# -*- test-case-name: twisted.test.test_ftp -*-
# Twisted, the Framework of Your Internet
# Copyright (C) 2001 Matthew W. Lefkowitz
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of version 2.1 of the GNU Lesser General Public
# License as published by the Free Software Foundation.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
"""
An FTP protocol implementation
Maintainer: U{Jonathan D. Simms<mailto:slyphon@twistedmatrix.com>}
"""
# System Imports
import os
import time
import string
import types
import re
from cStringIO import StringIO
from math import floor
# Twisted Imports
from twisted.internet import abstract, reactor, protocol, error, defer
from twisted.internet.interfaces import IProducer, IConsumer, IProtocol, IFinishableConsumer
from twisted.protocols import basic, policies
from twisted.internet.protocol import ClientFactory, ServerFactory, Protocol, \
ConsumerToProtocolAdapter
from twisted import application, internet, python
from twisted.python import failure, log, components
from twisted.cred import error as cred_error, portal, checkers, credentials
# constants
# transfer modes
PASV = 1
PORT = 2
ENDLN = str('\015\012')
# response codes
RESTART_MARKER_REPLY = "100"
SERVICE_READY_IN_N_MINUTES = "120"
DATA_CNX_ALREADY_OPEN_START_XFR = "125"
FILE_STATUS_OK_OPEN_DATA_CNX = "150"
CMD_OK = "200.1"
TYPE_SET_OK = "200.2"
ENTERING_PORT_MODE = "200.3"
CMD_NOT_IMPLMNTD_SUPERFLUOUS = "202"
SYS_STATUS_OR_HELP_REPLY = "211"
DIR_STATUS = "212"
FILE_STATUS = "213"
HELP_MSG = "214"
NAME_SYS_TYPE = "215"
SVC_READY_FOR_NEW_USER = "220.1"
WELCOME_MSG = "220.2"
SVC_CLOSING_CTRL_CNX = "221"
GOODBYE_MSG = "221"
DATA_CNX_OPEN_NO_XFR_IN_PROGRESS = "225"
CLOSING_DATA_CNX = "226"
TXFR_COMPLETE_OK = "226"
ENTERING_PASV_MODE = "227"
ENTERING_EPSV_MODE = "229"
USR_LOGGED_IN_PROCEED = "230.1" # v1 of code 230
GUEST_LOGGED_IN_PROCEED = "230.2" # v2 of code 230
REQ_FILE_ACTN_COMPLETED_OK = "250"
PWD_REPLY = "257"
USR_NAME_OK_NEED_PASS = "331.1" # v1 of Code 331
GUEST_NAME_OK_NEED_EMAIL = "331.2" # v2 of code 331
NEED_ACCT_FOR_LOGIN = "332"
REQ_FILE_ACTN_PENDING_FURTHER_INFO = "350"
SVC_NOT_AVAIL_CLOSING_CTRL_CNX = "421.1"
TOO_MANY_CONNECTIONS = "421.2"
CANT_OPEN_DATA_CNX = "425"
CNX_CLOSED_TXFR_ABORTED = "426"
REQ_ACTN_ABRTD_FILE_UNAVAIL = "450"
REQ_ACTN_ABRTD_LOCAL_ERR = "451"
REQ_ACTN_ABRTD_INSUFF_STORAGE = "452"
SYNTAX_ERR = "500"
SYNTAX_ERR_IN_ARGS = "501"
CMD_NOT_IMPLMNTD = "502"
BAD_CMD_SEQ = "503"
CMD_NOT_IMPLMNTD_FOR_PARAM = "504"
NOT_LOGGED_IN = "530.1" # v1 of code 530 - please log in
AUTH_FAILURE = "530.2" # v2 of code 530 - authorization failure
NEED_ACCT_FOR_STOR = "532"
FILE_NOT_FOUND = "550.1" # no such file or directory
PERMISSION_DENIED = "550.2" # permission denied
ANON_USER_DENIED = "550.3" # anonymous users can't alter filesystem
IS_NOT_A_DIR = "550.4" # rmd called on a path that is not a directory
REQ_ACTN_NOT_TAKEN = "550.5"
PAGE_TYPE_UNK = "551"
EXCEEDED_STORAGE_ALLOC = "552"
FILENAME_NOT_ALLOWED = "553"
RESPONSE = {
# -- 100's --
RESTART_MARKER_REPLY: '110 MARK yyyy-mmmm', # TODO: this must be fixed
SERVICE_READY_IN_N_MINUTES: '120 service ready in %s minutes',
DATA_CNX_ALREADY_OPEN_START_XFR: '125 Data connection already open, starting transfer',
FILE_STATUS_OK_OPEN_DATA_CNX: '150 File status okay; about to open data connection.',
# -- 200's --
CMD_OK: '200 Command OK',
TYPE_SET_OK: '200 Type set to %s.',
ENTERING_PORT_MODE: '200 PORT OK',
CMD_NOT_IMPLMNTD_SUPERFLUOUS: '202 command not implemented, superfluous at this site',
SYS_STATUS_OR_HELP_REPLY: '211 system status reply',
DIR_STATUS: '212 %s',
FILE_STATUS: '213 %s',
HELP_MSG: '214 help: %s',
NAME_SYS_TYPE: '215 UNIX Type: L8',
WELCOME_MSG: "220-Welcome, ask your doctor if twistedmatrix.com is right for you!\r\n220 Features p .",
SVC_READY_FOR_NEW_USER: '220 Service ready',
GOODBYE_MSG: '221 Goodbye.',
DATA_CNX_OPEN_NO_XFR_IN_PROGRESS: '225 data connection open, no transfer in progress',
CLOSING_DATA_CNX: '226 Abort successful',
TXFR_COMPLETE_OK: '226 Transfer Complete.',
ENTERING_PASV_MODE: '227 =%s',
ENTERING_EPSV_MODE: '229 Entering Extended Passive Mode (|||%s|).', # where is epsv defined in the rfc's?
USR_LOGGED_IN_PROCEED: '230 User logged in, proceed',
GUEST_LOGGED_IN_PROCEED: '230 Anonymous login ok, access restrictions apply.',
REQ_FILE_ACTN_COMPLETED_OK: '250 Requested File Action Completed OK', #i.e. CWD completed ok
PWD_REPLY: '257 "%s" is current directory.',
# -- 300's --
'userotp': '331 Response to %s.', # ???
