XCOMM $XFree86: xc/programs/Xserver/hw/xfree86/XF98Conf.cpp,v 1.4 2004/02/13 23:58:34 dawes Exp $ XCOMM XCOMM Copyright (c) 1994-1998 by The XFree86 Project, Inc. XCOMM All rights reserved. XCOMM XCOMM Permission is hereby granted, free of charge, to any person obtaining XCOMM a copy of this software and associated documentation files (the XCOMM "Software"), to deal in the Software without restriction, including XCOMM without limitation the rights to use, copy, modify, merge, publish, XCOMM distribute, sublicense, and/or sell copies of the Software, and to XCOMM permit persons to whom the Software is furnished to do so, subject XCOMM to the following conditions: XCOMM XCOMM 1. Redistributions of source code must retain the above copyright XCOMM notice, this list of conditions, and the following disclaimer. XCOMM XCOMM 2. Redistributions in binary form must reproduce the above copyright XCOMM notice, this list of conditions and the following disclaimer XCOMM in the documentation and/or other materials provided with the XCOMM distribution, and in the same place and form as other copyright, XCOMM license and disclaimer information. XCOMM XCOMM 3. The end-user documentation included with the redistribution, XCOMM if any, must include the following acknowledgment: "This product XCOMM includes software developed by The XFree86 Project, Inc XCOMM (http://www.xfree86.org/) and its contributors", in the same XCOMM place and form as other third-party acknowledgments. Alternately, XCOMM this acknowledgment may appear in the software itself, in the XCOMM same form and location as other such third-party acknowledgments. XCOMM XCOMM 4. Except as contained in this notice, the name of The XFree86 XCOMM Project, Inc shall not be used in advertising or otherwise to XCOMM promote the sale, use or other dealings in this Software without XCOMM prior written authorization from The XFree86 Project, Inc. XCOMM XCOMM THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED XCOMM WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF XCOMM MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. XCOMM IN NO EVENT SHALL THE XFREE86 PROJECT, INC OR ITS CONTRIBUTORS BE XCOMM LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, XCOMM OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT XCOMM OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR XCOMM BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, XCOMM WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE XCOMM OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, XCOMM EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. XCOMM XCOMM $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $ XCOMM ********************************************************************** XCOMM This is a sample configuration file only, intended to illustrate XCOMM what a config file might look like. Refer to the XF86Config(4/5) XCOMM man page for details about the format of this file. This man page XCOMM is installed as MANPAGE XCOMM ********************************************************************** XCOMM The ordering of sections is not important in version 4.0 and later. XCOMM ********************************************************************** XCOMM Files section. This allows default font and rgb paths to be set XCOMM ********************************************************************** Section "Files" XCOMM The location of the RGB database. Note, this is the name of the XCOMM file minus the extension (like ".txt" or ".db"). There is normally XCOMM no need to change the default. RgbPath RGBPATH XCOMM Multiple FontPath entries are allowed (which are concatenated together), XCOMM as well as specifying multiple comma-separated entries in one FontPath XCOMM command (or a combination of both methods) FontPath LOCALFONTPATH FontPath MISCFONTPATH FontPath DPI75USFONTPATH FontPath DPI100USFONTPATH FontPath T1FONTPATH FontPath CIDFONTPATH FontPath SPFONTPATH FontPath DPI75FONTPATH FontPath DPI100FONTPATH XCOMM ModulePath can be used to set a search