########################################################################
#
# Copyright (c) 2009, Secure Endpoints Inc.
# All rights reserved.
# 
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 
# - Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
# 
# - Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in
#   the documentation and/or other materials provided with the
#   distribution.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
# 

all::

clean::

test::

prep::

all:: prep

!include <Win32.Mak>

!ifdef NODEBUG
BUILD=rel
!else
BUILD=dbg
!endif

!if exist($(MAKEDIR)\windows\NTMakefile.w32)
SRC=$(MAKEDIR)
!elseif exist($(MAKEDIR)\..\windows\NTMakefile.w32)
SRC=$(MAKEDIR)\..
!elseif exist($(MAKEDIR)\..\..\windows\NTMakefile.w32)
SRC=$(MAKEDIR)\..\..
!elseif exist($(MAKEDIR)\..\..\..\windows\NTMakefile.w32)
SRC=$(MAKEDIR)\..\..\..
!else
!  error Cant determine source directory
!endif

!include "NTMakefile.config"

#----------------------------------------------------------------
# Directory macros

DESTDIR=$(SRC)\out\dest_$(OUTDIR)
OBJDIR =$(SRC)\out\obj_$(OUTDIR)

INCDIR =$(DESTDIR)\inc
LIBDIR =$(DESTDIR)\lib
BINDIR =$(DESTDIR)\bin
SBINDIR=$(BINDIR)
LIBEXECDIR=$(BINDIR)

!ifdef RELDIR
SRCDIR =$(SRC)\$(RELDIR)
OBJ    =$(OBJDIR)\$(RELDIR)
!else
OBJ    =$(OBJDIR)
!endif

# For tests:
PATH=$(PATH);$(BINDIR)

#----------------------------------------------------------------
# Command macros

RMAKE=nmake /nologo /f NTMakefile RECURSE=1
MKDIR=md
CP=copy /Y
LINK=link
LM=lib
RM=del /q
ECHO=echo
RC=rc

!ifndef AWK
AWK=gawk.exe
!endif

!ifndef YACC
YACC=bison.exe -y
!endif

!ifndef LEX
LEX=flex.exe
!endif

!ifndef PYTHON
PYTHON=python.exe
!endif

!ifndef PERL
PERL=perl.exe
!endif

!ifndef CMP
CMP=cmp.exe
!endif

# Only used for tests
!ifndef SH
SH=sh.exe
!endif

!ifndef SED
SED=sed.exe
!endif

#----------------------------------------------------------------
# External dependencies

# For pthread support to be enabled, both PTHREAD_INC and PTHREAD_LIB
# should be defined.  PTHREAD_INC should be the include directory
# where pthread.h is to be found (i.e. $(PTHREAD_INC)\pthread.h should
# exist), and PTHREAD_LIB is the full path to the pthread import
# library.
#
# Note that both paths should not contain any whitespace.

!ifdef PTHREAD_INC
pthreadinc= -I$(PTHREAD_INC)
!endif

#----------------------------------------------------------------
# Build options

cincdirs=$(cincdirs) -I$(INCDIR) -I$(INCDIR)\krb5 $(pthreadinc)
cdefines=$(cdefines) -DHAVE_CONFIG_H
cwarn=$(cwarn) -D_CRT_SECURE_NO_WARNINGS -wd4996 -wd4127 -wd4244 -wd4100

!if "$(CPU)"=="i386"
libmach=/machine:X86
!elseif "$(CPU)"=="AMD64"
libmach=/machine:X64
!else
!  error Unknown CPU value
!endif

!ifndef STATICRUNTIME

C2OBJ_C = $(CC) $(cdebug) $(cflags) $(cvarsdll) $(AUXCFLAGS) $(cdefines) $(cincdirs) $(cwarn)
EXECONLINK_C = $(LINK) $(ldebug) $(conlflags) $(conlibsdll)
EXEGUILINK_C = $(LINK) $(ldebug) $(guilflags) $(guilibsdll)
DLLCONLINK_C = $(LINK) $(ldebug) $(dlllflags) $(conlibsdll)
DLLGUILINK_C = $(LINK) $(ldebug) $(dlllflags) $(guilibsdll)

!else # STATICRUNTIME

C2OBJ_C = $(CC) $(cdebug) $(cflags) $(cvarsmt) $(AUXCFLAGS) $(cdefines) $(cincdirs) $(cwarn)
EXECONLINK_C = $(LINK) $(ldebug) $(conlflags) $(conlibsmt)
EXEGUILINK_C = $(LINK) $(ldebug) $(guilflags) $(guilibsmt)
DLLCONLINK_C = $(LINK) $(ldebug) $(dlllflags) $(conlibsmt)
DLLGUILINK_C = $(LINK) $(ldebug) $(dlllflags) $(guilibsmt)

!endif

LIBGUI_C = $(LM) /nologo $(libmach) /SUBSYSTEM:WINDOWS
LIBCON_C = $(LM) /nologo $(libmach) /SUBSYSTEM:CONSOLE

