOC_MIPS16_JMP The MIPS16 jump instruction. @end deffn @deffn {} BFD_RELOC_MIPS16_GPREL MIPS16 GP relative reloc. @end deffn @deffn {} BFD_RELOC_HI16 High 16 bits of 32-bit value; simple reloc. @end deffn @deffn {} BFD_RELOC_HI16_S High 16 bits of 32-bit value but the low 16 bits will be sign extended and added to form the final result. If the low 16 bits form a negative number, we need to add one to the high value to compensate for the borrow when the low bits are added. @end deffn @deffn {} BFD_RELOC_LO16 Low 16 bits. @end deffn @deffn {} BFD_RELOC_HI16_PCREL High 16 bits of 32-bit pc-relative value @end deffn @deffn {} BFD_RELOC_HI16_S_PCREL High 16 bits of 32-bit pc-relative value, adjusted @end deffn @deffn {} BFD_RELOC_LO16_PCREL Low 16 bits of pc-relative value @end deffn @deffn {} BFD_RELOC_MIPS16_HI16 MIPS16 high 16 bits of 32-bit value. @end deffn @deffn {} BFD_RELOC_MIPS16_HI16_S MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign extended and added to form the final result. If the low 16 bits form a negative number, we need to add one to the high value to compensate for the borrow when the low bits are added. @end deffn @deffn {} BFD_RELOC_MIPS16_LO16 MIPS16 low 16 bits. @end deffn @deffn {} BFD_RELOC_MIPS_LITERAL Relocation against a MIPS literal section. @end deffn @deffn {} BFD_RELOC_MIPS_GOT16 @deffnx {} BFD_RELOC_MIPS_CALL16 @deffnx {} BFD_RELOC_MIPS_GOT_HI16 @deffnx {} BFD_RELOC_MIPS_GOT_LO16 @deffnx {} BFD_RELOC_MIPS_CALL_HI16 @deffnx {} BFD_RELOC_MIPS_CALL_LO16 @deffnx {} BFD_RELOC_MIPS_SUB @deffnx {} BFD_RELOC_MIPS_GOT_PAGE @deffnx {} BFD_RELOC_MIPS_GOT_OFST @deffnx {} BFD_RELOC_MIPS_GOT_DISP @deffnx {} BFD_RELOC_MIPS_SHIFT5 @deffnx {} BFD_RELOC_MIPS_SHIFT6 @deffnx {} BFD_RELOC_MIPS_INSERT_A @deffnx {} BFD_RELOC_MIPS_INSERT_B @deffnx {} BFD_RELOC_MIPS_DELETE @deffnx {} BFD_RELOC_MIPS_HIGHEST @deffnx {} BFD_RELOC_MIPS_HIGHER @deffnx {} BFD_RELOC_MIPS_SCN_DISP @deffnx {} BFD_RELOC_MIPS_REL16 @deffnx {} BFD_RELOC_MIPS_RELGOT @deffnx {} BFD_RELOC_MIPS_JALR @deffnx {} BFD_RELOC_MIPS_TLS_DTPMOD32 @deffnx {} BFD_RELOC_MIPS_TLS_DTPREL32 @deffnx {} BFD_RELOC_MIPS_TLS_DTPMOD64 @deffnx {} BFD_RELOC_MIPS_TLS_DTPREL64 @deffnx {} BFD_RELOC_MIPS_TLS_GD @deffnx {} BFD_RELOC_MIPS_TLS_LDM @deffnx {} BFD_RELOC_MIPS_TLS_DTPREL_HI16 @deffnx {} BFD_RELOC_MIPS_TLS_DTPREL_LO16 @deffnx {} BFD_RELOC_MIPS_TLS_GOTTPREL @deffnx {} BFD_RELOC_MIPS_TLS_TPREL32 @deffnx {} BFD_RELOC_MIPS_TLS_TPREL64 @deffnx {} BFD_RELOC_MIPS_TLS_TPREL_HI16 @deffnx {} BFD_RELOC_MIPS_TLS_TPREL_LO16 MIPS ELF relocations. @end deffn @deffn {} BFD_RELOC_MIPS_COPY @deffnx {} BFD_RELOC_MIPS_JUMP_SLOT MIPS ELF relocations (VxWorks extensions). @end deffn @deffn {} BFD_RELOC_FRV_LABEL16 @deffnx {} BFD_RELOC_FRV_LABEL24 @deffnx {} BFD_RELOC_FRV_LO16 @deffnx {} BFD_RELOC_FRV_HI16 @deffnx {} BFD_RELOC_FRV_GPREL12 @deffnx {} BFD_RELOC_FRV_GPRELU12 @deffnx {} BFD_RELOC_FRV_GPREL32 @deffnx {} BFD_RELOC_FRV_GPRELHI @deffnx {} BFD_RELOC_FRV_GPRELLO @deffnx {} BFD_RELOC_FRV_GOT12 @deffnx {} BFD_RELOC_FRV_GOTHI @deffnx {} BFD_RELOC_FRV_GOTLO @deffnx {} BFD_RELOC_FRV_FUNCDESC @deffnx {} BFD_RELOC_FRV_FUNCDESC_GOT12 @deffnx {} BFD_RELOC_FRV_FUNCDESC_GOTHI @deffnx {} BFD_RELOC_FRV_FUNCDESC_GOTLO @deffnx {} BFD_RELOC_FRV_FUNCDESC_VALUE @deffnx {} BFD_RELOC_FRV_FUNCDESC_GOTOFF12 @deffnx {} BFD_RELOC_FRV_FUNCDESC_GOTOFFHI @deffnx {} BFD_RELOC_FRV_FUNCDESC_GOTOFFLO @deffnx {} BFD_RELOC_FRV_GOTOFF12 @deffnx {} BFD_RELOC_FRV_GOTOFFHI @deffnx {} BFD_RELOC_FRV_GOTOFFLO @deffnx {} BFD_RELOC_FRV_GETTLSOFF @deffnx {} BFD_RELOC_FRV_TLSDESC_VALUE @deffnx {} BFD_RELOC_FRV_GOTTLSDESC12 @deffnx {} BFD_RELOC_FRV_GOTTLSDESCHI @deffnx {} BFD_RELOC_FRV_GOTTLSDESCLO @deffnx {} BFD_RELOC_FRV_TLSMOFF12 @deffnx {} BFD_RELOC_FRV_TLSMOFFHI @deffnx {} BFD_RELOC_FRV_TLSMOFFLO @deffnx {} BFD_RELOC_FRV_GOTTLSOFF12 @deffnx {} BFD_RELOC_FRV_GOTTLSOFFHI @deffnx {} BFD_RELOC_FRV_GOTTLSOFFLO @deffnx {} BFD_RELOC_FRV_TLSOFF @deffnx {} BFD_RELOC_FRV_TLSDESC_RELAX @deffnx {} BFD_RELOC_FRV_GETTLSOFF_RELAX @deffnx {} BFD_RELOC_FRV_TLSOFF_RELAX @deffnx {} BFD_RELOC_FRV_TLSMOFF Fujitsu Frv Relocations. @end deffn @deffn {} BFD_RELOC_MN10300_GOTOFF24 This is a 24bit GOT-relative reloc for the mn10300. @end deffn @deffn {} BFD_RELOC_MN10300_GOT32 This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes in the instruction. @end deffn @deffn {} BFD_RELOC_MN10300_GOT24 This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes in the instruction. @end deffn @deffn {} BFD_RELOC_MN10300_GOT16 This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes in the instruction. @end deffn @deffn {} BFD_RELOC_MN10300_COPY Copy symbol at runtime. @end deffn @deffn {} BFD_RELOC_MN10300_GLOB_DAT Create GOT entry. @end deffn @deffn {} BFD_RELOC_MN10300_JMP_SLOT Create PLT entry. @end deffn @deffn {} BFD_RELOC_MN10300_RELATIVE Adjust by program base. @end deffn @deffn {} BFD_RELOC_386_GOT32 @deffnx {} BFD_RELOC_386_PLT32 @deffnx {} BFD_RELOC_386_COPY @deffnx {} BFD_RELOC_386_GLOB_DAT @deffnx {} BFD_RELOC_386_JUMP_SLOT @deffnx {} BFD_RELOC_386_RELATIVE @deffnx {} BFD_RELOC_386_GOTOFF @deffnx {} BFD_RELOC_386_GOTPC @deffnx {} BFD_RELOC_386_TLS_TPOFF @deffnx {} BFD_RELOC_386_TLS_IE @deffnx {} BFD_RELOC_386_TLS_GOTIE @deffnx {} BFD_RELOC_386_TLS_LE @deffnx {} BFD_RELOC_386_TLS_GD @deffnx {} BFD_RELOC_386_TLS_LDM @deffnx {} BFD_RELOC_386_TLS_LDO_32 @deffnx {} BFD_RELOC_386_TLS_IE_32 @deffnx {} BFD_RELOC_386_TLS_LE_32 @deffnx {} BFD_RELOC_386_TLS_DTPMOD32 @deffnx {} BFD_RELOC_386_TLS_DTPOFF32 @deffnx {} BFD_RELOC_386_TLS_TPOFF32 @deffnx {} BFD_RELOC_386_TLS_GOTDESC @deffnx {} BFD_RELOC_386_TLS_DESC_CALL @deffnx {} BFD_RELOC_386_TLS_DESC i386/elf relocations @end deffn @deffn {} BFD_RELOC_X86_64_GOT32 @deffnx {} BFD_RELOC_X86_64_PLT32 @deffnx {} BFD_RELOC_X86_64_COPY @deffnx {} BFD_RELOC_X86_64_GLOB_DAT @deffnx {} BFD_RELOC_X86_64_JUMP_SLOT @deffnx {} BFD_RELOC_X86_64_RELATIVE @deffnx {} BFD_RELOC_X86_64_GOTPCREL @deffnx {} BFD_RELOC_X86_64_32S @deffnx {} BFD_RELOC_X86_64_DTPMOD64 @deffnx {} BFD_RELOC_X86_64_DTPOFF64 @deffnx {} BFD_RELOC_X86_64_TPOFF64 @deffnx {} BFD_RELOC_X86_64_TLSGD @deffnx {} BFD_RELOC_X86_64_TLSLD @deffnx {} BFD_RELOC_X86_64_DTPOFF32 @deffnx {} BFD_RELOC_X86_64_GOTTPOFF @deffnx {} BFD_RELOC_X86_64_TPOFF32 @deffnx {} BFD_RELOC_X86_64_GOTOFF64 @deffnx {} BFD_RELOC_X86_64_GOTPC32 @deffnx {} BFD_RELOC_X86_64_GOT64 @deffnx {} BFD_RELOC_X86_64_GOTPCREL64 @deffnx {} BFD_RELOC_X86_64_GOTPC64 @deffnx {} BFD_RELOC_X86_64_GOTPLT64 @deffnx {} BFD_RELOC_X86_64_PLTOFF64 @deffnx {} BFD_RELOC_X86_64_GOTPC32_TLSDESC @deffnx {} BFD_RELOC_X86_64_TLSDESC_CALL @deffnx {} BFD_RELOC_X86_64_TLSDESC x86-64/elf relocations @end deffn @deffn {} BFD_RELOC_NS32K_IMM_8 @deffnx {} BFD_RELOC_NS32K_IMM_16 @deffnx {} BFD_RELOC_NS32K_IMM_32 @deffnx {} BFD_RELOC_NS32K_IMM_8_PCREL @deffnx {} BFD_RELOC_NS32K_IMM_16_PCREL @deffnx {} BFD_RELOC_NS32K_IMM_32_PCREL @deffnx {} BFD_RELOC_NS32K_DISP_8 @deffnx {} BFD_RELOC_NS32K_DISP_16 @deffnx {} BFD_RELOC_NS32K_DISP_32 @deffnx {} BFD_RELOC_NS32K_DISP_8_PCREL @deffnx {} BFD_RELOC_NS32K_DISP_16_PCREL @deffnx {} BFD_RELOC_NS32K_DISP_32_PCREL ns32k relocations @end deffn @deffn {} BFD_RELOC_PDP11_DISP_8_PCREL @deffnx {} BFD_RELOC_PDP11_DISP_6_PCREL PDP11 relocations @end deffn @deffn {} BFD_RELOC_PJ_CODE_HI16 @deffnx {} BFD_RELOC_PJ_CODE_LO16 @deffnx {} BFD_RELOC_PJ_CODE_DIR16 @deffnx {} BFD_RELOC_PJ_CODE_DIR32 @deffnx {} BFD_RELOC_PJ_CODE_REL16 @deffnx {} BFD_RELOC_PJ_CODE_REL32 Picojava relocs. Not all of these appear in object files. @end deffn @deffn {} BFD_RELOC_PPC_B26 @deffnx {} BFD_RELOC_PPC_BA26 @deffnx {} BFD_RELOC_PPC_TOC16 @deffnx {} BFD_RELOC_PPC_B16 @deffnx {} BFD_RELOC_PPC_B16_BRTAKEN @deffnx {} BFD_RELOC_PPC_B16_BRNTAKEN @deffnx {} BFD_RELOC_PPC_BA16 @deffnx {} BFD_RELOC_PPC_BA16_BRTAKEN @deffnx {} BFD_RELOC_PPC_BA16_BRNTAKEN @deffnx {} BFD_RELOC_PPC_COPY @deffnx {} BFD_RELOC_PPC_GLOB_DAT @deffnx {} BFD_RELOC_PPC_JMP_SLOT @deffnx {} BFD_RELOC_PPC_RELATIVE @deffnx {} BFD_RELOC_PPC_LOCAL24PC @deffnx {} BFD_RELOC_PPC_EMB_NADDR32 @deffnx {} BFD_RELOC_PPC_EMB_NADDR16 @deffnx {} BFD_RELOC_PPC_EMB_NADDR16_LO @deffnx {} BFD_RELOC_PPC_EMB_NADDR16_HI @deffnx {} BFD_RELOC_PPC_EMB_NADDR16_HA @deffnx {} BFD_RELOC_PPC_EMB_SDAI16 @deffnx {} BFD_RELOC_PPC_EMB_SDA2I16 @deffnx {} BFD_RELOC_PPC_EMB_SDA2REL @deffnx {} BFD_RELOC_PPC_EMB_SDA21 @deffnx {} BFD_RELOC_PPC_EMB_MRKREF @deffnx {} BFD_RELOC_PPC_EMB_RELSEC16 @deffnx {} BFD_RELOC_PPC_EMB_RELST_LO @deffnx {} BFD_RELOC_PPC_EMB_RELST_HI @deffnx {} BFD_RELOC_PPC_EMB_RELST_HA @deffnx {} BFD_RELOC_PPC_EMB_BIT_FLD @deffnx {} BFD_RELOC_PPC_EMB_RELSDA @deffnx {} BFD_RELOC_PPC64_HIGHER @deffnx {} BFD_RELOC_PPC64_HIGHER_S @deffnx {} BFD_RELOC_PPC64_HIGHEST @deffnx {} BFD_RELOC_PPC64_HIGHEST_S @deffnx {} BFD_RELOC_PPC64_TOC16_LO @deffnx {} BFD_RELOC_PPC64_TOC16_HI @deffnx {} BFD_RELOC_PPC64_TOC16_HA @deffnx {} BFD_RELOC_PPC64_TOC @deffnx {} BFD_RELOC_PPC64_PLTGOT16 @deffnx {} BFD_RELOC_PPC64_PLTGOT16_LO @deffnx {} BFD_RELOC_PPC64_PLTGOT16_HI @deffnx {} BFD_RELOC_PPC64_PLTGOT16_HA @deffnx {} BFD_RELOC_PPC64_ADDR16_DS @deffnx {} BFD_RELOC_PPC64_ADDR16_LO_DS @deffnx {} BFD_RELOC_PPC64_GOT16_DS @deffnx {} BFD_RELOC_PPC64_GOT16_LO_DS @deffnx {} BFD_RELOC_PPC64_PLT16_LO_DS @deffnx {} BFD_RELOC_PPC64_SECTOFF_DS @deffnx {} BFD_RELOC_PPC64_SECTOFF_LO_DS @deffnx {} BFD_RELOC_PPC64_TOC16_DS @deffnx {} BFD_RELOC_PPC64_TOC16_LO_DS @deffnx {} BFD_RELOC_PPC64_PLTGOT16_DS @deffnx {} BFD_RELOC_PPC64_PLTGOT16_LO_DS Power(rs6000) and PowerPC relocations. @end deffn @deffn {} BFD_RELOC_PPC_TLS @deffnx {} BFD_RELOC_PPC_DTPMOD @deffnx {} BFD_RELOC_PPC_TPREL16 @deffnx {} BFD_RELOC_PPC_TPREL16_LO @deffnx {} BFD_RELOC_PPC_TPREL16_HI @deffnx {} BFD_RELOC_PPC_TPREL16_HA @deffnx {} BFD_RELOC_PPC_TPREL @deffnx {} BFD_RELOC_PPC_DTPREL16 @deffnx {} BFD_RELOC_PPC_DTPREL16_LO @deffnx {} BFD_RELOC_PPC_DTPREL16_HI @deffnx {} BFD_RELOC_PPC_DTPREL16_HA @deffnx {} BFD_RELOC_PPC_DTPREL @deffnx {} BFD_RELOC_PPC_GOT_TLSGD16 @deffnx {} BFD_RELOC_PPC_GOT_TLSGD16_LO @deffnx {} BFD_RELOC_PPC_GOT_TLSGD16_HI @deffnx {} BFD_RELOC_PPC_GOT_TLSGD16_HA @deffnx {} BFD_RELOC_PPC_GOT_TLSLD16 @deffnx {} BFD_RELOC_PPC_GOT_TLSLD16_LO @deffnx {} BFD_RELOC_PPC_GOT_TLSLD16_HI @deffnx {} BFD_RELOC_PPC_GOT_TLSLD16_HA @deffnx {} BFD_RELOC_PPC_GOT_TPREL16 @deffnx {} BFD_RELOC_PPC_GOT_TPREL16_LO @deffnx {} BFD_RELOC_PPC_GOT_TPREL16_HI @deffnx {} BFD_RELOC_PPC_GOT_TPREL16_HA @deffnx {} BFD_RELOC_PPC_GOT_DTPREL16 @deffnx {} BFD_RELOC_PPC_GOT_DTPREL16_LO @deffnx {} BFD_RELOC_PPC_GOT_DTPREL16_HI @deffnx {} BFD_RELOC_PPC_GOT_DTPREL16_HA @deffnx {} BFD_RELOC_PPC64_TPREL16_DS @deffnx {} BFD_RELOC_PPC64_TPREL16_LO_DS @deffnx {} BFD_RELOC_PPC64_TPREL16_HIGHER @deffnx {} BFD_RELOC_PPC64_TPREL16_HIGHERA @deffnx {} BFD_RELOC_PPC64_TPREL16_HIGHEST @deffnx {} BFD_RELOC_PPC64_TPREL16_HIGHESTA @deffnx {} BFD_RELOC_PPC64_DTPREL16_DS @deffnx {} BFD_RELOC_PPC64_DTPREL16_LO_DS @deffnx {} BFD_RELOC_PPC64_DTPREL16_HIGHER @deffnx {} BFD_RELOC_PPC64_DTPREL16_HIGHERA @deffnx {} BFD_RELOC_PPC64_DTPREL16_HIGHEST @deffnx {} BFD_RELOC_PPC64_DTPREL16_HIGHESTA PowerPC and PowerPC64 thread-local storage relocations. @end deffn @deffn {} BFD_RELOC_I370_D12 IBM 370/390 relocations @end deffn @deffn {} BFD_RELOC_CTOR The type of reloc used to build a constructor table - at the moment probably a 32 bit wide absolute relocation, but the target can choose. It generally does map to one of the other relocation types. @end deffn @deffn {} BFD_RELOC_ARM_PCREL_BRANCH ARM 26 bit pc-relative branch. The lowest two bits must be zero and are not stored in the instruction. @end deffn @deffn {} BFD_RELOC_ARM_PCREL_BLX ARM 26 bit pc-relative branch. The lowest bit must be zero and is not stored in the instruction. The 2nd lowest bit comes from a 1 bit field in the instruction. @end deffn @deffn {} BFD_RELOC_THUMB_PCREL_BLX Thumb 22 bit pc-relative branch. The lowest bit must be zero and is not stored in the instruction. The 2nd lowest bit comes from a 1 bit field in the instruction. @end deffn @deffn {} BFD_RELOC_ARM_PCREL_CALL ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction. @end deffn @deffn {} BFD_RELOC_ARM_PCREL_JUMP ARM 26-bit pc-relative branch for B or conditional BL instruction. @end deffn @deffn {} BFD_RELOC_THUMB_PCREL_BRANCH7 @deffnx {} BFD_RELOC_THUMB_PCREL_BRANCH9 @deffnx {} BFD_RELOC_THUMB_PCREL_BRANCH12 @deffnx {} BFD_RELOC_THUMB_PCREL_BRANCH20 @deffnx {} BFD_RELOC_THUMB_PCREL_BRANCH23 @deffnx {} BFD_RELOC_THUMB_PCREL_BRANCH25 Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches. The lowest bit must be zero and is not stored in the instruction. Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an "nn" one smaller in all cases. Note further that BRANCH23 corresponds to R_ARM_THM_CALL. @end deffn @deffn {} BFD_RELOC_ARM_OFFSET_IMM 12-bit immediate offset, used in ARM-format ldr and str instructions. @end deffn @deffn {} BFD_RELOC_ARM_THUMB_OFFSET 5-bit immediate offset, used in Thumb-format ldr and str instructions. @end deffn @deffn {} BFD_RELOC_ARM_TARGET1 Pc-relative or absolute relocation depending on target. Used for entries in .init_array sections. @end deffn @deffn {} BFD_RELOC_ARM_ROSEGREL32 Read-only segment base relative address. @end deffn @deffn {} BFD_RELOC_ARM_SBREL32 Data segment base relative address. @end deffn @deffn {} BFD_RELOC_ARM_TARGET2 This reloc is used for references to RTTI data from exception handling tables. The actual definition depends on the target. It may be a pc-relative or some form of GOT-indirect relocation. @end deffn @deffn {} BFD_RELOC_ARM_PREL31 31-bit PC relative address. @end deffn @deffn {} BFD_RELOC_ARM_MOVW @deffnx {} BFD_RELOC_ARM_MOVT @deffnx {} BFD_RELOC_ARM_MOVW_PCREL @deffnx {} BFD_RELOC_ARM_MOVT_PCREL @deffnx {} BFD_RELOC_ARM_THUMB_MOVW @deffnx {} BFD_RELOC_ARM_THUMB_MOVT @deffnx {} BFD_RELOC_ARM_THUMB_MOVW_PCREL @deffnx {} BFD_RELOC_ARM_THUMB_MOVT_PCREL Low and High halfword relocations for MOVW and MOVT instructions. @end deffn @deffn {} BFD_RELOC_ARM_JUMP_SLOT @deffnx {} BFD_RELOC_ARM_GLOB_DAT @deffnx {} BFD_RELOC_ARM_GOT32 @deffnx {} BFD_RELOC_ARM_PLT32 @deffnx {} BFD_RELOC_ARM_RELATIVE @deffnx {} BFD_RELOC_ARM_GOTOFF @deffnx {} BFD_RELOC_ARM_GOTPC Relocations for setting up GOTs and PLTs for shared libraries. @end deffn @deffn {} BFD_RELOC_ARM_TLS_GD32 @deffnx {} BFD_RELOC_ARM_TLS_LDO32 @deffnx {} BFD_RELOC_ARM_TLS_LDM32 @deffnx {} BFD_RELOC_ARM_TLS_DTPOFF32 @deffnx {} BFD_RELOC_ARM_TLS_DTPMOD32 @deffnx {} BFD_RELOC_ARM_TLS_TPOFF32 @deffnx {} BFD_RELOC_ARM_TLS_IE32 @deffnx {} BFD_RELOC_ARM_TLS_LE32 ARM thread-local storage relocations. @end deffn @deffn {} BFD_RELOC_ARM_ALU_PC_G0_NC @deffnx {} BFD_RELOC_ARM_ALU_PC_G0 @deffnx {} BFD_RELOC_ARM_ALU_PC_G1_NC @deffnx {} BFD_RELOC_ARM_ALU_PC_G1 @deffnx {} BFD_RELOC_ARM_ALU_PC_G2 @deffnx {} BFD_RELOC_ARM_LDR_PC_G0 @deffnx {} BFD_RELOC_ARM_LDR_PC_G1 @deffnx {} BFD_RELOC_ARM_LDR_PC_G2 @deffnx {} BFD_RELOC_ARM_LDRS_PC_G0 @deffnx {} BFD_RELOC_ARM_LDRS_PC_G1 @deffnx {} BFD_RELOC_ARM_LDRS_PC_G2 @deffnx {} BFD_RELOC_ARM_LDC_PC_G0 @deffnx {} BFD_RELOC_ARM_LDC_PC_G1 @deffnx {} BFD_RELOC_ARM_LDC_PC_G2 @deffnx {} BFD_RELOC_ARM_ALU_SB_G0_NC @deffnx {} BFD_RELOC_ARM_ALU_SB_G0 @deffnx {} BFD_RELOC_ARM_ALU_SB_G1_NC @deffnx {} BFD_RELOC_ARM_ALU_SB_G1 @deffnx {} BFD_RELOC_ARM_ALU_SB_G2 @deffnx {} BFD_RELOC_ARM_LDR_SB_G0 @deffnx {} BFD_RELOC_ARM_LDR_SB_G1 @deffnx {} BFD_RELOC_ARM_LDR_SB_G2 @deffnx {} BFD_RELOC_ARM_LDRS_SB_G0 @deffnx {} BFD_RELOC_ARM_LDRS_SB_G1 @deffnx {} BFD_RELOC_ARM_LDRS_SB_G2 @deffnx {} BFD_RELOC_ARM_LDC_SB_G0 @deffnx {} BFD_RELOC_ARM_LDC_SB_G1 @deffnx {} BFD_RELOC_ARM_LDC_SB_G2 ARM group relocations. @end deffn @deffn {} BFD_RELOC_ARM_IMMEDIATE @deffnx {} BFD_RELOC_ARM_ADRL_IMMEDIATE @deffnx {} BFD_RELOC_ARM_T32_IMMEDIATE @deffnx {} BFD_RELOC_ARM_T32_ADD_IMM @deffnx {} BFD_RELOC_ARM_T32_IMM12 @deffnx {} BFD_RELOC_ARM_T32_ADD_PC12 @deffnx {} BFD_RELOC_ARM_SHIFT_IMM @deffnx {} BFD_RELOC_ARM_SMC @deffnx {} BFD_RELOC_ARM_SWI @deffnx {} BFD_RELOC_ARM_MULTI @deffnx {} BFD_RELOC_ARM_CP_OFF_IMM @deffnx {} BFD_RELOC_ARM_CP_OFF_IMM_S2 @deffnx {} BFD_RELOC_ARM_T32_CP_OFF_IMM @deffnx {} BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 @deffnx {} BFD_RELOC_ARM_ADR_IMM @deffnx {} BFD_RELOC_ARM_LDR_IMM @deffnx {} BFD_RELOC_ARM_LITERAL @deffnx {} BFD_RELOC_ARM_IN_POOL @deffnx {} BFD_RELOC_ARM_OFFSET_IMM8 @deffnx {} BFD_RELOC_ARM_T32_OFFSET_U8 @deffnx {} BFD_RELOC_ARM_T32_OFFSET_IMM @deffnx {} BFD_RELOC_ARM_HWLITERAL @deffnx {} BFD_RELOC_ARM_THUMB_ADD @deffnx {} BFD_RELOC_ARM_THUMB_IMM @deffnx {} BFD_RELOC_ARM_THUMB_SHIFT These relocs are only used within the ARM assembler. They are not (at present) written to any object files. @end deffn @deffn {} BFD_RELOC_SH_PCDISP8BY2 @deffnx {} BFD_RELOC_SH_PCDISP12BY2 @deffnx {} BFD_RELOC_SH_IMM3 @deffnx {} BFD_RELOC_SH_IMM3U @deffnx {} BFD_RELOC_SH_DISP12 @deffnx {} BFD_RELOC_SH_DISP12BY2 @deffnx {} BFD_RELOC_SH_DISP12BY4 @deffnx {} BFD_RELOC_SH_DISP12BY8 @deffnx {} BFD_RELOC_SH_DISP20 @deffnx {} BFD_RELOC_SH_DISP20BY8 @deffnx {} BFD_RELOC_SH_IMM4 @deffnx {} BFD_RELOC_SH_IMM4BY2 @deffnx {} BFD_RELOC_SH_IMM4BY4 @deffnx {} BFD_RELOC_SH_IMM8 @deffnx {} BFD_RELOC_SH_IMM8BY2 @deffnx {} BFD_RELOC_SH_IMM8BY4 @deffnx {} BFD_RELOC_SH_PCRELIMM8BY2 @deffnx {} BFD_RELOC_SH_PCRELIMM8BY4 @deffnx {} BFD_RELOC_SH_SWITCH16 @deffnx {} BFD_RELOC_SH_SWITCH32 @deffnx {} BFD_RELOC_SH_USES @deffnx {} BFD_RELOC_SH_COUNT @deffnx {} BFD_RELOC_SH_ALIGN @deffnx {} BFD_RELOC_SH_CODE @deffnx {} BFD_RELOC_SH_DATA @deffnx {} BFD_RELOC_SH_LABEL @deffnx {} BFD_RELOC_SH_LOOP_START @deffnx {} BFD_RELOC_SH_LOOP_END @deffnx {} BFD_RELOC_SH_COPY @deffnx {} BFD_RELOC_SH_GLOB_DAT @deffnx {} BFD_RELOC_SH_JMP_SLOT @deffnx {} BFD_RELOC_SH_RELATIVE @deffnx {} BFD_RELOC_SH_GOTPC @deffnx {} BFD_RELOC_SH_GOT_LOW16 @deffnx {} BFD_RELOC_SH_GOT_MEDLOW16 @deffnx {} BFD_RELOC_SH_GOT_MEDHI16 @deffnx {} BFD_RELOC_SH_GOT_HI16 @deffnx {} BFD_RELOC_SH_GOTPLT_LOW16 @deffnx {} BFD_RELOC_SH_GOTPLT_MEDLOW16 @deffnx {} BFD_RELOC_SH_GOTPLT_MEDHI16 @deffnx {} BFD_RELOC_SH_GOTPLT_HI16 @deffnx {} BFD_RELOC_SH_PLT_LOW16 @deffnx {} BFD_RELOC_SH_PLT_MEDLOW16 @deffnx {} BFD_RELOC_SH_PLT_MEDHI16 @deffnx {} BFD_RELOC_SH_PLT_HI16 @deffnx {} BFD_RELOC_SH_GOTOFF_LOW16 @deffnx {} BFD_RELOC_SH_GOTOFF_MEDLOW16 @deffnx {} BFD_RELOC_SH_GOTOFF_MEDHI16 @deffnx {} BFD_RELOC_SH_GOTOFF_HI16 @deffnx {} BFD_RELOC_SH_GOTPC_LOW16 @deffnx {} BFD_RELOC_SH_GOTPC_MEDLOW16 @deffnx {} BFD_RELOC_SH_GOTPC_MEDHI16 @deffnx {} BFD_RELOC_SH_GOTPC_HI16 @deffnx {} BFD_RELOC_SH_COPY64 @deffnx {} BFD_RELOC_SH_GLOB_DAT64 @deffnx {} BFD_RELOC_SH_JMP_SLOT64 @deffnx {} BFD_RELOC_SH_RELATIVE64 @deffnx {} BFD_RELOC_SH_GOT10BY4 @deffnx {} BFD_RELOC_SH_GOT10BY8 @deffnx {} BFD_RELOC_SH_GOTPLT10BY4 @deffnx {} BFD_RELOC_SH_GOTPLT10BY8 @deffnx {} BFD_RELOC_SH_GOTPLT32 @deffnx {} BFD_RELOC_SH_SHMEDIA_CODE @deffnx {} BFD_RELOC_SH_IMMU5 @deffnx {} BFD_RELOC_SH_IMMS6 @deffnx {} BFD_RELOC_SH_IMMS6BY32 @deffnx {} BFD_RELOC_SH_IMMU6 @deffnx {} BFD_RELOC_SH_IMMS10 @deffnx {} BFD_RELOC_SH_IMMS10BY2 @deffnx {} BFD_RELOC_SH_IMMS10BY4 @deffnx {} BFD_RELOC_SH_IMMS10BY8 @deffnx {} BFD_RELOC_SH_IMMS16 @deffnx {} BFD_RELOC_SH_IMMU16 @deffnx {} BFD_RELOC_SH_IMM_LOW16 @deffnx {} BFD_RELOC_SH_IMM_LOW16_PCREL @deffnx {} BFD_RELOC_SH_IMM_MEDLOW16 @deffnx {} BFD_RELOC_SH_IMM_MEDLOW16_PCREL @deffnx {} BFD_RELOC_SH_IMM_MEDHI16 @deffnx {} BFD_RELOC_SH_IMM_MEDHI16_PCREL @deffnx {} BFD_RELOC_SH_IMM_HI16 @deffnx {} BFD_RELOC_SH_IMM_HI16_PCREL @deffnx {} BFD_RELOC_SH_PT_16 @deffnx {} BFD_RELOC_SH_TLS_GD_32 @deffnx {} BFD_RELOC_SH_TLS_LD_32 @deffnx {} BFD_RELOC_SH_TLS_LDO_32 @deffnx {} BFD_RELOC_SH_TLS_IE_32 @deffnx {} BFD_RELOC_SH_TLS_LE_32 @deffnx {} BFD_RELOC_SH_TLS_DTPMOD32 @deffnx {} BFD_RELOC_SH_TLS_DTPOFF32 @deffnx {} BFD_RELOC_SH_TLS_TPOFF32 Renesas / SuperH SH relocs. Not all of these appear in object files. @end deffn @deffn {} BFD_RELOC_ARC_B22_PCREL ARC Cores relocs. ARC 22 bit pc-relative branch. The lowest two bits must be zero and are not stored in the instruction. The high 20 bits are installed in bits 26 through 7 of the instruction. @end deffn @deffn {} BFD_RELOC_ARC_B26 ARC 26 bit absolute branch. The lowest two bits must be zero and are not stored in the instruction. The high 24 bits are installed in bits 23 through 0. @end deffn @deffn {} BFD_RELOC_BFIN_16_IMM ADI Blackfin 16 bit immediate absolute reloc. @end deffn @deffn {} BFD_RELOC_BFIN_16_HIGH ADI Blackfin 16 bit immediate absolute reloc higher 16 bits. @end deffn @deffn {} BFD_RELOC_BFIN_4_PCREL ADI Blackfin 'a' part of LSETUP. @end deffn @deffn {} BFD_RELOC_BFIN_5_PCREL ADI Blackfin. @end deffn @deffn {} BFD_RELOC_BFIN_16_LOW ADI Blackfin 16 bit immediate absolute reloc lower 16 bits. @end deffn @deffn {} BFD_RELOC_BFIN_10_PCREL ADI Blackfin. @end deffn @deffn {} BFD_RELOC_BFIN_11_PCREL ADI Blackfin 'b' part of LSETUP. @end deffn @deffn {} BFD_RELOC_BFIN_12_PCREL_JUMP ADI Blackfin. @end deffn @deffn {} BFD_RELOC_BFIN_12_PCREL_JUMP_S ADI Blackfin Short jump, pcrel. @end deffn @deffn {} BFD_RELOC_BFIN_24_PCREL_CALL_X ADI Blackfin Call.x not implemented. @end deffn @deffn {} BFD_RELOC_BFIN_24_PCREL_JUMP_L ADI Blackfin Long Jump pcrel. @end deffn @deffn {} BFD_RELOC_BFIN_GOT17M4 @deffnx {} BFD_RELOC_BFIN_GOTHI @deffnx {} BFD_RELOC_BFIN_GOTLO @deffnx {} BFD_RELOC_BFIN_FUNCDESC @deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOT17M4 @deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOTHI @deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOTLO @deffnx {} BFD_RELOC_BFIN_FUNCDESC_VALUE @deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4 @deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI @deffnx {} BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO @deffnx {} BFD_RELOC_BFIN_GOTOFF17M4 @deffnx {} BFD_RELOC_BFIN_GOTOFFHI @deffnx {} BFD_RELOC_BFIN_GOTOFFLO ADI Blackfin FD-PIC relocations. @end deffn @deffn {} BFD_RELOC_BFIN_GOT ADI Blackfin GOT relocation. @end deffn @deffn {} BFD_RELOC_BFIN_PLTPC ADI Blackfin PLTPC relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_PUSH ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_CONST ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_ADD ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_SUB ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_MULT ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_DIV ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_MOD ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_LSHIFT ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_RSHIFT ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_AND ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_OR ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_XOR ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_LAND ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_LOR ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_LEN ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_NEG ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_COMP ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_PAGE ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_HWPAGE ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_ARELOC_BFIN_ADDR ADI Blackfin arithmetic relocation. @end deffn @deffn {} BFD_RELOC_D10V_10_PCREL_R Mitsubishi D10V relocs. This is a 10-bit reloc with the right 2 bits assumed to be 0. @end deffn @deffn {} BFD_RELOC_D10V_10_PCREL_L Mitsubishi D10V relocs. This is a 10-bit reloc with the right 2 bits assumed to be 0. This is the same as the previous reloc except it is in the left container, i.e., shifted left 15 bits. @end deffn @deffn {} BFD_RELOC_D10V_18 This is an 18-bit reloc with the right 2 bits assumed to be 0. @end deffn @deffn {} BFD_RELOC_D10V_18_PCREL This is an 18-bit reloc with the right 2 bits assumed to be 0. @end deffn @deffn {} BFD_RELOC_D30V_6 Mitsubishi D30V relocs. This is a 6-bit absolute reloc. @end deffn @deffn {} BFD_RELOC_D30V_9_PCREL This is a 6-bit pc-relative reloc with the right 3 bits assumed to be 0. @end deffn @deffn {} BFD_RELOC_D30V_9_PCREL_R This is a 6-bit pc-relative reloc with the right 3 bits assumed to be 0. Same as the previous reloc but on the right side of the container. @end deffn @deffn {} BFD_RELOC_D30V_15 This is a 12-bit absolute reloc with the right 3 bitsassumed to be 0. @end deffn @deffn {} BFD_RELOC_D30V_15_PCREL This is a 12-bit pc-relative reloc with the right 3 bits assumed to be 0. @end deffn @deffn {} BFD_RELOC_D30V_15_PCREL_R This is a 12-bit pc-relative reloc with the right 3 bits assumed to be 0. Same as the previous reloc but on the right side of the container. @end deffn @deffn {} BFD_RELOC_D30V_21 This is an 18-bit absolute reloc with the right 3 bits assumed to be 0. @end deffn @deffn {} BFD_RELOC_D30V_21_PCREL This is an 18-bit pc-relative reloc with the right 3 bits assumed to be 0. @end deffn @deffn {} BFD_RELOC_D30V_21_PCREL_R This is an 18-bit pc-relative reloc with the right 3 bits assumed to be 0. Same as the previous reloc but on the right side of the container. @end deffn @deffn {} BFD_RELOC_D30V_32 This is a 32-bit absolute reloc. @end deffn @deffn {} BFD_RELOC_D30V_32_PCREL This is a 32-bit pc-relative reloc. @end deffn @deffn {} BFD_RELOC_DLX_HI16_S DLX relocs @end deffn @deffn {} BFD_RELOC_DLX_LO16 DLX relocs @end deffn @deffn {} BFD_RELOC_DLX_JMP26 DLX relocs @end deffn @deffn {} BFD_RELOC_M32C_HI8 @deffnx {} BFD_RELOC_M32C_RL_JUMP @deffnx {} BFD_RELOC_M32C_RL_1ADDR @deffnx {} BFD_RELOC_M32C_RL_2ADDR Renesas M16C/M32C Relocations. @end deffn @deffn {} BFD_RELOC_M32R_24 Renesas M32R (formerly Mitsubishi M32R) relocs. This is a 24 bit absolute address. @end deffn @deffn {} BFD_RELOC_M32R_10_PCREL This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0. @end deffn @deffn {} BFD_RELOC_M32R_18_PCREL This is an 18-bit reloc with the right 2 bits assumed to be 0. @end deffn @deffn {} BFD_RELOC_M32R_26_PCREL This is a 26-bit reloc with the right 2 bits assumed to be 0. @end deffn @deffn {} BFD_RELOC_M32R_HI16_ULO This is a 16-bit reloc containing the high 16 bits of an address used when the lower 16 bits are treated as unsigned. @end deffn @deffn {} BFD_RELOC_M32R_HI16_SLO This is a 16-bit reloc containing the high 16 bits of an address used when the lower 16 bits are treated as signed. @end deffn @deffn {} BFD_RELOC_M32R_LO16 This is a 16-bit reloc containing the lower 16 bits of an address. @end deffn @deffn {} BFD_RELOC_M32R_SDA16 This is a 16-bit reloc containing the small data area offset for use in add3, load, and store instructions. @end deffn @deffn {} BFD_RELOC_M32R_GOT24 @deffnx {} BFD_RELOC_M32R_26_PLTREL @deffnx {} BFD_RELOC_M32R_COPY @deffnx {} BFD_RELOC_M32R_GLOB_DAT @deffnx {} BFD_RELOC_M32R_JMP_SLOT @deffnx {} BFD_RELOC_M32R_RELATIVE @deffnx {} BFD_RELOC_M32R_GOTOFF @deffnx {} BFD_RELOC_M32R_GOTOFF_HI_ULO @deffnx {} BFD_RELOC_M32R_GOTOFF_HI_SLO @deffnx {} BFD_RELOC_M32R_GOTOFF_LO @deffnx {} BFD_RELOC_M32R_GOTPC24 @deffnx {} BFD_RELOC_M32R_GOT16_HI_ULO @deffnx {} BFD_RELOC_M32R_GOT16_HI_SLO @deffnx {} BFD_RELOC_M32R_GOT16_LO @deffnx {} BFD_RELOC_M32R_GOTPC_HI_ULO @deffnx {} BFD_RELOC_M32R_GOTPC_HI_SLO @deffnx {} BFD_RELOC_M32R_GOTPC_LO For PIC. @end deffn @deffn {} BFD_RELOC_V850_9_PCREL This is a 9-bit reloc @end deffn @deffn {} BFD_RELOC_V850_22_PCREL This is a 22-bit reloc @end deffn @deffn {} BFD_RELOC_V850_SDA_16_16_OFFSET This is a 16 bit offset from the short data area pointer. @end deffn @deffn {} BFD_RELOC_V850_SDA_15_16_OFFSET This is a 16 bit offset (of which only 15 bits are used) from the short data area pointer. @end deffn @deffn {} BFD_RELOC_V850_ZDA_16_16_OFFSET This is a 16 bit offset from the zero data area pointer. @end deffn @deffn {} BFD_RELOC_V850_ZDA_15_16_OFFSET This is a 16 bit offset (of which only 15 bits are used) from the zero data area pointer. @end deffn @deffn {} BFD_RELOC_V850_TDA_6_8_OFFSET This is an 8 bit offset (of which only 6 bits are used) from the tiny data area pointer. @end deffn @deffn {} BFD_RELOC_V850_TDA_7_8_OFFSET This is an 8bit offset (of which only 7 bits are used) from the tiny data area pointer. @end deffn @deffn {} BFD_RELOC_V850_TDA_7_7_OFFSET This is a 7 bit offset from the tiny data area pointer. @end deffn @deffn {} BFD_RELOC_V850_TDA_16_16_OFFSET This is a 16 bit offset from the tiny data area pointer. @end deffn @deffn {} BFD_RELOC_V850_TDA_4_5_OFFSET This is a 5 bit offset (of which only 4 bits are used) from the tiny data area pointer. @end deffn @deffn {} BFD_RELOC_V850_TDA_4_4_OFFSET This is a 4 bit offset from the tiny data area pointer. @end deffn @deffn {} BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET This is a 16 bit offset from the short data area pointer, with the bits placed non-contiguously in the instruction. @end deffn @deffn {} BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET This is a 16 bit offset from the zero data area pointer, with the bits placed non-contiguously in the instruction. @end deffn @deffn {} BFD_RELOC_V850_CALLT_6_7_OFFSET This is a 6 bit offset from the call table base pointer. @end deffn @deffn {} BFD_RELOC_V850_CALLT_16_16_OFFSET This is a 16 bit offset from the call table base pointer. @end deffn @deffn {} BFD_RELOC_V850_LONGCALL Used for relaxing indirect function calls. @end deffn @deffn {} BFD_RELOC_V850_LONGJUMP Used for relaxing indirect jumps. @end deffn @deffn {} BFD_RELOC_V850_ALIGN Used to maintain alignment whilst relaxing. @end deffn @deffn {} BFD_RELOC_V850_LO16_SPLIT_OFFSET This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu instructions. @end deffn @deffn {} BFD_RELOC_MN10300_32_PCREL This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the instruction. @end deffn @deffn {} BFD_RELOC_MN10300_16_PCREL This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the instruction. @end deffn @deffn {} BFD_RELOC_TIC30_LDP This is a 8bit DP reloc for the tms320c30, where the most significant 8 bits of a 24 bit word are placed into the least significant 8 bits of the opcode. @end deffn @deffn {} BFD_RELOC_TIC54X_PARTLS7 This is a 7bit reloc for the tms320c54x, where the least significant 7 bits of a 16 bit word are placed into the least significant 7 bits of the opcode. @end deffn @deffn {} BFD_RELOC_TIC54X_PARTMS9 This is a 9bit DP reloc for the tms320c54x, where the most significant 9 bits of a 16 bit word are placed into the least significant 9 bits of the opcode. @end deffn @deffn {} BFD_RELOC_TIC54X_23 This is an extended address 23-bit reloc for the tms320c54x. @end deffn @deffn {} BFD_RELOC_TIC54X_16_OF_23 This is a 16-bit reloc for the tms320c54x, where the least significant 16 bits of a 23-bit extended address are placed into the opcode. @end