## # Wrapper makefile for ICU # Copyright (C) 2003-2020 Apple Inc. All rights reserved. # # See http://www.gnu.org/manual/make/html_chapter/make_toc.html#SEC_Contents # for documentation on makefiles. Most of this was culled from the ncurses makefile. # ################################# # Apple ICU repository tag and submission numbers # # The repository tag number consists of a main version and an optional branch version, as # follows: # ICU-MMmAA[.B] # # MM comes from the open-source ICU major version, and can range from 1 to 214 (the max is # due to B&I limits on submission versions). As of March 2016 this is 57; it increases # by 1 for each ICU major release (usually 2 / year). This corresponds to # U_ICU_VERSION_MAJOR_NUM. # m is a single digit specifying the open-source ICU minor version. This is 0 before final # release (e.g. for pre-release milestones), becomes 1 for release candidate and final # release, and may increase to 2 or a little more for occasional dot releases with # maintenance fixes. This corresponds to U_ICU_VERSION_MINOR_NUM. # # Note that the ICU release may also utilize U_ICU_VERSION_PATCHLEVEL_NUM; however # that is ignored for the Apple ICU tag and submission numbers, and any related code # or data changes will bne distinguished by updating the Apple delta version AA below. # # AA is a 2-digit value specifying the version of the additional Apple deltas after # integrating a major release. This is always 2 digits (zero padded) and ranges from # 00 (the first release after integrating a new ICU version) to 99. # B is an optional branch version, i.e. a branch from the mainline version specified by # the MMmAA part. It can range from 1 to 99 and is NOT zero-padded. # # For Windows builds, the first 3 values of the 4-part FILEVERSION and PRODUCTVERSION # are formed from U_ICU_VERSION_MAJOR_NUM, U_ICU_VERSION_MINOR_NUM, and # U_ICU_VERSION_PATCHLEVEL_NUM; the 4th value is ICU_BUILD, formed from AA and B as # ICU_BUILD = 100*AA + B. # ################################# # The following is obsolete after ICU-66002: # # The B&I submission version always has 3 parts separated by '.': # MMmAA.(0 | B).T # # The first part MMmAA is the same as the repository tag number. # If the repository tag has no branch version, the second part is 0, otherwise it is # the same as the branch version (1..99). # The third part is a single digit designating the submission train; since the installsrc # target now submits different sources to different trains, we have to distinguish them. # The values currently defined for T are # 1 OSX trains # 2 embedded trains (iOS, tvos, watchos, bridgeos) including simulator versions thereof # 8 AAS for Windows # 9 linux for Siri servers # (additional train numbers for Apple platforms can be assigned from 3 up, additional # train numbers for non-Apple platforms can be assigned from 7 down). # ################################# # Notes on building for AAS using Windows (10) + Visual Studio (2015) + Cygwin: # # Either this should be run indirectly from the VS command prompt via the # BuildICUForAAS script or project, using the instructions there (which build # both 32-bit and 64-bit), or it should be run from within Cygwin using the # following instructions or equivalent (different steps for 32-bit or 64-bit # targets, details may also differ if you have the 32-bit cygwin install vs the # 64-bit one, i.e. cygwin vs cygwin64): # # 1. From VS command prompt, run vcvarsall.bat to set various environment variables. # For a 32-bit build: # > "C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\vcvarsall.bat" x86 # For a 64-bit build: # > "C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\vcvarsall.bat" amd64 # # 2. Launch Cygwin, e.g. for the 64-bit cygwin install: # > C:\cygwin64\cygwin.bat # # 3. Within cygwin, cd to the top level of the ICU sources directory, e.g. # $ cd ICU # # 4. Adjust the PATH to put the appropriate VC tools directory first: # For a 32-bit build: # $ export PATH="/cygdrive/c/Program Files (x86)/Microsoft Visual Studio 14.0/VC/bin/":$PATH # For a 64-bit build: # $ export PATH="/cygdrive/c/Program Files (x86)/Microsoft Visual Studio 14.0/VC/bin/amd64/":$PATH # # 5. Run the ICU makefile # For a 32-bit build: # make [install] WINDOWS=YES [ARCH64=NO] [DSTROOT=...] # For a 64-bit build: # make [install] WINDOWS=YES ARCH64=YES [DSTROOT=...] # ################################# ################################# ################################# # MAKE VARS ################################# ################################# # ':=' denotes a "simply expanded" variable. It's value is # set at the time of definition and it never recursively expands # when used. This is in contrast to using '=' which denotes a # recursively expanded variable. # Sane defaults, which are typically overridden on the command line #or by the environment ifeq ($(OS),Windows_NT) WINDOWS=YES LINUX=NO else WINDOWS=NO LINUX?=$(shell [[ "`uname -s`" == "Linux" ]] && echo YES || echo NO) endif ARCH64?=YES RC_ARCHS= ifndef RC_ProjectSourceVersion ifdef RC_PROJECTSOURCEVERSION RC_ProjectSourceVersion=$(RC_PROJECTSOURCEVERSION) endif endif $(info # RC_XBS=$(RC_XBS)) $(info # RC_ARCHS=$(RC_ARCHS)) $(info # RC_ProjectName=$(RC_ProjectName)) $(info # RC_ProjectSourceVersion=$(RC_ProjectSourceVersion)) # Disallow $(WINDOWS) and $(LINUX) both YES ifeq "$(WINDOWS)" "YES" ifeq "$(LINUX)" "YES" $(error WINDOWS and LINUX cannot both be YES) endif endif # chicken and egg problem: we can't use cygpath until PATH & SHELL are set, # but we have to convert VS140VCTOOLS_PATH in order to set PATH. So instead we # convert using subst. ifeq "$(WINDOWS)" "YES" ifneq "$(VS140VCTOOLS_PATH)" "" VS140VCTOOLS_CYGPATH:= /cygdrive/$(subst :/,/,$(subst \,/,$(VS140VCTOOLS_PATH))) PATH:=$(VS140VCTOOLS_CYGPATH):/usr/local/bin/:/usr/bin/:$(PATH) endif endif $(info # PATH=$(PATH)) # For some reason, cygwin bash (at least when run non-login) needs to use # bash for pwd, echo etc. (but uname does not work, see below) ifeq "$(WINDOWS)" "YES" SHELL := /bin/bash else SHELL := /bin/sh endif # if building for windows from batch script, convert Win-style paths # for SRCROOT etc. to cygwin-style paths. Don't define them if not # already defined. ifeq "$(WINDOWS)" "YES" ifneq "$(VS140VCTOOLS_PATH)" "" ifdef SRCROOT SRCROOT:=$(shell /bin/cygpath -ua $(subst \,/,$(SRCROOT))) endif ifdef OBJROOT OBJROOT:=$(shell /bin/cygpath -ua $(subst \,/,$(OBJROOT))) endif ifdef DSTROOT DSTROOT:=$(shell /bin/cygpath -ua $(subst \,/,$(DSTROOT))) endif ifdef SYMROOT SYMROOT:=$(shell /bin/cygpath -ua $(subst \,/,$(SYMROOT))) endif endif endif ifndef SRCROOT SRCROOT:=$(shell pwd) endif ifndef OBJROOT OBJROOT:=$(SRCROOT)/build endif ifndef DSTROOT DSTROOT:=$(OBJROOT) endif ifndef SYMROOT SYMROOT:=$(OBJROOT) endif $(info # SRCROOT=$(SRCROOT)) $(info # OBJROOT=$(OBJROOT)) $(info # DSTROOT=$(DSTROOT)) # Disallow $(SRCROOT) == $(OBJROOT) ifeq ($(OBJROOT), $(SRCROOT)) $(error SRCROOT same as OBJROOT) endif ifeq "$(WINDOWS)" "YES" ifeq "$(ARCH64)" "YES" OBJROOT_CURRENT=$(OBJROOT)/obj64 SYMROOT_CURRENT=$(SYMROOT)/obj64 else OBJROOT_CURRENT=$(OBJROOT)/obj32 SYMROOT_CURRENT=$(SYMROOT)/obj32 endif else ifeq "$(LINUX)" "YES" ifeq "$(ARCH64)" "YES" OBJROOT_CURRENT=$(OBJROOT)/obj64 SYMROOT_CURRENT=$(SYMROOT)/obj64 else OBJROOT_CURRENT=$(OBJROOT)/obj32 SYMROOT_CURRENT=$(SYMROOT)/obj32 endif else OBJROOT_CURRENT=$(OBJROOT) SYMROOT_CURRENT=$(SYMROOT) endif ifndef SDKROOT SDKPATH:=/ else ifeq "$(SDKROOT)" "" SDKPATH:=/ else SDKPATH:=$(shell xcodebuild -version -sdk $(SDKROOT) Path) ifeq "$(SDKPATH)" "" SDKPATH:=/ endif endif $(info # SDKROOT=$(SDKROOT)) $(info # SDKPATH=$(SDKPATH)) # An Apple submission version (passed in RC_ProjectSourceVersion for official builds) is # X[.Y[.Z]] # where X is in range 0-214747, Y and Z are in range 0-99 (with no leading zeros). # This corresponds to MMmAA.