C2OBJ = $(C2OBJ_C) -Fo$@ -Fd$(@D)\ $**
EXECONLINK = $(EXECONLINK_C) -OUT:$@ $**
EXEGUILINK = $(EXEGUILINK_C) -OUT:$@ $**
DLLCONLINK = $(DLLCONLINK_C) -OUT:$@ $**
DLLGUILINK = $(DLLGUILINK_C) -OUT:$@ $**
LIBGUI = $(LIBGUI_C) /OUT:$@ $**
LIBCON = $(LIBCON_C) /OUT:$@ $**

# Preprocess files to stdout using config.h
CPREPROCESSOUT = $(CC) /EP /FI$(INCDIR)\config.h /TC /DCPP_ONLY=1

# Resources

RC2RES_C = $(RC) $(cincdirs) $(AUXRCFLAGS)
RC2RES = $(RC2RES_C) -fo $@ $**

#----------------------------------------------------------------------
# If this is the initial invocation, we check if all the build
# utilities are there.  Also show the commands macros.

!ifndef RECURSE

check-utils:
	@for %%g in ( "$(AWK)" "$(YACC)" "$(LEX)" "$(PYTHON)" "$(PERL)" "$(CMP)" ) do @( \
	for /f %%f in ( "%%g" ) do @( \
		if exist %%f @( \
			echo Found %%f \
		) else if "%%~$$PATH:f"=="" @( \
			echo Could not find %%f in PATH && \
			exit /b 1 \
		) else @( \
			echo Found %%~$$PATH:f \
		) \
	) \
	)
	@for %%g in ( "$(SH)" "$(SED)" ) do @( \
	for /f %%f in ( "%%g" ) do @( \
		if exist %%f @( \
			echo Found %%f \
		) else if "%%~$$PATH:f"=="" @( \
			echo Could not find %%f in PATH && \
			echo Test targets may fail. \
		) else @( \
			echo Found %%~$$PATH:f \
		) \
	) \
	)


prep:: check-utils

show-cmds:
	@$(ECHO) C2OBJ=$(C2OBJ_C:\=\\)
	@$(ECHO).
	@$(ECHO) EXECONLINK=$(EXECONLINK_C)
	@$(ECHO).
	@$(ECHO) EXEGUILINK=$(EXEGUILINK_C)
	@$(ECHO).
	@$(ECHO) DLLCONLINK=$(DLLCONLINK_C)
	@$(ECHO).
	@$(ECHO) DLLGUILINK=$(DLLGUILINK_C)
	@$(ECHO).
	@$(ECHO) LIBGUI=$(LIBGUI_C)
	@$(ECHO).
	@$(ECHO) LIBCON=$(LIBCON_C)

prep:: show-cmds

!endif

{}.c{$(OBJ)}.obj:
	$(C2OBJ)

{$(OBJ)}.c{$(OBJ)}.obj:
	$(C2OBJ)

{}.cpp{$(OBJ)}.obj:
	$(C2OBJ)

{$(OBJ)}.cpp{$(OBJ)}.obj:
	$(C2OBJ)

{}.hin{$(INCDIR)}.h:
	$(CP) $< $@

{}.h{$(INCDIR)}.h:
	$(CP) $< $@

{}.h{$(INCDIR)\krb5}.h:
	$(CP) $< $@

{$(OBJ)}.h{$(INCDIR)}.h:
	$(CP) $< $@

{$(OBJ)}.x{$(OBJ)}.c:
	$(CP) $< $@

{$(OBJ)}.hx{$(INCDIR)}.h:
	$(CP) $< $@

{$(OBJ)}.hx{$(OBJ)}.h:
	$(CP) $< $@

{}.rc{$(OBJ)}.res:
	$(RC2RES)

#----------------------------------------------------------------------
# Announce the build directory

!ifdef RELDIR
all:: announce

test:: announce

clean:: announce

announce:
	@echo.
	@echo --------- Entering $(RELDIR:\= ):
!endif

#----------------------------------------------------------------------
# Create any required directories if they don't already exist

prep:: mkdirs

mkdirs:
!  if !exist($(OBJ))
	$(MKDIR) $(OBJ)
!  endif
!  if !exist($(DESTDIR))
	$(MKDIR) $(DESTDIR)
!  endif
!  if !exist($(LIBDIR))
	$(MKDIR) $(LIBDIR)
!  endif
!  if !exist($(BINDIR))
	$(MKDIR) $(BINDIR)
!  endif
!  if !exist($(INCDIR))
	$(MKDIR) $(INCDIR)
!  endif
!  if !exist($(INCDIR)\gssapi)
	$(MKDIR) $(INCDIR)\gssapi
!  endif
!  if !exist($(INCDIR)\hcrypto)
	$(MKDIR) $(INCDIR)\hcrypto
!  endif
!  if !exist($(INCDIR)\kadm5)
	$(MKDIR) $(INCDIR)\kadm5
!  endif
!  if !exist($(INCDIR)\krb5)
	$(MKDIR) $(INCDIR)\krb5
!  endif

