/*********************************************************** Copyright 1987, 1988, 1989, 1998 The Open Group Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of The Open Group shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from The Open Group. Copyright 1987, 1988, 1989 by Digital Equipment Corporation, Maynard, Massachusetts. All Rights Reserved Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Digital not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ******************************************************************/ #include #include #include #include "pixregionint.h" #include "slim_internal.h" #if defined (__GNUC__) && !defined (NO_INLINES) #define INLINE __inline #else #define INLINE #endif #undef assert #ifdef DEBUG_PIXREGION #define assert(expr) {if (!(expr)) \ FatalError("Assertion failed file %s, line %d: expr\n", \ __FILE__, __LINE__); } #else #define assert(expr) #endif #define good(reg) assert(pixman_region16_valid(reg)) #define MIN(a,b) ((a) < (b) ? (a) : (b)) #define MAX(a,b) ((a) > (b) ? (a) : (b)) static pixman_box16_t pixman_region_emptyBox = {0, 0, 0, 0}; static pixman_region16_data_t pixman_region_emptyData = {0, 0}; static pixman_region16_data_t pixman_brokendata = {0, 0}; static pixman_region16_t pixman_brokenregion = { { 0, 0, 0, 0 }, &pixman_brokendata }; static pixman_region_status_t pixman_break (pixman_region16_t *pReg); static void pixman_init (pixman_region16_t *region, pixman_box16_t *rect); static void pixman_uninit (pixman_region16_t *region); slim_hidden_proto(pixman_region_create_simple) slim_hidden_proto(pixman_region_copy) slim_hidden_proto(pixman_region_union) /* * The functions in this file implement the Region abstraction used extensively * throughout the X11 sample server. A Region is simply a set of disjoint * (non-overlapping) rectangles, plus an "extent" rectangle which is the * smallest single rectangle that contains all the non-overlapping rectangles. * * A Region is implemented as a "y-x-banded" array of rectangles. This array * imposes two degrees of order. First, all rectangles are sorted by top side * y coordinate first (y1), and then by left side x coordinate (x1). * * Furthermore, the rectangles are grouped into "bands". Each rectangle in a * band has the same top y coordinate (y1), and each has the same bottom y * coordinate (y2). Thus all rectangles in a band differ only in their left * and right side (x1 and x2). Bands are implicit in the array of rectangles: * there is no separate list of band start pointers. * * The y-x band representation does not minimize rectangles. In particular, * if a rectangle vertically crosses a band (the rectangle has scanlines in * the y1 to y2 area spanned by the band), then the rectangle may be broken * down into two or more smaller rectangles stacked one atop the other. * * ----------- ----------- * | | | | band 0 * | | -------- ----------- -------- * | | | | in y-x banded | | | | band 1 * | | | | form is | | | | * ----------- | | ----------- -------- * | | | | band 2 * -------- -------- * * An added constraint on the rectangles is that they must cover as much * horizontal area as possible: no two rectangles within a band are allowed * to touch. * * Whenever possible, bands will be merged together to cover a greater vertical * distance (and thus reduce the number of rectangles). Two bands can be merged * only if the bottom of one touches the top of the other and they have * rectangles in the same places (of the same width, of course). * * Adam de Boor wrote most of the original region code. Joel McCormack * substantially modified or rewrote most of the core arithmetic routines, and * added pixman_region_validate in order to support several speed improvements to * pixman_region_validateTree. Bob Scheifler changed the representation to be more * compact when empty or a single rectangle, and did a bunch of gratuitous * reformatting. Carl Worth did further gratuitous reformatting while re-merging * the server and client region code into libpixregion. */ /* true iff two Boxes overlap */ #define EXTENTCHECK(r1,r2) \ (!( ((r1)->x2 <= (r2)->x1) || \ ((r1)->x1 >= (r2)->x2) || \ ((r1)->y2 <= (r2)->y1) || \ ((r1)->y1 >= (r2)->y2) ) ) /* true iff (x,y) is in Box */ #define INBOX(r,x,y) \ ( ((r)->x2 > x) && \ ((r)->x1 <= x) && \ ((r)->y2 > y) && \ ((r)->y1 <= y) ) /* true iff Box r1 contains Box r2 */ #define SUBSUMES(r1,r2) \ ( ((r1)->x1 <= (r2)->x1) && \ ((r1)->x2 >= (r2)->x2) && \ ((r1)->y1 <= (r2)->y1) && \ ((r1)->y2 >= (r2)->y2) ) #define allocData(n) malloc(PIXREGION_SZOF(n)) #define freeData(reg) if ((reg)->data && (reg)->data->size) free((reg)->data) #define RECTALLOC_BAIL(pReg,n,bail) \ if (!(pReg)->data || (((pReg)->data->numRects + (n)) > (pReg)->data->size)) \ if (!pixman_rect_alloc(pReg, n)) { goto bail; } #define RECTALLOC(pReg,n) \ if (!(pReg)->data || (((pReg)->data->numRects + (n)) > (pReg)->data->size)) \ if (!pixman_rect_alloc(pReg, n)) { return PIXMAN_REGION_STATUS_FAILURE; } #define ADDRECT(pNextRect,nx1,ny1,nx2,ny2) \ { \ pNextRect->x1 = nx1; \ pNextRect->y1 = ny1; \ pNextRect->x2 = nx2; \ pNextRect->y2 = ny2; \ pNextRect++; \ } #define NEWRECT(pReg,pNextRect,nx1,ny1,nx2,ny2) \ { \ if (!(pReg)->data || ((pReg)->data->numRects == (pReg)->data->size))\ { \ if (!pixman_rect_alloc(pReg, 1)) \ return PIXMAN_REGION_STATUS_FAILURE; \ pNextRect = PIXREGION_TOP(pReg); \ } \ ADDRECT(pNextRect,nx1,ny1,nx2,ny2); \ pReg->data->numRects++; \ assert(pReg->data->numRects<=pReg->data->size); \ } #define DOWNSIZE(reg,numRects) \ if (((numRects) < ((reg)->data->size >> 1)) && ((reg)->data->size > 50)) \ { \ pixman_region16_data_t * NewData; \ NewData = (pixman_region16_data_t *)realloc((reg)->data, PIXREGION_SZOF(numRects)); \ if (NewData) \ { \ NewData->size = (numRects); \ (reg)->data = NewData; \ } \ } #ifdef DEBUG_PIXREGION int pixman_region16_print(rgn) pixman_region16_t * rgn; { int num, size; int i; pixman_box16_t * rects; num = PIXREGION_NUM_RECTS(rgn); size = PIXREGION_SIZE(rgn); rects = PIXREGION_RECTS(rgn); ErrorF("num: %d size: %d\n", num, size); ErrorF("extents: %d %d %d %d\n", rgn->extents.x1, rgn->extents.y1, rgn->extents.x2, rgn->extents.y2); for (i = 0; i < num; i++) ErrorF("%d %d %d %d \n", rects[i].x1, rects[i].y1, rects[i].x2, rects[i].y2); ErrorF("\n"); return(num); } pixman_region_status_t pixman_region16_tsEqual(reg1, reg2) pixman_region16_t * reg1; pixman_region16_t * reg2; { int i; pixman_box16_t * rects1, rects2; if (reg1->extents.x1 != reg2->extents.x1) return PIXMAN_REGION_STATUS_FAILURE; if (reg1->extents.x2 != reg2->extents.x2) return PIXMAN_REGION_STATUS_FAILURE; if (reg1->extents.y1 != reg2->extents.y1) return PIXMAN_REGION_STATUS_FAILURE; if (reg1->extents.y2 != reg2->extents.y2) return PIXMAN_REGION_STATUS_FAILURE; if (PIXREGION_NUM_RECTS(reg1) != PIXREGION_NUM_RECTS(reg2)) return PIXMAN_REGION_STATUS_FAILURE; rects1 = PIXREGION_RECTS(reg1); rects2 = PIXREGION_RECTS(reg2); for (i = 0; i != PIXREGION_NUM_RECTS(reg1); i++) { if (rects1[i].x1 != rects2[i].x1) return PIXMAN_REGION_STATUS_FAILURE; if (rects1[i].x2 != rects2[i].x2) return PIXMAN_REGION_STATUS_FAILURE; if (rects1[i].y1 != rects2[i].y1) return PIXMAN_REGION_STATUS_FAILURE; if (rects1[i].y2 != rects2[i].y2) return PIXMAN_REGION_STATUS_FAILURE; } return PIXMAN_REGION_STATUS_SUCCESS; } pixman_region_status_t pixman_region16_valid(reg) pixman_region16_t * reg; { int i, numRects; if ((reg->extents.x1 > reg->extents.x2) || (reg->extents.y1 > reg->extents.y2)) return PIXMAN_REGION_STATUS_FAILURE; numRects = PIXREGION_NUM_RECTS(reg); if (!numRects) return ((reg->extents.x1 == reg->extents.x2) && (reg->extents.y1 == reg->extents.y2) && (reg->data->size || (reg->data == &pixman_region_emptyData))); else if (numRects == 1) return (!reg->data); else { pixman_box16_t * pboxP, pboxN; pixman_box16_t box; pboxP = PIXREGION_RECTS(reg); box = *pboxP; box.y2 = pboxP[numRects-1].y2; pboxN = pboxP + 1; for (i = numRects; --i > 0; pboxP++, pboxN++) { if ((pboxN->x1 >= pboxN->x2) || (pboxN->y1 >= pboxN->y2)) return PIXMAN_REGION_STATUS_FAILURE; if (pboxN->x1 < box.x1) box.x1 = pboxN->x1; if (pboxN->x2 > box.x2) box.x2 = pboxN->x2; if ((pboxN->y1 < pboxP->y1) || ((pboxN->y1 == pboxP->y1) && ((pboxN->x1 < pboxP->x2) || (pboxN->y2 != pboxP->y2)))) return PIXMAN_REGION_STATUS_FAILURE; } return ((box.x1 == reg->extents.x1) && (box.x2 == reg->extents.x2) && (box.y1 == reg->extents.y1) && (box.y2 == reg->extents.y2)); } } #endif /* DEBUG_PIXREGION */ /* Create a new empty region */ pixman_region16_t * pixman_region_create (void) { return pixman_region_create_simple (NULL); } /***************************************************************** * pixman_region_create_simple (extents) * This routine creates a pixman_region16_t for a simple * rectangular region. *****************************************************************/ pixman_region16_t * pixman_region_create_simple (pixman_box16_t *extents) { pixman_region16_t *region; region = malloc (sizeof (pixman_region16_t)); if (region == NULL) return &pixman_brokenregion; pixman_init (region, extents); return region; } slim_hidden_def(pixman_region_create_simple); /***************************************************************** * RegionInit(pReg, rect, size) * Outer region rect is statically allocated. *****************************************************************/ static void pixman_init(pixman_region16_t *region, pixman_box16_t *extents) { if (extents) { region->extents = *extents; region->data = NULL; } else { region->extents = pixman_region_emptyBox; region->data = &pixman_region_emptyData; } } static void pixman_uninit (pixman_region16_t *region) { good (region); freeData (region); } void pixman_region_destroy (pixman_region16_t *region) { pixman_uninit (region); if (region != &pixman_brokenregion) free (region); } int pixman_region_num_rects (pixman_region16_t *region) { return PIXREGION_NUM_RECTS (region); } pixman_box16_t * pixman_region_rects (pixman_region16_t *region) { return PIXREGION_RECTS (region); } static pixman_region_status_t pixman_break (pixman_region16_t *region) { freeData (region); region->extents = pixman_region_emptyBox; region->data = &pixman_brokendata; return PIXMAN_REGION_STATUS_FAILURE; } static pixman_region_status_t pixman_rect_alloc(pixman_region16_t * region, int n) { pixman_region16_data_t *data; if (!region->data) { n++; region->data = allocData(n); if (!region->data) return pixman_break (region); region->data->numRects = 1; *PIXREGION_BOXPTR(region) = region->extents; } else if (!region->data->size) { region->data = allocData(n); if (!region->data) return pixman_break (region); region->data->numRects = 0; } else { if (n == 1) { n = region->data->numRects; if (n > 500) /* XXX pick numbers out of a hat */ n = 250; } n += region->data->numRects; data = (pixman_region16_data_t *)realloc(region->data, PIXREGION_SZOF(n)); if (!data) return pixman_break (region); region->data = data; } region->data->size = n; return PIXMAN_REGION_STATUS_SUCCESS; } pixman_region_status_t pixman_region_copy(pixman_region16_t *dst, pixman_region16_t *src) { good(dst); good(src); if (dst == src) return PIXMAN_REGION_STATUS_SUCCESS; dst->extents = src->extents; if (!src->data || !src->data->size) { freeData(dst); dst->data = src->data; return PIXMAN_REGION_STATUS_SUCCESS; } if (!dst->data || (dst->data->size < src->data->numRects)) { freeData(dst); dst->data = allocData(src->data->numRects); if (!dst->data) return pixman_break (dst); dst->data->size = src->data->numRects; } dst->data->numRects = src->data->numRects; memmove((char *)PIXREGION_BOXPTR(dst),(char *)PIXREGION_BOXPTR(src), dst->data->numRects * sizeof(pixman_box16_t)); return PIXMAN_REGION_STATUS_SUCCESS; } slim_hidden_def(pixman_region_copy); /*====================================================================== * Generic Region Operator *====================================================================*/ /*- *----------------------------------------------------------------------- * pixman_coalesce -- * Attempt to merge the boxes in the current band with those in the * previous one. We are guaranteed that the current band extends to * the end of the rects array. Used only by pixman_op. * * Results: * The new index for the previous band. * * Side Effects: * If coalescing takes place: * - rectangles in the previous band will have their y2 fields * altered. * - region->data->numRects will be decreased. * *----------------------------------------------------------------------- */ INLINE static int pixman_coalesce ( pixman_region16_t * region, /* Region to coalesce */ int prevStart, /* Index of start of previous band */ int curStart) /* Index of start of current band */ { pixman_box16_t * pPrevBox; /* Current box in previous band */ pixman_box16_t * pCurBox; /* Current box in current band */ int numRects; /* Number rectangles in both bands */ int y2; /* Bottom of current band */ /* * Figure out how many rectangles are in the band. */ numRects = curStart - prevStart; assert(numRects == region->data->numRects - curStart); if (!numRects) return curStart; /* * The bands may only be coalesced if the bottom of the previous * matches the top scanline of the current. */ pPrevBox = PIXREGION_BOX(region, prevStart); pCurBox = PIXREGION_BOX(region, curStart); if (pPrevBox->y2 != pCurBox->y1) return curStart; /* * Make sure the bands have boxes in the same places. This * assumes that boxes have been added in such a way that they * cover the most area possible. I.e. two boxes in a band must * have some horizontal space between them. */ y2 = pCurBox->y2; do { if ((pPrevBox->x1 != pCurBox->x1) || (pPrevBox->x2 != pCurBox->x2)) { return (curStart); } pPrevBox++; pCurBox++; numRects--; } while (numRects); /* * The bands may be merged, so set the bottom y of each box * in the previous band to the bottom y of the current band. */ numRects = curStart - prevStart; region->data->numRects -= numRects; do { pPrevBox--; pPrevBox->y2 = y2; numRects--; } while (numRects); return prevStart; } /* Quicky macro to avoid trivial reject procedure calls to pixman_coalesce */ #define Coalesce(newReg, prevBand, curBand) \ if (curBand - prevBand == newReg->data->numRects - curBand) { \ prevBand = pixman_coalesce(newReg, prevBand, curBand); \ } else { \ prevBand = curBand; \ } /*- *----------------------------------------------------------------------- * pixman_region_appendNonO -- * Handle a non-overlapping band for the union and subtract operations. * Just adds the (top/bottom-clipped) rectangles into the region. * Doesn't have to check for subsumption or anything. * * Results: * None. * * Side Effects: * region->data->numRects is incremented and the rectangles overwritten * with the rectangles we're passed. * *----------------------------------------------------------------------- */ INLINE static pixman_region_status_t pixman_region_appendNonO ( pixman_region16_t * region, pixman_box16_t * r, pixman_box16_t * rEnd, int y1, int y2) { pixman_box16_t * pNextRect; int newRects; newRects = rEnd - r; assert(y1 < y2); assert(newRects != 0); /* Make sure we have enough space for all rectangles to be added */ RECTALLOC(region, newRects); pNextRect = PIXREGION_TOP(region); region->data->numRects += newRects; do { assert(r->x1 < r->x2); ADDRECT(pNextRect, r->x1, y1, r->x2, y2); r++; } while (r != rEnd); return PIXMAN_REGION_STATUS_SUCCESS; } #define FindBand(r, rBandEnd, rEnd, ry1) \ { \ ry1 = r->y1; \ rBandEnd = r+1; \ while ((rBandEnd != rEnd) && (rBandEnd->y1 == ry1)) { \ rBandEnd++; \ } \ } #define AppendRegions(newReg, r, rEnd) \ { \ int newRects; \ if ((newRects = rEnd - r)) { \ RECTALLOC(newReg, newRects); \ memmove((char *)PIXREGION_TOP(newReg),(char *)r, \ newRects * sizeof(pixman_box16_t)); \ newReg->data->numRects += newRects; \ } \ } /*- *----------------------------------------------------------------------- * pixman_op -- * Apply an operation to two regions. Called by pixman_region_union, pixman_region_inverse, * pixman_region_subtract, pixman_region_intersect.... Both regions MUST have at least one * rectangle, and cannot be the same object. * * Results: * PIXMAN_REGION_STATUS_SUCCESS if successful. * * Side Effects: * The new region is overwritten. * pOverlap set to PIXMAN_REGION_STATUS_SUCCESS if overlapFunc ever returns PIXMAN_REGION_STATUS_SUCCESS. * * Notes: * The idea behind this function is to view the two regions as sets. * Together they cover a rectangle of area that this function divides * into horizontal bands where points are covered only by one region * or by both. For the first case, the nonOverlapFunc is called with * each the band and the band's upper and lower extents. For the * second, the overlapFunc is called to process the entire band. It * is responsible for clipping the rectangles in the band, though * this function provides the boundaries. * At the end of each band, the new region is coalesced, if possible, * to reduce the number of rectangles in the region. * *----------------------------------------------------------------------- */ typedef pixman_region_status_t (*OverlapProcPtr)( pixman_region16_t *region, pixman_box16_t *r1, pixman_box16_t *r1End, pixman_box16_t *r2, pixman_box16_t *r2End, short y1, short y2, int *pOverlap); static pixman_region_status_t pixman_op( pixman_region16_t * newReg, /* Place to store result */ pixman_region16_t * reg1, /* First region in operation */ pixman_region16_t * reg2, /* 2d region in operation */ OverlapProcPtr overlapFunc, /* Function to call for over- * lapping bands */ int appendNon1, /* Append non-overlapping bands */ /* in region 1 ? */ int appendNon2, /* Append non-overlapping bands */ /* in region 2 ? */ int *pOverlap) { pixman_box16_t * r1; /* Pointer into first region */ pixman_box16_t * r2; /* Pointer into 2d region */ pixman_box16_t * r1End; /* End of 1st region */ pixman_box16_t * r2End; /* End of 2d region */ short ybot; /* Bottom of intersection */ short ytop; /* Top of intersection */ pixman_region16_data_t * oldData; /* Old data for newReg */ int prevBand; /* Index of start of * previous band in newReg */ int curBand; /* Index of start of current * band in newReg */ pixman_box16_t * r1BandEnd; /* End of current band in r1 */ pixman_box16_t * r2BandEnd; /* End of current band in r2 */ short top; /* Top of non-overlapping band */ short bot; /* Bottom of non-overlapping band*/ int r1y1; /* Temps for r1->y1 and r2->y1 */ int r2y1; int newSize; int numRects; /* * Break any region computed from a broken region */ if (PIXREGION_NAR (reg1) || PIXREGION_NAR(reg2)) return pixman_break (newReg); /* * Initialization: * set r1, r2, r1End and r2End appropriately, save the rectangles * of the destination region until the end in case it's one of * the two source regions, then mark the "new" region empty, allocating * another array of rectangles for it to use. */ r1 = PIXREGION_RECTS(reg1); newSize = PIXREGION_NUM_RECTS(reg1); r1End = r1 + newSize; numRects = PIXREGION_NUM_RECTS(reg2); r2 = PIXREGION_RECTS(reg2); r2End = r2 + numRects; assert(r1 != r1End); assert(r2 != r2End); oldData = (pixman_region16_data_t *)NULL; if (((newReg == reg1) && (newSize > 1)) || ((newReg == reg2) && (numRects > 1))) { oldData = newReg->data; newReg->data = &pixman_region_emptyData; } /* guess at new size */ if (numRects > newSize) newSize = numRects; newSize <<= 1; if (!newReg->data) newReg->data = &pixman_region_emptyData; else if (newReg->data->size) newReg->data->numRects = 0; if (newSize > newReg->data->size) if (!pixman_rect_alloc(newReg, newSize)) return PIXMAN_REGION_STATUS_FAILURE; /* * Initialize ybot. * In the upcoming loop, ybot and ytop serve different functions depending * on whether the band being handled is an overlapping or non-overlapping * band. * In the case of a non-overlapping band (only one of the regions * has points in the band), ybot is the bottom of the most recent * intersection and thus clips the top of the rectangles in that band. * ytop is the top of the next intersection between the two regions and * serves to clip the bottom of the rectangles in the current band. * For an overlapping band (where the two regions intersect), ytop clips * the top of the rectangles of both regions and ybot clips the bottoms. */ ybot = MIN(r1->y1, r2->y1); /* * prevBand serves to mark the start of the previous band so rectangles * can be coalesced into larger rectangles. qv. pixman_coalesce, above. * In the beginning, there is no previous band, so prevBand == curBand * (curBand is set later on, of course, but the first band will always * start at index 0). prevBand and curBand must be indices because of * the possible expansion, and resultant moving, of the new region's * array of rectangles. */ prevBand = 0; do { /* * This algorithm proceeds one source-band (as opposed to a * destination band, which is determined by where the two regions * intersect) at a time. r1BandEnd and r2BandEnd serve to mark the * rectangle after the last one in the current band for their * respective regions. */ assert(r1 != r1End); assert(r2 != r2End); FindBand(r1, r1BandEnd, r1End, r1y1); FindBand(r2, r2BandEnd, r2End, r2y1); /* * First handle the band that doesn't intersect, if any. * * Note that attention is restricted to one band in the * non-intersecting region at once, so if a region has n * bands between the current position and the next place it overlaps * the other, this entire loop will be passed through n times. */ if (r1y1 < r2y1) { if (appendNon1) { top = MAX(r1y1, ybot); bot = MIN(r1->y2, r2y1); if (top != bot) { curBand = newReg->data->numRects; pixman_region_appendNonO(newReg, r1, r1BandEnd, top, bot); Coalesce(newReg, prevBand, curBand); } } ytop = r2y1; } else if (r2y1 < r1y1) { if (appendNon2) { top = MAX(r2y1, ybot); bot = MIN(r2->y2, r1y1); if (top != bot) { curBand = newReg->data->numRects; pixman_region_appendNonO(newReg, r2, r2BandEnd, top, bot); Coalesce(newReg, prevBand, curBand); } } ytop = r1y1; } else { ytop = r1y1; } /* * Now see if we've hit an intersecting band. The two bands only * intersect if ybot > ytop */ ybot = MIN(r1->y2, r2->y2); if (ybot > ytop) { curBand = newReg->data->numRects; (* overlapFunc)(newReg, r1, r1BandEnd, r2, r2BandEnd, ytop, ybot, pOverlap); Coalesce(newReg, prevBand, curBand); } /* * If we've finished with a band (y2 == ybot) we skip forward * in the region to the next band. */ if (r1->y2 == ybot) r1 = r1BandEnd; if (r2->y2 == ybot) r2 = r2BandEnd; } while (r1 != r1End && r2 != r2End); /* * Deal with whichever region (if any) still has rectangles left. * * We only need to worry about banding and coalescing for the very first * band left. After that, we can just group all remaining boxes, * regardless of how many bands, into one final append to the list. */ if ((r1 != r1End) && appendNon1) { /* Do first nonOverlap1Func call, which may be able to coalesce */ FindBand(r1, r1BandEnd, r1End, r1y1); curBand = newReg->data->numRects; pixman_region_appendNonO(newReg, r1, r1BandEnd, MAX(r1y1, ybot), r1->y2); Coalesce(newReg, prevBand, curBand); /* Just append the rest of the boxes */ AppendRegions(newReg, r1BandEnd, r1End); } else if ((r2 != r2End) && appendNon2) { /* Do first nonOverlap2Func call, which may be able to coalesce */ FindBand(r2, r2BandEnd, r2End, r2y1); curBand = newReg->data->numRects; pixman_region_appendNonO(newReg, r2, r2BandEnd, MAX(r2y1, ybot), r2->y2); Coalesce(newReg, prevBand, curBand); /* Append rest of boxes */ AppendRegions(newReg, r2BandEnd, r2End); } if (oldData) free(oldData); if (!