cmyk.c   [plain text]

/*
 * "$Id: cmyk.c 861 2008-07-15 01:33:27Z msweet $"
 *
 *   CMYK color separation code for CUPS.
 *
 *   Copyright 2007-2008 by Apple Inc.
 *   Copyright 1993-2005 by Easy Software Products.
 *
 *   These coded instructions, statements, and computer programs are the
 *   property of Apple Inc. and are protected by Federal copyright
 *   law.  Distribution and use rights are outlined in the file "LICENSE.txt"
 *   which should have been included with this file.  If this file is
 *   file is missing or damaged, see the license at "http://www.cups.org/".
 *
 * Contents:
 *
 *   cupsCMYKDelete()      - Delete a color separation.
 *   cupsCMYKDoBlack()     - Do a black separation...
 *   cupsCMYKDoCMYK()      - Do a CMYK separation...
 *   cupsCMYKDoGray()      - Do a grayscale separation...
 *   cupsCMYKDoRGB()       - Do an sRGB separation...
 *   cupsCMYKLoad()        - Load a CMYK color profile from PPD attributes.
 *   cupsCMYKNew()         - Create a new CMYK color separation.
 *   cupsCMYKSetBlack()    - Set the transition range for CMY to black.
 *   cupsCMYKSetCurve()    - Set a color transform curve using points.
 *   cupsCMYKSetGamma()    - Set a color transform curve using gamma and
 *                           density.
 *   cupsCMYKSetInkLimit() - Set the limit on the amount of ink.
 *   cupsCMYKSetLtDk()     - Set light/dark ink transforms.
 */

/*
 * Include necessary headers.
 */

#include "driver.h"
#include <cups/string.h>


/*
 * 'cupsCMYKDelete()' - Delete a color separation.
 */

void
cupsCMYKDelete(cups_cmyk_t *cmyk)	/* I - Color separation */
{
 /*
  * Range check input...
  */

  if (cmyk == NULL)
    return;

 /*
  * Free memory used...
  */

  free(cmyk->channels[0]);
  free(cmyk);
}


/*
 * 'cupsCMYKDoBlack()' - Do a black separation...
 */

void
cupsCMYKDoBlack(const cups_cmyk_t   *cmyk,
					/* I - Color separation */
		const unsigned char *input,
					/* I - Input grayscale pixels */
		short               *output,
					/* O - Output Device-N pixels */
		int                 num_pixels)
					/* I - Number of pixels */
{
  int			k;		/* Current black value */
  const short		**channels;	/* Copy of channel LUTs */
  int			ink,		/* Amount of ink */
			ink_limit;	/* Ink limit from separation */


 /*
  * Range check input...
  */

  if (cmyk == NULL || input == NULL || output == NULL || num_pixels <= 0)
    return;

 /*
  * Loop through it all...
  */

  channels  = (const short **)cmyk->channels;
  ink_limit = cmyk->ink_limit;

  switch (cmyk->num_channels)
  {
    case 1 : /* Black */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = *input++;
	  *output++ = channels[0][k];

          num_pixels --;
        }
	break;

    case 2 : /* Black, light black */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = *input++;
	  output[0] = channels[0][k];
	  output[1] = channels[1][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	    }
	  }

          output += 2;
          num_pixels --;
        }
	break;

    case 3 : /* CMY */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = *input++;
	  output[0] = channels[0][k];
	  output[1] = channels[1][k];
	  output[2] = channels[2][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	    }
	  }

          output += 3;
          num_pixels --;
        }
	break;

    case 4 : /* CMYK */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = *input++;
	  *output++ = 0;
	  *output++ = 0;
	  *output++ = 0;
	  *output++ = channels[3][k];

          num_pixels --;
        }
	break;

    case 6 : /* CcMmYK */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = *input++;
	  *output++ = 0;
	  *output++ = 0;
	  *output++ = 0;
	  *output++ = 0;
	  *output++ = 0;
	  *output++ = channels[5][k];

          num_pixels --;
        }
	break;

    case 7 : /* CcMmYKk */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = *input++;
	  output[0] = 0;
	  output[1] = 0;
	  output[2] = 0;
	  output[3] = 0;
	  output[4] = 0;
	  output[5] = channels[5][k];
	  output[6] = channels[6][k];

          if (ink_limit)
	  {
	    ink = output[5] + output[6];

	    if (ink > ink_limit)
	    {
	      output[5] = ink_limit * output[5] / ink;
	      output[6] = ink_limit * output[6] / ink;
	    }
	  }

          output += 7;
          num_pixels --;
        }
	break;
  }
}


/*
 * 'cupsCMYKDoCMYK()' - Do a CMYK separation...
 */

void
cupsCMYKDoCMYK(const cups_cmyk_t   *cmyk,
					/* I - Color separation */
	       const unsigned char *input,
					/* I - Input grayscale pixels */
	       short               *output,
					/* O - Output Device-N pixels */
	       int                 num_pixels)
					/* I - Number of pixels */
{
  int			c,		/* Current cyan value */
			m,		/* Current magenta value */
			y,		/* Current yellow value */
			k;		/* Current black value */
  const short		**channels;	/* Copy of channel LUTs */
  int			ink,		/* Amount of ink */
			ink_limit;	/* Ink limit from separation */


 /*
  * Range check input...
  */

  if (cmyk == NULL || input == NULL || output == NULL || num_pixels <= 0)
    return;