USR_NAME_OK_NEED_PASS: '331 Password required for %s.',
GUEST_NAME_OK_NEED_EMAIL: '331 Guest login ok, type your email address as password.',
# -- 400's --
SVC_NOT_AVAIL_CLOSING_CTRL_CNX: '421 Service not available, closing control connection.',
TOO_MANY_CONNECTIONS: '421 Too many users right now, try again in a few minutes.',
CANT_OPEN_DATA_CNX: "425 Can't open data connection.",
CNX_CLOSED_TXFR_ABORTED: '426 Transfer aborted. Data connection closed.',
# -- 500's --
SYNTAX_ERR: "500 '%s': syntax error, command not understood.",
SYNTAX_ERR_IN_ARGS: '501 syntax error in argument(s) %s.',
CMD_NOT_IMPLMNTD: "502 command '%s' not implemented",
BAD_CMD_SEQ: '503 Incorrect sequence of commands: %s',
CMD_NOT_IMPLMNTD_FOR_PARAM: "504 Not implemented for parameter '%s'.",
NOT_LOGGED_IN: '530 Please login with USER and PASS.',
AUTH_FAILURE: '530 Sorry, Authentication failed. %s',
NEED_ACCT_FOR_STOR: '532 Need an account for storing files',
FILE_NOT_FOUND: '550 %s: No such file or directory.',
PERMISSION_DENIED: '550 %s: Permission denied.',
ANON_USER_DENIED: '550 Anonymous users are forbidden to change the filesystem',
IS_NOT_A_DIR: '550 cannot rmd, %s is not a directory',
REQ_ACTN_NOT_TAKEN: '550 requested action not taken: %s',
EXCEEDED_STORAGE_ALLOC: '552 requested file action aborted, exceeded file storage allocation',
FILENAME_NOT_ALLOWED: '553 requested action not taken, file name not allowed'
}
# -- Custom Exceptions --
class TLDNotSetInRealmError(Exception):
'''raised if the tld (root) directory for the Realm was not set
before requestAvatar was called'''
pass
class FileNotFoundError(Exception):
pass
class PermissionDeniedError(Exception):
pass
class AnonUserDeniedError(Exception):
"""raised when an anonymous user issues a command
that will alter the filesystem
"""
pass
class IsNotADirectoryError(Exception):
"""raised when RMD is called on a path that isn't a directory
"""
pass
class OperationFailedError(Exception):
"""raised when a command like rmd or mkdir fails for a reason other than permissions errors
"""
pass
class CmdSyntaxError(Exception):
pass
class CmdArgSyntaxError(Exception):
pass
class CmdNotImplementedError(Exception):
"""raised when an unimplemented command is given to the server
"""
pass
class CmdNotImplementedForArgError(Exception):
pass
class FTPError(Exception):
pass
class FTPTimeoutError(Exception):
pass
class DTPError(Exception):
pass
class BogusClientError(Exception):
"""thrown when a client other than the one we opened this
DTP connection for attempts to connect, or a client attempts to
get us to connect to an ip that differs from the one where the
request came from"""
pass
class PathBelowTLDError(Exception):
pass
class ClientDisconnectError(Exception):
pass
class BadCmdSequenceError(Exception):
"""raised when a client sends a series of commands in an illogical sequence"""
pass
class AuthorizationError(Exception):
"""raised when client authentication fails"""
pass
# -- DTP Protocol --
class DTPFileSender(basic.FileSender):
def resumeProducing(self):
chunk = ''
if self.file:
chunk = self.file.read(self.CHUNK_SIZE)
#log.debug('chunk: %s' % chunk)
if not chunk:
self.file = None
self.consumer.unregisterProducer()
log.debug("producer has unregistered?: %s" % (self.consumer.producer is None))
if self.deferred:
self.deferred.callback(self.lastSent)
self.deferred = None
return
if self.transform:
chunk = self.transform(chunk)
self.consumer.write(chunk)
self.lastSent = chunk[-1]
def stopProducing(self):
if self.deferred:
self.deferred.errback(ClientDisconnectError())
self.deferred = None
# -- Utility Functions --
def debugDeferred(self, *_):
log.debug('debugDeferred(): %s' % str(_))
def _getFPName(fp):
"""returns a file object's name attr if it has one,
otherwise it returns "<string>"
"""
if hasattr(fp, 'name'):
return fp.name
# stringIO objects have no .name attr
return getattr(fp, 'name', '<string>')
class IDTPParent(object):
"""An interface for protocols that wish to use a DTP sub-protocol and
factory.
@ivar dtpFactory: the dtp factory that creates an instance when needed
@ivar dtpInstance: the instance that the factory creates. since only
one dtp instance is created, this will be a single object reference
@ivar dtpTxfrMode: binary or ascii, right now dtp ignores this and only
does binary transfers
@ivar dtpPort: value returned from listenTCP or connectTCP
@ivar peerHost: the (type,ip,port) of the other server
"""
def finishedFileTransfer(self):
"""performs cleanup on the dtpInstance once the transfer is complete"""
pass
class IDTPFactory(object):
"""An interface for protocol.Factories
@ivar peerCheck: perform checks to make sure the ftp-pi's peer is the same
as the dtp's
@ivar pi: a reference to this factory's protocol interpreter
"""
def __init__(self, pi, peerHost=None):
"""Constructor
@param pi: this factory's protocol interpreter
@param peerHost: if peerCheck is True, this is the tuple that the
generated instance will use to perform security checks
"""
pass
class DTP(object, protocol.Protocol):
"""The Data Transfer Protocol for this FTP-PI instance
all dtp_* methods return a deferred
"""
isConnected = False
reTransform = re.compile(r'(?<!\r)\n') # says, match an \n that's not immediately preceeded by a \r
def connectionMade(self):
"""Will start an transfer, if one is queued up,
when the client connects"""
self.pi.setTimeout(None) # don't timeout as long as we have a connection
peer = self.transport.getPeer()
self.isConnected = True
if self.factory.peerCheck and peer[1] != self.pi.peerHost[1]:
# DANGER Will Robinson! Bailing!
log.debug('dtp ip did not match ftp ip')
d.errback(BogusClientError("%s != %s" % (peer[1], self.pi.peerHost[1])))
return
log.debug('firing dtpFactory deferred')
d, self.factory.deferred = self.factory.deferred, defer.Deferred()
d.callback(None)
def transformChunk(self, chunk):
log.msg('transformChunk: before = %s' % chunk)
newChunk = self.reTransform.sub('\r\n', chunk)
log.msg('transformChunk: after = %s' % newChunk)
return newChunk
def dtp_RETR(self): # RETR = sendFile
"""ssnds a file object out the wire
@param fpSizeTuple a tuple of a file object and that file's size
"""
filename = _getFPName(self.pi.fp)
log.debug('sendfile sending %s' % filename)
fs = DTPFileSender()
if self.pi.binary:
transform = None
else:
transform = self.transformChunk
# lets set self.pi.fp file pointer to 0 just to
# make sure the avatar didn't forget, hmm?
self.pi.fp.seek(0)
return fs.beginFileTransfer(self.pi.fp, self.transport, transform
).addCallback(debugDeferred,'firing at end of file transfer'
).addCallback(self._dtpPostTransferCleanup
)
def _dtpPostTransferCleanup(self, *arg):
log.debug("dtp._dtpPostTransferCleanup")
self.transport.loseConnection()
def connectionLost(self, reason):
log.debug('dtp.connectionLost: %s' % reason)
self.pi.finishedFileTransfer()
self.isConnected = False
class DTPFactory(protocol.Factory):
__implements__ = (IDTPFactory,)
# -- configuration variables --
peerCheck = True
# -- class variables --
def __init__(self, pi, peerHost=None):
self.pi = pi # the protocol interpreter that is using this factory
self.peerHost = peerHost # the from FTP.transport.peerHost()
self.deferred = defer.Deferred() # deferred will fire when instance is connected
self.delayedCall = None
def buildProtocol(self, addr):
log.debug('DTPFactory.buildProtocol')
self.cancelTimeout()
if self.pi.dtpInstance: # only create one instance
return
p = DTP()
p.factory = self
p.pi = self.pi
self.pi.dtpInstance = p
return p
def stopFactory(self):
log.debug('dtpFactory.stopFactory')
self.cancelTimeout()
def timeoutFactory(self):
log.msg('timed out waiting for DTP connection')
if self.deferred:
d, self.deferred = self.deferred, None
# TODO: LEFT OFF HERE!
d.addErrback(debugDeferred, 'timeoutFactory firing errback')
d.errback(defer.TimeoutError())
self.stopFactory()
def cancelTimeout(self):
if not self.delayedCall.called and not self.delayedCall.cancelled:
log.debug('cancelling DTP timeout')
self.delayedCall.cancel()
assert self.delayedCall.cancelled
log.debug('timeout has been cancelled')
def setTimeout(self, seconds):
log.msg('DTPFactory.setTimeout set to %s seconds' % seconds)
self.delayedCall = reactor.callLater(seconds, self.timeoutFactory)
# -- FTP-PI (Protocol Interpreter) --
def cleanPath(path):
# cleanup backslashes and multiple foreslashes
log.debug("pre-cleaned path: %s" % path)
if path:
path = re.sub(r'[\\]{2,}?', '/', path)
path = re.sub(r'[/]{2,}?','/', path)
path = re.sub(r'[*]?', '', path)
path = os.path.normpath(path)
log.debug('cleaned path: %s' % path)
return path
class FTP(object, basic.LineReceiver, policies.TimeoutMixin):
"""Protocol Interpreter for the File Transfer Protocol
@ivar shell: The connected avatar
@ivar user: The username of the connected client
@ivar peerHost: The (type, ip, port) of the client
@ivar dtpTxfrMode: The current mode -- PASV or PORT
@ivar blocked: Command queue for command pipelining
@ivar binary: The transfer mode. If false, ASCII.