(0 | B).T where # MM is U_ICU_VERSION_MAJOR_NUM # m is U_ICU_VERSION_MINOR_NUM # AA is the Apple delta version # B is the Apple branch version (1 or 2 digits) # T is the Apple train code for submissions. [obsolete after ICU-66002] # Note The value for the SourceVersion property in version.plists will be calculated as # (X*10000 + Y*100 + Z). # We want ICU_BUILD = 100*AA + B. # ifneq "$(RC_ProjectSourceVersion)" "" ifeq "$(WINDOWS)" "YES" ICU_BUILD_AA := $(shell echo $(RC_ProjectSourceVersion) | /usr/bin/sed -r -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\2/') ICU_BUILD_B1 := $(shell echo $(RC_ProjectSourceVersion) | /usr/bin/sed -r -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\4/') ICU_BUILD_B2 := $(shell echo $(RC_ProjectSourceVersion) | /usr/bin/sed -r -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\5/') ICU_TRAIN_CODE := $(shell echo $(RC_ProjectSourceVersion) | /usr/bin/sed -r -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\7/') else ICU_BUILD_AA := $(shell echo $(RC_ProjectSourceVersion) | sed -E -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\2/') ICU_BUILD_B1 := $(shell echo $(RC_ProjectSourceVersion) | sed -E -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\4/') ICU_BUILD_B2 := $(shell echo $(RC_ProjectSourceVersion) | sed -E -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\5/') ICU_TRAIN_CODE := $(shell echo $(RC_ProjectSourceVersion) | sed -E -e 's/([0-9]+)([0-9]{2})(\.([0-9])([0-9])?(\.([0-9]{1,2}))?)?/\7/') endif ifeq "$(ICU_BUILD_AA)" "" ICU_BUILD := 0 else ICU_BUILD := $(subst a,$(ICU_BUILD_AA),abc) ifeq "$(ICU_BUILD_B1)" "" ICU_BUILD := $(subst b,0,$(ICU_BUILD)) ICU_BUILD := $(subst c,0,$(ICU_BUILD)) else ifeq "$(ICU_BUILD_B2)" "" ICU_BUILD := $(subst b,0,$(ICU_BUILD)) ICU_BUILD := $(subst c,$(ICU_BUILD_B1),$(ICU_BUILD)) else ICU_BUILD := $(subst b,$(ICU_BUILD_B1),$(ICU_BUILD)) ICU_BUILD := $(subst c,$(ICU_BUILD_B2),$(ICU_BUILD)) endif endif endif ifeq "$(ICU_TRAIN_CODE)" "" ICU_TRAIN_CODE := 0 endif else ICU_BUILD := 0 ICU_TRAIN_CODE := 0 endif $(info # ICU_BUILD=$(ICU_BUILD)) $(info # ICU_TRAIN_CODE=$(ICU_TRAIN_CODE)) ifeq "$(ICU_BUILD)" "0" DEFINE_BUILD_LEVEL = else DEFINE_BUILD_LEVEL =-DU_ICU_VERSION_BUILDLEVEL_NUM=$(ICU_BUILD) endif # Determine build type. In some cases (e.g. running installsrc for submitproject) # the only accurate information we may have about build type is from ICU_TRAIN_CODE, # so give priority to that if nonzero. [though it is mostly obsolete after ICU-66002 # it might possibly be used for non-Apple-platform builds] # The values currently defined for ICU_TRAIN_CODE and corresponding ICU_BUILD_TYPE are # 1 OSX trains # 2 embedded trains (iOS, tvos, watchos) including simulator versions thereof. # may have BUILD_TYPE=DEVICE,SIMULATOR,TOOL # 8 AAS for Windows # 9 linux for Siri servers # ifeq "$(WINDOWS)" "YES" ICU_FOR_APPLE_PLATFORMS:=NO else ifeq "$(ICU_TRAIN_CODE)" "8" override WINDOWS=YES ICU_FOR_APPLE_PLATFORMS:=NO else ifeq "$(LINUX)" "YES" ICU_FOR_APPLE_PLATFORMS:=NO else ifeq "$(ICU_TRAIN_CODE)" "9" override LINUX=YES ICU_FOR_APPLE_PLATFORMS:=NO else ICU_FOR_APPLE_PLATFORMS:=YES endif # For Apple builds, get more details from the SDK if available # In TargetConditionals.h: # TARGET_OS_IPHONE -is 1 iff generating code for firmware, devices, or simulator (all embedded trains) # in that case: # exactly one of the following is 1: TARGET_OS_SIMULATOR, TARGET_OS_EMBEDDED (i.e. device) # exactly one of the following is 1: TARGET_OS_IOS, TARGET_OS_TV, TARGET_OS_WATCH, TARGET_OS_BRIDGE # # if SDKPATH is / then we are doing something like a make check against host SDK and not building # for embedded, so ICU_FOR_EMBEDDED_TRAINS must be NO # ifeq "$(ICU_FOR_APPLE_PLATFORMS)" "YES" HOSTCC := $(shell xcrun --sdk macosx --find cc) HOSTCXX := $(shell xcrun --sdk macosx --find c++) HOSTSDKPATH := $(shell xcrun --sdk macosx.internal --show-sdk-path) HOSTISYSROOT = -isysroot $(HOSTSDKPATH) ifeq "$(SDKPATH)" "/" ISYSROOT:= -isysroot $(HOSTSDKPATH) CC := $(HOSTCC) CXX := $(HOSTCXX) NM := $(shell xcrun --sdk macosx --find nm) STRIPCMD := $(shell xcrun --sdk macosx --find strip) export ICU_FOR_EMBEDDED_TRAINS:=NO else ISYSROOT:= -isysroot $(SDKPATH) CC := $(shell xcrun --sdk $(SDKPATH) --find cc) CXX := $(shell xcrun --sdk $(SDKPATH) --find c++) NM := $(shell xcrun --sdk $(SDKPATH) --find nm) STRIPCMD := $(shell xcrun --sdk $(SDKPATH) --find strip) EMBEDDEDTRAIN:=$(shell $(CXX) -E -dM -x c $(ISYSROOT) -include TargetConditionals.h /dev/null | fgrep define' 'TARGET_OS_IPHONE | cut -d' ' -f3) ifeq "$(EMBEDDEDTRAIN)" "1" export ICU_FOR_EMBEDDED_TRAINS:=YES else export ICU_FOR_EMBEDDED_TRAINS:=NO endif endif SIMULATOROS:=$(shell $(CXX) -E -dM -x c $(ISYSROOT) -include TargetConditionals.h /dev/null | fgrep define' 'TARGET_OS_SIMULATOR | cut -d' ' -f3) TVOS:=$(shell $(CXX) -E -dM -x c $(ISYSROOT) -include TargetConditionals.h /dev/null | fgrep define' 'TARGET_OS_TV | cut -d' ' -f3) WATCHOS:=$(shell $(CXX) -E -dM -x c $(ISYSROOT) -include TargetConditionals.h /dev/null | fgrep define' 'TARGET_OS_WATCH | cut -d' ' -f3) BRIDGEOS:=$(shell $(CXX) -E -dM -x c $(ISYSROOT) -include TargetConditionals.h /dev/null | fgrep define' 'TARGET_OS_BRIDGE | cut -d' ' -f3) ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES" ifeq "$(SIMULATOROS)" "1" BUILD_TYPE=SIMULATOR else BUILD_TYPE=DEVICE endif else ifeq "$(RC_ProjectName)" "tzTools" BUILD_TYPE=TOOL else BUILD_TYPE= endif else ifeq "$(LINUX)" "YES" ISYSROOT:= ifeq "$(shell (which clang >& /dev/null && which clang++ >& /dev/null && echo YES) || echo NO)" "YES" CC := clang CXX := clang++ else CC := gcc CXX := g++ endif endif export ICU_FOR_EMBEDDED_TRAINS:=NO TVOS:=0 WATCHOS:=0 BRIDGEOS:=0 BUILD_TYPE= endif CROSS_BUILD:=$(ICU_FOR_EMBEDDED_TRAINS) CROSSHOST_OBJROOT=$(OBJROOT)/crossbuildhost $(info # ICU_FOR_APPLE_PLATFORMS=$(ICU_FOR_APPLE_PLATFORMS)) $(info # HOSTCC=$(HOSTCC)) $(info # HOSTCXX=$(HOSTCXX)) $(info # HOSTISYSROOT=$(HOSTISYSROOT)) $(info # CC=$(CC)) $(info # CXX=$(CXX)) $(info # ISYSROOT=$(ISYSROOT)) $(info # ICU_FOR_EMBEDDED_TRAINS=$(ICU_FOR_EMBEDDED_TRAINS)) $(info # CROSS_BUILD=$(CROSS_BUILD)) $(info # BUILD_TYPE=$(BUILD_TYPE)) # Disallow cross builds on Windows/Linux for now # (since those builds are not out-of-source as required for cross-builds) ifeq "$(CROSS_BUILD)" "YES" ifeq "$(WINDOWS)" "YES" $(error Cross-builds currently not allowed on Windows) endif ifeq "$(LINUX)" "YES" $(error Cross-builds currently not allowed on Linux) endif endif MAC_OS_X_VERSION_MIN_REQUIRED=101504 OSX_HOST_VERSION_MIN_STRING=10.15.4 ifndef IPHONEOS_DEPLOYMENT_TARGET IOS_VERSION_TARGET_STRING=14.0 else ifeq "$(IPHONEOS_DEPLOYMENT_TARGET)" "" IOS_VERSION_TARGET_STRING=14.0 else IOS_VERSION_TARGET_STRING=$(IPHONEOS_DEPLOYMENT_TARGET) endif ifndef MACOSX_DEPLOYMENT_TARGET OSX_VERSION_TARGET_STRING=11.0 else ifeq "$(MACOSX_DEPLOYMENT_TARGET)" "" OSX_VERSION_TARGET_STRING=11.0 else OSX_VERSION_TARGET_STRING=$(MACOSX_DEPLOYMENT_TARGET) endif ifndef WATCHOS_DEPLOYMENT_TARGET WATCHOS_VERSION_TARGET_STRING=7.0 else ifeq "$(WATCHOS_DEPLOYMENT_TARGET)" "" WATCHOS_VERSION_TARGET_STRING=7.0 else WATCHOS_VERSION_TARGET_STRING=$(WATCHOS_DEPLOYMENT_TARGET) endif ifndef TVOS_DEPLOYMENT_TARGET TVOS_VERSION_TARGET_STRING=14.0 else ifeq "$(TVOS_DEPLOYMENT_TARGET)" "" TVOS_VERSION_TARGET_STRING=14.0 else TVOS_VERSION_TARGET_STRING=$(TVOS_DEPLOYMENT_TARGET) endif ifndef BRIDGEOS_DEPLOYMENT_TARGET BRIDGEOS_VERSION_TARGET_STRING=4.0 else ifeq "$(BRIDGEOS_DEPLOYMENT_TARGET)" "" BRIDGEOS_VERSION_TARGET_STRING=4.0 else BRIDGEOS_VERSION_TARGET_STRING=$(BRIDGEOS_DEPLOYMENT_TARGET) endif $(info # IOS_VERSION_TARGET_STRING=$(IOS_VERSION_TARGET_STRING)) $(info # OSX_VERSION_TARGET_STRING=$(OSX_VERSION_TARGET_STRING)) $(info # WATCHOS_VERSION_TARGET_STRING=$(WATCHOS_VERSION_TARGET_STRING)) $(info # TVOS_VERSION_TARGET_STRING=$(TVOS_VERSION_TARGET_STRING)) $(info # BRIDGEOS_VERSION_TARGET_STRING=$(BRIDGEOS_VERSION_TARGET_STRING)) ifeq "$(BUILD_TYPE)" "DEVICE" ifeq "$(WATCHOS)" "1" ICU_TARGET_VERSION := -mwatchos-version-min=$(WATCHOS_VERSION_TARGET_STRING) else ifeq "$(TVOS)" "1" ICU_TARGET_VERSION := -mtvos-version-min=$(TVOS_VERSION_TARGET_STRING) else ifeq "$(BRIDGEOS)" "1" ICU_TARGET_VERSION := -mbridgeos-version-min=$(BRIDGEOS_VERSION_TARGET_STRING) else ICU_TARGET_VERSION := -miphoneos-version-min=$(IOS_VERSION_TARGET_STRING) endif else ifeq "$(BUILD_TYPE)" "SIMULATOR" ifeq "$(WATCHOS)" "1" ICU_TARGET_VERSION := -mwatchos-simulator-version-min=$(WATCHOS_VERSION_TARGET_STRING) else ifeq "$(TVOS)" "1" ICU_TARGET_VERSION := -mtvos-simulator-version-min=$(TVOS_VERSION_TARGET_STRING) else ICU_TARGET_VERSION := -mios-simulator-version-min=$(IOS_VERSION_TARGET_STRING) endif else ICU_TARGET_VERSION := endif $(info # ICU_TARGET_VERSION=$(ICU_TARGET_VERSION)) DISABLE_DRAFT:=$(ICU_FOR_EMBEDDED_TRAINS) ifeq "$(DISABLE_DRAFT)" "YES" DRAFT_FLAG=--disable-draft else DRAFT_FLAG= endif # For some reason, under cygwin, bash uname is not found, and # sh uname does not produce a result with -p or -m. So we just # hardcode here. ifeq "$(WINDOWS)" "YES" UNAME_PROCESSOR:=i386 else UNAME_PROCESSOR:=$(shell uname -p) endif ifneq "$(RC_ARCHS)" "" INSTALLHDRS_ARCH=-arch $(shell echo $(RC_ARCHS) | cut -d' ' -f1) else INSTALLHDRS_ARCH= endif $(info # INSTALLHDRS_ARCH=$(INSTALLHDRS_ARCH)) $(info # buildhost=$(UNAME_PROCESSOR)) # FORCEENDIAN below is to override silly configure behavior in which if # __APPLE_CC__ is defined and archs are in { ppc, ppc64, i386, x86_64 } # then it assumes a universal build (ac_cv_c_bigendian=universal) with # data file initially built big-endian. # # darwin releases # darwin 18.0.0 2018-Sep: macOS 10.14, iOS 12 # darwin 18.2.0 2018-Oct: macOS 10.14.1, iOS 12.1 # darwin 19.0.0 2019-fall: macOS 10.15, iOS 13 # darwin 20.0.0 2020-fall: macOS 10.16, iOS 14 # ifeq "$(CROSS_BUILD)" "YES" RC_ARCHS_FIRST=$(shell echo $(RC_ARCHS) | cut -d' ' -f1) TARGET_SPEC=$(RC_ARCHS_FIRST)-apple-darwin20.0.0 ENV_CONFIGURE_ARCHS=-arch $(RC_ARCHS_FIRST) ICUPKGTOOLIBS="$(CROSSHOST_OBJROOT)/lib:$(CROSSHOST_OBJROOT)/stubdata" ICUPKGTOOL=$(CROSSHOST_OBJROOT)/bin/icupkg ifeq "$(filter-out i386 x86_64,$(RC_ARCHS))" "" FORCEENDIAN= ac_cv_c_bigendian=no else FORCEENDIAN= endif else ifeq "$(LINUX)" "YES" TARGET_SPEC=$(UNAME_PROCESSOR)-unknown-linux-gnu ENV_CONFIGURE_ARCHS= ICUPKGTOOLIBS="$(OBJROOT_CURRENT)/lib:$(OBJROOT_CURRENT)/stubdata" ICUPKGTOOL=$(OBJROOT_CURRENT)/bin/icupkg FORCEENDIAN= else TARGET_SPEC=$(UNAME_PROCESSOR)-apple-darwin20.0.0 ENV_CONFIGURE_ARCHS= ICUPKGTOOLIBS="$(OBJROOT_CURRENT)/lib:$(OBJROOT_CURRENT)/stubdata" ICUPKGTOOL=$(OBJROOT_CURRENT)/bin/icupkg FORCEENDIAN= endif $(info # TARGET_SPEC=$(TARGET_SPEC)) $(info # ENV_CONFIGURE_ARCHS=$(ENV_CONFIGURE_ARCHS)) ICU_TARGET_VERSION_FOR_TZ_EXTRA := ifeq "$(BUILD_TYPE)" "SIMULATOR" ICU_TARGET_VERSION_FOR_TZ_EXTRA := -mmacosx-version-min=$(OSX_HOST_VERSION_MIN_STRING) endif ifeq "$(BUILD_TYPE)" "DEVICE" THUMB_FLAG = -mthumb else THUMB_FLAG = endif # even for a crossbuild host build, we want to use the target's latest tzdata as pointed to by latest_tzdata.tar.gz; # first try RC_EMBEDDEDPROJECT_DIR (), else SDKPATH. ifdef RC_EMBEDDEDPROJECT_DIR ifeq "$(shell test -L $(RC_EMBEDDEDPROJECT_DIR)/TimeZoneData/usr/local/share/tz/latest_tzdata.tar.gz && echo YES )" "YES" export TZDATA:=$(RC_EMBEDDEDPROJECT_DIR)/TimeZoneData/usr/local/share/tz/$(shell readlink $(RC_EMBEDDEDPROJECT_DIR)/TimeZoneData/usr/local/share/tz/latest_tzdata.tar.gz) endif ifeq "$(shell test -d $(RC_EMBEDDEDPROJECT_DIR)/TimeZoneData/usr/local/share/tz/icudata && echo YES )" "YES" export TZAUXFILESDIR:=$(RC_EMBEDDEDPROJECT_DIR)/TimeZoneData/usr/local/share/tz/icudata endif endif ifndef TZDATA ifeq "$(shell test -L $(SDKPATH)/usr/local/share/tz/latest_tzdata.tar.gz && echo YES )" "YES" export TZDATA:=$(SDKPATH)/usr/local/share/tz/$(shell readlink $(SDKPATH)/usr/local/share/tz/latest_tzdata.tar.gz) endif ifeq "$(shell test -d $(SDKPATH)/usr/local/share/tz/icudata && echo YES )" "YES" export TZAUXFILESDIR:=$(SDKPATH)/usr/local/share/tz/icudata endif endif $(info # RC_EMBEDDEDPROJECT_DIR=$(RC_EMBEDDEDPROJECT_DIR)) $(info # TZDATA=$(TZDATA)) $(info # TZAUXFILESDIR=$(TZAUXFILESDIR)) ifndef TZAUXFILESDIR TZAUXFILESDIR:=. endif APPLE_INTERNAL_DIR=/AppleInternal DSYMTOOL := /usr/bin/dsymutil DSYMSUFFIX := .dSYM ################################# # Headers ################################# # For installhdrs. Not every compiled module has an associated header. Normally, # ICU installs headers as a sub-target of the install target. But since we only want # certain libraries to install (and since we link all of our own .o modules), we need # invoke the headers targets ourselves. This may be problematic because there isn't a # good way to dist-clean afterwards...we need to do explicit dist-cleans, especially if # install the extra libraries. EXTRA_HDRS = # EXTRA_HDRS = ./extra/ustdio/ ./layout/ ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES" HDR_MAKE_SUBDIR = ./common/ ./i18n/ $(EXTRA_HDRS) else ifeq "$(WINDOWS)" "YES" HDR_MAKE_SUBDIR = ./common/ ./i18n/ $(EXTRA_HDRS) else HDR_MAKE_SUBDIR = ./common/ ./i18n/ ./io/ $(EXTRA_HDRS) endif ifeq "$(WINDOWS)" "YES" PRIVATE_HDR_PREFIX=$(APPLE_INTERNAL_DIR) else ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES" HDR_PREFIX=/usr PRIVATE_HDR_PREFIX=/usr/local else PRIVATE_HDR_PREFIX=/usr/local endif ################################# # Install ################################# # For install. We currently don't install EXTRA_LIBS. We also don't install the data # directly into the ICU library. It is now installed at /usr/share/icu/*.dat. Thus we # don't use DATA_OBJ anymore. This could change if we decide to move the data back into # the icucore monolithic library. INSTALL = /usr/bin/install COMMON_OBJ = ./common/*.o I18N_OBJ = ./i18n/*.o IO_OBJ = ./io/*.o STUB_DATA_OBJ = ./stubdata/*.o EXTRA_LIBS = #EXTRA_LIBS =./extra/ ./layout/ ./tools/ctestfw/ ./tools/toolutil/ #DATA_OBJ = ./data/out/build/*.o ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES" DYLIB_OBJS=$(COMMON_OBJ) $(I18N_OBJ) $(STUB_DATA_OBJ) else ifeq "$(WINDOWS)" "YES" DYLIB_OBJS=$(COMMON_OBJ) ./common/common.res $(I18N_OBJ) $(STUB_DATA_OBJ) else DYLIB_OBJS=$(COMMON_OBJ) $(I18N_OBJ) $(IO_OBJ) $(STUB_DATA_OBJ) endif ################################# # Sources ################################# # For installsrc (B&I) # Note that installsrc is run on the system from which ICU is submitted, which # may be a different environment than the one for a which a build is targeted. INSTALLSRC_VARFILES=./ICU_embedded.order \ ./minimalapis.txt ./minimalapisTest.c \ BuildICUForAAS_script.bat EXPORT.APPLE ################################# # Cleaning ################################# #We need to clean after installing. EXTRA_CLEAN = # Some directories aren't cleaned recursively. Clean them manually... MANUAL_CLEAN_TOOLS = ./tools/dumpce MANUAL_CLEAN_EXTRA = ./extra/scrptrun ./samples/layout ./extra/ustdio ./extra MANUAL_CLEAN_TEST = ./test/collperf ./test/iotest ./test/letest ./test/thaitest ./test/threadtest ./test/testmap ./test MANUAL_CLEAN_SAMPLE = ./samples/layout ./samples CLEAN_SUBDIR = ./stubdata ./common ./i18n ./io ./layout ./layoutex ./data ./tools ./$(MANUAL_CLEAN_TOOLS) $(MANUAL_CLEAN_EXTRA) $(MANUAL_CLEAN_TEST) $(MANUAL_CLEAN_SAMPLE) ################################# # Config flags ################################# ifeq "$(WINDOWS)" "YES" ifeq "$(ARCH64)" "YES" CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples --disable-icuio \ --with-data-packaging=library --prefix=$(PRIVATE_HDR_PREFIX) --with-library-bits=64 \ $(DRAFT_FLAG) else CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples --disable-icuio \ --with-data-packaging=library --prefix=$(PRIVATE_HDR_PREFIX) --with-library-bits=32 \ $(DRAFT_FLAG) endif else ifeq "$(LINUX)" "YES" ifeq "$(ARCH64)" "YES" CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples \ --with-data-packaging=archive --prefix=$(PRIVATE_HDR_PREFIX) --with-library-bits=64 \ $(DRAFT_FLAG) else CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples \ --with-data-packaging=archive --prefix=$(PRIVATE_HDR_PREFIX) --with-library-bits=32 \ $(DRAFT_FLAG) endif else ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES" CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples \ --with-data-packaging=archive --prefix=$(PRIVATE_HDR_PREFIX) \ $(DRAFT_FLAG) else CONFIG_FLAGS = --disable-renaming --disable-extras --disable-layout --disable-samples \ --with-data-packaging=archive --prefix=$(PRIVATE_HDR_PREFIX) \ $(DRAFT_FLAG) endif ################################# # Install paths ################################# # This may or may not be an appropriate name for the icu dylib. This naming scheme is # an attempt to follow the icu convention in naming the dylib and then having symbolic # links of easier to remember library names point it it. *UPDATE* the version and # sub-version variables as needed. The Core version should be 'A' until the core # version changes it's API...that is a new version isn't backwards compatible. # The ICU version/subversion should reflect the actual ICU version. LIB_NAME = icucore ICU_VERS = 66 ICU_SUBVERS = 1 CORE_VERS = A ifeq "$(WINDOWS)" "YES" DYLIB_SUFF = dll ifeq "$(ARCH64)" "YES" winprogdir = /Program\ Files/Common\ Files/Apple/Apple\ Application\ Support/ winintlibdir = /AppleInternal/lib64/ else winprogdir = /Program\ Files\ \(x86\)/Common\ Files/Apple/Apple\ Application\ Support/ winintlibdir = /AppleInternal/lib32/ endif libdir = else ifeq "$(LINUX)" "YES" DYLIB_SUFF = so ifeq "$(ARCH64)" "YES" libdir = /usr/local/lib/ else libdir = /usr/local/lib32/ endif winprogdir = winintlibdir = else DYLIB_SUFF = dylib libdir = /usr/lib/ winprogdir = winintlibdir = endif DYLIB = lib$(LIB_NAME).$(DYLIB_SUFF) DYLIB_DEBUG = lib$(LIB_NAME)_debug.$(DYLIB_SUFF) DYLIB_PROFILE = lib$(LIB_NAME)_profile.$(DYLIB_SUFF) ifeq "$(WINDOWS)" "YES" INSTALLED_DYLIB = $(LIB_NAME).$(DYLIB_SUFF) INSTALLED_DYLIB_DEBUG = $(LIB_NAME)_debug.$(DYLIB_SUFF) INSTALLED_DYLIB_PROFILE = $(LIB_NAME)_profile.$(DYLIB_SUFF) else ifeq "$(LINUX)" "YES" INSTALLED_DYLIB = lib$(LIB_NAME).$(DYLIB_SUFF) INSTALLED_DYLIB_DEBUG = lib$(LIB_NAME)_debug.$(DYLIB_SUFF) INSTALLED_DYLIB_PROFILE = lib$(LIB_NAME)_profile.$(DYLIB_SUFF) else INSTALLED_DYLIB = lib$(LIB_NAME).$(CORE_VERS).$(DYLIB_SUFF) INSTALLED_DYLIB_DEBUG = lib$(LIB_NAME).$(CORE_VERS)_debug.$(DYLIB_SUFF) INSTALLED_DYLIB_PROFILE = lib$(LIB_NAME).$(CORE_VERS)_profile.$(DYLIB_SUFF) endif INSTALLED_DYLIB_icu = INSTALLED_DYLIB INSTALLED_DYLIB_debug = INSTALLED_DYLIB_DEBUG INSTALLED_DYLIB_profile = INSTALLED_DYLIB_PROFILE DYLIB_icu = DYLIB DYLIB_debug = DYLIB_DEBUG DYLIB_profile = DYLIB_PROFILE ################################# # Data files ################################# OPEN_SOURCE_VERSIONS_DIR=/usr/local/OpenSourceVersions/ OPEN_SOURCE_LICENSES_DIR=/usr/local/OpenSourceLicenses/ B_DATA_FILE=icudt$(ICU_VERS)b.dat L_DATA_FILE=icudt$(ICU_VERS)l.dat DATA_BUILD_SUBDIR= data/out ifeq "$(LINUX)" "YES" DATA_INSTALL_DIR=/usr/local/share/icu/ else DATA_INSTALL_DIR=/usr/share/icu/ endif # DATA_LOOKUP_DIR is what the target ICU_DATA_DIR gets set to in CFLAGS, CXXFLAGS; # DATA_LOOKUP_DIR_BUILDHOST is what any crossbuild host ICU_DATA_DIR gets set to. # Formerly we had DATA_LOOKUP_DIR=/var/db/icu/ for embedded non-simulator builds # and DATA_LOOKUP_DIR=/usr/share/icu/ for everything else. Now all systems look # in the same place for the main data file: DATA_LOOKUP_DIR=$(DATA_INSTALL_DIR) DATA_LOOKUP_DIR_BUILDHOST=$(DATA_INSTALL_DIR) # Timezone data file(s) # ICU will look for /var/db/timezone/icutz/icutz44l.dat # If directory or file is not present, the timesone data in # current data file e.g. /usr/share/icu/icudt56l.dat will be used. # Currently we are not conditionalizing the definition of # TZDATA_LOOKUP_DIR as in # ifeq "$(BUILD_TYPE)" "DEVICE" # TZDATA_LOOKUP_DIR = /var/db/timezone/icutz # else # ... # since the code stats the path for TZDATA_LOOKUP_DIR and does # not try to use it if it does not exist. We could define it # as TZDATA_LOOKUP_DIR = /usr/share/icutz when not needed... # TZDATA_LOOKUP_DIR is passed to compiler as U_TIMEZONE_FILES_DIR # TZDATA_PACKAGE is passed to compiler as U_TIMEZONE_PACKAGE TZDATA_LOOKUP_DIR = /var/db/timezone/icutz TZDATA_PACKAGE = icutz44l TZDATA_FORMAT_STRING = "44l" TZDATA_FORMAT_FILE = icutzformat.txt # Name of runtime environment variable to get the prefix path for DATA_LOOKUP_DIR # Currently we are only using this for LINUX, should also use for iOS simulator ifeq "$(LINUX)" "YES" DATA_DIR_PREFIX_ENV_VAR=APPLE_FRAMEWORKS_ROOT else DATA_DIR_PREFIX_ENV_VAR= endif ################################# # Tools ################################# localtooldir=/usr/local/bin/ locallibdir=/usr/local/lib/ INFOTOOL = icuinfo INFOTOOL_OBJS = ./tools/icuinfo/icuinfo.o ./tools/toolutil/udbgutil.o ./tools/toolutil/uoptions.o ICUZDUMPTOOL = icuzdump ifeq "$(ICU_FOR_EMBEDDED_TRAINS)" "YES" ICUZDUMPTOOL_OBJS = ./tools/tzcode/icuzdump.o $(IO_OBJ) else ICUZDUMPTOOL_OBJS = ./tools/tzcode/icuzdump.o endif TOOLSLIB_NAME = icutu TOOLS_DYLIB = libicutu.$(DYLIB_SUFF) TOOLS_DYLIB_OBJS = ./tools/toolutil/*.o # The following modified version enables the tz toools to be used on systems with ICU 55 or later. # It is used with the toolchain tools below. TOOLSLIB_NAME_FORTOOLS = icutux TOOLS_DYLIB_FORTOOLS = libicutux.$(DYLIB_SUFF) TOOLS_DYLIB_OBJS_FORTOOLS = ./tools/toolutil/collationinfo.o ./tools/toolutil/filestrm.o \ ./tools/toolutil/package.o ./tools/toolutil/pkg_icu.o ./tools/toolutil/pkgitems.o \ ./tools/toolutil/swapimpl.o ./tools/toolutil/toolutil.o ./tools/toolutil/ucbuf.o \ ./tools/toolutil/unewdata.o ./tools/toolutil/uoptions.o ./tools/toolutil/uparse.o \ $(COMMON_OBJ) $(STUB_DATA_OBJ) ZICTOOL = icuzic ZICTOOL_OBJS = ./tools/tzcode/zic.o ./tools/tzcode/localtime.o ./tools/tzcode/asctime.o ./tools/tzcode/scheck.o ./tools/tzcode/ialloc.o RESTOOL = icugenrb RESTOOL_OBJS = ./tools/genrb/errmsg.o ./tools/genrb/genrb.o ./tools/genrb/parse.o ./tools/genrb/read.o ./tools/genrb/reslist.o ./tools/genrb/ustr.o \ ./tools/genrb/rbutil.o ./tools/genrb/wrtjava.o ./tools/genrb/rle.o ./tools/genrb/wrtxml.o ./tools/genrb/prscmnts.o ./tools/genrb/filterrb.o # note there is also a symbol ICUPKGTOOL which refers to the one used # internally which is linked against the separate uc and i18n libs. PKGTOOL = icupkg PKGTOOL_OBJS = ./tools/icupkg/icupkg.o TZ2ICUTOOL = tz2icu TZ2ICUTOOL_OBJS = ./tools/tzcode/tz2icu.o GENBRKTOOL = icugenbrk GENBRKTOOL_OBJS = ./tools/genbrk/genbrk.o ################################# # Ancillary files # e.g. supplementalData.xml, per # These are like internal headers in that they are only installed for # (other) projects to build against, not needed at runtime. # Install during installhdrs? That does not seem to work for CLDRFILESDIR ################################# CLDRFILESDIR=/usr/local/share/cldr EMOJI_DATA_DIR=/usr/local/share/emojiData ################################# # Environment variables ################################# # $(RC_ARCHS:%=-arch %) is a substitution reference. It denotes, in this case, # for every value in RC_ARCHS, replace it with "-arch ". Substitution # references have the form $(var:a=b). We can insert the strip and prebinding commands # into CFLAGS (and CXXFLAGS). This controls a lot of the external variables so we don't # need to directly modify the ICU files (like for CFLAGS, etc). LIBOVERRIDES=LIBICUDT="-L$(OBJROOT_CURRENT) -l$(LIB_NAME)" \ LIBICUUC="-L$(OBJROOT_CURRENT) -l$(LIB_NAME)" \ LIBICUI18N="-L$(OBJROOT_CURRENT) -l$(LIB_NAME)" CFLAGS_SANITIZER := CXXFLAGS_SANITIZER := LDFLAGS_SANITIZER := ifeq ($(RC_ENABLE_ADDRESS_SANITIZATION),1) $(info Enabling Address Sanitizer) ASAN_FLAGS:=-fsanitize=address CFLAGS_SANITIZER += $(ASAN_FLAGS) CXXFLAGS_SANITIZER += $(ASAN_FLAGS) LDFLAGS_SANITIZER += $(ASAN_FLAGS) endif ifeq ($(RC_ENABLE_UNDEFINED_BEHAVIOR_SANITIZATION),1) $(info Enabling Undefined Behaviour Sanitizer) UBSAN_FLAGS:=-fsanitize=undefined CFLAGS_SANITIZER += $(UBSAN_FLAGS) CXXFLAGS_SANITIZER += $(UBSAN_FLAGS) LDFLAGS_SANITIZER += $(UBSAN_FLAGS) endif ifeq ($(RC_ENABLE_THREAD_SANITIZATION),1) $(info Enabling Thread Sanitizer) TSAN_FLAGS:=-fsanitize=thread CFLAGS_SANITIZER += $(TSAN_FLAGS) CXXFLAGS_SANITIZER += $(TSAN_FLAGS) LDFLAGS_SANITIZER += $(TSAN_FLAGS) endif LDFLAGS += $(LDFLAGS_SANITIZER) APPLE_HARDENING_OPTS := -DFORTIFY_SOURCE=2 -fstack-protector-strong # For normal Windows builds set the ENV= options here; for debug Windows builds