drac9210.c   [plain text]

/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/nsc/panel/drac9210.c,v 1.2 2003/01/14 09:34:35 alanh Exp $ */
/*
 * $Workfile: drac9210.c $
 * $Revision: 1.1.1.1 $
 *
 * File Contents: This file contains the panel library files to the 
 *                platforms with 9210, and 9211 support.
 *
 * SubModule:     Geode FlatPanel library
 *
 */

/* 
 * NSC_LIC_ALTERNATIVE_PREAMBLE
 *
 * Revision 1.0
 *
 * National Semiconductor Alternative GPL-BSD License
 *
 * National Semiconductor Corporation licenses this software 
 * ("Software"):
 *
 * Panel Library
 *
 * under one of the two following licenses, depending on how the 
 * Software is received by the Licensee.
 * 
 * If this Software is received as part of the Linux Framebuffer or
 * other GPL licensed software, then the GPL license designated 
 * NSC_LIC_GPL applies to this Software; in all other circumstances 
 * then the BSD-style license designated NSC_LIC_BSD shall apply.
 *
 * END_NSC_LIC_ALTERNATIVE_PREAMBLE */

/* NSC_LIC_BSD
 *
 * National Semiconductor Corporation Open Source License for 
 *
 * Panel Library
 *
 * (BSD License with Export Notice)
 *
 * Copyright (c) 1999-2001
 * National Semiconductor Corporation.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without 
 * modification, are permitted provided that the following conditions 
 * are met: 
 *
 *   * Redistributions of source code must retain the above copyright 
 *     notice, this list of conditions and the following disclaimer. 
 *
 *   * Redistributions in binary form must reproduce the above 
 *     copyright notice, this list of conditions and the following 
 *     disclaimer in the documentation and/or other materials provided 
 *     with the distribution. 
 *
 *   * Neither the name of the National Semiconductor Corporation nor 
 *     the names of its contributors may be used to endorse or promote 
 *     products derived from this software without specific prior 
 *     written permission. 
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
 * NATIONAL SEMICONDUCTOR CORPORATION OR CONTRIBUTORS BE LIABLE FOR ANY 
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE 
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 
 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE,
 * INTELLECTUAL PROPERTY INFRINGEMENT, OR OTHERWISE) ARISING IN ANY WAY 
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
 * OF SUCH DAMAGE.
 *
 * EXPORT LAWS: THIS LICENSE ADDS NO RESTRICTIONS TO THE EXPORT LAWS OF 
 * YOUR JURISDICTION. It is licensee's responsibility to comply with 
 * any export regulations applicable in licensee's jurisdiction. Under 
 * CURRENT (2001) U.S. export regulations this software 
 * is eligible for export from the U.S. and can be downloaded by or 
 * otherwise exported or reexported worldwide EXCEPT to U.S. embargoed 
 * destinations which include Cuba, Iraq, Libya, North Korea, Iran, 
 * Syria, Sudan, Afghanistan and any other country to which the U.S. 
 * has embargoed goods and services. 
 *
 * END_NSC_LIC_BSD */

/* NSC_LIC_GPL
 *
 * National Semiconductor Corporation Gnu General Public License for 
 *
 * Panel Library
 *
 * (GPL License with Export Notice)
 *
 * Copyright (c) 1999-2001
 * National Semiconductor Corporation.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without 
 * modification, are permitted under the terms of the GNU General 
 * Public License as published by the Free Software Foundation; either 
 * version 2 of the License, or (at your option) any later version  
 *
 * In addition to the terms of the GNU General Public License, neither 
 * the name of the National Semiconductor Corporation nor the names of 
 * its contributors may be used to endorse or promote products derived 
 * from this software without specific prior written permission. 
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
 * NATIONAL SEMICONDUCTOR CORPORATION OR CONTRIBUTORS BE LIABLE FOR ANY 
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE 
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 
 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE, 
 * INTELLECTUAL PROPERTY INFRINGEMENT, OR OTHERWISE) ARISING IN ANY WAY 
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
 * OF SUCH DAMAGE. See the GNU General Public License for more details. 
 *
 * EXPORT LAWS: THIS LICENSE ADDS NO RESTRICTIONS TO THE EXPORT LAWS OF 
 * YOUR JURISDICTION. It is licensee's responsibility to comply with 
 * any export regulations applicable in licensee's jurisdiction. Under 
 * CURRENT (2001) U.S. export regulations this software 
 * is eligible for export from the U.S. and can be downloaded by or 
 * otherwise exported or reexported worldwide EXCEPT to U.S. embargoed 
 * destinations which include Cuba, Iraq, Libya, North Korea, Iran, 
 * Syria, Sudan, Afghanistan and any other country to which the U.S. 
 * has embargoed goods and services. 
 *
 * You should have received a copy of the GNU General Public License 
 * along with this file; if not, write to the Free Software Foundation, 
 * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 
 *
 * END_NSC_LIC_GPL */