@ivar dtpFactory: Generates a single DTP for this session
@ivar dtpPort: Port returned from listenTCP
@ivar dtpInetPort: dtpPort.getHost()
@ivar dtpHostPort: cluient (address, port) to connect to on a PORT command
"""
__implements__ = (IDTPParent,IProtocol,)
# FTP is a bit of a misonmer, as this is the PI - Protocol Interpreter
blockingCommands = ['RETR', 'STOR', 'LIST', 'PORT']
reTelnetChars = re.compile(r'(\\x[0-9a-f]{2}){1,}')
# how long the DTP waits for a connection
dtpTimeout = 10
# if this instance is the upper limit of instances allowed, then
# reply with appropriate error message and drop the connection
instanceNum = 0
portal = None
shell = None # the avatar
user = None # the username of the client connected
peerHost = None # the (type,ip,port) of the client
dtpTxfrMode = None # PASV or PORT, no default
blocked = None # a command queue for pipelining
dtpFactory = None # generates a single DTP for this session
dtpInstance = None # a DTP protocol instance
dtpPort = None # object returned from listenTCP
dtpInetPort = None # result of dtpPort.getHost() used for saving inet port number
dtpHostPort = None # client address/port to connect to on PORT command
binary = True # binary transfers? False implies ASCII. defaults to True
def connectionMade(self):
log.debug('ftp-pi connectionMade: instance %s' % self.instanceNum)
# TODO: add tests for this!
if (self.factory.maxProtocolInstances is not None and
self.instanceNum >= self.factory.maxProtocolInstances):
self.reply(TOO_MANY_CONNECTIONS)
self.transport.loseConnection()
return
self.reply(WELCOME_MSG)
self.peerHost = self.transport.getPeer()
self.setTimeout(self.timeOut)
# self.__testingautologin()
def __testingautologin(self):
import warnings; warnings.warn("""
--> DEBUGGING CODE ACTIVE!!! <--
""")
reactor._pi = self
#lr = self.lineReceived
#lr('USER anonymous')
#lr('PASS f@d.com')
#lr('PASV')
#lr('LIST')
#lr('RETR .vim/vimrc')
#lr('RETR Session.vim')
def connectionLost(self, reason):
log.msg("Oops! lost connection\n %s" % reason)
# if we have a DTP protocol instance running and
# we lose connection to the client's PI, kill the
# DTP connection and close the port
if self.dtpFactory:
self.cleanupDTP()
self.setTimeout(None)
# TODO: WE NEED TO REMOVE THIS CRUD!!!
self.factory.currentInstanceNum -= 1
if hasattr(self.shell, 'logout') and self.shell.logout is not None:
self.shell.logout()
def timeoutConnection(self):
log.msg('FTP timed out')
self.transport.loseConnection()
#if self.dtpFactory is not None and self.dtpFactory.deferred is not None:
#d, self.dtpFactory.deferred = self.dtpFactory.deferred, None
#d.errback(FTPTimeoutError('cleaning up dtp!'))
def setTimeout(self, seconds):
log.msg('ftp.setTimeout to %s seconds' % str(seconds))
policies.TimeoutMixin.setTimeout(self, seconds)
def reply(self, key, s=''):
"""format a RESPONSE and send it out over the wire"""
if string.find(RESPONSE[key], '%s') > -1:
log.debug(RESPONSE[key] % s + ENDLN)
self.transport.write(RESPONSE[key] % s + ENDLN)
else:
log.debug(RESPONSE[key] + ENDLN)
self.transport.write(RESPONSE[key] + ENDLN)
def lineReceived(self, line):
"Process the input from the client"
self.resetTimeout()
line = string.strip(line)
log.debug(repr(line))
line = self.reTelnetChars.sub('', line) # clean up '\xff\xf4\xff' nonsense
line = line.encode()
try:
cmdAndArgs = line.split(' ',1)
log.debug('processing command %s' % cmdAndArgs)
self.processCommand(*cmdAndArgs)
except CmdSyntaxError, (e,):
self.reply(SYNTAX_ERR, string.upper(command))
except CmdArgSyntaxError, (e,):
log.debug(e)
self.reply(SYNTAX_ERR_IN_ARGS, e)
except AnonUserDeniedError, (e,):
log.debug(e)
self.reply(ANON_USER_DENIED, e)
except CmdNotImplementedError, (e,):
log.debug(e)
self.reply(CMD_NOT_IMPLMNTD, e)
except BadCmdSequenceError, (e,):
log.debug(e)
self.reply(BAD_CMD_SEQ, e)
except AuthorizationError, (e,):
log.debug(e)
self.reply(AUTH_FAILURE, 'internal server error')
except FileNotFoundError, (e,):
log.debug(e)
self.reply(FILE_NOT_FOUND, e)
except PathBelowTLDError, (e,):
log.debug(e)
self.reply(PERMISSION_DENIED, e)
except OperationFailedError, (e,):
log.debug(e)
self.reply(REQ_ACTN_NOT_TAKEN, '')
except Exception, e:
log.err(e)
self.reply(REQ_ACTN_NOT_TAKEN, 'internal server error')
raise
def processCommand(self, cmd, *args):
log.debug('FTP.processCommand: cmd = %s, args = %s' % (cmd,args))
if self.blocked != None: # all DTP commands block,
log.debug('FTP is queueing command: %s' % cmd)
self.blocked.append((cmd,args)) # so queue new requests
return
cmd = cmd.upper()
if cmd not in ['USER','PASS'] and not self.shell: # these are the only two commands that don't require
log.debug('ftp_%s returning, user not logged in' % cmd) # an authenticated user
self.reply(NOT_LOGGED_IN)
return
if cmd in self.blockingCommands: # if this is a DTP related command
log.debug('FTP.processCommand: cmd %s in blockingCommands' % cmd)
if not self.dtpInstance: # if no one has connected yet
log.debug('FTP.processCommand: self.dtpInstance = %s' % self.dtpInstance)
# a bit hackish, but manually blocks this command
# until we've set up the DTP protocol instance
# _unblock will run this first command and subsequent
self.blocked = [(cmd,args)] # add item to queue and start blocking
log.debug('during dtp setup, blocked = %s' % self.blocked)
return
method = getattr(self, "ftp_%s" % cmd, None) # try to find the method in this class
log.debug('FTP.processCommand: method = %s' % method)
if method:
return method(*args)
raise CmdNotImplementedError(cmd) # if we didn't find cmd, raise an error and alert client
def _unblock(self, *_):
log.debug('_unblock running') # unblock commands
commands = self.blocked
self.blocked = None # reset blocked to allow new commands
while commands and self.blocked is None: # while no other method has set self.blocked
cmd, args = commands.pop(0) # pop a command off the queue
self.processCommand(cmd, *args) # and process it
if self.blocked is not None: # if someone has blocked during the time we were processing
self.blocked.extend(commands) # add our commands that we dequeued back into the queue
def _createDTP(self):
self.setTimeout(None) # don't timeOut when setting up DTP
log.debug('_createDTP')
if not self.dtpFactory:
phost = self.transport.getPeer()[1]
self.dtpFactory = DTPFactory(pi=self, peerHost=phost)
self.dtpFactory.setTimeout(self.dtpTimeout)
if not hasattr(self, 'TestingSoJustSkipTheReactorStep'): # to allow for testing
if self.dtpTxfrMode == PASV:
self.dtpPort = reactor.listenTCP(0, self.dtpFactory)
elif self.dtpTxfrMode == PORT:
self.dtpPort = reactor.connectTCP(self.dtpHostPort[1], self.dtpHostPort[2])
else:
log.err('SOMETHING IS SCREWY: _createDTP')
d = self.dtpFactory.deferred
d.addCallback(debugDeferred, 'dtpFactory deferred')
d.addCallback(self._unblock) # VERY IMPORTANT: call _unblock when client connects
d.addErrback(self._ebDTP)
def _ebDTP(self, error):
log.msg(error)
self.setTimeout(self.factory.timeOut) # restart timeOut clock after DTP returns
r = error.trap(defer.TimeoutError, # this is called when DTP times out
BogusClientError, # called if PI & DTP clients don't match
FTPTimeoutError, # called when FTP connection times out
ClientDisconnectError) # called if client disconnects prematurely during DTP transfer
if r == defer.TimeoutError:
self.reply(CANT_OPEN_DATA_CNX)
elif r in (BogusClientError, FTPTimeoutError):
self.reply(SVC_NOT_AVAIL_CLOSING_CTRL_CNX)
self.transport.loseConnection()
elif r == ClientDisconnectError:
self.reply(CNX_CLOSED_TXFR_ABORTED)
# if we timeout, or if an error occurs,
# all previous commands are junked
self.blocked = None
def cleanupDTP(self):
"""call when DTP connection exits
"""
log.debug('cleanupDTP')
dtpPort, self.dtpPort = self.dtpPort, None
try:
dtpPort.stopListening()
except AttributeError, (e,):
log.msg('Already Called dtpPort.stopListening!!!: %s' % e)
self.dtpFactory.stopFactory()
if self.dtpFactory is None:
log.debug('ftp.dtpFactory already set to None')
else:
self.dtpFactory = None
if self.dtpInstance is None:
log.debug('ftp.dtpInstance already set to None')
else:
self.dtpInstance = None
def _doDTPCommand(self, cmd, *arg):
self.setTimeout(None) # don't Time out when waiting for DTP Connection
log.debug('FTP._doDTPCommand: self.blocked: %s' % self.blocked)
if self.blocked is None:
self.blocked = []
try:
f = getattr(self.dtpInstance, "dtp_%s" % cmd, None)
log.debug('running dtp function %s' % f)
except AttributeError, e:
log.err('SOMETHING IS SCREWY IN _doDTPCommand')
raise e
else:
self.dtpFactory.setTimeout(self.dtpTimeout)
if arg:
d = f(arg)
else:
d = f()
d.addCallback(debugDeferred, 'deferred returned to _doDTPCommand has fired')
d.addCallback(lambda _: self._cbDTPCommand())
d.addCallback(debugDeferred, 'running cleanupDTP')
d.addCallback(lambda _: self.cleanupDTP())
d.addCallback(debugDeferred, 'running ftp.setTimeout()')
d.addCallback(lambda _: self.setTimeout(self.factory.timeOut))
d.addCallback(debugDeferred, 'running ftp._unblock')
d.addCallback(lambda _: self._unblock())
d.addErrback(self._ebDTP)
def finishedFileTransfer(self, *arg):
"""called back when a file transfer has been completed by the dtp"""
log.debug('finishedFileTransfer! cleaning up DTP')
if self.fp is not None and not self.fp.closed:
if self.fp.tell() == self.fpsize:
log.debug('transfer completed okay :-)')
self.reply(TXFR_COMPLETE_OK)
else:
log.debug("uh-oh there was an error...must have been the client's fault")
self.reply(CNX_CLOSED_TXFR_ABORTED)
self.fp.close()
def _cbDTPCommand(self):
"""called back when any DTP command has completed successfully"""
log.debug("DTP Command success")
def ftp_USER(self, params):
"""Get the login name, and reset the session
PASS is expected to follow
from the rfc:
The argument field is a Telnet string identifying the user.