path for the X server modules. XCOMM The default path is shown here. XCOMM ModulePath MODULEPATH EndSection XCOMM ********************************************************************** XCOMM Module section -- this is an optional section which is used to specify XCOMM which run-time loadable modules to load when the X server starts up. XCOMM ********************************************************************** Section "Module" XCOMM This loads the PEX extension module. Load "pex5" XCOMM This loads the XIE extension module. Load "xie" XCOMM This loads the GLX extension module. Load "glx" XCOMM This loads the DBE extension module. Load "dbe" XCOMM This loads the RECORD extension module. Load "record" XCOMM This loads the miscellaneous extensions module, and disables XCOMM initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" EndSubSection XCOMM This loads the Type1, Speedo and FreeType font modules Load "type1" Load "speedo" Load "freetype" EndSection XCOMM ********************************************************************** XCOMM Server flags section. This contains various server-wide Options. XCOMM ********************************************************************** Section "ServerFlags" XCOMM Uncomment this to cause a core dump at the spot where a signal is XCOMM received. This may leave the console in an unusable state, but may XCOMM provide a better stack trace in the core dump to aid in debugging XCOMM Option "NoTrapSignals" XCOMM Uncomment this to disable the <Crtl><Alt><BS> server abort sequence XCOMM This allows clients to receive this key event. XCOMM Option "DontZap" XCOMM Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching XCOMM sequences. This allows clients to receive these key events. XCOMM Option "DontZoom" XCOMM Uncomment this to disable tuning with the xvidtune client. With XCOMM it the client can still run and fetch card and monitor attributes, XCOMM but it will not be allowed to change them. If it tries it will XCOMM receive a protocol error. XCOMM Option "DisableVidModeExtension" XCOMM Uncomment this to enable the use of a non-local xvidtune client. XCOMM Option "AllowNonLocalXvidtune" XCOMM Uncomment this to disable dynamically modifying the input device XCOMM (mouse and keyboard) settings. XCOMM Option "DisableModInDev" XCOMM Uncomment this to enable the use of a non-local client to XCOMM change the keyboard or mouse settings (currently only xset). XCOMM Option "AllowNonLocalModInDev" XCOMM Set the basic blanking screen saver timeout. Option "blank time" "10" # 10 minutes XCOMM Set the DPMS timeouts. These are set here because they are global XCOMM rather than screen-specific. These settings alone don't enable DPMS. XCOMM It is enabled per-screen (or per-monitor), and even then only when XCOMM the driver supports it. Option "standby time" "20" Option "suspend time" "30" Option "off time" "60" XCOMM Specify PC98 architecture XCOMM Option "PC98" EndSection XCOMM ********************************************************************** XCOMM Input devices XCOMM ********************************************************************** XCOMM ********************************************************************** XCOMM Core keyboard's InputDevice section XCOMM ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" XCOMM For most OSs the protocol can be omitted (it defaults to "Standard"). XCOMM When using XQUEUE (only for SVR3 and SVR4, but not Solaris), comment XCOMM out the above line, and uncomment the following line. XCOMM Option "Protocol" "Xqueue" XCOMM Set the keyboard auto repeat parameters. Not all platforms implement XCOMM this. Option "AutoRepeat" "500 5" XCOMM Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)). XCOMM Option "Xleds" "1 2 3" XCOMM To disable the XKEYBOARD extension, uncomment XkbDisable. XCOMM Option "XkbDisable" Option "XkbRules" "xfree86" Option "XkbModel" "pc98" Option "XkbLayout" "nec/jp" XCOMM Option "XkbVariant" "" XCOMM Option "XkbOptions" "" EndSection XCOMM ********************************************************************** XCOMM