set the ENV_DEBUG= # options here and also the update the LINK.EXE lines in the TARGETS section below. ifeq "$(WINDOWS)" "YES" ifeq "$(ARCH64)" "YES" ENV= CFLAGS="/utf-8 /O2 /Ob2 /MD /GF /GS /Zi /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES" \ CXXFLAGS="/utf-8 /O2 /Ob2 /MD /GF /GS /Zi /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES /EHsc /Zc:wchar_t /DU_SHOW_CPLUSPLUS_API=1" \ LDFLAGS="/NXCOMPAT /DYNAMICBASE /DEBUG /OPT:REF" else ENV= CFLAGS="/utf-8 /O2 /Ob2 /MD /GF /GS /Zi /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES" \ CXXFLAGS="/utf-8 /O2 /Ob2 /MD /GF /GS /Zi /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES /EHsc /Zc:wchar_t /DU_SHOW_CPLUSPLUS_API=1" \ LDFLAGS="/NXCOMPAT /SAFESEH /DYNAMICBASE /DEBUG /OPT:REF" endif ENV_CONFIGURE= CPPFLAGS="-DU_DISABLE_RENAMING=1 $(DEFINE_BUILD_LEVEL)" \ CFLAGS="/utf-8 /O2 /Ob2 /MD /GF /GS /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES" \ CXXFLAGS="/utf-8 /O2 /Ob2 /MD /GF /GS /nologo /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES /EHsc /Zc:wchar_t /DU_SHOW_CPLUSPLUS_API=1" ENV_DEBUG= CFLAGS="/utf-8 /O2 /Ob2 /MDd /GF /GS /Zi /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES" \ CXXFLAGS="/utf-8 /O2 /Ob2 /MDd /GF /GS /Zi /D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES /EHsc /DU_SHOW_CPLUSPLUS_API=1" \ LDFLAGS="/DEBUG /DYNAMICBASE" ENV_PROFILE= else ifeq "$(LINUX)" "YES" ifeq "$(ARCH64)" "YES" ENV_CONFIGURE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ LANG="en_US.utf8" \ CPPFLAGS="-DU_DISABLE_RENAMING=1 $(DEFINE_BUILD_LEVEL)" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -fno-exceptions -fvisibility=hidden" \ CXXFLAGS="-std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" ENV= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ LANG="en_US.utf8" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -fno-exceptions -fvisibility=hidden" \ CXXFLAGS="-std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" ENV_DEBUG= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ LANG="en_US.utf8" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -O0 -gfull -fno-exceptions -fvisibility=hidden" \ CXXFLAGS="-std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -O0 -gfull -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" ENV_PROFILE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ LANG="en_US.utf8" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -pg -fno-exceptions -fvisibility=hidden" \ CXXFLAGS="-std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m64 -g -Os -pg -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" else ENV_CONFIGURE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ LANG="en_US.utf8" \ CPPFLAGS="-DU_DISABLE_RENAMING=1 $(DEFINE_BUILD_LEVEL)" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -fno-exceptions -fvisibility=hidden" \ CXXFLAGS="-std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" ENV= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ LANG="en_US.utf8" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -fno-exceptions -fvisibility=hidden" \ CXXFLAGS="-std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" ENV_DEBUG= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ LANG="en_US.utf8" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -O0 -gfull -fno-exceptions -fvisibility=hidden" \ CXXFLAGS="-std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -O0 -gfull -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" ENV_PROFILE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ LANG="en_US.utf8" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -pg -fno-exceptions -fvisibility=hidden" \ CXXFLAGS="-std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DICU_DATA_DIR_PREFIX_ENV_VAR=\"\\\"$(DATA_DIR_PREFIX_ENV_VAR)\\\"\" -m32 -g -Os -pg -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" endif else CPPOPTIONS = ENV_CONFIGURE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ CPPFLAGS="$(DEFINE_BUILD_LEVEL) -DSTD_INSPIRED -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) $(ISYSROOT) $(ENV_CONFIGURE_ARCHS)" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(APPLE_HARDENING_OPTS) $(ENV_CONFIGURE_ARCHS) $(ICU_TARGET_VERSION) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden $(ISYSROOT) $(THUMB_FLAG) $(CFLAGS_SANITIZER)" \ CXXFLAGS="--std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(ENV_CONFIGURE_ARCHS) $(ICU_TARGET_VERSION) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG) $(CXXFLAGS_SANITIZER)" \ RC_ARCHS="$(RC_ARCHS)" $(FORCEENDIAN)\ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" ENV= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(APPLE_HARDENING_OPTS) $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden $(ISYSROOT) $(THUMB_FLAG) $(CFLAGS_SANITIZER)" \ CXXFLAGS="--std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG) $(CXXFLAGS_SANITIZER)" \ RC_ARCHS="$(RC_ARCHS)" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" ENV_DEBUG= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(APPLE_HARDENING_OPTS) $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -O0 -gfull -Wglobal-constructors -fno-exceptions -fvisibility=hidden $(ISYSROOT) $(THUMB_FLAG) $(CFLAGS_SANITIZER)" \ CXXFLAGS="--std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -O0 -gfull -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG) $(CXXFLAGS_SANITIZER)" \ RC_ARCHS="$(RC_ARCHS)" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" ENV_PROFILE= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ CC="$(CC)" \ CXX="$(CXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(APPLE_HARDENING_OPTS) $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -pg -Wglobal-constructors -fno-exceptions -fvisibility=hidden $(ISYSROOT) $(THUMB_FLAG) $(CFLAGS_SANITIZER)" \ CXXFLAGS="--std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_FILES_DIR=\"\\\"$(TZDATA_LOOKUP_DIR)\\\"\" -DU_TIMEZONE_PACKAGE=\"\\\"$(TZDATA_PACKAGE)\\\"\" $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -pg -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG) $(CXXFLAGS_SANITIZER)" \ RC_ARCHS="$(RC_ARCHS)" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" ENV_CONFIGURE_BUILDHOST= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ CPPFLAGS="$(DEFINE_BUILD_LEVEL) -DSTD_INSPIRED -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) $(HOSTISYSROOT)" \ CC="$(HOSTCC)" \ CXX="$(HOSTCXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR_BUILDHOST)\\\"\" -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) -mmacosx-version-min=$(OSX_HOST_VERSION_MIN_STRING) $(HOSTISYSROOT) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden $(CFLAGS_SANITIZER)" \ CXXFLAGS="--std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR_BUILDHOST)\\\"\" -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) -mmacosx-version-min=$(OSX_HOST_VERSION_MIN_STRING) $(HOSTISYSROOT) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(CXXFLAGS_SANITIZER)" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" ENV_BUILDHOST= APPLE_INTERNAL_DIR="$(APPLE_INTERNAL_DIR)" \ CC="$(HOSTCC)" \ CXX="$(HOSTCXX)" \ CFLAGS="-DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR_BUILDHOST)\\\"\" -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) -mmacosx-version-min=$(OSX_HOST_VERSION_MIN_STRING) $(HOSTISYSROOT) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden $(CFLAGS_SANITIZER)" \ CXXFLAGS="--std=c++11 -DU_SHOW_CPLUSPLUS_API=1 -DU_SHOW_INTERNAL_API=1 -DU_TIMEZONE=timezone -DICU_DATA_DIR=\"\\\"$(DATA_LOOKUP_DIR_BUILDHOST)\\\"\" -DMAC_OS_X_VERSION_MIN_REQUIRED=$(MAC_OS_X_VERSION_MIN_REQUIRED) -mmacosx-version-min=$(OSX_HOST_VERSION_MIN_STRING) $(HOSTISYSROOT) -g -Os -Wglobal-constructors -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(CXXFLAGS_SANITIZER)" \ TZDATA="$(TZDATA)" \ DYLD_LIBRARY_PATH="$(DSTROOT)/usr/local/lib" endif ENV_icu = ENV ENV_debug = ENV_DEBUG ENV_profile = ENV_PROFILE ifeq "$(BUILD_TYPE)" "DEVICE" ORDERFILE=$(SDKPATH)/AppleInternal/OrderFiles/libicucore.order else ifeq "$(BUILD_TYPE)" "SIMULATOR" ORDERFILE=$(SRCROOT)/ICU_embedded.order else