The user identification is that which is required by the
server for access to its file system. This command will
normally be the first command transmitted by the user after
the control connections are made
This has the effect of flushing any user, password, and account
information already supplied and beginning the login sequence
again. All transfer parameters are unchanged and any file transfer
in progress is completed under the old access control parameters.
"""
if params=='':
raise CmdSyntaxError('no parameters')
self.user = string.split(params)[0]
log.debug('ftp_USER params: %s' % params)
if self.factory.allowAnonymous and self.user == self.factory.userAnonymous:
self.reply(GUEST_NAME_OK_NEED_EMAIL)
else:
self.reply(USR_NAME_OK_NEED_PASS, self.user)
# TODO: add max auth try before timeout from ip...
# TODO: need to implement minimal ABOR command
def ftp_PASS(self, params=''):
"""Authorize the USER and the submitted password
from the rfc:
The argument field is a Telnet string specifying the user's
password. This command must be immediately preceded by the
user name command, and, for some sites, completes the user's
identification for access control.
"""
# the difference between an Anon login and a User login is
# the avatar that will be returned to the callback
if not self.user:
raise BadCmdSequenceError('USER required before PASS')
log.debug('ftp_PASS params: %s' % params)
if params == '':
raise CmdArgSyntaxError('you must specify a password with PASS')
self.passwd = params.split()[0] # parse password
# if this is an anonymous login
if self.factory.allowAnonymous and self.user == self.factory.userAnonymous:
self.passwd = params
if self.portal:
self.portal.login(
credentials.Anonymous(),
None,
IShell
).addCallbacks(self._cbAnonLogin, self._ebLogin
)
else:
# if cred has been set up correctly, this shouldn't happen
raise AuthorizationError('internal server error')
# otherwise this is a user login
else:
if self.portal:
self.portal.login(
credentials.UsernamePassword(self.user, self.passwd),
None,
IShell
).addCallbacks(self._cbLogin, self._ebLogin
)
else:
raise AuthorizationError('internal server error')
def _cbAnonLogin(self, (interface, avatar, logout)):
"""sets up anonymous login avatar"""
assert interface is IShell
peer = self.transport.getPeer()
# log.debug("Anonymous login from %s:%s" % (peer[1], peer[2]))
self.shell = avatar
self.logout = logout
self.reply(GUEST_LOGGED_IN_PROCEED)
def _cbLogin(self, (interface, avatar, logout)):
"""sets up authorized user login avatar"""
assert interface is IShell
self.shell = avatar
self.logout = logout
self.reply(USR_LOGGED_IN_PROCEED)
def _ebLogin(self, failure):
r = failure.trap(cred_error.UnauthorizedLogin, TLDNotSetInRealmError)
if r == TLDNotSetInRealmError:
log.debug(failure.getErrorMessage())
self.reply(REQ_ACTN_NOT_TAKEN, 'internal server error')
self.transport.loseConnection()
else:
self.reply(AUTH_FAILURE, '')
def ftp_TYPE(self, params):
p = params[0].upper()
if p[0] not in ['I', 'A', 'L']:
raise CmdArgSyntaxError(p[0])
elif p[0] in ['I', 'L']:
self.binary = True
self.reply(TYPE_SET_OK, p)
elif p[0] == 'A':
self.binary = False
self.reply(TYPE_SET_OK, p)
else:
raise CmdSyntaxError(p)
def ftp_SYST(self, params=None):
self.reply(NAME_SYS_TYPE)
def ftp_LIST(self, params=''):
""" This command causes a list to be sent from the server to the
passive DTP. If the pathname specifies a directory or other
group of files, the server should transfer a list of files
in the specified directory. If the pathname specifies a
file then the server should send current information on the
file. A null argument implies the user's current working or
default directory.
"""
log.debug('ftp_LIST: %s' % params)
if params == "-a": params = '' # bug in konqueror
if params == "-aL": params = '' # bug in gFTP 2.0.15
self.fp, self.fpsize = self.shell.list(cleanPath(params)) # returns a StringIO object
if self.dtpInstance and self.dtpInstance.isConnected:
self.reply(DATA_CNX_ALREADY_OPEN_START_XFR)
else:
self.reply(FILE_STATUS_OK_OPEN_DATA_CNX)
self._doDTPCommand('RETR')
def ftp_SIZE(self, params=''):
log.debug('ftp_SIZE: %s' % params)
filesize = self.shell.size(cleanPath(params))
self.reply(FILE_STATUS, filesize)
def ftp_MDTM(self, params=''):
log.debug('ftp_MDTM: %s' % params)
dtm = self.shell.mdtm(cleanPath(params))
self.reply(FILE_STATUS, dtm)
def ftp_PWD(self, params=''):
""" Print working directory command
"""
self.reply(PWD_REPLY, self.shell.pwd())
def ftp_PASV(self):
"""Request for a passive connection
reply is in format 227 =h1,h2,h3,h4,p1,p2
from the rfc:
This command requests the server-DTP to "listen" on a data
port (which is not its default data port) and to wait for a
connection rather than initiate one upon receipt of a
transfer command. The response to this command includes the
host and port address this server is listening on.
"""
# NOTE: Normally, the way DTP related commands work is that they
# go through the PI processing (what goes on here), and then make
# the appropriate call to _doDTPCommand.
#
# however, in this situation, since this is likely the first command
# that will be run that has to do with the DTP factory, we
# call _createDTP explicitly (as opposed to letting _doDTPCommand
# do it for us).
#
# summary: this method is a special case, so keep that in mind
#
log.debug('ftp_PASV')
self.dtpTxfrMode = PASV
if self.dtpFactory: # if we have a DTP port set up
self.cleanupDTP() # lose it
if not self.dtpFactory: # if we haven't set up a DTP port yet (or just closed one)
try:
self._createDTP()
except OSError, (e,): # we're watching for a could not listen on port error
log.msg("CRITICAL BUG!! THIS SHOULD NOT HAVE HAPPENED!!! %s" % e)
sockname = self.transport.getHost() # Use the ip from the PI-connection
localip = string.replace(sockname[1], '.', ',') # format the reply
lport = self.dtpPort.socket.getsockname()[1]
lp1 = lport / 256 # convert port into two 8-byte values
lp2, lp1 = str(lport - lp1*256), str(lp1)
self.reply(ENTERING_PASV_MODE, "%s,%s,%s" % (localip, lp1, lp2))
log.debug("passive port open on: %s:%s" % (localip, lport), level="debug")
def decodeHostPort(self, line):
"""Decode an FTP response specifying a host and port.
see RFC sec. 4.1.2 "PASV"
@returns: a 2-tuple of (host, port).