(numRects = newReg->data->numRects)) { freeData(newReg); newReg->data = &pixman_region_emptyData; } else if (numRects == 1) { newReg->extents = *PIXREGION_BOXPTR(newReg); freeData(newReg); newReg->data = (pixman_region16_data_t *)NULL; } else { DOWNSIZE(newReg, numRects); } return PIXMAN_REGION_STATUS_SUCCESS; } /*- *----------------------------------------------------------------------- * pixman_set_extents -- * Reset the extents of a region to what they should be. Called by * pixman_region_subtract and pixman_region_intersect as they can't figure it out along the * way or do so easily, as pixman_region_union can. * * Results: * None. * * Side Effects: * The region's 'extents' structure is overwritten. * *----------------------------------------------------------------------- */ static void pixman_set_extents (pixman_region16_t *region) { pixman_box16_t *box, *boxEnd; if (!region->data) return; if (!region->data->size) { region->extents.x2 = region->extents.x1; region->extents.y2 = region->extents.y1; return; } box = PIXREGION_BOXPTR(region); boxEnd = PIXREGION_END(region); /* * Since box is the first rectangle in the region, it must have the * smallest y1 and since boxEnd is the last rectangle in the region, * it must have the largest y2, because of banding. Initialize x1 and * x2 from box and boxEnd, resp., as good things to initialize them * to... */ region->extents.x1 = box->x1; region->extents.y1 = box->y1; region->extents.x2 = boxEnd->x2; region->extents.y2 = boxEnd->y2; assert(region->extents.y1 < region->extents.y2); while (box <= boxEnd) { if (box->x1 < region->extents.x1) region->extents.x1 = box->x1; if (box->x2 > region->extents.x2) region->extents.x2 = box->x2; box++; }; assert(region->extents.x1 < region->extents.x2); } /*====================================================================== * Region Intersection *====================================================================*/ /*- *----------------------------------------------------------------------- * pixman_region_intersectO -- * Handle an overlapping band for pixman_region_intersect. * * Results: * PIXMAN_REGION_STATUS_SUCCESS if successful. * * Side Effects: * Rectangles may be added to the region. * *----------------------------------------------------------------------- */ /*ARGSUSED*/ static pixman_region_status_t pixman_region_intersectO ( pixman_region16_t * region, pixman_box16_t * r1, pixman_box16_t * r1End, pixman_box16_t * r2, pixman_box16_t * r2End, short y1, short y2, int *pOverlap) { int x1; int x2; pixman_box16_t * pNextRect; pNextRect = PIXREGION_TOP(region); assert(y1 < y2); assert(r1 != r1End && r2 != r2End); do { x1 = MAX(r1->x1, r2->x1); x2 = MIN(r1->x2, r2->x2); /* * If there's any overlap between the two rectangles, add that * overlap to the new region. */ if (x1 < x2) NEWRECT(region, pNextRect, x1, y1, x2, y2); /* * Advance the pointer(s) with the leftmost right side, since the next * rectangle on that list may still overlap the other region's * current rectangle. */ if (r1->x2 == x2) { r1++; } if (r2->x2 == x2) { r2++; } } while ((r1 != r1End) && (r2 != r2End)); return PIXMAN_REGION_STATUS_SUCCESS; } pixman_region_status_t pixman_region_intersect(newReg, reg1, reg2) pixman_region16_t * newReg; /* destination Region */ pixman_region16_t * reg1; pixman_region16_t * reg2; /* source regions */ { good(reg1); good(reg2); good(newReg); /* check for trivial reject */ if (PIXREGION_NIL(reg1) || PIXREGION_NIL(reg2) || !EXTENTCHECK(®1->extents, ®2->extents)) { /* Covers about 20% of all cases */ freeData(newReg); newReg->extents.x2 = newReg->extents.x1; newReg->extents.y2 = newReg->extents.y1; if (PIXREGION_NAR(reg1) || PIXREGION_NAR(reg2)) { newReg->data = &pixman_brokendata; return PIXMAN_REGION_STATUS_FAILURE; } else newReg->data = &pixman_region_emptyData; } else if (!reg1->data && !reg2->data) { /* Covers about 80% of cases that aren't trivially rejected */ newReg->extents.x1 = MAX(reg1->extents.x1, reg2->extents.x1); newReg->extents.y1 = MAX(reg1->extents.y1, reg2->extents.y1); newReg->extents.x2 = MIN(reg1->extents.x2, reg2->extents.x2); newReg->extents.y2 = MIN(reg1->extents.y2, reg2->extents.y2); freeData(newReg); newReg->data = (pixman_region16_data_t *)NULL; } else if (!reg2->data && SUBSUMES(®2->extents, ®1->extents)) { return pixman_region_copy(newReg, reg1); } else if (!reg1->data && SUBSUMES(®1->extents, ®2->extents)) { return pixman_region_copy(newReg, reg2); } else if (reg1 == reg2) { return pixman_region_copy(newReg, reg1); } else { /* General purpose intersection */ int overlap; /* result ignored */ if (!pixman_op(newReg, reg1, reg2, pixman_region_intersectO, PIXMAN_REGION_STATUS_FAILURE, PIXMAN_REGION_STATUS_FAILURE, &overlap)) return PIXMAN_REGION_STATUS_FAILURE; pixman_set_extents(newReg); } good(newReg); return(PIXMAN_REGION_STATUS_SUCCESS); } #define MERGERECT(r) \ { \ if (r->x1 <= x2) { \ /* Merge with current rectangle */ \ if (r->x1 < x2) *pOverlap = PIXMAN_REGION_STATUS_SUCCESS; \ if (x2 < r->x2) x2 = r->x2; \ } else { \ /* Add current rectangle, start new one */ \ NEWRECT(region, pNextRect, x1, y1, x2, y2); \ x1 = r->x1; \ x2 = r->x2; \ } \ r++; \ } /*====================================================================== * Region Union *====================================================================*/ /*- *----------------------------------------------------------------------- * pixman_region_unionO -- * Handle an overlapping band for the union operation. Picks the * left-most rectangle each time and merges it into the region. * * Results: * PIXMAN_REGION_STATUS_SUCCESS if successful. * * Side Effects: * region is overwritten. * pOverlap is set to PIXMAN_REGION_STATUS_SUCCESS if any boxes overlap. * *----------------------------------------------------------------------- */ static pixman_region_status_t pixman_region_unionO ( pixman_region16_t *region, pixman_box16_t *r1, pixman_box16_t *r1End, pixman_box16_t *r2, pixman_box16_t *r2End, short y1, short y2, int *pOverlap) { pixman_box16_t * pNextRect; int x1; /* left and right side of current union */ int x2; assert (y1 < y2); assert(r1 != r1End && r2 != r2End); pNextRect = PIXREGION_TOP(region); /* Start off current rectangle */ if (r1->x1 < r2->x1) { x1 = r1->x1; x2 = r1->x2; r1++; } else { x1 = r2->x1; x2 = r2->x2; r2++; } while (r1 != r1End && r2 != r2End) { if (r1->x1 < r2->x1) MERGERECT(r1) else MERGERECT(r2); } /* Finish off whoever (if any) is left */ if (r1 != r1End) { do { MERGERECT(r1); } while (r1 != r1End); } else if (r2 != r2End) { do { MERGERECT(r2); } while (r2 != r2End); } /* Add current rectangle */ NEWRECT(region, pNextRect, x1, y1, x2, y2); return PIXMAN_REGION_STATUS_SUCCESS; } /* Convenience function for performing union of region with a single rectangle */ pixman_region_status_t pixman_region_union_rect(pixman_region16_t *dest, pixman_region16_t *source, int x, int y, unsigned int width, unsigned int height) { pixman_region16_t region; if (!width || !height) return pixman_region_copy (dest, source); region.data = NULL; region.extents.x1 = x; region.extents.y1 = y; region.extents.x2 = x + width; region.extents.y2 = y + height; return pixman_region_union (dest, source, ®ion); } pixman_region_status_t pixman_region_union(pixman_region16_t *newReg, pixman_region16_t *reg1, pixman_region16_t *reg2) { int overlap; /* result ignored */ /* Return PIXMAN_REGION_STATUS_SUCCESS if some overlap between reg1, reg2 */ good(reg1); good(reg2); good(newReg); /* checks all the simple cases */ /* * Region 1 and 2 are