Core Pointer's InputDevice section XCOMM ********************************************************************** Section "InputDevice" XCOMM Identifier and driver Identifier "Mouse1" Driver "mouse" XCOMM The mouse protocol and device. The device is normally set to /dev/mouse, XCOMM which is usually a symbolic link to the real device. Option "Protocol" "BusMouse" XCOMM For FreeBSD(98)-2.X FREEBSDMOUSEDEV XCOMM For NetBSD/pc98 (based on NetBSD 1.1 or later) NETBSDNEWMOUSEDEV XCOMM For NetBSD/pc98 (based on NetBSD 1.0) NETBSDOLDMOUSEDEV XCOMM For Linux/98 LINUXMOUSEDEV XCOMM When using XQUEUE (only for SVR3 and SVR4, but not Solaris), use XCOMM the following instead of any of the lines above. The Device line XCOMM is not required in this case. XCOMM Option "Protocol" "Xqueue" XCOMM Baudrate and SampleRate are only for some older Logitech mice. In XCOMM almost every case these lines should be omitted. XCOMM Option "BaudRate" "9600" XCOMM Option "SampleRate" "150" XCOMM Emulate3Buttons is an option for 2-button mice XCOMM Emulate3Timeout is the timeout in milliseconds (default is 50ms) Option "Emulate3Buttons" XCOMM Option "Emulate3Timeout" "50" XCOMM ChordMiddle is an option for some 3-button Logitech mice, or any XCOMM 3-button mouse where the middle button generates left+right button XCOMM events. XCOMM Option "ChordMiddle" EndSection Section "InputDevice" Identifier "Mouse2" Driver "mouse" Option "Protocol" "MouseMan" Option "Device" "/dev/mouse2" EndSection XCOMM Some examples of extended input devices XCOMM Section "InputDevice" XCOMM Identifier "spaceball" XCOMM Driver "magellan" XCOMM Option "Device" "/dev/cua0" XCOMM EndSection XCOMM XCOMM Section "InputDevice" XCOMM Identifier "spaceball2" XCOMM Driver "spaceorb" XCOMM Option "Device" "/dev/cua0" XCOMM EndSection XCOMM XCOMM Section "InputDevice" XCOMM Identifier "touchscreen0" XCOMM Driver "microtouch" XCOMM Option "Device" "/dev/ttyS0" XCOMM Option "MinX" "1412" XCOMM Option "MaxX" "15184" XCOMM Option "MinY" "15372" XCOMM Option "MaxY" "1230" XCOMM Option "ScreenNumber" "0" XCOMM Option "ReportingMode" "Scaled" XCOMM Option "ButtonNumber" "1" XCOMM Option "SendCoreEvents" XCOMM EndSection XCOMM XCOMM Section "InputDevice" XCOMM Identifier "touchscreen1" XCOMM Driver "elo2300" XCOMM Option "Device" "/dev/ttyS0" XCOMM Option "MinX" "231" XCOMM Option "MaxX" "3868" XCOMM Option "MinY" "3858" XCOMM Option "MaxY" "272" XCOMM Option "ScreenNumber" "0" XCOMM Option "ReportingMode" "Scaled" XCOMM Option "ButtonThreshold" "17" XCOMM Option "ButtonNumber" "1" XCOMM Option "SendCoreEvents" XCOMM EndSection XCOMM ********************************************************************** XCOMM Monitor section XCOMM ********************************************************************** XCOMM Any number of monitor sections may be present Section "Monitor" XCOMM The identifier line must be present. Identifier "Generic Monitor" XCOMM The VendorName and ModelName lines are optional. VendorName "Unknown" ModelName "Unknown" XCOMM HorizSync is in kHz unless units are specified. XCOMM HorizSync may be a comma separated list of discrete values, or a XCOMM comma separated list of ranges of values. XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S XCOMM USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5 # typical for a single frequency fixed-sync monitor XCOMM HorizSync 30-64 # multisync XCOMM HorizSync 31.5, 35.2 # multiple fixed sync frequencies XCOMM HorizSync 15-25, 30-50 # multiple ranges of sync frequencies XCOMM VertRefresh is in Hz unless units are specified. XCOMM VertRefresh may be a comma separated list of discrete values, or a XCOMM comma separated list of ranges of values. XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S XCOMM USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 60 # typical for a single frequency fixed-sync monitor XCOMM VertRefresh 50-100 # multisync XCOMM VertRefresh 60, 65 # multiple fixed sync frequencies XCOMM VertRefresh 40-50, 80-100 # multiple ranges of