"""
MSNP8 Protocol (client only) - semi-experimental
Stability: unstable.
This module provides support for clients using the MSN Protocol (MSNP8).
There are basically 3 servers involved in any MSN session:
I{Dispatch server}
The DispatchClient class handles connections to the
dispatch server, which basically delegates users to a
suitable notification server.
You will want to subclass this and handle the gotNotificationReferral
method appropriately.
I{Notification Server}
The NotificationClient class handles connections to the
notification server, which acts as a session server
(state updates, message negotiation etc...)
I{Switcboard Server}
The SwitchboardClient handles connections to switchboard
servers which are used to conduct conversations with other users.
There are also two classes (FileSend and FileReceive) used
for file transfers.
Clients handle events in two ways.
- each client request requiring a response will return a Deferred,
the callback for same will be fired when the server sends the
required response
- Events which are not in response to any client request have
respective methods which should be overridden and handled in
an adequate manner
Most client request callbacks require more than one argument,
and since Deferreds can only pass the callback one result,
most of the time the callback argument will be a tuple of
values (documented in the respective request method).
To make reading/writing code easier, callbacks can be defined in
a number of ways to handle this 'cleanly'. One way would be to
define methods like: def callBack(self, (arg1, arg2, arg)): ...
another way would be to do something like:
d.addCallback(lambda result: myCallback(*result)).
If the server sends an error response to a client request,
the errback of the corresponding Deferred will be called,
the argument being the corresponding error code.
B{NOTE}:
Due to the lack of an official spec for MSNP8, extra checking
than may be deemed necessary often takes place considering the
server is never 'wrong'. Thus, if gotBadLine (in any of the 3
main clients) is called, or an MSNProtocolError is raised, it's
probably a good idea to submit a bug report. ;)
Use of this module requires that PyOpenSSL is installed.
TODO
====
- check message hooks with invalid x-msgsinvite messages.
- font handling
- switchboard factory
@author: U{Sam Jordan<mailto:sam@twistedmatrix.com>}
"""
from __future__ import nested_scopes
from basic import LineReceiver
from http import HTTPClient
from twisted.internet import reactor
from twisted.internet.defer import Deferred
from twisted.internet.protocol import ClientFactory
from twisted.internet.ssl import ClientContextFactory
from twisted.python import failure, log
import types, operator, os, md5
from random import randint
from urllib import quote, unquote
MSN_PROTOCOL_VERSION = "MSNP8 CVR0" MSN_PORT = 1863 MSN_MAX_MESSAGE = 1664 MSN_CHALLENGE_STR = "Q1P7W2E4J9R8U3S5" MSN_CVR_STR = "0x0409 win 4.10 i386 MSNMSGR 5.0.0544 MSMSGS"
LOGIN_SUCCESS = 1
LOGIN_FAILURE = 2
LOGIN_REDIRECT = 3
FORWARD_LIST = 1
ALLOW_LIST = 2
BLOCK_LIST = 4
REVERSE_LIST = 8
HOME_PHONE = "PHH"
WORK_PHONE = "PHW"
MOBILE_PHONE = "PHM"
HAS_PAGER = "MOB"
STATUS_ONLINE = 'NLN'
STATUS_OFFLINE = 'FLN'
STATUS_HIDDEN = 'HDN'
STATUS_IDLE = 'IDL'
STATUS_AWAY = 'AWY'
STATUS_BUSY = 'BSY'
STATUS_BRB = 'BRB'
STATUS_PHONE = 'PHN'
STATUS_LUNCH = 'LUN'
CR = "\r"
LF = "\n"
def checkParamLen(num, expected, cmd, error=None):
if error == None: error = "Invalid Number of Parameters for %s" % cmd
if num != expected: raise MSNProtocolError, error
def _parseHeader(h, v):
"""
Split a certin number of known
header values with the format:
field1=val,field2=val,field3=val into
a dict mapping fields to values.
@param h: the header's key
@param v: the header's value as a string
"""
if h in ('passporturls','authentication-info','www-authenticate'):
v = v.replace('Passport1.4','').lstrip()
fields = {}
for fieldPair in v.split(','):
try:
field,value = fieldPair.split('=',1)
fields[field.lower()] = value
except ValueError:
fields[field.lower()] = ''
return fields
else: return v
def _parsePrimitiveHost(host):
h,p = host.replace('https://','').split('/',1)
p = '/' + p
return h,p
def _login(userHandle, passwd, nexusServer, cached=0, authData=''):
"""
This function is used internally and should not ever be called
directly.
"""
cb = Deferred()
def _cb(server, auth):
loginFac = ClientFactory()
loginFac.protocol = lambda : PassportLogin(cb, userHandle, passwd, server, auth)
reactor.connectSSL(_parsePrimitiveHost(server)[0], 443, loginFac, ClientContextFactory())
if cached:
_cb(nexusServer, authData)
else:
fac = ClientFactory()
d = Deferred()
d.addCallbacks(_cb, callbackArgs=(authData,))
d.addErrback(lambda f: cb.errback(f))
fac.protocol = lambda : PassportNexus(d, nexusServer)
reactor.connectSSL(_parsePrimitiveHost(nexusServer)[0], 443, fac, ClientContextFactory())
return cb
class PassportNexus(HTTPClient):
"""
Used to obtain the URL of a valid passport
login HTTPS server.
This class is used internally and should
not be instantiated directly -- that is,
The passport logging in process is handled
transparantly by NotificationClient.
"""
def __init__(self, deferred, host):
self.deferred = deferred
self.host, self.path = _parsePrimitiveHost(host)
def connectionMade(self):
HTTPClient.connectionMade(self)
self.sendCommand('GET', self.path)
self.sendHeader('Host', self.host)
self.endHeaders()
self.headers = {}
def handleHeader(self, header, value):
h = header.lower()
self.headers[h] = _parseHeader(h, value)
def handleEndHeaders(self):
if self.connected: self.transport.loseConnection()
if not self.headers.has_key('passporturls') or not self.headers['passporturls'].has_key('dalogin'):
self.deferred.errback(failure.Failure(failure.DefaultException("Invalid Nexus Reply")))
self.deferred.callback('https://' + self.headers['passporturls']['dalogin'])
def handleResponse(self, r): pass
class PassportLogin(HTTPClient):
"""
This class is used internally to obtain
a login ticket from a passport HTTPS
server -- it should not be used directly.
"""
_finished = 0
def __init__(self, deferred, userHandle, passwd, host, authData):
self.deferred = deferred
self.userHandle = userHandle
self.passwd = passwd
self.authData = authData
self.host, self.path = _parsePrimitiveHost(host)
def connectionMade(self):
self.sendCommand('GET', self.path)
self.sendHeader('Authorization', 'Passport1.4 OrgVerb=GET,OrgURL=http://messenger.msn.com,' +
'sign-in=%s,pwd=%s,%s' % (quote(self.userHandle), self.passwd,self.authData))
self.sendHeader('Host', self.host)
self.endHeaders()
self.headers = {}
def handleHeader(self, header, value):
h = header.lower()
self.headers[h] = _parseHeader(h, value)
def handleEndHeaders(self):
if self._finished: return
self._finished = 1 if self.connected: self.transport.loseConnection()
authHeader = 'authentication-info'
_interHeader = 'www-authenticate'
if self.headers.has_key(_interHeader): authHeader = _interHeader
try:
info = self.headers[authHeader]
status = info['da-status']
handler = getattr(self, 'login_%s' % (status,), None)
if handler:
handler(info)
else: raise Exception()
except Exception, e:
self.deferred.errback(failure.Failure(e))
def handleResponse(self, r): pass
def login_success(self, info):
ticket = info['from-pp']
ticket = ticket[1:len(ticket)-1]
self.deferred.callback((LOGIN_SUCCESS, ticket))
def login_failed(self, info):
self.deferred.callback((LOGIN_FAILURE, unquote(info['cbtxt'])))
def login_redir(self, info):
self.deferred.callback((LOGIN_REDIRECT, self.headers['location'], self.authData))
class MSNProtocolError(Exception):
"""
This Exception is basically used for debugging
purposes, as the official MSN server should never
send anything _wrong_ and nobody in their right
mind would run their B{own} MSN server.