#include "drac9210.h"

#define	CS9210			0x40	/* Chip select pin */

/* 9210 on Draco */
#define CLOCK9210		0x04	/* Clock pin */
#define	DATAIN9210		0x20	/* Data from 9210 */
#define	DATAOUT9210		0x80	/* Data to 9210 */

static void DracoWriteData(unsigned char data);
static void DracoReadData(unsigned char *data);
static void Draco9210GpioInit();
static void Draco9210SetCS(void);
static unsigned char Draco9210ReadReg(unsigned char index);
static void Draco9210WriteReg(unsigned char index, unsigned char data);
static void Draco9210ClearCS(void);
static void Draco9210SetDataOut(void);
static void Draco9210ClearDataOut(void);
static unsigned char Draco9210ReadDataIn(void);
static void Draco9210ToggleClock(void);

void
Draco9210Init(Pnl_PanelStat * pstat)
{
   unsigned char panelvalues[] = {
      0x2, 0x80,
      0x2, 0x24,
      0x03, 0x00,
      0xc0, 0x00,
      0xc1, 0x00,
      0xc2, 0x00,
      0xc3, 0x00,
      0xc4, 0x00,
      0xc5, 0x01,
      0xc6, 0xff,
      0xc7, 0xff,
      0xc8, 0x3,
      0xc9, 0xfe,
      0xca, 0x0,
      0xcb, 0x3f,
      0xcc, 0xc,
      0xcd, 0x1,
      0xce, 0xff,
      0xcf, 0xc1,
      0xd0, 0x0,
      0xd1, 0x7e,
      0xd2, 0x3,
      0xd3, 0xfe,
      0xd4, 0x3,
      0xd5, 0x81,
      0xd6, 0xfc,
      0xd7, 0x3f,
      0xd8, 0x14,
      0xd9, 0x1e,
      0xda, 0x0f,
      0xdb, 0xc7,
      0xdc, 0x29,
      0xdd, 0xe1,
      0xde, 0xf1,
      0xdf, 0xf9,
      0xe0, 0x2,
      0xe1, 0xe,
      0xe2, 0x1e,
      0xe3, 0x3e,
      0xe4, 0x04,
      0xe5, 0x71,
      0xe6, 0xe3,
      0xe7, 0xcf,
      0xe8, 0x1,
      0xe9, 0x86,
      0xea, 0x3c,
      0xeb, 0xf3,
      0xec, 0xa,
      0xed, 0x39,
      0xee, 0xc7,
      0xef, 0x3d,

      0xf0, 0x14,
      0xf1, 0xc6,
      0xf2, 0x39,
      0xf3, 0xce,
      0xf4, 0x3,
      0xf5, 0x19,
      0xf6, 0xce,
      0xf7, 0x77,
      0xf8, 0x0,
      0xf9, 0x66,
      0xfa, 0x33,
      0xfb, 0xbb,
      0xfc, 0x2d,
      0xfd, 0x99,
      0xfe, 0xdd,
      0xff, 0xdd,

      0x3, 0x1,
      0xc0, 0x2,
      0xc1, 0x22,
      0xc2, 0x66,
      0xc3, 0x66,
      0xc4, 0x0,
      0xc5, 0xcd,
      0xc6, 0x99,
      0xc7, 0xbb,
      0xc8, 0x5,
      0xc9, 0x32,
      0xca, 0x66,
      0xcb, 0xdd,
      0xcc, 0x1a,
      0xcd, 0x4d,
      0xce, 0x9b,
      0xcf, 0x6f,
      0xd0, 0x0,
      0xd1, 0x92,
      0xd2, 0x6d,
      0xd3, 0xb6,
      0xd4, 0x5,
      0xd5, 0x25,
      0xd6, 0xb6,
      0xd7, 0xdb,
      0xd8, 0x2,
      0xd9, 0x5a,
      0xda, 0x4b,
      0xdb, 0x6d,
      0xdc, 0x29,
      0xdd, 0xa5,
      0xde, 0xb5,
      0xdf, 0xb7,
      0xe0, 0x4,
      0xe1, 0x4a,
      0xe2, 0x5a,
      0xe3, 0xda,
      0xe4, 0x12,
      0xe5, 0x95,
      0xe6, 0xad,
      0xe7, 0x6f,
      0xe8, 0x1,
      0xe9, 0x2a,
      0xea, 0x56,
      0xeb, 0xb5,
      0xec, 0xe,
      0xed, 0x55,
      0xee, 0xab,
      0xef, 0x5f,
      0xf0, 0x0,
      0xf1, 0xaa,
      0xf2, 0x55,
      0xf3, 0xea,
      0xf4, 0x1,
      0xf5, 0x55,
      0xf6, 0xaa,
      0xf7, 0xbf,
      0xf8, 0x6,
      0xf9, 0xaa,
      0xfa, 0x55,
      0xfb, 0x55,
      0xfc, 0x39,
      0xfd, 0x55,
      0xfe, 0xff,
      0xff, 0xff,