 /*
  * Loop through it all...
  */

  channels  = (const short **)cmyk->channels;
  ink_limit = cmyk->ink_limit;

  switch (cmyk->num_channels)
  {
    case 1 : /* Black */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c = *input++;
	  m = *input++;
	  y = *input++;
	  k = *input++ + (c * 31 + m * 61 + y * 8) / 100;

	  if (k < 255)
	    *output++ = channels[0][k];
	  else
	    *output++ = channels[0][255];

          num_pixels --;
        }
	break;

    case 2 : /* Black, light black */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c = *input++;
	  m = *input++;
	  y = *input++;
	  k = *input++ + (c * 31 + m * 61 + y * 8) / 100;

	  if (k < 255)
	  {
	    output[0] = channels[0][k];
	    output[1] = channels[1][k];
	  }
	  else
	  {
	    output[0] = channels[0][255];
	    output[1] = channels[1][255];
	  }

          if (ink_limit)
	  {
	    ink = output[0] + output[1];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	    }
	  }

          output += 2;
          num_pixels --;
        }
	break;

    case 3 : /* CMY */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c = *input++;
	  m = *input++;
	  y = *input++;
	  k = *input++;
	  c += k;
	  m += k;
	  y += k;

	  if (c < 255)
	    output[0] = channels[0][c];
	  else
	    output[0] = channels[0][255];

	  if (m < 255)
	    output[1] = channels[1][m];
	  else
	    output[1] = channels[1][255];

	  if (y < 255)
	    output[2] = channels[2][y];
	  else
	    output[2] = channels[2][255];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	    }
	  }

          output += 3;
          num_pixels --;
        }
	break;

    case 4 : /* CMYK */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c         = *input++;
	  m         = *input++;
	  y         = *input++;
	  k         = *input++;

	  output[0] = channels[0][c];
	  output[1] = channels[1][m];
	  output[2] = channels[2][y];
	  output[3] = channels[3][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2] + output[3];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	      output[3] = ink_limit * output[3] / ink;
	    }
	  }

          output += 4;
          num_pixels --;
        }
	break;

    case 6 : /* CcMmYK */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c         = *input++;
	  m         = *input++;
	  y         = *input++;
	  k         = *input++;

	  output[0] = channels[0][c];
	  output[1] = channels[1][c];
	  output[2] = channels[2][m];
	  output[3] = channels[3][m];
	  output[4] = channels[4][y];
	  output[5] = channels[5][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2] + output[3] +
	          output[4] + output[5];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	      output[3] = ink_limit * output[3] / ink;
	      output[4] = ink_limit * output[4] / ink;
	      output[5] = ink_limit * output[5] / ink;
	    }
	  }

          output += 6;
          num_pixels --;
        }
	break;

    case 7 : /* CcMmYKk */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c         = *input++;
	  m         = *input++;
	  y         = *input++;
	  k         = *input++;

	  output[0] = channels[0][c];
	  output[1] = channels[1][c];
	  output[2] = channels[2][m];
	  output[3] = channels[3][m];
	  output[4] = channels[4][y];
	  output[5] = channels[5][k];
	  output[6] = channels[6][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2] + output[3] +
	          output[4] + output[5] + output[6];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	      output[3] = ink_limit * output[3] / ink;
	      output[4] = ink_limit * output[4] / ink;
	      output[5] = ink_limit * output[5] / ink;
	      output[6] = ink_limit * output[6] / ink;
	    }
	  }

          output += 7;
          num_pixels --;
        }
	break;
  }
}


/*
 * 'cupsCMYKDoGray()' - Do a grayscale separation...
 */

void
cupsCMYKDoGray(const cups_cmyk_t   *cmyk,
					/* I - Color separation */
	       const unsigned char *input,
					/* I - Input grayscale pixels */
	       short               *output,
					/* O - Output Device-N pixels */
	       int                 num_pixels)
					/* I - Number of pixels */
{
  int			k,		/* Current black value */
			kc;		/* Current black color value */
  const short		**channels;	/* Copy of channel LUTs */
  int			ink,		/* Amount of ink */
			ink_limit;	/* Ink limit from separation */


 /*
  * Range check input...
  */

  if (cmyk == NULL || input == NULL || output == NULL || num_pixels <= 0)
    return;

 /*
  * Loop through it all...
  */

  channels  = (const short **)cmyk->channels;
  ink_limit = cmyk->ink_limit;

  switch (cmyk->num_channels)
  {
    case 1 : /* Black */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = cups_scmy_lut[*input++];
	  *output++ = channels[0][k];

          num_pixels --;
        }
	break;

    case 2 : /* Black, light black */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = cups_scmy_lut[*input++];
	  output[0] = channels[0][k];
	  output[1] = channels[1][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	    }
	  }

          output += 2;
          num_pixels --;
        }
	break;

    case 3 : /* CMY */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = cups_scmy_lut[*input++];
	  output[0] = channels[0][k];
	  output[1] = channels[1][k];
	  output[2] = channels[2][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	    }
	  }

          output += 3;
          num_pixels --;
        }
	break;

    case 4 : /* CMYK */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = cups_scmy_lut[*input++];
	  kc        = cmyk->color_lut[k];
	  k         = cmyk->black_lut[k];
	  output[0] = channels[0][kc];
	  output[1] = channels[1][kc];
	  output[2] = channels[2][kc];
	  output[3] = channels[3][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2] + output[3];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	      output[3] = ink_limit * output[3] / ink;
	    }
	  }

          output += 4;
          num_pixels --;
        }
	break;

    case 6 : /* CcMmYK */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = cups_scmy_lut[*input++];
	  kc        = cmyk->color_lut[k];
	  k         = cmyk->black_lut[k];
	  output[0] = channels[0][kc];
	  output[1] = channels[1][kc];
	  output[2] = channels[2][kc];
	  output[3] = channels[3][kc];
	  output[4] = channels[4][kc];
	  output[5] = channels[5][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2] + output[3] +
	          output[4] + output[5];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	      output[3] = ink_limit * output[3] / ink;
	      output[4] = ink_limit * output[4] / ink;
	      output[5] = ink_limit * output[5] / ink;
	    }
	  }

          output += 6;
          num_pixels --;
        }
	break;

    case 7 : /* CcMmYKk */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  k         = cups_scmy_lut[*input++];
	  kc        = cmyk->color_lut[k];
	  k         = cmyk->black_lut[k];
	  output[0] = channels[0][kc];
	  output[1] = channels[1][kc];
	  output[2] = channels[2][kc];
	  output[3] = channels[3][kc];
	  output[4] = channels[4][kc];
	  output[5] = channels[5][k];
	  output[6] = channels[6][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2] + output[3] +
	          output[4] + output[5] + output[6];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	      output[3] = ink_limit * output[3] / ink;
	      output[4] = ink_limit * output[4] / ink;
	      output[5] = ink_limit * output[5] / ink;
	      output[6] = ink_limit * output[6] / ink;
	    }
	  }

