.\" Copyright \(co 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1994, 1996 X Consortium
.\"
.\" Permission is hereby granted, free of charge, to any person obtaining
.\" a copy of this software and associated documentation files (the
.\" "Software"), to deal in the Software without restriction, including
.\" without limitation the rights to use, copy, modify, merge, publish,
.\" distribute, sublicense, and/or sell copies of the Software, and to
.\" permit persons to whom the Software is furnished to do so, subject to
.\" the following conditions:
.\"
.\" The above copyright notice and this permission notice shall be included
.\" in all copies or substantial portions of the Software.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
.\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
.\" IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR
.\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
.\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
.\" OTHER DEALINGS IN THE SOFTWARE.
.\"
.\" Except as contained in this notice, the name of the X Consortium shall
.\" not be used in advertising or otherwise to promote the sale, use or
.\" other dealings in this Software without prior written authorization
.\" from the X Consortium.
.\"
.\" Copyright \(co 1985, 1986, 1987, 1988, 1989, 1990, 1991 by
.\" Digital Equipment Corporation
.\"
.\" Portions Copyright \(co 1990, 1991 by
.\" Tektronix, Inc.
.\"
.\" Permission to use, copy, modify and distribute this documentation for
.\" any purpose and without fee is hereby granted, provided that the above
.\" copyright notice appears in all copies and that both that copyright notice
.\" and this permission notice appear in all copies, and that the names of
.\" Digital and Tektronix not be used in in advertising or publicity pertaining
.\" to this documentation without specific, written prior permission.
.\" Digital and Tektronix makes no representations about the suitability
.\" of this documentation for any purpose.
.\" It is provided ``as is'' without express or implied warranty.
.\"
\&
.sp 1
.ce 3
\s+1\fBAppendix C\fP\s-1
\s+1\fBExtensions\fP\s-1
.sp 2
.na
.LP
.XS
Appendix C: Extensions
.XE
Because X can evolve by extensions to the core protocol,
it is important that extensions not be perceived as second-class citizens.
At some point,
your favorite extensions may be adopted as additional parts of the
X Standard.
.LP
Therefore, there should be little to distinguish the use of an extension from
that of the core protocol.
To avoid having to initialize extensions explicitly in application programs,
it is also important that extensions perform lazy evaluations,
automatically initializing themselves when called for the first time.
.LP
This appendix describes techniques for writing extensions to Xlib that will
run at essentially the same performance as the core protocol requests.
.NT
It is expected that a given extension to X consists of multiple
requests.
Defining 10 new features as 10 separate extensions is a bad practice.
Rather, they should be packaged into a single extension
and should use minor opcodes to distinguish the requests.
.NE
.LP
The symbols and macros used for writing stubs to Xlib are listed in
.hN X11/Xlibint.h .
.SH
Basic Protocol Support Routines
.LP
The basic protocol requests for extensions are
.PN XQueryExtension
and
.PN XListExtensions .
.IN "XQueryExtension" "" "@DEF@"
.sM
.FD 0
Bool XQueryExtension(\^\fIdisplay\fP, \fIname\fP, \fImajor_opcode_return\fP, \
\fIfirst_event_return\fP, \fIfirst_error_return\fP\^)
.br
Display *\fIdisplay\fP\^;
.br
char *\fIname;\fP\^
.br
int *\fImajor_opcode_return\fP\^;
.br
int *\fIfirst_event_return\fP\^;
.br
int *\fIfirst_error_return\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIname\fP 1i
Specifies the extension name.
.IP \fImajor_opcode_return\fP 1i
Returns the major opcode.
.IP \fIfirst_event_return\fP 1i
Returns the first event code, if any.
.IP \fIfirst_error_return\fP 1i
Returns the first error code, if any.
.LP
.eM
The
.PN XQueryExtension
function determines if the named extension is present.
If the extension is not present,
.PN XQueryExtension
returns
.PN False ;
otherwise, it returns
.PN True .
If the extension is present,
.PN XQueryExtension
returns the major opcode for the extension to major_opcode_return;
otherwise,
it returns zero.
Any minor opcode and the request formats are specific to the
extension.
If the extension involves additional event types,
.PN XQueryExtension
returns the base event type code to first_event_return;
otherwise,
it returns zero.
The format of the events is specific to the extension.
If the extension involves additional error codes,
.PN XQueryExtension
returns the base error code to first_error_return;
otherwise,
it returns zero.
The format of additional data in the errors is specific to the extension.
.LP
If the extension name is not in the Host Portable Character Encoding
the result is implementation-dependent.
Uppercase and lowercase matter;
the strings ``thing'', ``Thing'', and ``thinG''
are all considered different names.
.IN "XListExtensions" "" "@DEF@"
.sM
.FD 0
char **XListExtensions(\^\fIdisplay\fP, \fInextensions_return\fP\^)
.br
Display *\fIdisplay\fP\^;
.br
int *\fInextensions_return\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fInextensions_return\fP 1i
Returns the number of extensions listed.
.LP
.eM
The
.PN XListExtensions
function returns a list of all extensions supported by the server.
If the data returned by the server is in the Latin Portable Character Encoding,
then the returned strings are in the Host Portable Character Encoding.
Otherwise, the result is implementation-dependent.
.IN "XFreeExtensionList" "" "@DEF@"
.sM
.FD 0
XFreeExtensionList(\^\fIlist\fP\^)
.br
char **\fIlist\fP\^;
.FN
.IP \fIlist\fP 1i
Specifies the list of extension names.
.LP
.eM
The
.PN XFreeExtensionList
function frees the memory allocated by
.PN XListExtensions .
.SH
Hooking into Xlib
.LP
These functions allow you to hook into the library.
They are not normally used by application programmers but are used
by people who need to extend the core X protocol and
the X library interface.
The functions, which generate protocol requests for X, are typically
called stubs.
.LP
In extensions, stubs first should check to see if they have initialized
themselves on a connection.
If they have not, they then should call
.PN XInitExtension
to attempt to initialize themselves on the connection.
.LP
If the extension needs to be informed of GC/font allocation or
deallocation or if the extension defines new event types,
the functions described here allow the extension to be
called when these events occur.
.LP
The
.PN XExtCodes
structure returns the information from
.PN XInitExtension
and is defined in
.hN X11/Xlib.h :
.LP
.IN "XExtCodes" "" "@DEF@"
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
typedef struct _XExtCodes { /* public to extension, cannot be changed */
int extension; /* extension number */
int major_opcode; /* major op-code assigned by server */
int first_event; /* first event number for the extension */
int first_error; /* first error number for the extension */
} XExtCodes;
.De
.LP
.eM
.IN "XInitExtension" "" "@DEF@"
.sM
.FD 0
XExtCodes *XInitExtension(\^\fIdisplay\fP, \fIname\fP\^)
.br
Display *\fIdisplay\fP\^;
.br
char *\fIname\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIname\fP 1i
Specifies the extension name.
.LP
.eM
The
.PN XInitExtension
function determines if the named extension exists.
Then, it allocates storage for maintaining the
information about the extension on the connection,
chains this onto the extension list for the connection,
and returns the information the stub implementor will need to access
the extension.
If the extension does not exist,
.PN XInitExtension
returns NULL.