      0x3, 0x2,
      0xc0, 0x0,
      0xc1, 0x0,
      0xc2, 0xaa,
      0xc3, 0xaa,
      0xc4, 0x6,
      0xc5, 0xab,
      0xc6, 0x55,
      0xc7, 0x55,
      0xc8, 0x01,
      0xc9, 0x54,
      0xca, 0xaa,
      0xcb, 0xbf,
      0xcc, 0x8,
      0xcd, 0xab,
      0xce, 0x55,
      0xcf, 0xeb,
      0xd0, 0x6,
      0xd1, 0x54,
      0xd2, 0xab,
      0xd3, 0x5e,
      0xd4, 0x1,
      0xd5, 0x2b,
      0xd6, 0x56,
      0xd7, 0xb5,
      0xd8, 0x12,
      0xd9, 0x94,
      0xda, 0xad,
      0xdb, 0x6f,
      0xdc, 0x2d,
      0xdd, 0x4b,
      0xde, 0x5b,
      0xdf, 0xdb,
      0xe0, 0x0,
      0xe1, 0xa4,
      0xe2, 0xb4,
      0xe3, 0xb6,
      0xe4, 0x2,
      0xe5, 0x5b,
      0xe6, 0x4b,
      0xe7, 0x6d,
      0xe8, 0x5,
      0xe9, 0x24,
      0xea, 0xb6,
      0xeb, 0xdb,
      0xec, 0x8,
      0xed, 0x93,
      0xee, 0x6d,
      0xef, 0xb7,
      0xf0, 0x12,
      0xf1, 0x4c,
      0xf2, 0x9b,
      0xf3, 0x6e,
      0xf4, 0x5,
      0xf5, 0x33,
      0xf6, 0x66,
      0xf7, 0xdd,
      0xf8, 0x0,
      0xf9, 0xcc,
      0xfa, 0x99,
      0xfb, 0xbb,
      0xfc, 0x2b,
      0xfd, 0x33,
      0xfe, 0x77,
      0xff, 0x77,

      0x3, 0x3,
      0xc0, 0x4,
      0xc1, 0x88,
      0xc2, 0xcc,
      0xc3, 0xcc,
      0xc4, 0x0,
      0xc5, 0x67,
      0xc6, 0x33,
      0xc7, 0xbb,
      0xc8, 0x3,
      0xc9, 0x18,
      0xca, 0xce,
      0xcb, 0x77,
      0xcc, 0x1c,
      0xcd, 0xc7,
      0xce, 0x39,
      0xcf, 0xcf,

      0xd0, 0x2,
      0xd1, 0x38,
      0xd2, 0xc7,
      0xd3, 0x3c,
      0xd4, 0x1,
      0xd5, 0x87,
      0xd6, 0x3c,
      0xd7, 0xf3,
      0xd8, 0x4,
      0xd9, 0x70,
      0xda, 0xe3,
      0xdb, 0xcf,
      0xdc, 0x2b,
      0xdd, 0xf,
      0xde, 0x1f,
      0xdf, 0x3f,
      0xe0, 0x00,
      0xe1, 0xe0,
      0xe2, 0xf0,
      0xe3, 0xf8,
      0xe4, 0x14,
      0xe5, 0x1f,
      0xe6, 0xf,
      0xe7, 0xc7,
      0xe8, 0x3,
      0xe9, 0x80,
      0xea, 0xfc,
      0xeb, 0x3f,
      0xec, 0x8,
      0xed, 0x7f,
      0xee, 0x3,
      0xef, 0xff,
      0xf0, 0x4,
      0xf1, 0x0,
      0xf2, 0xff,
      0xf3, 0xc0,
      0xf4, 0x3,
      0xf5, 0xff,
      0xf6, 0x0,
      0xf7, 0x3f,
      0xf8, 0x0,
      0xf9, 0x0,
      0xfa, 0xff,
      0xfb, 0xff,
      0xfc, 0x3f,
      0xfd, 0xff,
      0xfe, 0xff,
      0xff, 0xff,
      0x3, 0x4,

