<!-- Session manager configuration -->
<sm>
<!-- Our ID on the network (default: sm) -->
<id>sm</id>
<!-- The process ID file. Comment this out if you don't need to know
the process ID from outside the process (eg for control scripts) -->
<pidfile>/var/run/jabberd_notification/sm.pid</pidfile>
<!-- Router connection configuration -->
<router>
<!-- IP/port the router is waiting for connections on -->
<ip>127.0.0.1</ip> <!-- default: 127.0.0.1 -->
<port>5348</port> <!-- default: 5347 -->
<!-- Username/password to authenticate as -->
<user>jabberd</user> <!-- default: jabberd -->
<pass>@ROUTERPASSWORD@</pass> <!-- default: secret -->
<!-- File containing an SSL certificate and private key to use when
setting up an encrypted channel with the router. From
SSL_CTX_use_certificate_chain_file(3): "The certificates must be
in PEM format and must be sorted starting with the subject's
certificate (actual client or server certificate), followed
by intermediate CA certificates if applicable, and ending
at the highest level (root) CA" (the latter one being optional).
If this is commented out, or the file can't be read, no attempt
will be made to establish an encrypted channel with the router. -->
<!--<pemfile/>-->
<!-- Password for private key if key in router pemfile is encrypted -->
<!--<private_key_password/>-->
<!-- Router connection retry -->
<retry>
<!-- If the connection to the router can't be established at
startup, we should try again this many times before exiting.
Use -1 to retry indefinitely. [default: 3] -->
<init>3</init>
<!-- If we lost the connection to the router during normal
operation (ie we've successfully connected to the router in
the past), we should try to reconnect this many times before
exiting. Use -1 to retry indefinitely. [default: 3] -->
<lost>3</lost>
<!-- Sleep for this many seconds before trying attempting a
reconnect. [default: 2] -->
<sleep>2</sleep>
</retry>
</router>
<!-- Log configuration - type is "syslog", "file" or "stdout" -->
<log type='syslog'>
<!-- If logging to syslog, this is the log ident -->
<ident>jabberd_notification/sm</ident>
<!-- If logging to syslog, this is the log facility
(local0 - local7, log_user) [default: local3] -->
<facility>log_user</facility>
<!-- If logging to file, this is the filename of the logfile -->
<!--
<file>/usr/var/jabberd/log/sm.log</file>
-->
</log>
<!-- Local network configuration -->
<local>
<!-- Who we identify ourselves as.
Users will have this as the domain part of their JID.
If you want your server to be accessible from other
Jabber servers, this IDs must be FQDN resolvable by DNSes.
If not set, the SM id is used. -->
<id>@HOSTNAME@</id>
<!--
<id>vhost1.localdomain</id>
<id>vhost2.localdomain</id>
-->
</local>
<!-- Storage database configuration -->
<storage>
<!-- Dynamic storage modules path -->
<path>/var/jabberd/modules/jabberd2</path>
<!-- By default, we use the SQLite driver for all storage -->
<driver>sqlite</driver>
<!-- Its also possible to explicitly list alternate drivers for
specific data types. -->
<!-- Store vcards in a ldapvcard database instead -->
<!--
<driver type='vcard'>ldapvcard</driver>
-->
<!-- Read mapping for group id <-> group name from ldap.
Used by mod_published_roster.
See ldapvcard section for options.
When resolving group id to group name, it searches for
groupsobjectclass objects at groupsdn base using group id
(in groupsidattr) as key and returns the first value of
groupattr of first found entry.
E.g.. in general case, if group id is "some-dep", and groupsdn
is o=org, and class is jabberGroup, it searches for
(&(objectClass=jabberGroup)(cn=some-dep)) and returns value of
jabberPublishedItem attribute, which may contain textual description.
