/* ssl/s23_srvr.c */ /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * "This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */ /* ==================================================================== * Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ #include <stdio.h> #include "ssl_locl.h" #include <openssl/buffer.h> #include <openssl/rand.h> #include <openssl/objects.h> #include <openssl/evp.h> static SSL_METHOD *ssl23_get_server_method(int ver); int ssl23_get_client_hello(SSL *s); static SSL_METHOD *ssl23_get_server_method(int ver) { #ifndef OPENSSL_NO_SSL2 if (ver == SSL2_VERSION) return(SSLv2_server_method()); #endif if (ver == SSL3_VERSION) return(SSLv3_server_method()); else if (ver == TLS1_VERSION) return(TLSv1_server_method()); else return(NULL); } SSL_METHOD *SSLv23_server_method(void) { static int init=1; static SSL_METHOD SSLv23_server_data; if (init) { CRYPTO_w_lock(CRYPTO_LOCK_SSL_METHOD); if (init) { memcpy((char *)&SSLv23_server_data, (char *)sslv23_base_method(),sizeof(SSL_METHOD)); SSLv23_server_data.ssl_accept=ssl23_accept; SSLv23_server_data.get_ssl_method=ssl23_get_server_method; init=0; } CRYPTO_w_unlock(CRYPTO_LOCK_SSL_METHOD); } return(&SSLv23_server_data); } int ssl23_accept(SSL *s) { BUF_MEM *buf; unsigned long Time=(unsigned long)time(NULL); void (*cb)(const SSL *ssl,int type,int val)=NULL; int ret= -1; int new_state,state; RAND_add(&Time,sizeof(Time),0); ERR_clear_error(); clear_sys_error(); if (s->info_callback != NULL) cb=s->info_callback; else if (s->ctx->info_callback != NULL) cb=s->ctx->info_callback; s->in_handshake++; if (!SSL_in_init(s) || SSL_in_before(s)) SSL_clear(s); for (;;) { state=s->state; switch(s->state) { case SSL_ST_BEFORE: case SSL_ST_ACCEPT: case SSL_ST_BEFORE|SSL_ST_ACCEPT: case SSL_ST_OK|SSL_ST_ACCEPT: s->server=1; if (cb != NULL) cb(s,SSL_CB_HANDSHAKE_START,1); /* s->version=SSL3_VERSION; */ s->type=SSL_ST_ACCEPT; if (s->init_buf == NULL) { if ((buf=BUF_MEM_new()) == NULL) { ret= -1; goto end; } if (!BUF_MEM_grow(buf,SSL3_RT_MAX_PLAIN_LENGTH)) { ret= -1; goto end; } s->init_buf=buf; } ssl3_init_finished_mac(s); s->state=SSL23_ST_SR_CLNT_HELLO_A; s->ctx->stats.sess_accept++; s->init_num=0; break; case SSL23_ST_SR_CLNT_HELLO_A: case SSL23_ST_SR_CLNT_HELLO_B: s->shutdown=0; ret=ssl23_get_client_hello(s); if (ret >= 0) cb=NULL; goto end; /* break; */ default: SSLerr(SSL_F_SSL23_ACCEPT,SSL_R_UNKNOWN_STATE); ret= -1; goto end; /* break; */ } if ((cb != NULL) && (s->state != state)) { new_state=s->state; s->state=state; cb(s,SSL_CB_ACCEPT_LOOP,1); s->state=new_state; } } end: s->in_handshake--; if (cb != NULL) cb(s,SSL_CB_ACCEPT_EXIT,ret); return(ret); } int ssl23_get_client_hello(SSL *s) { char buf_space[11]; /* Request this many bytes in initial read. * We can detect SSL 3.0/TLS 1.0 Client Hellos * ('type == 3') correctly only when the following * is in a single record, which is not guaranteed by * the protocol specification: * Byte Content * 0 type \ * 1/2 version > record header * 3/4 length / * 5 msg_type \ * 6-8 length > Client Hello message * 9/10 client_version / */ char *buf= &(buf_space[0]); unsigned char *p,*d,*d_len,*dd; unsigned int i; unsigned int csl,sil,cl; int n=0,j; int type=0; int v[2]; if (s->state == SSL23_ST_SR_CLNT_HELLO_A) { /* read the initial header */ v[0]=v[1]=0; if (!ssl3_setup_buffers(s)) goto err; n=ssl23_read_bytes(s, sizeof buf_space); if (n != sizeof buf_space) return(n); /* n == -1 || n == 0 */ p=s->packet; memcpy(buf,p,n); if ((p[0] & 0x80) && (p[2] == SSL2_MT_CLIENT_HELLO)) { /* * SSLv2 header */ if ((p[3] == 0x00) && (p[4] == 0x02)) { v[0]=p[3]; v[1]=p[4]; /* SSLv2 */ if (!