.LP
If the extension name is not in the Host Portable Character Encoding,
the result is implementation-dependent.
Uppercase and lowercase matter;
the strings ``thing'', ``Thing'', and ``thinG''
are all considered different names.
.LP
The extension number in the
.PN XExtCodes
structure is
needed in the other calls that follow.
This extension number is unique only to a single connection.
.LP
.IN "XAddExtension" "" "@DEF@"
.sM
.FD 0
XExtCodes *XAddExtension\^(\^\fIdisplay\fP\^)
.br
Display *\fIdisplay\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.LP
.eM
For local Xlib extensions, the
.PN XAddExtension
function allocates the
.PN XExtCodes
structure, bumps the extension number count,
and chains the extension onto the extension list.
(This permits extensions to Xlib without requiring server extensions.)
.SH
Hooks into the Library
.LP
These functions allow you to define procedures that are to be
called when various circumstances occur.
The procedures include the creation of a new GC for a connection,
the copying of a GC, the freeing of a GC, the creating and freeing of fonts,
the conversion of events defined by extensions to and from wire
format, and the handling of errors.
.LP
All of these functions return the previous procedure defined for this
extension.
.IN "XESetCloseDisplay" "" "@DEF@"
.sM
.FD 0
int (*XESetCloseDisplay(\^\fIdisplay\fP, \fIextension\fP, \fIproc\fP\^))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIextension\fP\^;
.br
int (\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIextension\fP 1i
Specifies the extension number.
.IP \fIproc\fP 1i
Specifies the procedure to call when the display is closed.
.LP
.eM
The
.PN XESetCloseDisplay
function defines a procedure to be called whenever
.PN XCloseDisplay
is called.
It returns any previously defined procedure, usually NULL.
.LP
When
.PN XCloseDisplay
is called,
your procedure is called
with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
(*\fIproc\fP\^)(\^\fIdisplay\fP, \fIcodes\fP\^)
Display *\fIdisplay\fP\^;
XExtCodes *\fIcodes\fP\^;
.De
.LP
.eM
.IN "XESetCreateGC" "" "@DEF@"
.sM
.FD 0
int (*XESetCreateGC(\^\fIdisplay\fP, \fIextension\fP, \fIproc\fP\^))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIextension\fP\^;
.br
int (\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIextension\fP 1i
Specifies the extension number.
.IP \fIproc\fP 1i
Specifies the procedure to call when a GC is closed.
.LP
.eM
The
.PN XESetCreateGC
function defines a procedure to be called whenever
a new GC is created.
It returns any previously defined procedure, usually NULL.
.LP
When a GC is created,
your procedure is called with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
(*\fIproc\fP\^)(\^\fIdisplay\fP, \fIgc\fP, \fIcodes\fP\^)
Display *\fIdisplay\fP\^;
GC \fIgc\fP\^;
XExtCodes *\fIcodes\fP\^;
.De
.LP
.eM
.IN "XESetCopyGC" "" "@DEF@"
.sM
.FD 0
int (*XESetCopyGC(\^\fIdisplay\fP, \fIextension\fP, \fIproc\fP\^))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIextension\fP\^;
.br
int (\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIextension\fP 1i
Specifies the extension number.
.IP \fIproc\fP 1i
Specifies the procedure to call when GC components are copied.
.LP
.eM
The
.PN XESetCopyGC
function defines a procedure to be called whenever
a GC is copied.
It returns any previously defined procedure, usually NULL.
.LP
When a GC is copied,
your procedure is called with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
(*\fIproc\fP\^)(\^\fIdisplay\fP, \fIgc\fP, \fIcodes\fP\^)
Display *\fIdisplay\fP\^;
GC \fIgc\fP\^;
XExtCodes *\fIcodes\fP\^;
.De
.LP
.eM
.IN "XESetFreeGC" "" "@DEF@"
.sM
.FD 0
int (*XESetFreeGC(\^\fIdisplay\fP, \fIextension\fP, \fIproc)\fP\^)(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIextension\fP\^;
.br
int (\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIextension\fP 1i
Specifies the extension number.
.IP \fIproc\fP 1i
Specifies the procedure to call when a GC is freed.
.LP
.eM
The
.PN XESetFreeGC
function defines a procedure to be called whenever
a GC is freed.
It returns any previously defined procedure, usually NULL.
.LP
When a GC is freed,
your procedure is called with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
(*\fIproc\fP\^)(\^\fIdisplay\fP, \fIgc\fP, \fIcodes\fP\^)
Display *\fIdisplay\fP\^;
GC \fIgc\fP\^;
XExtCodes *\fIcodes\fP\^;
.De
.LP
.eM
.IN "XESetCreateFont" "" "@DEF@"
.sM
.FD 0
int (*XESetCreateFont(\^\fIdisplay\fP, \fIextension\fP, \fIproc\fP))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIextension\fP\^;
.br
int (\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIextension\fP 1i
Specifies the extension number.
.IP \fIproc\fP 1i
Specifies the procedure to call when a font is created.
.LP
.eM
The
.PN XESetCreateFont
function defines a procedure to be called whenever
.PN XLoadQueryFont
and
.PN XQueryFont
are called.
It returns any previously defined procedure, usually NULL.
.LP
When
.PN XLoadQueryFont
or
.PN XQueryFont
is called,
your procedure is called with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
(*\fIproc\fP\^)(\^\fIdisplay\fP, \fIfs\fP, \fIcodes\fP\^)
Display *\fIdisplay\fP\^;
XFontStruct *\fIfs\fP\^;
XExtCodes *\fIcodes\fP\^;
.De
.LP
.eM
.IN "XESetFreeFont" "" "@DEF@"
.sM
.FD 0
int (*XESetFreeFont(\^\fIdisplay\fP, \fIextension\fP, \fIproc\fP\^))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIextension\fP\^;
.br
int (\^*\fIproc\fP)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIextension\fP 1i
Specifies the extension number.
.IP \fIproc\fP 1i
Specifies the procedure to call when a font is freed.
.LP
.eM
The
.PN XESetFreeFont
function defines a procedure to be called whenever
.PN XFreeFont
is called.
It returns any previously defined procedure, usually NULL.
.LP
When
.PN XFreeFont
is called, your procedure is called with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
(*\fIproc\fP\^)(\^\fIdisplay\fP, \fIfs\fP, \fIcodes\fP\^)
Display *\fIdisplay\fP\^;
XFontStruct *\fIfs\fP\^;
XExtCodes *\fIcodes\fP\^;
.De
.LP
.eM
The
.PN XESetWireToEvent
and
.PN XESetEventToWire
functions allow you to define new events to the library.
An
.PN XEvent
structure always has a type code (type
.PN int )
as the first component.
This uniquely identifies what kind of event it is.
The second component is always the serial number (type
.PN unsigned
.PN long )
of the last request processed by the server.
The third component is always a Boolean (type
.PN Bool )
indicating whether the event came from a
.PN SendEvent
protocol request.
The fourth component is always a pointer to the display
the event was read from.
The fifth component is always a resource ID of one kind or another,
usually a window, carefully selected to be useful to toolkit dispatchers.
The fifth component should always exist, even if
the event does not have a natural destination;
if there is no value
from the protocol to put in this component, initialize it to zero.