"""
#abcdef = re.sub('[^0-9, ]', '', line[4:])
abcdef = re.sub('[^0-9, ]', '', line)
a, b, c, d, e, f = map(str.strip, abcdef.split(','))
host = "%s.%s.%s.%s" % (a, b, c, d)
port = (int(e)<<8) + int(f)
return (host, port)
def ftp_PORT(self, params):
log.debug('ftp_PORT')
self.dtpTxfrMode = PORT
self.dtpHostPort = self.decodeHostPort(params)
if self.dtpFactory: # if we have a DTP port set up
self.cleanupDTP() # lose it
if not self.dtpFactory: # if we haven't set up a DTP port yet (or just closed one)
try:
self._createDTP()
except OSError, (e,): # we're watching for a could not listen on port error
log.msg("CRITICAL BUG!! THIS SHOULD NOT HAVE HAPPENED!!! %s" % e)
self.reply(PORT_MODE_OK)
def ftp_CWD(self, params):
self.shell.cwd(cleanPath(params))
self.reply(REQ_FILE_ACTN_COMPLETED_OK)
def ftp_CDUP(self):
self.shell.cdup()
self.reply(REQ_FILE_ACTN_COMPLETED_OK)
def ftp_RETR(self, params):
if self.dtpTxfrMode is None:
raise BadCmdSequenceError('must send PORT or PASV before RETR')
self.fp, self.fpsize = self.shell.retr(cleanPath(params))
log.debug('self.fp = %s, self.fpsize = %s' % (self.fp, self.fpsize))
if self.dtpInstance and self.dtpInstance.isConnected:
self.reply(DATA_CNX_ALREADY_OPEN_START_XFR)
else:
self.reply(FILE_STATUS_OK_OPEN_DATA_CNX)
self._doDTPCommand('RETR')
def ftp_STRU(self, params=""):
p = params.upper()
if params == 'F':
return self.reply(CMD_OK)
raise CmdNotImplementedForArgError(params)
def ftp_MODE(self, params=""):
p = params.upper()
if params == 'S':
return self.reply(CMD_OK)
raise CmdNotImplementedForArgError(params)
def ftp_QUIT(self, params=''):
self.transport.loseConnection()
log.debug("Client Quit")
class Factory(protocol.Factory):
"""A factory for producing ftp protocol instances
@ivar maxProtocolInstances: the maximum number of FTP protocol instances
this factory will create. When the maximum number is reached, a protocol
instance will be spawned that will give the "Too many connections" message
to the client and then close the connection.
@ivar timeOut: the protocol interpreter's idle timeout time in seconds, default is 600 seconds
"""
protocol = FTP
allowAnonymous = True
userAnonymous = 'anonymous'
timeOut = 600
maxProtocolInstances = None
currentInstanceNum = 0
instances = []
def __init__(self, portal=None, userAnonymous='anonymous',
maxProtocolInstances=None):
self.portal = portal
self.userAnonymous = 'anonymous'
self.maxProtocolInstances = maxProtocolInstances
reactor._pi = self
def buildProtocol(self, addr):
log.debug('%s of %s max ftp instances: ' % (self.currentInstanceNum, self.maxProtocolInstances))
pi = protocol.Factory.buildProtocol(self, addr)
pi.protocol = self.protocol
pi.portal = self.portal
pi.timeOut = Factory.timeOut
pi.factory = self
if self.maxProtocolInstances is not None:
self.currentInstanceNum += 1
pi.instanceNum = self.currentInstanceNum
self.instances.append(pi)
return pi
def stopFactory(self):
# make sure ftp instance's timeouts are set to None
# to avoid reactor complaints
[p.setTimeout(None) for p in self.instances if p.timeOut is not None]
FTPFactory = Factory
# -- Cred Objects --
class IShell(components.Interface):
"""An abstraction of the shell commands used by the FTP protocol
for a given user account
"""
def mapCPathToSPath(self, path):
"""converts a specified path relative to the user's top level directory
into a path in the filesystem representation
example: if the user's tld is /home/foo and there's a file in the filesystem
/home/foo/bar/spam.tar.gz the user would specify path /bar/spam.tar.gz in the
ftp command, and this function would translate it into /home/foo/bar/spam.tar.gz
@returns a tuple (cpath, spath) where cpath is the client's top level directory
plus path, and spath is cpath in relation to the server's filesystem.
cpath is an illusion, spath is a real file in the filesystem
"""
pass
def pwd(self):
""" Print working directory command
"""
pass
def cwd(self, path):
"""Change working directory
from the rfc:
This command allows the user to work with a different
directory or dataset for file storage or retrieval without
altering his login or accounting information. Transfer
parameters are similarly unchanged. The argument is a
pathname specifying a directory or other system dependent
file group designator.
@param path: the path you're interested in
@type path: string
"""
pass
def cdup(self):
"""changes to the parent of the current working directory
"""
pass
def size(self, path):
"""returns the size of the file specified by path in bytes
"""
pass
def mkd(self, path):
""" This command causes the directory specified in the pathname
to be created as a directory (if the pathname is absolute)
or as a subdirectory of the current working directory (if
the pathname is relative).
@param path: the path you're interested in
@type path: string
"""
pass
def rmd(self, path):
""" This command causes the directory specified in the pathname
to be removed as a directory (if the pathname is absolute)
or as a subdirectory of the current working directory (if
the pathname is relative).
@param path: the path you're interested in
@type path: string
"""
pass
def dele(self, path):
"""This command causes the file specified in the pathname to be
deleted at the server site.
@param path: the path you're interested in
@type path: string
"""
pass
def list(self, path):
"""@return: a tuple of (StringIO_object, size) containing the directory
listing to be sent to the client via the DTP
from the rfc:
This command causes a list to be sent from the server to the
passive DTP. If the pathname specifies a directory or other
group of files, the server should transfer a list of files
in the specified directory. If the pathname specifies a
file then the server should send current information on the
file. A null argument implies the user's current working or
default directory.
"""
pass
def nlst(self, path):
"""This command causes a directory listing to be sent from
server to user site. The pathname should specify a
directory or other system-specific file group descriptor; a
null argument implies the current directory. This command is intended
to return information that can be used by a program to
further process the files automatically. For example, in
the implementation of a "multiple get" function.
@param path: the path to generate output for
@type path: string
"""
pass
def retr(self, path):
""" This command causes the server-DTP to transfer a copy of the
file, specified in the pathname, to the server- or user-DTP
at the other end of the data connection. The status and
contents of the file at the server site shall be unaffected.
@return: a tuple of (fp, size) where fp is an opened file-like object
to the data requested and size is the size, in bytes, of fp
"""
pass
def stor(self, params):
"""This command causes the server-DTP to accept the data
transferred via the data connection and to store the data as
a file at the server site. If the file specified in the
pathname exists at the server site, then its contents shall
be replaced by the data being transferred. A new file is
created at the server site if the file specified in the
pathname does not already exist.
"""
pass
def mdtm(self, path):
"""get the date and time for path
@param path: the path you're interested in
@type path: string
@return: the date of path in the form of %Y%m%d%H%M%S
@rtype: string
"""
pass
try:
import pwd, grp
except ImportError:
# not a POSIX platform
pass
def _callWithDefault(default, _f, *_a, **_kw):
try:
return _f(*_a, **_kw)
except KeyError:
return default
def _memberGIDs(gid):
"""returns a list of all gid's that are a member of group with id
"""
gr_mem = 3
return grp.getgrgid(gid)[gr_mem]
def _testPermissions(uid, gid, spath, mode='r'):
"""checks to see if uid has proper permissions to access path with mode
@param uid: numeric user id
@type uid: int
@param gid: numeric group id
@type gid: int
@param spath: the path on the server to test
@type spath: string
@param mode: 'r' or 'w' (read or write)
@type mode: string
@returns: a True if the uid can access path
@rval: Boolean
"""
import os.path as osp
import stat
if mode not in ['r', 'w']:
raise ValueError("mode argument must be 'r' or 'w'")
readMasks = {'usr': stat.S_IRUSR, 'grp': stat.S_IRGRP, 'oth': stat.S_IROTH}
writeMasks = {'usr': stat.S_IWUSR, 'grp': stat.S_IWGRP, 'oth': stat.S_IWOTH}
modes = {'r': readMasks, 'w': writeMasks}
log.msg('running _testPermissions')
if osp.exists(spath):
s = os.lstat(spath)
if uid == 0: # root is superman, can access everything
log.msg('uid == root, can do anything!')
return True
elif modes[mode]['usr'] & s.st_mode > 0 and uid == s.st_uid:
log.msg('usr has proper permissions')
return True
elif ((modes[mode]['grp'] & s.st_mode > 0) and
(gid == s.st_gid or gid in _memberGIDs(gid))):
log.msg('grp has proper permissions')
return True
elif modes[mode]['oth'] & s.st_mode > 0:
log.msg('oth has proper permissions')
return True
return False
class AnonymousShell(object):
"""Only works on POSIX platforms at the moment."""
