<atomic> design

The <atomic> header is one of the most closely coupled headers to the compiler. Ideally when you invoke any function from <atomic>, it should result in highly optimized assembly being inserted directly into your application ... assembly that is not otherwise representable by higher level C or C++ expressions. The design of the libc++ <atomic> header started with this goal in mind. A secondary, but still very important goal is that the compiler should have to do minimal work to faciliate the implementaiton of <atomic>. Without this second goal, then practically speaking, the libc++ <atomic> header would be doomed to be a barely supported, second class citizen on almost every platform.

Goals:

The purpose of this document is to inform compiler writers what they need to do to enable a high performance libc++ <atomic> with minimal effort.

The minimal work that must be done for a conforming <atomic>

The only "atomic" operations that must actually be lock free in <atomic> are represented by the following compiler intrinsics:

__atomic_flag__
__atomic_exchange_seq_cst(__atomic_flag__ volatile* obj, __atomic_flag__ desr)
{
    unique_lock<mutex> _(some_mutex);
    __atomic_flag__ result = *obj;
    *obj = desr;
    return result;
}

void
__atomic_store_seq_cst(__atomic_flag__ volatile* obj, __atomic_flag__ desr)
{
    unique_lock<mutex> _(some_mutex);
    *obj = desr;
}

Where:

That's it! Compiler writers do the above and you've got a fully conforming (though sub-par performance) <atomic> header!

Recommended work for a higher performance <atomic>

It would be good if the above intrinsics worked with all integral types plus void*. Because this may not be possible to do in a lock-free manner for all integral types on all platforms, a compiler must communicate each type that an intrinsic works with. For example if __atomic_exchange_seq_cst works for all types except for long long and unsigned long long then:

__has_feature(__atomic_exchange_seq_cst_b) == 1  // bool
__has_feature(__atomic_exchange_seq_cst_c) == 1  // char
__has_feature(__atomic_exchange_seq_cst_a) == 1  // signed char
__has_feature(__atomic_exchange_seq_cst_h) == 1  // unsigned char
__has_feature(__atomic_exchange_seq_cst_Ds) == 1 // char16_t
__has_feature(__atomic_exchange_seq_cst_Di) == 1 // char32_t
__has_feature(__atomic_exchange_seq_cst_w) == 1  // wchar_t
__has_feature(__atomic_exchange_seq_cst_s) == 1  // short
__has_feature(__atomic_exchange_seq_cst_t) == 1  // unsigned short
__has_feature(__atomic_exchange_seq_cst_i) == 1  // int
__has_feature(__atomic_exchange_seq_cst_j) == 1  // unsigned int
__has_feature(__atomic_exchange_seq_cst_l) == 1  // long
__has_feature(__atomic_exchange_seq_cst_m) == 1  // unsigned long
__has_feature(__atomic_exchange_seq_cst_Pv) == 1 // void*

Note that only the __has_feature flag is decorated with the argument type. The name of the compiler intrinsic is not decorated, but instead works like a C++ overloaded function.

Additionally there are other intrinsics besides __atomic_exchange_seq_cst and __atomic_store_seq_cst. They are optional. But if the compiler can generate faster code than provided by the library, then clients will benefit from the compiler writer's expertise and knowledge of the targeted platform.

Below is the complete list of sequentially consistent intrinsics, and their library implementations. Template syntax is used to indicate the desired overloading for integral and void* types. The template does not represent a requirement that the intrinsic operate on any type!

T is one of:  bool, char, signed char, unsigned char, short, unsigned short,
              int, unsigned int, long, unsigned long,
              long long, unsigned long long, char16_t, char32_t, wchar_t, void*

template <class T>
T
__atomic_load_seq_cst(T const volatile* obj)
{
    unique_lock<mutex> _(some_mutex);
    return *obj;
}

template <class T>
void
__atomic_store_seq_cst(T volatile* obj, T desr)
{
    unique_lock<mutex> _(some_mutex);
    *obj = desr;
}

template <class T>
T
__atomic_exchange_seq_cst(T volatile* obj, T desr)
{
    unique_lock<mutex> _(some_mutex);
    T r = *obj;
    *obj = desr;
    return r;
}

template <class T>
bool
__atomic_compare_exchange_strong_seq_cst_seq_cst(T volatile* obj, T* exp, T desr)
{
    unique_lock<mutex> _(some_mutex);
    if (std::memcmp(const_cast<T*>(obj), exp, sizeof(T)) == 0)
    {
        std::memcpy(const_cast<T*>(obj), &desr, sizeof(T));
        return true;
    }
    std::memcpy(exp, const_cast<T*>(obj), sizeof(T));
    return false;
}

template <class T>
bool
__atomic_compare_exchange_weak_seq_cst_seq_cst(T volatile* obj, T* exp, T desr)
{
    unique_lock<mutex> _(some_mutex);
    if (std::memcmp(const_cast<T*>(obj), exp, sizeof(T)) == 0)
    {
        std::memcpy(const_cast<T*>(obj), &desr, sizeof(T));
        return true;
    }
    std::memcpy(exp, const_cast<T*>(obj), sizeof(T));
    return false;
}