If it is raised by default command handlers
(handle_BLAH) the error will be logged.
"""
pass
class MSNMessage:
"""
I am the class used to represent an 'instant' message.
@ivar userHandle: The user handle (passport) of the sender
(this is only used when receiving a message)
@ivar screenName: The screen name of the sender (this is only used
when receiving a message)
@ivar message: The message
@ivar headers: The message headers
@type headers: dict
@ivar length: The message length (including headers and line endings)
@ivar ack: This variable is used to tell the server how to respond
once the message has been sent. If set to MESSAGE_ACK
(default) the server will respond with an ACK upon receiving
the message, if set to MESSAGE_NACK the server will respond
with a NACK upon failure to receive the message.
If set to MESSAGE_ACK_NONE the server will do nothing.
This is relevant for the return value of
SwitchboardClient.sendMessage (which will return
a Deferred if ack is set to either MESSAGE_ACK or MESSAGE_NACK
and will fire when the respective ACK or NACK is received).
If set to MESSAGE_ACK_NONE sendMessage will return None.
"""
MESSAGE_ACK = 'A'
MESSAGE_NACK = 'N'
MESSAGE_ACK_NONE = 'U'
ack = MESSAGE_ACK
def __init__(self, length=0, userHandle="", screenName="", message=""):
self.userHandle = userHandle
self.screenName = screenName
self.message = message
self.headers = {'MIME-Version' : '1.0', 'Content-Type' : 'text/plain'}
self.length = length
self.readPos = 0
def _calcMessageLen(self):
"""
used to calculte the number to send
as the message length when sending a message.
"""
return reduce(operator.add, [len(x[0]) + len(x[1]) + 4 for x in self.headers.items()]) + len(self.message) + 2
def setHeader(self, header, value):
""" set the desired header """
self.headers[header] = value
def getHeader(self, header):
"""
get the desired header value
@raise KeyError: if no such header exists.
"""
return self.headers[header]
def hasHeader(self, header):
""" check to see if the desired header exists """
return self.headers.has_key(header)
def getMessage(self):
""" return the message - not including headers """
return self.message
def setMessage(self, message):
""" set the message text """
self.message = message
class MSNContact:
"""
This class represents a contact (user).
@ivar userHandle: The contact's user handle (passport).
@ivar screenName: The contact's screen name.
@ivar groups: A list of all the group IDs which this
contact belongs to.
@ivar lists: An integer representing the sum of all lists
that this contact belongs to.
@ivar status: The contact's status code.
@type status: str if contact's status is known, None otherwise.
@ivar homePhone: The contact's home phone number.
@type homePhone: str if known, otherwise None.
@ivar workPhone: The contact's work phone number.
@type workPhone: str if known, otherwise None.
@ivar mobilePhone: The contact's mobile phone number.
@type mobilePhone: str if known, otherwise None.
@ivar hasPager: Whether or not this user has a mobile pager
(true=yes, false=no)
"""
def __init__(self, userHandle="", screenName="", lists=0, groups=[], status=None):
self.userHandle = userHandle
self.screenName = screenName
self.lists = lists
self.groups = [] self.status = status
self.homePhone = None
self.workPhone = None
self.mobilePhone = None
self.hasPager = None
def setPhone(self, phoneType, value):
"""
set phone numbers/values for this specific user.
for phoneType check the *_PHONE constants and HAS_PAGER
"""
t = phoneType.upper()
if t == HOME_PHONE: self.homePhone = value
elif t == WORK_PHONE: self.workPhone = value
elif t == MOBILE_PHONE: self.mobilePhone = value
elif t == HAS_PAGER: self.hasPager = value
else: raise ValueError, "Invalid Phone Type"
def addToList(self, listType):
"""
Update the lists attribute to
reflect being part of the
given list.
"""
self.lists |= listType
def removeFromList(self, listType):
"""
Update the lists attribute to
reflect being removed from the
given list.
"""
self.lists ^= listType
class MSNContactList:
"""
This class represents a basic MSN contact list.
@ivar contacts: All contacts on my various lists
@type contacts: dict (mapping user handles to MSNContact objects)
@ivar version: The current contact list version (used for list syncing)
@ivar groups: a mapping of group ids to group names
(groups can only exist on the forward list)
@type groups: dict
B{Note}:
This is used only for storage and doesn't effect the
server's contact list.
"""
def __init__(self):
self.contacts = {}
self.version = 0
self.groups = {}
self.autoAdd = 0
self.privacy = 0
def _getContactsFromList(self, listType):
"""
Obtain all contacts which belong
to the given list type.
"""
return dict([(uH,obj) for uH,obj in self.contacts.items() if obj.lists & listType])
def addContact(self, contact):
"""
Add a contact
"""
self.contacts[contact.userHandle] = contact
def remContact(self, userHandle):
"""
Remove a contact
"""
try:
del self.contacts[userHandle]
except KeyError: pass
def getContact(self, userHandle):
"""
Obtain the MSNContact object
associated with the given
userHandle.
@return: the MSNContact object if
the user exists, or None.
"""
try:
return self.contacts[userHandle]
except KeyError:
return None
def getBlockedContacts(self):
"""
Obtain all the contacts on my block list
"""
return self._getContactsFromList(BLOCK_LIST)
def getAuthorizedContacts(self):
"""
Obtain all the contacts on my auth list.
(These are contacts which I have verified
can view my state changes).
"""
return self._getContactsFromList(ALLOW_LIST)
def getReverseContacts(self):
"""
Get all contacts on my reverse list.
(These are contacts which have added me
to their forward list).
"""
return self._getContactsFromList(REVERSE_LIST)
def getContacts(self):
"""
Get all contacts on my forward list.
(These are the contacts which I have added
to my list).
"""
return self._getContactsFromList(FORWARD_LIST)
def setGroup(self, id, name):
"""
Keep a mapping from the given id
to the given name.
"""
self.groups[id] = name
def remGroup(self, id):
"""
Removed the stored group
mapping for the given id.
"""
try:
del self.groups[id]
except KeyError: pass
for c in self.contacts:
if id in c.groups: c.groups.remove(id)
class MSNEventBase(LineReceiver):
"""
This class provides support for handling / dispatching events and is the
base class of the three main client protocols (DispatchClient,
NotificationClient, SwitchboardClient)
"""
def __init__(self):
self.ids = {} self.currentID = 0
self.connected = 0
self.setLineMode()
self.currentMessage = None
def connectionLost(self, reason):
self.ids = {}
self.connected = 0
def connectionMade(self):
self.connected = 1
def _fireCallback(self, id, *args):
"""
Fire the callback for the given id
if one exists and return 1, else return false
"""
if self.ids.has_key(id):
self.ids[id][0].callback(args)
del self.ids[id]
return 1
return 0
def _nextTransactionID(self):
""" return a usable transaction ID """
self.currentID += 1
if self.currentID > 1000: self.currentID = 1
return self.currentID
def _createIDMapping(self, data=None):
"""
return a unique transaction ID that is mapped internally to a
deferred .. also store arbitrary data if it is needed
"""
id = self._nextTransactionID()
d = Deferred()
self.ids[id] = (d, data)
return (id, d)
def checkMessage(self, message):
"""
process received messages to check for file invitations and
typing notifications and other control type messages
"""
raise NotImplementedError
def lineReceived(self, line):
if self.currentMessage:
self.currentMessage.readPos += len(line+CR+LF)
if line == "":
self.setRawMode()
if self.currentMessage.readPos == self.currentMessage.length: self.rawDataReceived("") return
try:
header, value = line.split(':')
except ValueError:
raise MSNProtocolError, "Invalid Message Header"
self.currentMessage.setHeader(header, unquote(value).lstrip())
return
try:
cmd, params = line.split(' ', 1)
except ValueError:
raise MSNProtocolError, "Invalid Message, %s" % repr(line)
if len(cmd) != 3: raise MSNProtocolError, "Invalid Command, %s" % repr(cmd)
if cmd.isdigit():
if self.ids.has_key(params.split()[0]):
self.ids[id].errback(int(cmd))
del self.ids[id]
return
else: self.gotError(int(cmd))
return
handler = getattr(self, "handle_%s" % cmd.upper(), None)
if handler:
try: handler(params.split())
except MSNProtocolError, why: self.gotBadLine(line, why)
else:
self.handle_UNKNOWN(cmd, params.split())
def rawDataReceived(self, data):
extra = ""
self.currentMessage.readPos += len(data)
diff = self.currentMessage.readPos - self.currentMessage.length
if diff > 0:
self.currentMessage.message += data[:-diff]
extra = data[-diff:]
elif diff == 0:
self.currentMessage.message += data
else:
self.currentMessage += data
return
del self.currentMessage.readPos
m = self.currentMessage
self.currentMessage = None
self.setLineMode(extra)
if not self.checkMessage(m):
return
self.gotMessage(m)
def handle_MSG(self, params):
checkParamLen(len(params), 3, 'MSG')
try:
messageLen = int(params[2])
except ValueError: raise MSNProtocolError, "Invalid Parameter for MSG length argument"
self.currentMessage = MSNMessage(length=messageLen, userHandle=params[0], screenName=unquote(params[1]))
def handle_UNKNOWN(self, cmd, params):
""" implement me in subclasses if you want to handle unknown events """
log.msg("Received unknown command (%s), params: %s" % (cmd, params))
def gotMessage(self, message):
"""
called when we receive a message - override in notification
and switchboard clients
"""
raise NotImplementedError
def gotBadLine(self, line, why):
""" called when a handler notifies me that this line is broken """
log.msg('Error in line: %s (%s)' % (line, why))
def gotError(self, errorCode):
"""
called when the server sends an error which is not in
response to a sent command (ie. it has no matching transaction ID)
"""
log.msg('Error %s' % (errorCodes[errorCode]))
class DispatchClient(MSNEventBase):
"""
This class provides support for clients connecting to the dispatch server
@ivar userHandle: your user handle (passport) needed before connecting.