-->
<!--
<driver type='published-roster-groups'>ldapvcard</driver>
-->
<!-- SQLite driver configuration -->
<sqlite>
<!-- Database name -->
<dbname>/private/var/jabberd/sqlite/jabberd2_notification.db</dbname>
<!-- Transacation support. If this is commented out, transactions
will be disabled. This might make database accesses faster,
but data may be lost if jabberd crashes. -->
<transactions/>
<!-- SQLite busy-timeout in milliseconds. -->
<busy-timeout>5000</busy-timeout>
</sqlite>
<!-- MySQL driver configuration -->
<mysql>
<!-- Database server host and port -->
<host>localhost</host>
<port>3306</port>
<!-- Database name -->
<dbname>jabberd2</dbname>
<!-- Database username and password -->
<user>jabberd2</user>
<pass>secret</pass>
<!-- Transacation support. If this is commented out, transactions
will be disabled. This might make database accesses faster,
but data may be lost if jabberd crashes.
This will need to be disabled if you are using a MySQL
earlier than v3.23.xx, as transaction support did not appear
until this version. -->
<transactions/>
</mysql>
<!-- PostgreSQL driver configuration -->
<pgsql>
<!-- PostgreSQL connection info.
For the rest of the options see
http://www.postgresql.org/docs/8.0/interactive/libpq.html -->
<conninfo>dbname=jabberd2 user=jabberd2 password=secret</conninfo>
<!-- Alternatively you may set connection settings separately.
These are used only in absence of 'conninfo' -->
<!-- Database server host and port -->
<host>localhost</host>
<port>5432</port>
<!-- Database name -->
<dbname>jabberd2</dbname>
<!-- Database username and password -->
<user>jabberd2</user>
<pass>secret</pass>
<!-- Transacation support. If this is commented out, transactions
will be disabled. This might make database accesses faster,
but data may be lost if jabberd crashes. -->
<transactions/>
</pgsql>
<!-- Berkeley DB driver configuration. This does not support roster
maxitems or offline userquota (because the mod_roster
implementation does not implement the 'count' callback). -->
<db>
<!-- Directory to store database files under -->
<path>/usr/var/jabberd/db</path>
<!-- Synchronize the database to disk after each write. If you
disable this, database accesses may be faster, but data may
be lost if jabberd crashes. -->
<sync/>
</db>
<!-- Oracle driver configuration -->
<oracle>
<!-- Database server host and port. -->
<host>localhost</host>
<port>1521</port>
<!-- Database name -->
<dbname>jabberd2</dbname>
<!-- Database username and password -->
<user>jabberd2</user>
<pass>secret</pass>
</oracle>
<!-- Filesystem driver configuration -->
<fs>
<!-- Directory to store database files under. -->
<path>/usr/var/lib/jabberd2/fs</path>
</fs>
<!-- LDAPVCARD driver configuration -->
<ldapvcard>
<!-- LDAP server host and port (default: 389) -->
<uri>ldap://localhost/ ldaps://ldap.example.com/</uri>
<!-- DN to bind as for searches. If unspecified, the searches
will be done anonymously. -->
<!--
<binddn>cn=Directory Manager</binddn>
<bindpw>secret</bindpw>
-->
<!-- see authreg.ldapfull int c2s.xml for description. -->
<!--
<type>ad</type>
-->
<!-- LDAP attribute that holds the user ID (default: uid) -->
<uidattr>uid</uidattr>
<objectclass>posixAccount</objectclass>
<pwattr>userPassword</pwattr>
<!-- if you use included jabberd.schema use this:
<uidattr>jid</uidattr>
<objectclass>jabberUser</objectclass>
<pwattr>jabberPassword</pwattr>
-->
<!-- see authreg.ldapfull int c2s.xml for description. -->
<!--
<validattr>valid</validattr>
-->
<!-- base DN of the tree. You should specify a DN for each
authentication realm declared in the <local/> section above,
by using the realm attribute. -->
<basedn>o=Example Corp.</basedn>
<!-- attribute that holds published group name or id,
jabberPublishedGroup if not set -->
<!--
<groupattr>jabberPublishedGroup</groupattr>
-->
<!-- boolean attribute that tells, publish or not this user
jabberPublishedItem by default -->
<!--
<publishedattr>jabberPublishedItem</publishedattr>
-->
<!-- If value specified, then keep cache of "published-roster"
database. Cache is renewed when kept more seconds than value
specified. Setting this value increases perfomance of publishing
roster. If not specified, then we don't keep cache. -->
<publishedcachettl>60</publishedcachettl>
<mapped-groups>
<!-- If turned on, then reading mapping of group ids to names with
LDAP will works. -->
<!--
<map-groups/>
-->
<!-- base for searches for group id to group name mappings -->
<basedn>ou=jabbergroups, o=Example Corp.</basedn>
<!-- what objectclass to search, jabberGroup by default -->
<!--
<objectclass>jabberGroup</objectclass>
-->
<!-- what attribute to search, cn by default -->
<!--
<idattr>cn</idattr>
-->
<!-- attribute with text group name, description by default -->
<!--
<nameattr>description</nameattr>
-->
</mapped-groups>
</ldapvcard>
<limits>
<!-- Maximum database queries per second, per user - if more than X queries are
triggered by a single user in Y seconds, that user is disconnected, and throttled
for Z seconds. A database query attempt during the throttle period will result
in the user being disconnected again.