.NT
There is an implementation limit such that your host event
structure size cannot be bigger than the size of the
.PN XEvent
union of structures.
There also is no way to guarantee that more than 24 elements or 96 characters
in the structure will be fully portable between machines.
.NE
.IN "XESetWireToEvent" "" "@DEF@"
.sM
.FD 0
int (*XESetWireToEvent(\^\fIdisplay\fP, \fIevent_number\fP, \fIproc\fP\^))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIevent_number\fP\^;
.br
Status (\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIevent_number\fP 1i
Specifies the event code.
.IP \fIproc\fP 1i
Specifies the procedure to call when converting an event.
.LP
.eM
The
.PN XESetWireToEvent
function defines a procedure to be called when an event
needs to be converted from wire format
.Pn ( xEvent )
to host format
.Pn ( XEvent ).
The event number defines which protocol event number to install a
conversion procedure for.
.PN XESetWireToEvent
returns any previously defined procedure.
.NT
You can replace a core event conversion function with one
of your own, although this is not encouraged.
It would, however, allow you to intercept a core event
and modify it before being placed in the queue or otherwise examined.
.NE
When Xlib needs to convert an event from wire format to host
format, your procedure is called with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
Status (*\fIproc\fP\^)(\^\fIdisplay\fP, \fIre\fP, \fIevent\fP\^)
Display *\fIdisplay\fP\^;
XEvent *\fIre\fP\^;
xEvent *\fIevent\fP\^;
.De
.LP
.eM
Your procedure must return status to indicate if the conversion succeeded.
The re argument is a pointer to where the host format event should be stored,
and the event argument is the 32-byte wire event structure.
In the
.PN XEvent
structure you are creating,
you must fill in the five required members of the event structure.
You should fill in the type member with the type specified for the
.PN xEvent
structure.
You should copy all other members from the
.PN xEvent
structure (wire format) to the
.PN XEvent
structure (host format).
Your conversion procedure should return
.PN True
if the event should be placed in the queue or
.PN False
if it should not be placed in the queue.
.LP
To initialize the serial number component of the event, call
.PN _XSetLastRequestRead
with the event and use the return value.
.LP
.IN "_XSetLastRequestRead" "" "@DEF@"
.sM
.FD 0
unsigned long _XSetLastRequestRead(\^\fIdisplay\fP, \fIrep\fP\^)
.br
Display *\fIdisplay\fP\^;
.br
xGenericReply *\fIrep\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIrep\fP 1i
Specifies the wire event structure.
.LP
.eM
The
.PN _XSetLastRequestRead
function computes and returns a complete serial number from the partial
serial number in the event.
.sp
.LP
.IN "XESetEventToWire" "" "@DEF@"
.sM
.FD 0
Status (*XESetEventToWire(\^\fIdisplay\fP, \fIevent_number\fP, \fIproc\fP\^))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIevent_number\fP\^;
.br
int (\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIevent_number\fP 1i
Specifies the event code.
.IP \fIproc\fP 1i
Specifies the procedure to call when converting an event.
.LP
.eM
The
.PN XESetEventToWire
function defines a procedure to be called when an event
needs to be converted from host format
.Pn ( XEvent )
to wire format
.Pn ( xEvent )
form.
The event number defines which protocol event number to install a
conversion procedure for.
.PN XESetEventToWire
returns any previously defined procedure.
It returns zero if the conversion fails or nonzero otherwise.
.NT
You can replace a core event conversion function with one
of your own, although this is not encouraged.
It would, however, allow you to intercept a core event
and modify it before being sent to another client.
.NE
When Xlib needs to convert an event from host format to wire format,
your procedure is called with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
(*\fIproc\fP\^)(\^\fIdisplay\fP, \fIre\fP, \fIevent\fP\^)
Display *\fIdisplay\fP\^;
XEvent *\fIre\fP\^;
xEvent *\fIevent\fP\^;
.De
.LP
.eM
The re argument is a pointer to the host format event,
and the event argument is a pointer to where the 32-byte wire event
structure should be stored.
You should fill in the type with the type from the
.PN XEvent
structure.
All other members then should be copied from the host format to the
.PN xEvent
structure.
.IN "XESetWireToError" "" "@DEF@"
.sM
.FD 0
Bool (*XESetWireToError(\^\fIdisplay\fP, \fIerror_number\fP, \fIproc\fP\^)(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIerror_number\fP\^;
.br
Bool (\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIerror_number\fP 1i
Specifies the error code.
.IP \fIproc\fP 1i
Specifies the procedure to call when an error is received.
.LP
.eM
The
.PN XESetWireToError
function defines a procedure to be called when an extension
error needs to be converted from wire format to host format.
The error number defines which protocol error code to install
the conversion procedure for.
.PN XESetWireToError
returns any previously defined procedure.
.LP
Use this function for extension errors that contain additional error values
beyond those in a core X error, when multiple wire errors must be combined
into a single Xlib error, or when it is necessary to intercept an
X error before it is otherwise examined.
.LP
When Xlib needs to convert an error from wire format to host format,
the procedure is called with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
Bool (*\fIproc\fP\^)(\^\fIdisplay\fP, \fIhe\fP, \fIwe\fP\^)
Display *\fIdisplay\fP\^;
XErrorEvent *\fIhe\fP\^;
xError *\fIwe\fP\^;
.De
.LP
.eM
The he argument is a pointer to where the host format error should be stored.
The structure pointed at by he is guaranteed to be as large as an
.PN XEvent
structure and so can be cast to a type larger than an
.PN XErrorEvent
to store additional values.
If the error is to be completely ignored by Xlib
(for example, several protocol error structures will be combined into
one Xlib error),
then the function should return
.PN False ;
otherwise, it should return
.PN True .
.IN "XESetError" "" "@DEF@"
.sM
.FD 0
int (*XESetError(\^\fIdisplay\fP, \fIextension\fP, \fIproc\fP\^))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIextension\fP\^;
.br
int (\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIextension\fP 1i
Specifies the extension number.
.IP \fIproc\fP 1i
Specifies the procedure to call when an error is received.
.LP
.eM
Inside Xlib, there are times that you may want to suppress the
calling of the external error handling when an error occurs.
This allows status to be returned on a call at the cost of the call
being synchronous (though most such functions are query operations, in any
case, and are typically programmed to be synchronous).
.LP
When Xlib detects a protocol error in
.PN _XReply ,
it calls your procedure with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
int (*\fIproc\fP\^)(\fIdisplay\fP, \fIerr\fP, \fIcodes\fP, \fIret_code\fP\^)
Display *\fIdisplay\fP\^;
xError *\fIerr\fP\^;
XExtCodes *\fIcodes\fP\^;
int *\fIret_code\fP\^;
.De
.LP
.eM
The err argument is a pointer to the 32-byte wire format error.
The codes argument is a pointer to the extension codes structure.
The ret_code argument is the return code you may want
.PN _XReply
returned to.
.LP
If your procedure returns a zero value,
the error is not suppressed, and
the client's error handler is called.
(For further information, see section 11.8.2.)
If your procedure returns nonzero,
the error is suppressed, and
.PN _XReply
returns the value of ret_code.