          output += 7;
          num_pixels --;
        }
	break;
  }
}


/*
 * 'cupsCMYKDoRGB()' - Do an sRGB separation...
 */

void
cupsCMYKDoRGB(const cups_cmyk_t   *cmyk,
					/* I - Color separation */
	      const unsigned char *input,
					/* I - Input grayscale pixels */
	      short               *output,
					/* O - Output Device-N pixels */
	      int                 num_pixels)
					/* I - Number of pixels */
{
  int			c,		/* Current cyan value */
			m,		/* Current magenta value */
			y,		/* Current yellow value */
			k,		/* Current black value */
			kc,		/* Current black color value */
			km;		/* Maximum black value */
  const short		**channels;	/* Copy of channel LUTs */
  int			ink,		/* Amount of ink */
			ink_limit;	/* Ink limit from separation */


 /*
  * Range check input...
  */

  if (cmyk == NULL || input == NULL || output == NULL || num_pixels <= 0)
    return;

 /*
  * Loop through it all...
  */

  channels  = (const short **)cmyk->channels;
  ink_limit = cmyk->ink_limit;

  switch (cmyk->num_channels)
  {
    case 1 : /* Black */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c = cups_scmy_lut[*input++];
	  m = cups_scmy_lut[*input++];
	  y = cups_scmy_lut[*input++];
	  k = (c * 31 + m * 61 + y * 8) / 100;

          *output++ = channels[0][k];

          num_pixels --;
        }
	break;

    case 2 : /* Black, light black */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c = cups_scmy_lut[*input++];
	  m = cups_scmy_lut[*input++];
	  y = cups_scmy_lut[*input++];
	  k = (c * 31 + m * 61 + y * 8) / 100;

          output[0] = channels[0][k];
          output[1] = channels[1][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	    }
	  }

          output += 2;
          num_pixels --;
        }
	break;

    case 3 : /* CMY */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c = cups_scmy_lut[*input++];
	  m = cups_scmy_lut[*input++];
	  y = cups_scmy_lut[*input++];

	  output[0] = channels[0][c];
          output[1] = channels[1][m];
	  output[2] = channels[2][y];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	    }
	  }

          output += 3;
          num_pixels --;
        }
	break;

    case 4 : /* CMYK */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c  = cups_scmy_lut[*input++];
	  m  = cups_scmy_lut[*input++];
	  y  = cups_scmy_lut[*input++];
	  k  = min(c, min(m, y));

	  if ((km = max(c, max(m, y))) > k)
            k = k * k * k / (km * km);

	  kc = cmyk->color_lut[k] - k;
	  k  = cmyk->black_lut[k];
	  c  += kc;
	  m  += kc;
	  y  += kc;

	  output[0] = channels[0][c];
          output[1] = channels[1][m];
	  output[2] = channels[2][y];
	  output[3] = channels[3][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2] + output[3];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	      output[3] = ink_limit * output[3] / ink;
	    }
	  }

          output += 4;
          num_pixels --;
        }
	break;

    case 6 : /* CcMmYK */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c  = cups_scmy_lut[*input++];
	  m  = cups_scmy_lut[*input++];
	  y  = cups_scmy_lut[*input++];
	  k  = min(c, min(m, y));

	  if ((km = max(c, max(m, y))) > k)
            k = k * k * k / (km * km);

	  kc = cmyk->color_lut[k] - k;
	  k  = cmyk->black_lut[k];
	  c  += kc;
	  m  += kc;
	  y  += kc;

	  output[0] = channels[0][c];
	  output[1] = channels[1][c];
	  output[2] = channels[2][m];
	  output[3] = channels[3][m];
	  output[4] = channels[4][y];
	  output[5] = channels[5][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2] + output[3] +
	          output[4] + output[5];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	      output[3] = ink_limit * output[3] / ink;
	      output[4] = ink_limit * output[4] / ink;
	      output[5] = ink_limit * output[5] / ink;
	    }
	  }

          output += 6;
          num_pixels --;
        }
	break;

    case 7 : /* CcMmYKk */
        while (num_pixels > 0)
        {
	 /*
	  * Get the input black value and then set the corresponding color
	  * channel values...
	  */

	  c  = cups_scmy_lut[*input++];
	  m  = cups_scmy_lut[*input++];
	  y  = cups_scmy_lut[*input++];
	  k  = min(c, min(m, y));

	  if ((km = max(c, max(m, y))) > k)
            k = k * k * k / (km * km);

	  kc = cmyk->color_lut[k] - k;
	  k  = cmyk->black_lut[k];
	  c  += kc;
	  m  += kc;
	  y  += kc;

	  output[0] = channels[0][c];
	  output[1] = channels[1][c];
	  output[2] = channels[2][m];
	  output[3] = channels[3][m];
	  output[4] = channels[4][y];
	  output[5] = channels[5][k];
	  output[6] = channels[6][k];

          if (ink_limit)
	  {
	    ink = output[0] + output[1] + output[2] + output[3] +
	          output[4] + output[5] + output[6];

	    if (ink > ink_limit)
	    {
	      output[0] = ink_limit * output[0] / ink;
	      output[1] = ink_limit * output[1] / ink;
	      output[2] = ink_limit * output[2] / ink;
	      output[3] = ink_limit * output[3] / ink;
	      output[4] = ink_limit * output[4] / ink;
	      output[5] = ink_limit * output[5] / ink;
	      output[6] = ink_limit * output[6] / ink;
	    }
	  }

          output += 7;
          num_pixels --;
        }
	break;
  }
}


/*
 * 'cupsCMYKLoad()' - Load a CMYK color profile from PPD attributes.
 */

cups_cmyk_t *				/* O - CMYK color separation */
cupsCMYKLoad(ppd_file_t *ppd,		/* I - PPD file */
	     const char *colormodel,	/* I - ColorModel value */
	     const char *media,		/* I - MediaType value */
	     const char *resolution)	/* I - Resolution value */
{
  cups_cmyk_t	*cmyk;			/* CMYK color separation */
  char		spec[PPD_MAX_NAME];	/* Profile name */
  ppd_attr_t	*attr;			/* Attribute from PPD file */
  int		num_channels;		/* Number of color components */
  float		gamval,			/* Gamma correction value */
		density,		/* Density value */
		light,			/* Light ink limit */
		dark,			/* Light ink cut-off */
		lower,			/* Start of black ink */
		upper;			/* End of color ink */
  int		num_xypoints;		/* Number of X,Y points */
  float		xypoints[100 * 2],	/* X,Y points */
		*xyptr;			/* Current X,Y point */