NOTE: Only applies to roster-groups and vcard operations at the present.
The format is:
<queries seconds='Y' throttle='Z'>X</queries>
Default Y is ?, default Z is ?. set X to 0 to disable. -->
<!-- <queries seconds='20' throttle='160'>300</queries> -->
<queries seconds='20' throttle='160'>0</queries>
</limits>
</storage>
<!-- Access control information -->
<aci>
<!-- The JIDs listed here will get access to all restricted
functions, regardless of restrictions further down -->
<!--<acl type='all'><jid>admin@localhost.localdomain</jid></acl>-->
<!-- These JIDs can send broadcast messages (announce, motd) -->
<!--
<acl type='broadcast'>
<jid>nocstaff1@localhost.localdomain</jid>
<jid>nocstaff2@localhost.localdomain</jid>
</acl>
-->
<!-- These JIDs will receive messages addressed to the sm itself
(help requestes and such) -->
<!--
<acl type='messages'>
<jid>support@localhost.localdomain</jid>
</acl>
-->
<!-- These JIDs can discover active user/session information -->
<!--
<acl type='disco'>
<jid>webstatus@localhost.localdomain</jid>
</acl>
-->
<!-- Apple: mod_deliver masquerading for message sender. Intended for use with
Apple Notification server's cluster client connections.
Messages from JIDs listed in the 'masquerade_sender' ACL will have the masq_sender_replacement value
inserted into the 'from' attribute for the outgoing message, instead of the sender's actual JID. -->
<!-- Example:
<masq_sender_replacement>pubsub.hostname.example.com</masq_sender_replacement>
<acl type='masquerade_sender'>
<jid>pubsub1@hostname.example.com</jid>
<jid>pubsub2@hostname.example.com</jid>
</acl>
-->
</aci>
<!-- Module chain configuration
Modules listed in a chain are called in the order specified at
the appropriate time for that chain (assuming that the module
knows how to work with that chain; otherwise it simply ignores
it).
Removing a module from these lists will stop the module being
called, even if its compiled into the server.
Serveral modules have a presence in more than one chain. It is
possible to remove a module from one chain but not others, but
this may cause strange behaviour. Make sure you know what you're
doing. -->
<modules>
<!-- Dynamic sm modules path -->
<path>/var/jabberd/modules/jabberd2</path>
<!-- sess-start. The modules in this chain are called when a session
is first started (usually on request by c2s as part of the
authentication process). This is normally used to load
per-session data. -->
<chain id='sess-start'>
<!--<module>status</module>--> <!-- record status information -->
</chain>
<!-- sess-end. The modules in this chain are called just before a
session is destroyed (after the client has disconnected). -->
<chain id='sess-end'>
<!--<module>status</module>--> <!-- update status information -->
<module>iq-last</module> <!-- update logout time -->
</chain>
<!-- in-sess. The modules in this chain are called when a packet
arrives from an active user session. Note that this chain is
also responsible for delivering packets to their destinations -
this is usually handled by the "deliver" module. -->
<chain id='in-sess'>
<module>validate</module> <!-- validate packet type -->
<!--<module>status</module>--> <!-- update status information -->
<module>privacy</module> <!-- manage privacy lists -->
<module>roster</module> <!-- handle roster get/sets and s10ns -->
<module>vacation</module> <!-- manage vacation settings -->
<!-- <module>pep</module> <!- - personal eventing -->
<module>iq-vcard</module> <!-- store and retrieve the user's vcard -->
<module>iq-ping</module> <!-- return the server ping -->
<module>iq-private</module> <!-- manage the user's private data store -->
<module>disco</module> <!-- respond to agents requests from sessions -->
<module>amp</module> <!-- advanced message processing -->
<module>offline</module> <!-- if we're coming online for the first time, deliver queued messages -->
<module>announce</module> <!-- deliver motd -->
<module>presence</module> <!-- process and distribute presence updates -->
<module>deliver</module> <!-- deliver packets with full jids directly -->
</chain>
<!-- out-sess. The modules in this chain are called just before a
packet is delivered to an active user session. -->