#----------------------------------------------------------------------
# If SUBDIRS is defined, we should recurse into the subdirectories

!ifdef SUBDIRS
subdirs:
	@for %%f in ( $(SUBDIRS) ) do @ (cd %%f && $(RMAKE) && cd ..) || exit /b 1

clean-subdirs:
	@for %%f in ( $(SUBDIRS) ) do @ (cd %%f && $(RMAKE) clean && cd ..) || exit /b 1

test-subdirs:
	@for %%f in ( $(SUBDIRS) ) do @ (cd %%f && $(RMAKE) test && cd ..) || exit /b 1

all:: subdirs

clean:: clean-subdirs

test:: test-subdirs

!endif

#----------------------------------------------------------------------
# Clean targets

!ifdef CLEANFILES
clean::
	-$(RM) $(CLEANFILES)
!endif
!ifdef RELDIR
clean::
	-$(RM) $(OBJ)\*.*
!endif

.SUFFIXES: .c .cpp .hin .h .x .hx

#----------------------------------------------------------------------
# Manifest handling
#
# Starting with Visual Studio 8, the C compiler and the linker
# generate manifests so that the applications will link with the
# correct side-by-side DLLs at run-time.  These are required for
# correct operation under Windows XP and later.  We also have custom
# manifests which need to be merged with the manifests that VS
# creates.
#
# The syntax for invoking the _VC_MANIFEST_EMBED_FOO macro is:
# $(_VC_MANIFEST_EMBED_???) <additional manifests>
#

MT=mt.exe -nologo

_VC_MANIFEST_EMBED_EXE= \
if exist $@.manifest $(MT) -outputresource:$@;1 -manifest $@.manifest

_VC_MANIFEST_EMBED_DLL= \
if exist $@.manifest $(MT) -outputresource:$@;2 -manifest $@.manifest

# Note that if you are merging manifests, then the VS generated
# manifest should be cleaned up after calling _VC_MANIFEST_EMBED_???.
# This ensures that even if the DLL or EXE is executed in-place, the
# embedded manifest will be used.  Otherwise the $@.manifest file will
# be used.

_VC_MANIFEST_CLEAN= \
if exist $@.manifest $(RM) $@.manifest

# End of manifest handling

# Code signing
!ifdef CODESIGN
_CODESIGN=$(CODESIGN) $@
!else
_CODESIGN=
!endif

#----------------------------------------------------------------------
# Convenience macros for preparing EXEs and DLLs.  These are multiline
# macros that deal with manifests and code signing.  Unless we need to
# include custom manifests, these are what we should be using to
# prepare binaries.

EXEPREP=\
$(_VC_MANIFEST_EMBED_EXE)^
$(_VC_MANIFEST_CLEAN)^
$(_CODESIGN)

EXEPREP_NODIST=\
$(_VC_MANIFEST_EMBED_EXE)^
$(_VC_MANIFEST_CLEAN)

DLLPREP=\
$(_VC_MANIFEST_EMBED_DLL)^
$(_VC_MANIFEST_CLEAN)^
$(_CODESIGN)

DLLPREP_NODIST=\
$(_VC_MANIFEST_EMBED_DLL)^
$(_VC_MANIFEST_CLEAN)

#----------------------------------------------------------------------
# Convenience macros for import libraries
#

LIBROKEN    =$(LIBDIR)\libroken.lib
LIBVERS	    =$(LIBDIR)\libvers.lib
LIBEDITLINE =$(LIBDIR)\libeditline.lib
LIBCOMERR   =$(LIBDIR)\libcom_err.lib
LIBSL	    =$(LIBDIR)\libsl.lib
LIBWIND	    =$(LIBDIR)\libwind.lib
LIBASN1	    =$(LIBDIR)\libasn1.lib
LIBSQLITE   =$(LIBDIR)\libsqlite.lib
LIBHCRYPTO  =$(LIBDIR)\libhcrypto.lib
LIBHX509    =$(LIBDIR)\libhx509.lib
LIBKRB5	    =$(LIBDIR)\libkrb5.lib
LIBHEIMNTLM =$(LIBDIR)\libheimntlm.lib
LIBHEIMIPCC =$(LIBDIR)\libheim-ipcc.lib
LIBHEIMIPCS =$(LIBDIR)\libheim-ipcs.lib
LIBGSSAPI   =$(LIBDIR)\libgssapi.lib
LIBHDB	    =$(LIBDIR)\libhdb.lib
LIBKADM5SRV =$(LIBDIR)\libkadm5srv.lib
LIBKADM5CLNT=$(LIBDIR)\libkadm5clnt.lib
LIBKDC	    =$(LIBDIR)\libkdc.lib
LIBTFM	    =$(LIBDIR)\libtfm.lib