 /*
  * Range check input...
  */

  if (ppd == NULL || colormodel == NULL || resolution == NULL || media == NULL)
    return (NULL);

 /*
  * Find the following attributes:
  *
  *     cupsAllGamma          - Set default curve using gamma + density
  *     cupsAllXY             - Set default curve using XY points
  *     cupsBlackGamma        - Set black curve using gamma + density
  *     cupsBlackGeneration   - Set black generation
  *     cupsBlackLightDark    - Set black light/dark transition
  *     cupsBlackXY           - Set black curve using XY points
  *     cupsCyanGamma         - Set cyan curve using gamma + density
  *     cupsCyanLightDark     - Set cyan light/dark transition
  *     cupsCyanXY            - Set cyan curve using XY points
  *     cupsInkChannels       - Set number of color channels
  *     cupsInkLimit          - Set total ink limit
  *     cupsLightBlackGamma   - Set light black curve using gamma + density
  *     cupsLightBlackXY      - Set light black curve using XY points
  *     cupsLightCyanGamma    - Set light cyan curve using gamma + density
  *     cupsLightCyanXY       - Set light cyan curve using XY points
  *     cupsLightMagentaGamma - Set light magenta curve using gamma + density
  *     cupsLightMagentaXY    - Set light magenta curve using XY points
  *     cupsMagentaGamma      - Set magenta curve using gamma + density
  *     cupsMagentaLightDark  - Set magenta light/dark transition
  *     cupsMagentaXY         - Set magenta curve using XY points
  *     cupsYellowGamma       - Set yellow curve using gamma + density
  *     cupsYellowXY          - Set yellow curve using XY points
  *
  * The only required attribute is cupsInkChannels.
  *
  * The *XY attributes have precedence over the *Gamma attributes, and
  * the *Light* attributes have precedence over the corresponding
  * *LightDark* attributes.
  */

 /*
  * Get the required cupsInkChannels attribute...
  */

  if ((attr = cupsFindAttr(ppd, "cupsInkChannels", colormodel, media,
                           resolution, spec, sizeof(spec))) == NULL)
    return (NULL);

  num_channels = atoi(attr->value);

  if (num_channels < 1 || num_channels > 7 || num_channels == 5)
    return (NULL);

  if ((cmyk = cupsCMYKNew(num_channels)) == NULL)
    return (NULL);

 /*
  * Get the optional cupsInkLimit attribute...
  */

  if ((attr = cupsFindAttr(ppd, "cupsInkLimit", colormodel, media,
                           resolution, spec, sizeof(spec))) != NULL)
    cupsCMYKSetInkLimit(cmyk, atof(attr->value));

 /*
  * Get the optional cupsBlackGeneration attribute...
  */

  if ((attr = cupsFindAttr(ppd, "cupsBlackGeneration", colormodel, media,
                           resolution, spec, sizeof(spec))) != NULL)
  {
    if (sscanf(attr->value, "%f%f", &lower, &upper) == 2)
      cupsCMYKSetBlack(cmyk, lower, upper);
  }

 /*
  * Get the optional cupsBlackXY or cupsBlackGamma attributes...
  */

  if (num_channels != 3)
  {
    if ((attr = cupsFindAttr(ppd, "cupsBlackXY", colormodel, media,
                             resolution, spec, sizeof(spec))) != NULL)
    {
      for (num_xypoints = 0, xyptr = xypoints;
           attr != NULL && attr->value != NULL && num_xypoints < 100;
	   attr = ppdFindNextAttr(ppd, "cupsBlackXY", spec))
	if (sscanf(attr->value, "%f%f", xyptr, xyptr + 1) == 2)
	{
          num_xypoints ++;
	  xyptr += 2;
	}

      switch (num_channels)
      {
	case 1 :
	case 2 :
            cupsCMYKSetCurve(cmyk, 0, num_xypoints, xypoints);
	    break;
	case 4 :
            cupsCMYKSetCurve(cmyk, 3, num_xypoints, xypoints);
	    break;
	case 6 :
	case 7 :
            cupsCMYKSetCurve(cmyk, 5, num_xypoints, xypoints);
	    break;
      }
    }
    else if ((attr = cupsFindAttr(ppd, "cupsBlackGamma", colormodel,
                                  media, resolution, spec,
				  sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &gamval, &density) == 2)
	switch (num_channels)
	{
	  case 1 :
	  case 2 :
              cupsCMYKSetGamma(cmyk, 0, gamval, density);
	      break;
	  case 4 :
              cupsCMYKSetGamma(cmyk, 3, gamval, density);
	      break;
	  case 6 :
	  case 7 :
              cupsCMYKSetGamma(cmyk, 5, gamval, density);
	      break;
	}
    }
    else if ((attr = cupsFindAttr(ppd, "cupsAllXY", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      for (num_xypoints = 0, xyptr = xypoints;
           attr != NULL && attr->value != NULL && num_xypoints < 100;
	   attr = ppdFindNextAttr(ppd, "cupsAllXY", spec))
	if (sscanf(attr->value, "%f%f", xyptr, xyptr + 1) == 2)
	{
          num_xypoints ++;
	  xyptr += 2;
	}