<chain id='out-sess'>
<!-- <module>pep</module> <!- - personal eventing -->
</chain>
<!-- in-router. The modules in this chain are called when a packet
arrives from the router (ie another component or s2s), but
before any processing is done. This is a good place to filter
incoming packets. -->
<chain id='in-router'>
<module>session</module> <!-- perform session actions as required by c2s -->
<module>validate</module> <!-- validate packet type -->
<module>presence</module> <!-- drop incoming presence if user not online -->
<module>privacy</module> <!-- filter incoming packets based on privacy rules -->
</chain>
<!-- out-router. The modules in this chain are called just before a
packet is delivered to the router (destined for another
component or s2s). This is a good place to filter outgoing
packets. -->
<chain id='out-router'>
<module>privacy</module> <!-- filter outgoing packets based on privacy rules -->
</chain>
<!-- pkt-sm. The modules in this chain are called when a packet
arrives that is addressed to the session manager itself (ie the
to JID has no node part). This is normally used to provide
session-manager-wide services (like service discovery). -->
<chain id='pkt-sm'>
<module>iq-last</module> <!-- return the server uptime -->
<module>iq-ping</module> <!-- return the server ping -->
<module>iq-time</module> <!-- return the current server time -->
<module>iq-version</module> <!-- return the server name and version -->
<module>amp</module> <!-- advanced message processing -->
<module>disco</module> <!-- build the disco list; respond to disco queries -->
<module>announce</module> <!-- send broadcast messages (announce, motd, etc) -->
<module>help</module> <!-- resend sm messages to administrators -->
<module>echo</module> <!-- echo messages sent to /echo -->
<!--<module>status</module>--> <!-- track status information -->
<module>presence</module> <!-- proces server presence subscriptions -->
</chain>
<!-- pkt-user. The modules in this chain are called when a packet
arrives that is address to a specific user. Note that this
chain is also responsible for delivering packets to user
sessions as appropriate - this is usually handled by the
"deliver" module. -->
<chain id='pkt-user'>
<module>roster</module> <!-- handle s10n responses -->
<module>presence</module> <!-- process and distribute incoming presence from external entities -->
<module>iq-vcard</module> <!-- grab user vcards -->
<module>amp</module> <!-- advanced message processing -->
<module>deliver</module> <!-- deliver the packet to an active session if we can -->
<module>vacation</module> <!-- send vacation messages -->
<module>offline</module> <!-- save messages and s10ns for later -->
<module>iq-last</module> <!-- return time since last logout -->
</chain>
<!-- pkt-router. The modules in this chain are called when a
special-purpose packet arrives from the router (eg domain
advertisements). -->
<chain id='pkt-router'>
<module>session</module> <!-- take sessions offline if their c2s disappears -->
<module>disco</module> <!-- query new components for service information -->
</chain>
<!-- user-load. The modules in this chain are called to load
per-user data. This will happen before a user can be used (ie
before a session is created). -->
<chain id='user-load'>
<module>active</module> <!-- get active status -->
<module>roster</module> <!-- load the roster and trust list -->
<module>roster-publish</module> <!-- load the published roster -->
<module>privacy</module> <!-- load privacy lists -->
<module>vacation</module> <!-- load vacation settings -->
</chain>
<!-- user-create. The modules in this chain are called when a user
creation request is received (usually from c2s as part of a
registration request). This initialises any per-user data. -->
<chain id='user-create'>
<module>active</module> <!-- activate new users -->
<module>template-roster</module> <!-- populate roster from template -->
</chain>
<!-- user-delete. The modules in this chain are called when a user
deletion request is received (usually from c2s as part of a
registration removal request). This deletes all data that may
have been previously created for the user during normal
operation. -->