ORDERFILE=/usr/local/lib/OrderFiles/libicucore.order endif ifeq "$(shell test -f $(ORDERFILE) && echo YES )" "YES" SECTORDER_FLAGS=-sectorder __TEXT __text $(ORDERFILE) else SECTORDER_FLAGS= endif ################################# ################################# # TARGETS ################################# ################################# .PHONY : icu check installsrc installhdrs installhdrsint clean install debug debug-install \ crossbuildhost icutztoolsforsdk .DELETE_ON_ERROR : # Rule for adjusting sources for different train types. # Assumes current directory is icuSources to be patched. # This may be: # $(SRCROOT)/icuSources for installsrc, or # $(OBJROOT_CURRENT) if sources are copied for e.g. a local make. # # The various patchconfig files should assume the current directory is icuSources. # # Note that if sources have been installed by installsrc (only run as part of buildit or # submitproject for Apple platforms, not for Windows/Linux), then # $(SRCROOT)/installsrcNotRunFlag is not present, and # ADJUST_SOURCES has already been run. # Otherwise, if we are doing a local build (e.g. make check, make install), or if # sources were submitted using submitproject for non-Apple platforms (Windows/Linux) then # $(SRCROOT)/installsrcNotRunFlag is present, and # ADJUST_SOURCES has not been run (run it after copying sources to OBJROOT_CURRENT) # ADJUST_SOURCES = \ if test "$(WINDOWS)" = "YES"; then \ mv data/unidata/base_unidata/*.txt data/unidata/; \ mv data/unidata/norm2/base_norm2/*.txt data/unidata/norm2/; \ mv data/in/base_in/*.nrm data/in/; \ mv data/in/base_in/*.icu data/in/; \ elif test "$(LINUX)" = "YES"; then \ mv data/unidata/base_unidata/*.txt data/unidata/; \ mv data/unidata/norm2/base_norm2/*.txt data/unidata/norm2/; \ mv data/in/base_in/*.nrm data/in/; \ mv data/in/base_in/*.icu data/in/; \ fi icu debug profile : $(OBJROOT_CURRENT)/Makefile echo "# make for target"; (cd $(OBJROOT_CURRENT); \ $(MAKE) $($(ENV_$@)) || exit 1; \ if test "$(WINDOWS)" = "YES"; then \ (cd common; \ rc.exe /folibicuuc.res $(CPPFLAGS) -DU_RELEASE=1 -D_CRT_SECURE_NO_DEPRECATE -I. -I../i18n \ "-DDEFAULT_ICU_PLUGINS=\"/AppleInternal/lib/icu\" " -DU_LOCAL_SERVICE_HOOK=1 libicuuc.rc; \ ); \ (cd i18n; \ rc.exe /folibicuin.res $(CPPFLAGS) -DU_RELEASE=1 -D_CRT_SECURE_NO_DEPRECATE -I. -I../common libicuin.rc; \ ); \ if test "$@" = "debug"; then \ (cd common; \ LINK.EXE /subsystem:console /DLL /nologo /base:"0x4a800000" /DYNAMICBASE /DEBUG \ /IMPLIB:../lib/libicuuc_$@.lib /out:../lib/libicuuc_$@.dll \ *.o libicuuc.res ../stubdata/icudt.lib advapi32.lib; \ ); \ (cd i18n; \ LINK.EXE /subsystem:console /DLL /nologo /base:"0x4a900000" /DYNAMICBASE /DEBUG \ /IMPLIB:../lib/libicuin_$@.lib /out:../lib/libicuin_$@.dll \ *.o libicuin.res ../lib/libicuuc_$@.lib ../stubdata/icudt.lib advapi32.lib; \ ); \ else \ (cd common; \ rm -f ../lib/libicuuc.dll.manifest; \ if test "$(ARCH64)" = "YES"; then \ LINK.EXE /DLL /NXCOMPAT /DYNAMICBASE /DEBUG /OPT:REF /MANIFEST \ /IMPLIB:../lib/libicuuc.lib /out:../lib/libicuuc.dll \ *.o libicuuc.res ../stubdata/icudt.lib advapi32.lib; \ else \ LINK.EXE /DLL /NXCOMPAT /SAFESEH /DYNAMICBASE /DEBUG /OPT:REF /MANIFEST \ /IMPLIB:../lib/libicuuc.lib /out:../lib/libicuuc.dll \ *.o libicuuc.res ../stubdata/icudt.lib advapi32.lib; \ fi; \ mt.exe -nologo -manifest ../lib/libicuuc.dll.manifest -outputresource:"../lib/libicuuc.dll;2"; \ ); \ (cd i18n; \ rm -f ../lib/libicuin.dll.manifest; \ if test "$(ARCH64)" = "YES"; then \ LINK.EXE /DLL /NXCOMPAT /DYNAMICBASE /DEBUG /OPT:REF /MANIFEST \ /IMPLIB:../lib/libicuin.lib /out:../lib/libicuin.dll \ *.o libicuin.res ../lib/libicuuc.lib ../stubdata/icudt.lib advapi32.lib; \ else \ LINK.EXE /DLL /NXCOMPAT /SAFESEH /DYNAMICBASE /DEBUG /OPT:REF /MANIFEST \ /IMPLIB:../lib/libicuin.lib /out:../lib/libicuin.dll \ *.o libicuin.res ../lib/libicuuc.lib ../stubdata/icudt.lib advapi32.lib; \ fi; \ mt.exe -nologo -manifest ../lib/libicuin.dll.manifest -outputresource:"../lib/libicuin.dll;2"; \ ); \ fi; \ else \ if test "$(LINUX)" = "YES"; then \ if test "$(ARCH64)" = "YES"; then \ $($(ENV_$@)) $(CXX) \ -m64 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden \ $(CXXFLAGS) $(LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname,$($(INSTALLED_DYLIB_$@)) -Wl,-L/usr/lib64/ -ldl \ -o ./$($(INSTALLED_DYLIB_$@)) $(DYLIB_OBJS); \ else \ $($(ENV_$@)) $(CXX) \ -m32 -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden \ $(CXXFLAGS) $(LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname,$($(INSTALLED_DYLIB_$@)) -ldl \ -o ./$($(INSTALLED_DYLIB_$@)) $(DYLIB_OBJS); \ fi; \ else \ tmpfile=`mktemp -t weakexternal.XXXXXX` || exit 1; \ $(NM) -m $(RC_ARCHS:%=-arch %) $(DYLIB_OBJS) | fgrep "weak external" | fgrep -v "undefined" | sed -e 's/.*weak external[^_]*//' | sort | uniq | cat >$$tmpfile; \ if test ! "$(ICU_FOR_EMBEDDED_TRAINS)" = "YES"; then \ ZIPPERING_LDFLAGS=-Wl,-iosmac_version_min,12.0; \ fi; \ $($(ENV_$@)) $(CXX) -current_version $(ICU_VERS).$(ICU_SUBVERS) -compatibility_version 1 -dynamiclib -dynamic \ $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG) \ $(CXXFLAGS) $(LDFLAGS) $$ZIPPERING_LDFLAGS -single_module $(SECTORDER_FLAGS) -unexported_symbols_list $$tmpfile -dead_strip \ -install_name $(libdir)$($(INSTALLED_DYLIB_$@)) -o ./$($(INSTALLED_DYLIB_$@)) $(DYLIB_OBJS); \ if test "$@" = "icu"; then \ ln -fs $(INSTALLED_DYLIB) $(DYLIB); \ echo '# build' $(INFOTOOL) 'linked against' $(LIB_NAME) ; \ $($(ENV_$@)) $(CXX) --std=c++11 $(RC_ARCHS:%=-arch %) -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG) \ $(LDFLAGS) -dead_strip -o ./$(INFOTOOL) $(INFOTOOL_OBJS) -L./ -l$(LIB_NAME) ; \ echo '# build' $(TOOLS_DYLIB) 'linked against' $(LIB_NAME) ; \ $($(ENV_$@)) $(CXX) -current_version $(ICU_VERS).$(ICU_SUBVERS) -compatibility_version 1 -dynamiclib -dynamic \ $(RC_ARCHS:%=-arch %) $(ICU_TARGET_VERSION) -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) $(THUMB_FLAG) \ $(CXXFLAGS) $(LDFLAGS) -single_module \ -install_name $(locallibdir)$(TOOLS_DYLIB) -o ./$(TOOLS_DYLIB) $(TOOLS_DYLIB_OBJS) -L./ -l$(LIB_NAME) ; \ echo '# build' $(ICUZDUMPTOOL) 'linked against' $(TOOLSLIB_NAME) $(LIB_NAME) ; \ $($(ENV_$@)) $(LINK.cc) $(RC_ARCHS:%=-arch %) -g -Os $(ISYSROOT) $(THUMB_FLAG) --std=c++11 \ -dead_strip -o ./$(ICUZDUMPTOOL) $(ICUZDUMPTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME) -l$(LIB_NAME); \ fi; \ fi; \ if test -f ./$(DATA_BUILD_SUBDIR)/$(B_DATA_FILE); then \ ln -fs ./$(DATA_BUILD_SUBDIR)/$(B_DATA_FILE); \ fi; \ if test -f ./$(DATA_BUILD_SUBDIR)/$(L_DATA_FILE); then \ ln -fs ./$(DATA_BUILD_SUBDIR)/$(L_DATA_FILE); \ else \ DYLD_LIBRARY_PATH=$(ICUPKGTOOLIBS) \ $(ICUPKGTOOL) -tl ./$(DATA_BUILD_SUBDIR)/$(B_DATA_FILE) $(L_DATA_FILE); \ fi; \ printf $(TZDATA_FORMAT_STRING) > $(TZDATA_FORMAT_FILE); \ fi; \ ); crossbuildhost : $(CROSSHOST_OBJROOT)/Makefile echo "# make for crossbuild host"; (cd $(CROSSHOST_OBJROOT); \ $(MAKE) $($(ENV_BUILDHOST)) || exit 1; \ ); # For the install-icutztoolsforsdk target, SDKROOT will always be an OSX SDK root. icutztoolsforsdk : $(OBJROOT_CURRENT)/Makefile echo "# make icutztoolsforsdk"; (cd $(OBJROOT_CURRENT); \ $(MAKE) $($(ENV)) || exit 1; \ echo '# build' $(TOOLS_DYLIB_FORTOOLS) 'linked against' $(LIB_NAME) ; \ $($(ENV)) $(CXX) -current_version $(ICU_VERS).