.IN "XESetErrorString" "" "@DEF@"
.sM
.FD 0
char *(*XESetErrorString(\^\fIdisplay\fP, \fIextension\fP, \fIproc\fP\^))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIextension\fP\^;
.br
char *(\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIextension\fP 1i
Specifies the extension number.
.IP \fIproc\fP 1i
Specifies the procedure to call to obtain an error string.
.LP
.eM
The
.PN XGetErrorText
function returns a string to the user for an error.
.PN XESetErrorString
allows you to define a procedure to be called that
should return a pointer to the error message.
The following is an example.
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
(*\fIproc\fP\^)(\^\fIdisplay\fP, \fIcode\fP, \fIcodes\fP, \fIbuffer\fP, \fInbytes\fP\^)
Display *\fIdisplay\fP\^;
int \fIcode\fP\^;
XExtCodes *\fIcodes\fP\^;
char *\fIbuffer\fP\^;
int \fInbytes\fP\^;
.De
.LP
.eM
Your procedure is called with the error code for every error detected.
You should copy nbytes of a null-terminated string containing the
error message into buffer.
.IN "XESetPrintErrorValues" "" "@DEF@"
.sM
.FD 0
void (*XESetPrintErrorValues(\^\fIdisplay\fP, \fIextension\fP, \fIproc\fP\^))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIextension\fP\^;
.br
void (\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIextension\fP 1i
Specifies the extension number.
.IP \fIproc\fP 1i
Specifies the procedure to call when an error is printed.
.LP
.eM
The
.PN XESetPrintErrorValues
function defines a procedure to be called when an extension
error is printed, to print the error values.
Use this function for extension errors that contain additional error values
beyond those in a core X error.
It returns any previously defined procedure.
.LP
When Xlib needs to print an error,
the procedure is called with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
void (*\fIproc\fP\^)(\^\fIdisplay\fP, \fIev\fP, \fIfp\fP\^)
Display *\fIdisplay\fP\^;
XErrorEvent *\fIev\fP\^;
void *\fIfp\fP\^;
.De
.LP
.eM
The structure pointed at by ev is guaranteed to be as large as an
.PN XEvent
structure and so can be cast to a type larger than an
.PN XErrorEvent
to obtain additional values set by using
.PN XESetWireToError .
The underlying type of the fp argument is system dependent;
on a POSIX-compliant system, fp should be cast to type FILE*.
.IN "XESetFlushGC" "" "@DEF@"
.sM
.FD 0
int (*XESetFlushGC(\^\fIdisplay\fP, \fIextension\fP, \fIproc\fP\^))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIextension\fP\^;
.br
int *(\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIextension\fP 1i
Specifies the extension number.
.IP \fIproc\fP 1i
Specifies the procedure to call when a GC is flushed.
.LP
.eM
The procedure set by the
.PN XESetFlushGC
function has the same interface as the procedure set by the
.PN XESetCopyGC
function, but is called when a GC cache needs to be updated in the server.
.IN "XESetBeforeFlush" "" "@DEF@"
.sM
.FD 0
int (*XESetBeforeFlush(\^\fIdisplay\fP, \fIextension\fP, \fIproc\fP\^))(\^)
.br
Display *\fIdisplay\fP\^;
.br
int \fIextension\fP\^;
.br
int *(\^*\fIproc\fP\^)(\^);
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIextension\fP 1i
Specifies the extension number.
.IP \fIproc\fP 1i
Specifies the procedure to call when a buffer is flushed.
.LP
.eM
The
.PN XESetBeforeFlush
function defines a procedure to be called when data is about to be
sent to the server. When data is about to be sent, your procedure is
called one or more times with these arguments:
.LP
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
.R
void (*\fIproc\fP\^)(\^\fIdisplay\fP, \fIcodes\fP, \fIdata\fP, \fIlen\fP\^)
Display *\fIdisplay\fP\^;
XExtCodes *\fIcodes\fP\^;
char *\fIdata\fP\^;
long \fIlen\fP\^;
.De
.LP
.eM
The data argument specifies a portion of the outgoing data buffer,
and its length in bytes is specified by the len argument.
Your procedure must not alter the contents of the data and must not
do additional protocol requests to the same display.
.SH
Hooks onto Xlib Data Structures
.LP
Various Xlib data structures have provisions for extension procedures
to chain extension supplied data onto a list.
These structures are
.PN GC ,
.PN Visual ,
.PN Screen ,
.PN ScreenFormat ,
.PN Display ,
and
.PN XFontStruct .
Because the list pointer is always the first member in the structure,
a single set of procedures can be used to manipulate the data
on these lists.
.LP
The following structure is used in the functions in this section
and is defined in
.hN X11/Xlib.h :
.LP
.IN "XExtData" "" "@DEF@"
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
typedef struct _XExtData {
int number; /* number returned by XInitExtension */
struct _XExtData *next; /* next item on list of data for structure */
int (*free_private)(); /* if defined, called to free private */
XPointer private_data; /* data private to this extension. */
} XExtData;
.De
.LP
.eM
When any of the data structures listed above are freed,
the list is walked, and the structure's free procedure (if any) is called.
If free is NULL,
then the library frees both the data pointed to by the private_data member
and the structure itself.
.LP
.sM
.Ds 0
.TA .5i
.ta .5i
union { Display *display;
GC gc;
Visual *visual;
Screen *screen;
ScreenFormat *pixmap_format;
XFontStruct *font } XEDataObject;
.De
.LP
.eM
.IN "XEHeadOfExtensionList" "" "@DEF@"
.sM
.FD 0
XExtData **XEHeadOfExtensionList(\^\fIobject\fP\^)
XEDataObject \fIobject\fP\^;
.FN
.IP \fIobject\fP 1i
Specifies the object.
.LP
.eM
The
.PN XEHeadOfExtensionList
function returns a pointer to the list of extension structures attached
to the specified object.
In concert with
.PN XAddToExtensionList ,
.PN XEHeadOfExtensionList
allows an extension to attach arbitrary data to any of the structures
of types contained in
.PN XEDataObject .
.LP
.IN "XAddToExtensionList" "" "@DEF@"
.sM
.FD 0
XAddToExtensionList(\^\fIstructure\fP, \fIext_data\fP\^)
.br
XExtData **\fIstructure\fP\^;
.br
XExtData *\fIext_data\fP\^;
.FN
.IP \fIstructure\fP 1i
Specifies the extension list.
.IP \fIext_data\fP 1i
Specifies the extension data structure to add.
.LP
.eM
The structure argument is a pointer to one of the data structures
enumerated above.
You must initialize ext_data->number with the extension number
before calling this function.
.IN "XFindOnExtensionList" "" "@DEF@"
.sM
.FD 0
XExtData *XFindOnExtensionList(\^\fIstructure\fP, \fInumber\fP\^)
.br
struct _XExtData **\fIstructure\fP\^;
.br
int \fInumber\fP\^;
.FN
.IP \fIstructure\fP 1i
Specifies the extension list.
.IP \fInumber\fP 1i
Specifies the extension number from
.PN XInitExtension .
.LP
.eM
The
.PN XFindOnExtensionList
function returns the first extension data structure
for the extension numbered number.
It is expected that an extension will add at most one extension
data structure to any single data structure's extension data list.
There is no way to find additional structures.
