/* * Copyright (c) 2004 - 2007 Apple Inc. All rights reserved. * * @APPLE_LICENSE_HEADER_START@ * * "Portions Copyright (c) 2004 Apple Computer, Inc. All Rights * Reserved. This file contains Original Code and/or Modifications of * Original Code as defined in and that are subject to the Apple Public * Source License Version 1.0 (the 'License'). You may not use this file * except in compliance with the License. Please obtain a copy of the * License at http://www.apple.com/publicsource and read it before using * this file. * * The Original Code and all software distributed under the License are * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the * License for the specific language governing rights and limitations * under the License." * * @APPLE_LICENSE_HEADER_END@ */ #ifndef __ASL_H__ #define __ASL_H__ #include <stdint.h> #include <stdarg.h> #include <sys/cdefs.h> typedef struct __aslclient *aslclient; typedef struct __aslmsg *aslmsg; typedef struct __aslresponse *aslresponse; /*! @header * These routines provide an interface to the Apple System Log facility. * The API allows client applications to create flexible, structured messages * and send them to the syslogd server. Messages received by the server are * saved in a data store, subject to input filtering constraints. * This API also permits clients to create queries and search the message * data store for matching messages. */ /* * NOTE FOR HeaderDoc * * These are added to allow headerdoc2html to process * the prototypes of asl_log and asl_vlog correctly. * The "-p" option to headerdoc2html is required. */ #ifndef __DARWIN_LDBL_COMPAT2 /*! @parseOnly */ #define __DARWIN_LDBL_COMPAT2(a) #endif #ifndef __printflike /*! @parseOnly */ #define __printflike(a,b) #endif /*! @defineblock Log Message Priority Levels * Log levels of the message. */ #define ASL_LEVEL_EMERG 0 #define ASL_LEVEL_ALERT 1 #define ASL_LEVEL_CRIT 2 #define ASL_LEVEL_ERR 3 #define ASL_LEVEL_WARNING 4 #define ASL_LEVEL_NOTICE 5 #define ASL_LEVEL_INFO 6 #define ASL_LEVEL_DEBUG 7 /*! @/defineblock */ /*! @defineblock Log Message Priority Level Strings * Strings corresponding to log levels. */ #define ASL_STRING_EMERG "Emergency" #define ASL_STRING_ALERT "Alert" #define ASL_STRING_CRIT "Critical" #define ASL_STRING_ERR "Error" #define ASL_STRING_WARNING "Warning" #define ASL_STRING_NOTICE "Notice" #define ASL_STRING_INFO "Info" #define ASL_STRING_DEBUG "Debug" /*! @/defineblock */ /*! @defineblock Attribute Matching * Attribute value comparison operations. */ #define ASL_QUERY_OP_CASEFOLD 0x0010 #define ASL_QUERY_OP_PREFIX 0x0020 #define ASL_QUERY_OP_SUFFIX 0x0040 #define ASL_QUERY_OP_SUBSTRING 0x0060 #define ASL_QUERY_OP_NUMERIC 0x0080 #define ASL_QUERY_OP_REGEX 0x0100 #define ASL_QUERY_OP_EQUAL 0x0001 #define ASL_QUERY_OP_GREATER 0x0002 #define ASL_QUERY_OP_GREATER_EQUAL 0x0003 #define ASL_QUERY_OP_LESS 0x0004 #define ASL_QUERY_OP_LESS_EQUAL 0x0005 #define ASL_QUERY_OP_NOT_EQUAL 0x0006 #define ASL_QUERY_OP_TRUE 0x0007 /*! @/defineblock */ /*! @defineblock Message Attributes * * These attributes are known by ASL, and are generally * associated with all log messages. * Additional attributes may be added as desired. */ #define ASL_KEY_TIME "Time" /* Timestamp. Set automatically */ #define ASL_KEY_TIME_NSEC "TimeNanoSec" /* Nanosecond time. */ #define ASL_KEY_HOST "Host" /* Sender's address (set by the server). */ #define ASL_KEY_SENDER "Sender" /* Sender's identification string. Default is process name. */ #define ASL_KEY_FACILITY "Facility" /* Sender's facility. Default is "user". */ #define ASL_KEY_PID "PID" /* Sending process ID encoded as a string. Set automatically. */ #define ASL_KEY_UID "UID" /* UID that sent the log message (set by the server). */ #define ASL_KEY_GID "GID" /* GID that sent the log message (set by the server). */ #define ASL_KEY_LEVEL "Level" /* Log level number encoded as a string. See levels above. */ #define ASL_KEY_MSG "Message" /* Message text. */ #define ASL_KEY_READ_UID "ReadUID" /* User read access (-1 is any group). */ #define ASL_KEY_READ_GID "ReadGID" /* Group read access (-1 is any group). */ #define ASL_KEY_EXPIRE_TIME "ASLExpireTime" /* Expiration time for messages with long TTL. */ #define ASL_KEY_MSG_ID "ASLMessageID" /* 64-bit message ID number (set by the server). */ #define ASL_KEY_SESSION "Session" /* Session (set by the launchd). */ #define ASL_KEY_REF_PID "RefPID" /* Reference PID for messages proxied by launchd */ #define ASL_KEY_REF_PROC "RefProc" /* Reference process for messages proxied by launchd */ /*! @/defineblock */ /*! @defineblock aslmsg Types * Message type argument passed to asl_new(). */ #define ASL_TYPE_MSG 0 #define ASL_TYPE_QUERY 1 /*! @/defineblock */ /*! @defineblock Filter Masks * Used in client-side filtering, which determines which * messages are sent by the client to the syslogd server. */ #define ASL_FILTER_MASK_EMERG 0x01 #define ASL_FILTER_MASK_ALERT 0x02 #define ASL_FILTER_MASK_CRIT 0x04 #define ASL_FILTER_MASK_ERR 0x08 #define ASL_FILTER_MASK_WARNING 0x10 #define ASL_FILTER_MASK_NOTICE 0x20 #define ASL_FILTER_MASK_INFO 0x40 #define ASL_FILTER_MASK_DEBUG 0x80 /*! @/defineblock */ /*! @defineblock Filter Mask Macros * Macros to create bitmasks for filter settings - see asl_set_filter(). */ #define ASL_FILTER_MASK(level) (1 << (level)) #define ASL_FILTER_MASK_UPTO(level) ((1 << ((level) + 1)) - 1) /*! @/defineblock */ /*! @defineblock Client Creation Options * Options for asl_open(). */ #define ASL_OPT_STDERR 0x00000001 #define ASL_OPT_NO_DELAY 0x00000002 #define ASL_OPT_NO_REMOTE 0x00000004 /*! @/defineblock */ __BEGIN_DECLS /*! * Initialize a connection to the ASL server. * * This call is optional in most cases. The library will perform any * necessary initializations on the fly. A call to asl_open() is required * if optional settings must be made before messages are sent to the server. * These include setting the client filter and managing additional output * file descriptors. Note that the default setting of the client filter is * ASL_FILTER_MASK_UPTO(ASL_LEVEL_NOTICE), so ASL_LEVEL_DEBUG and ASL_LEVEL_INFO * messages are not sent to the server by default. * * Options (defined above) may be set using the opts parameter. They are: * * ASL_OPT_STDERR - adds stderr as an output file descriptor * * ASL_OPT_NO_DELAY - connects to the server immediately * * ASL_OPT_NO_REMOTE - disables the remote-control mechanism for adjusting * filter levers for processes using e.g. syslog -c ... * * @param ident * (input) Sender name * @param facility * (input) Facility name * @param opts * (input) Options (see asl_open Options) * @result Returns an ASL client handle */ aslclient asl_open(const char *ident, const char *facility, uint32_t opts); /*! * Shuts down a connection to the server. * * @param asl * (input) An ASL client handle */ void asl_close(aslclient asl); /*! * Write log messages to the given file descriptor. * * Log messages will be written to this file as well as to the server. * * @param asl * (input) An ASL client handle * @param fd * (input) A file descriptor * @result Returns 0 on success, non-zero on failure */ int asl_add_log_file(aslclient asl, int fd); /*! * Stop writing log messages to the given file descriptor. * The file descripter is not closed by this routine. * * @param asl * (input) An ASL client handle * @param fd * (input) A file descriptor * @result Returns 0 on success, non-zero on failure */ int asl_remove_log_file(aslclient asl, int fd); /*! * Set a filter for messages being sent to the server. * The filter is a bitmask representing priorities. The ASL_FILTER_MASK * macro may be used to convert a priority level into a bitmask for that * level. The ASL_FILTER_MASK_UPTO macro creates a bitmask for all * priorities up to and including a given priority. * Messages with priority levels that do not have a corresponding bit * set in the filter are not sent to the server, although they will be * sent to any file descripters added with asl_add_log_file(). * The default setting is ASL_FILTER_MASK_UPTO(ASL_LEVEL_NOTICE). * Returns the previous filter value. * * @param asl * (input) An ASL client handle * @param f * (input) A filter value * @result Returns the previous filter value */ int asl_set_filter(aslclient asl, int f); /* * Examine attribute keys. * * @param msg * (input) An ASL message * @param n * (input) An index value * @result Returns the key of the nth attribute in a message (beginning at zero), * or NULL if n is greater