$(ICU_SUBVERS) -compatibility_version 1 -dynamiclib -dynamic \ -g -Os -fno-exceptions -fvisibility=hidden -fvisibility-inlines-hidden $(ISYSROOT) \ $(CXXFLAGS) $(LDFLAGS) -single_module \ -install_name $(locallibdir)$(TOOLS_DYLIB_FORTOOLS) -o ./$(TOOLS_DYLIB_FORTOOLS) $(TOOLS_DYLIB_OBJS_FORTOOLS) -L./ -l$(LIB_NAME) ; \ echo '# build' $(ZICTOOL) 'linked against' $(TOOLSLIB_NAME_FORTOOLS) ; \ $($(ENV_BUILDHOST)) $(CXX) --std=c++11 -g -Os -isysroot $(HOSTSDKPATH) \ $(LDFLAGS) -dead_strip -o ./$(ZICTOOL) $(ZICTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME_FORTOOLS) ; \ echo '# build' $(RESTOOL) 'linked against' $(TOOLSLIB_NAME_FORTOOLS) $(LIB_NAME) ; \ $($(ENV_BUILDHOST)) $(CXX) --std=c++11 -g -Os -isysroot $(HOSTSDKPATH) \ $(LDFLAGS) -dead_strip -o ./$(RESTOOL) $(RESTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME_FORTOOLS) -l$(LIB_NAME) ; \ echo '# build' $(PKGTOOL) 'linked against' $(TOOLSLIB_NAME_FORTOOLS) ; \ $($(ENV_BUILDHOST)) $(CXX) --std=c++11 -g -Os -isysroot $(HOSTSDKPATH) \ $(LDFLAGS) -dead_strip -o ./$(PKGTOOL) $(PKGTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME_FORTOOLS) ; \ echo '# build' $(TZ2ICUTOOL) 'linked against' $(TOOLSLIB_NAME_FORTOOLS) ; \ $($(ENV_BUILDHOST)) $(CXX) --std=c++11 -g -Os -isysroot $(HOSTSDKPATH) \ $(LDFLAGS) -dead_strip -o ./$(TZ2ICUTOOL) $(TZ2ICUTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME_FORTOOLS) ; \ echo '# build' $(GENBRKTOOL) 'linked against' $(TOOLSLIB_NAME_FORTOOLS) ; \ $($(ENV_BUILDHOST)) $(CXX) --std=c++11 -g -Os -isysroot $(HOSTSDKPATH) \ $(LDFLAGS) -dead_strip -o ./$(GENBRKTOOL) $(GENBRKTOOL_OBJS) -L./ -l$(TOOLSLIB_NAME_FORTOOLS) ; \ ); check : icu ifneq "$(CROSS_BUILD)" "YES" (cd $(OBJROOT_CURRENT); \ ICU_DATA=$(OBJROOT_CURRENT) $(MAKE) $(ENV) check; \ ); else $(warning check not supported for cross-build) endif check-debug: debug ifneq "$(CROSS_BUILD)" "YES" (cd $(OBJROOT_CURRENT); \ ICU_DATA=$(OBJROOT_CURRENT) $(MAKE) $(ENV_DEBUG) check; \ ); else $(warning check not supported for cross-build) endif samples: icu (cd $(OBJROOT_CURRENT)/samples; \ $(MAKE) $(ENV_DEBUG) $(LIBOVERRIDES); \ ); extra: icu (cd $(OBJROOT_CURRENT)/extra; \ $(MAKE) $(ENV_DEBUG) $(LIBOVERRIDES); \ ); ifneq "$(CROSS_BUILD)" "YES" $(OBJROOT_CURRENT)/Makefile : else $(OBJROOT_CURRENT)/Makefile : crossbuildhost endif if test ! -d $(OBJROOT_CURRENT); then \ mkdir -p $(OBJROOT_CURRENT); \ fi; cp -Rpf $(SRCROOT)/icuSources/* $(OBJROOT_CURRENT)/; (cd $(OBJROOT_CURRENT); \ if test -e $(SRCROOT)/installsrcNotRunFlag ; then $(ADJUST_SOURCES); fi; \ if test -f $(TZAUXFILESDIR)/metaZones.txt ; then cp -p $(TZAUXFILESDIR)/metaZones.txt data/misc/; fi; \ if test -f $(TZAUXFILESDIR)/timezoneTypes.txt ; then cp -p $(TZAUXFILESDIR)/timezoneTypes.txt data/misc/; fi; \ if test -f $(TZAUXFILESDIR)/windowsZones.txt ; then cp -p $(TZAUXFILESDIR)/windowsZones.txt data/misc/; fi; \ if test -f $(TZAUXFILESDIR)/icuregions ; then cp -p $(TZAUXFILESDIR)/icuregions tools/tzcode/; fi; \ if test -f $(TZAUXFILESDIR)/icuzones ; then cp -p $(TZAUXFILESDIR)/icuzones tools/tzcode/; fi; \ if test "$(WINDOWS)" = "YES"; then \ echo "# configure for target"; \ $(ENV_CONFIGURE) ./runConfigureICU Cygwin/MSVC $(CONFIG_FLAGS); \ elif test "$(LINUX)" = "YES"; then \ echo "# configure for target"; \ $(ENV_CONFIGURE) ./runConfigureICU Linux $(CONFIG_FLAGS); \ elif test "$(CROSS_BUILD)" = "YES"; then \ echo "# configure for crossbuild target"; \ $(ENV_CONFIGURE) ./configure --host=$(TARGET_SPEC) --with-cross-build=$(CROSSHOST_OBJROOT) $(CONFIG_FLAGS); \ else \ echo "# configure for non-crossbuild target"; \ $(ENV_CONFIGURE) ./runConfigureICU MacOSX $(CONFIG_FLAGS); \ fi; \ ); $(CROSSHOST_OBJROOT)/Makefile : if test ! -d $(CROSSHOST_OBJROOT); then \ mkdir -p $(CROSSHOST_OBJROOT); \ fi; cp -Rpf $(SRCROOT)/icuSources/* $(CROSSHOST_OBJROOT); (cd $(CROSSHOST_OBJROOT); \ if test -e $(SRCROOT)/installsrcNotRunFlag; then $(ADJUST_SOURCES); fi; \ if test -f $(TZAUXFILESDIR)/metaZones.txt ; then cp -p $(TZAUXFILESDIR)/metaZones.txt data/misc/; fi; \ if test -f $(TZAUXFILESDIR)/timezoneTypes.txt ; then cp -p $(TZAUXFILESDIR)/timezoneTypes.txt data/misc/; fi; \ if test -f $(TZAUXFILESDIR)/windowsZones.txt ; then cp -p $(TZAUXFILESDIR)/windowsZones.txt data/misc/; fi; \ if test -f $(TZAUXFILESDIR)/icuregions ; then cp -p $(TZAUXFILESDIR)/icuregions tools/tzcode/; fi; \ if test -f $(TZAUXFILESDIR)/icuzones ; then cp -p $(TZAUXFILESDIR)/icuzones tools/tzcode/; fi; \ echo "# configure for crossbuild host"; \ $(ENV_CONFIGURE_BUILDHOST) ./runConfigureICU MacOSX $(CONFIG_FLAGS); \ ); ################################# # B&I TARGETS ################################# # Since our sources are in icuSources (ignore the ICU subdirectory for now), we wish to # copy them to somewhere else. We tar it to stdout, cd to the appropriate directory, and # untar from stdin. # Do NOT include installsrcNotRunFlag in the list of files to tar up, that defeats the purpose. installsrc : if test ! -d $(SRCROOT); then mkdir $(SRCROOT); fi; if test -d $(SRCROOT)/icuSources ; then rm -rf $(SRCROOT)/icuSources; fi; tar cf - ./makefile ./ICU.plist ./LICENSE ./icuSources ./cldrFiles ./emojiData ./modules $(INSTALLSRC_VARFILES) | (cd $(SRCROOT) ; tar xfp -); \ (cd $(SRCROOT)/icuSources; $(ADJUST_SOURCES) ); # This works. Just not for ~ in the DSTROOT. We run configure first (in case it hasn't # been already). Then we make the install-headers target on specific makefiles (since # not every subdirectory/sub-component has a install-headers target). # installhdrs should be no-op for BUILD_TYPE=TOOL ifeq "$(BUILD_TYPE)" "TOOL" installhdrs : else installhdrs : installhdrsint endif MKINSTALLDIRS=$(SHELL) $(SRCROOT)/icuSources/mkinstalldirs INSTALL_DATA=${INSTALL} -m 644 ifneq "$(ICU_FOR_APPLE_PLATFORMS)" "YES" installhdrsint : $(OBJROOT_CURRENT)/Makefile else ifneq "$(RC_XBS)" "YES" installhdrsint : $(OBJROOT_CURRENT)/Makefile else installhdrsint : endif (if test -e $(SRCROOT)/installsrcNotRunFlag; then cd $(OBJROOT_CURRENT); else cd $(SRCROOT)/icuSources/; fi; \ $(MKINSTALLDIRS) $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode/; \ for subdir in $(HDR_MAKE_SUBDIR); do \ echo "# Subdir $$subdir"; \ (cd $$subdir/unicode; \ for i in *.h; do \ echo "$(INSTALL_DATA) $$i $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode/"; \ $(INSTALL_DATA) $$i $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode/ || exit; \ done; \ ); \ done; \ if test "$(ICU_FOR_EMBEDDED_TRAINS)" = "YES"; then \ if test ! -d $(DSTROOT)/$(HDR_PREFIX)/include/unicode/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(HDR_PREFIX)/include/unicode/; \ fi; \ if test -d $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode/; then \ (cd $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode; \ for i in *.h; do \ if fgrep -q -x $$i $(SRCROOT)/minimalapis.txt ; then \ mv $$i $(DSTROOT)/$(HDR_PREFIX)/include/unicode ; \ fi ; \ done ); \ if test ! "$(RC_XBS)" = "YES"; then \ echo "# Not building for XBS, so running minimal test"; \ $(CC) $(SRCROOT)/minimalapisTest.c $(INSTALLHDRS_ARCH) $(ISYSROOT) -nostdinc \ -I $(DSTROOT)/$(HDR_PREFIX)/include/ -I $(SDKPATH)/usr/include/ -E > /dev/null ; \ fi; \ fi; \ $(INSTALL_DATA) $(SRCROOT)/modules/embedded/module.modulemap $(DSTROOT)/$(HDR_PREFIX)/include/unicode/ ; \ $(INSTALL_DATA) $(SRCROOT)/modules/embedded/module.private.modulemap $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode/ ; \ else \ if test "$(ICU_FOR_APPLE_PLATFORMS)" = "YES"; then \ $(INSTALL_DATA) $(SRCROOT)/modules/macos/module.private.modulemap $(DSTROOT)/$(PRIVATE_HDR_PREFIX)/include/unicode/ ; \ fi; \ fi; \ ); # We run configure and run make first. This generates the .o files. We then link them # all up together into libicucore. Then we put it into its install location, create # symbolic links, and then strip the main dylib. Then install the remaining libraries. # We cleanup the sources folder. install : installhdrsint icu if test "$(WINDOWS)" = "YES"; then \ if test ! -d $(DSTROOT)/$(winprogdir)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(winprogdir)/; \ fi; \ if test ! -d $(DSTROOT)/$(winintlibdir)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(winintlibdir)/; \ fi; \ $(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuuc.lib $(DSTROOT)/$(winintlibdir)libicuuc.lib; \ $(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuuc.pdb $(DSTROOT)/$(winprogdir)libicuuc.pdb; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/libicuuc.dll $(DSTROOT)/$(winprogdir)libicuuc.dll; \ $(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuin.lib $(DSTROOT)/$(winintlibdir)libicuin.lib; \ $(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuin.pdb $(DSTROOT)/$(winprogdir)libicuin.pdb; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/libicuin.dll $(DSTROOT)/$(winprogdir)libicuin.dll; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/icudt$(ICU_VERS).dll $(DSTROOT)/$(winprogdir)icudt$(ICU_VERS).dll; \ else \ if test ! -d $(DSTROOT)/$(libdir)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(libdir)/; \ fi; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(INSTALLED_DYLIB) $(DSTROOT)/$(libdir)$(INSTALLED_DYLIB); \ if test "$(LINUX)" = "YES"; then \ if test ! -d $(SYMROOT_CURRENT)/; then \ $(INSTALL) -d -m 0755 $(SYMROOT_CURRENT)/; \ fi; \ cp $(OBJROOT_CURRENT)/$(INSTALLED_DYLIB) $(SYMROOT_CURRENT)/$(INSTALLED_DYLIB); \ strip -x -S $(DSTROOT)/$(libdir)$(INSTALLED_DYLIB); \ else \ (cd $(DSTROOT)/$(libdir); \ ln -fs $(INSTALLED_DYLIB) $(DYLIB)); \ cp $(OBJROOT_CURRENT)/$(INSTALLED_DYLIB) $(SYMROOT_CURRENT)/$(INSTALLED_DYLIB); \ $(DSYMTOOL) -o $(SYMROOT_CURRENT)/$(INSTALLED_DYLIB)$(DSYMSUFFIX) $(SYMROOT_CURRENT)/$(INSTALLED_DYLIB); \ $(STRIPCMD) -x -u -r -S $(DSTROOT)/$(libdir)$(INSTALLED_DYLIB); \ fi; \ for subdir in $(EXTRA_LIBS); do \ (cd $(OBJROOT_CURRENT)/$$subdir; $(MAKE) -e DESTDIR=$(DSTROOT)/ $(ENV) install-library;) \ done; \ if test ! -d $(DSTROOT)/$(DATA_INSTALL_DIR)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(DATA_INSTALL_DIR)/; \ fi; \ if test -f $(OBJROOT_CURRENT)/$(L_DATA_FILE); then \ $(INSTALL) -b -m 0444 $(OBJROOT_CURRENT)/$(L_DATA_FILE) $(DSTROOT)/$(DATA_INSTALL_DIR)$(L_DATA_FILE); \ fi; \ if test -f $(OBJROOT_CURRENT)/$(TZDATA_FORMAT_FILE); then \ $(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/$(TZDATA_FORMAT_FILE) $(DSTROOT)/$(DATA_INSTALL_DIR)$(TZDATA_FORMAT_FILE); \ fi; \ if test ! -d $(DSTROOT)/$(OPEN_SOURCE_VERSIONS_DIR)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(OPEN_SOURCE_VERSIONS_DIR)/; \ fi; \ $(INSTALL) -b -m 0644 $(SRCROOT)/ICU.plist $(DSTROOT)/$(OPEN_SOURCE_VERSIONS_DIR)ICU.plist; \ if test ! -d $(DSTROOT)/$(OPEN_SOURCE_LICENSES_DIR)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(OPEN_SOURCE_LICENSES_DIR)/; \ fi; \ $(INSTALL) -b -m 0644 $(SRCROOT)/LICENSE $(DSTROOT)/$(OPEN_SOURCE_LICENSES_DIR)ICU.txt; \ if test ! -d $(DSTROOT)/$(CLDRFILESDIR)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(CLDRFILESDIR)/; \ fi; \ $(INSTALL) -b -m 0644 $(SRCROOT)/cldrFiles/supplementalData.xml $(DSTROOT)/$(CLDRFILESDIR)/supplementalData.xml; \ $(INSTALL) -b -m 0644 $(SRCROOT)/cldrFiles/plurals.xml $(DSTROOT)/$(CLDRFILESDIR)/plurals.xml; \ if test ! -d $(DSTROOT)/$(EMOJI_DATA_DIR)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(EMOJI_DATA_DIR)/; \ fi; \ $(INSTALL) -b -m 0644 $(SRCROOT)/emojiData/charClasses.txt $(DSTROOT)/$(EMOJI_DATA_DIR)/charClasses.txt; \ $(INSTALL) -b -m 0644 $(SRCROOT)/emojiData/lineClasses.txt $(DSTROOT)/$(EMOJI_DATA_DIR)/lineClasses.txt; \ if test "$(LINUX)" != "YES"; then \ if test ! -d $(DSTROOT)/$(localtooldir)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(localtooldir)/; \ fi; \ if test -f $(OBJROOT_CURRENT)/$(INFOTOOL); then \ echo '# install' $(INFOTOOL) 'to' $(DSTROOT)/$(localtooldir)$(INFOTOOL) ; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(INFOTOOL) $(DSTROOT)/$(localtooldir)$(INFOTOOL); \ cp $(OBJROOT_CURRENT)/$(INFOTOOL) $(SYMROOT_CURRENT)/$(INFOTOOL); \ $(DSYMTOOL) -o $(SYMROOT_CURRENT)/$(INFOTOOL)$(DSYMSUFFIX) $(SYMROOT_CURRENT)/$(INFOTOOL); \ fi; \ if test ! -d $(DSTROOT)/$(locallibdir)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(locallibdir)/; \ fi; \ if test -f $(OBJROOT_CURRENT)/$(TOOLS_DYLIB); then \ echo '# install' $(TOOLS_DYLIB) 'to' $(DSTROOT)/$(locallibdir)$(TOOLS_DYLIB) ; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(TOOLS_DYLIB) $(DSTROOT)/$(locallibdir)$(TOOLS_DYLIB); \ cp $(OBJROOT_CURRENT)/$(TOOLS_DYLIB) $(SYMROOT_CURRENT)/$(TOOLS_DYLIB); \ $(DSYMTOOL) -o $(SYMROOT_CURRENT)/$(TOOLS_DYLIB)$(DSYMSUFFIX) $(SYMROOT_CURRENT)/$(TOOLS_DYLIB); \ fi; \ if test -f $(OBJROOT_CURRENT)/$(ICUZDUMPTOOL); then \ echo '# install' $(ICUZDUMPTOOL) 'to' $(DSTROOT)/$(localtooldir)$(ICUZDUMPTOOL) ; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(ICUZDUMPTOOL) $(DSTROOT)/$(localtooldir)$(ICUZDUMPTOOL); \ cp $(OBJROOT_CURRENT)/$(ICUZDUMPTOOL) $(SYMROOT_CURRENT)/$(ICUZDUMPTOOL); \ $(DSYMTOOL) -o $(SYMROOT_CURRENT)/$(ICUZDUMPTOOL)$(DSYMSUFFIX) $(SYMROOT_CURRENT)/$(ICUZDUMPTOOL); \ fi; \ fi; \ fi; DEPEND_install_debug = debug DEPEND_install_profile = profile .SECONDEXPANSION: install_debug install_profile : $$(DEPEND_$$@) if test "$(WINDOWS)" = "YES"; then \ if test ! -d $(DSTROOT)/$(winprogdir)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(winprogdir)/; \ fi; \ if test ! -d $(DSTROOT)/$(winintlibdir)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(winintlibdir)/; \ fi; \ $(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuuc_$(DEPEND_$@).lib $(DSTROOT)/$(winintlibdir)libicuuc_$(DEPEND_$@).lib; \ $(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuuc_$(DEPEND_$@).pdb $(DSTROOT)/$(winprogdir)libicuuc_$(DEPEND_$@).pdb; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/libicuuc_$(DEPEND_$@).dll $(DSTROOT)/$(winprogdir)libicuuc_$(DEPEND_$@).dll; \ $(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuin_$(DEPEND_$@).lib $(DSTROOT)/$(winintlibdir)libicuin_$(DEPEND_$@).lib; \ $(INSTALL) -b -m 0644 $(OBJROOT_CURRENT)/lib/libicuin_$(DEPEND_$@).pdb $(DSTROOT)/$(winprogdir)libicuin_$(DEPEND_$@).pdb; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/lib/libicuin_$(DEPEND_$@).dll $(DSTROOT)/$(winprogdir)libicuin_$(DEPEND_$@).dll; \ else \ if test ! -d $(DSTROOT)/$(libdir)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)/$(libdir)/; \ fi; \ $(INSTALL) -b -m 0664 $(OBJROOT_CURRENT)/$($(INSTALLED_DYLIB_$(DEPEND_$@))) $(DSTROOT)/$(libdir)$($(INSTALLED_DYLIB_$(DEPEND_$@))); \ if test "$(LINUX)" = "YES"; then \ if test ! -d $(SYMROOT_CURRENT)/; then \ $(INSTALL) -d -m 0755 $(SYMROOT_CURRENT)/; \ fi; \ cp $(OBJROOT_CURRENT)/$($(INSTALLED_DYLIB_$(DEPEND_$@))) $(SYMROOT_CURRENT)/$($(INSTALLED_DYLIB_$(DEPEND_$@))); \ strip -x -S $(DSTROOT)/$(libdir)$($(INSTALLED_DYLIB_$(DEPEND_$@))); \ else \ (cd $(DSTROOT)/$(libdir); \ ln -fs $($(INSTALLED_DYLIB_$(DEPEND_$@))) $($(DYLIB_$(DEPEND_$@)))); \ cp $(OBJROOT_CURRENT)/$($(INSTALLED_DYLIB_$(DEPEND_$@))) $(SYMROOT_CURRENT)/$($(INSTALLED_DYLIB_$(DEPEND_$@))); \ $(STRIPCMD) -x -u -r -S $(DSTROOT)/$(libdir)$($(INSTALLED_DYLIB_$(DEPEND_$@))); \ fi; \ for subdir in $(EXTRA_LIBS); do \ (cd $(OBJROOT_CURRENT)/$$subdir; $(MAKE) -e DESTDIR=$(DSTROOT)/ $(ENV) install-library;) \ done; \ fi; clean : -rm -rf $(OBJROOT) # For the install-icutztoolsforsdk target, SDKROOT will always be an OSX SDK root install-icutztoolsforsdk : icutztoolsforsdk if test ! -d $(DSTROOT)$(localtooldir)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)$(localtooldir)/; \ fi; if test ! -d $(DSTROOT)$(locallibdir)/; then \ $(INSTALL) -d -m 0755 $(DSTROOT)$(locallibdir)/; \ fi; if test -f $(OBJROOT_CURRENT)/$(TOOLS_DYLIB_FORTOOLS); then \ echo '# install' $(TOOLS_DYLIB_FORTOOLS) 'to' $(DSTROOT)$(locallibdir)$(TOOLS_DYLIB_FORTOOLS) ; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(TOOLS_DYLIB_FORTOOLS) $(DSTROOT)$(locallibdir)$(TOOLS_DYLIB_FORTOOLS); \ fi; if test -f $(OBJROOT_CURRENT)/$(ZICTOOL); then \ echo '# install' $(ZICTOOL) 'to' $(DSTROOT)$(localtooldir)$(ZICTOOL) ; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(ZICTOOL) $(DSTROOT)$(localtooldir)$(ZICTOOL); \ fi; if test -f $(OBJROOT_CURRENT)/$(RESTOOL); then \ echo '# install' $(RESTOOL) 'to' $(DSTROOT)$(localtooldir)$(RESTOOL) ; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(RESTOOL) $(DSTROOT)$(localtooldir)$(RESTOOL); \ fi; if test -f $(OBJROOT_CURRENT)/$(PKGTOOL); then \ echo '# install' $(PKGTOOL) 'to' $(DSTROOT)$(localtooldir)$(PKGTOOL) ; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(PKGTOOL) $(DSTROOT)$(localtooldir)$(PKGTOOL); \ fi; if test -f $(OBJROOT_CURRENT)/$(TZ2ICUTOOL); then \ echo '# install' $(TZ2ICUTOOL) 'to' $(DSTROOT)$(localtooldir)$(TZ2ICUTOOL) ; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(TZ2ICUTOOL) $(DSTROOT)$(localtooldir)$(TZ2ICUTOOL); \ fi; if test -f $(OBJROOT_CURRENT)/$(GENBRKTOOL); then \ echo '# install' $(GENBRKTOOL) 'to' $(DSTROOT)$(localtooldir)$(GENBRKTOOL) ; \ $(INSTALL) -b -m 0755 $(OBJROOT_CURRENT)/$(GENBRKTOOL) $(DSTROOT)$(localtooldir)$(GENBRKTOOL); \ fi;