.LP
The
.PN XAllocID
macro, which allocates and returns a resource ID, is defined in
.hN X11/Xlib.h .
.IN "XAllocID" "" "@DEF@"
.sM
.FD 0
XAllocID\^(\fIdisplay\fP\^)
.br
Display *\fIdisplay\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.LP
.eM
This macro is a call through the
.PN Display
structure to an internal resource ID allocator.
It returns a resource ID that you can use when creating new resources.
.LP
The
.PN XAllocIDs
macro allocates and returns an array of resource ID.
.IN "XAllocIDs" "" "@DEF@"
.sM
.FD 0
XAllocIDs\^(\fIdisplay\fP, \fIids_return\fP, \fIcount\fP\^)
.br
Display *\fIdisplay\fP\^;
.br
XID *\fIids_return\fP\^;
.br
int \fIcount\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIids_return\fP 1i
Returns the resource IDs.
.IP \fIrep\fP 1i
Specifies the number of resource IDs requested.
.LP
.eM
This macro is a call through the
.PN Display
structure to an internal resource ID allocator.
It returns resource IDs to the array supplied by the caller.
To correctly handle automatic reuse of resource IDs, you must call
.PN XAllocIDs
when requesting multiple resource IDs. This call might generate
protocol requests.
.SH
GC Caching
.LP
GCs are cached by the library to allow merging of independent change
requests to the same GC into single protocol requests.
This is typically called a write-back cache.
Any extension procedure whose behavior depends on the contents of a GC
must flush the GC cache to make sure the server has up-to-date contents
in its GC.
.LP
The
.PN FlushGC
macro checks the dirty bits in the library's GC structure and calls
.PN _XFlushGCCache
if any elements have changed.
The
.PN FlushGC
macro is defined as follows:
.IN "FlushGC" "" "@DEF@"
.sM
.FD 0
FlushGC\^(\^\fIdisplay\fP\^, \fIgc\fP\^)
.br
Display *\^\fIdisplay\fP\^;
.br
GC \fIgc\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIgc\fP 1i
Specifies the GC.
.LP
.eM
Note that if you extend the GC to add additional resource ID components,
you should ensure that the library stub sends the change request immediately.
This is because a client can free a resource immediately after
using it, so if you only stored the value in the cache without
forcing a protocol request, the resource might be destroyed before being
set into the GC.
You can use the
.PN _XFlushGCCache
procedure
to force the cache to be flushed.
The
.PN _XFlushGCCache
procedure
is defined as follows:
.IN "_XFlushGCCache" "" "@DEF@"
.sM
.FD 0
_XFlushGCCache\^(\^\fIdisplay\fP\^, \fIgc\fP\^)
.br
Display *\^\fIdisplay\fP\^;
.br
GC \fIgc\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIgc\fP 1i
Specifies the GC.
.LP
.eM
.SH
Graphics Batching
.LP
If you extend X to add more poly graphics primitives, you may be able to
take advantage of facilities in the library to allow back-to-back
single calls to be transformed into poly requests.
This may dramatically improve performance of programs that are not
written using poly requests.
A pointer to an
.PN xReq ,
called last_req in the display structure, is the last request being processed.
By checking that the last request
type, drawable, gc, and other options are the same as the new one
and that there is enough space left in the buffer, you may be able
to just extend the previous graphics request by extending the length
field of the request and appending the data to the buffer.
This can improve performance by five times or more in naive programs.
For example, here is the source for the
.PN XDrawPoint
stub.
(Writing extension stubs is discussed in the next section.)
.IP
.sM
.nf
#include <X11/Xlibint.h>
/* precompute the maximum size of batching request allowed */
static int size = sizeof(xPolyPointReq) + EPERBATCH * sizeof(xPoint);
XDrawPoint(dpy, d, gc, x, y)
register Display *dpy;
Drawable d;
GC gc;
int x, y; /* INT16 */
{
xPoint *point;
LockDisplay(dpy);
FlushGC(dpy, gc);
{
register xPolyPointReq *req = (xPolyPointReq *) dpy->last_req;
/* if same as previous request, with same drawable, batch requests */
if (
(req->reqType == X_PolyPoint)
&& (req->drawable == d)
&& (req->gc == gc->gid)
&& (req->coordMode == CoordModeOrigin)
&& ((dpy->bufptr + sizeof (xPoint)) <= dpy->bufmax)
&& (((char *)dpy->bufptr - (char *)req) < size) ) {
point = (xPoint *) dpy->bufptr;
req->length += sizeof (xPoint) >> 2;
dpy->bufptr += sizeof (xPoint);
}
else {
GetReqExtra(PolyPoint, 4, req); /* 1 point = 4 bytes */
req->drawable = d;
req->gc = gc->gid;
req->coordMode = CoordModeOrigin;
point = (xPoint *) (req + 1);
}
point->x = x;
point->y = y;
}
UnlockDisplay(dpy);
SyncHandle();
}
.fi
.LP
.eM
To keep clients from generating very long requests that may monopolize the
server,
there is a symbol defined in
.hN X11/Xlibint.h
of EPERBATCH on the number of requests batched.
Most of the performance benefit occurs in the first few merged requests.
Note that
.PN FlushGC
is called \fIbefore\fP picking up the value of last_req,
because it may modify this field.
.SH
Writing Extension Stubs
.LP
All X requests always contain the length of the request,
expressed as a 16-bit quantity of 32 bits.
This means that a single request can be no more than 256K bytes in
length.
Some servers may not support single requests of such a length.
The value of dpy->max_request_size contains the maximum length as
defined by the server implementation.
For further information,
see ``X Window System Protocol.''
.SH
Requests, Replies, and Xproto.h
.LP
The
.hN X11/Xproto.h
file contains three sets of definitions that
are of interest to the stub implementor:
request names, request structures, and reply structures.
.LP
You need to generate a file equivalent to
.hN X11/Xproto.h
for your extension and need to include it in your stub procedure.
Each stub procedure also must include
.hN X11/Xlibint.h .
.LP
The identifiers are deliberately chosen in such a way that, if the
request is called X_DoSomething, then its request structure is
xDoSomethingReq, and its reply is xDoSomethingReply.
The GetReq family of macros, defined in
.hN X11/Xlibint.h ,
takes advantage of this naming scheme.
.LP
For each X request,
there is a definition in
.hN X11/Xproto.h
that looks similar to this:
.LP
.Ds
.R
#define X_DoSomething 42
.De
In your extension header file,
this will be a minor opcode,
instead of a major opcode.
.SH
Request Format
.LP
Every request contains an 8-bit major opcode and a 16-bit length field
expressed in units of 4 bytes.
Every request consists of 4 bytes of header
(containing the major opcode, the length field, and a data byte) followed by
zero or more additional bytes of data.
The length field defines the total length of the request, including the header.
The length field in a request must equal the minimum length required to contain
the request.
If the specified length is smaller or larger than the required length,
the server should generate a
.PN BadLength
error.
Unused bytes in a request are not required to be zero.
Extensions should be designed in such a way that long protocol requests
can be split up into smaller requests,
if it is possible to exceed the maximum request size of the server.
The protocol guarantees the maximum request size to be no smaller than
4096 units (16384 bytes).
.LP
Major opcodes 128 through 255 are reserved for extensions.