deffn @deffn {} BFD_RELOC_TIC54X_MS7_OF_23 This is a reloc for the tms320c54x, where the most significant 7 bits of a 23-bit extended address are placed into the opcode. @end deffn @deffn {} BFD_RELOC_FR30_48 This is a 48 bit reloc for the FR30 that stores 32 bits. @end deffn @deffn {} BFD_RELOC_FR30_20 This is a 32 bit reloc for the FR30 that stores 20 bits split up into two sections. @end deffn @deffn {} BFD_RELOC_FR30_6_IN_4 This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in 4 bits. @end deffn @deffn {} BFD_RELOC_FR30_8_IN_8 This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset into 8 bits. @end deffn @deffn {} BFD_RELOC_FR30_9_IN_8 This is a 16 bit reloc for the FR30 that stores a 9 bit short offset into 8 bits. @end deffn @deffn {} BFD_RELOC_FR30_10_IN_8 This is a 16 bit reloc for the FR30 that stores a 10 bit word offset into 8 bits. @end deffn @deffn {} BFD_RELOC_FR30_9_PCREL This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative short offset into 8 bits. @end deffn @deffn {} BFD_RELOC_FR30_12_PCREL This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative short offset into 11 bits. @end deffn @deffn {} BFD_RELOC_MCORE_PCREL_IMM8BY4 @deffnx {} BFD_RELOC_MCORE_PCREL_IMM11BY2 @deffnx {} BFD_RELOC_MCORE_PCREL_IMM4BY2 @deffnx {} BFD_RELOC_MCORE_PCREL_32 @deffnx {} BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2 @deffnx {} BFD_RELOC_MCORE_RVA Motorola Mcore relocations. @end deffn @deffn {} BFD_RELOC_MEP_8 @deffnx {} BFD_RELOC_MEP_16 @deffnx {} BFD_RELOC_MEP_32 @deffnx {} BFD_RELOC_MEP_PCREL8A2 @deffnx {} BFD_RELOC_MEP_PCREL12A2 @deffnx {} BFD_RELOC_MEP_PCREL17A2 @deffnx {} BFD_RELOC_MEP_PCREL24A2 @deffnx {} BFD_RELOC_MEP_PCABS24A2 @deffnx {} BFD_RELOC_MEP_LOW16 @deffnx {} BFD_RELOC_MEP_HI16U @deffnx {} BFD_RELOC_MEP_HI16S @deffnx {} BFD_RELOC_MEP_GPREL @deffnx {} BFD_RELOC_MEP_TPREL @deffnx {} BFD_RELOC_MEP_TPREL7 @deffnx {} BFD_RELOC_MEP_TPREL7A2 @deffnx {} BFD_RELOC_MEP_TPREL7A4 @deffnx {} BFD_RELOC_MEP_UIMM24 @deffnx {} BFD_RELOC_MEP_ADDR24A4 @deffnx {} BFD_RELOC_MEP_GNU_VTINHERIT @deffnx {} BFD_RELOC_MEP_GNU_VTENTRY Toshiba Media Processor Relocations. @end deffn @deffn {} BFD_RELOC_MMIX_GETA @deffnx {} BFD_RELOC_MMIX_GETA_1 @deffnx {} BFD_RELOC_MMIX_GETA_2 @deffnx {} BFD_RELOC_MMIX_GETA_3 These are relocations for the GETA instruction. @end deffn @deffn {} BFD_RELOC_MMIX_CBRANCH @deffnx {} BFD_RELOC_MMIX_CBRANCH_J @deffnx {} BFD_RELOC_MMIX_CBRANCH_1 @deffnx {} BFD_RELOC_MMIX_CBRANCH_2 @deffnx {} BFD_RELOC_MMIX_CBRANCH_3 These are relocations for a conditional branch instruction. @end deffn @deffn {} BFD_RELOC_MMIX_PUSHJ @deffnx {} BFD_RELOC_MMIX_PUSHJ_1 @deffnx {} BFD_RELOC_MMIX_PUSHJ_2 @deffnx {} BFD_RELOC_MMIX_PUSHJ_3 @deffnx {} BFD_RELOC_MMIX_PUSHJ_STUBBABLE These are relocations for the PUSHJ instruction. @end deffn @deffn {} BFD_RELOC_MMIX_JMP @deffnx {} BFD_RELOC_MMIX_JMP_1 @deffnx {} BFD_RELOC_MMIX_JMP_2 @deffnx {} BFD_RELOC_MMIX_JMP_3 These are relocations for the JMP instruction. @end deffn @deffn {} BFD_RELOC_MMIX_ADDR19 This is a relocation for a relative address as in a GETA instruction or a branch. @end deffn @deffn {} BFD_RELOC_MMIX_ADDR27 This is a relocation for a relative address as in a JMP instruction. @end deffn @deffn {} BFD_RELOC_MMIX_REG_OR_BYTE This is a relocation for an instruction field that may be a general register or a value 0..255. @end deffn @deffn {} BFD_RELOC_MMIX_REG This is a relocation for an instruction field that may be a general register. @end deffn @deffn {} BFD_RELOC_MMIX_BASE_PLUS_OFFSET This is a relocation for two instruction fields holding a register and an offset, the equivalent of the relocation. @end deffn @deffn {} BFD_RELOC_MMIX_LOCAL This relocation is an assertion that the expression is not allocated as a global register. It does not modify contents. @end deffn @deffn {} BFD_RELOC_AVR_7_PCREL This is a 16 bit reloc for the AVR that stores 8 bit pc relative short offset into 7 bits. @end deffn @deffn {} BFD_RELOC_AVR_13_PCREL This is a 16 bit reloc for the AVR that stores 13 bit pc relative short offset into 12 bits. @end deffn @deffn {} BFD_RELOC_AVR_16_PM This is a 16 bit reloc for the AVR that stores 17 bit value (usually program memory address) into 16 bits. @end deffn @deffn {} BFD_RELOC_AVR_LO8_LDI This is a 16 bit reloc for the AVR that stores 8 bit value (usually data memory address) into 8 bit immediate value of LDI insn. @end deffn @deffn {} BFD_RELOC_AVR_HI8_LDI This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit of data memory address) into 8 bit immediate value of LDI insn. @end deffn @deffn {} BFD_RELOC_AVR_HH8_LDI This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit of program memory address) into 8 bit immediate value of LDI insn. @end deffn @deffn {} BFD_RELOC_AVR_MS8_LDI This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit of 32 bit value) into 8 bit immediate value of LDI insn. @end deffn @deffn {} BFD_RELOC_AVR_LO8_LDI_NEG This is a 16 bit reloc for the AVR that stores negated 8 bit value (usually data memory address) into 8 bit immediate value of SUBI insn. @end deffn @deffn {} BFD_RELOC_AVR_HI8_LDI_NEG This is a 16 bit reloc for the AVR that stores negated 8 bit value (high 8 bit of data memory address) into 8 bit immediate value of SUBI insn. @end deffn @deffn {} BFD_RELOC_AVR_HH8_LDI_NEG This is a 16 bit reloc for the AVR that stores negated 8 bit value (most high 8 bit of program memory address) into 8 bit immediate value of LDI or SUBI insn. @end deffn @deffn {} BFD_RELOC_AVR_MS8_LDI_NEG This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb of 32 bit value) into 8 bit immediate value of LDI insn. @end deffn @deffn {} BFD_RELOC_AVR_LO8_LDI_PM This is a 16 bit reloc for the AVR that stores 8 bit value (usually command address) into 8 bit immediate value of LDI insn. @end deffn @deffn {} BFD_RELOC_AVR_LO8_LDI_GS This is a 16 bit reloc for the AVR that stores 8 bit value (command address) into 8 bit immediate value of LDI insn. If the address is beyond the 128k boundary, the linker inserts a jump stub for this reloc in the lower 128k. @end deffn @deffn {} BFD_RELOC_AVR_HI8_LDI_PM This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit of command address) into 8 bit immediate value of LDI insn. @end deffn @deffn {} BFD_RELOC_AVR_HI8_LDI_GS This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit of command address) into 8 bit immediate value of LDI insn. If the address is beyond the 128k boundary, the linker inserts a jump stub for this reloc below 128k. @end deffn @deffn {} BFD_RELOC_AVR_HH8_LDI_PM This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit of command address) into 8 bit immediate value of LDI insn. @end deffn @deffn {} BFD_RELOC_AVR_LO8_LDI_PM_NEG This is a 16 bit reloc for the AVR that stores negated 8 bit value (usually command address) into 8 bit immediate value of SUBI insn. @end deffn @deffn {} BFD_RELOC_AVR_HI8_LDI_PM_NEG This is a 16 bit reloc for the AVR that stores negated 8 bit value (high 8 bit of 16 bit command address) into 8 bit immediate value of SUBI insn. @end deffn @deffn {} BFD_RELOC_AVR_HH8_LDI_PM_NEG This is a 16 bit reloc for the AVR that stores negated 8 bit value (high 6 bit of 22 bit command address) into 8 bit immediate value of SUBI insn. @end deffn @deffn {} BFD_RELOC_AVR_CALL This is a 32 bit reloc for the AVR that stores 23 bit value into 22 bits. @end deffn @deffn {} BFD_RELOC_AVR_LDI This is a 16 bit reloc for the AVR that stores all needed bits for absolute addressing with ldi with overflow check to linktime @end deffn @deffn {} BFD_RELOC_AVR_6 This is a 6 bit reloc for the AVR that stores offset for