(s->options & SSL_OP_NO_SSLv2)) type=1; } else if (p[3] == SSL3_VERSION_MAJOR) { v[0]=p[3]; v[1]=p[4]; /* SSLv3/TLSv1 */ if (p[4] >= TLS1_VERSION_MINOR) { if (!(s->options & SSL_OP_NO_TLSv1)) { s->version=TLS1_VERSION; /* type=2; */ /* done later to survive restarts */ s->state=SSL23_ST_SR_CLNT_HELLO_B; } else if (!(s->options & SSL_OP_NO_SSLv3)) { s->version=SSL3_VERSION; /* type=2; */ s->state=SSL23_ST_SR_CLNT_HELLO_B; } else if (!(s->options & SSL_OP_NO_SSLv2)) { type=1; } } else if (!(s->options & SSL_OP_NO_SSLv3)) { s->version=SSL3_VERSION; /* type=2; */ s->state=SSL23_ST_SR_CLNT_HELLO_B; } else if (!(s->options & SSL_OP_NO_SSLv2)) type=1; } } else if ((p[0] == SSL3_RT_HANDSHAKE) && (p[1] == SSL3_VERSION_MAJOR) && (p[5] == SSL3_MT_CLIENT_HELLO) && ((p[3] == 0 && p[4] < 5 /* silly record length? */) || (p[9] == p[1]))) { /* * SSLv3 or tls1 header */ v[0]=p[1]; /* major version (= SSL3_VERSION_MAJOR) */ /* We must look at client_version inside the Client Hello message * to get the correct minor version. * However if we have only a pathologically small fragment of the * Client Hello message, this would be difficult, and we'd have * to read more records to find out. * No known SSL 3.0 client fragments ClientHello like this, * so we simply assume TLS 1.0 to avoid protocol version downgrade * attacks. */ if (p[3] == 0 && p[4] < 6) { #if 0 SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_RECORD_TOO_SMALL); goto err; #else v[1] = TLS1_VERSION_MINOR; #endif } else v[1]=p[10]; /* minor version according to client_version */ if (v[1] >= TLS1_VERSION_MINOR) { if (!(s->options & SSL_OP_NO_TLSv1)) { s->version=TLS1_VERSION; type=3; } else if (!(s->options & SSL_OP_NO_SSLv3)) { s->version=SSL3_VERSION; type=3; } } else { /* client requests SSL 3.0 */ if (!(s->options & SSL_OP_NO_SSLv3)) { s->version=SSL3_VERSION; type=3; } else if (!(s->options & SSL_OP_NO_TLSv1)) { /* we won't be able to use TLS of course, * but this will send an appropriate alert */ s->version=TLS1_VERSION; type=3; } } } else if ((strncmp("GET ", (char *)p,4) == 0) || (strncmp("POST ",(char *)p,5) == 0) || (strncmp("HEAD ",(char *)p,5) == 0) || (strncmp("PUT ", (char *)p,4) == 0)) { SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_HTTP_REQUEST); goto err; } else if (strncmp("CONNECT",(char *)p,7) == 0) { SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_HTTPS_PROXY_REQUEST); goto err; } } #ifdef OPENSSL_FIPS if (FIPS_mode() && (s->version < TLS1_VERSION)) { SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO, SSL_R_ONLY_TLS_ALLOWED_IN_FIPS_MODE); goto err; } #endif if (s->state == SSL23_ST_SR_CLNT_HELLO_B) { /* we have SSLv3/TLSv1 in an SSLv2 header * (other cases skip this state) */ type=2; p=s->packet; v[0] = p[3]; /* == SSL3_VERSION_MAJOR */ v[1] = p[4]; n=((p[0]&0x7f)<<8)|p[1]; if (n > (1024*4)) { SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_RECORD_TOO_LARGE); goto err; } j=ssl23_read_bytes(s,n+2); if (j <= 0) return(j); ssl3_finish_mac(s, s->packet+2, s->packet_length-2); if (s->msg_callback) s->msg_callback(0, SSL2_VERSION, 0, s->packet+2, s->packet_length-2, s, s->msg_callback_arg); /* CLIENT-HELLO */ p=s->packet; p+=5; n2s(p,csl); n2s(p,sil); n2s(p,cl); d=(unsigned char *)s->init_buf->data; if ((csl+sil+cl+11) != s->packet_length) { SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_RECORD_LENGTH_MISMATCH); goto err; } /* record header: msg_type ... */ *(d++) = SSL3_MT_CLIENT_HELLO; /* ... and length (actual value will be written later) */ d_len = d; d += 3; /* client_version */ *(d++) = SSL3_VERSION_MAJOR; /* == v[0] */ *(d++) = v[1]; /* lets populate the random area */ /* get the challenge_length */ i=(cl > SSL3_RANDOM_SIZE)?SSL3_RANDOM_SIZE:cl; memset(d,0,SSL3_RANDOM_SIZE); memcpy(&(d[SSL3_RANDOM_SIZE-i]),&(p[csl+sil]),i); d+=SSL3_RANDOM_SIZE; /* no session-id reuse */ *(d++)=0; /* ciphers */ j=0; dd=d; d+=2; for (i=0; i<csl; i+=3) { if (p[i] != 0) continue; *(d++)=p[i+1]; *(d++)=p[i+2]; j+=2; } s2n(j,dd); /* COMPRESSION */ *(d++)=1; *(d++)=0; i = (d-(unsigned char *)s->init_buf->data) - 4; l2n3((long)i, d_len); /* get the data reused from the init_buf */ s->s3->tmp.reuse_message=1; s->s3->tmp.message_type=SSL3_MT_CLIENT_HELLO; s->s3->tmp.message_size=i; } /* imaginary new state (for program structure): */ /* s->state = SSL23_SR_CLNT_HELLO_C */ if (type == 1) { #ifdef OPENSSL_NO_SSL2 SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_UNSUPPORTED_PROTOCOL); goto err; #else /* we are talking sslv2 */ /* we need to clean up the SSLv3/TLSv1 setup and put in the * sslv2 stuff. */ if (s->s2 == NULL) { if (!ssl2_new(s)) goto err; } else ssl2_clear(s); if (s->s3 != NULL) ssl3_free(s); if (!BUF_MEM_grow_clean(s->init_buf, SSL2_MAX_RECORD_LENGTH_3_BYTE_HEADER)) { goto err; } s->state=SSL2_ST_GET_CLIENT_HELLO_A; if (s->options & SSL_OP_NO_TLSv1 && s->options & SSL_OP_NO_SSLv3) s->s2->ssl2_rollback=0; else /* reject SSL 2.0 session if client supports SSL 3.0 or TLS 1.0 * (SSL 3.0 draft/RFC 2246, App. E.2) */ s->s2->ssl2_rollback=1; /* setup the n bytes we have read so we get them from * the sslv2 buffer */ s->rstate=SSL_ST_READ_HEADER; s->packet_length=n; s->packet= &(s->s2->rbuf[0]); memcpy(s->packet,buf,n); s->s2->rbuf_left=n; s->s2->rbuf_offs=0; s->method=SSLv2_server_method(); s->handshake_func=s->method->ssl_accept; #endif } if ((type == 2) || (type == 3)) { /* we have SSLv3/TLSv1 (type 2: SSL2 style, type 3: SSL3/TLS style) */ if (!ssl_init_wbio_buffer(s,1)) goto err; /* we are in this state */ s->state=SSL3_ST_SR_CLNT_HELLO_A; if (type == 3) { /* put the 'n' bytes we have read into the input buffer * for SSLv3 */ s->rstate=SSL_ST_READ_HEADER; s->packet_length=n; s->packet= &(s->s3->rbuf.buf[0]); memcpy(s->packet,buf,n); s->s3->rbuf.left=n; s->s3->rbuf.offset=0; } else { s->packet_length=0; s->s3->rbuf.left=0; s->s3->rbuf.offset=0; } if (s->version == TLS1_VERSION) s->method = TLSv1_server_method(); else s->method = SSLv3_server_method(); #if 0 /* ssl3_get_client_hello does this */ s->client_version=(v[0]<<8)|v[1]; #endif s->handshake_func=s->method->ssl_accept; } if ((type < 1) || (type > 3)) { /* bad, very bad */ SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_UNKNOWN_PROTOCOL); goto err; } s->init_num=0; if (buf != buf_space) OPENSSL_free(buf); s->first_packet=1; return(SSL_accept(s)); err: if (buf != buf_space) OPENSSL_free(buf); return(-1); }