T is one of:  char, signed char, unsigned char, short, unsigned short,
              int, unsigned int, long, unsigned long,
              long long, unsigned long long, char16_t, char32_t, wchar_t

template <class T>
T
__atomic_fetch_add_seq_cst(T volatile* obj, T operand)
{
    unique_lock<mutex> _(some_mutex);
    T r = *obj;
    *obj += operand;
    return r;
}

template <class T>
T
__atomic_fetch_sub_seq_cst(T volatile* obj, T operand)
{
    unique_lock<mutex> _(some_mutex);
    T r = *obj;
    *obj -= operand;
    return r;
}

template <class T>
T
__atomic_fetch_and_seq_cst(T volatile* obj, T operand)
{
    unique_lock<mutex> _(some_mutex);
    T r = *obj;
    *obj &= operand;
    return r;
}

template <class T>
T
__atomic_fetch_or_seq_cst(T volatile* obj, T operand)
{
    unique_lock<mutex> _(some_mutex);
    T r = *obj;
    *obj |= operand;
    return r;
}

template <class T>
T
__atomic_fetch_xor_seq_cst(T volatile* obj, T operand)
{
    unique_lock<mutex> _(some_mutex);
    T r = *obj;
    *obj ^= operand;
    return r;
}

void*
__atomic_fetch_add_seq_cst(void* volatile* obj, ptrdiff_t operand)
{
    unique_lock<mutex> _(some_mutex);
    void* r = *obj;
    (char*&)(*obj) += operand;
    return r;
}

void*
__atomic_fetch_sub_seq_cst(void* volatile* obj, ptrdiff_t operand)
{
    unique_lock<mutex> _(some_mutex);
    void* r = *obj;
    (char*&)(*obj) -= operand;
    return r;
}

void __atomic_thread_fence_seq_cst()
{
    unique_lock<mutex> _(some_mutex);
}

void __atomic_signal_fence_seq_cst()
{
    unique_lock<mutex> _(some_mutex);
}

One should consult the (currently draft) C++ standard for the details of the definitions for these operations. For example __atomic_compare_exchange_weak_seq_cst_seq_cst is allowed to fail spuriously while __atomic_compare_exchange_strong_seq_cst_seq_cst is not.

If on your platform the lock-free definition of __atomic_compare_exchange_weak_seq_cst_seq_cst would be the same as __atomic_compare_exchange_strong_seq_cst_seq_cst, you may omit the __atomic_compare_exchange_weak_seq_cst_seq_cst intrinsic without a performance cost. The library will prefer your implementation of __atomic_compare_exchange_strong_seq_cst_seq_cst over its own definition for implementing __atomic_compare_exchange_weak_seq_cst_seq_cst. That is, the library will arrange for __atomic_compare_exchange_weak_seq_cst_seq_cst to call __atomic_compare_exchange_strong_seq_cst_seq_cst if you supply an intrinsic for the strong version but not the weak.

Taking advantage of weaker memory synchronization

So far all of the intrinsics presented require a sequentially consistent memory ordering. That is, no loads or stores can move across the operation (just as if the library had locked that internal mutex). But <atomic> supports weaker memory ordering operations. In all, there are six memory orderings (listed here from strongest to weakest):

memory_order_seq_cst
memory_order_acq_rel
memory_order_release
memory_order_acquire
memory_order_consume
memory_order_relaxed

(See the C++ standard for the detailed definitions of each of these orderings).

On some platforms, the compiler vendor can offer some or even all of the above intrinsics at one or more weaker levels of memory synchronization. This might lead for example to not issuing an mfence instruction on the x86.

If the compiler does not offer any given operation, at any given memory ordering level, the library will automatically attempt to call the next highest memory ordering operation. This continues up to seq_cst, and if that doesn't exist, then the library takes over and does the job with a mutex. This is a compile-time search & selection operation. At run time, the application will only see the few inlined assembly instructions for the selected intrinsic.

Each intrinsic is appended with the 7-letter name of the memory ordering it addresses. For example a load with relaxed ordering is defined by:

T __atomic_load_relaxed(const volatile T* obj);

And announced with:

__has_feature(__atomic_load_relaxed_b) == 1  // bool
__has_feature(__atomic_load_relaxed_c) == 1  // char
__has_feature(__atomic_load_relaxed_a) == 1  // signed char
...

The __atomic_compare_exchange_strong(weak) intrinsics are parameterized on two memory orderings. The first ordering applies when the operation returns true and the second ordering applies when the operation returns false.

Not every memory ordering is appropriate for every operation. exchange and the fetch_op operations support all 6. But load only supports relaxed, consume, acquire and seq_cst. store only supports relaxed, release, and seq_cst. The compare_exchange operations support the following 16 combinations out of the possible 36:

relaxed_relaxed
consume_relaxed
consume_consume
acquire_relaxed
acquire_consume
acquire_acquire
release_relaxed
release_consume
release_acquire
acq_rel_relaxed
acq_rel_consume
acq_rel_acquire
seq_cst_relaxed
seq_cst_consume
seq_cst_acquire
seq_cst_seq_cst

Again, the compiler supplies intrinsics only for the strongest orderings where it can make a difference. The library takes care of calling the weakest supplied intrinsic that is as strong or stronger than the customer asked for.