"""
userHandle = ""
def connectionMade(self):
MSNEventBase.connectionMade(self)
self.sendLine('VER %s %s' % (self._nextTransactionID(), MSN_PROTOCOL_VERSION))
def handle_VER(self, params):
versions = params[1:]
if versions is None or ' '.join(versions) != MSN_PROTOCOL_VERSION:
self.transport.loseConnection()
raise MSNProtocolError, "Invalid version response"
id = self._nextTransactionID()
self.sendLine("CVR %s %s %s" % (id, MSN_CVR_STR, self.userHandle))
def handle_CVR(self, params):
self.sendLine("USR %s TWN I %s" % (self._nextTransactionID(), self.userHandle))
def handle_XFR(self, params):
if len(params) < 4: raise MSNProtocolError, "Invalid number of parameters for XFR"
id, refType, addr = params[:3]
try:
host, port = addr.split(':')
except ValueError:
host = addr
port = MSN_PORT
if refType == "NS":
self.gotNotificationReferral(host, int(port))
def gotNotificationReferral(self, host, port):
"""
called when we get a referral to the notification server.
@param host: the notification server's hostname
@param port: the port to connect to
"""
pass
class NotificationClient(MSNEventBase):
"""
This class provides support for clients connecting
to the notification server.
"""
factory = None
def __init__(self, currentID=0):
MSNEventBase.__init__(self)
self.currentID = currentID
self._state = ['DISCONNECTED', {}]
def _setState(self, state):
self._state[0] = state
def _getState(self):
return self._state[0]
def _getStateData(self, key):
return self._state[1][key]
def _setStateData(self, key, value):
self._state[1][key] = value
def _remStateData(self, *args):
for key in args: del self._state[1][key]
def connectionMade(self):
MSNEventBase.connectionMade(self)
self._setState('CONNECTED')
self.sendLine("VER %s %s" % (self._nextTransactionID(), MSN_PROTOCOL_VERSION))
def connectionLost(self, reason):
self._setState('DISCONNECTED')
self._state[1] = {}
MSNEventBase.connectionLost(self, reason)
def checkMessage(self, message):
""" hook used for detecting specific notification messages """
cTypes = [s.lstrip() for s in message.getHeader('Content-Type').split(';')]
if 'text/x-msmsgsprofile' in cTypes:
self.gotProfile(message)
return 0
return 1
def handle_VER(self, params):
versions = params[1:]
if versions is None or ' '.join(versions) != MSN_PROTOCOL_VERSION:
self.transport.loseConnection()
raise MSNProtocolError, "Invalid version response"
self.sendLine("CVR %s %s %s" % (self._nextTransactionID(), MSN_CVR_STR, self.factory.userHandle))
def handle_CVR(self, params):
self.sendLine("USR %s TWN I %s" % (self._nextTransactionID(), self.factory.userHandle))
def handle_USR(self, params):
if len(params) != 4 and len(params) != 6:
raise MSNProtocolError, "Invalid Number of Parameters for USR"
mechanism = params[1]
if mechanism == "OK":
self.loggedIn(params[2], unquote(params[3]), int(params[4]))
elif params[2].upper() == "S":
f = self.factory
d = _login(f.userHandle, f.password, f.passportServer, authData=params[3])
d.addCallback(self._passportLogin)
d.addErrback(self._passportError)
def _passportLogin(self, result):
if result[0] == LOGIN_REDIRECT:
d = _login(self.factory.userHandle, self.factory.password,
result[1], cached=1, authData=result[2])
d.addCallback(self._passportLogin)
d.addErrback(self._passportError)
elif result[0] == LOGIN_SUCCESS:
self.sendLine("USR %s TWN S %s" % (self._nextTransactionID(), result[1]))
elif result[0] == LOGIN_FAILURE:
self.loginFailure(result[1])
def _passportError(self, failure):
self.loginFailure("Exception while authenticating: %s" % failure)
def handle_CHG(self, params):
checkParamLen(len(params), 3, 'CHG')
id = int(params[0])
if not self._fireCallback(id, params[1]):
self.statusChanged(params[1])
def handle_ILN(self, params):
checkParamLen(len(params), 5, 'ILN')
self.gotContactStatus(params[1], params[2], unquote(params[3]))
def handle_CHL(self, params):
checkParamLen(len(params), 2, 'CHL')
self.sendLine("QRY %s msmsgs@msnmsgr.com 32" % self._nextTransactionID())
self.transport.write(md5.md5(params[1] + MSN_CHALLENGE_STR).hexdigest())
def handle_QRY(self, params):
pass
def handle_NLN(self, params):
checkParamLen(len(params), 4, 'NLN')
self.contactStatusChanged(params[0], params[1], unquote(params[2]))
def handle_FLN(self, params):
checkParamLen(len(params), 1, 'FLN')
self.contactOffline(params[0])
def handle_LST(self, params):
if self._getState() != 'SYNC': return
contact = MSNContact(userHandle=params[0], screenName=unquote(params[1]),
lists=int(params[2]))
if contact.lists & FORWARD_LIST:
contact.groups.extend(map(int, params[3].split(',')))
self._getStateData('list').addContact(contact)
self._setStateData('last_contact', contact)
sofar = self._getStateData('lst_sofar') + 1
if sofar == self._getStateData('lst_reply'):
self._setState('SESSION')
contacts = self._getStateData('list')
phone = self._getStateData('phone')
id = self._getStateData('synid')
self._remStateData('lst_reply', 'lsg_reply', 'lst_sofar', 'phone', 'synid', 'list')
self._fireCallback(id, contacts, phone)
else:
self._setStateData('lst_sofar',sofar)
def handle_BLP(self, params):
if self._getState() == 'SYNC':
self._getStateData('list').privacy = listCodeToID[params[0].lower()]
else:
id = int(params[0])
self._fireCallback(id, int(params[1]), listCodeToID[params[2].lower()])
def handle_GTC(self, params):
if self._getState() == 'SYNC':
if params[0].lower() == "a": self._getStateData('list').autoAdd = 0
elif params[0].lower() == "n": self._getStateData('list').autoAdd = 1
else: raise MSNProtocolError, "Invalid Paramater for GTC" else:
id = int(params[0])
if params[1].lower() == "a": self._fireCallback(id, 0)
elif params[1].lower() == "n": self._fireCallback(id, 1)
else: raise MSNProtocolError, "Invalid Paramater for GTC"
def handle_SYN(self, params):
id = int(params[0])
if len(params) == 2:
self._setState('SESSION')
self._fireCallback(id, None, None)
else:
contacts = MSNContactList()
contacts.version = int(params[1])
self._setStateData('list', contacts)
self._setStateData('lst_reply', int(params[2]))
self._setStateData('lsg_reply', int(params[3]))
self._setStateData('lst_sofar', 0)
self._setStateData('phone', [])
def handle_LSG(self, params):
if self._getState() == 'SYNC':
self._getStateData('list').groups[int(params[0])] = unquote(params[1])
def handle_PRP(self, params):
if self._getState() == 'SYNC':
self._getStateData('phone').append((params[0], unquote(params[1])))
else:
self._fireCallback(int(params[0]), int(params[1]), unquote(params[3]))
def handle_BPR(self, params):
numParams = len(params)
if numParams == 2: self._getStateData('last_contact').setPhone(params[0], unquote(params[1]))
elif numParams == 4:
self.gotPhoneNumber(int(params[0]), params[1], params[2], unquote(params[3]))
def handle_ADG(self, params):
checkParamLen(len(params), 5, 'ADG')
id = int(params[0])
if not self._fireCallback(id, int(params[1]), unquote(params[2]), int(params[3])):
raise MSNProtocolError, "ADG response does not match up to a request"