__implements__ = (IFTPShell,)
uid = None # uid of anonymous user for shell
gid = None # gid of anonymous user for shell
clientwd = '/'
filepath = None
def __init__(self, user=None, tld=None):
"""Constructor
@param user: the name of the user whose permissions we'll be using
@type user: string
"""
self.user = user # user name
self.tld = tld
self.debug = True
# TODO: self.user needs to be set to something!!!
if self.user is None:
uid = os.getuid()
self.user = pwd.getpwuid(os.getuid())[0]
self.getUserUIDAndGID()
#if self.tld is not None:
#self.filepath = python.FilePath(self.tld)
def getUserUIDAndGID(self):
"""used to set up permissions checking. finds the uid and gid of
the shell.user. called during __init__
"""
log.msg('getUserUIDAndGID')
pw_name, pw_passwd, pw_uid, pw_gid, pw_dir = range(5)
try:
p = pwd.getpwnam(self.user)
self.uid, self.gid = p[pw_uid], p[pw_gid]
log.debug("set (uid,gid) for file-permissions checking to (%s,%s)" % (self.uid,self.gid))
except KeyError, (e,):
log.msg("""
COULD NOT SET ANONYMOUS UID! Name %s could not be found.
We will continue using the user %s.
""" % (self.user, pwd.getpwuid(os.getuid())[pw_name]))
def pwd(self):
return self.clientwd
def myjoin(self, lpath, rpath):
"""does a dumb join between two path elements, ensuring
there is only one '/' between them. pays no attention to the
filesystem, unlike os.path.join
@param lpath: path element to the left of the '/' in the result
@type lpath: string
@param rpath: path element to the right of the '/' in the result
@type rpath: string
"""
if lpath and lpath[-1] == os.sep:
lpath = lpath[:-1]
if rpath and rpath[0] == os.sep:
rpath = rpath[1:]
return "%s%s%s" % (lpath, os.sep, rpath)
def mapCPathToSPath(self, rpath):
if not rpath or rpath[0] != '/': # if this is not an absolute path
# add the clients working directory to the requested path
mappedClientPath = self.myjoin(self.clientwd, rpath)
else:
mappedClientPath = rpath
# next add the client's top level directory to the requested path
mappedServerPath = self.myjoin(self.tld, mappedClientPath)
ncpath, nspath = os.path.normpath(mappedClientPath), os.path.normpath(mappedServerPath)
common = os.path.commonprefix([self.tld, nspath])
if common != self.tld:
raise PathBelowTLDError('Cannot access below / directory')
if not os.path.exists(nspath):
raise FileNotFoundError(nspath)
return (mappedClientPath, mappedServerPath)
def cwd(self, path):
cpath, spath = self.mapCPathToSPath(path)
log.debug(cpath, spath)
if os.path.exists(spath) and os.path.isdir(spath):
self.clientwd = cpath
else:
raise FileNotFoundError(cpath)
def cdup(self):
self.cwd('..')
def dele(self, path):
raise AnonUserDeniedError()
def mkd(self, path):
raise AnonUserDeniedError()
def rmd(self, path):
raise AnonUserDeniedError()
def retr(self, path):
import os.path as osp
cpath, spath = self.mapCPathToSPath(path)
if not osp.isfile(spath):
raise FileNotFoundError(cpath)
#if not _testPermissions(self.uid, self.gid, spath):
#raise PermissionDeniedError(cpath)
try:
return (file(spath, 'rb'), os.path.getsize(spath))
except (IOError, OSError), (e,):
log.debug(e)
raise OperationFailedError('An OSError occurred %s' % e)
def stor(self, params):
raise AnonUserDeniedError()
def getUnixLongListString(self, spath):
"""generates the equivalent output of a unix ls -l path, but
using python-native code.
@param path: the path to return the listing for
@type path: string
@attention: this has only been tested on posix systems, I don't
know at this point whether or not it will work on win32
"""
import pwd, grp, time
TYPE, PMSTR, NLINKS, OWN, GRP, SZ, MTIME, NAME = range(8)
if os.path.isdir(spath):
log.debug('list path isdir')
dlist = os.listdir(spath)
log.debug(dlist)
dlist.sort()
else:
log.debug('list path is not dir')
dlist = [spath]
pstat = None
result = []
sio = StringIO()
maxNameWidth, maxOwnWidth, maxGrpWidth, maxSizeWidth, maxNlinksWidth = 0, 0, 0, 0, 0
for item in dlist:
try:
pstat = os.lstat(os.path.join(spath, item))
# this is exarkun's bit of magic
fmt = 'pld----'
pmask = lambda mode: ''.join([mode & (256 >> n) and 'rwx'[n % 3] or '-' for n in range(9)])
dtype = lambda mode: [fmt[i] for i in range(7) if (mode >> 12) & (1 << i)][0]
type = dtype(pstat.st_mode)
pmstr = pmask(pstat.st_mode)
nlinks = str(pstat.st_nlink)
owner = _callWithDefault([str(pstat.st_uid)], pwd.getpwuid, pstat.st_uid)[0]
group = _callWithDefault([str(pstat.st_gid)], grp.getgrgid, pstat.st_gid)[0]
size = str(pstat.st_size)
mtime = time.strftime('%b %d %I:%M', time.gmtime(pstat.st_mtime))
name = os.path.split(item)[1]
unixpms = "%s%s" % (type,pmstr)
except (OSError, KeyError), e:
log.debug(e)
continue
if len(name) > maxNameWidth:
maxNameWidth = len(name)
if len(owner) > maxOwnWidth:
maxOwnWidth = len(owner)
if len(group) > maxGrpWidth:
maxGrpWidth = len(group)
if len(size) > maxSizeWidth:
maxSizeWidth = len(size)
if len(nlinks) > maxNlinksWidth:
maxNlinksWidth = len(nlinks)
result.append([type, pmstr, nlinks, owner, group, size, mtime, name])
for r in result:
r[OWN] = r[OWN].ljust(maxOwnWidth)
r[GRP] = r[GRP].ljust(maxGrpWidth)
r[SZ] = r[SZ].rjust(maxSizeWidth)
#r[NAME] = r[NAME].ljust(maxNameWidth)
r[NLINKS] = r[NLINKS].rjust(maxNlinksWidth)
sio.write('%s%s %s %s %s %s %8s %s\n' % tuple(r))
sio.seek(0)
return sio
def list(self, path):
cpath, spath = self.mapCPathToSPath(path)
log.debug('cpath: %s, spath:%s' % (cpath, spath))
#if not _testPermissions(self.uid, self.gid, spath):
#raise PermissionDeniedError(cpath)
sio = self.getUnixLongListString(spath)
return (sio, len(sio.getvalue()))
def mdtm(self, path):
cpath, spath = self.mapCPathToSPath(path)
if not os.path.isfile(spath):
raise FileNotFoundError(spath)
try:
dtm = time.strftime("%Y%m%d%H%M%S", time.gmtime(os.path.getmtime(spath)))
except OSError, (e,):
log.err(e)
raise OperationFailedError(e)
else:
return dtm
def size(self, path):
"""returns the size in bytes of path"""
cpath, spath = self.mapCPathToSPath(path)
if not os.path.isfile(spath):
raise FileNotFoundError(spath)
return os.path.getsize(spath)
def nlist(self, path):
raise CmdNotImplementedError()
FTPAnonymousShell = AnonymousShell
class Realm:
__implements__ = (portal.IRealm,)
clientwd = '/'
user = 'anonymous'
logout = None
tld = None
def __init__(self, tld=None, logout=None):
"""constructor
@param tld: the top-level (i.e. root) directory on the server
@type tld: string
@attention: you *must* set tld somewhere before using the avatar!!