than the largest message index. */ const char *asl_key(aslmsg msg, uint32_t n); /*! * Create a new log message or query message. * * @param type * (input) Message type (see aslmsg Types) * @result Returns a newly allocated asmsg of the specified type */ aslmsg asl_new(uint32_t type); /*! * Set or re-set a message attribute. * * @param msg * (input) An aslmsg * @param key * (input) Attribute key * @param value * (input) Attribute value * @result returns 0 for success, non-zero for failure */ int asl_set(aslmsg msg, const char *key, const char *value); /*! * Remove a message attribute. * * @param msg * (input) An aslmsg * @param key * (input) Attribute key * returns 0 for success, non-zero for failure */ int asl_unset(aslmsg msg, const char *key); /*! * Get the value of a message attribute. * * @param msg * (input) An aslmsg * @param key * (input) Attribute key * @result Returns the attribute value, or NULL if the message does not contain the key */ const char *asl_get(aslmsg msg, const char *key); /*! * Log a message with a particular log level. * * @param asl * (input) An ASL client handle * @param msg * (input) An aslmsg (default attributes will be supplied if msg is NULL) * @param level * (input) Log level (ASL_LEVEL_DEBUG to ASL_LEVEL_EMERG) * @param format * (input) A printf() - style format string followed by a list of arguments * @result Returns 0 for success, non-zero for failure */ #ifdef __DARWIN_LDBL_COMPAT2 int asl_log(aslclient asl, aslmsg msg, int level, const char *format, ...) __DARWIN_LDBL_COMPAT2(asl_log) __printflike(4, 5); #else int asl_log(aslclient asl, aslmsg msg, int level, const char *format, ...) __printflike(4, 5); #endif /*! * Log a message with a particular log level. * Similar to asl_log, but takes a va_list argument. * * @param asl * (input) An ASL client handle * @param msg * (input) An aslmsg (default attributes will be supplied if msg is NULL) * @param level * (input) Log level (ASL_LEVEL_DEBUG to ASL_LEVEL_EMERG) * @param format * (input) A printf() - style format string followed by a list of arguments * @param ap * (input) A va_list containing the values for the format string * @result Returns 0 for success, non-zero for failure */ #ifdef __DARWIN_LDBL_COMPAT2 int asl_vlog(aslclient asl, aslmsg msg, int level, const char *format, va_list ap) __DARWIN_LDBL_COMPAT2(asl_vlog) __printflike(4, 0); #else int asl_vlog(aslclient asl, aslmsg msg, int level, const char *format, va_list ap) __printflike(4, 0); #endif /*! * Log a message. * * This routine may be used instead of asl_log() or asl_vlog() if asl_set() * has been used to set all of a message's attributes. * * @param asl * (input) An ASL client handle * @param msg * (input) An aslmsg * @result Returns 0 for success, non-zero for failure */ int asl_send(aslclient asl, aslmsg msg); /*! * Free a message. Frees all the attribute keys and values. * * @param msg * (input) An aslmsg to free */ void asl_free(aslmsg msg); /*! * Set arbitrary parameters of a query. * This is similar to asl_set, but allows richer query operations. * See ASL_QUERY_OP_* above. * * @param msg * (input) An aslmsg * @param key * (input) Attribute key * @param value * (input) Attribute value * @param op * (input) An operation (ASL_QUERY_OP_*) * @result Returns 0 for success, non-zero for failure */ int asl_set_query(aslmsg msg, const char *key, const char *value, uint32_t op); /*! * Search for messages matching the criteria described by the aslmsg. * The caller should set the attributes to match using asl_set_query() or asl_set(). * The operatoin ASL_QUERY_OP_EQUAL is used for attributes set with asl_set(). * * @param msg * (input) An aslmsg to match * @result Returns a set of messages accessable using aslresponse_next(), */ aslresponse asl_search(aslclient asl, aslmsg msg); /*! * Iterate over responses returned from asl_search(). * * @param r * (input) An aslresponse returned by asl_search() * @result Returns the next message (an aslmsg) in the response, or NULL when there are no more messages */ aslmsg aslresponse_next(aslresponse r); /*! * Free a response returned from asl_search(). * @param r * (input) An aslresponse returned by asl_search() */ void aslresponse_free(aslresponse r); __END_DECLS #endif /* __ASL_H__ */