def handle_RMG(self, params):
checkParamLen(len(params), 3, 'RMG')
id = int(params[0])
if not self._fireCallback(id, int(params[1]), int(params[2])):
raise MSNProtocolError, "RMG response does not match up to a request"
def handle_REG(self, params):
checkParamLen(len(params), 5, 'REG')
id = int(params[0])
if not self._fireCallback(id, int(params[1]), int(params[2]), unquote(params[3])):
raise MSNProtocolError, "REG response does not match up to a request"
def handle_ADD(self, params):
numParams = len(params)
if numParams < 5 or params[1].upper() not in ('AL','BL','RL','FL'):
raise MSNProtocolError, "Invalid Paramaters for ADD" id = int(params[0])
listType = params[1].lower()
listVer = int(params[2])
userHandle = params[3]
groupID = None
if numParams == 6: if params[1].upper() != "FL": raise MSNProtocolError, "Only forward list can contain groups" groupID = int(params[5])
if not self._fireCallback(id, listCodeToID[listType], userHandle, listVer, groupID):
self.userAddedMe(userHandle, unquote(params[4]), listVer)
def handle_REM(self, params):
numParams = len(params)
if numParams < 4 or params[1].upper() not in ('AL','BL','FL','RL'):
raise MSNProtocolError, "Invalid Paramaters for REM" id = int(params[0])
listType = params[1].lower()
listVer = int(params[2])
userHandle = params[3]
groupID = None
if numParams == 5:
if params[1] != "FL": raise MSNProtocolError, "Only forward list can contain groups" groupID = int(params[4])
if not self._fireCallback(id, listCodeToID[listType], userHandle, listVer, groupID):
if listType.upper() == "RL": self.userRemovedMe(userHandle, listVer)
def handle_REA(self, params):
checkParamLen(len(params), 4, 'REA')
id = int(params[0])
self._fireCallback(id, int(params[1]), unquote(params[3]))
def handle_XFR(self, params):
checkParamLen(len(params), 5, 'XFR')
id = int(params[0])
try:
host, port = params[2].split(':')
except ValueError:
host = params[2]
port = MSN_PORT
if not self._fireCallback(id, host, int(port), params[4]):
raise MSNProtocolError, "Got XFR (referral) that I didn't ask for .. should this happen?"
def handle_RNG(self, params):
checkParamLen(len(params), 6, 'RNG')
try:
host, port = params[1].split(":")
port = int(port)
except ValueError:
host = params[1]
port = MSN_PORT
self.gotSwitchboardInvitation(int(params[0]), host, port, params[3], params[4],
unquote(params[5]))
def handle_OUT(self, params):
checkParamLen(len(params), 1, 'OUT')
if params[0] == "OTH": self.multipleLogin()
elif params[0] == "SSD": self.serverGoingDown()
else: raise MSNProtocolError, "Invalid Parameters received for OUT"
def loggedIn(self, userHandle, screenName, verified):
"""
Called when the client has logged in.
The default behaviour of this method is to
update the factory with our screenName and
to sync the contact list (factory.contacts).
When this is complete self.listSynchronized
will be called.
@param userHandle: our userHandle
@param screenName: our screenName
@param verified: 1 if our passport has been (verified), 0 if not.
(i'm not sure of the significace of this)
@type verified: int
"""
self.factory.screenName = screenName
if not self.factory.contacts: listVersion = 0
else: listVersion = self.factory.contacts.version
self.syncList(listVersion).addCallback(self.listSynchronized)
def loginFailure(self, message):
"""
Called when the client fails to login.
@param message: a message indicating the problem that was encountered
"""
pass
def gotProfile(self, message):
"""
Called after logging in when the server sends an initial
message with MSN/passport specific profile information
such as country, number of kids, etc.
Check the message headers for the specific values.
@param message: The profile message
"""
pass
def listSynchronized(self, *args):
"""
Lists are now synchronized by default upon logging in, this
method is called after the synchronization has finished
and the factory now has the up-to-date contacts.
"""
pass
def statusChanged(self, statusCode):
"""
Called when our status changes and it isn't in response to
a client command. By default we will update the status
attribute of the factory.
@param statusCode: 3-letter status code
"""
self.factory.status = statusCode
def gotContactStatus(self, statusCode, userHandle, screenName):
"""
Called after loggin in when the server sends status of online contacts.
By default we will update the status attribute of the contact stored
on the factory.
@param statusCode: 3-letter status code
@param userHandle: the contact's user handle (passport)
@param screenName: the contact's screen name
"""
self.factory.contacts.getContact(userHandle).status = statusCode
def contactStatusChanged(self, statusCode, userHandle, screenName):
"""
Called when we're notified that a contact's status has changed.
By default we will update the status attribute of the contact
stored on the factory.
@param statusCode: 3-letter status code
@param userHandle: the contact's user handle (passport)
@param screenName: the contact's screen name
"""
self.factory.contacts.getContact(userHandle).status = statusCode
def contactOffline(self, userHandle):
"""
Called when a contact goes offline. By default this method
will update the status attribute of the contact stored
on the factory.
@param userHandle: the contact's user handle
"""
self.factory.contacts.getContact(userHandle).status = STATUS_OFFLINE
def gotPhoneNumber(self, listVersion, userHandle, phoneType, number):
"""
Called when the server sends us phone details about
a specific user (for example after a user is added
the server will send their status, phone details etc.
By default we will update the list version for the
factory's contact list and update the phone details
for the specific user.
@param listVersion: the new list version
@param userHandle: the contact's user handle (passport)
@param phoneType: the specific phoneType
(*_PHONE constants or HAS_PAGER)
@param number: the value/phone number.
"""
self.factory.contacts.version = listVersion
self.factory.contacts.getContact(userHandle).setPhone(phoneType, number)
def userAddedMe(self, userHandle, screenName, listVersion):
"""
Called when a user adds me to their list. (ie. they have been added to
the reverse list. By default this method will update the version of
the factory's contact list -- that is, if the contact already exists
it will update the associated lists attribute, otherwise it will create
a new MSNContact object and store it.
@param userHandle: the userHandle of the user
@param screenName: the screen name of the user
@param listVersion: the new list version
@type listVersion: int
"""
self.factory.contacts.version = listVersion
c = self.factory.contacts.getContact(userHandle)
if not c:
c = MSNContact(userHandle=userHandle, screenName=screenName)
self.factory.contacts.addContact(c)
c.addToList(REVERSE_LIST)
def userRemovedMe(self, userHandle, listVersion):
"""
Called when a user removes us from their contact list
(they are no longer on our reverseContacts list.