      switch (num_channels)
      {
	case 1 :
	case 2 :
            cupsCMYKSetCurve(cmyk, 0, num_xypoints, xypoints);
	    break;
	case 4 :
            cupsCMYKSetCurve(cmyk, 3, num_xypoints, xypoints);
	    break;
	case 6 :
	case 7 :
            cupsCMYKSetCurve(cmyk, 5, num_xypoints, xypoints);
	    break;
      }
    }
    else if ((attr = cupsFindAttr(ppd, "cupsAllGamma", colormodel,
                                  media, resolution, spec,
				  sizeof(spec))) != NULL &&
             num_channels != 3)
    {
      if (sscanf(attr->value, "%f%f", &gamval, &density) == 2)
	switch (num_channels)
	{
	  case 1 :
	  case 2 :
              cupsCMYKSetGamma(cmyk, 0, gamval, density);
	      break;
	  case 4 :
              cupsCMYKSetGamma(cmyk, 3, gamval, density);
	      break;
	  case 6 :
	  case 7 :
              cupsCMYKSetGamma(cmyk, 5, gamval, density);
	      break;
	}
    }
  }

  if (num_channels > 2)
  {
   /*
    * Get the optional cupsCyanXY or cupsCyanGamma attributes...
    */

    if ((attr = cupsFindAttr(ppd, "cupsCyanXY", colormodel, media,
                             resolution, spec, sizeof(spec))) != NULL)
    {
      for (num_xypoints = 0, xyptr = xypoints;
           attr != NULL && attr->value != NULL && num_xypoints < 100;
	   attr = ppdFindNextAttr(ppd, "cupsCyanXY", spec))
	if (sscanf(attr->value, "%f%f", xyptr, xyptr + 1) == 2)
	{
          num_xypoints ++;
	  xyptr += 2;
	}

      cupsCMYKSetCurve(cmyk, 0, num_xypoints, xypoints);
    }
    else if ((attr = cupsFindAttr(ppd, "cupsCyanGamma", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &gamval, &density) == 2)
	cupsCMYKSetGamma(cmyk, 0, gamval, density);
    }
    else if ((attr = cupsFindAttr(ppd, "cupsAllXY", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      for (num_xypoints = 0, xyptr = xypoints;
           attr != NULL && attr->value != NULL && num_xypoints < 100;
	   attr = ppdFindNextAttr(ppd, "cupsAllXY", spec))
	if (sscanf(attr->value, "%f%f", xyptr, xyptr + 1) == 2)
	{
          num_xypoints ++;
	  xyptr += 2;
	}

      cupsCMYKSetCurve(cmyk, 0, num_xypoints, xypoints);
    }
    else if ((attr = cupsFindAttr(ppd, "cupsAllGamma", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &gamval, &density) == 2)
	cupsCMYKSetGamma(cmyk, 0, gamval, density);
    }

   /*
    * Get the optional cupsMagentaXY or cupsMagentaGamma attributes...
    */

    if ((attr = cupsFindAttr(ppd, "cupsMagentaXY", colormodel, media,
                             resolution, spec, sizeof(spec))) != NULL)
    {
      for (num_xypoints = 0, xyptr = xypoints;
           attr != NULL && attr->value != NULL && num_xypoints < 100;
	   attr = ppdFindNextAttr(ppd, "cupsMagentaXY", spec))
	if (sscanf(attr->value, "%f%f", xyptr, xyptr + 1) == 2)
	{
          num_xypoints ++;
	  xyptr += 2;
	}

      switch (num_channels)
      {
	case 3 :
	case 4 :
            cupsCMYKSetCurve(cmyk, 1, num_xypoints, xypoints);
	    break;
	case 6 :
	case 7 :
            cupsCMYKSetCurve(cmyk, 2, num_xypoints, xypoints);
	    break;
      }
    }
    else if ((attr = cupsFindAttr(ppd, "cupsMagentaGamma", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &gamval, &density) == 2)
	switch (num_channels)
	{
	  case 3 :
	  case 4 :
              cupsCMYKSetGamma(cmyk, 1, gamval, density);
	      break;
	  case 6 :
	  case 7 :
              cupsCMYKSetGamma(cmyk, 2, gamval, density);
	      break;
	}
    }
    else if ((attr = cupsFindAttr(ppd, "cupsAllXY", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      for (num_xypoints = 0, xyptr = xypoints;
           attr != NULL && attr->value != NULL && num_xypoints < 100;
	   attr = ppdFindNextAttr(ppd, "cupsAllXY", spec))
	if (sscanf(attr->value, "%f%f", xyptr, xyptr + 1) == 2)
	{
          num_xypoints ++;
	  xyptr += 2;
	}

      switch (num_channels)
      {
	case 3 :
	case 4 :
            cupsCMYKSetCurve(cmyk, 1, num_xypoints, xypoints);
	    break;
	case 6 :
	case 7 :
            cupsCMYKSetCurve(cmyk, 2, num_xypoints, xypoints);
	    break;
      }
    }
    else if ((attr = cupsFindAttr(ppd, "cupsAllGamma", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &gamval, &density) == 2)
	switch (num_channels)
	{
	  case 3 :
	  case 4 :
              cupsCMYKSetGamma(cmyk, 1, gamval, density);
	      break;
	  case 6 :
	  case 7 :
              cupsCMYKSetGamma(cmyk, 2, gamval, density);
	      break;
	}
    }