the same */ if (reg1 == reg2) { return pixman_region_copy(newReg, reg1); } /* * Region 1 is empty */ if (PIXREGION_NIL(reg1)) { if (PIXREGION_NAR(reg1)) return pixman_break (newReg); if (newReg != reg2) return pixman_region_copy(newReg, reg2); return PIXMAN_REGION_STATUS_SUCCESS; } /* * Region 2 is empty */ if (PIXREGION_NIL(reg2)) { if (PIXREGION_NAR(reg2)) return pixman_break (newReg); if (newReg != reg1) return pixman_region_copy(newReg, reg1); return PIXMAN_REGION_STATUS_SUCCESS; } /* * Region 1 completely subsumes region 2 */ if (!reg1->data && SUBSUMES(®1->extents, ®2->extents)) { if (newReg != reg1) return pixman_region_copy(newReg, reg1); return PIXMAN_REGION_STATUS_SUCCESS; } /* * Region 2 completely subsumes region 1 */ if (!reg2->data && SUBSUMES(®2->extents, ®1->extents)) { if (newReg != reg2) return pixman_region_copy(newReg, reg2); return PIXMAN_REGION_STATUS_SUCCESS; } if (!pixman_op(newReg, reg1, reg2, pixman_region_unionO, PIXMAN_REGION_STATUS_SUCCESS, PIXMAN_REGION_STATUS_SUCCESS, &overlap)) return PIXMAN_REGION_STATUS_FAILURE; newReg->extents.x1 = MIN(reg1->extents.x1, reg2->extents.x1); newReg->extents.y1 = MIN(reg1->extents.y1, reg2->extents.y1); newReg->extents.x2 = MAX(reg1->extents.x2, reg2->extents.x2); newReg->extents.y2 = MAX(reg1->extents.y2, reg2->extents.y2); good(newReg); return PIXMAN_REGION_STATUS_SUCCESS; } slim_hidden_def(pixman_region_union); /*====================================================================== * Batch Rectangle Union *====================================================================*/ /*- *----------------------------------------------------------------------- * pixman_region_append -- * * "Append" the rgn rectangles onto the end of dstrgn, maintaining * knowledge of YX-banding when it's easy. Otherwise, dstrgn just * becomes a non-y-x-banded random collection of rectangles, and not * yet a true region. After a sequence of appends, the caller must * call pixman_region_validate to ensure that a valid region is constructed. * * Results: * PIXMAN_REGION_STATUS_SUCCESS if successful. * * Side Effects: * dstrgn is modified if rgn has rectangles. * */ pixman_region_status_t pixman_region_append(dstrgn, rgn) pixman_region16_t * dstrgn; pixman_region16_t * rgn; { int numRects, dnumRects, size; pixman_box16_t *new, *old; int prepend; if (PIXREGION_NAR(rgn)) return pixman_break (dstrgn); if (!rgn->data && (dstrgn->data == &pixman_region_emptyData)) { dstrgn->extents = rgn->extents; dstrgn->data = (pixman_region16_data_t *)NULL; return PIXMAN_REGION_STATUS_SUCCESS; } numRects = PIXREGION_NUM_RECTS(rgn); if (!numRects) return PIXMAN_REGION_STATUS_SUCCESS; prepend = PIXMAN_REGION_STATUS_FAILURE; size = numRects; dnumRects = PIXREGION_NUM_RECTS(dstrgn); if (!dnumRects && (size < 200)) size = 200; /* XXX pick numbers out of a hat */ RECTALLOC(dstrgn, size); old = PIXREGION_RECTS(rgn); if (!dnumRects) dstrgn->extents = rgn->extents; else if (dstrgn->extents.x2 > dstrgn->extents.x1) { pixman_box16_t *first, *last; first = old; last = PIXREGION_BOXPTR(dstrgn) + (dnumRects - 1); if ((first->y1 > last->y2) || ((first->y1 == last->y1) && (first->y2 == last->y2) && (first->x1 > last->x2))) { if (rgn->extents.x1 < dstrgn->extents.x1) dstrgn->extents.x1 = rgn->extents.x1; if (rgn->extents.x2 > dstrgn->extents.x2) dstrgn->extents.x2 = rgn->extents.x2; dstrgn->extents.y2 = rgn->extents.y2; } else { first = PIXREGION_BOXPTR(dstrgn); last = old + (numRects - 1); if ((first->y1 > last->y2) || ((first->y1 == last->y1) && (first->y2 == last->y2) && (first->x1 > last->x2))) { prepend = PIXMAN_REGION_STATUS_SUCCESS; if (rgn->extents.x1 < dstrgn->extents.x1) dstrgn->extents.x1 = rgn->extents.x1; if (rgn->extents.x2 > dstrgn->extents.x2) dstrgn->extents.x2 = rgn->extents.x2; dstrgn->extents.y1 = rgn->extents.y1; } else dstrgn->extents.x2 = dstrgn->extents.x1; } } if (prepend) { new = PIXREGION_BOX(dstrgn, numRects); if (dnumRects == 1) *new = *PIXREGION_BOXPTR(dstrgn); else memmove((char *)new,(char *)PIXREGION_BOXPTR(dstrgn), dnumRects * sizeof(pixman_box16_t)); new = PIXREGION_BOXPTR(dstrgn); } else new = PIXREGION_BOXPTR(dstrgn) + dnumRects; if (numRects == 1) *new = *old; else memmove((char *)new, (char *)old, numRects * sizeof(pixman_box16_t)); dstrgn->data->numRects += numRects; return PIXMAN_REGION_STATUS_SUCCESS; } #define ExchangeRects(a, b) \ { \ pixman_box16_t t; \ t = rects[a]; \ rects[a] = rects[b]; \ rects[b] = t; \ } static void QuickSortRects( pixman_box16_t rects[], int numRects) { int y1; int x1; int i, j; pixman_box16_t *r; /* Always called with numRects > 1 */ do { if (numRects == 2) { if (rects[0].y1 > rects[1].y1 || (rects[0].y1 == rects[1].y1 && rects[0].x1 > rects[1].x1)) ExchangeRects(0, 1); return; } /* Choose partition element, stick in location 0 */ ExchangeRects(0, numRects >> 1); y1 = rects[0].y1; x1 = rects[0].x1; /* Partition array */ i = 0; j = numRects; do { r = &(rects[i]); do { r++; i++; } while (i != numRects && (r->y1 < y1 || (r->y1 == y1 && r->x1 < x1))); r = &(rects[j]); do { r--; j--; } while (y1 < r->y1 || (y1 == r->y1 && x1 < r->x1)); if (i < j) ExchangeRects(i, j); } while (i < j); /* Move partition element back to middle */ ExchangeRects(0, j); /* Recurse */ if (numRects-j-1 > 1) QuickSortRects(&rects[j+1], numRects-j-1); numRects = j; } while (numRects > 1); } /*- *----------------------------------------------------------------------- * pixman_region_validate -- * * Take a ``region'' which is a non-y-x-banded random collection of * rectangles, and compute a nice region which is the union of all the * rectangles. * * Results: * PIXMAN_REGION_STATUS_SUCCESS if successful. * * Side Effects: * The passed-in ``region'' may be modified. * pOverlap set to PIXMAN_REGION_STATUS_SUCCESS if any retangles overlapped, else PIXMAN_REGION_STATUS_FAILURE; * * Strategy: * Step 1. Sort the rectangles into ascending order with primary key y1 * and secondary key x1. * * Step 2. Split the rectangles into the minimum number of proper y-x * banded regions. This may require horizontally merging * rectangles, and vertically coalescing bands. With any luck, * this step in an identity tranformation (ala the Box widget), * or a coalescing into 1 box (ala Menus). * * Step 3. Merge the separate regions down to a single region by calling * pixman_region_union. Maximize the work each pixman_region_union call does by using * a binary merge. * *----------------------------------------------------------------------- */ pixman_region_status_t pixman_region_validate(badreg, pOverlap) pixman_region16_t * badreg; int *pOverlap; { /* Descriptor for regions under construction in Step 2. */ typedef struct { pixman_region16_t reg; int prevBand; int curBand; } RegionInfo; int numRects; /* Original numRects for badreg */ RegionInfo *ri; /* Array of current regions */ int numRI; /* Number of entries used in ri */ int sizeRI; /* Number of entries available in ri */ int i; /* Index into rects */ int j; /* Index into ri */ RegionInfo *rit; /* &ri[j] */ pixman_region16_t * reg; /* ri[j].reg */ pixman_box16_t * box; /* Current box in rects */ pixman_box16_t * riBox; /* Last box in ri[j].reg */ pixman_region16_t * hreg; /* ri[j_half].reg */ int ret = PIXMAN_REGION_STATUS_SUCCESS; *pOverlap = PIXMAN_REGION_STATUS_FAILURE; if (!badreg->data) { good(badreg); return PIXMAN_REGION_STATUS_SUCCESS; } numRects = badreg->data->numRects; if (!numRects) { if (PIXREGION_NAR(badreg)) return PIXMAN_REGION_STATUS_FAILURE; good(badreg); return PIXMAN_REGION_STATUS_SUCCESS; } if (badreg->extents.x1 < badreg->extents.x2) { if ((numRects) == 1) { freeData(badreg); badreg->data = (pixman_region16_data_t *) NULL; } else { DOWNSIZE(badreg, numRects); } good(badreg); return PIXMAN_REGION_STATUS_SUCCESS; } /* Step 