By default this method will update the version of
the factory's contact list -- that is, the user will
be removed from the reverse list and if they are no longer
part of any lists they will be removed from the contact
list entirely.
@param userHandle: the contact's user handle (passport)
@param listVersion: the new list version
"""
self.factory.contacts.version = listVersion
c = self.factory.contacts.getContact(userHandle)
c.removeFromList(REVERSE_LIST)
if c.lists == 0: self.factory.contacts.remContact(c.userHandle)
def gotSwitchboardInvitation(self, sessionID, host, port,
key, userHandle, screenName):
"""
Called when we get an invitation to a switchboard server.
This happens when a user requests a chat session with us.
@param sessionID: session ID number, must be remembered for logging in
@param host: the hostname of the switchboard server
@param port: the port to connect to
@param key: used for authorization when connecting
@param userHandle: the user handle of the person who invited us
@param screenName: the screen name of the person who invited us
"""
pass
def multipleLogin(self):
"""
Called when the server says there has been another login
under our account, the server should disconnect us right away.
"""
pass
def serverGoingDown(self):
"""
Called when the server has notified us that it is going down for
maintenance.
"""
pass
def changeStatus(self, status):
"""
Change my current status. This method will add
a default callback to the returned Deferred
which will update the status attribute of the
factory.
@param status: 3-letter status code (as defined by
the STATUS_* constants)
@return: A Deferred, the callback of which will be
fired when the server confirms the change
of status. The callback argument will be
a tuple with the new status code as the
only element.
"""
id, d = self._createIDMapping()
self.sendLine("CHG %s %s" % (id, status))
def _cb(r):
self.factory.status = r[0]
return r
return d.addCallback(_cb)
def setPrivacyMode(self, privLevel):
"""
Set my privacy mode on the server.
B{Note}:
This only keeps the current privacy setting on
the server for later retrieval, it does not
effect the way the server works at all.
@param privLevel: This parameter can be true, in which
case the server will keep the state as
'al' which the official client interprets
as -> allow messages from only users on
the allow list. Alternatively it can be
false, in which case the server will keep
the state as 'bl' which the official client
interprets as -> allow messages from all
users except those on the block list.
@return: A Deferred, the callback of which will be fired when
the server replies with the new privacy setting.
The callback argument will be a tuple, the 2 elements
of which being the list version and either 'al'
or 'bl' (the new privacy setting).
"""
id, d = self._createIDMapping()
if privLevel: self.sendLine("BLP %s AL" % id)
else: self.sendLine("BLP %s BL" % id)
return d
def syncList(self, version):
"""
Used for keeping an up-to-date contact list.
A callback is added to the returned Deferred
that updates the contact list on the factory
and also sets my state to STATUS_ONLINE.
B{Note}:
This is called automatically upon signing
in using the version attribute of
factory.contacts, so you may want to persist
this object accordingly. Because of this there
is no real need to ever call this method
directly.
@param version: The current known list version
@return: A Deferred, the callback of which will be
fired when the server sends an adequate reply.
The callback argument will be a tuple with two
elements, the new list (MSNContactList) and
your current state (a dictionary). If the version
you sent _was_ the latest list version, both elements
will be None. To just request the list send a version of 0.
"""
self._setState('SYNC')
id, d = self._createIDMapping(data=str(version))
self._setStateData('synid',id)
self.sendLine("SYN %s %s" % (id, version))
def _cb(r):
self.changeStatus(STATUS_ONLINE)
if r[0] is not None:
self.factory.contacts = r[0]
return r
return d.addCallback(_cb)
def setPhoneDetails(self, phoneType, value):
"""
Set/change my phone numbers stored on the server.
@param phoneType: phoneType can be one of the following
constants - HOME_PHONE, WORK_PHONE,
MOBILE_PHONE, HAS_PAGER.
These are pretty self-explanatory, except
maybe HAS_PAGER which refers to whether or
not you have a pager.
@param value: for all of the *_PHONE constants the value is a
phone number (str), for HAS_PAGER accepted values
are 'Y' (for yes) and 'N' (for no).
@return: A Deferred, the callback for which will be fired when
the server confirms the change has been made. The
callback argument will be a tuple with 2 elements, the
first being the new list version (int) and the second
being the new phone number value (str).
"""
id, d = self._createIDMapping()
self.sendLine("PRP %s %s %s" % (id, phoneType, quote(value)))
return d
def addListGroup(self, name):
"""
Used to create a new list group.
A default callback is added to the
returned Deferred which updates the
contacts attribute of the factory.
@param name: The desired name of the new group.
@return: A Deferred, the callbacck for which will be called
when the server clarifies that the new group has been
created. The callback argument will be a tuple with 3
elements: the new list version (int), the new group name
(str) and the new group ID (int).
"""
id, d = self._createIDMapping()
self.sendLine("ADG %s %s 0" % (id, quote(name)))
def _cb(r):
self.factory.contacts.version = r[0]
self.factory.contacts.setGroup(r[1], r[2])
return r
return d.addCallback(_cb)
def remListGroup(self, groupID):
"""
Used to remove a list group.
A default callback is added to the
returned Deferred which updates the
contacts attribute of the factory.
@param groupID: the ID of the desired group to be removed.
@return: A Deferred, the callback for which will be called when
the server clarifies the deletion of the group.
The callback argument will be a tuple with 2 elements:
the new list version (int) and the group ID (int) of
the removed group.
"""
id, d = self._createIDMapping()
self.sendLine("RMG %s %s" % (id, groupID))
def _cb(r):
self.factory.contacts.version = r[0]
self.factory.contacts.remGroup(r[1])
return r
return d.addCallback(_cb)
def renameListGroup(self, groupID, newName):
"""
Used to rename an existing list group.
A default callback is added to the returned
Deferred which updates the contacts attribute
of the factory.
@param groupID: the ID of the desired group to rename.
@param newName: the desired new name for the group.
@return: A Deferred, the callback for which will be called
when the server clarifies the renaming.
The callback argument will be a tuple of 3 elements,
the new list version (int), the group id (int) and
the new group name (str).
"""
id, d = self._createIDMapping()
self.sendLine("REG %s %s %s 0" % (id, groupID, quote(newName)))
def _cb(r):
self.factory.contacts.version = r[0]
self.factory.contacts.setGroup(r[1], r[2])
return r
return d.addCallback(_cb)
def addContact(self, listType, userHandle, groupID=0):
"""
Used to add a contact to the desired list.
A default callback is added to the returned
Deferred which updates the contacts attribute of
the factory with the new contact information.
If you are adding a contact to the forward list
and you want to associate this contact with multiple
groups then you will need to call this method for each
group you would like to add them to, changing the groupID
parameter. The default callback will take care of updating
the group information on the factory's contact list.
@param listType: (as defined by the *_LIST constants)
@param userHandle: the user handle (passport) of the contact
that is being added
@param groupID: the group ID for which to associate this contact
with. (default 0 - default group). Groups are only
valid for FORWARD_LIST.
@return: A Deferred, the callback for which will be called when
the server has clarified that the user has been added.
The callback argument will be a tuple with 4 elements:
the list type, the contact's user handle, the new list
version, and the group id (if relevant, otherwise it
will be None)
"""
id, d = self._createIDMapping()
listType = listIDToCode[listType].upper()
if listType == "FL":
self.sendLine("ADD %s FL %s %s %s" % (id, userHandle, userHandle, groupID))
else:
self.sendLine("ADD %s %s %s %s" % (id, listType, userHandle, userHandle))
def _cb(r):
self.factory.contacts.version = r[2]
c = self.factory.contacts.getContact(r[1])
if not c:
c = MSNContact(userHandle=r[1])
if r[3]: c.groups.append(r[3])
c.addToList(r[0])
return r
return d.addCallback(_cb)
def remContact(self, listType, userHandle, groupID=0):
"""
Used to remove a contact from the desired list.
A default callback is added to the returned deferred
which updates the contacts attribute of the factory
to reflect the new contact information. If you are
removing from the forward list then you will need to
supply a groupID, if the contact is in more than one
group then they will only be removed from this group
and not the entire forward list, but if this is their
only group they will be removed from the whole list.