@param logout: a special logout routine you want to be run when the user
logs out (cleanup)
@type logout: a function/method object
"""
self.tld = tld
self.logout = logout
def requestAvatar(self, avatarId, mind, *interfaces):
if IShell in interfaces:
if self.tld is None:
raise TLDNotSetInRealmError("you must set Realm's tld to a non-None value before creating avatars!!!")
avatar = AnonymousShell(user=self.user, tld=self.tld)
avatar.clientwd = self.clientwd
avatar.logout = self.logout
return IShell, avatar, avatar.logout
raise NotImplementedError("Only IShell interface is supported by this realm")
FTPRealm = Realm
# --- FTP CLIENT -------------------------------------------------------------
from twisted.internet.defer import Deferred, DeferredList, FAILURE
from twisted.python.failure import Failure
from twisted.internet.protocol import ClientFactory, ServerFactory, Protocol, \
ConsumerToProtocolAdapter
from twisted.internet.interfaces import IProducer, IConsumer, IProtocol, IFinishableConsumer
####
# And now for the client...
# Notes:
# * Reference: http://cr.yp.to/ftp.html
# * FIXME: Does not support pipelining (which is not supported by all
# servers anyway). This isn't a functionality limitation, just a
# small performance issue.
# * Only has a rudimentary understanding of FTP response codes (although
# the full response is passed to the caller if they so choose).
# * Assumes that USER and PASS should always be sent
# * Always sets TYPE I (binary mode)
# * Doesn't understand any of the weird, obscure TELNET stuff (\377...)
# * FIXME: Doesn't share any code with the FTPServer
class FTPError(Exception):
pass
class ConnectionLost(FTPError):
pass
class CommandFailed(FTPError):
pass
class BadResponse(FTPError):
pass
class UnexpectedResponse(FTPError):
pass
class FTPCommand:
def __init__(self, text=None, public=0):
self.text = text
self.deferred = Deferred()
self.ready = 1
self.public = public
def fail(self, failure):
if self.public:
self.deferred.errback(failure)
class ProtocolWrapper(Protocol):
def __init__(self, original, deferred):
self.original = original
self.deferred = deferred
def makeConnection(self, transport):
self.original.makeConnection(transport)
def dataReceived(self, data):
self.original.dataReceived(data)
def connectionLost(self, reason):
self.original.connectionLost(reason)
# Signal that transfer has completed
self.deferred.callback(None)
class SenderProtocol(Protocol):
__implements__ = Protocol.__implements__ + (IFinishableConsumer,)
def __init__(self):
# Fired upon connection
self.connectedDeferred = Deferred()
# Fired upon disconnection
self.deferred = Deferred()
#Protocol stuff
def dataReceived(self, data):
assert 0, ("We received data from the server - "
"this shouldn't happen.")
def makeConnection(self, transport):
Protocol.makeConnection(self, transport)
self.connectedDeferred.callback(self)
def connectionLost(self, reason):
if reason.check(error.ConnectionDone):
self.deferred.callback('connection done')
else:
self.deferred.errback(reason)
#IFinishableConsumer stuff
def write(self, data):
self.transport.write(data)
def registerProducer(self):
pass
def unregisterProducer(self):
pass
def finish(self):
self.transport.loseConnection()
def decodeHostPort(line):
"""Decode an FTP response specifying a host and port.
@returns: a 2-tuple of (host, port).
"""
abcdef = re.sub('[^0-9, ]', '', line[4:])
a, b, c, d, e, f = map(str.strip, abcdef.split(','))
host = "%s.%s.%s.%s" % (a, b, c, d)
port = (int(e)<<8) + int(f)
return host, port
class FTPDataPortFactory(ServerFactory):
"""Factory for data connections that use the PORT command
(i.e. "active" transfers)
"""
noisy = 0
def buildProtocol(self, connection):
# This is a bit hackish -- we already have a Protocol instance,
# so just return it instead of making a new one
# FIXME: Reject connections from the wrong address/port
# (potential security problem)
self.protocol.factory = self
self.port.loseConnection()
return self.protocol
class FTPClient(basic.LineReceiver):
"""A Twisted FTP Client
Supports active and passive transfers.
This class is semi-stable.
@ivar passive: See description in __init__.
"""
debug = 0
def __init__(self, username='anonymous',
password='twisted@twistedmatrix.com',
passive=1):
"""Constructor.
I will login as soon as I receive the welcome message from the server.
@param username: FTP username
@param password: FTP password
@param passive: flag that controls if I use active or passive data
connections. You can also change this after construction by
assigning to self.passive.
"""
self.username = username
self.password = password
self.actionQueue = []
self.nextDeferred = None
self.queueLogin()
self.response = []
self.passive = passive
def fail(self, error):
"""Disconnect, and also give an error to any queued deferreds."""
self.transport.loseConnection()
while self.actionQueue:
ftpCommand = self.popCommandQueue()
ftpCommand.fail(Failure(ConnectionLost('FTP connection lost', error)))
return error
def sendLine(self, line):
"""(Private) Sends a line, unless line is None."""
if line is None:
return
basic.LineReceiver.sendLine(self, line)
def sendNextCommand(self):
"""(Private) Processes the next command in the queue."""
ftpCommand = self.popCommandQueue()
if ftpCommand is None:
self.nextDeferred = None
return
if not ftpCommand.ready:
self.actionQueue.insert(0, ftpCommand)
reactor.callLater(1.0, self.sendNextCommand)
self.nextDeferred = None
return
if ftpCommand.text == 'PORT':
self.generatePortCommand(ftpCommand)
if self.debug:
log.msg('<-- %s' % ftpCommand.text)
self.nextDeferred = ftpCommand.deferred
self.sendLine(ftpCommand.text)
def queueLogin(self):
"""Initialise the connection.
Login, send the password, set retrieval mode to binary"""
self.nextDeferred = Deferred().addErrback(self.fail)
for command in ('USER ' + self.username,
'PASS ' + self.password,
'TYPE I',):
d = self.queueStringCommand(command, public=0)
# If something goes wrong, call fail
d.addErrback(self.fail)
# But also swallow the error, so we don't cause spurious errors
d.addErrback(lambda x: None)
def queueCommand(self, ftpCommand):
"""Add an FTPCommand object to the queue.
If it's the only thing in the queue, and we are connected and we aren't
waiting for a response of an earlier command, the command will be sent
immediately.
@param ftpCommand: an L{FTPCommand}
"""
self.actionQueue.append(ftpCommand)
if (len(self.actionQueue) == 1 and self.transport is not None and
self.nextDeferred is None):
self.sendNextCommand()
def popCommandQueue(self):
"""Return the front element of the command queue, or None if empty."""
if self.actionQueue:
return self.actionQueue.pop(0)
else:
return None
def receiveFromConnection(self, commands, protocol):
"""
Retrieves a file or listing generated by the given command,
feeding it to the given protocol.
@param command: list of strings of FTP commands to execute then receive
the results of (e.g. LIST, RETR)
@param protocol: A L{Protocol} *instance* e.g. an
L{FTPFileListProtocol}, or something that can be adapted to one.
Typically this will be an L{IConsumer} implemenation.
@returns: L{Deferred}.
"""
protocol = IProtocol(protocol)
wrapper = ProtocolWrapper(protocol, Deferred())
return self._openDataConnection(commands, wrapper)
def sendToConnection(self, commands):
"""XXX
@returns: A tuple of two L{Deferred}s:
- L{Deferred} L{IFinishableConsumer}. You must call
the C{finish} method on the IFinishableConsumer when the file
is completely transferred.
- L{Deferred} list of control-connection responses.
"""
s = SenderProtocol()
r = self._openDataConnection(commands, s)
return (s.connectedDeferred, r)
def _openDataConnection(self, commands, protocol):
"""
This method returns a DeferredList.