      /* Setup the Diter to Pattern33 */
      0x80, 0xdd,
      0x81, 0xdd,
      0x82, 0x33,
      0x83, 0x33,
      0x84, 0xdd,
      0x85, 0xdd,
      0x86, 0x33,
      0x87, 0x33,
      0x88, 0x33,
      0x89, 0x33,
      0x8a, 0x77,
      0x8b, 0x77,
      0x8c, 0x33,
      0x8d, 0x33,
      0x8e, 0x77,
      0x8f, 0x77,
      0x90, 0xdd,
      0x91, 0xdd,
      0x92, 0x33,
      0x93, 0x33,
      0x94, 0xdd,
      0x95, 0xdd,
      0x96, 0x33,
      0x97, 0x33,
      0x98, 0x33,
      0x99, 0x33,
      0x9a, 0x77,
      0x9b, 0x77,
      0x9c, 0x33,
      0x9d, 0x33,
      0x9e, 0x77,
      0x9f, 0x77,

      0x4, 0x20,
      0x5, 0x3,
      0x6, 0x56,
      0x7, 0x2,
      0x8, 0x1c,
      0x9, 0x0,
      0xa, 0x26,
      0xb, 0x0,
      0xc, 0x15,
      0xd, 0x4,
      0xe, 0x50,
      0xf, 0x4,
      0x10, 0xfa,
      0x11, 0x0,
      0x12, 0xc8,
      0x13, 0x0,
      0x14, 0x31,
      0x15, 0x23,
      0x16, 0x0,

      /* Enable DSTN panel */
      0x2, 0x64
   };
   unsigned char index, data;
   int i;

   gfx_delay_milliseconds(100);
   Draco9210GpioInit();
   Draco9210SetCS();
   Draco9210ToggleClock();
   Draco9210ToggleClock();
   Draco9210ToggleClock();
   Draco9210ToggleClock();
   Draco9210ClearCS();

#if defined(_WIN32)			/* For Windows */
   for (i = 0; i < 10; i++) {
      _asm {
      out 0EDh, al}
   }

#elif defined(linux)			/* Linux */

#endif

   for (i = 0; i < 630; i += 2) {
      index = panelvalues[i];
      data = panelvalues[i + 1];
      Draco9210WriteReg(index, data);
   }

}

static void
DracoWriteData(unsigned char data)
{
   int i;
   unsigned char mask = 0x80, databit;

   for (i = 0; i < 8; i++) {

      databit = data & mask;
      if (data & mask) {
	 Draco9210SetDataOut();
      } else {
	 Draco9210ClearDataOut();
      }
      mask >>= 1;
      Draco9210ToggleClock();
   }
}

static void
DracoReadData(unsigned char *data)
{
   int i;
   unsigned char tmp = 0, readbit;

   Draco9210ClearDataOut();
   Draco9210ToggleClock();
   for (i = 0; i < 7; i++) {
      readbit = Draco9210ReadDataIn();
      tmp |= (readbit & 0x1);
      tmp <<= 1;
      Draco9210ToggleClock();
   }
   readbit = Draco9210ReadDataIn();
   tmp |= (readbit & 0x1);
   *data = tmp;
}

#if defined(_WIN32)			/* For Windows */

void
Draco9210GpioInit()
{
   _asm {
      pushf 
      cli
	  mov dx, 0CF8h
	  mov eax, CX55x0_ID + 090h
	  out dx, eax
	  mov dx, 0CFCh 
	  mov al, 0CFh 
	  mov ah, 00h 
	  out dx, ax 
	  popf
   }
}

void
Draco9210SetCS()
{
   _asm {
      pushf
      ;Point to PCI address register
      mov dx, 0CF8h
      ;55 XX GPIO data register 
      mov eax, CX55x0_ID + 090h
      out dx, eax
      ;Point to PCI data register (CFCh)
      mov dx, 0CFCh

      in ax, dx
      and ah, 30h
      mov ah, c92DataReg
      or ah, CS9210
      mov c92DataReg, ah
      out dx, ax
      popf
   }
}

void
Draco9210ClearCS()
{
   _asm {
      pushf
      ;Point to PCI address register
      mov dx, 0CF8h
      ;55 XX GPIO data register 
      mov eax, CX55x0_ID + 090h
      out dx, eax
      ;Point to PCI data register (CFCh)
      mov dx, 0CFCh
      ;Set CS LOW
      in ax, dx
      mov ah, c92DataReg
      and ah, NOT CS9210
      mov c92DataReg, ah
      out dx, ax
      popf
   }
}

