CherrySmartTerminalST2XXX.txt [plain text]
idVendor: 0x046A
iManufacturer: Cherry GmbH
idProduct: 0x003E
iProduct: SmartTerminal ST-2xxx
bcdDevice: 5.08 (firmware release?)
bLength: 9
bDescriptorType: 4
bInterfaceNumber: 0
bAlternateSetting: 0
bNumEndpoints: 3
bInterfaceClass: 0xFF
NOT A CCID DEVICE
Class is 0xFF (proprietary)
bInterfaceSubClass: 0
bInterfaceProtocol: 0
iInterface: 4
CCID Class Descriptor
bLength: 0x36
bDescriptorType: 0x21
bcdCCID: 1.00
bMaxSlotIndex: 0x00
bVoltageSupport: 0x01
5.0V
dwProtocols: 0x0000 0x0003
T=0
T=1
dwDefaultClock: 4.000 MHz
dwMaximumClock: 8.000 MHz
bNumClockSupported: 0 (will use whatever is returned)
IFD does not support GET CLOCK FREQUENCIES request
dwDataRate: 10753 bps
dwMaxDataRate: 344105 bps
bNumDataRatesSupported: 0 (will use whatever is returned)
IFD does not support GET_DATA_RATES request
dwMaxIFSD: 252
dwSynchProtocols: 0x00000000
dwMechanical: 0x00000000
No special characteristics
dwFeatures: 0x000100BA
....02 Automatic parameter configuration based on ATR data
....08 Automatic ICC voltage selection
....10 Automatic ICC clock frequency change according to parameters
....20 Automatic baud rate change according to frequency and Fi, Di params
....80 Automatic PPS made by the CCID
01.... TPDU level exchange
dwMaxCCIDMessageLength: 263 bytes
bClassGetResponse: 0xFF
echoes the APDU class
bClassEnveloppe: 0xFF
echoes the APDU class
wLcdLayout: 0x0000
bPINSupport: 0x03
PIN Verification supported
PIN Modification supported
bMaxCCIDBusySlots: 1