@param listType: (as defined by the *_LIST constants)
@param userHandle: the user handle (passport) of the
contact being removed
@param groupID: the ID of the group to which this contact
belongs (only relevant for FORWARD_LIST,
default is 0)
@return: A Deferred, the callback for which will be called when
the server has clarified that the user has been removed.
The callback argument will be a tuple of 4 elements:
the list type, the contact's user handle, the new list
version, and the group id (if relevant, otherwise it will
be None)
"""
id, d = self._createIDMapping()
listType = listIDToCode[listType].upper()
if listType == "FL":
self.sendLine("REM %s FL %s %s" % (id, userHandle, groupID))
else:
self.sendLine("REM %s %s %s" % (id, listType, userHandle))
def _cb(r):
l = self.factory.contacts
l.version = r[2]
c = l.getContact(r[1])
group = r[3]
shouldRemove = 1
if group: c.groups.remove(group)
if c.groups: shouldRemove = 0
if shouldRemove:
c.removeFromList(r[0])
if c.lists == 0: l.remContact(c.userHandle)
return r
return d.addCallback(_cb)
def changeScreenName(self, newName):
"""
Used to change your current screen name.
A default callback is added to the returned
Deferred which updates the screenName attribute
of the factory and also updates the contact list
version.
@param newName: the new screen name
@return: A Deferred, the callback for which will be called
when the server sends an adequate reply.
The callback argument will be a tuple of 2 elements:
the new list version and the new screen name.
"""
id, d = self._createIDMapping()
self.sendLine("REA %s %s %s" % (id, self.factory.userHandle, quote(newName)))
def _cb(r):
self.factory.contacts.version = r[0]
self.factory.screenName = r[1]
return r
return d.addCallback(_cb)
def requestSwitchboardServer(self):
"""
Used to request a switchboard server to use for conversations.
@return: A Deferred, the callback for which will be called when
the server responds with the switchboard information.
The callback argument will be a tuple with 3 elements:
the host of the switchboard server, the port and a key
used for logging in.
"""
id, d = self._createIDMapping()
self.sendLine("XFR %s SB" % id)
return d
def logOut(self):
"""
Used to log out of the notification server.
After running the method the server is expected
to close the connection.
"""
self.sendLine("OUT")
class NotificationFactory(ClientFactory):
"""
Factory for the NotificationClient protocol.
This is basically responsible for keeping
the state of the client and thus should be used
in a 1:1 situation with clients.
@ivar contacts: An MSNContactList instance reflecting
the current contact list -- this is
generally kept up to date by the default
command handlers.
@ivar userHandle: The client's userHandle, this is expected
to be set by the client and is used by the
protocol (for logging in etc).
@ivar screenName: The client's current screen-name -- this is
generally kept up to date by the default
command handlers.
@ivar password: The client's password -- this is (obviously)
expected to be set by the client.
@ivar passportServer: This must point to an msn passport server
(the whole URL is required)
@ivar status: The status of the client -- this is generally kept
up to date by the default command handlers
"""
contacts = None
userHandle = ''
screenName = ''
password = ''
passportServer = 'https://nexus.passport.com/rdr/pprdr.asp'
status = 'FLN'
protocol = NotificationClient
class SwitchboardClient(MSNEventBase):
"""
This class provides support for clients connecting to a switchboard server.
Switchboard servers are used for conversations with other people
on the MSN network. This means that the number of conversations at
any given time will be directly proportional to the number of
connections to varioius switchboard servers.
MSN makes no distinction between single and group conversations,
so any number of users may be invited to join a specific conversation
taking place on a switchboard server.
@ivar key: authorization key, obtained when receiving
invitation / requesting switchboard server.
@ivar userHandle: your user handle (passport)
@ivar sessionID: unique session ID, used if you are replying
to a switchboard invitation
@ivar reply: set this to 1 in connectionMade or before to signifiy
that you are replying to a switchboard invitation.
"""
key = 0
userHandle = ""
sessionID = ""
reply = 0
_iCookie = 0
def __init__(self):
MSNEventBase.__init__(self)
self.pendingUsers = {}
self.cookies = {'iCookies' : {}, 'external' : {}}
def connectionMade(self):
MSNEventBase.connectionMade(self)
print 'sending initial stuff'
self._sendInit()
def connectionLost(self, reason):
self.cookies['iCookies'] = {}
self.cookies['external'] = {}
MSNEventBase.connectionLost(self, reason)
def _sendInit(self):
"""
send initial data based on whether we are replying to an invitation
or starting one.
"""
id = self._nextTransactionID()
if not self.reply:
self.sendLine("USR %s %s %s" % (id, self.userHandle, self.key))
else:
self.sendLine("ANS %s %s %s %s" % (id, self.userHandle, self.key, self.sessionID))
def _newInvitationCookie(self):
self._iCookie += 1
if self._iCookie > 1000: self._iCookie = 1
return self._iCookie
def _checkTyping(self, message, cTypes):
""" helper method for checkMessage """
if 'text/x-msmsgscontrol' in cTypes and message.hasHeader('TypingUser'):
self.userTyping(message)
return 1
def _checkFileInvitation(self, message, info):
""" helper method for checkMessage """
if not info.get('Application-Name', '').lower() == 'file transfer': return 0
try:
cookie = int(info['Invitation-Cookie'])
fileName = info['Application-File']
fileSize = int(info['Application-FileSize'])
except KeyError:
log.msg('Received munged file transfer request ... ignoring.')
return 0
self.gotSendRequest(fileName, fileSize, cookie, message)
return 1
def _checkFileResponse(self, message, info):
""" helper method for checkMessage """
try:
cmd = info['Invitation-Command'].upper()
cookie = int(info['Invitation-Cookie'])
except KeyError: return 0
accept = (cmd == 'ACCEPT') and 1 or 0
requested = self.cookies['iCookies'].get(cookie)
if not requested: return 1
requested[0].callback((accept, cookie, info))
del self.cookies['iCookies'][cookie]
return 1
def _checkFileInfo(self, message, info):
""" helper method for checkMessage """
try:
ip = info['IP-Address']
iCookie = int(info['Invitation-Cookie'])
aCookie = int(info['AuthCookie'])
cmd = info['Invitation-Command'].upper()
port = int(info['Port'])
except KeyError: return 0
accept = (cmd == 'ACCEPT') and 1 or 0
requested = self.cookies['external'].get(iCookie)
if not requested: return 1 requested[0].callback((accept, ip, port, aCookie, info))
del self.cookies['external'][iCookie]
return 1
def checkMessage(self, message):
"""
hook for detecting any notification type messages
(e.g. file transfer)
"""
cTypes = [s.lstrip() for s in message.getHeader('Content-Type').split(';')]
if self._checkTyping(message, cTypes): return 0
if 'text/x-msmsgsinvite' in cTypes:
info = {}
for line in message.message.split('\r\n'):
try:
key, val = line.split(':')
info[key] = val.lstrip()
except ValueError: continue
if self._checkFileInvitation(message, info) or self._checkFileInfo(message, info) or self._checkFileResponse(message, info): return 0
return 1
def handle_USR(self, params):
checkParamLen(len(params), 4, 'USR')
if params[1] == "OK":
self.loggedIn()
def handle_CAL(self, params):
checkParamLen(len(params), 3, 'CAL')
id = int(params[0])
if params[1].upper() == "RINGING":
self._fireCallback(id, int(params[2]))
def handle_JOI(self, params):
checkParamLen(len(params), 2, 'JOI')
self.userJoined(params[0], unquote(params[1]))
def handle_IRO(self, params):
checkParamLen(len(params), 5, 'IRO')
self.pendingUsers[params[3]] = unquote(params[4])
if params[1] == params[2]:
self.gotChattingUsers(self.pendingUsers)
self.pendingUsers = {}
def handle_ANS(self, params):
checkParamLen(len(params), 2, 'ANS')
if params[1] == "OK":
self.loggedIn()
def handle_ACK(self, params):
checkParamLen(len(params), 1, 'ACK')
self._fireCallback(int(params[0]), None)
def handle_NAK(self, params):
checkParamLen(len(params), 1, 'NAK')
self._fireCallback(int(params[0]), None)
def handle_BYE(self, params):
self.userLeft(params[0])
def loggedIn(self):
"""
called when all login details have been negotiated.