Extensions are intended to contain multiple requests,
so extension requests typically have an additional minor opcode encoded
in the second data byte in the request header,
but the placement and interpretation of this minor opcode as well as all
other fields in extension requests are not defined by the core protocol.
Every request is implicitly assigned a sequence number (starting with one)
used in replies, errors, and events.
.LP
To help but not cure portability problems to certain machines, the
.PN B16
and
.PN B32
macros have been defined so that they can become bitfield specifications
on some machines.
For example, on a Cray,
these should be used for all 16-bit and 32-bit quantities, as discussed below.
.LP
Most protocol requests have a corresponding structure typedef in
.hN X11/Xproto.h ,
which looks like:
.LP
.IN "xDoSomethingReq" "" "@DEF@"
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
typedef struct _DoSomethingReq {
CARD8 reqType; /* X_DoSomething */
CARD8 someDatum; /* used differently in different requests */
CARD16 length B16; /* total # of bytes in request, divided by 4 */
...
/* request-specific data */
...
} xDoSomethingReq;
.De
.LP
.eM
If a core protocol request has a single 32-bit argument,
you need not declare a request structure in your extension header file.
Instead, such requests use the
.PN xResourceReq
structure in
.hN X11/Xproto.h .
This structure is used for any request whose single argument is a
.PN Window ,
.PN Pixmap ,
.PN Drawable ,
.PN GContext ,
.PN Font ,
.PN Cursor ,
.PN Colormap ,
.PN Atom ,
or
.PN VisualID .
.LP
.IN "xResourceReq" "" "@DEF@"
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
typedef struct _ResourceReq {
CARD8 reqType; /* the request type, e.g. X_DoSomething */
BYTE pad; /* not used */
CARD16 length B16; /* 2 (= total # of bytes in request, divided by 4) */
CARD32 id B32; /* the Window, Drawable, Font, GContext, etc. */
} xResourceReq;
.De
.LP
.eM
If convenient,
you can do something similar in your extension header file.
.LP
In both of these structures,
the reqType field identifies the type of the request (for example,
X_MapWindow or X_CreatePixmap).
The length field tells how long the request is
in units of 4-byte longwords.
This length includes both the request structure itself and any
variable-length data, such as strings or lists, that follow the
request structure.
Request structures come in different sizes,
but all requests are padded to be multiples of four bytes long.
.LP
A few protocol requests take no arguments at all.
Instead, they use the
.PN xReq
structure in
.hN X11/Xproto.h ,
which contains only a reqType and a length (and a pad byte).
.LP
If the protocol request requires a reply,
then
.hN X11/Xproto.h
also contains a reply structure typedef:
.LP
.IN "xDoSomethingReply" "" "@DEF@"
.sM
.Ds 0
.TA .5i 3i
.ta .5i 3i
typedef struct _DoSomethingReply {
BYTE type; /* always X_Reply */
BYTE someDatum; /* used differently in different requests */
CARD16 sequenceNumber B16; /* # of requests sent so far */
CARD32 length B32; /* # of additional bytes, divided by 4 */
...
/* request-specific data */
...
} xDoSomethingReply;
.De
.LP
.eM
Most of these reply structures are 32 bytes long.
If there are not that many reply values,
then they contain a sufficient number of pad fields
to bring them up to 32 bytes.
The length field is the total number of bytes in the request minus 32,
divided by 4.
This length will be nonzero only if:
.IP \(bu 5
The reply structure is followed by variable-length data,
such as a list or string.
.IP \(bu 5
The reply structure is longer than 32 bytes.
.LP
Only
.PN GetWindowAttributes ,
.PN QueryFont ,
.PN QueryKeymap ,
and
.PN GetKeyboardControl
have reply structures longer than 32 bytes in the core protocol.
.LP
A few protocol requests return replies that contain no data.
.hN X11/Xproto.h
does not define reply structures for these.
Instead, they use the
.PN xGenericReply
structure, which contains only a type, length,
and sequence number (and sufficient padding to make it 32 bytes long).
.SH
Starting to Write a Stub Procedure
.LP
An Xlib stub procedure should start like this:
.LP
.Ds
.R
#include "<X11/Xlibint.h>
XDoSomething (arguments, ... )
/* argument declarations */
{
register XDoSomethingReq *req;
\^...
.De
If the protocol request has a reply,
then the variable declarations should include the reply structure for the request.
The following is an example:
.LP
.Ds
.R
xDoSomethingReply rep;
.De
.SH
Locking Data Structures
.LP
To lock the display structure for systems that
want to support multithreaded access to a single display connection,
each stub will need to lock its critical section.
Generally, this section is the point from just before the appropriate GetReq
call until all arguments to the call have been stored into the buffer.
The precise instructions needed for this locking depend upon the machine
architecture.
Two calls, which are generally implemented as macros, have been provided.
.IN "LockDisplay" "" "@DEF@"
.sM
.FD 0
LockDisplay(\^\fIdisplay\fP\^)
.br
Display *\fIdisplay\fP\^;
.FN
.LP
.IN "UnlockDisplay" "" "@DEF@"
.FD 0
UnlockDisplay(\^\fIdisplay\fP\^)
.br
Display *\fIdisplay\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.LP
.eM
.SH
Sending the Protocol Request and Arguments
.LP
After the variable declarations,
a stub procedure should call one of four macros defined in
.hN X11/Xlibint.h :
.PN GetReq ,
.PN GetReqExtra ,
.PN GetResReq ,
or
.PN GetEmptyReq .
All of these macros take, as their first argument,
the name of the protocol request as declared in
.hN X11/Xproto.h
except with X_ removed.
Each one declares a
.PN Display
structure pointer,
called dpy, and a pointer to a request structure, called req,
which is of the appropriate type.
The macro then appends the request structure to the output buffer,
fills in its type and length field, and sets req to point to it.
.LP
If the protocol request has no arguments (for instance, X_GrabServer),
then use
.PN GetEmptyReq .
.LP
.Ds
.R
GetEmptyReq (DoSomething, req);
.De
If the protocol request has a single 32-bit argument (such as a
.PN Pixmap ,
.PN Window ,
.PN Drawable ,
.PN Atom ,
and so on),
then use
.PN GetResReq .
The second argument to the macro is the 32-bit object.
.PN X_MapWindow
is a good example.
.LP
.Ds
.R
GetResReq (DoSomething, rid, req);
.De
The rid argument is the
.PN Pixmap ,
.PN Window ,
or other resource ID.
.LP
If the protocol request takes any other argument list,
then call
.PN GetReq .
After the
.PN GetReq ,
you need to set all the other fields in the request structure,
usually from arguments to the stub procedure.
.LP
.Ds
.R
GetReq (DoSomething, req);
/* fill in arguments here */
req->arg1 = arg1;
req->arg2 = arg2;
\^...
.De
A few stub procedures (such as
.PN XCreateGC
and
.PN XCreatePixmap )
return a resource ID to the caller but pass a resource ID as an argument
to the protocol request.
Such procedures use the macro
.PN XAllocID
to allocate a resource ID from the range of IDs
that were assigned to this client when it opened the connection.
.LP
.Ds
.R
rid = req->rid = XAllocID();
\^...
return (rid);
.De
Finally, some stub procedures transmit a fixed amount of variable-length
data after the request.