   /*
    * Get the optional cupsYellowXY or cupsYellowGamma attributes...
    */

    if ((attr = cupsFindAttr(ppd, "cupsYellowXY", colormodel, media,
                             resolution, spec, sizeof(spec))) != NULL)
    {
      for (num_xypoints = 0, xyptr = xypoints;
           attr != NULL && attr->value != NULL && num_xypoints < 100;
	   attr = ppdFindNextAttr(ppd, "cupsYellowXY", spec))
	if (sscanf(attr->value, "%f%f", xyptr, xyptr + 1) == 2)
	{
          num_xypoints ++;
	  xyptr += 2;
	}

      switch (num_channels)
      {
	case 3 :
	case 4 :
            cupsCMYKSetCurve(cmyk, 2, num_xypoints, xypoints);
	    break;
	case 6 :
	case 7 :
            cupsCMYKSetCurve(cmyk, 4, num_xypoints, xypoints);
	    break;
      }
    }
    else if ((attr = cupsFindAttr(ppd, "cupsYellowGamma", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &gamval, &density) == 2)
	switch (num_channels)
	{
	  case 3 :
	  case 4 :
              cupsCMYKSetGamma(cmyk, 2, gamval, density);
	      break;
	  case 6 :
	  case 7 :
              cupsCMYKSetGamma(cmyk, 4, gamval, density);
	      break;
	}
    }
    else if ((attr = cupsFindAttr(ppd, "cupsAllXY", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      for (num_xypoints = 0, xyptr = xypoints;
           attr != NULL && attr->value != NULL && num_xypoints < 100;
	   attr = ppdFindNextAttr(ppd, "cupsAllXY", spec))
	if (sscanf(attr->value, "%f%f", xyptr, xyptr + 1) == 2)
	{
          num_xypoints ++;
	  xyptr += 2;
	}

      switch (num_channels)
      {
	case 3 :
	case 4 :
            cupsCMYKSetCurve(cmyk, 2, num_xypoints, xypoints);
	    break;
	case 6 :
	case 7 :
            cupsCMYKSetCurve(cmyk, 4, num_xypoints, xypoints);
	    break;
      }
    }
    else if ((attr = cupsFindAttr(ppd, "cupsAllGamma", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &gamval, &density) == 2)
	switch (num_channels)
	{
	  case 3 :
	  case 4 :
              cupsCMYKSetGamma(cmyk, 2, gamval, density);
	      break;
	  case 6 :
	  case 7 :
              cupsCMYKSetGamma(cmyk, 4, gamval, density);
	      break;
	}
    }
  }

 /*
  * Get the optional cupsLightBlackXY, cupsLightBlackGamma, or
  * cupsBlackLtDk attributes...
  */

  if (num_channels == 2 || num_channels == 7)
  {
    if ((attr = cupsFindAttr(ppd, "cupsLightBlackXY", colormodel, media,
                             resolution, spec, sizeof(spec))) != NULL)
    {
      for (num_xypoints = 0, xyptr = xypoints;
           attr != NULL && attr->value != NULL && num_xypoints < 100;
	   attr = ppdFindNextAttr(ppd, "cupsLightBlackXY", spec))
	if (sscanf(attr->value, "%f%f", xyptr, xyptr + 1) == 2)
	{
          num_xypoints ++;
	  xyptr += 2;
	}

      switch (num_channels)
      {
	case 2 :
            cupsCMYKSetCurve(cmyk, 1, num_xypoints, xypoints);
	    break;
	case 7 :
            cupsCMYKSetCurve(cmyk, 6, num_xypoints, xypoints);
	    break;
      }
    }
    else if ((attr = cupsFindAttr(ppd, "cupsLightBlackGamma", colormodel,
                                  media, resolution, spec,
				  sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &gamval, &density) == 2)
	switch (num_channels)
	{
	  case 2 :
              cupsCMYKSetGamma(cmyk, 1, gamval, density);
	      break;
	  case 7 :
              cupsCMYKSetGamma(cmyk, 6, gamval, density);
	      break;
	}
    }
    else if ((attr = cupsFindAttr(ppd, "cupsBlackLtDk", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &light, &dark) == 2)
	switch (num_channels)
	{
	  case 2 :
              cupsCMYKSetLtDk(cmyk, 0, light, dark);
	      break;
	  case 7 :
              cupsCMYKSetLtDk(cmyk, 5, light, dark);
	      break;
	}
      else
	fprintf(stderr, "ERROR: Bad cupsBlackLtDk value \"%s\"!\n",
        	attr->value);
    }
    else
      fprintf(stderr, "WARNING: No light black attribute found for %s!\n",
              spec);
  }

  if (num_channels >= 6)
  {
   /*
    * Get the optional cupsLightCyanXY, cupsLightCyanGamma, or
    * cupsCyanLtDk attributes...
    */

    if ((attr = cupsFindAttr(ppd, "cupsLightCyanXY", colormodel, media,
                             resolution, spec, sizeof(spec))) != NULL)
    {
      for (num_xypoints = 0, xyptr = xypoints;
           attr != NULL && attr->value != NULL && num_xypoints < 100;
	   attr = ppdFindNextAttr(ppd, "cupsLightCyanXY", spec))
	if (sscanf(attr->value, "%f%f", xyptr, xyptr + 1) == 2)
	{
          num_xypoints ++;
	  xyptr += 2;
	}

      cupsCMYKSetCurve(cmyk, 1, num_xypoints, xypoints);
    }
    else if ((attr = cupsFindAttr(ppd, "cupsLightCyanGamma", colormodel,
                                  media, resolution, spec,
				  sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &gamval, &density) == 2)
	cupsCMYKSetGamma(cmyk, 1, gamval, density);
    }
    else if ((attr = cupsFindAttr(ppd, "cupsCyanLtDk", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &light, &dark) == 2)
	cupsCMYKSetLtDk(cmyk, 0, light, dark);
      else
	fprintf(stderr, "ERROR: Bad cupsCyanLtDk value \"%s\"!\n",
        	attr->value);
    }
    else
      fprintf(stderr, "WARNING: No light cyan attribute found for %s!\n",
              spec);