"""
cmds = [FTPCommand(command, public=1) for command in commands]
cmdsDeferred = DeferredList([cmd.deferred for cmd in cmds])
if self.passive:
# Hack: use a mutable object to sneak a variable out of the
# scope of doPassive
_mutable = [None]
def doPassive(response):
"""Connect to the port specified in the response to PASV"""
host, port = decodeHostPort(response[-1])
class _Factory(ClientFactory):
noisy = 0
def buildProtocol(self, ignored):
self.protocol.factory = self
return self.protocol
def clientConnectionFailed(self, connector, reason):
e = FTPError('Connection Failed', reason)
self.protocol.deferred.errback(e)
f = _Factory()
f.protocol = protocol
_mutable[0] = reactor.connectTCP(host, port, f)
pasvCmd = FTPCommand('PASV')
self.queueCommand(pasvCmd)
pasvCmd.deferred.addCallback(doPassive).addErrback(self.fail)
results = [cmdsDeferred, pasvCmd.deferred, protocol.deferred]
d = DeferredList(results, fireOnOneErrback=1)
# Ensure the connection is always closed
def close(x, m=_mutable):
m[0] and m[0].disconnect()
return x
d.addBoth(close)
else:
# We just place a marker command in the queue, and will fill in
# the host and port numbers later (see generatePortCommand)
portCmd = FTPCommand('PORT')
# Ok, now we jump through a few hoops here.
# This is the problem: a transfer is not to be trusted as complete
# until we get both the "226 Transfer complete" message on the
# control connection, and the data socket is closed. Thus, we use
# a DeferredList to make sure we only fire the callback at the
# right time.
portCmd.transferDeferred = protocol.deferred
portCmd.protocol = protocol
portCmd.deferred.addErrback(portCmd.transferDeferred.errback)
self.queueCommand(portCmd)
# Create dummy functions for the next callback to call.
# These will also be replaced with real functions in
# generatePortCommand.
portCmd.loseConnection = lambda result: result
portCmd.fail = lambda error: error
# Ensure that the connection always gets closed
cmdsDeferred.addErrback(lambda e, pc=portCmd: pc.fail(e) or e)
results = [cmdsDeferred, portCmd.deferred, portCmd.transferDeferred]
d = DeferredList(results, fireOnOneErrback=1)
for cmd in cmds:
self.queueCommand(cmd)
return d
def generatePortCommand(self, portCmd):
"""(Private) Generates the text of a given PORT command"""
# The problem is that we don't create the listening port until we need
# it for various reasons, and so we have to muck about to figure out
# what interface and port it's listening on, and then finally we can
# create the text of the PORT command to send to the FTP server.
# FIXME: This method is far too ugly.
# FIXME: The best solution is probably to only create the data port
# once per FTPClient, and just recycle it for each new download.
# This should be ok, because we don't pipeline commands.
# Start listening on a port
factory = FTPDataPortFactory()
factory.protocol = portCmd.protocol
listener = reactor.listenTCP(0, factory)
factory.port = listener
# Ensure we close the listening port if something goes wrong
def listenerFail(error, listener=listener):
if listener.connected:
listener.loseConnection()
return error
portCmd.fail = listenerFail
# Construct crufty FTP magic numbers that represent host & port
host = self.transport.getHost()[1]
port = listener.getHost()[2]
numbers = string.split(host, '.') + [str(port >> 8), str(port % 256)]
portCmd.text = 'PORT ' + string.join(numbers,',')
def escapePath(self, path):
"""Returns a FTP escaped path (replace newlines with nulls)"""
# Escape newline characters
return string.replace(path, '\n', '\0')
def retrieveFile(self, path, protocol, offset=0):
"""Retrieve a file from the given path
This method issues the 'RETR' FTP command.
The file is fed into the given Protocol instance. The data connection
will be passive if self.passive is set.
@param path: path to file that you wish to receive.
@param protocol: a L{Protocol} instance.
@param offset: offset to start downloading from
@returns: L{Deferred}
"""
cmds = ['RETR ' + self.escapePath(path)]
if offset:
cmds.insert(0, ('REST ' + str(offset)))
return self.receiveFromConnection(cmds, protocol)
retr = retrieveFile
def storeFile(self, path, offset=0):
"""Store a file at the given path.
This method issues the 'STOR' FTP command.
@returns: A tuple of two L{Deferred}s:
- L{Deferred} L{IFinishableConsumer}. You must call
the C{finish} method on the IFinishableConsumer when the file
is completely transferred.
- L{Deferred} list of control-connection responses.
"""
cmds = ['STOR ' + self.escapePath(path)]
if offset:
cmds.insert(0, ('REST ' + str(offset)))
return self.sendToConnection(cmds)
stor = storeFile
def list(self, path, protocol):
"""Retrieve a file listing into the given protocol instance.
This method issues the 'LIST' FTP command.
@param path: path to get a file listing for.
@param protocol: a L{Protocol} instance, probably a
L{FTPFileListProtocol} instance. It can cope with most common file
listing formats.
@returns: L{Deferred}
"""
if path is None:
path = ''
return self.receiveFromConnection('LIST ' + self.escapePath(path), protocol)
def nlst(self, path, protocol):
"""Retrieve a short file listing into the given protocol instance.
This method issues the 'NLST' FTP command.
NLST (should) return a list of filenames, one per line.
@param path: path to get short file listing for.
@param protocol: a L{Protocol} instance.
"""
if path is None:
path = ''
return self.receiveFromConnection('NLST ' + self.escapePath(path), protocol)
def queueStringCommand(self, command, public=1):
"""Queues a string to be issued as an FTP command
@param command: string of an FTP command to queue
@param public: a flag intended for internal use by FTPClient. Don't
change it unless you know what you're doing.
@returns: a L{Deferred} that will be called when the response to the
command has been received.
"""
ftpCommand = FTPCommand(command, public)
self.queueCommand(ftpCommand)
return ftpCommand.deferred
def cwd(self, path):
"""Issues the CWD (Change Working Directory) command.
@returns: a L{Deferred} that will be called when done.
"""
return self.queueStringCommand('CWD ' + self.escapePath(path))
def cdup(self):
"""Issues the CDUP (Change Directory UP) command.
@returns: a L{Deferred} that will be called when done.
"""
return self.queueStringCommand('CDUP')
def pwd(self):
"""Issues the PWD (Print Working Directory) command.
@returns: a L{Deferred} that will be called when done. It is up to the
caller to interpret the response, but the L{parsePWDResponse} method
in this module should work.
"""
return self.queueStringCommand('PWD')
def quit(self):
"""Issues the QUIT command."""
return self.queueStringCommand('QUIT')
def lineReceived(self, line):
"""(Private) Parses the response messages from the FTP server."""
# Add this line to the current response
if self.debug:
log.msg('--> %s' % line)
line = string.rstrip(line)
self.response.append(line)
code = line[0:3]
# Bail out if this isn't the last line of a response
# The last line of response starts with 3 digits followed by a space
codeIsValid = len(filter(lambda c: c in '0123456789', code)) == 3
if not (codeIsValid and line[3] == ' '):
return
# Ignore marks
if code[0] == '1':
return
# Check that we were expecting a response
if self.nextDeferred is None:
self.fail(UnexpectedResponse(self.response))
return
# Reset the response
response = self.response
self.response = []
# Look for a success or error code, and call the appropriate callback
if code[0] in ('2', '3'):
# Success
self.nextDeferred.callback(response)
elif code[0] in ('4', '5'):
# Failure
self.nextDeferred.errback(Failure(CommandFailed(response)))
else:
# This shouldn't happen unless something screwed up.
log.msg('Server sent invalid response code %s' % (code,))
self.nextDeferred.errback(Failure(BadResponse(response)))
# Run the next command
self.sendNextCommand()
class FTPFileListProtocol(basic.LineReceiver):
"""Parser for standard FTP file listings
This is the evil required to match::
-rw-r--r-- 1 root other 531 Jan 29 03:26 README
If you need different evil for a wacky FTP server, you can override this.
It populates the instance attribute self.files, which is a list containing
dicts with the following keys (examples from the above line):
- filetype: e.g. 'd' for directories, or '-' for an ordinary file
- perms: e.g. 'rw-r--r--'
- owner: e.g. 'root'
- group: e.g. 'other'
- size: e.g. 531
- date: e.g. 'Jan 29 03:26'
- filename: e.g. 'README'
Note that the 'date' value will be formatted differently depending on the
date. Check U{http://cr.yp.to/ftp.html} if you really want to try to parse
it.
@ivar files: list of dicts describing the files in this listing
"""
fileLinePattern = re.compile(
r'^(?P<filetype>.)(?P<perms>.{9})\s+\d*\s*'
r'(?P<owner>\S+)\s+(?P<group>\S+)\s+(?P<size>\d+)\s+'
r'(?P<date>... .. ..:..)\s+(?P<filename>.*?)\r?$'
)
delimiter = '\n'
def __init__(self):
self.files = []
def lineReceived(self, line):
match = self.fileLinePattern.match(line)
if match:
dict = match.groupdict()
dict['size'] = int(dict['size'])
self.files.append(dict)
def parsePWDResponse(response):
"""Returns the path from a response to a PWD command.
Responses typically look like::
257 "/home/andrew" is current directory.
For this example, I will return C{'/home/andrew'}.
If I can't find the path, I return C{None}.
"""
match = re.search('".*"', response)
if match:
return match.groups()[0]
else:
return None