<chain id='user-delete'>
<module>active</module> <!-- deactivate users -->
<module>announce</module> <!-- delete motd data -->
<module>offline</module> <!-- bounce queued messages -->
<module>privacy</module> <!-- delete privacy lists -->
<module>roster</module> <!-- delete roster -->
<module>vacation</module> <!-- delete vacation settings -->
<!--<module>status</module>--> <!-- delete status information -->
<module>iq-last</module> <!-- delete last logout time -->
<module>iq-private</module> <!-- delete private data -->
<module>iq-vcard</module> <!-- delete vcard -->
</chain>
<!-- disco-extend. The modules in this chain are called when a disco
info request is send to session manager. It implements XEP-0128
Service Discovery Extensions mechanizm to add additional
information to disco#info reply. -->
<chain id='disco-extend'>
<module>iq-version</module> <!-- add XEP-xxxx Software Information -->
<module>help</module> <!-- add XEP-0157 Contact Addresses -->
</chain>
</modules>
<!-- Service discovery configuration -->
<discovery>
<!-- Service identity. these specify the category, type and name of
this service that will be included in discovery information
responses. -->
<identity>
<category>server</category> <!-- default: server -->
<type>im</type> <!-- default: im -->
<name>Jabber IM server</name> <!-- default: Jabber IM server -->
</identity>
<!-- The discovery module can respond to jabber:iq:agents queries
for compatibility with older clients. Comment this out to
disable this. -->
<agents/>
<!-- Static service list.
The discover module can discover disco-capable services
automatically as they come online. Most XEP-0114 components,
however, will not support discovery. In order to get them to
appear in disco/agents lists returned to the client, they
should be listed here.
Note that if a disco-capable service with the same name as one
listed below comes online, the information it provides will
override the information listed below.
The "category" and "type" attributes, and the list of supported
namespaces are only used for agents compatibility. If you have
disabled this above, you may omit them. -->
<items>
<!-- example entry for a user directory -->
<!--
<item category='service' type='jud' jid='users.jabber.org' name='Jabber User Directory'/>
-->
<!-- example entry for a groupchat (conference) service -->
<!--
<item category='conference' type='public' jid='conference.jabber.org' name='Text conferencing'/>
-->
</items>
<!-- Server information added to server discovery information
in http://jabber.org/network/serverinfo jabber:x:data form. (XEP-0157)
May contain many values per item -->
<!--
<serverinfo>
<admin-addresses>
<value>mailto:xmpp@localhost.localdomain</value>
<value>xmpp:admins@localhost.localdomain</value>
</admin-addresses>
<abuse-addresses>
<value>mailto:abuse@localhost.localdomain</value>
<value>xmpp:abuse@localhost.localdomain</value>
</abuse-addresses>
<feedback-addresses>
<value>http://example.org/feedback.php</value>
</feedback-addresses>
<sales-addresses/>
<security-addresses/>
<support-addresses/>
</serverinfo>
-->
</discovery>
<!-- User options -->
<user>
<!-- By default, users must explicitly created before they can start
a session. The creation process is usually triggered by a c2s
component in response to a client registering a new user.
Enableing this option will make it so that a user create will be
triggered the first time a non-existant user attempts to start
a session. This is useful if you already have users in an
external authentication database (eg LDAP) and you don't want
them to have to register. -->
<auto-create/>
<!-- Define maximum size in bytes of fields of vcards.
There is a recommendation that the avatar picture SHOULD NOT
be larger than 16 KiB. -->
<vcard>
<max-field-size>
<default>32768</default>
<avatar>32768</avatar>
</max-field-size>
</vcard>
<!-- Templates. If defined, the contents of these files will be
stored in the users data store when they are created. -->
<template>
<!-- Uncomment <publish> if you wish to forcely publish
roster template from ldap on each user login -->
<!--
<publish>
-->
<!-- Key used for fetching published roster items.
Only one might be set at a time.