   /*
    * Get the optional cupsLightMagentaXY, cupsLightMagentaGamma, or
    * cupsMagentaLtDk attributes...
    */

    if ((attr = cupsFindAttr(ppd, "cupsLightMagentaXY", colormodel, media,
                             resolution, spec, sizeof(spec))) != NULL)
    {
      for (num_xypoints = 0, xyptr = xypoints;
           attr != NULL && attr->value != NULL && num_xypoints < 100;
	   attr = ppdFindNextAttr(ppd, "cupsLightMagentaXY", spec))
	if (sscanf(attr->value, "%f%f", xyptr, xyptr + 1) == 2)
	{
          num_xypoints ++;
	  xyptr += 2;
	}

      cupsCMYKSetCurve(cmyk, 3, num_xypoints, xypoints);
    }
    else if ((attr = cupsFindAttr(ppd, "cupsLightMagentaGamma", colormodel,
                                  media, resolution, spec,
				  sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &gamval, &density) == 2)
	cupsCMYKSetGamma(cmyk, 3, gamval, density);
    }
    else if ((attr = cupsFindAttr(ppd, "cupsMagentaLtDk", colormodel, media,
                                  resolution, spec, sizeof(spec))) != NULL)
    {
      if (sscanf(attr->value, "%f%f", &light, &dark) == 2)
	cupsCMYKSetLtDk(cmyk, 2, light, dark);
      else
	fprintf(stderr, "ERROR: Bad cupsMagentaLtDk value \"%s\"!\n",
        	attr->value);
    }
    else
      fprintf(stderr, "WARNING: No light magenta attribute found for %s!\n",
              spec);
  }

 /*
  * Return the new profile...
  */

  return (cmyk);
}


/*
 * 'cupsCMYKNew()' - Create a new CMYK color separation.
 */

cups_cmyk_t *				/* O - New CMYK separation or NULL */
cupsCMYKNew(int num_channels)		/* I - Number of color components */
{
  cups_cmyk_t	*cmyk;			/* New color separation */
  int		i;			/* Looping var */


 /*
  * Range-check the input...
  */

  if (num_channels < 1)
    return (NULL);

 /*
  * Allocate memory for the separation...
  */

  if ((cmyk = calloc(1, sizeof(cups_cmyk_t))) == NULL)
    return (NULL);

 /*
  * Allocate memory for the LUTs...
  */

  cmyk->num_channels = num_channels;

  if ((cmyk->channels[0] = calloc(num_channels * 256, sizeof(short))) == NULL)
  {
    free(cmyk);
    return (NULL);
  }

  for (i = 1; i < num_channels; i ++)
    cmyk->channels[i] = cmyk->channels[0] + i * 256;

 /*
  * Fill in the LUTs with unity transitions...
  */

  for (i = 0; i < 256; i ++)
    cmyk->black_lut[i] = i;

  switch (num_channels)
  {
    case 1 : /* K */
    case 2 : /* Kk */
	for (i = 0; i < 256; i ++)
	{
	  cmyk->channels[0][i] = CUPS_MAX_LUT * i / 255;
	}
	break;
    case 3 : /* CMY */
	for (i = 0; i < 256; i ++)
	{
	  cmyk->channels[0][i] = CUPS_MAX_LUT * i / 255;
	  cmyk->channels[1][i] = CUPS_MAX_LUT * i / 255;
	  cmyk->channels[2][i] = CUPS_MAX_LUT * i / 255;
	}
	break;
    case 4 : /* CMYK */
	for (i = 0; i < 256; i ++)
	{
	  cmyk->channels[0][i] = CUPS_MAX_LUT * i / 255;
	  cmyk->channels[1][i] = CUPS_MAX_LUT * i / 255;
	  cmyk->channels[2][i] = CUPS_MAX_LUT * i / 255;
	  cmyk->channels[3][i] = CUPS_MAX_LUT * i / 255;
	}
	break;
    case 6 : /* CcMmYK */
    case 7 : /* CcMmYKk */
	for (i = 0; i < 256; i ++)
	{
	  cmyk->channels[0][i] = CUPS_MAX_LUT * i / 255;
	  cmyk->channels[2][i] = CUPS_MAX_LUT * i / 255;
	  cmyk->channels[4][i] = CUPS_MAX_LUT * i / 255;
	  cmyk->channels[5][i] = CUPS_MAX_LUT * i / 255;
	}
	break;
  }

 /*
  * Return the separation...
  */

  return (cmyk);
}


/*
 * 'cupsCMYKSetBlack()' - Set the transition range for CMY to black.
 */

void
cupsCMYKSetBlack(cups_cmyk_t *cmyk,	/* I - CMYK color separation */
		 float       lower,	/* I - No black ink */
		 float       upper)	/* I - Only black ink */
{
  int	i,				/* Looping var */
	delta,				/* Difference between lower and upper */
	ilower,				/* Lower level from 0 to 255 */
	iupper;				/* Upper level from 0 to 255 */


 /*
  * Range check input...
  */

  if (cmyk == NULL || lower < 0.0 || lower > 1.0 || upper < 0.0 || upper > 1.0 ||
      lower > upper)
    return;

 /*
  * Convert lower and upper to integers from 0 to 255...
  */

  ilower  = (int)(255.0 * lower + 0.5);
  iupper  = (int)(255.0 * upper + 0.5);
  delta   = iupper - ilower;

 /*
  * Generate the CMY-only data...
  */

  for (i = 0; i < ilower; i ++)
  {
    cmyk->black_lut[i] = 0;
    cmyk->color_lut[i] = i;
  }

 /*
  * Then the transition data...
  */

  for (; i < iupper; i ++)
  {
    cmyk->black_lut[i] = iupper * (i - ilower) / delta;
    cmyk->color_lut[i] = ilower - ilower * (i - ilower) / delta;
  }

 /*
  * Then the K-only data...
  */

  for (; i < 256; i ++)
  {
    cmyk->black_lut[i] = i;
    cmyk->color_lut[i] = 0;
  }

  fprintf(stderr, "DEBUG: cupsCMYKSetBlack(cmyk, lower=%.3f, upper=%.3f)\n", lower, upper);

  for (i = 0; i < 256; i += 17)
    fprintf(stderr, "DEBUG:    %3d = %3dk + %3dc\n", i,
            cmyk->black_lut[i], cmyk->color_lut[i]);
}