void
Draco9210SetDataOut()
{
   _asm {
      pushf
      ;Point to PCI address register
      mov dx, 0CF8h
      ;55 XX GPIO data register 
      mov eax, CX55x0_ID + 090h
      out dx, eax
      ;Point to PCI data register (CFCh)
      mov dx, 0CFCh
      ;Set DATA HIGH
      in ax, dx
      mov ah, c92DataReg
      or ah, DATAOUT9210
      mov c92DataReg, ah
      out dx, ax
      popf
   }
}

void
Draco9210ClearDataOut()
{
   _asm {
      pushf
      ;Point to PCI address register
      mov dx, 0CF8h
      mov eax, CX55x0_ID + 090h;
      ;55 XX GPIO data register
      out dx, eax
      ;Point to PCI data register (CFCh)
      mov dx, 0CFCh
      ;Set Data LOW
      in ax, dx
      mov ah, c92DataReg
      and ah, NOT DATAOUT9210
      mov c92DataReg, ah
      out dx, ax
      popf
   }
}

unsigned char
Draco9210ReadDataIn()
{
   unsigned char readdata;

   _asm {
      pushf 
      ;Point to PCI address register 
      mov dx, 0CF8h
      ;55 XX GPIO data register 
      mov eax, CX55x0_ID + 090h
      out dx, eax 
      ;Point to PCI data register (CFCh)
      mov dx, 0FCh

      in ax, dx
      ;Preserve just Data IN bit
      and ah, DATAIN9210
      mov al, ah
      cmp al, 0
      ;Is it LOW ? 
      je readDataLow 
      ;must be HIGH
      mov al, 1
   readDataLow:
      mov readdata, al
      popf
   }
   return (readdata);
}

void
Draco9210ToggleClock()
{
   _asm {
      pushf
      ;Point to PCI address register
      mov dx, 0CF8h
      ;55 XX GPIO data register 
      mov eax, CX55x0_ID + 090h
      ;Point to PCI data register (CFCh)
      out dx, eax 
      mov dx, 0CFCh
      ;SET CLOCK 
      in ax, dx 
      mov ah, c92DataReg 
      or ah, CLOCK9210 
      mov c92DataReg, ah 
      out dx, ax 
      out 0EDh, al	/*      IOPAUSE */
      ;Point to PCI address register 
      mov dx, 0CF8h
      ;55 XX GPIO data register
      mov eax, CX55x0_ID + 090h
      out dx, eax
      ;Point to PCI data register (CFCh)
      mov dx, 0CFCh;
      ;CLEAR CLOCK
      in ax, dx
      mov ah, c92DataReg
      and ah, NOT CLOCK9210 
      mov c92DataReg, ah 
      out dx, ax 
      popf
   }
}

#elif defined(linux)			/* Linux */

void
Draco9210GpioInit()
{
}
void
Draco9210SetCS()
{
}
void
Draco9210ClearCS()
{
}
void
Draco9210SetDataOut()
{
}
void
Draco9210ClearDataOut()
{
}
unsigned char
Draco9210ReadDataIn()
{
}
void
Draco9210ToggleClock()
{
}

#endif

unsigned char
Draco9210ReadReg(unsigned char index)
{
   unsigned char data;

   Draco9210SetCS();
   Draco9210ToggleClock();
   Draco9210SetDataOut();
   Draco9210ToggleClock();
   Draco9210ClearDataOut();
   Draco9210ToggleClock();
   Draco9210ClearDataOut();
   Draco9210ToggleClock();
   Draco9210ClearDataOut();
   Draco9210ToggleClock();

   DracoWriteData(index);
   DracoReadData(&data);

   return (data);
}

void
Draco9210WriteReg(unsigned char index, unsigned char data)
{

   Draco9210SetCS();
   Draco9210ToggleClock();

   Draco9210SetDataOut();
   Draco9210ToggleClock();

   Draco9210ClearDataOut();
   Draco9210ToggleClock();

   Draco9210ClearDataOut();
   Draco9210ToggleClock();

   Draco9210SetDataOut();
   Draco9210ToggleClock();

   DracoWriteData(index);
   DracoWriteData(data);

   Draco9210ClearDataOut();
   Draco9210ToggleClock();

   Draco9210ClearCS();
   Draco9210ToggleClock();
   Draco9210ToggleClock();

}