.\" Copyright (c) 2004 Kungliga Tekniska Högskolan
.\" (Royal Institute of Technology, Stockholm, Sweden).
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\"
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\"
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" 3. Neither the name of the Institute nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\" $Id$
.\"
.Dd June 26, 2004
.Dt RTBL 3
.Os HEIMDAL
.Sh NAME
.Nm rtbl_create ,
.Nm rtbl_destroy ,
.Nm rtbl_set_flags ,
.Nm rtbl_get_flags ,
.Nm rtbl_set_prefix ,
.Nm rtbl_set_separator ,
.Nm rtbl_set_column_prefix ,
.Nm rtbl_set_column_affix_by_id ,
.Nm rtbl_add_column ,
.Nm rtbl_add_column_by_id ,
.Nm rtbl_add_column_entry ,
.Nm rtbl_add_column_entry_by_id ,
.Nm rtbl_new_row ,
.Nm rtbl_format
.Nd format data in simple tables
.Sh LIBRARY
The roken library (libroken, -lroken)
.Sh SYNOPSIS
.In rtbl.h
.Ft int
.Fn rtbl_add_column "rtbl_t table" "const char *column_name" "unsigned int flags"
.Ft int
.Fn rtbl_add_column_by_id "rtbl_t table" "unsigned int column_id" "const char *column_header" "unsigned int flags"
.Ft int
.Fn rtbl_add_column_entry "rtbl_t table" "const char *column_name" "const char *cell_entry"
.Ft int
.Fn rtbl_add_column_entry_by_id "rtbl_t table" "unsigned int column_id" "const char *cell_entry"
.Ft rtbl_t
.Fn rtbl_create "void"
.Ft void
.Fn rtbl_destroy "rtbl_t table"
.Ft int
.Fn rtbl_new_row "rtbl_t table"
.Ft int
.Fn rtbl_set_column_affix_by_id "rtbl_t table" "unsigned int column_id "const char *prefix" "const char *suffix"
.Ft int
.Fn rtbl_set_column_prefix "rtbl_t table" "const char *column_name" "const char *prefix"
.Ft "unsigned int"
.Fn rtbl_get_flags "rtbl_t table"
.Ft void
.Fn rtbl_set_flags "rtbl_t table" "unsigned int flags"
.Ft int
.Fn rtbl_set_prefix "rtbl_t table" "const char *prefix"
.Ft int
.Fn rtbl_set_separator "rtbl_t table" "const char *separator"
.Ft int
.Fn rtbl_format "rtbl_t table "FILE *file"
.Sh DESCRIPTION
This set of functions assemble a simple table consisting of rows and
columns, allowing it to be printed with certain options. Typical use
would be output from tools such as
.Xr ls 1
or
.Xr netstat 1 ,
where you have a fixed number of columns, but don't know the column
widths before hand.
.Pp
A table is created with
.Fn rtbl_create
and destroyed with
.Fn rtbl_destroy .
.Pp
Global flags on the table are set with
.Fa rtbl_set_flags
and retrieved with
.Fa rtbl_get_flags .
At present the only defined flag is
.Dv RTBL_HEADER_STYLE_NONE
which suppresses printing the header.
.Pp
Before adding data to the table, one or more columns need to be
created. This would normally be done with
.Fn rtbl_add_column_by_id ,
.Fa column_id
is any number of your choice (it's used only to identify columns),
.Fa column_header
is the header to print at the top of the column, and
.Fa flags
are flags specific to this column. Currently the only defined flag is
.Dv RTBL_ALIGN_RIGHT ,
aligning column entries to the right. Columns are printed in the order
they are added.
.Pp
There's also a way to add columns by column name with
.Fn rtbl_add_column ,
but this is less flexible (you need unique header names), and is
considered deprecated.
.Pp
To add data to a column you use
.Fn rtbl_add_column_entry_by_id ,
where the
.Fa column_id
is the same as when the column was added (adding data to a
non-existent column is undefined), and
.Fa cell_entry
is whatever string you wish to include in that cell. It should not
include newlines.
For columns added with
.Fn rtbl_add_column
you must use
.Fn rtbl_add_column_entry
instead.
.Pp
.Fn rtbl_new_row
fills all columns with blank entries until they all have the same
number of rows.
.Pp
Each column can have a separate prefix and suffix, set with
.Fa rtbl_set_column_affix_by_id ;
.Fa rtbl_set_column_prefix
allows setting the prefix only by column name. In addition to this,
columns may be separated by a string set with
.Fa rtbl_set_separator ( Ns
by default columns are not seprated by anything).
.Pp
The finished table is printed to
.Fa file
with
.Fa rtbl_format .
.Sh EXAMPLES
This program:
.Bd -literal -offset xxxx
#include <stdio.h>
#include <rtbl.h>
int
main(int argc, char **argv)
{
rtbl_t table;
table = rtbl_create();
rtbl_set_separator(table, " ");
rtbl_add_column_by_id(table, 0, "Column A", 0);
rtbl_add_column_by_id(table, 1, "Column B", RTBL_ALIGN_RIGHT);
rtbl_add_column_by_id(table, 2, "Column C", 0);
rtbl_add_column_entry_by_id(table, 0, "A-1");
rtbl_add_column_entry_by_id(table, 0, "A-2");
rtbl_add_column_entry_by_id(table, 0, "A-3");
rtbl_add_column_entry_by_id(table, 1, "B-1");
rtbl_add_column_entry_by_id(table, 2, "C-1");
rtbl_add_column_entry_by_id(table, 2, "C-2");
rtbl_add_column_entry_by_id(table, 1, "B-2");
rtbl_add_column_entry_by_id(table, 1, "B-3");
rtbl_add_column_entry_by_id(table, 2, "C-3");
rtbl_add_column_entry_by_id(table, 0, "A-4");
rtbl_new_row(table);
rtbl_add_column_entry_by_id(table, 1, "B-4");
rtbl_new_row(table);
rtbl_add_column_entry_by_id(table, 2, "C-4");
rtbl_new_row(table);
rtbl_format(table, stdout);
rtbl_destroy(table);
return 0;
}
.Ed
.Pp
will output the following:
.Bd -literal -offset xxxx
Column A Column B Column C
A-1 B-1 C-1
A-2 B-2 C-2
A-3 B-3 C-3
A-4
B-4
C-4
.Ed
.\" .Sh SEE ALSO