ldd/std instructions @end deffn @deffn {} BFD_RELOC_AVR_6_ADIW This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw instructions @end deffn @deffn {} BFD_RELOC_390_12 Direct 12 bit. @end deffn @deffn {} BFD_RELOC_390_GOT12 12 bit GOT offset. @end deffn @deffn {} BFD_RELOC_390_PLT32 32 bit PC relative PLT address. @end deffn @deffn {} BFD_RELOC_390_COPY Copy symbol at runtime. @end deffn @deffn {} BFD_RELOC_390_GLOB_DAT Create GOT entry. @end deffn @deffn {} BFD_RELOC_390_JMP_SLOT Create PLT entry. @end deffn @deffn {} BFD_RELOC_390_RELATIVE Adjust by program base. @end deffn @deffn {} BFD_RELOC_390_GOTPC 32 bit PC relative offset to GOT. @end deffn @deffn {} BFD_RELOC_390_GOT16 16 bit GOT offset. @end deffn @deffn {} BFD_RELOC_390_PC16DBL PC relative 16 bit shifted by 1. @end deffn @deffn {} BFD_RELOC_390_PLT16DBL 16 bit PC rel. PLT shifted by 1. @end deffn @deffn {} BFD_RELOC_390_PC32DBL PC relative 32 bit shifted by 1. @end deffn @deffn {} BFD_RELOC_390_PLT32DBL 32 bit PC rel. PLT shifted by 1. @end deffn @deffn {} BFD_RELOC_390_GOTPCDBL 32 bit PC rel. GOT shifted by 1. @end deffn @deffn {} BFD_RELOC_390_GOT64 64 bit GOT offset. @end deffn @deffn {} BFD_RELOC_390_PLT64 64 bit PC relative PLT address. @end deffn @deffn {} BFD_RELOC_390_GOTENT 32 bit rel. offset to GOT entry. @end deffn @deffn {} BFD_RELOC_390_GOTOFF64 64 bit offset to GOT. @end deffn @deffn {} BFD_RELOC_390_GOTPLT12 12-bit offset to symbol-entry within GOT, with PLT handling. @end deffn @deffn {} BFD_RELOC_390_GOTPLT16 16-bit offset to symbol-entry within GOT, with PLT handling. @end deffn @deffn {} BFD_RELOC_390_GOTPLT32 32-bit offset to symbol-entry within GOT, with PLT handling. @end deffn @deffn {} BFD_RELOC_390_GOTPLT64 64-bit offset to symbol-entry within GOT, with PLT handling. @end deffn @deffn {} BFD_RELOC_390_GOTPLTENT 32-bit rel. offset to symbol-entry within GOT, with PLT handling. @end deffn @deffn {} BFD_RELOC_390_PLTOFF16 16-bit rel. offset from the GOT to a PLT entry. @end deffn @deffn {} BFD_RELOC_390_PLTOFF32 32-bit rel. offset from the GOT to a PLT entry. @end deffn @deffn {} BFD_RELOC_390_PLTOFF64 64-bit rel. offset from the GOT to a PLT entry. @end deffn @deffn {} BFD_RELOC_390_TLS_LOAD @deffnx {} BFD_RELOC_390_TLS_GDCALL @deffnx {} BFD_RELOC_390_TLS_LDCALL @deffnx {} BFD_RELOC_390_TLS_GD32 @deffnx {} BFD_RELOC_390_TLS_GD64 @deffnx {} BFD_RELOC_390_TLS_GOTIE12 @deffnx {} BFD_RELOC_390_TLS_GOTIE32 @deffnx {} BFD_RELOC_390_TLS_GOTIE64 @deffnx {} BFD_RELOC_390_TLS_LDM32 @deffnx {} BFD_RELOC_390_TLS_LDM64 @deffnx {} BFD_RELOC_390_TLS_IE32 @deffnx {} BFD_RELOC_390_TLS_IE64 @deffnx {} BFD_RELOC_390_TLS_IEENT @deffnx {} BFD_RELOC_390_TLS_LE32 @deffnx {} BFD_RELOC_390_TLS_LE64 @deffnx {} BFD_RELOC_390_TLS_LDO32 @deffnx {} BFD_RELOC_390_TLS_LDO64 @deffnx {} BFD_RELOC_390_TLS_DTPMOD @deffnx {} BFD_RELOC_390_TLS_DTPOFF @deffnx {} BFD_RELOC_390_TLS_TPOFF s390 tls relocations. @end deffn @deffn {} BFD_RELOC_390_20 @deffnx {} BFD_RELOC_390_GOT20 @deffnx {} BFD_RELOC_390_GOTPLT20 @deffnx {} BFD_RELOC_390_TLS_GOTIE20 Long displacement extension. @end deffn @deffn {} BFD_RELOC_SCORE_DUMMY1 Score relocations @end deffn @deffn {} BFD_RELOC_SCORE_GPREL15 Low 16 bit for load/store @end deffn @deffn {} BFD_RELOC_SCORE_DUMMY2 @deffnx {} BFD_RELOC_SCORE_JMP This is a 24-bit reloc with the right 1 bit assumed to be 0 @end deffn @deffn {} BFD_RELOC_SCORE_BRANCH This is a 19-bit reloc with the right 1 bit assumed to be 0 @end deffn @deffn {} BFD_RELOC_SCORE16_JMP This is a 11-bit reloc with the right 1 bit assumed to be 0 @end deffn @deffn {} BFD_RELOC_SCORE16_BRANCH This is a 8-bit reloc with the right 1 bit assumed to be 0 @end deffn @deffn {} BFD_RELOC_SCORE_GOT15 @deffnx {} BFD_RELOC_SCORE_GOT_LO16 @deffnx {} BFD_RELOC_SCORE_CALL15 @deffnx {} BFD_RELOC_SCORE_DUMMY_HI16 Undocumented Score relocs @end deffn @deffn {} BFD_RELOC_IP2K_FR9 Scenix IP2K - 9-bit register number / data address @end deffn @deffn {} BFD_RELOC_IP2K_BANK Scenix IP2K - 4-bit register/data bank number @end deffn @deffn {} BFD_RELOC_IP2K_ADDR16CJP Scenix IP2K - low 13 bits of instruction word address @end deffn @deffn {} BFD_RELOC_IP2K_PAGE3 Scenix IP2K - high 3 bits of instruction word address @end deffn @deffn {} BFD_RELOC_IP2K_LO8DATA @deffnx {} BFD_RELOC_IP2K_HI8DATA @deffnx {} BFD_RELOC_IP2K_EX8DATA Scenix IP2K - ext/low/high 8 bits of data address @end deffn @deffn {} BFD_RELOC_IP2K_LO8INSN @deffnx {} BFD_RELOC_IP2K_HI8INSN Scenix IP2K - low/high 8 bits of instruction word address @end deffn @deffn {} BFD_RELOC_IP2K_PC_SKIP Scenix IP2K - even/odd PC modifier to modify snb pcl.0 @end deffn @deffn {} BFD_RELOC_IP2K_TEXT Scenix IP2K - 16 bit word address in text section. @end deffn @deffn {} BFD_RELOC_IP2K_FR_OFFSET Scenix IP2K - 7-bit sp or dp offset @end deffn @deffn {} BFD_RELOC_VPE4KMATH_DATA @deffnx {} BFD_RELOC_VPE4KMATH_INSN Scenix VPE4K coprocessor - data/insn-space addressing @end deffn @deffn {} BFD_RELOC_VTABLE_INHERIT @deffnx {} BFD_RELOC_VTABLE_ENTRY These two relocations are used by the linker to determine which of the entries in a C++ virtual function table are actually used. When the --gc-sections option is given, the linker will zero out the entries that are not used, so that the code for those functions need not be included in the output. VTABLE_INHERIT is a zero-space relocation used to describe to the linker the inheritance tree of a C++ virtual function table. The relocation's symbol should be the parent class' vtable, and the relocation should be located at the child vtable. VTABLE_ENTRY is a zero-space relocation that describes the use of a virtual function table entry. The reloc's symbol should refer to the table of the class mentioned in the code. Off of that base, an offset describes the entry that is being used. For Rela hosts, this offset is stored in the reloc's addend. For Rel hosts, we are forced to put this offset in the reloc's section offset. @end deffn @deffn {} BFD_RELOC_IA64_IMM14 @deffnx {} BFD_RELOC_IA64_IMM22 @deffnx {} BFD_RELOC_IA64_IMM64 @deffnx {} BFD_RELOC_IA64_DIR32MSB @deffnx {} BFD_RELOC_IA64_DIR32LSB @deffnx {} BFD_RELOC_IA64_DIR64MSB @deffnx {} BFD_RELOC_IA64_DIR64LSB @deffnx {} BFD_RELOC_IA64_GPREL22 @deffnx {} BFD_RELOC_IA64_GPREL64I @deffnx {} BFD_RELOC_IA64_GPREL32MSB @deffnx {} BFD_RELOC_IA64_GPREL32LSB @deffnx {} BFD_RELOC_IA64_GPREL64MSB @deffnx {} BFD_RELOC_IA64_GPREL64LSB @deffnx {} BFD_RELOC_IA64_LTOFF22 @deffnx {} BFD_RELOC_IA64_LTOFF64I @deffnx {} BFD_RELOC_IA64_PLTOFF22 @deffnx {} BFD_RELOC_IA64_PLTOFF64I @deffnx {} BFD_RELOC_IA64_PLTOFF64MSB @deffnx {} BFD_RELOC_IA64_PLTOFF64LSB @deffnx {} BFD_RELOC_IA64_FPTR64I @deffnx {} BFD_RELOC_IA64_FPTR32MSB @deffnx {} BFD_RELOC_IA64_FPTR32LSB @deffnx {} BFD_RELOC_IA64_FPTR64MSB @deffnx {} BFD_RELOC_IA64_FPTR64LSB @deffnx {} BFD_RELOC_IA64_PCREL21B @deffnx {} BFD_RELOC_IA64_PCREL21BI @deffnx {} BFD_RELOC_IA64_PCREL21M @deffnx {} BFD_RELOC_IA64_PCREL21F @deffnx {} BFD_RELOC_IA64_PCREL22 @deffnx {} BFD_RELOC_IA64_PCREL60B @deffnx {} BFD_RELOC_IA64_PCREL64I @deffnx {} BFD_RELOC_IA64_PCREL32MSB @deffnx {} BFD_RELOC_IA64_PCREL32LSB @deffnx {} BFD_RELOC_IA64_PCREL64MSB @deffnx {} BFD_RELOC_IA64_PCREL64LSB @deffnx {} BFD_RELOC_IA64_LTOFF_FPTR22 @deffnx {} BFD_RELOC_IA64_LTOFF_FPTR64I @deffnx {} BFD_RELOC_IA64_LTOFF_FPTR32MSB @deffnx {} BFD_RELOC_IA64_LTOFF_FPTR32LSB @deffnx {} BFD_RELOC_IA64_LTOFF_FPTR64MSB @deffnx {} BFD_RELOC_IA64_LTOFF_FPTR64LSB @deffnx {} BFD_RELOC_IA64_SEGREL32MSB @deffnx {} BFD_RELOC_IA64_SEGREL32LSB @deffnx {} BFD_RELOC_IA64_SEGREL64MSB @deffnx {} BFD_RELOC_IA64_SEGREL64LSB @deffnx {} BFD_RELOC_IA64_SECREL32MSB @deffnx {} BFD_RELOC_IA64_SECREL32LSB @deffnx {} BFD_RELOC_IA64_SECREL64MSB @deffnx {} BFD_RELOC_IA64_SECREL64LSB @deffnx {} BFD_RELOC_IA64_REL32MSB @deffnx {} BFD_RELOC_IA64_REL32LSB @deffnx {} BFD_RELOC_IA64_REL64MSB @deffnx {} BFD_RELOC_IA64_REL64LSB @deffnx {} BFD_RELOC_IA64_LTV32MSB @deffnx {} BFD_RELOC_IA64_LTV32LSB @deffnx {} BFD_RELOC_IA64_LTV64MSB @deffnx {} BFD_RELOC_IA64_LTV64LSB @deffnx {} BFD_RELOC_IA64_IPLTMSB @deffnx {} BFD_RELOC_IA64_IPLTLSB @deffnx {} BFD_RELOC_IA64_COPY @deffnx {} BFD_RELOC_IA64_LTOFF22X @deffnx {} BFD_RELOC_IA64_LDXMOV @deffnx {} BFD_RELOC_IA64_TPREL14 @deffnx {} BFD_RELOC_IA64_TPREL22 @deffnx {} BFD_RELOC_IA64_TPREL64I @deffnx {} BFD_RELOC_IA64_TPREL64MSB @deffnx {} BFD_RELOC_IA64_TPREL64LSB @deffnx {} BFD_RELOC_IA64_LTOFF_TPREL22 @deffnx {} BFD_RELOC_IA64_DTPMOD64MSB @deffnx {} BFD_RELOC_IA64_DTPMOD64LSB @deffnx {} BFD_RELOC_IA64_LTOFF_DTPMOD22 @deffnx {} BFD_RELOC_IA64_DTPREL14 @deffnx {} BFD_RELOC_IA64_DTPREL22 @deffnx {} BFD_RELOC_IA64_DTPREL64I @deffnx {} BFD_RELOC_IA64_DTPREL32MSB @deffnx {} BFD_RELOC_IA64_DTPREL32LSB @deffnx {} BFD_RELOC_IA64_DTPREL64MSB @deffnx {} BFD_RELOC_IA64_DTPREL64LSB @deffnx {} BFD_RELOC_IA64_LTOFF_DTPREL22 Intel IA64 Relocations. @end deffn @deffn {} BFD_RELOC_M68HC11_HI8 Motorola 68HC11 reloc. This is the 8 bit high part of an absolute address. @end deffn @deffn {} BFD_RELOC_M68HC11_LO8 Motorola 68HC11 reloc. This is the 8 bit low part of an absolute address. @end deffn @deffn {} BFD_RELOC_M68HC11_3B Motorola 68HC11 reloc. This is the 3 bit of a value. @end deffn @deffn {} BFD_RELOC_M68HC11_RL_JUMP Motorola 68HC11 reloc. This reloc marks the beginning of a jump/call instruction. It is used for linker relaxation to correctly identify beginning of instruction and change some branches to use PC-relative addressing mode. @end deffn @deffn {} BFD_RELOC_M68HC11_RL_GROUP Motorola 68HC11 reloc. This reloc marks a group of several instructions that gcc generates and for which the linker relaxation pass can modify and/or remove some of them. @end deffn @deffn {} BFD_RELOC_M68HC11_LO16 Motorola 68HC11 reloc. This is the 16-bit lower part of an address. It is used for 'call' instruction to specify the symbol address without any special transformation (due to memory bank window). @end deffn @deffn {} BFD_RELOC_M68HC11_PAGE Motorola 68HC11 reloc. This is a 8-bit reloc that specifies the page number of an address. It is used by 'call' instruction to specify the page number of the symbol. @end deffn @deffn {} BFD_RELOC_M68HC11_24 Motorola 68HC11 reloc. This is a 24-bit reloc that represents the address with a 16-bit value and a 8-bit page number. The symbol address is transformed to follow the 16K memory bank of 68HC12 (seen as mapped in the window). @end deffn @deffn {} BFD_RELOC_M68HC12_5B Motorola 68HC12 reloc. This is the 5 bits of a value. @end deffn @deffn {} BFD_RELOC_16C_NUM08 @deffnx {} BFD_RELOC_16C_NUM08_C @deffnx {} BFD_RELOC_16C_NUM16 @deffnx {} BFD_RELOC_16C_NUM16_C @deffnx {} BFD_RELOC_16C_NUM32 @deffnx {} BFD_RELOC_16C_NUM32_C @deffnx {} BFD_RELOC_16C_DISP04 @deffnx {} BFD_RELOC_16C_DISP04_C @deffnx {} BFD_RELOC_16C_DISP08 @deffnx {} BFD_RELOC_16C_DISP08_C @deffnx {} BFD_RELOC_16C_DISP16 @deffnx {} BFD_RELOC_16C_DISP16_C @deffnx {} BFD_RELOC_16C_DISP24 @deffnx {} BFD_RELOC_16C_DISP24_C @deffnx {} BFD_RELOC_16C_DISP24a @deffnx {} BFD_RELOC_16C_DISP24a_C @deffnx {} BFD_RELOC_16C_REG04 @deffnx {} BFD_RELOC_16C_REG04_C @deffnx {} BFD_RELOC_16C_REG04a @deffnx {} BFD_RELOC_16C_REG04a_C @deffnx {} BFD_RELOC_16C_REG14 @deffnx {} BFD_RELOC_16C_REG14_C @deffnx {} BFD_RELOC_16C_REG16 @deffnx {} BFD_RELOC_16C_REG16_C @deffnx {} BFD_RELOC_16C_REG20 @deffnx {} BFD_RELOC_16C_REG20_C @deffnx {} BFD_RELOC_16C_ABS20 @deffnx {} BFD_RELOC_16C_ABS20_C @deffnx {} BFD_RELOC_16C_ABS24 @deffnx {} BFD_RELOC_16C_ABS24_C @deffnx {} BFD_RELOC_16C_IMM04 @deffnx {} BFD_RELOC_16C_IMM04_C @deffnx {} BFD_RELOC_16C_IMM16 @deffnx {} BFD_RELOC_16C_IMM16_C @deffnx {} BFD_RELOC_16C_IMM20 @deffnx {} BFD_RELOC_16C_IMM20_C @deffnx {} BFD_RELOC_16C_IMM24 @deffnx {} BFD_RELOC_16C_IMM24_C @deffnx {} BFD_RELOC_16C_IMM32 @deffnx {} BFD_RELOC_16C_IMM32_C NS CR16C Relocations. @end deffn @deffn {} BFD_RELOC_CRX_REL4 @deffnx {} BFD_RELOC_CRX_REL8 @deffnx {} BFD_RELOC_CRX_REL8_CMP @deffnx {} BFD_RELOC_CRX_REL16 @deffnx {} BFD_RELOC_CRX_REL24 @deffnx {} BFD_RELOC_CRX_REL32 @deffnx {} BFD_RELOC_CRX_REGREL12 @deffnx {} BFD_RELOC_CRX_REGREL22 @deffnx {} BFD_RELOC_CRX_REGREL28 @deffnx {} BFD_RELOC_CRX_REGREL32 @deffnx {} BFD_RELOC_CRX_ABS16 @deffnx {} BFD_RELOC_CRX_ABS32 @deffnx {} BFD_RELOC_CRX_NUM8 @deffnx {} BFD_RELOC_CRX_NUM16 @deffnx {} BFD_RELOC_CRX_NUM32 @deffnx {} BFD_RELOC_CRX_IMM16 @deffnx {} BFD_RELOC_CRX_IMM32 @deffnx {} BFD_RELOC_CRX_SWITCH8 @deffnx {} BFD_RELOC_CRX_SWITCH16 @deffnx {} BFD_RELOC_CRX_SWITCH32 NS CRX Relocations. @end deffn @deffn {} BFD_RELOC_CRIS_BDISP8 @deffnx {} BFD_RELOC_CRIS_UNSIGNED_5 @deffnx {} BFD_RELOC_CRIS_SIGNED_6 @deffnx {} BFD_RELOC_CRIS_UNSIGNED_6 @deffnx {} BFD_RELOC_CRIS_SIGNED_8 @deffnx {} BFD_RELOC_CRIS_UNSIGNED_8 @deffnx {} BFD_RELOC_CRIS_SIGNED_16 @deffnx {} BFD_RELOC_CRIS_UNSIGNED_16 @deffnx {} BFD_RELOC_CRIS_LAPCQ_OFFSET @deffnx {} BFD_RELOC_CRIS_UNSIGNED_4 These relocs are only used within the CRIS assembler. They are not (at present) written to any object files. @end deffn @deffn {} BFD_RELOC_CRIS_COPY @deffnx {} BFD_RELOC_CRIS_GLOB_DAT @deffnx {} BFD_RELOC_CRIS_JUMP_SLOT @deffnx {} BFD_RELOC_CRIS_RELATIVE Relocs used in ELF shared libraries for CRIS. @end deffn @deffn {} BFD_RELOC_CRIS_32_GOT 32-bit offset to symbol-entry within GOT. @end deffn @deffn {} BFD_RELOC_CRIS_16_GOT 16-bit offset to symbol-entry within GOT. @end deffn @deffn {} BFD_RELOC_CRIS_32_GOTPLT 32-bit offset to symbol-entry within GOT, with PLT handling. @end deffn @deffn {} BFD_RELOC_CRIS_16_GOTPLT 16-bit offset to symbol-entry within GOT, with PLT handling. @end deffn @deffn {} BFD_RELOC_CRIS_32_GOTREL 32-bit offset to symbol, relative to GOT. @end deffn @deffn {} BFD_RELOC_CRIS_32_PLT_GOTREL 32-bit offset to symbol with PLT entry, relative to GOT. @end deffn @deffn {} BFD_RELOC_CRIS_32_PLT_PCREL 32-bit offset to symbol with PLT entry, relative to this relocation. @end deffn @deffn {} BFD_RELOC_860_COPY @deffnx {} BFD_RELOC_860_GLOB_DAT @deffnx {} BFD_RELOC_860_JUMP_SLOT @deffnx {} BFD_RELOC_860_RELATIVE @deffnx {} BFD_RELOC_860_PC26 @deffnx {} BFD_RELOC_860_PLT26 @deffnx {} BFD_RELOC_860_PC16 @deffnx {} BFD_RELOC_860_LOW0 @deffnx {} BFD_RELOC_860_SPLIT0 @deffnx {} BFD_RELOC_860_LOW1 @deffnx {} BFD_RELOC_860_SPLIT1 @deffnx {} BFD_RELOC_860_LOW2 @deffnx {} BFD_RELOC_860_SPLIT2 @deffnx {} BFD_RELOC_860_LOW3 @deffnx {} BFD_RELOC_860_LOGOT0 @deffnx {} BFD_RELOC_860_SPGOT0 @deffnx {} BFD_RELOC_860_LOGOT1 @deffnx {} BFD_RELOC_860_SPGOT1 @deffnx {} BFD_RELOC_860_LOGOTOFF0 @deffnx {} BFD_RELOC_860_SPGOTOFF0 @deffnx {} BFD_RELOC_860_LOGOTOFF1 @deffnx {} BFD_RELOC_860_SPGOTOFF1 @deffnx {} BFD_RELOC_860_LOGOTOFF2 @deffnx {} BFD_RELOC_860_LOGOTOFF3 @deffnx {} BFD_RELOC_860_LOPC @deffnx {} BFD_RELOC_860_HIGHADJ @deffnx {} BFD_RELOC_860_HAGOT @deffnx {} BFD_RELOC_860_HAGOTOFF @deffnx {} BFD_RELOC_860_HAPC @deffnx {} BFD_RELOC_860_HIGH @deffnx {} BFD_RELOC_860_HIGOT @deffnx {} BFD_RELOC_860_HIGOTOFF Intel i860 Relocations. @end deffn @deffn {} BFD_RELOC_OPENRISC_ABS_26 @deffnx {} BFD_RELOC_OPENRISC_REL_26 OpenRISC Relocations. @end deffn @deffn {} BFD_RELOC_H8_DIR16A8 @deffnx {} BFD_RELOC_H8_DIR16R8 @deffnx {} BFD_RELOC_H8_DIR24A8 @deffnx {} BFD_RELOC_H8_DIR24R8 @deffnx {} BFD_RELOC_H8_DIR32A16 H8 elf Relocations. @end deffn @deffn {} BFD_RELOC_XSTORMY16_REL_12 @deffnx {} BFD_RELOC_XSTORMY16_12 @deffnx {} BFD_RELOC_XSTORMY16_24 @deffnx {} BFD_RELOC_XSTORMY16_FPTR16 Sony Xstormy16 Relocations. @end deffn @deffn {} BFD_RELOC_RELC Self-describing complex relocations. @end deffn @deffn {} BFD_RELOC_XC16X_PAG @deffnx {} BFD_RELOC_XC16X_POF @deffnx {} BFD_RELOC_XC16X_SEG @deffnx {} BFD_RELOC_XC16X_SOF Infineon Relocations. @end deffn @deffn {} BFD_RELOC_VAX_GLOB_DAT @deffnx {} BFD_RELOC_VAX_JMP_SLOT @deffnx {} BFD_RELOC_VAX_RELATIVE Relocations used by VAX ELF. @end deffn @deffn {} BFD_RELOC_MT_PC16 Morpho MT - 16 bit immediate relocation. @end deffn @deffn {} BFD_RELOC_MT_HI16 Morpho MT - Hi 16 bits of an address. @end deffn @deffn {} BFD_RELOC_MT_LO16 Morpho MT - Low 16 bits of an address. @end deffn @deffn {} BFD_RELOC_MT_GNU_VTINHERIT Morpho MT - Used to tell the linker which vtable entries are used. @end deffn @deffn {} BFD_RELOC_MT_GNU_VTENTRY Morpho MT - Used to tell the linker which vtable entries are used. @end deffn @deffn {} BFD_RELOC_MT_PCINSN8 Morpho MT - 8 bit immediate relocation. @end deffn @deffn {} BFD_RELOC_MSP430_10_PCREL @deffnx {} BFD_RELOC_MSP430_16_PCREL @deffnx {} BFD_RELOC_MSP430_16 @deffnx {} BFD_RELOC_MSP430_16_PCREL_BYTE @deffnx {} BFD_RELOC_MSP430_16_BYTE @deffnx {} BFD_RELOC_MSP430_2X_PCREL @deffnx {} BFD_RELOC_MSP430_RL_PCREL msp430 specific relocation codes @end deffn @deffn {} BFD_RELOC_IQ2000_OFFSET_16 @deffnx {} BFD_RELOC_IQ2000_OFFSET_21 @deffnx {} BFD_RELOC_IQ2000_UHI16 IQ2000 Relocations. @end deffn @deffn {} BFD_RELOC_XTENSA_RTLD Special Xtensa relocation used only by PLT entries in ELF shared objects to indicate that the runtime linker should set the value to one of its own internal functions or data structures. @end deffn @deffn {} BFD_RELOC_XTENSA_GLOB_DAT @deffnx {} BFD_RELOC_XTENSA_JMP_SLOT @deffnx {} BFD_RELOC_XTENSA_RELATIVE Xtensa relocations for ELF shared objects. @end deffn @deffn {} BFD_RELOC_XTENSA_PLT Xtensa relocation used in ELF object files for symbols that may require PLT entries. Otherwise, this is just a generic 32-bit relocation. @end deffn @deffn {} BFD_RELOC_XTENSA_DIFF8 @deffnx {} BFD_RELOC_XTENSA_DIFF16 @deffnx {} BFD_RELOC_XTENSA_DIFF32 Xtensa relocations to mark the difference of two local symbols. These are only needed to support linker relaxation and can be ignored when not relaxing. The field is set to the value of the difference assuming no relaxation. The relocation encodes the position of the first symbol so the linker can determine whether to adjust the field value. @end deffn @deffn {} BFD_RELOC_XTENSA_SLOT0_OP @deffnx {} BFD_RELOC_XTENSA_SLOT1_OP @deffnx {} BFD_RELOC_XTENSA_SLOT2_OP @deffnx {} BFD_RELOC_XTENSA_SLOT3_OP @deffnx {} BFD_RELOC_XTENSA_SLOT4_OP @deffnx {} BFD_RELOC_XTENSA_SLOT5_OP @deffnx {} BFD_RELOC_XTENSA_SLOT6_OP @deffnx {} BFD_RELOC_XTENSA_SLOT7_OP @deffnx {} BFD_RELOC_XTENSA_SLOT8_OP @deffnx {} BFD_RELOC_XTENSA_SLOT9_OP @deffnx {} BFD_RELOC_XTENSA_SLOT10_OP @deffnx {} BFD_RELOC_XTENSA_SLOT11_OP @deffnx {} BFD_RELOC_XTENSA_SLOT12_OP @deffnx {} BFD_RELOC_XTENSA_SLOT13_OP @deffnx {} BFD_RELOC_XTENSA_SLOT14_OP Generic Xtensa relocations for instruction operands. Only the slot number is encoded in the relocation. The relocation applies to the last PC-relative immediate operand, or if there are no PC-relative immediates, to the last immediate operand. @end deffn @deffn {} BFD_RELOC_XTENSA_SLOT0_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT1_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT2_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT3_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT4_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT5_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT6_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT7_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT8_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT9_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT10_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT11_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT12_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT13_ALT @deffnx {} BFD_RELOC_XTENSA_SLOT14_ALT Alternate Xtensa relocations. Only the slot is encoded in the relocation. The meaning of these relocations is opcode-specific. @end deffn @deffn {} BFD_RELOC_XTENSA_OP0 @deffnx {} BFD_RELOC_XTENSA_OP1 @deffnx {} BFD_RELOC_XTENSA_OP2 Xtensa relocations for backward compatibility. These have all been replaced by BFD_RELOC_XTENSA_SLOT0_OP. @end deffn @deffn {} BFD_RELOC_XTENSA_ASM_EXPAND Xtensa relocation to mark that the assembler expanded the instructions from an original target. The expansion size is encoded in the reloc size. @end deffn @deffn {} BFD_RELOC_XTENSA_ASM_SIMPLIFY Xtensa relocation to mark that the linker should simplify assembler-expanded instructions. This is commonly used internally by the linker after analysis of a BFD_RELOC_XTENSA_ASM_EXPAND. @end deffn @deffn {} BFD_RELOC_Z80_DISP8 8 bit signed offset in (ix+d) or (iy+d). @end deffn @deffn {} BFD_RELOC_Z8K_DISP7 DJNZ offset. @end deffn @deffn {} BFD_RELOC_Z8K_CALLR CALR offset. @end deffn @deffn {} BFD_RELOC_Z8K_IMM4L 4 bit value. @end deffn @example typedef enum bfd_reloc_code_real bfd_reloc_code_real_type; @end example @findex bfd_reloc_type_lookup @subsubsection @code{bfd_reloc_type_lookup} @strong{Synopsis} @example reloc_howto_type *bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code); @end example @strong{Description}@* Return a pointer to a howto structure which, when invoked, will perform the relocation @var{code} on data from the architecture noted. @findex bfd_default_reloc_type_lookup @subsubsection @code{bfd_default_reloc_type_lookup} @strong{Synopsis} @example reloc_howto_type *bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code); @end example @strong{Description}@* Provides a default relocation lookup routine for any architecture. @findex bfd_get_reloc_code_name @subsubsection @code{bfd_get_reloc_code_name} @strong{Synopsis} @example const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code); @end example @strong{Description}@* Provides a printable name for the supplied relocation code. Useful mainly for printing error messages. @findex bfd_generic_relax_section @subsubsection @code{bfd_generic_relax_section} @strong{Synopsis} @example bfd_boolean bfd_generic_relax_section (bfd *abfd, asection *section, struct bfd_link_info *, bfd_boolean *); @end example @strong{Description}@* Provides default handling for relaxing for back ends which don't do relaxing. @findex bfd_generic_gc_sections @subsubsection @code{bfd_generic_gc_sections} @strong{Synopsis} @example bfd_boolean bfd_generic_gc_sections (bfd *, struct bfd_link_info *); @end example @strong{Description}@* Provides default handling for relaxing for back ends which don't do section gc -- i.e., does nothing. @findex bfd_generic_merge_sections @subsubsection @code{bfd_generic_merge_sections} @strong{Synopsis} @example bfd_boolean bfd_generic_merge_sections (bfd *, struct bfd_link_info *); @end example @strong{Description}@* Provides default handling for SEC_MERGE section merging for back ends which don't have SEC_MERGE support -- i.e., does nothing. @findex bfd_generic_get_relocated_section_contents @subsubsection @code{bfd_generic_get_relocated_section_contents} @strong{Synopsis} @example bfd_byte *bfd_generic_get_relocated_section_contents (bfd *abfd, struct bfd_link_info *link_info, struct bfd_link_order *link_order, bfd_byte *data, bfd_boolean relocatable, asymbol **symbols); @end example @strong{Description}@* Provides default handling of relocation effort for back ends which can't be bothered to do it efficiently.