1: Sort the rects array into ascending (y1, x1) order */ QuickSortRects(PIXREGION_BOXPTR(badreg), numRects); /* Step 2: Scatter the sorted array into the minimum number of regions */ /* Set up the first region to be the first rectangle in badreg */ /* Note that step 2 code will never overflow the ri[0].reg rects array */ ri = (RegionInfo *) malloc(4 * sizeof(RegionInfo)); if (!ri) return pixman_break (badreg); sizeRI = 4; numRI = 1; ri[0].prevBand = 0; ri[0].curBand = 0; ri[0].reg = *badreg; box = PIXREGION_BOXPTR(&ri[0].reg); ri[0].reg.extents = *box; ri[0].reg.data->numRects = 1; /* Now scatter rectangles into the minimum set of valid regions. If the next rectangle to be added to a region would force an existing rectangle in the region to be split up in order to maintain y-x banding, just forget it. Try the next region. If it doesn't fit cleanly into any region, make a new one. */ for (i = numRects; --i > 0;) { box++; /* Look for a region to append box to */ for (j = numRI, rit = ri; --j >= 0; rit++) { reg = &rit->reg; riBox = PIXREGION_END(reg); if (box->y1 == riBox->y1 && box->y2 == riBox->y2) { /* box is in same band as riBox. Merge or append it */ if (box->x1 <= riBox->x2) { /* Merge it with riBox */ if (box->x1 < riBox->x2) *pOverlap = PIXMAN_REGION_STATUS_SUCCESS; if (box->x2 > riBox->x2) riBox->x2 = box->x2; } else { RECTALLOC_BAIL(reg, 1, bail); *PIXREGION_TOP(reg) = *box; reg->data->numRects++; } goto NextRect; /* So sue me */ } else if (box->y1 >= riBox->y2) { /* Put box into new band */ if (reg->extents.x2 < riBox->x2) reg->extents.x2 = riBox->x2; if (reg->extents.x1 > box->x1) reg->extents.x1 = box->x1; Coalesce(reg, rit->prevBand, rit->curBand); rit->curBand = reg->data->numRects; RECTALLOC_BAIL(reg, 1, bail); *PIXREGION_TOP(reg) = *box; reg->data->numRects++; goto NextRect; } /* Well, this region was inappropriate. Try the next one. */ } /* for j */ /* Uh-oh. No regions were appropriate. Create a new one. */ if (sizeRI == numRI) { /* Oops, allocate space for new region information */ sizeRI <<= 1; rit = (RegionInfo *) realloc(ri, sizeRI * sizeof(RegionInfo)); if (!rit) goto bail; ri = rit; rit = &ri[numRI]; } numRI++; rit->prevBand = 0; rit->curBand = 0; rit->reg.extents = *box; rit->reg.data = (pixman_region16_data_t *)NULL; if (!pixman_rect_alloc(&rit->reg, (i+numRI) / numRI)) /* MUST force allocation */ goto bail; NextRect: ; } /* for i */ /* Make a final pass over each region in order to Coalesce and set extents.x2 and extents.y2 */ for (j = numRI, rit = ri; --j >= 0; rit++) { reg = &rit->reg; riBox = PIXREGION_END(reg); reg->extents.y2 = riBox->y2; if (reg->extents.x2 < riBox->x2) reg->extents.x2 = riBox->x2; Coalesce(reg, rit->prevBand, rit->curBand); if (reg->data->numRects == 1) /* keep unions happy below */ { freeData(reg); reg->data = (pixman_region16_data_t *)NULL; } } /* Step 3: Union all regions into a single region */ while (numRI > 1) { int half = numRI/2; for (j = numRI & 1; j < (half + (numRI & 1)); j++) { reg = &ri[j].reg; hreg = &ri[j+half].reg; if (!pixman_op(reg, reg, hreg, pixman_region_unionO, PIXMAN_REGION_STATUS_SUCCESS, PIXMAN_REGION_STATUS_SUCCESS, pOverlap)) ret = PIXMAN_REGION_STATUS_FAILURE; if (hreg->extents.x1 < reg->extents.x1) reg->extents.x1 = hreg->extents.x1; if (hreg->extents.y1 < reg->extents.y1) reg->extents.y1 = hreg->extents.y1; if (hreg->extents.x2 > reg->extents.x2) reg->extents.x2 = hreg->extents.x2; if (hreg->extents.y2 > reg->extents.y2) reg->extents.y2 = hreg->extents.y2; freeData(hreg); } numRI -= half; } *badreg = ri[0].reg; free(ri); good(badreg); return ret; bail: for (i = 0; i < numRI; i++) freeData(&ri[i].reg); free (ri); return pixman_break (badreg); } /* XXX: Need to fix this to not use any X data structure pixman_region16_t * pixman_region_rectsToRegion(nrects, prect, ctype) int nrects; xRectangle *prect; int ctype; { pixman_region16_t * region; pixman_region16_data_t * pData; pixman_box16_t * box; int i; int x1, y1, x2, y2; region = pixman_region_create(NullBox, 0); if (PIXREGION_NAR (region)) return region; if (!nrects) return region; if (nrects == 1) { x1 = prect->x; y1 = prect->y; if ((x2 = x1 + (int) prect->width) > SHRT_MAX) x2 = SHRT_MAX; if ((y2 = y1 + (int) prect->height) > SHRT_MAX) y2 = SHRT_MAX; if (x1 != x2 && y1 != y2) { region->extents.x1 = x1; region->extents.y1 = y1; region->extents.x2 = x2; region->extents.y2 = y2; region->data = (pixman_region16_data_t *)NULL; } return region; } pData = allocData(nrects); if (!pData) { pixman_break (region); return region; } box = (pixman_box16_t *) (pData + 1); for (i = nrects; --i >= 0; prect++) { x1 = prect->x; y1 = prect->y; if ((x2 = x1 + (int) prect->width) > SHRT_MAX) x2 = SHRT_MAX; if ((y2 = y1 + (int) prect->height) > SHRT_MAX) y2 = SHRT_MAX; if (x1 != x2 && y1 != y2) { box->x1 = x1; box->y1 = y1; box->x2 = x2; box->y2 = y2; box++; } } if (box != (pixman_box16_t *) (pData + 1)) { pData->size = nrects; pData->numRects = box - (pixman_box16_t *) (pData + 1); region->data = pData; if (ctype != CT_YXBANDED) { int overlap; region->extents.x1 = region->extents.x2 = 0; pixman_region_validate(region, &overlap); } else pixman_set_extents(region); good(region); } else { free (pData); } return region; } */ /*====================================================================== * Region Subtraction *====================================================================*/ /*- *----------------------------------------------------------------------- * pixman_region_subtractO -- * Overlapping band subtraction. x1 is the left-most point not yet * checked. * * Results: * PIXMAN_REGION_STATUS_SUCCESS if successful. * * Side Effects: * region may have rectangles added to it. * *----------------------------------------------------------------------- */ /*ARGSUSED*/ static pixman_region_status_t pixman_region_subtractO ( pixman_region16_t * region, pixman_box16_t * r1, pixman_box16_t * r1End, pixman_box16_t * r2, pixman_box16_t * r2End, short y1, short y2, int *pOverlap) { pixman_box16_t * pNextRect; int x1; x1 = r1->x1; assert(y1x2 <= x1) { /* * Subtrahend entirely to left of minuend: go to next subtrahend. */ r2++; } else if (r2->x1 <= x1) { /* * Subtrahend preceeds minuend: nuke left edge of minuend. */ x1 = r2->x2; if (x1 >= r1->x2) { /* * Minuend completely covered: advance to next minuend and * reset left fence to edge of new minuend. */ r1++; if (r1 != r1End) x1 = r1->x1; } else { /* * Subtrahend now used up since it doesn't extend beyond * minuend */ r2++; } } else if (r2->x1 < r1->x2) { /* * Left part of subtrahend covers part of minuend: add uncovered * part of minuend to region and skip to next subtrahend. */ assert(x1x1); NEWRECT(region, pNextRect, x1, y1, r2->x1, y2); x1 = r2->x2; if (x1 >= r1->x2) { /* * Minuend used up: advance to new... */ r1++; if (r1 != r1End) x1 = r1->x1; } else { /* * Subtrahend used up */ r2++; } } else { /* * Minuend used up: add any remaining piece before advancing. */ if (r1->x2 > x1) NEWRECT(region, pNextRect, x1, y1, r1->x2, y2); r1++; if (r1 != r1End) x1 = r1->x1; } } while ((r1 != r1End) && (r2 != r2End)); /* * Add remaining minuend rectangles to region. */ while (r1 != r1End) { assert(x1x2); NEWRECT(region, pNextRect, x1, y1, r1->x2, y2); r1++; if (r1 != r1End) x1 = r1->x1; } return PIXMAN_REGION_STATUS_SUCCESS; } /*- *----------------------------------------------------------------------- * pixman_region_subtract -- * Subtract regS from regM and leave the result in regD. * S stands for subtrahend, M for minuend and D for difference. * * Results: * PIXMAN_REGION_STATUS_SUCCESS if successful. * * Side Effects: * regD is overwritten. * *----------------------------------------------------------------------- */ pixman_region_status_t pixman_region_subtract(regD, regM, regS) pixman_region16_t * regD; pixman_region16_t * regM; pixman_region16_t * regS; { int overlap; /* result ignored */ good(regM); good(regS); good(regD); /* check for trivial rejects */ if (PIXREGION_NIL(regM) || PIXREGION_NIL(regS) || !EXTENTCHECK(®M->extents, ®S->extents)) { if (PIXREGION_NAR (regS)) return pixman_break (regD); return pixman_region_copy(regD, regM); } else if (regM == regS) { freeData(regD); regD->extents.x2 = regD->extents.x1; regD->extents.y2 = regD->extents.y1; regD->data = &pixman_region_emptyData; return PIXMAN_REGION_STATUS_SUCCESS; } /* Add those rectangles in region 1 that aren't in region 2, do yucky substraction for overlaps, and just throw away rectangles in region 2 that aren't in region 1 */ if (!pixman_op(regD, regM, regS, pixman_region_subtractO, PIXMAN_REGION_STATUS_SUCCESS, PIXMAN_REGION_STATUS_FAILURE, &overlap)) return PIXMAN_REGION_STATUS_FAILURE; /* * Can't alter RegD's extents before we call pixman_op because * it might be one of the source regions and pixman_op depends * on the extents of those regions being unaltered. Besides, this * way there's no checking against rectangles that will be nuked * due to coalescing, so we have to examine fewer rectangles. */ pixman_set_extents(regD); good(regD); return PIXMAN_REGION_STATUS_SUCCESS; } /*====================================================================== * Region Inversion *====================================================================*/ /*- *----------------------------------------------------------------------- * pixman_region_inverse -- * Take a region and a box and return a region that is everything * in the box but not in the region. The careful reader will note * that this is the same as subtracting the region from the box... * * Results: * PIXMAN_REGION_STATUS_SUCCESS. * * Side Effects: * newReg is overwritten. * *----------------------------------------------------------------------- */ pixman_region_status_t pixman_region_inverse(newReg, reg1, invRect) pixman_region16_t * newReg; /* Destination region */ pixman_region16_t * reg1; /* Region to invert */ pixman_box16_t * invRect; /* Bounding box for inversion */ { pixman_region16_t invReg; /* Quick and dirty region made from the * bounding box */ int overlap; /* result ignored */ good(reg1); good(newReg); /* check for trivial rejects */ if (PIXREGION_NIL(reg1) || !EXTENTCHECK(invRect, ®1->extents)) { if (PIXREGION_NAR(reg1)) return pixman_break (newReg); newReg->extents = *invRect; freeData(newReg); newReg->data = (pixman_region16_data_t *)NULL; return PIXMAN_REGION_STATUS_SUCCESS; } /* Add those rectangles in region 1 that aren't in region 2, do yucky substraction for overlaps, and just throw away rectangles in region 2 that aren't in region 1 */ invReg.extents = *invRect; invReg.data = (pixman_region16_data_t *)NULL; if (!pixman_op(newReg, &invReg, reg1, pixman_region_subtractO, PIXMAN_REGION_STATUS_SUCCESS, PIXMAN_REGION_STATUS_FAILURE, &overlap)) return PIXMAN_REGION_STATUS_FAILURE; /* * Can't alter newReg's extents before we call pixman_op because * it might be one of the source regions and pixman_op depends * on the extents of those regions being unaltered. Besides, this * way there's no checking against rectangles that will be nuked * due to coalescing, so we have to examine fewer rectangles. */ pixman_set_extents(newReg); good(newReg); return PIXMAN_REGION_STATUS_SUCCESS; } /* * RectIn(region, rect) * This routine takes a pointer to a region and a pointer to a box * and determines if the box is outside/inside/partly inside the region. * * The idea is to travel through the list of rectangles trying to cover the * passed box with them. Anytime a piece of the rectangle isn't covered * by a band of rectangles, partOut is set PIXMAN_REGION_STATUS_SUCCESS. Any time a rectangle in * the region covers part of the box, partIn is set PIXMAN_REGION_STATUS_SUCCESS. The process ends * when either the box has been completely covered (we reached a band that * doesn't overlap the box, partIn is PIXMAN_REGION_STATUS_SUCCESS and partOut is false), the * box has been partially covered (partIn == partOut == PIXMAN_REGION_STATUS_SUCCESS -- because of * the banding, the first time this is true we know the box is only * partially in the region) or is outside the region (we reached a band * that doesn't overlap the box at all and partIn is false) */ int pixman_region_contains_rectangle(region, prect) pixman_region16_t * region; pixman_box16_t * prect; { int x; int y; pixman_box16_t * pbox; pixman_box16_t * pboxEnd; int partIn, partOut; int numRects; good(region); numRects = PIXREGION_NUM_RECTS(region); /* useful optimization */ if (!numRects || !EXTENTCHECK(®ion->extents, prect)) return(rgnOUT); if (numRects == 1) { /* We know that it must be rgnIN or rgnPART */ if (SUBSUMES(®ion->extents, prect)) return(rgnIN); else return(rgnPART); } partOut = PIXMAN_REGION_STATUS_FAILURE; partIn = PIXMAN_REGION_STATUS_FAILURE; /* (x,y) starts at upper left of rect, moving to the right and down */ x = prect->x1; y = prect->y1; /* can stop when both partOut and partIn are PIXMAN_REGION_STATUS_SUCCESS, or we reach prect->y2 */ for (pbox = PIXREGION_BOXPTR(region), pboxEnd = pbox + numRects; pbox != pboxEnd; pbox++) { if (pbox->y2 <= y) continue; /* getting up to speed or skipping remainder of band */ if (pbox->y1 > y) { partOut = PIXMAN_REGION_STATUS_SUCCESS; /* missed part of rectangle above */ if (partIn || (pbox->y1 >= prect->y2)) break; y = pbox->y1; /* x guaranteed to be == prect->x1 */ } if (pbox->x2 <= x) continue; /* not far enough over yet */ if (pbox->x1 > x) { partOut = PIXMAN_REGION_STATUS_SUCCESS; /* missed part of rectangle to left */ if (partIn) break; } if (pbox->x1 < prect->x2) { partIn = PIXMAN_REGION_STATUS_SUCCESS; /* definitely overlap */ if (partOut) break; } if (pbox->x2 >= prect->x2) { y = pbox->y2; /* finished with this band */ if (y >= prect->y2) break; x = prect->x1; /* reset x out to left again */ } else { /* * Because boxes in a band are maximal width, if the first box * to overlap the rectangle doesn't completely cover it in that * band, the rectangle must be partially out, since some of it * will be uncovered in that band. partIn will have been set true * by now... */ partOut = PIXMAN_REGION_STATUS_SUCCESS; break; } } return(partIn ? ((y < prect->y2) ? rgnPART : rgnIN) : rgnOUT); } /* pixman_region_translate (region, x, y) translates in place */ void pixman_region_translate (pixman_region16_t * region, int x, int y) { int x1, x2, y1, y2; int nbox; pixman_box16_t * pbox; good(region); region->extents.x1 = x1 = region->extents.x1 + x; region->extents.y1 = y1 = region->extents.y1 + y; region->extents.x2 = x2 = region->extents.x2 + x; region->extents.y2 = y2 = region->extents.y2 + y; if (((x1 - SHRT_MIN)|(y1 - SHRT_MIN)|(SHRT_MAX - x2)|(SHRT_MAX - y2)) >= 0) { if (region->data && (nbox = region->data->numRects)) { for (pbox = PIXREGION_BOXPTR(region); nbox--; pbox++) { pbox->x1 += x; pbox->y1 += y; pbox->x2 += x; pbox->y2 += y; } } return; } if (((x2 - SHRT_MIN)|(y2 - SHRT_MIN)|(SHRT_MAX - x1)|(SHRT_MAX - y1)) <= 0) { region->extents.x2 = region->extents.x1; region->extents.y2 = region->extents.y1; freeData(region); region->data = &pixman_region_emptyData; return; } if (x1 < SHRT_MIN) region->extents.x1 = SHRT_MIN; else if (x2 > SHRT_MAX) region->extents.x2 = SHRT_MAX; if (y1 < SHRT_MIN) region->extents.y1 = SHRT_MIN; else if (y2 > SHRT_MAX) region->extents.y2 = SHRT_MAX; if (region->data && (nbox = region->data->numRects)) { pixman_box16_t * pboxout; for (pboxout = pbox = PIXREGION_BOXPTR(region); nbox--; pbox++) { pboxout->x1 = x1 = pbox->x1 + x; pboxout->y1 = y1 = pbox->y1 + y; pboxout->x2 = x2 = pbox->x2 + x; pboxout->y2 = y2 = pbox->y2 + y; if (((x2 - SHRT_MIN)|(y2 - SHRT_MIN)| (SHRT_MAX - x1)|(SHRT_MAX - y1)) <= 0) { region->data->numRects--; continue; } if (x1 < SHRT_MIN) pboxout->x1 = SHRT_MIN; else if (x2 > SHRT_MAX) pboxout->x2 = SHRT_MAX; if (y1 < SHRT_MIN) pboxout->y1 = SHRT_MIN; else if (y2 > SHRT_MAX) pboxout->y2 = SHRT_MAX; pboxout++; } if (pboxout != pbox) { if (region->data->numRects == 1) { region->extents = *PIXREGION_BOXPTR(region); freeData(region); region->data = (pixman_region16_data_t *)NULL; } else pixman_set_extents(region); } } } /* XXX: Do we need this? static pixman_region_status_t pixman_region16_data_copy(pixman_region16_t * dst, pixman_region16_t * src) { good(dst); good(src); if (dst->data) return PIXMAN_REGION_STATUS_SUCCESS; if (dst == src) return PIXMAN_REGION_STATUS_SUCCESS; if (!src->data || !src->data->size) { freeData(dst); dst->data = (pixman_region16_data_t *)NULL; return PIXMAN_REGION_STATUS_SUCCESS; } if (!dst->data || (dst->data->size < src->data->numRects)) { freeData(dst); dst->data = allocData(src->data->numRects); if (!dst->data) return pixman_break (dst); } dst->data->size = src->data->size; dst->data->numRects = src->data->numRects; return PIXMAN_REGION_STATUS_SUCCESS; } */ void pixman_region_reset(pixman_region16_t *region, pixman_box16_t *box) { good(region); assert(box->x1<=box->x2); assert(box->y1<=box->y2); region->extents = *box; freeData(region); region->data = (pixman_region16_data_t *)NULL; } int pixman_region_contains_point(region, x, y, box) pixman_region16_t * region; int x, y; pixman_box16_t * box; /* "return" value */ { pixman_box16_t *pbox, *pboxEnd; int numRects; good(region); numRects = PIXREGION_NUM_RECTS(region); if (!numRects || !INBOX(®ion->extents, x, y)) return(PIXMAN_REGION_STATUS_FAILURE); if (numRects == 1) { *box = region->extents; return(PIXMAN_REGION_STATUS_SUCCESS); } for (pbox = PIXREGION_BOXPTR(region), pboxEnd = pbox + numRects; pbox != pboxEnd; pbox++) { if (y >= pbox->y2) continue; /* not there yet */ if ((y < pbox->y1) || (x < pbox->x1)) break; /* missed it */ if (x >= pbox->x2) continue; /* not there yet */ *box = *pbox; return(PIXMAN_REGION_STATUS_SUCCESS); } return(PIXMAN_REGION_STATUS_FAILURE); } int pixman_region_not_empty(region) pixman_region16_t * region; { good(region); return(!PIXREGION_NIL(region)); } /* XXX: Do we need this? static int pixman_region16_broken(pixman_region16_t * region) { good(region); return (PIXREGION_NAR(region)); } */ void pixman_region_empty(region) pixman_region16_t * region; { good(region); freeData(region); region->extents.x2 = region->extents.x1; region->extents.y2 = region->extents.y1; region->data = &pixman_region_emptyData; } pixman_box16_t * pixman_region_extents(region) pixman_region16_t * region; { good(region); return(®ion->extents); } #define ExchangeSpans(a, b) \ { \ pixman_region16_point_t tpt; \ int tw; \ \ tpt = spans[a]; spans[a] = spans[b]; spans[b] = tpt; \ tw = widths[a]; widths[a] = widths[b]; widths[b] = tw; \ } /* ||| I should apply the merge sort code to rectangle sorting above, and see if mapping time can be improved. But right now I've been at work 12 hours, so forget it. */ static void QuickSortSpans( pixman_region16_point_t spans[], int widths[], int numSpans) { int y; int i, j, m; pixman_region16_point_t *r; /* Always called with numSpans > 1 */ /* Sorts only by y, doesn't bother to sort by x */ do { if (numSpans < 9) { /* Do insertion sort */ int yprev; yprev = spans[0].y; i = 1; do { /* while i != numSpans */ y = spans[i].y; if (yprev > y) { /* spans[i] is out of order. Move into proper location. */ pixman_region16_point_t tpt; int tw, k; for (j = 0; y >= spans[j].y; j++) {} tpt = spans[i]; tw = widths[i]; for (k = i; k != j; k--) { spans[k] = spans[k-1]; widths[k] = widths[k-1]; } spans[j] = tpt; widths[j] = tw; y = spans[i].y; } /* if out of order */ yprev = y; i++; } while (i != numSpans); return; } /* Choose partition element, stick in location 0 */ m = numSpans / 2; if (spans[m].y > spans[0].y) ExchangeSpans(m, 0); if (spans[m].y > spans[numSpans-1].y) ExchangeSpans(m, numSpans-1); if (spans[m].y > spans[0].y) ExchangeSpans(m, 0); y = spans[0].y; /* Partition array */ i = 0; j = numSpans; do { r = &(spans[i]); do { r++; i++; } while (i != numSpans && r->y < y); r = &(spans[j]); do { r--; j--; } while (y < r->y); if (i < j) ExchangeSpans(i, j); } while (i < j); /* Move partition element back to middle */ ExchangeSpans(0, j); /* Recurse */ if (numSpans-j-1 > 1) QuickSortSpans(&spans[j+1], &widths[j+1], numSpans-j-1); numSpans = j; } while (numSpans > 1); } #define NextBand() \ { \ clipy1 = pboxBandStart->y1; \ clipy2 = pboxBandStart->y2; \ pboxBandEnd = pboxBandStart + 1; \ while (pboxBandEnd != pboxLast && pboxBandEnd->y1 == clipy1) { \ pboxBandEnd++; \ } \ for (; ppt != pptLast && ppt->y < clipy1; ppt++, pwidth++) {} \ } /* Clip a list of scanlines to a region. The caller has allocated the space. FSorted is non-zero if the scanline origins are in ascending order. returns the number of new, clipped scanlines. */ #ifdef XXX_DO_WE_NEED_THIS static int pixman_region16_clip_spans( pixman_region16_t *prgnDst, pixman_region16_point_t *ppt, int *pwidth, int nspans, pixman_region16_point_t *pptNew, int *pwidthNew, int fSorted) { pixman_region16_point_t *pptLast; int *pwidthNewStart; /* the vengeance of Xerox! */ int y, x1, x2; int numRects; good(prgnDst); pptLast = ppt + nspans; pwidthNewStart = pwidthNew; if (!prgnDst->data) { /* Do special fast code with clip boundaries in registers(?) */ /* It doesn't pay much to make use of fSorted in this case, so we lump everything together. */ int clipx1, clipx2, clipy1, clipy2; clipx1 = prgnDst->extents.x1; clipy1 = prgnDst->extents.y1; clipx2 = prgnDst->extents.x2; clipy2 = prgnDst->extents.y2; for (; ppt != pptLast; ppt++, pwidth++) { y = ppt->y; x1 = ppt->x; if (clipy1 <= y && y < clipy2) { x2 = x1 + *pwidth; if (x1 < clipx1) x1 = clipx1; if (x2 > clipx2) x2 = clipx2; if (x1 < x2) { /* part of span in clip rectangle */ pptNew->x = x1; pptNew->y = y; *pwidthNew = x2 - x1; pptNew++; pwidthNew++; } } } /* end for */ } else if ((numRects = prgnDst->data->numRects)) { /* Have to clip against many boxes */ pixman_box16_t *pboxBandStart, *pboxBandEnd; pixman_box16_t *pbox; pixman_box16_t *pboxLast; int clipy1, clipy2; /* In this case, taking advantage of sorted spans gains more than the sorting costs. */ if ((! fSorted) && (nspans > 1)) QuickSortSpans(ppt, pwidth, nspans); pboxBandStart = PIXREGION_BOXPTR(prgnDst); pboxLast = pboxBandStart + numRects; NextBand(); for (; ppt != pptLast; ) { y = ppt->y; if (y < clipy2) { /* span is in the current band */ pbox = pboxBandStart; x1 = ppt->x; x2 = x1 + *pwidth; do { /* For each box in band */ int newx1, newx2; newx1 = x1; newx2 = x2; if (newx1 < pbox->x1) newx1 = pbox->x1; if (newx2 > pbox->x2) newx2 = pbox->x2; if (newx1 < newx2) { /* Part of span in clip rectangle */ pptNew->x = newx1; pptNew->y = y; *pwidthNew = newx2 - newx1; pptNew++; pwidthNew++; } pbox++; } while (pbox != pboxBandEnd); ppt++; pwidth++; } else { /* Move to next band, adjust ppt as needed */ pboxBandStart = pboxBandEnd; if (pboxBandStart == pboxLast) break; /* We're completely done */ NextBand(); } } } return (pwidthNew - pwidthNewStart); } /* find the band in a region with the most rectangles */ static int pixman_region16_find_max_band(pixman_region16_t * prgn) { int nbox; pixman_box16_t * pbox; int nThisBand; int nMaxBand = 0; short yThisBand; good(prgn); nbox = PIXREGION_NUM_RECTS(prgn); pbox = PIXREGION_RECTS(prgn); while(nbox > 0) { yThisBand = pbox->y1; nThisBand = 0; while((nbox > 0) && (pbox->y1 == yThisBand)) { nbox--; pbox++; nThisBand++; } if (nThisBand > nMaxBand) nMaxBand = nThisBand; } return (nMaxBand); } #endif /* XXX_DO_WE_NEED_THIS */