Typically, these procedures (such as
.PN XMoveWindow
and
.PN XSetBackground )
are special cases of more general functions like
.PN XMoveResizeWindow
and
.PN XChangeGC .
These procedures use
.PN GetReqExtra ,
which is the same as
.PN GetReq
except that it takes an additional argument (the number of
extra bytes to allocate in the output buffer after the request structure).
This number should always be a multiple of four.
.SH
Variable Length Arguments
.LP
Some protocol requests take additional variable-length data that
follow the
.PN xDoSomethingReq
structure.
The format of this data varies from request to request.
Some requests require a sequence of 8-bit bytes,
others a sequence of 16-bit or 32-bit entities,
and still others a sequence of structures.
.LP
It is necessary to add the length of any variable-length data to the
length field of the request structure.
That length field is in units of 32-bit longwords.
If the data is a string or other sequence of 8-bit bytes,
then you must round the length up and shift it before adding:
.LP
.Ds
.R
req->length += (nbytes+3)>>2;
.De
To transmit variable-length data, use the
.PN Data
macros.
If the data fits into the output buffer,
then this macro copies it to the buffer.
If it does not fit, however,
the
.PN Data
macro calls
.PN _XSend ,
which transmits first the contents of the buffer and then your data.
The
.PN Data
macros take three arguments:
the display, a pointer to the beginning of the data,
and the number of bytes to be sent.
.sM
.FD 0
Data(\^\fIdisplay\fP, (char *) \fIdata\fP, \fInbytes\fP\^);
.sp
Data16(\^\fIdisplay\fP, (short *) \fIdata\fP, \fInbytes\fP\^);
.sp
Data32(\^\fIdisplay\fP, (long *) \fIdata\fP, \fInbytes\fP\^);
.FN
.LP
.eM
.PN Data ,
.PN Data16 ,
and
.PN Data32
are macros that may use their last argument
more than once, so that argument should be a variable rather than
an expression such as ``nitems*sizeof(item)''.
You should do that kind of computation in a separate statement before calling
them.
Use the appropriate macro when sending byte, short, or long data.
.LP
If the protocol request requires a reply,
then call the procedure
.PN _XSend
instead of the
.PN Data
macro.
.PN _XSend
takes the same arguments, but because it sends your data immediately instead of
copying it into the output buffer (which would later be flushed
anyway by the following call on
.PN _XReply ),
it is faster.
.SH
Replies
.LP
If the protocol request has a reply,
then call
.PN _XReply
after you have finished dealing with
all the fixed-length and variable-length arguments.
.PN _XReply
flushes the output buffer and waits for an
.PN xReply
packet to arrive.
If any events arrive in the meantime,
.PN _XReply
places them in the queue for later use.
.IN "_XReply" "" "@DEF@"
.sM
.FD 0
Status _XReply(\^\fIdisplay\fP, \fIrep\fP, \fIextra\fP, \fIdiscard\fP\^)
.br
Display *\fIdisplay\fP\^;
.br
xReply *\fIrep\fP\^;
.br
int \fIextra\fP\^;
.br
Bool \fIdiscard\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIrep\fP 1i
Specifies the reply structure.
.IP \fIextra\fP 1i
Specifies the number of 32-bit words expected after the replay.
.IP \fIdiscard\fP 1i
Specifies if any data beyond that specified in the extra argument
should be discarded.
.LP
.eM
The
.PN _XReply
function waits for a reply packet and copies its contents into the
specified rep.
.PN _XReply
handles error and event packets that occur before the reply is received.
.PN _XReply
takes four arguments:
.IP \(bu 5
A
.PN Display
* structure
.IP \(bu 5
A pointer to a reply structure (which must be cast to an
.PN xReply
*)
.IP \(bu 5
The number of additional 32-bit words (beyond
.Pn sizeof( xReply )
= 32 bytes)
in the reply structure
.IP \(bu 5
A Boolean that indicates whether
.PN _XReply
is to discard any additional bytes
beyond those it was told to read
.LP
Because most reply structures are 32 bytes long,
the third argument is usually 0.
The only core protocol exceptions are the replies to
.PN GetWindowAttributes ,
.PN QueryFont ,
.PN QueryKeymap ,
and
.PN GetKeyboardControl ,
which have longer replies.
.LP
The last argument should be
.PN False
if the reply structure is followed
by additional variable-length data (such as a list or string).
It should be
.PN True
if there is not any variable-length data.
.NT
This last argument is provided for upward-compatibility reasons
to allow a client to communicate properly with a hypothetical later
version of the server that sends more data than the client expected.
For example, some later version of
.PN GetWindowAttributes
might use a
larger, but compatible,
.PN xGetWindowAttributesReply
that contains additional attribute data at the end.
.NE
.PN _XReply
returns
.PN True
if it received a reply successfully or
.PN False
if it received any sort of error.
.LP
For a request with a reply that is not followed by variable-length
data, you write something like:
.LP
.Ds
.R
_XReply(display, (xReply *)&rep, 0, True);
*ret1 = rep.ret1;
*ret2 = rep.ret2;
*ret3 = rep.ret3;
\^...
UnlockDisplay(dpy);
SyncHandle();
return (rep.ret4);
}
.De
If there is variable-length data after the reply,
change the
.PN True
to
.PN False ,
and use the appropriate
.PN _XRead
function to read the variable-length data.
.LP
.sM
.FD 0
_XRead(\^\fIdisplay\fP, \fIdata_return\fP, \fInbytes\fP\^)
Display *\fIdisplay\fP\^;
char *\fIdata_return\fP\^;
long \fInbytes\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIdata_return\fP 1i
Specifies the buffer.
.IP \fInbytes\fP 1i
Specifies the number of bytes required.
.LP
.eM
The
.PN _XRead
function reads the specified number of bytes into data_return.
.LP
.sM
.FD 0
_XRead16(\^\fIdisplay\fP, \fIdata_return\fP, \fInbytes\fP\^)
Display *\fIdisplay\fP\^;
short *\fIdata_return\fP\^;
long \fInbytes\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIdata_return\fP 1i
Specifies the buffer.
.IP \fInbytes\fP 1i
Specifies the number of bytes required.
.LP
.eM
The
.PN _XRead16
function reads the specified number of bytes,
unpacking them as 16-bit quantities,
into the specified array as shorts.
.LP
.sM
.FD 0
_XRead32(\^\fIdisplay\fP, \fIdata_return\fP, \fInbytes\fP\^)
Display *\fIdisplay\fP\^;
long *\fIdata_return\fP\^;
long \fInbytes\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIdata_return\fP 1i
Specifies the buffer.
.IP \fInbytes\fP 1i
Specifies the number of bytes required.
.LP
.eM
The
.PN _XRead32
function reads the specified number of bytes,
unpacking them as 32-bit quantities,
into the specified array as longs.
.LP
.sM
.FD 0
_XRead16Pad(\^\fIdisplay\fP, \fIdata_return\fP, \fInbytes\fP\^)
Display *\fIdisplay\fP\^;
short *\fIdata_return\fP\^;
long \fInbytes\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIdata_return\fP 1i
Specifies the buffer.
.IP \fInbytes\fP 1i
Specifies the number of bytes required.