/*
 * 'cupsCMYKSetCurve()' - Set a color transform curve using points.
 */

void
cupsCMYKSetCurve(cups_cmyk_t *cmyk,	/* I - CMYK color separation */
                 int         channel,	/* I - Color channel */
		 int         num_xypoints,
					/* I - Number of X,Y points */
		 const float *xypoints)	/* I - X,Y points */
{
  int	i;				/* Looping var */
  int	xstart;				/* Start position */
  int	xend;				/* End position */
  int	xdelta;				/* Difference in position */
  int	ystart;				/* Start value */
  int	yend;				/* End value */
  int	ydelta;				/* Difference in value */


 /*
  * Range check input...
  */

  if (cmyk == NULL || channel < 0 || channel >= cmyk->num_channels ||
      num_xypoints < 1 || xypoints == NULL)
    return;

 /*
  * Initialize the lookup table for the specified channel...
  */

  for (xstart = xend = 0, ystart = yend = 0;
       num_xypoints > 0;
       num_xypoints --, xypoints += 2, xstart = xend, ystart = yend)
  {
    xend   = (int)(255.0 * xypoints[1] + 0.5);
    yend   = (int)(CUPS_MAX_LUT * xypoints[0] + 0.5);
    xdelta = xend - xstart;
    ydelta = yend - ystart;

    for (i = xstart; i < xend; i ++)
      cmyk->channels[channel][i] = ystart + ydelta * (i - xstart) / xdelta;
  }

 /*
  * Initialize any trailing values to the maximum of the last data point...
  */

  for (i = xend; i < 256; i ++)
    cmyk->channels[channel][i] = yend;

  fprintf(stderr, "DEBUG: cupsCMYKSetXY(cmyk, channel=%d, num_xypoints=%d, "
                  "xypoints=[%.3f %.3f %.3f %.3f ...])\n", channel,
          num_xypoints, xypoints[0], xypoints[1], xypoints[2], xypoints[3]);

  for (i = 0; i < 256; i += 17)
    fprintf(stderr, "DEBUG:     %3d = %4d\n", i,
            cmyk->channels[channel + 0][i]);
}


/*
 * 'cupsCMYKSetGamma()' - Set a color transform curve using gamma and density.
 */

void
cupsCMYKSetGamma(cups_cmyk_t *cmyk,	/* I - CMYK color separation */
                 int         channel,	/* I - Ink channel */
                 float       gamval,	/* I - Gamma correction */
		 float       density)	/* I - Maximum density */
{
  int	i;				/* Looping var */


 /*
  * Range check input...
  */

  if (cmyk == NULL || channel < 0 || channel >= cmyk->num_channels ||
      gamval <= 0.0 || density <= 0.0 || density > 1.0)
    return;

 /*
  * Initialize the lookup table for the specified channel...
  */

  for (i = 0; i < 256; i ++)
    cmyk->channels[channel][i] = (int)(density * CUPS_MAX_LUT *
                                       pow((float)i / 255.0, gamval) + 0.5);

  fprintf(stderr, "DEBUG: cupsCMYKSetGamma(cmyk, channel=%d, gamval=%.3f, "
                  "density=%.3f)\n", channel, gamval, density);

  for (i = 0; i < 256; i += 17)
    fprintf(stderr, "DEBUG:     %3d = %4d\n", i,
            cmyk->channels[channel + 0][i]);
}


/*
 * 'cupsCMYKSetInkLimit()' - Set the limit on the amount of ink.
 */

void
cupsCMYKSetInkLimit(cups_cmyk_t *cmyk,	/* I - CMYK color separation */
                    float       limit)	/* I - Limit of ink */
{
  if (!cmyk || limit < 0.0)
    return;

  cmyk->ink_limit = limit * CUPS_MAX_LUT;
}


/*
 * 'cupsCMYKSetLtDk()' - Set light/dark ink transforms.
 */

void
cupsCMYKSetLtDk(cups_cmyk_t *cmyk,	/* I - CMYK color separation */
                int         channel,	/* I - Dark ink channel (+1 for light) */
		float       light,	/* I - Light ink only level */
		float       dark)	/* I - Dark ink only level */
{
  int	i,				/* Looping var */
	delta,				/* Difference between lower and upper */
	ilight,				/* Light level from 0 to 255 */
	idark;				/* Dark level from 0 to 255 */
  short	lut[256];			/* Original LUT data */


 /*
  * Range check input...
  */

  if (cmyk == NULL || light < 0.0 || light > 1.0 || dark < 0.0 || dark > 1.0 ||
      light > dark || channel < 0 || channel > (cmyk->num_channels - 2))
    return;

 /*
  * Convert lower and upper to integers from 0 to 255...
  */

  ilight = (int)(255.0 * light + 0.5);
  idark  = (int)(255.0 * dark + 0.5);
  delta  = idark - ilight;

 /*
  * Copy the dark ink LUT...
  */

  memcpy(lut, cmyk->channels[channel], sizeof(lut));

 /*
  * Generate the light-only data...
  */

  for (i = 0; i < ilight; i ++)
  {
    cmyk->channels[channel + 0][i] = 0;
    cmyk->channels[channel + 1][i] = CUPS_MAX_LUT * i / ilight;
  }

 /*
  * Then the transition data...
  */

  for (; i < idark; i ++)
  {
    cmyk->channels[channel + 0][i] = CUPS_MAX_LUT * idark * (i - ilight) /
                                     delta / 255;
    cmyk->channels[channel + 1][i] = CUPS_MAX_LUT - CUPS_MAX_LUT *
                                     (i - ilight) / delta;
  }

 /*
  * Then the K-only data...
  */

  for (; i < 256; i ++)
  {
    cmyk->channels[channel + 0][i] = CUPS_MAX_LUT * i / 255;
    cmyk->channels[channel + 1][i] = 0;
  }

  fprintf(stderr, "DEBUG: cupsCMYKSetLtDk(cmyk, channel=%d, light=%.3f, "
                  "dark=%.3f)\n", channel, light, dark);

  for (i = 0; i < 256; i += 17)
    fprintf(stderr, "DEBUG:     %3d = %4dlt + %4ddk\n", i,
            cmyk->channels[channel + 0][i], cmyk->channels[channel + 1][i]);
}


/*
 * End of "$Id: cmyk.c 861 2008-07-15 01:33:27Z msweet $".
 */