Messages can now be sent, or new users invited.
"""
pass
def gotChattingUsers(self, users):
"""
called after connecting to an existing chat session.
@param users: A dict mapping user handles to screen names
(current users taking part in the conversation)
"""
pass
def userJoined(self, userHandle, screenName):
"""
called when a user has joined the conversation.
@param userHandle: the user handle (passport) of the user
@param screenName: the screen name of the user
"""
pass
def userLeft(self, userHandle):
"""
called when a user has left the conversation.
@param userHandle: the user handle (passport) of the user.
"""
pass
def gotMessage(self, message):
"""
called when we receive a message.
@param message: the associated MSNMessage object
"""
pass
def userTyping(self, message):
"""
called when we receive the special type of message notifying
us that a user is typing a message.
@param message: the associated MSNMessage object
"""
pass
def gotSendRequest(self, fileName, fileSize, iCookie, message):
"""
called when a contact is trying to send us a file.
To accept or reject this transfer see the
fileInvitationReply method.
@param fileName: the name of the file
@param fileSize: the size of the file
@param iCookie: the invitation cookie, used so the client can
match up your reply with this request.
@param message: the MSNMessage object which brought about this
invitation (it may contain more information)
"""
pass
def inviteUser(self, userHandle):
"""
used to invite a user to the current switchboard server.
@param userHandle: the user handle (passport) of the desired user.
@return: A Deferred, the callback for which will be called
when the server notifies us that the user has indeed
been invited. The callback argument will be a tuple
with 1 element, the sessionID given to the invited user.
I'm not sure if this is useful or not.
"""
id, d = self._createIDMapping()
self.sendLine("CAL %s %s" % (id, userHandle))
return d
def sendMessage(self, message):
"""
used to send a message.
@param message: the corresponding MSNMessage object.
@return: Depending on the value of message.ack.
If set to MSNMessage.MESSAGE_ACK or
MSNMessage.MESSAGE_NACK a Deferred will be returned,
the callback for which will be fired when an ACK or
NACK is received - the callback argument will be
(None,). If set to MSNMessage.MESSAGE_ACK_NONE then
the return value is None.
"""
if message.ack not in ('A','N'): id, d = self._nextTransactionID(), None
else: id, d = self._createIDMapping()
if message.length == 0: message.length = message._calcMessageLen()
self.sendLine("MSG %s %s %s" % (id, message.ack, message.length))
self.sendLine('MIME-Version: %s' % message.getHeader('MIME-Version'))
self.sendLine('Content-Type: %s' % message.getHeader('Content-Type'))
for header in [h for h in message.headers.items() if h[0].lower() not in ('mime-version','content-type')]:
self.sendLine("%s: %s" % (header[0], header[1]))
self.transport.write(CR+LF)
self.transport.write(message.message)
return d
def sendTypingNotification(self):
"""
used to send a typing notification. Upon receiving this
message the official client will display a 'user is typing'
message to all other users in the chat session for 10 seconds.
The official client sends one of these every 5 seconds (I think)
as long as you continue to type.
"""
m = MSNMessage()
m.ack = m.MESSAGE_ACK_NONE
m.setHeader('Content-Type', 'text/x-msmsgscontrol')
m.setHeader('TypingUser', self.userHandle)
m.message = "\r\n"
self.sendMessage(m)
def sendFileInvitation(self, fileName, fileSize):
"""
send an notification that we want to send a file.
@param fileName: the file name
@param fileSize: the file size
@return: A Deferred, the callback of which will be fired
when the user responds to this invitation with an
appropriate message. The callback argument will be
a tuple with 3 elements, the first being 1 or 0
depending on whether they accepted the transfer
(1=yes, 0=no), the second being an invitation cookie
to identify your follow-up responses and the third being
the message 'info' which is a dict of information they
sent in their reply (this doesn't really need to be used).
If you wish to proceed with the transfer see the
sendTransferInfo method.
"""
cookie = self._newInvitationCookie()
d = Deferred()
m = MSNMessage()
m.setHeader('Content-Type', 'text/x-msmsgsinvite; charset=UTF-8')
m.message += 'Application-Name: File Transfer\r\n'
m.message += 'Application-GUID: {5D3E02AB-6190-11d3-BBBB-00C04F795683}\r\n'
m.message += 'Invitation-Command: INVITE\r\n'
m.message += 'Invitation-Cookie: %s\r\n' % str(cookie)
m.message += 'Application-File: %s\r\n' % fileName
m.message += 'Application-FileSize: %s\r\n\r\n' % str(fileSize)
m.ack = m.MESSAGE_ACK_NONE
self.sendMessage(m)
self.cookies['iCookies'][cookie] = (d, m)
return d
def fileInvitationReply(self, iCookie, accept=1):
"""
used to reply to a file transfer invitation.
@param iCookie: the invitation cookie of the initial invitation
@param accept: whether or not you accept this transfer,
1 = yes, 0 = no, default = 1.
@return: A Deferred, the callback for which will be fired when
the user responds with the transfer information.
The callback argument will be a tuple with 5 elements,
whether or not they wish to proceed with the transfer
(1=yes, 0=no), their ip, the port, the authentication
cookie (see FileReceive/FileSend) and the message
info (dict) (in case they send extra header-like info
like Internal-IP, this doesn't necessarily need to be
used). If you wish to proceed with the transfer see
FileReceive.
"""
d = Deferred()
m = MSNMessage()
m.setHeader('Content-Type', 'text/x-msmsgsinvite; charset=UTF-8')
m.message += 'Invitation-Command: %s\r\n' % (accept and 'ACCEPT' or 'CANCEL')
m.message += 'Invitation-Cookie: %s\r\n' % str(iCookie)
if not accept: m.message += 'Cancel-Code: REJECT\r\n'
m.message += 'Launch-Application: FALSE\r\n'
m.message += 'Request-Data: IP-Address:\r\n'
m.message += '\r\n'
m.ack = m.MESSAGE_ACK_NONE
self.sendMessage(m)
self.cookies['external'][iCookie] = (d, m)
return d
def sendTransferInfo(self, accept, iCookie, authCookie, ip, port):
"""
send information relating to a file transfer session.
@param accept: whether or not to go ahead with the transfer
(1=yes, 0=no)
@param iCookie: the invitation cookie of previous replies
relating to this transfer
@param authCookie: the authentication cookie obtained from
an FileSend instance
@param ip: your ip
@param port: the port on which an FileSend protocol is listening.
"""
m = MSNMessage()
m.setHeader('Content-Type', 'text/x-msmsgsinvite; charset=UTF-8')
m.message += 'Invitation-Command: %s\r\n' % (accept and 'ACCEPT' or 'CANCEL')
m.message += 'Invitation-Cookie: %s\r\n' % iCookie
m.message += 'IP-Address: %s\r\n' % ip
m.message += 'Port: %s\r\n' % port
m.message += 'AuthCookie: %s\r\n' % authCookie
m.message += '\r\n'
m.ack = m.MESSAGE_NACK
self.sendMessage(m)
class FileReceive(LineReceiver):
"""
This class provides support for receiving files from contacts.
@ivar fileSize: the size of the receiving file. (you will have to set this)
@ivar connected: true if a connection has been established.
@ivar completed: true if the transfer is complete.
@ivar bytesReceived: number of bytes (of the file) received.
This does not include header data.
"""
def __init__(self, auth, myUserHandle, file, directory="", overwrite=0):
"""
@param auth: auth string received in the file invitation.
@param myUserHandle: your userhandle.
@param file: A string or file object represnting the file
to save data to.
@param directory: optional parameter specifiying the directory.
Defaults to the current directory.