sync frequencies XCOMM Modes can be specified in two formats. A compact one-line format, or XCOMM a multi-line format. XCOMM A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz) XCOMM These two are equivalent XCOMM ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525 Mode "640x480" DotClock 25.175 HTimings 640 664 760 800 VTimings 480 491 493 525 EndMode XCOMM These two are equivalent XCOMM ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace XCOMM Mode "1024x768i" XCOMM DotClock 45 XCOMM HTimings 1024 1048 1208 1264 XCOMM VTimings 768 776 784 817 XCOMM Flags "Interlace" XCOMM EndMode XCOMM If a monitor has DPMS support, that can be indicated here. This will XCOMM enable DPMS when the monitor is used with drivers that support it. XCOMM Option "dpms" XCOMM If a monitor requires that the sync signals be superimposed on the XCOMM green signal, the following option will enable this when used with XCOMM drivers that support it. Only a relatively small range of hardware XCOMM (and drivers) actually support this. XCOMM Option "sync on green" EndSection Section "Monitor" XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S XCOMM USER MANUAL FOR THE CORRECT NUMBERS. Identifier "Multi sync" VendorName "IDEK" ModelName "MF8615" HorizSync 24-70 VertRefresh 50-100 Mode "640x400" DotClock 28.322 HTimings 640 664 712 808 VTimings 400 400 402 417 EndMode Mode "640x480" DotClock 28.0 HTimings 640 690 752 800 VTimings 480 496 544 560 EndMode Mode "NEC480" DotClock 31.5 HTimings 640 664 760 800 VTimings 480 491 493 525 EndMode Mode "800x600" DotClock 36.00 HTimings 800 840 900 1000 VTimings 600 602 610 664 EndMode Mode "1024x768" DotClock 65.00 HTimings 1024 1188 1210 1370 VTimings 768 768 770 790 EndMode Mode "1024x768i" DotClock 45.00 HTimings 1024 1030 1230 1260 VTimings 768 768 790 830 Flags "Interlace" EndMode Mode "1024x768H" DotClock 75.00 HTimings 1024 1068 1184 1328 VTimings 768 771 777 806 EndMode Mode "1280x1024" DotClock 109.00 HTimings 1280 1290 1680 1696 VTimings 1024 1027 1030 1064 EndMode Mode "1280x1024H" DotClock 110.00 HTimings 1280 1300 1315 1700 VTimings 1024 1027 1030 1064 EndMode EndSection XCOMM ********************************************************************** XCOMM Graphics device section XCOMM ********************************************************************** XCOMM Any number of graphics device sections may be present Section "Device" Identifier "MGA" VendorName "Matrox" BoardName "Millennium" Driver "mga" XCOMM BusID "PCI:0:10:0" EndSection Section "Device" Identifier "NECTrident" VendorName "NEC" BoardName "NEC Trident" Driver "trident" XCOMM BusID "PCI:0:8:0" XCOMM Option "NoPciBurst" XCOMM Option "XaaNoScreenToScreenCopy" XCOMM Option "XaaNoCPUToScreenColorExpandFill" XCOMM Option "XaaNoScanlineCPUToScreenColorExpandFill" XCOMM Option "XaaNoScreenToScreenColorExpandFill" XCOMM VideoRam 2048 Endsection XCOMM ********************************************************************** XCOMM Screen sections. XCOMM ********************************************************************** XCOMM Any number of screen sections may be present. Each describes XCOMM the configuration of a single screen. A single specific screen section XCOMM may be specified from the X server command line with the "-screen" XCOMM option. Section "Screen" XCOMM The Identifier, Device and Monitor lines must be present Identifier "Screen 1" Device "MGA" Monitor "Multi sync" XCOMM The favoured Depth and/or Bpp may be specified here DefaultDepth 8 SubSection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection SubSection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection SubSection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" EndSubsection EndSection XCOMM ********************************************************************** XCOMM ServerLayout sections. XCOMM ********************************************************************** Section "ServerLayout" Identifier "simple layout" Screen "Screen 1" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection