HP_MFP_SmartCardReader.txt [plain text]
idVendor: 0x03F0
iManufacturer: Hewlett Packard
idProduct: 0x2924
iProduct: MFP Smart Card Reader
bcdDevice: 5.25 (firmware release?)
bLength: 9
bDescriptorType: 4
bInterfaceNumber: 0
bAlternateSetting: 0
bNumEndpoints: 3
bulk-IN, bulk-OUT and Interrupt-IN
bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
bInterfaceSubClass: 0
bInterfaceProtocol: 0
bulk transfer, optional interrupt-IN (CCID)
iInterface: 4
CCID Class Descriptor
bLength: 0x36
bDescriptorType: 0x21
bcdCCID: 1.00
bMaxSlotIndex: 0x00
bVoltageSupport: 0x01
5.0V
dwProtocols: 0x0000 0x0003
T=0
T=1
dwDefaultClock: 4.000 MHz
dwMaximumClock: 8.000 MHz
bNumClockSupported: 0 (will use whatever is returned)
IFD does not support GET CLOCK FREQUENCIES request: Broken pipe
dwDataRate: 10753 bps
dwMaxDataRate: 344105 bps
bNumDataRatesSupported: 0 (will use whatever is returned)
IFD does not support GET_DATA_RATES request: Broken pipe
dwMaxIFSD: 252
dwSynchProtocols: 0x00000000
dwMechanical: 0x00000000
No special characteristics
dwFeatures: 0x000100BA
....02 Automatic parameter configuration based on ATR data
....08 Automatic ICC voltage selection
....10 Automatic ICC clock frequency change according to parameters
....20 Automatic baud rate change according to frequency and Fi, Di params
....80 Automatic PPS made by the CCID
01.... TPDU level exchange
dwMaxCCIDMessageLength: 271 bytes
bClassGetResponse: 0xFF
echoes the APDU class
bClassEnveloppe: 0xFF
echoes the APDU class
wLcdLayout: 0x0000
bPINSupport: 0x00
bMaxCCIDBusySlots: 1