@param overwrite: if true and a file of the same name exists on
your system, it will be overwritten. (0 by default)
"""
self.auth = auth
self.myUserHandle = myUserHandle
self.fileSize = 0
self.connected = 0
self.completed = 0
self.directory = directory
self.bytesReceived = 0
self.overwrite = overwrite
self.state = 'CONNECTING'
self.segmentLength = 0
self.buffer = ''
if isinstance(file, types.StringType):
path = os.path.join(directory, file)
if os.path.exists(path) and not self.overwrite:
log.msg('File already exists...')
raise IOError, "File Exists" self.file = open(os.path.join(directory, file), 'wb')
else:
self.file = file
def connectionMade(self):
self.connected = 1
self.state = 'INHEADER'
self.sendLine('VER MSNFTP')
def connectionLost(self, reason):
self.connected = 0
self.file.close()
def parseHeader(self, header):
""" parse the header of each 'message' to obtain the segment length """
if ord(header[0]) != 0: self.transport.loseConnection()
return
try:
extra, factor = header[1:]
except ValueError:
self.transport.loseConnection()
raise
extra = ord(extra)
factor = ord(factor)
return factor * 256 + extra
def lineReceived(self, line):
temp = line.split()
if len(temp) == 1: params = []
else: params = temp[1:]
cmd = temp[0]
handler = getattr(self, "handle_%s" % cmd.upper(), None)
if handler: handler(params) else: self.handle_UNKNOWN(cmd, params)
def rawDataReceived(self, data):
bufferLen = len(self.buffer)
if self.state == 'INHEADER':
delim = 3-bufferLen
self.buffer += data[:delim]
if len(self.buffer) == 3:
self.segmentLength = self.parseHeader(self.buffer)
if not self.segmentLength: return self.buffer = ""
self.state = 'INSEGMENT'
extra = data[delim:]
if len(extra) > 0: self.rawDataReceived(extra)
return
elif self.state == 'INSEGMENT':
dataSeg = data[:(self.segmentLength-bufferLen)]
self.buffer += dataSeg
self.bytesReceived += len(dataSeg)
if len(self.buffer) == self.segmentLength:
self.gotSegment(self.buffer)
self.buffer = ""
if self.bytesReceived == self.fileSize:
self.completed = 1
self.buffer = ""
self.file.close()
self.sendLine("BYE 16777989")
return
self.state = 'INHEADER'
extra = data[(self.segmentLength-bufferLen):]
if len(extra) > 0: self.rawDataReceived(extra)
return
def handle_VER(self, params):
checkParamLen(len(params), 1, 'VER')
if params[0].upper() == "MSNFTP":
self.sendLine("USR %s %s" % (self.myUserHandle, self.auth))
else:
log.msg('they sent the wrong version, time to quit this transfer')
self.transport.loseConnection()
def handle_FIL(self, params):
checkParamLen(len(params), 1, 'FIL')
try:
self.fileSize = int(params[0])
except ValueError: self.transport.loseConnection()
return
self.setRawMode()
self.sendLine("TFR")
def handle_UNKNOWN(self, cmd, params):
log.msg('received unknown command (%s), params: %s' % (cmd, params))
def gotSegment(self, data):
""" called when a segment (block) of data arrives. """
self.file.write(data)
class FileSend(LineReceiver):
"""
This class provides support for sending files to other contacts.
@ivar bytesSent: the number of bytes that have currently been sent.
@ivar completed: true if the send has completed.
@ivar connected: true if a connection has been established.
@ivar targetUser: the target user (contact).
@ivar segmentSize: the segment (block) size.
@ivar auth: the auth cookie (number) to use when sending the
transfer invitation
"""
def __init__(self, file):
"""
@param file: A string or file object represnting the file to send.
"""
if isinstance(file, types.StringType):
self.file = open(file, 'rb')
else:
self.file = file
self.fileSize = 0
self.bytesSent = 0
self.completed = 0
self.connected = 0
self.targetUser = None
self.segmentSize = 2045
self.auth = randint(0, 2**30)
self._pendingSend = None
def connectionMade(self):
self.connected = 1
def connectionLost(self, reason):
if self._pendingSend:
self._pendingSend.cancel()
self._pendingSend = None
self.connected = 0
self.file.close()
def lineReceived(self, line):
temp = line.split()
if len(temp) == 1: params = []
else: params = temp[1:]
cmd = temp[0]
handler = getattr(self, "handle_%s" % cmd.upper(), None)
if handler: handler(params)
else: self.handle_UNKNOWN(cmd, params)
def handle_VER(self, params):
checkParamLen(len(params), 1, 'VER')
if params[0].upper() == "MSNFTP":
self.sendLine("VER MSNFTP")
else: self.transport.loseConnection()
def handle_USR(self, params):
checkParamLen(len(params), 2, 'USR')
self.targetUser = params[0]
if self.auth == int(params[1]):
self.sendLine("FIL %s" % (self.fileSize))
else: self.transport.loseConnection()
def handle_TFR(self, params):
checkParamLen(len(params), 0, 'TFR')
self.sendPart()
def handle_BYE(self, params):
self.completed = (self.bytesSent == self.fileSize)
self.transport.loseConnection()
def handle_CCL(self, params):
self.completed = (self.bytesSent == self.fileSize)
self.transport.loseConnection()
def handle_UNKNOWN(self, cmd, params): log.msg('received unknown command (%s), params: %s' % (cmd, params))
def makeHeader(self, size):
""" make the appropriate header given a specific segment size. """
quotient, remainder = divmod(size, 256)
return chr(0) + chr(remainder) + chr(quotient)
def sendPart(self):
""" send a segment of data """
if not self.connected:
self._pendingSend = None
return data = self.file.read(self.segmentSize)
if data:
dataSize = len(data)
header = self.makeHeader(dataSize)
self.transport.write(header + data)
self.bytesSent += dataSize
self._pendingSend = reactor.callLater(0, self.sendPart)
else:
self._pendingSend = None
self.completed = 1
errorCodes = {
200 : "Syntax error",
201 : "Invalid parameter",
205 : "Invalid user",
206 : "Domain name missing",
207 : "Already logged in",
208 : "Invalid username",
209 : "Invalid screen name",
210 : "User list full",
215 : "User already there",
216 : "User already on list",
217 : "User not online",
218 : "Already in mode",
219 : "User is in the opposite list",
223 : "Too many groups",
224 : "Invalid group",
225 : "User not in group",
229 : "Group name too long",
230 : "Cannot remove group 0",
231 : "Invalid group",
280 : "Switchboard failed",
281 : "Transfer to switchboard failed",
300 : "Required field missing",
301 : "Too many FND responses",
302 : "Not logged in",
500 : "Internal server error",
501 : "Database server error",
502 : "Command disabled",
510 : "File operation failed",
520 : "Memory allocation failed",
540 : "Wrong CHL value sent to server",
600 : "Server is busy",
601 : "Server is unavaliable",
602 : "Peer nameserver is down",
603 : "Database connection failed",
604 : "Server is going down",
605 : "Server unavailable",
707 : "Could not create connection",
710 : "Invalid CVR parameters",
711 : "Write is blocking",
712 : "Session is overloaded",
713 : "Too many active users",
714 : "Too many sessions",
715 : "Not expected",
717 : "Bad friend file",
731 : "Not expected",
800 : "Requests too rapid",
910 : "Server too busy",
911 : "Authentication failed",
912 : "Server too busy",
913 : "Not allowed when offline",
914 : "Server too busy",
915 : "Server too busy",
916 : "Server too busy",
917 : "Server too busy",
918 : "Server too busy",
919 : "Server too busy",
920 : "Not accepting new users",
921 : "Server too busy",
922 : "Server too busy",
923 : "No parent consent",
924 : "Passport account not yet verified"
}
statusCodes = {
STATUS_ONLINE : "Online",
STATUS_OFFLINE : "Offline",
STATUS_HIDDEN : "Appear Offline",
STATUS_IDLE : "Idle",
STATUS_AWAY : "Away",
STATUS_BUSY : "Busy",
STATUS_BRB : "Be Right Back",
STATUS_PHONE : "On the Phone",
STATUS_LUNCH : "Out to Lunch"
}
listIDToCode = {
FORWARD_LIST : 'fl',
BLOCK_LIST : 'bl',
ALLOW_LIST : 'al',
REVERSE_LIST : 'rl'
}
listCodeToID = {}
for id,code in listIDToCode.items():
listCodeToID[code] = id
del id, code