.LP
.eM
The
.PN _XRead16Pad
function reads the specified number of bytes,
unpacking them as 16-bit quantities,
into the specified array as shorts.
If the number of bytes is not a multiple of four,
.PN _XRead16Pad
reads and discards up to two additional pad bytes.
.LP
.sM
.FD 0
_XReadPad(\^\fIdisplay\fP, \fIdata_return\fP, \fInbytes\fP\^)
Display *\fIdisplay\fP\^;
char *\fIdata_return\fP\^;
long \fInbytes\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIdata_return\fP 1i
Specifies the buffer.
.IP \fInbytes\fP 1i
Specifies the number of bytes required.
.LP
.eM
The
.PN _XReadPad
function reads the specified number of bytes into data_return.
If the number of bytes is not a multiple of four,
.PN _XReadPad
reads and discards up to three additional pad bytes.
.LP
Each protocol request is a little different.
For further information,
see the Xlib sources for examples.
.SH
Synchronous Calling
.LP
Each procedure should have a call, just before returning to the user,
to a macro called
.PN SyncHandle .
If synchronous mode is enabled (see
.PN XSynchronize ),
the request is sent immediately.
The library, however, waits until any error the procedure could generate
at the server has been handled.
.SH
Allocating and Deallocating Memory
.LP
To support the possible reentry of these procedures,
you must observe several conventions when allocating and deallocating memory,
most often done when returning data to the user from the window
system of a size the caller could not know in advance
(for example, a list of fonts or a list of extensions).
The standard C library functions on many systems
are not protected against signals or other multithreaded uses.
The following analogies to standard I/O library functions
have been defined:
.TS
l l.
T{
.PN Xmalloc ()
T} T{
Replaces
.PN malloc ()
T}
T{
.PN XFree ()
T} T{
Replaces
.PN free ()
T}
T{
.PN Xcalloc ()
T} T{
Replaces
.PN calloc ()
T}
.TE
.LP
These should be used in place of any calls you would make to the normal
C library functions.
.LP
If you need a single scratch buffer inside a critical section
(for example, to pack and unpack data to and from the wire protocol),
the general memory allocators may be too expensive to use
(particularly in output functions, which are performance critical).
The following function returns a scratch buffer for use within a
critical section:
.IN "_XAllocScratch" "" "@DEF@"
.sM
.FD 0
char *_XAllocScratch(\^\fIdisplay\fP, \fInbytes\fP\^)
.br
Display *\fIdisplay\fP\^;
.br
unsigned long \fInbytes\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fInbytes\fP 1i
Specifies the number of bytes required.
.LP
.eM
This storage must only be used inside of a critical section of your
stub. The returned pointer cannot be assumed valid after any call
that might permit another thread to execute inside Xlib. For example,
the pointer cannot be assumed valid after any use of the
.PN GetReq
or
.PN Data
families of macros,
after any use of
.PN _XReply ,
or after any use of the
.PN _XSend
or
.PN _XRead
families of functions.
.LP
.sp
The following function returns a scratch buffer for use across
critical sections:
.IN "_XAllocTemp" "" "@DEF@"
.sM
.FD 0
char *_XAllocTemp(\^\fIdisplay\fP, \fInbytes\fP\^)
.br
Display *\fIdisplay\fP\^;
.br
unsigned long \fInbytes\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fInbytes\fP 1i
Specifies the number of bytes required.
.LP
.eM
This storage can be used across calls that might permit another thread to
execute inside Xlib. The storage must be explicitly returned to Xlib.
The following function returns the storage:
.IN "_XFreeTemp" "" "@DEF@"
.sM
.FD 0
void _XFreeTemp(\^\fIdisplay\fP, \fIbuf\fP, \fInbytes\fP\^)
.br
Display *\fIdisplay\fP\^;
.br
char *\fIbuf\fP\^;
.br
unsigned long \fInbytes\fP\^;
.FN
.IP \fIdisplay\fP 1i
Specifies the connection to the X server.
.IP \fIbuf\fP 1i
Specifies the buffer to return.
.IP \fInbytes\fP 1i
Specifies the size of the buffer.
.LP
.eM
You must pass back the same pointer and size that were returned by
.PN _XAllocTemp .
.SH
Portability Considerations
.LP
Many machine architectures,
including many of the more recent RISC architectures,
do not correctly access data at unaligned locations;
their compilers pad out structures to preserve this characteristic.
Many other machines capable of unaligned references pad inside of structures
as well to preserve alignment, because accessing aligned data is
usually much faster.
Because the library and the server use structures to access data at
arbitrary points in a byte stream,
all data in request and reply packets \fImust\fP be naturally aligned;
that is, 16-bit data starts on 16-bit boundaries in the request
and 32-bit data on 32-bit boundaries.
All requests \fImust\fP be a multiple of 32 bits in length to preserve
the natural alignment in the data stream.
You must pad structures out to 32-bit boundaries.
Pad information does not have to be zeroed unless you want to
preserve such fields for future use in your protocol requests.
Floating point varies radically between machines and should be
avoided completely if at all possible.
.LP
This code may run on machines with 16-bit ints.
So, if any integer argument, variable, or return value either can take
only nonnegative values or is declared as a
.PN CARD16
in the protocol, be sure to declare it as
.PN unsigned
.PN int
and not as
.PN int .
(This, of course, does not apply to Booleans or enumerations.)
.LP
Similarly,
if any integer argument or return value is declared
.PN CARD32
in the protocol,
declare it as an
.PN unsigned
.PN long
and not as
.PN int
or
.PN long .
This also goes for any internal variables that may
take on values larger than the maximum 16-bit
.PN unsigned
.PN int .
.LP
The library currently assumes that a
.PN char
is 8 bits, a
.PN short
is 16 bits, an
.PN int
is 16 or 32 bits, and a
.PN long
is 32 bits.
The
.PN PackData
macro is a half-hearted attempt to deal with the possibility of 32 bit shorts.
However, much more work is needed to make this work properly.
.SH
Deriving the Correct Extension Opcode
.LP
The remaining problem a writer of an extension stub procedure faces that
the core protocol does not face is to map from the call to the proper
major and minor opcodes.
While there are a number of strategies,
the simplest and fastest is outlined below.
.IP 1. 5
Declare an array of pointers, _NFILE long (this is normally found
in
.hN stdio.h
and is the number of file descriptors supported on the system)
of type
.PN XExtCodes .
Make sure these are all initialized to NULL.
.IP 2. 5
When your stub is entered, your initialization test is just to use
the display pointer passed in to access the file descriptor and an index
into the array.
If the entry is NULL, then this is the first time you
are entering the procedure for this display.
Call your initialization procedure and pass to it the display pointer.
.IP 3. 5
Once in your initialization procedure, call
.PN XInitExtension ;
if it succeeds, store the pointer returned into this array.
Make sure to establish a close display handler to allow you to zero the entry.
Do whatever other initialization your extension requires.
(For example, install event handlers and so on.)
Your initialization procedure would normally return a pointer to the
.PN XExtCodes
structure for this extension, which is what would normally
be found in your array of pointers.
.IP 4. 5
After returning from your initialization procedure,
the stub can now continue normally, because it has its major opcode safely
in its hand in the
.PN XExtCodes
structure.
.bp