If not set, all items are fetched. -->
<!--
<fetch-key>
<domain/>
<user/>
<fixed>grouping-key</fixed>
</fetch-key>
-->
<!-- If <check-remove-domain> given, then published contact checked
against sm user database and if user is unknown to sm, contact
will be deleted from user's roster (if it is in roster). -->
<!--
<check-remove-domain>jabber.example.com</check-remove-domain>
-->
<!-- Keep cache of "active" database specified number of seconds.
This will significantly speed up publishing of roster.
If unspecified or 0, no cache is used. -->
<active-cache-ttl>60</active-cache-ttl>
<!-- If <fix-subscriptions/> is not commented, set subscriptions of
user's contacts to subscriptions of corresponding published
contacts. As for now, "both". -->
<!--
<fix-subscriptions/>
-->
<!-- If <override-names/> is not commented, then displayed names of
contacts in user's roster will be updated accordingly to
published roster (if they differ). If commented, then user can
rename contacs in roster -->
<!--
<override-names/>
-->
<!-- when mapped-groups is on (<map-groups/> is uncommented, the actual
group names for published contacts are read from
published-roster-groups storage type, which in turn may be mapped
to ldapvcard driver. The key for searching is published user's
group, and returned value is used as group name. So you can assign
textual group IDs to users rather then group names.
group-cache-ttl keeps cache of mapping group id <-> group name for
specified number of seconds. If unspecified or 0, no cache is used.
-->
<!--
<mapped-groups>
<map-groups/>
<group-cache-ttl>120</group-cache-ttl>
</mapped-groups>
-->
<!-- If <force-groups> is commented out, published roster's contact
added to user's roster only when user does not have this contact.
If <force-groups> is not commented out, then these checks performed
against roster item when publishing roster item that already in
user's roster:
If user already has added his roster's contact to group of
published contact, no changes are made with this group (note
that contact may be in more than one group).
If <prefix> given, then prefix of each group of user's compared
whith given prefix, and if it matches, user's contact removed from
matched group (see below).
Same for <suffix>.
After that, user's contact added to a group of published roster's
contact.
In other words, all groups of updated contact, that match prefix
or suffix, replaced with group of published contact.
This is done because there is no way to determine that group was
published or greated by user. -->
<!--
<force-groups>
<prefix>MyOrg.</prefix>
<suffix>(MyOrg)</suffix>
</force-groups>
-->
<!--
</publish>
-->
<!-- If defined, the contents of these files will be
stored in the users data store when they are created. -->
<!-- If you defined publish, you should comment-out <roster> -->
<!--
<roster>/etc/jabberd/templates/roster.xml</roster>
-->
</template>
</user>
<!-- Advanced Message Processing module configuration -->
<amp>
<!-- You can disable some actions -->
<!--
<disableactions>
<drop/>
<error/>
<alert/>
<notify/>
</disableactions>
-->
<!-- You can disable some conditions -->
<!--
<disableconditions>
<expireat/>
<matchresource/>
<deliver/>
</disableconditions>
-->
<!-- You need to enable this if your server has offline storage disabled -->
<!--
<offlinestoragedisabled/>
-->
</amp>
<!-- Offline module configuration -->
<offline>
<!-- Do not store messages in offline store -->
<!--
<dropmessages/>
-->
<!-- Store headline messages in offline store -->
<!--
<storeheadlines/>
-->
<!-- Do not store subscription requests in offline store -->
<!--
<dropsubscriptions/>
-->
<!-- Offline storage message quota.
Specifies how many messages will be stored in user offline store -->
<!--
<userquota>500</userquota>
-->
</offline>
<!-- roster module configuration -->
<roster>
<!-- maximum items per user roster -->
<!--
<maxitems>100</maxitems>
-->
</roster>
<!-- status module configuration -->
<status>
<!-- presence service resource
disabled when commented out -->
<!--
<resource>webstatus</resource>
-->
</status>
<!-- Apple: mod_deliver: For Notification server support,
If defined, the component specified will be an exception to the rules
for message sending. Messages sent from this component, with no resource specified
in the "to" attribute, will be duplicated to all sessions matching the "to" JID. -->
<!--<apple_notification_component_addr>pubsub.@HOSTNAME@</apple_notification_component_addr>-->
</sm>
<!--
vim: syntax=xml
-->